diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/watchdog/convert_drivers_to_kernel_api.rst | 219 | ||||
| -rw-r--r-- | Documentation/watchdog/hpwdt.rst | 77 | ||||
| -rw-r--r-- | Documentation/watchdog/index.rst | 25 | ||||
| -rw-r--r-- | Documentation/watchdog/mlx-wdt.rst | 66 | ||||
| -rw-r--r-- | Documentation/watchdog/pcwd-watchdog.rst | 71 | ||||
| -rw-r--r-- | Documentation/watchdog/watchdog-api.rst | 271 | ||||
| -rw-r--r-- | Documentation/watchdog/watchdog-kernel-api.rst | 350 | ||||
| -rw-r--r-- | Documentation/watchdog/watchdog-parameters.rst | 728 | ||||
| -rw-r--r-- | Documentation/watchdog/watchdog-pm.rst | 22 | ||||
| -rw-r--r-- | Documentation/watchdog/wdt.rst | 63 |
10 files changed, 1892 insertions, 0 deletions
diff --git a/Documentation/watchdog/convert_drivers_to_kernel_api.rst b/Documentation/watchdog/convert_drivers_to_kernel_api.rst new file mode 100644 index 000000000..a1c3f038c --- /dev/null +++ b/Documentation/watchdog/convert_drivers_to_kernel_api.rst @@ -0,0 +1,219 @@ +========================================================= +Converting old watchdog drivers to the watchdog framework +========================================================= + +by Wolfram Sang <wsa@kernel.org> + +Before the watchdog framework came into the kernel, every driver had to +implement the API on its own. Now, as the framework factored out the common +components, those drivers can be lightened making it a user of the framework. +This document shall guide you for this task. The necessary steps are described +as well as things to look out for. + + +Remove the file_operations struct +--------------------------------- + +Old drivers define their own file_operations for actions like open(), write(), +etc... These are now handled by the framework and just call the driver when +needed. So, in general, the 'file_operations' struct and assorted functions can +go. Only very few driver-specific details have to be moved to other functions. +Here is a overview of the functions and probably needed actions: + +- open: Everything dealing with resource management (file-open checks, magic + close preparations) can simply go. Device specific stuff needs to go to the + driver specific start-function. Note that for some drivers, the start-function + also serves as the ping-function. If that is the case and you need start/stop + to be balanced (clocks!), you are better off refactoring a separate start-function. + +- close: Same hints as for open apply. + +- write: Can simply go, all defined behaviour is taken care of by the framework, + i.e. ping on write and magic char ('V') handling. + +- ioctl: While the driver is allowed to have extensions to the IOCTL interface, + the most common ones are handled by the framework, supported by some assistance + from the driver: + + WDIOC_GETSUPPORT: + Returns the mandatory watchdog_info struct from the driver + + WDIOC_GETSTATUS: + Needs the status-callback defined, otherwise returns 0 + + WDIOC_GETBOOTSTATUS: + Needs the bootstatus member properly set. Make sure it is 0 if you + don't have further support! + + WDIOC_SETOPTIONS: + No preparations needed + + WDIOC_KEEPALIVE: + If wanted, options in watchdog_info need to have WDIOF_KEEPALIVEPING + set + + WDIOC_SETTIMEOUT: + Options in watchdog_info need to have WDIOF_SETTIMEOUT set + and a set_timeout-callback has to be defined. The core will also + do limit-checking, if min_timeout and max_timeout in the watchdog + device are set. All is optional. + + WDIOC_GETTIMEOUT: + No preparations needed + + WDIOC_GETTIMELEFT: + It needs get_timeleft() callback to be defined. Otherwise it + will return EOPNOTSUPP + + Other IOCTLs can be served using the ioctl-callback. Note that this is mainly + intended for porting old drivers; new drivers should not invent private IOCTLs. + Private IOCTLs are processed first. When the callback returns with + -ENOIOCTLCMD, the IOCTLs of the framework will be tried, too. Any other error + is directly given to the user. + +Example conversion:: + + -static const struct file_operations s3c2410wdt_fops = { + - .owner = THIS_MODULE, + - .llseek = no_llseek, + - .write = s3c2410wdt_write, + - .unlocked_ioctl = s3c2410wdt_ioctl, + - .open = s3c2410wdt_open, + - .release = s3c2410wdt_release, + -}; + +Check the functions for device-specific stuff and keep it for later +refactoring. The rest can go. + + +Remove the miscdevice +--------------------- + +Since the file_operations are gone now, you can also remove the 'struct +miscdevice'. The framework will create it on watchdog_dev_register() called by +watchdog_register_device():: + + -static struct miscdevice s3c2410wdt_miscdev = { + - .minor = WATCHDOG_MINOR, + - .name = "watchdog", + - .fops = &s3c2410wdt_fops, + -}; + + +Remove obsolete includes and defines +------------------------------------ + +Because of the simplifications, a few defines are probably unused now. Remove +them. Includes can be removed, too. For example:: + + - #include <linux/fs.h> + - #include <linux/miscdevice.h> (if MODULE_ALIAS_MISCDEV is not used) + - #include <linux/uaccess.h> (if no custom IOCTLs are used) + + +Add the watchdog operations +--------------------------- + +All possible callbacks are defined in 'struct watchdog_ops'. You can find it +explained in 'watchdog-kernel-api.txt' in this directory. start() and +owner must be set, the rest are optional. You will easily find corresponding +functions in the old driver. Note that you will now get a pointer to the +watchdog_device as a parameter to these functions, so you probably have to +change the function header. Other changes are most likely not needed, because +here simply happens the direct hardware access. If you have device-specific +code left from the above steps, it should be refactored into these callbacks. + +Here is a simple example:: + + +static struct watchdog_ops s3c2410wdt_ops = { + + .owner = THIS_MODULE, + + .start = s3c2410wdt_start, + + .stop = s3c2410wdt_stop, + + .ping = s3c2410wdt_keepalive, + + .set_timeout = s3c2410wdt_set_heartbeat, + +}; + +A typical function-header change looks like:: + + -static void s3c2410wdt_keepalive(void) + +static int s3c2410wdt_keepalive(struct watchdog_device *wdd) + { + ... + + + + return 0; + } + + ... + + - s3c2410wdt_keepalive(); + + s3c2410wdt_keepalive(&s3c2410_wdd); + + +Add the watchdog device +----------------------- + +Now we need to create a 'struct watchdog_device' and populate it with the +necessary information for the framework. The struct is also explained in detail +in 'watchdog-kernel-api.txt' in this directory. We pass it the mandatory +watchdog_info struct and the newly created watchdog_ops. Often, old drivers +have their own record-keeping for things like bootstatus and timeout using +static variables. Those have to be converted to use the members in +watchdog_device. Note that the timeout values are unsigned int. Some drivers +use signed int, so this has to be converted, too. + +Here is a simple example for a watchdog device:: + + +static struct watchdog_device s3c2410_wdd = { + + .info = &s3c2410_wdt_ident, + + .ops = &s3c2410wdt_ops, + +}; + + +Handle the 'nowayout' feature +----------------------------- + +A few drivers use nowayout statically, i.e. there is no module parameter for it +and only CONFIG_WATCHDOG_NOWAYOUT determines if the feature is going to be +used. This needs to be converted by initializing the status variable of the +watchdog_device like this:: + + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, + +Most drivers, however, also allow runtime configuration of nowayout, usually +by adding a module parameter. The conversion for this would be something