summaryrefslogtreecommitdiffstats
path: root/Documentation/userspace-api/media/rc
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/userspace-api/media/rc/keytable.c.rst176
-rw-r--r--Documentation/userspace-api/media/rc/lirc-dev-intro.rst164
-rw-r--r--Documentation/userspace-api/media/rc/lirc-dev.rst14
-rw-r--r--Documentation/userspace-api/media/rc/lirc-func.rst27
-rw-r--r--Documentation/userspace-api/media/rc/lirc-get-features.rst192
-rw-r--r--Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst69
-rw-r--r--Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst47
-rw-r--r--Documentation/userspace-api/media/rc/lirc-get-send-mode.rst71
-rw-r--r--Documentation/userspace-api/media/rc/lirc-get-timeout.rst57
-rw-r--r--Documentation/userspace-api/media/rc/lirc-header.rst10
-rw-r--r--Documentation/userspace-api/media/rc/lirc-read.rst65
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst46
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst49
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst46
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst49
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst55
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst41
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst47
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst51
-rw-r--r--Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst56
-rw-r--r--Documentation/userspace-api/media/rc/lirc-write.rst72
-rw-r--r--Documentation/userspace-api/media/rc/rc-intro.rst24
-rw-r--r--Documentation/userspace-api/media/rc/rc-protos.rst454
-rw-r--r--Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst144
-rw-r--r--Documentation/userspace-api/media/rc/rc-table-change.rst18
-rw-r--r--Documentation/userspace-api/media/rc/rc-tables.rst759
-rw-r--r--Documentation/userspace-api/media/rc/remote_controllers.rst51
27 files changed, 2854 insertions, 0 deletions
diff --git a/Documentation/userspace-api/media/rc/keytable.c.rst b/Documentation/userspace-api/media/rc/keytable.c.rst
new file mode 100644
index 000000000..0b50cfaf2
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/keytable.c.rst
@@ -0,0 +1,176 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+file: uapi/v4l/keytable.c
+=========================
+
+.. code-block:: c
+
+ /* keytable.c - This program allows checking/replacing keys at IR
+
+ Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@kernel.org>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+ */
+
+ #include <ctype.h>
+ #include <errno.h>
+ #include <fcntl.h>
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
+ #include <linux/input.h>
+ #include <sys/ioctl.h>
+
+ #include "parse.h"
+
+ void prtcode (int *codes)
+ {
+ struct parse_key *p;
+
+ for (p=keynames;p->name!=NULL;p++) {
+ if (p->value == (unsigned)codes[1]) {
+ printf("scancode 0x%04x = %s (0x%02x)\\n", codes[0], p->name, codes[1]);
+ return;
+ }
+ }
+
+ if (isprint (codes[1]))
+ printf("scancode %d = '%c' (0x%02x)\\n", codes[0], codes[1], codes[1]);
+ else
+ printf("scancode %d = 0x%02x\\n", codes[0], codes[1]);
+ }
+
+ int parse_code(char *string)
+ {
+ struct parse_key *p;
+
+ for (p=keynames;p->name!=NULL;p++) {
+ if (!strcasecmp(p->name, string)) {
+ return p->value;
+ }
+ }
+ return -1;
+ }
+
+ int main (int argc, char *argv[])
+ {
+ int fd;
+ unsigned int i, j;
+ int codes[2];
+
+ if (argc<2 || argc>4) {
+ printf ("usage: %s <device> to get table; or\\n"
+ " %s <device> <scancode> <keycode>\\n"
+ " %s <device> <keycode_file>n",*argv,*argv,*argv);
+ return -1;
+ }
+
+ if ((fd = open(argv[1], O_RDONLY)) < 0) {
+ perror("Couldn't open input device");
+ return(-1);
+ }
+
+ if (argc==4) {
+ int value;
+
+ value=parse_code(argv[3]);
+
+ if (value==-1) {
+ value = strtol(argv[3], NULL, 0);
+ if (errno)
+ perror("value");
+ }
+
+ codes [0] = (unsigned) strtol(argv[2], NULL, 0);
+ codes [1] = (unsigned) value;
+
+ if(ioctl(fd, EVIOCSKEYCODE, codes))
+ perror ("EVIOCSKEYCODE");
+
+ if(ioctl(fd, EVIOCGKEYCODE, codes)==0)
+ prtcode(codes);
+ return 0;
+ }
+
+ if (argc==3) {
+ FILE *fin;
+ int value;
+ char *scancode, *keycode, s[2048];
+
+ fin=fopen(argv[2],"r");
+ if (fin==NULL) {
+ perror ("opening keycode file");
+ return -1;
+ }
+
+ /* Clears old table */
+ for (j = 0; j < 256; j++) {
+ for (i = 0; i < 256; i++) {
+ codes[0] = (j << 8) | i;
+ codes[1] = KEY_RESERVED;
+ ioctl(fd, EVIOCSKEYCODE, codes);
+ }
+ }
+
+ while (fgets(s,sizeof(s),fin)) {
+ scancode=strtok(s,"\\n\\t =:");
+ if (!scancode) {
+ perror ("parsing input file scancode");
+ return -1;
+ }
+ if (!strcasecmp(scancode, "scancode")) {
+ scancode = strtok(NULL,"\\n\\t =:");
+ if (!scancode) {
+ perror ("parsing input file scancode");
+ return -1;
+ }
+ }
+
+ keycode=strtok(NULL,"\\n\\t =:(");
+ if (!keycode) {
+ perror ("parsing input file keycode");
+ return -1;
+ }
+
+ // printf ("parsing %s=%s:", scancode, keycode);
+ value=parse_code(keycode);
+ // printf ("\\tvalue=%d\\n",value);
+
+ if (value==-1) {
+ value = strtol(keycode, NULL, 0);
+ if (errno)
+ perror("value");
+ }
+
+ codes [0] = (unsigned) strtol(scancode, NULL, 0);
+ codes [1] = (unsigned) value;
+
+ // printf("\\t%04x=%04x\\n",codes[0], codes[1]);
+ if(ioctl(fd, EVIOCSKEYCODE, codes)) {
+ fprintf(stderr, "Setting scancode 0x%04x with 0x%04x via ",codes[0], codes[1]);
+ perror ("EVIOCSKEYCODE");
+ }
+
+ if(ioctl(fd, EVIOCGKEYCODE, codes)==0)
+ prtcode(codes);
+ }
+ return 0;
+ }
+
+ /* Get scancode table */
+ for (j = 0; j < 256; j++) {
+ for (i = 0; i < 256; i++) {
+ codes[0] = (j << 8) | i;
+ if (!ioctl(fd, EVIOCGKEYCODE, codes) && codes[1] != KEY_RESERVED)
+ prtcode(codes);
+ }
+ }
+ return 0;
+ }
diff --git a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
new file mode 100644
index 000000000..167b354bf
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst
@@ -0,0 +1,164 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _lirc_dev_intro:
+
+************
+Introduction
+************
+
+LIRC stands for Linux Infrared Remote Control. The LIRC device interface is
+a bi-directional interface for transporting raw IR and decoded scancodes
+data between userspace and kernelspace. Fundamentally, it is just a chardev
+(/dev/lircX, for X = 0, 1, 2, ...), with a number of standard struct
+file_operations defined on it. With respect to transporting raw IR and
+decoded scancodes to and fro, the essential fops are read, write and ioctl.
+
+It is also possible to attach a BPF program to a LIRC device for decoding
+raw IR into scancodes.
+
+Example dmesg output upon a driver registering w/LIRC:
+
+.. code-block:: none
+
+ $ dmesg |grep lirc_dev
+ rc rc0: lirc_dev: driver mceusb registered at minor = 0, raw IR receiver, raw IR transmitter
+
+What you should see for a chardev:
+
+.. code-block:: none
+
+ $ ls -l /dev/lirc*
+ crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0
+
+Note that the package `v4l-utils <https://git.linuxtv.org/v4l-utils.git/>`_
+contains tools for working with LIRC devices:
+
+ - ir-ctl: can receive raw IR and transmit IR, as well as query LIRC
+ device features.
+
+ - ir-keytable: can load keymaps; allows you to set IR kernel protocols; load
+ BPF IR decoders and test IR decoding. Some BPF IR decoders are also
+ provided.
+
+.. _lirc_modes:
+
+**********
+LIRC modes
+**********
+
+LIRC supports some modes of receiving and sending IR codes, as shown
+on the following table.
+
+.. _lirc-mode-scancode:
+.. _lirc-scancode-flag-toggle:
+.. _lirc-scancode-flag-repeat:
+
+``LIRC_MODE_SCANCODE``
+
+ This mode is for both sending and receiving IR.
+
+ For transmitting (aka sending), create a ``struct lirc_scancode`` with
+ the desired scancode set in the ``scancode`` member, :c:type:`rc_proto`
+ set to the :ref:`IR protocol <Remote_controllers_Protocols>`, and all other
+ members set to 0. Write this struct to the lirc device.
+
+ For receiving, you read ``struct lirc_scancode`` from the LIRC device.
