diff options
Diffstat (limited to 'arch/arm/mach-mvebu')
26 files changed, 3331 insertions, 0 deletions
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig new file mode 100644 index 000000000..34dbeaab9 --- /dev/null +++ b/arch/arm/mach-mvebu/Kconfig @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_MVEBU + bool "Marvell Engineering Business Unit (MVEBU) SoCs" + depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 + select ARCH_SUPPORTS_BIG_ENDIAN + select CLKSRC_MMIO + select PINCTRL + select PLAT_ORION + select SOC_BUS + select MVEBU_MBUS + select ZONE_DMA if ARM_LPAE + select GPIOLIB + select PCI_QUIRKS if PCI + +if ARCH_MVEBU + +config MACH_MVEBU_ANY + bool + +config MACH_MVEBU_V7 + bool + select ARMADA_370_XP_TIMER + select CACHE_L2X0 + select ARM_CPU_SUSPEND + select MACH_MVEBU_ANY + select MVEBU_CLK_COREDIV + +config MACH_ARMADA_370 + bool "Marvell Armada 370 boards" + depends on ARCH_MULTI_V7 + select ARMADA_370_CLK + select ARMADA_370_XP_IRQ + select CPU_PJ4B + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_370 + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 370 SoC with device tree. + +config MACH_ARMADA_375 + bool "Marvell Armada 375 boards" + depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ + select ARM_ERRATA_720789 + select PL310_ERRATA_753970 + select ARM_GIC + select ARMADA_375_CLK + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_375 + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 375 SoC with device tree. + +config MACH_ARMADA_38X + bool "Marvell Armada 380/385 boards" + depends on ARCH_MULTI_V7 + select ARM_ERRATA_720789 + select PL310_ERRATA_753970 + select ARM_GIC + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + select ARMADA_370_XP_IRQ + select ARMADA_38X_CLK + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_38X + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 380/385 SoC with device tree. + +config MACH_ARMADA_39X + bool "Marvell Armada 39x boards" + depends on ARCH_MULTI_V7 + select ARM_GIC + select ARMADA_370_XP_IRQ + select ARMADA_39X_CLK + select CACHE_L2X0 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_39X + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada 39x SoC with device tree. + +config MACH_ARMADA_XP + bool "Marvell Armada XP boards" + depends on ARCH_MULTI_V7 + select ARMADA_370_XP_IRQ + select ARMADA_XP_CLK + select CPU_PJ4B + select MACH_MVEBU_V7 + select PINCTRL_ARMADA_XP + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Armada XP SoC with device tree. + +config MACH_DOVE + bool "Marvell Dove boards" + depends on ARCH_MULTI_V7 + select CACHE_L2X0 + select CPU_PJ4 + select DOVE_CLK + select MACH_MVEBU_ANY + select ORION_IRQCHIP + select ORION_TIMER + select PM_GENERIC_DOMAINS if PM + select PINCTRL_DOVE + help + Say 'Y' here if you want your kernel to support the + Marvell Dove using flattened device tree. + +config MACH_KIRKWOOD + bool "Marvell Kirkwood boards" + depends on ARCH_MULTI_V5 + select CPU_FEROCEON + select GPIOLIB + select KIRKWOOD_CLK + select MACH_MVEBU_ANY + select ORION_IRQCHIP + select ORION_TIMER + select FORCE_PCI + select PCI_QUIRKS + select PINCTRL_KIRKWOOD + help + Say 'Y' here if you want your kernel to support boards based + on the Marvell Kirkwood device tree. + +endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile new file mode 100644 index 000000000..cb106899d --- /dev/null +++ b/arch/arm/mach-mvebu/Makefile @@ -0,0 +1,21 @@ +# SPDX-License-Identifier: GPL-2.0 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include + +AFLAGS_coherency_ll.o := -Wa,-march=armv7-a +CFLAGS_pmsu.o := -march=armv7-a + +obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o + +ifeq ($(CONFIG_MACH_MVEBU_V7),y) +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o + +obj-$(CONFIG_PM) += pm.o pm-board.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o +endif + +obj-$(CONFIG_MACH_DOVE) += dove.o + +ifeq ($(CONFIG_MACH_KIRKWOOD),y) +obj-y += kirkwood.o +obj-$(CONFIG_PM) += kirkwood-pm.o +endif diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h new file mode 100644 index 000000000..09413b678 --- /dev/null +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -0,0 +1,23 @@ +/* + * Generic definitions for Marvell Armada_370_XP SoCs + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_ARMADA_370_XP_H +#define __MACH_ARMADA_370_XP_H + +#ifdef CONFIG_SMP +void armada_xp_secondary_startup(void); +extern const struct smp_operations armada_xp_smp_ops; +#endif + +#endif /* __MACH_ARMADA_370_XP_H */ diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c new file mode 100644 index 000000000..d2df5ef93 --- /dev/null +++ b/arch/arm/mach-mvebu/board-v7.c @@ -0,0 +1,210 @@ +/* + * Device Tree support for Armada 370 and XP platforms. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/io.h> +#include <linux/clocksource.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> +#include <linux/mbus.h> +#include <linux/slab.h> +#include <linux/irqchip.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/smp_scu.h> +#include "armada-370-xp.h" +#include "common.h" +#include "coherency.h" +#include "mvebu-soc-id.h" + +static void __iomem *scu_base; + +/* + * Enables the SCU when available. Obviously, this is only useful on + * Cortex-A based SOCs, not on PJ4B based ones. + */ +static void __init mvebu_scu_enable(void) +{ + struct device_node *np = + of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +void __iomem *mvebu_get_scu_base(void) +{ + return scu_base; +} + +/* + * When returning from suspend, the platform goes through the + * bootloader, which executes its DDR3 training code. This code has + * the unfortunate idea of using the first 10 KB of each DRAM bank to + * exercise the RAM and calculate the optimal timings. Therefore, this + * area of RAM is overwritten, and shouldn't be used by the kernel if + * suspend/resume is supported. + */ + +#ifdef CONFIG_SUSPEND +#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K) +static int __init mvebu_scan_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *reg, *endp; + int l; + + if (type == NULL || strcmp(type, "memory")) + return 0; + + reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l); + if (reg == NULL) + reg = of_get_flat_dt_prop(node, "reg", &l); + if (reg == NULL) + return 0; + + endp = reg + (l / sizeof(__be32)); + while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { + u64 base, size; + + base = dt_mem_next_cell(dt_root_addr_cells, ®); + size = dt_mem_next_cell(dt_root_size_cells, ®); + + memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ); + } + + return 0; +} + +static void __init mvebu_memblock_reserve(void) +{ + of_scan_flat_dt(mvebu_scan_mem, NULL); +} +#else +static void __init mvebu_memblock_reserve(void) {} +#endif + +static void __init mvebu_init_irq(void) +{ + irqchip_init(); + mvebu_scu_enable(); + coherency_init(); + BUG_ON(mvebu_mbus_dt_init(coherency_available())); +} + +static void __init i2c_quirk(void) +{ + struct device_node *np; + u32 dev, rev; + + /* + * Only revisons more recent than A0 support the offload + * mechanism. We can exit only if we are sure that we can + * get the SoC revision and it is more recent than A0. + */ + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) + return; + + for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { + struct property *new_compat; + + new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL); + + new_compat->name = kstrdup("compatible", GFP_KERNEL); + new_compat->length = sizeof("marvell,mv78230-a0-i2c"); + new_compat->value = kstrdup("marvell,mv78230-a0-i2c", + GFP_KERNEL); + + of_update_property(np, new_compat); + } +} + +static void __init mvebu_dt_init(void) +{ + if (of_machine_is_compatible("marvell,armadaxp")) + i2c_quirk(); +} + +static void __init armada_370_xp_dt_fixup(void) +{ +#ifdef CONFIG_SMP + smp_set_ops(smp_ops(armada_xp_smp_ops)); +#endif +} + +static const char * const armada_370_xp_dt_compat[] __initconst = { + "marvell,armada-370-xp", + NULL, +}; + +DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_machine = mvebu_dt_init, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .reserve = mvebu_memblock_reserve, + .dt_compat = armada_370_xp_dt_compat, + .dt_fixup = armada_370_xp_dt_fixup, +MACHINE_END + +static const char * const armada_375_dt_compat[] __initconst = { + "marvell,armada375", + NULL, +}; + +DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .init_machine = mvebu_dt_init, + .restart = mvebu_restart, + .dt_compat = armada_375_dt_compat, +MACHINE_END + +static const char * const armada_38x_dt_compat[] __initconst = { + "marvell,armada380", + "marvell,armada385", + NULL, +}; + +DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .dt_compat = armada_38x_dt_compat, +MACHINE_END + +static const char * const armada_39x_dt_compat[] __initconst = { + "marvell,armada390", + "marvell,armada398", + NULL, +}; + +DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .init_irq = mvebu_init_irq, + .restart = mvebu_restart, + .dt_compat = armada_39x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c new file mode 100644 index 000000000..49e3c8d20 --- /dev/null +++ b/arch/arm/mach-mvebu/coherency.c @@ -0,0 +1,305 @@ +/* + * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP + * platforms. + * + * Copyright (C) 2012 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is + * responsible for ensuring hardware coherency between all CPUs and between + * CPUs and I/O masters. This file initializes the coherency fabric and + * supplies basic routines for configuring and controlling hardware coherency + */ + +#define pr_fmt(fmt) "mvebu-coherency: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/smp.h> +#include <linux/dma-map-ops.