diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell')
42 files changed, 6605 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile new file mode 100644 index 000000000..3e5f2e7a0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0 +# Mvebu SoC Family +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-emmc.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin-v7-emmc.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi new file mode 100644 index 000000000..dc1182ec9 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell Armada 371x family of SoCs + * (also named 88F3710) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3710 SoC"; + compatible = "marvell,armada3710", "marvell,armada3700"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts new file mode 100644 index 000000000..3e5789f37 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada 3720 development board + * (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is compatible with the version 1.4 and the version 2.0 of + * the board, however the CON numbers are different between the 2 + * version + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3"; + compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vcc_sd_reg2: regulator-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>; + }; +}; + +/* Gigabit module on CON19(V2.0)/CON21(V1.4) */ +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy0>; + status = "okay"; +}; + +/* Gigabit module on CON18(V2.0)/CON20(V1.4) */ +ð1 { + phy-mode = "sgmii"; + phy = <&phy1>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + gpio_exp: pca9555@22 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0x22>; + /* + * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT + * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE + * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN + * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN + * IO0_4: PWR_EN_SD + * IO0_5: PWR_EN_EMMC + * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL + * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS + */ + }; + + rtc@68 { + /* PT7C4337A from pericom fully compatible with the ds1337 */ + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */ +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* CON3 */ +&sata { + status = "okay"; +}; + +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +/* SD slot module on CON14(V2.0)/CON15(V1.4) */ +&sdhci1 { + wp-inverted; + cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + vmmc-supply = <&vcc_sd_reg2>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "U-boot Env"; + reg = <0x200000 0x10000>; + }; + partition@210000 { + label = "Linux"; + reg = <0x210000 0xDF0000>; + }; + }; + }; +}; + +/* + * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through + * an FTDI (also on CON24(V2.0)/CON26(V1.4)). + */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* CON26(V2.0)/CON28(V1.4) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +/* CON27(V2.0)/CON29(V1.4) */ +&usb2 { + status = "okay"; +}; + +/* CON29(V2.0)/CON31(V1.4) */ +&usb3 { + status = "okay"; + usb-phy = <&usb3_phy>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 000000000..ec72a11ed --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 000000000..215d2f702 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; +}; + +&switch0 { + ports { + switch0port1: port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 000000000..b6f4af8eb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; +}; + +&switch0 { + ports { + switch0port1: port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts new file mode 100644 index 000000000..1542d836c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +/dts-v1/; + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board"; + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi new file mode 100644 index 000000000..0775c16e0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + */ + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + aliases { + ethernet0 = ð0; + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; +}; + +/* J6 */ +&sata { + status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0port0: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch0port1: port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + switch0port2: port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + switch0port3: port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts new file mode 100644 index 000000000..39e9b3875 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -0,0 +1,872 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CZ.NIC Turris Mox Board + * 2019 by Marek Behun <marek.behun@nic.cz> + */ + +/dts-v1/; + +#include <dt-bindings/bus/moxtet.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "CZ.NIC Turris Mox Board"; + compatible = "cznic,turris-mox", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + spi0 = &spi0; + ethernet0 = ð0; + ethernet1 = ð1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + red { + label = "mox:red:activity"; + gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; + }; + + vsdc_reg: vsdc-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vsdio_reg: vsdio-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + sdhci1_pwrseq: sdhci1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + + /* enabled by U-Boot if SFP module is present */ + status = "disabled"; + }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm"; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + /delete-property/ mrvl,i2c-fast-mode; + status = "okay"; + + /* MCP7940MT-I/MNY RTC */ + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */ + }; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + status = "okay"; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + /* + * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property + * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and + * 2 size cells and also expects that the second range starts at 16 MB offset. Also it + * expects that first range uses same address for PCI (child) and CPU (parent) cells (so + * no remapping) and that this address is the lowest from all specified ranges. If these + * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address + * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window + * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB. + * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in + * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix): + * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7 + * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf + * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33 + * Bug related to requirement of same child and parent addresses for first range is fixed + * in U-Boot version 2022.04 by following commit: + * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17 + */ + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0xe8000000 0 0xe8000000 0 0x01000000 /* Port 0 IO */ + 0x82000000 0 0xe9000000 0 0xe9000000 0 0x07000000>; /* Port 0 MEM */ + + /* enabled by U-Boot if PCIe module is present */ + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + status = "okay"; +}; + +ð1 { + phy-mode = "2500base-x"; + managed = "in-band-status"; + phys = <&comphy0 1>; +}; + +&sdhci0 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&vsdc_reg>; + marvell,pad-type = "sd"; + status = "okay"; +}; + +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + non-removable; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vsdio_reg>; + mmc-pwrseq = <&sdhci1_pwrseq>; + /* forbid SDR104 for FCC purposes */ + sdhci-caps-mask = <0x2 0x0>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>; + assigned-clocks = <&nb_periph_clk 7>; + assigned-clock-parents = <&tbg 1>; + assigned-clock-rates = <20000000>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "secure-firmware"; + reg = <0x0 0x20000>; + }; + + partition@20000 { + label = "a53-firmware"; + reg = <0x20000 0x160000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + + partition@190000 { + label = "Rescue system"; + reg = <0x190000 0x660000>; + }; + + partition@7f0000 { + label = "dtb"; + reg = <0x7f0000 0x10000>; + }; + }; + }; + + moxtet: moxtet@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cznic,moxtet"; + reg = <1>; + reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + status = "disabled"; + }; + }; +}; + +&usb2 { + status = "okay"; +}; + +&comphy2 { + connector { + compatible = "usb-a-connector"; + phy-supply = <&exp_usb3_vbus>; + }; +}; + +&usb3 { + status = "okay"; + phys = <&comphy2 0>; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + /* switch nodes are enabled by U-Boot if modules are present */ + switch0@10 { + compatible = "marvell,mv88e6190"; + reg = <0x10 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(0)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan5"; + phy-handle = <&switch0phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan6"; + phy-handle = <&switch0phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan7"; + phy-handle = <&switch0phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan8"; + phy-handle = <&switch0phy8>; + }; + + port@9 { + reg = <0x9>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + switch0port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port9 &switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch0@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1_topaz: switch0phy1@11 { + reg = <0x11>; + }; + + switch0phy2_topaz: switch0phy2@12 { + reg = <0x12>; + }; + + switch0phy3_topaz: switch0phy3@13 { + reg = <0x13>; + }; + + switch0phy4_topaz: switch0phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð1>; + }; + }; + }; + + switch1@11 { + compatible = "marvell,mv88e6190"; + reg = <0x11 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(1)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1: switch1phy1@1 { + reg = <0x1>; + }; + + switch1phy2: switch1phy2@2 { + reg = <0x2>; + }; + + switch1phy3: switch1phy3@3 { + reg = <0x3>; + }; + + switch1phy4: switch1phy4@4 { + reg = <0x4>; + }; + + switch1phy5: switch1phy5@5 { + reg = <0x5>; + }; + + switch1phy6: switch1phy6@6 { + reg = <0x6>; + }; + + switch1phy7: switch1phy7@7 { + reg = <0x7>; + }; + + switch1phy8: switch1phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan13"; + phy-handle = <&switch1phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan14"; + phy-handle = <&switch1phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan15"; + phy-handle = <&switch1phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan16"; + phy-handle = <&switch1phy8>; + }; + + switch1port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + + switch1port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch1@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1_topaz: switch1phy1@11 { + reg = <0x11>; + }; + + switch1phy2_topaz: switch1phy2@12 { + reg = <0x12>; + }; + + switch1phy3_topaz: switch1phy3@13 { + reg = <0x13>; + }; + + switch1phy4_topaz: switch1phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + }; + }; + + switch2@12 { + compatible = "marvell,mv88e6190"; + reg = <0x12 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(2)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1: switch2phy1@1 { + reg = <0x1>; + }; + + switch2phy2: switch2phy2@2 { + reg = <0x2>; + }; + + switch2phy3: switch2phy3@3 { + reg = <0x3>; + }; + + switch2phy4: switch2phy4@4 { + reg = <0x4>; + }; + + switch2phy5: switch2phy5@5 { + reg = <0x5>; + }; + + switch2phy6: switch2phy6@6 { + reg = <0x6>; + }; + + switch2phy7: switch2phy7@7 { + reg = <0x7>; + }; + + switch2phy8: switch2phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan21"; + phy-handle = <&switch2phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan22"; + phy-handle = <&switch2phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan23"; + phy-handle = <&switch2phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan24"; + phy-handle = <&switch2phy8>; + }; + + switch2port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch2@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1_topaz: switch2phy1@11 { + reg = <0x11>; + }; + + switch2phy2_topaz: switch2phy2@12 { + reg = <0x12>; + }; + + switch2phy3_topaz: switch2phy3@13 { + reg = <0x13>; + }; + + switch2phy4_topaz: switch2phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts new file mode 100644 index 000000000..95d46e8d0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid <vladimir.vid@sartura.hr> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + model = "Methode uDPU Board"; + compatible = "methode,udpu", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + /* only bootloader is located on the SPI */ + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; + }; + }; +}; + +&pinctrl_nb { + i2c1_recovery_pins: i2c1-recovery-pins { + groups = "i2c1"; + function = "gpio"; + }; + + i2c2_recovery_pins: i2c2-recovery-pins { + groups = "i2c2"; + function = "gpio"; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-1 = <&i2c2_recovery_pins>; + /delete-property/mrvl,i2c-fast-mode; + scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + lm75@48 { + status = "okay"; + compatible = "lm75"; + reg = <0x48>; + }; + + lm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; +}; + +ð0 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy1 0>; + sfp = <&sfp_eth0>; +}; + +ð1 { + phy-mode = "sgmii"; + status = "okay"; + managed = "in-band-status"; + phys = <&comphy0 1>; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi new file mode 100644 index 000000000..5ce55bdbb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell Armada 372x family of SoCs + * (also named 88F3720) + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + */ + +#include "armada-37xx.dtsi" + +/ { + model = "Marvell Armada 3720 