summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/ste-snowball.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/ste-snowball.dts')
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts624
1 files changed, 624 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
new file mode 100644
index 000000000..f6e0d71f6
--- /dev/null
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2011 ST-Ericsson AB
+ */
+
+/dts-v1/;
+#include "ste-db9500.dtsi"
+#include "ste-href-ab8500.dtsi"
+#include "ste-href-family-pinctrl.dtsi"
+
+/ {
+ model = "Calao Systems Snowball platform with device tree";
+ compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ en_3v3_reg: en_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "en-3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
+ gpio = <&ab8500_gpio 25 0x4>;
+ startup-delay-us = <5000>;
+ enable-active-high;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ debounce-interval = <50>;
+ wakeup-source;
+ linux,code = <2>;
+ label = "userpb";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ };
+ button@2 {
+ debounce-interval = <50>;
+ wakeup-source;
+ linux,code = <3>;
+ label = "extkb1";
+ gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+ };
+ button@3 {
+ debounce-interval = <50>;
+ wakeup-source;
+ linux,code = <4>;
+ label = "extkb2";
+ gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ };
+ button@4 {
+ debounce-interval = <50>;
+ wakeup-source;
+ linux,code = <5>;
+ label = "extkb3";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ };
+ button@5 {
+ debounce-interval = <50>;
+ wakeup-source;
+ linux,code = <6>;
+ label = "extkb4";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioled_snowball_mode>;
+ used-led {
+ label = "user_led";
+ gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ soc {
+ /* Name the GPIO muxed rails on the Snowball board */
+ gpio@8012e000 {
+ /* GPIOs 0 - 31 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "AP_GPIO31";
+ };
+
+ gpio@8012e080 {
+ /* GPIOs 32 - 63 */
+ gpio-line-names = "USR PB", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e000 {
+ /* GPIOs 64 - 95 */
+ gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e100 {
+ /* GPIOs 128 - 159 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "IRQ_LAN", "RSTn_LAN",
+ "USR_LED", "", "", "", "", "", "",
+ "", "", "AP_GPIO151", "AP_GPIO152",
+ "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e180 {
+ /* GPIOs 160 - 191 */
+ gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
+ "ACCELEROMETER_INT1_RDY",
+ "ACCELEROMETER_INT2", "MAG_DRDY",
+ "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
+ "GYRO_INT", "UART_WAKE", "GBF_RESET",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8011e000 {
+ /* GPIOs 192 - 223 */
+ gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
+ "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "",
+ "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
+ "MMC_CD", "", "", "", "", "";
+ };
+
+ gpio@8011e080 {
+ /* GPIOs 224 - 255 */
+ gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ msp0: msp@80123000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
+ status = "okay";
+ };
+
+ msp1: msp@80124000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp1txrx_a_1_default>;
+ status = "okay";
+ };
+
+ msp2: msp@80117000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&msp2_a_1_default>;
+ };
+
+ msp3: msp@80125000 {
+ status = "okay";
+ };
+
+ external-bus@50000000 {
+ status = "okay";
+
+ ethernet@0 {
+ compatible = "smsc,lan9115";
+ reg = <0 0x10000>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio4>;
+ vdd33a-supply = <&en_3v3_reg>;
+ vddvario-supply = <&db8500_vape_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_snowball_mode>;
+
+ reg-shift = <1>;
+ reg-io-width = <2>;
+ smsc,force-internal-phy;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+
+ clocks = <&prcc_pclk 3 0>;
+ };
+ };
+
+ /* ST6G3244ME level translator for 1.8/2.9 V */
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ /* GPIO228 SD_SEL */
+ gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ /* GPIO217 MMC_EN */
