diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 483 |
1 files changed, 483 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts new file mode 100644 index 000000000..eb01cc96b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 SolidRun ltd. + * Based on Marvell MACCHIATOBin board + * + * Device Tree file for SolidRun's ClearFog GT 8K + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "SolidRun ClearFog GT 8K"; + compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp1_eth1; + ethernet1 = &cp0_eth0; + ethernet2 = &cp1_eth2; + }; + + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + maximum-power-milliwatt = <2000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led0_pins + &cp0_led1_pins>; + pinctrl-names = "default"; + /* No designated function for these LEDs at the moment */ + led0 { + label = "clearfog-gt-8k:green:led0"; + gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led1 { + label = "clearfog-gt-8k:green:led1"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + + button_1 { + /* The wps button */ + label = "WPS Button"; + gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; +}; + +&cp0_pinctrl { + /* + * MPP Bus: + * [0-31] = 0xff: Keep default CP0_shared_pins: + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32, 33, 34] pci0/1/2 reset + * [35-38] CP0 I2C1 and I2C0 + * [39] GPIO reset button + * [40,41] LED0 and LED1 + * [43] 1512 phy reset + * [47] USB VBUS EN (active low) + * [48] FAN PWM + * [49] SFP+ present signal + * [50] TPM interrupt + * [51] WLAN0 disable + * [52] WLAN1 disable + * [53] LTE disable + * [54] NFC reset + * [55] Micro SD card detect + * [56-61] Micro SD + */ + + cp0_pci0_reset_pins: pci0-reset-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_pci1_reset_pins: pci1-reset-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + cp0_pci2_reset_pins: pci2-reset-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_gpio_reset_pins: gpio-reset-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp0_led0_pins: led0-pins { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + cp0_led1_pins: led1-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + cp0_copper_eth_phy_reset: copper-eth-phy-reset { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cp0_fan_pwm_pins: fan-pwm-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cp0_sfp_present_pins: sfp-present-pins { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + cp0_tpm_irq_pins: tpm-irq-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp0_wlan_disable_pins: wlan-disable-pins { + marvell,pins = "mpp51"; + marvell,function = "gpio"; + }; + + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; + reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +&cp0_gpio2 { + sata_reset { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; + + lte_reset { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + }; + + wlan_disable { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + }; + + lte_disable { + gpio-hog; + gpios = <21 GPIO_ACTIVE_LOW>; + output-low; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SFP */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + sfp = <&sfp_cp0_eth0>; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_1 { + status = "okay"; +}; + +&cp1_pinctrl { + /* + * MPP Bus: + * [0-5] TDM + * [6] VHV Enable + * [7] CP1 SPI0 CSn1 (FXS) + * [8] CP1 SPI0 CSn0 (TPM) + * [9.11]CP1 SPI0 MOSI/MISO/CLK + * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) + * [14] CP1 SPI1 CS0n (64Mb SPI ROM) + * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) + * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) + * [24] Topaz switch reset + * [26] Buzzer + * [27] CP1 SMI MDIO + * [28] CP1 SMI MDC + * [29] CP0 10G SFP TX Disable + * [30] WPS button + * [31] Front panel button + */ + + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp1_switch_reset_pins: switch-reset-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + cp1_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp27", "mpp28"; + marvell,function = "ge"; + }; + + cp1_sfp_tx_disable_pins: sfp-tx-disable-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_wps_button_pins: wps-button-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; +}; + +&cp1_sata0 { + pinctrl-0 = <&cp0_pci1_reset_pins>; + status = "okay"; + + sata-port@1 { + phys = <&cp1_comphy0 1>; + phy-names = "cp1-sata0-1-phy"; + }; +}; + +&cp1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + /* LED0 - GB link + * LED1 - on: link, blink: activity + */ + marvell,reg-init = <3 16 0 0x1017>; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_copper_eth_phy_reset>; + reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; + + switch0: switch0@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_switch_reset_pins>; + reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp1_eth2>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* 1G copper */ +&cp1_eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ge_phy>; + phys = <&cp1_comphy3 1>; +}; + +/* Switch uplink */ +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + managed = "in-band-status"; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; |