1 files changed, 351 insertions, 0 deletions
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
new file mode 100644
index 000000000..505bdd75b
--- /dev/null
+++ b/arch/arm64/include/asm/memory.h
@@ -0,0 +1,351 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Based on arch/arm/include/asm/memory.h
+ *
+ * Copyright (C) 2000-2002 Russell King
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_MEMORY_H
+#define __ASM_MEMORY_H
+
+#include <linux/const.h>
+#include <linux/sizes.h>
+#include <asm/page-def.h>
+
+/*
+ * Size of the PCI I/O space. This must remain a power of two so that
+ * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses.
+ */
+#define PCI_IO_SIZE		SZ_16M
+
+/*
+ * VMEMMAP_SIZE - allows the whole linear region to be covered by
+ *                a struct page array
+ *
+ * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE
+ * needs to cover the memory region from the beginning of the 52-bit
+ * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to
+ * keep a constant PAGE_OFFSET and "fallback" to using the higher end
+ * of the VMEMMAP where 52-bit support is not available in hardware.
+ */
+#define VMEMMAP_SIZE ((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) \
+			>> (PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT))
+
+/*
+ * PAGE_OFFSET - the virtual address of the start of the linear map, at the
+ *               start of the TTBR1 address space.
+ * PAGE_END - the end of the linear map, where all other kernel mappings begin.
+ * KIMAGE_VADDR - the virtual address of the start of the kernel image.
+ * VA_BITS - the maximum number of bits for virtual addresses.
+ */
+#define VA_BITS			(CONFIG_ARM64_VA_BITS)
+#define _PAGE_OFFSET(va)	(-(UL(1) << (va)))
+#define PAGE_OFFSET		(_PAGE_OFFSET(VA_BITS))
+#define KIMAGE_VADDR		(MODULES_END)
+#define BPF_JIT_REGION_START	(KASAN_SHADOW_END)
+#define BPF_JIT_REGION_SIZE	(SZ_128M)
+#define BPF_JIT_REGION_END	(BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE)
+#define MODULES_END		(MODULES_VADDR + MODULES_VSIZE)
+#define MODULES_VADDR		(BPF_JIT_REGION_END)
+#define MODULES_VSIZE		(SZ_128M)
+#define VMEMMAP_START		(-VMEMMAP_SIZE - SZ_2M)
+#define VMEMMAP_END		(VMEMMAP_START + VMEMMAP_SIZE)
+#define PCI_IO_END		(VMEMMAP_START - SZ_2M)
+#define PCI_IO_START		(PCI_IO_END - PCI_IO_SIZE)
+#define FIXADDR_TOP		(PCI_IO_START - SZ_2M)
+
+#if VA_BITS > 48
+#define VA_BITS_MIN		(48)
+#else
+#define VA_BITS_MIN		(VA_BITS)
+#endif
+
+#define _PAGE_END(va)		(-(UL(1) << ((va) - 1)))
+
+#define KERNEL_START		_text
+#define KERNEL_END		_end
+
+/*
+ * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual
+ * address space for the shadow region respectively. They can bloat the stack
+ * significantly, so double the (minimum) stack size when they are in use.
+ */
+#ifdef CONFIG_KASAN
+#define KASAN_SHADOW_OFFSET	_AC(CONFIG_KASAN_SHADOW_OFFSET, UL)
+#define KASAN_SHADOW_END	((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \
+					+ KASAN_SHADOW_OFFSET)
+#define KASAN_THREAD_SHIFT	1
+#else
+#define KASAN_THREAD_SHIFT	0
+#define KASAN_SHADOW_END	(_PAGE_END(VA_BITS_MIN))
+#endif /* CONFIG_KASAN */
+
+#define MIN_THREAD_SHIFT	(14 + KASAN_THREAD_SHIFT)
+
+/*
+ * VMAP'd stacks are allocated at page granularity, so we must ensure that such
+ * stacks are a multiple of page size.
