summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dra7.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/dra7.dtsi')
-rw-r--r--arch/arm/boot/dts/dra7.dtsi1112
1 files changed, 1112 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
new file mode 100644
index 000000000..998932136
--- /dev/null
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -0,0 +1,1112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dra7.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+#include <dt-bindings/clock/dra7.h>
+
+#define MAX_SOURCES 400
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ compatible = "ti,dra7xx";
+ interrupt-parent = <&crossbar_mpu>;
+ chosen { };
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ i2c4 = &i2c5;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ serial9 = &uart10;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
+ d_can0 = &dcan1;
+ d_can1 = &dcan2;
+ spi0 = &qspi;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ status = "disabled"; /* See ARM architected timer wrap erratum i940 */
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+
+ gic: interrupt-controller@48211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x48211000 0x0 0x1000>,
+ <0x0 0x48212000 0x0 0x2000>,
+ <0x0 0x48214000 0x0 0x2000>,
+ <0x0 0x48216000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ wakeupgen: interrupt-controller@48281000 {
+ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x48281000 0x0 0x1000>;
+ interrupt-parent = <&gic>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+
+ vbb-supply = <&abb_mpu>;
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_wkup>;
+
+ opp_nom-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>,
+ <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp_od-1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>,
+ <1160000 885000 1160000>;
+
+ opp-supported-hw = <0xFF 0x02>;
+ };
+
+ opp_high@1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1210000 950000 1250000>,
+ <1210000 950000 1250000>;
+ opp-supported-hw = <0xFF 0x04>;
+ };
+ };
+
+ /*
+ * The soc node represents the soc top level view. It is used for IPs
+ * that are not memory mapped in the MPU view or for the MPU itself.
+ */
+ soc {
+ compatible = "ti,omap-infra";
+ mpu {
+ compatible = "ti,omap5-mpu";
+ ti,hwmods = "mpu";
+ };
+ };
+
+ /*
+ * XXX: Use a flat representation of the SOC interconnect.
+ * The real OMAP interconnect network is quite complex.
+ * Since it will not bring real advantage to represent that in DT for
+ * the moment, just use a fake OCP bus entry to represent the whole bus
+ * hierarchy.
+ */
+ ocp: ocp {
+ compatible = "ti,dra7-l3-noc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0xc0000000>;
+ dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
+ ti,hwmods = "l3_main_1", "l3_main_2";
+ reg = <0x0 0x44000000 0x0 0x1000000>,
+ <0x0 0x45000000 0x0 0x1000>;
+ interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+ l4_cfg: interconnect@4a000000 {
+ };
+ l4_wkup: interconnect@4ae00000 {
+ };
+ l4_per1: interconnect@48000000 {
+ };
+ l4_per2: interconnect@48400000 {
+ };
+ l4_per3: interconnect@48800000 {
+ };
+
+ axi@0 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ dma-ranges;
+ /**
+ * To enable PCI endpoint mode, disable the pcie1_rc
+ * node and enable pcie1_ep mode.
+ */
+ pcie1_rc: pcie@51000000 {
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ bus-range = <0x00 0xff>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ linux,pci-domain = <0>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+ <0 0 0 2 &pcie1_intc 2>,
+ <0 0 0 3 &pcie1_intc 3>,
+ <0 0 0 4 &pcie1_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+ status = "disabled";
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1_ep: pcie_ep@51000000 {
+ reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
+ reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+ interrupts = <0 232 0x4>;
+ num-lanes = <1>;
+ num-ib-windows = <4>;
+ num-ob-windows = <16>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+ ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+ status = "disabled";
+ };
+ };
+
+ axi@1 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51800000 0x51800000 0x3000
+ 0x0 0x30000000 0x10000000>;
+ dma-ranges;
+ status = "disabled";
+ pcie2_rc: pcie@51800000 {
+ reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 355 0x4>, <0 356 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ bus-range = <0x00 0xff>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ linux,pci-domain = <1>;
+ ti,hwmods = "pcie2";
+ phys = <&pcie2_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+ <0 0 0 2 &pcie2_intc 2>,
+ <0 0 0 3 &pcie2_intc 3>,
+ <0 0 0 4 &pcie2_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ ocmcram1: ocmcram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x80000>;
+ ranges = <0x0 0x40300000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * This is a placeholder for an optional reserved
+ * region for use by secure software. The size
+ * of this region is not known until runtime so it
+ * is set as zero to either be updated to reserve
+ * space or left unchanged to leave all SRAM for use.
+ * On HS parts that that require the reserved region
+ * either the bootloader can update the size to
+ * the required amount or the node can be overridden
+ * from the board dts file for the secure platform.
+ */
+ sram-hs@0 {
+ compatible = "ti,secure-ram";
+ reg = <0x0 0x0>;
+ };
+ };
+
+ /*
+ * NOTE: ocmcram2 and ocmcram3 are not available on all
+ * DRA7xx and AM57xx variants. Confirm availability in
+ * the data manual for the exact part number in use
+ * before enabling these nodes in the board dts file.