+ The ``scancode`` field is set to the received scancode and the
+ :ref:`IR protocol <Remote_controllers_Protocols>` is set in
+ :c:type:`rc_proto`. If the scancode maps to a valid key code, this is set
+ in the ``keycode`` field, else it is set to ``KEY_RESERVED``.
+
+ The ``flags`` can have ``LIRC_SCANCODE_FLAG_TOGGLE`` set if the toggle
+ bit is set in protocols that support it (e.g. rc-5 and rc-6), or
+ ``LIRC_SCANCODE_FLAG_REPEAT`` for when a repeat is received for protocols
+ that support it (e.g. nec).
+
+ In the Sanyo and NEC protocol, if you hold a button on remote, rather than
+ repeating the entire scancode, the remote sends a shorter message with
+ no scancode, which just means button is held, a "repeat". When this is
+ received, the ``LIRC_SCANCODE_FLAG_REPEAT`` is set and the scancode and
+ keycode is repeated.
+
+ With nec, there is no way to distinguish "button hold" from "repeatedly
+ pressing the same button". The rc-5 and rc-6 protocols have a toggle bit.
+ When a button is released and pressed again, the toggle bit is inverted.
+ If the toggle bit is set, the ``LIRC_SCANCODE_FLAG_TOGGLE`` is set.
+
+ The ``timestamp`` field is filled with the time nanoseconds
+ (in ``CLOCK_MONOTONIC``) when the scancode was decoded.
+
+.. _lirc-mode-mode2:
+
+``LIRC_MODE_MODE2``
+
+ The driver returns a sequence of pulse and space codes to userspace,
+ as a series of u32 values.
+
+ This mode is used only for IR receive.
+
+ The upper 8 bits determine the packet type, and the lower 24 bits
+ the payload. Use ``LIRC_VALUE()`` macro to get the payload, and
+ the macro ``LIRC_MODE2()`` will give you the type, which
+ is one of:
+
+ ``LIRC_MODE2_PULSE``
+
+ Signifies the presence of IR in microseconds.
+
+ ``LIRC_MODE2_SPACE``
+
+ Signifies absence of IR in microseconds.
+
+ ``LIRC_MODE2_FREQUENCY``
+
+ If measurement of the carrier frequency was enabled with
+ :ref:`lirc_set_measure_carrier_mode` then this packet gives you
+ the carrier frequency in Hertz.
+
+ ``LIRC_MODE2_TIMEOUT``
+
+ If timeout reports are enabled with
+ :ref:`lirc_set_rec_timeout_reports`, when the timeout set with
+ :ref:`lirc_set_rec_timeout` expires due to no IR being detected,
+ this packet will be sent, with the number of microseconds with
+ no IR.
+
+.. _lirc-mode-pulse:
+
+``LIRC_MODE_PULSE``
+
+ In pulse mode, a sequence of pulse/space integer values are written to the
+ lirc device using :ref:`lirc-write`.
+
+ The values are alternating pulse and space lengths, in microseconds. The
+ first and last entry must be a pulse, so there must be an odd number
+ of entries.
+
+ This mode is used only for IR send.
+
+********************
+BPF based IR decoder
+********************
+
+The kernel has support for decoding the most common
+:ref:`IR protocols <Remote_controllers_Protocols>`, but there
+are many protocols which are not supported. To support these, it is possible
+to load an BPF program which does the decoding. This can only be done on
+LIRC devices which support reading raw IR.
+
+First, using the `bpf(2)`_ syscall with the ``BPF_LOAD_PROG`` argument,
+program must be loaded of type ``BPF_PROG_TYPE_LIRC_MODE2``. Once attached
+to the LIRC device, this program will be called for each pulse, space or
+timeout event on the LIRC device. The context for the BPF program is a
+pointer to a unsigned int, which is a :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`
+value. When the program has decoded the scancode, it can be submitted using
+the BPF functions ``bpf_rc_keydown()`` or ``bpf_rc_repeat()``. Mouse or pointer
+movements can be reported using ``bpf_rc_pointer_rel()``.
+
+Once you have the file descriptor for the ``BPF_PROG_TYPE_LIRC_MODE2`` BPF
+program, it can be attached to the LIRC device using the `bpf(2)`_ syscall.
+The target must be the file descriptor for the LIRC device, and the
+attach type must be ``BPF_LIRC_MODE2``. No more than 64 BPF programs can be
+attached to a single LIRC device at a time.
+
+.. _bpf(2): http://man7.org/linux/man-pages/man2/bpf.2.html
diff --git a/Documentation/userspace-api/media/rc/lirc-dev.rst b/Documentation/userspace-api/media/rc/lirc-dev.rst
new file mode 100644
index 000000000..5510dc02a
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-dev.rst
@@ -0,0 +1,14 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _lirc_dev:
+
+LIRC Device Interface
+=====================
+
+
+.. toctree::
+ :maxdepth: 1
+
+ lirc-dev-intro
+ lirc-func
+ lirc-header
diff --git a/Documentation/userspace-api/media/rc/lirc-func.rst b/Documentation/userspace-api/media/rc/lirc-func.rst
new file mode 100644
index 000000000..420a3dbf0
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-func.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _lirc_func:
+
+LIRC Function Reference
+=======================
+
+
+.. toctree::
+ :maxdepth: 1
+
+ lirc-read
+ lirc-write
+ lirc-get-features
+ lirc-get-send-mode
+ lirc-get-rec-mode
+ lirc-get-rec-resolution
+ lirc-set-send-duty-cycle
+ lirc-get-timeout
+ lirc-set-rec-timeout
+ lirc-set-rec-carrier
+ lirc-set-rec-carrier-range
+ lirc-set-send-carrier
+ lirc-set-transmitter-mask
+ lirc-set-rec-timeout-reports
+ lirc-set-measure-carrier-mode
+ lirc-set-wideband-receiver
diff --git a/Documentation/userspace-api/media/rc/lirc-get-features.rst b/Documentation/userspace-api/media/rc/lirc-get-features.rst
new file mode 100644
index 000000000..66a243dbd
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-features.rst
@@ -0,0 +1,192 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_get_features:
+
+***********************
+ioctl LIRC_GET_FEATURES
+***********************
+
+Name
+====
+
+LIRC_GET_FEATURES - Get the underlying hardware device's features
+
+Synopsis
+========
+
+.. c:macro:: LIRC_GET_FEATURES
+
+``int ioctl(int fd, LIRC_GET_FEATURES, __u32 *features)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``features``
+ Bitmask with the LIRC features.
+
+Description
+===========
+
+Get the underlying hardware device's features. If a driver does not
+announce support of certain features, calling of the corresponding ioctls
+is undefined.
+
+LIRC features
+=============
+
+.. _LIRC-CAN-REC-RAW:
+
+``LIRC_CAN_REC_RAW``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-REC-PULSE:
+
+``LIRC_CAN_REC_PULSE``
+
+ Unused. Kept just to avoid breaking uAPI.
+ :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` can only be used for transmitting.
+
+.. _LIRC-CAN-REC-MODE2:
+
+``LIRC_CAN_REC_MODE2``
+
+ This is raw IR driver for receiving. This means that
+ :ref:`LIRC_MODE_MODE2 <lirc-mode-MODE2>` is used. This also implies
+ that :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is also supported,
+ as long as the kernel is recent enough. Use the
+ :ref:`lirc_set_rec_mode` to switch modes.
+
+.. _LIRC-CAN-REC-LIRCCODE:
+
+``LIRC_CAN_REC_LIRCCODE``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-REC-SCANCODE:
+
+``LIRC_CAN_REC_SCANCODE``
+
+ This is a scancode driver for receiving. This means that
+ :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is used.
+
+.. _LIRC-CAN-SET-SEND-CARRIER:
+
+``LIRC_CAN_SET_SEND_CARRIER``
+
+ The driver supports changing the modulation frequency via
+ :ref:`ioctl LIRC_SET_SEND_CARRIER <LIRC_SET_SEND_CARRIER>`.
+
+.. _LIRC-CAN-SET-SEND-DUTY-CYCLE:
+
+``LIRC_CAN_SET_SEND_DUTY_CYCLE``
+
+ The driver supports changing the duty cycle using
+ :ref:`ioctl LIRC_SET_SEND_DUTY_CYCLE <LIRC_SET_SEND_DUTY_CYCLE>`.
+
+.. _LIRC-CAN-SET-TRANSMITTER-MASK:
+
+``LIRC_CAN_SET_TRANSMITTER_MASK``
+
+ The driver supports changing the active transmitter(s) using
+ :ref:`ioctl LIRC_SET_TRANSMITTER_MASK <LIRC_SET_TRANSMITTER_MASK>`.
+
+.. _LIRC-CAN-SET-REC-CARRIER:
+
+``LIRC_CAN_SET_REC_CARRIER``
+
+ The driver supports setting the receive carrier frequency using
+ :ref:`ioctl LIRC_SET_REC_CARRIER <LIRC_SET_REC_CARRIER>`.
+
+.. _LIRC-CAN-SET-REC-DUTY-CYCLE-RANGE:
+
+``LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-SET-REC-CARRIER-RANGE:
+
+``LIRC_CAN_SET_REC_CARRIER_RANGE``
+
+ The driver supports
+ :ref:`ioctl LIRC_SET_REC_CARRIER_RANGE <LIRC_SET_REC_CARRIER_RANGE>`.
