1 files changed, 117 insertions, 0 deletions
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
new file mode 100644
index 000000000..e201b4b16
--- /dev/null
+++ b/arch/arc/include/asm/cacheflush.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ *  vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
+ *   -flush_cache_dup_mm (fork)
+ *   -likewise for flush_cache_mm (exit/execve)
+ *   -likewise for flush_cache_{range,page} (munmap, exit, COW-break)
+ *
+ *  vineetg: April 2008
+ *   -Added a critical CacheLine flush to copy_to_user_page( ) which
+ *     was causing gdbserver to not setup breakpoints consistently
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/shmparam.h>
+
+/*
+ * Semantically we need this because icache doesn't snoop dcache/dma.
+ * However ARC Cache flush requires paddr as well as vaddr, latter not available
+ * in the flush_icache_page() API. So we no-op it but do the equivalent work
+ * in update_mmu_cache()
+ */
+#define flush_icache_page(vma, page)
+
+void flush_cache_all(void);
+
+void flush_icache_range(unsigned long kstart, unsigned long kend);
+void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
+void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
+void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
+
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+
+void flush_dcache_page(struct page *page);
+
+void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
+void dma_cache_inv(phys_addr_t start, unsigned long sz);
+void dma_cache_wback(phys_addr_t start, unsigned long sz);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* TBD: optimize this */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
+
+#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
+
+#define flush_cache_mm(mm)			/* called on munmap/exit */
+#define flush_cache_range(mm, u_vstart, u_vend)
+#define flush_cache_page(vma, u_vaddr, pfn)	/* PF handling/COW-break */
+
+#else	/* VIPT aliasing dcache */
+
+/* To clear out stale userspace mappings */
+void flush_cache_mm(struct mm_struct *mm);
+void flush_cache_range(struct vm_area_struct *vma,
+	unsigned long start,unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma,
+	unsigned long user_addr, unsigned long page);
+
+/*
+ * To make sure that userspace mapping is flushed to memory before
+ * get_user_pages() uses a kernel mapping to access the page
+ */
+#define ARCH_HAS_FLUSH_ANON_PAGE
+void flush_anon_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long u_vaddr);
+
+#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
+
+/*
+ * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
+ * This works around some PIO based drivers which don't call flush_dcache_page
+ * to record that they dirtied the dcache
+ */
+#define PG_dc_clean	PG_arch_1
+
+#define CACHE_COLORS_NUM	4
+#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
+#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
+
+/*
+ * Simple wrapper over config option
+ * Bootup code ensures that hardware matches kernel configuration
+ */
+static inline int cache_is_vipt_aliasing(void)
+{
+	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+}
+
+/*
+ * checks if two addresses (after page aligning) index into same cache set
+ */
+#define addr_not_cache_congruent(addr1, addr2)				\
+({									\
+	cache_is_vipt_aliasing() ? 					\
+		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
+})
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+do {									\
+	memcpy(dst, src, len);						\
+	if (vma->vm_flags & VM_EXEC)					\
+		__sync_icache_dcache((unsigned long)(dst), vaddr, len);	\
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)		\
+	memcpy(dst, src, len);						\
+
+#endif