diff options
Diffstat (limited to 'arch/arm/boot/dts/imx7ulp.dtsi')
-rw-r--r-- | arch/arm/boot/dts/imx7ulp.dtsi | 461 |
1 files changed, 461 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi new file mode 100644 index 000000000..bcec98b96 --- /dev/null +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng <aisheng.dong@nxp.com> + */ + +#include <dt-bindings/clock/imx7ulp-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx7ulp-pinfunc.h" + +/ { + interrupt-parent = <&intc>; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio_ptc; + gpio1 = &gpio_ptd; + gpio2 = &gpio_pte; + gpio3 = &gpio_ptf; + i2c0 = &lpi2c6; + i2c1 = &lpi2c7; + mmc0 = &usdhc0; + mmc1 = &usdhc1; + serial0 = &lpuart4; + serial1 = &lpuart5; + serial2 = &lpuart6; + serial3 = &lpuart7; + usbphy0 = &usbphy1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + }; + }; + + intc: interrupt-controller@40021000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40021000 0x1000>, + <0x40022000 0x1000>; + }; + + rosc: clock-rosc { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "rosc"; + #clock-cells = <0>; + }; + + sosc: clock-sosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "sosc"; + #clock-cells = <0>; + }; + + sirc: clock-sirc { + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-output-names = "sirc"; + #clock-cells = <0>; + }; + + firc: clock-firc { + compatible = "fixed-clock"; + clock-frequency = <48000000>; + clock-output-names = "firc"; + #clock-cells = <0>; + }; + + upll: clock-upll { + compatible = "fixed-clock"; + clock-frequency = <480000000>; + clock-output-names = "upll"; + #clock-cells = <0>; + }; + + ahbbridge0: bus@40000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40000000 0x800000>; + ranges; + + edma1: dma-controller@40080000 { + #dma-cells = <2>; + compatible = "fsl,imx7ulp-edma"; + reg = <0x40080000 0x2000>, + <0x40210000 0x1000>; + dma-channels = <32>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dma", "dmamux0"; + clocks = <&pcc2 IMX7ULP_CLK_DMA1>, + <&pcc2 IMX7ULP_CLK_DMA_MUX1>; + }; + + crypto: crypto@40240000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40240000 0x10000>; + ranges = <0 0x40240000 0x10000>; + clocks = <&pcc2 IMX7ULP_CLK_CAAM>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + lpuart4: serial@402d0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402d0000 0x1000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + assigned-clock-rates = <24000000>; + status = "disabled"; + }; + + lpuart5: serial@402e0000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x402e0000 0x1000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + clock-names = "ipg"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPUART5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + tpm4: pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm5: tpm@40260000 { + compatible = "fsl,imx7ulp-tpm"; + reg = <0x40260000 0x1000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&pcc2 IMX7ULP_CLK_LPTPM5>; + clock-names = "ipg", "per"; + }; + + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usb-phy@40350000 { + compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + + usdhc0: mmc@40370000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40370000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC0>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + status = "disabled"; + }; + + usdhc1: mmc@40380000 { + compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x40380000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&pcc2 IMX7ULP_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; + status = "disabled"; + }; + + scg1: clock-controller@403e0000 { + compatible = "fsl,imx7ulp-scg1"; + reg = <0x403e0000 0x10000>; + clocks = <&rosc>, <&sosc>, <&sirc>, + <&firc>, <&upll>; + clock-names = "rosc", "sosc", "sirc", + "firc", "upll"; + #clock-cells = <1>; + }; + + wdog1: watchdog@403d0000 { + compatible = "fsl,imx7ulp-wdt"; + reg = <0x403d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + timeout-sec = <40>; + }; + + pcc2: clock-controller@403f0000 { + compatible = "fsl,imx7ulp-pcc2"; + reg = <0x403f0000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", + "firc_bus_clk", "rosc", "spll_bus_clk"; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM5>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + }; + + smc1: clock-controller@40410000 { + compatible = "fsl,imx7ulp-smc1"; + reg = <0x40410000 0x1000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_CORE_DIV>, + <&scg1 IMX7ULP_CLK_HSRUN_CORE_DIV>; + clock-names = "divcore", "hsrun_divcore"; + }; + + pcc3: clock-controller@40b30000 { + compatible = "fsl,imx7ulp-pcc3"; + reg = <0x40b30000 0x10000>; + #clock-cells = <1>; + clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>, + <&scg1 IMX7ULP_CLK_NIC1_DIV>, + <&scg1 IMX7ULP_CLK_DDR_DIV>, + <&scg1 IMX7ULP_CLK_APLL_PFD2>, + <&scg1 IMX7ULP_CLK_APLL_PFD1>, + <&scg1 IMX7ULP_CLK_APLL_PFD0>, + <&scg1 IMX7ULP_CLK_UPLL>, + <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>, + <&scg1 IMX7ULP_CLK_ROSC>, + <&scg1 IMX7ULP_CLK_SPLL_BUS_CLK>; + clock-names = "nic1_bus_clk", "nic1_clk", "ddr_clk", + "apll_pfd2", "apll_pfd1", "apll_pfd0", + "upll", "sosc_bus_clk", + "firc_bus_clk", "rosc", "spll_bus_clk"; + }; + }; + + ahbbridge1: bus@40800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40800000 0x800000>; + ranges; + + lpi2c6: i2c@40a40000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a40000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpi2c7: i2c@40a50000 { + compatible = "fsl,imx7ulp-lpi2c"; + reg = <0x40a50000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPI2C7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart6: serial@40a60000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a60000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART6>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + lpuart7: serial@40a70000 { + compatible = "fsl,imx7ulp-lpuart"; + reg = <0x40a70000 0x1000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + clock-names = "ipg"; + assigned-clocks = <&pcc3 IMX7ULP_CLK_LPUART7>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC>; + assigned-clock-rates = <48000000>; + status = "disabled"; + }; + + memory-controller@40ab0000 { + compatible = "fsl,imx7ulp-mmdc", "fsl,imx6q-mmdc"; + reg = <0x40ab0000 0x1000>; + clocks = <&pcc3 IMX7ULP_CLK_MMDC>; + }; + + iomuxc1: pinctrl@40ac0000 { + compatible = "fsl,imx7ulp-iomuxc1"; + reg = <0x40ac0000 0x1000>; + }; + + gpio_ptc: gpio@40ae0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40ae0000 0x1000 0x400f0000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLC>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 0 20>; + }; + + gpio_ptd: gpio@40af0000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40af0000 0x1000 0x400f0040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLD>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 32 12>; + }; + + gpio_pte: gpio@40b00000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b00000 0x1000 0x400f0080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 64 16>; + }; + + gpio_ptf: gpio@40b10000 { + compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio"; + reg = <0x40b10000 0x1000 0x400f00c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>, + <&pcc3 IMX7ULP_CLK_PCTLF>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc1 0 96 20>; + }; + }; + + m4aips1: bus@41080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x41080000 0x80000>; + ranges; + + sim: sim@410a3000 { + compatible = "fsl,imx7ulp-sim", "syscon"; + reg = <0x410a3000 0x1000>; + }; + + ocotp: efuse@410a6000 { + compatible = "fsl,imx7ulp-ocotp", "syscon"; + reg = <0x410a6000 0x4000>; + clocks = <&scg1 IMX7ULP_CLK_DUMMY>; + }; + }; +}; |