summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/rxrpc.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/networking/rxrpc.rst1178
1 files changed, 1178 insertions, 0 deletions
diff --git a/Documentation/networking/rxrpc.rst b/Documentation/networking/rxrpc.rst
new file mode 100644
index 000000000..39c2249c7
--- /dev/null
+++ b/Documentation/networking/rxrpc.rst
@@ -0,0 +1,1178 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================
+RxRPC Network Protocol
+======================
+
+The RxRPC protocol driver provides a reliable two-phase transport on top of UDP
+that can be used to perform RxRPC remote operations. This is done over sockets
+of AF_RXRPC family, using sendmsg() and recvmsg() with control data to send and
+receive data, aborts and errors.
+
+Contents of this document:
+
+ (#) Overview.
+
+ (#) RxRPC protocol summary.
+
+ (#) AF_RXRPC driver model.
+
+ (#) Control messages.
+
+ (#) Socket options.
+
+ (#) Security.
+
+ (#) Example client usage.
+
+ (#) Example server usage.
+
+ (#) AF_RXRPC kernel interface.
+
+ (#) Configurable parameters.
+
+
+Overview
+========
+
+RxRPC is a two-layer protocol. There is a session layer which provides
+reliable virtual connections using UDP over IPv4 (or IPv6) as the transport
+layer, but implements a real network protocol; and there's the presentation
+layer which renders structured data to binary blobs and back again using XDR
+(as does SunRPC)::
+
+ +-------------+
+ | Application |
+ +-------------+
+ | XDR | Presentation
+ +-------------+
+ | RxRPC | Session
+ +-------------+
+ | UDP | Transport
+ +-------------+
+
+
+AF_RXRPC provides:
+
+ (1) Part of an RxRPC facility for both kernel and userspace applications by
+ making the session part of it a Linux network protocol (AF_RXRPC).
+
+ (2) A two-phase protocol. The client transmits a blob (the request) and then
+ receives a blob (the reply), and the server receives the request and then
+ transmits the reply.
+
+ (3) Retention of the reusable bits of the transport system set up for one call
+ to speed up subsequent calls.
+
+ (4) A secure protocol, using the Linux kernel's key retention facility to
+ manage security on the client end. The server end must of necessity be
+ more active in security negotiations.
+
+AF_RXRPC does not provide XDR marshalling/presentation facilities. That is
+left to the application. AF_RXRPC only deals in blobs. Even the operation ID
+is just the first four bytes of the request blob, and as such is beyond the
+kernel's interest.
+
+
+Sockets of AF_RXRPC family are:
+
+ (1) created as type SOCK_DGRAM;
+
+ (2) provided with a protocol of the type of underlying transport they're going
+ to use - currently only PF_INET is supported.
+
+
+The Andrew File System (AFS) is an example of an application that uses this and
+that has both kernel (filesystem) and userspace (utility) components.
+
+
+RxRPC Protocol Summary
+======================
+
+An overview of the RxRPC protocol:
+
+ (#) RxRPC sits on top of another networking protocol (UDP is the only option
+ currently), and uses this to provide network transport. UDP ports, for
+ example, provide transport endpoints.
+
+ (#) RxRPC supports multiple virtual "connections" from any given transport
+ endpoint, thus allowing the endpoints to be shared, even to the same
+ remote endpoint.
+
+ (#) Each connection goes to a particular "service". A connection may not go
+ to multiple services. A service may be considered the RxRPC equivalent of
+ a port number. AF_RXRPC permits multiple services to share an endpoint.
+
+ (#) Client-originating packets are marked, thus a transport endpoint can be
+ shared between client and server connections (connections have a
+ direction).
+
+ (#) Up to a billion connections may be supported concurrently between one
+ local transport endpoint and one service on one remote endpoint. An RxRPC
+ connection is described by seven numbers::
+
+ Local address }
+ Local port } Transport (UDP) address
+ Remote address }
+ Remote port }
+ Direction
+ Connection ID
+ Service ID
+
+ (#) Each RxRPC operation is a "call". A connection may make up to four
+ billion calls, but only up to four calls may be in progress on a
+ connection at any one time.
+
+ (#) Calls are two-phase and asymmetric: the client sends its request data,
+ which the service receives; then the service transmits the reply data
+ which the client receives.
+
+ (#) The data blobs are of indefinite size, the end of a phase is marked with a
+ flag in the packet. The number of packets of data making up one blob may
+ not exceed 4 billion, however, as this would cause the sequence number to
+ wrap.
+
+ (#) The first four bytes of the request data are the service operation ID.
+
+ (#) Security is negotiated on a per-connection basis. The connection is
+ initiated by the first data packet on it arriving. If security is
+ requested, the server then issues a "challenge" and then the client
+ replies with a "response". If the response is successful, the security is
+ set for the lifetime of that connection, and all subsequent calls made
+ upon it use that same security. In the event that the server lets a
+ connection lapse before the client, the security will be renegotiated if
+ the client uses the connection again.
+
+ (#) Calls use ACK packets to handle reliability. Data packets are also
+ explicitly sequenced per call.
+
+ (#) There are two types of positive acknowledgment: hard-ACKs and soft-ACKs.
+ A hard-ACK indicates to the far side that all the data received to a point
+ has been received and processed; a soft-ACK indicates that the data has
+ been received but may yet be discarded and re-requested. The sender may
+ not discard any transmittable packets until they've been hard-ACK'd.
+
+ (#) Reception of a reply data packet implicitly hard-ACK's all the data
+ packets that make up the request.
+
+ (#) An call is complete when the request has been sent, the reply has been
+ received and the final hard-ACK on the last packet of the reply has
+ reached the server.
