diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp157c-dk2.dts')
-rw-r--r-- | arch/arm/boot/dts/stm32mp157c-dk2.dts | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts new file mode 100644 index 000000000..045636555 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics. + */ + +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include "stm32mp15xx-dkx.dtsi" + +/ { + model = "STMicroelectronics STM32MP157C-DK2 Discovery Board"; + compatible = "st,stm32mp157c-dk2", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart7; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&dsi { + status = "okay"; + phy-dsi-supply = <®18>; + + ports { + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; + power-supply = <&v3v3>; + status = "okay"; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&i2c1 { + touchscreen@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupts = <2 2>; + interrupt-parent = <&gpiof>; + interrupt-controller; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + status = "okay"; + }; +}; + +<dc { + status = "okay"; + + port { + ltdc_ep1_out: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_c>; + pinctrl-1 = <&usart2_sleep_pins_c>; + pinctrl-2 = <&usart2_idle_pins_c>; + status = "disabled"; +}; |