SoC"; + compatible = "marvell,armada3720", "marvell,armada3710"; + + cpus { + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clocks = <&nb_periph_clk 16>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi new file mode 100644 index 000000000..0f4bcd15d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -0,0 +1,520 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Marvell Armada 37xx family of SoCs. + * + * Copyright (C) 2016 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Marvell Armada 37xx SoC"; + compatible = "marvell,armada3700"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * The PSCI firmware region depicted below is the default one + * and should be updated by the bootloader. + */ + psci-area@4000000 { + reg = <0 0x4000000 0 0x200000>; + no-map; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0>; + clocks = <&nb_periph_clk 16>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + internal-regs@d0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + /* 32M internal register @ 0xd000_0000 */ + ranges = <0x0 0x0 0xd0000000 0x2000000>; + + wdt: watchdog@8300 { + compatible = "marvell,armada-3700-wdt"; + reg = <0x8300 0x40>; + marvell,system-controller = <&cpu_misc>; + clocks = <&xtalclk>; + }; + + cpu_misc: system-controller@d000 { + compatible = "marvell,armada-3700-cpu-misc", + "syscon"; + reg = <0xd000 0x1000>; + }; + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0xA00>; + clocks = <&nb_periph_clk 7>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <4>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11000 0x24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&nb_periph_clk 10>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + i2c1: i2c@11080 { + compatible = "marvell,armada-3700-i2c"; + reg = <0x11080 0x24>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&nb_periph_clk 9>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + mrvl,i2c-fast-mode; + status = "disabled"; + }; + + avs: avs@11500 { + compatible = "marvell,armada-3700-avs", + "syscon"; + reg = <0x11500 0x40>; + }; + + uart0: serial@12000 { + compatible = "marvell,armada-3700-uart"; + reg = <0x12000 0x18>; + clocks = <&xtalclk>; + interrupts = + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uart-sum", "uart-tx", "uart-rx"; + status = "disabled"; + }; + + uart1: serial@12200 { + compatible = "marvell,armada-3700-uart-ext"; + reg = <0x12200 0x30>; + clocks = <&xtalclk>; + interrupts = + <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "uart-tx", "uart-rx"; + status = "disabled"; + }; + + nb_periph_clk: nb-periph-clk@13000 { + compatible = "marvell,armada-3700-periph-clock-nb", + "syscon"; + reg = <0x13000 0x100>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; + }; + + sb_periph_clk: sb-periph-clk@18000 { + compatible = "marvell,armada-3700-periph-clock-sb"; + reg = <0x18000 0x100>; + clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, + <&tbg 3>, <&xtalclk>; + #clock-cells = <1>; + }; + + tbg: tbg@13200 { + compatible = "marvell,armada-3700-tbg-clock"; + reg = <0x13200 0x100>; + clocks = <&xtalclk>; + #clock-cells = <1>; + }; + + pinctrl_nb: pinctrl@13800 { + compatible = "marvell,armada3710-nb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x13800 0x100>, <0x13C00 0x20>; + /* MPP1[19:0] */ + gpionb: gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nb 0 0 36>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + }; + + xtalclk: xtal-clk { + compatible = "marvell,armada-3700-xtal-clock"; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; + }; + + spi_cs1_pins: spi-cs1-pins { + groups = "spi_cs1"; + function = "spi"; + }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; + + mmc_pins: mmc-pins { + groups = "emmc_nb"; + function = "emmc"; + }; + }; + + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + + comphy: phy@18300 { + compatible = "marvell,comphy-a3700"; + reg = <0x18300 0x300>, + <0x1F000 0x400>, + <0x5C000 0x400>, + <0xe0178 0x8>; + reg-names = "comphy", + "lane1_pcie_gbe", + "lane0_usb3_gbe", + "lane2_sata_usb3"; + #address-cells = <1>; + #size-cells = <0>; + + comphy0: phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + comphy1: phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + comphy2: phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + /* MPP2[23:0] */ + gpiosb: gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 30>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + }; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + + smi_pins: smi-pins { + groups = "smi"; + function = "smi"; + }; + + sdio_pins: sdio-pins { + groups = "sdio_sb"; + function = "sdio"; + }; + + pcie_reset_pins: pcie-reset-pins { + groups = "pcie1"; /* this actually controls "pcie1_reset" */ + function = "gpio"; + }; + + pcie_clkreq_pins: pcie-clkreq-pins { + groups = "pcie1_clkreq"; + function = "pcie"; + }; + }; + + eth0: ethernet@30000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x30000 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 8>; + status = "disabled"; + }; + + mdio: mdio@32004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x32004 0x4>; + }; + + eth1: ethernet@40000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x40000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 7>; + status = "disabled"; + }; + + usb3: usb@58000 { + compatible = "marvell,armada3700-xhci", + "generic-xhci"; + reg = <0x58000 0x4000>; + marvell,usb-misc-reg = <&usb32_syscon>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 12>; + phys = <&comphy0 0>, <&usb2_utmi_otg_phy>; + phy-names = "usb3-phy", "usb2-utmi-otg-phy"; + status = "disabled"; + }; + + usb2_utmi_otg_phy: phy@5d000 { + compatible = "marvell,a3700-utmi-otg-phy"; + reg = <0x5d000 0x800>; + marvell,usb-misc-reg = <&usb32_syscon>; + #phy-cells = <0>; + }; + + usb32_syscon: system-controller@5d800 { + compatible = "marvell,armada-3700-usb2-host-device-misc", + "syscon"; + reg = <0x5d800 0x800>; + }; + + usb2: usb@5e000 { + compatible = "marvell,armada-3700-ehci"; + reg = <0x5e000 0x1000>; + marvell,usb-misc-reg = <&usb2_syscon>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_utmi_host_phy>; + phy-names = "usb2-utmi-host-phy"; + status = "disabled"; + }; + + usb2_utmi_host_phy: phy@5f000 { + compatible = "marvell,a3700-utmi-host-phy"; + reg = <0x5f000 0x800>; + marvell,usb-misc-reg = <&usb2_syscon>; + #phy-cells = <0>; + }; + + usb2_syscon: system-controller@5f800 { + compatible = "marvell,armada-3700-usb2-host-misc", + "syscon"; + reg = <0x5f800 0x800>; + }; + + xor@60900 { + compatible = "marvell,armada-3700-xor"; + reg = <0x60900 0x100>, + <0x60b00 0x100>; + + xor10 { + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + xor11 { + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + crypto: crypto@90000 { + compatible = "inside-secure,safexcel-eip97ies"; + reg = <0x90000 0x20000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clocks = <&nb_periph_clk 