+
+ (#) An call may be aborted by either end at any time up to its completion.
+
+
+AF_RXRPC Driver Model
+=====================
+
+About the AF_RXRPC driver:
+
+ (#) The AF_RXRPC protocol transparently uses internal sockets of the transport
+ protocol to represent transport endpoints.
+
+ (#) AF_RXRPC sockets map onto RxRPC connection bundles. Actual RxRPC
+ connections are handled transparently. One client socket may be used to
+ make multiple simultaneous calls to the same service. One server socket
+ may handle calls from many clients.
+
+ (#) Additional parallel client connections will be initiated to support extra
+ concurrent calls, up to a tunable limit.
+
+ (#) Each connection is retained for a certain amount of time [tunable] after
+ the last call currently using it has completed in case a new call is made
+ that could reuse it.
+
+ (#) Each internal UDP socket is retained [tunable] for a certain amount of
+ time [tunable] after the last connection using it discarded, in case a new
+ connection is made that could use it.
+
+ (#) A client-side connection is only shared between calls if they have
+ the same key struct describing their security (and assuming the calls
+ would otherwise share the connection). Non-secured calls would also be
+ able to share connections with each other.
+
+ (#) A server-side connection is shared if the client says it is.
+
+ (#) ACK'ing is handled by the protocol driver automatically, including ping
+ replying.
+
+ (#) SO_KEEPALIVE automatically pings the other side to keep the connection
+ alive [TODO].
+
+ (#) If an ICMP error is received, all calls affected by that error will be
+ aborted with an appropriate network error passed through recvmsg().
+
+
+Interaction with the user of the RxRPC socket:
+
+ (#) A socket is made into a server socket by binding an address with a
+ non-zero service ID.
+
+ (#) In the client, sending a request is achieved with one or more sendmsgs,
+ followed by the reply being received with one or more recvmsgs.
+
+ (#) The first sendmsg for a request to be sent from a client contains a tag to
+ be used in all other sendmsgs or recvmsgs associated with that call. The
+ tag is carried in the control data.
+
+ (#) connect() is used to supply a default destination address for a client
+ socket. This may be overridden by supplying an alternate address to the
+ first sendmsg() of a call (struct msghdr::msg_name).
+
+ (#) If connect() is called on an unbound client, a random local port will
+ bound before the operation takes place.
+
+ (#) A server socket may also be used to make client calls. To do this, the
+ first sendmsg() of the call must specify the target address. The server's
+ transport endpoint is used to send the packets.
+
+ (#) Once the application has received the last message associated with a call,
+ the tag is guaranteed not to be seen again, and so it can be used to pin
+ client resources. A new call can then be initiated with the same tag
+ without fear of interference.
+
+ (#) In the server, a request is received with one or more recvmsgs, then the
+ the reply is transmitted with one or more sendmsgs, and then the final ACK
+ is received with a last recvmsg.
+
+ (#) When sending data for a call, sendmsg is given MSG_MORE if there's more
+ data to come on that call.
+
+ (#) When receiving data for a call, recvmsg flags MSG_MORE if there's more
+ data to come for that call.
+
+ (#) When receiving data or messages for a call, MSG_EOR is flagged by recvmsg
+ to indicate the terminal message for that call.
+
+ (#) A call may be aborted by adding an abort control message to the control
+ data. Issuing an abort terminates the kernel's use of that call's tag.
+ Any messages waiting in the receive queue for that call will be discarded.
+
+ (#) Aborts, busy notifications and challenge packets are delivered by recvmsg,
+ and control data messages will be set to indicate the context. Receiving
+ an abort or a busy message terminates the kernel's use of that call's tag.
+
+ (#) The control data part of the msghdr struct is used for a number of things:
+
+ (#) The tag of the intended or affected call.
+
+ (#) Sending or receiving errors, aborts and busy notifications.
+
+ (#) Notifications of incoming calls.
+
+ (#) Sending debug requests and receiving debug replies [TODO].
+
+ (#) When the kernel has received and set up an incoming call, it sends a
+ message to server application to let it know there's a new call awaiting
+ its acceptance [recvmsg reports a special control message]. The server
+ application then uses sendmsg to assign a tag to the new call. Once that
+ is done, the first part of the request data will be delivered by recvmsg.
+
+ (#) The server application has to provide the server socket with a keyring of
+ secret keys corresponding to the security types it permits. When a secure
+ connection is being set up, the kernel looks up the appropriate secret key
+ in the keyring and then sends a challenge packet to the client and
+ receives a response packet. The kernel then checks the authorisation of
+ the packet and either aborts the connection or sets up the security.
+
+ (#) The name of the key a client will use to secure its communications is
+ nominated by a socket option.
+
+
+Notes on sendmsg:
+
+ (#) MSG_WAITALL can be set to tell sendmsg to ignore signals if the peer is
+ making progress at accepting packets within a reasonable time such that we
+ manage to queue up all the data for transmission. This requires the
+ client to accept at least one packet per 2*RTT time period.
+
+ If this isn't set, sendmsg() will return immediately, either returning
+ EINTR/ERESTARTSYS if nothing was consumed or returning the amount of data
+ consumed.
+
+
+Notes on recvmsg:
+
+ (#) If there's a sequence of data messages belonging to a particular call on
+ the receive queue, then recvmsg will keep working through them until:
+
+ (a) it meets the end of that call's received data,
+
+ (b) it meets a non-data message,
+
+ (c) it meets a message belonging to a different call, or
+
+ (d) it fills the user buffer.
+
+ If recvmsg is called in blocking mode, it will keep sleeping, awaiting the
+ reception of further data, until one of the above four conditions is met.
