diff options
Diffstat (limited to 'arch/arm/boot/dts/motorola-mapphone-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/motorola-mapphone-common.dtsi | 877 |
1 files changed, 877 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi new file mode 100644 index 000000000..f9392a135 --- /dev/null +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -0,0 +1,877 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "omap443x.dtsi" +#include "motorola-cpcap-mapphone.dtsi" + +/ { + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* Poweroff GPIO probably connected to CPCAP */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_gpio>; + pinctrl-names = "default"; + gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; /* gpio50 */ + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + pinctrl-0 = <&hdmi_hpd_gpio>; + pinctrl-names = "default"; + label = "hdmi"; + type = "d"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + + /* + * HDMI 5V regulator probably sourced from battery. Let's keep + * keep this as always enabled for HDMI to work until we've + * figured what the encoder chip is. + */ + hdmi_regulator: regulator-hdmi { + compatible = "regulator-fixed"; + regulator-name = "hdmi"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio59 */ + enable-active-high; + regulator-always-on; + }; + + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-names = "default"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; + + /* This is probably coming straight from the battery.. */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + gpio_keys { + compatible = "gpio-keys"; + + volume_down { + label = "Volume Down"; + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */ + linux,code = <KEY_VOLUMEDOWN>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + + slider { + label = "Keypad Slide"; + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */ + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + linux,can-disable; + /* Value above 7.95ms for no GPIO hardware debounce */ + debounce-interval = <10>; + }; + }; + + soundcard { + compatible = "audio-graph-card"; + label = "Droid 4 Audio"; + + widgets = + "Speaker", "Earpiece", + "Speaker", "Loudspeaker", + "Headphone", "Headphone Jack", + "Microphone", "Internal Mic"; + + routing = + "Earpiece", "EP", + "Loudspeaker", "SPKR", + "Headphone Jack", "HSL", + "Headphone Jack", "HSR", + "MICR", "Internal Mic"; + + dais = <&mcbsp2_port>, <&mcbsp3_port>; + }; + + pwm8: pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; +}; + +&cpu_thermal { + polling-delay = <10000>; /* milliseconds */ +}; + +&cpu_alert0 { + temperature = <80000>; /* millicelsius */ +}; + +&cpu0 { + /* + * Note that the 1.2GiHz mode is enabled for all SoC variants for + * the Motorola Android Linux v3.0.8 based kernel. + */ + operating-points = < + /* kHz uV */ + 300000 1025000 + 600000 1200000 + 800000 1313000 + 1008000 1375000 + 1200000 1375000 + >; +}; + +&dss { + status = "okay"; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + + backlight = <&backlight>; + + width-mm = <50>; + height-mm = <89>; + rotation = <90>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; + +&hdmi { + status = "okay"; + pinctrl-0 = <&dss_hdmi_pins>; + pinctrl-names = "default"; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + lanes = <1 0 3 2 5 4 7 6>; + }; + }; +}; + +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + +&i2c1 { + tmp105@48 { + compatible = "ti,tmp105"; + reg = <0x48>; + pinctrl-0 = <&tmp105_irq>; + pinctrl-names = "default"; + /* kpd_row0.gpio_178 */ + interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING + &omap4_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + + /* Row 1 */ + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 6, KEY_2) + MATRIX_KEY(2, 3, KEY_3) + MATRIX_KEY(0, 7, KEY_4) + MATRIX_KEY(0, 4, KEY_5) + MATRIX_KEY(5, 5, KEY_6) + MATRIX_KEY(0, 1, KEY_7) + MATRIX_KEY(0, 5, KEY_8) + MATRIX_KEY(0, 0, KEY_9) + MATRIX_KEY(1, 6, KEY_0) + + /* Row 2 */ + MATRIX_KEY(3, 4, KEY_APOSTROPHE) + MATRIX_KEY(7, 6, KEY_Q) + MATRIX_KEY(7, 7, KEY_W) + MATRIX_KEY(7, 2, KEY_E) + MATRIX_KEY(1, 0, KEY_R) + MATRIX_KEY(4, 4, KEY_T) + MATRIX_KEY(1, 2, KEY_Y) + MATRIX_KEY(6, 7, KEY_U) + MATRIX_KEY(2, 2, KEY_I) + MATRIX_KEY(5, 6, KEY_O) + MATRIX_KEY(3, 7, KEY_P) + MATRIX_KEY(6, 5, KEY_BACKSPACE) + + /* Row 3 */ + MATRIX_KEY(5, 4, KEY_TAB) + MATRIX_KEY(5, 7, KEY_A) + MATRIX_KEY(2, 7, KEY_S) + MATRIX_KEY(7, 0, KEY_D) + MATRIX_KEY(2, 6, KEY_F) + MATRIX_KEY(6, 2, KEY_G) + MATRIX_KEY(6, 6, KEY_H) + MATRIX_KEY(1, 4, KEY_J) + MATRIX_KEY(3, 1, KEY_K) + MATRIX_KEY(2, 1, KEY_L) + MATRIX_KEY(4, 6, KEY_ENTER) + + /* Row 4 */ + MATRIX_KEY(3, 6, KEY_LEFTSHIFT) /* KEY_CAPSLOCK */ + MATRIX_KEY(6, 1, KEY_Z) + MATRIX_KEY(7, 4, KEY_X) + MATRIX_KEY(5, 1, KEY_C) + MATRIX_KEY(1, 7, KEY_V) + MATRIX_KEY(2, 4, KEY_B) + MATRIX_KEY(4, 1, KEY_N) + MATRIX_KEY(1, 1, KEY_M) + MATRIX_KEY(3, 5, KEY_COMMA) + MATRIX_KEY(5, 2, KEY_DOT) + MATRIX_KEY(6, 3, KEY_UP) + MATRIX_KEY(7, 3, KEY_OK) + + /* Row 5 */ + MATRIX_KEY(2, 5, KEY_LEFTCTRL) /* KEY_LEFTSHIFT */ + MATRIX_KEY(4, 5, KEY_LEFTALT) /* SYM */ + MATRIX_KEY(6, 0, KEY_MINUS) + MATRIX_KEY(4, 7, KEY_EQUAL) + MATRIX_KEY(1, 5, KEY_SPACE) + MATRIX_KEY(3, 2, KEY_SLASH) + MATRIX_KEY(4, 3, KEY_LEFT) + MATRIX_KEY(5, 3, KEY_DOWN) + MATRIX_KEY(3, 3, KEY_RIGHT) + + /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */ + MATRIX_KEY(5, 0, KEY_VOLUMEUP) + >; +}; + +&mmc1 { + vmmc-supply = <&vwlan2>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */ +}; + +&mmc2 { + vmmc-supply = <&vsdio>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; + vmmc-supply = <&wl12xx_vmmc>; + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */ + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + interrupt-names = "irq", "wakeup"; + non-removable; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1285"; + reg = <2>; + /* gpio_100 with gpmc_wait2 pad as wakeirq */ + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, + <&omap4_pmx_core 0x4e>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + + led@1 { + reg = <1>; + led-sources = <1>; + ti,led-mode = <0>; + label = ":kbd_backlight"; + }; + }; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + + /* hdmi_hpd.gpio_63 */ + hdmi_hpd_gpio: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) + >; + }; + + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + + /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) + >; + }; + + /* + * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3 + * for gpio_100, but the internal pull makes wlan flakey on some + * devices. Off mode value should be tested if we have off mode working + * later on. + */ + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + /* 0x4a10008e gpmc_wait2.gpio_100 d23 */ + OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3) + + /* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */ + OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */ + OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */ + OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1) + + /* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */ + OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */ + OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1) + >; + }; + + /* gpmc_ncs0.gpio_50 */ + poweroff_gpio: pinmux_poweroff_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: pinmux_tmp105_irq { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + touchscreen_pins: pinmux_touchscreen_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + als_proximity_pins: pinmux_als_proximity_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: pinmux_usb_mdm6600_pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: pinmux_usb_ulpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: pinmux_usb_utmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* + * Note that the v3.0.8 stock userspace dynamically remuxes uart1 + * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7 + * when not used. If needed, we can add rts pin remux later based + * on power measurements. + */ + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */ + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) + + /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */ + OMAP4_IOPAD(0x13e, MUX_MODE1) + + /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */ + OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1) + + /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */ + OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx */ + OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx */ + OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5) /* uart4_cts */ + OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5) /* uart4_rts */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx */ + OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_dr */ + OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0) /* abe_mcbsp2_dx */ + OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_dr */ + OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1) /* abe_mcbsp3_dx */ + OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ + OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ + >; + }; + + vibrator_direction_pin: pinmux_vibrator_direction_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: pinmux_vibrator_enable_pin { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +/* RNG is used by secure mode and not accessible */ +&rng_target { + status = "disabled"; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +/* + * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 + * for wake-up events for both the USB PHY and the UART. We can use gpio_149 + * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we + * have gpio_149 trigger before the UART transfer starts. + */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x110>; + uart-has-rtscts; + current-speed = <115200>; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; + overrun-throttle-ms = <500>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + + bluetooth { + compatible = "ti,wl1285-st"; + enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */ + max-speed = <3686400>; + }; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + + /* + * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4. + * VBUS Regulator Main Characteristics". Binding uses 2 mA units. + */ + power = <150>; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; + + lis3dh: accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */ + + rotation-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + +&mcbsp2 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; + + mcbsp2_port: port { + cpu_dai2: endpoint { + dai-format = "i2s"; + remote-endpoint = <&cpcap_audio_codec0>; + frame-master = <&cpcap_audio_codec0>; + bitclock-master = <&cpcap_audio_codec0>; + }; + }; +}; + +&mcbsp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; + status = "okay"; + + mcbsp3_port: port { + cpu_dai3: endpoint { + dai-format = "dsp_a"; + frame-master = <&cpcap_audio_codec1>; + bitclock-master = <&cpcap_audio_codec1>; + remote-endpoint = <&cpcap_audio_codec1>; + }; + }; +}; + +&cpcap_audio_codec0 { + remote-endpoint = <&cpu_dai2>; +}; + +&cpcap_audio_codec1 { + remote-endpoint = <&cpu_dai3>; +}; |