1 files changed, 82 insertions, 0 deletions
diff --git a/arch/arm/include/debug/omap2plus.S b/arch/arm/include/debug/omap2plus.S
new file mode 100644
index 000000000..0680be6c7
--- /dev/null
+++ b/arch/arm/include/debug/omap2plus.S
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+*/
+
+#include <linux/serial_reg.h>
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define ZOOM_PORT_SHIFT		1
+
+#define UART_OFFSET(addr)	((addr) & 0x00ffffff)
+
+		.pushsection .data
+		.align	2
+omap_uart_phys:	.word	0
+omap_uart_virt:	.word	0
+omap_uart_lsr:	.word	0
+		.popsection
+
+		.macro	addruart, rp, rv, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+10:		adr	\rp, 99f		@ get effective addr of 99f
+		ldr	\rv, [\rp]		@ get absolute addr of 99f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
+		bne	100f			@ already configured
+
+		/* Configure the UART offset from the phys/virt base */
+#ifdef CONFIG_DEBUG_ZOOM_UART
+		ldr	\rp, =ZOOM_UART_BASE
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rp, =ZOOM_UART_VIRT
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
+		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
+		str	\rp, [\tmp, #8]		@ omap_uart_lsr
+#endif
+		b	10b
+
+		.align
+99:		.word	.
+		.word	omap_uart_phys
+		.ltorg
+
+100:		/* Pass the UART_LSR reg address */
+		ldr	\tmp, [\tmp, #8]	@ omap_uart_lsr
+		add	\rp, \rp, \tmp
+		add	\rv, \rv, \tmp
+		.endm
+
+		.macro	senduart,rd,rx
+		orr	\rd, \rd, \rx, lsl #24	@ preserve LSR reg offset
+		bic	\rx, \rx, #0xff		@ get base (THR) reg address
+		strb	\rd, [\rx]		@ send lower byte of rd
+		orr	\rx, \rx, \rd, lsr #24	@ restore original rx (LSR)
+		bic	\rd, \rd, #(0xff << 24)	@ restore original rd
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx]		@ rx contains UART_LSR address
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		bne	1001b
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm