summaryrefslogtreecommitdiffstats
path: root/Documentation/ia64
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/ia64/aliasing.rst246
-rw-r--r--Documentation/ia64/efirtc.rst144
-rw-r--r--Documentation/ia64/err_inject.rst1067
-rw-r--r--Documentation/ia64/fsys.rst303
-rw-r--r--Documentation/ia64/ia64.rst49
-rw-r--r--Documentation/ia64/index.rst17
-rw-r--r--Documentation/ia64/irq-redir.rst80
-rw-r--r--Documentation/ia64/mca.rst198
-rw-r--r--Documentation/ia64/serial.rst165
9 files changed, 2269 insertions, 0 deletions
diff --git a/Documentation/ia64/aliasing.rst b/Documentation/ia64/aliasing.rst
new file mode 100644
index 000000000..a08b36aba
--- /dev/null
+++ b/Documentation/ia64/aliasing.rst
@@ -0,0 +1,246 @@
+==================================
+Memory Attribute Aliasing on IA-64
+==================================
+
+Bjorn Helgaas <bjorn.helgaas@hp.com>
+
+May 4, 2006
+
+
+Memory Attributes
+=================
+
+ Itanium supports several attributes for virtual memory references.
+ The attribute is part of the virtual translation, i.e., it is
+ contained in the TLB entry. The ones of most interest to the Linux
+ kernel are:
+
+ == ======================
+ WB Write-back (cacheable)
+ UC Uncacheable
+ WC Write-coalescing
+ == ======================
+
+ System memory typically uses the WB attribute. The UC attribute is
+ used for memory-mapped I/O devices. The WC attribute is uncacheable
+ like UC is, but writes may be delayed and combined to increase
+ performance for things like frame buffers.
+
+ The Itanium architecture requires that we avoid accessing the same
+ page with both a cacheable mapping and an uncacheable mapping[1].
+
+ The design of the chipset determines which attributes are supported
+ on which regions of the address space. For example, some chipsets
+ support either WB or UC access to main memory, while others support
+ only WB access.
+
+Memory Map
+==========
+
+ Platform firmware describes the physical memory map and the
+ supported attributes for each region. At boot-time, the kernel uses
+ the EFI GetMemoryMap() interface. ACPI can also describe memory
+ devices and the attributes they support, but Linux/ia64 currently
+ doesn't use this information.
+
+ The kernel uses the efi_memmap table returned from GetMemoryMap() to
+ learn the attributes supported by each region of physical address
+ space. Unfortunately, this table does not completely describe the
+ address space because some machines omit some or all of the MMIO
+ regions from the map.
+
+ The kernel maintains another table, kern_memmap, which describes the
+ memory Linux is actually using and the attribute for each region.
+ This contains only system memory; it does not contain MMIO space.
+
+ The kern_memmap table typically contains only a subset of the system
+ memory described by the efi_memmap. Linux/ia64 can't use all memory
+ in the system because of constraints imposed by the identity mapping
+ scheme.
+
+ The efi_memmap table is preserved unmodified because the original
+ boot-time information is required for kexec.
+
+Kernel Identify Mappings
+========================
+
+ Linux/ia64 identity mappings are done with large pages, currently
+ either 16MB or 64MB, referred to as "granules." Cacheable mappings
+ are speculative[2], so the processor can read any location in the
+ page at any time, independent of the programmer's intentions. This
+ means that to avoid attribute aliasing, Linux can create a cacheable
+ identity mapping only when the entire granule supports cacheable
+ access.
+
+ Therefore, kern_memmap contains only full granule-sized regions that
+ can referenced safely by an identity mapping.
+
+ Uncacheable mappings are not speculative, so the processor will
+ generate UC accesses only to locations explicitly referenced by
+ software. This allows UC identity mappings to cover granules that
+ are only partially populated, or populated with a combination of UC
+ and WB regions.
+
+User Mappings
+=============
+
+ User mappings are typically done with 16K or 64K pages. The smaller
+ page size allows more flexibility because only 16K or 64K has to be
+ homogeneous with respect to memory attributes.
+
+Potential Attribute Aliasing Cases
+==================================
+
+ There are several ways the kernel creates new mappings:
+
+mmap of /dev/mem
+----------------
+
+ This uses remap_pfn_range(), which creates user mappings. These
+ mappings may be either WB or UC. If the region being mapped
+ happens to be in kern_memmap, meaning that it may also be mapped
+ by a kernel identity mapping, the user mapping must use the same
+ attribute as the kernel mapping.
+
+ If the region is not in kern_memmap, the user mapping should use
+ an attribute reported as being supported in the EFI memory map.
+
+ Since the EFI memory map does not describe MMIO on some
+ machines, this should use an uncacheable mapping as a fallback.
+
+mmap of /sys/class/pci_bus/.../legacy_mem
+-----------------------------------------
+
+ This is very similar to mmap of /dev/mem, except that legacy_mem
+ only allows mmap of the one megabyte "legacy MMIO" area for a
+ specific PCI bus. Typically this is the first megabyte of
+ physical address space, but it may be different on machines with
+ several VGA devices.
+
+ "X" uses this to access VGA frame buffers. Using legacy_mem
+ rather than /dev/mem allows multiple instances of X to talk to
+ different VGA cards.
+
+ The /dev/mem mmap constraints apply.
+
+mmap of /proc/bus/pci/.../??.?
+------------------------------
+
+ This is an MMIO mmap of PCI functions, which additionally may or
+ may not be requested as using the WC attribute.
+
+ If WC is requested, and the region in kern_memmap is either WC
+ or UC, and the EFI memory map designates the region as WC, then
+ the WC mapping is allowed.
+
+ Otherwise, the user mapping must use the same attribute as the
+ kernel mapping.
+
+read/write of /dev/mem
+----------------------
+
+ This uses copy_from_user(), which implicitly uses a kernel
+ identity mapping. This is obviously safe for things in
+ kern_memmap.
+
+ There may be corner cases of things that are not in kern_memmap,
+ but could be accessed this way. For example, registers in MMIO
+ space are not in kern_memmap, but could be accessed with a UC
+ mapping. This would not cause attribute aliasing. But
+ registers typically can be accessed only with four-byte or
+ eight-byte accesses, and the copy_from_user() path doesn't allow
+ any control over the access size, so this would be dangerous.
+
+ioremap()
+---------
+
+ This returns a mapping for use inside the kernel.
+
+ If the region is in kern_memmap, we should use the attribute
+ specified there.
+
+ If the EFI memory map reports that the entire granule supports
+ WB, we should use that (granules that are partially reserved
+ or occupied by firmware do not appear in kern_memmap).
+
+ If the granule contains non-WB memory, but we can cover the
+ region safely with kernel page table mappings, we can use
+ ioremap_page_range() as most other architectures do.
+
+ Failing all of the above, we have to fall back to a UC mapping.
+
+Past Problem Cases
+==================
+
+mmap of various MMIO regions from /dev/mem by "X" on Intel platforms
+--------------------------------------------------------------------
+
+ The EFI memory map may not report these MMIO regions.
+
+ These must be allowed so that X will work. This means that
+ when the EFI memory map is incomplete, every /dev/mem mmap must
+ succeed. It may create either WB or UC user mappings, depending
+ on whether the region is in kern_memmap or the EFI memory map.
+
+mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
+----------------------------------------------------------------------
+
+ The EFI memory map reports the following attributes:
+
+ =============== ======= ==================
+ 0x00000-0x9FFFF WB only
+ 0xA0000-0xBFFFF UC only (VGA frame buffer)
+ 0xC0000-0xFFFFF WB only
+ =============== ======= ==================
+
+ This mmap is done with user pages, not kernel identity mappings,
+ so it is safe to use WB mappings.
+
+ The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000,
+ which uses a granule-sized UC mapping. This granule will cover some
+ WB-only memory, but since UC is non-speculative, the processor will
+ never generate an uncacheable reference to the WB-only areas unless
+ the driver explicitly touches them.
+
+mmap of 0x0-0xFFFFF legacy_mem by "X"
+-------------------------------------
+
+ If the EFI memory map reports that the entire range supports the
+ same attributes, we can allow the mmap (and we will prefer WB if
+ supported, as is the case with HP sx[12]000 machines with VGA
+ disabled).
+
+ If EFI reports the range as partly WB and partly UC (as on sx[12]000
+ machines with VGA enabled), we must fail the mmap because there's no
+ safe attribute to use.
+
+ If EFI reports some of the range but not all (as on Intel firmware
+ that doesn't report the VGA frame buffer at all), we should fail the
+ mmap and force the user to map just the specific region of interest.
+
+mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled
+------------------------------------------------------------------------
+
+ The EFI memory map reports the following attributes::
+
+ 0x00000-0xFFFFF WB only (no VGA MMIO hole)
+
+ This is a special case of the previous case, and the mmap should
+ fail for the same reason as above.
+
+read of /sys/devices/.../rom
+----------------------------
+
+ For VGA devices, this may cause an ioremap() of 0xC0000. This
+ used to be done with a UC mapping, because the VGA frame buffer
+ at 0xA0000 prevents use of a WB granule. The UC mapping causes
+ an MCA on HP sx[12]000 chipsets.
+
+ We should use WB page table mappings to avoid covering the VGA
+ frame buffer.
+
+Notes
+=====
+
+ [1] SDM rev 2.2, vol 2, sec 4.4.1.
+ [2] SDM rev 2.2, vol 2, sec 4.4.6.
diff --git a/Documentation/ia64/efirtc.rst b/Documentation/ia64/efirtc.rst
new file mode 100644
index 000000000..fd8328408
--- /dev/null
+++ b/Documentation/ia64/efirtc.rst
@@ -0,0 +1,144 @@
+==========================
+EFI Real Time Clock driver
+==========================
+
+S. Eranian <eranian@hpl.hp.com>
+
+March 2000
+
+1. Introduction
+===============
+
+This document describes the efirtc.c driver has provided for
+the IA-64 platform.
+
+The purpose of this driver is to supply an API for kernel and user applications
+to get access to the Time Service offered by EFI version 0.92.
+
+EFI provides 4 calls one can make once the OS is booted: GetTime(),
+SetTime(), GetWakeupTime(), SetWakeupTime() which are all supported by this
+driver. We describe those calls as well the design of the driver in the
+following sections.
