diff options
Diffstat (limited to 'Documentation/driver-api/nvmem.rst')
| -rw-r--r-- | Documentation/driver-api/nvmem.rst | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/Documentation/driver-api/nvmem.rst b/Documentation/driver-api/nvmem.rst new file mode 100644 index 000000000..287e86819 --- /dev/null +++ b/Documentation/driver-api/nvmem.rst @@ -0,0 +1,191 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +NVMEM Subsystem +=============== + + Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +This document explains the NVMEM Framework along with the APIs provided, +and how to use it. + +1. Introduction +=============== +*NVMEM* is the abbreviation for Non Volatile Memory layer. It is used to +retrieve configuration of SOC or Device specific data from non volatile +memories like eeprom, efuses and so on. + +Before this framework existed, NVMEM drivers like eeprom were stored in +drivers/misc, where they all had to duplicate pretty much the same code to +register a sysfs file, allow in-kernel users to access the content of the +devices they were driving, etc. + +This was also a problem as far as other in-kernel users were involved, since +the solutions used were pretty much different from one driver to another, there +was a rather big abstraction leak. + +This framework aims at solve these problems. It also introduces DT +representation for consumer devices to go get the data they require (MAC +Addresses, SoC/Revision ID, part numbers, and so on) from the NVMEMs. This +framework is based on regmap, so that most of the abstraction available in +regmap can be reused, across multiple types of buses. + +NVMEM Providers ++++++++++++++++ + +NVMEM provider refers to an entity that implements methods to initialize, read +and write the non-volatile memory. + +2. Registering/Unregistering the NVMEM provider +=============================================== + +A NVMEM provider can register with NVMEM core by supplying relevant +nvmem configuration to nvmem_register(), on success core would return a valid +nvmem_device pointer. + +nvmem_unregister(nvmem) is used to unregister a previously registered provider. + +For example, a simple qfprom case:: + + static struct nvmem_config econfig = { + .name = "qfprom", + .owner = THIS_MODULE, + }; + + static int qfprom_probe(struct platform_device *pdev) + { + ... + econfig.dev = &pdev->dev; + nvmem = nvmem_register(&econfig); + ... + } + +It is mandatory that the NVMEM provider has a regmap associated with its +struct device. Failure to do would return error code from nvmem_register(). + +Users of board files can define and register nvmem cells using the +nvmem_cell_table struct:: + + static struct nvmem_cell_info foo_nvmem_cells[] = { + { + .name = "macaddr", + .offset = 0x7f00, + .bytes = ETH_ALEN, + } + }; + + static struct nvmem_cell_table foo_nvmem_cell_table = { + .nvmem_name = "i2c-eeprom", + .cells = foo_nvmem_cells, + .ncells = ARRAY_SIZE(foo_nvmem_cells), + }; + + nvmem_add_cell_table(&foo_nvmem_cell_table); + +Additionally it is possible to create nvmem cell lookup entries and register +them with the nvmem framework from machine code as shown in the example below:: + + static struct nvmem_cell_lookup foo_nvmem_lookup = { + .nvmem_name = "i2c-eeprom", + .cell_name = "macaddr", + .dev_id = "foo_mac.0", + .con_id = "mac-address", + }; + + nvmem_add_cell_lookups(&foo_nvmem_lookup, 1); + +NVMEM Consumers ++++++++++++++++ + +NVMEM consumers are the entities which make use of the NVMEM provider to +read from and to NVMEM. + +3. NVMEM cell based consumer APIs +================================= + +NVMEM cells are the data entries/fields in the NVMEM. +The NVMEM framework provides 3 APIs to read/write NVMEM cells:: + + struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *name); + struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *name); + + void nvmem_cell_put(struct nvmem_cell *cell); + void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + + void *nvmem_cell_read(struct nvmem_cell *cell, ssize_t *len); + int nvmem_cell_write(struct nvmem_cell *cell, void *buf, ssize_t len); + +`*nvmem_cell_get()` apis will get a reference to nvmem cell for a given id, +and nvmem_cell_read/write() can then read or write to the cell. +Once the usage of the cell is finished the consumer should call +`*nvmem_cell_put()` to free all the allocation memory for the cell. + +4. Direct NVMEM device based consumer APIs +========================================== + +In some instances it is necessary to directly read/write the NVMEM. +To facilitate such consumers NVMEM framework provides below apis:: + + struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); + struct nvmem_device *devm_nvmem_device_get(struct device *dev, + const char *name); + struct nvmem_device *nvmem_device_find(void *data, + int (*match)(struct device *dev, const void *data)); + void nvmem_device_put(struct nvmem_device *nvmem); + int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); + int nvmem_device_write(struct nvmem_device *nvmem, unsigned int offset, + size_t bytes, void *buf); + int nvmem_device_cell_read(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + int nvmem_device_cell_write(struct nvmem_device *nvmem, + struct nvmem_cell_info *info, void *buf); + +Before the consumers can read/write NVMEM directly, it should get hold +of nvmem_controller from one of the `*nvmem_device_get()` api. + +The difference between these apis and cell based apis is that these apis always +take nvmem_device as parameter. + +5. Releasing a reference to the NVMEM +===================================== + +When a consumer no longer needs the NVMEM, it has to release the reference +to the NVMEM it has obtained using the APIs mentioned in the above section. +The NVMEM framework provides 2 APIs to release a reference to the NVMEM:: + + void nvmem_cell_put(struct nvmem_cell *cell); + void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell); + void nvmem_device_put(struct nvmem_device *nvmem); + void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem); + +Both these APIs are used to release a reference to the NVMEM and +devm_nvmem_cell_put and devm_nvmem_device_put destroys the devres associated +with this NVMEM. + +Userspace ++++++++++ + +6. Userspace binary interface +============================== + +Userspace can read/write the raw NVMEM file located at:: + + /sys/bus/nvmem/devices/*/nvmem + +ex:: + + hexdump /sys/bus/nvmem/devices/qfprom0/nvmem + + 0000000 0000 0000 0000 0000 0000 0000 0000 0000 + * + 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00 + 0000000 0000 0000 0000 0000 0000 0000 0000 0000 + ... + * + 0001000 + +7. DeviceTree Binding +===================== + +See Documentation/devicetree/bindings/nvmem/nvmem.txt |