1 files changed, 458 insertions, 0 deletions

diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
new file mode 100644
index 000000000..b8f3397c5
--- /dev/null
+++ b/arch/mips/alchemy/common/platform.c
@@ -0,0 +1,458 @@
+/*
+ * Platform device support for Au1x00 SoCs.
+ *
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#include <prom.h>
+
+static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
+			    unsigned int old_state)
+{
+#ifdef CONFIG_SERIAL_8250
+	switch (state) {
+	case 0:
+		alchemy_uart_enable(CPHYSADDR(port->membase));
+		serial8250_do_pm(port, state, old_state);
+		break;
+	case 3:		/* power off */
+		serial8250_do_pm(port, state, old_state);
+		alchemy_uart_disable(CPHYSADDR(port->membase));
+		break;
+	default:
+		serial8250_do_pm(port, state, old_state);
+		break;
+	}
+#endif
+}
+
+#define PORT(_base, _irq)					\
+	{							\
+		.mapbase	= _base,			\
+		.irq		= _irq,				\
+		.regshift	= 2,				\
+		.iotype		= UPIO_AU,			\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP | \
+				  UPF_FIXED_TYPE,		\
+		.type		= PORT_16550A,			\
+		.pm		= alchemy_8250_pm,		\
+	}
+
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+		PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+		PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+	},
+	[ALCHEMY_CPU_AU1200] = {
+		PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+		PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+	},
+	[ALCHEMY_CPU_AU1300] = {
+		PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT),
+		PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT),
+		PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT),
+		PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT),
+	},
+};
+
+static struct platform_device au1xx0_uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_AU1X00,
+};
+
+static void __init alchemy_setup_uarts(int ctype)
+{
+	long uartclk;
+	int s = sizeof(struct plat_serial8250_port);
+	int c = alchemy_get_uarts(ctype);
+	struct plat_serial8250_port *ports;
+	struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK);
+
+	if (IS_ERR(clk))
+		return;
+	if (clk_prepare_enable(clk)) {
+		clk_put(clk);
+		return;
+	}
+	uartclk = clk_get_rate(clk);
+	clk_put(clk);
+
+	ports = kcalloc(s, (c + 1), GFP_KERNEL);
+	if (!ports) {
+		printk(KERN_INFO "Alchemy: no memory for UART data\n");
+		return;
+	}
+	memcpy(ports, au1x00_uart_data[ctype], s * c);
+	au1xx0_uart_device.dev.platform_data = ports;
+
+	/* Fill up uartclk. */
+	for (s = 0; s < c; s++)
+		ports[s].uartclk = uartclk;
+	if (platform_device_register(&au1xx0_uart_device))
+		printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
+
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
+
+/* Power on callback for the ehci platform driver */
+static int alchemy_ehci_power_on(struct platform_device *pdev)
+{
+	return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
+}
+
+/* Power off/suspend callback for the ehci platform driver */
+static void alchemy_ehci_power_off(struct platform_device *pdev)
+{
+	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
+}
+
+static struct usb_ehci_pdata alchemy_ehci_pdata = {
+	.no_io_watchdog = 1,
+	.power_on	= alchemy_ehci_power_on,
+	.power_off	= alchemy_ehci_power_off,
+	.power_suspend	= alchemy_ehci_power_off,
+};
+
+/* Power on callback for the ohci platform driver */
+static int alchemy_ohci_power_on(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	return alchemy_usb_control(unit, 1);
+}
+
+/* Power off/suspend callback for the ohci platform driver */
+static void alchemy_ohci_power_off(struct platform_device *pdev)
+{
+	int unit;
+
+	unit = (pdev->id == 1) ?
