summaryrefslogtreecommitdiffstats
path: root/Documentation/virt/kvm/s390-diag.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/virt/kvm/s390-diag.rst')
-rw-r--r--Documentation/virt/kvm/s390-diag.rst86
1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/virt/kvm/s390-diag.rst b/Documentation/virt/kvm/s390-diag.rst
new file mode 100644
index 000000000..eaac4864d
--- /dev/null
+++ b/Documentation/virt/kvm/s390-diag.rst
@@ -0,0 +1,86 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+The s390 DIAGNOSE call on KVM
+=============================
+
+KVM on s390 supports the DIAGNOSE call for making hypercalls, both for
+native hypercalls and for selected hypercalls found on other s390
+hypervisors.
+
+Note that bits are numbered as by the usual s390 convention (most significant
+bit on the left).
+
+
+General remarks
+---------------
+
+DIAGNOSE calls by the guest cause a mandatory intercept. This implies
+all supported DIAGNOSE calls need to be handled by either KVM or its
+userspace.
+
+All DIAGNOSE calls supported by KVM use the RS-a format::
+
+ --------------------------------------
+ | '83' | R1 | R3 | B2 | D2 |
+ --------------------------------------
+ 0 8 12 16 20 31
+
+The second-operand address (obtained by the base/displacement calculation)
+is not used to address data. Instead, bits 48-63 of this address specify
+the function code, and bits 0-47 are ignored.
+
+The supported DIAGNOSE function codes vary by the userspace used. For
+DIAGNOSE function codes not specific to KVM, please refer to the
+documentation for the s390 hypervisors defining them.
+
+
+DIAGNOSE function code 'X'500' - KVM virtio functions
+-----------------------------------------------------
+
+If the function code specifies 0x500, various virtio-related functions
+are performed.
+
+General register 1 contains the virtio subfunction code. Supported
+virtio subfunctions depend on KVM's userspace. Generally, userspace
+provides either s390-virtio (subcodes 0-2) or virtio-ccw (subcode 3).
+
+Upon completion of the DIAGNOSE instruction, general register 2 contains
+the function's return code, which is either a return code or a subcode
+specific value.
+
+Subcode 0 - s390-virtio notification and early console printk
+ Handled by userspace.
+
+Subcode 1 - s390-virtio reset
+ Handled by userspace.
+
+Subcode 2 - s390-virtio set status
+ Handled by userspace.
+
+Subcode 3 - virtio-ccw notification
+ Handled by either userspace or KVM (ioeventfd case).
+
+ General register 2 contains a subchannel-identification word denoting
+ the subchannel of the virtio-ccw proxy device to be notified.
+
+ General register 3 contains the number of the virtqueue to be notified.
+
+ General register 4 contains a 64bit identifier for KVM usage (the
+ kvm_io_bus cookie). If general register 4 does not contain a valid
+ identifier, it is ignored.
+
+ After completion of the DIAGNOSE call, general register 2 may contain
+ a 64bit identifier (in the kvm_io_bus cookie case), or a negative
+ error value, if an internal error occurred.
+
+ See also the virtio standard for a discussion of this hypercall.
+
+
+DIAGNOSE function code 'X'501 - KVM breakpoint
+----------------------------------------------
+
+If the function code specifies 0x501, breakpoint functions may be performed.
+This function code is handled by userspace.
+
+This diagnose function code has no subfunctions and uses no parameters.