diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-ams-delta.c')
-rw-r--r-- | arch/arm/mach-omap1/board-ams-delta.c | 901 |
1 files changed, 901 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c new file mode 100644 index 000000000..1026a816d --- /dev/null +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -0,0 +1,901 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/arch/arm/mach-omap1/board-ams-delta.c + * + * Modified from board-generic.c + * + * Board specific inits for the Amstrad E3 (codename Delta) videophone + * + * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li> + */ +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/leds.h> +#include <linux/mtd/nand-gpio.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/serial_8250.h> +#include <linux/export.h> +#include <linux/omapfb.h> +#include <linux/io.h> +#include <linux/platform_data/gpio-omap.h> + +#include <asm/serial.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/platform_data/keypad-omap.h> +#include <mach/mux.h> + +#include <mach/hardware.h> +#include <mach/usb.h> + +#include "ams-delta-fiq.h" +#include "board-ams-delta.h" +#include "iomap.h" +#include "common.h" + +static const unsigned int ams_delta_keymap[] = { + KEY(0, 0, KEY_F1), /* Advert */ + + KEY(0, 3, KEY_COFFEE), /* Games */ + KEY(0, 2, KEY_QUESTION), /* Directory */ + KEY(2, 3, KEY_CONNECT), /* Internet */ + KEY(1, 2, KEY_SHOP), /* Services */ + KEY(1, 1, KEY_PHONE), /* VoiceMail */ + + KEY(0, 1, KEY_DELETE), /* Delete */ + KEY(2, 2, KEY_PLAY), /* Play */ + KEY(1, 0, KEY_PAGEUP), /* Up */ + KEY(1, 3, KEY_PAGEDOWN), /* Down */ + KEY(2, 0, KEY_EMAIL), /* ReadEmail */ + KEY(2, 1, KEY_STOP), /* Stop */ + + /* Numeric keypad portion */ + KEY(0, 7, KEY_KP1), + KEY(0, 6, KEY_KP2), + KEY(0, 5, KEY_KP3), + KEY(1, 7, KEY_KP4), + KEY(1, 6, KEY_KP5), + KEY(1, 5, KEY_KP6), + KEY(2, 7, KEY_KP7), + KEY(2, 6, KEY_KP8), + KEY(2, 5, KEY_KP9), + KEY(3, 6, KEY_KP0), + KEY(3, 7, KEY_KPASTERISK), + KEY(3, 5, KEY_KPDOT), /* # key */ + KEY(7, 2, KEY_NUMLOCK), /* Mute */ + KEY(7, 1, KEY_KPMINUS), /* Recall */ + KEY(6, 1, KEY_KPPLUS), /* Redial */ + KEY(7, 6, KEY_KPSLASH), /* Handsfree */ + KEY(6, 0, KEY_ENTER), /* Video */ + + KEY(7, 4, KEY_CAMERA), /* Photo */ + + KEY(0, 4, KEY_F2), /* Home */ + KEY(1, 4, KEY_F3), /* Office */ + KEY(2, 4, KEY_F4), /* Mobile */ + KEY(7, 7, KEY_F5), /* SMS */ + KEY(7, 5, KEY_F6), /* Email */ + + /* QWERTY portion of keypad */ + KEY(3, 4, KEY_Q), + KEY(3, 3, KEY_W), + KEY(3, 2, KEY_E), + KEY(3, 1, KEY_R), + KEY(3, 0, KEY_T), + KEY(4, 7, KEY_Y), + KEY(4, 6, KEY_U), + KEY(4, 5, KEY_I), + KEY(4, 4, KEY_O), + KEY(4, 3, KEY_P), + + KEY(4, 2, KEY_A), + KEY(4, 1, KEY_S), + KEY(4, 0, KEY_D), + KEY(5, 7, KEY_F), + KEY(5, 6, KEY_G), + KEY(5, 5, KEY_H), + KEY(5, 4, KEY_J), + KEY(5, 3, KEY_K), + KEY(5, 2, KEY_L), + + KEY(5, 1, KEY_Z), + KEY(5, 0, KEY_X), + KEY(6, 7, KEY_C), + KEY(6, 6, KEY_V), + KEY(6, 5, KEY_B), + KEY(6, 4, KEY_N), + KEY(6, 3, KEY_M), + KEY(6, 2, KEY_SPACE), + + KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */ + KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ +}; + +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 + +static struct map_desc ams_delta_io_desc[] __initdata = { + /* AMS_DELTA_LATCH1 */ + { + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + }, + /* AMS_DELTA_LATCH2 */ + { + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + }, + /* AMS_DELTA_MODEM */ + { + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), + .length = 0x01000000, + .type = MT_DEVICE + } +}; + +static const struct omap_lcd_config ams_delta_lcd_config __initconst = { + .ctrl_name = "internal", +}; + +static