+
+2. Design Decisions
+===================
+
+The original ideas was to provide a very simple driver to get access to,
+at first, the time of day service. This is required in order to access, in a
+portable way, the CMOS clock. A program like /sbin/hwclock uses such a clock
+to initialize the system view of the time during boot.
+
+Because we wanted to minimize the impact on existing user-level apps using
+the CMOS clock, we decided to expose an API that was very similar to the one
+used today with the legacy RTC driver (driver/char/rtc.c). However, because
+EFI provides a simpler services, not all ioctl() are available. Also
+new ioctl()s have been introduced for things that EFI provides but not the
+legacy.
+
+EFI uses a slightly different way of representing the time, noticeably
+the reference date is different. Year is the using the full 4-digit format.
+The Epoch is January 1st 1998. For backward compatibility reasons we don't
+expose this new way of representing time. Instead we use something very
+similar to the struct tm, i.e. struct rtc_time, as used by hwclock.
+One of the reasons for doing it this way is to allow for EFI to still evolve
+without necessarily impacting any of the user applications. The decoupling
+enables flexibility and permits writing wrapper code is ncase things change.
+
+The driver exposes two interfaces, one via the device file and a set of
+ioctl()s. The other is read-only via the /proc filesystem.
+
+As of today we don't offer a /proc/sys interface.
+
+To allow for a uniform interface between the legacy RTC and EFI time service,
+we have created the include/linux/rtc.h header file to contain only the
+"public" API of the two drivers. The specifics of the legacy RTC are still
+in include/linux/mc146818rtc.h.
+
+
+3. Time of day service
+======================
+
+The part of the driver gives access to the time of day service of EFI.
+Two ioctl()s, compatible with the legacy RTC calls:
+
+ Read the CMOS clock::
+
+ ioctl(d, RTC_RD_TIME, &rtc);
+
+ Write the CMOS clock::
+
+ ioctl(d, RTC_SET_TIME, &rtc);
+
+The rtc is a pointer to a data structure defined in rtc.h which is close
+to a struct tm::
+
+ struct rtc_time {
+ int tm_sec;
+ int tm_min;
+ int tm_hour;
+ int tm_mday;
+ int tm_mon;
+ int tm_year;
+ int tm_wday;
+ int tm_yday;
+ int tm_isdst;
+ };
+
+The driver takes care of converting back an forth between the EFI time and
+this format.
+
+Those two ioctl()s can be exercised with the hwclock command:
+
+For reading::
+
+ # /sbin/hwclock --show
+ Mon Mar 6 15:32:32 2000 -0.910248 seconds
+
+For setting::
+
+ # /sbin/hwclock --systohc
+
+Root privileges are required to be able to set the time of day.
+
+4. Wakeup Alarm service
+=======================
+
+EFI provides an API by which one can program when a machine should wakeup,
+i.e. reboot. This is very different from the alarm provided by the legacy
+RTC which is some kind of interval timer alarm. For this reason we don't use
+the same ioctl()s to get access to the service. Instead we have
+introduced 2 news ioctl()s to the interface of an RTC.
+
+We have added 2 new ioctl()s that are specific to the EFI driver:
+
+ Read the current state of the alarm::
+
+ ioctl(d, RTC_WKALM_RD, &wkt)
+
+ Set the alarm or change its status::
+
+ ioctl(d, RTC_WKALM_SET, &wkt)
+
+The wkt structure encapsulates a struct rtc_time + 2 extra fields to get
+status information::
+
+ struct rtc_wkalrm {
+
+ unsigned char enabled; /* =1 if alarm is enabled */
+ unsigned char pending; /* =1 if alarm is pending */
+
+ struct rtc_time time;
+ }
+
+As of today, none of the existing user-level apps supports this feature.
+However writing such a program should be hard by simply using those two
+ioctl().
+
+Root privileges are required to be able to set the alarm.
+
+5. References
+=============
+
+Checkout the following Web site for more information on EFI:
+
+http://developer.intel.com/technology/efi/
diff --git a/Documentation/ia64/err_inject.rst b/Documentation/ia64/err_inject.rst
new file mode 100644
index 000000000..900f71e93
--- /dev/null
+++ b/Documentation/ia64/err_inject.rst
@@ -0,0 +1,1067 @@
+========================================
+IPF Machine Check (MC) error inject tool
+========================================
+
+IPF Machine Check (MC) error inject tool is used to inject MC
+errors from Linux. The tool is a test bed for IPF MC work flow including
+hardware correctable error handling, OS recoverable error handling, MC
+event logging, etc.
+
+The tool includes two parts: a kernel driver and a user application
+sample. The driver provides interface to PAL to inject error
+and query error injection capabilities. The driver code is in
+arch/ia64/kernel/err_inject.c. The application sample (shown below)
+provides a combination of various errors and calls the driver's interface
+(sysfs interface) to inject errors or query error injection capabilities.
+
+The tool can be used to test Intel IPF machine MC handling capabilities.
+It's especially useful for people who can not access hardware MC injection
+tool to inject error. It's also very useful to integrate with other
+software test suits to do stressful testing on IPF.
+
+Below is a sample application as part of the whole tool. The sample
+can be used as a working test tool. Or it can be expanded to include
+more features. It also can be a integrated into a library or other user
+application to have more thorough test.
+
+The sample application takes err.conf as error configuration input. GCC
+compiles the code. After you install err_inject driver, you can run
+this sample application to inject errors.
+
+Errata: Itanium 2 Processors Specification Update lists some errata against
+the pal_mc_error_inject PAL procedure. The following err.conf has been tested
+on latest Montecito PAL.
+
+err.conf::
+
+ #This is configuration file for err_inject_tool.
+ #The format of the each line is:
+ #cpu, loop, interval, err_type_info, err_struct_info, err_data_buffer
+ #where
+ # cpu: logical cpu number the error will be inject in.
+ # loop: times the error will be injected.
+ # interval: In second. every so often one error is injected.
+ # err_type_info, err_struct_info: PAL parameters.
+ #
+ #Note: All values are hex w/o or w/ 0x prefix.
+
+
+ #On cpu2, inject only total 0x10 errors, interval 5 seconds
+ #corrected, data cache, hier-2, physical addr(assigned by tool code).
+ #working on Montecito latest PAL.
+ 2, 10, 5, 4101, 95
+
+ #On cpu4, inject and consume total 0x10 errors, interval 5 seconds
+ #corrected, data cache, hier-2, physical addr(assigned by tool code).
+ #working on Montecito latest PAL.
+ 4, 10, 5, 4109, 95
+
+ #On cpu15, inject and consume total 0x10 errors, interval 5 seconds
+ #recoverable, DTR0, hier-2.
+ #working on Montecito latest PAL.
+ 0xf, 0x10, 5, 4249, 15
+
+The sample application source code:
+
+err_injection_tool.c::
+
+ /*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright (C) 2006 Intel Co
+ * Fenghua Yu <fenghua.yu@intel.com>
+ *
+ */
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #include <fcntl.h>
+ #include <stdio.h>
+ #include <sched.h>
+ #include <unistd.h>
+ #include <stdlib.h>
+ #include <stdarg.h>
+ #include <string.h>
+ #include <errno.h>
+ #include <time.h>
+ #include <sys/ipc.h>
+ #include <sys/sem.h>
+ #include <sys/wait.h>
+ #include <sys/mman.h>
+ #include <sys/shm.h>
+
+ #define MAX_FN_SIZE 256
+ #define MAX_BUF_SIZE 256
+ #define DATA_BUF_SIZE 256
+ #define NR_CPUS 512
+ #define MAX_TASK_NUM 2048
+ #define MIN_INTERVAL 5 // seconds
+ #define ERR_DATA_BUFFER_SIZE 3 // Three 8-byte.
+ #define PARA_FIELD_NUM 5
+ #define MASK_SIZE (NR_CPUS/64)
+ #define PATH_FORMAT "/sys/devices/system/cpu/cpu%d/err_inject/"
+
+ int sched_setaffinity(pid_t pid, unsigned int len, unsigned long *mask);
+
+ int verbose;
+ #define vbprintf if (verbose) printf
+
+ int log_info(int cpu, const char *fmt, ...)