+
+.. _LIRC-CAN-GET-REC-RESOLUTION:
+
+``LIRC_CAN_GET_REC_RESOLUTION``
+
+ The driver supports
+ :ref:`ioctl LIRC_GET_REC_RESOLUTION <LIRC_GET_REC_RESOLUTION>`.
+
+.. _LIRC-CAN-SET-REC-TIMEOUT:
+
+``LIRC_CAN_SET_REC_TIMEOUT``
+
+ The driver supports
+ :ref:`ioctl LIRC_SET_REC_TIMEOUT <LIRC_SET_REC_TIMEOUT>`.
+
+.. _LIRC-CAN-SET-REC-FILTER:
+
+``LIRC_CAN_SET_REC_FILTER``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-MEASURE-CARRIER:
+
+``LIRC_CAN_MEASURE_CARRIER``
+
+ The driver supports measuring of the modulation frequency using
+ :ref:`ioctl LIRC_SET_MEASURE_CARRIER_MODE <LIRC_SET_MEASURE_CARRIER_MODE>`.
+
+.. _LIRC-CAN-USE-WIDEBAND-RECEIVER:
+
+``LIRC_CAN_USE_WIDEBAND_RECEIVER``
+
+ The driver supports learning mode using
+ :ref:`ioctl LIRC_SET_WIDEBAND_RECEIVER <LIRC_SET_WIDEBAND_RECEIVER>`.
+
+.. _LIRC-CAN-NOTIFY-DECODE:
+
+``LIRC_CAN_NOTIFY_DECODE``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-SEND-RAW:
+
+``LIRC_CAN_SEND_RAW``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+.. _LIRC-CAN-SEND-PULSE:
+
+``LIRC_CAN_SEND_PULSE``
+
+ The driver supports sending (also called as IR blasting or IR TX) using
+ :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>`. This implies that
+ :ref:`LIRC_MODE_SCANCODE <lirc-mode-SCANCODE>` is also supported for
+ transmit, as long as the kernel is recent enough. Use the
+ :ref:`lirc_set_send_mode` to switch modes.
+
+.. _LIRC-CAN-SEND-MODE2:
+
+``LIRC_CAN_SEND_MODE2``
+
+ Unused. Kept just to avoid breaking uAPI.
+ :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` can only be used for receiving.
+
+.. _LIRC-CAN-SEND-LIRCCODE:
+
+``LIRC_CAN_SEND_LIRCCODE``
+
+ Unused. Kept just to avoid breaking uAPI.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
new file mode 100644
index 000000000..188478ed1
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-rec-mode.rst
@@ -0,0 +1,69 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_get_rec_mode:
+.. _lirc_set_rec_mode:
+
+**********************************************
+ioctls LIRC_GET_REC_MODE and LIRC_SET_REC_MODE
+**********************************************
+
+Name
+====
+
+LIRC_GET_REC_MODE/LIRC_SET_REC_MODE - Get/set current receive mode.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_GET_REC_MODE
+
+``int ioctl(int fd, LIRC_GET_REC_MODE, __u32 *mode)``
+
+.. c:macro:: LIRC_SET_REC_MODE
+
+``int ioctl(int fd, LIRC_SET_REC_MODE, __u32 *mode)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``mode``
+ Mode used for receive.
+
+Description
+===========
+
+Get and set the current receive mode. Only
+:ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` and
+:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported.
+Use :ref:`lirc_get_features` to find out which modes the driver supports.
+
+Return Value
+============
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - .. row 1
+
+ - ``ENODEV``
+
+ - Device not available.
+
+ - .. row 2
+
+ - ``ENOTTY``
+
+ - Device does not support receiving.
+
+ - .. row 3
+
+ - ``EINVAL``
+
+ - Invalid mode or invalid mode for this device.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
new file mode 100644
index 000000000..e29445c5c
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-rec-resolution.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_get_rec_resolution:
+
+*****************************
+ioctl LIRC_GET_REC_RESOLUTION
+*****************************
+
+Name
+====
+
+LIRC_GET_REC_RESOLUTION - Obtain the value of receive resolution, in microseconds.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_GET_REC_RESOLUTION
+
+``int ioctl(int fd, LIRC_GET_REC_RESOLUTION, __u32 *microseconds)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``microseconds``
+ Resolution, in microseconds.
+
+Description
+===========
+
+Some receivers have maximum resolution which is defined by internal
+sample rate or data format limitations. E.g. it's common that
+signals can only be reported in 50 microsecond steps.
+
+This ioctl returns the integer value with such resolution, with can be
+used by userspace applications like lircd to automatically adjust the
+tolerance value.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
new file mode 100644
index 000000000..77472fb56
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-send-mode.rst
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_get_send_mode:
+.. _lirc_set_send_mode:
+
+************************************************
+ioctls LIRC_GET_SEND_MODE and LIRC_SET_SEND_MODE
+************************************************
+
+Name
+====
+
+LIRC_GET_SEND_MODE/LIRC_SET_SEND_MODE - Get/set current transmit mode.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_GET_SEND_MODE
+
+``int ioctl(int fd, LIRC_GET_SEND_MODE, __u32 *mode)``
+
+.. c:macro:: LIRC_SET_SEND_MODE
+
+``int ioctl(int fd, LIRC_SET_SEND_MODE, __u32 *mode)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``mode``
+ The mode used for transmitting.
+
+Description
+===========
+
+Get/set current transmit mode.
+
+Only :ref:`LIRC_MODE_PULSE <lirc-mode-pulse>` and
+:ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` are supported by for IR send,
+depending on the driver. Use :ref:`lirc_get_features` to find out which
+modes the driver supports.
+
+Return Value
+============
+
+.. tabularcolumns:: |p{2.5cm}|p{15.0cm}|
+
+.. flat-table::
+ :header-rows: 0
+ :stub-columns: 0
+
+ - .. row 1
+
+ - ``ENODEV``
+
+ - Device not available.
+
+ - .. row 2
+
+ - ``ENOTTY``
+
+ - Device does not support transmitting.
+
+ - .. row 3
+
+ - ``EINVAL``
+
+ - Invalid mode or invalid mode for this device.
diff --git a/Documentation/userspace-api/media/rc/lirc-get-timeout.rst b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
new file mode 100644
index 000000000..f5f3e06d6
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-get-timeout.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_get_min_timeout:
+.. _lirc_get_max_timeout:
+
+****************************************************
+ioctls LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT
+****************************************************
+
+Name
+====
+
+LIRC_GET_MIN_TIMEOUT / LIRC_GET_MAX_TIMEOUT - Obtain the possible timeout
+range for IR receive.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_GET_MIN_TIMEOUT
+
+``int ioctl(int fd, LIRC_GET_MIN_TIMEOUT, __u32 *timeout)``
+
+.. c:macro:: LIRC_GET_MAX_TIMEOUT
+
+``int ioctl(int fd, LIRC_GET_MAX_TIMEOUT, __u32 *timeout)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``timeout``
+ Timeout, in microseconds.
+
+Description
+===========
+
+Some devices have internal timers that can be used to detect when
+there's no IR activity for a long time. This can help lircd in
+detecting that a IR signal is finished and can speed up the decoding
+process. Returns an integer value with the minimum/maximum timeout
+that can be set.
+
+.. note::
+
+ Some devices have a fixed timeout, in that case
+ both ioctls will return the same value even though the timeout
+ cannot be changed via :ref:`LIRC_SET_REC_TIMEOUT`.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-header.rst b/Documentation/userspace-api/media/rc/lirc-header.rst
new file mode 100644
index 000000000..8bd0acc99
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-header.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _lirc_header:
+
+****************
+LIRC Header File
+****************
+
+.. kernel-include:: $BUILDDIR/lirc.h.rst
+
diff --git a/Documentation/userspace-api/media/rc/lirc-read.rst b/Documentation/userspace-api/media/rc/lirc-read.rst
new file mode 100644
index 000000000..d58956021
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-read.rst
@@ -0,0 +1,65 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc-read:
+
+***********
+LIRC read()
+***********
+
+Name
+====
+
+lirc-read - Read from a LIRC device
+
+Synopsis
+========
+
+.. code-block:: c
+
+ #include <unistd.h>
+
+.. c:function:: ssize_t read( int fd, void *buf, size_t count )
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by ``open()``.
+
+``buf``
+ Buffer to be filled
+
+``count``
+ Max number of bytes to read
+
+Description
+===========
+
+:c:func:`read()` attempts to read up to ``count`` bytes from file
+descriptor ``fd`` into the buffer starting at ``buf``. If ``count`` is zero,
+:c:func:`read()` returns zero and has no other results. If ``count``
+is greater than ``SSIZE_MAX``, the result is unspecified.
+
+The exact format of the data depends on what :ref:`lirc_modes` a driver
+uses. Use :ref:`lirc_get_features` to get the supported mode, and use
+:ref:`lirc_set_rec_mode` set the current active mode.
+
+The mode :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>` is for raw IR,
+in which packets containing an unsigned int value describing an IR signal are
+read from the chardev.