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mbus.h> +#include <linux/pci.h> +#include <asm/smp_plat.h> +#include <asm/cacheflush.h> +#include <asm/mach/map.h> +#include <asm/dma-mapping.h> +#include "coherency.h" +#include "mvebu-soc-id.h" + +unsigned long coherency_phys_base; +void __iomem *coherency_base; +static void __iomem *coherency_cpu_base; +static void __iomem *cpu_config_base; + +/* Coherency fabric registers */ +#define IO_SYNC_BARRIER_CTL_OFFSET 0x0 + +enum { + COHERENCY_FABRIC_TYPE_NONE, + COHERENCY_FABRIC_TYPE_ARMADA_370_XP, + COHERENCY_FABRIC_TYPE_ARMADA_375, + COHERENCY_FABRIC_TYPE_ARMADA_380, +}; + +static const struct of_device_id of_coherency_table[] = { + {.compatible = "marvell,coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP }, + {.compatible = "marvell,armada-375-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 }, + {.compatible = "marvell,armada-380-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 }, + { /* end of list */ }, +}; + +/* Functions defined in coherency_ll.S */ +int ll_enable_coherency(void); +void ll_add_cpu_to_smp_group(void); + +#define CPU_CONFIG_SHARED_L2 BIT(16) + +/* + * Disable the "Shared L2 Present" bit in CPU Configuration register + * on Armada XP. + * + * The "Shared L2 Present" bit affects the "level of coherence" value + * in the clidr CP15 register. Cache operation functions such as + * "flush all" and "invalidate all" operate on all the cache levels + * that included in the defined level of coherence. When HW I/O + * coherency is used, this bit causes unnecessary flushes of the L2 + * cache. + */ +static void armada_xp_clear_shared_l2(void) +{ + u32 reg; + + if (!cpu_config_base) + return; + + reg = readl(cpu_config_base); + reg &= ~CPU_CONFIG_SHARED_L2; + writel(reg, cpu_config_base); +} + +static int mvebu_hwcc_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct device *dev = __dev; + + if (event != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + set_dma_ops(dev, &arm_coherent_dma_ops); + + return NOTIFY_OK; +} + +static struct notifier_block mvebu_hwcc_nb = { + .notifier_call = mvebu_hwcc_notifier, +}; + +static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = { + .notifier_call = mvebu_hwcc_notifier, +}; + +static int armada_xp_clear_l2_starting(unsigned int cpu) +{ + armada_xp_clear_shared_l2(); + return 0; +} + +static void __init armada_370_coherency_init(struct device_node *np) +{ + struct resource res; + struct device_node *cpu_config_np; + + of_address_to_resource(np, 0, &res); + coherency_phys_base = res.start; + /* + * Ensure secondary CPUs will see the updated value, + * which they read before they join the coherency + * fabric, and therefore before they are coherent with + * the boot CPU cache. + */ + sync_cache_w(&coherency_phys_base); + coherency_base = of_iomap(np, 0); + coherency_cpu_base = of_iomap(np, 1); + + cpu_config_np = of_find_compatible_node(NULL, NULL, + "marvell,armada-xp-cpu-config"); + if (!cpu_config_np) + goto exit; + + cpu_config_base = of_iomap(cpu_config_np, 0); + if (!cpu_config_base) { + of_node_put(cpu_config_np); + goto exit; + } + + of_node_put(cpu_config_np); + + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_COHERENCY, + "arm/mvebu/coherency:starting", + armada_xp_clear_l2_starting, NULL); +exit: + set_cpu_coherent(); +} + +/* + * This ioremap hook is used on Armada 375/38x to ensure that all MMIO + * areas are mapped as MT_UNCACHED instead of MT_DEVICE. This is + * needed for the HW I/O coherency mechanism to work properly without + * deadlock. + */ +static void __iomem * +armada_wa_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) +{ + mtype = MT_UNCACHED; + return __arm_ioremap_caller(phys_addr, size, mtype, caller); +} + +static void __init armada_375_380_coherency_init(struct device_node *np) +{ + struct device_node *cache_dn; + + coherency_cpu_base = of_iomap(np, 0); + arch_ioremap_caller = armada_wa_ioremap_caller; + pci_ioremap_set_mem_type(MT_UNCACHED); + + /* + * We should switch the PL310 to I/O coherency mode only if + * I/O coherency is actually enabled. + */ + if (!coherency_available()) + return; + + /* + * Add the PL310 property "arm,io-coherent". This makes sure the + * outer sync operation is not used, which allows to + * workaround the system erratum that causes deadlocks when + * doing PCIe in an SMP situation on Armada 375 and Armada + * 38x. + */ + for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") { + struct property *p; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + p->name = kstrdup("arm,io-coherent", GFP_KERNEL); + of_add_property(cache_dn, p); + } +} + +static int coherency_type(void) +{ + struct device_node *np; + const struct of_device_id *match; + int type; + + /* + * The coherency fabric is needed: + * - For coherency between processors on Armada XP, so only + * when SMP is enabled. + * - For coherency between the processor and I/O devices, but + * this coherency requires many pre-requisites (write + * allocate cache policy, shareable pages, SMP bit set) that + * are only meant in SMP situations. + * + * Note that this means that on Armada 370, there is currently + * no way to use hardware I/O coherency, because even when + * CONFIG_SMP is enabled, is_smp() returns false due to the + * Armada 370 being a single-core processor. To lift this + * limitation, we would have to find a way to make the cache + * policy set to write-allocate (on all Armada SoCs), and to + * set the shareable attribute in page tables (on all Armada + * SoCs except the Armada 370). Unfortunately, such decisions + * are taken very early in the kernel boot process, at a point + * where we don't know yet on which SoC we are running. + + */ + if (!is_smp()) + return COHERENCY_FABRIC_TYPE_NONE; + + np = of_find_matching_node_and_match(NULL, of_coherency_table, &match); + if (!np) + return COHERENCY_FABRIC_TYPE_NONE; + + type = (int) match->data; + + of_node_put(np); + + return type; +} + +int set_cpu_coherent(void) +{ + int type = coherency_type(); + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) { + if (!coherency_base) { + pr_warn("Can't make current CPU cache coherent.\n"); + pr_warn("Coherency fabric is not initialized\n"); + return 1; + } + + armada_xp_clear_shared_l2(); + ll_add_cpu_to_smp_group(); + return ll_enable_coherency(); + } + + return 0; +} + +int coherency_available(void) +{ + return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; +} + +int __init coherency_init(void) +{ + int type = coherency_type(); + struct device_node *np; + + np = of_find_matching_node(NULL, of_coherency_table); + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + armada_370_coherency_init(np); + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 || + type == COHERENCY_FABRIC_TYPE_ARMADA_380) + armada_375_380_coherency_init(np); + + of_node_put(np); + + return 0; +} + +static int __init coherency_late_init(void) +{ + if (coherency_available()) + bus_register_notifier(&platform_bus_type, + &mvebu_hwcc_nb); + return 0; +} + +postcore_initcall(coherency_late_init); + +#if IS_ENABLED(CONFIG_PCI) +static int __init coherency_pci_init(void) +{ + if (coherency_available()) + bus_register_notifier(&pci_bus_type, + &mvebu_hwcc_pci_nb); + return 0; +} + +arch_initcall(coherency_pci_init); +#endif diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h new file mode 100644 index 000000000..6067f1426 --- /dev/null +++ b/arch/arm/mach-mvebu/coherency.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-mvebu/include/mach/coherency.h + * + * + * Coherency fabric (Aurora) support for Armada 370 and XP platforms. + * + * Copyright (C) 2012 Marvell + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_370_XP_COHERENCY_H +#define __MACH_370_XP_COHERENCY_H + +extern void __iomem *coherency_base; /* for coherency_ll.S */ +extern unsigned long coherency_phys_base; +int set_cpu_coherent(void); + +int coherency_init(void); +int coherency_available(void); + +#endif /* __MACH_370_XP_COHERENCY_H */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S new file mode 100644 index 000000000..a3a64bf97 --- /dev/null +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -0,0 +1,161 @@ +/* + * Coherency fabric: low level functions + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file implements the assembly function to add a CPU to the + * coherency fabric. This function is called by each of the secondary + * CPUs during their early boot in an SMP kernel, this why this + * function have to callable from assembly. It can also be called by a + * primary CPU from C code during its boot. + */ + +#include <linux/linkage.h> +#define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0 +#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4 + +#include <asm/assembler.h> +#include <asm/cp15.h> + + .text +/* + * Returns the coherency base address in r1 (r0 is untouched), or 0 if + * the coherency fabric is not enabled. + */ +ENTRY(ll_get_coherency_base) + mrc p15, 0, r1, c1, c0, 0 + tst r1, #CR_M @ Check MMU bit enabled + bne 1f + + /* + * MMU is disabled, use the physical address of the coherency + * base address, (or 0x0 if the coherency fabric is not mapped) + */ + adr r1, 3f + ldr r3, [r1] + ldr r1, [r1, r3] + b 2f +1: + /* + * MMU is enabled, use the virtual address of the coherency + * base address. + */ + ldr r1, =coherency_base + ldr r1, [r1] +2: + ret lr +ENDPROC(ll_get_coherency_base) + +/* + * Returns the coherency CPU mask in r3 (r0 is untouched). This + * coherency CPU mask can be used with the coherency fabric + * configuration and control registers. Note that the mask is already + * endian-swapped as appropriate so that the calling functions do not + * have to care about endianness issues while accessing the coherency + * fabric registers + */ +ENTRY(ll_get_coherency_cpumask) + mrc p15, 0, r3, cr0, cr0, 5 + and r3, r3, #15 + mov r2, #(1 << 24) + lsl r3, r2, r3 +ARM_BE8(rev r3, r3) + ret lr +ENDPROC(ll_get_coherency_cpumask) + +/* + * ll_add_cpu_to_smp_group(), ll_enable_coherency() and + * ll_disable_coherency() use the strex/ldrex instructions while the + * MMU can be disabled. The Armada XP SoC has an exclusive monitor + * that tracks transactions to Device and/or SO memory and thanks to + * that, exclusive transactions are functional even when the MMU is + * disabled. + */ + +ENTRY(ll_add_cpu_to_smp_group) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + /* Bail out if the coherency is not enabled */ + cmp r1, #0 + reteq r0 + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET +1: + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + ret lr +ENDPROC(ll_add_cpu_to_smp_group) + +ENTRY(ll_enable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + /* Bail out if the coherency is not enabled */ + cmp r1, #0 + reteq r0 + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + dsb + mov r0, #0 + ret lr +ENDPROC(ll_enable_coherency) + +ENTRY(ll_disable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + /* Bail out if the coherency is not enabled */ + cmp r1, #0 + reteq r0 + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + bic r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + dsb + ret lr +ENDPROC(ll_disable_coherency) + + .align 2 +3: + .