+
+ (2) MSG_PEEK operates similarly, but will return immediately if it has put any
+ data in the buffer rather than sleeping until it can fill the buffer.
+
+ (3) If a data message is only partially consumed in filling a user buffer,
+ then the remainder of that message will be left on the front of the queue
+ for the next taker. MSG_TRUNC will never be flagged.
+
+ (4) If there is more data to be had on a call (it hasn't copied the last byte
+ of the last data message in that phase yet), then MSG_MORE will be
+ flagged.
+
+
+Control Messages
+================
+
+AF_RXRPC makes use of control messages in sendmsg() and recvmsg() to multiplex
+calls, to invoke certain actions and to report certain conditions. These are:
+
+ ======================= === =========== ===============================
+ MESSAGE ID SRT DATA MEANING
+ ======================= === =========== ===============================
+ RXRPC_USER_CALL_ID sr- User ID App's call specifier
+ RXRPC_ABORT srt Abort code Abort code to issue/received
+ RXRPC_ACK -rt n/a Final ACK received
+ RXRPC_NET_ERROR -rt error num Network error on call
+ RXRPC_BUSY -rt n/a Call rejected (server busy)
+ RXRPC_LOCAL_ERROR -rt error num Local error encountered
+ RXRPC_NEW_CALL -r- n/a New call received
+ RXRPC_ACCEPT s-- n/a Accept new call
+ RXRPC_EXCLUSIVE_CALL s-- n/a Make an exclusive client call
+ RXRPC_UPGRADE_SERVICE s-- n/a Client call can be upgraded
+ RXRPC_TX_LENGTH s-- data len Total length of Tx data
+ ======================= === =========== ===============================
+
+ (SRT = usable in Sendmsg / delivered by Recvmsg / Terminal message)
+
+ (#) RXRPC_USER_CALL_ID
+
+ This is used to indicate the application's call ID. It's an unsigned long
+ that the app specifies in the client by attaching it to the first data
+ message or in the server by passing it in association with an RXRPC_ACCEPT
+ message. recvmsg() passes it in conjunction with all messages except
+ those of the RXRPC_NEW_CALL message.
+
+ (#) RXRPC_ABORT
+
+ This is can be used by an application to abort a call by passing it to
+ sendmsg, or it can be delivered by recvmsg to indicate a remote abort was
+ received. Either way, it must be associated with an RXRPC_USER_CALL_ID to
+ specify the call affected. If an abort is being sent, then error EBADSLT
+ will be returned if there is no call with that user ID.
+
+ (#) RXRPC_ACK
+
+ This is delivered to a server application to indicate that the final ACK
+ of a call was received from the client. It will be associated with an
+ RXRPC_USER_CALL_ID to indicate the call that's now complete.
+
+ (#) RXRPC_NET_ERROR
+
+ This is delivered to an application to indicate that an ICMP error message
+ was encountered in the process of trying to talk to the peer. An
+ errno-class integer value will be included in the control message data
+ indicating the problem, and an RXRPC_USER_CALL_ID will indicate the call
+ affected.
+
+ (#) RXRPC_BUSY
+
+ This is delivered to a client application to indicate that a call was
+ rejected by the server due to the server being busy. It will be
+ associated with an RXRPC_USER_CALL_ID to indicate the rejected call.
+
+ (#) RXRPC_LOCAL_ERROR
+
+ This is delivered to an application to indicate that a local error was
+ encountered and that a call has been aborted because of it. An
+ errno-class integer value will be included in the control message data
+ indicating the problem, and an RXRPC_USER_CALL_ID will indicate the call
+ affected.
+
+ (#) RXRPC_NEW_CALL
+
+ This is delivered to indicate to a server application that a new call has
+ arrived and is awaiting acceptance. No user ID is associated with this,
+ as a user ID must subsequently be assigned by doing an RXRPC_ACCEPT.
+
+ (#) RXRPC_ACCEPT
+
+ This is used by a server application to attempt to accept a call and
+ assign it a user ID. It should be associated with an RXRPC_USER_CALL_ID
+ to indicate the user ID to be assigned. If there is no call to be
+ accepted (it may have timed out, been aborted, etc.), then sendmsg will
+ return error ENODATA. If the user ID is already in use by another call,
+ then error EBADSLT will be returned.
+
+ (#) RXRPC_EXCLUSIVE_CALL
+
+ This is used to indicate that a client call should be made on a one-off
+ connection. The connection is discarded once the call has terminated.
+
+ (#) RXRPC_UPGRADE_SERVICE
+
+ This is used to make a client call to probe if the specified service ID
+ may be upgraded by the server. The caller must check msg_name returned to
+ recvmsg() for the service ID actually in use. The operation probed must
+ be one that takes the same arguments in both services.
+
+ Once this has been used to establish the upgrade capability (or lack
+ thereof) of the server, the service ID returned should be used for all
+ future communication to that server and RXRPC_UPGRADE_SERVICE should no
+ longer be set.
+
+ (#) RXRPC_TX_LENGTH
+
+ This is used to inform the kernel of the total amount of data that is
+ going to be transmitted by a call (whether in a client request or a
+ service response). If given, it allows the kernel to encrypt from the
+ userspace buffer directly to the packet buffers, rather than copying into
+ the buffer and then encrypting in place. This may only be given with the
+ first sendmsg() providing data for a call. EMSGSIZE will be generated if
+ the amount of data actually given is different.
+
+ This takes a parameter of __s64 type that indicates how much will be
+ transmitted. This may not be less than zero.
+
+The symbol RXRPC__SUPPORTED is defined as one more than the highest control
+message type supported. At run time this can be queried by means of the
+RXRPC_SUPPORTED_CMSG socket option (see below).