like:: + + watchdog_set_nowayout(&s3c2410_wdd, nowayout); + +The module parameter itself needs to stay, everything else related to nowayout +can go, though. This will likely be some code in open(), close() or write(). + + +Register the watchdog device +---------------------------- + +Replace misc_register(&miscdev) with watchdog_register_device(&watchdog_dev). +Make sure the return value gets checked and the error message, if present, +still fits. Also convert the unregister case:: + + - ret = misc_register(&s3c2410wdt_miscdev); + + ret = watchdog_register_device(&s3c2410_wdd); + + ... + + - misc_deregister(&s3c2410wdt_miscdev); + + watchdog_unregister_device(&s3c2410_wdd); + + +Update the Kconfig-entry +------------------------ + +The entry for the driver now needs to select WATCHDOG_CORE: + + + select WATCHDOG_CORE + + +Create a patch and send it to upstream +-------------------------------------- + +Make sure you understood Documentation/process/submitting-patches.rst and send your patch to +linux-watchdog@vger.kernel.org. We are looking forward to it :) diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst new file mode 100644 index 000000000..c824cd7f6 --- /dev/null +++ b/Documentation/watchdog/hpwdt.rst @@ -0,0 +1,77 @@ +=========================== +HPE iLO NMI Watchdog Driver +=========================== + +for iLO based ProLiant Servers +============================== + +Last reviewed: 08/20/2018 + + + The HPE iLO NMI Watchdog driver is a kernel module that provides basic + watchdog functionality and handler for the iLO "Generate NMI to System" + virtual button. + + All references to iLO in this document imply it also works on iLO2 and all + subsequent generations. + + Watchdog functionality is enabled like any other common watchdog driver. That + is, an application needs to be started that kicks off the watchdog timer. A + basic application exists in tools/testing/selftests/watchdog/ named + watchdog-test.c. Simply compile the C file and kick it off. If the system + gets into a bad state and hangs, the HPE ProLiant iLO timer register will + not be updated in a timely fashion and a hardware system reset (also known as + an Automatic Server Recovery (ASR)) event will occur. + + The hpwdt driver also has the following module parameters: + + ============ ================================================================ + soft_margin allows the user to set the watchdog timer value. + Default value is 30 seconds. + timeout an alias of soft_margin. + pretimeout allows the user to set the watchdog pretimeout value. + This is the number of seconds before timeout when an + NMI is delivered to the system. Setting the value to + zero disables the pretimeout NMI. + Default value is 9 seconds. + nowayout basic watchdog parameter that does not allow the timer to + be restarted or an impending ASR to be escaped. + Default value is set when compiling the kernel. If it is set + to "Y", then there is no way of disabling the watchdog once + it has been started. + kdumptimeout Minimum timeout in seconds to apply upon receipt of an NMI + before calling panic. (-1) disables the watchdog. When value + is > 0, the timer is reprogrammed with the greater of + value or current timeout value. + ============ ================================================================ + + NOTE: + More information about watchdog drivers in general, including the ioctl + interface to /dev/watchdog can be found in + Documentation/watchdog/watchdog-api.rst and Documentation/IPMI.txt. + + Due to limitations in the iLO hardware, the NMI pretimeout if enabled, + can only be set to 9 seconds. Attempts to set pretimeout to other + non-zero values will be rounded, possibly to zero. Users should verify + the pretimeout value after attempting to set pretimeout or timeout. + + Upon receipt of an NMI from the iLO, the hpwdt driver will initiate a + panic. This is to allow for a crash dump to be collected. It is incumbent + upon the user to have properly configured the system for kdump. + + The default Linux kernel behavior upon panic is to print a kernel tombstone + and loop forever. This is generally not what a watchdog user wants. + + For those wishing to learn more please see: + Documentation/admin-guide/kdump/kdump.rst + Documentation/admin-guide/kernel-parameters.txt (panic=) + Your Linux Distribution specific documentation. + + If the hpwdt does not receive the NMI associated with an expiring timer, + the iLO will proceed to reset the system at timeout if the timer hasn't + been updated. + +-- + + The HPE iLO NMI Watchdog Driver and documentation were originally developed + by Tom Mingarelli. diff --git a/Documentation/watchdog/index.rst b/Documentation/watchdog/index.rst new file mode 100644 index 000000000..c17764508 --- /dev/null +++ b/Documentation/watchdog/index.rst @@ -0,0 +1,25 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +Linux Watchdog Support +====================== + +.. toctree:: + :maxdepth: 1 + + hpwdt + mlx-wdt + pcwd-watchdog + watchdog-api + watchdog-kernel-api + watchdog-parameters + watchdog-pm + wdt + convert_drivers_to_kernel_api + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/watchdog/mlx-wdt.rst b/Documentation/watchdog/mlx-wdt.rst new file mode 100644 index 000000000..35e690dea --- /dev/null +++ b/Documentation/watchdog/mlx-wdt.rst @@ -0,0 +1,66 @@ +========================= +Mellanox watchdog drivers +========================= + +for x86 based system switches +============================= + +This driver provides watchdog functionality for various Mellanox +Ethernet and Infiniband switch systems. + +Mellanox watchdog device is implemented in a programmable logic device. + +There are 2 types of HW watchdog implementations. + +Type 1: + Actual HW timeout can be defined as a power of 2 msec. + e.g. timeout 20 sec will be rounded up to 32768 msec. + The maximum timeout period is 32 sec (32768 msec.), + Get time-left isn't supported + +Type 2: + Actual HW timeout is defined in sec. and it's the same as + a user-defined timeout. + Maximum timeout is 255 sec. + Get time-left is supported. + +Type 3: + Same as Type 2 with extended maximum timeout period. + Maximum timeout is 65535 sec. + +Type 1 HW watchdog implementation exist in old systems and +all new systems have type 2 HW watchdog. +Two types of HW implementation have also different register map. + +Type 3 HW watchdog implementation can exist on all Mellanox systems +with new programmer logic device. +It's differentiated by WD capability bit. +Old systems still have only one main watchdog. + +Mellanox system can have 2 watchdogs: main and auxiliary. +Main and auxiliary watchdog devices can be enabled together +on the same system. +There are several actions that can be defined in the watchdog: +system reset, start fans on full speed and increase register counter. +The last 2 actions are performed without a system reset. +Actions without reset are provided for auxiliary watchdog device, +which is optional. +Watchdog can be started during a probe, in this case it will be +pinged by watchdog core before watchdog device will be opened by +user space application. +Watchdog can be initialised in nowayout way, i.e. oncse started +it can't be stopped. + +This mlx-wdt driver supports both HW watchdog implementations. + +Watchdog driver is probed from the common mlx_platform driver. +Mlx_platform driver provides an appropriate set of registers for +Mellanox watchdog device, identity name (mlx-wdt-main or mlx-wdt-aux), +initial timeout, performed action in expiration and configuration flags. +watchdog configuration flags: nowayout and start_at_boot, hw watchdog +version - type1 or type2. +The driver checks during initialization if the