+ {
+ FILE *log;
+ char fn[MAX_FN_SIZE];
+ char buf[MAX_BUF_SIZE];
+ va_list args;
+
+ sprintf(fn, "%d.log", cpu);
+ log=fopen(fn, "a+");
+ if (log==NULL) {
+ perror("Error open:");
+ return -1;
+ }
+
+ va_start(args, fmt);
+ vprintf(fmt, args);
+ memset(buf, 0, MAX_BUF_SIZE);
+ vsprintf(buf, fmt, args);
+ va_end(args);
+
+ fwrite(buf, sizeof(buf), 1, log);
+ fclose(log);
+
+ return 0;
+ }
+
+ typedef unsigned long u64;
+ typedef unsigned int u32;
+
+ typedef union err_type_info_u {
+ struct {
+ u64 mode : 3, /* 0-2 */
+ err_inj : 3, /* 3-5 */
+ err_sev : 2, /* 6-7 */
+ err_struct : 5, /* 8-12 */
+ struct_hier : 3, /* 13-15 */
+ reserved : 48; /* 16-63 */
+ } err_type_info_u;
+ u64 err_type_info;
+ } err_type_info_t;
+
+ typedef union err_struct_info_u {
+ struct {
+ u64 siv : 1, /* 0 */
+ c_t : 2, /* 1-2 */
+ cl_p : 3, /* 3-5 */
+ cl_id : 3, /* 6-8 */
+ cl_dp : 1, /* 9 */
+ reserved1 : 22, /* 10-31 */
+ tiv : 1, /* 32 */
+ trigger : 4, /* 33-36 */
+ trigger_pl : 3, /* 37-39 */
+ reserved2 : 24; /* 40-63 */
+ } err_struct_info_cache;
+ struct {
+ u64 siv : 1, /* 0 */
+ tt : 2, /* 1-2 */
+ tc_tr : 2, /* 3-4 */
+ tr_slot : 8, /* 5-12 */
+ reserved1 : 19, /* 13-31 */
+ tiv : 1, /* 32 */
+ trigger : 4, /* 33-36 */
+ trigger_pl : 3, /* 37-39 */
+ reserved2 : 24; /* 40-63 */
+ } err_struct_info_tlb;
+ struct {
+ u64 siv : 1, /* 0 */
+ regfile_id : 4, /* 1-4 */
+ reg_num : 7, /* 5-11 */
+ reserved1 : 20, /* 12-31 */
+ tiv : 1, /* 32 */
+ trigger : 4, /* 33-36 */
+ trigger_pl : 3, /* 37-39 */
+ reserved2 : 24; /* 40-63 */
+ } err_struct_info_register;
+ struct {
+ u64 reserved;
+ } err_struct_info_bus_processor_interconnect;
+ u64 err_struct_info;
+ } err_struct_info_t;
+
+ typedef union err_data_buffer_u {
+ struct {
+ u64 trigger_addr; /* 0-63 */
+ u64 inj_addr; /* 64-127 */
+ u64 way : 5, /* 128-132 */
+ index : 20, /* 133-152 */
+ : 39; /* 153-191 */
+ } err_data_buffer_cache;
+ struct {
+ u64 trigger_addr; /* 0-63 */
+ u64 inj_addr; /* 64-127 */
+ u64 way : 5, /* 128-132 */
+ index : 20, /* 133-152 */
+ reserved : 39; /* 153-191 */
+ } err_data_buffer_tlb;
+ struct {
+ u64 trigger_addr; /* 0-63 */
+ } err_data_buffer_register;
+ struct {
+ u64 reserved; /* 0-63 */
+ } err_data_buffer_bus_processor_interconnect;
+ u64 err_data_buffer[ERR_DATA_BUFFER_SIZE];
+ } err_data_buffer_t;
+
+ typedef union capabilities_u {
+ struct {
+ u64 i : 1,
+ d : 1,
+ rv : 1,
+ tag : 1,
+ data : 1,
+ mesi : 1,
+ dp : 1,
+ reserved1 : 3,
+ pa : 1,
+ va : 1,
+ wi : 1,
+ reserved2 : 20,
+ trigger : 1,
+ trigger_pl : 1,
+ reserved3 : 30;
+ } capabilities_cache;
+ struct {
+ u64 d : 1,
+ i : 1,
+ rv : 1,
+ tc : 1,
+ tr : 1,
+ reserved1 : 27,
+ trigger : 1,
+ trigger_pl : 1,
+ reserved2 : 30;
+ } capabilities_tlb;
+ struct {
+ u64 gr_b0 : 1,
+ gr_b1 : 1,
+ fr : 1,
+ br : 1,
+ pr : 1,
+ ar : 1,
+ cr : 1,
+ rr : 1,
+ pkr : 1,
+ dbr : 1,
+ ibr : 1,
+ pmc : 1,
+ pmd : 1,
+ reserved1 : 3,
+ regnum : 1,
+ reserved2 : 15,
+ trigger : 1,
+ trigger_pl : 1,
+ reserved3 : 30;
+ } capabilities_register;
+ struct {
+ u64 reserved;
+ } capabilities_bus_processor_interconnect;
+ } capabilities_t;
+
+ typedef struct resources_s {
+ u64 ibr0 : 1,
+ ibr2 : 1,
+ ibr4 : 1,
+ ibr6 : 1,
+ dbr0 : 1,
+ dbr2 : 1,
+ dbr4 : 1,
+ dbr6 : 1,
+ reserved : 48;
+ } resources_t;
+
+
+ long get_page_size(void)
+ {
+ long page_size=sysconf(_SC_PAGESIZE);
+ return page_size;
+ }
+
+ #define PAGE_SIZE (get_page_size()==-1?0x4000:get_page_size())
+ #define SHM_SIZE (2*PAGE_SIZE*NR_CPUS)
+ #define SHM_VA 0x2000000100000000
+
+ int shmid;
+ void *shmaddr;
+
+ int create_shm(void)
+ {
+ key_t key;
+ char fn[MAX_FN_SIZE];
+
+ /* cpu0 is always existing */
+ sprintf(fn, PATH_FORMAT, 0);
+ if ((key = ftok(fn, 's')) == -1) {
+ perror("ftok");
+ return -1;
+ }
+
+ shmid = shmget(key, SHM_SIZE, 0644 | IPC_CREAT);
+ if (shmid == -1) {
+ if (errno==EEXIST) {
+ shmid = shmget(key, SHM_SIZE, 0);
+ if (shmid == -1) {
+ perror("shmget");
+ return -1;
+ }
+ }
+ else {
+ perror("shmget");
+ return -1;
+ }
+ }
+ vbprintf("shmid=%d", shmid);
+
+ /* connect to the segment: */
+ shmaddr = shmat(shmid, (void *)SHM_VA, 0);
+ if (shmaddr == (void*)-1) {
+ perror("shmat");
+ return -1;
+ }
+
+ memset(shmaddr, 0, SHM_SIZE);
+ mlock(shmaddr, SHM_SIZE);
+
+ return 0;
+ }
+
+ int free_shm()
+ {
+ munlock(shmaddr, SHM_SIZE);
+ shmdt(shmaddr);
+ semctl(shmid, 0, IPC_RMID);
+
+ return 0;
+ }
+
+ #ifdef _SEM_SEMUN_UNDEFINED
+ union semun
+ {
+ int val;
+ struct semid_ds *buf;
+ unsigned short int *array;
+ struct seminfo *__buf;
+ };
+ #endif
+
+ u32 mode=1; /* 1: physical mode; 2: virtual mode. */
+ int one_lock=1;
+ key_t key[NR_CPUS];
+ int semid[NR_CPUS];
+
+ int create_sem(int cpu)
+ {
+ union semun arg;
+ char fn[MAX_FN_SIZE];
+ int sid;
+
+ sprintf(fn, PATH_FORMAT, cpu);
+ sprintf(fn, "%s/%s", fn, "err_type_info");
+ if ((key[cpu] = ftok(fn, 'e')) == -1) {
+ perror("ftok");
+ return -1;
+ }
+
+ if (semid[cpu]!=0)
+ return 0;
+
+ /* clear old semaphore */
+ if ((sid = semget(key[cpu], 1, 0)) != -1)
+ semctl(sid, 0, IPC_RMID);
+
+ /* get one semaphore */
+ if ((semid[cpu] = semget(key[cpu], 1, IPC_CREAT | IPC_EXCL)) == -1) {
+ perror("semget");
+ printf("Please remove semaphore with key=0x%lx, then run the tool.\n",
+ (u64)key[cpu]);
+ return -1;
+ }
+
+ vbprintf("semid[%d]=0x%lx, key[%d]=%lx\n",cpu,(u64)semid[cpu],cpu,
+ (u64)key[cpu]);
+ /* initialize the semaphore to 1: */
+ arg.val = 1;
+ if (semctl(semid[cpu], 0, SETVAL, arg) == -1) {
+ perror("semctl");
+ return -1;
+ }
+
+ return 0;
+ }
+
+ static int lock(int cpu)
+ {
+ struct sembuf lock;
+
+ lock.sem_num = cpu;
+ lock.sem_op = 1;
+ semop(semid[cpu], &lock, 1);
+
+ return 0;
+ }
+
+ static int unlock(int cpu)
+ {
+ struct sembuf unlock;
+
+ unlock.sem_num = cpu;
+ unlock.sem_op = -1;
+ semop(semid[cpu], &unlock, 1);
+
+ return 0;
+ }
+
+ void free_sem(int cpu)
+ {
+ semctl(semid[cpu], 0, IPC_RMID);
+ }
+
+ int wr_multi(char *fn, unsigned long *data, int size)
+ {
+ int fd;
+ char buf[MAX_BUF_SIZE];
+ int ret;
+
+ if (size==1)
+ sprintf(buf, "%lx", *data);
+ else if (size==3)
+ sprintf(buf, "%lx,%lx,%lx", data[0], data[1], data[2]);
+ else {
+ fprintf(stderr,"write to file with wrong size!\n");
+ return -1;
+ }
+
+ fd=open(fn, O_RDWR);
+ if (!fd) {
+ perror("Error:");
+ return -1;
+ }
+ ret=write(fd, buf, sizeof(buf));
+ close(fd);
+ return ret;
+ }
+
+ int wr(char *fn, unsigned long data)
+ {
+ return wr_multi(fn, &data, 1);
+ }
+
+ int rd(char *fn, unsigned long *data)
+ {
+ int fd;
+ char buf[MAX_BUF_SIZE];
+
+ fd=open(fn, O_RDONLY);
+ if (fd<0) {
+ perror("Error:");
+ return -1;
+ }
+ read(fd, buf, MAX_BUF_SIZE);
+ *data=strtoul(buf, NULL, 16);
+ close(fd);
+ return 0;
+ }
+
+ int rd_status(char *path, int *status)
+ {
+ char fn[MAX_FN_SIZE];
+ sprintf(fn, "%s/status", path);
+ if (rd(fn, (u64*)status)<0) {
+ perror("status reading error.\n");
+ return -1;
+ }
+
+ return 0;
+ }
+
+ int rd_capabilities(char *path, u64 *capabilities)
+ {
+ char fn[MAX_FN_SIZE];
+ sprintf(fn, "%s/capabilities", path);
+ if (rd(fn, capabilities)<0) {
+ perror("capabilities reading error.\n");
+ return -1;
+ }
+
+ return 0;
+ }
+
+ int rd_all(char *path)
+ {
+ unsigned long err_type_info, err_struct_info, err_data_buffer;
+ int status;
+ unsigned long capabilities, resources;
+ char fn[MAX_FN_SIZE];
+
+ sprintf(fn, "%s/err_type_info", path);
+ if (rd(fn, &err_type_info)<0) {
+ perror("err_type_info reading error.\n");
+ return -1;
+ }
+ printf("err_type_info=%lx\n", err_type_info);
+
+ sprintf(fn, "%s/err_struct_info", path);
+ if (rd(fn, &err_struct_info)<0) {
+ perror("err_struct_info reading error.\n");
+ return -1;
+ }
+ printf("err_struct_info=%lx\n", err_struct_info);
+
+ sprintf(fn, "%s/err_data_buffer", path);
+ if (rd(fn, &err_data_buffer)<0) {
+ perror("err_data_buffer reading error.\n");
+ return -1;
+ }
+ printf("err_data_buffer=%lx\n", err_data_buffer);
+
+ sprintf(fn, "%s/status", path);
+ if (rd("status", (u64*)&status)<0) {
+ perror("status reading error.\n");
+ return -1;
+ }
+ printf("status=%d\n", status);
+
+ sprintf(fn, "%s/capabilities", path);
+ if (rd(fn,&capabilities)<0) {
+ perror("capabilities reading error.\n");
+ return -1;
+ }
+ printf("capabilities=%lx\n", capabilities);
+
+ sprintf(fn, "%s/resources", path);
+ if (rd(fn, &resources)<0) {
+ perror("resources reading error.\n");
+ return -1;
+ }
+ printf("resources=%lx\n", resources);
+
+ return 0;
+ }
+
+ int query_capabilities(char *path, err_type_info_t err_type_info,
+ u64 *capabilities)
+ {
+ char fn[MAX_FN_SIZE];
+ err_struct_info_t err_struct_info;
+ err_data_buffer_t err_data_buffer;
+
+ err_struct_info.err_struct_info=0;
+ memset(err_data_buffer.err_data_buffer, -1, ERR_DATA_BUFFER_SIZE*8);
+
+ sprintf(fn, "%s/err_type_info", path);
+ wr(fn, err_type_info.err_type_info);
+ sprintf(fn, "%s/err_struct_info", path);
+ wr(fn, 0x0);
+ sprintf(fn, "%s/err_data_buffer", path);
+ wr_multi(fn, err_data_buffer.err_data_buffer, ERR_DATA_BUFFER_SIZE);
+
+ // Fire pal_mc_error_inject procedure.
