summaryrefslogtreecommitdiffstats
path: root/arch/mips/boot
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/boot')
-rw-r--r--arch/mips/boot/.gitignore8
-rw-r--r--arch/mips/boot/Makefile173
-rw-r--r--arch/mips/boot/compressed/.gitignore3
-rw-r--r--arch/mips/boot/compressed/Makefile155
-rw-r--r--arch/mips/boot/compressed/calc_vmlinuz_load_addr.c54
-rw-r--r--arch/mips/boot/compressed/dbg.c37
-rw-r--r--arch/mips/boot/compressed/decompress.c132
-rw-r--r--arch/mips/boot/compressed/dummy.c4
-rw-r--r--arch/mips/boot/compressed/head.S56
-rw-r--r--arch/mips/boot/compressed/ld.script57
-rw-r--r--arch/mips/boot/compressed/string.c46
-rw-r--r--arch/mips/boot/compressed/uart-16550.c64
-rw-r--r--arch/mips/boot/compressed/uart-alchemy.c7
-rw-r--r--arch/mips/boot/compressed/uart-prom.c7
-rw-r--r--arch/mips/boot/dts/Makefile19
-rw-r--r--arch/mips/boot/dts/brcm/Makefile37
-rw-r--r--arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts23
-rw-r--r--arch/mips/boot/dts/brcm/bcm3368.dtsi110
-rw-r--r--arch/mips/boot/dts/brcm/bcm3384_viper.dtsi109
-rw-r--r--arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi127
-rw-r--r--arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts109
-rw-r--r--arch/mips/boot/dts/brcm/bcm63268.dtsi149
-rw-r--r--arch/mips/boot/dts/brcm/bcm6328.dtsi138
-rw-r--r--arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts48
-rw-r--r--arch/mips/boot/dts/brcm/bcm6358.dtsi139
-rw-r--r--arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts23
-rw-r--r--arch/mips/boot/dts/brcm/bcm6362.dtsi149
-rw-r--r--arch/mips/boot/dts/brcm/bcm6368.dtsi132
-rw-r--r--arch/mips/boot/dts/brcm/bcm7125.dtsi281
-rw-r--r--arch/mips/boot/dts/brcm/bcm7346.dtsi549
-rw-r--r--arch/mips/boot/dts/brcm/bcm7358.dtsi383
-rw-r--r--arch/mips/boot/dts/brcm/bcm7360.dtsi468
-rw-r--r--arch/mips/boot/dts/brcm/bcm7362.dtsi464
-rw-r--r--arch/mips/boot/dts/brcm/bcm7420.dtsi342
-rw-r--r--arch/mips/boot/dts/brcm/bcm7425.dtsi587
-rw-r--r--arch/mips/boot/dts/brcm/bcm7435.dtsi602
-rw-r--r--arch/mips/boot/dts/brcm/bcm93384wvg.dts26
-rw-r--r--arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts26
-rw-r--r--arch/mips/boot/dts/brcm/bcm96368mvwg.dts32
-rw-r--r--arch/mips/boot/dts/brcm/bcm97125cbmb.dts68
-rw-r--r--arch/mips/boot/dts/brcm/bcm97346dbsmb.dts124
-rw-r--r--arch/mips/boot/dts/brcm/bcm97358svmb.dts116
-rw-r--r--arch/mips/boot/dts/brcm/bcm97360svmb.dts119
-rw-r--r--arch/mips/boot/dts/brcm/bcm97362svmb.dts88
-rw-r--r--arch/mips/boot/dts/brcm/bcm97420c.dts90
-rw-r--r--arch/mips/boot/dts/brcm/bcm97425svmb.dts154
-rw-r--r--arch/mips/boot/dts/brcm/bcm97435svmb.dts130
-rw-r--r--arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi26
-rw-r--r--arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi26
-rw-r--r--arch/mips/boot/dts/brcm/bcm9ejtagprb.dts23
-rw-r--r--arch/mips/boot/dts/cavium-octeon/Makefile4
-rw-r--r--arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts48
-rw-r--r--arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi55
-rw-r--r--arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts37
-rw-r--r--arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts406
-rw-r--r--arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi232
-rw-r--r--arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts626
-rw-r--r--arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts62
-rw-r--r--arch/mips/boot/dts/img/Makefile5
-rw-r--r--arch/mips/boot/dts/img/boston.dts237
-rw-r--r--arch/mips/boot/dts/img/pistachio.dtsi920
-rw-r--r--arch/mips/boot/dts/img/pistachio_marduk.dts160
-rw-r--r--arch/mips/boot/dts/ingenic/Makefile9
-rw-r--r--arch/mips/boot/dts/ingenic/ci20.dts495
-rw-r--r--arch/mips/boot/dts/ingenic/cu1000-neo.dts168
-rw-r--r--arch/mips/boot/dts/ingenic/cu1830-neo.dts168
-rw-r--r--arch/mips/boot/dts/ingenic/gcw0.dts547
-rw-r--r--arch/mips/boot/dts/ingenic/gcw0_proto.dts13
-rw-r--r--arch/mips/boot/dts/ingenic/jz4725b.dtsi378
-rw-r--r--arch/mips/boot/dts/ingenic/jz4740.dtsi334
-rw-r--r--arch/mips/boot/dts/ingenic/jz4770.dtsi471
-rw-r--r--arch/mips/boot/dts/ingenic/jz4780.dtsi497
-rw-r--r--arch/mips/boot/dts/ingenic/qi_lb60.dts363
-rw-r--r--arch/mips/boot/dts/ingenic/rs90.dts315
-rw-r--r--arch/mips/boot/dts/ingenic/x1000.dtsi326
-rw-r--r--arch/mips/boot/dts/ingenic/x1830.dtsi314
-rw-r--r--arch/mips/boot/dts/lantiq/Makefile4
-rw-r--r--arch/mips/boot/dts/lantiq/danube.dtsi106
-rw-r--r--arch/mips/boot/dts/lantiq/easy50712.dts115
-rw-r--r--arch/mips/boot/dts/loongson/Makefile8
-rw-r--r--arch/mips/boot/dts/loongson/loongson64c-package.dtsi64
-rw-r--r--arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts37
-rw-r--r--arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts25
-rw-r--r--arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts25
-rw-r--r--arch/mips/boot/dts/loongson/loongson64g-package.dtsi61
-rw-r--r--arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts41
-rw-r--r--arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts102
-rw-r--r--arch/mips/boot/dts/loongson/ls7a-pch.dtsi417
-rw-r--r--arch/mips/boot/dts/loongson/rs780e-pch.dtsi43
-rw-r--r--arch/mips/boot/dts/mscc/Makefile4
-rw-r--r--arch/mips/boot/dts/mscc/ocelot.dtsi267
-rw-r--r--arch/mips/boot/dts/mscc/ocelot_pcb120.dts117
-rw-r--r--arch/mips/boot/dts/mscc/ocelot_pcb123.dts63
-rw-r--r--arch/mips/boot/dts/mti/Makefile5
-rw-r--r--arch/mips/boot/dts/mti/malta.dts117
-rw-r--r--arch/mips/boot/dts/mti/sead3.dts259
-rw-r--r--arch/mips/boot/dts/netlogic/Makefile8
-rw-r--r--arch/mips/boot/dts/netlogic/xlp_evp.dts131
-rw-r--r--arch/mips/boot/dts/netlogic/xlp_fvp.dts131
-rw-r--r--arch/mips/boot/dts/netlogic/xlp_gvp.dts89
-rw-r--r--arch/mips/boot/dts/netlogic/xlp_rvp.dts89
-rw-r--r--arch/mips/boot/dts/netlogic/xlp_svp.dts131
-rw-r--r--arch/mips/boot/dts/ni/169445.dts100
-rw-r--r--arch/mips/boot/dts/ni/Makefile2
-rw-r--r--arch/mips/boot/dts/pic32/Makefile7
-rw-r--r--arch/mips/boot/dts/pic32/pic32mzda.dtsi298
-rw-r--r--arch/mips/boot/dts/pic32/pic32mzda_sk.dts148
-rw-r--r--arch/mips/boot/dts/qca/Makefile7
-rw-r--r--arch/mips/boot/dts/qca/ar9132.dtsi171
-rw-r--r--arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts112
-rw-r--r--arch/mips/boot/dts/qca/ar9331.dtsi299
-rw-r--r--arch/mips/boot/dts/qca/ar9331_dpt_module.dts101
-rw-r--r--arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts102
-rw-r--r--arch/mips/boot/dts/qca/ar9331_omega.dts78
-rw-r--r--arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts118
-rw-r--r--arch/mips/boot/dts/ralink/Makefile9
-rw-r--r--arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts205
-rw-r--r--arch/mips/boot/dts/ralink/mt7620a.dtsi59
-rw-r--r--arch/mips/boot/dts/ralink/mt7620a_eval.dts18
-rw-r--r--arch/mips/boot/dts/ralink/mt7628a.dtsi298
-rw-r--r--arch/mips/boot/dts/ralink/omega2p.dts18
-rw-r--r--arch/mips/boot/dts/ralink/rt2880.dtsi59
-rw-r--r--arch/mips/boot/dts/ralink/rt2880_eval.dts48
-rw-r--r--arch/mips/boot/dts/ralink/rt3050.dtsi69
-rw-r--r--arch/mips/boot/dts/ralink/rt3052_eval.dts52
-rw-r--r--arch/mips/boot/dts/ralink/rt3883.dtsi59
-rw-r--r--arch/mips/boot/dts/ralink/rt3883_eval.dts18
-rw-r--r--arch/mips/boot/dts/ralink/vocore2.dts18
-rw-r--r--arch/mips/boot/dts/xilfpga/Makefile2
-rw-r--r--arch/mips/boot/dts/xilfpga/microAptiv.dtsi22
-rw-r--r--arch/mips/boot/dts/xilfpga/nexys4ddr.dts118
-rw-r--r--arch/mips/boot/ecoff.h65
-rw-r--r--arch/mips/boot/elf2ecoff.c621
-rw-r--r--arch/mips/boot/tools/.gitignore2
-rw-r--r--arch/mips/boot/tools/Makefile9
-rw-r--r--arch/mips/boot/tools/relocs.c681
-rw-r--r--arch/mips/boot/tools/relocs.h46
-rw-r--r--arch/mips/boot/tools/relocs_32.c18
-rw-r--r--arch/mips/boot/tools/relocs_64.c31
-rw-r--r--arch/mips/boot/tools/relocs_main.c85
140 files changed, 20661 insertions, 0 deletions
diff --git a/arch/mips/boot/.gitignore b/arch/mips/boot/.gitignore
new file mode 100644
index 000000000..2adc8581a
--- /dev/null
+++ b/arch/mips/boot/.gitignore
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+mkboot
+elf2ecoff
+vmlinux.*
+zImage
+zImage.tmp
+calc_vmlinuz_load_addr
+uImage
diff --git a/arch/mips/boot/Makefile b/arch/mips/boot/Makefile
new file mode 100644
index 000000000..a3da2c5d6
--- /dev/null
+++ b/arch/mips/boot/Makefile
@@ -0,0 +1,173 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995, 1998, 2001, 2002 by Ralf Baechle
+# Copyright (C) 2004 Maciej W. Rozycki
+#
+
+#
+# Some DECstations need all possible sections of an ECOFF executable
+#
+ifdef CONFIG_MACH_DECSTATION
+ e2eflag := -a
+endif
+
+#
+# Drop some uninteresting sections in the kernel.
+# This is only relevant for ELF kernels but doesn't hurt a.out
+#
+drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+strip-flags := $(addprefix --remove-section=,$(drop-sections))
+
+hostprogs := elf2ecoff
+
+suffix-y := bin
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_LZMA) := lzma
+suffix-$(CONFIG_KERNEL_LZO) := lzo
+
+targets := vmlinux.ecoff
+quiet_cmd_ecoff = ECOFF $@
+ cmd_ecoff = $(obj)/elf2ecoff $(VMLINUX) $@ $(e2eflag)
+$(obj)/vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX) FORCE
+ $(call if_changed,ecoff)
+
+targets += vmlinux.bin
+quiet_cmd_bin = OBJCOPY $@
+ cmd_bin = $(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $@
+$(obj)/vmlinux.bin: $(VMLINUX) FORCE
+ $(call if_changed,bin)
+
+targets += vmlinux.srec
+quiet_cmd_srec = OBJCOPY $@
+ cmd_srec = $(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $@
+$(obj)/vmlinux.srec: $(VMLINUX) FORCE
+ $(call if_changed,srec)
+
+UIMAGE_LOADADDR = $(VMLINUX_LOAD_ADDRESS)
+UIMAGE_ENTRYADDR = $(VMLINUX_ENTRY_ADDRESS)
+
+#
+# Compressed vmlinux images
+#
+
+extra-y += vmlinux.bin.bz2
+extra-y += vmlinux.bin.gz
+extra-y += vmlinux.bin.lzma
+extra-y += vmlinux.bin.lzo
+
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
+
+$(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzo)
+
+#
+# Compressed u-boot images
+#
+
+targets += uImage
+targets += uImage.bin
+targets += uImage.bz2
+targets += uImage.gz
+targets += uImage.lzma
+targets += uImage.lzo
+
+$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,uimage,none)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2 FORCE
+ $(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
+ $(call if_changed,uimage,lzma)
+
+$(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo FORCE
+ $(call if_changed,uimage,lzo)
+
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+ @ln -sf $(notdir $<) $@
+ @echo ' Image $@ is ready'
+
+#
+# Flattened Image Tree (.itb) images
+#
+
+ifeq ($(ADDR_BITS),32)
+itb_addr_cells = 1
+endif
+ifeq ($(ADDR_BITS),64)
+itb_addr_cells = 2
+endif
+
+targets += vmlinux.its.S
+
+quiet_cmd_its_cat = CAT $@
+ cmd_its_cat = cat $(real-prereqs) >$@
+
+$(obj)/vmlinux.its.S: $(addprefix $(srctree)/arch/mips/$(PLATFORM)/,$(ITS_INPUTS)) FORCE
+ $(call if_changed,its_cat)
+
+targets += vmlinux.its
+targets += vmlinux.gz.its
+targets += vmlinux.bz2.its
+targets += vmlinux.lzma.its
+targets += vmlinux.lzo.its
+
+quiet_cmd_cpp_its_S = ITS $@
+ cmd_cpp_its_S = $(CPP) -P -C -o $@ $< \
+ -DKERNEL_NAME="\"Linux $(KERNELRELEASE)\"" \
+ -DVMLINUX_BINARY="\"$(3)\"" \
+ -DVMLINUX_COMPRESSION="\"$(2)\"" \
+ -DVMLINUX_LOAD_ADDRESS=$(VMLINUX_LOAD_ADDRESS) \
+ -DVMLINUX_ENTRY_ADDRESS=$(VMLINUX_ENTRY_ADDRESS) \
+ -DADDR_BITS=$(ADDR_BITS) \
+ -DADDR_CELLS=$(itb_addr_cells)
+
+$(obj)/vmlinux.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
+ $(call if_changed,cpp_its_S,none,vmlinux.bin)
+
+$(obj)/vmlinux.gz.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
+ $(call if_changed,cpp_its_S,gzip,vmlinux.bin.gz)
+
+$(obj)/vmlinux.bz2.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
+ $(call if_changed,cpp_its_S,bzip2,vmlinux.bin.bz2)
+
+$(obj)/vmlinux.lzma.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
+ $(call if_changed,cpp_its_S,lzma,vmlinux.bin.lzma)
+
+$(obj)/vmlinux.lzo.its: $(obj)/vmlinux.its.S $(VMLINUX) FORCE
+ $(call if_changed,cpp_its_S,lzo,vmlinux.bin.lzo)
+
+targets += vmlinux.itb
+targets += vmlinux.gz.itb
+targets += vmlinux.bz2.itb
+targets += vmlinux.lzma.itb
+targets += vmlinux.lzo.itb
+
+quiet_cmd_itb-image = ITB $@
+ cmd_itb-image = \
+ env PATH="$(objtree)/scripts/dtc:$(PATH)" \
+ $(BASH) $(MKIMAGE) \
+ -D "-I dts -O dtb -p 500 \
+ --include $(objtree)/arch/mips \
+ --warning no-unit_address_vs_reg" \
+ -f $(2) $@
+
+$(obj)/vmlinux.itb: $(obj)/vmlinux.its $(obj)/vmlinux.bin FORCE
+ $(call if_changed,itb-image,$<)
+
+$(obj)/vmlinux.%.itb: $(obj)/vmlinux.%.its $(obj)/vmlinux.bin.% FORCE
+ $(call if_changed,itb-image,$<)
diff --git a/arch/mips/boot/compressed/.gitignore b/arch/mips/boot/compressed/.gitignore
new file mode 100644
index 000000000..d35839561
--- /dev/null
+++ b/arch/mips/boot/compressed/.gitignore
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+ashldi3.c
+bswapsi.c
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
new file mode 100644
index 000000000..eae0fad30
--- /dev/null
+++ b/arch/mips/boot/compressed/Makefile
@@ -0,0 +1,155 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.
+#
+# Adapted for MIPS Pete Popov, Dan Malek
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Adapted for PowerPC by Gary Thomas
+# modified by Cort (cort@cs.nmt.edu)
+#
+# Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University
+# Author: Wu Zhangjin <wuzhangjin@gmail.com>
+#
+
+include $(srctree)/arch/mips/Kbuild.platforms
+
+# set the default size of the mallocing area for decompressing
+BOOT_HEAP_SIZE := 0x400000
+
+# Disable Function Tracer
+KBUILD_CFLAGS := $(filter-out -pg, $(KBUILD_CFLAGS))
+
+KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
+
+# Disable lq/sq in zboot
+ifdef CONFIG_CPU_LOONGSON64
+KBUILD_CFLAGS := $(filter-out -march=loongson3a, $(KBUILD_CFLAGS)) -march=mips64r2
+endif
+
+KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ -D__DISABLE_EXPORTS \
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
+
+KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
+ -DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT := n
+UBSAN_SANITIZE := n
+
+# decompressor objects (linked with vmlinuz)
+vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/bswapsi.o
+
+ifdef CONFIG_DEBUG_ZBOOT
+vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT) += $(obj)/dbg.o
+vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o
+vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY) += $(obj)/uart-alchemy.o
+vmlinuzobjs-$(CONFIG_ATH79) += $(obj)/uart-ath79.o
+endif
+
+extra-y += uart-ath79.c
+$(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
+ $(call cmd,shipped)
+
+vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
+
+extra-y += ashldi3.c
+$(obj)/ashldi3.c: $(obj)/%.c: $(srctree)/lib/%.c FORCE
+ $(call if_changed,shipped)
+
+extra-y += bswapsi.c
+$(obj)/bswapsi.c: $(obj)/%.c: $(srctree)/arch/mips/lib/%.c FORCE
+ $(call if_changed,shipped)
+
+targets := $(notdir $(vmlinuzobjs-y))
+
+targets += vmlinux.bin
+OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
+$(obj)/vmlinux.bin: $(KBUILD_IMAGE) FORCE
+ $(call if_changed,objcopy)
+
+tool_$(CONFIG_KERNEL_GZIP) = gzip
+tool_$(CONFIG_KERNEL_BZIP2) = bzip2
+tool_$(CONFIG_KERNEL_LZ4) = lz4
+tool_$(CONFIG_KERNEL_LZMA) = lzma
+tool_$(CONFIG_KERNEL_LZO) = lzo
+tool_$(CONFIG_KERNEL_XZ) = xzkern
+tool_$(CONFIG_KERNEL_ZSTD) = zstd22
+
+targets += vmlinux.bin.z
+$(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,$(tool_y))
+
+targets += piggy.o dummy.o
+OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
+ --set-section-flags=.image=contents,alloc,load,readonly,data
+$(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
+ $(call if_changed,objcopy)
+
+HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
+
+# Calculate the load address of the compressed kernel image
+hostprogs := calc_vmlinuz_load_addr
+
+ifneq ($(zload-y),)
+VMLINUZ_LOAD_ADDRESS := $(zload-y)
+else
+VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
+ $(obj)/vmlinux.bin $(LINKER_LOAD_ADDRESS))
+endif
+UIMAGE_LOADADDR = $(VMLINUZ_LOAD_ADDRESS)
+
+vmlinuzobjs-y += $(obj)/piggy.o
+
+quiet_cmd_zld = LD $@
+ cmd_zld = $(LD) $(KBUILD_LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T $< $(vmlinuzobjs-y) -o $@
+quiet_cmd_strip = STRIP $@
+ cmd_strip = $(STRIP) -s $@
+vmlinuz: $(src)/ld.script $(vmlinuzobjs-y) $(obj)/calc_vmlinuz_load_addr
+ $(call cmd,zld)
+ $(call cmd,strip)
+
+#
+# Some DECstations need all possible sections of an ECOFF executable
+#
+ifdef CONFIG_MACH_DECSTATION
+ e2eflag := -a
+endif
+
+# elf2ecoff can only handle 32bit image
+hostprogs += ../elf2ecoff
+
+ifdef CONFIG_32BIT
+ VMLINUZ = vmlinuz
+else
+ VMLINUZ = vmlinuz.32
+endif
+
+quiet_cmd_32 = OBJCOPY $@
+ cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+vmlinuz.32: vmlinuz
+ $(call cmd,32)
+
+quiet_cmd_ecoff = ECOFF $@
+ cmd_ecoff = $< $(VMLINUZ) $@ $(e2eflag)
+vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
+ $(call cmd,ecoff)
+
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
+vmlinuz.bin: vmlinuz
+ $(call cmd,objcopy)
+
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
+vmlinuz.srec: vmlinuz
+ $(call cmd,objcopy)
+
+uzImage.bin: vmlinuz.bin FORCE
+ $(call if_changed,uimage,none)
+
+clean-files += $(objtree)/vmlinuz
+clean-files += $(objtree)/vmlinuz.32
+clean-files += $(objtree)/vmlinuz.ecoff
+clean-files += $(objtree)/vmlinuz.bin
+clean-files += $(objtree)/vmlinuz.srec
diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
new file mode 100644
index 000000000..080b926d2
--- /dev/null
+++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2010 "Wu Zhangjin" <wuzhangjin@gmail.com>
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <linux/sizes.h>
+
+int main(int argc, char *argv[])
+{
+ unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr;
+ struct stat sb;
+
+ if (argc != 3) {
+ fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n",
+ argv[0]);
+ return EXIT_FAILURE;
+ }
+
+ if (stat(argv[1], &sb) == -1) {
+ perror("stat");
+ return EXIT_FAILURE;
+ }
+
+ /* Convert hex characters to dec number */
+ errno = 0;
+ if (sscanf(argv[2], "%llx", &vmlinux_load_addr) != 1) {
+ if (errno != 0)
+ perror("sscanf");
+ else
+ fprintf(stderr, "No matching characters\n");
+
+ return EXIT_FAILURE;
+ }
+
+ vmlinux_size = (uint64_t)sb.st_size;
+ vmlinuz_load_addr = vmlinux_load_addr + vmlinux_size;
+
+ /*
+ * Align with 64KB: KEXEC needs load sections to be aligned to PAGE_SIZE,
+ * which may be as large as 64KB depending on the kernel configuration.