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h new file mode 100644 index 000000000..6b775492c --- /dev/null +++ b/arch/arm/mach-mvebu/common.h @@ -0,0 +1,30 @@ +/* + * Core functions for Marvell System On Chip + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ARCH_MVEBU_COMMON_H +#define __ARCH_MVEBU_COMMON_H + +#include <linux/reboot.h> + +void mvebu_restart(enum reboot_mode mode, const char *cmd); +int mvebu_cpu_reset_deassert(int cpu); +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr); +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr); +int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev); + +void __iomem *mvebu_get_scu_base(void); + +int mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg, + u32 srcmd)); +#endif diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c new file mode 100644 index 000000000..f33a31c6a --- /dev/null +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "mvebu-cpureset: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/resource.h> + +#include "common.h" + +static void __iomem *cpu_reset_base; +static size_t cpu_reset_size; + +#define CPU_RESET_OFFSET(cpu) (cpu * 0x8) +#define CPU_RESET_ASSERT BIT(0) + +int mvebu_cpu_reset_deassert(int cpu) +{ + u32 reg; + + if (!cpu_reset_base) + return -ENODEV; + + if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size) + return -EINVAL; + + reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu)); + reg &= ~CPU_RESET_ASSERT; + writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu)); + + return 0; +} + +static int mvebu_cpu_reset_map(struct device_node *np, int res_idx) +{ + struct resource res; + + if (of_address_to_resource(np, res_idx, &res)) { + pr_err("unable to get resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + return -EBUSY; + } + + cpu_reset_base = ioremap(res.start, resource_size(&res)); + if (!cpu_reset_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + return -ENOMEM; + } + + cpu_reset_size = resource_size(&res); + + return 0; +} + +static int __init mvebu_cpu_reset_init(void) +{ + struct device_node *np; + int res_idx; + int ret; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-cpu-reset"); + if (np) { + res_idx = 0; + } else { + /* + * This code is kept for backward compatibility with + * old Device Trees. + */ + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-xp-pmsu"); + if (np) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res_idx = 1; + } + } + + /* No reset node found */ + if (!np) + return -ENODEV; + + ret = mvebu_cpu_reset_map(np, res_idx); + of_node_put(np); + + return ret; +} + +early_initcall(mvebu_cpu_reset_init); diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c new file mode 100644 index 000000000..d076c5771 --- /dev/null +++ b/arch/arm/mach-mvebu/dove.c @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mvebu/dove.c + * + * Marvell Dove 88AP510 System On Chip FDT Board + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/of.h> +#include <linux/soc/dove/pmu.h> +#include <asm/hardware/cache-tauros2.h> +#include <asm/mach/arch.h> +#include "common.h" + +static void __init dove_init(void) +{ + pr_info("Dove 88AP510 SoC\n"); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(0); +#endif + BUG_ON(mvebu_mbus_dt_init(false)); + dove_init_pmu(); +} + +static const char * const dove_dt_compat[] __initconst = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove") + .init_machine = dove_init, + .restart = mvebu_restart, + .dt_compat = dove_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S new file mode 100644 index 000000000..b093a196e --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -0,0 +1,23 @@ +/* + * SMP support: Entry point for secondary CPUs of Marvell EBU + * Cortex-A9 based SOCs (Armada 375 and Armada 38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> + +#include <asm/assembler.h> + +ENTRY(mvebu_cortex_a9_secondary_startup) +ARM_BE8(setend be) + bl armada_38x_scu_power_up + b secondary_startup +ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S new file mode 100644 index 000000000..2c4032e36 --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp.S @@ -0,0 +1,40 @@ +/* + * SMP support: Entry point for secondary CPUs + * + * Copyright (C) 2012 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file implements the assembly entry point for secondary CPUs in + * an SMP kernel. The only thing we need to do is to add the CPU to + * the coherency fabric by writing to 2 registers. Currently the base + * register addresses are hard coded due to the early initialisation + * problems. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + +#include <asm/assembler.h> + +/* + * Armada XP specific entry point for secondary CPUs. + * We add the CPU to the coherency fabric and then jump to secondary + * startup + */ +ENTRY(armada_xp_secondary_startup) + ARM_BE8(setend be ) @ go BE8 if entered LE + + bl ll_add_cpu_to_smp_group + + bl ll_enable_coherency + + b secondary_startup + +ENDPROC(armada_xp_secondary_startup) diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c new file mode 100644 index 000000000..7c65ea2a8 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + */ + +#include <linux/kernel.h> +#include <linux/suspend.h> +#include <linux/io.h> +#include "kirkwood.h" +#include "kirkwood-pm.h" + +static void __iomem *ddr_operation_base; +static void __iomem *memory_pm_ctrl; + +static void kirkwood_low_power(void) +{ + u32 mem_pm_ctrl; + + mem_pm_ctrl = readl(memory_pm_ctrl); + + /* Set peripherals to low-power mode */ + writel_relaxed(~0, memory_pm_ctrl); + + /* Set DDR in self-refresh */ + writel_relaxed(0x7, ddr_operation_base); + + /* + * Set CPU in wait-for-interrupt state. + * This disables the CPU core clocks, + * the array clocks, and also the L2 controller. + */ + cpu_do_idle(); + + writel_relaxed(mem_pm_ctrl, memory_pm_ctrl); +} + +static int kirkwood_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + kirkwood_low_power(); + break; + default: + return -EINVAL; + } + return 0; +} + +static int kirkwood_pm_valid_standby(suspend_state_t state) +{ + return state == PM_SUSPEND_STANDBY; +} + +static const struct platform_suspend_ops kirkwood_suspend_ops = { + .enter = kirkwood_suspend_enter, + .valid = kirkwood_pm_valid_standby, +}; + +void __init kirkwood_pm_init(void) +{ + ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); + memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); + + suspend_set_ops(&kirkwood_suspend_ops); +} diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h new file mode 100644 index 000000000..7ce7fac39 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood-pm.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Power Management driver for Marvell Kirkwood SoCs + * + * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com> + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + */ + +#ifndef __ARCH_KIRKWOOD_PM_H +#define __ARCH_KIRKWOOD_PM_H + +#ifdef CONFIG_PM +void kirkwood_pm_init(void); +#else +static inline void kirkwood_pm_init(void) {}; +#endif + +#endif diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c new file mode 100644 index 000000000..ceaad6d59 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -0,0 +1,193 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-mvebu/kirkwood.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mbus.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_net.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <asm/hardware/cache-feroceon-l2.