15>; + }; + + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + + sdhci1: sdhci@d0000 { + compatible = "marvell,armada-3700-sdhci", + "marvell,sdhci-xenon"; + reg = <0xd0000 0x300>, + <0x1e808 0x4>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; + status = "disabled"; + }; + + sdhci0: sdhci@d8000 { + compatible = "marvell,armada-3700-sdhci", + "marvell,sdhci-xenon"; + reg = <0xd8000 0x300>, + <0x17808 0x4>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 0>; + clock-names = "core"; + status = "disabled"; + }; + + sata: sata@e0000 { + compatible = "marvell,armada-3700-ahci"; + reg = <0xe0000 0x178>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&nb_periph_clk 1>; + status = "disabled"; + }; + + gic: interrupt-controller@1d00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x1d00000 0x10000>, /* GICD */ + <0x1d40000 0x40000>, /* GICR */ + <0x1d80000 0x2000>, /* GICC */ + <0x1d90000 0x2000>, /* GICH */ + <0x1da0000 0x20000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pcie0: pcie@d0070000 { + compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + status = "disabled"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + msi-parent = <&pcie0>; + msi-controller; + /* + * The 128 MiB address range [0xe8000000-0xf0000000] is + * dedicated for PCIe and can be assigned to 8 windows + * with size a power of two. Use one 64 KiB window for + * IO at the end and the remaining seven windows + * (totaling 127 MiB) for MEM. + */ + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x07f00000 /* Port 0 MEM */ + 0x81000000 0 0x00000000 0 0xefff0000 0 0x00010000>; /* Port 0 IO */ + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + max-link-speed = <2>; + phys = <&comphy1 0>; + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + firmware { + armada-3700-rwtm { + compatible = "marvell,armada-3700-rwtm-firmware"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi new file mode 100644 index 000000000..4e46326dd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and + * one CP110. + */ + +#include "armada-ap806-dual.dtsi" +#include "armada-70x0.dtsi" + +/ { + model = "Marvell Armada 7020"; + compatible = "marvell,armada7020", "marvell,armada-ap806-dual", + "marvell,armada-ap806"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts new file mode 100644 index 000000000..a7eb4e769 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -0,0 +1,302 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada 7040 Development board platform + */ + +#include <dt-bindings/gpio/gpio.h> +#include "armada-7040.dtsi" + +/ { + model = "Marvell Armada 7040 DB board"; + compatible = "marvell,armada7040-db", "marvell,armada7040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + }; + + cp0_exp_usb3_0_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-0-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 4 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_exp_usb3_1_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-1-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_0_current_regulator>; + }; + + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_1_current_regulator>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + + +&cp0_pcie2 { + status = "okay"; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; +}; + +&cp0_i2c0 { + status = "okay"; + clock-frequency = <100000>; + + expander0: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + /* + * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect + * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit + * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN + * IO0_3: USB2_DEVICE_DETECT + * IO0_4: GPIO_0 IO1_4: SD_Status + * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable + * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC + * IO0_7: IO1_7: SDIO_Vcntrl + */ + }; +}; + +&cp0_nand_controller { + /* + * SPI on CPM and NAND have common pins on this board. We can + * use only one at a time. To enable the NAND (which will + * disable the SPI), the "status = "okay";" line have to be + * added here. + */ + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + + }; + }; +}; + +&cp0_spi1 { + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_sata0 { + status = "okay"; + + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; +}; + +&cp0_usb3_0 { + phys = <&cp0_comphy1 0>; + phy-names = "cp0-usb3h0-comphy"; + status = "okay"; +}; + +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; + status = "okay"; +}; + +&ap_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; + +&cp0_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + /* Network PHY */ + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy2 0>; + + fixed-link { + speed = <10000>; + full-duplex; + }; +}; + +&cp0_eth1 { + status = "okay"; + /* Network PHY */ + phy = <&phy0>; + phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 1>; +}; + +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi new file mode 100644 index 000000000..2f440711d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and + * one CP110. + */ + +#include "armada-ap806-quad.dtsi" +#include "armada-70x0.dtsi" + +/ { + model = "Marvell Armada 7040"; + compatible = "marvell,armada7040", "marvell,armada-ap806-quad", + "marvell,armada-ap806"; +}; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi new file mode 100644 index 000000000..293403a1a --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * Device Tree file for the Armada 70x0 SoC + */ + +/ { + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; +}; + +/* + * Instantiate the CP110 + */ +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp110.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,armada-7k-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi new file mode 100644 index 000000000..ba1307c0f --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and + * two CP110. + */ + +#include "armada-ap806-dual.dtsi" +#include "armada-80x0.dtsi" + +/ { + model = "Marvell Armada 8020"; + compatible = "marvell,armada8020", "marvell,armada-ap806-dual", + "marvell,armada-ap806"; +}; + +/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock + * in CP master is not connected (by package) to the oscillator. So + * disable it. However, the RTC clock in CP slave is connected to the + * oscillator so this one is let enabled. + */ + +&cp0_rtc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts new file mode 100644 index 000000000..eb01cc96b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -0,0 +1,483 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 SolidRun ltd. + * Based on Marvell MACCHIATOBin board + * + * Device Tree file for SolidRun's ClearFog GT 8K + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "SolidRun ClearFog GT 8K"; + compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp1_eth1; + ethernet1 = &cp0_eth0; + ethernet2 = &cp1_eth2; + }; + + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + sfp_cp0_eth0: sfp-cp0-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_i2c1>; + mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + maximum-power-milliwatt = <2000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&cp0_led0_pins + &cp0_led1_pins>; + pinctrl-names = "default"; + /* No designated function for these LEDs at the moment */ + led0 { + label = "clearfog-gt-8k:green:led0"; + gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + led1 { + label = "clearfog-gt-8k:green:led1"; + gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>; + pinctrl-names = "default"; + + button_0 { + /* The rear button */ + label = "Rear Button"; + gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <BTN_0>; + }; + + button_1 { + /* The wps button */ + label = "WPS Button"; + gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>; + linux,can-disable; + linux,code = <KEY_WPS_BUTTON>; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; +}; + +&cp0_pinctrl { + /* + * MPP Bus: + * [0-31] = 0xff: Keep default CP0_shared_pins: + * [11] CLKOUT_MPP_11 (out) + * [23] LINK_RD_IN_CP2CP (in) + * [25] CLKOUT_MPP_25 (out) + * [29] AVS_FB_IN_CP2CP (in) + * [32, 33, 34] pci0/1/2 reset + * [35-38] CP0 I2C1 and I2C0 + * [39] GPIO reset button + * [40,41] LED0 and LED1 + * [43] 1512 phy reset + * [47] USB VBUS EN (active low) + * [48] FAN PWM + * [49] SFP+ present signal + * [50] TPM interrupt + * [51] WLAN0 disable + * [52] WLAN1 disable + * [53] LTE disable + * [54] NFC reset + * [55] Micro SD card detect + * [56-61] Micro SD + */ + + cp0_pci0_reset_pins: pci0-reset-pins { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + cp0_pci1_reset_pins: pci1-reset-pins { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + cp0_pci2_reset_pins: pci2-reset-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + + cp0_gpio_reset_pins: gpio-reset-pins { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + cp0_led0_pins: led0-pins { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + cp0_led1_pins: led1-pins { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + cp0_copper_eth_phy_reset: copper-eth-phy-reset { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cp0_fan_pwm_pins: fan-pwm-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cp0_sfp_present_pins: sfp-present-pins { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + + cp0_tpm_irq_pins: tpm-irq-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; + + cp0_wlan_disable_pins: wlan-disable-pins { + marvell,pins = "mpp51"; + marvell,function = "gpio"; + }; + + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; + reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +&cp0_gpio2 { + sata_reset { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; + + lte_reset { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + }; + + wlan_disable { + gpio-hog; + gpios = <19 GPIO_ACTIVE_LOW>; + output-low; + }; + + lte_disable { + gpio-hog; + gpios = <21 GPIO_ACTIVE_LOW>; + output-low; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SFP */ +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + phys = <&cp0_comphy2 0>; + sfp = <&sfp_cp0_eth0>; +}; + +&cp0_sdhci0 { + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_1 { + status = "okay"; +}; + +&cp1_pinctrl { + /* + * MPP Bus: + * [0-5] TDM + * [6] VHV Enable + * [7] CP1 SPI0 CSn1 (FXS) + * [8] CP1 SPI0 CSn0 (TPM) + * [9.11]CP1 SPI0 MOSI/MISO/CLK + * [13] CP1 SPI1 MISO (TDM and SPI ROM shared) + * [14] CP1 SPI1 CS0n (64Mb SPI ROM) + * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared) + * [16] CP1 SPI1 CLK (TDM and SPI ROM shared) + * [24] Topaz switch reset + * [26] Buzzer + * [27] CP1 SMI MDIO + * [28] CP1 SMI MDC + * [29] CP0 10G SFP TX Disable + * [30] WPS button + * [31] Front panel button + */ + + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + + cp1_switch_reset_pins: switch-reset-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + cp1_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp27", "mpp28"; + marvell,function = "ge"; + }; + + cp1_sfp_tx_disable_pins: sfp-tx-disable-pins { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + cp1_wps_button_pins: wps-button-pins { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; +}; + +&cp1_sata0 { + pinctrl-0 = <&cp0_pci1_reset_pins>; + status = "okay"; + + sata-port@1 { + phys = <&cp1_comphy0 1>; + phy-names = "cp1-sata0-1-phy"; + }; +}; + +&cp1_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + /* LED0 - GB link + * LED1 - on: link, blink: activity + */ + marvell,reg-init = <3 16 0 0x1017>; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_copper_eth_phy_reset>; + reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; + + switch0: switch0@4 { + compatible = "marvell,mv88e6085"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_switch_reset_pins>; + reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan4"; + phy-handle = <&switch0phy2>; + }; + + port@4 { + reg = <4>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&cp1_eth2>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + + switch0phy3: switch0phy3@14 { + reg = <0x14>; + }; + }; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* 1G copper */ +&cp1_eth1 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&ge_phy>; + phys = <&cp1_comphy3 1>; +}; + +/* Switch uplink */ +&cp1_eth2 { + status = "okay"; + phy-mode = "2500base-x"; + phys = <&cp1_comphy5 2>; + managed = "in-band-status"; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts new file mode 100644 index 000000000..09fb5256f --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada 8040 Development board platform + */ + +#include <dt-bindings/gpio/gpio.h> +#include "armada-8040.dtsi" + +/ { + model = "Marvell Armada 8040 DB board"; + compatible = "marvell,armada8040-db", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth2; + ethernet2 = &cp1_eth0; + ethernet3 = &cp1_eth1; + i2c1 = &cp0_i2c0; + i2c2 = &cp1_i2c0; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "cp0-usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { + compatible = "regulator-fixed"; + regulator-name = "cp0-usb3h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy: cp0-usb3-0-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_0_vbus>; + }; + + cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "cp1-usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander1 0 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy: cp1-usb3-0-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_0_vbus>; + }; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; + }; + }; + }; +}; + +/* Accessible over the mini-USB CON9 connector on the main board */ +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +/* CON6 on CP0 expansion */ +&cp0_pcie0 { + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; + status = "okay"; +}; + +/* CON5 on CP0 expansion */ +&cp0_pcie2 { + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + clock-frequency = <100000>; + + /* U31 */ + expander0: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + /* U25 */ + expander1: pca9555@25 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x25>; + }; + +}; + +/* CON4 on CP0 expansion */ +&cp0_sata0 { + status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy1 0>; + phy-names = "cp0-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +/* CON9 on CP0 expansion */ +&cp0_usb3_0 { + usb-phy = <&cp0_usb3_0_phy>; + status = "okay"; +}; + +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + +/* CON10 on CP0 expansion */ +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; + status = "okay"; +}; + +&cp0_mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; +}; + +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +/* CON6 on CP1 expansion */ +&cp1_pcie0 { + phys = <&cp1_comphy0 0>; + phy-names = "cp1-pcie0-x1-phy"; + status = "okay"; +}; + +/* CON7 on CP1 expansion */ +&cp1_pcie1 { + phys = <&cp1_comphy4 1>; + phy-names = "cp1-pcie1-x1-phy"; + status = "okay"; +}; + +/* CON5 on CP1 expansion */ +&cp1_pcie2 { + phys = <&cp1_comphy5 2>; + phy-names = "cp1-pcie2-x1-phy"; + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&cp1_spi1 { + status = "okay"; + + spi-flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Boot"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "Filesystem"; + reg = <0x200000 0xd00000>; + }; + partition@f00000 { + label = "Boot_2nd"; + reg = <0xf00000 0x100000>; + }; + }; + }; +}; + +/* + * Proper NAND usage will require DPR-76 to be in position 1-2, which disables + * MDIO signal of CP1. + */ +&cp1_nand_controller { + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* CON4 on CP1 expansion */ +&cp1_sata0 { + status = "okay"; + + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; +}; + +/* CON9 on CP1 expansion */ +&cp1_usb3_0 { + usb-phy = <&cp1_usb3_0_phy>; + status = "okay"; +}; + +/* CON10 on CP1 expansion */ +&cp1_usb3_1 { + status = "okay"; +}; + +&cp1_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; +}; + +&cp1_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&ap_sdhci0 { + status = "okay"; + bus-width = <4>; + non-removable; +}; + +&cp0_sdhci0 { + status = "okay"; + bus-width = <8>; + non-removable; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts new file mode 100644 index 000000000..2e6832d02 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040-mcbin.dtsi" + +/ { + model = "Marvell 8040 MACCHIATOBin Single-shot"; + compatible = "marvell,armada8040-mcbin-singleshot", + "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; +}; + +&cp0_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +&cp1_eth0 { + status = "okay"; + phy-mode = "10gbase-r"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts new file mode 100644 index 000000000..1766cf581 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040-mcbin.dtsi" + +/ { + model = "Marvell 8040 MACCHIATOBin Double-shot"; + compatible = "marvell,armada8040-mcbin-doubleshot", + "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; +}; + +&cp0_xmdio { + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + sfp = <&sfp_eth0>; + }; + + phy8: ethernet-phy@8 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + sfp = <&sfp_eth1>; + }; +}; + +&cp0_eth0 { + status = "okay"; + /* Network PHY */ + phy = <&phy0>; + phy-mode = "10gbase-r"; +}; + +&cp1_eth0 { + status = "okay"; + /* Network PHY */ + phy = <&phy8>; + phy-mode = "10gbase-r"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi new file mode 100644 index 000000000..cbcb210cb --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for MACCHIATOBin Armada 8040 community board platform + */ + +#include "armada-8040.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell 8040 MACCHIATOBin"; + compatible = "marvell,armada8040-mcbin", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp1_eth0; + ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; + }; + + /* Regulator labels correspond with schematics */ + v_3_3: regulator-3-3v { + compatible = "regulator-fixed"; + regulator-name = "v_3_3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + status = "okay"; + }; + + v_vddo_h: regulator-1-8v { + compatible = "regulator-fixed"; + regulator-name = "v_vddo_h"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + status = "okay"; + }; + + v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_xhci_vbus_pins>; + regulator-name = "v_5v0_usb3_hst_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + maximum-power-milliwatt = <2000>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + maximum-power-milliwatt = <2000>; + }; + + sfp_eth3: sfp-eth3 { + /* CON13,14 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + maximum-power-milliwatt = <2000>; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&ap_sdhci0 { + bus-width = <8>; + /* + * Not stable in HS modes - phy needs "more calibration", so add + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. + */ + marvell,xenon-phy-slow-mode; + no-1-8-v; + no-sd; + no-sdio; + non-removable; + status = "okay"; + vqmmc-supply = <&v_vddo_h>; +}; + +&cp0_i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + status = "okay"; +}; + +&cp0_i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c1_pins>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + + sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + sfpp1_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + sfp_1g_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + }; +}; + +/* J25 UART header */ +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + +&cp0_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + status = "okay"; + + ge_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&cp0_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_pcie_pins>; + num-lanes = <4>; + num-viewport = <8>; + reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, + <&cp0_comphy2 0>, <&cp0_comphy3 0>; + phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", + "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy"; + status = "okay"; +}; + +&cp0_pinctrl { + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp32", "mpp34"; + marvell,function = "ge"; + }; + cp0_i2c1_pins: i2c1-pins { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_i2c0_pins: i2c0-pins { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; + cp0_xhci_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; + cp0_pcie_pins: pcie-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: sdhci-pins { + marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59", + "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* CPM Lane 5 - U29 */ + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_sdhci0 { + /* U6 */ + broken-cd; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins>; + status = "okay"; + vqmmc-supply = <&v_3_3>; +}; + +&cp0_usb3_0 { + /* J38? - USB2.0 only */ + status = "okay"; +}; + +&cp0_usb3_1 { + /* J38? - USB2.0 only */ + status = "okay"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +&cp1_eth0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; +}; + +&cp1_eth1 { + /* CPS Lane 0 - J5 (Gigabit RJ45) */ + status = "okay"; + /* Network PHY */ + phy = <&ge_phy>; + phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 1>; +}; + +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + +&cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_spi1_pins: spi1-pins { + marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_uart0_pins: uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; +}; + +/* J27 UART header */ +&cp1_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_uart0_pins>; + status = "okay"; +}; + +&cp1_sata0 { + status = "okay"; + + /* CPS Lane 1 - U32 */ + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + + /* CPS Lane 3 - U31 */ + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; +}; + +&cp1_spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi1_pins>; + status = "okay"; + + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + +&cp1_usb3_0 { + /* CPS Lane 2 - CON7 */ + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi new file mode 100644 index 000000000..22c2d6ebf --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and + * two CP110. + */ + +#include "armada-ap806-quad.dtsi" +#include "armada-80x0.dtsi" + +/ { + model = "Marvell Armada 8040"; + compatible = "marvell,armada8040", "marvell,armada-ap806-quad", + "marvell,armada-ap806"; +}; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock + * in CP master is not connected (by package) to the oscillator. So + * disable it. However, the RTC clock in CP slave is connected to the + * oscillator so this one is let enabled. + */ +&cp0_rtc { + status = "disabled"; +}; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; + +&cp1_sata0 { + iommus = <&smmu 0x454>; +}; + +&cp1_usb3_0 { + iommus = <&smmu 0x450>; +}; + +&cp1_usb3_1 { + iommus = <&smmu 0x451>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts new file mode 100644 index 000000000..4ba158f41 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada-8080 Development board platform + */ + +#include "armada-8080.dtsi" + +/ { + model = "Marvell 8080 board"; + compatible = "marvell,armada-8080-db", "marvell,armada-8080", + "marvell,armada-ap810-octa", "marvell,armada-ap810"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart0_ap0 { + clock-frequency = <384000>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi new file mode 100644 index 000000000..299e814d1 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA. + */ + +#include "armada-ap810-ap0-octa-core.dtsi" + +/ { + model = "Marvell 8080 board"; + compatible = "marvell,armada-8080", "marvell,armada-ap810-octa", + "marvell,armada-ap810"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi new file mode 100644 index 000000000..ee67c70bf --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * Device Tree file for the Armada 80x0 SoC family + */ + +/ { + aliases { + gpio1 = &cp1_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + spi3 = &cp1_spi0; + spi4 = &cp1_spi1; + }; +}; + +/* + * Instantiate the master CP110 + */ +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp110.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +/* + * Instantiate the slave CP110 + */ +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp110.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +/* The 80x0 has two CP blocks, but uses only one block from each. */ +&cp1_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,armada-8k-cpm-pinctrl"; + }; +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,armada-8k-cps-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp6", "mpp7", + "mpp8", "mpp9", "mpp10", "mpp11", + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + + nand_rb: nand-rb { + marvell,pins = "mpp13", "mpp12"; + marvell,function = "nf"; + }; + }; +}; + +&cp1_crypto { + /* + * The cryptographic engine found on the cp110 + * master is enabled by default at the SoC + * level. Because it is not possible as of now + * to enable two cryptographic engines in + * parallel, disable this one by default. + */ + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi new file mode 100644 index 000000000..fcab5173f --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP806. + */ + +#include "armada-ap806.dtsi" + +/ { + model = "Marvell Armada AP806 Dual"; + compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; + + thermal-zones { + /delete-node/ ap-thermal-cpu2; + /delete-node/ ap-thermal-cpu3; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi new file mode 100644 index 000000000..3db427122 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP806. + */ + +#include "armada-ap806.dtsi" + +/ { + model = "Marvell Armada AP806 Quad"; + compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi new file mode 100644 index 000000000..866628679 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP806. + */ + +#define AP_NAME ap806 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP806"; + compatible = "marvell,armada-ap806"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi new file mode 100644 index 000000000..68782f161 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 Quad + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#include "armada-ap807.dtsi" + +/ { + model = "Marvell Armada AP807 Quad"; + compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi new file mode 100644 index 000000000..623010f3c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#define AP_NAME ap807 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP807"; + compatible = "marvell,armada-ap807"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap807-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu { + compatible = "marvell,ap807-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi new file mode 100644 index 000000000..12e477f1a --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP80x. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + gpio0 = &ap_gpio; + spi0 = &spi0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + + AP_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + smmu: iommu@5000000 { + compatible = "marvell,ap806-smmu-500", "arm,mmu-500"; + reg = <0x100000 0x100000>; + dma-coherent; + #iommu-cells = <1>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + + }; + + watchdog: watchdog@610000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core"; + clocks = <&ap_clk 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + + ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; + + ap_gpio: gpio@1040 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 20>; + }; + }; + + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&ap_thermal 0>; + + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + + ap_thermal_cpu0: ap-thermal-cpu0 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi new file mode 100644 index 000000000..d1a7143ef --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP810 OCTA cores. + */ + +#include "armada-ap810-ap0.