+ */
+
+ vmlinuz_load_addr += (SZ_64K - vmlinux_size % SZ_64K);
+
+ printf("0x%llx\n", vmlinuz_load_addr);
+
+ return EXIT_SUCCESS;
+}
diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c
new file mode 100644
index 000000000..f6728a8fd
--- /dev/null
+++ b/arch/mips/boot/compressed/dbg.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MIPS-specific debug support for pre-boot environment
+ *
+ * NOTE: putc() is board specific, if your board have a 16550 compatible uart,
+ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
+ * need to implement your own putc().
+ */
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+void __weak putc(char c)
+{
+}
+
+void puts(const char *s)
+{
+ char c;
+ while ((c = *s++) != '\0') {
+ putc(c);
+ if (c == '\n')
+ putc('\r');
+ }
+}
+
+void puthex(unsigned long long val)
+{
+
+ unsigned char buf[10];
+ int i;
+ for (i = 7; i >= 0; i--) {
+ buf[i] = "0123456789ABCDEF"[val & 0x0F];
+ val >>= 4;
+ }
+ buf[8] = '\0';
+ puts(buf);
+}
diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c
new file mode 100644
index 000000000..1e91155be
--- /dev/null
+++ b/arch/mips/boot/compressed/decompress.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
+ */
+
+#define DISABLE_BRANCH_PROFILING
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/libfdt.h>
+
+#include <asm/addrspace.h>
+#include <asm/unaligned.h>
+
+/*
+ * These two variables specify the free mem region
+ * that can be used for temporary malloc area
+ */
+unsigned long free_mem_ptr;
+unsigned long free_mem_end_ptr;
+
+/* The linker tells us where the image is. */
+extern unsigned char __image_begin, __image_end;
+
+/* debug interfaces */
+#ifdef CONFIG_DEBUG_ZBOOT
+extern void puts(const char *s);
+extern void puthex(unsigned long long val);
+#else
+#define puts(s) do {} while (0)
+#define puthex(val) do {} while (0)
+#endif
+
+extern char __appended_dtb[];
+
+void error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted");
+
+ while (1)
+ ; /* Halt */
+}
+
+/* activate the code for pre-boot environment */
+#define STATIC static
+
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_BZIP2
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZ4
+#include "../../../../lib/decompress_unlz4.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
+
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
+#ifdef CONFIG_KERNEL_ZSTD
+#include "../../../../lib/decompress_unzstd.c"
+#endif
+
+const unsigned long __stack_chk_guard = 0x000a0dff;
+
+void __stack_chk_fail(void)
+{
+ error("stack-protector: Kernel stack is corrupted\n");
+}
+
+void decompress_kernel(unsigned long boot_heap_start)
+{
+ unsigned long zimage_start, zimage_size;
+
+ zimage_start = (unsigned long)(&__image_begin);
+ zimage_size = (unsigned long)(&__image_end) -
+ (unsigned long)(&__image_begin);
+
+ puts("zimage at: ");
+ puthex(zimage_start);
+ puts(" ");
+ puthex(zimage_size + zimage_start);
+ puts("\n");
+
+ /* This area are prepared for mallocing when decompressing */
+ free_mem_ptr = boot_heap_start;
+ free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;
+
+ /* Display standard Linux/MIPS boot prompt */
+ puts("Uncompressing Linux at load address ");
+ puthex(VMLINUX_LOAD_ADDRESS_ULL);
+ puts("\n");
+
+ /* Decompress the kernel with according algorithm */
+ __decompress((char *)zimage_start, zimage_size, 0, 0,
+ (void *)VMLINUX_LOAD_ADDRESS_ULL, 0, 0, error);
+
+ if (IS_ENABLED(CONFIG_MIPS_RAW_APPENDED_DTB) &&
+ fdt_magic((void *)&__appended_dtb) == FDT_MAGIC) {
+ unsigned int image_size, dtb_size;
+
+ dtb_size = fdt_totalsize((void *)&__appended_dtb);
+
+ /* last four bytes is always image size in little endian */
+ image_size = get_unaligned_le32((void *)&__image_end - 4);
+
+ /* copy dtb to where the booted kernel will expect it */
+ memcpy((void *)VMLINUX_LOAD_ADDRESS_ULL + image_size,
+ __appended_dtb, dtb_size);
+ }
+
+ /* FIXME: should we flush cache here? */
+ puts("Now, booting the kernel...\n");
+}
diff --git a/arch/mips/boot/compressed/dummy.c b/arch/mips/boot/compressed/dummy.c
new file mode 100644
index 000000000..31dbf45bf
--- /dev/null
+++ b/arch/mips/boot/compressed/dummy.c
@@ -0,0 +1,4 @@
+int main(void)
+{
+ return 0;
+}
diff --git a/arch/mips/boot/compressed/head.S b/arch/mips/boot/compressed/head.S
new file mode 100644
index 000000000..409cb483a
--- /dev/null
+++ b/arch/mips/boot/compressed/head.S
@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995 Waldorf Electronics
+ * Written by Ralf Baechle and Andreas Busse
+ * Copyright (C) 1995 - 1999 Ralf Baechle
+ * Copyright (C) 1996 Paul M. Antoine
+ * Modified for DECStation and hence R3000 support by Paul M. Antoine
+ * Further modifications by David S. Miller and Harald Koerfgen
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+ .set noreorder
+ .cprestore
+ LEAF(start)
+start:
+ /* Save boot rom start args */
+ move s0, a0
+ move s1, a1
+ move s2, a2
+ move s3, a3
+
+ /* Clear BSS */
+ PTR_LA a0, _edata
+ PTR_LA a2, _end
+1: sw zero, 0(a0)
+ bne a2, a0, 1b
+ addiu a0, a0, 4
+
+ PTR_LA a0, (.heap) /* heap address */
+ PTR_LA sp, (.stack + 8192) /* stack address */
+
+ PTR_LA ra, 2f
+ PTR_LA k0, decompress_kernel
+ jr k0
+ nop
+2:
+ move a0, s0
+ move a1, s1
+ move a2, s2
+ move a3, s3
+ PTR_LI k0, KERNEL_ENTRY
+ jr k0
+ nop
+3:
+ b 3b
+ nop
+ END(start)
+
+ .comm .heap,BOOT_HEAP_SIZE,4
+ .comm .stack,4096*2,4
diff --git a/arch/mips/boot/compressed/ld.script b/arch/mips/boot/compressed/ld.script
new file mode 100644
index 000000000..2ed08fbef
--- /dev/null
+++ b/arch/mips/boot/compressed/ld.script
@@ -0,0 +1,57 @@
+/*
+ * ld.script for compressed kernel support of MIPS
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzhanjing@gmail.com>
+ * Copyright (C) 2010 "Wu Zhangjin" <wuzhanjing@gmail.com>
+ */
+
+OUTPUT_ARCH(mips)
+ENTRY(start)
+PHDRS {
+ text PT_LOAD FLAGS(7); /* RWX */
+}
+SECTIONS
+{
+ /* Text and read-only data */
+ /* . = VMLINUZ_LOAD_ADDRESS; */
+ .text : {
+ *(.text)
+ *(.rodata)
+ }: text
+ /* End of text section */
+
+ /* Writable data */
+ .data : {
+ *(.data)
+ /* Put the compressed image here */
+ __image_begin = .;
+ *(.image)
+ __image_end = .;
+ CONSTRUCTORS
+ . = ALIGN(16);
+ }
+ __appended_dtb = .;
+ /* leave space for appended DTB */
+ . += 0x100000;
+
+ _edata = .;
+ /* End of data section */
+
+ /* BSS */
+ .bss : {
+ *(.bss)
+ }
+ . = ALIGN(16);
+ _end = .;
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.MIPS.options)
+ *(.options)
+ *(.pdr)
+ *(.reginfo)
+ *(.comment)
+ *(.note)
+ }
+}
diff --git a/arch/mips/boot/compressed/string.c b/arch/mips/boot/compressed/string.c
new file mode 100644
index 000000000..0b593b709
--- /dev/null
+++ b/arch/mips/boot/compressed/string.c
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/mips/boot/compressed/string.c
+ *
+ * Very small subset of simple string routines
+ */
+
+#include <linux/compiler_attributes.h>
+#include <linux/types.h>
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ int i;
+ const char *s = src;
+ char *d = dest;
+
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ return dest;
+}
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = s;
+
+ for (i = 0; i < n; i++)
+ ss[i] = c;
+ return s;
+}
+
+void * __weak memmove(void *dest, const void *src, size_t n)
+{
+ unsigned int i;
+ const char *s = src;
+ char *d = dest;
+
+ if ((uintptr_t)dest < (uintptr_t)src) {
+ for (i = 0; i < n; i++)
+ d[i] = s[i];
+ } else {
+ for (i = n; i > 0; i--)
+ d[i - 1] = s[i - 1];
+ }
+ return dest;
+}
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
new file mode 100644
index 000000000..aee8d7b8f
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * 16550 compatible uart based serial debug support for zboot
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/addrspace.h>
+
+#if defined(CONFIG_MACH_LOONGSON64) || defined(CONFIG_MIPS_MALTA)
+#define UART_BASE 0x1fd003f8
+#define PORT(offset) (CKSEG1ADDR(UART_BASE) + (offset))
+#endif
+
+#ifdef CONFIG_AR7
+#include <ar7.h>
+#define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
+#endif
+
+#ifdef CONFIG_MACH_INGENIC
+#define INGENIC_UART0_BASE_ADDR 0x10030000
+#define PORT(offset) (CKSEG1ADDR(INGENIC_UART0_BASE_ADDR) + (4 * offset))
+#endif
+
+#ifdef CONFIG_CPU_XLR
+#define UART0_BASE 0x1EF14000
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
+#ifdef CONFIG_CPU_XLP
+#define UART0_BASE 0x18030100
+#define PORT(offset) (CKSEG1ADDR(UART0_BASE) + (4 * offset))
+#define IOTYPE unsigned int
+#endif
+
+#ifndef IOTYPE
+#define IOTYPE char
+#endif
+
+#ifndef PORT
+#error please define the serial port address for your own machine
+#endif
+
+static inline unsigned int serial_in(int offset)
+{
+ return *((volatile IOTYPE *)PORT(offset)) & 0xFF;
+}
+
+static inline void serial_out(int offset, int value)
+{
+ *((volatile IOTYPE *)PORT(offset)) = value & 0xFF;
+}
+
+void putc(char c)
+{
+ int timeout = 1000000;
+
+ while (((serial_in(UART_LSR) & UART_LSR_THRE) == 0) && (timeout-- > 0))
+ ;
+
+ serial_out(UART_TX, c);
+}
diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c
new file mode 100644
index 000000000..8ec63011e
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-alchemy.c
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <asm/mach-au1x00/au1000.h>
+
+void putc(char c)
+{
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
+}
diff --git a/arch/mips/boot/compressed/uart-prom.c b/arch/mips/boot/compressed/uart-prom.c
new file mode 100644
index 000000000..a8a0a32e0
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-prom.c
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <asm/setup.h>
+
+void putc(char c)
+{
+ prom_putchar(c);
+}
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
new file mode 100644
index 000000000..19027129a
--- /dev/null
+++ b/arch/mips/boot/dts/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-$(CONFIG_BMIPS_GENERIC) += brcm
+subdir-$(CONFIG_CAVIUM_OCTEON_SOC) += cavium-octeon
+subdir-$(CONFIG_MACH_PISTACHIO) += img
+subdir-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += img
+subdir-$(CONFIG_MACH_INGENIC) += ingenic
+subdir-$(CONFIG_LANTIQ) += lantiq
+subdir-$(CONFIG_MACH_LOONGSON64) += loongson
+subdir-$(CONFIG_MSCC_OCELOT) += mscc
+subdir-$(CONFIG_MIPS_MALTA) += mti
+subdir-$(CONFIG_LEGACY_BOARD_SEAD3) += mti
+subdir-$(CONFIG_NLM_XLP_BOARD) += netlogic
+subdir-$(CONFIG_FIT_IMAGE_FDT_NI169445) += ni
+subdir-$(CONFIG_MACH_PIC32) += pic32
+subdir-$(CONFIG_ATH79) += qca
+subdir-$(CONFIG_RALINK) += ralink
+subdir-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += xilfpga
+
+obj-$(CONFIG_BUILTIN_DTB) := $(addsuffix /, $(subdir-y))
diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile
new file mode 100644
index 000000000..d85f446cc
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/Makefile
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb
+dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb
+dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb
+dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb
+dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb
+dtb-$(CONFIG_DT_BCM97346DBSMB) += bcm97346dbsmb.dtb
+dtb-$(CONFIG_DT_BCM97358SVMB) += bcm97358svmb.dtb
+dtb-$(CONFIG_DT_BCM97360SVMB) += bcm97360svmb.dtb
+dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb
+dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb
+dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb
+dtb-$(CONFIG_DT_BCM97435SVMB) += bcm97435svmb.dtb
+dtb-$(CONFIG_DT_COMTREND_VR3032U) += bcm63268-comtrend-vr-3032u.dtb
+dtb-$(CONFIG_DT_NETGEAR_CVG834G) += bcm3368-netgear-cvg834g.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX4_SERCOMM) += bcm6358-neufbox4-sercomm.dtb
+dtb-$(CONFIG_DT_SFR_NEUFBOX6_SERCOMM) += bcm6362-neufbox6-sercomm.dtb
+
+dtb-$(CONFIG_DT_NONE) += \
+ bcm3368-netgear-cvg834g.dtb \
+ bcm6358-neufbox4-sercomm.dtb \
+ bcm6362-neufbox6-sercomm.dtb \
+ bcm63268-comtrend-vr-3032u.dtb \
+ bcm93384wvg.dtb \
+ bcm93384wvg_viper.dtb \
+ bcm96368mvwg.dtb \
+ bcm9ejtagprb.dtb \
+ bcm97125cbmb.dtb \
+ bcm97346dbsmb.dtb \
+ bcm97358svmb.dtb \
+ bcm97360svmb.dtb \
+ bcm97362svmb.dtb \
+ bcm97420c.dtb \
+ bcm97425svmb.dtb \
+ bcm97435svmb.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
new file mode 100644
index 000000000..ed6023a91
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368-netgear-cvg834g.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm3368.dtsi"
+
+/ {
+ compatible = "netgear,cvg834g", "brcm,bcm3368";
+ model = "NETGEAR CVG834G";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3368.dtsi b/arch/mips/boot/dts/brcm/bcm3368.dtsi
new file mode 100644
index 000000000..d4b2b430d
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3368.dtsi
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3368";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <150000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ clkctl: clock-controller@fff8c004 {
+ compatible = "brcm,bcm3368-clocks";
+ reg = <0xfff8c004 0x4>;
+ #clock-cells = <1>;
+ };
+
+ periph_cntl: syscon@fff8c008 {
+ compatible = "syscon";
+ reg = <0xfff8c008 0x4>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@fff8c008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@fff8c00c {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0xfff8c00c 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@fff8c100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfff8c100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ uart1: serial@fff8c120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfff8c120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi
new file mode 100644
index 000000000..eb2a9c6ed
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper";
+
+ memory@0 {
+ device_type = "memory";
+
+ /* Typical ranges. The bootloader should fill these in. */
+ reg = <0x06000000 0x02000000>,
+ <0x0e000000 0x02000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 1/2 of the CPU core clock (standard MIPS behavior) */
+ mips-hpt-frequency = <300000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "brcm,ubus", "simple-bus";
+ ranges;
+ /* No dma-ranges on Viper. */
+
+ periph_intc: periph_intc@14e00048 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x14e00048 0x4 0x14e0004c 0x4>,
+ <0x14e00350 0x4 0x14e00354 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
+
+ cmips_intc: cmips_intc@151f8048 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x151f8048 0x4 0x151f804c 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ brcm,int-map-mask = <0xffffffff>;
+ };
+
+ uart0: serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15400300 {
+ compatible = "brcm,bcm3384-ehci", "generic-ehci";
+ reg = <0x15400300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ ohci0: usb@15400400 {
+ compatible = "brcm,bcm3384-ohci", "generic-ohci";
+ reg = <0x15400400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi
new file mode 100644
index 000000000..d7ad769a4
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm3384", "brcm,bcm33843";
+
+ memory@0 {
+ device_type = "memory";
+
+ /* Typical range. The bootloader should fill this in. */
+ reg = <0x0 0x08000000>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* On BMIPS5000 this is 1/8th of the CPU core clock */
+ mips-hpt-frequency = <100000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ cpu_intc: cpu_intc {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <54000000>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "brcm,ubus", "simple-bus";
+ ranges;
+ dma-ranges = <0x00000000 0x08000000 0x08000000>,
+ <0x08000000 0x00000000 0x08000000>;
+
+ periph_intc: periph_intc@14e00038 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x14e00038 0x4 0x14e0003c 0x4>,
+ <0x14e00340 0x4 0x14e00344 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <4>;
+ };
+
+ zmips_intc: zmips_intc@104b0060 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x104b0060 0x4 0x104b0064 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <29>;
+ brcm,int-map-mask = <0xffffffff>;
+ };
+
+ iop_intc: iop_intc@14e00058 {
+ compatible = "brcm,bcm3380-l2-intc";
+ reg = <0x14e00058 0x4 0x14e0005c 0x4>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <6>;
+ brcm,int-map-mask = <0xffffffff>;
+ };
+
+ uart0: serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ status = "disabled";
+ };
+
+ ehci0: usb@15400300 {
+ compatible = "brcm,bcm3384-ehci", "generic-ehci";
+ reg = <0x15400300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+
+ ohci0: usb@15400400 {
+ compatible = "brcm,bcm3384-ohci", "generic-ohci";
+ reg = <0x15400400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
new file mode 100644
index 000000000..8d010b919
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268-comtrend-vr-3032u.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm63268.dtsi"
+
+/ {
+ compatible = "comtrend,vr-3032u", "brcm,bcm63268";
+ model = "Comtrend VR-3032u";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&leds0 {
+ status = "okay";
+ brcm,serial-leds;
+ brcm,serial-dat-low;
+ brcm,serial-shift-inv;
+
+ led@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ /* GPHY0 Speed 0 */
+ };
+ led@1 {
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <1>;
+ /* GPHY0 Speed 1 */
+ };
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "vr-3032u:red:inet";
+ };
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "vr-3032u:green:dsl";
+ };
+ led@4 {
+ reg = <4>;
+ active-low;
+ label = "vr-3032u:green:usb";
+ };
+ led@7 {
+ reg = <7>;
+ active-low;
+ label = "vr-3032u:green:wps";
+ };
+ led@8 {
+ reg = <8>;
+ active-low;
+ label = "vr-3032u:green:inet";
+ };
+ led@9 {
+ reg = <9>;
+ brcm,hardware-controlled;
+ /* EPHY0 Activity */
+ };
+ led@10 {
+ reg = <10>;
+ brcm,hardware-controlled;
+ /* EPHY1 Activity */
+ };
+ led@11 {
+ reg = <11>;
+ brcm,hardware-controlled;
+ /* EPHY2 Activity */
+ };
+ led@12 {
+ reg = <12>;
+ brcm,hardware-controlled;
+ /* GPHY0 Activity */
+ };
+ led@13 {
+ reg = <13>;
+ brcm,hardware-controlled;
+ /* EPHY0 Speed */
+ };
+ led@14 {
+ reg = <14>;
+ brcm,hardware-controlled;
+ /* EPHY1 Speed */
+ };
+ led@15 {
+ reg = <15>;
+ brcm,hardware-controlled;
+ /* EPHY2 Speed */
+ };
+ led@20 {
+ reg = <20>;
+ active-low;
+ label = "vr-3032u:green:power";
+ default-state = "on";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm63268.dtsi b/arch/mips/boot/dts/brcm/bcm63268.dtsi
new file mode 100644
index 000000000..365fa75cd
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm63268.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm63268";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ clkctl: clock-controller@10000004 {
+ compatible = "brcm,bcm63268-clocks";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+
+ periph_cntl: syscon@10000008 {
+ compatible = "syscon";
+ reg = <0x10000008 0x4>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x20>,
+ <0x10000040 0x20>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ uart0: serial@10000180 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000180 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ uart1: serial@100001a0 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x100001a0 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <34>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ leds0: led-controller@10001900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10001900 0x24>;
+
+ status = "disabled";
+ };
+
+ periph_pwr: power-controller@1000184c {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x1000184c 0x4>;
+ #power-domain-cells = <1>;
+ };
+
+ ehci: usb@10002500 {
+ compatible = "brcm,bcm63268-ehci", "generic-ehci";
+ reg = <0x10002500 0x100>;
+ big-endian;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+
+ status = "disabled";
+ };
+
+ ohci: usb@10002600 {
+ compatible = "brcm,bcm63268-ohci", "generic-ohci";
+ reg = <0x10002600 0x100>;
+ big-endian;
+ no-big-frame-no;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <9>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
new file mode 100644
index 000000000..1f9edd710
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6328";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <160000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ clkctl: clock-controller@10000004 {
+ compatible = "brcm,bcm6328-clocks";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x10>,
+ <0x10000030 0x10>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <28>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <39>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+
+ timer: syscon@10000040 {
+ compatible = "syscon";
+ reg = <0x10000040 0x2c>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000068 {
+ compatible = "syscon-reboot";
+ regmap = <&timer>;
+ offset = <0x28>;
+ mask = <0x1>;
+ };
+
+ leds0: led-controller@10000800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10000800 0x24>;
+ status = "disabled";
+ };
+
+ periph_pwr: power-controller@10001848 {
+ compatible = "brcm,bcm6328-power-controller";
+ reg = <0x10001848 0x4>;
+ #power-domain-cells = <1>;
+ };
+
+ ehci: usb@10002500 {
+ compatible = "brcm,bcm6328-ehci", "generic-ehci";
+ reg = <0x10002500 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <42>;
+ status = "disabled";
+ };
+
+ ohci: usb@10002600 {
+ compatible = "brcm,bcm6328-ohci", "generic-ohci";
+ reg = <0x10002600 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
new file mode 100644
index 000000000..53e57cc29
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358-neufbox4-sercomm.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6358.dtsi"
+
+/ {
+ compatible = "sfr,nb4-ser", "brcm,bcm6358";
+ model = "SFR Neufbox 4 (Sercomm)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&leds0 {
+ status = "okay";
+
+ led@0 {
+ reg = <0>;
+ active-low;
+ label = "nb4-ser:white:alarm";
+ };
+ led@2 {
+ reg = <2>;
+ active-low;
+ label = "nb4-ser:white:tv";
+ };
+ led@3 {
+ reg = <3>;
+ active-low;
+ label = "nb4-ser:white:tel";
+ };
+ led@4 {
+ reg = <4>;
+ active-low;
+ label = "nb4-ser:white:adsl";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi
new file mode 100644
index 000000000..89a3107ca
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6358";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <150000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ clkctl: clock-controller@fffe0004 {
+ compatible = "brcm,bcm6358-clocks";
+ reg = <0xfffe0004 0x4>;
+ #clock-cells = <1>;
+ };
+
+ periph_cntl: syscon@fffe0008 {
+ compatible = "syscon";
+ reg = <0xfffe0008 0x4>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@fffe0008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@fffe000c {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0xfffe000c 0x8>,
+ <0xfffe0038 0x8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ leds0: led-controller@fffe00d0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6358-leds";
+ reg = <0xfffe00d0 0x8>;
+
+ status = "disabled";
+ };
+
+ uart0: serial@fffe0100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfffe0100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ uart1: serial@fffe0120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0xfffe0120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ ehci: usb@fffe1300 {
+ compatible = "brcm,bcm6358-ehci", "generic-ehci";
+ reg = <0xfffe1300 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ ohci: usb@fffe1400 {
+ compatible = "brcm,bcm6358-ohci", "generic-ohci";
+ reg = <0xfffe1400 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
new file mode 100644
index 000000000..3e83bee5b
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362-neufbox6-sercomm.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6362.dtsi"
+
+/ {
+ compatible = "sfr,nb6-ser", "brcm,bcm6362";
+ model = "SFR NeufBox 6 (Sercomm)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
new file mode 100644
index 000000000..0b2adefd7
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6362";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ clkctl: clock-controller@10000004 {
+ compatible = "brcm,bcm6362-clocks";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+
+ periph_cntl: syscon@10000008 {
+ compatible = "syscon";
+ reg = <0x10000008 0x4>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x10>,
+ <0x10000030 0x10>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <4>;
+
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+
+ status = "disabled";
+ };
+
+ periph_pwr: power-controller@10001848 {
+ compatible = "brcm,bcm6362-power-controller";
+ reg = <0x10001848 0x4>;
+ #power-domain-cells = <1>;
+ };
+
+ leds0: led-controller@10001900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-leds";
+ reg = <0x10001900 0x24>;
+
+ status = "disabled";
+ };
+
+ ehci: usb@10002500 {
+ compatible = "brcm,bcm6362-ehci", "generic-ehci";
+ reg = <0x10002500 0x100>;
+ big-endian;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <10>;
+
+ status = "disabled";
+ };
+
+ ohci: usb@10002600 {
+ compatible = "brcm,bcm6362-ohci", "generic-ohci";
+ reg = <0x10002600 0x100>;
+ big-endian;
+ no-big-frame-no;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <9>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
new file mode 100644
index 000000000..b84a3bfe8
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm6368";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <200000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4350";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ubus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges;
+
+ clkctl: clock-controller@10000004 {
+ compatible = "brcm,bcm6368-clocks";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+
+ periph_cntl: syscon@100000008 {
+ compatible = "syscon";
+ reg = <0x10000008 0x4>;
+ native-endian;
+ };
+
+ reboot: syscon-reboot@10000008 {
+ compatible = "syscon-reboot";
+ regmap = <&periph_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_intc: interrupt-controller@10000020 {
+ compatible = "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x10>,
+ <0x10000030 0x10>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ leds0: led-controller@100000d0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6358-leds";
+ reg = <0x100000d0 0x8>;
+ status = "disabled";
+ };
+
+ uart0: serial@10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+
+ uart1: serial@10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <3>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "disabled";
+ };
+
+ ehci: usb@10001500 {
+ compatible = "brcm,bcm6368-ehci", "generic-ehci";
+ reg = <0x10001500 0x100>;
+ big-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <7>;
+ status = "disabled";
+ };
+
+ ohci: usb@10001600 {
+ compatible = "brcm,bcm6368-ohci", "generic-ohci";
+ reg = <0x10001600 0x100>;
+ big-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
new file mode 100644
index 000000000..5bf77b6fc
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7125";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <202500000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4380";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4380";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@441400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x441400 0x30>, <0x441600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: interrupt-controller@401800 {
+ compatible = "brcm,l2-intc";
+ reg = <0x401800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <23>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x2f7>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
+ "bsp_0", "rdc_0", "rptd_0",
+ "avd_0", "jtag_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0xf000000>, <0x100000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <18>, <19>, <20>;
+ interrupt-names = "upg_main", "upg_bsc", "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7125-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x60c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,bcm7038-reboot";
+ syscon = <&sun_top_ctrl 0x8 0x14>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <21>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <64>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406380 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406380 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4067e8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4067e8 0x14>;
+ status = "disabled";
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 18>;
+ };
+
+ ehci0: usb@488300 {
+ compatible = "brcm,bcm7125-ehci", "generic-ehci";
+ reg = <0x488300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>;
+ status = "disabled";
+ };
+
+ ohci0: usb@488400 {
+ compatible = "brcm,bcm7125-ohci", "generic-ohci";
+ reg = <0x488400 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@411d00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411d00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <79>;
+ };
+
+ qspi: spi@443000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@406400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x406400 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
new file mode 100644
index 000000000..2afa0dada
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7346";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <163125000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@411400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x411400 0x30>, <0x411600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: interrupt-controller@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <51>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x673>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "jtag_0", "svd_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0xf000000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <59>, <57>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x408b80 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>, <58>, <62>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406900 {
+ compatible = "ns16550a";
+ reg = <0x406900 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <64>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406940 {
+ compatible = "ns16550a";
+ reg = <0x406940 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406980 {
