diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/mach-s3c/Kconfig.s3c64xx | 350 |
1 files changed, 350 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx new file mode 100644 index 000000000..f3fcb570e --- /dev/null +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx @@ -0,0 +1,350 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright 2008 Openmoko, Inc. +# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> + +menuconfig ARCH_S3C64XX + bool "Samsung S3C64XX" + depends on ARCH_MULTI_V6 + select ARM_AMBA + select ARM_VIC + select CLKSRC_SAMSUNG_PWM + select COMMON_CLK_SAMSUNG + select GPIO_SAMSUNG if ATAGS + select GPIOLIB + select HAVE_S3C2410_I2C if I2C + select HAVE_TCM + select PLAT_SAMSUNG + select PM_GENERIC_DOMAINS if PM + select S3C_DEV_NAND if ATAGS + select S3C_GPIO_TRACK if ATAGS + select S3C2410_WATCHDOG + select SAMSUNG_ATAGS if ATAGS + select SAMSUNG_WAKEMASK if PM + select WATCHDOG + help + Samsung S3C64XX series based systems + +if ARCH_S3C64XX + +# Configuration options for the S3C6410 CPU + +config CPU_S3C6400 + bool + help + Enable S3C6400 CPU support + +config CPU_S3C6410 + bool + help + Enable S3C6410 CPU support + +config S3C64XX_PL080 + def_bool DMADEVICES + select AMBA_PL08X + +config S3C64XX_SETUP_SDHCI + bool + select S3C64XX_SETUP_SDHCI_GPIO + help + Internal configuration for default SDHCI setup for S3C6400 and + S3C6410 SoCs. + +config S3C64XX_DEV_ONENAND1 + bool + help + Compile in platform device definition for OneNAND1 controller + +config SAMSUNG_DEV_BACKLIGHT + bool + depends on SAMSUNG_DEV_PWM + help + Compile in platform device definition LCD backlight with PWM Timer + +# platform specific device setup + +config S3C64XX_SETUP_I2C0 + bool + default y + help + Common setup code for i2c bus 0. + + Note, currently since i2c0 is always compiled, this setup helper + is always compiled with it. + +config S3C64XX_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config S3C64XX_SETUP_IDE + bool + help + Common setup code for S3C64XX IDE. + +config S3C64XX_SETUP_FB_24BPP + bool + help + Common setup code for S3C64XX with an 24bpp RGB display helper. + +config S3C64XX_SETUP_KEYPAD + bool + help + Common setup code for S3C64XX KEYPAD GPIO configurations + +config S3C64XX_SETUP_SDHCI_GPIO + bool + help + Common setup code for S3C64XX SDHCI GPIO configurations + +config S3C64XX_SETUP_SPI + bool + help + Common setup code for SPI GPIO configurations + +config S3C64XX_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + +# S36400 Macchine support + +config MACH_SMDK6400 + bool "SMDK6400" + depends on ATAGS + select CPU_S3C6400 + select S3C64XX_SETUP_SDHCI + select S3C_DEV_HSMMC1 + help + Machine support for the Samsung SMDK6400 + +# S3C6410 machine support + +config MACH_ANW6410 + bool "A&W6410" + depends on ATAGS + select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_FB + help + Machine support for the A&W6410 + +config MACH_MINI6410 + bool "MINI6410" + depends on ATAGS + select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_SDHCI + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + help + Machine support for the FriendlyARM MINI6410 + +config MACH_REAL6410 + bool "REAL6410" + depends on ATAGS + select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_SDHCI + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_TS + help + Machine support for the CoreWind REAL6410 + +config MACH_SMDK6410 + bool "SMDK6410" + depends on ATAGS + select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE + select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_IDE + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_TS + help + Machine support for the Samsung SMDK6410 + +# At least some of the SMDK6410s were shipped with the card detect +# for the MMC/SD slots connected to the same input. This means that +# either the boards need to be altered to have channel0 to an alternate +# configuration or that only one slot can be used. + +choice + prompt "SMDK6410 MMC/SD slot setup" + depends on MACH_SMDK6410 + +config SMDK6410_SD_CH0 + bool "Use channel 0 only" + depends on MACH_SMDK6410 + help + Select CON7 (channel 0) as the MMC/SD slot, as + at least some SMDK6410 boards come with the + resistors fitted so that the card detects for + channels 0 and 1 are the same. + +config SMDK6410_SD_CH1 + bool "Use channel 1 only" + depends on MACH_SMDK6410 + help + Select CON6 (channel 1) as the MMC/SD slot, as + at least some SMDK6410 boards come with the + resistors fitted so that the card detects for + channels 0 and 1 are the same. + +endchoice + +config SMDK6410_WM1190_EV1 + bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" + depends on MACH_SMDK6410 + depends on I2C=y + select MFD_WM8350_I2C + select REGULATOR + select REGULATOR_WM8350 + help + The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC + and audio daughtercard for the Samsung SMDK6410 reference + platform. Enabling this option will build support for this + module into the kernel. The presence of the module will be + detected at runtime so the resulting kernel can be used + with or without the 1190-EV1 fitted. + +config SMDK6410_WM1192_EV1 + bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" + depends on MACH_SMDK6410 + depends on I2C=y + select MFD_WM831X + select MFD_WM831X_I2C + select REGULATOR + select REGULATOR_WM831X + help + The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC + daughtercard for the Samsung SMDK6410 reference platform. + Enabling this option will build support for this module into + the kernel. The presence of the daughtercard will be + detected at runtime so the resulting kernel can be used + with or without the 1192-EV1 fitted. + +config MACH_NCP + bool "NCP" + depends on ATAGS + select CPU_S3C6410 + select S3C64XX_SETUP_I2C1 + select S3C_DEV_HSMMC1 + select S3C_DEV_I2C1 + help + Machine support for the Samsung NCP + +config MACH_HMT + bool "Airgoo HMT" + depends on ATAGS + select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C_DEV_FB + select S3C_DEV_NAND + select S3C_DEV_USB_HOST + select SAMSUNG_DEV_PWM + help + Machine support for the Airgoo HMT + +config MACH_SMARTQ + bool + select CPU_S3C6410 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HWMON + select S3C_DEV_RTC + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_TS + help + Shared machine support for SmartQ 5/7 + +config MACH_SMARTQ5 + bool "SmartQ 5" + depends on ATAGS + select MACH_SMARTQ + help + Machine support for the SmartQ 5 + +config MACH_SMARTQ7 + bool "SmartQ 7" + depends on ATAGS + select MACH_SMARTQ + help + Machine support for the SmartQ 7 + +config MACH_WLF_CRAGG_6410 + bool "Wolfson Cragganmore 6410" + depends on ATAGS + depends on I2C=y + select CPU_S3C6410 + select LEDS_GPIO_REGISTER + select S3C64XX_DEV_SPI0 + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE + select S3C64XX_SETUP_KEYPAD + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_SPI + select S3C64XX_SETUP_USB_PHY + select S3C_DEV_FB + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_RTC + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM + help + Machine support for the Wolfson Cragganmore S3C6410 variant. + +config MACH_S3C64XX_DT + bool "Samsung S3C6400/S3C6410 machine using Device Tree" + select CPU_S3C6400 + select CPU_S3C6410 + select PINCTRL + select PINCTRL_S3C64XX + help + Machine support for Samsung S3C6400/S3C6410 machines with Device Tree + enabled. + Select this if a fdt blob is available for your S3C64XX SoC based + board. + Note: This is under development and not all peripherals can be + supported with this machine file. + +endif |