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include "kirkwood.h" +#include "kirkwood-pm.h" +#include "common.h" + +static struct resource kirkwood_cpufreq_resources[] = { + [0] = { + .start = CPU_CONTROL_PHYS, + .end = CPU_CONTROL_PHYS + 3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_cpufreq_device = { + .name = "kirkwood-cpufreq", + .id = -1, + .num_resources = ARRAY_SIZE(kirkwood_cpufreq_resources), + .resource = kirkwood_cpufreq_resources, +}; + +static void __init kirkwood_cpufreq_init(void) +{ + platform_device_register(&kirkwood_cpufreq_device); +} + +static struct resource kirkwood_cpuidle_resource[] = { + { + .flags = IORESOURCE_MEM, + .start = DDR_OPERATION_BASE, + .end = DDR_OPERATION_BASE + 3, + }, +}; + +static struct platform_device kirkwood_cpuidle = { + .name = "kirkwood_cpuidle", + .id = -1, + .resource = kirkwood_cpuidle_resource, + .num_resources = 1, +}; + +static void __init kirkwood_cpuidle_init(void) +{ + platform_device_register(&kirkwood_cpuidle); +} + +#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 +#define MV643XX_ETH_MAC_ADDR_HIGH 0x0418 + +static void __init kirkwood_dt_eth_fixup(void) +{ + struct device_node *np; + + /* + * The ethernet interfaces forget the MAC address assigned by u-boot + * if the clocks are turned off. Usually, u-boot on kirkwood boards + * has no DT support to properly set local-mac-address property. + * As a workaround, we get the MAC address from mv643xx_eth registers + * and update the port device node if no valid MAC address is set. + */ + for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { + struct device_node *pnp = of_get_parent(np); + struct clk *clk; + struct property *pmac; + void __iomem *io; + u8 *macaddr; + u32 reg; + + if (!pnp) + continue; + + /* skip disabled nodes or nodes with valid MAC address*/ + if (!of_device_is_available(pnp) || + !IS_ERR(of_get_mac_address(np))) + goto eth_fixup_skip; + + clk = of_clk_get(pnp, 0); + if (IS_ERR(clk)) + goto eth_fixup_skip; + + io = of_iomap(pnp, 0); + if (!io) + goto eth_fixup_no_map; + + /* ensure port clock is not gated to not hang CPU */ + clk_prepare_enable(clk); + + /* store MAC address register contents in local-mac-address */ + pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); + if (!pmac) + goto eth_fixup_no_mem; + + pmac->value = pmac + 1; + pmac->length = 6; + pmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (!pmac->name) { + kfree(pmac); + goto eth_fixup_no_mem; + } + + macaddr = pmac->value; + reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); + macaddr[0] = (reg >> 24) & 0xff; + macaddr[1] = (reg >> 16) & 0xff; + macaddr[2] = (reg >> 8) & 0xff; + macaddr[3] = reg & 0xff; + + reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); + macaddr[4] = (reg >> 8) & 0xff; + macaddr[5] = reg & 0xff; + + of_update_property(np, pmac); + +eth_fixup_no_mem: + iounmap(io); + clk_disable_unprepare(clk); +eth_fixup_no_map: + clk_put(clk); +eth_fixup_skip: + of_node_put(pnp); + } +} + +/* + * Disable propagation of mbus errors to the CPU local bus, as this + * causes mbus errors (which can occur for example for PCI aborts) to + * throw CPU aborts, which we're not set up to deal with. + */ +static void kirkwood_disable_mbus_error_propagation(void) +{ + void __iomem *cpu_config; + + cpu_config = ioremap(CPU_CONFIG_PHYS, 4); + writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); +} + +static struct of_dev_auxdata auxdata[] __initdata = { + OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000, + "mvebu-audio", NULL), + { /* sentinel */ } +}; + +static void __init kirkwood_dt_init(void) +{ + kirkwood_disable_mbus_error_propagation(); + + BUG_ON(mvebu_mbus_dt_init(false)); + +#ifdef CONFIG_CACHE_FEROCEON_L2 + feroceon_of_init(); +#endif + kirkwood_cpufreq_init(); + kirkwood_cpuidle_init(); + + kirkwood_pm_init(); + kirkwood_dt_eth_fixup(); + + of_platform_default_populate(NULL, auxdata, NULL); +} + +static const char * const kirkwood_dt_board_compat[] __initconst = { + "marvell,kirkwood", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .init_machine = kirkwood_dt_init, + .restart = mvebu_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h new file mode 100644 index 000000000..89f3d1f51 --- /dev/null +++ b/arch/arm/mach-mvebu/kirkwood.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-mvebu/kirkwood.h + * + * Generic definitions for Marvell Kirkwood SoC flavors: + * 88F6180, 88F6192 and 88F6281. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000 +#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000) + +#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418) + +#define CPU_CONFIG_PHYS (BRIDGE_PHYS_BASE + 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + +#define CPU_CONTROL_PHYS (BRIDGE_PHYS_BASE + 0x0104) +#define MEMORY_PM_CTRL_PHYS (BRIDGE_PHYS_BASE + 0x0118) diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c new file mode 100644 index 000000000..a99434bce --- /dev/null +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -0,0 +1,178 @@ +/* + * ID and revision information for mvebu SoCs + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * All the mvebu SoCs have information related to their variant and + * revision that can be read from the PCI control register. This is + * done before the PCI initialization to avoid any conflict. Once the + * ID and revision are retrieved, the mapping is freed. + */ + +#define pr_fmt(fmt) "mvebu-soc-id: " fmt + +#include <linux/clk.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> +#include "common.h" +#include "mvebu-soc-id.h" + +#define PCIE_DEV_ID_OFF 0x0 +#define PCIE_DEV_REV_OFF 0x8 + +#define SOC_ID_MASK 0xFFFF0000 +#define SOC_REV_MASK 0xFF + +static u32 soc_dev_id; +static u32 soc_rev; +static bool is_id_valid; + +static const struct of_device_id mvebu_pcie_of_match_table[] = { + { .compatible = "marvell,armada-xp-pcie", }, + { .compatible = "marvell,armada-370-pcie", }, + { .compatible = "marvell,kirkwood-pcie" }, + {}, +}; + +int mvebu_get_soc_id(u32 *dev, u32 *rev) +{ + if (is_id_valid) { + *dev = soc_dev_id; + *rev = soc_rev; + return 0; + } else + return -ENODEV; +} + +static int __init get_soc_id_by_pci(void) +{ + struct device_node *np; + int ret = 0; + void __iomem *pci_base; + struct clk *clk; + struct device_node *child; + + np = of_find_matching_node(NULL, mvebu_pcie_of_match_table); + if (!np) + return ret; + + /* + * ID and revision are available from any port, so we + * just pick the first one + */ + child = of_get_next_child(np, NULL); + if (child == NULL) { + pr_err("cannot get pci node\n"); + ret = -ENOMEM; + goto clk_err; + } + + clk = of_clk_get_by_name(child, NULL); + if (IS_ERR(clk)) { + pr_err("cannot get clock\n"); + ret = -ENOMEM; + goto clk_err; + } + + ret = clk_prepare_enable(clk); + if (ret) { + pr_err("cannot enable clock\n"); + goto clk_err; + } + + pci_base = of_iomap(child, 0); + if (pci_base == NULL) { + pr_err("cannot map registers\n"); + ret = -ENOMEM; + goto res_ioremap; + } + + /* SoC ID */ + soc_dev_id = readl(pci_base + PCIE_DEV_ID_OFF) >> 16; + + /* SoC revision */ + soc_rev = readl(pci_base + PCIE_DEV_REV_OFF) & SOC_REV_MASK; + + is_id_valid = true; + + pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev); + + iounmap(pci_base); + +res_ioremap: + /* + * If the PCIe unit is actually enabled and we have PCI + * support in the kernel, we intentionally do not release the + * reference to the clock. We want to keep it running since + * the bootloader does some PCIe link configuration that the + * kernel is for now unable to do, and gating the clock would + * make us loose this precious configuration. + */ + if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) { + clk_disable_unprepare(clk); + clk_put(clk); + } + +clk_err: + of_node_put(child); + of_node_put(np); + + return ret; +} + +static int __init mvebu_soc_id_init(void) +{ + + /* + * First try to get the ID and the revision by the system + * register and use PCI registers only if it is not possible + */ + if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) { + is_id_valid = true; + pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev); + return 0; + } + + return get_soc_id_by_pci(); +} +early_initcall(mvebu_soc_id_init); + +static int __init mvebu_soc_device(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + + /* Also protects against running on non-mvebu systems */ + if (!is_id_valid) + return 0; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + } + + return 0; +} +postcore_initcall(mvebu_soc_device); diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h new file mode 100644 index 000000000..e124a0b82 --- /dev/null +++ b/arch/arm/mach-mvebu/mvebu-soc-id.h @@ -0,0 +1,54 @@ +/* + * Marvell EBU SoC ID and revision definitions. + * + * Copyright (C) 2014 Marvell Semiconductor + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LINUX_MVEBU_SOC_ID_H +#define __LINUX_MVEBU_SOC_ID_H + +/* Armada XP ID */ +#define MV78230_DEV_ID 0x7823 +#define MV78260_DEV_ID 0x7826 +#define MV78460_DEV_ID 0x7846 + +/* Armada XP Revision */ +#define MV78XX0_A0_REV 0x1 +#define MV78XX0_B0_REV 0x2 + +/* Amada 370 ID */ +#define ARMADA_370_DEV_ID 0x6710 + +/* Amada 370 Revision */ +#define ARMADA_370_A1_REV 0x1 + +/* Armada 375 ID */ +#define ARMADA_375_DEV_ID 0x6720 + +/* Armada 375 */ +#define ARMADA_375_Z1_REV 0x0 +#define ARMADA_375_A0_REV 0x3 + +/* Armada 38x ID */ +#define ARMADA_380_DEV_ID 0x6810 +#define ARMADA_385_DEV_ID 0x6820 +#define ARMADA_388_DEV_ID 0x6828 + +/* Armada 38x Revision */ +#define ARMADA_38x_Z1_REV 0x0 +#define ARMADA_38x_A0_REV 0x4 + +#ifdef CONFIG_ARCH_MVEBU +int mvebu_get_soc_id(u32 *dev, u32 *rev); +#else +static inline int mvebu_get_soc_id(u32 *dev, u32 *rev) +{ + return -1; +} +#endif + +#endif /* __LINUX_MVEBU_SOC_ID_H */ diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c new file mode 100644 index 000000000..d715dec1c --- /dev/null +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -0,0 +1,114 @@ +/* + * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9 + * based SOCs (Armada 375/38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <linux/mbus.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include "common.h" +#include "pmsu.h" + +extern void mvebu_cortex_a9_secondary_startup(void); + +static int mvebu_cortex_a9_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + int ret, hw_cpu; + + pr_info("Booting CPU %d\n", cpu); + + /* + * Write the address of secondary startup into the system-wide + * flags register. The boot monitor waits until it receives a + * soft interrupt, and then the secondary CPU branches to this + * address. + */ + hw_cpu = cpu_logical_map(cpu); + if (of_machine_is_compatible("marvell,armada375")) + mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup); + else + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cortex_a9_secondary_startup); + smp_wmb(); + + /* + * Doing this before deasserting the CPUs is needed to wake up CPUs + * in the offline state after using CPU hotplug. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_err("Could not start the secondary CPU: %d\n", ret); + return ret; + } + + return 0; +} +/* + * When a CPU is brought back online, either through CPU hotplug, or + * because of the boot of a kexec'ed kernel, the PMSU configuration + * for this CPU might be in the deep idle state, preventing this CPU + * from receiving interrupts. Here, we therefore take out the current + * CPU from this state, which was entered by armada_38x_cpu_die() + * below. + */ +static void armada_38x_secondary_init(unsigned int cpu) +{ + mvebu_v7_pmsu_idle_exit(); +} + +#ifdef CONFIG_HOTPLUG_CPU +static void armada_38x_cpu_die(unsigned int cpu) +{ + /* + * CPU hotplug is implemented by putting offline CPUs into the + * deep idle sleep state. + */ + armada_38x_do_cpu_suspend(true); +} + +/* + * We need a dummy function, so that platform_can_cpu_hotplug() knows + * we support CPU hotplug. However, the function does not need to do + * anything, because CPUs going offline can enter the deep idle state + * by themselves, without any help from a still alive CPU. + */ +static int armada_38x_cpu_kill(unsigned int cpu) +{ + return 1; +} +#endif + +static const struct smp_operations mvebu_cortex_a9_smp_ops __initconst = { + .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, +}; + +static const struct smp_operations armada_38x_smp_ops __initconst = { + .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, + .smp_secondary_init = armada_38x_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_38x_cpu_die, + .cpu_kill = armada_38x_cpu_kill, +#endif +}; + +CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", + &mvebu_cortex_a9_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", + &armada_38x_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_390_smp, "marvell,armada-390-smp", + &armada_38x_smp_ops); diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c new file mode 100644 index 000000000..c130497dc --- /dev/null +++ b/arch/arm/mach-mvebu/platsmp.c @@ -0,0 +1,258 @@ +/* + * Symmetric Multi Processing (SMP) support for Armada XP + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency + * This file implements the routines for preparing the SMP infrastructure + * and waking up the secondary CPUs + */ + +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/mbus.h> +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include "common.h" +#include "armada-370-xp.h" +#include "pmsu.h" +#include "coherency.h" + +#define ARMADA_XP_MAX_CPUS 4 + +#define AXP_BOOTROM_BASE 0xfff00000 +#define AXP_BOOTROM_SIZE 0x100000 + +static struct clk *boot_cpu_clk; + +static struct clk *get_cpu_clk(int cpu) +{ + struct clk *cpu_clk; + struct device_node *np = of_get_cpu_node(cpu, NULL); + + if (WARN(!np, "missing cpu node\n")) + return NULL; + cpu_clk = of_clk_get(np, 0); + if (WARN_ON(IS_ERR(cpu_clk))) + return NULL; + return cpu_clk; +} + +static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int ret, hw_cpu; + + pr_info("Booting CPU %d\n", cpu); + + hw_cpu = cpu_logical_map(cpu); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); + + /* + * This is needed to wake up CPUs in the offline state after + * using CPU hotplug. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + /* + * This is needed to take secondary CPUs out of reset on the + * initial boot. + */ + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } + + return 0; +} + +/* + * When a CPU is brought back online, either through CPU hotplug, or + * because of the boot of a kexec'ed kernel, the PMSU configuration + * for this CPU might be in the deep idle state, preventing this CPU + * from receiving interrupts. Here, we therefore take out the current + * CPU from this state, which was entered by armada_xp_cpu_die() + * below. + */ +static void armada_xp_secondary_init(unsigned int cpu) +{ + mvebu_v7_pmsu_idle_exit(); +} + +static void __init armada_xp_smp_init_cpus(void) +{ + unsigned int ncores = num_possible_cpus(); + + if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) + panic("Invalid number of CPUs in DT\n"); +} + +static int armada_xp_sync_secondary_clk(unsigned int cpu) +{ + struct clk *cpu_clk = get_cpu_clk(cpu); + + if (!cpu_clk || !boot_cpu_clk) + return 0; + + clk_prepare_enable(cpu_clk); + clk_set_rate(cpu_clk, clk_get_rate(boot_cpu_clk)); + + return 0; +} + +static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *node; + struct resource res; + int err; + + flush_cache_all(); + set_cpu_coherent(); + + boot_cpu_clk = get_cpu_clk(smp_processor_id()); + if (boot_cpu_clk) { + clk_prepare_enable(boot_cpu_clk); + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS, + "arm/mvebu/sync_clocks:online", + armada_xp_sync_secondary_clk, NULL); + } + + /* + * In order to boot the secondary CPUs we need to ensure + * the bootROM is mapped at the correct address. + */ + node = of_find_compatible_node(NULL, NULL, "marvell,bootrom"); + if (!node) + panic("Cannot find 'marvell,bootrom' compatible node"); + + err = of_address_to_resource(node, 0, &res); + of_node_put(node); + if (err < 0) + panic("Cannot get 'bootrom' node address"); + + if (res.start != AXP_BOOTROM_BASE || + resource_size(&res) != AXP_BOOTROM_SIZE) + panic("The address for the BootROM is incorrect"); +} + +#ifdef CONFIG_HOTPLUG_CPU +static void armada_xp_cpu_die(unsigned int cpu) +{ + /* + * CPU hotplug is implemented by putting offline CPUs into the + * deep idle sleep state. + */ + armada_370_xp_pmsu_idle_enter(true); +} + +/* + * We need a dummy function, so that platform_can_cpu_hotplug() knows + * we support CPU hotplug. However, the function does not need to do + * anything, because CPUs going offline can enter the deep idle state + * by themselves, without any help from a still alive CPU. + */ +static int armada_xp_cpu_kill(unsigned int cpu) +{ + return 1; +} +#endif + +const struct smp_operations armada_xp_smp_ops __initconst = { + .smp_init_cpus = armada_xp_smp_init_cpus, + .smp_prepare_cpus = armada_xp_smp_prepare_cpus, + .smp_boot_secondary = armada_xp_boot_secondary, + .smp_secondary_init = armada_xp_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, + .cpu_kill = armada_xp_cpu_kill, +#endif +}; + +CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp", + &armada_xp_smp_ops); + +#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08 +#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04 + +static const struct of_device_id of_mv98dx3236_resume_table[] = { + { + .compatible = "marvell,98dx3336-resume-ctrl", + }, + { /* end of list */ }, +}; + +static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr) +{ + struct device_node *np; + void __iomem *base; + WARN_ON(hw_cpu != 1); + + np = of_find_matching_node(NULL, of_mv98dx3236_resume_table); + if (!np) + return -ENODEV; + + base = of_io_request_and_map(np, 0, of_node_full_name(np)); + of_node_put(np); + if (IS_ERR(base)) + return PTR_ERR(base); + + writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG); + writel(__pa_symbol(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG); + + iounmap(base); + + return 0; +} + +static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int ret, hw_cpu; + + hw_cpu = cpu_logical_map(cpu); + mv98dx3236_resume_set_cpu_boot_addr(hw_cpu, + armada_xp_secondary_startup); + + /* + * This is needed to wake up CPUs in the offline state after + * using CPU hotplug. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + /* + * This is needed to take secondary CPUs out of reset on the + * initial boot. + */ + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct smp_operations mv98dx3236_smp_ops __initconst = { + .smp_init_cpus = armada_xp_smp_init_cpus, + .smp_prepare_cpus = armada_xp_smp_prepare_cpus, + .smp_boot_secondary = mv98dx3236_boot_secondary, + .smp_secondary_init = armada_xp_secondary_init, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, + .cpu_kill = armada_xp_cpu_kill, +#endif +}; + +CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp", + &mv98dx3236_smp_ops); diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c new file mode 100644 index 000000000..070552511 --- /dev/null +++ b/arch/arm/mach-mvebu/pm-board.c @@ -0,0 +1,157 @@ +/* + * Board-level suspend/resume support. + * + * Copyright (C) 2014-2015 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> +#include "common.h" + +#define ARMADA_PIC_NR_GPIOS 3 + +static void __iomem *gpio_ctrl; +static int pic_gpios[ARMADA_PIC_NR_GPIOS]; +static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS]; + +static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd) +{ + u32 reg, ackcmd; + int i; + + /* Put 001 as value on the GPIOs */ + reg = readl(gpio_ctrl); + for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) + reg &= ~BIT(pic_raw_gpios[i]); + reg |= BIT(pic_raw_gpios[0]); + writel(reg, gpio_ctrl); + + /* Prepare writing 111 to the GPIOs */ + ackcmd = readl(gpio_ctrl); + for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) + ackcmd |= BIT(pic_raw_gpios[i]); + + srcmd = cpu_to_le32(srcmd); + ackcmd = cpu_to_le32(ackcmd); + + /* + * Wait a while, the PIC needs quite a bit of time between the + * two GPIO commands. + */ + mdelay(3000); + + asm volatile ( + /* Align to a cache line */ + ".balign 32\n\t" + + /* Enter self refresh */ + "str %[srcmd], [%[sdram_reg]]\n\t" + + /* + * Wait 100 cycles for DDR to enter self refresh, by + * doing 50 times two instructions. + */ + "mov r1, #50\n\t" + "1: subs r1, r1, #1\n\t" + "bne 1b\n\t" + + /* Issue the command ACK */ + "str %[ackcmd], [%[gpio_ctrl]]\n\t" + + /* Trap the processor */ + "b .