diff options
Diffstat (limited to 'arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 505 |
1 files changed, 505 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi new file mode 100644 index 000000000..099ed4384 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -0,0 +1,505 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> + * Anand Moon <linux.amoon@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include "exynos5422-odroid-core.dtsi" + +/ { + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key>; + + power_key { + /* + * The power button (SW2) is connected to the PWRON + * pin (active high) of the S2MPS11 PMIC, which acts + * as a 16ms debouce filter and signal inverter with + * output on ONOB pin (active low). ONOB PMIC pin is + * then connected to XEINT3 SoC pin. + */ + gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <0>; + wakeup-source; + }; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 20972 0>; + #cooling-cells = <2>; + cooling-levels = <0 130 170 230>; + }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu0_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu0_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu0_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu0_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + /* + * Exynos542x supports only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu0_alert2 + */ + cpu0_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu0_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu0_alert2>; + cooling-device = <&fan0 2 3>; + }; + /* + * When reaching cpu0_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * (usually) be: 1800 MHz and 1200 MHz. + */ + map3 { + trip = <&cpu0_alert3>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + /* + * When reaching cpu0_alert4, reduce CPU + * further, down to 600 MHz (14 steps for big, + * 8 steps for LITTLE). + */ + cpu0_cooling_map4: map4 { + trip = <&cpu0_alert4>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; + }; + }; + }; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu1_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu1_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu1_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu1_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu1_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu1_alert3>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + cpu1_cooling_map4: map4 { + trip = <&cpu1_alert4>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; + }; + }; + }; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu2_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu2_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu2_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu2_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu2_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu2_alert3>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + cpu2_cooling_map4: map4 { + trip = <&cpu2_alert4>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; + }; + }; + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu3_alert0: cpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert1: cpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_alert2: cpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + cpu3_crit0: cpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + cpu3_alert3: cpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + cpu3_alert4: cpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu3_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&cpu3_alert3>; + cooling-device = <&cpu0 0 2>, + <&cpu1 0 2>, + <&cpu2 0 2>, + <&cpu3 0 2>, + <&cpu4 0 2>, + <&cpu5 0 2>, + <&cpu6 0 2>, + <&cpu7 0 2>; + }; + cpu3_cooling_map4: map4 { + trip = <&cpu3_alert4>; + cooling-device = <&cpu0 3 8>, + <&cpu1 3 8>, + <&cpu2 3 8>, + <&cpu3 3 8>, + <&cpu4 3 14>, + <&cpu5 3 14>, + <&cpu6 3 14>, + <&cpu7 3 14>; + }; + }; + }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert2: gpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + gpu_alert3: gpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + gpu_alert4: gpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&gpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&gpu_alert3>; + cooling-device = <&gpu 0 2>; + }; + map4 { + trip = <&gpu_alert4>; + cooling-device = <&gpu 3 6>; + }; + }; + }; + }; +}; + +&buck10_reg { + /* Supplies vmmc-supply of mmc_0 */ + regulator-always-on; + regulator-boot-on; +}; + +&hdmi { + status = "okay"; + ddc = <&i2c_2>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; +}; + +&hdmicec { + status = "okay"; + needs-hpd; +}; + +&i2c_2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + /* used by HDMI DDC */ + status = "okay"; +}; + +&ldo26_reg { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + +&mixer { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + max-frequency = <200000000>; + vmmc-supply = <&ldo18_reg>; + vqmmc-supply = <&ldo3_reg>; +}; + +&pinctrl_0 { + power_key: power-key { + samsung,pins = "gpx0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&pinctrl_1 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; |