+		ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
+
+	alchemy_usb_control(unit, 0);
+}
+
+static struct usb_ohci_pdata alchemy_ohci_pdata = {
+	.power_on		= alchemy_ohci_power_on,
+	.power_off		= alchemy_ohci_power_off,
+	.power_suspend		= alchemy_ohci_power_off,
+};
+
+static unsigned long alchemy_ohci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT },
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static unsigned long alchemy_ehci_data[][2] __initdata = {
+	[ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT },
+	[ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT },
+};
+
+static int __init _new_usbres(struct resource **r, struct platform_device **d)
+{
+	*r = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
+	if (!*r)
+		return -ENOMEM;
+	*d = kzalloc(sizeof(struct platform_device), GFP_KERNEL);
+	if (!*d) {
+		kfree(*r);
+		return -ENOMEM;
+	}
+
+	(*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	(*d)->num_resources = 2;
+	(*d)->resource = *r;
+
+	return 0;
+}
+
+static void __init alchemy_setup_usb(int ctype)
+{
+	struct resource *res;
+	struct platform_device *pdev;
+
+	/* setup OHCI0.  Every variant has one */
+	if (_new_usbres(&res, &pdev))
+		return;
+
+	res[0].start = alchemy_ohci_data[ctype][0];
+	res[0].end = res[0].start + 0x100 - 1;
+	res[0].flags = IORESOURCE_MEM;
+	res[1].start = alchemy_ohci_data[ctype][1];
+	res[1].end = res[1].start;
+	res[1].flags = IORESOURCE_IRQ;
+	pdev->name = "ohci-platform";
+	pdev->id = 0;
+	pdev->dev.dma_mask = &alchemy_all_dmamask;
+	pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+	if (platform_device_register(pdev))
+		printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
+
+
+	/* setup EHCI0: Au1200/Au1300 */
+	if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = alchemy_ehci_data[ctype][0];
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = alchemy_ehci_data[ctype][1];
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "ehci-platform";
+		pdev->id = 0;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
+		pdev->dev.platform_data = &alchemy_ehci_pdata;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
+	}
+
+	/* Au1300: OHCI1 */
+	if (ctype == ALCHEMY_CPU_AU1300) {
+		if (_new_usbres(&res, &pdev))
+			return;
+
+		res[0].start = AU1300_USB_OHCI1_PHYS_ADDR;
+		res[0].end = res[0].start + 0x100 - 1;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = AU1300_USB_INT;
+		res[1].end = res[1].start;
+		res[1].flags = IORESOURCE_IRQ;
+		pdev->name = "ohci-platform";
+		pdev->id = 1;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
+		pdev->dev.platform_data = &alchemy_ohci_pdata;
+
+		if (platform_device_register(pdev))
+			printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
+	}
+}
+
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES_COUNT	4	/* MAC regs, MAC en, MAC INT, MACDMA regs */
+#define MAC_RES(_base, _enable, _irq, _macdma)		\
+	{						\
+		.start	= _base,			\
+		.end	= _base + 0xffff,		\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _enable,			\
+		.end	= _enable + 0x3,		\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _irq,				\
+		.end	= _irq,				\
+		.flags	= IORESOURCE_IRQ		\
+	},						\
+	{						\
+		.start	= _macdma,			\
+		.end	= _macdma + 0x1ff,		\
+		.flags	= IORESOURCE_MEM,		\
+	}
+
+static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1000_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC0_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR,
+			AU1500_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1100] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1100_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC0_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR,
+			AU1550_MAC0_DMA_INT,
+			AU1000_MACDMA0_PHYS_ADDR)
+	},
+};
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+	.name		= "au1000-eth",
+	.id		= 0,
+	.num_resources	= MAC_RES_COUNT,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth0_platform_data,
+	},
+};
+
+static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
+	[ALCHEMY_CPU_AU1000] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1000_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1500] = {
+		MAC_RES(AU1500_MAC1_PHYS_ADDR,
+			AU1500_MACEN_PHYS_ADDR + 4,
+			AU1500_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+	[ALCHEMY_CPU_AU1550] = {
+		MAC_RES(AU1000_MAC1_PHYS_ADDR,
+			AU1000_MACEN_PHYS_ADDR + 4,
+			AU1550_MAC1_DMA_INT,
+			AU1000_MACDMA1_PHYS_ADDR)
+	},
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+	.name		= "au1000-eth",
+	.id		= 1,
+	.num_resources	= MAC_RES_COUNT,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth1_platform_data,
+	},
+};
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+			struct au1000_eth_platform_data *eth_data)
+{
+	if (!eth_data || port > 1)
+		return;
+
+	if (port == 0)
+		memcpy(&au1xxx_eth0_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+	else
+		memcpy(&au1xxx_eth1_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+}
+
+static void __init alchemy_setup_macs(int ctype)
+{
+	int ret, i;
+	unsigned char ethaddr[6];
+	struct resource *macres;
+
+	/* Handle 1st MAC */
+	if (alchemy_get_macs(ctype) < 1)
+		return;
+
+	macres = kmemdup(au1xxx_eth0_resources[ctype],
+			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
+		return;
+	}
+	au1xxx_eth0_device.resource = macres;
+
+	i = prom_get_ethernet_addr(ethaddr);
+	if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+		memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
+	ret = platform_device_register(&au1xxx_eth0_device);
+	if (ret)
+		printk(KERN_INFO "Alchemy: failed to register MAC0\n");
+
+
+	/* Handle 2nd MAC */
+	if (alchemy_get_macs(ctype) < 2)
+		return;
+
+	macres = kmemdup(au1xxx_eth1_resources[ctype],
+			 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
+	if (!macres) {
+		printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
+		return;
+	}
+	au1xxx_eth1_device.resource = macres;
+
+	ethaddr[5] += 1;	/* next addr for 2nd MAC */
+	if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+		memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
+	/* Register second MAC if enabled in pinfunc */
+	if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) {
+		ret = platform_device_register(&au1xxx_eth1_device);
+		if (ret)
+			printk(KERN_INFO "Alchemy: failed to register MAC1\n");
+	}
+}
+
+static int __init au1xxx_platform_init(void)
+{
+	int ctype = alchemy_get_cputype();
+
+	alchemy_setup_uarts(ctype);
+	alchemy_setup_macs(ctype);
+	alchemy_setup_usb(ctype);
+
+	return 0;
+}
+
+arch_initcall(au1xxx_platform_init);