+ */
+#if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
+#define THREAD_SHIFT		PAGE_SHIFT
+#else
+#define THREAD_SHIFT		MIN_THREAD_SHIFT
+#endif
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+#endif
+
+#define THREAD_SIZE		(UL(1) << THREAD_SHIFT)
+
+/*
+ * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
+ * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
+ * assembly.
+ */
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN		(2 * THREAD_SIZE)
+#else
+#define THREAD_ALIGN		THREAD_SIZE
+#endif
+
+#define IRQ_STACK_SIZE		THREAD_SIZE
+
+#define OVERFLOW_STACK_SIZE	SZ_4K
+
+/*
+ * Alignment of kernel segments (e.g. .text, .data).
+ *
+ *  4 KB granule:  16 level 3 entries, with contiguous bit
+ * 16 KB granule:   4 level 3 entries, without contiguous bit
+ * 64 KB granule:   1 level 3 entry
+ */
+#define SEGMENT_ALIGN		SZ_64K
+
+/*
+ * Memory types available.
+ *
+ * IMPORTANT: MT_NORMAL must be index 0 since vm_get_page_prot() may 'or' in
+ *	      the MT_NORMAL_TAGGED memory type for PROT_MTE mappings. Note
+ *	      that protection_map[] only contains MT_NORMAL attributes.
+ */
+#define MT_NORMAL		0
+#define MT_NORMAL_TAGGED	1
+#define MT_NORMAL_NC		2
+#define MT_NORMAL_WT		3
+#define MT_DEVICE_nGnRnE	4
+#define MT_DEVICE_nGnRE		5
+#define MT_DEVICE_GRE		6
+
+/*
+ * Memory types for Stage-2 translation
+ */
+#define MT_S2_NORMAL		0xf
+#define MT_S2_DEVICE_nGnRE	0x1
+
+/*
+ * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001
+ * Stage-2 enforces Normal-WB and Device-nGnRE
+ */
+#define MT_S2_FWB_NORMAL	6
+#define MT_S2_FWB_DEVICE_nGnRE	1
+
+#ifdef CONFIG_ARM64_4K_PAGES
+#define IOREMAP_MAX_ORDER	(PUD_SHIFT)
+#else
+#define IOREMAP_MAX_ORDER	(PMD_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/mmdebug.h>
+#include <linux/types.h>
+#include <asm/bug.h>
+
+extern u64			vabits_actual;
+#define PAGE_END		(_PAGE_END(vabits_actual))
+
+extern s64			memstart_addr;
+/* PHYS_OFFSET - the physical address of the start of memory. */
+#define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
+
+/* the virtual base of the kernel image */
+extern u64			kimage_vaddr;
+
+/* the offset between the kernel virtual and physical mappings */
+extern u64			kimage_voffset;
+
+static inline unsigned long kaslr_offset(void)
+{
+	return kimage_vaddr - KIMAGE_VADDR;
+}
+
+/*
+ * Allow all memory at the discovery stage. We will clip it later.
+ */
+#define MIN_MEMBLOCK_ADDR	0
+#define MAX_MEMBLOCK_ADDR	U64_MAX
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * When dealing with data aborts, watchpoints, or instruction traps we may end
+ * up with a tagged userland pointer. Clear the tag to get a sane pointer to
+ * pass on to access_ok(), for instance.
+ */
+#define __untagged_addr(addr)	\
+	((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
+
+#define untagged_addr(addr)	({					\
+	u64 __addr = (__force u64)(addr);					\
+	__addr &= __untagged_addr(__addr);				\
+	(__force __typeof__(addr))__addr;				\
+})
+
+#ifdef CONFIG_KASAN_SW_TAGS
+#define __tag_shifted(tag)	((u64)(tag) << 56)
+#define __tag_reset(addr)	__untagged_addr(addr)
+#define __tag_get(addr)		(__u8)((u64)(addr) >> 56)
+#else
+#define __tag_shifted(tag)	0UL
+#define __tag_reset(addr)	(addr)
+#define __tag_get(addr)		0
+#endif /* CONFIG_KASAN_SW_TAGS */
+
+static inline const void *__tag_set(const void *addr, u8 tag)
+{
+	u64 __addr = (u64)addr & ~__tag_shifted(0xff);
+	return (const void *)(__addr | __tag_shifted(tag));
+}
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+
+/*
+ * Check whether an arbitrary address is within the linear map, which
+ * lives in the [PAGE_OFFSET, PAGE_END) interval at the bottom of the
+ * kernel's TTBR1 address range.