+
+Alternatively, :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` can be available,
+in this mode scancodes which are either decoded by software decoders, or
+by hardware decoders. The :c:type:`rc_proto` member is set to the
+:ref:`IR protocol <Remote_controllers_Protocols>`
+used for transmission, and ``scancode`` to the decoded scancode,
+and the ``keycode`` set to the keycode or ``KEY_RESERVED``.
+
+Return Value
+============
+
+On success, the number of bytes read is returned. It is not an error if
+this number is smaller than the number of bytes requested, or the amount
+of data required for one frame. On error, -1 is returned, and the ``errno``
+variable is set appropriately.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
new file mode 100644
index 000000000..9bf9811a9
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-measure-carrier-mode.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_measure_carrier_mode:
+
+***********************************
+ioctl LIRC_SET_MEASURE_CARRIER_MODE
+***********************************
+
+Name
+====
+
+LIRC_SET_MEASURE_CARRIER_MODE - enable or disable measure mode
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_MEASURE_CARRIER_MODE
+
+``int ioctl(int fd, LIRC_SET_MEASURE_CARRIER_MODE, __u32 *enable)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``enable``
+ enable = 1 means enable measure mode, enable = 0 means disable measure
+ mode.
+
+Description
+===========
+
+.. _lirc-mode2-frequency:
+
+Enable or disable measure mode. If enabled, from the next key
+press on, the driver will send ``LIRC_MODE2_FREQUENCY`` packets. By
+default this should be turned off.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
new file mode 100644
index 000000000..530bc2239
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier-range.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_rec_carrier_range:
+
+********************************
+ioctl LIRC_SET_REC_CARRIER_RANGE
+********************************
+
+Name
+====
+
+LIRC_SET_REC_CARRIER_RANGE - Set lower bound of the carrier used to modulate
+IR receive.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_REC_CARRIER_RANGE
+
+``int ioctl(int fd, LIRC_SET_REC_CARRIER_RANGE, __u32 *frequency)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``frequency``
+ Frequency of the carrier that modulates PWM data, in Hz.
+
+Description
+===========
+
+This ioctl sets the upper range of carrier frequency that will be recognized
+by the IR receiver.
+
+.. note::
+
+ To set a range use :ref:`LIRC_SET_REC_CARRIER_RANGE
+ <LIRC_SET_REC_CARRIER_RANGE>` with the lower bound first and later call
+ :ref:`LIRC_SET_REC_CARRIER <LIRC_SET_REC_CARRIER>` with the upper bound.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
new file mode 100644
index 000000000..28c928f1c
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-carrier.rst
@@ -0,0 +1,46 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_rec_carrier:
+
+**************************
+ioctl LIRC_SET_REC_CARRIER
+**************************
+
+Name
+====
+
+LIRC_SET_REC_CARRIER - Set carrier used to modulate IR receive.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_REC_CARRIER
+
+``int ioctl(int fd, LIRC_SET_REC_CARRIER, __u32 *frequency)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``frequency``
+ Frequency of the carrier that modulates PWM data, in Hz.
+
+Description
+===========
+
+Set receive carrier used to modulate IR PWM pulses and spaces.
+
+.. note::
+
+ If called together with :ref:`LIRC_SET_REC_CARRIER_RANGE`, this ioctl
+ sets the upper bound frequency that will be recognized by the device.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
new file mode 100644
index 000000000..83e7155c5
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout-reports.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_rec_timeout_reports:
+
+**********************************
+ioctl LIRC_SET_REC_TIMEOUT_REPORTS
+**********************************
+
+Name
+====
+
+LIRC_SET_REC_TIMEOUT_REPORTS - enable or disable timeout reports for IR receive
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_REC_TIMEOUT_REPORTS
+
+``int ioctl(int fd, LIRC_SET_REC_TIMEOUT_REPORTS, __u32 *enable)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``enable``
+ enable = 1 means enable timeout report, enable = 0 means disable timeout
+ reports.
+
+Description
+===========
+
+.. _lirc-mode2-timeout:
+
+Enable or disable timeout reports for IR receive. By default, timeout reports
+should be turned off.
+
+.. note::
+
+ This ioctl is only valid for :ref:`LIRC_MODE_MODE2 <lirc-mode-mode2>`.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
new file mode 100644
index 000000000..8f3f9adf5
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-rec-timeout.rst
@@ -0,0 +1,55 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_rec_timeout:
+.. _lirc_get_rec_timeout:
+
+***************************************************
+ioctl LIRC_GET_REC_TIMEOUT and LIRC_SET_REC_TIMEOUT
+***************************************************
+
+Name
+====
+
+LIRC_GET_REC_TIMEOUT/LIRC_SET_REC_TIMEOUT - Get/set the integer value for IR inactivity timeout.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_GET_REC_TIMEOUT
+
+``int ioctl(int fd, LIRC_GET_REC_TIMEOUT, __u32 *timeout)``
+
+.. c:macro:: LIRC_SET_REC_TIMEOUT
+
+``int ioctl(int fd, LIRC_SET_REC_TIMEOUT, __u32 *timeout)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``timeout``
+ Timeout, in microseconds.
+
+Description
+===========
+
+Get and set the integer value for IR inactivity timeout.
+
+If supported by the hardware, setting it to 0 disables all hardware timeouts
+and data should be reported as soon as possible. If the exact value
+cannot be set, then the next possible value _greater_ than the
+given value should be set.
+
+.. note::
+
+ The range of supported timeout is given by :ref:`LIRC_GET_MIN_TIMEOUT`.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
new file mode 100644
index 000000000..e3810ba58
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-send-carrier.rst
@@ -0,0 +1,41 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_send_carrier:
+
+***************************
+ioctl LIRC_SET_SEND_CARRIER
+***************************
+
+Name
+====
+
+LIRC_SET_SEND_CARRIER - Set send carrier used to modulate IR TX.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_SEND_CARRIER
+
+``int ioctl(int fd, LIRC_SET_SEND_CARRIER, __u32 *frequency)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``frequency``
+ Frequency of the carrier to be modulated, in Hz.
+
+Description
+===========
+
+Set send carrier used to modulate IR PWM pulses and spaces.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
new file mode 100644
index 000000000..52a072529
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-send-duty-cycle.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_send_duty_cycle:
+
+******************************
+ioctl LIRC_SET_SEND_DUTY_CYCLE
+******************************
+
+Name
+====
+
+LIRC_SET_SEND_DUTY_CYCLE - Set the duty cycle of the carrier signal for
+IR transmit.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_SEND_DUTY_CYCLE
+
+``int ioctl(int fd, LIRC_SET_SEND_DUTY_CYCLE, __u32 *duty_cycle)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``duty_cycle``
+ Duty cicle, describing the pulse width in percent (from 1 to 99) of
+ the total cycle. Values 0 and 100 are reserved.
+
+Description
+===========
+
+Get/set the duty cycle of the carrier signal for IR transmit.
+
+Currently, no special meaning is defined for 0 or 100, but this
+could be used to switch off carrier generation in the future, so
+these values should be reserved.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
new file mode 100644
index 000000000..68f4cc2e3
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-transmitter-mask.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_transmitter_mask:
+
+*******************************
+ioctl LIRC_SET_TRANSMITTER_MASK
+*******************************
+
+Name
+====
+
+LIRC_SET_TRANSMITTER_MASK - Enables send codes on a given set of transmitters
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_TRANSMITTER_MASK
+
+``int ioctl(int fd, LIRC_SET_TRANSMITTER_MASK, __u32 *mask)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``mask``
+ Mask with channels to enable tx. Channel 0 is the least significant bit.
+
+Description
+===========
+
+Some IR TX devices have multiple output channels, in such case,
+:ref:`LIRC_CAN_SET_TRANSMITTER_MASK <LIRC-CAN-SET-TRANSMITTER-MASK>` is
+returned via :ref:`LIRC_GET_FEATURES` and this ioctl sets what channels will
+send IR codes.
+
+This ioctl enables the given set of transmitters. The first transmitter is
+encoded by the least significant bit and so on.
+
+When an invalid bit mask is given, i.e. a bit is set, even though the device
+does not have so many transitters, then this ioctl returns the number of
+available transitters and does nothing otherwise.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
new file mode 100644
index 000000000..be5321c4a
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-set-wideband-receiver.rst
@@ -0,0 +1,56 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc_set_wideband_receiver:
+
+********************************
+ioctl LIRC_SET_WIDEBAND_RECEIVER
+********************************
+
+Name
+====
+
+LIRC_SET_WIDEBAND_RECEIVER - enable wide band receiver.
+
+Synopsis
+========
+
+.. c:macro:: LIRC_SET_WIDEBAND_RECEIVER
+
+``int ioctl(int fd, LIRC_SET_WIDEBAND_RECEIVER, __u32 *enable)``
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``enable``
+ enable = 1 means enable wideband receiver, enable = 0 means disable
+ wideband receiver.
+
+Description
+===========
+
+Some receivers are equipped with special wide band receiver which is
+intended to be used to learn output of existing remote. This ioctl
+allows enabling or disabling it.
