diff options
Diffstat (limited to 'arch/arm/boot/dts/omap3-evm-common.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/omap3-evm-common.dtsi | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi new file mode 100644 index 000000000..17c89df6c --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Common support for omap3 EVM boards + */ + +#include <dt-bindings/input/input.h> +#include "omap-gpmc-smsc911x.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; + regulator-name = "hsusb2_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; /* gpio_22 */ + startup-delay-us = <70000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + vcc-supply = <&hsusb2_power>; + #phy-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" +#include "omap3-panel-sharp-ls037v7dw01.dtsi" + +&backlight0 { + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; +}; + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&lcd_3v3 { + gpio = <&gpio5 25 GPIO_ACTIVE_LOW>; /* gpio153 */ +}; + +&lcd0 { + enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */ + reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */ + mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */ + &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */ + &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */ +}; + +&mcspi1 { + tsc2046@0 { + interrupt-parent = <&gpio6>; + interrupts = <15 0>; /* gpio175 */ + pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + vmmc-supply = <&vmmc1>; + vqmmc-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + interrupts-extended = <&intc 86 &omap3_pmx_core 0x12e>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + /* gpio_149 with uart1_rts pad as wakeirq */ + interrupts-extended = <&gpio5 21 IRQ_TYPE_EDGE_RISING>, + <&omap3_pmx_core 0x14e>; + interrupt-names = "irq", "wakeup"; + ref-clock-frequency = <38400000>; + }; +}; + +&twl_gpio { + ti,use-leds; +}; + +&twl_keypad { + linux,keymap = < + MATRIX_KEY(2, 2, KEY_1) + MATRIX_KEY(1, 1, KEY_2) + MATRIX_KEY(0, 0, KEY_3) + MATRIX_KEY(3, 2, KEY_4) + MATRIX_KEY(2, 1, KEY_5) + MATRIX_KEY(1, 0, KEY_6) + MATRIX_KEY(1, 3, KEY_7) + MATRIX_KEY(3, 1, KEY_8) + MATRIX_KEY(2, 0, KEY_9) + MATRIX_KEY(2, 3, KEY_KPASTERISK) + MATRIX_KEY(0, 2, KEY_0) + MATRIX_KEY(3, 0, KEY_KPDOT) + /* s4 not wired */ + MATRIX_KEY(1, 2, KEY_BACKSPACE) + MATRIX_KEY(0, 1, KEY_ENTER) + >; +}; + +&usbhshost { + port2-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&gpmc { + ethernet@gpmc { + interrupt-parent = <&gpio6>; + interrupts = <16 8>; + reg = <5 0 0xff>; + }; +}; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; |