diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi new file mode 100644 index 000000000..c4e146f33 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +// +// Copyright (C) 2018 emtrion GmbH +// + +/ { + aliases { + boardid = &boardid; + mmc0 = &usdhc3; + mmc1 = &usdhc2; + mmc2 = &usdhc1; + mmc3 = &usdhc4; + }; + + reg_wall_5p0: reg-wall5p0 { + compatible = "regulator-fixed"; + regulator-name = "Main-Supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base3p3: reg-base3p3 { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "3V3-avari"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_base1p5: reg-base1p5 { + compatible = "regulator-fixed"; + vin-supply = <®_base3p3>; + regulator-name = "1V5-avari"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_usb_otg: reg-otgvbus { + compatible = "regulator-fixed"; + vin-supply = <®_wall_5p0>; + regulator-name = "OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + + clk_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "emCON-avari-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&ecspi2 { + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_codec>; + VDDA-supply = <®_base3p3>; + VDDIO-supply = <®_base3p3>; + }; + + captouch: touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + wakeup-source; + }; + + boardid: gpio@3a { + compatible = "nxp,pca8574"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pcie { + status = "okay"; +}; + +&rgb_encoder { + status = "okay"; +}; + +&rgb_panel { + compatible = "edt,etm0700g0bdh6"; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart2 { + status = "okay"; + uart-has-rtscts; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc1 { + status = "okay"; +}; |