previous system reset +was done by the watchdog. If yes, it makes a notification about this event. + +Access to HW registers is performed through a generic regmap interface. +Programmable logic device registers have little-endian order. diff --git a/Documentation/watchdog/pcwd-watchdog.rst b/Documentation/watchdog/pcwd-watchdog.rst new file mode 100644 index 000000000..405e2a370 --- /dev/null +++ b/Documentation/watchdog/pcwd-watchdog.rst @@ -0,0 +1,71 @@ +=================================== +Berkshire Products PC Watchdog Card +=================================== + +Last reviewed: 10/05/2007 + +Support for ISA Cards Revision A and C +======================================= + +Documentation and Driver by Ken Hollis <kenji@bitgate.com> + + The PC Watchdog is a card that offers the same type of functionality that + the WDT card does, only it doesn't require an IRQ to run. Furthermore, + the Revision C card allows you to monitor any IO Port to automatically + trigger the card into being reset. This way you can make the card + monitor hard drive status, or anything else you need. + + The Watchdog Driver has one basic role: to talk to the card and send + signals to it so it doesn't reset your computer ... at least during + normal operation. + + The Watchdog Driver will automatically find your watchdog card, and will + attach a running driver for use with that card. After the watchdog + drivers have initialized, you can then talk to the card using a PC + Watchdog program. + + I suggest putting a "watchdog -d" before the beginning of an fsck, and + a "watchdog -e -t 1" immediately after the end of an fsck. (Remember + to run the program with an "&" to run it in the background!) + + If you want to write a program to be compatible with the PC Watchdog + driver, simply use of modify the watchdog test program: + tools/testing/selftests/watchdog/watchdog-test.c + + + Other IOCTL functions include: + + WDIOC_GETSUPPORT + This returns the support of the card itself. This + returns in structure "PCWDS" which returns: + + options = WDIOS_TEMPPANIC + (This card supports temperature) + firmware_version = xxxx + (Firmware version of the card) + + WDIOC_GETSTATUS + This returns the status of the card, with the bits of + WDIOF_* bitwise-anded into the value. (The comments + are in linux/pcwd.h) + + WDIOC_GETBOOTSTATUS + This returns the status of the card that was reported + at bootup. + + WDIOC_GETTEMP + This returns the temperature of the card. (You can also + read /dev/watchdog, which gives a temperature update + every second.) + + WDIOC_SETOPTIONS + This lets you set the options of the card. You can either + enable or disable the card this way. + + WDIOC_KEEPALIVE + This pings the card to tell it not to reset your computer. + + And that's all she wrote! + + -- Ken Hollis + (kenji@bitgate.com) diff --git a/Documentation/watchdog/watchdog-api.rst b/Documentation/watchdog/watchdog-api.rst new file mode 100644 index 000000000..800dcd758 --- /dev/null +++ b/Documentation/watchdog/watchdog-api.rst @@ -0,0 +1,271 @@ +============================= +The Linux Watchdog driver API +============================= + +Last reviewed: 10/05/2007 + + + +Copyright 2002 Christer Weingel <wingel@nano-system.com> + +Some parts of this document are copied verbatim from the sbc60xxwdt +driver which is (c) Copyright 2000 Jakob Oestergaard <jakob@ostenfeld.dk> + +This document describes the state of the Linux 2.4.18 kernel. + +Introduction +============ + +A Watchdog Timer (WDT) is a hardware circuit that can reset the +computer system in case of a software fault. You probably knew that +already. + +Usually a userspace daemon will notify the kernel watchdog driver via the +/dev/watchdog special device file that userspace is still alive, at +regular intervals. When such a notification occurs, the driver will +usually tell the hardware watchdog that everything is in order, and +that the watchdog should wait for yet another little while to reset +the system. If userspace fails (RAM error, kernel bug, whatever), the +notifications cease to occur, and the hardware watchdog will reset the +system (causing a reboot) after the timeout occurs. + +The Linux watchdog API is a rather ad-hoc construction and different +drivers implement different, and sometimes incompatible, parts of it. +This file is an attempt to document the existing usage and allow +future driver writers to use it as a reference. + +The simplest API +================ + +All drivers support the basic mode of operation, where the watchdog +activates as soon as /dev/watchdog is opened and will reboot unless +the watchdog is pinged within a certain time, this time is called the +timeout or margin. The simplest way to ping the watchdog is to write +some data to the device. So a very simple watchdog daemon would look +like this source file: see samples/watchdog/watchdog-simple.c + +A more advanced driver could for example check that a HTTP server is +still responding before doing the write call to ping the watchdog. + +When the device is closed, the watchdog is disabled, unless the "Magic +Close" feature is supported (see below). This is not always such a +good idea, since if there is a bug in the watchdog daemon and it +crashes the system will not reboot. Because of this, some of the +drivers support the configuration option "Disable watchdog shutdown on +close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when compiling +the kernel, there is no way of disabling the watchdog once it has been +started. So, if the watchdog daemon crashes, the system will reboot +after the timeout has passed. Watchdog devices also usually support +the nowayout module parameter so that this option can be controlled at +runtime. + +Magic Close feature +=================== + +If a driver supports "Magic Close", the driver will not disable the +watchdog unless a specific magic character 'V' has been sent to +/dev/watchdog just before closing the file. If the userspace daemon +closes the file without sending this special character, the driver +will assume that the daemon (and userspace in general) died, and will +stop pinging the watchdog without disabling it first. This will then +cause a reboot if the watchdog is not re-opened in sufficient time. + +The ioctl API +============= + +All conforming drivers also support an ioctl API. + +Pinging the watchdog using an ioctl: + +All drivers that have an ioctl interface support at least one ioctl, +KEEPALIVE. This ioctl does exactly the same thing as a write to the +watchdog device, so the main loop in the above program could be +replaced with:: + + while (1) { + ioctl(fd, WDIOC_KEEPALIVE, 0); + sleep(10); + } + +the argument to the ioctl is ignored. + +Setting and getting the timeout +=============================== + +For some drivers it is possible to modify the watchdog timeout on the +fly with the SETTIMEOUT ioctl, those drivers have the WDIOF_SETTIMEOUT +flag set in their option field. The argument is an integer +representing the timeout in seconds. The driver returns the real +timeout used in the same variable, and this timeout might differ from +the requested one due to limitation of the hardware:: + + int timeout = 45; + ioctl(fd, WDIOC_SETTIMEOUT, &timeout); + printf("The timeout was set to %d seconds\n", timeout); + +This example might actually print "The timeout was set to 60 seconds" +if the device has a granularity of minutes for its timeout. + +Starting with the Linux 2.4.18 kernel, it is possible to query the +current timeout using the GETTIMEOUT ioctl:: + + ioctl(fd, WDIOC_GETTIMEOUT, &timeout); + printf("The timeout was is %d seconds\n", timeout); + +Pretimeouts +=========== + +Some watchdog