+ sprintf(fn, "%s/call_start", path);
+ wr(fn, mode);
+
+ if (rd_capabilities(path, capabilities)<0)
+ return -1;
+
+ return 0;
+ }
+
+ int query_all_capabilities()
+ {
+ int status;
+ err_type_info_t err_type_info;
+ int err_sev, err_struct, struct_hier;
+ int cap=0;
+ u64 capabilities;
+ char path[MAX_FN_SIZE];
+
+ err_type_info.err_type_info=0; // Initial
+ err_type_info.err_type_info_u.mode=0; // Query mode;
+ err_type_info.err_type_info_u.err_inj=0;
+
+ printf("All capabilities implemented in pal_mc_error_inject:\n");
+ sprintf(path, PATH_FORMAT ,0);
+ for (err_sev=0;err_sev<3;err_sev++)
+ for (err_struct=0;err_struct<5;err_struct++)
+ for (struct_hier=0;struct_hier<5;struct_hier++)
+ {
+ status=-1;
+ capabilities=0;
+ err_type_info.err_type_info_u.err_sev=err_sev;
+ err_type_info.err_type_info_u.err_struct=err_struct;
+ err_type_info.err_type_info_u.struct_hier=struct_hier;
+
+ if (query_capabilities(path, err_type_info, &capabilities)<0)
+ continue;
+
+ if (rd_status(path, &status)<0)
+ continue;
+
+ if (status==0) {
+ cap=1;
+ printf("For err_sev=%d, err_struct=%d, struct_hier=%d: ",
+ err_sev, err_struct, struct_hier);
+ printf("capabilities 0x%lx\n", capabilities);
+ }
+ }
+ if (!cap) {
+ printf("No capabilities supported.\n");
+ return 0;
+ }
+
+ return 0;
+ }
+
+ int err_inject(int cpu, char *path, err_type_info_t err_type_info,
+ err_struct_info_t err_struct_info,
+ err_data_buffer_t err_data_buffer)
+ {
+ int status;
+ char fn[MAX_FN_SIZE];
+
+ log_info(cpu, "err_type_info=%lx, err_struct_info=%lx, ",
+ err_type_info.err_type_info,
+ err_struct_info.err_struct_info);
+ log_info(cpu,"err_data_buffer=[%lx,%lx,%lx]\n",
+ err_data_buffer.err_data_buffer[0],
+ err_data_buffer.err_data_buffer[1],
+ err_data_buffer.err_data_buffer[2]);
+ sprintf(fn, "%s/err_type_info", path);
+ wr(fn, err_type_info.err_type_info);
+ sprintf(fn, "%s/err_struct_info", path);
+ wr(fn, err_struct_info.err_struct_info);
+ sprintf(fn, "%s/err_data_buffer", path);
+ wr_multi(fn, err_data_buffer.err_data_buffer, ERR_DATA_BUFFER_SIZE);
+
+ // Fire pal_mc_error_inject procedure.
+ sprintf(fn, "%s/call_start", path);
+ wr(fn,mode);
+
+ if (rd_status(path, &status)<0) {
+ vbprintf("fail: read status\n");
+ return -100;
+ }
+
+ if (status!=0) {
+ log_info(cpu, "fail: status=%d\n", status);
+ return status;
+ }
+
+ return status;
+ }
+
+ static int construct_data_buf(char *path, err_type_info_t err_type_info,
+ err_struct_info_t err_struct_info,
+ err_data_buffer_t *err_data_buffer,
+ void *va1)
+ {
+ char fn[MAX_FN_SIZE];
+ u64 virt_addr=0, phys_addr=0;
+
+ vbprintf("va1=%lx\n", (u64)va1);
+ memset(&err_data_buffer->err_data_buffer_cache, 0, ERR_DATA_BUFFER_SIZE*8);
+
+ switch (err_type_info.err_type_info_u.err_struct) {
+ case 1: // Cache
+ switch (err_struct_info.err_struct_info_cache.cl_id) {
+ case 1: //Virtual addr
+ err_data_buffer->err_data_buffer_cache.inj_addr=(u64)va1;
+ break;
+ case 2: //Phys addr
+ sprintf(fn, "%s/virtual_to_phys", path);
+ virt_addr=(u64)va1;
+ if (wr(fn,virt_addr)<0)
+ return -1;
+ rd(fn, &phys_addr);
+ err_data_buffer->err_data_buffer_cache.inj_addr=phys_addr;
+ break;
+ default:
+ printf("Not supported cl_id\n");
+ break;
+ }
+ break;
+ case 2: // TLB
+ break;
+ case 3: // Register file
+ break;
+ case 4: // Bus/system interconnect
+ default:
+ printf("Not supported err_struct\n");
+ break;
+ }
+
+ return 0;
+ }
+
+ typedef struct {
+ u64 cpu;
+ u64 loop;
+ u64 interval;
+ u64 err_type_info;
+ u64 err_struct_info;
+ u64 err_data_buffer[ERR_DATA_BUFFER_SIZE];
+ } parameters_t;
+
+ parameters_t line_para;
+ int para;
+
+ static int empty_data_buffer(u64 *err_data_buffer)
+ {
+ int empty=1;
+ int i;
+
+ for (i=0;i<ERR_DATA_BUFFER_SIZE; i++)
+ if (err_data_buffer[i]!=-1)
+ empty=0;
+
+ return empty;
+ }
+
+ int err_inj()
+ {
+ err_type_info_t err_type_info;
+ err_struct_info_t err_struct_info;
+ err_data_buffer_t err_data_buffer;
+ int count;
+ FILE *fp;
+ unsigned long cpu, loop, interval, err_type_info_conf, err_struct_info_conf;
+ u64 err_data_buffer_conf[ERR_DATA_BUFFER_SIZE];
+ int num;
+ int i;
+ char path[MAX_FN_SIZE];
+ parameters_t parameters[MAX_TASK_NUM]={};
+ pid_t child_pid[MAX_TASK_NUM];
+ time_t current_time;
+ int status;
+
+ if (!para) {
+ fp=fopen("err.conf", "r");
+ if (fp==NULL) {
+ perror("Error open err.conf");
+ return -1;
+ }
+
+ num=0;
+ while (!feof(fp)) {
+ char buf[256];
+ memset(buf,0,256);
+ fgets(buf, 256, fp);
+ count=sscanf(buf, "%lx, %lx, %lx, %lx, %lx, %lx, %lx, %lx\n",
+ &cpu, &loop, &interval,&err_type_info_conf,
+ &err_struct_info_conf,
+ &err_data_buffer_conf[0],
+ &err_data_buffer_conf[1],
+ &err_data_buffer_conf[2]);
+ if (count!=PARA_FIELD_NUM+3) {
+ err_data_buffer_conf[0]=-1;
+ err_data_buffer_conf[1]=-1;
+ err_data_buffer_conf[2]=-1;
+ count=sscanf(buf, "%lx, %lx, %lx, %lx, %lx\n",
+ &cpu, &loop, &interval,&err_type_info_conf,
+ &err_struct_info_conf);
+ if (count!=PARA_FIELD_NUM)
+ continue;
+ }
+
+ parameters[num].cpu=cpu;
+ parameters[num].loop=loop;
+ parameters[num].interval= interval>MIN_INTERVAL
+ ?interval:MIN_INTERVAL;
+ parameters[num].err_type_info=err_type_info_conf;
+ parameters[num].err_struct_info=err_struct_info_conf;
+ memcpy(parameters[num++].err_data_buffer,
+ err_data_buffer_conf,ERR_DATA_BUFFER_SIZE*8) ;
+
+ if (num>=MAX_TASK_NUM)
+ break;
+ }
+ }
+ else {
+ parameters[0].cpu=line_para.cpu;
+ parameters[0].loop=line_para.loop;
+ parameters[0].interval= line_para.interval>MIN_INTERVAL
+ ?line_para.interval:MIN_INTERVAL;
+ parameters[0].err_type_info=line_para.err_type_info;
+ parameters[0].err_struct_info=line_para.err_struct_info;
+ memcpy(parameters[0].err_data_buffer,
+ line_para.err_data_buffer,ERR_DATA_BUFFER_SIZE*8) ;
+
+ num=1;
+ }
+
+ /* Create semaphore: If one_lock, one semaphore for all processors.
