diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/networking/checksum-offloads.rst | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/Documentation/networking/checksum-offloads.rst b/Documentation/networking/checksum-offloads.rst new file mode 100644 index 000000000..69b23cf68 --- /dev/null +++ b/Documentation/networking/checksum-offloads.rst @@ -0,0 +1,143 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +Checksum Offloads +================= + + +Introduction +============ + +This document describes a set of techniques in the Linux networking stack to +take advantage of checksum offload capabilities of various NICs. + +The following technologies are described: + +* TX Checksum Offload +* LCO: Local Checksum Offload +* RCO: Remote Checksum Offload + +Things that should be documented here but aren't yet: + +* RX Checksum Offload +* CHECKSUM_UNNECESSARY conversion + + +TX Checksum Offload +=================== + +The interface for offloading a transmit checksum to a device is explained in +detail in comments near the top of include/linux/skbuff.h. + +In brief, it allows to request the device fill in a single ones-complement +checksum defined by the sk_buff fields skb->csum_start and skb->csum_offset. +The device should compute the 16-bit ones-complement checksum (i.e. the +'IP-style' checksum) from csum_start to the end of the packet, and fill in the +result at (csum_start + csum_offset). + +Because csum_offset cannot be negative, this ensures that the previous value of +the checksum field is included in the checksum computation, thus it can be used +to supply any needed corrections to the checksum (such as the sum of the +pseudo-header for UDP or TCP). + +This interface only allows a single checksum to be offloaded. Where +encapsulation is used, the packet may have multiple checksum fields in +different header layers, and the rest will have to be handled by another +mechanism such as LCO or RCO. + +CRC32c can also be offloaded using this interface, by means of filling +skb->csum_start and skb->csum_offset as described above, and setting +skb->csum_not_inet: see skbuff.h comment (section 'D') for more details. + +No offloading of the IP header checksum is performed; it is always done in +software. This is OK because when we build the IP header, we obviously have it +in cache, so summing it isn't expensive. It's also rather short. + +The requirements for GSO are more complicated, because when segmenting an +encapsulated packet both the inner and outer checksums may need to be edited or +recomputed for each resulting segment. See the skbuff.h comment (section 'E') +for more details. + +A driver declares its offload capabilities in netdev->hw_features; see +Documentation/networking/netdev-features.rst for more. Note that a device +which only advertises NETIF_F_IP[V6]_CSUM must still obey the csum_start and +csum_offset given in the SKB; if it tries to deduce these itself in hardware +(as some NICs do) the driver should check that the values in the SKB match +those which the hardware will deduce, and if not, fall back to checksumming in +software instead (with skb_csum_hwoffload_help() or one of the +skb_checksum_help() / skb_crc32c_csum_help functions, as mentioned in +include/linux/skbuff.h). + +The stack should, for the most part, assume that checksum offload is supported +by the underlying device. The only place that should check is +validate_xmit_skb(), and the functions it calls directly or indirectly. That +function compares the offload features requested by the SKB (which may include +other offloads besides TX Checksum Offload) and, if they are not supported or +enabled on the device (determined by netdev->features), performs the +corresponding offload in software. In the case of TX Checksum Offload, that +means calling skb_csum_hwoffload_help(skb, features). + + +LCO: Local Checksum Offload +=========================== + +LCO is a technique for efficiently computing the outer checksum of an +encapsulated datagram when the inner checksum is due to be offloaded. + +The ones-complement sum of a correctly checksummed TCP or UDP packet is equal +to the complement of the sum of the pseudo header, because everything else gets +'cancelled out' by the checksum field. This is because the sum was +complemented before being written to the checksum field. + +More generally, this holds in any case where the 'IP-style' ones complement +checksum is used, and thus any checksum that TX Checksum Offload supports. + +That is, if we have set up TX Checksum Offload with a start/offset pair, we +know that after the device has filled in that checksum, the ones complement sum +from csum_start to the end of the packet will be equal to the complement of +whatever value we put in the checksum field beforehand. This allows us to +compute the outer checksum without looking at the payload: we simply stop +summing when we get to csum_start, then add the complement of the 16-bit word +at (csum_start + csum_offset). + +Then, when the true inner checksum is filled in (either by hardware or by +skb_checksum_help()), the outer checksum will become correct by virtue of the +arithmetic. + +LCO is performed by the stack when constructing an outer UDP header for an +encapsulation such as VXLAN or GENEVE, in udp_set_csum(). Similarly for the +IPv6 equivalents, in udp6_set_csum(). + +It is also performed when constructing an IPv4 GRE header, in +net/ipv4/ip_gre.c:build_header(). It is *not* currently performed when +constructing an IPv6 GRE header; the GRE checksum is computed over the whole +packet in net/ipv6/ip6_gre.c:ip6gre_xmit2(), but it should be possible to use +LCO here as IPv6 GRE still uses an IP-style checksum. + +All of the LCO implementations use a helper function lco_csum(), in +include/linux/skbuff.h. + +LCO can safely be used for nested encapsulations; in this case, the outer +encapsulation layer will sum over both its own header and the 'middle' header. +This does mean that the 'middle' header will get summed multiple times, but +there doesn't seem to be a way to avoid that without incurring bigger costs +(e.g. in SKB bloat). + + +RCO: Remote Checksum Offload +============================ + +RCO is a technique for eliding the inner checksum of an encapsulated datagram, +allowing the outer checksum to be offloaded. It does, however, involve a +change to the encapsulation protocols, which the receiver must also support. +For this reason, it is disabled by default. + +RCO is detailed in the following Internet-Drafts: + +* https://tools.ietf.org/html/draft-herbert-remotecsumoffload-00 +* https://tools.ietf.org/html/draft-herbert-vxlan-rco-00 + +In Linux, RCO is implemented individually in each encapsulation protocol, and +most tunnel types have flags controlling its use. For instance, VXLAN has the +flag VXLAN_F_REMCSUM_TX (per struct vxlan_rdst) to indicate that RCO should be +used when transmitting to a given remote destination. |