diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/Kconfig.platforms | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms new file mode 100644 index 000000000..889e78f40 --- /dev/null +++ b/arch/arm64/Kconfig.platforms @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Platform selection" + +config ARCH_ACTIONS + bool "Actions Semi Platforms" + select OWL_TIMER + select PINCTRL + help + This enables support for the Actions Semiconductor S900 SoC family. + +config ARCH_AGILEX + bool "Intel's Agilex SoCFPGA Family" + help + This enables support for Intel's Agilex SoCFPGA Family. + +config ARCH_SUNXI + bool "Allwinner sunxi 64-bit SoC Family" + select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + select RESET_CONTROLLER + help + This enables support for Allwinner sunxi based SoCs like the A64. + +config ARCH_ALPINE + bool "Annapurna Labs Alpine platform" + select ALPINE_MSI if PCI + help + This enables support for the Annapurna Labs Alpine + Soc family. + +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" + select TIMER_OF + select GPIOLIB + select MFD_CORE + select PINCTRL + select PINCTRL_BCM2835 + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + help + This enables support for the Broadcom BCM2837 and BCM2711 SoC. + These SoCs are used in the Raspberry Pi 3 and 4 devices. + +config ARCH_BCM_IPROC + bool "Broadcom iProc SoC Family" + select COMMON_CLK_IPROC + select GPIOLIB + select PINCTRL + help + This enables support for Broadcom iProc based SoCs + +config ARCH_BERLIN + bool "Marvell Berlin SoC Family" + select DW_APB_ICTL + select DW_APB_TIMER_OF + select GPIOLIB + select PINCTRL + help + This enables support for Marvell Berlin SoC Family + +config ARCH_BITMAIN + bool "Bitmain SoC Platforms" + help + This enables support for the Bitmain SoC Family. + +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select BCM7038_L1_IRQ + select BRCMSTB_L2_IRQ + select GENERIC_IRQ_CHIP + select PINCTRL + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + +config ARCH_EXYNOS + bool "ARMv8 based Samsung Exynos SoC family" + select COMMON_CLK_SAMSUNG + select EXYNOS_CHIPID + select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS + select EXYNOS_PMU + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM + select SOC_SAMSUNG + help + This enables support for ARMv8 based Samsung Exynos SoC family. + +config ARCH_SPARX5 + bool "ARMv8 based Microchip Sparx5 SoC family" + select PINCTRL + select DW_APB_TIMER_OF + help + This enables support for the Microchip Sparx5 ARMv8-based + SoC family of TSN-capable gigabit switches. + + The SparX-5 Ethernet switch family provides a rich set of + switching features such as advanced TCAM-based VLAN and QoS + processing enabling delivery of differentiated services, and + security through TCAM-based frame processing using versatile + content aware processor (VCAP). + +config ARCH_K3 + bool "Texas Instruments Inc. K3 multicore SoC architecture" + select PM_GENERIC_DOMAINS if PM + select MAILBOX + select SOC_TI + select TI_MESSAGE_MANAGER + select TI_SCI_PROTOCOL + select TI_SCI_INTR_IRQCHIP + select TI_SCI_INTA_IRQCHIP + select TI_K3_SOCINFO + help + This enables support for Texas Instruments' K3 multicore SoC + architecture. + +config ARCH_LAYERSCAPE + bool "ARMv8 based Freescale Layerscape SoC family" + select EDAC_SUPPORT + help + This enables support for the Freescale Layerscape SoC family. + +config ARCH_LG1K + bool "LG Electronics LG1K SoC Family" + help + This enables support for LG Electronics LG1K SoC Family + +config ARCH_HISI + bool "Hisilicon SoC Family" + select ARM_TIMER_SP804 + select HISILICON_IRQ_MBIGEN if PCI + select PINCTRL + help + This enables support for Hisilicon ARMv8 SoC family + +config ARCH_KEEMBAY + bool "Keem Bay SoC" + help + This enables support for Intel Movidius SoC code-named Keem Bay. + +config ARCH_MEDIATEK + bool "MediaTek SoC Family" + select ARM_GIC + select PINCTRL + select MTK_TIMER + help + This enables support for MediaTek MT27xx, MT65xx, MT76xx + & MT81xx ARMv8 SoCs + +config ARCH_MESON + bool "Amlogic Platforms" + select PINCTRL + select PINCTRL_MESON + select COMMON_CLK_GXBB + select COMMON_CLK_AXG + select COMMON_CLK_G12A + select MESON_IRQ_GPIO + help + This enables support for the arm64 based Amlogic SoCs + such as the s905, S905X/D, S912, A113X/D or S905X/D2 + +config ARCH_MVEBU + bool "Marvell EBU SoC Family" + select ARMADA_AP806_SYSCON + select ARMADA_CP110_SYSCON + select ARMADA_37XX_CLK + select GPIOLIB + select GPIOLIB_IRQCHIP + select MVEBU_GICP + select MVEBU_ICU + select MVEBU_ODMI + select MVEBU_PIC + select MVEBU_SEI + select OF_GPIO + select PINCTRL + select PINCTRL_ARMADA_37XX + select PINCTRL_ARMADA_AP806 + select PINCTRL_ARMADA_CP110 + help + This enables support for Marvell EBU familly, including: + - Armada 3700 SoC Family + - Armada 7K SoC Family + - Armada 8K SoC Family + +config ARCH_MXC + bool "ARMv8 based NXP i.MX SoC family" + select ARM64_ERRATUM_843419 + select ARM64_ERRATUM_845719 if COMPAT + select IMX_GPCV2 + select IMX_GPCV2_PM_DOMAINS + select PM + select PM_GENERIC_DOMAINS + select SOC_BUS + select TIMER_IMX_SYS_CTR + help + This enables support for the ARMv8 based SoCs in the + NXP i.MX family. + +config ARCH_QCOM + bool "Qualcomm Platforms" + select GPIOLIB + select PINCTRL + help + This enables support for the ARMv8 based Qualcomm chipsets. + +config ARCH_REALTEK + bool "Realtek Platforms" + select RESET_CONTROLLER + help + This enables support for the ARMv8 based Realtek chipsets, + like the RTD1295. + +config ARCH_RENESAS + bool "Renesas SoC Platforms" + select GPIOLIB + select PINCTRL + select SOC_BUS + help + This enables support for the ARMv8 based Renesas SoCs. + +config ARCH_ROCKCHIP + bool "Rockchip Platforms" + select ARCH_HAS_RESET_CONTROLLER + select GPIOLIB + select PINCTRL + select PINCTRL_ROCKCHIP + select PM + select ROCKCHIP_TIMER + help + This enables support for the ARMv8 based Rockchip chipsets, + like the RK3368. + +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + +config ARCH_SEATTLE + bool "AMD Seattle SoC Family" + help + This enables support for AMD Seattle SOC Family + +config ARCH_STRATIX10 + bool "Altera's Stratix 10 SoCFPGA Family" + help + This enables support for Altera's Stratix 10 SoCFPGA Family. + +config ARCH_SYNQUACER + bool "Socionext SynQuacer SoC Family" + select IRQ_FASTEOI_HIERARCHY_HANDLERS + +config ARCH_TEGRA + bool "NVIDIA Tegra SoC Family" + select ARCH_HAS_RESET_CONTROLLER + select ARM_GIC_PM + select CLKSRC_MMIO + select TIMER_OF + select GENERIC_CLOCKEVENTS + select GPIOLIB + select PINCTRL + select PM + select PM_GENERIC_DOMAINS + select RESET_CONTROLLER + help + This enables support for the NVIDIA Tegra SoC family. + +config ARCH_SPRD + bool "Spreadtrum SoC platform" + help + Support for Spreadtrum ARM based SoCs + +config ARCH_THUNDER + bool "Cavium Inc. Thunder SoC Family" + help + This enables support for Cavium's Thunder Family of SoCs. + +config ARCH_THUNDER2 + bool "Cavium ThunderX2 Server Processors" + select GPIOLIB + help + This enables support for Cavium's ThunderX2 CN99XX family of + server processors. + +config ARCH_UNIPHIER + bool "Socionext UniPhier SoC Family" + select ARCH_HAS_RESET_CONTROLLER + select PINCTRL + select RESET_CONTROLLER + help + This enables support for Socionext UniPhier SoC family. + +config ARCH_VEXPRESS + bool "ARMv8 software model (Versatile Express)" + select GPIOLIB + select PM + select PM_GENERIC_DOMAINS + help + This enables support for the ARMv8 software model (Versatile + Express). + +config ARCH_VISCONTI + bool "Toshiba Visconti SoC Family" + select PINCTRL + select PINCTRL_VISCONTI + help + This enables support for Toshiba Visconti SoCs Family. + +config ARCH_VULCAN + def_bool n + +config ARCH_XGENE + bool "AppliedMicro X-Gene SOC Family" + help + This enables support for AppliedMicro X-Gene SOC Family + +config ARCH_ZX + bool "ZTE ZX SoC Family" + select PINCTRL + help + This enables support for ZTE ZX SoC Family + +config ARCH_ZYNQMP + bool "Xilinx ZynqMP Family" + help + This enables support for Xilinx ZynqMP Family + +endmenu |