struct omap_usb_config ams_delta_usb_config __initdata = { + .register_host = 1, + .hmc_mode = 16, + .pins[0] = 2, +}; + +#define LATCH1_NGPIO 8 + +static struct resource latch1_resources[] = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +#define LATCH1_LABEL "latch1" + +static struct bgpio_pdata latch1_pdata = { + .label = LATCH1_LABEL, + .base = -1, + .ngpio = LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +#define LATCH1_PIN_LED_CAMERA 0 +#define LATCH1_PIN_LED_ADVERT 1 +#define LATCH1_PIN_LED_MAIL 2 +#define LATCH1_PIN_LED_HANDSFREE 3 +#define LATCH1_PIN_LED_VOICEMAIL 4 +#define LATCH1_PIN_LED_VOICE 5 +#define LATCH1_PIN_DOCKIT1 6 +#define LATCH1_PIN_DOCKIT2 7 + +#define LATCH2_NGPIO 16 + +static struct resource latch2_resources[] = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +#define LATCH2_LABEL "latch2" + +static struct bgpio_pdata latch2_pdata = { + .label = LATCH2_LABEL, + .base = -1, + .ngpio = LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +#define LATCH2_PIN_LCD_VBLEN 0 +#define LATCH2_PIN_LCD_NDISP 1 +#define LATCH2_PIN_NAND_NCE 2 +#define LATCH2_PIN_NAND_NRE 3 +#define LATCH2_PIN_NAND_NWP 4 +#define LATCH2_PIN_NAND_NWE 5 +#define LATCH2_PIN_NAND_ALE 6 +#define LATCH2_PIN_NAND_CLE 7 +#define LATCH2_PIN_KEYBRD_PWR 8 +#define LATCH2_PIN_KEYBRD_DATAOUT 9 +#define LATCH2_PIN_SCARD_RSTIN 10 +#define LATCH2_PIN_SCARD_CMDVCC 11 +#define LATCH2_PIN_MODEM_NRESET 12 +#define LATCH2_PIN_MODEM_CODEC 13 +#define LATCH2_PIN_HANDSFREE_MUTE 14 +#define LATCH2_PIN_HANDSET_MUTE 15 + +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .startup_delay = 25000, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = { + .dev_id = "reg-fixed-voltage", + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +struct modem_private_data { + struct regulator *regulator; +}; + +static struct modem_private_data modem_priv; + +/* + * Define partitions for flash device + */ + +static struct mtd_partition partition_info[] = { + { .name = "Kernel", + .offset = 0, + .size = 3 * SZ_1M + SZ_512K }, + { .name = "u-boot", + .offset = 3 * SZ_1M + SZ_512K, + .size = SZ_256K }, + { .name = "u-boot params", + .offset = 3 * SZ_1M + SZ_512K + SZ_256K, + .size = SZ_256K }, + { .name = "Amstrad LDR", + .offset = 4 * SZ_1M, + .size = SZ_256K }, + { .name = "File system", + .offset = 4 * SZ_1M + 1 * SZ_256K, + .size = 27 * SZ_1M }, + { .name = "PBL reserved", + .offset = 32 * SZ_1M - 3 * SZ_256K, + .size = 3 * SZ_256K }, +}; + +static struct gpio_nand_platdata nand_platdata = { + .parts = partition_info, + .num_parts = ARRAY_SIZE(partition_info), +}; + +static struct platform_device ams_delta_nand_device = { + .name = "ams-delta-nand", + .id = -1, + .dev = { + .platform_data = &nand_platdata, + }, +}; + +#define OMAP_GPIO_LABEL "gpio-0-15" +#define OMAP_MPUIO_LABEL "mpuio" + +static struct gpiod_lookup_table ams_delta_nand_gpio_table = { + .table = { + GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_NAND_RB, "rdy", + 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", + GPIO_ACTIVE_LOW), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 0, "data", 0, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 1, "data", 1, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 2, "data", 2, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 3, "data", 3, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 4, "data", 4, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 5, "data", 5, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 6, "data", 6, 0), + GPIO_LOOKUP_IDX(OMAP_MPUIO_LABEL, 7, "data", 7, 0), + { }, + }, +}; + +static struct resource