+ compatible = "ns16550a";
+ reg = <0x406980 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406380 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406380 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@408980 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x408980 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4067e8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4067e8 0x14>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <53>;
+ brcm,irq-can-wake;
+ };
+
+ aon_ctrl: syscon@408000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x408000 0x100>, <0x408200 0x200>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
+ timers: timer@4067c0 {
+ compatible = "brcm,brcmstb-timers";
+ reg = <0x4067c0 0x40>;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 16>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <27 32 2>;
+ };
+
+ enet0: ethernet@430000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x430000 0x4c8c>;
+ interrupts = <24>, <25>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <68>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+
+ ehci1: usb@480500 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x480500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <69>;
+ status = "disabled";
+ };
+
+ ohci1: usb@480600 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x480600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ehci2: usb@490300 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x490300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <73>;
+ status = "disabled";
+ };
+
+ ohci2: usb@490400 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x490400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <75>;
+ status = "disabled";
+ };
+
+ ehci3: usb@490500 {
+ compatible = "brcm,bcm7346-ehci", "generic-ehci";
+ reg = <0x490500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <74>;
+ status = "disabled";
+ };
+
+ ohci3: usb@490600 {
+ compatible = "brcm,bcm7346-ohci", "generic-ohci";
+ reg = <0x490600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <76>;
+ status = "disabled";
+ };
+
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sdhci0: sdhci@413500 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x413500 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <85>;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@411d00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411d00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <31>;
+ };
+
+ qspi: spi@413000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@408a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x408a00 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+
+ waketimer: waketimer@408e80 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0x408e80 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ interrupt-names = "timer";
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+ };
+
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x103b0000 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory-controller@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x0 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
new file mode 100644
index 000000000..6375fc77f
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7358";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <375000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips3300";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@411400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x411400 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ sun_l2_intc: interrupt-controller@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <48>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x2f3>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "avd_0", "jtag_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406600 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406600 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0x7000000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <56>, <54>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x408b80 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <57>, <55>, <59>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7358-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406800 {
+ compatible = "ns16550a";
+ reg = <0x406800 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@408980 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x408980 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406700 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406700 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4066a8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4066a8 0x14>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408240 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408240 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
+ enet0: ethernet@430000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x430000 0x4c8c>;
+ interrupts = <24>, <25>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7358-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7358-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ status = "disabled";
+ };
+
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@411d00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411d00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <31>;
+ };
+
+ qspi: spi@413000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@408a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x408a00 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+
+ waketimer: waketimer@408e80 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0x408e80 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ interrupt-names = "timer";
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
new file mode 100644
index 000000000..a57cacea9
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7360";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <375000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips3300";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@411400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x411400 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>;
+ };
+
+ sun_l2_intc: interrupt-controller@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <48>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x2f3>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "avd_0", "jtag_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406600 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406600 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0x7000000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <56>, <54>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x408b80 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <57>, <55>, <59>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7360-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406800 {
+ compatible = "ns16550a";
+ reg = <0x406800 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@408980 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x408980 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4066a8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4066a8 0x14>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ aon_ctrl: syscon@408000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x408000 0x100>, <0x408200 0x200>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
+ timers: timer@406680 {
+ compatible = "brcm,brcmstb-timers";
+ reg = <0x406680 0x40>;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
+ enet0: ethernet@430000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x430000 0x4c8c>;
+ interrupts = <24>, <25>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7360-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7360-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ status = "disabled";
+ };
+
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <86>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sdhci0: sdhci@410000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x410000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <82>;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@411d00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411d00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <31>;
+ };
+
+ qspi: spi@413000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@408a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x408a00 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+
+ waketimer: waketimer@408e80 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0x408e80 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ interrupt-names = "timer";
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+ };
+
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x103b0000 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory-controller@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x0 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
new file mode 100644
index 000000000..728b9e9f8
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7362";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <375000000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips4380";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips4380";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@411400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x411400 0x30>, <0x411600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: interrupt-controller@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <48>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x2f3>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "avd_0", "jtag_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406600 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406600 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0x7000000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <56>, <54>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: interrupt-controller@408b80 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x408b80 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <57>, <55>, <59>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7362-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406800 {
+ compatible = "ns16550a";
+ reg = <0x406800 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406840 {
+ compatible = "ns16550a";
+ reg = <0x406840 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406880 {
+ compatible = "ns16550a";
+ reg = <0x406880 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscd: i2c@408980 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x408980 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ pwma: pwm@406400 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406400 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4066a8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4066a8 0x14>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ brcm,irq-can-wake;
+ };
+
+ aon_ctrl: syscon@408000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x408000 0x100>, <0x408200 0x200>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
+ timers: timer@406680 {
+ compatible = "brcm,brcmstb-timers";
+ reg = <0x406680 0x40>;
+ };
+
+ upg_gio: gpio@406500 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406500 0xa0>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 29 4>;
+ };
+
+ upg_gio_aon: gpio@408c00 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x408c00 0x60>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <21 32 2>;
+ };
+
+ enet0: ethernet@430000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x430000 0x4c8c>;
+ interrupts = <24>, <25>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v2";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7362-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7362-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ status = "disabled";
+ };
+
+ hif_l2_intc: interrupt-controller@411000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <30>;
+ };
+
+ nand: nand@412800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand";
+ reg = <0x412800 0x400>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <86>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sdhci0: sdhci@410000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x410000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <82>;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@411d00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411d00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <31>;
+ };
+
+ qspi: spi@413000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@408a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x408a00 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+
+ waketimer: waketimer@408e80 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0x408e80 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ interrupt-names = "timer";
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+ };
+
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x103b0000 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory-controller@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x0 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
new file mode 100644
index 000000000..9540c27f1
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7420";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <93750000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@441400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x441400 0x30>, <0x441600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: interrupt-controller@401800 {
+ compatible = "brcm,l2-intc";
+ reg = <0x401800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <23>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x3ff>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0",
+ "pcie_0", "bsp_0", "rdc_0",
+ "rptd_0", "avd_0", "avd_1",
+ "jtag_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0x1f000000>, <0x100000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <18>, <19>, <20>;
+ interrupt-names = "upg_main", "upg_bsc", "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x60c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,bcm7038-reboot";
+ syscon = <&sun_top_ctrl 0x8 0x14>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <21>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <64>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406380 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406380 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@406800 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406800 0x58>;
+ interrupts = <28>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406880 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406880 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4067e8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4067e8 0x14>;
+ status = "disabled";
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 27>;
+ };
+
+ enet0: ethernet@468000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v1";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x468000 0x3c8c>;
+ interrupts = <69>, <79>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v1";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,65nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@488300 {
+ compatible = "brcm,bcm7420-ehci", "generic-ehci";
+ reg = <0x488300 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>;
+ status = "disabled";
+ };
+
+ ohci0: usb@488400 {
+ compatible = "brcm,bcm7420-ohci", "generic-ohci";
+ reg = <0x488400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ status = "disabled";
+ };
+
+ ehci1: usb@488500 {
+ compatible = "brcm,bcm7420-ehci", "generic-ehci";
+ reg = <0x488500 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <55>;
+ status = "disabled";
+ };
+
+ ohci1: usb@488600 {
+ compatible = "brcm,bcm7420-ohci", "generic-ohci";
+ reg = <0x488600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@411d00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x411d00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <78>;
+ };
+
+ qspi: spi@443000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@406400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x406400 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
new file mode 100644
index 000000000..aa0b2d39c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7425";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <163125000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5000";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@41a400 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x41a400 0x30>, <0x41a600 0x30>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+ };
+
+ sun_l2_intc: interrupt-controller@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <47>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7400-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0x177b>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0",
+ "bsp_0", "rdc_0",
+ "raaga_0", "avd_1",
+ "jtag_0", "svd_0",
+ "vice_0";
+ };
+
+ upg_irq0_intc: interrupt-controller@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0x7000000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <55>, <53>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: interrupt-controller@409480 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x409480 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <56>, <54>, <59>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <62>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <63>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@409180 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409180 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@409400 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409400 0x58>;
+ interrupts = <28>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4067e8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4067e8 0x14>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <49>;
+ brcm,irq-can-wake;
+ };
+
+ aon_ctrl: syscon@408000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x408000 0x100>, <0x408200 0x200>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
+ timers: timer@4067c0 {
+ compatible = "brcm,brcmstb-timers";
+ reg = <0x4067c0 0x40>;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
+ enet0: ethernet@b80000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0xb80000 0x11c88>;
+ interrupts = <17>, <18>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <65>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <67>;
+ status = "disabled";
+ };
+
+ ehci1: usb@480500 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x480500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ status = "disabled";
+ };
+
+ ohci1: usb@480600 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x480600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <68>;
+ status = "disabled";
+ };
+
+ ehci2: usb@490300 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x490300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+
+ ohci2: usb@490400 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x490400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <72>;
+ status = "disabled";
+ };
+
+ ehci3: usb@490500 {
+ compatible = "brcm,bcm7425-ehci", "generic-ehci";
+ reg = <0x490500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ohci3: usb@490600 {
+ compatible = "brcm,bcm7425-ohci", "generic-ohci";
+ reg = <0x490600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <73>;
+ status = "disabled";
+ };
+
+ hif_l2_intc: interrupt-controller@41a000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x41a000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <24>;
+ };
+
+ nand: nand@41b800 {
+ compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand", "flash-edu";
+ reg = <0x41b800 0x400>, <0x41bc00 0x24>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <41>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sdhci0: sdhci@419000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x419000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <43>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@419200 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x419200 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <44>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@41ad00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x41ad00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <25>;
+ };
+
+ qspi: spi@41c000 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x419920 0x4 0x41c200 0x188 0x41c000 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@409200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x409200 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+
+ waketimer: waketimer@409580 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0x409580 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ interrupt-names = "timer";
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+ };
+
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x103b0000 0x1a000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory-controller@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x0 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+
+ memory-controller@1 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x10000 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
new file mode 100644
index 000000000..8398b7f68
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "brcm,bcm7435";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mips-hpt-frequency = <175625000>;
+
+ cpu@0 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "brcm,bmips5200";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ clocks {
+ uart_clk: uart_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <81000000>;
+ };
+
+ upg_clk: upg_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ rdb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "simple-bus";
+ ranges = <0 0x10000000 0x01000000>;
+
+ periph_intc: interrupt-controller@41b500 {
+ compatible = "brcm,bcm7038-l1-intc";
+ reg = <0x41b500 0x40>, <0x41b600 0x40>,
+ <0x41b700 0x40>, <0x41b800 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>, <2>, <3>;
+ };
+
+ sun_l2_intc: interrupt-controller@403000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x403000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <52>;
+ };
+
+ gisb-arb@400000 {
+ compatible = "brcm,bcm7435-gisb-arb";
+ reg = <0x400000 0xdc>;
+ native-endian;
+ interrupt-parent = <&sun_l2_intc>;
+ interrupts = <0>, <2>;
+ brcm,gisb-arb-master-mask = <0xf77f>;
+ brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0",
+ "pcie_0", "bsp_0",
+ "rdc_0", "raaga_0",
+ "avd_1", "jtag_0",
+ "svd_0", "vice_0",
+ "vice_1", "raaga_1",
+ "scpu";
+ };
+
+ upg_irq0_intc: interrupt-controller@406780 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x406780 0x8>;
+
+ brcm,int-map-mask = <0x44>, <0x7000000>;
+ brcm,int-fwd-mask = <0x70000>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>, <58>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: interrupt-controller@409480 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x409480 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <61>, <59>, <64>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
+ };
+
+ sun_top_ctrl: syscon@404000 {
+ compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
+ reg = <0x404000 0x51c>;
+ native-endian;
+ };
+
+ reboot {
+ compatible = "brcm,brcmstb-reboot";
+ syscon = <&sun_top_ctrl 0x304 0x308>;
+ };
+
+ uart0: serial@406b00 {
+ compatible = "ns16550a";
+ reg = <0x406b00 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <66>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart1: serial@406b40 {
+ compatible = "ns16550a";
+ reg = <0x406b40 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <67>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ uart2: serial@406b80 {
+ compatible = "ns16550a";
+ reg = <0x406b80 0x20>;
+ reg-io-width = <0x4>;
+ reg-shift = <0x2>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <68>;
+ clocks = <&uart_clk>;
+ status = "disabled";
+ };
+
+ bsca: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@409400 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409400 0x58>;
+ interrupts = <28>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@409180 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x409180 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
+ pwma: pwm@406580 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406580 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ pwmb: pwm@406800 {
+ compatible = "brcm,bcm7038-pwm";
+ reg = <0x406800 0x28>;
+ #pwm-cells = <2>;
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+
+ watchdog: watchdog@4067e8 {
+ clocks = <&upg_clk>;
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x4067e8 0x14>;
+ status = "disabled";
+ };
+
+ aon_pm_l2_intc: interrupt-controller@408440 {
+ compatible = "brcm,l2-intc";
+ reg = <0x408440 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <54>;
+ brcm,irq-can-wake;
+ };
+
+ aon_ctrl: syscon@408000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x408000 0x100>, <0x408200 0x200>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
+ timers: timer@4067c0 {
+ compatible = "brcm,brcmstb-timers";
+ reg = <0x4067c0 0x40>;
+ };
+
+ upg_gio: gpio@406700 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x406700 0x80>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_irq0_intc>;
+ interrupts = <6>;
+ brcm,gpio-bank-widths = <32 32 32 21>;
+ };
+
+ upg_gio_aon: gpio@4094c0 {
+ compatible = "brcm,brcmstb-gpio";
+ reg = <0x4094c0 0x40>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupts = <6>;
+ interrupts-extended = <&upg_aon_irq0_intc 6>,
+ <&aon_pm_l2_intc 5>;
+ wakeup-source;
+ brcm,gpio-bank-widths = <18 4>;
+ };
+
+ enet0: ethernet@b80000 {
+ phy-mode = "internal";
+ phy-handle = <&phy1>;
+ mac-address = [ 00 10 18 36 23 1a ];
+ compatible = "brcm,genet-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0xb80000 0x11c88>;
+ interrupts = <17>, <18>;
+ interrupt-parent = <&periph_intc>;
+ status = "disabled";
+
+ mdio@e14 {
+ compatible = "brcm,genet-mdio-v3";
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ reg = <0xe14 0x8>;
+
+ phy1: ethernet-phy@1 {
+ max-speed = <100>;
+ reg = <0x1>;
+ compatible = "brcm,40nm-ephy",
+ "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ };
+
+ ehci0: usb@480300 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x480300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <70>;
+ status = "disabled";
+ };
+
+ ohci0: usb@480400 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x480400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <72>;
+ status = "disabled";
+ };
+
+ ehci1: usb@480500 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x480500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <71>;
+ status = "disabled";
+ };
+
+ ohci1: usb@480600 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x480600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <73>;
+ status = "disabled";
+ };
+
+ ehci2: usb@490300 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x490300 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <75>;
+ status = "disabled";
+ };
+
+ ohci2: usb@490400 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x490400 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <77>;
+ status = "disabled";
+ };
+
+ ehci3: usb@490500 {
+ compatible = "brcm,bcm7435-ehci", "generic-ehci";
+ reg = <0x490500 0x100>;
+ native-endian;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <76>;
+ status = "disabled";
+ };
+
+ ohci3: usb@490600 {
+ compatible = "brcm,bcm7435-ohci", "generic-ohci";
+ reg = <0x490600 0x100>;
+ native-endian;
+ no-big-frame-no;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <78>;
+ status = "disabled";
+ };
+
+ hif_l2_intc: interrupt-controller@41b000 {
+ compatible = "brcm,l2-intc";
+ reg = <0x41b000 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <24>;
+ };
+
+ nand: nand@41c800 {
+ compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "nand", "flash-dma";
+ reg = <0x41c800 0x600>, <0x41d000 0x100>;
+ interrupt-parent = <&hif_l2_intc>;
+ interrupts = <24>, <4>;
+ status = "disabled";
+ };
+
+ sata: sata@181000 {
+ compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+ reg-names = "ahci", "top-ctrl";
+ reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <45>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy1>;
+ };
+ };
+
+ sata_phy: sata-phy@180100 {
+ compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+ reg = <0x180100 0x0eff>;
+ reg-names = "phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sata_phy0: sata-phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ sata_phy1: sata-phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ sdhci0: sdhci@41a000 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x41a000 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <47>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@41a200 {
+ compatible = "brcm,bcm7425-sdhci";
+ reg = <0x41a200 0x100>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <48>;
+ sd-uhs-sdr50;
+ mmc-hs200-1_8v;
+ status = "disabled";
+ };
+
+ spi_l2_intc: interrupt-controller@41bd00 {
+ compatible = "brcm,l2-intc";
+ reg = <0x41bd00 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <25>;
+ };
+
+ qspi: spi@41d200 {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-qspi";
+ clocks = <&upg_clk>;
+ reg = <0x41a920 0x4 0x41d400 0x188 0x41d200 0x50>;
+ reg-names = "cs_reg", "hif_mspi", "bspi";
+ interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>;
+ interrupt-parent = <&spi_l2_intc>;
+ interrupt-names = "spi_lr_fullness_reached",
+ "spi_lr_session_aborted",
+ "spi_lr_impatient",
+ "spi_lr_session_done",
+ "spi_lr_overread",
+ "mspi_done",
+ "mspi_halted";
+ status = "disabled";
+ };
+
+ mspi: spi@409200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,spi-bcm-qspi",
+ "brcm,spi-brcmstb-mspi";
+ clocks = <&upg_clk>;
+ reg = <0x409200 0x180>;
+ reg-names = "mspi";
+ interrupts = <0x14>;
