diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi | 447 |
1 files changed, 447 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi new file mode 100644 index 000000000..27e964bfa --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-aiu.h> + +/ { + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-update { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1300000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + dio2133: analog-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "AU2"; + VCC-supply = <&vcc5v>; + enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK_ACTIVITY; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + led-blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + }; + + vcc_card: regulator-vcc_card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddio_ao3v3>; + + gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc5v: regulator-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + + gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_ao3v3: regulator-vddio_ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_ao3v3>; + regulator-always-on; + }; + + vddio_card: regulator-vddio-card { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GXL-LIBRETECH-S9XX-PC"; + audio-aux-devs = <&dio2133>; + audio-widgets = "Speaker", "7J4-14 LEFT", + "Speaker", "7J4-11 RIGHT"; + audio-routing = "AU2 INL", "ACODEC LOLN", + "AU2 INR", "ACODEC LORN", + "7J4-14 LEFT", "AU2 OUTL", + "7J4-11 RIGHT", "AU2 OUTR"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + + codec-1 { + sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; + }; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; + + codec-0 { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddio_ao18>; + status = "okay"; +}; + +&aiu { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + reg = <0>; + max-speed = <1000>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the reset pin of the usb HUB is driven high to take + * it out of reset. + */ + usb1_rst_pins: usb1_rst_irq { + mux { + groups = "GPIODV_3"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + /* Make sure the phy irq pin is properly configured as input */ + eth_phy_irq_pins: eth_phy_irq { + mux { + groups = "GPIOZ_15"; + function = "gpio_periphs"; + bias-disable; + output-disable; + }; + }; +}; + +&hdmi_tx { + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc5v>; + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c_C { + pinctrl-0 = <&i2c_c_dv18_pins>; + pinctrl-names = "default"; + status = "okay"; + + rtc: rtc@51 { + reg = <0x51>; + compatible = "nxp,pcf8563"; + #clock-cells = <0>; + clock-output-names = "rtc_clkout"; + }; +}; + +&pwm_AO_ab { + pinctrl-0 = <&pwm_ao_a_3_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&saradc { + vref-supply = <&vddio_ao18>; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_card>; + + status = "okay"; +}; + +/* eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vddio_boot>; + + status = "okay"; +}; + +&spifc { + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + status = "okay"; + + gd25lq128: spi-flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <12000000>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb1_rst_pins>; + pinctrl-names = "default"; + phy-supply = <&vcc5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc5v>; +}; |