+
+This might be useful of receivers that have otherwise narrow band receiver
+that prevents them to be used with some remotes. Wide band receiver might
+also be more precise. On the other hand its disadvantage it usually
+reduced range of reception.
+
+.. note::
+
+ Wide band receiver might be implictly enabled if you enable
+ carrier reports. In that case it will be disabled as soon as you disable
+ carrier reports. Trying to disable wide band receiver while carrier
+ reports are active will do nothing.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/lirc-write.rst b/Documentation/userspace-api/media/rc/lirc-write.rst
new file mode 100644
index 000000000..c1c3230d4
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/lirc-write.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: RC
+
+.. _lirc-write:
+
+************
+LIRC write()
+************
+
+Name
+====
+
+lirc-write - Write to a LIRC device
+
+Synopsis
+========
+
+.. code-block:: c
+
+ #include <unistd.h>
+
+.. c:function:: ssize_t write( int fd, void *buf, size_t count )
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by ``open()``.
+
+``buf``
+ Buffer with data to be written
+
+``count``
+ Number of bytes at the buffer
+
+Description
+===========
+
+:c:func:`write()` writes up to ``count`` bytes to the device
+referenced by the file descriptor ``fd`` from the buffer starting at
+``buf``.
+
+The exact format of the data depends on what mode a driver is in, use
+:ref:`lirc_get_features` to get the supported modes and use
+:ref:`lirc_set_send_mode` set the mode.
+
+When in :ref:`LIRC_MODE_PULSE <lirc-mode-PULSE>` mode, the data written to
+the chardev is a pulse/space sequence of integer values. Pulses and spaces
+are only marked implicitly by their position. The data must start and end
+with a pulse, therefore, the data must always include an uneven number of
+samples. The write function blocks until the data has been transmitted
+by the hardware. If more data is provided than the hardware can send, the
+driver returns ``EINVAL``.
+
+When in :ref:`LIRC_MODE_SCANCODE <lirc-mode-scancode>` mode, one
+``struct lirc_scancode`` must be written to the chardev at a time, else
+``EINVAL`` is returned. Set the desired scancode in the ``scancode`` member,
+and the :ref:`IR protocol <Remote_controllers_Protocols>` in the
+:c:type:`rc_proto`: member. All other members must be
+set to 0, else ``EINVAL`` is returned. If there is no protocol encoder
+for the protocol or the scancode is not valid for the specified protocol,
+``EINVAL`` is returned. The write function blocks until the scancode
+is transmitted by the hardware.
+
+Return Value
+============
+
+On success, the number of bytes written is returned. It is not an error if
+this number is smaller than the number of bytes requested, or the amount
+of data required for one frame. On error, -1 is returned, and the ``errno``
+variable is set appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/userspace-api/media/rc/rc-intro.rst b/Documentation/userspace-api/media/rc/rc-intro.rst
new file mode 100644
index 000000000..1338478e2
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-intro.rst
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _Remote_controllers_Intro:
+
+************
+Introduction
+************
+
+Currently, most analog and digital devices have a Infrared input for
+remote controllers. Each manufacturer has their own type of control. It
+is not rare for the same manufacturer to ship different types of
+controls, depending on the device.
+
+A Remote Controller interface is mapped as a normal evdev/input
+interface, just like a keyboard or a mouse. So, it uses all ioctls
+already defined for any other input devices.
+
+However, remove controllers are more flexible than a normal input
+device, as the IR receiver (and/or transmitter) can be used in
+conjunction with a wide variety of different IR remotes.
+
+In order to allow flexibility, the Remote Controller subsystem allows
+controlling the RC-specific attributes via
+:ref:`the sysfs class nodes <remote_controllers_sysfs_nodes>`.
diff --git a/Documentation/userspace-api/media/rc/rc-protos.rst b/Documentation/userspace-api/media/rc/rc-protos.rst
new file mode 100644
index 000000000..2e290584a
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-protos.rst
@@ -0,0 +1,454 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _Remote_controllers_Protocols:
+
+*****************************************
+Remote Controller Protocols and Scancodes
+*****************************************
+
+IR is encoded as a series of pulses and spaces, using a protocol. These
+protocols can encode e.g. an address (which device should respond) and a
+command: what it should do. The values for these are not always consistent
+across different devices for a given protocol.
+
+Therefore out the output of the IR decoder is a scancode; a single u32
+value. Using keymap tables this can be mapped to linux key codes.
+
+Other things can be encoded too. Some IR protocols encode a toggle bit; this
+is to distinguish whether the same button is being held down, or has been
+released and pressed again. If has been released and pressed again, the
+toggle bit will invert from one IR message to the next.
+
+Some remotes have a pointer-type device which can used to control the
+mouse; some air conditioning systems can have their target temperature
+target set in IR.
+
+The following are the protocols the kernel knows about and also lists
+how scancodes are encoded for each protocol.
+
+rc-5 (RC_PROTO_RC5)
+-------------------
+
+This IR protocol uses manchester encoding to encode 14 bits. There is a
+detailed description here https://www.sbprojects.net/knowledge/ir/rc5.php.
+
+The scancode encoding is *not* consistent with the lirc daemon (lircd) rc5
+protocol, or the manchester BPF decoder.
+
+.. flat-table:: rc5 bits scancode mapping
+ :widths: 1 1 2
+
+ * - rc-5 bit
+
+ - scancode bit
+
+ - description
+
+ * - 1
+
+ - none
+
+ - Start bit, always set
+
+ * - 1
+
+ - 6 (inverted)
+
+ - 2nd start bit in rc5, re-used as 6th command bit
+
+ * - 1
+
+ - none
+
+ - Toggle bit
+
+ * - 5
+
+ - 8 to 13
+
+ - Address
+
+ * - 6
+
+ - 0 to 5
+
+ - Command
+
+There is a variant of rc5 called either rc5x or extended rc5
+where there the second stop bit is the 6th commmand bit, but inverted.
+This is done so it the scancodes and encoding is compatible with existing
+schemes. This bit is stored in bit 6 of the scancode, inverted. This is
+done to keep it compatible with plain rc-5 where there are two start bits.
+
+rc-5-sz (RC_PROTO_RC5_SZ)
+-------------------------
+This is much like rc-5 but one bit longer. The scancode is encoded
+differently.
+
+.. flat-table:: rc-5-sz bits scancode mapping
+ :widths: 1 1 2
+
+ * - rc-5-sz bits
+
+ - scancode bit
+
+ - description
+
+ * - 1
+
+ - none
+
+ - Start bit, always set
+
+ * - 1
+
+ - 13
+
+ - Address bit
+
+ * - 1
+
+ - none
+
+ - Toggle bit
+
+ * - 6
+
+ - 6 to 11
+
+ - Address
+
+ * - 6
+
+ - 0 to 5
+
+ - Command
+
+rc-5x-20 (RC_PROTO_RC5X_20)
+---------------------------
+
+This rc-5 extended to encoded 20 bits. The is a 3555 microseconds space
+after the 8th bit.
+
+.. flat-table:: rc-5x-20 bits scancode mapping
+ :widths: 1 1 2
+
+ * - rc-5-sz bits
+
+ - scancode bit
+
+ - description
+
+ * - 1
+
+ - none
+
+ - Start bit, always set
+
+ * - 1
+
+ - 14
+
+ - Address bit
+
+ * - 1
+
+ - none
+
+ - Toggle bit
+
+ * - 5
+
+ - 16 to 20
+
+ - Address
+
+ * - 6
+
+ - 8 to 13
+
+ - Address
+
+ * - 6
+
+ - 0 to 5
+
+ - Command
+
+
+jvc (RC_PROTO_JVC)
+------------------
+
+The jvc protocol is much like nec, without the inverted values. It is
+described here https://www.sbprojects.net/knowledge/ir/jvc.php.
+
+The scancode is a 16 bits value, where the address is the lower 8 bits
+and the command the higher 8 bits; this is reversed from IR order.
+
+sony-12 (RC_PROTO_SONY12)
+-------------------------
+
+The sony protocol is a pulse-width encoding. There are three variants,
+which just differ in number of bits and scancode encoding.
+
+.. flat-table:: sony-12 bits scancode mapping
+ :widths: 1 1 2
+
+ * - sony-12 bits
+
+ - scancode bit
+
+ - description
+
+ * - 5
+
+ - 16 to 20
+
+ - device
+
+ * - 7
+
+ - 0 to 6
+
+ - function
+
+sony-15 (RC_PROTO_SONY15)
+-------------------------
+
+The sony protocol is a pulse-width encoding. There are three variants,
+which just differ in number of bits and scancode encoding.
+
+.. flat-table:: sony-12 bits scancode mapping
+ :widths: 1 1 2
+
+ * - sony-12 bits
+
+ - scancode bit
+
+ - description
+
+ * - 8
+
+ - 16 to 23
+
+ - device
+
+ * - 7
+
+ - 0 to 6
+
+ - function
+
+sony-20 (RC_PROTO_SONY20)
+-------------------------
+
+The sony protocol is a pulse-width encoding. There are three variants,
+which just differ in number of bits and scancode encoding.