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ interrupt-names = "mspi_done";
+ status = "disabled";
+ };
+
+ waketimer: waketimer@409580 {
+ compatible = "brcm,brcmstb-waketimer";
+ reg = <0x409580 0x14>;
+ interrupts = <0x3>;
+ interrupt-parent = <&aon_pm_l2_intc>;
+ interrupt-names = "timer";
+ clocks = <&upg_clk>;
+ status = "disabled";
+ };
+ };
+
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x103b0000 0x1a000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory-controller@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x0 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+
+ memory-controller@1 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges = <0x0 0x10000 0xa000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc-arb@1000 {
+ compatible = "brcm,brcmstb-memc-arb";
+ reg = <0x1000 0x248>;
+ };
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x300>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy";
+ reg = <0x6000 0xc8>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy";
+ reg = <0x8000 0x13c>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg.dts b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
new file mode 100644
index 000000000..601e4d929
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm3384_zephyr.dtsi"
+
+/ {
+ compatible = "brcm,bcm93384wvg", "brcm,bcm3384";
+ model = "Broadcom BCM93384WVG";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
new file mode 100644
index 000000000..938a8e661
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm3384_viper.dtsi"
+
+/ {
+ compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper";
+ model = "Broadcom BCM93384WVG-viper";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
new file mode 100644
index 000000000..6d772c394
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6368.dtsi"
+
+/ {
+ compatible = "brcm,bcm96368mvwg", "brcm,bcm6368";
+ model = "Broadcom BCM96368MVWG";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* FIXME: need to set up USB_CTRL registers first */
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
new file mode 100644
index 000000000..79e9769f7
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7125.dtsi"
+
+/ {
+ compatible = "brcm,bcm97125cbmb", "brcm,bcm7125";
+ model = "Broadcom BCM97125CBMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+/* FIXME: USB is wonky; disable it for now */
+&ehci0 {
+ status = "disabled";
+};
+
+&ohci0 {
+ status = "disabled";
+};
+
+&mspi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
new file mode 100644
index 000000000..28370ff77
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7346.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+
+/ {
+ compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346";
+ model = "Broadcom BCM97346DBSMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&mspi {
+ status = "okay";
+};
+
+&waketimer {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
new file mode 100644
index 000000000..41c1b510c
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7358.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+
+/ {
+ compatible = "brcm,bcm97358svmb", "brcm,bcm7358";
+ model = "Broadcom BCM97358SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-cpol;
+ spi-cpha;
+ use-bspi;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash0.cfe@0 {
+ reg = <0x0 0x200000>;
+ };
+
+ flash0.mac@200000 {
+ reg = <0x200000 0x40000>;
+ };
+
+ flash0.nvram@240000 {
+ reg = <0x240000 0x10000>;
+ };
+ };
+ };
+};
+
+&mspi {
+ status = "okay";
+};
+
+&waketimer {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
new file mode 100644
index 000000000..9f6c6c9b7
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7360.dtsi"
+
+/ {
+ compatible = "brcm,bcm97360svmb", "brcm,bcm7360";
+ model = "Broadcom BCM97360SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-cpol;
+ spi-cpha;
+ use-bspi;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash0.cfe@0 {
+ reg = <0x0 0x200000>;
+ };
+
+ flash0.mac@200000 {
+ reg = <0x200000 0x40000>;
+ };
+
+ flash0.nvram@240000 {
+ reg = <0x240000 0x10000>;
+ };
+ };
+ };
+};
+
+&mspi {
+ status = "okay";
+};
+
+&waketimer {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
new file mode 100644
index 000000000..df8b755c3
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7362.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch4.dtsi"
+
+/ {
+ compatible = "brcm,bcm97362svmb", "brcm,bcm7362";
+ model = "Broadcom BCM97362SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&mspi {
+ status = "okay";
+};
+
+&waketimer {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts
new file mode 100644
index 000000000..086faeaa3
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97420c.dts
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7420.dtsi"
+
+/ {
+ compatible = "brcm,bcm97420c", "brcm,bcm7420";
+ model = "Broadcom BCM97420C";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>,
+ <0x20000000 0x30000000>,
+ <0x60000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+/* FIXME: MAC driver comes up but cannot attach to PHY */
+&enet0 {
+ status = "disabled";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&mspi {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
new file mode 100644
index 000000000..0ed22217b
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7425.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+
+/ {
+ compatible = "brcm,bcm97425svmb", "brcm,bcm7425";
+ model = "Broadcom BCM97425SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>,
+ <0x20000000 0x30000000>,
+ <0x90000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "m25p80";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-cpol;
+ spi-cpha;
+ use-bspi;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash0.cfe@0 {
+ reg = <0x0 0x200000>;
+ };
+
+ flash0.mac@200000 {
+ reg = <0x200000 0x40000>;
+ };
+
+ flash0.nvram@240000 {
+ reg = <0x240000 0x10000>;
+ };
+ };
+ };
+};
+
+&mspi {
+ status = "okay";
+};
+
+&waketimer {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97435svmb.dts b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
new file mode 100644
index 000000000..2c145a883
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97435svmb.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm7435.dtsi"
+/include/ "bcm97xxx-nand-cs1-bch24.dtsi"
+
+/ {
+ compatible = "brcm,bcm97435svmb", "brcm,bcm7435";
+ model = "Broadcom BCM97435SVMB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>,
+ <0x20000000 0x30000000>,
+ <0x90000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
+&pwma {
+ status = "okay";
+};
+
+&pwmb {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&enet0 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+&ehci3 {
+ status = "okay";
+};
+
+&ohci3 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&sdhci1 {
+ status = "okay";
+};
+
+&mspi {
+ status = "okay";
+};
+
+&waketimer {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
new file mode 100644
index 000000000..96c30d857
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch24.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <1>;
+ nand-on-flash-bbt;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+ brcm,nand-oob-sector-size = <27>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1.rootfs@0 {
+ reg = <0x0 0x10000000>;
+ };
+
+ flash1.kernel@10000000 {
+ reg = <0x10000000 0x400000>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
new file mode 100644
index 000000000..7b5afefbb
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm97xxx-nand-cs1-bch4.dtsi
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <1>;
+ nand-on-flash-bbt;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ brcm,nand-oob-sector-size = <16>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1.rootfs@0 {
+ reg = <0x0 0x10000000>;
+ };
+
+ flash1.kernel@10000000 {
+ reg = <0x10000000 0x400000>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
new file mode 100644
index 000000000..8d58c1971
--- /dev/null
+++ b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "bcm6328.dtsi"
+
+/ {
+ compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328";
+ model = "Broadcom BCM9EJTAGPRB";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
new file mode 100644
index 000000000..17aef35f3
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
new file mode 100644
index 000000000..2fdb4baad
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-1000n.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for D-Link DSR-1000N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "dlink,dsr-1000n";
+
+ soc@0 {
+ uart0: serial@1180000000800 {
+ clock-frequency = <500000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb1 {
+ label = "usb1";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "usb2";
+ gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless1 {
+ label = "5g";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless2 {
+ label = "2.4g";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
new file mode 100644
index 000000000..b4acdb26a
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n-1000n.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for D-Link DSR-500N/1000N (common parts).
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+ soc@0 {
+ smi0: mdio@1180000001800 {
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+
+ pip: pip@11800a0000000 {
+ interface@0 {
+ ethernet@0 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ ethernet@1 {
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ ethernet@2 {
+ phy-handle = <&phy8>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ };
+
+ usbn: usbn@1180068000000 {
+ refclk-frequency = <12000000>;
+ refclk-type = "crystal";
+ };
+ };
+
+ aliases {
+ pip = &pip;
+ };
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
new file mode 100644
index 000000000..e04237281
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/dlink_dsr-500n.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for D-Link DSR-500N.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "dlink_dsr-500n-1000n.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "dlink,dsr-500n";
+ compatible = "dlink,dsr-500n", "cavium,octeon-3860";
+
+ soc@0 {
+ uart0: serial@1180000000800 {
+ clock-frequency = <300000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless {
+ label = "2.4g";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
new file mode 100644
index 000000000..dda0559ce
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OCTEON 3XXX, 5XXX, 63XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use. Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+ soc@0 {
+ smi0: mdio@1180000001800 {
+ phy0: ethernet-phy@0 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy9: ethernet-phy@9 {
+ reg = <9>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi1: mdio@1180000001900 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001900 0x0 0x40>;
+
+ phy100: ethernet-phy@1 {
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy101: ethernet-phy@2 {
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy102: ethernet-phy@3 {
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ phy103: ethernet-phy@4 {
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ interrupt-parent = <&gpio>;
+ interrupts = <12 8>; /* Pin 12, active low */
+ };
+ };
+
+ mix0: ethernet@1070000100000 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <0>;
+ interrupts = <0 62>, <1 46>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy0>;
+ };
+
+ mix1: ethernet@1070000100800 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000800 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <1>;
+ interrupts = <1 18>, < 1 46>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy1>;
+ };
+
+ pip: pip@11800a0000000 {
+ interface@0 {
+ ethernet@0 {
+ phy-handle = <&phy2>;
+ cavium,alt-phy-handle = <&phy100>;
+ rx-delay = <0>;
+ tx-delay = <0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ ethernet@1 {
+ phy-handle = <&phy3>;
+ cavium,alt-phy-handle = <&phy101>;
+ rx-delay = <0>;
+ tx-delay = <0>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ ethernet@2 {
+ phy-handle = <&phy4>;
+ cavium,alt-phy-handle = <&phy102>;
+ rx-delay = <0>;
+ tx-delay = <0>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy5>;
+ cavium,alt-phy-handle = <&phy103>;
+ };
+ ethernet@4 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x4>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@5 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x5>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@6 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x6>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@7 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x7>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@8 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x8>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@9 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x9>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@a {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xa>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@b {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xb>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@c {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xc>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@d {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xd>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@e {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xe>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@f {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0xf>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ interface@1 {
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy6>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy7>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy8>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy9>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
+
+ twsi1: i2c@1180000001200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001200 0x0 0x200>;
+ interrupts = <0 59>;
+ clock-frequency = <100000>;
+ };
+
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <0 35>;
+ };
+
+ uart2: serial@1180000000400 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000400 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <1 16>;
+ };
+
+ bootbus: bootbus@1180000000000 {
+ led0: led-display@4,0 {
+ compatible = "avago,hdsp-253x";
+ reg = <4 0x20 0x20>, <4 0 0x20>;
+ };
+
+ cf0: compact-flash@5,0 {
+ compatible = "cavium,ebt3000-compact-flash";
+ reg = <5 0 0x10000>, <6 0 0x10000>;
+ cavium,bus-width = <16>;
+ cavium,true-ide;
+ cavium,dma-engine-handle = <&dma0>;
+ };
+ };
+
+ uctl: uctl@118006f000000 {
+ compatible = "cavium,octeon-6335-uctl";
+ reg = <0x11800 0x6f000000 0x0 0x100>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ ehci@16f0000000000 {
+ compatible = "cavium,octeon-6335-ehci","usb-ehci";
+ reg = <0x16f00 0x00000000 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ ohci@16f0000000400 {
+ compatible = "cavium,octeon-6335-ohci","usb-ohci";
+ reg = <0x16f00 0x00000400 0x0 0x100>;
+ interrupts = <0 56>;
+ big-endian-regs;
+ };
+ };
+
+ usbn: usbn@1180068000000 {
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+ };
+ };
+
+ aliases {
+ mix0 = &mix0;
+ mix1 = &mix1;
+ pip = &pip;
+ smi0 = &smi0;
+ smi1 = &smi1;
+ twsi0 = &twsi0;
+ twsi1 = &twsi1;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ flash0 = &flash0;
+ cf0 = &cf0;
+ uctl = &uctl;
+ usbn = &usbn;
+ led0 = &led0;
+ };
+ };
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi
new file mode 100644
index 000000000..3c296623d
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dtsi
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+/* OCTEON 3XXX DTS common parts. */
+
+/dts-v1/;
+
+/ {
+ compatible = "cavium,octeon-3860";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&ciu>;
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges; /* Direct mapping */
+
+ ciu: interrupt-controller@1070000000000 {
+ compatible = "cavium,octeon-3860-ciu";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 1)
+ * 2) Bit within the register (0..63)
+ */
+ #interrupt-cells = <2>;
+ reg = <0x10700 0x00000000 0x0 0x7000>;
+ };
+
+ gpio: gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pin connect to 16 consecutive CUI bits */
+ interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+ <0 20>, <0 21>, <0 22>, <0 23>,
+ <0 24>, <0 25>, <0 26>, <0 27>,
+ <0 28>, <0 29>, <0 30>, <0 31>;
+ };
+
+ smi0: mdio@1180000001800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00001800 0x0 0x40>;
+ };
+
+ pip: pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@0 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ interface@1 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>; /* interface */
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <0 45>;
+ clock-frequency = <100000>;
+ };
+
+ uart0: serial@1180000000800 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000800 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <0 34>;
+ };
+
+ bootbus: bootbus@1180000000000 {
+ compatible = "cavium,octeon-3860-bootbus";
+ reg = <0x11800 0x00000000 0x0 0x200>;
+ /* The chip select number and offset */
+ #address-cells = <2>;
+ /* The size of the chip select region */
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x1f400000 0xc00000>,
+ <1 0 0x10000 0x30000000 0>,
+ <2 0 0x10000 0x40000000 0>,
+ <3 0 0x10000 0x50000000 0>,
+ <4 0 0x0 0x1d020000 0x10000>,
+ <5 0 0x0 0x1d040000 0x10000>,
+ <6 0 0x0 0x1d050000 0x10000>,
+ <7 0 0x10000 0x90000000 0>;
+
+ cavium,cs-config@0 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <0>;
+ cavium,t-adr = <20>;
+ cavium,t-ce = <60>;
+ cavium,t-oe = <60>;
+ cavium,t-we = <45>;
+ cavium,t-rd-hld = <35>;
+ cavium,t-wr-hld = <45>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <35>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@4 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <4>;
+ cavium,t-adr = <320>;
+ cavium,t-ce = <320>;
+ cavium,t-oe = <320>;
+ cavium,t-we = <320>;
+ cavium,t-rd-hld = <320>;
+ cavium,t-wr-hld = <320>;
+ cavium,t-pause = <320>;
+ cavium,t-wait = <320>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@5 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <5>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <30>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <30>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <16>;
+ };
+ cavium,cs-config@6 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <6>;
+ cavium,t-adr = <5>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <270>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <70>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <0>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,wait-mode;
+ cavium,bus-width = <16>;
+ };
+
+ flash0: nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ dma0: dma-engine@1180000000100 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000100 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+
+ dma1: dma-engine@1180000000108 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000108 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+
+ usbn: usbn@1180068000000 {
+ compatible = "cavium,octeon-5750-usbn";
+ reg = <0x11800 0x68000000 0x0 0x1000>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ usbc@16f0010000000 {
+ compatible = "cavium,octeon-5750-usbc";
+ reg = <0x16f00 0x10000000 0x0 0x80000>;
+ interrupts = <0 56>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
new file mode 100644
index 000000000..3d0acbb2e
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/*
+ * OCTEON 68XX device tree skeleton.
+ *
+ * This device tree is pruned and patched by early boot code before
+ * use. Because of this, it contains a super-set of the available
+ * devices and properties.
+ */
+/ {
+ compatible = "cavium,octeon-6880";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&ciu2>;
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges; /* Direct mapping */
+
+ ciu2: interrupt-controller@1070100000000 {
+ compatible = "cavium,octeon-6880-ciu2";
+ interrupt-controller;
+ /* Interrupts are specified by two parts:
+ * 1) Controller register (0 or 7)
+ * 2) Bit within the register (0..63)
+ */
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x10701 0x00000000 0x0 0x4000000>;
+ };
+
+ gpio: gpio-controller@1070000000800 {
+ #gpio-cells = <2>;
+ compatible = "cavium,octeon-3860-gpio";
+ reg = <0x10700 0x00000800 0x0 0x100>;
+ gpio-controller;
+ /* Interrupts are specified by two parts:
+ * 1) GPIO pin number (0..15)
+ * 2) Triggering (1 - edge rising
+ * 2 - edge falling
+ * 4 - level active high
+ * 8 - level active low)
+ */
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* The GPIO pins connect to 16 consecutive CUI bits */
+ interrupts = <7 0>, <7 1>, <7 2>, <7 3>,
+ <7 4>, <7 5>, <7 6>, <7 7>,
+ <7 8>, <7 9>, <7 10>, <7 11>,
+ <7 12>, <7 13>, <7 14>, <7 15>;
+ };
+
+ smi0: mdio@1180000003800 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003800 0x0 0x40>;
+
+ phy0: ethernet-phy@6 {
+ compatible = "marvell,88e1118";
+ marvell,reg-init =
+ /* Fix rx and tx clock transition timing */
+ <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */
+ /* Adjust LED drive. */
+ <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */
+ /* irq, blink-activity, blink-link */
+ <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */
+ reg = <6>;
+ };
+
+ phy1: ethernet-phy@1 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy2: ethernet-phy@2 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy3: ethernet-phy@3 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy4: ethernet-phy@4 {
+ cavium,qlm-trim = "4,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi1: mdio@1180000003880 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003880 0x0 0x40>;
+
+ phy41: ethernet-phy@1 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy42: ethernet-phy@2 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy43: ethernet-phy@3 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy44: ethernet-phy@4 {
+ cavium,qlm-trim = "0,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi2: mdio@1180000003900 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003900 0x0 0x40>;
+
+ phy21: ethernet-phy@1 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy22: ethernet-phy@2 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy23: ethernet-phy@3 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy24: ethernet-phy@4 {
+ cavium,qlm-trim = "2,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ smi3: mdio@1180000003980 {
+ compatible = "cavium,octeon-3860-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0x00003980 0x0 0x40>;
+
+ phy11: ethernet-phy@1 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <1>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy12: ethernet-phy@2 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <2>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy13: ethernet-phy@3 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <3>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ phy14: ethernet-phy@4 {
+ cavium,qlm-trim = "3,sgmii";
+ reg = <4>;
+ compatible = "marvell,88e1149r";
+ marvell,reg-init = <3 0x10 0 0x5777>,
+ <3 0x11 0 0x00aa>,
+ <3 0x12 0 0x4105>,
+ <3 0x13 0 0x0a60>;
+ };
+ };
+
+ mix0: ethernet@1070000100000 {
+ compatible = "cavium,octeon-5750-mix";
+ reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */
+ <0x11800 0xE0000000 0x0 0x300>, /* AGL */
+ <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */
+ <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */
+ cell-index = <0>;
+ interrupts = <6 40>, <6 32>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy0>;
+ };
+
+ pip: pip@11800a0000000 {
+ compatible = "cavium,octeon-3860-pip";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11800 0xa0000000 0x0 0x2000>;
+
+ interface@4 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy1>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy2>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy3>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy4>;
+ };
+ };
+
+ interface@3 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy11>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy12>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy13>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy14>;
+ };
+ };
+
+ interface@2 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy21>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy22>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy23>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy24>;
+ };
+ };
+
+ interface@1 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ interface@0 {
+ compatible = "cavium,octeon-3860-pip-interface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>; /* interface */
+
+ ethernet@0 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x0>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy41>;
+ };
+ ethernet@1 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x1>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy42>;
+ };
+ ethernet@2 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x2>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy43>;
+ };
+ ethernet@3 {
+ compatible = "cavium,octeon-3860-pip-port";
+ reg = <0x3>; /* Port */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-handle = <&phy44>;
+ };
+ };
+ };
+
+ twsi0: i2c@1180000001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001000 0x0 0x200>;
+ interrupts = <3 32>;
+ clock-frequency = <100000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
+ tmp@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+ };
+
+ twsi1: i2c@1180000001200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,octeon-3860-twsi";
+ reg = <0x11800 0x00001200 0x0 0x200>;
+ interrupts = <3 33>;
+ clock-frequency = <100000>;
+ };
+
+ uart0: serial@1180000000800 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000800 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <3 36>;
+ };
+
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg-shift = <3>;
+ interrupts = <3 37>;
+ };
+
+ bootbus: bootbus@1180000000000 {
+ compatible = "cavium,octeon-3860-bootbus";
+ reg = <0x11800 0x00000000 0x0 0x200>;
+ /* The chip select number and offset */
+ #address-cells = <2>;
+ /* The size of the chip select region */
+ #size-cells = <1>;
+ ranges = <0 0 0 0x1f400000 0xc00000>,
+ <1 0 0x10000 0x30000000 0>,
+ <2 0 0x10000 0x40000000 0>,
+ <3 0 0x10000 0x50000000 0>,
+ <4 0 0 0x1d020000 0x10000>,
+ <5 0 0 0x1d040000 0x10000>,
+ <6 0 0 0x1d050000 0x10000>,
+ <7 0 0x10000 0x90000000 0>;
+
+ cavium,cs-config@0 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <0>;
+ cavium,t-adr = <10>;
+ cavium,t-ce = <50>;
+ cavium,t-oe = <50>;
+ cavium,t-we = <35>;
+ cavium,t-rd-hld = <25>;
+ cavium,t-wr-hld = <35>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <300>;
+ cavium,t-page = <25>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@4 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <4>;
+ cavium,t-adr = <320>;
+ cavium,t-ce = <320>;
+ cavium,t-oe = <320>;
+ cavium,t-we = <320>;
+ cavium,t-rd-hld = <320>;
+ cavium,t-wr-hld = <320>;
+ cavium,t-pause = <320>;
+ cavium,t-wait = <320>;
+ cavium,t-page = <320>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <8>;
+ };
+ cavium,cs-config@5 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <5>;
+ cavium,t-adr = <0>;
+ cavium,t-ce = <300>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <300>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <300>;
+ cavium,t-page = <310>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,bus-width = <16>;
+ };
+ cavium,cs-config@6 {
+ compatible = "cavium,octeon-3860-bootbus-config";
+ cavium,cs-index = <6>;
+ cavium,t-adr = <0>;
+ cavium,t-ce = <30>;
+ cavium,t-oe = <125>;
+ cavium,t-we = <150>;
+ cavium,t-rd-hld = <100>;
+ cavium,t-wr-hld = <30>;
+ cavium,t-pause = <0>;
+ cavium,t-wait = <30>;
+ cavium,t-page = <310>;
+ cavium,t-rd-dly = <0>;
+
+ cavium,pages = <0>;
+ cavium,wait-mode;
+ cavium,bus-width = <16>;
+ };
+
+ flash0: nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0 0x200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x200000>;
+ };
+ partition@400000 {
+ label = "cramfs";
+ reg = <0x400000 0x3fe000>;
+ };
+ partition@7fe000 {
+ label = "environment";
+ reg = <0x7fe000 0x2000>;
+ read-only;
+ };
+ };
+
+ led0: led-display@4,0 {
+ compatible = "avago,hdsp-253x";
+ reg = <4 0x20 0x20>, <4 0 0x20>;
+ };
+
+ compact-flash@5,0 {
+ compatible = "cavium,ebt3000-compact-flash";
+ reg = <5 0 0x10000>, <6 0 0x10000>;
+ cavium,bus-width = <16>;
+ cavium,true-ide;
+ cavium,dma-engine-handle = <&dma0>;
+ };
+ };
+
+ dma0: dma-engine@1180000000100 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000100 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+ dma1: dma-engine@1180000000108 {
+ compatible = "cavium,octeon-5750-bootbus-dma";
+ reg = <0x11800 0x00000108 0x0 0x8>;
+ interrupts = <0 63>;
+ };
+
+ uctl: uctl@118006f000000 {
+ compatible = "cavium,octeon-6335-uctl";
+ reg = <0x11800 0x6f000000 0x0 0x100>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ /* 12MHz, 24MHz and 48MHz allowed */
+ refclk-frequency = <12000000>;
+ /* Either "crystal" or "external" */
+ refclk-type = "crystal";
+
+ ehci@16f0000000000 {
+ compatible = "cavium,octeon-6335-ehci","usb-ehci";
+ reg = <0x16f00 0x00000000 0x0 0x100>;
+ interrupts = <3 44>;
+ big-endian-regs;
+ };
+ ohci@16f0000000400 {
+ compatible = "cavium,octeon-6335-ohci","usb-ohci";
+ reg = <0x16f00 0x00000400 0x0 0x100>;
+ interrupts = <3 44>;
+ big-endian-regs;
+ };
+ };
+ };
+
+ aliases {
+ mix0 = &mix0;
+ pip = &pip;
+ smi0 = &smi0;
+ smi1 = &smi1;
+ smi2 = &smi2;
+ smi3 = &smi3;
+ twsi0 = &twsi0;
+ twsi1 = &twsi1;
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uctl = &uctl;
+ led0 = &led0;
+ flash0 = &flash0;
+ };
+ };
diff --git a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
new file mode 100644
index 000000000..cb219b730
--- /dev/null
+++ b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree source for EdgeRouter Lite.