+ enable-gpio = <&gpio6 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+ };
+
+ // External Micro SD slot
+ sdi0_per1@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ /* All direction control is used */
+ st,sig-dir-cmd;
+ st,sig-dir-dat0;
+ st,sig-dir-dat2;
+ st,sig-dir-dat31;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ vqmmc-supply = <&vmmci>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
+ pinctrl-1 = <&mc0_a_1_sleep>;
+
+ /* GPIO218 MMC_CD */
+ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+ };
+
+ // WLAN SDIO channel
+ sdi1_per2@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_1_default>;
+ pinctrl-1 = <&mc1_a_1_sleep>;
+
+ status = "okay";
+ };
+
+ // Unused PoP eMMC - register and put it to sleep by default */
+ sdi2_per3@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mc2_a_1_sleep>;
+
+ status = "okay";
+ };
+
+ // On-board eMMC
+ sdi4_per2@80114000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ vmmc-supply = <&ab8500_ldo_aux2_reg>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc4_a_1_default>;
+ pinctrl-1 = <&mc4_a_1_sleep>;
+
+ status = "okay";
+ };
+
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+ status = "okay";
+ };
+
+ /* This UART is unused and thus left disabled */
+ uart@80121000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
+ };
+
+ uart@80007000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ status = "okay";
+ };
+
+ i2c@80004000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+ status = "okay";
+ };
+
+ i2c@80122000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_b_2_default>;
+ pinctrl-1 = <&i2c1_b_2_sleep>;
+ status = "okay";
+ };
+
+ i2c@80128000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+ status = "okay";
+ lsm303dlh@18 {
+ /* Accelerometer */
+ compatible = "st,lsm303dlh-accel";
+ st,drdy-int-pin = <1>;
+ reg = <0x18>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&accel_snowball_mode>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
+ <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
+ };
+ lsm303dlh@1e {
+ /* Magnetometer */
+ compatible = "st,lsm303dlh-magn";
+ reg = <0x1e>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&magneto_snowball_mode>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
+ };
+ l3g4200d@68 {
+ /* Gyroscope */
+ compatible = "st,l3g4200d-gyro";
+ st,drdy-int-pin = <2>;
+ reg = <0x68>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gyro_snowball_mode>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+ <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
+ };
+ lsp001wm@5c {
+ /* Barometer/pressure sensor */
+ compatible = "st,lps001wp-press";
+ reg = <0x5c>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&db8500_vsmps2_reg>;
+ };
+ };
+
+ i2c@80110000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+ status = "okay";
+ };
+
+ spi@80002000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_snowball_mode>;
+ status = "okay";
+ };
+
+ prcmu@80157000 {
+ ab8500 {
+ ab8500-gpiocontroller {
+ /*
+ * AB8500 GPIOs are numbered starting from 1, so the first
+ * index 0 is what in the datasheet is called "GPIO1", and
+ * the second is "GPIO2" and so forth. Confusingly, the
+ * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
+ * while later naming "GPIO4" as "PM_GPIO4".
+ */
+ gpio-line-names = "", /* AB8500 GPIO1 */
+ "PM_GPIO1", /* AB8500 GPIO2 */
+ "WLAN_CLK_REQ", /* AB8500 GPIO3 */
+ "PM_GPIO4", /* AB8500 GPIO4 */
+ "", "", "", "", "", "", "", "", "", "", "",
+ "EN_3V6", /* AB8500 GPIO16 */
+ "", "", "", "" ,"", "", "", "", "",
+ "EN_3V3", /* AB8500 GPIO26 */
+ "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "PM_GPIO40", /* AB8500 GPIO40 */
+ "PM_GPIO41", /* AB8500 GPIO41 */
+ "PM_GPIO42"; /* AB8500 GPIO42 */
+ };
+
+ ab8500_usb {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ext_regulators: ab8500-ext-regulators {
+ ab8500_ext1_reg: ab8500_ext1 {
+ regulator-name = "ab8500-ext-supply1";
+ };
+
+ ab8500_ext2_reg_reg: ab8500_ext2 {
+ regulator-name = "ab8500-ext-supply2";
+ };
+