+ */
+#define __is_lm_address(addr)	(((u64)(addr) ^ PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET))
+
+#define __lm_to_phys(addr)	(((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
+#define __kimg_to_phys(addr)	((addr) - kimage_voffset)
+
+#define __virt_to_phys_nodebug(x) ({					\
+	phys_addr_t __x = (phys_addr_t)(__tag_reset(x));		\
+	__is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x);	\
+})
+
+#define __pa_symbol_nodebug(x)	__kimg_to_phys((phys_addr_t)(x))
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+extern phys_addr_t __virt_to_phys(unsigned long x);
+extern phys_addr_t __phys_addr_symbol(unsigned long x);
+#else
+#define __virt_to_phys(x)	__virt_to_phys_nodebug(x)
+#define __phys_addr_symbol(x)	__pa_symbol_nodebug(x)
+#endif /* CONFIG_DEBUG_VIRTUAL */
+
+#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
+#define __phys_to_kimg(x)	((unsigned long)((x) + kimage_voffset))
+
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
+/*
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+#define virt_to_phys virt_to_phys
+static inline phys_addr_t virt_to_phys(const volatile void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+#define phys_to_virt phys_to_virt
+static inline void *phys_to_virt(phys_addr_t x)
+{
+	return (void *)(__phys_to_virt(x));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __pa_symbol(x)		__phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
+#define __pa_nodebug(x)		__virt_to_phys_nodebug((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_to_pfn(x)		__phys_to_pfn(__virt_to_phys((unsigned long)(x)))
+#define sym_to_pfn(x)		__phys_to_pfn(__pa_symbol(x))
+
+/*
+ *  virt_to_page(x)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(x)	indicates whether a virtual address is valid
+ */
+#define ARCH_PFN_OFFSET		((unsigned long)PHYS_PFN_OFFSET)
+
+#if !defined(CONFIG_SPARSEMEM_VMEMMAP) || defined(CONFIG_DEBUG_VIRTUAL)
+#define page_to_virt(x)	({						\
+	__typeof__(x) __page = x;					\
+	void *__addr = __va(page_to_phys(__page));			\
+	(void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
+})
+#define virt_to_page(x)		pfn_to_page(virt_to_pfn(x))
+#else
+#define page_to_virt(x)	({						\
+	__typeof__(x) __page = x;					\
+	u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\
+	u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE);			\
+	(void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\
+})
+
+#define virt_to_page(x)	({						\
+	u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE;	\
+	u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page));	\
+	(struct page *)__addr;						\
+})
+#endif /* !CONFIG_SPARSEMEM_VMEMMAP || CONFIG_DEBUG_VIRTUAL */
+
+#define virt_addr_valid(addr)	({					\
+	__typeof__(addr) __addr = __tag_reset(addr);			\
+	__is_lm_address(__addr) && pfn_valid(virt_to_pfn(__addr));	\
+})
+
+void dump_mem_limit(void);
+#endif /* !ASSEMBLY */
+
+/*
+ * Given that the GIC architecture permits ITS implementations that can only be
+ * configured with a LPI table address once, GICv3 systems with many CPUs may
+ * end up reserving a lot of different regions after a kexec for their LPI
+ * tables (one per CPU), as we are forced to reuse the same memory after kexec
+ * (and thus reserve it persistently with EFI beforehand)
+ */
+#if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS)
+# define INIT_MEMBLOCK_RESERVED_REGIONS	(INIT_MEMBLOCK_REGIONS + NR_CPUS + 1)
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif /* __ASM_MEMORY_H */