summaryrefslogtreecommitdiffstats
path: root/Documentation/trace/ring-buffer-design.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/trace/ring-buffer-design.rst983
1 files changed, 983 insertions, 0 deletions
diff --git a/Documentation/trace/ring-buffer-design.rst b/Documentation/trace/ring-buffer-design.rst
new file mode 100644
index 000000000..c5d77fcbb
--- /dev/null
+++ b/Documentation/trace/ring-buffer-design.rst
@@ -0,0 +1,983 @@
+.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.2-no-invariants-only
+
+===========================
+Lockless Ring Buffer Design
+===========================
+
+Copyright 2009 Red Hat Inc.
+
+:Author: Steven Rostedt <srostedt@redhat.com>
+:License: The GNU Free Documentation License, Version 1.2
+ (dual licensed under the GPL v2)
+:Reviewers: Mathieu Desnoyers, Huang Ying, Hidetoshi Seto,
+ and Frederic Weisbecker.
+
+
+Written for: 2.6.31
+
+Terminology used in this Document
+---------------------------------
+
+tail
+ - where new writes happen in the ring buffer.
+
+head
+ - where new reads happen in the ring buffer.
+
+producer
+ - the task that writes into the ring buffer (same as writer)
+
+writer
+ - same as producer
+
+consumer
+ - the task that reads from the buffer (same as reader)
+
+reader
+ - same as consumer.
+
+reader_page
+ - A page outside the ring buffer used solely (for the most part)
+ by the reader.
+
+head_page
+ - a pointer to the page that the reader will use next
+
+tail_page
+ - a pointer to the page that will be written to next
+
+commit_page
+ - a pointer to the page with the last finished non-nested write.
+
+cmpxchg
+ - hardware-assisted atomic transaction that performs the following::
+
+ A = B if previous A == C
+
+ R = cmpxchg(A, C, B) is saying that we replace A with B if and only
+ if current A is equal to C, and we put the old (current)
+ A into R
+
+ R gets the previous A regardless if A is updated with B or not.
+
+ To see if the update was successful a compare of ``R == C``
+ may be used.
+
+The Generic Ring Buffer
+-----------------------
+
+The ring buffer can be used in either an overwrite mode or in
+producer/consumer mode.
+
+Producer/consumer mode is where if the producer were to fill up the
+buffer before the consumer could free up anything, the producer
+will stop writing to the buffer. This will lose most recent events.
+
+Overwrite mode is where if the producer were to fill up the buffer
+before the consumer could free up anything, the producer will
+overwrite the older data. This will lose the oldest events.
+
+No two writers can write at the same time (on the same per-cpu buffer),
+but a writer may interrupt another writer, but it must finish writing
+before the previous writer may continue. This is very important to the
+algorithm. The writers act like a "stack". The way interrupts works
+enforces this behavior::
+
+
+ writer1 start
+ <preempted> writer2 start
+ <preempted> writer3 start
+ writer3 finishes
+ writer2 finishes
+ writer1 finishes
+
+This is very much like a writer being preempted by an interrupt and
+the interrupt doing a write as well.
+
+Readers can happen at any time. But no two readers may run at the
+same time, nor can a reader preempt/interrupt another reader. A reader
+cannot preempt/interrupt a writer, but it may read/consume from the
+buffer at the same time as a writer is writing, but the reader must be
+on another processor to do so. A reader may read on its own processor
+and can be preempted by a writer.
+
+A writer can preempt a reader, but a reader cannot preempt a writer.
+But a reader can read the buffer at the same time (on another processor)
+as a writer.
+
+The ring buffer is made up of a list of pages held together by a linked list.
+
+At initialization a reader page is allocated for the reader that is not
+part of the ring buffer.
+
+The head_page, tail_page and commit_page are all initialized to point
+to the same page.
+
+The reader page is initialized to have its next pointer pointing to
+the head page, and its previous pointer pointing to a page before
+the head page.
+
+The reader has its own page to use. At start up time, this page is
+allocated but is not attached to the list. When the reader wants
+to read from the buffer, if its page is empty (like it is on start-up),
+it will swap its page with the head_page. The old reader page will
+become part of the ring buffer and the head_page will be removed.
+The page after the inserted page (old reader_page) will become the
+new head page.
+
+Once the new page is given to the reader, the reader could do what
+it wants with it, as long as a writer has left that page.
+
+A sample of how the reader page is swapped: Note this does not
+show the head page in the buffer, it is for demonstrating a swap
+only.
+
+::
+
+ +------+
+ |reader| RING BUFFER
+ |page |
+ +------+
+ +---+ +---+ +---+
+ | |-->| |-->| |
+ | |<--| |<--| |
+ +---+ +---+ +---+
+ ^ | ^ |
+ | +-------------+ |
+ +-----------------+
+
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------------------+
+ +------+ v
+ | +---+ +---+ +---+
+ | | |-->| |-->| |
+ | | |<--| |<--| |<-+
+ | +---+ +---+ +---+ |
+ | ^ | ^ | |
+ | | +-------------+ | |
+ | +-----------------+ |
+ +------------------------------------+
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------------------+
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | |-->| |-->| |
+ | | | | | |<--| |<-+
+ | | +---+ +---+ +---+ |
+ | | | ^ | |
+ | | +-------------+ | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+ +------+
+ |buffer| RING BUFFER
+ |page |-------------------+
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | | | |-->| |
+ | | New | | | |<--| |<-+
+ | | Reader +---+ +---+ +---+ |
+ | | page ----^ | |
+ | | | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+
+
+It is possible that the page swapped is the commit page and the tail page,
+if what is in the ring buffer is less than what is held in a buffer page.
+
+::
+
+ reader page commit page tail page
+ | | |
+ v | |
+ +---+ | |
+ | |<----------+ |
+ | |<------------------------+
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+This case is still valid for this algorithm.
+When the writer leaves the page, it simply goes into the ring buffer
+since the reader page still points to the next location in the ring
+buffer.
+
+
+The main pointers:
+
+ reader page
+ - The page used solely by the reader and is not part
+ of the ring buffer (may be swapped in)
+
+ head page
+ - the next page in the ring buffer that will be swapped
+ with the reader page.
+
+ tail page
+ - the page where the next write will take place.
+
+ commit page
+ - the page that last finished a write.
+
+The commit page only is updated by the outermost writer in the
+writer stack. A writer that preempts another writer will not move the
+commit page.
+
+When data is written into the ring buffer, a position is reserved
+in the ring buffer and passed back to the writer. When the writer
+is finished writing data into that position, it commits the write.
+
+Another write (or a read) may take place at anytime during this
+transaction. If another write happens it must finish before continuing
+with the previous write.
+
+
+ Write reserve::
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+ <--- given back to writer (current commit)
+ |reserved |
+ +---------+ <--- tail pointer
+ | empty |
+ +---------+
+
+ Write commit::
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+
+ |written |
+ +---------+ <--- next position for write (current commit)
+ | empty |
+ +---------+
+
+
+ If a write happens after the first reserve::
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+ <-- current commit
+ |reserved |
+ +---------+ <--- given back to second writer
+ |reserved |
+ +---------+ <--- tail pointer
+
+ After second writer commits::
+
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+ <--(last full commit)
+ |reserved |
+ +---------+
+ |pending |
+ |commit |
+ +---------+ <--- tail pointer
+
+ When the first writer commits::
+
+ Buffer page
+ +---------+
+ |written |
+ +---------+
+ |written |
+ +---------+
+ |written |
+ +---------+ <--(last full commit and tail pointer)
+
+
+The commit pointer points to the last write location that was
+committed without preempting another write. When a write that
+preempted another write is committed, it only becomes a pending commit
+and will not be a full commit until all writes have been committed.
+
+The commit page points to the page that has the last full commit.
+The tail page points to the page with the last write (before
+committing).
+
+The tail page is always equal to or after the commit page. It may
+be several pages ahead. If the tail page catches up to the commit
+page then no more writes may take place (regardless of the mode
+of the ring buffer: overwrite and produce/consumer).
+
+The order of pages is::
+
+ head page
+ commit page
+ tail page
+
+Possible scenario::
+
+ tail page
+ head page commit page |
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+There is a special case that the head page is after either the commit page
+and possibly the tail page. That is when the commit (and tail) page has been
+swapped with the reader page. This is because the head page is always
+part of the ring buffer, but the reader page is not. Whenever there
+has been less than a full page that has been committed inside the ring buffer,
+and a reader swaps out a page, it will be swapping out the commit page.
+
+::
+
+ reader page commit page tail page
+ | | |
+ v | |
+ +---+ | |
+ | |<----------+ |
+ | |<------------------------+
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+
+In this case, the head page will not move when the tail and commit
+move back into the ring buffer.
+
+The reader cannot swap a page into the ring buffer if the commit page
+is still on that page. If the read meets the last commit (real commit
+not pending or reserved), then there is nothing more to read.
+The buffer is considered empty until another full commit finishes.
+
+When the tail meets the head page, if the buffer is in overwrite mode,
+the head page will be pushed ahead one. If the buffer is in producer/consumer
+mode, the write will fail.
+
+Overwrite mode::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ head page
+
+Note, the reader page will still point to the previous head page.
+But when a swap takes place, it will use the most recent head page.
+
+
+Making the Ring Buffer Lockless:
+--------------------------------
+
+The main idea behind the lockless algorithm is to combine the moving
+of the head_page pointer with the swapping of pages with the reader.