+
+
+==============
+SOCKET OPTIONS
+==============
+
+AF_RXRPC sockets support a few socket options at the SOL_RXRPC level:
+
+ (#) RXRPC_SECURITY_KEY
+
+ This is used to specify the description of the key to be used. The key is
+ extracted from the calling process's keyrings with request_key() and
+ should be of "rxrpc" type.
+
+ The optval pointer points to the description string, and optlen indicates
+ how long the string is, without the NUL terminator.
+
+ (#) RXRPC_SECURITY_KEYRING
+
+ Similar to above but specifies a keyring of server secret keys to use (key
+ type "keyring"). See the "Security" section.
+
+ (#) RXRPC_EXCLUSIVE_CONNECTION
+
+ This is used to request that new connections should be used for each call
+ made subsequently on this socket. optval should be NULL and optlen 0.
+
+ (#) RXRPC_MIN_SECURITY_LEVEL
+
+ This is used to specify the minimum security level required for calls on
+ this socket. optval must point to an int containing one of the following
+ values:
+
+ (a) RXRPC_SECURITY_PLAIN
+
+ Encrypted checksum only.
+
+ (b) RXRPC_SECURITY_AUTH
+
+ Encrypted checksum plus packet padded and first eight bytes of packet
+ encrypted - which includes the actual packet length.
+
+ (c) RXRPC_SECURITY_ENCRYPT
+
+ Encrypted checksum plus entire packet padded and encrypted, including
+ actual packet length.
+
+ (#) RXRPC_UPGRADEABLE_SERVICE
+
+ This is used to indicate that a service socket with two bindings may
+ upgrade one bound service to the other if requested by the client. optval
+ must point to an array of two unsigned short ints. The first is the
+ service ID to upgrade from and the second the service ID to upgrade to.
+
+ (#) RXRPC_SUPPORTED_CMSG
+
+ This is a read-only option that writes an int into the buffer indicating
+ the highest control message type supported.
+
+
+========
+SECURITY
+========
+
+Currently, only the kerberos 4 equivalent protocol has been implemented
+(security index 2 - rxkad). This requires the rxkad module to be loaded and,
+on the client, tickets of the appropriate type to be obtained from the AFS
+kaserver or the kerberos server and installed as "rxrpc" type keys. This is
+normally done using the klog program. An example simple klog program can be
+found at:
+
+ http://people.redhat.com/~dhowells/rxrpc/klog.c
+
+The payload provided to add_key() on the client should be of the following
+form::
+
+ struct rxrpc_key_sec2_v1 {
+ uint16_t security_index; /* 2 */
+ uint16_t ticket_length; /* length of ticket[] */
+ uint32_t expiry; /* time at which expires */
+ uint8_t kvno; /* key version number */
+ uint8_t __pad[3];
+ uint8_t session_key[8]; /* DES session key */
+ uint8_t ticket[0]; /* the encrypted ticket */
+ };
+
+Where the ticket blob is just appended to the above structure.
+
+
+For the server, keys of type "rxrpc_s" must be made available to the server.
+They have a description of "<serviceID>:<securityIndex>" (eg: "52:2" for an
+rxkad key for the AFS VL service). When such a key is created, it should be
+given the server's secret key as the instantiation data (see the example
+below).
+
+ add_key("rxrpc_s", "52:2", secret_key, 8, keyring);
+
+A keyring is passed to the server socket by naming it in a sockopt. The server
+socket then looks the server secret keys up in this keyring when secure
+incoming connections are made. This can be seen in an example program that can
+be found at:
+
+ http://people.redhat.com/~dhowells/rxrpc/listen.c
+
+
+====================
+EXAMPLE CLIENT USAGE
+====================
+
+A client would issue an operation by:
+
+ (1) An RxRPC socket is set up by::
+
+ client = socket(AF_RXRPC, SOCK_DGRAM, PF_INET);
+
+ Where the third parameter indicates the protocol family of the transport
+ socket used - usually IPv4 but it can also be IPv6 [TODO].
+
+ (2) A local address can optionally be bound::
+
+ struct sockaddr_rxrpc srx = {
+ .srx_family = AF_RXRPC,
+ .srx_service = 0, /* we're a client */
+ .transport_type = SOCK_DGRAM, /* type of transport socket */
+ .transport.sin_family = AF_INET,
+ .transport.sin_port = htons(7000), /* AFS callback */
+ .transport.sin_address = 0, /* all local interfaces */
+ };
+ bind(client, &srx, sizeof(srx));
+
+ This specifies the local UDP port to be used. If not given, a random
+ non-privileged port will be used. A UDP port may be shared between
+ several unrelated RxRPC sockets. Security is handled on a basis of
+ per-RxRPC virtual connection.
+
+ (3) The security is set::
+
+ const char *key = "AFS:cambridge.redhat.com";
+ setsockopt(client, SOL_RXRPC, RXRPC_SECURITY_KEY, key, strlen(key));
+
+ This issues a request_key() to get the key representing the security
+ context. The minimum security level can be set::
+
+ unsigned int sec = RXRPC_SECURITY_ENCRYPT;
+ setsockopt(client, SOL_RXRPC, RXRPC_MIN_SECURITY_LEVEL,
+ &sec, sizeof(sec));
+
+ (4) The server to be contacted can then be specified (alternatively this can
+ be done through sendmsg)::
+
+ struct sockaddr_rxrpc srx = {
+ .srx_family = AF_RXRPC,
+ .srx_service = VL_SERVICE_ID,
+ .transport_type = SOCK_DGRAM, /* type of transport socket */
+ .transport.sin_family = AF_INET,
+ .transport.sin_port = htons(7005), /* AFS volume manager */
+ .transport.sin_address = ...,
+ };
+ connect(client, &srx, sizeof(srx));
+
+ (5) The request data should then be posted to the server socket using a series
+ of sendmsg() calls, each with the following control message attached:
+
+ ================== ===================================
+ RXRPC_USER_CALL_ID specifies the user ID for this call
+ ================== ===================================
+
+ MSG_MORE should be set in msghdr::msg_flags on all but the last part of
+ the request. Multiple requests may be made simultaneously.