timers can be set to have a trigger go off before the +actual time they will reset the system. This can be done with an NMI, +interrupt, or other mechanism. This allows Linux to record useful +information (like panic information and kernel coredumps) before it +resets:: + + pretimeout = 10; + ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout); + +Note that the pretimeout is the number of seconds before the time +when the timeout will go off. It is not the number of seconds until +the pretimeout. So, for instance, if you set the timeout to 60 seconds +and the pretimeout to 10 seconds, the pretimeout will go off in 50 +seconds. Setting a pretimeout to zero disables it. + +There is also a get function for getting the pretimeout:: + + ioctl(fd, WDIOC_GETPRETIMEOUT, &timeout); + printf("The pretimeout was is %d seconds\n", timeout); + +Not all watchdog drivers will support a pretimeout. + +Get the number of seconds before reboot +======================================= + +Some watchdog drivers have the ability to report the remaining time +before the system will reboot. The WDIOC_GETTIMELEFT is the ioctl +that returns the number of seconds before reboot:: + + ioctl(fd, WDIOC_GETTIMELEFT, &timeleft); + printf("The timeout was is %d seconds\n", timeleft); + +Environmental monitoring +======================== + +All watchdog drivers are required return more information about the system, +some do temperature, fan and power level monitoring, some can tell you +the reason for the last reboot of the system. The GETSUPPORT ioctl is +available to ask what the device can do:: + + struct watchdog_info ident; + ioctl(fd, WDIOC_GETSUPPORT, &ident); + +the fields returned in the ident struct are: + + ================ ============================================= + identity a string identifying the watchdog driver + firmware_version the firmware version of the card if available + options a flags describing what the device supports + ================ ============================================= + +the options field can have the following bits set, and describes what +kind of information that the GET_STATUS and GET_BOOT_STATUS ioctls can +return. + + ================ ========================= + WDIOF_OVERHEAT Reset due to CPU overheat + ================ ========================= + +The machine was last rebooted by the watchdog because the thermal limit was +exceeded: + + ============== ========== + WDIOF_FANFAULT Fan failed + ============== ========== + +A system fan monitored by the watchdog card has failed + + ============= ================ + WDIOF_EXTERN1 External relay 1 + ============= ================ + +External monitoring relay/source 1 was triggered. Controllers intended for +real world applications include external monitoring pins that will trigger +a reset. + + ============= ================ + WDIOF_EXTERN2 External relay 2 + ============= ================ + +External monitoring relay/source 2 was triggered + + ================ ===================== + WDIOF_POWERUNDER Power bad/power fault + ================ ===================== + +The machine is showing an undervoltage status + + =============== ============================= + WDIOF_CARDRESET Card previously reset the CPU + =============== ============================= + +The last reboot was caused by the watchdog card + + ================ ===================== + WDIOF_POWEROVER Power over voltage + ================ ===================== + +The machine is showing an overvoltage status. Note that if one level is +under and one over both bits will be set - this may seem odd but makes +sense. + + =================== ===================== + WDIOF_KEEPALIVEPING Keep alive ping reply + =================== ===================== + +The watchdog saw a keepalive ping since it was last queried. + + ================ ======================= + WDIOF_SETTIMEOUT Can set/get the timeout + ================ ======================= + +The watchdog can do pretimeouts. + + ================ ================================ + WDIOF_PRETIMEOUT Pretimeout (in seconds), get/set + ================ ================================ + + +For those drivers that return any bits set in the option field, the +GETSTATUS and GETBOOTSTATUS ioctls can be used to ask for the current +status, and the status at the last reboot, respectively:: + + int flags; + ioctl(fd, WDIOC_GETSTATUS, &flags); + + or + + ioctl(fd, WDIOC_GETBOOTSTATUS, &flags); + +Note that not all devices support these two calls, and some only +support the GETBOOTSTATUS call. + +Some drivers can measure the temperature using the GETTEMP ioctl. The +returned value is the temperature in degrees fahrenheit:: + + int temperature; + ioctl(fd, WDIOC_GETTEMP, &temperature); + +Finally the SETOPTIONS ioctl can be used to control some aspects of +the cards operation:: + + int options = 0; + ioctl(fd, WDIOC_SETOPTIONS, &options); + +The following options are available: + + ================= ================================ + WDIOS_DISABLECARD Turn off the watchdog timer + WDIOS_ENABLECARD Turn on the watchdog timer + WDIOS_TEMPPANIC Kernel panic on temperature trip + ================= ================================ + +[FIXME -- better explanations] diff --git a/Documentation/watchdog/watchdog-kernel-api.rst b/Documentation/watchdog/watchdog-kernel-api.rst new file mode 100644 index 000000000..baf44e986 --- /dev/null +++ b/Documentation/watchdog/watchdog-kernel-api.rst @@ -0,0 +1,350 @@ +=============================================== +The Linux WatchDog Timer Driver Core kernel API +=============================================== + +Last reviewed: 12-Feb-2013 + +Wim Van Sebroeck <wim@iguana.be> + +Introduction +------------ +This document does not describe what a WatchDog Timer (WDT) Driver or Device is. +It also does not describe the API which can be used by user space to communicate +with a WatchDog Timer. If you want to know this then please read the following +file: Documentation/watchdog/watchdog-api.rst . + +So what does this document describe? It describes the API that can be used by +WatchDog Timer Drivers that want to use the WatchDog Timer Driver Core +Framework. This framework provides all interfacing towards user space so that +the same code does not have to be reproduced each time. This also means that +a watchdog timer driver then only needs to provide the different routines +(operations) that control the watchdog timer (WDT). + +The API +------- +Each watchdog timer driver that wants to use the WatchDog Timer Driver Core +must #include <linux/watchdog.h> (you would have to do this anyway when +writing a watchdog device driver). This include file contains following +register/unregister routines:: + + extern int watchdog_register_device(struct watchdog_device *); + extern void watchdog_unregister_device(struct watchdog_device *); + +The watchdog_register_device routine registers a watchdog timer device. +The parameter of this routine is a pointer to a watchdog_device structure. +This routine returns zero on success and a negative errno code for failure. + +The watchdog_unregister_device routine deregisters a registered watchdog timer +device. The parameter of this routine is the pointer to the registered +watchdog_device structure. + +The watchdog subsystem includes an registration deferral mechanism, +which allows you to register an watchdog as early as you wish during +the boot process. + +The watchdog device structure looks like this:: + + struct watchdog_device { + int id; + struct device *parent; + const struct attribute_group **groups; + const struct watchdog_info *info; + const struct watchdog_ops *ops; + const struct watchdog_governor *gov; + unsigned int