diff options
Diffstat (limited to '')
-rw-r--r-- | arch/arm64/lib/strcmp.S | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S new file mode 100644 index 000000000..4e7956672 --- /dev/null +++ b/arch/arm64/lib/strcmp.S @@ -0,0 +1,223 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 ARM Ltd. + * Copyright (C) 2013 Linaro. + * + * This code is based on glibc cortex strings work originally authored by Linaro + * be found @ + * + * http://bazaar.launchpad.net/~linaro-toolchain-dev/cortex-strings/trunk/ + * files/head:/src/aarch64/ + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * compare two strings + * + * Parameters: + * x0 - const string 1 pointer + * x1 - const string 2 pointer + * Returns: + * x0 - an integer less than, equal to, or greater than zero + * if s1 is found, respectively, to be less than, to match, + * or be greater than s2. + */ + +#define REP8_01 0x0101010101010101 +#define REP8_7f 0x7f7f7f7f7f7f7f7f +#define REP8_80 0x8080808080808080 + +/* Parameters and result. */ +src1 .req x0 +src2 .req x1 +result .req x0 + +/* Internal variables. */ +data1 .req x2 +data1w .req w2 +data2 .req x3 +data2w .req w3 +has_nul .req x4 +diff .req x5 +syndrome .req x6 +tmp1 .req x7 +tmp2 .req x8 +tmp3 .req x9 +zeroones .req x10 +pos .req x11 + +SYM_FUNC_START_WEAK_PI(strcmp) + eor tmp1, src1, src2 + mov zeroones, #REP8_01 + tst tmp1, #7 + b.ne .Lmisaligned8 + ands tmp1, src1, #7 + b.ne .Lmutual_align + + /* + * NUL detection works on the principle that (X - 1) & (~X) & 0x80 + * (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and + * can be done in parallel across the entire word. + */ +.Lloop_aligned: + ldr data1, [src1], #8 + ldr data2, [src2], #8 +.Lstart_realigned: + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + eor diff, data1, data2 /* Non-zero if differences found. */ + bic has_nul, tmp1, tmp2 /* Non-zero if NUL terminator. */ + orr syndrome, diff, has_nul + cbz syndrome, .Lloop_aligned + b .Lcal_cmpresult + +.Lmutual_align: + /* + * Sources are mutually aligned, but are not currently at an + * alignment boundary. Round down the addresses and then mask off + * the bytes that preceed the start point. + */ + bic src1, src1, #7 + bic src2, src2, #7 + lsl tmp1, tmp1, #3 /* Bytes beyond alignment -> bits. */ + ldr data1, [src1], #8 + neg tmp1, tmp1 /* Bits to alignment -64. */ + ldr data2, [src2], #8 + mov tmp2, #~0 + /* Big-endian. Early bytes are at MSB. */ +CPU_BE( lsl tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ + /* Little-endian. Early bytes are at LSB. */ +CPU_LE( lsr tmp2, tmp2, tmp1 ) /* Shift (tmp1 & 63). */ + + orr data1, data1, tmp2 + orr data2, data2, tmp2 + b .Lstart_realigned + +.Lmisaligned8: + /* + * Get the align offset length to compare per byte first. + * After this process, one string's address will be aligned. + */ + and tmp1, src1, #7 + neg tmp1, tmp1 + add tmp1, tmp1, #8 + and tmp2, src2, #7 + neg tmp2, tmp2 + add tmp2, tmp2, #8 + subs tmp3, tmp1, tmp2 + csel pos, tmp1, tmp2, hi /*Choose the maximum. */ +.Ltinycmp: + ldrb data1w, [src1], #1 + ldrb data2w, [src2], #1 + subs pos, pos, #1 + ccmp data1w, #1, #0, ne /* NZCV = 0b0000. */ + ccmp data1w, data2w, #0, cs /* NZCV = 0b0000. */ + b.eq .Ltinycmp + cbnz pos, 1f /*find the null or unequal...*/ + cmp data1w, #1 + ccmp data1w, data2w, #0, cs + b.eq .Lstart_align /*the last bytes are equal....*/ +1: + sub result, data1, data2 + ret + +.Lstart_align: + ands xzr, src1, #7 + b.eq .Lrecal_offset + /*process more leading bytes to make str1 aligned...*/ + add src1, src1, tmp3 + add src2, src2, tmp3 + /*load 8 bytes from aligned str1 and non-aligned str2..*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bic has_nul, tmp1, tmp2 + eor diff, data1, data2 /* Non-zero if differences found. */ + orr syndrome, diff, has_nul + cbnz syndrome, .Lcal_cmpresult + /*How far is the current str2 from the alignment boundary...*/ + and tmp3, tmp3, #7 +.Lrecal_offset: + neg pos, tmp3 +.Lloopcmp_proc: + /* + * Divide the eight bytes into two parts. First,backwards the src2 + * to an alignment boundary,load eight bytes from the SRC2 alignment + * boundary,then compare with the relative bytes from SRC1. + * If all 8 bytes are equal,then start the second part's comparison. + * Otherwise finish the comparison. + * This special handle can garantee all the accesses are in the + * thread/task space in avoid to overrange access. + */ + ldr data1, [src1,pos] + ldr data2, [src2,pos] + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bic has_nul, tmp1, tmp2 + eor diff, data1, data2 /* Non-zero if differences found. */ + orr syndrome, diff, has_nul + cbnz syndrome, .Lcal_cmpresult + + /*The second part process*/ + ldr data1, [src1], #8 + ldr data2, [src2], #8 + sub tmp1, data1, zeroones + orr tmp2, data1, #REP8_7f + bic has_nul, tmp1, tmp2 + eor diff, data1, data2 /* Non-zero if differences found. */ + orr syndrome, diff, has_nul + cbz syndrome, .Lloopcmp_proc + +.Lcal_cmpresult: + /* + * reversed the byte-order as big-endian,then CLZ can find the most + * significant zero bits. + */ +CPU_LE( rev syndrome, syndrome ) +CPU_LE( rev data1, data1 ) +CPU_LE( rev data2, data2 ) + + /* + * For big-endian we cannot use the trick with the syndrome value + * as carry-propagation can corrupt the upper bits if the trailing + * bytes in the string contain 0x01. + * However, if there is no NUL byte in the dword, we can generate + * the result directly. We cannot just subtract the bytes as the + * MSB might be significant. + */ +CPU_BE( cbnz has_nul, 1f ) +CPU_BE( cmp data1, data2 ) +CPU_BE( cset result, ne ) +CPU_BE( cneg result, result, lo ) +CPU_BE( ret ) +CPU_BE( 1: ) + /*Re-compute the NUL-byte detection, using a byte-reversed value. */ +CPU_BE( rev tmp3, data1 ) +CPU_BE( sub tmp1, tmp3, zeroones ) +CPU_BE( orr tmp2, tmp3, #REP8_7f ) +CPU_BE( bic has_nul, tmp1, tmp2 ) +CPU_BE( rev has_nul, has_nul ) +CPU_BE( orr syndrome, diff, has_nul ) + + clz pos, syndrome + /* + * The MS-non-zero bit of the syndrome marks either the first bit + * that is different, or the top bit of the first zero byte. + * Shifting left now will bring the critical information into the + * top bits. + */ + lsl data1, data1, pos + lsl data2, data2, pos + /* + * But we need to zero-extend (char is unsigned) the value and then + * perform a signed 32-bit subtraction. + */ + lsr data1, data1, #56 + sub result, data1, data2, lsr #56 + ret +SYM_FUNC_END_PI(strcmp) +EXPORT_SYMBOL_NOKASAN(strcmp) |