+
+ An RXRPC_TX_LENGTH control message can also be specified on the first
+ sendmsg() call.
+
+ If a call is intended to go to a destination other than the default
+ specified through connect(), then msghdr::msg_name should be set on the
+ first request message of that call.
+
+ (6) The reply data will then be posted to the server socket for recvmsg() to
+ pick up. MSG_MORE will be flagged by recvmsg() if there's more reply data
+ for a particular call to be read. MSG_EOR will be set on the terminal
+ read for a call.
+
+ All data will be delivered with the following control message attached:
+
+ RXRPC_USER_CALL_ID - specifies the user ID for this call
+
+ If an abort or error occurred, this will be returned in the control data
+ buffer instead, and MSG_EOR will be flagged to indicate the end of that
+ call.
+
+A client may ask for a service ID it knows and ask that this be upgraded to a
+better service if one is available by supplying RXRPC_UPGRADE_SERVICE on the
+first sendmsg() of a call. The client should then check srx_service in the
+msg_name filled in by recvmsg() when collecting the result. srx_service will
+hold the same value as given to sendmsg() if the upgrade request was ignored by
+the service - otherwise it will be altered to indicate the service ID the
+server upgraded to. Note that the upgraded service ID is chosen by the server.
+The caller has to wait until it sees the service ID in the reply before sending
+any more calls (further calls to the same destination will be blocked until the
+probe is concluded).
+
+
+Example Server Usage
+====================
+
+A server would be set up to accept operations in the following manner:
+
+ (1) An RxRPC socket is created by::
+
+ server = socket(AF_RXRPC, SOCK_DGRAM, PF_INET);
+
+ Where the third parameter indicates the address type of the transport
+ socket used - usually IPv4.
+
+ (2) Security is set up if desired by giving the socket a keyring with server
+ secret keys in it::
+
+ keyring = add_key("keyring", "AFSkeys", NULL, 0,
+ KEY_SPEC_PROCESS_KEYRING);
+
+ const char secret_key[8] = {
+ 0xa7, 0x83, 0x8a, 0xcb, 0xc7, 0x83, 0xec, 0x94 };
+ add_key("rxrpc_s", "52:2", secret_key, 8, keyring);
+
+ setsockopt(server, SOL_RXRPC, RXRPC_SECURITY_KEYRING, "AFSkeys", 7);
+
+ The keyring can be manipulated after it has been given to the socket. This
+ permits the server to add more keys, replace keys, etc. while it is live.
+
+ (3) A local address must then be bound::
+
+ struct sockaddr_rxrpc srx = {
+ .srx_family = AF_RXRPC,
+ .srx_service = VL_SERVICE_ID, /* RxRPC service ID */
+ .transport_type = SOCK_DGRAM, /* type of transport socket */
+ .transport.sin_family = AF_INET,
+ .transport.sin_port = htons(7000), /* AFS callback */
+ .transport.sin_address = 0, /* all local interfaces */
+ };
+ bind(server, &srx, sizeof(srx));
+
+ More than one service ID may be bound to a socket, provided the transport
+ parameters are the same. The limit is currently two. To do this, bind()
+ should be called twice.
+
+ (4) If service upgrading is required, first two service IDs must have been
+ bound and then the following option must be set::
+
+ unsigned short service_ids[2] = { from_ID, to_ID };
+ setsockopt(server, SOL_RXRPC, RXRPC_UPGRADEABLE_SERVICE,
+ service_ids, sizeof(service_ids));
+
+ This will automatically upgrade connections on service from_ID to service
+ to_ID if they request it. This will be reflected in msg_name obtained
+ through recvmsg() when the request data is delivered to userspace.
+
+ (5) The server is then set to listen out for incoming calls::
+
+ listen(server, 100);
+
+ (6) The kernel notifies the server of pending incoming connections by sending
+ it a message for each. This is received with recvmsg() on the server
+ socket. It has no data, and has a single dataless control message
+ attached::
+
+ RXRPC_NEW_CALL
+
+ The address that can be passed back by recvmsg() at this point should be
+ ignored since the call for which the message was posted may have gone by
+ the time it is accepted - in which case the first call still on the queue
+ will be accepted.
+
+ (7) The server then accepts the new call by issuing a sendmsg() with two
+ pieces of control data and no actual data:
+
+ ================== ==============================
+ RXRPC_ACCEPT indicate connection acceptance
+ RXRPC_USER_CALL_ID specify user ID for this call
+ ================== ==============================
+
+ (8) The first request data packet will then be posted to the server socket for
+ recvmsg() to pick up. At that point, the RxRPC address for the call can
+ be read from the address fields in the msghdr struct.
+
+ Subsequent request data will be posted to the server socket for recvmsg()
+ to collect as it arrives. All but the last piece of the request data will
+ be delivered with MSG_MORE flagged.
