summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/abituguru.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/hwmon/abituguru.rst113
1 files changed, 113 insertions, 0 deletions
diff --git a/Documentation/hwmon/abituguru.rst b/Documentation/hwmon/abituguru.rst
new file mode 100644
index 000000000..cfda60b75
--- /dev/null
+++ b/Documentation/hwmon/abituguru.rst
@@ -0,0 +1,113 @@
+Kernel driver abituguru
+=======================
+
+Supported chips:
+
+ * Abit uGuru revision 1 & 2 (Hardware Monitor part only)
+
+ Prefix: 'abituguru'
+
+ Addresses scanned: ISA 0x0E0
+
+ Datasheet: Not available, this driver is based on reverse engineering.
+ A "Datasheet" has been written based on the reverse engineering it
+ should be available in the same dir as this file under the name
+ abituguru-datasheet.
+
+ Note:
+ The uGuru is a microcontroller with onboard firmware which programs
+ it to behave as a hwmon IC. There are many different revisions of the
+ firmware and thus effectively many different revisions of the uGuru.
+ Below is an incomplete list with which revisions are used for which
+ Motherboards:
+
+ - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) [1]_
+ - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+ - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+ - uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+ - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+ - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
+ AW9D-MAX) [2]_
+
+.. [1] For revisions 2 and 3 uGuru's the driver can autodetect the
+ sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+ this does not always work. For these uGuru's the autodetection can
+ be overridden with the bank1_types module param. For all 3 known
+ revision 1 motherboards the correct use of this param is:
+ bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+ You may also need to specify the fan_sensors option for these boards
+ fan_sensors=5
+
+.. [2] There is a separate abituguru3 driver for these motherboards,
+ the abituguru (without the 3 !) driver will not work on these
+ motherboards (and visa versa)!
+
+Authors:
+ - Hans de Goede <j.w.r.degoede@hhs.nl>,
+ - (Initial reverse engineering done by Olle Sandberg
+ <ollebull@gmail.com>)
+
+
+Module Parameters
+-----------------
+
+* force: bool
+ Force detection. Note this parameter only causes the
+ detection to be skipped, and thus the insmod to
+ succeed. If the uGuru can't be read the actual hwmon
+ driver will not load and thus no hwmon device will get
+ registered.
+* bank1_types: int[]
+ Bank1 sensortype autodetection override:
+
+ * -1 autodetect (default)
+ * 0 volt sensor
+ * 1 temp sensor
+ * 2 not connected
+* fan_sensors: int
+ Tell the driver how many fan speed sensors there are
+ on your motherboard. Default: 0 (autodetect).
+* pwms: int
+ Tell the driver how many fan speed controls (fan
+ pwms) your motherboard has. Default: 0 (autodetect).
+* verbose: int
+ How verbose should the driver be? (0-3):
+
+ * 0 normal output
+ * 1 + verbose error reporting
+ * 2 + sensors type probing info (default)
+ * 3 + retryable error reporting
+
+ Default: 2 (the driver is still in the testing phase)
+
+Notice: if you need any of the first three options above please insmod the
+driver with verbose set to 3 and mail me <j.w.r.degoede@hhs.nl> the output of:
+dmesg | grep abituguru
+
+
+Description
+-----------
+
+This driver supports the hardware monitoring features of the first and
+second revision of the Abit uGuru chip found on Abit uGuru featuring
+motherboards (most modern Abit motherboards).
+
+The first and second revision of the uGuru chip in reality is a Winbond
+W83L950D in disguise (despite Abit claiming it is "a new microprocessor
+designed by the ABIT Engineers"). Unfortunately this doesn't help since the
+W83L950D is a generic microcontroller with a custom Abit application running
+on it.
+
+Despite Abit not releasing any information regarding the uGuru, Olle
+Sandberg <ollebull@gmail.com> has managed to reverse engineer the sensor part
+of the uGuru. Without his work this driver would not have been possible.
+
+Known Issues
+------------
+
+The voltage and frequency control parts of the Abit uGuru are not supported.
+
+.. toctree::
+ :maxdepth: 1
+
+ abituguru-datasheet.rst