bootstatus; + unsigned int timeout; + unsigned int pretimeout; + unsigned int min_timeout; + unsigned int max_timeout; + unsigned int min_hw_heartbeat_ms; + unsigned int max_hw_heartbeat_ms; + struct notifier_block reboot_nb; + struct notifier_block restart_nb; + void *driver_data; + struct watchdog_core_data *wd_data; + unsigned long status; + struct list_head deferred; + }; + +It contains following fields: + +* id: set by watchdog_register_device, id 0 is special. It has both a + /dev/watchdog0 cdev (dynamic major, minor 0) as well as the old + /dev/watchdog miscdev. The id is set automatically when calling + watchdog_register_device. +* parent: set this to the parent device (or NULL) before calling + watchdog_register_device. +* groups: List of sysfs attribute groups to create when creating the watchdog + device. +* info: a pointer to a watchdog_info structure. This structure gives some + additional information about the watchdog timer itself. (Like it's unique name) +* ops: a pointer to the list of watchdog operations that the watchdog supports. +* gov: a pointer to the assigned watchdog device pretimeout governor or NULL. +* timeout: the watchdog timer's timeout value (in seconds). + This is the time after which the system will reboot if user space does + not send a heartbeat request if WDOG_ACTIVE is set. +* pretimeout: the watchdog timer's pretimeout value (in seconds). +* min_timeout: the watchdog timer's minimum timeout value (in seconds). + If set, the minimum configurable value for 'timeout'. +* max_timeout: the watchdog timer's maximum timeout value (in seconds), + as seen from userspace. If set, the maximum configurable value for + 'timeout'. Not used if max_hw_heartbeat_ms is non-zero. +* min_hw_heartbeat_ms: Hardware limit for minimum time between heartbeats, + in milli-seconds. This value is normally 0; it should only be provided + if the hardware can not tolerate lower intervals between heartbeats. +* max_hw_heartbeat_ms: Maximum hardware heartbeat, in milli-seconds. + If set, the infrastructure will send heartbeats to the watchdog driver + if 'timeout' is larger than max_hw_heartbeat_ms, unless WDOG_ACTIVE + is set and userspace failed to send a heartbeat for at least 'timeout' + seconds. max_hw_heartbeat_ms must be set if a driver does not implement + the stop function. +* reboot_nb: notifier block that is registered for reboot notifications, for + internal use only. If the driver calls watchdog_stop_on_reboot, watchdog core + will stop the watchdog on such notifications. +* restart_nb: notifier block that is registered for machine restart, for + internal use only. If a watchdog is capable of restarting the machine, it + should define ops->restart. Priority can be changed through + watchdog_set_restart_priority. +* bootstatus: status of the device after booting (reported with watchdog + WDIOF_* status bits). +* driver_data: a pointer to the drivers private data of a watchdog device. + This data should only be accessed via the watchdog_set_drvdata and + watchdog_get_drvdata routines. +* wd_data: a pointer to watchdog core internal data. +* status: this field contains a number of status bits that give extra + information about the status of the device (Like: is the watchdog timer + running/active, or is the nowayout bit set). +* deferred: entry in wtd_deferred_reg_list which is used to + register early initialized watchdogs. + +The list of watchdog operations is defined as:: + + struct watchdog_ops { + struct module *owner; + /* mandatory operations */ + int (*start)(struct watchdog_device *); + /* optional operations */ + int (*stop)(struct watchdog_device *); + int (*ping)(struct watchdog_device *); + unsigned int (*status)(struct watchdog_device *); + int (*set_timeout)(struct watchdog_device *, unsigned int); + int (*set_pretimeout)(struct watchdog_device *, unsigned int); + unsigned int (*get_timeleft)(struct watchdog_device *); + int (*restart)(struct watchdog_device *); + long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); + }; + +It is important that you first define the module owner of the watchdog timer +driver's operations. This module owner will be used to lock the module when +the watchdog is active. (This to avoid a system crash when you unload the +module and /dev/watchdog is still open). + +Some operations are mandatory and some are optional. The mandatory operations +are: + +* start: this is a pointer to the routine that starts the watchdog timer + device. + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + +Not all watchdog timer hardware supports the same functionality. That's why +all other routines/operations are optional. They only need to be provided if +they are supported. These optional routines/operations are: + +* stop: with this routine the watchdog timer device is being stopped. + + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + Some watchdog timer hardware can only be started and not be stopped. A + driver supporting such hardware does not have to implement the stop routine. + + If a driver has no stop function, the watchdog core will set WDOG_HW_RUNNING + and start calling the driver's keepalive pings function after the watchdog + device is closed. + + If a watchdog driver does not implement the stop function, it must set + max_hw_heartbeat_ms. +* ping: this is the routine that sends a keepalive ping to the watchdog timer + hardware. + + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + + Most hardware that does not support this as a separate function uses the + start function to restart the watchdog timer hardware. And that's also what + the watchdog timer driver core does: to send a keepalive ping to the watchdog + timer hardware it will either use the ping operation (when available) or the + start operation (when the ping operation is not available). + + (Note: the WDIOC_KEEPALIVE ioctl call will only be active when the + WDIOF_KEEPALIVEPING bit has been set in the option field on the watchdog's + info structure). +* status: this routine checks the status of the watchdog timer device. The + status of the device is reported with watchdog WDIOF_* status flags/bits. + + WDIOF_MAGICCLOSE and WDIOF_KEEPALIVEPING are reported by the watchdog core; + it is not necessary to report those bits from the driver. Also, if no status + function is provided by the driver, the watchdog core reports the status bits + provided in the bootstatus variable of struct watchdog_device. + +* set_timeout: this routine checks and changes the timeout of the watchdog + timer device. It returns 0 on success, -EINVAL for "parameter out of range" + and -EIO for "could not write value to the watchdog". On success this + routine should set the timeout value of the watchdog_device to the + achieved timeout value (which may be different from the requested one + because the watchdog does not necessarily have a 1 second resolution). + + Drivers implementing max_hw_heartbeat_ms set the hardware watchdog heartbeat + to the minimum of timeout and max_hw_heartbeat_ms. Those drivers set the + timeout value of the watchdog_device either to the requested timeout value + (if it is larger than max_hw_heartbeat_ms), or to the achieved timeout value. + (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the + watchdog's info structure). + + If the watchdog driver does not have to perform any action but setting the + watchdog_device.timeout, this callback can be omitted. + + If set_timeout is not provided but, WDIOF_SETTIMEOUT is set, the watchdog + infrastructure updates the timeout value of the watchdog_device internally + to the requested value. + + If the pretimeout feature is used (WDIOF_PRETIMEOUT), then set_timeout