diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b.dtsi')
-rw-r--r-- | arch/arm/boot/dts/meson8b.dtsi | 640 |
1 files changed, 640 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi new file mode 100644 index 000000000..af2454c9f --- /dev/null +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -0,0 +1,640 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + */ + +#include <dt-bindings/clock/meson8-ddr-clkc.h> +#include <dt-bindings/clock/meson8b-clkc.h> +#include <dt-bindings/gpio/meson8b-gpio.h> +#include <dt-bindings/power/meson8-power.h> +#include <dt-bindings/reset/amlogic,meson8b-reset.h> +#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h> +#include "meson.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x200>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + + cpu1: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x201>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + + cpu2: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x202>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + + cpu3: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x203>; + enable-method = "amlogic,meson8b-smp"; + resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <860000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <860000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <860000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <860000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <860000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <860000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <860000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1140000>; + }; + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <1140000>; + }; + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <1140000>; + }; + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-microvolt = <1140000>; + }; + }; + + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-255000000 { + opp-hz = /bits/ 64 <255000000>; + opp-microvolt = <1100000>; + }; + opp-364285714 { + opp-hz = /bits/ 64 <364285714>; + opp-microvolt = <1100000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1100000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1100000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1100000>; + turbo-mode; + }; + }; + + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; + }; + }; + + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + ddr_clkc: clock-controller@400 { + compatible = "amlogic,meson8b-ddr-clkc"; + reg = <0x400 0x20>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,meson8b-canvas", + "amlogic,canvas"; + reg = <0x48 0x14>; + }; + }; + }; + + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8b-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + }; + }; +}; /* end of / */ + +&aobus { + pmu: pmu@e0 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xe0 0x18>; + }; + + pinctrl_aobus: pinctrl@84 { + compatible = "amlogic,meson8b-aobus-pinctrl"; + reg = <0x84 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio_ao: ao-bank@14 { + reg = <0x14 0x4>, + <0x2c 0x4>, + <0x24 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 16>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + bias-disable; + }; + }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + bias-disable; + }; + }; + }; +}; + +&cbus { + reset: reset-controller@4404 { + compatible = "amlogic,meson8b-reset"; + reg = <0x4404 0x9c>; + #reset-cells = <1>; + }; + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8b-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + clock-measure@8758 { + compatible = "amlogic,meson8b-clk-measure"; + reg = <0x8758 0x1c>; + }; + + pinctrl_cbus: pinctrl@9880 { + compatible = "amlogic,meson8b-cbus-pinctrl"; + reg = <0x9880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@80b0 { + reg = <0x80b0 0x28>, + <0x80e8 0x18>, + <0x8120 0x18>, + <0x8030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 83>; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_tx_clk", + "eth_tx_en", + "eth_txd1_0", + "eth_txd0_0", + "eth_rx_clk", + "eth_rx_dv", + "eth_rxd1", + "eth_rxd0", + "eth_mdio_en", + "eth_mdc", + "eth_ref_clk", + "eth_txd2", + "eth_txd3", + "eth_rxd3", + "eth_rxd2"; + function = "ethernet"; + bias-disable; + }; + }; + + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_tx_en", + "eth_txd1_0", + "eth_txd0_0", + "eth_rx_clk", + "eth_rx_dv", + "eth_rxd1", + "eth_rxd0", + "eth_mdio_en", + "eth_mdc"; + function = "ethernet"; + bias-disable; + }; + }; + + i2c_a_pins: i2c-a { + mux { + groups = "i2c_sda_a", "i2c_sck_a"; + function = "i2c_a"; + bias-disable; + }; + }; + + sd_b_pins: sd-b { + mux { + groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", + "sd_d3_b", "sd_clk_b", "sd_cmd_b"; + function = "sd_b"; + bias-disable; + }; + }; + + sdxc_c_pins: sdxc-c { + mux { + groups = "sdxc_d0_c", "sdxc_d13_c", + "sdxc_d47_c", "sdxc_clk_c", + "sdxc_cmd_c"; + function = "sdxc_c"; + bias-pull-up; + }; + }; + + pwm_c1_pins: pwm-c1 { + mux { + groups = "pwm_c1"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_pins: pwm-d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + bias-disable; + }; + }; + + uart_b0_pins: uart-b0 { + mux { + groups = "uart_tx_b0", + "uart_rx_b0"; + function = "uart_b"; + bias-disable; + }; + }; + + uart_b0_cts_rts_pins: uart-b0-cts-rts { + mux { + groups = "uart_cts_b0", + "uart_rts_b0"; + function = "uart_b"; + bias-disable; + }; + }; + }; +}; + +&ahb_sram { + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; +}; + + +&efuse { + compatible = "amlogic,meson8b-efuse"; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; +}; + +ðmac { + compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; + + reg = <0xc9410000 0x10000 + 0xc1108140 0x4>; + + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; + + power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>; +}; + +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson8b-gpio-intc"; + status = "okay"; +}; + +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8b-clkc"; + clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>; + clock-names = "xtal", "ddr_pll"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pwrc: power-controller { + compatible = "amlogic,meson8b-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&pmu>; + resets = <&reset RESET_DBLK>, + <&reset RESET_PIC_DC>, + <&reset RESET_HDMI_APB>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC_4>, + <&reset RESET_VENCL>, + <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_RDMA>; + reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", + "venci", "vencp", "vdac", "vencl", "viu", + "venc", "rdma"; + clocks = <&clkc CLKID_VPU>; + clock-names = "vpu"; + assigned-clocks = <&clkc CLKID_VPU>; + assigned-clock-rates = <182142857>; + }; +}; + +&hwrng { + compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + +&i2c_AO { + clocks = <&clkc CLKID_CLK81>; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&L2 { + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + arm,filter-ranges = <0x100000 0xc0000000>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,shared-override; +}; + +&periph { + scu@0 { + compatible = "arm,cortex-a5-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a5-global-timer"; + reg = <0x200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a5-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + +&pwm_ab { + compatible = "amlogic,meson8b-pwm"; +}; + +&pwm_cd { + compatible = "amlogic,meson8b-pwm"; +}; + +&rtc { + compatible = "amlogic,meson8b-rtc"; + resets = <&reset RESET_RTC>; +}; + +&saradc { + compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; + clocks = <&xtal>, <&clkc CLKID_SAR_ADC>; + clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; +}; + +&sdhc { + compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc"; + clocks = <&xtal>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV5>, + <&clkc CLKID_SDHC>; + clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; +}; + +&sdio { + compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; +}; + +&timer_abcde { + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + +&uart_AO { + compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart"; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_A { + compatible = "amlogic,meson8b-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + compatible = "amlogic,meson8b-uart"; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + compatible = "amlogic,meson8b-uart"; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; +}; + +&usb0 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; + +&usb1_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; + +&wdt { + compatible = "amlogic,meson8b-wdt"; +}; |