ams_delta_kp_resources[] = { + [0] = { + .start = INT_KEYBOARD, + .end = INT_KEYBOARD, + .flags = IORESOURCE_IRQ, + }, +}; + +static const struct matrix_keymap_data ams_delta_keymap_data = { + .keymap = ams_delta_keymap, + .keymap_size = ARRAY_SIZE(ams_delta_keymap), +}; + +static struct omap_kp_platform_data ams_delta_kp_data = { + .rows = 8, + .cols = 8, + .keymap_data = &ams_delta_keymap_data, + .delay = 9, +}; + +static struct platform_device ams_delta_kp_device = { + .name = "omap-keypad", + .id = -1, + .dev = { + .platform_data = &ams_delta_kp_data, + }, + .num_resources = ARRAY_SIZE(ams_delta_kp_resources), + .resource = ams_delta_kp_resources, +}; + +static struct platform_device ams_delta_lcd_device = { + .name = "lcd_ams_delta", + .id = -1, +}; + +static struct gpiod_lookup_table ams_delta_lcd_gpio_table = { + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_VBLEN, "vblen", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_NDISP, "ndisp", 0), + { }, + }, +}; + +static struct gpio_led gpio_leds[] __initdata = { + [LATCH1_PIN_LED_CAMERA] = { + .name = "camera", + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + [LATCH1_PIN_LED_ADVERT] = { + .name = "advert", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + [LATCH1_PIN_LED_MAIL] = { + .name = "email", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + [LATCH1_PIN_LED_HANDSFREE] = { + .name = "handsfree", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + [LATCH1_PIN_LED_VOICEMAIL] = { + .name = "voicemail", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + [LATCH1_PIN_LED_VOICE] = { + .name = "voice", + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct gpiod_lookup_table leds_gpio_table = { + .table = { + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_CAMERA, NULL, + LATCH1_PIN_LED_CAMERA, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_ADVERT, NULL, + LATCH1_PIN_LED_ADVERT, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_MAIL, NULL, + LATCH1_PIN_LED_MAIL, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_HANDSFREE, NULL, + LATCH1_PIN_LED_HANDSFREE, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICEMAIL, NULL, + LATCH1_PIN_LED_VOICEMAIL, 0), + GPIO_LOOKUP_IDX(LATCH1_LABEL, LATCH1_PIN_LED_VOICE, NULL, + LATCH1_PIN_LED_VOICE, 0), + { }, + }, +}; + +#ifdef CONFIG_LEDS_TRIGGERS +DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger); +#endif + +static struct platform_device ams_delta_audio_device = { + .name = "ams-delta-audio", + .id = -1, +}; + +static struct gpiod_lookup_table ams_delta_audio_gpio_table = { + .table = { + GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_HOOK_SWITCH, + "hook_switch", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_CODEC, + "modem_codec", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSFREE_MUTE, + "handsfree_mute", 0), + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_HANDSET_MUTE, + "handset_mute", 0), + { }, + }, +}; + +static struct platform_device cx20442_codec_device = { + .name = "cx20442-codec", + .id = -1, +}; + +static struct resource ams_delta_serio_resources[] = { + { + .flags = IORESOURCE_IRQ, + /* + * Initialize IRQ resource with invalid IRQ number. + * It will be replaced with dynamically allocated GPIO IRQ + * obtained from GPIO chip as soon as the chip is available. + */ + .start = -EINVAL, + .end = -EINVAL, + }, +}; + +static struct platform_device ams_delta_serio_device = { + .name = "ams-delta-serio", + .id = PLATFORM_DEVID_NONE, + .dev = { + /* + * Initialize .platform_data explicitly with NULL to + * indicate it is going to be used. It will be replaced + * with FIQ buffer address as soon as FIQ is