must + also take care of checking if pretimeout is still valid and set up the timer + accordingly. This can't be done in the core without races, so it is the + duty of the driver. +* set_pretimeout: this routine checks and changes the pretimeout value of + the watchdog. It is optional because not all watchdogs support pretimeout + notification. The timeout value is not an absolute time, but the number of + seconds before the actual timeout would happen. It returns 0 on success, + -EINVAL for "parameter out of range" and -EIO for "could not write value to + the watchdog". A value of 0 disables pretimeout notification. + + (Note: the WDIOF_PRETIMEOUT needs to be set in the options field of the + watchdog's info structure). + + If the watchdog driver does not have to perform any action but setting the + watchdog_device.pretimeout, this callback can be omitted. That means if + set_pretimeout is not provided but WDIOF_PRETIMEOUT is set, the watchdog + infrastructure updates the pretimeout value of the watchdog_device internally + to the requested value. + +* get_timeleft: this routines returns the time that's left before a reset. +* restart: this routine restarts the machine. It returns 0 on success or a + negative errno code for failure. +* ioctl: if this routine is present then it will be called first before we do + our own internal ioctl call handling. This routine should return -ENOIOCTLCMD + if a command is not supported. The parameters that are passed to the ioctl + call are: watchdog_device, cmd and arg. + +The status bits should (preferably) be set with the set_bit and clear_bit alike +bit-operations. The status bits that are defined are: + +* WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device + is active or not from user perspective. User space is expected to send + heartbeat requests to the driver while this flag is set. +* WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog. + If this bit is set then the watchdog timer will not be able to stop. +* WDOG_HW_RUNNING: Set by the watchdog driver if the hardware watchdog is + running. The bit must be set if the watchdog timer hardware can not be + stopped. The bit may also be set if the watchdog timer is running after + booting, before the watchdog device is opened. If set, the watchdog + infrastructure will send keepalives to the watchdog hardware while + WDOG_ACTIVE is not set. + Note: when you register the watchdog timer device with this bit set, + then opening /dev/watchdog will skip the start operation but send a keepalive + request instead. + + To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog + timer device) you can either: + + * set it statically in your watchdog_device struct with + + .status = WATCHDOG_NOWAYOUT_INIT_STATUS, + + (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or + * use the following helper function:: + + static inline void watchdog_set_nowayout(struct watchdog_device *wdd, + int nowayout) + +Note: + The WatchDog Timer Driver Core supports the magic close feature and + the nowayout feature. To use the magic close feature you must set the + WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. + +The nowayout feature will overrule the magic close feature. + +To get or set driver specific data the following two helper functions should be +used:: + + static inline void watchdog_set_drvdata(struct watchdog_device *wdd, + void *data) + static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) + +The watchdog_set_drvdata function allows you to add driver specific data. The +arguments of this function are the watchdog device where you want to add the +driver specific data to and a pointer to the data itself. + +The watchdog_get_drvdata function allows you to retrieve driver specific data. +The argument of this function is the watchdog device where you want to retrieve +data from. The function returns the pointer to the driver specific data. + +To initialize the timeout field, the following function can be used:: + + extern int watchdog_init_timeout(struct watchdog_device *wdd, + unsigned int timeout_parm, + struct device *dev); + +The watchdog_init_timeout function allows you to initialize the timeout field +using the module timeout parameter or by retrieving the timeout-sec property from +the device tree (if the module timeout parameter is invalid). Best practice is +to set the default timeout value as timeout value in the watchdog_device and +then use this function to set the user "preferred" timeout value. +This routine returns zero on success and a negative errno code for failure. + +To disable the watchdog on reboot, the user must call the following helper:: + + static inline void watchdog_stop_on_reboot(struct watchdog_device *wdd); + +To disable the watchdog when unregistering the watchdog, the user must call +the following helper. Note that this will only stop the watchdog if the +nowayout flag is not set. + +:: + + static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd); + +To change the priority of the restart handler the following helper should be +used:: + + void watchdog_set_restart_priority(struct watchdog_device *wdd, int priority); + +User should follow the following guidelines for setting the priority: + +* 0: should be called in last resort, has limited restart capabilities +* 128: default restart handler, use if no other handler is expected to be + available, and/or if restart is sufficient to restart the entire system +* 255: highest priority, will preempt all other restart handlers + +To raise a pretimeout notification, the following function should be used:: + + void watchdog_notify_pretimeout(struct watchdog_device *wdd) + +The function can be called in the interrupt context. If watchdog pretimeout +governor framework (kbuild CONFIG_WATCHDOG_PRETIMEOUT_GOV symbol) is enabled, +an action is taken by a preconfigured pretimeout governor preassigned to +the watchdog device. If watchdog pretimeout governor framework is not +enabled, watchdog_notify_pretimeout() prints a notification message to +the kernel log buffer. + +To set the last known HW keepalive time for a watchdog, the following function +should be used:: + + int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd, + unsigned int last_ping_ms) + +This function must be called immediately after watchdog registration. It +sets the last known hardware heartbeat to have happened last_ping_ms before +current time. Calling this is only needed if the watchdog is already running +when probe is called, and the watchdog can only be pinged after the +min_hw_heartbeat_ms time has passed from the last ping. diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst new file mode 100644 index 000000000..223c99361 --- /dev/null +++ b/Documentation/watchdog/watchdog-parameters.rst @@ -0,0 +1,728 @@ +========================== +WatchDog Module Parameters +========================== + +This file provides information on the module parameters of many of +the Linux watchdog drivers. Watchdog driver parameter specs should +be listed here unless the driver has its own driver-specific information +file. + +See Documentation/admin-guide/kernel-parameters.rst for information on +providing kernel parameters for builtin drivers versus loadable +modules. + +------------------------------------------------- + +watchdog core: + open_timeout: + Maximum time, in seconds, for which the watchdog framework will take + care of pinging a running hardware watchdog until userspace opens the + corresponding /dev/watchdogN device. A value of 0 means an infinite + timeout. Setting this to a non-zero value can be useful to ensure that + either userspace comes up properly, or the board gets reset and allows + fallback logic in the bootloader to try something else. + +------------------------------------------------- + +acquirewdt: + wdt_stop: + Acquire WDT 'stop' io port (default 0x43) + wdt_start: + Acquire WDT 'start' io port (default 0x443) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +advantechwdt: + wdt_stop: + Advantech WDT 'stop' io port (default 0x443) + wdt_start: + Advantech WDT 'start' io port (default 0x443) + timeout: + Watchdog timeout in seconds. 