+State flags are placed inside the pointer to the page. To do this,
+each page must be aligned in memory by 4 bytes. This will allow the 2
+least significant bits of the address to be used as flags, since
+they will always be zero for the address. To get the address,
+simply mask out the flags::
+
+ MASK = ~3
+
+ address & MASK
+
+Two flags will be kept by these two bits:
+
+ HEADER
+ - the page being pointed to is a head page
+
+ UPDATE
+ - the page being pointed to is being updated by a writer
+ and was or is about to be a head page.
+
+::
+
+ reader page
+ |
+ v
+ +---+
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-H->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+The above pointer "-H->" would have the HEADER flag set. That is
+the next page is the next page to be swapped out by the reader.
+This pointer means the next page is the head page.
+
+When the tail page meets the head pointer, it will use cmpxchg to
+change the pointer to the UPDATE state::
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-H->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+"-U->" represents a pointer in the UPDATE state.
+
+Any access to the reader will need to take some sort of lock to serialize
+the readers. But the writers will never take a lock to write to the
+ring buffer. This means we only need to worry about a single reader,
+and writes only preempt in "stack" formation.
+
+When the reader tries to swap the page with the ring buffer, it
+will also use cmpxchg. If the flag bit in the pointer to the
+head page does not have the HEADER flag set, the compare will fail
+and the reader will need to look for the new head page and try again.
+Note, the flags UPDATE and HEADER are never set at the same time.
+
+The reader swaps the reader page as follows::
+
+ +------+
+ |reader| RING BUFFER
+ |page |
+ +------+
+ +---+ +---+ +---+
+ | |--->| |--->| |
+ | |<---| |<---| |
+ +---+ +---+ +---+
+ ^ | ^ |
+ | +---------------+ |
+ +-----H-------------+
+
+The reader sets the reader page next pointer as HEADER to the page after
+the head page::
+
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------H-----------+
+ +------+ v
+ | +---+ +---+ +---+
+ | | |--->| |--->| |
+ | | |<---| |<---| |<-+
+ | +---+ +---+ +---+ |
+ | ^ | ^ | |
+ | | +---------------+ | |
+ | +-----H-------------+ |
+ +--------------------------------------+
+
+It does a cmpxchg with the pointer to the previous head page to make it
+point to the reader page. Note that the new pointer does not have the HEADER
+flag set. This action atomically moves the head page forward::
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------H-----------+
+ +------+ v
+ | ^ +---+ +---+ +---+
+ | | | |-->| |-->| |
+ | | | |<--| |<--| |<-+
+ | | +---+ +---+ +---+ |
+ | | | ^ | |
+ | | +-------------+ | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+After the new head page is set, the previous pointer of the head page is
+updated to the reader page::
+
+ +------+
+ |reader| RING BUFFER
+ |page |-------H-----------+
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | |-->| |-->| |
+ | | | | | |<--| |<-+
+ | | +---+ +---+ +---+ |
+ | | | ^ | |
+ | | +-------------+ | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+ +------+
+ |buffer| RING BUFFER
+ |page |-------H-----------+ <--- New head page
+ +------+ <---------------+ v
+ | ^ +---+ +---+ +---+
+ | | | | | |-->| |
+ | | New | | | |<--| |<-+
+ | | Reader +---+ +---+ +---+ |
+ | | page ----^ | |
+ | | | |
+ | +-----------------------------+ |
+ +------------------------------------+
+
+Another important point: The page that the reader page points back to
+by its previous pointer (the one that now points to the new head page)
+never points back to the reader page. That is because the reader page is
+not part of the ring buffer. Traversing the ring buffer via the next pointers
+will always stay in the ring buffer. Traversing the ring buffer via the
+prev pointers may not.
+
+Note, the way to determine a reader page is simply by examining the previous
+pointer of the page. If the next pointer of the previous page does not
+point back to the original page, then the original page is a reader page::
+
+
+ +--------+
+ | reader | next +----+
+ | page |-------->| |<====== (buffer page)
+ +--------+ +----+
+ | | ^
+ | v | next
+ prev | +----+
+ +------------->| |
+ +----+
+
+The way the head page moves forward:
+
+When the tail page meets the head page and the buffer is in overwrite mode
+and more writes take place, the head page must be moved forward before the
+writer may move the tail page. The way this is done is that the writer
+performs a cmpxchg to convert the pointer to the head page from the HEADER
+flag to have the UPDATE flag set. Once this is done, the reader will
+not be able to swap the head page from the buffer, nor will it be able to
+move the head page, until the writer is finished with the move.
+
+This eliminates any races that the reader can have on the writer. The reader
+must spin, and this is why the reader cannot preempt the writer::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-H->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The following page will be made into the new head page::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+After the new head page has been set, we can set the old head page
+pointer back to NORMAL::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+After the head page has been moved, the tail page may now move forward::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+The above are the trivial updates. Now for the more complex scenarios.
