diff options
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/sun6i-a31.dtsi | 1421 |
1 files changed, 1421 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi new file mode 100644 index 000000000..f3425a66f --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -0,0 +1,1421 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +#include <dt-bindings/clock/sun6i-a31-ccu.h> +#include <dt-bindings/reset/sun6i-a31-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &gmac; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + simplefb_hdmi: framebuffer-lcd0-hdmi { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-hdmi"; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>, + <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>, + <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>; + status = "disabled"; + }; + + simplefb_lcd: framebuffer-lcd0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + cpus { + enable-method = "allwinner,sun6i-a31"; + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + }; + }; + + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: clk-24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-accuracy = <50000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk-32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; + }; + + /* + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. + */ + mii_phy_tx_clk: clk-mii-phy-tx { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: clk-gmac-int-tx { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@1c200d0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c200d0 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + }; + + de: display-engine { + compatible = "allwinner,sun6i-a31-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@1c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DMA>; + resets = <&ccu RST_AHB1_DMA>; + #dma-cells = <1>; + }; + + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 11>; + resets = <&ccu RST_AHB1_LCD0>, + <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", + "lvds"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>, + <&ccu 15>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1", + "lvds-alt"; + clock-output-names = "tcon0-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + + tcon0_in_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 12>; + resets = <&ccu RST_AHB1_LCD1>, + <&ccu RST_AHB1_LVDS>; + reset-names = "lcd", "lvds"; + clocks = <&ccu CLK_AHB1_LCD1>, + <&ccu CLK_LCD1_CH0>, + <&ccu CLK_LCD1_CH1>, + <&ccu 15>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1", + "lvds-alt"; + clock-output-names = "tcon1-pixel-clock"; + #clock-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon1>; + }; + + tcon1_in_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ccu CLK_AHB1_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_AHB1_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@1c10000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ccu CLK_AHB1_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_AHB1_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@1c11000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ccu CLK_AHB1_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_AHB1_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc3: mmc@1c12000 { + compatible = "allwinner,sun7i-a20-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ccu CLK_AHB1_MMC3>, + <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ccu RST_AHB1_MMC3>; + reset-names = "ahb"; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun6i-a31-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; + resets = <&ccu RST_AHB1_HDMI>; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + dmas = <&dma 13>, <&dma 13>, <&dma 14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + usb_otg: usb@1c19000 { + compatible = "allwinner,sun6i-a31-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ccu CLK_AHB1_OTG>; + resets = <&ccu RST_AHB1_OTG>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + dr_mode = "otg"; + status = "disabled"; + }; + + usbphy: phy@1c19400 { + compatible = "allwinner,sun6i-a31-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@1c1a000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_EHCI0>; + resets = <&ccu RST_AHB1_EHCI0>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@1c1a400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_AHB1_OHCI0>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@1c1b000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_EHCI1>; + resets = <&ccu RST_AHB1_EHCI1>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@1c1b400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_AHB1_OHCI1>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@1c1c400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_AHB1_OHCI2>; + status = "disabled"; + }; + + ccu: clock@1c20000 { + compatible = "allwinner,sun6i-a31-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&rtc 0>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun6i-a31-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + gmac_gmii_pins: gmac-gmii-pins { + pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27"; + function = "gmac"; + /* + * data lines in GMII mode run at 125MHz and + * might need a higher signal drive strength + */ + drive-strength = <30>; + }; + + gmac_mii_pins: gmac-mii-pins { + pins = "PA0", "PA1", "PA2", "PA3", + "PA8", "PA9", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA26", "PA27"; + function = "gmac"; + }; + + gmac_rgmii_pins: gmac-rgmii-pins { + pins = "PA0", "PA1", "PA2", "PA3", + "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA25", "PA26", "PA27"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; + }; + + i2c0_pins: i2c0-pins { + pins = "PH14", "PH15"; + function = "i2c0"; + }; + + i2c1_pins: i2c1-pins { + pins = "PH16", "PH17"; + function = "i2c1"; + }; + + i2c2_pins: i2c2-pins { + pins = "PH18", "PH19"; + function = "i2c2"; + }; + + lcd0_rgb888_pins: lcd0-rgb888-pins { + pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; + }; + + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_4bit_pins: mmc2-4bit-pins { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins { + pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + function = "mmc3"; + drive-strength = <40>; + bias-pull-up; + }; + + spdif_tx_pin: spdif-tx-pin { + pins = "PH28"; + function = "spdif"; + }; + + uart0_ph_pins: uart0-ph-pins { + pins = "PH20", "PH21"; + function = "uart0"; + }; + }; + + timer@1c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt1: watchdog@1c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_APB1_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>; + resets = <&ccu RST_APB1_DAUDIO0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>; + resets = <&ccu RST_APB1_DAUDIO1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@1c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + rtp: rtp@1c25000 { + compatible = "allwinner,sun6i-a31-ts"; + reg = <0x01c25000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + }; + + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB2_UART0>; + resets = <&ccu RST_APB2_UART0>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB2_UART1>; + resets = <&ccu RST_APB2_UART1>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB2_UART2>; + resets = <&ccu RST_APB2_UART2>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB2_UART3>; + resets = <&ccu RST_APB2_UART3>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB2_UART4>; + resets = <&ccu RST_APB2_UART4>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@1c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_APB2_UART5>; + resets = <&ccu RST_APB2_UART5>; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB2_I2C0>; + resets = <&ccu RST_APB2_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB2_I2C1>; + resets = <&ccu RST_APB2_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB2_I2C2>; + resets = <&ccu RST_APB2_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@1c2b800 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB2_I2C3>; + resets = <&ccu RST_APB2_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac: ethernet@1c30000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c30000 0x1054>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ccu RST_AHB1_EMAC>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + crypto: crypto-engine@1c15000 { + compatible = "allwinner,sun6i-a31-crypto", + "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_AHB1_SS>; + reset-names = "ahb"; + }; + + codec: codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + resets = <&ccu RST_APB1_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + timer@1c60000 { + compatible = "allwinner,sun6i-a31-hstimer", + "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_HSTIMER>; + resets = <&ccu RST_AHB1_HSTIMER>; + }; + + spi0: spi@1c68000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + resets = <&ccu RST_AHB1_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c69000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + resets = <&ccu RST_AHB1_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi2: spi@1c6a000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6a000 0x1000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>; + clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; + resets = <&ccu RST_AHB1_SPI2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi3: spi@1c6b000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6b000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>; + clock-names = "ahb", "mod"; + dmas = <&dma 26>, <&dma 26>; + dma-names = "rx", "tx"; + resets = <&ccu RST_AHB1_SPI3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>, + <&ccu CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>, + <&ccu CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>, + <&ccu CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + drc1: drc@1e50000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e50000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>, + <&ccu CLK_DRAM_DRC1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc1>; + }; + + drc1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>, + <&ccu CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + reg = <1>; + + be0_out_drc0: endpoint { + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + reg = <0>; + + drc0_in_be0: endpoint { + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; + }; + }; + }; + + rtc: rtc@1f00000 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k"; + }; + + nmi_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c00 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + prcm@1f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&rtc 0>, <&osc24M>, + <&ccu CLK_PLL_PERIPH>, + <&ccu CLK_PLL_PERIPH>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + ir_clk: ir_clk { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + clocks = <&rtc 0>, <&osc24M>; + clock-output-names = "ir"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + + cpucfg@1f01c00 { + compatible = "allwinner,sun6i-a31-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + + ir: ir@1f02000 { + compatible = "allwinner,sun6i-a31-ir"; + clocks = <&apb0_gates 1>, <&ir_clk>; + clock-names = "apb", "ir"; + resets = <&apb0_rst 1>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@1f02c00 { + compatible = "allwinner,sun6i-a31-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; + clock-names = "apb", "hosc", "losc"; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + + s_ir_rx_pin: s-ir-rx-pin { + pins = "PL4"; + function = "s_ir"; + }; + + s_p2wi_pins: s-p2wi-pins { + pins = "PL0", "PL1"; + function = "s_p2wi"; + }; + }; + + p2wi: i2c@1f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&s_p2wi_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; |