summaryrefslogtreecommitdiffstats
path: root/Documentation/usb/gadget_printer.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/usb/gadget_printer.rst')
-rw-r--r--Documentation/usb/gadget_printer.rst523
1 files changed, 523 insertions, 0 deletions
diff --git a/Documentation/usb/gadget_printer.rst b/Documentation/usb/gadget_printer.rst
new file mode 100644
index 000000000..5e5516c69
--- /dev/null
+++ b/Documentation/usb/gadget_printer.rst
@@ -0,0 +1,523 @@
+===============================
+Linux USB Printer Gadget Driver
+===============================
+
+06/04/2007
+
+Copyright (C) 2007 Craig W. Nadler <craig@nadler.us>
+
+
+
+General
+=======
+
+This driver may be used if you are writing printer firmware using Linux as
+the embedded OS. This driver has nothing to do with using a printer with
+your Linux host system.
+
+You will need a USB device controller and a Linux driver for it that accepts
+a gadget / "device class" driver using the Linux USB Gadget API. After the
+USB device controller driver is loaded then load the printer gadget driver.
+This will present a printer interface to the USB Host that your USB Device
+port is connected to.
+
+This driver is structured for printer firmware that runs in user mode. The
+user mode printer firmware will read and write data from the kernel mode
+printer gadget driver using a device file. The printer returns a printer status
+byte when the USB HOST sends a device request to get the printer status. The
+user space firmware can read or write this status byte using a device file
+/dev/g_printer . Both blocking and non-blocking read/write calls are supported.
+
+
+
+
+Howto Use This Driver
+=====================
+
+To load the USB device controller driver and the printer gadget driver. The
+following example uses the Netchip 2280 USB device controller driver::
+
+ modprobe net2280
+ modprobe g_printer
+
+
+The follow command line parameter can be used when loading the printer gadget
+(ex: modprobe g_printer idVendor=0x0525 idProduct=0xa4a8 ):
+
+idVendor
+ This is the Vendor ID used in the device descriptor. The default is
+ the Netchip vendor id 0x0525. YOU MUST CHANGE TO YOUR OWN VENDOR ID
+ BEFORE RELEASING A PRODUCT. If you plan to release a product and don't
+ already have a Vendor ID please see www.usb.org for details on how to
+ get one.
+
+idProduct
+ This is the Product ID used in the device descriptor. The default
+ is 0xa4a8, you should change this to an ID that's not used by any of
+ your other USB products if you have any. It would be a good idea to
+ start numbering your products starting with say 0x0001.
+
+bcdDevice
+ This is the version number of your product. It would be a good idea
+ to put your firmware version here.
+
+iManufacturer
+ A string containing the name of the Vendor.
+
+iProduct
+ A string containing the Product Name.
+
+iSerialNum
+ A string containing the Serial Number. This should be changed for
+ each unit of your product.
+
+iPNPstring
+ The PNP ID string used for this printer. You will want to set
+ either on the command line or hard code the PNP ID string used for
+ your printer product.
+
+qlen
+ The number of 8k buffers to use per endpoint. The default is 10, you
+ should tune this for your product. You may also want to tune the
+ size of each buffer for your product.
+
+
+
+
+Using The Example Code
+======================
+
+This example code talks to stdout, instead of a print engine.
+
+To compile the test code below:
+
+1) save it to a file called prn_example.c
+2) compile the code with the follow command::
+
+ gcc prn_example.c -o prn_example
+
+
+
+To read printer data from the host to stdout::
+
+ # prn_example -read_data
+
+
+To write printer data from a file (data_file) to the host::
+
+ # cat data_file | prn_example -write_data
+
+
+To get the current printer status for the gadget driver:::
+
+ # prn_example -get_status
+
+ Printer status is:
+ Printer is NOT Selected
+ Paper is Out
+ Printer OK
+
+
+To set printer to Selected/On-line::
+
+ # prn_example -selected
+
+
+To set printer to Not Selected/Off-line::
+
+ # prn_example -not_selected
+
+
+To set paper status to paper out::
+
+ # prn_example -paper_out
+
+
+To set paper status to paper loaded::
+
+ # prn_example -paper_loaded
+
+
+To set error status to printer OK::
+
+ # prn_example -no_error
+
+
+To set error status to ERROR::
+
+ # prn_example -error
+
+
+
+
+Example Code
+============
+
+::
+
+
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <fcntl.h>
+ #include <linux/poll.h>
+ #include <sys/ioctl.h>
+ #include <linux/usb/g_printer.h>
+
+ #define PRINTER_FILE "/dev/g_printer"
+ #define BUF_SIZE 512
+
+
+ /*
+ * 'usage()' - Show program usage.