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ */
+
+/include/ "octeon_3xxx.dtsi"
+
+/ {
+ model = "ubnt,e100";
+
+ soc@0 {
+ smi0: mdio@1180000001800 {
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+
+ pip: pip@11800a0000000 {
+ interface@0 {
+ ethernet@0 {
+ phy-handle = <&phy7>;
+ rx-delay = <0>;
+ tx-delay = <0x10>;
+ };
+ ethernet@1 {
+ phy-handle = <&phy6>;
+ rx-delay = <0>;
+ tx-delay = <0x10>;
+ };
+ ethernet@2 {
+ phy-handle = <&phy5>;
+ rx-delay = <0>;
+ tx-delay = <0x10>;
+ };
+ };
+ };
+
+ uart0: serial@1180000000800 {
+ clock-frequency = <500000000>;
+ };
+
+ usbn: usbn@1180068000000 {
+ refclk-frequency = <12000000>;
+ refclk-type = "crystal";
+ };
+ };
+
+ aliases {
+ pip = &pip;
+ };
+};
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 000000000..441a3c16e
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb
+
+dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
+obj-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb.o
diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts
new file mode 100644
index 000000000..84328afa3
--- /dev/null
+++ b/arch/mips/boot/dts/img/boston.dts
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/clock/boston-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,boston";
+
+ chosen {
+ stdout-path = "uart0:115200";
+ };
+
+ aliases {
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "img,mips";
+ reg = <0>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ pci0: pci@10000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x10000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x40000000
+ 0x40000000 0 0x40000000>;
+
+ bus-range = <0x00 0xff>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci0_intc 1>,
+ <0 0 0 2 &pci0_intc 2>,
+ <0 0 0 3 &pci0_intc 3>,
+ <0 0 0 4 &pci0_intc 4>;
+
+ pci0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci1: pci@12000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x12000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x20000000
+ 0x20000000 0 0x20000000>;
+
+ bus-range = <0x00 0xff>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci1_intc 1>,
+ <0 0 0 2 &pci1_intc 2>,
+ <0 0 0 3 &pci1_intc 3>,
+ <0 0 0 4 &pci1_intc 4>;
+
+ pci1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pci2: pci@14000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ device_type = "pci";
+ reg = <0x14000000 0x2000000>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>;
+
+ ranges = <0x02000000 0 0x16000000
+ 0x16000000 0 0x100000>;
+
+ bus-range = <0x00 0xff>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pci2_intc 1>,
+ <0 0 0 2 &pci2_intc 2>,
+ <0 0 0 3 &pci2_intc 3>,
+ <0 0 0 4 &pci2_intc 4>;
+
+ pci2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pci2_root@0,0,0 {
+ compatible = "pci10ee,7021";
+ reg = <0x00000000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_bridge@1,0,0 {
+ compatible = "pci8086,8800";
+ reg = <0x00010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ eg20t_phub@2,0,0 {
+ compatible = "pci8086,8801";
+ reg = <0x00020000 0 0 0 0>;
+ intel,eg20t-prefetch = <0>;
+ };
+
+ eg20t_mac@2,0,1 {
+ compatible = "pci8086,8802";
+ reg = <0x00020100 0 0 0 0>;
+ phy-reset-gpios = <&eg20t_gpio 6
+ GPIO_ACTIVE_LOW>;
+ };
+
+ eg20t_gpio: eg20t_gpio@2,0,2 {
+ compatible = "pci8086,8803";
+ reg = <0x00020200 0 0 0 0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ eg20t_i2c@2,12,2 {
+ compatible = "pci8086,8817";
+ reg = <0x00026200 0 0 0 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc@68 {
+ compatible = "st,m41t81s";
+ reg = <0x68>;
+ };
+ };
+ };
+ };
+ };
+
+ gic: interrupt-controller@16120000 {
+ compatible = "mti,gic";
+ reg = <0x16120000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_boston BOSTON_CLK_CPU>;
+ };
+ };
+
+ cdmm@16140000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x16140000 0x8000>;
+ };
+
+ cpc@16200000 {
+ compatible = "mti,mips-cpc";
+ reg = <0x16200000 0x8000>;
+ };
+
+ plat_regs: system-controller@17ffd000 {
+ compatible = "img,boston-platform-regs", "syscon";
+ reg = <0x17ffd000 0x1000>;
+
+ clk_boston: clock {
+ compatible = "img,boston-clock";
+ #clock-cells = <1>;
+ };
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x10>;
+ mask = <0x10>;
+ };
+
+ uart0: uart@17ffe000 {
+ compatible = "ns16550a";
+ reg = <0x17ffe000 0x1000>;
+ reg-shift = <2>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&clk_boston BOSTON_CLK_SYS>;
+ };
+
+ lcd: lcd@17fff000 {
+ compatible = "img,boston-lcd";
+ reg = <0x17fff000 0x8>;
+ };
+};
diff --git a/arch/mips/boot/dts/img/pistachio.dtsi b/arch/mips/boot/dts/img/pistachio.dtsi
new file mode 100644
index 000000000..dc3b7909d
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio.dtsi
@@ -0,0 +1,920 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ * Copyright (C) 2015 Google, Inc.
+ */
+
+#include <dt-bindings/clock/pistachio-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/reset/pistachio-resets.h>
+
+/ {
+ compatible = "img,pistachio";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,interaptiv";
+ reg = <0>;
+ clocks = <&clk_core CLK_MIPS_PLL>;
+ clock-names = "cpu";
+ clock-latency = <1000>;
+ operating-points = <
+ /* kHz uV(dummy) */
+ 546000 1150000
+ 520000 1100000
+ 494000 1000000
+ 468000 950000
+ 442000 900000
+ 416000 800000
+ >;
+ };
+ };
+
+ i2c0: i2c@18100000 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100000 0x200>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C0>,
+ <&cr_periph SYS_CLK_I2C0>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C0_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C0_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@18100200 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100200 0x200>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C1>,
+ <&cr_periph SYS_CLK_I2C1>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C1_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C1_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@18100400 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100400 0x200>;
+ interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C2>,
+ <&cr_periph SYS_CLK_I2C2>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C2_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C2_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@18100600 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100600 0x200>;
+ interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C3>,
+ <&cr_periph SYS_CLK_I2C3>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C3_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C3_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2s_in: i2s-in@18100800 {
+ compatible = "img,i2s-in";
+ reg = <0x18100800 0x200>;
+ interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 30 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_I2S_IN>;
+ clock-names = "sys";
+ img,i2s-channels = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_in_pins>;
+ status = "disabled";
+
+ #sound-dai-cells = <0>;
+ };
+
+ i2s_out: i2s-out@18100a00 {
+ compatible = "img,i2s-out";
+ reg = <0x18100a00 0x200>;
+ interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 23 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+ <&clk_core CLK_I2S>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_I2S_DIV>;
+ assigned-clock-rates = <12288000>;
+ img,i2s-channels = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_out_pins>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ parallel_out: parallel-audio-out@18100c00 {
+ compatible = "img,parallel-out";
+ reg = <0x18100c00 0x100>;
+ interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 16 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+ <&clk_core CLK_AUDIO_DAC>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_AUDIO_DAC_DIV>;
+ assigned-clock-rates = <12288000>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_out: spdif-out@18100d00 {
+ compatible = "img,spdif-out";
+ reg = <0x18100d00 0x100>;
+ interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 14 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+ <&clk_core CLK_SPDIF>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_SPDIF_DIV>;
+ assigned-clock-rates = <12288000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_out_pin>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in@18100e00 {
+ compatible = "img,spdif-in";
+ reg = <0x18100e00 0x100>;
+ interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 15 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+ clock-names = "sys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_in_pin>;
+ status = "disabled";
+
+ #sound-dai-cells = <0>;
+ };
+
+ internal_dac: internal-dac {
+ compatible = "img,pistachio-internal-dac";
+ img,cr-top = <&cr_top>;
+ img,voltage-select = <1>;
+
+ #sound-dai-cells = <0>;
+ };
+
+ spfi0: spi@18100f00 {
+ compatible = "img,spfi";
+ reg = <0x18100f00 0x100>;
+ interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SPI0>, <&cr_periph SYS_CLK_SPI0_MASTER>;
+ clock-names = "sys", "spfi";
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ spfi-max-frequency = <50000000>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spfi1: spi@18101000 {
+ compatible = "img,spfi";
+ reg = <0x18101000 0x100>;
+ interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SPI1>, <&cr_periph SYS_CLK_SPI1>;
+ clock-names = "sys", "spfi";
+ dmas = <&mdc 1 0xffffffff 0>, <&mdc 2 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ img,supports-quad-mode;
+ spfi-max-frequency = <50000000>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pwm: pwm@18101300 {
+ compatible = "img,pistachio-pwm";
+ reg = <0x18101300 0x100>;
+ clocks = <&clk_periph PERIPH_CLK_PWM>,
+ <&cr_periph SYS_CLK_PWM>;
+ clock-names = "pwm", "sys";
+ img,cr-periph = <&cr_periph>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ uart0: uart@18101400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18101400 0x100>;
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_UART0>, <&cr_periph SYS_CLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ assigned-clocks = <&clk_core CLK_UART0_INTERNAL_DIV>,
+ <&clk_core CLK_UART0_DIV>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-0 = <&uart0_pins>, <&uart0_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ uart1: uart@18101500 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18101500 0x100>;
+ interrupts = <GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_UART1>, <&cr_periph SYS_CLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ assigned-clocks = <&clk_core CLK_UART1_INTERNAL_DIV>,
+ <&clk_core CLK_UART1_DIV>;
+ assigned-clock-rates = <114278400>, <1843200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ adc: adc@18101600 {
+ compatible = "cosmic,10001-adc";
+ reg = <0x18101600 0x24>;
+ adc-reserved-channels = <0x30>;
+ clocks = <&clk_core CLK_AUX_ADC>;
+ clock-names = "adc";
+ assigned-clocks = <&clk_core CLK_AUX_ADC_INTERNAL_DIV>,
+ <&clk_core CLK_AUX_ADC_DIV>;
+ assigned-clock-rates = <100000000>, <1000000>;
+ status = "disabled";
+
+ #io-channel-cells = <1>;
+ };
+
+ pinctrl: pinctrl@18101c00 {
+ compatible = "img,pistachio-system-pinctrl";
+ reg = <0x18101c00 0x400>;
+
+ gpio0: gpio0 {
+ interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 {
+ interrupts = <GIC_SHARED 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 {
+ interrupts = <GIC_SHARED 73 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3 {
+ interrupts = <GIC_SHARED 74 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio4 {
+ interrupts = <GIC_SHARED 75 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio5 {
+ interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 80 10>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pin_i2c0: i2c0 {
+ pins = "mfio28", "mfio29";
+ function = "i2c0";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pin_i2c1: i2c1 {
+ pins = "mfio30", "mfio31";
+ function = "i2c1";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pin_i2c2: i2c2 {
+ pins = "mfio32", "mfio33";
+ function = "i2c2";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c3_pins: i2c3-pins {
+ pin_i2c3: i2c3 {
+ pins = "mfio34", "mfio35";
+ function = "i2c3";
+ drive-strength = <4>;
+ };
+ };
+
+ spim0_pins: spim0-pins {
+ pin_spim0: spim0 {
+ pins = "mfio9", "mfio10";
+ function = "spim0";
+ drive-strength = <4>;
+ };
+ spim0_clk: spim0-clk {
+ pins = "mfio8";
+ function = "spim0";
+ drive-strength = <4>;
+ };
+ };
+
+ spim0_cs0_alt_pin: spim0-cs0-alt-pin {
+ spim0-cs0 {
+ pins = "mfio2";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs1_pin: spim0-cs1-pin {
+ spim0-cs1 {
+ pins = "mfio1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs2_pin: spim0-cs2-pin {
+ spim0-cs2 {
+ pins = "mfio55";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs2_alt_pin: spim0-cs2-alt-pin {
+ spim0-cs2 {
+ pins = "mfio28";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs3_pin: spim0-cs3-pin {
+ spim0-cs3 {
+ pins = "mfio56";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs3_alt_pin: spim0-cs3-alt-pin {
+ spim0-cs3 {
+ pins = "mfio29";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs4_pin: spim0-cs4-pin {
+ spim0-cs4 {
+ pins = "mfio57";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs4_alt_pin: spim0-cs4-alt-pin {
+ spim0-cs4 {
+ pins = "mfio30";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_pins: spim1-pins {
+ spim1 {
+ pins = "mfio3", "mfio4", "mfio5";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_quad_pins: spim1-quad-pins {
+ spim1-quad {
+ pins = "mfio6", "mfio7";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs0_pin: spim1-cs0-pins {
+ spim1-cs0 {
+ pins = "mfio0";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs1_pin: spim1-cs1-pin {
+ spim1-cs1 {
+ pins = "mfio1";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs1_alt_pin: spim1-cs1-alt-pin {
+ spim1-cs1 {
+ pins = "mfio58";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_pin: spim1-cs2-pin {
+ spim1-cs2 {
+ pins = "mfio2";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_alt0_pin: spim1-cs2-alt0-pin {
+ spim1-cs2 {
+ pins = "mfio31";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_alt1_pin: spim1-cs2-alt1-pin {
+ spim1-cs2 {
+ pins = "mfio55";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs3_pin: spim1-cs3-pin {
+ spim1-cs3 {
+ pins = "mfio56";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs4_pin: spim1-cs4-pin {
+ spim1-cs4 {
+ pins = "mfio57";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0 {
+ pins = "mfio55", "mfio56";
+ function = "uart0";
+ drive-strength = <2>;
+ };
+ };
+
+ uart0_rts_cts_pins: uart0-rts-cts-pins {
+ uart0-rts-cts {
+ pins = "mfio57", "mfio58";
+ function = "uart0";
+ drive-strength = <2>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ uart1 {
+ pins = "mfio59", "mfio60";
+ function = "uart1";
+ drive-strength = <2>;
+ };
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ uart1-rts-cts {
+ pins = "mfio1", "mfio2";
+ function = "uart1";
+ drive-strength = <2>;
+ };
+ };
+
+ enet_pins: enet-pins {
+ pin_enet: enet {
+ pins = "mfio63", "mfio64", "mfio65", "mfio66",
+ "mfio67", "mfio68", "mfio69", "mfio70";
+ function = "eth";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_enet_phy_clk: enet-phy-clk {
+ pins = "mfio71";
+ function = "eth";
+ slew-rate = <1>;
+ drive-strength = <8>;
+ };
+ };
+
+ sdhost_pins: sdhost-pins {
+ pin_sdhost_clk: sdhost-clk {
+ pins = "mfio15";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_cmd: sdhost-cmd {
+ pins = "mfio16";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_data: sdhost-data {
+ pins = "mfio17", "mfio18", "mfio19", "mfio20",
+ "mfio21", "mfio22", "mfio23", "mfio24";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_power_select: sdhost-power-select {
+ pins = "mfio25";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <2>;
+ };
+ pin_sdhost_card_detect: sdhost-card-detect {
+ pins = "mfio26";
+ function = "sdhost";
+ drive-strength = <2>;
+ };
+ pin_sdhost_write_protect: sdhost-write-protect {
+ pins = "mfio27";
+ function = "sdhost";
+ drive-strength = <2>;
+ };
+ };
+
+ ir_pin: ir-pin {
+ ir-data {
+ pins = "mfio72";
+ function = "ir";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm0_pin: pwmpdm0-pin {
+ pwmpdm0 {
+ pins = "mfio73";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm1_pin: pwmpdm1-pin {
+ pwmpdm1 {
+ pins = "mfio74";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm2_pin: pwmpdm2-pin {
+ pwmpdm2 {
+ pins = "mfio75";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm3_pin: pwmpdm3-pin {
+ pwmpdm3 {
+ pins = "mfio76";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ dac_clk_pin: dac-clk-pin {
+ pin_dac_clk: dac-clk {
+ pins = "mfio45";
+ function = "i2s_dac_clk";
+ drive-strength = <4>;
+ };
+ };
+
+ i2s_mclk_pin: i2s-mclk-pin {
+ pin_i2s_mclk: i2s-mclk {
+ pins = "mfio36";
+ function = "i2s_out";
+ drive-strength = <4>;
+ };
+ };
+
+ spdif_out_pin: spdif-out-pin {
+ spdif-out {
+ pins = "mfio61";
+ function = "spdif_out";
+ slew-rate = <1>;
+ drive-strength = <2>;
+ };
+ };
+
+ spdif_in_pin: spdif-in-pin {
+ spdif-in {
+ pins = "mfio62";
+ function = "spdif_in";
+ drive-strength = <2>;
+ };
+ };
+
+ i2s_out_pins: i2s-out-pins {
+ pins_i2s_out_clk: i2s-out-clk {
+ pins = "mfio37", "mfio38";
+ function = "i2s_out";
+ drive-strength = <4>;
+ };
+ pins_i2s_out: i2s-out {
+ pins = "mfio39", "mfio40",
+ "mfio41", "mfio42",
+ "mfio43", "mfio44";
+ function = "i2s_out";
+ drive-strength = <2>;
+ };
+ };
+
+ i2s_in_pins: i2s-in-pins {
+ i2s-in {
+ pins = "mfio47", "mfio48", "mfio49",
+ "mfio50", "mfio51", "mfio52",
+ "mfio53", "mfio54";
+ function = "i2s_in";
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ timer: timer@18102000 {
+ compatible = "img,pistachio-gptimer";
+ reg = <0x18102000 0x100>;
+ interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+ <&cr_periph SYS_CLK_TIMER>;
+ clock-names = "fast", "sys";
+ img,cr-periph = <&cr_periph>;
+ };
+
+ wdt: watchdog@18102100 {
+ compatible = "img,pdc-wdt";
+ reg = <0x18102100 0x100>;
+ interrupts = <GIC_SHARED 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_WD>, <&cr_periph SYS_CLK_WD>;
+ clock-names = "wdt", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_WD_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_WD_DIV>;
+ assigned-clock-rates = <4000000>, <32768>;
+ };
+
+ ir: ir@18102200 {
+ compatible = "img,ir-rev1";
+ reg = <0x18102200 0x100>;
+ interrupts = <GIC_SHARED 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_IR>, <&cr_periph SYS_CLK_IR>;
+ clock-names = "core", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_IR_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_IR_DIV>;
+ assigned-clock-rates = <4000000>, <32768>;
+ pinctrl-0 = <&ir_pin>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ usb: usb@18120000 {
+ compatible = "snps,dwc2";
+ reg = <0x18120000 0x1c000>;
+ interrupts = <GIC_SHARED 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy>;
+ phy-names = "usb2-phy";
+ g-tx-fifo-size = <256 256 256 256>;
+ status = "disabled";
+ };
+
+ enet: ethernet@18140000 {
+ compatible = "snps,dwmac";
+ reg = <0x18140000 0x2000>;
+ interrupts = <GIC_SHARED 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk_core CLK_ENET>, <&cr_periph SYS_CLK_ENET>;
+ clock-names = "stmmaceth", "pclk";
+ assigned-clocks = <&clk_core CLK_ENET_MUX>,
+ <&clk_core CLK_ENET_DIV>;
+ assigned-clock-parents = <&clk_core CLK_SYS_INTERNAL_DIV>;
+ assigned-clock-rates = <0>, <50000000>;
+ pinctrl-0 = <&enet_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
+ sdhost: mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SD_HOST>, <&cr_periph SYS_CLK_SD_HOST>;
+ clock-names = "ciu", "biu";
+ pinctrl-0 = <&sdhost_pins>;
+ pinctrl-names = "default";
+ fifo-depth = <0x20>;
+ clock-frequency = <50000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sram: sram@1b000000 {
+ compatible = "mmio-sram";
+ reg = <0x1b000000 0x10000>;
+ };
+
+ mdc: dma-controller@18143000 {
+ compatible = "img,pistachio-mdc-dma";
+ reg = <0x18143000 0x1000>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cr_periph SYS_CLK_MDC>;
+ clock-names = "sys";
+
+ img,max-burst-multiplier = <16>;
+ img,cr-periph = <&cr_periph>;
+
+ #dma-cells = <3>;
+ };
+
+ clk_core: clk@18144000 {
+ compatible = "img,pistachio-clk", "syscon";
+ clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+ <&cr_top EXT_CLK_ENET_IN>;
+ clock-names = "xtal", "audio_refclk_ext_gate",
+ "ext_enet_in_gate";
+ reg = <0x18144000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ clk_periph: clk@18144800 {
+ compatible = "img,pistachio-clk-periph";
+ reg = <0x18144800 0x1000>;
+ clocks = <&clk_core CLK_PERIPH_SYS>;
+ clock-names = "periph_sys_core";
+ #clock-cells = <1>;
+ };
+
+ cr_periph: clk@18148000 {
+ compatible = "img,pistachio-cr-periph", "syscon", "simple-bus";
+ reg = <0x18148000 0x1000>;
+ clocks = <&clk_periph PERIPH_CLK_SYS>;
+ clock-names = "sys";
+ #clock-cells = <1>;
+
+ pistachio_reset: reset-controller {
+ compatible = "img,pistachio-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ cr_top: clk@18149000 {
+ compatible = "img,pistachio-cr-top", "syscon";
+ reg = <0x18149000 0x200>;
+ #clock-cells = <1>;
+ };
+
+ hash: hash@18149600 {
+ compatible = "img,hash-accelerator";
+ reg = <0x18149600 0x100>, <0x18101100 0x4>;
+ interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 8 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_HASH>,
+ <&clk_periph PERIPH_CLK_ROM>;
+ clock-names = "sys", "hash";
+ };
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_core CLK_MIPS>;
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "img,pistachio-usb-phy";
+ clocks = <&clk_core CLK_USB_PHY>;
+ clock-names = "usb_phy";
+ assigned-clocks = <&clk_core CLK_USB_PHY_DIV>;
+ assigned-clock-rates = <50000000>;
+ img,refclk = <0x2>;
+ img,cr-top = <&cr_top>;
+ #phy-cells = <0>;
+ };
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <52000000>;
+ clock-output-names = "xtal";
+ };
+};
diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts
new file mode 100644
index 000000000..bf69da96d
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ *
+ * IMG Marduk board is also known as Creator Ci40.
