1 files changed, 124 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/stmark2.c b/arch/m68k/coldfire/stmark2.c
new file mode 100644
index 000000000..8b5af9c83
--- /dev/null
+++ b/arch/m68k/coldfire/stmark2.c
@@ -0,0 +1,124 @@
+/*
+ * stmark2.c -- Support for Sysam AMCORE open board
+ *
+ * (C) Copyright 2017, Angelo Dureghello <angelo@sysam.it>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-fsl-dspi.h>
+#include <linux/spi/flash.h>
+#include <linux/dma-mapping.h>
+#include <asm/mcfsim.h>
+
+/*
+ * Partitioning of parallel NOR flash (39VF3201B)
+ */
+static struct mtd_partition stmark2_partitions[] = {
+	{
+		.name = "U-Boot (1024K)",
+		.size = 0x100000,
+		.offset = 0x0
+	}, {
+		.name = "Kernel+initramfs (7168K)",
+		.size = 0x700000,
+		.offset = MTDPART_OFS_APPEND
+	}, {
+		.name = "Flash Free Space (8192K)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND
+	}
+};
+
+static struct flash_platform_data stmark2_spi_flash_data = {
+	.name = "is25lp128",
+	.parts = stmark2_partitions,
+	.nr_parts = ARRAY_SIZE(stmark2_partitions),
+	.type = "is25lp128",
+};
+
+static struct spi_board_info stmark2_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 5000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &stmark2_spi_flash_data,
+		.mode = SPI_MODE_3,
+	}
+};
+
+/* SPI controller data, SPI (0) */
+static struct fsl_dspi_platform_data dspi_spi0_info = {
+	.cs_num = 4,
+	.bus_num = 0,
+	.sck_cs_delay = 100,
+	.cs_sck_delay = 100,
+};
+
+static struct resource dspi_spi0_resource[] = {
+	[0] = {
+		.start = MCFDSPI_BASE0,
+		.end   = MCFDSPI_BASE0 + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = 12,
+		.end   = 13,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = MCF_IRQ_DSPI0,
+		.end   = MCF_IRQ_DSPI0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 stmark2_dspi_mask = DMA_BIT_MASK(32);
+
+/* SPI controller, id = bus number */
+static struct platform_device dspi_spi0_device = {
+	.name = "fsl-dspi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dspi_spi0_resource),
+	.resource = dspi_spi0_resource,
+	.dev = {
+		.platform_data = &dspi_spi0_info,
+		.dma_mask = &stmark2_dspi_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct platform_device *stmark2_devices[] __initdata = {
+	&dspi_spi0_device,
+};
+
+/*
+ * Note: proper pin-mux setup is mandatory for proper SPI functionality.
+ */
+static int __init init_stmark2(void)
+{
+	/* DSPI0, all pins as DSPI, and using CS1 */
+	__raw_writeb(0x80, MCFGPIO_PAR_DSPIOWL);
+	__raw_writeb(0xfc, MCFGPIO_PAR_DSPIOWH);
+
+	/* Board gpio setup */
+	__raw_writeb(0x00, MCFGPIO_PAR_BE);
+	__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
+	__raw_writeb(0x00, MCFGPIO_PAR_CS);
+	__raw_writeb(0x00, MCFGPIO_PAR_CANI2C);
+
+	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
+
+	spi_register_board_info(stmark2_board_info,
+				ARRAY_SIZE(stmark2_board_info));
+
+	return 0;
+}
+
+late_initcall(init_stmark2);