+
+.. flat-table:: sony-20 bits scancode mapping
+ :widths: 1 1 2
+
+ * - sony-20 bits
+
+ - scancode bit
+
+ - description
+
+ * - 5
+
+ - 16 to 20
+
+ - device
+
+ * - 7
+
+ - 0 to 7
+
+ - device
+
+ * - 8
+
+ - 8 to 15
+
+ - extended bits
+
+nec (RC_PROTO_NEC)
+------------------
+
+The nec protocol encodes an 8 bit address and an 8 bit command. It is
+described here https://www.sbprojects.net/knowledge/ir/nec.php. Note
+that the protocol sends least significant bit first.
+
+As a check, the nec protocol sends the address and command twice; the
+second time it is inverted. This is done for verification.
+
+A plain nec IR message has 16 bits; the high 8 bits are the address
+and the low 8 bits are the command.
+
+nec-x (RC_PROTO_NECX)
+---------------------
+
+Extended nec has a 16 bit address and a 8 bit command. This is encoded
+as a 24 bit value as you would expect, with the lower 8 bits the command
+and the upper 16 bits the address.
+
+nec-32 (RC_PROTO_NEC32)
+-----------------------
+
+nec-32 does not send an inverted address or an inverted command; the
+entire message, all 32 bits, are used.
+
+For this to be decoded correctly, the second 8 bits must not be the
+inverted value of the first, and also the last 8 bits must not be the
+inverted value of the third 8 bit value.
+
+The scancode has a somewhat unusual encoding.
+
+.. flat-table:: nec-32 bits scancode mapping
+
+ * - nec-32 bits
+
+ - scancode bit
+
+ * - First 8 bits
+
+ - 16 to 23
+
+ * - Second 8 bits
+
+ - 24 to 31
+
+ * - Third 8 bits
+
+ - 0 to 7
+
+ * - Fourth 8 bits
+
+ - 8 to 15
+
+sanyo (RC_PROTO_SANYO)
+----------------------
+
+The sanyo protocol is like the nec protocol, but with 13 bits address
+rather than 8 bits. Both the address and the command are followed by
+their inverted versions, but these are not present in the scancodes.
+
+Bis 8 to 20 of the scancode is the 13 bits address, and the lower 8
+bits are the command.
+
+mcir2-kbd (RC_PROTO_MCIR2_KBD)
+------------------------------
+
+This protocol is generated by the Microsoft MCE keyboard for keyboard
+events. Refer to the ir-mce_kbd-decoder.c to see how it is encoded.
+
+mcir2-mse (RC_PROTO_MCIR2_MSE)
+------------------------------
+
+This protocol is generated by the Microsoft MCE keyboard for pointer
+events. Refer to the ir-mce_kbd-decoder.c to see how it is encoded.
+
+rc-6-0 (RC_PROTO_RC6_0)
+-----------------------
+
+This is the rc-6 in mode 0. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The scancode is the exact 16 bits as in the protocol. There is also a
+toggle bit.
+
+rc-6-6a-20 (RC_PROTO_RC6_6A_20)
+-------------------------------
+
+This is the rc-6 in mode 6a, 20 bits. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The scancode is the exact 20 bits
+as in the protocol. There is also a toggle bit.
+
+rc-6-6a-24 (RC_PROTO_RC6_6A_24)
+-------------------------------
+
+This is the rc-6 in mode 6a, 24 bits. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The scancode is the exact 24 bits
+as in the protocol. There is also a toggle bit.
+
+rc-6-6a-32 (RC_PROTO_RC6_6A_32)
+-------------------------------
+
+This is the rc-6 in mode 6a, 32 bits. rc-6 is described here
+https://www.sbprojects.net/knowledge/ir/rc6.php.
+The upper 16 bits are the vendor,
+and the lower 16 bits are the vendor-specific bits. This protocol is
+for the non-Microsoft MCE variant (vendor != 0x800f).
+
+
+rc-6-mce (RC_PROTO_RC6_MCE)
+---------------------------
+
+This is the rc-6 in mode 6a, 32 bits. The upper 16 bits are the vendor,
+and the lower 16 bits are the vendor-specific bits. This protocol is
+for the Microsoft MCE variant (vendor = 0x800f). The toggle bit in the
+protocol itself is ignored, and the 16th bit should be takes as the toggle
+bit.
+
+sharp (RC_PROTO_SHARP)
+----------------------
+
+This is a protocol used by Sharp VCRs, is described here
+https://www.sbprojects.net/knowledge/ir/sharp.php. There is a very long
+(40ms) space between the normal and inverted values, and some IR receivers
+cannot decode this.
+
+There is a 5 bit address and a 8 bit command. In the scancode the address is
+in bits 8 to 12, and the command in bits 0 to 7.
+
+xmp (RC_PROTO_XMP)
+------------------
+
+This protocol has several versions and only version 1 is supported. Refer
+to the decoder (ir-xmp-decoder.c) to see how it is encoded.
+
+
+cec (RC_PROTO_CEC)
+------------------
+
+This is not an IR protocol, this is a protocol over CEC. The CEC
+infrastructure uses rc-core for handling CEC commands, so that they
+can easily be remapped.
+
+imon (RC_PROTO_IMON)
+--------------------
+
+This protocol is used by Antec Veris/SoundGraph iMON remotes.
+
+The protocol
+describes both button presses and pointer movements. The protocol encodes
+31 bits, and the scancode is simply the 31 bits with the top bit always 0.
+
+rc-mm-12 (RC_PROTO_RCMM12)
+--------------------------
+
+The rc-mm protocol is described here
+https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
+the 12 bits.
+
+rc-mm-24 (RC_PROTO_RCMM24)
+--------------------------
+
+The rc-mm protocol is described here
+https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
+the 24 bits.
+
+rc-mm-32 (RC_PROTO_RCMM32)
+--------------------------
+
+The rc-mm protocol is described here
+https://www.sbprojects.net/knowledge/ir/rcmm.php. The scancode is simply
+the 32 bits.
+
+xbox-dvd (RC_PROTO_XBOX_DVD)
+----------------------------
+
+This protocol is used by XBox DVD Remote, which was made for the original
+XBox. There is no in-kernel decoder or encoder for this protocol. The usb
+device decodes the protocol. There is a BPF decoder available in v4l-utils.
diff --git a/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
new file mode 100644
index 000000000..43c442696
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-sysfs-nodes.rst
@@ -0,0 +1,144 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _remote_controllers_sysfs_nodes:
+
+*******************************
+Remote Controller's sysfs nodes
+*******************************
+
+As defined at ``Documentation/ABI/testing/sysfs-class-rc``, those are
+the sysfs nodes that control the Remote Controllers:
+
+
+.. _sys_class_rc:
+
+/sys/class/rc/
+==============
+
+The ``/sys/class/rc/`` class sub-directory belongs to the Remote
+Controller core and provides a sysfs interface for configuring infrared
+remote controller receivers.
+
+
+.. _sys_class_rc_rcN:
+
+/sys/class/rc/rcN/
+==================
+
+A ``/sys/class/rc/rcN`` directory is created for each remote control
+receiver device where N is the number of the receiver.
+
+
+.. _sys_class_rc_rcN_protocols:
+
+/sys/class/rc/rcN/protocols
+===========================
+
+Reading this file returns a list of available protocols, something like::
+
+ rc5 [rc6] nec jvc [sony]
+
+Enabled protocols are shown in [] brackets.
+
+Writing "+proto" will add a protocol to the list of enabled protocols.
+
+Writing "-proto" will remove a protocol from the list of enabled
+protocols.
+
+Writing "proto" will enable only "proto".
+
+Writing "none" will disable all protocols.
+
+Write fails with ``EINVAL`` if an invalid protocol combination or unknown
+protocol name is used.
+
+
+.. _sys_class_rc_rcN_filter:
+
+/sys/class/rc/rcN/filter
+========================
+
+Sets the scancode filter expected value.
+
+Use in combination with ``/sys/class/rc/rcN/filter_mask`` to set the
+expected value of the bits set in the filter mask. If the hardware
+supports it then scancodes which do not match the filter will be
+ignored. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the current protocol is altered.
+
+
+.. _sys_class_rc_rcN_filter_mask:
+
+/sys/class/rc/rcN/filter_mask
+=============================
+
+Sets the scancode filter mask of bits to compare. Use in combination
+with ``/sys/class/rc/rcN/filter`` to set the bits of the scancode which
+should be compared against the expected value. A value of 0 disables the
+filter to allow all valid scancodes to be processed.
+
+If the hardware supports it then scancodes which do not match the filter
+will be ignored. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the current protocol is altered.
+
+
+.. _sys_class_rc_rcN_wakeup_protocols:
+
+/sys/class/rc/rcN/wakeup_protocols
+==================================
+
+Reading this file returns a list of available protocols to use for the
+wakeup filter, something like::
+
+ rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce
+
+Note that protocol variants are listed, so ``nec``, ``sony``, ``rc-5``, ``rc-6``
+have their different bit length encodings listed if available.
+
+Note that all protocol variants are listed.
+
+The enabled wakeup protocol is shown in [] brackets.
+
+Only one protocol can be selected at a time.
+
+Writing "proto" will use "proto" for wakeup events.