+ */
+
+/dts-v1/;
+
+#include "pistachio.dtsi"
+
+/ {
+ model = "IMG Marduk (Creator Ci40)";
+ compatible = "img,pistachio-marduk", "img,pistachio";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ ethernet0 = &enet;
+ spi0 = &spfi0;
+ spi1 = &spfi1;
+ };
+
+ chosen {
+ bootargs = "root=/dev/sda1 rootwait ro lpj=723968";
+ stdout-path = "serial1:115200";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ reg_1v8: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "aux_adc_vref";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ internal_dac_supply: internal-dac-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "internal_dac_supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ leds {
+ compatible = "pwm-leds";
+ heartbeat {
+ label = "marduk:red:heartbeat";
+ pwms = <&pwm 3 300000>;
+ max-brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "Button 1";
+ linux,code = <0x101>; /* BTN_1 */
+ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Button 2";
+ linux,code = <0x102>; /* BTN_2 */
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&internal_dac {
+ VDD-supply = <&internal_dac_supply>;
+};
+
+&spfi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
+ <&spim1_cs1_pin>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "spansion,s25fl016k", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ assigned-clock-rates = <114278400>, <1843200>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&enet {
+ status = "okay";
+};
+
+&pin_enet {
+ drive-strength = <2>;
+};
+
+&pin_enet_phy_clk {
+ drive-strength = <2>;
+};
+
+&sdhost {
+ status = "okay";
+ bus-width = <4>;
+ disable-wp;
+};
+
+&pin_sdhost_cmd {
+ drive-strength = <2>;
+};
+
+&pin_sdhost_data {
+ drive-strength = <2>;
+};
+
+&pwm {
+ status = "okay";
+
+ pinctrl-0 = <&pwmpdm0_pin>, <&pwmpdm1_pin>, <&pwmpdm2_pin>,
+ <&pwmpdm3_pin>;
+ pinctrl-names = "default";
+};
+
+&adc {
+ status = "okay";
+ vref-supply = <&reg_1v8>;
+ adc-reserved-channels = <0x10>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
new file mode 100644
index 000000000..54aa0c4e6
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_JZ4740_QI_LB60) += qi_lb60.dtb
+dtb-$(CONFIG_JZ4740_RS90) += rs90.dtb
+dtb-$(CONFIG_JZ4770_GCW0) += gcw0.dtb
+dtb-$(CONFIG_JZ4780_CI20) += ci20.dtb
+dtb-$(CONFIG_X1000_CU1000_NEO) += cu1000-neo.dtb
+dtb-$(CONFIG_X1830_CU1830_NEO) += cu1830-neo.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
new file mode 100644
index 000000000..75f5bfbf2
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+/ {
+ compatible = "img,ci20", "ingenic,jz4780";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000
+ 0x30000000 0x30000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ sw1 {
+ label = "ci20:sw1";
+ linux,code = <KEY_F13>;
+ gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ci20:red:led0";
+ gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ led1 {
+ label = "ci20:red:led1";
+ gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ led2 {
+ label = "ci20:red:led2";
+ gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu1";
+ };
+
+ led3 {
+ label = "ci20:red:led3";
+ gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ };
+ };
+
+ eth0_power: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "eth0_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
+
+ ir: ir {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan0_power: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan0_power";
+ gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
+};
+
+&ext {
+ clock-frequency = <48000000>;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+
+ cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+
+ brcmf: wifi@1 {
+/* reg = <4>;*/
+ compatible = "brcm,bcm4330-fmac";
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart1>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart3>;
+};
+
+&uart4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart4>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ clock-frequency = <400000>;
+
+ act8600: act8600@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+ status = "okay";
+
+ regulators {
+ vddcore: SUDCDC1 {
+ regulator-name = "DCDC_REG1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+ vddmem: SUDCDC2 {
+ regulator-name = "DCDC_REG2";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ vcc_33: SUDCDC3 {
+ regulator-name = "DCDC_REG3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vcc_50: SUDCDC4 {
+ regulator-name = "SUDCDC_REG4";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ vcc_25: LDO_REG5 {
+ regulator-name = "LDO_REG5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ wifi_io: LDO_REG6 {
+ regulator-name = "LDO_REG6";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ vcc_28: LDO_REG7 {
+ regulator-name = "LDO_REG7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+ vcc_15: LDO_REG8 {
+ regulator-name = "LDO_REG8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ vrtc_18: LDO_REG9 {
+ regulator-name = "LDO_REG9";
+ /* Despite the datasheet stating 3.3V
+ * for REG9 and the driver expecting that,
+ * REG9 outputs 1.8V.
+ * Likely the CI20 uses a proprietary
+ * factory programmed chip variant.
+ * Since this is a simple on/off LDO the
+ * exact values do not matter.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vcc_11: LDO_REG10 {
+ regulator-name = "LDO_REG10";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c1>;
+
+};
+
+&i2c2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c2>;
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c3>;
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4>;
+
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&nemc {
+ status = "okay";
+
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4780-nand";
+ reg = <1 0 0x1000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ingenic,bch-controller = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ /*
+ * Only CLE/ALE are needed for the devices that are connected, rather
+ * than the full address line set.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x0 0x0 0x800000>;
+ };
+
+ partition@800000 {
+ label = "u-boot";
+ reg = <0x0 0x800000 0x0 0x200000>;
+ };
+
+ partition@a00000 {
+ label = "u-boot-env";
+ reg = <0x0 0xa00000 0x0 0x200000>;
+ };
+
+ partition@c00000 {
+ label = "boot";
+ reg = <0x0 0xc00000 0x0 0x4000000>;
+ };
+
+ partition@4c00000 {
+ label = "system";
+ reg = <0x0 0x4c00000 0x1 0xfb400000>;
+ };
+ };
+ };
+ };
+
+ dm9000@6 {
+ compatible = "davicom,dm9000";
+ davicom,no-eeprom;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs6>;
+
+ reg = <6 0 1 /* addr */
+ 6 2 1>; /* data */
+
+ ingenic,nemc-tAS = <15>;
+ ingenic,nemc-tAH = <10>;
+ ingenic,nemc-tBP = <20>;
+ ingenic,nemc-tAW = <50>;
+ ingenic,nemc-tSTRV = <100>;
+
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&eth0_power>;
+
+ interrupt-parent = <&gpe>;
+ interrupts = <19 4>;
+
+ nvmem-cells = <&eth0_addr>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&pinctrl {
+ pins_uart0: uart0 {
+ function = "uart0";
+ groups = "uart0-data";
+ bias-disable;
+ };
+
+ pins_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1-data";
+ bias-disable;
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data", "uart2-hwflow";
+ bias-disable;
+ };
+
+ pins_uart3: uart3 {
+ function = "uart3";
+ groups = "uart3-data", "uart3-hwflow";
+ bias-disable;
+ };
+
+ pins_uart4: uart4 {
+ function = "uart4";
+ groups = "uart4-data";
+ bias-disable;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-disable;
+ };
+
+ pins_i2c1: i2c1 {
+ function = "i2c1";
+ groups = "i2c1-data";
+ bias-disable;
+ };
+
+ pins_i2c2: i2c2 {
+ function = "i2c2";
+ groups = "i2c2-data";
+ bias-disable;
+ };
+
+ pins_i2c3: i2c3 {
+ function = "i2c3";
+ groups = "i2c3-data";
+ bias-disable;
+ };
+
+ pins_i2c4: i2c4 {
+ function = "i2c4";
+ groups = "i2c4-data-e";
+ bias-disable;
+ };
+
+ pins_nemc: nemc {
+ function = "nemc";
+ groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+ bias-disable;
+ };
+
+ pins_nemc_cs1: nemc-cs1 {
+ function = "nemc-cs1";
+ groups = "nemc-cs1";
+ bias-disable;
+ };
+
+ pins_nemc_cs6: nemc-cs6 {
+ function = "nemc-cs6";
+ groups = "nemc-cs6";
+ bias-disable;
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-e", "mmc0-4bit-e";
+ bias-disable;
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ bias-disable;
+ };
+};
+
+&tcu {
+ /* 3 MHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+ assigned-clock-rates = <3000000>, <3000000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/cu1000-neo.dts b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
new file mode 100644
index 000000000..22a1066d6
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1000-neo.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "yna,cu1000-neo", "ingenic,x1000e";
+ model = "YSH & ATIL General Board CU1000-Neo";
+
+ aliases {
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x04000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpb 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ wlan_pwrseq: msc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&exclk {
+ clock-frequency = <24000000>;
+};
+
+&tcu {
+ /* 1500 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+ assigned-clock-rates = <1500000>, <1500000>;
+
+ /* Use channel #0 for the system timer channel #2 for the clocksource */
+ ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830: adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+};
+
+&msc0 {
+ status = "okay";
+
+ bus-width = <8>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc0>;
+
+ non-removable;
+};
+
+&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc1>;
+
+ non-removable;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ ap6212a: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ brcm,drive-strength = <10>;
+ };
+};
+
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&lan8720a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ lan8720a: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data-d";
+ bias-pull-up;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
+ };
+
+ pins_msc0: msc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit", "mmc0-4bit", "mmc0-8bit";
+ bias-disable;
+ };
+
+ pins_msc1: msc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit", "mmc1-4bit";
+ bias-disable;
+ };
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/cu1830-neo.dts b/arch/mips/boot/dts/ingenic/cu1830-neo.dts
new file mode 100644
index 000000000..640f96c00
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/cu1830-neo.dts
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "x1830.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "yna,cu1830-neo", "ingenic,x1830";
+ model = "YSH & ATIL General Board CU1830-Neo";
+
+ aliases {
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&gpc 17 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ wlan_pwrseq: msc1-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ reset-gpios = <&gpc 13 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&exclk {
+ clock-frequency = <24000000>;
+};
+
+&tcu {
+ /* 1500 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+ assigned-clock-rates = <1500000>, <1500000>;
+
+ /* Use channel #0 for the system timer channel #2 for the clocksource */
+ ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart1>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ clock-frequency = <400000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ ads7830: adc@48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+};
+
+&msc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc0>;
+
+ non-removable;
+};
+
+&msc1 {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_msc1>;
+
+ non-removable;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ ap6212a: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupt-parent = <&gpc>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ brcm,drive-strength = <10>;
+ };
+};
+
+&mac {
+ status = "okay";
+
+ phy-mode = "rmii";
+ phy-handle = <&ip101gr>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mac>;
+
+ snps,reset-gpio = <&gpb 28 GPIO_ACTIVE_LOW>; /* PB28 */
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+};
+
+&mdio {
+ status = "okay";
+
+ ip101gr: ethernet-phy@0 {
+ compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+};
+
+&pinctrl {
+ pins_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1-data";
+ bias-pull-up;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-pull-up;
+ };
+
+ pins_msc0: msc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit", "mmc0-4bit";
+ bias-disable;
+ };
+
+ pins_msc1: msc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit", "mmc1-4bit";
+ bias-disable;
+ };
+
+ pins_mac: mac {
+ function = "mac";
+ groups = "mac";
+ bias-disable;
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
new file mode 100644
index 000000000..bc72304a2
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "gcw,zero", "ingenic,jz4770";
+ model = "GCW Zero";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ memory: memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000>,
+ <0x30000000 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:57600n8";
+ };
+
+ vcc: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc1_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc1_vcc";
+ gpio = <&gpe 9 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc>;
+ };
+
+ headphones_amp: analog-amplifier@0 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 3 GPIO_ACTIVE_LOW>;
+ enable-delay-ms = <50>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Headphones Amp";
+ };
+
+ speaker_amp: analog-amplifier@1 {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpf 20 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&ldo5>;
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "gcw0-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones",
+ "Line", "FM Radio",
+ "Microphone", "Built-in Mic";
+ simple-audio-card,routing =
+ "Headphones Amp INL", "LHPOUT",
+ "Headphones Amp INR", "RHPOUT",
+ "Headphones", "Headphones Amp OUTL",
+ "Headphones", "Headphones Amp OUTR",
+ "Speaker Amp INL", "LOUT",
+ "Speaker Amp INR", "ROUT",
+ "Speaker", "Speaker Amp OUTL",
+ "Speaker", "Speaker Amp OUTR",
+ "LLINEIN", "FM Radio",
+ "RLINEIN", "FM Radio",
+ "Built-in Mic", "MICBIAS",
+ "MIC1P", "Built-in Mic",
+ "MIC1N", "Built-in Mic";
+ simple-audio-card,pin-switches = "Speaker", "Headphones";
+
+ simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
+ simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ rumble {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm 4 2000000 0>;
+ pwm-names = "enable";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm4>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 1 40000 0>;
+ power-supply = <&vcc>;
+
+ brightness-levels = <0 16 32 48 64 80 96 112 128
+ 144 160 176 192 208 224 240 255>;
+ default-brightness-level = <12>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm1>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ autorepeat;
+
+ button@0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ linux,can-disable;
+ gpios = <&gpe 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ linux,can-disable;
+ gpios = <&gpe 25 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ linux,can-disable;
+ gpios = <&gpe 23 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ linux,can-disable;
+ gpios = <&gpe 24 GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ linux,can-disable;
+ gpios = <&gpe 29 GPIO_ACTIVE_LOW>;
+ };
+
+ button@5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ linux,can-disable;
+ gpios = <&gpe 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button@6 {
+ label = "Button Y";
+ linux,code = <KEY_SPACE>;
+ linux,can-disable;
+ gpios = <&gpe 27 GPIO_ACTIVE_LOW>;
+ };
+
+ button@7 {
+ label = "Button X";
+ linux,code = <KEY_LEFTSHIFT>;
+ linux,can-disable;
+ gpios = <&gpe 28 GPIO_ACTIVE_LOW>;
+ };
+
+ button@8 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ linux,can-disable;
+ gpios = <&gpb 20 GPIO_ACTIVE_LOW>;
+ };
+
+ button@9 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ linux,can-disable;
+ gpios = <&gpe 26 GPIO_ACTIVE_LOW>;
+ };
+
+ button@10 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ linux,can-disable;
+ gpios = <&gpb 21 GPIO_ACTIVE_LOW>;
+ };
+
+ button@11 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ linux,can-disable;
+ /*
+ * This is the only button that is active high,
+ * since it doubles as BOOT_SEL1.
+ */
+ gpios = <&gpd 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@12 {
+ label = "Power slider";
+ linux,code = <KEY_POWER>;
+ linux,can-disable;
+ gpios = <&gpa 30 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button@13 {
+ label = "Power hold";
+ linux,code = <KEY_PAUSE>;
+ linux,can-disable;
+ gpios = <&gpf 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ i2c3: i2c-controller@3 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpd 5 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpd 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>; /* 250 kHz */
+
+ act8600: pmic@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+
+ regulators {
+ /* USB OTG */
+ otg_vbus: SUDCDC_REG4 {
+ /*
+ * 5.3V instead of 5.0V to compensate
+ * for the voltage drop of a diode
+ * between the regulator and the
+ * connector.
+ */
+ regulator-min-microvolt = <5300000>;
+ regulator-max-microvolt = <5300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * When this is off, there is no sound, but also
+ * no USB networking.
+ */
+ ldo5: LDO5 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* LCD panel and FM radio */
+ ldo6: LDO6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ inl-supply = <&vcc>;
+ };
+
+ /* ??? */
+ LDO7 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /*regulator-always-on;*/
+ inl-supply = <&vcc>;
+ };
+
+ /*
+ * The colors on the LCD are wrong when this is
+ * off. Which is strange, since the LCD panel
+ * data sheet only mentions a 3.3V input.
+ */
+ LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* RTC fixed 3.3V */
+ LDO_REG9 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ inl-supply = <&vcc>;
+ };
+
+ /* Unused fixed 1.2V */
+ LDO_REG10 {
+ inl-supply = <&vcc>;
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led {
+ gpios = <&gpb 30 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpe 15 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpe 17 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpe 16 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ nt39016@0 {
+ compatible = "kingdisplay,kd035g6-54nt";
+ reg = <0>;
+
+ spi-max-frequency = <3125000>;
+ spi-3wire;
+ spi-cs-high;
+
+ reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+ backlight = <&backlight>;
+ power-supply = <&ldo6>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+ };
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ label = "mini-USB";
+ type = "mini";
+
+ /*
+ * USB OTG is not yet working reliably, the ID detection
+ * mechanism tends to fry easily for unknown reasons.
+ * Until this is fixed, disable OTG by not providing the
+ * ID GPIO to the driver.
+ */
+ //id-gpios = <&gpf 18 GPIO_ACTIVE_LOW>;
+
+ vbus-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&otg_vbus>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_otg>;
+
+ port {
+ usb_ep: endpoint {
+ remote-endpoint = <&usb_otg_ep>;
+ };
+ };
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-24bit";
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data";
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-a", "mmc0-4bit-a";
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ };
+
+ pins_otg: otg {
+ otg-vbus-pin {
+ function = "otg";
+ groups = "otg-vbus";
+ };
+
+ vbus-pin {
+ pins = "PB5";
+ bias-disable;
+ };
+ };
+
+ pins_pwm1: pwm1 {
+ function = "pwm1";
+ groups = "pwm1";
+ };
+
+ pins_pwm4: pwm4 {
+ function = "pwm4";
+ groups = "pwm4";
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+
+ status = "okay";
+};
+
+&cgu {
+ /*
+ * Put high-speed peripherals under PLL1, such that we can change the
+ * PLL0 frequency on demand without having to suspend peripherals.
+ * We use a rate of 432 MHz, which is the least common multiple of
+ * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+ * Put the GPU under PLL0 since we want a higher frequency.
