summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts520
1 files changed, 520 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
new file mode 100644
index 000000000..2e4bb7ecd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Draak board
+ *
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+/dts-v1/;
+#include "r8a77995.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Renesas Draak board based on r8a77995";
+ compatible = "renesas,draak", "renesas,r8a77995";
+
+ aliases {
+ serial0 = &scif2;
+ ethernet0 = &avb;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000>;
+
+ brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
+ default-brightness-level = <10>;
+
+ power-supply = <&reg_12p0v>;
+ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ stdout-path = "serial0:115200n8";
+ };
+
+ composite-in {
+ compatible = "composite-video-connector";
+
+ port {
+ composite_con_in: endpoint {
+ remote-endpoint = <&adv7180_in>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&reg_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x18000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_12p0v: regulator-12p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "D12.0V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ /*
+ * TX clock internal delay mode is required for reliable
+ * 1Gbps communication using the KSZ9031RNX phy present on
+ * the Draak board, however, TX clock internal delay mode
+ * isn't supported on r8a77995. Thus, limit speed to
+ * 100Mbps for reliable communication.
+ */
+ max-speed = <100>;
+ };
+};
+
+&can0 {
+ pinctrl-0 = <&can0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x12_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
+&ehci0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
+};
+
+&hsusb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ composite-in@20 {
+ compatible = "adi,adv7180cp";
+ reg = <0x20>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7180_in: endpoint {
+ remote-endpoint = <&composite_con_in>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ /*
+ * The VIN4 video input path is shared between
+ * CVBS and HDMI inputs through SW[49-53]
+ * switches.
+ *
+ * CVBS is the default selection, link it to
+ * VIN4 here.
+ */
+ adv7180_out: endpoint {
+ remote-endpoint = <&vin4_in>;
+ };
+ };
+ };
+
+ };
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
+ reg-names = "main", "edid", "cec", "packet";
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ hdmi-decoder@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ default-input = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ adv7612_in: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ /*
+ * The VIN4 video input path is shared between
+ * CVBS and HDMI inputs through SW[49-53]
+ * switches.
+ *
+ * CVBS is the default selection, leave HDMI
+ * not connected here.
+ */
+ adv7612_out: endpoint {
+ pclk-sample = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ /*
+ * Even though the LVDS1 output is not connected, the encoder must be
+ * enabled to supply a pixel clock to the DU for the DPAD output when
+ * LVDS0 is in use.
+ */
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
+&ohci0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&pfc {
+ avb0_pins: avb {
+ groups = "avb0_link", "avb0_mdio", "avb0_mii";
+ function = "avb0";
+ };
+
+ can0_pins: can0 {
+ groups = "can0_data_a";
+ function = "can0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data_a";
+ function = "can1";
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0_c";
+ function = "pwm0";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_c";
+ function = "pwm1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data";
+ function = "scif2";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ vin4_pins_cvbs: vin4 {
+ groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ function = "vin4";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&sdhi2 {
+ /* used for on-board eMMC */
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ renesas,no-otg-pins;
+ status = "okay";
+};
+
+&vin4 {
+ pinctrl-0 = <&vin4_pins_cvbs>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ ports {
+ port {
+ vin4_in: endpoint {
+ remote-endpoint = <&adv7180_out>;
+ };
+ };
+ };
+};