+ Otherwise, one semaphore for each processor. */
+ if (one_lock) {
+ if (create_sem(0)) {
+ printf("Can not create semaphore...exit\n");
+ free_sem(0);
+ return -1;
+ }
+ }
+ else {
+ for (i=0;i<num;i++) {
+ if (create_sem(parameters[i].cpu)) {
+ printf("Can not create semaphore for cpu%d...exit\n",i);
+ free_sem(parameters[num].cpu);
+ return -1;
+ }
+ }
+ }
+
+ /* Create a shm segment which will be used to inject/consume errors on.*/
+ if (create_shm()==-1) {
+ printf("Error to create shm...exit\n");
+ return -1;
+ }
+
+ for (i=0;i<num;i++) {
+ pid_t pid;
+
+ current_time=time(NULL);
+ log_info(parameters[i].cpu, "\nBegine at %s", ctime(&current_time));
+ log_info(parameters[i].cpu, "Configurations:\n");
+ log_info(parameters[i].cpu,"On cpu%ld: loop=%lx, interval=%lx(s)",
+ parameters[i].cpu,
+ parameters[i].loop,
+ parameters[i].interval);
+ log_info(parameters[i].cpu," err_type_info=%lx,err_struct_info=%lx\n",
+ parameters[i].err_type_info,
+ parameters[i].err_struct_info);
+
+ sprintf(path, PATH_FORMAT, (int)parameters[i].cpu);
+ err_type_info.err_type_info=parameters[i].err_type_info;
+ err_struct_info.err_struct_info=parameters[i].err_struct_info;
+ memcpy(err_data_buffer.err_data_buffer,
+ parameters[i].err_data_buffer,
+ ERR_DATA_BUFFER_SIZE*8);
+
+ pid=fork();
+ if (pid==0) {
+ unsigned long mask[MASK_SIZE];
+ int j, k;
+
+ void *va1, *va2;
+
+ /* Allocate two memory areas va1 and va2 in shm */
+ va1=shmaddr+parameters[i].cpu*PAGE_SIZE;
+ va2=shmaddr+parameters[i].cpu*PAGE_SIZE+PAGE_SIZE;
+
+ vbprintf("va1=%lx, va2=%lx\n", (u64)va1, (u64)va2);
+ memset(va1, 0x1, PAGE_SIZE);
+ memset(va2, 0x2, PAGE_SIZE);
+
+ if (empty_data_buffer(err_data_buffer.err_data_buffer))
+ /* If not specified yet, construct data buffer
+ * with va1
+ */
+ construct_data_buf(path, err_type_info,
+ err_struct_info, &err_data_buffer,va1);
+
+ for (j=0;j<MASK_SIZE;j++)
+ mask[j]=0;
+
+ cpu=parameters[i].cpu;
+ k = cpu%64;
+ j = cpu/64;
+ mask[j] = 1UL << k;
+
+ if (sched_setaffinity(0, MASK_SIZE*8, mask)==-1) {
+ perror("Error sched_setaffinity:");
+ return -1;
+ }
+
+ for (j=0; j<parameters[i].loop; j++) {
+ log_info(parameters[i].cpu,"Injection ");
+ log_info(parameters[i].cpu,"on cpu%ld: #%d/%ld ",
+
+ parameters[i].cpu,j+1, parameters[i].loop);
+
+ /* Hold the lock */
+ if (one_lock)
+ lock(0);
+ else
+ /* Hold lock on this cpu */
+ lock(parameters[i].cpu);
+
+ if ((status=err_inject(parameters[i].cpu,
+ path, err_type_info,
+ err_struct_info, err_data_buffer))
+ ==0) {
+ /* consume the error for "inject only"*/
+ memcpy(va2, va1, PAGE_SIZE);
+ memcpy(va1, va2, PAGE_SIZE);
+ log_info(parameters[i].cpu,
+ "successful\n");
+ }
+ else {
+ log_info(parameters[i].cpu,"fail:");
+ log_info(parameters[i].cpu,
+ "status=%d\n", status);
+ unlock(parameters[i].cpu);
+ break;
+ }
+ if (one_lock)
+ /* Release the lock */
+ unlock(0);
+ /* Release lock on this cpu */
+ else
+ unlock(parameters[i].cpu);
+
+ if (j < parameters[i].loop-1)
+ sleep(parameters[i].interval);
+ }
+ current_time=time(NULL);
+ log_info(parameters[i].cpu, "Done at %s", ctime(&current_time));
+ return 0;
+ }
+ else if (pid<0) {
+ perror("Error fork:");
+ continue;
+ }
+ child_pid[i]=pid;
+ }
+ for (i=0;i<num;i++)
+ waitpid(child_pid[i], NULL, 0);
+
+ if (one_lock)
+ free_sem(0);
+ else
+ for (i=0;i<num;i++)
+ free_sem(parameters[i].cpu);
+
+ printf("All done.\n");
+
+ return 0;
+ }
+
+ void help()
+ {
+ printf("err_inject_tool:\n");
+ printf("\t-q: query all capabilities. default: off\n");
+ printf("\t-m: procedure mode. 1: physical 2: virtual. default: 1\n");
+ printf("\t-i: inject errors. default: off\n");
+ printf("\t-l: one lock per cpu. default: one lock for all\n");
+ printf("\t-e: error parameters:\n");
+ printf("\t\tcpu,loop,interval,err_type_info,err_struct_info[,err_data_buffer[0],err_data_buffer[1],err_data_buffer[2]]\n");
+ printf("\t\t cpu: logical cpu number the error will be inject in.\n");
+ printf("\t\t loop: times the error will be injected.\n");
+ printf("\t\t interval: In second. every so often one error is injected.\n");
+ printf("\t\t err_type_info, err_struct_info: PAL parameters.\n");
+ printf("\t\t err_data_buffer: PAL parameter. Optional. If not present,\n");
+ printf("\t\t it's constructed by tool automatically. Be\n");
+ printf("\t\t careful to provide err_data_buffer and make\n");
+ printf("\t\t sure it's working with the environment.\n");
+ printf("\t Note:no space between error parameters.\n");
+ printf("\t default: Take error parameters from err.conf instead of command line.\n");
+ printf("\t-v: verbose. default: off\n");
+ printf("\t-h: help\n\n");
+ printf("The tool will take err.conf file as ");
+ printf("input to inject single or multiple errors ");
+ printf("on one or multiple cpus in parallel.\n");
+ }
+
+ int main(int argc, char **argv)
+ {
+ char c;
+ int do_err_inj=0;
+ int do_query_all=0;
+ int count;
+ u32 m;
+
+ /* Default one lock for all cpu's */
+ one_lock=1;
+ while ((c = getopt(argc, argv, "m:iqvhle:")) != EOF)
+ switch (c) {
+ case 'm': /* Procedure mode. 1: phys 2: virt */
+ count=sscanf(optarg, "%x", &m);
+ if (count!=1 || (m!=1 && m!=2)) {
+ printf("Wrong mode number.\n");
+ help();
+ return -1;
+ }
+ mode=m;
+ break;
+ case 'i': /* Inject errors */
+ do_err_inj=1;
+ break;
+ case 'q': /* Query */
+ do_query_all=1;
+ break;
+ case 'v': /* Verbose */
+ verbose=1;
+ break;
+ case 'l': /* One lock per cpu */
+ one_lock=0;
+ break;
+ case 'e': /* error arguments */
+ /* Take parameters:
+ * #cpu, loop, interval, err_type_info, err_struct_info[, err_data_buffer]
+ * err_data_buffer is optional. Recommend not to specify
+ * err_data_buffer. Better to use tool to generate it.
+ */
+ count=sscanf(optarg,
+ "%lx, %lx, %lx, %lx, %lx, %lx, %lx, %lx\n",
+ &line_para.cpu,
+ &line_para.loop,
+ &line_para.interval,
+ &line_para.err_type_info,
+ &line_para.err_struct_info,
+ &line_para.err_data_buffer[0],
+ &line_para.err_data_buffer[1],
+ &line_para.err_data_buffer[2]);
+ if (count!=PARA_FIELD_NUM+3) {
+ line_para.err_data_buffer[0]=-1,
+ line_para.err_data_buffer[1]=-1,
+ line_para.err_data_buffer[2]=-1;
+ count=sscanf(optarg, "%lx, %lx, %lx, %lx, %lx\n",
+ &line_para.cpu,
+ &line_para.loop,
+ &line_para.interval,
+ &line_para.err_type_info,
+ &line_para.err_struct_info);
+ if (count!=PARA_FIELD_NUM) {
+ printf("Wrong error arguments.\n");
+ help();
+ return -1;
+ }
+ }
+ para=1;
+ break;
+ continue;
+ break;
+ case 'h':
+ help();
+ return 0;
+ default:
+ break;
+ }
+
+ if (do_query_all)
+ query_all_capabilities();
+ if (do_err_inj)
+ err_inj();
+
+ if (!do_query_all && !do_err_inj)
+ help();
+
+ return 0;
+ }
diff --git a/Documentation/ia64/fsys.rst b/Documentation/ia64/fsys.rst
new file mode 100644
index 000000000..a702d2cc9
--- /dev/null
+++ b/Documentation/ia64/fsys.rst
@@ -0,0 +1,303 @@
+===================================
+Light-weight System Calls for IA-64
+===================================
+
+ Started: 13-Jan-2003
+
+ Last update: 27-Sep-2003
+
+ David Mosberger-Tang
+ <davidm@hpl.hp.com>
+
+Using the "epc" instruction effectively introduces a new mode of
+execution to the ia64 linux kernel. We call this mode the
+"fsys-mode". To recap, the normal states of execution are:
+
+ - kernel mode:
+ Both the register stack and the memory stack have been
+ switched over to kernel memory. The user-level state is saved
+ in a pt-regs structure at the top of the kernel memory stack.
+
+ - user mode:
+ Both the register stack and the kernel stack are in
+ user memory. The user-level state is contained in the
+ CPU registers.
+
+ - bank 0 interruption-handling mode:
+ This is the non-interruptible state which all
+ interruption-handlers start execution in. The user-level
+ state remains in the CPU registers and some kernel state may
+ be stored in bank 0 of registers r16-r31.
+
+In contrast, fsys-mode has the following special properties:
+
+ - execution is at privilege level 0 (most-privileged)
+
+ - CPU registers may contain a mixture of user-level and kernel-level
+ state (it is the responsibility of the kernel to ensure that no
+ security-sensitive kernel-level state is leaked back to
+ user-level)
+
+ - execution is interruptible and preemptible (an fsys-mode handler
+ can disable interrupts and avoid all other interruption-sources
+ to avoid preemption)
+
+ - neither the memory-stack nor the register-stack can be trusted while
+ in fsys-mode (they point to the user-level stacks, which may
+ be invalid, or completely bogus addresses)
+
+In summary, fsys-mode is much more similar to running in user-mode
+than it is to running in kernel-mode. Of course, given that the
+privilege level is at level 0, this means that fsys-mode requires some
+care (see below).