\n\t" + : : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg), + [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1"); +} + +static int __init mvebu_armada_pm_init(void) +{ + struct device_node *np; + struct device_node *gpio_ctrl_np = NULL; + int ret = 0, i; + + if (!of_machine_is_compatible("marvell,axp-gp")) + return -ENODEV; + + np = of_find_node_by_name(NULL, "pm_pic"); + if (!np) + return -ENODEV; + + for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) { + char *name; + struct of_phandle_args args; + + pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i); + if (pic_gpios[i] < 0) { + ret = -ENODEV; + goto out; + } + + name = kasprintf(GFP_KERNEL, "pic-pin%d", i); + if (!name) { + ret = -ENOMEM; + goto out; + } + + ret = gpio_request(pic_gpios[i], name); + if (ret < 0) { + kfree(name); + goto out; + } + + ret = gpio_direction_output(pic_gpios[i], 0); + if (ret < 0) { + gpio_free(pic_gpios[i]); + kfree(name); + goto out; + } + + ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2, + i, &args); + if (ret < 0) { + gpio_free(pic_gpios[i]); + kfree(name); + goto out; + } + + if (gpio_ctrl_np) + of_node_put(gpio_ctrl_np); + gpio_ctrl_np = args.np; + pic_raw_gpios[i] = args.args[0]; + } + + gpio_ctrl = of_iomap(gpio_ctrl_np, 0); + if (!gpio_ctrl) { + ret = -ENOMEM; + goto out; + } + + mvebu_pm_suspend_init(mvebu_armada_pm_enter); + +out: + of_node_put(np); + of_node_put(gpio_ctrl_np); + return ret; +} + +/* + * Registering the mvebu_board_pm_enter callback must be done before + * the platform_suspend_ops will be registered. In the same time we + * also need to have the gpio devices registered. That's why we use a + * device_initcall_sync which is called after all the device_initcall + * (used by the gpio device) but before the late_initcall (used to + * register the platform_suspend_ops) + */ +device_initcall_sync(mvebu_armada_pm_init); diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c new file mode 100644 index 000000000..c487be61d --- /dev/null +++ b/arch/arm/mach-mvebu/pm.c @@ -0,0 +1,270 @@ +/* + * Suspend/resume support. Currently supporting Armada XP only. + * + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/cpu_pm.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mbus.h> +#include <linux/of_address.h> +#include <linux/suspend.h> +#include <asm/cacheflush.h> +#include <asm/outercache.h> +#include <asm/suspend.h> + +#include "coherency.h" +#include "common.h" +#include "pmsu.h" + +#define SDRAM_CONFIG_OFFS 0x0 +#define SDRAM_CONFIG_SR_MODE_BIT BIT(24) +#define SDRAM_OPERATION_OFFS 0x18 +#define SDRAM_OPERATION_SELF_REFRESH 0x7 +#define SDRAM_DLB_EVICTION_OFFS 0x30c +#define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff + +static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd); +static void __iomem *sdram_ctrl; + +static int mvebu_pm_powerdown(unsigned long data) +{ + u32 reg, srcmd; + + flush_cache_all(); + outer_flush_all(); + + /* + * Issue a Data Synchronization Barrier instruction to ensure + * that all state saving has been completed. + */ + dsb(); + + /* Flush the DLB and wait ~7 usec */ + reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS); + reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK; + writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS); + + udelay(7); + + /* Set DRAM in battery backup mode */ + reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS); + reg &= ~SDRAM_CONFIG_SR_MODE_BIT; + writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS); + + /* Prepare to go to self-refresh */ + + srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS); + srcmd &= ~0x1F; + srcmd |= SDRAM_OPERATION_SELF_REFRESH; + + mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd); + + return 0; +} + +#define BOOT_INFO_ADDR 0x3000 +#define BOOT_MAGIC_WORD 0xdeadb002 +#define BOOT_MAGIC_LIST_END 0xffffffff + +/* + * Those registers are accessed before switching the internal register + * base, which is why we hardcode the 0xd0000000 base address, the one + * used by the SoC out of reset. + */ +#define MBUS_WINDOW_12_CTRL 0xd00200b0 +#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080 + +#define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x)) +#define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x)) + +static phys_addr_t mvebu_internal_reg_base(void) +{ + struct device_node *np; + __be32 in_addr[2]; + + np = of_find_node_by_name(NULL, "internal-regs"); + BUG_ON(!np); + + /* + * Ask the DT what is the internal register address on this + * platform. In the mvebu-mbus DT binding, 0xf0010000 + * corresponds to the internal register window. + */ + in_addr[0] = cpu_to_be32(0xf0010000); + in_addr[1] = 0x0; + + return of_translate_address(np, in_addr); +} + +static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr) +{ + phys_addr_t resume_pc; + + resume_pc = __pa_symbol(armada_370_xp_cpu_resume); + + /* + * The bootloader expects the first two words to be a magic + * value (BOOT_MAGIC_WORD), followed by the address of the + * resume code to jump to. Then, it expects a sequence of + * (address, value) pairs, which can be used to restore the + * value of certain registers. This sequence must end with the + * BOOT_MAGIC_LIST_END magic value. + */ + + writel(BOOT_MAGIC_WORD, store_addr++); + writel(resume_pc, store_addr++); + + /* + * Some platforms remap their internal register base address + * to 0xf1000000. However, out of reset, window 12 starts at + * 0xf0000000 and ends at 0xf7ffffff, which would overlap with + * the internal registers. Therefore, disable window 12. + */ + writel(MBUS_WINDOW_12_CTRL, store_addr++); + writel(0x0, store_addr++); + + /* + * Set the internal register base address to the value + * expected by Linux, as read from the Device Tree. + */ + writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++); + writel(mvebu_internal_reg_base(), store_addr++); + + /* + * Ask the mvebu-mbus driver to store the SDRAM window + * configuration, which has to be restored by the bootloader + * before re-entering the kernel on resume. + */ + store_addr += mvebu_mbus_save_cpu_target(store_addr); + + writel(BOOT_MAGIC_LIST_END, store_addr); +} + +static int mvebu_pm_store_bootinfo(void) +{ + u32 *store_addr; + + store_addr = phys_to_virt(BOOT_INFO_ADDR); + + if (of_machine_is_compatible("marvell,armadaxp")) + mvebu_pm_store_armadaxp_bootinfo(store_addr); + else + return -ENODEV; + + return 0; +} + +static int mvebu_enter_suspend(void) +{ + int ret; + + ret = mvebu_pm_store_bootinfo(); + if (ret) + return ret; + + cpu_pm_enter(); + + cpu_suspend(0, mvebu_pm_powerdown); + + outer_resume(); + + mvebu_v7_pmsu_idle_exit(); + + set_cpu_coherent(); + + cpu_pm_exit(); + return 0; +} + +static int mvebu_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + cpu_do_idle(); + break; + case PM_SUSPEND_MEM: + pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n"); + return mvebu_enter_suspend(); + default: + return -EINVAL; + } + return 0; +} + +static int mvebu_pm_valid(suspend_state_t state) +{ + if (state == PM_SUSPEND_STANDBY) + return 1; + + if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL) + return 1; + + return 0; +} + +static const struct platform_suspend_ops mvebu_pm_ops = { + .enter = mvebu_pm_enter, + .valid = mvebu_pm_valid, +}; + +static int __init mvebu_pm_init(void) +{ + if (!of_machine_is_compatible("marvell,armadaxp") && + !of_machine_is_compatible("marvell,armada370") && + !of_machine_is_compatible("marvell,armada380") && + !of_machine_is_compatible("marvell,armada390")) + return -ENODEV; + + suspend_set_ops(&mvebu_pm_ops); + + return 0; +} + + +late_initcall(mvebu_pm_init); + +int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg, + u32 srcmd)) +{ + struct device_node *np; + struct resource res; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-xp-sdram-controller"); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) { + of_node_put(np); + return -ENODEV; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + of_node_put(np); + return -EBUSY; + } + + sdram_ctrl = ioremap(res.start, resource_size(&res)); + if (!sdram_ctrl) { + release_mem_region(res.start, resource_size(&res)); + of_node_put(np); + return -ENOMEM; + } + + of_node_put(np); + + mvebu_board_pm_enter = board_pm_enter; + + return 0; +} diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c new file mode 100644 index 000000000..73d5d72df --- /dev/null +++ b/arch/arm/mach-mvebu/pmsu.c @@ -0,0 +1,609 @@ +/* + * Power Management Service Unit(PMSU) support for Armada 370/XP platforms. + * + * Copyright (C) 2012 Marvell + * + * Yehuda Yitschak <yehuday@marvell.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Armada 370 and Armada XP SOCs have a power management service + * unit which is responsible for powering down and waking up CPUs and + * other SOC units + */ + +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/clk.h> +#include <linux/cpu_pm.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/mbus.h> +#include <linux/mvebu-pmsu.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/slab.h> +#include <linux/smp.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include <asm/suspend.h> +#include <asm/tlbflush.h> +#include "common.h" +#include "pmsu.h" + +#define PMSU_BASE_OFFSET 0x100 +#define PMSU_REG_SIZE 0x1000 + +/* PMSU MP registers */ +#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104) +#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18) +#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16) +#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20) + +#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108) + +#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0) + +#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c) +#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16) +#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17) +#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20) +#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21) +#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22) +#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24) +#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25) + +#define PMSU_EVENT_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x120) +#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE BIT(1) +#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK BIT(17) + +#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124) + +/* PMSU fabric registers */ +#define L2C_NFABRIC_PM_CTL 0x4 +#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) + +/* PMSU delay registers */ +#define PMSU_POWERDOWN_DELAY 0xF04 +#define PMSU_POWERDOWN_DELAY_PMU BIT(1) +#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE +#define PMSU_DFLT_ARMADA38X_DELAY 0x64 + +/* CA9 MPcore SoC Control registers */ + +#define MPCORE_RESET_CTL 0x64 +#define MPCORE_RESET_CTL_L2 BIT(0) +#define MPCORE_RESET_CTL_DEBUG BIT(16) + +#define SRAM_PHYS_BASE 0xFFFF0000 +#define BOOTROM_BASE 0xFFF00000 +#define BOOTROM_SIZE 0x100000 + +#define ARMADA_370_CRYPT0_ENG_TARGET 0x9 +#define ARMADA_370_CRYPT0_ENG_ATTR 0x1 + +extern void ll_disable_coherency(void); +extern void ll_enable_coherency(void); + +extern void armada_370_xp_cpu_resume(void); +extern void armada_38x_cpu_resume(void); + +static phys_addr_t pmsu_mp_phys_base; +static void __iomem *pmsu_mp_base; + +static void *mvebu_cpu_resume; + +static const struct of_device_id of_pmsu_table[] = { + { .compatible = "marvell,armada-370-pmsu", }, + { .compatible = "marvell,armada-370-xp-pmsu", }, + { .compatible = "marvell,armada-380-pmsu", }, + { /* end of list */ }, +}; + +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) +{ + writel(__pa_symbol(boot_addr), pmsu_mp_base + + PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); +} + +extern unsigned char mvebu_boot_wa_start[]; +extern unsigned char mvebu_boot_wa_end[]; + +/* + * This function sets up the boot address workaround needed for SMP + * boot on Armada 375 Z1 and cpuidle on Armada 370. It unmaps the + * BootROM Mbus window, and instead remaps a crypto SRAM into which a + * custom piece of code is copied to replace the problematic BootROM. + */ +int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, + unsigned int crypto_eng_attribute, + phys_addr_t resume_addr_reg) +{ + void __iomem *sram_virt_base; + u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute, + SRAM_PHYS_BASE, SZ_64K); + + sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); + if (!sram_virt_base) { + pr_err("Unable to map SRAM to setup the boot address WA\n"); + return -ENOMEM; + } + + memcpy(sram_virt_base, &mvebu_boot_wa_start, code_len); + + /* + * The last word of the code copied in SRAM must contain the + * physical base address of the PMSU register. We + * intentionally store this address in the native endianness + * of the system. + */ + __raw_writel((unsigned long)resume_addr_reg, + sram_virt_base + code_len - 4); + + iounmap(sram_virt_base); + + return 0; +} + +static int __init mvebu_v7_pmsu_init(void) +{ + struct device_node *np; + struct resource res; + int ret = 0; + + np = of_find_matching_node(NULL, of_pmsu_table); + if (!np) + return 0; + + pr_info("Initializing Power Management Service Unit\n"); + + if (of_address_to_resource(np, 0, &res)) { + pr_err("unable to get resource\n"); + ret = -ENOENT; + goto out; + } + + if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res.start = res.start - PMSU_BASE_OFFSET; + res.end = res.start + PMSU_REG_SIZE - 1; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + ret = -EBUSY; + goto out; + } + + pmsu_mp_phys_base = res.start; + + pmsu_mp_base = ioremap(res.start, resource_size(&res)); + if (!pmsu_mp_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + ret = -ENOMEM; + goto out; + } + + out: + of_node_put(np); + return ret; +} + +static void mvebu_v7_pmsu_enable_l2_powerdown_onidle(void) +{ + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */ + reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL); + reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN; + writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); +} + +enum pmsu_idle_prepare_flags { + PMSU_PREPARE_NORMAL = 0, + PMSU_PREPARE_DEEP_IDLE = BIT(0), + PMSU_PREPARE_SNOOP_DISABLE = BIT(1), +}; + +/* No locking is needed because we only access per-CPU registers */ +static int mvebu_v7_pmsu_idle_prepare(unsigned long flags) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return -EINVAL; + + /* + * Adjust the PMSU configuration to wait for WFI signal, enable + * IRQ and FIQ as wakeup events, set wait for snoop queue empty + * indication and mask IRQ and FIQ from CPU + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_WAKEUP | + PMSU_STATUS_AND_MASK_FIQ_WAKEUP | + PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + /* ask HW to power down the L2 Cache if needed */ + if (flags & PMSU_PREPARE_DEEP_IDLE) + reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + + /* request power down */ + reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + if (flags & PMSU_PREPARE_SNOOP_DISABLE) { + /* Disable snoop disable by HW - SW is taking care of it */ + reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; + writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + } + + return 0; +} + +int armada_370_xp_pmsu_idle_enter(unsigned long deepidle) +{ + unsigned long flags = PMSU_PREPARE_SNOOP_DISABLE; + int ret; + + if (deepidle) + flags |= PMSU_PREPARE_DEEP_IDLE; + + ret = mvebu_v7_pmsu_idle_prepare(flags); + if (ret) + return ret; + + v7_exit_coherency_flush(all); + + ll_disable_coherency(); + + dsb(); + + wfi(); + + /* If we are here, wfi failed. As processors run out of + * coherency for some time, tlbs might be stale, so flush them + */ + local_flush_tlb_all(); + + ll_enable_coherency(); + + /* Test the CR_C bit and set it if it was cleared */ + asm volatile( + "mrc p15, 0, r0, c1, c0, 0 \n\t" + "tst r0, %0 \n\t" + "orreq r0, r0, #(1 << 2) \n\t" + "mcreq p15, 0, r0, c1, c0, 0 \n\t" + "isb " + : : "Ir" (CR_C) : "r0"); + + pr_debug("Failed to suspend the system\n"); + + return 0; +} + +static int armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter); +} + +int armada_38x_do_cpu_suspend(unsigned long deepidle) +{ + unsigned long flags = 0; + + if (deepidle) + flags |= PMSU_PREPARE_DEEP_IDLE; + + mvebu_v7_pmsu_idle_prepare(flags); + /* + * Already flushed cache, but do it again as the outer cache + * functions dirty the cache with spinlocks + */ + v7_exit_coherency_flush(louis); + + scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF); + + cpu_do_idle(); + + return 1; +} + +static int armada_38x_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(false, armada_38x_do_cpu_suspend); +} + +/* No locking is needed because we only access per-CPU registers */ +void mvebu_v7_pmsu_idle_exit(void) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; + /* cancel ask HW to power down the L2 Cache if possible */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* cancel Enable wakeup events and mask interrupts */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT; + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK); + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); +} + +static int mvebu_v7_cpu_pm_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if (action == CPU_PM_ENTER) { + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cpu_resume); + } else if (action == CPU_PM_EXIT) { + mvebu_v7_pmsu_idle_exit(); + } + + return NOTIFY_OK; +} + +static struct notifier_block mvebu_v7_cpu_pm_notifier = { + .notifier_call = mvebu_v7_cpu_pm_notify, +}; + +static struct platform_device mvebu_v7_cpuidle_device; + +static int broken_idle(struct device_node *np) +{ + if (of_property_read_bool(np, "broken-idle")) { + pr_warn("CPU idle is currently broken: disabling\n"); + return 1; + } + + return 0; +} + +static __init int armada_370_cpuidle_init(void) +{ + struct device_node *np; + phys_addr_t redirect_reg; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return -ENODEV; + + if (broken_idle(np)) + goto end; + + /* + * On Armada 370, there is "a slow exit process from the deep + * idle state due to heavy L1/L2 cache cleanup operations + * performed by the BootROM software". To avoid this, we + * replace the restart code of the bootrom by a a simple jump + * to the boot address. Then the code located at this boot + * address will take care of the initialization. + */ + redirect_reg = pmsu_mp_phys_base + PMSU_BOOT_ADDR_REDIRECT_OFFSET(0); + mvebu_setup_boot_addr_wa(ARMADA_370_CRYPT0_ENG_TARGET, + ARMADA_370_CRYPT0_ENG_ATTR, + redirect_reg); + + mvebu_cpu_resume = armada_370_xp_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-370"; + +end: + of_node_put(np); + return 0; +} + +static __init int armada_38x_cpuidle_init(void) +{ + struct device_node *np; + void __iomem *mpsoc_base; + u32 reg; + + pr_warn("CPU idle is currently broken on Armada 38x: disabling\n"); + return 0; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-380-coherency-fabric"); + if (!np) + return -ENODEV; + + if (broken_idle(np)) + goto end; + + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-380-mpcore-soc-ctrl"); + if (!np) + return -ENODEV; + mpsoc_base = of_iomap(np, 0); + BUG_ON(!mpsoc_base); + + /* Set up reset mask when powering down the cpus */ + reg = readl(mpsoc_base + MPCORE_RESET_CTL); + reg |= MPCORE_RESET_CTL_L2; + reg |= MPCORE_RESET_CTL_DEBUG; + writel(reg, mpsoc_base + MPCORE_RESET_CTL); + iounmap(mpsoc_base); + + /* Set up delay */ + reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY); + reg &= ~PMSU_POWERDOWN_DELAY_MASK; + reg |= PMSU_DFLT_ARMADA38X_DELAY; + reg |= PMSU_POWERDOWN_DELAY_PMU; + writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY); + + mvebu_cpu_resume = armada_38x_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x"; + +end: + of_node_put(np); + return 0; +} + +static __init int armada_xp_cpuidle_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return -ENODEV; + + if (broken_idle(np)) + goto end; + + mvebu_cpu_resume = armada_370_xp_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp"; + +end: + of_node_put(np); + return 0; +} + +static int __init mvebu_v7_cpu_pm_init(void) +{ + struct device_node *np; + int ret; + + np = of_find_matching_node(NULL, of_pmsu_table); + if (!np) + return 0; + of_node_put(np); + + /* + * Currently the CPU idle support for Armada 38x is broken, as + * the CPU hotplug uses some of the CPU idle functions it is + * broken too, so let's disable it + */ + if (of_machine_is_compatible("marvell,armada380")) { + cpu_hotplug_disable(); + pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n"); + } + + if (of_machine_is_compatible("marvell,armadaxp")) + ret = armada_xp_cpuidle_init(); + else if (of_machine_is_compatible("marvell,armada370")) + ret = armada_370_cpuidle_init(); + else if (of_machine_is_compatible("marvell,armada380")) + ret = armada_38x_cpuidle_init(); + else + return 0; + + if (ret) + return ret; + + mvebu_v7_pmsu_enable_l2_powerdown_onidle(); + if (mvebu_v7_cpuidle_device.name) + platform_device_register(&mvebu_v7_cpuidle_device); + cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier); + + return 0; +} + +arch_initcall(mvebu_v7_cpu_pm_init); +early_initcall(mvebu_v7_pmsu_init); + +static void mvebu_pmsu_dfs_request_local(void *data) +{ + u32 reg; + u32 cpu = smp_processor_id(); + unsigned long flags; + + local_irq_save(flags); + + /* Prepare to enter idle */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + + /* Request the DFS transition */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu)); + reg |= PMSU_CONTROL_AND_CONFIG_DFS_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu)); + + /* The fact of entering idle will trigger the DFS transition */ + wfi(); + + /* + * We're back from idle, the DFS transition has completed, + * clear the idle wait indication. + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu)); + + local_irq_restore(flags); +} + +int mvebu_pmsu_dfs_request(int cpu) +{ + unsigned long timeout; + int hwcpu = cpu_logical_map(cpu); + u32 reg; + + /* Clear any previous DFS DONE event */ + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE; + writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + + /* Mask the DFS done interrupt, since we are going to poll */ + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + reg |= PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK; + writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + + /* Trigger the DFS on the appropriate CPU */ + smp_call_function_single(cpu, mvebu_pmsu_dfs_request_local, + NULL, false); + + /* Poll until the DFS done event is generated */ + timeout = jiffies + HZ; + while (time_before(jiffies, timeout)) { + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + if (reg & PMSU_EVENT_STATUS_AND_MASK_DFS_DONE) + break; + udelay(10); + } + + if (time_after(jiffies, timeout)) + return -ETIME; + + /* Restore the DFS mask to its original state */ + reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK; + writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu)); + + return 0; +} diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h new file mode 100644 index 000000000..ea79269c2 --- /dev/null +++ b/arch/arm/mach-mvebu/pmsu.h @@ -0,0 +1,24 @@ +/* + * Power Management Service Unit (PMSU) support for Armada 370/XP platforms. + * + * Copyright (C) 2012 Marvell + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MVEBU_PMSU_H +#define __MACH_MVEBU_PMSU_H + +int armada_xp_boot_cpu(unsigned int cpu_id, void *phys_addr); +int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target, + unsigned int crypto_eng_attribute, + phys_addr_t resume_addr_reg); + +void mvebu_v7_pmsu_idle_exit(void); +void armada_370_xp_cpu_resume(void); + +int armada_370_xp_pmsu_idle_enter(unsigned long deepidle); +int armada_38x_do_cpu_suspend(unsigned long deepidle); +#endif /* __MACH_370_XP_PMSU_H */ diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S new file mode 100644 index 000000000..7aae9a25c --- /dev/null +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Gregory Clement <gregory.clement@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + +ENTRY(armada_38x_scu_power_up) + mrc p15, 4, r1, c15, c0 @ get SCU base address + orr r1, r1, #0x8 @ SCU CPU Power Status Register + mrc p15, 0, r0, cr0, cr0, 5 @ get the CPU ID + and r0, r0, #15 + add r1, r1, r0 + mov r0, #0x0 + strb r0, [r1] @ switch SCU power state to Normal mode + ret lr +ENDPROC(armada_38x_scu_power_up) + +/* + * This is the entry point through which CPUs exiting cpuidle deep + * idle state are going. + */ +ENTRY(armada_370_xp_cpu_resume) +ARM_BE8(setend be ) @ go BE8 if entered LE + /* + * Disable the MMU that might have been enabled in BootROM if + * this code is used in the resume path of a suspend/resume + * cycle. + */ + mrc p15, 0, r1, c1, c0, 0 + bic r1, #1 + mcr p15, 0, r1, c1, c0, 0 + bl ll_add_cpu_to_smp_group + bl ll_enable_coherency + b cpu_resume +ENDPROC(armada_370_xp_cpu_resume) + +ENTRY(armada_38x_cpu_resume) + /* do we need it for Armada 38x*/ +ARM_BE8(setend be ) @ go BE8 if entered LE + bl v7_invalidate_l1 + bl armada_38x_scu_power_up + b cpu_resume +ENDPROC(armada_38x_cpu_resume) + +.global mvebu_boot_wa_start +.global mvebu_boot_wa_end + +/* The following code will be executed from SRAM */ +ENTRY(mvebu_boot_wa_start) +ARM_BE8(setend be) + adr r0, 1f + ldr r0, [r0] @ load the address of the + @ resume register + ldr r0, [r0] @ load the value in the + @ resume register +ARM_BE8(rev r0, r0) @ the value is stored LE + mov pc, r0 @ jump to this value +/* + * the last word of this piece of code will be filled by the physical + * address of the boot address register just after being copied in SRAM + */ +1: + .long . +mvebu_boot_wa_end: +ENDPROC(mvebu_boot_wa_end) diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c new file mode 100644 index 000000000..04d9ebe6a --- /dev/null +++ b/arch/arm/mach-mvebu/system-controller.c @@ -0,0 +1,180 @@ +/* + * System controller support for Armada 370, 375 and XP platforms. + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem <alior@marvell.com> + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * The Armada 370, 375 and Armada XP SoCs have a range of + * miscellaneous registers, that do not belong to a particular device, + * but rather provide system-level features. This basic + * system-controller driver provides a device tree binding for those + * registers, and implements utility functions offering various + * features related to those registers. + * + * For now, the feature set is limited to restarting the platform by a + * soft-reset, but it might be extended in the future. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/reboot.h> +#include "common.h" +#include "mvebu-soc-id.h" +#include "pmsu.h" + +#define ARMADA_375_CRYPT0_ENG_TARGET 41 +#define ARMADA_375_CRYPT0_ENG_ATTR 1 + +static void __iomem *system_controller_base; +static phys_addr_t system_controller_phys_base; + +struct mvebu_system_controller { + u32 rstoutn_mask_offset; + u32 system_soft_reset_offset; + + u32 rstoutn_mask_reset_out_en; + u32 system_soft_reset; + + u32 resume_boot_addr; + + u32 dev_id; + u32 rev_id; +}; +static struct mvebu_system_controller *mvebu_sc; + +static const struct mvebu_system_controller armada_370_xp_system_controller = { + .rstoutn_mask_offset = 0x60, + .system_soft_reset_offset = 0x64, + .rstoutn_mask_reset_out_en = 0x1, + .system_soft_reset = 0x1, + .dev_id = 0x38, + .rev_id = 0x3c, +}; + +static const struct mvebu_system_controller armada_375_system_controller = { + .rstoutn_mask_offset = 0x54, + .system_soft_reset_offset = 0x58, + .rstoutn_mask_reset_out_en = 0x1, + .system_soft_reset = 0x1, + .resume_boot_addr = 0xd4, + .dev_id = 0x38, + .rev_id = 0x3c, +}; + +static const struct mvebu_system_controller orion_system_controller = { + .rstoutn_mask_offset = 0x108, + .system_soft_reset_offset = 0x10c, + .rstoutn_mask_reset_out_en = 0x4, + .system_soft_reset = 0x1, +}; + +static const struct of_device_id of_system_controller_table[] = { + { + .compatible = "marvell,orion-system-controller", + .data = (void *) &orion_system_controller, + }, { + .compatible = "marvell,armada-370-xp-system-controller", + .data = (void *) &armada_370_xp_system_controller, + }, { + .compatible = "marvell,armada-375-system-controller", + .data = (void *) &armada_375_system_controller, + }, + { /* end of list */ }, +}; + +void mvebu_restart(enum reboot_mode mode, const char *cmd) +{ + if (!system_controller_base) { + pr_err("Cannot restart, system-controller not available: check the device tree\n"); + } else { + /* + * Enable soft reset to assert RSTOUTn. + */ + writel(mvebu_sc->rstoutn_mask_reset_out_en, + system_controller_base + + mvebu_sc->rstoutn_mask_offset); + /* + * Assert soft reset. + */ + writel(mvebu_sc->system_soft_reset, + system_controller_base + + mvebu_sc->system_soft_reset_offset); + } + + while (1) + ; +} + +int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev) +{ + if (of_machine_is_compatible("marvell,armada380") && + system_controller_base) { + *dev = readl(system_controller_base + mvebu_sc->dev_id) >> 16; + *rev = (readl(system_controller_base + mvebu_sc->rev_id) >> 8) + & 0xF; + return 0; + } else + return -ENODEV; +} + +#if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7) +static void mvebu_armada375_smp_wa_init(void) +{ + u32 dev, rev; + phys_addr_t resume_addr_reg; + + if (mvebu_get_soc_id(&dev, &rev) != 0) + return; + + if (rev != ARMADA_375_Z1_REV) + return; + + resume_addr_reg = system_controller_phys_base + + mvebu_sc->resume_boot_addr; + mvebu_setup_boot_addr_wa(ARMADA_375_CRYPT0_ENG_TARGET, + ARMADA_375_CRYPT0_ENG_ATTR, + resume_addr_reg); +} + +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr) +{ + BUG_ON(system_controller_base == NULL); + BUG_ON(mvebu_sc->resume_boot_addr == 0); + + if (of_machine_is_compatible("marvell,armada375")) + mvebu_armada375_smp_wa_init(); + + writel(__pa_symbol(boot_addr), system_controller_base + + mvebu_sc->resume_boot_addr); +} +#endif + +static int __init mvebu_system_controller_init(void) +{ + const struct of_device_id *match; + struct device_node *np; + + np = of_find_matching_node_and_match(NULL, of_system_controller_table, + &match); + if (np) { + struct resource res; + system_controller_base = of_iomap(np, 0); + of_address_to_resource(np, 0, &res); + system_controller_phys_base = res.start; + mvebu_sc = (struct mvebu_system_controller *)match->data; + of_node_put(np); + } + + return 0; +} + +early_initcall(mvebu_system_controller_init); |