+ ab8500_ext3_reg_reg: ab8500_ext3 {
+ regulator-name = "ab8500-ext-supply3";
+ };
+ };
+
+ ab8500-regulators {
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-name = "V-DISPLAY";
+ };
+
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-name = "V-eMMC1";
+ };
+
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-name = "V-MMC-SD";
+ };
+
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ regulator-name = "V-INTCORE";
+ };
+
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-name = "V-TVOUT";
+ };
+
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-name = "V-AUD";
+ };
+
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-name = "V-AMIC1";
+ };
+
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ regulator-name = "V-AMIC2";
+ };
+
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-name = "V-DMIC";
+ };
+
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ /*
+ * Set this up using hogs, as time goes by and as seems fit, these
+ * can be moved over to being controlled by respective device.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gbf_snowball_mode>,
+ <&wlan_snowball_mode>;
+
+ ethernet {
+ /*
+ * Mux in "SM" which is used for the
+ * SMSC911x Ethernet adapter
+ */
+ eth_snowball_mode: eth_snowball {
+ snowball_mux {
+ function = "sm";
+ groups = "sm_b_1";
+ };
+ /* LAN IRQ pin */
+ snowball_cfg1 {
+ pins = "GPIO140_B11";
+ ste,config = <&in_nopull>;
+ };
+ /* LAN reset pin */
+ snowball_cfg2 {
+ pins = "GPIO141_C12";
+ ste,config = <&gpio_out_hi>;
+ };
+
+ };
+ };
+ sdi0 {
+ sdi0_default_mode: sdi0_default {
+ snowball_mux {
+ function = "mc0";
+ /* Add the DAT31 pin even if it is not really used */
+ groups = "mc0dat31dir_a_1";
+ };
+ snowball_cfg1 {
+ pins = "GPIO21_AB3"; /* DAT31DIR */
+ ste,config = <&out_hi>;
+ };
+ /* SD card detect GPIO pin, extend default state */
+ snowball_cfg2 {
+ pins = "GPIO218_AH11";
+ ste,config = <&gpio_in_pu>;
+ };
+ /* VMMCI level-shifter enable */
+ snowball_cfg3 {
+ pins = "GPIO217_AH12";
+ ste,config = <&gpio_out_hi>;
+ };
+ /* VMMCI level-shifter voltage select */
+ snowball_cfg4 {
+ pins = "GPIO228_AJ6";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ ssp0 {
+ ssp0_snowball_mode: ssp0_snowball_default {
+ snowball_mux {
+ function = "ssp0";
+ groups = "ssp0_a_1";
+ };
+ snowball_cfg1 {
+ pins = "GPIO144_B13"; /* FRM */
+ ste,config = <&gpio_out_hi>;
+ };
+ snowball_cfg2 {
+ pins = "GPIO145_C13"; /* RXD */
+ ste,config = <&in_pd>;
+ };
+ snowball_cfg3 {
+ pins =
+ "GPIO146_D13", /* TXD */
+ "GPIO143_D12"; /* CLK */
+ ste,config = <&out_lo>;
+ };
+
+ };
+ };
+ gpio_led {
+ gpioled_snowball_mode: gpioled_default {
+ snowball_cfg1 {
+ pins = "GPIO142_C11";
+ ste,config = <&gpio_out_hi>;
+ };
+
+ };
+ };
+ accelerometer {
+ accel_snowball_mode: accel_snowball {
+ /* Accelerometer lines */
+ snowball_cfg1 {
+ pins =
+ "GPIO163_C20", /* ACCEL_IRQ1 */
+ "GPIO164_B21"; /* ACCEL_IRQ2 */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ gyro {
+ gyro_snowball_mode: gyro_snowball {
+ snowball_cfg1 {
+ pins =
+ "GPIO166_A22", /* DRDY */
+ "GPIO169_D22"; /* INT */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ magnetometer {
+ magneto_snowball_mode: magneto_snowball {
+ snowball_cfg1 {
+ pins = "GPIO165_C21"; /* MAG_DRDY */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ gbf {
+ gbf_snowball_mode: gbf_snowball {
+ /*
+ * GBF (GPS, Bluetooth, FM-radio) interface,
+ * pull low to reset state
+ */
+ snowball_cfg1 {
+ pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ wlan {
+ wlan_snowball_mode: wlan_snowball {
+ /*
+ * Activate this mode with the WLAN chip.
+ * These are plain GPIO pins used by WLAN
+ */
+ snowball_cfg1 {
+ pins =
+ "GPIO161_D21", /* WLAN_PMU_EN */
+ "GPIO215_AH13"; /* WLAN_ENA */
+ ste,config = <&gpio_out_lo>;
+ };
+ snowball_cfg2 {
+ pins = "GPIO216_AG12"; /* WLAN_IRQ */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ };
+
+ mcde@a0350000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_default_mode>;
+ pinctrl-1 = <&lcd_sleep_mode>;
+ };
+ };
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:05:53 +0000