summaryrefslogtreecommitdiffstats
path: root/Documentation/input/devices/appletouch.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/input/devices/appletouch.rst94
1 files changed, 94 insertions, 0 deletions
diff --git a/Documentation/input/devices/appletouch.rst b/Documentation/input/devices/appletouch.rst
new file mode 100644
index 000000000..c94470e66
--- /dev/null
+++ b/Documentation/input/devices/appletouch.rst
@@ -0,0 +1,94 @@
+.. include:: <isonum.txt>
+
+----------------------------------
+Apple Touchpad Driver (appletouch)
+----------------------------------
+
+:Copyright: |copy| 2005 Stelian Pop <stelian@popies.net>
+
+appletouch is a Linux kernel driver for the USB touchpad found on post
+February 2005 and October 2005 Apple Aluminium Powerbooks.
+
+This driver is derived from Johannes Berg's appletrackpad driver [#f1]_,
+but it has been improved in some areas:
+
+ * appletouch is a full kernel driver, no userspace program is necessary
+ * appletouch can be interfaced with the synaptics X11 driver, in order
+ to have touchpad acceleration, scrolling, etc.
+
+Credits go to Johannes Berg for reverse-engineering the touchpad protocol,
+Frank Arnold for further improvements, and Alex Harper for some additional
+information about the inner workings of the touchpad sensors. Michael
+Hanselmann added support for the October 2005 models.
+
+Usage
+-----
+
+In order to use the touchpad in the basic mode, compile the driver and load
+the module. A new input device will be detected and you will be able to read
+the mouse data from /dev/input/mice (using gpm, or X11).
+
+In X11, you can configure the touchpad to use the synaptics X11 driver, which
+will give additional functionalities, like acceleration, scrolling, 2 finger
+tap for middle button mouse emulation, 3 finger tap for right button mouse
+emulation, etc. In order to do this, make sure you're using a recent version of
+the synaptics driver (tested with 0.14.2, available from [#f2]_), and configure
+a new input device in your X11 configuration file (take a look below for an
+example). For additional configuration, see the synaptics driver documentation::
+
+ Section "InputDevice"
+ Identifier "Synaptics Touchpad"
+ Driver "synaptics"
+ Option "SendCoreEvents" "true"
+ Option "Device" "/dev/input/mice"
+ Option "Protocol" "auto-dev"
+ Option "LeftEdge" "0"
+ Option "RightEdge" "850"
+ Option "TopEdge" "0"
+ Option "BottomEdge" "645"
+ Option "MinSpeed" "0.4"
+ Option "MaxSpeed" "1"
+ Option "AccelFactor" "0.02"
+ Option "FingerLow" "0"
+ Option "FingerHigh" "30"
+ Option "MaxTapMove" "20"
+ Option "MaxTapTime" "100"
+ Option "HorizScrollDelta" "0"
+ Option "VertScrollDelta" "30"
+ Option "SHMConfig" "on"
+ EndSection
+
+ Section "ServerLayout"
+ ...
+ InputDevice "Mouse"
+ InputDevice "Synaptics Touchpad"
+ ...
+ EndSection
+
+Fuzz problems
+-------------
+
+The touchpad sensors are very sensitive to heat, and will generate a lot of
+noise when the temperature changes. This is especially true when you power-on
+the laptop for the first time.
+
+The appletouch driver tries to handle this noise and auto adapt itself, but it
+is not perfect. If finger movements are not recognized anymore, try reloading
+the driver.
+
+You can activate debugging using the 'debug' module parameter. A value of 0
+deactivates any debugging, 1 activates tracing of invalid samples, 2 activates
+full tracing (each sample is being traced)::
+
+ modprobe appletouch debug=1
+
+or::
+
+ echo "1" > /sys/module/appletouch/parameters/debug
+
+
+.. Links:
+
+.. [#f1] http://johannes.sipsolutions.net/PowerBook/touchpad/
+
+.. [#f2] `<http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html>`_