+ */
+
+ static void
+ usage(const char *option) /* I - Option string or NULL */
+ {
+ if (option) {
+ fprintf(stderr,"prn_example: Unknown option \"%s\"!\n",
+ option);
+ }
+
+ fputs("\n", stderr);
+ fputs("Usage: prn_example -[options]\n", stderr);
+ fputs("Options:\n", stderr);
+ fputs("\n", stderr);
+ fputs("-get_status Get the current printer status.\n", stderr);
+ fputs("-selected Set the selected status to selected.\n", stderr);
+ fputs("-not_selected Set the selected status to NOT selected.\n",
+ stderr);
+ fputs("-error Set the error status to error.\n", stderr);
+ fputs("-no_error Set the error status to NO error.\n", stderr);
+ fputs("-paper_out Set the paper status to paper out.\n", stderr);
+ fputs("-paper_loaded Set the paper status to paper loaded.\n",
+ stderr);
+ fputs("-read_data Read printer data from driver.\n", stderr);
+ fputs("-write_data Write printer sata to driver.\n", stderr);
+ fputs("-NB_read_data (Non-Blocking) Read printer data from driver.\n",
+ stderr);
+ fputs("\n\n", stderr);
+
+ exit(1);
+ }
+
+
+ static int
+ read_printer_data()
+ {
+ struct pollfd fd[1];
+
+ /* Open device file for printer gadget. */
+ fd[0].fd = open(PRINTER_FILE, O_RDWR);
+ if (fd[0].fd < 0) {
+ printf("Error %d opening %s\n", fd[0].fd, PRINTER_FILE);
+ close(fd[0].fd);
+ return(-1);
+ }
+
+ fd[0].events = POLLIN | POLLRDNORM;
+
+ while (1) {
+ static char buf[BUF_SIZE];
+ int bytes_read;
+ int retval;
+
+ /* Wait for up to 1 second for data. */
+ retval = poll(fd, 1, 1000);
+
+ if (retval && (fd[0].revents & POLLRDNORM)) {
+
+ /* Read data from printer gadget driver. */
+ bytes_read = read(fd[0].fd, buf, BUF_SIZE);
+
+ if (bytes_read < 0) {
+ printf("Error %d reading from %s\n",
+ fd[0].fd, PRINTER_FILE);
+ close(fd[0].fd);
+ return(-1);
+ } else if (bytes_read > 0) {
+ /* Write data to standard OUTPUT (stdout). */
+ fwrite(buf, 1, bytes_read, stdout);
+ fflush(stdout);
+ }
+
+ }
+
+ }
+
+ /* Close the device file. */
+ close(fd[0].fd);
+
+ return 0;
+ }
+
+
+ static int
+ write_printer_data()
+ {
+ struct pollfd fd[1];
+
+ /* Open device file for printer gadget. */
+ fd[0].fd = open (PRINTER_FILE, O_RDWR);
+ if (fd[0].fd < 0) {
+ printf("Error %d opening %s\n", fd[0].fd, PRINTER_FILE);
+ close(fd[0].fd);
+ return(-1);
+ }
+
+ fd[0].events = POLLOUT | POLLWRNORM;
+
+ while (1) {
+ int retval;
+ static char buf[BUF_SIZE];
+ /* Read data from standard INPUT (stdin). */
+ int bytes_read = fread(buf, 1, BUF_SIZE, stdin);
+
+ if (!bytes_read) {
+ break;
+ }
+
+ while (bytes_read) {
+
+ /* Wait for up to 1 second to sent data. */
+ retval = poll(fd, 1, 1000);
+
+ /* Write data to printer gadget driver. */
+ if (retval && (fd[0].revents & POLLWRNORM)) {
+ retval = write(fd[0].fd, buf, bytes_read);
+ if (retval < 0) {
+ printf("Error %d writing to %s\n",
+ fd[0].fd,
+ PRINTER_FILE);
+ close(fd[0].fd);
+ return(-1);
+ } else {
+ bytes_read -= retval;
+ }
+
+ }
+
+ }
+
+ }
+
+ /* Wait until the data has been sent. */
+ fsync(fd[0].fd);
+
+ /* Close the device file. */
+ close(fd[0].fd);
+
+ return 0;
+ }
+
+
+ static int
+ read_NB_printer_data()
+ {
+ int fd;
+ static char buf[BUF_SIZE];
+ int bytes_read;
+
+ /* Open device file for printer gadget. */
+ fd = open(PRINTER_FILE, O_RDWR|O_NONBLOCK);
+ if (fd < 0) {
+ printf("Error %d opening %s\n", fd, PRINTER_FILE);
+ close(fd);
+ return(-1);
+ }
+
+ while (1) {
+ /* Read data from printer gadget driver. */
+ bytes_read = read(fd, buf, BUF_SIZE);
+ if (bytes_read <= 0) {
+ break;