+
+ All data will be delivered with the following control message attached:
+
+
+ ================== ===================================
+ RXRPC_USER_CALL_ID specifies the user ID for this call
+ ================== ===================================
+
+ (9) The reply data should then be posted to the server socket using a series
+ of sendmsg() calls, each with the following control messages attached:
+
+ ================== ===================================
+ RXRPC_USER_CALL_ID specifies the user ID for this call
+ ================== ===================================
+
+ MSG_MORE should be set in msghdr::msg_flags on all but the last message
+ for a particular call.
+
+(10) The final ACK from the client will be posted for retrieval by recvmsg()
+ when it is received. It will take the form of a dataless message with two
+ control messages attached:
+
+ ================== ===================================
+ RXRPC_USER_CALL_ID specifies the user ID for this call
+ RXRPC_ACK indicates final ACK (no data)
+ ================== ===================================
+
+ MSG_EOR will be flagged to indicate that this is the final message for
+ this call.
+
+(11) Up to the point the final packet of reply data is sent, the call can be
+ aborted by calling sendmsg() with a dataless message with the following
+ control messages attached:
+
+ ================== ===================================
+ RXRPC_USER_CALL_ID specifies the user ID for this call
+ RXRPC_ABORT indicates abort code (4 byte data)
+ ================== ===================================
+
+ Any packets waiting in the socket's receive queue will be discarded if
+ this is issued.
+
+Note that all the communications for a particular service take place through
+the one server socket, using control messages on sendmsg() and recvmsg() to
+determine the call affected.
+
+
+AF_RXRPC Kernel Interface
+=========================
+
+The AF_RXRPC module also provides an interface for use by in-kernel utilities
+such as the AFS filesystem. This permits such a utility to:
+
+ (1) Use different keys directly on individual client calls on one socket
+ rather than having to open a whole slew of sockets, one for each key it
+ might want to use.
+
+ (2) Avoid having RxRPC call request_key() at the point of issue of a call or
+ opening of a socket. Instead the utility is responsible for requesting a
+ key at the appropriate point. AFS, for instance, would do this during VFS
+ operations such as open() or unlink(). The key is then handed through
+ when the call is initiated.
+
+ (3) Request the use of something other than GFP_KERNEL to allocate memory.
+
+ (4) Avoid the overhead of using the recvmsg() call. RxRPC messages can be
+ intercepted before they get put into the socket Rx queue and the socket
+ buffers manipulated directly.
+
+To use the RxRPC facility, a kernel utility must still open an AF_RXRPC socket,
+bind an address as appropriate and listen if it's to be a server socket, but
+then it passes this to the kernel interface functions.
+
+The kernel interface functions are as follows:
+
+ (#) Begin a new client call::
+
+ struct rxrpc_call *
+ rxrpc_kernel_begin_call(struct socket *sock,
+ struct sockaddr_rxrpc *srx,
+ struct key *key,
+ unsigned long user_call_ID,
+ s64 tx_total_len,
+ gfp_t gfp,
+ rxrpc_notify_rx_t notify_rx,
+ bool upgrade,
+ bool intr,
+ unsigned int debug_id);
+
+ This allocates the infrastructure to make a new RxRPC call and assigns
+ call and connection numbers. The call will be made on the UDP port that
+ the socket is bound to. The call will go to the destination address of a
+ connected client socket unless an alternative is supplied (srx is
+ non-NULL).
+
+ If a key is supplied then this will be used to secure the call instead of
+ the key bound to the socket with the RXRPC_SECURITY_KEY sockopt. Calls
+ secured in this way will still share connections if at all possible.
+
+ The user_call_ID is equivalent to that supplied to sendmsg() in the
+ control data buffer. It is entirely feasible to use this to point to a
+ kernel data structure.
+
+ tx_total_len is the amount of data the caller is intending to transmit
+ with this call (or -1 if unknown at this point). Setting the data size
+ allows the kernel to encrypt directly to the packet buffers, thereby
+ saving a copy. The value may not be less than -1.
+
+ notify_rx is a pointer to a function to be called when events such as
+ incoming data packets or remote aborts happen.
+
+ upgrade should be set to true if a client operation should request that
+ the server upgrade the service to a better one. The resultant service ID
+ is returned by rxrpc_kernel_recv_data().
+
+ intr should be set to true if the call should be interruptible. If this
+ is not set, this function may not return until a channel has been
+ allocated; if it is set, the function may return -ERESTARTSYS.
+
+ debug_id is the call debugging ID to be used for tracing. This can be
+ obtained by atomically incrementing rxrpc_debug_id.
+
+ If this function is successful, an opaque reference to the RxRPC call is
+ returned. The caller now holds a reference on this and it must be
+ properly ended.
+
+ (#) End a client call::
+
+ void rxrpc_kernel_end_call(struct socket *sock,
+ struct rxrpc_call *call);
+
+ This is used to end a previously begun call. The user_call_ID is expunged
+ from AF_RXRPC's knowledge and will not be seen again in association with
+ the specified call.
+
+ (#) Send data through a call::
+
+ typedef void (*rxrpc_notify_end_tx_t)(struct sock *sk,
+ unsigned long user_call_ID,
+ struct sk_buff *skb);
+
+ int rxrpc_kernel_send_data(struct socket *sock,
+ struct rxrpc_call *call,
+ struct msghdr *msg,
+ size_t len,
+ rxrpc_notify_end_tx_t notify_end_rx);
+
+ This is used to supply either the request part of a client call or the
+ reply part of a server call. msg.msg_iovlen and msg.msg_iov specify the
+ data buffers to be used. msg_iov may not be NULL and must point
+ exclusively to in-kernel virtual addresses. msg.msg_flags may be given
+ MSG_MORE if there will be subsequent data sends for this call.
+
+ The msg must not specify a destination address, control data or any flags
+ other than MSG_MORE. len is the total amount of data to transmit.
