diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-db.dts | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts new file mode 100644 index 000000000..3e5789f37 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada 3720 development board + * (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is compatible with the version 1.4 and the version 2.0 of + * the board, however the CON numbers are different between the 2 + * version + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vcc_sd_reg2: regulator-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* Gigabit module on CON19(V2.0)/CON21(V1.4) */ +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy0>; + status = "okay"; +}; + +/* Gigabit module on CON18(V2.0)/CON20(V1.4) */ +ð1 { + phy-mode = "sgmii"; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + gpio_exp: pca9555@22 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0x22>; + /* + * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT + * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE + * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN + * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN + * IO0_4: PWR_EN_SD + * IO0_5: PWR_EN_EMMC + * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL + * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS + */ + }; + + rtc@68 { + /* PT7C4337A from pericom fully compatible with the ds1337 */ + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* CON3 */ +&sata { + status = "okay"; +}; + +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +/* SD slot module on CON14(V2.0)/CON15(V1.4) */ +&sdhci1 { + wp-inverted; + cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + vmmc-supply = <&vcc_sd_reg2>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "U-boot Env"; + reg = <0x200000 0x10000>; + }; + partition@210000 { + label = "Linux"; + reg = <0x210000 0xDF0000>; + }; + }; + }; +}; + +/* + * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through + * an FTDI (also on CON24(V2.0)/CON26(V1.4)). + */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* CON26(V2.0)/CON28(V1.4) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +/* CON27(V2.0)/CON29(V1.4) */ +&usb2 { + status = "okay"; +}; + +/* CON29(V2.0)/CON31(V1.4) */ +&usb3 { + status = "okay"; + usb-phy = <&usb3_phy>; +}; |