diff options
Diffstat (limited to 'arch/arm/mach-s3c/mach-amlm5900.c')
| -rw-r--r-- | arch/arm/mach-s3c/mach-amlm5900.c | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c/mach-amlm5900.c b/arch/arm/mach-s3c/mach-amlm5900.c new file mode 100644 index 000000000..94c4512ac --- /dev/null +++ b/arch/arm/mach-s3c/mach-amlm5900.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2006 American Microsystems Limited +// David Anders <danders@amltd.com> +// +// @History: +// derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by +// Ben Dooks <ben@simtec.co.uk> + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/gpio/machine.h> +#include <linux/gpio.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/proc_fs.h> +#include <linux/serial_core.h> +#include <linux/serial_s3c.h> +#include <linux/io.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/flash.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> +#include <linux/platform_data/fb-s3c2410.h> + +#include "regs-gpio.h" +#include "gpio-samsung.h" + +#include <linux/platform_data/i2c-s3c2410.h> +#include "devs.h" +#include "cpu.h" +#include "gpio-cfg.h" + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> + +#include "s3c24xx.h" + +static struct resource amlm5900_nor_resource = + DEFINE_RES_MEM(0x00000000, SZ_16M); + +static struct mtd_partition amlm5900_mtd_partitions[] = { + { + .name = "System", + .size = 0x240000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + .name = "Kernel", + .size = 0x100000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Ramdisk", + .size = 0x300000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "JFFS2", + .size = 0x9A0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "Settings", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data amlm5900_flash_data = { + .width = 2, + .parts = amlm5900_mtd_partitions, + .nr_parts = ARRAY_SIZE(amlm5900_mtd_partitions), +}; + +static struct platform_device amlm5900_device_nor = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &amlm5900_flash_data, + }, + .num_resources = 1, + .resource = &amlm5900_nor_resource, +}; + +static struct map_desc amlm5900_iodesc[] __initdata = { +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg amlm5900_uartcfgs[] = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + } +}; + +static struct gpiod_lookup_table amlm5900_mmc_gpio_table = { + .dev_id = "s3c2410-sdi", + .table = { + /* bus pins */ + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH), + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct platform_device *amlm5900_devices[] __initdata = { +#ifdef CONFIG_FB_S3C2410 + &s3c_device_lcd, +#endif + &s3c_device_adc, + &s3c_device_wdt, + &s3c_device_i2c0, + &s3c_device_ohci, + &s3c_device_rtc, + &s3c_device_usbgadget, + &s3c_device_sdi, + &amlm5900_device_nor, +}; + +static void __init amlm5900_map_io(void) +{ + s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); + s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); + s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4); +} + +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + s3c24xx_timer_init(); +} + +#ifdef CONFIG_FB_S3C2410 +static struct s3c2410fb_display __initdata amlm5900_lcd_info = { + .width = 160, + .height = 160, + + .type = S3C2410_LCDCON1_STN4, + + .pixclock = 680000, /* HCLK = 100MHz */ + .xres = 160, + .yres = 160, + .bpp = 4, + .left_margin = 1 << (4 + 3), + .right_margin = 8 << 3, + .hsync_len = 48, + .upper_margin = 0, + .lower_margin = 0, + + .lcdcon5 = 0x00000001, +}; + +static struct s3c2410fb_mach_info __initdata amlm5900_fb_info = { + + .displays = &amlm5900_lcd_info, + .num_displays = 1, + .default_display = 0, + + .gpccon = 0xaaaaaaaa, + .gpccon_mask = 0xffffffff, + .gpccon_reg = S3C2410_GPCCON, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + .gpcup_reg = S3C2410_GPCUP, + + .gpdcon = 0xaaaaaaaa, + .gpdcon_mask = 0xffffffff, + .gpdcon_reg = S3C2410_GPDCON, + .gpdup = 0x0000ffff, + .gpdup_mask = 0xffffffff, + .gpdup_reg = S3C2410_GPDUP, +}; +#endif + +static irqreturn_t +amlm5900_wake_interrupt(int irq, void *ignored) +{ + return IRQ_HANDLED; +} + +static void amlm5900_init_pm(void) +{ + int ret = 0; + + ret = request_irq(IRQ_EINT9, &amlm5900_wake_interrupt, + IRQF_TRIGGER_RISING | IRQF_SHARED, + "amlm5900_wakeup", &amlm5900_wake_interrupt); + if (ret != 0) { + printk(KERN_ERR "AML-M5900: no wakeup irq, %d?\n", ret); + } else { + enable_irq_wake(IRQ_EINT9); + /* configure the suspend/resume status pin */ + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); + } +} +static void __init amlm5900_init(void) +{ + amlm5900_init_pm(); +#ifdef CONFIG_FB_S3C2410 + s3c24xx_fb_set_platdata(&amlm5900_fb_info); +#endif + s3c_i2c0_set_platdata(NULL); + gpiod_add_lookup_table(&amlm5900_mmc_gpio_table); + platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices)); +} + +MACHINE_START(AML_M5900, "AML_M5900") + .atag_offset = 0x100, + .map_io = amlm5900_map_io, + .init_irq = s3c2410_init_irq, + .init_machine = amlm5900_init, + .init_time = amlm5900_init_time, +MACHINE_END |