diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 240 |
1 files changed, 240 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi new file mode 100644 index 000000000..791f254ac --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include "msm8994.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0xcf 0x20001>; + qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + qcom,board-id = <8 0>; + + /* Kitakami firmware doesn't support PSCI */ + /delete-node/ psci; + + gpio_keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + label = "Volume Down"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + button@1 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + button@2 { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + button@3 { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* This is for getting crash logs using Android downstream kernels */ + ramoops@1fe00000 { + compatible = "ramoops"; + reg = <0x0 0x1fe00000 0x0 0x200000>; + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + + continuous_splash: framebuffer@3401000{ + reg = <0x0 0x3401000 0x0 0x2200000>; + no-map; + }; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0x0 0x3400000 0x0 0x1000>; + no-map; + }; + + peripheral_region: peripheral_region@7400000 { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; + }; + + modem_region: modem_region@9000000 { + reg = <0x0 0x9000000 0x0 0x5a00000>; + no-map; + }; + + tzapp: modem_region@ea00000 { + reg = <0x0 0xea00000 0x0 0x1900000>; + no-map; + }; + + fb_region: fb_region@40000000 { + reg = <0x00 0x40000000 0x00 0x1000000>; + no-map; + }; + }; +}; + +&blsp_spi0 { + status = "okay"; + + /* FPC fingerprint reader */ +}; + +/* I2C1 is disabled on this board */ + +&blsp_i2c2 { + status = "okay"; + + /* NXP NFC */ +}; + +&blsp_i2c4 { + status = "okay"; + + /* Empty but active */ +}; + +&blsp_i2c5 { + status = "okay"; + + /* SMB1357 charger and sii8620 HDMI/MHL bridge */ +}; + +&blsp_i2c6 { + status = "okay"; + + /* Synaptics touchscreen */ +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + pmi8994_s1: s1 {}; + pmi8994_s2: s2 {}; + pmi8994_s3: s3 {}; + pmi8994_bby: boost-bypass {}; + }; +}; + +&sdhc1 { + /* There is an issue with the eMMC causing permanent + * damage to the card if a quirk isn't addressed. + * Until it's fixed, disable the MMC so as not to brick + * devices. + */ + status = "disabled"; + + /* Downstream pushes 2.95V to the sdhci device, + * but upstream driver REALLY wants to make vmmc 1.8v + * cause of the hs400-1_8v mode. MMC works fine without + * that regulator, so let's not use it for now. + * vqmmc is also disabled cause driver stll complains. + * + * vmmc-supply = <&pm8994_l20>; + * vqmmc-supply = <&pm8994_s4>; + */ +}; |