+
+ notify_end_rx can be NULL or it can be used to specify a function to be
+ called when the call changes state to end the Tx phase. This function is
+ called with the call-state spinlock held to prevent any reply or final ACK
+ from being delivered first.
+
+ (#) Receive data from a call::
+
+ int rxrpc_kernel_recv_data(struct socket *sock,
+ struct rxrpc_call *call,
+ void *buf,
+ size_t size,
+ size_t *_offset,
+ bool want_more,
+ u32 *_abort,
+ u16 *_service)
+
+ This is used to receive data from either the reply part of a client call
+ or the request part of a service call. buf and size specify how much
+ data is desired and where to store it. *_offset is added on to buf and
+ subtracted from size internally; the amount copied into the buffer is
+ added to *_offset before returning.
+
+ want_more should be true if further data will be required after this is
+ satisfied and false if this is the last item of the receive phase.
+
+ There are three normal returns: 0 if the buffer was filled and want_more
+ was true; 1 if the buffer was filled, the last DATA packet has been
+ emptied and want_more was false; and -EAGAIN if the function needs to be
+ called again.
+
+ If the last DATA packet is processed but the buffer contains less than
+ the amount requested, EBADMSG is returned. If want_more wasn't set, but
+ more data was available, EMSGSIZE is returned.
+
+ If a remote ABORT is detected, the abort code received will be stored in
+ ``*_abort`` and ECONNABORTED will be returned.
+
+ The service ID that the call ended up with is returned into *_service.
+ This can be used to see if a call got a service upgrade.
+
+ (#) Abort a call??
+
+ ::
+
+ void rxrpc_kernel_abort_call(struct socket *sock,
+ struct rxrpc_call *call,
+ u32 abort_code);
+
+ This is used to abort a call if it's still in an abortable state. The
+ abort code specified will be placed in the ABORT message sent.
+
+ (#) Intercept received RxRPC messages::
+
+ typedef void (*rxrpc_interceptor_t)(struct sock *sk,
+ unsigned long user_call_ID,
+ struct sk_buff *skb);
+
+ void
+ rxrpc_kernel_intercept_rx_messages(struct socket *sock,
+ rxrpc_interceptor_t interceptor);
+
+ This installs an interceptor function on the specified AF_RXRPC socket.
+ All messages that would otherwise wind up in the socket's Rx queue are
+ then diverted to this function. Note that care must be taken to process
+ the messages in the right order to maintain DATA message sequentiality.
+
+ The interceptor function itself is provided with the address of the socket
+ and handling the incoming message, the ID assigned by the kernel utility
+ to the call and the socket buffer containing the message.
+
+ The skb->mark field indicates the type of message:
+
+ =============================== =======================================
+ Mark Meaning
+ =============================== =======================================
+ RXRPC_SKB_MARK_DATA Data message
+ RXRPC_SKB_MARK_FINAL_ACK Final ACK received for an incoming call
+ RXRPC_SKB_MARK_BUSY Client call rejected as server busy
+ RXRPC_SKB_MARK_REMOTE_ABORT Call aborted by peer
+ RXRPC_SKB_MARK_NET_ERROR Network error detected
+ RXRPC_SKB_MARK_LOCAL_ERROR Local error encountered
+ RXRPC_SKB_MARK_NEW_CALL New incoming call awaiting acceptance
+ =============================== =======================================
+
+ The remote abort message can be probed with rxrpc_kernel_get_abort_code().
+ The two error messages can be probed with rxrpc_kernel_get_error_number().
+ A new call can be accepted with rxrpc_kernel_accept_call().
+
+ Data messages can have their contents extracted with the usual bunch of
+ socket buffer manipulation functions. A data message can be determined to
+ be the last one in a sequence with rxrpc_kernel_is_data_last(). When a
+ data message has been used up, rxrpc_kernel_data_consumed() should be
+ called on it.
+
+ Messages should be handled to rxrpc_kernel_free_skb() to dispose of. It
+ is possible to get extra refs on all types of message for later freeing,
+ but this may pin the state of a call until the message is finally freed.
+
+ (#) Accept an incoming call::
+
+ struct rxrpc_call *
+ rxrpc_kernel_accept_call(struct socket *sock,
+ unsigned long user_call_ID);
+
+ This is used to accept an incoming call and to assign it a call ID. This
+ function is similar to rxrpc_kernel_begin_call() and calls accepted must
+ be ended in the same way.
+
+ If this function is successful, an opaque reference to the RxRPC call is
+ returned. The caller now holds a reference on this and it must be
+ properly ended.
+
+ (#) Reject an incoming call::
+
+ int rxrpc_kernel_reject_call(struct socket *sock);
+
+ This is used to reject the first incoming call on the socket's queue with
+ a BUSY message. -ENODATA is returned if there were no incoming calls.
+ Other errors may be returned if the call had been aborted (-ECONNABORTED)
+ or had timed out (-ETIME).
+
+ (#) Allocate a null key for doing anonymous security::
+
+ struct key *rxrpc_get_null_key(const char *keyname);
+
+ This is used to allocate a null RxRPC key that can be used to indicate
+ anonymous security for a particular domain.
+
+ (#) Get the peer address of a call::
+
+ void rxrpc_kernel_get_peer(struct socket *sock, struct rxrpc_call *call,
+ struct sockaddr_rxrpc *_srx);
+
+ This is used to find the remote peer address of a call.
+
+ (#) Set the total transmit data size on a call::
+
+ void rxrpc_kernel_set_tx_length(struct socket *sock,
+ struct rxrpc_call *call,
+ s64 tx_total_len);
+
+ This sets the amount of data that the caller is intending to transmit on a
+ call. It's intended to be used for setting the reply size as the request
+ size should be set when the call is begun. tx_total_len may not be less
+ than zero.
