diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/firmware-guide/acpi/dsd/data-node-references.rst | 99 | ||||
| -rw-r--r-- | Documentation/firmware-guide/acpi/dsd/graph.rst | 177 | ||||
| -rw-r--r-- | Documentation/firmware-guide/acpi/dsd/leds.rst | 111 |
3 files changed, 387 insertions, 0 deletions
diff --git a/Documentation/firmware-guide/acpi/dsd/data-node-references.rst b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst new file mode 100644 index 000000000..da0e46496 --- /dev/null +++ b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst @@ -0,0 +1,99 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=================================== +Referencing hierarchical data nodes +=================================== + +:Copyright: |copy| 2018, 2021 Intel Corporation +:Author: Sakari Ailus <sakari.ailus@linux.intel.com> + +ACPI in general allows referring to device objects in the tree only. +Hierarchical data extension nodes may not be referred to directly, hence this +document defines a scheme to implement such references. + +A reference consist of the device object name followed by one or more +hierarchical data extension [1] keys. Specifically, the hierarchical data +extension node which is referred to by the key shall lie directly under the +parent object i.e. either the device object or another hierarchical data +extension node. + +The keys in the hierarchical data nodes shall consist of the name of the node, +"@" character and the number of the node in hexadecimal notation (without pre- +or postfixes). The same ACPI object shall include the _DSD property extension +with a property "reg" that shall have the same numerical value as the number of +the node. + +In case a hierarchical data extensions node has no numerical value, then the +"reg" property shall be omitted from the ACPI object's _DSD properties and the +"@" character and the number shall be omitted from the hierarchical data +extension key. + + +Example +======= + +In the ASL snippet below, the "reference" _DSD property [2] contains a +device object reference to DEV0 and under that device object, a +hierarchical data extension key "node@1" referring to the NOD1 object +and lastly, a hierarchical data extension key "anothernode" referring to +the ANOD object which is also the final target node of the reference. +:: + + Device (DEV0) + { + Name (_DSD, Package () { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "node@0", "NOD0" }, + Package () { "node@1", "NOD1" }, + } + }) + Name (NOD0, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "random-property", 3 }, + } + }) + Name (NOD1, Package() { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "reg", 1 }, + Package () { "anothernode", "ANOD" }, + } + }) + Name (ANOD, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "random-property", 0 }, + } + }) + } + + Device (DEV1) + { + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { + "reference", Package () { + ^DEV0, "node@1", "anothernode" + } + }, + } + }) + } + +Please also see a graph example in :doc:`graph`. + +References +========== + +[1] Hierarchical Data Extension UUID For _DSD. +<https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>, +referenced 2018-07-17. + +[2] Device Properties UUID For _DSD. +<https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>, +referenced 2016-10-04. diff --git a/Documentation/firmware-guide/acpi/dsd/graph.rst b/Documentation/firmware-guide/acpi/dsd/graph.rst new file mode 100644 index 000000000..7072db801 --- /dev/null +++ b/Documentation/firmware-guide/acpi/dsd/graph.rst @@ -0,0 +1,177 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====== +Graphs +====== + +_DSD +==== + +_DSD (Device Specific Data) [7] is a predefined ACPI device +configuration object that can be used to convey information on +hardware features which are not specifically covered by the ACPI +specification [1][6]. There are two _DSD extensions that are relevant +for graphs: property [4] and hierarchical data extensions [5]. The +property extension provides generic key-value pairs whereas the +hierarchical data extension supports nodes with references to other +nodes, forming a tree. The nodes in the tree may contain properties as +defined by the property extension. The two extensions together provide +a tree-like structure with zero or more properties (key-value pairs) +in each node of the tree. + +The data structure may be accessed at runtime by using the device_* +and fwnode_* functions defined in include/linux/fwnode.h . + +Fwnode represents a generic firmware node object. It is independent on +the firmware type. In ACPI, fwnodes are _DSD hierarchical data +extensions objects. A device's _DSD object is represented by an +fwnode. + +The data structure may be referenced to elsewhere in the ACPI tables +by using a hard reference to the device itself and an index to the +hierarchical data extension array on each depth. + + +Ports and endpoints +=================== + +The port and endpoint concepts are very similar to those in Devicetree +[3]. A port represents an interface in a device, and an endpoint +represents a connection to that interface. + +All port nodes are located under the device's "_DSD" node in the hierarchical +data extension tree. The data extension related to each port node must begin +with "port" and must be followed by the "@" character and the number of the +port as its key. The target object it refers to should be called "PRTX", where +"X" is the number of the port. An example of such a package would be:: + + Package() { "port@4", "PRT4" } + +Further on, endpoints are located under the port nodes. The hierarchical +data extension key of the endpoint nodes must begin with +"endpoint" and must be followed by the "@" character and the number of the +endpoint. The object it refers to should be called "EPXY", where "X" is the +number of the port and "Y" is the number of the endpoint. An example of such a +package would be:: + + Package() { "endpoint@0", "EP40" } + +Each port node contains a property extension key "port", the value of which is +the number of the port. Each endpoint is similarly numbered with a property +extension key "reg", the value of which is the number of the endpoint. Port +numbers must be unique within a device and endpoint numbers must be