+
+
+How to tell fsys-mode
+=====================
+
+Linux operates in fsys-mode when (a) the privilege level is 0 (most
+privileged) and (b) the stacks have NOT been switched to kernel memory
+yet. For convenience, the header file <asm-ia64/ptrace.h> provides
+three macros::
+
+ user_mode(regs)
+ user_stack(task,regs)
+ fsys_mode(task,regs)
+
+The "regs" argument is a pointer to a pt_regs structure. The "task"
+argument is a pointer to the task structure to which the "regs"
+pointer belongs to. user_mode() returns TRUE if the CPU state pointed
+to by "regs" was executing in user mode (privilege level 3).
+user_stack() returns TRUE if the state pointed to by "regs" was
+executing on the user-level stack(s). Finally, fsys_mode() returns
+TRUE if the CPU state pointed to by "regs" was executing in fsys-mode.
+The fsys_mode() macro is equivalent to the expression::
+
+ !user_mode(regs) && user_stack(task,regs)
+
+How to write an fsyscall handler
+================================
+
+The file arch/ia64/kernel/fsys.S contains a table of fsyscall-handlers
+(fsyscall_table). This table contains one entry for each system call.
+By default, a system call is handled by fsys_fallback_syscall(). This
+routine takes care of entering (full) kernel mode and calling the
+normal Linux system call handler. For performance-critical system
+calls, it is possible to write a hand-tuned fsyscall_handler. For
+example, fsys.S contains fsys_getpid(), which is a hand-tuned version
+of the getpid() system call.
+
+The entry and exit-state of an fsyscall handler is as follows:
+
+Machine state on entry to fsyscall handler
+------------------------------------------
+
+ ========= ===============================================================
+ r10 0
+ r11 saved ar.pfs (a user-level value)
+ r15 system call number
+ r16 "current" task pointer (in normal kernel-mode, this is in r13)
+ r32-r39 system call arguments
+ b6 return address (a user-level value)
+ ar.pfs previous frame-state (a user-level value)
+ PSR.be cleared to zero (i.e., little-endian byte order is in effect)
+ - all other registers may contain values passed in from user-mode
+ ========= ===============================================================
+
+Required machine state on exit to fsyscall handler
+--------------------------------------------------
+
+ ========= ===========================================================
+ r11 saved ar.pfs (as passed into the fsyscall handler)
+ r15 system call number (as passed into the fsyscall handler)
+ r32-r39 system call arguments (as passed into the fsyscall handler)
+ b6 return address (as passed into the fsyscall handler)
+ ar.pfs previous frame-state (as passed into the fsyscall handler)
+ ========= ===========================================================
+
+Fsyscall handlers can execute with very little overhead, but with that
+speed comes a set of restrictions:
+
+ * Fsyscall-handlers MUST check for any pending work in the flags
+ member of the thread-info structure and if any of the
+ TIF_ALLWORK_MASK flags are set, the handler needs to fall back on
+ doing a full system call (by calling fsys_fallback_syscall).
+
+ * Fsyscall-handlers MUST preserve incoming arguments (r32-r39, r11,
+ r15, b6, and ar.pfs) because they will be needed in case of a
+ system call restart. Of course, all "preserved" registers also
+ must be preserved, in accordance to the normal calling conventions.
+
+ * Fsyscall-handlers MUST check argument registers for containing a
+ NaT value before using them in any way that could trigger a
+ NaT-consumption fault. If a system call argument is found to
+ contain a NaT value, an fsyscall-handler may return immediately
+ with r8=EINVAL, r10=-1.
+
+ * Fsyscall-handlers MUST NOT use the "alloc" instruction or perform
+ any other operation that would trigger mandatory RSE
+ (register-stack engine) traffic.
+
+ * Fsyscall-handlers MUST NOT write to any stacked registers because
+ it is not safe to assume that user-level called a handler with the
+ proper number of arguments.
+
+ * Fsyscall-handlers need to be careful when accessing per-CPU variables:
+ unless proper safe-guards are taken (e.g., interruptions are avoided),
+ execution may be pre-empted and resumed on another CPU at any given
+ time.
+
+ * Fsyscall-handlers must be careful not to leak sensitive kernel'
+ information back to user-level. In particular, before returning to
+ user-level, care needs to be taken to clear any scratch registers
+ that could contain sensitive information (note that the current
+ task pointer is not considered sensitive: it's already exposed
+ through ar.k6).
+
+ * Fsyscall-handlers MUST NOT access user-memory without first
+ validating access-permission (this can be done typically via
+ probe.r.fault and/or probe.w.fault) and without guarding against
+ memory access exceptions (this can be done with the EX() macros
+ defined by asmmacro.h).
+
+The above restrictions may seem draconian, but remember that it's
+possible to trade off some of the restrictions by paying a slightly
+higher overhead. For example, if an fsyscall-handler could benefit
+from the shadow register bank, it could temporarily disable PSR.i and
+PSR.ic, switch to bank 0 (bsw.0) and then use the shadow registers as
+needed. In other words, following the above rules yields extremely
+fast system call execution (while fully preserving system call
+semantics), but there is also a lot of flexibility in handling more
+complicated cases.
+
+Signal handling
+===============
+
+The delivery of (asynchronous) signals must be delayed until fsys-mode
+is exited. This is accomplished with the help of the lower-privilege
+transfer trap: arch/ia64/kernel/process.c:do_notify_resume_user()
+checks whether the interrupted task was in fsys-mode and, if so, sets
+PSR.lp and returns immediately. When fsys-mode is exited via the
+"br.ret" instruction that lowers the privilege level, a trap will
+occur. The trap handler clears PSR.lp again and returns immediately.
+The kernel exit path then checks for and delivers any pending signals.
+
+PSR Handling
+============
+
+The "epc" instruction doesn't change the contents of PSR at all. This
+is in contrast to a regular interruption, which clears almost all
+bits. Because of that, some care needs to be taken to ensure things
+work as expected. The following discussion describes how each PSR bit
+is handled.
+
+======= =======================================================================
+PSR.be Cleared when entering fsys-mode. A srlz.d instruction is used
+ to ensure the CPU is in little-endian mode before the first
+ load/store instruction is executed. PSR.be is normally NOT
+ restored upon return from an fsys-mode handler. In other
+ words, user-level code must not rely on PSR.be being preserved
+ across a system call.
+PSR.up Unchanged.
+PSR.ac Unchanged.
+PSR.mfl Unchanged. Note: fsys-mode handlers must not write-registers!
+PSR.mfh Unchanged. Note: fsys-mode handlers must not write-registers!
+PSR.ic Unchanged. Note: fsys-mode handlers can clear the bit, if needed.
+PSR.i Unchanged. Note: fsys-mode handlers can clear the bit, if needed.
+PSR.pk Unchanged.
+PSR.dt Unchanged.
+PSR.dfl Unchanged. Note: fsys-mode handlers must not write-registers!
+PSR.dfh Unchanged. Note: fsys-mode handlers must not write-registers!
+PSR.sp Unchanged.
+PSR.pp Unchanged.
+PSR.di Unchanged.
+PSR.si Unchanged.
+PSR.db Unchanged. The kernel prevents user-level from setting a hardware
+ breakpoint that triggers at any privilege level other than
+ 3 (user-mode).
+PSR.lp Unchanged.
+PSR.tb Lazy redirect. If a taken-branch trap occurs while in
+ fsys-mode, the trap-handler modifies the saved machine state
+ such that execution resumes in the gate page at
+ syscall_via_break(), with privilege level 3. Note: the
+ taken branch would occur on the branch invoking the
+ fsyscall-handler, at which point, by definition, a syscall
+ restart is still safe. If the system call number is invalid,
+ the fsys-mode handler will return directly to user-level. This
+ return will trigger a taken-branch trap, but since the trap is
+ taken _after_ restoring the privilege level, the CPU has already
+ left fsys-mode, so no special treatment is needed.
+PSR.rt Unchanged.
+PSR.cpl Cleared to 0.
+PSR.is Unchanged (guaranteed to be 0 on entry to the gate page).
+PSR.mc Unchanged.
+PSR.it Unchanged (guaranteed to be 1).
+PSR.id Unchanged. Note: the ia64 linux kernel never sets this bit.
+PSR.da Unchanged. Note: the ia64 linux kernel never sets this bit.
+PSR.dd Unchanged. Note: the ia64 linux kernel never sets this bit.
+PSR.ss Lazy redirect. If set, "epc" will cause a Single Step Trap to
+ be taken. The trap handler then modifies the saved machine
+ state such that execution resumes in the gate page at
+ syscall_via_break(), with privilege level 3.
+PSR.ri Unchanged.
+PSR.ed Unchanged. Note: This bit could only have an effect if an fsys-mode
+ handler performed a speculative load that gets NaTted. If so, this
+ would be the normal & expected behavior, so no special treatment is
+ needed.
+PSR.bn Unchanged. Note: fsys-mode handlers may clear the bit, if needed.
+ Doing so requires clearing PSR.i and PSR.ic as well.
+PSR.ia Unchanged. Note: the ia64 linux kernel never sets this bit.
+======= =======================================================================
+
+Using fast system calls
+=======================
+
+To use fast system calls, userspace applications need simply call
+__kernel_syscall_via_epc(). For example
+
+-- example fgettimeofday() call --
+
+-- fgettimeofday.S --
+
+::
+
+ #include <asm/asmmacro.h>
+
+ GLOBAL_ENTRY(fgettimeofday)
+ .prologue
+ .save ar.pfs, r11
+ mov r11 = ar.pfs
+ .body
+
+ mov r2 = 0xa000000000020660;; // gate address
+ // found by inspection of System.map for the
+ // __kernel_syscall_via_epc() function. See
+ // below for how to do this for real.
+
+ mov b7 = r2
+ mov r15 = 1087 // gettimeofday syscall
+ ;;
+ br.call.sptk.many b6 = b7
+ ;;
+
+ .restore sp
+
+ mov ar.pfs = r11
+ br.ret.sptk.many rp;; // return to caller
+ END(fgettimeofday)
+
+-- end fgettimeofday.S --
+
+In reality, getting the gate address is accomplished by two extra
+values passed via the ELF auxiliary vector (include/asm-ia64/elf.h)
+
+ * AT_SYSINFO : is the address of __kernel_syscall_via_epc()
+ * AT_SYSINFO_EHDR : is the address of the kernel gate ELF DSO
+
+The ELF DSO is a pre-linked library that is mapped in by the kernel at
+the gate page. It is a proper ELF shared object so, with a dynamic
+loader that recognises the library, you should be able to make calls to
+the exported functions within it as with any other shared library.