+
+
+As stated before, if enough writes preempt the first write, the
+tail page may make it all the way around the buffer and meet the commit
+page. At this time, we must start dropping writes (usually with some kind
+of warning to the user). But what happens if the commit was still on the
+reader page? The commit page is not part of the ring buffer. The tail page
+must account for this::
+
+
+ reader page commit page
+ | |
+ v |
+ +---+ |
+ | |<----------+
+ | |
+ | |------+
+ +---+ |
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-H->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+ ^
+ |
+ tail page
+
+If the tail page were to simply push the head page forward, the commit when
+leaving the reader page would not be pointing to the correct page.
+
+The solution to this is to test if the commit page is on the reader page
+before pushing the head page. If it is, then it can be assumed that the
+tail page wrapped the buffer, and we must drop new writes.
+
+This is not a race condition, because the commit page can only be moved
+by the outermost writer (the writer that was preempted).
+This means that the commit will not move while a writer is moving the
+tail page. The reader cannot swap the reader page if it is also being
+used as the commit page. The reader can simply check that the commit
+is off the reader page. Once the commit page leaves the reader page
+it will never go back on it unless a reader does another swap with the
+buffer page that is also the commit page.
+
+
+Nested writes
+-------------
+
+In the pushing forward of the tail page we must first push forward
+the head page if the head page is the next page. If the head page
+is not the next page, the tail page is simply updated with a cmpxchg.
+
+Only writers move the tail page. This must be done atomically to protect
+against nested writers::
+
+ temp_page = tail_page
+ next_page = temp_page->next
+ cmpxchg(tail_page, temp_page, next_page)
+
+The above will update the tail page if it is still pointing to the expected
+page. If this fails, a nested write pushed it forward, the current write
+does not need to push it::
+
+
+ temp page
+ |
+ v
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Nested write comes in and moves the tail page forward::
+
+ tail page (moved by nested writer)
+ temp page |
+ | |
+ v v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The above would fail the cmpxchg, but since the tail page has already
+been moved forward, the writer will just try again to reserve storage
+on the new tail page.
+
+But the moving of the head page is a bit more complex::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-H->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The write converts the head page pointer to UPDATE::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+But if a nested writer preempts here, it will see that the next
+page is a head page, but it is also nested. It will detect that
+it is nested and will save that information. The detection is the
+fact that it sees the UPDATE flag instead of a HEADER or NORMAL
+pointer.
+
+The nested writer will set the new head page pointer::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+But it will not reset the update back to normal. Only the writer
+that converted a pointer from HEAD to UPDATE will convert it back
+to NORMAL::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+After the nested writer finishes, the outermost writer will convert
+the UPDATE pointer to NORMAL::
+
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+It can be even more complex if several nested writes came in and moved
+the tail page ahead several pages::
+
+
+ (first writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-H->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The write converts the head page pointer to UPDATE::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Next writer comes in, and sees the update and sets up the new
+head page::
+
+ (second writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The nested writer moves the tail page forward. But does not set the old
+update page to NORMAL because it is not the outermost writer::
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Another writer preempts and sees the page after the tail page is a head page.
+It changes it from HEAD to UPDATE::
+
+ (third writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-U->| |--->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The writer will move the head page forward::
+
+
+ (third writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-U->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+But now that the third writer did change the HEAD flag to UPDATE it
+will convert it to normal::
+
+
+ (third writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+Then it will move the tail page, and return back to the second writer::
+
+
+ (second writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+
+The second writer will fail to move the tail page because it was already
+moved, so it will try again and add its data to the new tail page.
+It will return to the first writer::
+
+
+ (first writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+The first writer cannot know atomically if the tail page moved
+while it updates the HEAD page. It will then update the head page to
+what it thinks is the new head page::
+
+
+ (first writer)
+
+ tail page
+ |
+ v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Since the cmpxchg returns the old value of the pointer the first writer
+will see it succeeded in updating the pointer from NORMAL to HEAD.
+But as we can see, this is not good enough. It must also check to see
+if the tail page is either where it use to be or on the next page::
+
+
+ (first writer)
+
+ A B tail page
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |-H->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+If tail page != A and tail page != B, then it must reset the pointer
+back to NORMAL. The fact that it only needs to worry about nested
+writers means that it only needs to check this after setting the HEAD page::
+
+
+ (first writer)
+
+ A B tail page
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |-U->| |--->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+
+
+Now the writer can update the head page. This is also why the head page must
+remain in UPDATE and only reset by the outermost writer. This prevents
+the reader from seeing the incorrect head page::
+
+
+ (first writer)
+
+ A B tail page
+ | | |
+ v v v
+ +---+ +---+ +---+ +---+
+ <---| |--->| |--->| |--->| |-H->
+ --->| |<---| |<---| |<---| |<---
+ +---+ +---+ +---+ +---+