+
+Writing "none" will disable wakeup.
+
+Write fails with ``EINVAL`` if an invalid protocol combination or unknown
+protocol name is used, or if wakeup is not supported by the hardware.
+
+
+.. _sys_class_rc_rcN_wakeup_filter:
+
+/sys/class/rc/rcN/wakeup_filter
+===============================
+
+Sets the scancode wakeup filter expected value. Use in combination with
+``/sys/class/rc/rcN/wakeup_filter_mask`` to set the expected value of
+the bits set in the wakeup filter mask to trigger a system wake event.
+
+If the hardware supports it and wakeup_filter_mask is not 0 then
+scancodes which match the filter will wake the system from e.g. suspend
+to RAM or power off. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the wakeup protocol is altered.
+
+
+.. _sys_class_rc_rcN_wakeup_filter_mask:
+
+/sys/class/rc/rcN/wakeup_filter_mask
+====================================
+
+Sets the scancode wakeup filter mask of bits to compare. Use in
+combination with ``/sys/class/rc/rcN/wakeup_filter`` to set the bits of
+the scancode which should be compared against the expected value to
+trigger a system wake event.
+
+If the hardware supports it and wakeup_filter_mask is not 0 then
+scancodes which match the filter will wake the system from e.g. suspend
+to RAM or power off. Otherwise the write will fail with an error.
+
+This value may be reset to 0 if the wakeup protocol is altered.
diff --git a/Documentation/userspace-api/media/rc/rc-table-change.rst b/Documentation/userspace-api/media/rc/rc-table-change.rst
new file mode 100644
index 000000000..61c77b080
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-table-change.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _Remote_controllers_table_change:
+
+*******************************************
+Changing default Remote Controller mappings
+*******************************************
+
+The event interface provides two ioctls to be used against the
+/dev/input/event device, to allow changing the default keymapping.
+
+This program demonstrates how to replace the keymap tables.
+
+
+.. toctree::
+ :maxdepth: 1
+
+ keytable.c
diff --git a/Documentation/userspace-api/media/rc/rc-tables.rst b/Documentation/userspace-api/media/rc/rc-tables.rst
new file mode 100644
index 000000000..8dc11657f
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/rc-tables.rst
@@ -0,0 +1,759 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+
+.. _Remote_controllers_tables:
+
+************************
+Remote controller tables
+************************
+
+Unfortunately, for several years, there was no effort to create uniform
+IR keycodes for different devices. This caused the same IR keyname to be
+mapped completely differently on different IR devices. This resulted
+that the same IR keyname to be mapped completely different on different
+IR's. Due to that, V4L2 API now specifies a standard for mapping Media
+keys on IR.
+
+This standard should be used by both V4L/DVB drivers and userspace
+applications
+
+The modules register the remote as keyboard within the linux input
+layer. This means that the IR key strokes will look like normal keyboard
+key strokes (if CONFIG_INPUT_KEYBOARD is enabled). Using the event
+devices (CONFIG_INPUT_EVDEV) it is possible for applications to access
+the remote via /dev/input/event devices.
+
+
+.. _rc_standard_keymap:
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.7cm}|
+
+.. flat-table:: IR default keymapping
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 2
+
+
+ - .. row 1
+
+ - Key code
+
+ - Meaning
+
+ - Key examples on IR
+
+ - .. row 2
+
+ - **Numeric keys**
+
+ - .. row 3
+
+ - ``KEY_NUMERIC_0``
+
+ - Keyboard digit 0
+
+ - 0
+
+ - .. row 4
+
+ - ``KEY_NUMERIC_1``
+
+ - Keyboard digit 1
+
+ - 1
+
+ - .. row 5
+
+ - ``KEY_NUMERIC_2``
+
+ - Keyboard digit 2
+
+ - 2
+
+ - .. row 6
+
+ - ``KEY_NUMERIC_3``
+
+ - Keyboard digit 3
+
+ - 3
+
+ - .. row 7
+
+ - ``KEY_NUMERIC_4``
+
+ - Keyboard digit 4
+
+ - 4
+
+ - .. row 8
+
+ - ``KEY_NUMERIC_5``
+
+ - Keyboard digit 5
+
+ - 5
+
+ - .. row 9
+
+ - ``KEY_NUMERIC_6``
+
+ - Keyboard digit 6
+
+ - 6
+
+ - .. row 10
+
+ - ``KEY_NUMERIC_7``
+
+ - Keyboard digit 7
+
+ - 7
+
+ - .. row 11
+
+ - ``KEY_NUMERIC_8``
+
+ - Keyboard digit 8
+
+ - 8
+
+ - .. row 12
+
+ - ``KEY_NUMERIC_9``
+
+ - Keyboard digit 9
+
+ - 9
+
+ - .. row 13
+
+ - **Movie play control**
+
+ - .. row 14
+
+ - ``KEY_FORWARD``
+
+ - Instantly advance in time
+
+ - >> / FORWARD
+
+ - .. row 15
+
+ - ``KEY_BACK``
+
+ - Instantly go back in time
+
+ - <<< / BACK
+
+ - .. row 16
+
+ - ``KEY_FASTFORWARD``
+
+ - Play movie faster
+
+ - >>> / FORWARD
+
+ - .. row 17
+
+ - ``KEY_REWIND``
+
+ - Play movie back
+
+ - REWIND / BACKWARD
+
+ - .. row 18
+
+ - ``KEY_NEXT``
+
+ - Select next chapter / sub-chapter / interval
+
+ - NEXT / SKIP
+
+ - .. row 19
+
+ - ``KEY_PREVIOUS``
+
+ - Select previous chapter / sub-chapter / interval
+
+ - << / PREV / PREVIOUS
+
+ - .. row 20
+
+ - ``KEY_AGAIN``
+
+ - Repeat the video or a video interval
+
+ - REPEAT / LOOP / RECALL
+
+ - .. row 21
+
+ - ``KEY_PAUSE``
+
+ - Pause stream
+
+ - PAUSE / FREEZE
+
+ - .. row 22
+
+ - ``KEY_PLAY``
+
+ - Play movie at the normal timeshift
+
+ - NORMAL TIMESHIFT / LIVE / >
+
+ - .. row 23
+
+ - ``KEY_PLAYPAUSE``
+
+ - Alternate between play and pause
+
+ - PLAY / PAUSE
+
+ - .. row 24
+
+ - ``KEY_STOP``
+
+ - Stop stream
+
+ - STOP
+
+ - .. row 25
+
+ - ``KEY_RECORD``
+
+ - Start/stop recording stream
+
+ - CAPTURE / REC / RECORD/PAUSE
+
+ - .. row 26
+
+ - ``KEY_CAMERA``
+
+ - Take a picture of the image
+
+ - CAMERA ICON / CAPTURE / SNAPSHOT
+
+ - .. row 27
+
+ - ``KEY_SHUFFLE``
+
+ - Enable shuffle mode
+
+ - SHUFFLE
+
+ - .. row 28
+
+ - ``KEY_TIME``
+
+ - Activate time shift mode
+
+ - TIME SHIFT
+
+ - .. row 29
+
+ - ``KEY_TITLE``
+
+ - Allow changing the chapter
+
+ - CHAPTER
+
+ - .. row 30
+
+ - ``KEY_SUBTITLE``
+
+ - Allow changing the subtitle
+
+ - SUBTITLE
+
+ - .. row 31
+
+ - **Image control**
+
+ - .. row 32
+
+ - ``KEY_BRIGHTNESSDOWN``
+
+ - Decrease Brightness
+
+ - BRIGHTNESS DECREASE
+
+ - .. row 33
+
+ - ``KEY_BRIGHTNESSUP``
+
+ - Increase Brightness
+
+ - BRIGHTNESS INCREASE
+
+ - .. row 34
+
+ - ``KEY_ANGLE``
+
+ - Switch video camera angle (on videos with more than one angle
+ stored)
+
+ - ANGLE / SWAP
+
+ - .. row 35
+
+ - ``KEY_EPG``
+
+ - Open the Elecrowonic Play Guide (EPG)
+
+ - EPG / GUIDE
+
+ - .. row 36
+
+ - ``KEY_TEXT``
+
+ - Activate/change closed caption mode
+
+ - CLOSED CAPTION/TELETEXT / DVD TEXT / TELETEXT / TTX