+
+ (#) Get call RTT::
+
+ u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call);
+
+ Get the RTT time to the peer in use by a call. The value returned is in
+ nanoseconds.
+
+ (#) Check call still alive::
+
+ bool rxrpc_kernel_check_life(struct socket *sock,
+ struct rxrpc_call *call,
+ u32 *_life);
+ void rxrpc_kernel_probe_life(struct socket *sock,
+ struct rxrpc_call *call);
+
+ The first function passes back in ``*_life`` a number that is updated when
+ ACKs are received from the peer (notably including PING RESPONSE ACKs
+ which we can elicit by sending PING ACKs to see if the call still exists
+ on the server). The caller should compare the numbers of two calls to see
+ if the call is still alive after waiting for a suitable interval. It also
+ returns true as long as the call hasn't yet reached the completed state.
+
+ This allows the caller to work out if the server is still contactable and
+ if the call is still alive on the server while waiting for the server to
+ process a client operation.
+
+ The second function causes a ping ACK to be transmitted to try to provoke
+ the peer into responding, which would then cause the value returned by the
+ first function to change. Note that this must be called in TASK_RUNNING
+ state.
+
+ (#) Get reply timestamp::
+
+ bool rxrpc_kernel_get_reply_time(struct socket *sock,
+ struct rxrpc_call *call,
+ ktime_t *_ts)
+
+ This allows the timestamp on the first DATA packet of the reply of a
+ client call to be queried, provided that it is still in the Rx ring. If
+ successful, the timestamp will be stored into ``*_ts`` and true will be
+ returned; false will be returned otherwise.
+
+ (#) Get remote client epoch::
+
+ u32 rxrpc_kernel_get_epoch(struct socket *sock,
+ struct rxrpc_call *call)
+
+ This allows the epoch that's contained in packets of an incoming client
+ call to be queried. This value is returned. The function always
+ successful if the call is still in progress. It shouldn't be called once
+ the call has expired. Note that calling this on a local client call only
+ returns the local epoch.
+
+ This value can be used to determine if the remote client has been
+ restarted as it shouldn't change otherwise.
+
+ (#) Set the maxmimum lifespan on a call::
+
+ void rxrpc_kernel_set_max_life(struct socket *sock,
+ struct rxrpc_call *call,
+ unsigned long hard_timeout)
+
+ This sets the maximum lifespan on a call to hard_timeout (which is in
+ jiffies). In the event of the timeout occurring, the call will be
+ aborted and -ETIME or -ETIMEDOUT will be returned.
+
+ (#) Apply the RXRPC_MIN_SECURITY_LEVEL sockopt to a socket from within in the
+ kernel::
+
+ int rxrpc_sock_set_min_security_level(struct sock *sk,
+ unsigned int val);
+
+ This specifies the minimum security level required for calls on this
+ socket.
+
+
+Configurable Parameters
+=======================
+
+The RxRPC protocol driver has a number of configurable parameters that can be
+adjusted through sysctls in /proc/net/rxrpc/:
+
+ (#) req_ack_delay
+
+ The amount of time in milliseconds after receiving a packet with the
+ request-ack flag set before we honour the flag and actually send the
+ requested ack.
+
+ Usually the other side won't stop sending packets until the advertised
+ reception window is full (to a maximum of 255 packets), so delaying the
+ ACK permits several packets to be ACK'd in one go.
+
+ (#) soft_ack_delay
+
+ The amount of time in milliseconds after receiving a new packet before we
+ generate a soft-ACK to tell the sender that it doesn't need to resend.
+
+ (#) idle_ack_delay
+
+ The amount of time in milliseconds after all the packets currently in the
+ received queue have been consumed before we generate a hard-ACK to tell
+ the sender it can free its buffers, assuming no other reason occurs that
+ we would send an ACK.
+
+ (#) resend_timeout
+
+ The amount of time in milliseconds after transmitting a packet before we
+ transmit it again, assuming no ACK is received from the receiver telling
+ us they got it.
+
+ (#) max_call_lifetime
+
+ The maximum amount of time in seconds that a call may be in progress
+ before we preemptively kill it.
+
+ (#) dead_call_expiry
+
+ The amount of time in seconds before we remove a dead call from the call
+ list. Dead calls are kept around for a little while for the purpose of
+ repeating ACK and ABORT packets.
+
+ (#) connection_expiry
+
+ The amount of time in seconds after a connection was last used before we
+ remove it from the connection list. While a connection is in existence,
+ it serves as a placeholder for negotiated security; when it is deleted,
+ the security must be renegotiated.
+
+ (#) transport_expiry
+
+ The amount of time in seconds after a transport was last used before we
+ remove it from the transport list. While a transport is in existence, it
+ serves to anchor the peer data and keeps the connection ID counter.
+
+ (#) rxrpc_rx_window_size
+
+ The size of the receive window in packets. This is the maximum number of
+ unconsumed received packets we're willing to hold in memory for any
+ particular call.
+
+ (#) rxrpc_rx_mtu
+
+ The maximum packet MTU size that we're willing to receive in bytes. This
+ indicates to the peer whether we're willing to accept jumbo packets.
+
+ (#) rxrpc_rx_jumbo_max
+
+ The maximum number of packets that we're willing to accept in a jumbo
+ packet. Non-terminal packets in a jumbo packet must contain a four byte
+ header plus exactly 1412 bytes of data. The terminal packet must contain
+ a four byte header plus any amount of data. In any event, a jumbo packet
+ may not exceed rxrpc_rx_mtu in size.