unique +within a port. If a device object may only has a single port, then the number +of that port shall be zero. Similarly, if a port may only have a single +endpoint, the number of that endpoint shall be zero. + +The endpoint reference uses property extension with "remote-endpoint" property +name followed by a reference in the same package. Such references consist of +the remote device reference, the first package entry of the port data extension +reference under the device and finally the first package entry of the endpoint +data extension reference under the port. Individual references thus appear as:: + + Package() { device, "port@X", "endpoint@Y" } + +In the above example, "X" is the number of the port and "Y" is the number of +the endpoint. + +The references to endpoints must be always done both ways, to the +remote endpoint and back from the referred remote endpoint node. + +A simple example of this is show below:: + + Scope (\_SB.PCI0.I2C2) + { + Device (CAM0) + { + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "compatible", Package () { "nokia,smia" } }, + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "port@0", "PRT0" }, + } + }) + Name (PRT0, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "endpoint@0", "EP00" }, + } + }) + Name (EP00, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } }, + } + }) + } + } + + Scope (\_SB.PCI0) + { + Device (ISP) + { + Name (_DSD, Package () { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "port@4", "PRT4" }, + } + }) + + Name (PRT4, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 4 }, /* CSI-2 port number */ + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "endpoint@0", "EP40" }, + } + }) + + Name (EP40, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } }, + } + }) + } + } + +Here, the port 0 of the "CAM0" device is connected to the port 4 of +the "ISP" device and vice versa. + + +References +========== + +[1] _DSD (Device Specific Data) Implementation Guide. + https://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm, + referenced 2016-10-03. + +[2] Devicetree. https://www.devicetree.org, referenced 2016-10-03. + +[3] Documentation/devicetree/bindings/graph.txt + +[4] Device Properties UUID For _DSD. + https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf, + referenced 2016-10-04. + +[5] Hierarchical Data Extension UUID For _DSD. + https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf, + referenced 2016-10-04. + +[6] Advanced Configuration and Power Interface Specification. + https://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf, + referenced 2016-10-04. + +[7] _DSD Device Properties Usage Rules. + :doc:`../DSD-properties-rules` diff --git a/Documentation/firmware-guide/acpi/dsd/leds.rst b/Documentation/firmware-guide/acpi/dsd/leds.rst new file mode 100644 index 000000000..aba1e9abf --- /dev/null +++ b/Documentation/firmware-guide/acpi/dsd/leds.rst @@ -0,0 +1,111 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +======================================== +Describing and referring to LEDs in ACPI +======================================== + +Individual LEDs are described by hierarchical data extension [6] nodes under the +device node, the LED driver chip. The "reg" property in the LED specific nodes +tells the numerical ID of each individual LED output to which the LEDs are +connected. [3] The hierarchical data nodes are named "led@X", where X is the +number of the LED output. + +Referring to LEDs in Device tree is documented in [4], in "flash-leds" property +documentation. In short, LEDs are directly referred to by using phandles. + +While Device tree allows referring to any node in the tree[1], in ACPI +references are limited to device nodes only [2]. For this reason using the same +mechanism on ACPI is not possible. A mechanism to refer to non-device ACPI nodes +is documented in [7]. + +ACPI allows (as does DT) using integer arguments after the reference. A +combination of the LED driver device reference and an integer argument, +referring to the "reg" property of the relevant LED, is used to identify +individual LEDs. The value of the "reg" property is a contract between the +firmware and software, it uniquely identifies the LED driver outputs. + +Under the LED driver device, The first hierarchical data extension package list +entry shall contain the string "led@" followed by the number of the LED, +followed by the referred object name. That object shall be named "LED" followed +by the number of the LED. + +Example +======= + +An ASL example of a camera sensor device and a LED driver device for two LEDs is +show below. Objects not relevant for LEDs or the references to them have been +omitted. :: + + Device (LED) + { + Name (_DSD, Package () { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "led@0", LED0 }, + Package () { "led@1", LED1 }, + } + }) + Name (LED0, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "flash-max-microamp", 1000000 }, + Package () { "flash-timeout-us", 200000 }, + Package () { "led-max-microamp", 100000 }, + Package () { "label", "white:flash" }, + } + }) + Name (LED1, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 1 }, + Package () { "led-max-microamp", 10000 }, + Package () { "label", "red:indicator" }, + } + }) + } + + Device (SEN) + { + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { + "flash-leds", + Package () { ^LED, "led@0", ^LED, "led@1" }, + } + } + }) + } + +where +:: + + LED LED driver device + LED0 First LED + LED1 Second LED + SEN Camera sensor device (or another device the LED is related to) + +References +========== + +[1] Device tree. <URL:https://www.devicetree.org>, referenced 2019-02-21. + +[2] Advanced Configuration and Power Interface Specification. + <URL:https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf>, + referenced 2019-02-21. + +[3] Documentation/devicetree/bindings/leds/common.txt + +[4] Documentation/devicetree/bindings/media/video-interfaces.txt + +[5] Device Properties UUID For _DSD. + <URL:https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>, + referenced 2019-02-21. + +[6] Hierarchical Data Extension UUID For _DSD. + <URL:https://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>, + referenced 2019-02-21. + +[7] Documentation/firmware-guide/acpi/dsd/data-node-references.rst |