+ */
+ ocmcram2: ocmcram@40400000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40400000 0x100000>;
+ ranges = <0x0 0x40400000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ ocmcram3: ocmcram@40500000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40500000 0x100000>;
+ ranges = <0x0 0x40500000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ dsp1_system: dsp_system@40d00000 {
+ compatible = "syscon";
+ reg = <0x40d00000 0x100>;
+ };
+
+ dra7_iodelay_core: padconf@4844a000 {
+ compatible = "ti,dra7-iodelay";
+ reg = <0x4844a000 0x0d1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ };
+
+ target-module@43300000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x43300000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43300000 0x100000>;
+
+ edma: dma@0 {
+ compatible = "ti,edma3-tpcc";
+ reg = <0 0x100000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_ccint", "edma3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <20 21>;
+ * for example. Note that these channels need to be
+ * masked in the xbar as well.
+ */
+ };
+ };
+
+ target-module@43400000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x43400000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43400000 0x100000>;
+
+ edma_tptc0: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ target-module@43500000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x43500000 0x4>;
+ reg-names = "rev";
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x43500000 0x100000>;
+
+ edma_tptc1: dma@0 {
+ compatible = "ti,edma3-tptc";
+ reg = <0 0x100000>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma3_tcerrint";
+ };
+ };
+
+ dmm@4e000000 {
+ compatible = "ti,omap5-dmm";
+ reg = <0x4e000000 0x800>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "dmm";
+ };
+
+ ipu1: ipu@58820000 {
+ compatible = "ti,dra7-ipu";
+ reg = <0x58820000 0x10000>;
+ reg-names = "l2ram";
+ iommus = <&mmu_ipu1>;
+ status = "disabled";
+ resets = <&prm_ipu 0>, <&prm_ipu 1>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ firmware-name = "dra7-ipu1-fw.xem4";
+ };
+
+ ipu2: ipu@55020000 {
+ compatible = "ti,dra7-ipu";
+ reg = <0x55020000 0x10000>;
+ reg-names = "l2ram";
+ iommus = <&mmu_ipu2>;
+ status = "disabled";
+ resets = <&prm_core 0>, <&prm_core 1>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ firmware-name = "dra7-ipu2-fw.xem4";
+ };
+
+ dsp1: dsp@40800000 {
+ compatible = "ti,dra7-dsp";
+ reg = <0x40800000 0x48000>,
+ <0x40e00000 0x8000>,
+ <0x40f00000 0x8000>;
+ reg-names = "l2ram", "l1pram", "l1dram";
+ ti,bootreg = <&scm_conf 0x55c 10>;
+ iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+ status = "disabled";
+ resets = <&prm_dsp1 0>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ firmware-name = "dra7-dsp1-fw.xe66";
+ };
+
+ target-module@40d01000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d01000 0x4>,
+ <0x40d01010 0x4>,
+ <0x40d01014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d01000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu0_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ };
+ };
+
+ target-module@40d02000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x40d02000 0x4>,
+ <0x40d02010 0x4>,
+ <0x40d02014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_dsp1 1>;
+ reset-names = "rstctrl";
+ ranges = <0x0 0x40d02000 0x1000>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ mmu1_dsp1: mmu@0 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ };
+ };
+
+ target-module@58882000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58882000 0x4>,
+ <0x58882010 0x4>,
+ <0x58882014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_ipu 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x58882000 0x100>;
+
+ mmu_ipu1: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ target-module@55082000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x55082000 0x4>,
+ <0x55082010 0x4>,
+ <0x55082014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+ clock-names = "fck";
+ resets = <&prm_core 2>;
+ reset-names = "rstctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x55082000 0x100>;
+
+ mmu_ipu2: mmu@0 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ };
+ };
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+ <0x4ae06014 0x4>, <0x4a003b20 0xc>,
+ <0x4ae0c158 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_ivahd: regulator-abb-ivahd {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_ivahd";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
+ <0x4a002470 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x40000000>;
+ /* LDOVBBIVA_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBIVA_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_dspeve: regulator-abb-dspeve {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_dspeve";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
+ <0x4a00246c 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x20000000>;
+ /* LDOVBBDSPEVE_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBDSPEVE_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_gpu: regulator-abb-gpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_gpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+ <0x4ae06010 0x4>, <0x4a003b08 0xc>,
+ <0x4ae0c154 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x10000000>;
+ /* LDOVBBGPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBGPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1090000 0 0x0 0 0x02000000 0x01F00000
+ 1210000 0 0x4 0 0x02000000 0x01F00000
+ 1280000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ qspi: spi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>;
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "qspi";
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+ clock-names = "fck";
+ num-cs = <4>;
+ interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ /* OCP2SCP3 */
+ sata: sata@4a141100 {
+ compatible = "snps,dwc-ahci";
+ reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+ ti,hwmods = "sata";