+AT_SYSINFO points into the kernel DSO at the
+__kernel_syscall_via_epc() function for historical reasons (it was
+used before the kernel DSO) and as a convenience.
diff --git a/Documentation/ia64/ia64.rst b/Documentation/ia64/ia64.rst
new file mode 100644
index 000000000..b725019a9
--- /dev/null
+++ b/Documentation/ia64/ia64.rst
@@ -0,0 +1,49 @@
+===========================================
+Linux kernel release for the IA-64 Platform
+===========================================
+
+ These are the release notes for Linux since version 2.4 for IA-64
+ platform. This document provides information specific to IA-64
+ ONLY, to get additional information about the Linux kernel also
+ read the original Linux README provided with the kernel.
+
+Installing the Kernel
+=====================
+
+ - IA-64 kernel installation is the same as the other platforms, see
+ original README for details.
+
+
+Software Requirements
+=====================
+
+ Compiling and running this kernel requires an IA-64 compliant GCC
+ compiler. And various software packages also compiled with an
+ IA-64 compliant GCC compiler.
+
+
+Configuring the Kernel
+======================
+
+ Configuration is the same, see original README for details.
+
+
+Compiling the Kernel:
+
+ - Compiling this kernel doesn't differ from other platform so read
+ the original README for details BUT make sure you have an IA-64
+ compliant GCC compiler.
+
+IA-64 Specifics
+===============
+
+ - General issues:
+
+ * Hardly any performance tuning has been done. Obvious targets
+ include the library routines (IP checksum, etc.). Less
+ obvious targets include making sure we don't flush the TLB
+ needlessly, etc.
+
+ * SMP locks cleanup/optimization
+
+ * IA32 support. Currently experimental. It mostly works.
diff --git a/Documentation/ia64/index.rst b/Documentation/ia64/index.rst
new file mode 100644
index 000000000..4bdfe2806
--- /dev/null
+++ b/Documentation/ia64/index.rst
@@ -0,0 +1,17 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+IA-64 Architecture
+==================
+
+.. toctree::
+ :maxdepth: 1
+
+ ia64
+ aliasing
+ efirtc
+ err_inject
+ fsys
+ irq-redir
+ mca
+ serial
diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/ia64/irq-redir.rst
new file mode 100644
index 000000000..6bbbbe4f7
--- /dev/null
+++ b/Documentation/ia64/irq-redir.rst
@@ -0,0 +1,80 @@
+==============================
+IRQ affinity on IA64 platforms
+==============================
+
+07.01.2002, Erich Focht <efocht@ess.nec.de>
+
+
+By writing to /proc/irq/IRQ#/smp_affinity the interrupt routing can be
+controlled. The behavior on IA64 platforms is slightly different from
+that described in Documentation/core-api/irq/irq-affinity.rst for i386 systems.
+
+Because of the usage of SAPIC mode and physical destination mode the
+IRQ target is one particular CPU and cannot be a mask of several
+CPUs. Only the first non-zero bit is taken into account.
+
+
+Usage examples
+==============
+
+The target CPU has to be specified as a hexadecimal CPU mask. The
+first non-zero bit is the selected CPU. This format has been kept for
+compatibility reasons with i386.
+
+Set the delivery mode of interrupt 41 to fixed and route the
+interrupts to CPU #3 (logical CPU number) (2^3=0x08)::
+
+ echo "8" >/proc/irq/41/smp_affinity
+
+Set the default route for IRQ number 41 to CPU 6 in lowest priority
+delivery mode (redirectable)::
+
+ echo "r 40" >/proc/irq/41/smp_affinity
+
+The output of the command::
+
+ cat /proc/irq/IRQ#/smp_affinity
+
+gives the target CPU mask for the specified interrupt vector. If the CPU
+mask is preceded by the character "r", the interrupt is redirectable
+(i.e. lowest priority mode routing is used), otherwise its route is
+fixed.
+
+
+
+Initialization and default behavior
+===================================
+
+If the platform features IRQ redirection (info provided by SAL) all
+IO-SAPIC interrupts are initialized with CPU#0 as their default target
+and the routing is the so called "lowest priority mode" (actually
+fixed SAPIC mode with hint). The XTP chipset registers are used as hints
+for the IRQ routing. Currently in Linux XTP registers can have three
+values:
+
+ - minimal for an idle task,
+ - normal if any other task runs,
+ - maximal if the CPU is going to be switched off.
+
+The IRQ is routed to the CPU with lowest XTP register value, the
+search begins at the default CPU. Therefore most of the interrupts
+will be handled by CPU #0.
+
+If the platform doesn't feature interrupt redirection IOSAPIC fixed
+routing is used. The target CPUs are distributed in a round robin
+manner. IRQs will be routed only to the selected target CPUs. Check
+with::
+
+ cat /proc/interrupts
+
+
+
+Comments
+========
+
+On large (multi-node) systems it is recommended to route the IRQs to
+the node to which the corresponding device is connected.
+For systems like the NEC AzusA we get IRQ node-affinity for free. This
+is because usually the chipsets on each node redirect the interrupts
+only to their own CPUs (as they cannot see the XTP registers on the
+other nodes).
diff --git a/Documentation/ia64/mca.rst b/Documentation/ia64/mca.rst
new file mode 100644
index 000000000..08270bba4
--- /dev/null
+++ b/Documentation/ia64/mca.rst
@@ -0,0 +1,198 @@
+=============================================================
+An ad-hoc collection of notes on IA64 MCA and INIT processing
+=============================================================
+
+Feel free to update it with notes about any area that is not clear.
+
+---
+
+MCA/INIT are completely asynchronous. They can occur at any time, when
+the OS is in any state. Including when one of the cpus is already
+holding a spinlock. Trying to get any lock from MCA/INIT state is
+asking for deadlock. Also the state of structures that are protected
+by locks is indeterminate, including linked lists.
+
+---
+
+The complicated ia64 MCA process. All of this is mandated by Intel's
+specification for ia64 SAL, error recovery and unwind, it is not as
+if we have a choice here.
+
+* MCA occurs on one cpu, usually due to a double bit memory error.
+ This is the monarch cpu.
+
+* SAL sends an MCA rendezvous interrupt (which is a normal interrupt)
+ to all the other cpus, the slaves.
+
+* Slave cpus that receive the MCA interrupt call down into SAL, they
+ end up spinning disabled while the MCA is being serviced.
+
+* If any slave cpu was already spinning disabled when the MCA occurred
+ then it cannot service the MCA interrupt. SAL waits ~20 seconds then
+ sends an unmaskable INIT event to the slave cpus that have not
+ already rendezvoused.
+
+* Because MCA/INIT can be delivered at any time, including when the cpu
+ is down in PAL in physical mode, the registers at the time of the
+ event are _completely_ undefined. In particular the MCA/INIT
+ handlers cannot rely on the thread pointer, PAL physical mode can
+ (and does) modify TP. It is allowed to do that as long as it resets
+ TP on return. However MCA/INIT events expose us to these PAL
+ internal TP changes. Hence curr_task().
+
+* If an MCA/INIT event occurs while the kernel was running (not user
+ space) and the kernel has called PAL then the MCA/INIT handler cannot
+ assume that the kernel stack is in a fit state to be used. Mainly
+ because PAL may or may not maintain the stack pointer internally.
+ Because the MCA/INIT handlers cannot trust the kernel stack, they
+ have to use their own, per-cpu stacks. The MCA/INIT stacks are
+ preformatted with just enough task state to let the relevant handlers
+ do their job.
+
+* Unlike most other architectures, the ia64 struct task is embedded in
+ the kernel stack[1]. So switching to a new kernel stack means that
+ we switch to a new task as well. Because various bits of the kernel
+ assume that current points into the struct task, switching to a new
+ stack also means a new value for current.
+
+* Once all slaves have rendezvoused and are spinning disabled, the
+ monarch is entered. The monarch now tries to diagnose the problem
+ and decide if it can recover or not.
+
+* Part of the monarch's job is to look at the state of all the other
+ tasks. The only way to do that on ia64 is to call the unwinder,
+ as mandated by Intel.
+
+* The starting point for the unwind depends on whether a task is
+ running or not. That is, whether it is on a cpu or is blocked. The
+ monarch has to determine whether or not a task is on a cpu before it
+ knows how to start unwinding it. The tasks that received an MCA or
+ INIT event are no longer running, they have been converted to blocked
+ tasks. But (and its a big but), the cpus that received the MCA
+ rendezvous interrupt are still running on their normal kernel stacks!
+
+* To distinguish between these two cases, the monarch must know which
+ tasks are on a cpu and which are not. Hence each slave cpu that
+ switches to an MCA/INIT stack, registers its new stack using
+ set_curr_task(), so the monarch can tell that the _original_ task is
+ no longer running on that cpu. That gives us a decent chance of
+ getting a valid backtrace of the _original_ task.
+
+* MCA/INIT can be nested, to a depth of 2 on any cpu. In the case of a
+ nested error, we want diagnostics on the MCA/INIT handler that
+ failed, not on the task that was originally running. Again this
+ requires set_curr_task() so the MCA/INIT handlers can register their
+ own stack as running on that cpu. Then a recursive error gets a
+ trace of the failing handler's "task".
+
+[1]
+ My (Keith Owens) original design called for ia64 to separate its
+ struct task and the kernel stacks. Then the MCA/INIT data would be
+ chained stacks like i386 interrupt stacks. But that required
+ radical surgery on the rest of ia64, plus extra hard wired TLB
+ entries with its associated performance degradation. David
+ Mosberger vetoed that approach. Which meant that separate kernel
+ stacks meant separate "tasks" for the MCA/INIT handlers.
+
+---
+
+INIT is less complicated than MCA. Pressing the nmi button or using
+the equivalent command on the management console sends INIT to all
+cpus. SAL picks one of the cpus as the monarch and the rest are
+slaves. All the OS INIT handlers are entered at approximately the same
+time. The OS monarch prints the state of all tasks and returns, after
+which the slaves return and the system resumes.
+
+At least that is what is supposed to happen. Alas there are broken
+versions of SAL out there. Some drive all the cpus as monarchs. Some
+drive them all as slaves. Some drive one cpu as monarch, wait for that
+cpu to return from the OS then drive the rest as slaves. Some versions
+of SAL cannot even cope with returning from the OS, they spin inside
+SAL on resume. The OS INIT code has workarounds for some of these
+broken SAL symptoms, but some simply cannot be fixed from the OS side.