+ }
+
+ /* Write data to standard OUTPUT (stdout). */
+ fwrite(buf, 1, bytes_read, stdout);
+ fflush(stdout);
+ }
+
+ /* Close the device file. */
+ close(fd);
+
+ return 0;
+ }
+
+
+ static int
+ get_printer_status()
+ {
+ int retval;
+ int fd;
+
+ /* Open device file for printer gadget. */
+ fd = open(PRINTER_FILE, O_RDWR);
+ if (fd < 0) {
+ printf("Error %d opening %s\n", fd, PRINTER_FILE);
+ close(fd);
+ return(-1);
+ }
+
+ /* Make the IOCTL call. */
+ retval = ioctl(fd, GADGET_GET_PRINTER_STATUS);
+ if (retval < 0) {
+ fprintf(stderr, "ERROR: Failed to set printer status\n");
+ return(-1);
+ }
+
+ /* Close the device file. */
+ close(fd);
+
+ return(retval);
+ }
+
+
+ static int
+ set_printer_status(unsigned char buf, int clear_printer_status_bit)
+ {
+ int retval;
+ int fd;
+
+ retval = get_printer_status();
+ if (retval < 0) {
+ fprintf(stderr, "ERROR: Failed to get printer status\n");
+ return(-1);
+ }
+
+ /* Open device file for printer gadget. */
+ fd = open(PRINTER_FILE, O_RDWR);
+
+ if (fd < 0) {
+ printf("Error %d opening %s\n", fd, PRINTER_FILE);
+ close(fd);
+ return(-1);
+ }
+
+ if (clear_printer_status_bit) {
+ retval &= ~buf;
+ } else {
+ retval |= buf;
+ }
+
+ /* Make the IOCTL call. */
+ if (ioctl(fd, GADGET_SET_PRINTER_STATUS, (unsigned char)retval)) {
+ fprintf(stderr, "ERROR: Failed to set printer status\n");
+ return(-1);
+ }
+
+ /* Close the device file. */
+ close(fd);
+
+ return 0;
+ }
+
+
+ static int
+ display_printer_status()
+ {
+ char printer_status;
+
+ printer_status = get_printer_status();
+ if (printer_status < 0) {
+ fprintf(stderr, "ERROR: Failed to get printer status\n");
+ return(-1);
+ }
+
+ printf("Printer status is:\n");
+ if (printer_status & PRINTER_SELECTED) {
+ printf(" Printer is Selected\n");
+ } else {
+ printf(" Printer is NOT Selected\n");
+ }
+ if (printer_status & PRINTER_PAPER_EMPTY) {
+ printf(" Paper is Out\n");
+ } else {
+ printf(" Paper is Loaded\n");
+ }
+ if (printer_status & PRINTER_NOT_ERROR) {
+ printf(" Printer OK\n");
+ } else {
+ printf(" Printer ERROR\n");
+ }
+
+ return(0);
+ }
+
+
+ int
+ main(int argc, char *argv[])
+ {
+ int i; /* Looping var */
+ int retval = 0;
+
+ /* No Args */
+ if (argc == 1) {
+ usage(0);
+ exit(0);
+ }
+
+ for (i = 1; i < argc && !retval; i ++) {
+
+ if (argv[i][0] != '-') {
+ continue;
+ }
+
+ if (!strcmp(argv[i], "-get_status")) {
+ if (display_printer_status()) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-paper_loaded")) {
+ if (set_printer_status(PRINTER_PAPER_EMPTY, 1)) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-paper_out")) {
+ if (set_printer_status(PRINTER_PAPER_EMPTY, 0)) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-selected")) {
+ if (set_printer_status(PRINTER_SELECTED, 0)) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-not_selected")) {
+ if (set_printer_status(PRINTER_SELECTED, 1)) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-error")) {
+ if (set_printer_status(PRINTER_NOT_ERROR, 1)) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-no_error")) {
+ if (set_printer_status(PRINTER_NOT_ERROR, 0)) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-read_data")) {
+ if (read_printer_data()) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-write_data")) {
+ if (write_printer_data()) {
+ retval = 1;
+ }
+
+ } else if (!strcmp(argv[i], "-NB_read_data")) {
+ if (read_NB_printer_data()) {
+ retval = 1;
+ }
+
+ } else {
+ usage(argv[i]);
+ retval = 1;
+ }
+ }
+
+ exit(retval);
+ }