1 files changed, 118 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
new file mode 100644
index 000000000..ad7a08502
--- /dev/null
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ */
+/dts-v1/;
+#include "at91sam9xe.dtsi"
+
+/ {
+	model = "Ethernut 5";
+	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x08000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		ebi: ebi@10000000 {
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs>;
+				pinctrl-names = "default";
+
+				nand: nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						root@0 {
+							label = "root";
+							reg = <0x0 0x08000000>;
+						};
+
+						data@20000 {
+							label = "data";
+							reg = <0x08000000 0x38000000>;
+						};
+					};
+				};
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		pcf8563@50 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+};