+
+---
+
+The scheduler hooks used by ia64 (curr_task, set_curr_task) are layer
+violations. Unfortunately MCA/INIT start off as massive layer
+violations (can occur at _any_ time) and they build from there.
+
+At least ia64 makes an attempt at recovering from hardware errors, but
+it is a difficult problem because of the asynchronous nature of these
+errors. When processing an unmaskable interrupt we sometimes need
+special code to cope with our inability to take any locks.
+
+---
+
+How is ia64 MCA/INIT different from x86 NMI?
+
+* x86 NMI typically gets delivered to one cpu. MCA/INIT gets sent to
+ all cpus.
+
+* x86 NMI cannot be nested. MCA/INIT can be nested, to a depth of 2
+ per cpu.
+
+* x86 has a separate struct task which points to one of multiple kernel
+ stacks. ia64 has the struct task embedded in the single kernel
+ stack, so switching stack means switching task.
+
+* x86 does not call the BIOS so the NMI handler does not have to worry
+ about any registers having changed. MCA/INIT can occur while the cpu
+ is in PAL in physical mode, with undefined registers and an undefined
+ kernel stack.
+
+* i386 backtrace is not very sensitive to whether a process is running
+ or not. ia64 unwind is very, very sensitive to whether a process is
+ running or not.
+
+---
+
+What happens when MCA/INIT is delivered what a cpu is running user
+space code?
+
+The user mode registers are stored in the RSE area of the MCA/INIT on
+entry to the OS and are restored from there on return to SAL, so user
+mode registers are preserved across a recoverable MCA/INIT. Since the
+OS has no idea what unwind data is available for the user space stack,
+MCA/INIT never tries to backtrace user space. Which means that the OS
+does not bother making the user space process look like a blocked task,
+i.e. the OS does not copy pt_regs and switch_stack to the user space
+stack. Also the OS has no idea how big the user space RSE and memory
+stacks are, which makes it too risky to copy the saved state to a user
+mode stack.
+
+---
+
+How do we get a backtrace on the tasks that were running when MCA/INIT
+was delivered?
+
+mca.c:::ia64_mca_modify_original_stack(). That identifies and
+verifies the original kernel stack, copies the dirty registers from
+the MCA/INIT stack's RSE to the original stack's RSE, copies the
+skeleton struct pt_regs and switch_stack to the original stack, fills
+in the skeleton structures from the PAL minstate area and updates the
+original stack's thread.ksp. That makes the original stack look
+exactly like any other blocked task, i.e. it now appears to be
+sleeping. To get a backtrace, just start with thread.ksp for the
+original task and unwind like any other sleeping task.
+
+---
+
+How do we identify the tasks that were running when MCA/INIT was
+delivered?
+
+If the previous task has been verified and converted to a blocked
+state, then sos->prev_task on the MCA/INIT stack is updated to point to
+the previous task. You can look at that field in dumps or debuggers.
+To help distinguish between the handler and the original tasks,
+handlers have _TIF_MCA_INIT set in thread_info.flags.
+
+The sos data is always in the MCA/INIT handler stack, at offset
+MCA_SOS_OFFSET. You can get that value from mca_asm.h or calculate it
+as KERNEL_STACK_SIZE - sizeof(struct pt_regs) - sizeof(struct
+ia64_sal_os_state), with 16 byte alignment for all structures.
+
+Also the comm field of the MCA/INIT task is modified to include the pid
+of the original task, for humans to use. For example, a comm field of
+'MCA 12159' means that pid 12159 was running when the MCA was
+delivered.
diff --git a/Documentation/ia64/serial.rst b/Documentation/ia64/serial.rst
new file mode 100644
index 000000000..1de70c305
--- /dev/null
+++ b/Documentation/ia64/serial.rst
@@ -0,0 +1,165 @@
+==============
+Serial Devices
+==============
+
+Serial Device Naming
+====================
+
+ As of 2.6.10, serial devices on ia64 are named based on the
+ order of ACPI and PCI enumeration. The first device in the
+ ACPI namespace (if any) becomes /dev/ttyS0, the second becomes
+ /dev/ttyS1, etc., and PCI devices are named sequentially
+ starting after the ACPI devices.
+
+ Prior to 2.6.10, there were confusing exceptions to this:
+
+ - Firmware on some machines (mostly from HP) provides an HCDP
+ table[1] that tells the kernel about devices that can be used
+ as a serial console. If the user specified "console=ttyS0"
+ or the EFI ConOut path contained only UART devices, the
+ kernel registered the device described by the HCDP as
+ /dev/ttyS0.
+
+ - If there was no HCDP, we assumed there were UARTs at the
+ legacy COM port addresses (I/O ports 0x3f8 and 0x2f8), so
+ the kernel registered those as /dev/ttyS0 and /dev/ttyS1.
+
+ Any additional ACPI or PCI devices were registered sequentially
+ after /dev/ttyS0 as they were discovered.
+
+ With an HCDP, device names changed depending on EFI configuration
+ and "console=" arguments. Without an HCDP, device names didn't
+ change, but we registered devices that might not really exist.
+
+ For example, an HP rx1600 with a single built-in serial port
+ (described in the ACPI namespace) plus an MP[2] (a PCI device) has
+ these ports:
+
+ ========== ========== ============ ============ =======
+ Type MMIO pre-2.6.10 pre-2.6.10 2.6.10+
+ address
+ (EFI console (EFI console
+ on builtin) on MP port)
+ ========== ========== ============ ============ =======
+ builtin 0xff5e0000 ttyS0 ttyS1 ttyS0
+ MP UPS 0xf8031000 ttyS1 ttyS2 ttyS1
+ MP Console 0xf8030000 ttyS2 ttyS0 ttyS2
+ MP 2 0xf8030010 ttyS3 ttyS3 ttyS3
+ MP 3 0xf8030038 ttyS4 ttyS4 ttyS4
+ ========== ========== ============ ============ =======
+
+Console Selection
+=================
+
+ EFI knows what your console devices are, but it doesn't tell the
+ kernel quite enough to actually locate them. The DIG64 HCDP
+ table[1] does tell the kernel where potential serial console
+ devices are, but not all firmware supplies it. Also, EFI supports
+ multiple simultaneous consoles and doesn't tell the kernel which
+ should be the "primary" one.
+
+ So how do you tell Linux which console device to use?
+
+ - If your firmware supplies the HCDP, it is simplest to
+ configure EFI with a single device (either a UART or a VGA
+ card) as the console. Then you don't need to tell Linux
+ anything; the kernel will automatically use the EFI console.
+
+ (This works only in 2.6.6 or later; prior to that you had
+ to specify "console=ttyS0" to get a serial console.)
+
+ - Without an HCDP, Linux defaults to a VGA console unless you
+ specify a "console=" argument.
+
+ NOTE: Don't assume that a serial console device will be /dev/ttyS0.
+ It might be ttyS1, ttyS2, etc. Make sure you have the appropriate
+ entries in /etc/inittab (for getty) and /etc/securetty (to allow
+ root login).
+
+Early Serial Console
+====================
+
+ The kernel can't start using a serial console until it knows where
+ the device lives. Normally this happens when the driver enumerates
+ all the serial devices, which can happen a minute or more after the
+ kernel starts booting.
+
+ 2.6.10 and later kernels have an "early uart" driver that works
+ very early in the boot process. The kernel will automatically use
+ this if the user supplies an argument like "console=uart,io,0x3f8",
+ or if the EFI console path contains only a UART device and the
+ firmware supplies an HCDP.
+
+Troubleshooting Serial Console Problems
+=======================================
+
+ No kernel output after elilo prints "Uncompressing Linux... done":
+
+ - You specified "console=ttyS0" but Linux changed the device
+ to which ttyS0 refers. Configure exactly one EFI console
+ device[3] and remove the "console=" option.
+
+ - The EFI console path contains both a VGA device and a UART.
+ EFI and elilo use both, but Linux defaults to VGA. Remove
+ the VGA device from the EFI console path[3].
+
+ - Multiple UARTs selected as EFI console devices. EFI and
+ elilo use all selected devices, but Linux uses only one.
+ Make sure only one UART is selected in the EFI console
+ path[3].
+
+ - You're connected to an HP MP port[2] but have a non-MP UART
+ selected as EFI console device. EFI uses the MP as a
+ console device even when it isn't explicitly selected.
+ Either move the console cable to the non-MP UART, or change
+ the EFI console path[3] to the MP UART.
+
+ Long pause (60+ seconds) between "Uncompressing Linux... done" and
+ start of kernel output:
+
+ - No early console because you used "console=ttyS<n>". Remove
+ the "console=" option if your firmware supplies an HCDP.
+
+ - If you don't have an HCDP, the kernel doesn't know where
+ your console lives until the driver discovers serial
+ devices. Use "console=uart,io,0x3f8" (or appropriate
+ address for your machine).
+
+ Kernel and init script output works fine, but no "login:" prompt:
+
+ - Add getty entry to /etc/inittab for console tty. Look for
+ the "Adding console on ttyS<n>" message that tells you which
+ device is the console.
+
+ "login:" prompt, but can't login as root:
+
+ - Add entry to /etc/securetty for console tty.
+
+ No ACPI serial devices found in 2.6.17 or later:
+
+ - Turn on CONFIG_PNP and CONFIG_PNPACPI. Prior to 2.6.17, ACPI
+ serial devices were discovered by 8250_acpi. In 2.6.17,
+ 8250_acpi was replaced by the combination of 8250_pnp and
+ CONFIG_PNPACPI.
+
+
+
+[1]
+ http://www.dig64.org/specifications/agreement
+ The table was originally defined as the "HCDP" for "Headless
+ Console/Debug Port." The current version is the "PCDP" for
+ "Primary Console and Debug Port Devices."
+
+[2]
+ The HP MP (management processor) is a PCI device that provides
+ several UARTs. One of the UARTs is often used as a console; the
+ EFI Boot Manager identifies it as "Acpi(HWP0002,700)/Pci(...)/Uart".
+ The external connection is usually a 25-pin connector, and a
+ special dongle converts that to three 9-pin connectors, one of
+ which is labelled "Console."
+
+[3]
+ EFI console devices are configured using the EFI Boot Manager
+ "Boot option maintenance" menu. You may have to interrupt the
+ boot sequence to use this menu, and you will have to reset the
+ box after changing console configuration.