summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/timer/ti,davinci-timer.txt37
1 files changed, 37 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 000000000..29bf91ccf
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,37 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values.
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+ "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+ "cmpint7" ("cmpintX" may be omitted if not present in the
+ hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+ clocksource: timer@20000 {
+ compatible = "ti,da830-timer";
+ reg = <0x20000 0x1000>;
+ interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+ <80>, <81>;
+ interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+ "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+ "cmpint6", "cmpint7";
+ clocks = <&pll0_auxclk>;
+ };