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,armada-ap810-octa"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x000>; + enable-method = "psci"; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x001>; + enable-method = "psci"; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + }; + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + enable-method = "psci"; + }; + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + enable-method = "psci"; + }; + cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + enable-method = "psci"; + }; + cpu7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + enable-method = "psci"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi new file mode 100644 index 000000000..8107d120a --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2017 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP810. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/dts-v1/; + +/ { + model = "Marvell Armada AP810"; + compatible = "marvell,armada-ap810"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0_ap0; + serial1 = &uart1_ap0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + ap810-ap0 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@e8000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xe8000000 0x4000000>; + interrupt-parent = <&gic>; + + gic: interrupt-controller@3000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + ranges; + + reg = <0x3000000 0x10000>, /* GICD */ + <0x3060000 0x100000>, /* GICR */ + <0x00c0000 0x2000>, /* GICC */ + <0x00d0000 0x1000>, /* GICH */ + <0x00e0000 0x2000>; /* GICV */ + + gic_its_ap0: interrupt-controller@3040000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x3040000 0x20000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_its_ap0 0xa0>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_its_ap0 0xa1>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_its_ap0 0xa2>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_its_ap0 0xa3>; + dma-coherent; + }; + + uart0_ap0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + status = "disabled"; + }; + + uart1_ap0: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi new file mode 100644 index 000000000..c04c6c475 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + */ + +/* Common definitions used by Armada 7K/8K DTs */ +#define PASTER(x, y) x ## y +#define EVALUATOR(x, y) PASTER(x, y) +#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) +#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) +#define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi new file mode 100644 index 000000000..4fd33b0fa --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP110. + */ + +#define CP11X_TYPE cp110 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi new file mode 100644 index 000000000..1d0a9653e --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP115. + */ + +#define CP11X_TYPE cp115 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi new file mode 100644 index 000000000..9dcf16bea --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP11x. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> + +#include "armada-common.dtsi" + +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP11X_NAME: CP11X_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&CP11X_LABEL(thermal) 0>; + + trips { + CP11X_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + }; +}; + +&CP11X_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP11X_LABEL(icu_nsr)>; + ranges; + + config-space@CP11X_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; + + CP11X_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, + <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP11X_LABEL(eth0): eth0 { + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP11X_LABEL(eth1): eth1 { + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP11X_LABEL(eth2): eth2 { + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP11X_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + CP11X_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP11X_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + clocks = <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP11X_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; + }; + + CP11X_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP11X_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP11X_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP11X_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + + CP11X_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + CP11X_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + interrupts-extended = + <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; + + CP11X_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 22>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 23>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + dma-coherent; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP11X_LABEL(clk) 1 15>, + <&CP11X_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; + }; + + CP11X_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 8>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 7>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(nand_controller): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 2>, + <&CP11X_LABEL(clk) 1 17>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + }; + + CP11X_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 25>, + <&CP11X_LABEL(clk) 1 17>; + status = "okay"; + }; + + CP11X_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP11X_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 26>, + <&CP11X_LABEL(clk) 1 17>; + dma-coherent; + }; + }; + + CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts new file mode 100644 index 000000000..d24294888 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada CN9130-DB"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi new file mode 100644 index 000000000..327b04134 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130 SoC. + */ + +#include "armada-ap807-quad.dtsi" + +/ { + model = "Marvell Armada CN9130 SoC"; + compatible = "marvell,cn9130", "marvell,armada-ap807-quad", + "marvell,armada-ap807"; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; +}; + +/* + * Instantiate the internal CP115 + */ + +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ + 0xe0000000 + ((iface - 1) * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts new file mode 100644 index 000000000..3c975f98b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dts" + +/ { + model = "Marvell Armada CN9131-DB"; + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000..4ef0df309 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; |