diff options
Diffstat (limited to 'arch/arm/mach-pxa/Kconfig')
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 683 |
1 files changed, 683 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig new file mode 100644 index 000000000..f7520a6cc --- /dev/null +++ b/arch/arm/mach-pxa/Kconfig @@ -0,0 +1,683 @@ +# SPDX-License-Identifier: GPL-2.0-only +if ARCH_PXA + +menu "Intel PXA2xx/PXA3xx Implementations" + +comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" + +config MACH_PXA25X_DT + bool "Support PXA25x platforms from device tree" + select PINCTRL + select POWER_SUPPLY + select PXA25x + select USE_OF + help + Include support for Marvell PXA25x based platforms using + the device tree. Needn't select any other machine while + MACH_PXA25x_DT is enabled. + +config MACH_PXA27X_DT + bool "Support PXA27x platforms from device tree" + select PINCTRL + select POWER_SUPPLY + select PXA27x + select USE_OF + help + Include support for Marvell PXA27x based platforms using + the device tree. Needn't select any other machine while + MACH_PXA27X_DT is enabled. + +config MACH_PXA3XX_DT + bool "Support PXA3xx platforms from device tree" + select CPU_PXA300 + select PINCTRL + select POWER_SUPPLY + select PXA3xx + select USE_OF + help + Include support for Marvell PXA3xx based platforms using + the device tree. Needn't select any other machine while + MACH_PXA3XX_DT is enabled. + +config ARCH_LUBBOCK + bool "Intel DBPXA250 Development Platform (aka Lubbock)" + select GPIO_REG + select PXA25x + select SA1111 + +config MACH_MAINSTONE + bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" + select GPIO_REG + select PXA27x + +config MACH_ZYLONITE + bool + select PXA3xx + +config MACH_ZYLONITE300 + bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" + select CPU_PXA300 + select CPU_PXA310 + select MACH_ZYLONITE + +config MACH_ZYLONITE320 + bool "PXA3xx Development Platform (aka Zylonite) PXA320" + select CPU_PXA320 + select MACH_ZYLONITE + +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select CPU_PXA300 + select CPU_PXA310 + select PXA3xx + +config MACH_TAVOREVB + bool "PXA930 Evaluation Board (aka TavorEVB)" + select CPU_PXA930 + select CPU_PXA935 + select PXA3xx + select FB + select FB_PXA + +config MACH_SAAR + bool "PXA930 Handheld Platform (aka SAAR)" + select CPU_PXA930 + select CPU_PXA935 + select PXA3xx + select FB + select FB_PXA + +comment "Third Party Dev Platforms (sorted by vendor name)" + +config ARCH_PXA_IDP + bool "Accelent Xscale IDP" + select PXA25x + +config ARCH_VIPER + bool "Arcom/Eurotech VIPER SBC" + select ARCOM_PCMCIA + select I2C_GPIO if I2C=y + select ISA + select PXA25x + +config MACH_ARCOM_ZEUS + bool "Arcom/Eurotech ZEUS SBC" + select ARCOM_PCMCIA + select ISA + select PXA27x + +config MACH_BALLOON3 + bool "Balloon 3 board" + select IWMMXT + select PXA27x + +config MACH_CSB726 + bool "Enable Cogent CSB726 System On a Module" + select IWMMXT + select PXA27x + help + Say Y here if you intend to run this kernel on a Cogent + CSB726 System On Module. + +config CSB726_CSB701 + bool "Enable support for CSB701 baseboard" + depends on MACH_CSB726 + +config MACH_CM_X300 + bool "CompuLab CM-X300 modules" + select CPU_PXA300 + select CPU_PXA310 + select PXA3xx + +config MACH_CAPC7117 + bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" + select CPU_PXA320 + select PXA3xx + +config ARCH_GUMSTIX + bool "Gumstix XScale 255 boards" + select PXA25x + help + Say Y here if you intend to run this kernel on + Basix, Connex, ws-200ax, ws-400ax systems + +choice + prompt "Gumstix Carrier/Expansion Board" + depends on ARCH_GUMSTIX + +config GUMSTIX_AM200EPD + bool "Enable AM200EPD board support" + +config GUMSTIX_AM300EPD + bool "Enable AM300EPD board support" + +endchoice + +config MACH_INTELMOTE2 + bool "Intel Mote 2 Platform" + select IWMMXT + select PXA27x + +config MACH_STARGATE2 + bool "Intel Stargate 2 Platform" + select IWMMXT + select PXA27x + +config MACH_XCEP + bool "Iskratel Electronics XCEP" + select MTD + select MTD_CFI + select MTD_CFI_INTELEXT + select MTD_PHYSMAP + select PXA25x + help + PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. + Tuned for usage in Libera instruments for particle accelerators. + +config TRIZEPS_PXA + bool "PXA based Keith und Koep Trizeps DIMM-Modules" + +config MACH_TRIZEPS4 + bool "Keith und Koep Trizeps4 DIMM-Module" + depends on TRIZEPS_PXA + select PXA27x + select TRIZEPS_PCMCIA + +config MACH_TRIZEPS4WL + bool "Keith und Koep Trizeps4-WL DIMM-Module" + depends on TRIZEPS_PXA + select MACH_TRIZEPS4 + select PXA27x + select TRIZEPS_PCMCIA + +choice + prompt "Select base board for Trizeps module" + depends on TRIZEPS_PXA + +config MACH_TRIZEPS_CONXS + bool "ConXS Eval Board" + +config MACH_TRIZEPS_UCONXS + bool "uConXS Eval Board" + +config MACH_TRIZEPS_ANY + bool "another Board" + +endchoice + +config ARCOM_PCMCIA + bool + help + Generic option for Arcom Viper/Zeus PCMCIA + +config TRIZEPS_PCMCIA + bool + help + Enable PCMCIA support for Trizeps modules + +config MACH_LOGICPD_PXA270 + bool "LogicPD PXA270 Card Engine Development Platform" + select PXA27x + +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" + select IWMMXT + select PXA27x + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + depends on MACH_PCM027 + +choice + prompt "display on pcm990" + depends on MACH_PCM990_BASEBOARD + +config PCM990_DISPLAY_SHARP + bool "sharp lq084v1dg21 stn display" + +config PCM990_DISPLAY_NEC + bool "nec nl6448bc20_18d tft display" + +config PCM990_DISPLAY_NONE + bool "no display" + +endchoice + +config MACH_COLIBRI + bool "Toradex Colibri PXA270" + select PXA27x + +config MACH_COLIBRI_PXA270_INCOME + bool "Income s.r.o. PXA270 SBC" + depends on MACH_COLIBRI + select PXA27x + +config MACH_COLIBRI300 + bool "Toradex Colibri PXA300/310" + select CPU_PXA300 + select CPU_PXA310 + select PXA3xx + +config MACH_COLIBRI320 + bool "Toradex Colibri PXA320" + select CPU_PXA320 + select PXA3xx + +config MACH_COLIBRI_EVALBOARD + bool "Toradex Colibri Evaluation Carrier Board support" + depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 + +config MACH_VPAC270 + bool "Voipac PXA270" + select HAVE_PATA_PLATFORM + select PXA27x + help + PXA270 based Single Board Computer. + +comment "End-user Products (sorted by vendor name)" + +config MACH_H4700 + bool "HP iPAQ hx4700" + select IWMMXT + select PXA27x + +config MACH_H5000 + bool "HP iPAQ h5000" + select PXA25x + +config MACH_HIMALAYA + bool "HTC Himalaya Support" + select CPU_PXA26x + +config MACH_MAGICIAN + bool "Enable HTC Magician Support" + select IWMMXT + select PXA27x + +config MACH_MIOA701 + bool "Mitac Mio A701 Support" + select IWMMXT + select PXA27x + help + Say Y here if you intend to run this kernel on a + MIO A701. Currently there is only basic support + for this PDA. + +config PXA_EZX + bool "Motorola EZX Platform" + select IWMMXT + select PXA27x + +config MACH_EZX_A780 + bool "Motorola EZX A780" + default y + depends on PXA_EZX + +config MACH_EZX_E680 + bool "Motorola EZX E680" + default y + depends on PXA_EZX + +config MACH_EZX_A1200 + bool "Motorola EZX A1200" + default y + depends on PXA_EZX + +config MACH_EZX_A910 + bool "Motorola EZX A910" + default y + depends on PXA_EZX + +config MACH_EZX_E6 + bool "Motorola EZX E6" + default y + depends on PXA_EZX + +config MACH_EZX_E2 + bool "Motorola EZX E2" + default y + depends on PXA_EZX + +config MACH_MP900C + bool "Nec Mobilepro 900/c" + select PXA25x + +config ARCH_PXA_PALM + bool "PXA based Palm PDAs" + +config MACH_PALM27X + bool + +config MACH_PALMTE2 + bool "Palm Tungsten|E2" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|E2 + handheld computer. + +config MACH_PALMTC + bool "Palm Tungsten|C" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|C + handheld computer. + +config MACH_PALMT5 + bool "Palm Tungsten|T5" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|T5 + handheld computer. + +config MACH_PALMTX + bool "Palm T|X" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on a Palm T|X + handheld computer. + +config MACH_PALMZ72 + bool "Palm Zire 72" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on Palm Zire 72 + handheld computer. + +config MACH_PALMLD + bool "Palm LifeDrive" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PXA27x + help + Say Y here if you intend to run this kernel on a Palm LifeDrive + handheld computer. + +config PALM_TREO + bool + depends on ARCH_PXA_PALM + +config MACH_CENTRO + bool "Palm Centro 685 (GSM)" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PALM_TREO + select PXA27x + help + Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) + smartphone. + +config MACH_TREO680 + bool "Palm Treo 680" + default y + depends on ARCH_PXA_PALM + select IWMMXT + select MACH_PALM27X + select PALM_TREO + select PXA27x + help + Say Y here if you intend to run this kernel on Palm Treo 680 + smartphone. + +config PXA_SHARPSL + bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" + select SHARP_PARAM + select SHARP_SCOOP + help + Say Y here if you intend to run this kernel on a + Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), + SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), + SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) + handheld computer. + +config PXA_SHARPSL_DETECT_MACH_ID + bool "Detect machine ID at run-time in the decompressor" + depends on PXA_SHARPSL + help + Say Y here if you want the zImage decompressor to detect + the Zaurus machine ID at run-time. For latest kexec-based + boot loader, this is not necessary. + +config MACH_POODLE + bool "Enable Sharp SL-5600 (Poodle) Support" + depends on PXA_SHARPSL + select PXA25x + select SHARP_LOCOMO + +config MACH_CORGI + bool "Enable Sharp SL-C700 (Corgi) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx + +config MACH_SHEPHERD + bool "Enable Sharp SL-C750 (Shepherd) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx + +config MACH_HUSKY + bool "Enable Sharp SL-C760 (Husky) Support" + depends on PXA_SHARPSL + select PXA25x + select PXA_SHARP_C7xx + +config MACH_AKITA + bool "Enable Sharp SL-1000 (Akita) Support" + depends on PXA_SHARPSL + select I2C + select I2C_PXA + select MACH_SPITZ + select PXA27x + select PXA_SHARP_Cxx00 + +config MACH_SPITZ + bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 + +config MACH_BORZOI + bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" + depends on PXA_SHARPSL + select PXA27x + select PXA_SHARP_Cxx00 + +config MACH_TOSA + bool "Enable Sharp SL-6000x (Tosa) Support" + depends on PXA_SHARPSL + select PXA25x + +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA && NET + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + +config TOSA_USE_EXT_KEYCODES + bool "Tosa keyboard: use extended keycodes" + depends on MACH_TOSA + help + Say Y here to enable the tosa keyboard driver to generate extended + (>= 127) keycodes. Be aware, that they can't be correctly interpreted + by either console keyboard driver or by Kdrive keybd driver. + + Say Y only if you know, what you are doing! + +config MACH_ICONTROL + bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" + select CPU_PXA320 + select PXA3xx + +config ARCH_PXA_ESERIES + bool "PXA based Toshiba e-series PDAs" + select FB_W100 + select FB + select PXA25x + +config MACH_E330 + bool "Toshiba e330" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e330 family PDA. + +config MACH_E350 + bool "Toshiba e350" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e350 family PDA. + +config MACH_E740 + bool "Toshiba e740" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e740 family PDA. + +config MACH_E750 + bool "Toshiba e750" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e750 family PDA. + +config MACH_E400 + bool "Toshiba e400" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e400 family PDA. + +config MACH_E800 + bool "Toshiba e800" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e800 family PDA. + +config MACH_ZIPIT2 + bool "Zipit Z2 Handheld" + select PXA27x +endmenu + +config PXA25x + bool + select CPU_XSCALE + help + Select code specific to PXA21x/25x/26x variants + +config PXA27x + bool + select CPU_XSCALE + help + Select code specific to PXA27x variants + +config CPU_PXA26x + bool + select PXA25x + help + Select code specific to PXA26x (codename Dalhart) + +config PXA3xx + bool + select CPU_XSC3 + help + Select code specific to PXA3xx variants + +config CPU_PXA300 + bool + select PXA3xx + help + PXA300 (codename Monahans-L) + +config CPU_PXA310 + bool + select CPU_PXA300 + select PXA310_ULPI if USB_ULPI + help + PXA310 (codename Monahans-LV) + +config CPU_PXA320 + bool + select PXA3xx + help + PXA320 (codename Monahans-P) + +config CPU_PXA930 + bool + select PXA3xx + help + PXA930 (codename Tavor-P) + +config CPU_PXA935 + bool + select CPU_PXA930 + help + PXA935 (codename Tavor-P65) + +config PXA_SHARP_C7xx + bool + select SHARPSL_PM + help + Enable support for all Sharp C7xx models + +config PXA_SHARP_Cxx00 + bool + select SHARPSL_PM + help + Enable common support for Sharp Cxx00 models + +config SHARPSL_PM + bool + select APM_EMULATION + select SHARPSL_PM_MAX1111 + +config SHARPSL_PM_MAX1111 + bool + select HWMON + select SENSORS_MAX1111 + select SPI + select SPI_MASTER + +config PXA310_ULPI + bool + +config PXA_SYSTEMS_CPLDS + tristate "Motherboard cplds" + default ARCH_LUBBOCK || MACH_MAINSTONE + help + This driver supports the Lubbock and Mainstone multifunction chip + found on the pxa25x development platform system (Lubbock) and pxa27x + development platform system (Mainstone). This IO board supports the + interrupts handling, ethernet controller, flash chips, etc ... + +endif |