initialized. + */ + .platform_data = NULL, + }, + .num_resources = ARRAY_SIZE(ams_delta_serio_resources), + .resource = ams_delta_serio_resources, +}; + +static struct regulator_consumer_supply keybrd_pwr_consumers[] = { + /* + * Initialize supply .dev_name with NULL. It will be replaced + * with serio dev_name() as soon as the serio device is registered. + */ + REGULATOR_SUPPLY("vcc", NULL), +}; + +static struct regulator_init_data keybrd_pwr_initdata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(keybrd_pwr_consumers), + .consumer_supplies = keybrd_pwr_consumers, +}; + +static struct fixed_voltage_config keybrd_pwr_config = { + .supply_name = "keybrd_pwr", + .microvolts = 5000000, + .init_data = &keybrd_pwr_initdata, +}; + +static struct platform_device keybrd_pwr_device = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &keybrd_pwr_config, + }, +}; + +static struct gpiod_lookup_table keybrd_pwr_gpio_table = { + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR, NULL, + GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct platform_device *ams_delta_devices[] __initdata = { + &latch1_gpio_device, + &latch2_gpio_device, + &ams_delta_kp_device, + &ams_delta_audio_device, + &ams_delta_serio_device, + &ams_delta_nand_device, + &ams_delta_lcd_device, + &cx20442_codec_device, +}; + +static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { + &ams_delta_nreset_gpiod_table, + &ams_delta_audio_gpio_table, + &keybrd_pwr_gpio_table, + &ams_delta_lcd_gpio_table, + &ams_delta_nand_gpio_table, +}; + +/* + * Some drivers may not use GPIO lookup tables but need to be provided + * with GPIO numbers. The same applies to GPIO based IRQ lines - some + * drivers may even not use GPIO layer but expect just IRQ numbers. + * We could either define GPIO lookup tables then use them on behalf + * of those devices, or we can use GPIO driver level methods for + * identification of GPIO and IRQ numbers. For the purpose of the latter, + * defina a helper function which identifies GPIO chips by their labels. + */ +static int gpiochip_match_by_label(struct gpio_chip *chip, void *data) +{ + char *label = data; + + return !strcmp(label, chip->label); +} + +static struct gpiod_hog ams_delta_gpio_hogs[] = { + GPIO_HOG(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT, "keybrd_dataout", + GPIO_ACTIVE_HIGH, GPIOD_OUT_LOW), + {}, +}; + +static struct plat_serial8250_port ams_delta_modem_ports[]; + +/* + * Obtain MODEM IRQ GPIO descriptor using its hardware pin + * number and assign related IRQ number to the MODEM port. + * Keep the GPIO descriptor open so nobody steps in. + */ +static void __init modem_assign_irq(struct gpio_chip *chip) +{ + struct gpio_desc *gpiod; + + gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ, + "modem_irq", GPIO_ACTIVE_HIGH, + GPIOD_IN); + if (IS_ERR(gpiod)) { + pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__, + PTR_ERR(gpiod)); + } else { + ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod); + } +} + +/* + * The purpose of this function is to take care of proper initialization of + * devices and data structures which depend on GPIO lines provided by OMAP GPIO + * banks but their drivers don't use GPIO lookup tables or GPIO layer at all. + * The function may be called as soon as OMAP GPIO devices are probed. + * Since that happens at postcore_initcall, it can be called successfully + * from init_machine or later. + * Dependent devices may be registered from within this function or later. + */ +static void __init omap_gpio_deps_init(void) +{ + struct gpio_chip *chip; + + chip = gpiochip_find(OMAP_GPIO_LABEL, gpiochip_match_by_label); + if (!chip) { + pr_err("%s: OMAP GPIO chip not found\n", __func__); + return; + } + + /* + * Start with FIQ initialization as it may have to request + * and release successfully each OMAP GPIO pin in turn. + */ + ams_delta_init_fiq(chip, &ams_delta_serio_device); + + modem_assign_irq(chip); +} + +/* + * Initialize latch2 pins with values which are safe for dependent on-board + * devices or useful for their successull initialization even before GPIO + * driver takes control over the latch pins: + * - LATCH2_PIN_LCD_VBLEN = 0 + * - LATCH2_PIN_LCD_NDISP = 0 Keep LCD device powered off before its + * driver takes control over it. + * - LATCH2_PIN_NAND_NCE = 0 + * - LATCH2_PIN_NAND_NWP = 0 Keep NAND device down and write- + * protected before its driver takes + * control over it. + * - LATCH2_PIN_KEYBRD_PWR = 0 Keep keyboard powered off before serio + * driver takes control over it. + * - LATCH2_PIN_KEYBRD_DATAOUT = 0 Keep low to avoid corruption of first + * byte of data received from attached + * keyboard when serio device is probed; + * the pin is also hogged low by the latch2 + * GPIO driver as soon as it is ready. + * - LATCH2_PIN_MODEM_NRESET = 1 Enable voice MODEM device, allowing for + * its successful probe even before a + * regulator it depends on, which in turn + * takes control over the pin, is set up. + * - LATCH2_PIN_MODEM_CODEC = 1 Attach voice MODEM CODEC data port + * to the MODEM so the CODEC is under + * control even if audio driver doesn't + * take it over. + */ +static void __init ams_delta_latch2_init(void) +{ + u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC; + + __raw_writew(latch2, LATCH2_VIRT); +} + +static void __init ams_delta_init(void) +{ + struct platform_device *leds_pdev; + + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + + /* parallel camera interface */ + omap_cfg_reg(H19_1610_CAM_EXCLK); + omap_cfg_reg(J15_1610_CAM_LCLK); + omap_cfg_reg(L18_1610_CAM_VS); + omap_cfg_reg(L15_1610_CAM_HS); + omap_cfg_reg(L19_1610_CAM_D0); + omap_cfg_reg(K14_1610_CAM_D1); + omap_cfg_reg(K15_1610_CAM_D2); + omap_cfg_reg(K19_1610_CAM_D3); + omap_cfg_reg(K18_1610_CAM_D4); + omap_cfg_reg(J14_1610_CAM_D5); + omap_cfg_reg(J19_1610_CAM_D6); + omap_cfg_reg(J18_1610_CAM_D7); + + omap_gpio_deps_init(); + ams_delta_latch2_init(); + gpiod_add_hogs(ams_delta_gpio_hogs); + + omap_serial_init(); + omap_register_i2c_bus(1, 100, NULL, 0); + + omap1_usb_init(&ams_delta_usb_config); +#ifdef CONFIG_LEDS_TRIGGERS + led_trigger_register_simple("ams_delta_camera", + &ams_delta_camera_led_trigger); +#endif + platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + + /* + * As soon as regulator consumers have been registered, assign their + * dev_names to consumer supply entries of respective regulators. + */ + keybrd_pwr_consumers[0].dev_name = + dev_name(&ams_delta_serio_device.dev); + + /* + * Once consumer supply entries are populated with dev_names, + * register regulator devices. At this stage only the keyboard + * power regulator has its consumer supply table fully populated. + */ + platform_device_register(&keybrd_pwr_device); + + /* + * As soon as GPIO consumers have been registered, assign + * their dev_names to respective GPIO lookup tables. + */ + ams_delta_audio_gpio_table.dev_id = + dev_name(&ams_delta_audio_device.dev); + keybrd_pwr_gpio_table.dev_id = dev_name(&keybrd_pwr_device.dev); + ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev); + ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev); + + /* + * Once GPIO lookup tables are populated with dev_names, register them. + */ + gpiod_add_lookup_tables(ams_delta_gpio_tables, + ARRAY_SIZE(ams_delta_gpio_tables)); + + leds_pdev = gpio_led_register_device(PLATFORM_DEVID_NONE, &leds_pdata); + if (!IS_ERR_OR_NULL(leds_pdev)) { + leds_gpio_table.dev_id = dev_name(&leds_pdev->dev); + gpiod_add_lookup_table(&leds_gpio_table); + } + + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); + + omapfb_set_lcd_config(&ams_delta_lcd_config); +} + +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + int ret; + + if (!priv) + return; + + if (IS_ERR(priv->regulator)) + return; + + if (state == old) + return; + + if (state == 0) + ret = regulator_enable(priv->regulator); + else if (old == 0) + ret = regulator_disable(priv->regulator); + else + ret = 0; + + if (ret) + dev_warn(port->dev, + "ams_delta modem_pm: failed to %sable regulator: %d\n", + state ? "dis" : "en", ret); +} + +static struct plat_serial8250_port ams_delta_modem_ports[] = { + { + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, + .irq = IRQ_NOTCONNECTED, /* changed later */ + .flags = UPF_BOOT_AUTOCONF, + .irqflags = IRQF_TRIGGER_RISING, + .iotype = UPIO_MEM, + .regshift = 1, + .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, + }, + { }, +}; + +static struct platform_device ams_delta_modem_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM1, + .dev = { + .platform_data = ams_delta_modem_ports, + }, +}; + +static int __init modem_nreset_init(void) +{ + int err; + + err = platform_device_register(&modem_nreset_device); + if (err) + pr_err("Couldn't register the modem regulator device\n"); + + return err; +} + + +/* + * This function expects MODEM IRQ number already assigned to the port. + * The MODEM device requires its RESET# pin kept high during probe. + * That requirement can be fulfilled in several ways: + * - with a descriptor of already functional modem_nreset regulator + * assigned to the MODEM private data, + * - with the regulator not yet controlled by modem_pm function but + * already enabled by default on probe, + * - before the modem_nreset regulator is probed, with the pin already + * set high explicitly. + * The last one is already guaranteed by ams_delta_latch2_init() called + * from machine_init. + * In order to avoid taking over ttyS0 device slot, the MODEM device + * should be registered after OMAP serial ports. Since those ports + * are registered at arch_initcall, this function can be called safely + * at arch_initcall_sync earliest. + */ +static int __init ams_delta_modem_init(void) +{ + int err; + + if (!machine_is_ams_delta()) + return -ENODEV; + + omap_cfg_reg(M14_1510_GPIO2); + + /* Initialize the modem_nreset regulator consumer before use */ + modem_priv.regulator = ERR_PTR(-ENODEV); + + err = platform_device_register(&ams_delta_modem_device); + + return err; +} +arch_initcall_sync(ams_delta_modem_init); + +static int __init late_init(void) +{ + int err; + + err = modem_nreset_init(); + if (err) + return err; + + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } + return 0; + +unregister: + platform_device_unregister(&ams_delta_modem_device); + return err; +} + +static void __init ams_delta_init_late(void) +{ + omap1_init_late(); + late_init(); +} + +static void __init ams_delta_map_io(void) +{ + omap15xx_map_io(); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); +} + +MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") + /* Maintainer: Jonathan McDowell <noodles@earth.li> */ + .atag_offset = 0x100, + .map_io = ams_delta_map_io, + .init_early = omap1_init_early, + .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, + .init_machine = ams_delta_init, + .init_late = ams_delta_init_late, + .init_time = omap1_timer_init, + .restart = omap1_restart, +MACHINE_END |