+ * Use the 32 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks =
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_UHC>,
+ <&cgu JZ4770_CLK_LPCLK_MUX>,
+ <&cgu JZ4770_CLK_MMC0_MUX>,
+ <&cgu JZ4770_CLK_MMC1_MUX>;
+ assigned-clock-parents =
+ <0>,
+ <&cgu JZ4770_CLK_PLL0>,
+ <&cgu JZ4770_CLK_OSC32K>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>,
+ <&cgu JZ4770_CLK_PLL1>;
+ assigned-clock-rates =
+ <432000000>,
+ <600000000>;
+};
+
+&uhc {
+ /* The WiFi module is connected to the UHC. */
+ status = "okay";
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timer and clocksource, 12 MHz for the OST,
+ * and use RTC as the parent for the watchdog clock
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>,
+ <&tcu TCU_CLK_OST>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <0>, <&cgu JZ4770_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>, <12000000>;
+
+ /* PWM1 is in use, so use channel #2 for the clocksource */
+ ingenic,pwm-channels-mask = <0xfa>;
+};
+
+&usb_otg {
+ port {
+ usb_otg_ep: endpoint {
+ remote-endpoint = <&usb_ep>;
+ };
+ };
+};
+
+&otg_phy {
+ vcc-supply = <&ldo5>;
+};
+
+&rtc {
+ clocks = <&cgu JZ4770_CLK_RTC>;
+ clock-names = "rtc";
+
+ system-power-controller;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vcc>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <48000000>;
+ cd-gpios = <&gpb 2 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&mmc1_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/gcw0_proto.dts b/arch/mips/boot/dts/ingenic/gcw0_proto.dts
new file mode 100644
index 000000000..02df22f8a
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0_proto.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "gcw0.dts"
+
+/ {
+ model = "GCW Zero Prototype";
+};
+
+&memory {
+ /* Prototype has only 256 MiB of RAM */
+ reg = <0x0 0x10000000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4725b.dtsi b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
new file mode 100644
index 000000000..a1f0b71c9
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4725b.dtsi
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4725b-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4725b";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4725b-intc", "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: clock-controller@10000000 {
+ compatible = "ingenic,jz4725b-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4725b-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4725B_CLK_RTC>,
+ <&cgu JZ4725B_CLK_EXT>,
+ <&cgu JZ4725B_CLK_PCLK>,
+ <&cgu JZ4725B_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23>, <22>, <21>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4725b-watchdog", "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@60 {
+ compatible = "ingenic,jz4725b-pwm";
+ reg = <0x60 0x40>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>;
+ clock-names = "timer0", "timer1", "timer2",
+ "timer3", "timer4", "timer5";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4725b-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4725b-rtc", "ingenic,jz4740-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+
+ clocks = <&cgu JZ4725B_CLK_RTC>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pinctrl@10010000 {
+ compatible = "ingenic,jz4725b-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4725b-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4725b-i2s", "ingenic,jz4740-i2s";
+ reg = <0x10020000 0x38>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>,
+ <&cgu JZ4725B_CLK_I2S>,
+ <&cgu JZ4725B_CLK_EXT>,
+ <&cgu JZ4725B_CLK_PLL_HALF>;
+ clock-names = "aic", "i2s", "ext", "pll half";
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a4 {
+ compatible = "ingenic,jz4725b-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4725b-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4725B_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+
+ dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4725b-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4725B_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+
+ dmas = <&dmac 31 0xffffffff>, <&dmac 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ uart: serial@10030000 {
+ compatible = "ingenic,jz4725b-uart", "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4725B_CLK_UART>;
+ clock-names = "baud", "module";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4725b-adc";
+ #io-channel-cells = <1>;
+
+ reg = <0x10070000 0x30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10070000 0x30>;
+
+ clocks = <&cgu JZ4725B_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ nemc: memory-controller@13010000 {
+ compatible = "ingenic,jz4725b-nemc", "ingenic,jz4740-nemc";
+ reg = <0x13010000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x18000000 0x4000000>, <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>, <4 0 0x08000000 0x4000000>;
+
+ clocks = <&cgu JZ4725B_CLK_MCLK>;
+ };
+
+ dmac: dma-controller@13020000 {
+ compatible = "ingenic,jz4725b-dma";
+ reg = <0x13020000 0xd8>, <0x13020300 0x14>;
+
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <29>;
+
+ clocks = <&cgu JZ4725B_CLK_DMA>;
+ };
+
+ udc: usb@13040000 {
+ compatible = "ingenic,jz4725b-musb", "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4725B_CLK_UDC>;
+ clock-names = "udc";
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4725b-lcd";
+ reg = <0x13050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4725B_CLK_LCD>;
+ clock-names = "lcd_pclk";
+
+ lcd_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@8 {
+ reg = <8>;
+
+ ipu_output: endpoint {
+ remote-endpoint = <&ipu_input>;
+ };
+ };
+ };
+ };
+
+ ipu: ipu@13080000 {
+ compatible = "ingenic,jz4725b-ipu";
+ reg = <0x13080000 0x64>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ clocks = <&cgu JZ4725B_CLK_IPU>;
+ clock-names = "ipu";
+
+ port {
+ ipu_input: endpoint {
+ remote-endpoint = <&ipu_output>;
+ };
+ };
+ };
+
+ bch: ecc-controller@130d0000 {
+ compatible = "ingenic,jz4725b-bch";
+ reg = <0x130d0000 0x44>;
+
+ clocks = <&cgu JZ4725B_CLK_BCH>;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ probe-type = "map_rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi b/arch/mips/boot/dts/ingenic/jz4740.dtsi
new file mode 100644
index 000000000..eee523678
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4740-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4740";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-mxu1.0";
+ reg = <0>;
+
+ clocks = <&cgu JZ4740_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4740-intc";
+ reg = <0x10001000 0x14>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtc: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4740-cgu@10000000 {
+ compatible = "ingenic,jz4740-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&rtc>;
+ clock-names = "ext", "rtc";
+
+ #clock-cells = <1>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4740-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_RTC>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PCLK>,
+ <&cgu JZ4740_CLK_TCU>;
+ clock-names = "rtc", "ext", "pclk", "tcu";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <23 22 21>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4740-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+
+ clocks = <&cgu JZ4740_CLK_RTC>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4740-pinctrl";
+ reg = <0x10010000 0x400>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <28>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <26>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4740-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <25>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4740-i2s";
+ reg = <0x10020000 0x38>;
+
+ #sound-dai-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ clocks = <&cgu JZ4740_CLK_AIC>,
+ <&cgu JZ4740_CLK_I2S>,
+ <&cgu JZ4740_CLK_EXT>,
+ <&cgu JZ4740_CLK_PLL_HALF>;
+ clock-names = "aic", "i2s", "ext", "pll half";
+
+ dmas = <&dmac 25 0xffffffff>, <&dmac 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a4 {
+ compatible = "ingenic,jz4740-codec";
+ reg = <0x10020080 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4740_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc: mmc@10021000 {
+ compatible = "ingenic,jz4740-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4740_CLK_MMC>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+
+ dmas = <&dmac 27 0xffffffff>, <&dmac 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <9>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART0>;
+ clock-names = "baud", "module";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4740-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ clocks = <&ext>, <&cgu JZ4740_CLK_UART1>;
+ clock-names = "baud", "module";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4740-adc";
+ reg = <0x10070000 0x30>;
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+
+ nemc: memory-controller@13010000 {
+ compatible = "ingenic,jz4740-nemc";
+ reg = <0x13010000 0x54>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0x18000000 0x4000000>,
+ <2 0 0x14000000 0x4000000>,
+ <3 0 0x0c000000 0x4000000>,
+ <4 0 0x08000000 0x4000000>;
+
+ clocks = <&cgu JZ4740_CLK_MCLK>;
+ };
+
+ ecc: ecc-controller@13010100 {
+ compatible = "ingenic,jz4740-ecc";
+ reg = <0x13010100 0x2C>;
+
+ clocks = <&cgu JZ4740_CLK_MCLK>;
+ };
+
+ dmac: dma-controller@13020000 {
+ compatible = "ingenic,jz4740-dma";
+ reg = <0x13020000 0xbc>, <0x13020300 0x14>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ clocks = <&cgu JZ4740_CLK_DMA>;
+ };
+
+ uhc: uhc@13030000 {
+ compatible = "ingenic,jz4740-ohci", "generic-ohci";
+ reg = <0x13030000 0x1000>;
+
+ clocks = <&cgu JZ4740_CLK_UHC>;
+ assigned-clocks = <&cgu JZ4740_CLK_UHC>;
+ assigned-clock-rates = <48000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ udc: usb@13040000 {
+ compatible = "ingenic,jz4740-musb";
+ reg = <0x13040000 0x10000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+ interrupt-names = "mc";
+
+ clocks = <&cgu JZ4740_CLK_UDC>;
+ clock-names = "udc";
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4740-lcd";
+ reg = <0x13050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+
+ clocks = <&cgu JZ4740_CLK_LCD_PCLK>, <&cgu JZ4740_CLK_LCD>;
+ clock-names = "lcd_pclk", "lcd";
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
new file mode 100644
index 000000000..018721a9e
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4770";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4770_CLK_CCLK>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4770-intc";
+ reg = <0x10001000 0x40>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4770-cgu@10000000 {
+ compatible = "ingenic,jz4770-cgu", "simple-mfd";
+ reg = <0x10000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10000000 0x100>;
+
+ clocks = <&ext>, <&osc32k>;
+ clock-names = "ext", "osc32k";
+
+ #clock-cells = <1>;
+
+ otg_phy: usb-phy@3c {
+ compatible = "ingenic,jz4770-phy";
+ reg = <0x3c 0x10>;
+
+ clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+
+ #phy-cells = <0>;
+ };
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4770-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_RTC>,
+ <&cgu JZ4770_CLK_EXT>,
+ <&cgu JZ4770_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4770-watchdog",
+ "ingenic,jz4740-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4770-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,jz4770-rtc", "ingenic,jz4760-rtc";
+ reg = <0x10003000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4770-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpe: gpio@4 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
+ gpf: gpio@5 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <5>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 160 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+ };
+
+ aic: audio-controller@10020000 {
+ compatible = "ingenic,jz4770-i2s";
+ reg = <0x10020000 0x94>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>, <&cgu JZ4770_CLK_I2S>,
+ <&cgu JZ4770_CLK_EXT>, <&cgu JZ4770_CLK_PLL0>;
+ clock-names = "aic", "i2s", "ext", "pll half";
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ dmas = <&dmac0 25 0xffffffff>, <&dmac0 24 0xffffffff>;
+ dma-names = "rx", "tx";
+ };
+
+ codec: audio-codec@100200a0 {
+ compatible = "ingenic,jz4770-codec";
+ reg = <0x100200a4 0x8>;
+
+ #sound-dai-cells = <0>;
+
+ clocks = <&cgu JZ4770_CLK_AIC>;
+ clock-names = "aic";
+ };
+
+ mmc0: mmc@10021000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10021000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC0>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ dmas = <&dmac1 27 0xffffffff>, <&dmac1 26 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@10022000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10022000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC1>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ dmas = <&dmac1 31 0xffffffff>, <&dmac1 30 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ mmc2: mmc@10023000 {
+ compatible = "ingenic,jz4770-mmc", "ingenic,jz4760-mmc";
+ reg = <0x10023000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_MMC2>;
+ clock-names = "mmc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <35>;
+
+ dmas = <&dmac1 37 0xffffffff>, <&dmac1 36 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ status = "disabled";
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10030000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <5>;
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10031000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <4>;
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10032000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+
+ status = "disabled";
+ };
+
+ uart3: serial@10033000 {
+ compatible = "ingenic,jz4770-uart";
+ reg = <0x10033000 0x100>;
+
+ clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+ clock-names = "baud", "module";
+
+ interrupt-parent = <&intc>;
+ interrupts = <2>;
+
+ status = "disabled";
+ };
+
+ adc: adc@10070000 {
+ compatible = "ingenic,jz4770-adc";
+ reg = <0x10070000 0x30>;
+
+ #io-channel-cells = <1>;
+
+ clocks = <&cgu JZ4770_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ gpu: gpu@13040000 {
+ compatible = "vivante,gc";
+ reg = <0x13040000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>,
+ <&cgu JZ4770_CLK_GPU>;
+ clock-names = "bus", "core", "shader";
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ lcd: lcd-controller@13050000 {
+ compatible = "ingenic,jz4770-lcd";
+ reg = <0x13050000 0x300>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+
+ clocks = <&cgu JZ4770_CLK_LPCLK_MUX>;
+ clock-names = "lcd_pclk";
+ };
+
+ dmac0: dma-controller@13420000 {
+ compatible = "ingenic,jz4770-dma";
+ reg = <0x13420000 0xC0>, <0x13420300 0x20>;
+
+ #dma-cells = <2>;
+
+ clocks = <&cgu JZ4770_CLK_DMA>;
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+ };
+
+ dmac1: dma-controller@13420100 {
+ compatible = "ingenic,jz4770-dma";
+ reg = <0x13420100 0xC0>, <0x13420400 0x20>;
+
+ #dma-cells = <2>;
+
+ clocks = <&cgu JZ4770_CLK_DMA>;
+ interrupt-parent = <&intc>;
+ interrupts = <23>;
+ };
+
+ uhc: uhc@13430000 {
+ compatible = "generic-ohci";
+ reg = <0x13430000 0x1000>;
+
+ clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+ assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+ assigned-clock-rates = <48000000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ status = "disabled";
+ };
+
+ usb_otg: usb@13440000 {
+ compatible = "ingenic,jz4770-musb";
+ reg = <0x13440000 0x10000>;
+
+ clocks = <&cgu JZ4770_CLK_OTG>;
+ clock-names = "udc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+ interrupt-names = "mc";
+
+ phys = <&otg_phy>;
+
+ usb-role-switch;
+ };
+
+ rom: memory@1fc00000 {
+ compatible = "mtd-rom";
+ probe-type = "map_rom";
+ reg = <0x1fc00000 0x2000>;
+
+ bank-width = <4>;
+ device-width = <1>;
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
new file mode 100644
index 000000000..830e5dd35
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/jz4780-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/dma/jz4780-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,jz4780";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu JZ4780_CLK_CPU>;
+ clock-names = "cpu";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <1>;
+
+ clocks = <&cgu JZ4780_CLK_CORE1>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtc: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: jz4780-cgu@10000000 {
+ compatible = "ingenic,jz4780-cgu";
+ reg = <0x10000000 0x100>;
+
+ clocks = <&ext>, <&rtc>;
+ clock-names = "ext", "rtc";
+
+ #clock-cells = <1>;
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,jz4780-tcu",
+ "ingenic,jz4770-tcu",
+ "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_EXCLK>,
+ <&cgu JZ4780_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ watchdog: watchdog@0 {
+ compatible = "ingenic,jz4780-watchdog";
+ reg = <0x0 0xc>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+
+ pwm: pwm@40 {
+ compatible = "ingenic,jz4780-pwm", "ingenic,jz4740-pwm";
+ reg = <0x40 0x80>;
+
+ #pwm-cells = <3>;
+
+ clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>,
+ <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>,
+ <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>;
+ clock-names = "timer0", "timer1", "timer2", "timer3",
+ "timer4", "timer5", "timer6", "timer7";
+ };
+
+ ost: timer@e0 {
+ compatible = "ingenic,jz4780-ost", "ingenic,jz4770-ost";
+ reg = <0xe0 0x20>;
+
+ clocks = <&tcu TCU_CLK_OST>;
+ clock-names = "ost";
+
+ interrupts = <15>;
+ };
+ };
+
+ rtc_dev: rtc@10003000 {
+ compatible = "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu JZ4780_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,jz4780-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+
+ gpe: gpio@4 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <4>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 128 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <13>;
+ };
+
+ gpf: gpio@5 {
+ compatible = "ingenic,jz4780-gpio";
+ reg = <5>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 160 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+ };
+ };
+
+ spi_gpio {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-chipselects = <2>;
+
+ gpio-miso = <&gpe 14 0>;
+ gpio-sck = <&gpe 15 0>;
+ gpio-mosi = <&gpe 17 0>;
+ cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
+
+ spidev@0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart3: serial@10033000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10033000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <48>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART3>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart4: serial@10034000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10034000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <34>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART4>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c@10050000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0x10050000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu JZ4780_CLK_SMB0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0_data>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c@10051000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10051000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu JZ4780_CLK_SMB1>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c1_data>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c@10052000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10052000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu JZ4780_CLK_SMB2>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c2_data>;
+
+ status = "disabled";
+ };
+
+ i2c3: i2c@10053000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10053000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <57>;
+
+ clocks = <&cgu JZ4780_CLK_SMB3>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c3_data>;
+
+ status = "disabled";
+ };
+
+ i2c4: i2c@10054000 {
+ compatible = "ingenic,jz4780-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10054000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <56>;
+
+ clocks = <&cgu JZ4780_CLK_SMB4>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4_data>;
+
+ status = "disabled";
+ };
+
+ nemc: nemc@13410000 {
+ compatible = "ingenic,jz4780-nemc", "simple-mfd";
+ reg = <0x13410000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x13410000 0x10000>,
+ <1 0 0x1b000000 0x1000000>,
+ <2 0 0x1a000000 0x1000000>,
+ <3 0 0x19000000 0x1000000>,
+ <4 0 0x18000000 0x1000000>,
+ <5 0 0x17000000 0x1000000>,
+ <6 0 0x16000000 0x1000000>;
+
+ clocks = <&cgu JZ4780_CLK_NEMC>;
+
+ status = "disabled";
+
+ efuse: efuse@d0 {
+ reg = <0 0xd0 0x30>;
+ compatible = "ingenic,jz4780-efuse";
+
+ clocks = <&cgu JZ4780_CLK_AHB2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_addr: eth-mac-addr@22 {
+ reg = <0x22 0x6>;
+ };
+ };
+ };
+
+ dma: dma@13420000 {
+ compatible = "ingenic,jz4780-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu JZ4780_CLK_PDMA>;
+ };
+
+ mmc0: mmc@13450000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu JZ4780_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ dmas = <&dma JZ4780_DMA_MSC0_RX 0xffffffff>,
+ <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mmc1: mmc@13460000 {
+ compatible = "ingenic,jz4780-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu JZ4780_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+ dmas = <&dma JZ4780_DMA_MSC1_RX 0xffffffff>,
+ <&dma JZ4780_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ bch: bch@134d0000 {
+ compatible = "ingenic,jz4780-bch";
+ reg = <0x134d0000 0x10000>;
+
+ clocks = <&cgu JZ4780_CLK_BCH>;
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts
new file mode 100644
index 000000000..ba0218971
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4740.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/input/input.h>
+
+#define KEY_QI_QI KEY_F13
+#define KEY_QI_UPRED KEY_RIGHTALT
+#define KEY_QI_VOLUP KEY_VOLUMEUP
+#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN
+#define KEY_QI_FN KEY_LEFTCTRL
+
+/ {
+ compatible = "qi,lb60", "ingenic,jz4740";
+ model = "Ben Nanonote";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ stdout-path = &uart0;
+ };
+
+ vcc: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mmc_power: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc_vcc";
+ gpio = <&gpd 2 0>;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ amp_supply: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "amp_supply";
+ gpio = <&gpd 4 0>;
+ enable-active-high;
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ amp: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpb 29 GPIO_ACTIVE_HIGH>;
+ VCC-supply = <&amp_supply>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "QI LB60";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Microphone", "Mic";
+ simple-audio-card,routing =
+ "MIC", "Mic",
+ "Speaker", "OUTL",
+ "Speaker", "OUTR",
+ "INL", "LOUT",
+ "INR", "ROUT";
+
+ simple-audio-card,aux-devs = <&amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ key {
+ label = "Power";
+ wakeup-source;
+ linux,code = <KEY_POWER>;
+ gpios = <&gpd 29 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keyboard {
+ compatible = "gpio-matrix-keypad";
+
+ col-scan-delay-us = <10>;
+ debounce-delay-ms = <10>;
+ wakeup-source;
+
+ row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>,
+ <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>;
+ col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>,
+ <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>;
+ gpio-activelow;
+
+ linux,keymap =
+ <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */
+ <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */
+ <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */
+ <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */
+ <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */
+ <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */
+ <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */
+
+ <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */
+ <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */
+ <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */
+ <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */
+ <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */
+ <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */
+ <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */
+ <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */
+ <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */
+ <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */
+ <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */
+ <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */
+ <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */
+ <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */
+ <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */
+ <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */
+ <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */
+ <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */
+ <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */
+ <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */
+ <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */
+ <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */
+ <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */
+ <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */
+ <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */
+ <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */
+ <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */
+ <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */
+ <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */
+ <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */
+ <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */
+ <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */
+ <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */
+ <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */
+ <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */
+ <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */
+ <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */
+ <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */
+ <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */
+ <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */
+ <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */
+ <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */
+ <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */
+ <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */
+ <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */
+ <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */
+ <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */
+ <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */
+
+ <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */
+ <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */
+ <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+ };
+
+ usb_charger: charger {
+ compatible = "gpio-charger";
+ charger-type = "usb-sdp";
+ gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+ status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+ };
+
+ simple_battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3600000>;
+ voltage-max-design-microvolt = <4200000>;
+ };
+
+ pmu {
+ compatible = "ingenic,jz4740-battery";
+ io-channels = <&adc INGENIC_ADC_BATTERY>;
+ io-channel-names = "battery";
+ power-supplies = <&usb_charger>;
+ monitored-battery = <&simple_battery>;
+ };
+
+ hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ };
+
+ panel: panel {
+ compatible = "giantplus,gpm940b0";
+
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+
+ vcc-supply = <&vcc>;
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+ system-power-controller;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+ status = "disabled";
+};
+
+&nemc {
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4740-nand";
+ reg = <1 0 0x4000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&ecc>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <4>;
+ nand-ecc-mode = "hw";
+ nand-is-boot-medium;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "kernel";
+ reg = <0x400000 0x400000>;
+ };
+
+ partition@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0>;
+ };
+ };
+ };
+ };
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+
+ port {
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
+
+&udc {
+ phys = <&usb_phy>;
+};
+
+&pinctrl {
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-8bit";
+ };
+
+ pins_nemc: nemc {
+ function = "nand";
+ groups = "nand-fre-fwe", "nand-cs1";
+ };
+
+ pins_uart0: uart0 {
+ function = "uart0";
+ groups = "uart0-data";
+ bias-disable;
+ };
+
+ pins_mmc: mmc {
+ mmc {
+ function = "mmc";
+ groups = "mmc-1bit", "mmc-4bit";
+ bias-disable;
+ };
+
+ mmc-gpios {
+ pins = "PD0", "PD2";
+ bias-disable;
+ };
+ };
+};
+
+&mmc {
+ bus-width = <4>;
+ max-frequency = <24000000>;
+ cd-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&mmc_power>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc>;
+};
+
+&tcu {
+ /* 750 kHz for the system timer and clocksource */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+ assigned-clock-rates = <750000>, <750000>;
+};
diff --git a/arch/mips/boot/dts/ingenic/rs90.dts b/arch/mips/boot/dts/ingenic/rs90.dts
new file mode 100644
index 000000000..4eb1edbfc
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/rs90.dts
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4725b.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ compatible = "ylm,rs90", "ingenic,jz4725b";
+ model = "RS-90";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ vcc: regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc";
+ regulaor-min-microvolt = <3300000>;
+ regulaor-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 40000 0>;
+
+ brightness-levels = <0 16 32 48 64 80 112 144 192 255>;
+ default-brightness-level = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_pwm3>;
+
+ power-supply = <&vcc>;
+ };
+
+ keys@0 {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ key@0 {
+ label = "D-pad up";
+ linux,code = <KEY_UP>;
+ gpios = <&gpc 10 GPIO_ACTIVE_LOW>;
+ };
+
+ key@1 {
+ label = "D-pad down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpc 11 GPIO_ACTIVE_LOW>;
+ };
+
+ key@2 {
+ label = "D-pad left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&gpb 31 GPIO_ACTIVE_LOW>;
+ };
+
+ key@3 {
+ label = "D-pad right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&gpd 21 GPIO_ACTIVE_LOW>;
+ };
+
+ key@4 {
+ label = "Button A";
+ linux,code = <KEY_LEFTCTRL>;
+ gpios = <&gpc 31 GPIO_ACTIVE_LOW>;
+ };
+
+ key@5 {
+ label = "Button B";
+ linux,code = <KEY_LEFTALT>;
+ gpios = <&gpc 30 GPIO_ACTIVE_LOW>;
+ };
+
+ key@6 {
+ label = "Right shoulder button";
+ linux,code = <KEY_BACKSPACE>;
+ gpios = <&gpc 12 GPIO_ACTIVE_LOW>;
+ debounce-interval = <10>;
+ };
+
+ key@7 {
+ label = "Start button";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpd 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys@1 {
+ compatible = "adc-keys";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1400000>;
+ poll-interval = <30>;
+
+ key@0 {
+ label = "Left shoulder button";
+ linux,code = <KEY_TAB>;
+ press-threshold-microvolt = <800000>;
+ };
+
+ key@1 {
+ label = "Select button";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1100000>;
+ };
+ };
+
+ amp: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&gpc 15 GPIO_ACTIVE_HIGH>;
+
+ VCC-supply = <&vcc>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "rs90-audio";
+ simple-audio-card,format = "i2s";
+
+ simple-audio-card,widgets =
+ "Speaker", "Speaker",
+ "Headphone", "Headphones";
+ simple-audio-card,routing =
+ "INL", "LHPOUT",
+ "INR", "RHPOUT",
+ "Headphones", "LHPOUT",
+ "Headphones", "RHPOUT",
+ "Speaker", "OUTL",
+ "Speaker", "OUTR";
+ simple-audio-card,pin-switches = "Speaker";
+
+ simple-audio-card,hp-det-gpio = <&gpd 16 GPIO_ACTIVE_LOW>;
+ simple-audio-card,aux-devs = <&amp>;
+
+ simple-audio-card,bitclock-master = <&dai_codec>;
+ simple-audio-card,frame-master = <&dai_codec>;
+
+ dai_cpu: simple-audio-card,cpu {
+ sound-dai = <&aic>;
+ };
+
+ dai_codec: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+
+ };
+
+ usb_phy: usb-phy {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+
+ clocks = <&cgu JZ4725B_CLK_UDC_PHY>;
+ clock-names = "main_clk";
+ vcc-supply = <&vcc>;
+ };
+
+ panel {
+ compatible = "sharp,ls020b1dd01d";
+
+ backlight = <&backlight>;
+ power-supply = <&vcc>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&panel_output>;
+ };
+ };
+ };
+};
+
+&ext {
+ clock-frequency = <12000000>;
+};
+
+&rtc_dev {
+ system-power-controller;
+};
+
+&udc {
+ phys = <&usb_phy>;
+};
+
+&pinctrl {
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit";
+ };
+
+ pins_nemc: nemc {
+ function = "nand";
+ groups = "nand-cs1", "nand-cle-ale", "nand-fre-fwe";
+ };
+
+ pins_pwm3: pwm3 {
+ function = "pwm3";
+ groups = "pwm3";
+ bias-disable;
+ };
+
+ pins_lcd: lcd {
+ function = "lcd";
+ groups = "lcd-8bit", "lcd-16bit", "lcd-special";
+ };
+};
+
+&mmc0 {
+ status = "disabled";
+};
+
+&mmc1 {
+ bus-width = <1>;
+ max-frequency = <48000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+
+ cd-gpios = <&gpc 20 GPIO_ACTIVE_LOW>;
+};
+
+&uart {
+ /*
+ * The pins for RX/TX are used for the right shoulder button and
+ * backlight PWM.
