diff options
Diffstat (limited to 'arch/arm/boot/dts/integratorap.dts')
| -rw-r--r-- | arch/arm/boot/dts/integratorap.dts | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts new file mode 100644 index 000000000..8600c0548 --- /dev/null +++ b/arch/arm/boot/dts/integratorap.dts @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for the ARM Integrator/AP platform + */ + +/dts-v1/; +#include "integrator.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "ARM Integrator/AP"; + compatible = "arm,integrator-ap"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + /* + * Since the board has pluggable CPU modules, we + * cannot define a proper compatible here. Let the + * boot loader fill in the apropriate compatible + * string if necessary. + */ + /* compatible = "arm,arm926ej-s"; */ + reg = <0>; + /* + * The documentation in ARM DUI 0138E page 3-12 states + * that the maximum frequency for this clock is 200 MHz + * but painful trial-and-error has proved to me that it + * is actually just hanging the system above 71 MHz. + * Sad but true. + */ + /* kHz uV */ + operating-points = <71000 0 + 66000 0 + 60000 0 + 48000 0 + 36000 0 + 24000 0 + 12000 0>; + clocks = <&cmosc>; + clock-names = "cpu"; + clock-latency = <1000000>; /* 1 ms */ + }; + }; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; + }; + + /* 24 MHz chrystal on the Integrator/AP development board */ + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + pclk: pclk@0 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + /* The UART clock is 14.74 MHz divided by an ICS525 */ + uartclk: uartclk@14.74M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <14745600>; + clocks = <&xtal24mhz>; + }; + + core-module@10000000 { + /* 24 MHz chrystal on the core module */ + cm24mhz: cm24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + /* Oscillator on the core module, clocks the CPU core */ + cmosc: cmosc@24M { + compatible = "arm,syscon-icst525-integratorap-cm"; + #clock-cells = <0>; + lock-offset = <0x14>; + vco-offset = <0x08>; + clocks = <&cm24mhz>; + }; + + /* Auxilary oscillator on the core module, 32.369MHz at boot */ + auxosc: auxosc@24M { + compatible = "arm,syscon-icst525"; + #clock-cells = <0>; + lock-offset = <0x14>; + vco-offset = <0x1c>; + clocks = <&cm24mhz>; + }; + }; + + syscon { + compatible = "arm,integrator-ap-syscon", "syscon"; + reg = <0x11000000 0x100>; + + /* + * SYSCLK clocks PCIv3 bridge, system controller and the + * logic modules. + */ + sysclk: apsys@24M { + compatible = "arm,syscon-icst525-integratorap-sys"; + #clock-cells = <0>; + lock-offset = <0x1c>; + vco-offset = <0x04>; + clocks = <&xtal24mhz>; + }; + + /* One-bit control for the PCI bus clock (33 or 25 MHz) */ + pciclk: pciclk@24M { + compatible = "arm,syscon-icst525-integratorap-pci"; + #clock-cells = <0>; + lock-offset = <0x1c>; + vco-offset = <0x04>; + clocks = <&xtal24mhz>; + }; + }; + + timer0: timer@13000000 { + compatible = "arm,integrator-timer"; + clocks = <&xtal24mhz>; + }; + + timer1: timer@13000100 { + compatible = "arm,integrator-timer"; + clocks = <&xtal24mhz>; + }; + + timer2: timer@13000200 { + compatible = "arm,integrator-timer"; + clocks = <&xtal24mhz>; + }; + + pic: pic@14000000 { + valid-mask = <0x003fffff>; + }; + + pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + /* Bridge registers and config access space */ + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = <0x01000000 0 0x0000000 /* I/O space @00000000 */ + 0x60000000 0 0x00010000 /* 64 KB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; + }; + + fpga { + /* + * The Integator/AP predates the idea to have magic numbers + * identifying the PrimeCell in hardware, thus we have to + * supply these from the device tree. + */ + rtc: rtc@15000000 { + compatible = "arm,pl030", "arm,primecell"; + arm,primecell-periphid = <0x00041030>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + uart0: uart@16000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart1: uart@17000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + clocks = <&uartclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + kmi0: kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi1: kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + }; + + /* + * Logic module bus, we support up to 4 logical modules + * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000 + * and use interrupts 9, 10, 11 and 12 respectively. + */ + bus@c0000000 { + compatible = "arm,integrator-ap-lm"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xc0000000 0xc0000000 0x40000000>; + dma-ranges; + + lm0: bus@c0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xc0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xc0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm1: bus@d0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xd0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xd0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm2: bus@e0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xe0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xe0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + lm3: bus@f0000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf0000000 0x10000000>; + dma-ranges = <0x00000000 0x80000000 0x10000000>; + reg = <0xf0000000 0x10000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; |