+
+ - .. row 37
+
+ - **Audio control**
+
+ - .. row 38
+
+ - ``KEY_AUDIO``
+
+ - Change audio source
+
+ - AUDIO SOURCE / AUDIO / MUSIC
+
+ - .. row 39
+
+ - ``KEY_MUTE``
+
+ - Mute/unmute audio
+
+ - MUTE / DEMUTE / UNMUTE
+
+ - .. row 40
+
+ - ``KEY_VOLUMEDOWN``
+
+ - Decrease volume
+
+ - VOLUME- / VOLUME DOWN
+
+ - .. row 41
+
+ - ``KEY_VOLUMEUP``
+
+ - Increase volume
+
+ - VOLUME+ / VOLUME UP
+
+ - .. row 42
+
+ - ``KEY_MODE``
+
+ - Change sound mode
+
+ - MONO/STEREO
+
+ - .. row 43
+
+ - ``KEY_LANGUAGE``
+
+ - Select Language
+
+ - 1ST / 2ND LANGUAGE / DVD LANG / MTS/SAP / MTS SEL
+
+ - .. row 44
+
+ - **Channel control**
+
+ - .. row 45
+
+ - ``KEY_CHANNEL``
+
+ - Go to the next favorite channel
+
+ - ALT / CHANNEL / CH SURFING / SURF / FAV
+
+ - .. row 46
+
+ - ``KEY_CHANNELDOWN``
+
+ - Decrease channel sequentially
+
+ - CHANNEL - / CHANNEL DOWN / DOWN
+
+ - .. row 47
+
+ - ``KEY_CHANNELUP``
+
+ - Increase channel sequentially
+
+ - CHANNEL + / CHANNEL UP / UP
+
+ - .. row 48
+
+ - ``KEY_DIGITS``
+
+ - Use more than one digit for channel
+
+ - PLUS / 100/ 1xx / xxx / -/-- / Single Double Triple Digit
+
+ - .. row 49
+
+ - ``KEY_SEARCH``
+
+ - Start channel autoscan
+
+ - SCAN / AUTOSCAN
+
+ - .. row 50
+
+ - **Colored keys**
+
+ - .. row 51
+
+ - ``KEY_BLUE``
+
+ - IR Blue key
+
+ - BLUE
+
+ - .. row 52
+
+ - ``KEY_GREEN``
+
+ - IR Green Key
+
+ - GREEN
+
+ - .. row 53
+
+ - ``KEY_RED``
+
+ - IR Red key
+
+ - RED
+
+ - .. row 54
+
+ - ``KEY_YELLOW``
+
+ - IR Yellow key
+
+ - YELLOW
+
+ - .. row 55
+
+ - **Media selection**
+
+ - .. row 56
+
+ - ``KEY_CD``
+
+ - Change input source to Compact Disc
+
+ - CD
+
+ - .. row 57
+
+ - ``KEY_DVD``
+
+ - Change input to DVD
+
+ - DVD / DVD MENU
+
+ - .. row 58
+
+ - ``KEY_EJECTCLOSECD``
+
+ - Open/close the CD/DVD player
+
+ - -> ) / CLOSE / OPEN
+
+ - .. row 59
+
+ - ``KEY_MEDIA``
+
+ - Turn on/off Media application
+
+ - PC/TV / TURN ON/OFF APP
+
+ - .. row 60
+
+ - ``KEY_PC``
+
+ - Selects from TV to PC
+
+ - PC
+
+ - .. row 61
+
+ - ``KEY_RADIO``
+
+ - Put into AM/FM radio mode
+
+ - RADIO / TV/FM / TV/RADIO / FM / FM/RADIO
+
+ - .. row 62
+
+ - ``KEY_TV``
+
+ - Select tv mode
+
+ - TV / LIVE TV
+
+ - .. row 63
+
+ - ``KEY_TV2``
+
+ - Select Cable mode
+
+ - AIR/CBL
+
+ - .. row 64
+
+ - ``KEY_VCR``
+
+ - Select VCR mode
+
+ - VCR MODE / DTR
+
+ - .. row 65
+
+ - ``KEY_VIDEO``
+
+ - Alternate between input modes
+
+ - SOURCE / SELECT / DISPLAY / SWITCH INPUTS / VIDEO
+
+ - .. row 66
+
+ - **Power control**
+
+ - .. row 67
+
+ - ``KEY_POWER``
+
+ - Turn on/off computer
+
+ - SYSTEM POWER / COMPUTER POWER
+
+ - .. row 68
+
+ - ``KEY_POWER2``
+
+ - Turn on/off application
+
+ - TV ON/OFF / POWER
+
+ - .. row 69
+
+ - ``KEY_SLEEP``
+
+ - Activate sleep timer
+
+ - SLEEP / SLEEP TIMER
+
+ - .. row 70
+
+ - ``KEY_SUSPEND``
+
+ - Put computer into suspend mode
+
+ - STANDBY / SUSPEND
+
+ - .. row 71
+
+ - **Window control**
+
+ - .. row 72
+
+ - ``KEY_CLEAR``
+
+ - Stop stream and return to default input video/audio
+
+ - CLEAR / RESET / BOSS KEY
+
+ - .. row 73
+
+ - ``KEY_CYCLEWINDOWS``
+
+ - Minimize windows and move to the next one
+
+ - ALT-TAB / MINIMIZE / DESKTOP
+
+ - .. row 74
+
+ - ``KEY_FAVORITES``
+
+ - Open the favorites stream window
+
+ - TV WALL / Favorites
+
+ - .. row 75
+
+ - ``KEY_MENU``
+
+ - Call application menu
+
+ - 2ND CONTROLS (USA: MENU) / DVD/MENU / SHOW/HIDE CTRL
+
+ - .. row 76
+
+ - ``KEY_NEW``
+
+ - Open/Close Picture in Picture
+
+ - PIP
+
+ - .. row 77
+
+ - ``KEY_OK``
+
+ - Send a confirmation code to application
+
+ - OK / ENTER / RETURN
+
+ - .. row 78
+
+ - ``KEY_ASPECT_RATIO``
+
+ - Select screen aspect ratio
+
+ - 4:3 16:9 SELECT
+
+ - .. row 79
+
+ - ``KEY_FULL_SCREEN``
+
+ - Put device into zoom/full screen mode
+
+ - ZOOM / FULL SCREEN / ZOOM+ / HIDE PANNEL / SWITCH
+
+ - .. row 80
+
+ - **Navigation keys**
+
+ - .. row 81
+
+ - ``KEY_ESC``
+
+ - Cancel current operation
+
+ - CANCEL / BACK
+
+ - .. row 82
+
+ - ``KEY_HELP``
+
+ - Open a Help window
+
+ - HELP
+
+ - .. row 83
+
+ - ``KEY_HOMEPAGE``
+
+ - Navigate to Homepage
+
+ - HOME
+
+ - .. row 84
+
+ - ``KEY_INFO``
+
+ - Open On Screen Display
+
+ - DISPLAY INFORMATION / OSD
+
+ - .. row 85
+
+ - ``KEY_WWW``
+
+ - Open the default browser
+
+ - WEB
+
+ - .. row 86
+
+ - ``KEY_UP``
+
+ - Up key
+
+ - UP
+
+ - .. row 87
+
+ - ``KEY_DOWN``
+
+ - Down key
+
+ - DOWN
+
+ - .. row 88
+
+ - ``KEY_LEFT``
+
+ - Left key
+
+ - LEFT
+
+ - .. row 89
+
+ - ``KEY_RIGHT``
+
+ - Right key
+
+ - RIGHT
+
+ - .. row 90
+
+ - **Miscellaneous keys**
+
+ - .. row 91
+
+ - ``KEY_DOT``
+
+ - Return a dot
+
+ - .
+
+ - .. row 92
+
+ - ``KEY_FN``
+
+ - Select a function
+
+ - FUNCTION
+
+
+It should be noted that, sometimes, there some fundamental missing keys
+at some cheaper IR's. Due to that, it is recommended to:
+
+
+.. _rc_keymap_notes:
+
+.. flat-table:: Notes
+ :header-rows: 0
+ :stub-columns: 0
+
+
+ - .. row 1
+
+ - On simpler IR's, without separate channel keys, you need to map UP
+ as ``KEY_CHANNELUP``
+
+ - .. row 2
+
+ - On simpler IR's, without separate channel keys, you need to map
+ DOWN as ``KEY_CHANNELDOWN``
+
+ - .. row 3
+
+ - On simpler IR's, without separate volume keys, you need to map
+ LEFT as ``KEY_VOLUMEDOWN``
+
+ - .. row 4
+
+ - On simpler IR's, without separate volume keys, you need to map
+ RIGHT as ``KEY_VOLUMEUP``
diff --git a/Documentation/userspace-api/media/rc/remote_controllers.rst b/Documentation/userspace-api/media/rc/remote_controllers.rst
new file mode 100644
index 000000000..2d9078acc
--- /dev/null
+++ b/Documentation/userspace-api/media/rc/remote_controllers.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. include:: <isonum.txt>
+
+.. _remote_controllers:
+
+################################
+Part III - Remote Controller API
+################################
+
+.. only:: html
+
+ .. class:: toc-title
+
+ Table of Contents
+
+.. toctree::
+ :maxdepth: 5
+ :numbered:
+
+ rc-intro
+ rc-sysfs-nodes
+ rc-protos
+ rc-tables
+ rc-table-change
+ lirc-dev
+
+
+**********************
+Revision and Copyright
+**********************
+
+Authors:
+
+- Carvalho Chehab, Mauro <mchehab@kernel.org>
+
+ - Initial version.
+
+**Copyright** |copy| 2009-2016 : Mauro Carvalho Chehab
+
+****************
+Revision History
+****************
+
+:revision: 3.15 / 2014-02-06 (*mcc*)
+
+Added the interface description and the RC sysfs class description.
+
+
+:revision: 1.0 / 2009-09-06 (*mcc*)
+
+Initial revision