+ ports-implemented = <0x1>;
+ };
+
+ /* OCP2SCP1 */
+ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x50000000 0x37c>; /* device IO registers */
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 4 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
+
+ target-module@56000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5600fe00 0x4>,
+ <0x5600fe10 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x56000000 0x2000000>;
+ };
+
+ crossbar_mpu: crossbar@4a002a48 {
+ compatible = "ti,irq-crossbar";
+ reg = <0x4a002a48 0x130>;
+ interrupt-controller;
+ interrupt-parent = <&wakeupgen>;
+ #interrupt-cells = <3>;
+ ti,max-irqs = <160>;
+ ti,max-crossbar-sources = <MAX_SOURCES>;
+ ti,reg-size = <2>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+ ti,irqs-skip = <10 133 139 140>;
+ ti,irqs-safe-map = <0>;
+ };
+
+ target-module@58000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x58000000 4>,
+ <0x58000014 4>;
+ reg-names = "rev", "syss";
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
+ <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
+ <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+ clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x58000000 0x800000>;
+
+ dss: dss@0 {
+ compatible = "ti,dra7-dss";
+ /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+ /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
+ status = "disabled";
+ /* CTRL_CORE_DSS_PLL_CONTROL */
+ syscon-pll-ctrl = <&scm_conf 0x538>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x800000>;
+
+ target-module@1000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x1000 0x4>,
+ <0x1010 0x4>,
+ <0x1014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+ SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,syss-mask = <1>;
+ clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000 0x1000>;
+
+ dispc@0 {
+ compatible = "ti,dra7-dispc";
+ reg = <0 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck";
+ /* CTRL_CORE_SMA_SW_1 */
+ syscon-pol = <&scm_conf 0x534>;
+ };
+ };
+
+ target-module@40000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x40000 0x4>,
+ <0x40010 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+ clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+ clock-names = "fck", "dss_clk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x40000 0x40000>;
+
+ hdmi: encoder@0 {
+ compatible = "ti,dra7-hdmi";
+ reg = <0 0x200>,
+ <0x200 0x80>,
+ <0x300 0x80>,
+ <0x20000 0x19000>;
+ reg-names = "wp", "pll", "phy", "core";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+ clock-names = "fck", "sys_clk";
+ dmas = <&sdma_xbar 76>;
+ dma-names = "audio_tx";
+ };
+ };
+ };
+ };
+
+ aes1_target: target-module@4b500000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b500080 0x4>,
+ <0x4b500084 0x4>,
+ <0x4b500088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b500000 0x1000>;
+
+ aes1: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ aes2_target: target-module@4b700000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x4b700080 0x4>,
+ <0x4b700084 0x4>,
+ <0x4b700088 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b700000 0x1000>;
+
+ aes2: aes@0 {
+ compatible = "ti,omap4-aes";
+ reg = <0 0xa0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ sham_target: target-module@4b101000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x4b101100 0x4>,
+ <0x4b101110 0x4>,
+ <0x4b101114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x4b101000 0x1000>;
+
+ sham: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 119 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ opp_supply_mpu: opp-supply@4a003b20 {
+ compatible = "ti,omap5-opp-supply";
+ reg = <0x4a003b20 0xc>;
+ ti,efuse-settings = <
+ /* uV offset */
+ 1060000 0x0
+ 1160000 0x4
+ 1210000 0x8
+ >;
+ ti,absolute-max-voltage-uv = <1500000>;
+ };
+
+ };
+
+ thermal_zones: thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ #include "dra7-dspeve-thermal.dtsi"
+ #include "dra7-iva-thermal.dtsi"
+ };
+
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
+ coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+ coefficients = <0 2000>;
+};
+
+&core_thermal {
+ coefficients = <0 2000>;
+};
+
+&dspeve_thermal {
+ coefficients = <0 2000>;
+};
+
+&iva_thermal {
+ coefficients = <0 2000>;
+};
+
+&cpu_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&core_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&gpu_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&dspeve_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+&iva_crit {
+ temperature = <120000>; /* milli Celsius */
+};
+
+#include "dra7-l4.dtsi"
+#include "dra7xx-clocks.dtsi"
+
+&prm {
+ prm_dsp1: prm@400 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x400 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_ipu: prm@500 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x500 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_core: prm@700 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x700 0x100>;
+ #reset-cells = <1>;
+ };
+
+ prm_iva: prm@f00 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0xf00 0x100>;
+ };
+
+ prm_dsp2: prm@1b00 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b00 0x40>;
+ #reset-cells = <1>;
+ };
+
+ prm_eve1: prm@1b40 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b40 0x40>;
+ };
+
+ prm_eve2: prm@1b80 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1b80 0x40>;
+ };
+
+ prm_eve3: prm@1bc0 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1bc0 0x40>;
+ };
+
+ prm_eve4: prm@1c00 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c00 0x60>;
+ };
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+ };
+};
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer15_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
+
+&timer16_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
+ assigned-clock-parents = <&timer_sys_clk_div>;
+ };
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:17:13 +0000