1<= timeout <=63, default=60. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +alim1535_wdt: + timeout: + Watchdog timeout in seconds. (0 < timeout < 18000, default=60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +alim7101_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=30 + use_gpio: + Use the gpio watchdog (required by old cobalt boards). + default=0/off/no + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ar7_wdt: + margin: + Watchdog margin in seconds (default=60) + nowayout: + Disable watchdog shutdown on close + (default=kernel config parameter) + +------------------------------------------------- + +armada_37xx_wdt: + timeout: + Watchdog timeout in seconds. (default=120) + nowayout: + Disable watchdog shutdown on close + (default=kernel config parameter) + +------------------------------------------------- + +at91rm9200_wdt: + wdt_time: + Watchdog time in seconds. (default=5) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +at91sam9_wdt: + heartbeat: + Watchdog heartbeats in seconds. (default = 15) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +bcm47xx_wdt: + wdt_time: + Watchdog time in seconds. (default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +coh901327_wdt: + margin: + Watchdog margin in seconds (default 60s) + +------------------------------------------------- + +cpu5wdt: + port: + base address of watchdog card, default is 0x91 + verbose: + be verbose, default is 0 (no) + ticks: + count down ticks, default is 10000 + +------------------------------------------------- + +cpwd: + wd0_timeout: + Default watchdog0 timeout in 1/10secs + wd1_timeout: + Default watchdog1 timeout in 1/10secs + wd2_timeout: + Default watchdog2 timeout in 1/10secs + +------------------------------------------------- + +da9052wdt: + timeout: + Watchdog timeout in seconds. 2<= timeout <=131, default=2.048s + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +davinci_wdt: + heartbeat: + Watchdog heartbeat period in seconds from 1 to 600, default 60 + +------------------------------------------------- + +ebc-c384_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=15300, default=60) + nowayout: + Watchdog cannot be stopped once started + +------------------------------------------------- + +ep93xx_wdt: + nowayout: + Watchdog cannot be stopped once started + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) + +------------------------------------------------- + +eurotechwdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + io: + Eurotech WDT io port (default=0x3f0) + irq: + Eurotech WDT irq (default=10) + ev: + Eurotech WDT event type (default is `int`) + +------------------------------------------------- + +gef_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +geodewdt: + timeout: + Watchdog timeout in seconds. 1<= timeout <=131, default=60. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +i6300esb: + heartbeat: + Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +iTCO_wdt: + heartbeat: + Watchdog heartbeat in seconds. + (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +iTCO_vendor_support: + vendorsupport: + iTCO vendor specific support mode, default=0 (none), + 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS + +------------------------------------------------- + +ib700wdt: + timeout: + Watchdog timeout in seconds. 0<= timeout <=30, default=30. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ibmasr: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +imx2_wdt: + timeout: + Watchdog timeout in seconds (default 60 s) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +indydog: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +iop_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +it8712f_wdt: + margin: + Watchdog margin in seconds (default 60) + nowayout: + Disable watchdog shutdown on close + (default=kernel config parameter) + +------------------------------------------------- + +it87_wdt: + nogameport: + Forbid the activation of game port, default=0 + nocir: + Forbid the use of CIR (workaround for some buggy setups); set to 1 if +system resets despite watchdog daemon running, default=0 + exclusive: + Watchdog exclusive device open, default=1 + timeout: + Watchdog timeout in seconds, default=60 + testmode: + Watchdog test mode (1 = no reboot), default=0 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ixp4xx_wdt: + heartbeat: + Watchdog heartbeat in seconds (default 60s) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +machzwd: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + action: + after watchdog resets, generate: + 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI + +------------------------------------------------- + +max63xx_wdt: + heartbeat: + Watchdog heartbeat period in seconds from 1 to 60, default 60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + nodelay: + Force selection of a timeout setting without initial delay + (max6373/74 only, default=0) + +------------------------------------------------- + +mixcomwd: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +mpc8xxx_wdt: + timeout: + Watchdog timeout in ticks. (0<timeout<65536, default=65535) + reset: + Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +mv64x60_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ni903x_wdt: + timeout: + Initial watchdog timeout in seconds (0<timeout<516, default=60) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +nic7018_wdt: + timeout: + Initial watchdog timeout in seconds (0<timeout<464, default=80) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +omap_wdt: + timer_margin: + initial watchdog timeout (in seconds) + early_enable: + Watchdog is started on module insertion (default=0 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +orion_wdt: + heartbeat: + Initial watchdog heartbeat in seconds + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +pc87413_wdt: + io: + pc87413 WDT I/O port (default: io). + timeout: + Watchdog timeout in minutes (default=timeout). + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +pika_wdt: + heartbeat: + Watchdog heartbeats in seconds. (default = 15) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +pnx4008_wdt: + heartbeat: + Watchdog heartbeat period in seconds from 1 to 60, default 19 + nowayout: + Set to 1 to keep watchdog running after device release + +------------------------------------------------- + +pnx833x_wdt: + timeout: + Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + start_enabled: + Watchdog is started on module insertion (default=1) + +------------------------------------------------- + +rc32434_wdt: + timeout: + Watchdog timeout value, in seconds (default=20) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +riowd: + riowd_timeout: + Watchdog timeout in minutes (default=1) + +------------------------------------------------- + +s3c2410_wdt: + tmr_margin: + Watchdog tmr_margin in seconds. (default=15) + tmr_atboot: + Watchdog is started at boot time if set to 1, default=0 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + soft_noboot: + Watchdog action, set to 1 to ignore reboots, 0 to reboot + debug: + Watchdog debug, set to >1 for debug, (default 0) + +------------------------------------------------- + +sa1100_wdt: + margin: + Watchdog margin in seconds (default 60s) + +------------------------------------------------- + +sb_wdog: + timeout: + Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) + +------------------------------------------------- + +sbc60xxwdt: + wdt_stop: + SBC60xx WDT 'stop' io port (default 0x45) + wdt_start: + SBC60xx WDT 'start' io port (default 0x443) + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sbc7240_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=255, default=30) + nowayout: + Disable watchdog when closing device file + +------------------------------------------------- + +sbc8360: + timeout: + Index into timeout table (0-63) (default=27 (60s)) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sbc_epx_c3: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sbc_fitpc2_wdt: + margin: + Watchdog margin in seconds (default 60s) + nowayout: + Watchdog cannot be stopped once started + +------------------------------------------------- + +sbsa_gwdt: + timeout: + Watchdog timeout in seconds. (default 10s) + action: + Watchdog action at the first stage timeout, + set to 0 to ignore, 1 to panic. (default=0) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sc1200wdt: + isapnp: + When set to 0 driver ISA PnP support will be disabled (default=1) + io: + io port + timeout: + range is 0-255 minutes, default is 1 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sc520_wdt: + timeout: + Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sch311x_wdt: + force_id: + Override the detected device ID + therm_trip: + Should a ThermTrip trigger the reset generator + timeout: + Watchdog timeout in seconds. 1<= timeout <=15300, default=60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +scx200_wdt: + margin: + Watchdog margin in seconds + nowayout: + Disable watchdog shutdown on close + +------------------------------------------------- + +shwdt: + clock_division_ratio: + Clock division ratio. Valid ranges are from 0x5 (1.31ms) + to 0x7 (5.25ms). (default=7) + heartbeat: + Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +smsc37b787_wdt: + timeout: + range is 1-255 units, default is 60 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +softdog: + soft_margin: + Watchdog soft_margin in seconds. + (0 < soft_margin < 65536, default=60) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + soft_noboot: + Softdog action, set to 1 to ignore reboots, 0 to reboot + (default=0) + +------------------------------------------------- + +stmp3xxx_wdt: + heartbeat: + Watchdog heartbeat period in seconds from 1 to 4194304, default 19 + +------------------------------------------------- + +tegra_wdt: + heartbeat: + Watchdog heartbeats in seconds. (default = 120) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +ts72xx_wdt: + timeout: + Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) + nowayout: + Disable watchdog shutdown on close + +------------------------------------------------- + +twl4030_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +txx9wdt: + timeout: + Watchdog timeout in seconds. (0<timeout<N, default=60) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +uniphier_wdt: + timeout: + Watchdog timeout in power of two seconds. + (1 <= timeout <= 128, default=64) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +w83627hf_wdt: + wdt_io: + w83627hf/thf WDT io port (default 0x2E) + timeout: + Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +w83877f_wdt: + timeout: + Watchdog timeout in seconds. (1<=timeout<=3600, default=30) + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +w83977f_wdt: + timeout: + Watchdog timeout in seconds (15..7635), default=45) + testmode: + Watchdog testmode (1 = no reboot), default=0 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +wafer5823wdt: + timeout: + Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +wdt285: + soft_margin: + Watchdog timeout in seconds (default=60) + +------------------------------------------------- + +wdt977: + timeout: + Watchdog timeout in seconds (60..15300, default=60) + testmode: + Watchdog testmode (1 = no reboot), default=0 + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +wm831x_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +wm8350_wdt: + nowayout: + Watchdog cannot be stopped once started + (default=kernel config parameter) + +------------------------------------------------- + +sun4v_wdt: + timeout_ms: + Watchdog timeout in milliseconds 1..180000, default=60000) + nowayout: + Watchdog cannot be stopped once started diff --git a/Documentation/watchdog/watchdog-pm.rst b/Documentation/watchdog/watchdog-pm.rst new file mode 100644 index 000000000..646e1f28f --- /dev/null +++ b/Documentation/watchdog/watchdog-pm.rst @@ -0,0 +1,22 @@ +=============================================== +The Linux WatchDog Timer Power Management Guide +=============================================== + +Last reviewed: 17-Dec-2018 + +Wolfram Sang <wsa+renesas@sang-engineering.com> + +Introduction +------------ +This document states rules about watchdog devices and their power management +handling to ensure a uniform behaviour for Linux systems. + + +Ping on resume +-------------- +On resume, a watchdog timer shall be reset to its selected value to give +userspace enough time to resume. [1] [2] + +[1] https://patchwork.kernel.org/patch/10252209/ + +[2] https://patchwork.kernel.org/patch/10711625/ diff --git a/Documentation/watchdog/wdt.rst b/Documentation/watchdog/wdt.rst new file mode 100644 index 000000000..d97b03615 --- /dev/null +++ b/Documentation/watchdog/wdt.rst @@ -0,0 +1,63 @@ +============================================================ +WDT Watchdog Timer Interfaces For The Linux Operating System +============================================================ + +Last Reviewed: 10/05/2007 + +Alan Cox <alan@lxorguk.ukuu.org.uk> + + - ICS WDT501-P + - ICS WDT501-P (no fan tachometer) + - ICS WDT500-P + +All the interfaces provide /dev/watchdog, which when open must be written +to within a timeout or the machine will reboot. Each write delays the reboot +time another timeout. In the case of the software watchdog the ability to +reboot will depend on the state of the machines and interrupts. The hardware +boards physically pull the machine down off their own onboard timers and +will reboot from almost anything. + +A second temperature monitoring interface is available on the WDT501P cards. +This provides /dev/temperature. This is the machine internal temperature in +degrees Fahrenheit. Each read returns a single byte giving the temperature. + +The third interface logs kernel messages on additional alert events. + +The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to +pass IO address and IRQ boot parameters. E.g.:: + + wdt.io=0x240 wdt.irq=11 + +Other "wdt" driver parameters are: + + =========== ====================================================== + heartbeat Watchdog heartbeat in seconds (default 60) + nowayout Watchdog cannot be stopped once started (kernel + build parameter) + tachometer WDT501-P Fan Tachometer support (0=disable, default=0) + type WDT501-P Card type (500 or 501, default=500) + =========== ====================================================== + +Features +-------- + +================ ======= ======= + WDT501P WDT500P +================ ======= ======= +Reboot Timer X X +External Reboot X X +I/O Port Monitor o o +Temperature X o +Fan Speed X o +Power Under X o +Power Over X o +Overheat X o +================ ======= ======= + +The external event interfaces on the WDT boards are not currently supported. +Minor numbers are however allocated for it. + + +Example Watchdog Driver: + + see samples/watchdog/watchdog-simple.c |