+ */
+ status = "disabled";
+};
+
+&nemc {
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4725b-nand";
+ reg = <1 0 0x4000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ecc-engine = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ rb-gpios = <&gpc 27 GPIO_ACTIVE_HIGH>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <8>;
+ nand-ecc-mode = "hw";
+ nand-is-boot-medium;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x20000>;
+ };
+
+ partition@20000 {
+ label = "system";
+ reg = <0x20000 0x0>;
+ };
+ };
+ };
+ };
+};
+
+&cgu {
+ /* Use 32kHz oscillator as the parent of the RTC clock */
+ assigned-clocks = <&cgu JZ4725B_CLK_RTC>;
+ assigned-clock-parents = <&cgu JZ4725B_CLK_OSC32K>;
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timer and clocksource, and use RTC as the
+ * parent for the watchdog clock.
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, <&tcu TCU_CLK_WDT>;
+ assigned-clock-parents = <0>, <0>, <&cgu JZ4725B_CLK_RTC>;
+ assigned-clock-rates = <750000>, <750000>;
+};
+
+&lcd {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_lcd>;
+};
+
+&lcd_ports {
+ port@0 {
+ reg = <0>;
+
+ panel_output: endpoint {
+ remote-endpoint = <&panel_input>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
new file mode 100644
index 000000000..1f1f896dd
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/x1000-cgu.h>
+#include <dt-bindings/dma/x1000-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,x1000", "ingenic,x1000e";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+ reg = <0>;
+
+ clocks = <&cgu X1000_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ exclk: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtclk: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: x1000-cgu@10000000 {
+ compatible = "ingenic,x1000-cgu";
+ reg = <0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&exclk>, <&rtclk>;
+ clock-names = "ext", "rtc";
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,x1000-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>,
+ <&cgu X1000_CLK_EXCLK>,
+ <&cgu X1000_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ wdt: watchdog@0 {
+ compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x0 0x10>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1000_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,x1000-pinctrl";
+ reg = <0x10010000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,x1000-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart2: serial@10032000 {
+ compatible = "ingenic,x1000-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&exclk>, <&cgu X1000_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu X1000_CLK_I2C0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu X1000_CLK_I2C1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1000_CLK_I2C2>;
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1000-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1000_CLK_PDMA>;
+ };
+
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1000_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1000_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1000_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1000-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1000_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
new file mode 100644
index 000000000..b05dac3ae
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/clock/x1830-cgu.h>
+#include <dt-bindings/dma/x1830-dma.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ingenic,x1830";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "ingenic,xburst-fpu2.0-mxu2.0";
+ reg = <0>;
+
+ clocks = <&cgu X1830_CLK_CPU>;
+ clock-names = "cpu";
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ intc: interrupt-controller@10001000 {
+ compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc";
+ reg = <0x10001000 0x50>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ exclk: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ rtclk: rtc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ cgu: x1830-cgu@10000000 {
+ compatible = "ingenic,x1830-cgu";
+ reg = <0x10000000 0x100>;
+
+ #clock-cells = <1>;
+
+ clocks = <&exclk>, <&rtclk>;
+ clock-names = "ext", "rtc";
+ };
+
+ tcu: timer@10002000 {
+ compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd";
+ reg = <0x10002000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x10002000 0x1000>;
+
+ #clock-cells = <1>;
+
+ clocks = <&cgu X1830_CLK_RTCLK
+ &cgu X1830_CLK_EXCLK
+ &cgu X1830_CLK_PCLK>;
+ clock-names = "rtc", "ext", "pclk";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <27 26 25>;
+
+ wdt: watchdog@0 {
+ compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog";
+ reg = <0x0 0x10>;
+
+ clocks = <&tcu TCU_CLK_WDT>;
+ clock-names = "wdt";
+ };
+ };
+
+ rtc: rtc@10003000 {
+ compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc";
+ reg = <0x10003000 0x4c>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <32>;
+
+ clocks = <&cgu X1830_CLK_RTCLK>;
+ clock-names = "rtc";
+ };
+
+ pinctrl: pin-controller@10010000 {
+ compatible = "ingenic,x1830-pinctrl";
+ reg = <0x10010000 0x800>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpa: gpio@0 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+
+ gpb: gpio@1 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <1>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 32 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ };
+
+ gpc: gpio@2 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <2>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 64 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <15>;
+ };
+
+ gpd: gpio@3 {
+ compatible = "ingenic,x1830-gpio";
+ reg = <3>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 96 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <14>;
+ };
+ };
+
+ uart0: serial@10030000 {
+ compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+ reg = <0x10030000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <51>;
+
+ clocks = <&exclk>, <&cgu X1830_CLK_UART0>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ uart1: serial@10031000 {
+ compatible = "ingenic,x1830-uart", "ingenic,x1000-uart";
+ reg = <0x10031000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <50>;
+
+ clocks = <&exclk>, <&cgu X1830_CLK_UART1>;
+ clock-names = "baud", "module";
+
+ status = "disabled";
+ };
+
+ i2c0: i2c-controller@10050000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10050000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <60>;
+
+ clocks = <&cgu X1830_CLK_SMB0>;
+
+ status = "disabled";
+ };
+
+ i2c1: i2c-controller@10051000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10051000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <59>;
+
+ clocks = <&cgu X1830_CLK_SMB1>;
+
+ status = "disabled";
+ };
+
+ i2c2: i2c-controller@10052000 {
+ compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c";
+ reg = <0x10052000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <58>;
+
+ clocks = <&cgu X1830_CLK_SMB2>;
+
+ status = "disabled";
+ };
+
+ pdma: dma-controller@13420000 {
+ compatible = "ingenic,x1830-dma";
+ reg = <0x13420000 0x400
+ 0x13421000 0x40>;
+ #dma-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu X1830_CLK_PDMA>;
+ };
+
+ msc0: mmc@13450000 {
+ compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+ reg = <0x13450000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <37>;
+
+ clocks = <&cgu X1830_CLK_MSC0>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>,
+ <&pdma X1830_DMA_MSC0_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ msc1: mmc@13460000 {
+ compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc";
+ reg = <0x13460000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+
+ clocks = <&cgu X1830_CLK_MSC1>;
+ clock-names = "mmc";
+
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ cap-sdio-irq;
+
+ dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>,
+ <&pdma X1830_DMA_MSC1_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ status = "disabled";
+ };
+
+ mac: ethernet@134b0000 {
+ compatible = "ingenic,x1830-mac", "snps,dwmac";
+ reg = <0x134b0000 0x2000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <55>;
+ interrupt-names = "macirq";
+
+ clocks = <&cgu X1830_CLK_MAC>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+
+ mdio: mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
new file mode 100644
index 000000000..f5dfc0624
--- /dev/null
+++ b/arch/mips/boot/dts/lantiq/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
new file mode 100644
index 000000000..510be63c8
--- /dev/null
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,xway", "lantiq,danube";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24Kc";
+ };
+ };
+
+ biu@1f800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,biu", "simple-bus";
+ reg = <0x1f800000 0x800000>;
+ ranges = <0x0 0x1f800000 0x7fffff>;
+
+ icu0: icu@80200 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "lantiq,icu";
+ reg = <0x80200 0x120>;
+ };
+
+ watchdog@803f0 {
+ compatible = "lantiq,wdt";
+ reg = <0x803f0 0x10>;
+ };
+ };
+
+ sram@1f000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,sram";
+ reg = <0x1f000000 0x800000>;
+ ranges = <0x0 0x1f000000 0x7fffff>;
+
+ eiu0: eiu@101000 {
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent;
+ compatible = "lantiq,eiu-xway";
+ reg = <0x101000 0x1000>;
+ };
+
+ pmu0: pmu@102000 {
+ compatible = "lantiq,pmu-xway";
+ reg = <0x102000 0x1000>;
+ };
+
+ cgu0: cgu@103000 {
+ compatible = "lantiq,cgu-xway";
+ reg = <0x103000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ rcu0: rcu@203000 {
+ compatible = "lantiq,rcu-xway";
+ reg = <0x203000 0x1000>;
+ };
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "lantiq,fpi", "simple-bus";
+ ranges = <0x0 0x10000000 0xeefffff>;
+ reg = <0x10000000 0xef00000>;
+
+ gptu@e100a00 {
+ compatible = "lantiq,gptu-xway";
+ reg = <0xe100a00 0x100>;
+ };
+
+ serial@e100c00 {
+ compatible = "lantiq,asc";
+ reg = <0xe100c00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+ };
+
+ dma0: dma@e104100 {
+ compatible = "lantiq,dma-xway";
+ reg = <0xe104100 0x800>;
+ };
+
+ ebu0: ebu@e105300 {
+ compatible = "lantiq,ebu-xway";
+ reg = <0xe105300 0x100>;
+ };
+
+ pci0: pci@e105400 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ compatible = "lantiq,pci-xway";
+ bus-range = <0x0 0x0>;
+ ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
+ 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
+ reg = <0x7000000 0x8000 /* config space */
+ 0xe105400 0x400>; /* pci bridge */
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
new file mode 100644
index 000000000..1ce20b7d0
--- /dev/null
+++ b/arch/mips/boot/dts/lantiq/easy50712.dts
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "danube.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ fpi@10000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ localbus@0 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
+ 1 0 0x4000000 0x4000010>; /* addsel1 */
+ compatible = "lantiq,localbus", "simple-bus";
+
+ nor-boot@0 {
+ compatible = "lantiq,nor";
+ bank-width = <2>;
+ reg = <0 0x0 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x00000 0x10000>; /* 64 KB */
+ };
+
+ partition@10000 {
+ label = "uboot_env";
+ reg = <0x10000 0x10000>; /* 64 KB */
+ };
+
+ partition@20000 {
+ label = "linux";
+ reg = <0x20000 0x3d0000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x400000>;
+ };
+ };
+ };
+
+ gpio: pinmux@e100b10 {
+ compatible = "lantiq,danube-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xe100b10 0xa0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ exin {
+ lantiq,groups = "exin1";
+ lantiq,function = "exin";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
+ etop@e180000 {
+ compatible = "lantiq,etop-xway";
+ reg = <0xe180000 0x40000>;
+ interrupt-parent = <&icu0>;
+ interrupts = <73 78>;
+ phy-mode = "rmii";
+ mac-address = [ 00 11 22 33 44 55 ];
+ };
+
+ stp0: stp@e100bb0 {
+ #gpio-cells = <2>;
+ compatible = "lantiq,gpio-stp-xway";
+ gpio-controller;
+ reg = <0xe100bb0 0x40>;
+
+ lantiq,shadow = <0xfff>;
+ lantiq,groups = <0x3>;
+ };
+
+ pci@e105400 {
+ lantiq,bus-clock = <33333333>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
+ >;
+ gpios-reset = <&gpio 21 0>;
+ req-mask = <0x1>; /* GNT1 */
+ };
+
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
new file mode 100644
index 000000000..8fd0efb37
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/Makefile
@@ -0,0 +1,8 @@
+# SPDX_License_Identifier: GPL_2.0
+dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_4core_ls7a.dtb
+dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_4core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64) += loongson64c_8core_rs780e.dtb
+dtb-$(CONFIG_MACH_LOONGSON64) += loongson64g_4core_ls7a.dtb
+dtb-$(CONFIG_MACH_LOONGSON64) += loongson64v_4core_virtio.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/loongson/loongson64c-package.dtsi b/arch/mips/boot/dts/loongson/loongson64c-package.dtsi
new file mode 100644
index 000000000..5bb876a4d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c-package.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ package0: bus@1fe00000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+ 0 0x3ff00000 0 0x3ff00000 0x100000
+ /* 3A HT Config Space */
+ 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000
+ /* 3B HT Config Space */
+ 0x1efd 0xfb000000 0x1efd 0xfb000000 0x10000000>;
+
+ liointc: interrupt-controller@3ff01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0 0x3ff01400 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>;
+ interrupt-names = "int0", "int1";
+
+ loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+ <0x0f000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+
+ };
+
+ cpu_uart0: serial@1fe001e0 {
+ compatible = "ns16550a";
+ reg = <0 0x1fe001e0 0x8>;
+ clock-frequency = <33000000>;
+ interrupt-parent = <&liointc>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ cpu_uart1: serial@1fe001e8 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x1fe001e8 0x8>;
+ clock-frequency = <33000000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&liointc>;
+ no-loopback-test;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
new file mode 100644
index 000000000..c7ea4f1c0
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c_4core_ls7a.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "ls7a-pch.dtsi"
+
+/ {
+ compatible = "loongson,loongson64c-4core-ls7a";
+};
+
+&package0 {
+ htvec: interrupt-controller@efdfb000080 {
+ compatible = "loongson,htvec-1.0";
+ reg = <0xefd 0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&pch {
+ msi: msi-controller@2ff00000 {
+ compatible = "loongson,pch-msi-1.0";
+ reg = <0 0x2ff00000 0 0x8>;
+ interrupt-controller;
+ msi-controller;
+ loongson,msi-base-vec = <64>;
+ loongson,msi-num-vecs = <64>;
+ interrupt-parent = <&htvec>;
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts b/arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts
new file mode 100644
index 000000000..d681a295d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c_4core_rs780e.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+ compatible = "loongson,loongson64c-4core-rs780e";
+};
+
+&package0 {
+ htpic: interrupt-controller@efdfb000080 {
+ compatible = "loongson,htpic-1.0";
+ reg = <0xefd 0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts b/arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts
new file mode 100644
index 000000000..3c2044142
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64c_8core_rs780e.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64c-package.dtsi"
+#include "rs780e-pch.dtsi"
+
+/ {
+ compatible = "loongson,loongson64c-8core-rs780e";
+};
+
+&package0 {
+ htpic: interrupt-controller@1efdfb000080 {
+ compatible = "loongson,htpic-1.0";
+ reg = <0x1efd 0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64g-package.dtsi b/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
new file mode 100644
index 000000000..38abc570c
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64g-package.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ package0: bus@1fe00000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+ 0 0x3ff00000 0 0x3ff00000 0x100000
+ 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
+
+ liointc: interrupt-controller@3ff01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0 0x3ff01400 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>;
+ interrupt-names = "int0", "int1";
+
+ loongson,parent_int_map = <0x00ffffff>, /* int0 */
+ <0xff000000>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+
+ };
+
+ cpu_uart0: serial@1fe001e0 {
+ compatible = "ns16550a";
+ reg = <0 0x1fe00100 0x10>;
+ clock-frequency = <100000000>;
+ interrupt-parent = <&liointc>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ cpu_uart1: serial@1fe001e8 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x1fe00110 0x10>;
+ clock-frequency = <100000000>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&liointc>;
+ no-loopback-test;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
new file mode 100644
index 000000000..c945f8565
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "loongson64g-package.dtsi"
+#include "ls7a-pch.dtsi"
+
+/ {
+ compatible = "loongson,loongson64g-4core-ls7a";
+};
+
+&package0 {
+ htvec: interrupt-controller@efdfb000080 {
+ compatible = "loongson,htvec-1.0";
+ reg = <0xefd 0xfb000080 0x40>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&liointc>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <25 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <29 IRQ_TYPE_LEVEL_HIGH>,
+ <30 IRQ_TYPE_LEVEL_HIGH>,
+ <31 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&pch {
+ msi: msi-controller@2ff00000 {
+ compatible = "loongson,pch-msi-1.0";
+ reg = <0 0x2ff00000 0 0x8>;
+ interrupt-controller;
+ msi-controller;
+ loongson,msi-base-vec = <64>;
+ loongson,msi-num-vecs = <192>;
+ interrupt-parent = <&htvec>;
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts b/arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts
new file mode 100644
index 000000000..41f0b110d
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/loongson64v_4core_virtio.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+/ {
+ compatible = "loongson,loongson64v-4core-virtio";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ package0: bus@1fe00000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
+ 0 0x3ff00000 0 0x3ff00000 0x100000
+ 0xefd 0xfb000000 0xefd 0xfb000000 0x10000000>;
+
+ liointc: interrupt-controller@3ff01400 {
+ compatible = "loongson,liointc-1.0";
+ reg = <0 0x3ff01400 0x64>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>;
+ interrupt-names = "int0", "int1";
+
+ loongson,parent_int_map = <0x00000001>, /* int0 */
+ <0xfffffffe>, /* int1 */
+ <0x00000000>, /* int2 */
+ <0x00000000>; /* int3 */
+
+ };
+
+ cpu_uart0: serial@1fe001e0 {
+ compatible = "ns16550a";
+ reg = <0 0x1fe001e0 0x8>;
+ clock-frequency = <33000000>;
+ interrupt-parent = <&liointc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+ };
+
+ bus@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */
+ 0 0x40000000 0 0x40000000 0 0x40000000>; /* PCI MEM */
+
+ rtc0: rtc@10081000 {
+ compatible = "google,goldfish-rtc";
+ reg = <0 0x10081000 0 0x1000>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&liointc>;
+ };
+
+ pci@1a000000 {
+ compatible = "pci-host-ecam-generic";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ bus-range = <0x0 0x1f>;
+ reg = <0 0x1a000000 0 0x02000000>;
+
+ ranges = <0x01000000 0x0 0x00004000 0x0 0x18004000 0x0 0x0000c000>,
+ <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+ interrupt-map = <
+ 0x0000 0x0 0x0 0x1 &liointc 0x2 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0x0 0x0 0x1 &liointc 0x3 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0x0 0x0 0x1 &liointc 0x4 IRQ_TYPE_LEVEL_HIGH
+ 0x1800 0x0 0x0 0x1 &liointc 0x5 IRQ_TYPE_LEVEL_HIGH
+ >;
+
+ interrupt-map-mask = <0x1800 0x0 0x0 0x7>;
+ };
+
+ isa {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0x18000000 0x4000>;
+ };
+ };
+
+ hypervisor {
+ compatible = "linux,kvm";
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
new file mode 100644
index 000000000..f99a7a11f
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ pch: bus@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x10000000 0 0x10000000 0 0x10000000 /* PIO & CONF & APB */
+ 0 0x20000000 0 0x20000000 0 0x10000000
+ 0 0x40000000 0 0x40000000 0 0x40000000 /* PCI MEM */
+ 0xe00 0x00000000 0xe00 0x00000000 0x100 0x0000000>;
+
+ pic: interrupt-controller@10000000 {
+ compatible = "loongson,pch-pic-1.0";
+ reg = <0 0x10000000 0 0x400>;
+ interrupt-controller;
+ interrupt-parent = <&htvec>;
+ loongson,pic-base-vec = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ ls7a_uart0: serial@10080000 {
+ compatible = "ns16550a";
+ reg = <0 0x10080000 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ ls7a_uart1: serial@10080100 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x10080100 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ ls7a_uart2: serial@10080200 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x10080200 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ ls7a_uart3: serial@10080300 {
+ status = "disabled";
+ compatible = "ns16550a";
+ reg = <0 0x10080300 0 0x100>;
+ clock-frequency = <50000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ no-loopback-test;
+ };
+
+ pci@1a000000 {
+ compatible = "loongson,ls7a-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <2>;
+ msi-parent = <&msi>;
+
+ reg = <0 0x1a000000 0 0x02000000>,
+ <0xefe 0x00000000 0 0x20000000>;
+
+ ranges = <0x01000000 0x0 0x00020000 0x0 0x18020000 0x0 0x00020000>,
+ <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+
+ ohci@4,0 {
+ compatible = "pci0014,7a24.0",
+ "pci0014,7a24",
+ "pciclass0c0310",
+ "pciclass0c03";
+
+ reg = <0x2000 0x0 0x0 0x0 0x0>;
+ interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ ehci@4,1 {
+ compatible = "pci0014,7a14.0",
+ "pci0014,7a14",
+ "pciclass0c0320",
+ "pciclass0c03";
+
+ reg = <0x2100 0x0 0x0 0x0 0x0>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ ohci@5,0 {
+ compatible = "pci0014,7a24.0",
+ "pci0014,7a24",
+ "pciclass0c0310",
+ "pciclass0c03";
+
+ reg = <0x2800 0x0 0x0 0x0 0x0>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ ehci@5,1 {
+ compatible = "pci0014,7a14.0",
+ "pci0014,7a14",
+ "pciclass0c0320",
+ "pciclass0c03";
+
+ reg = <0x2900 0x0 0x0 0x0 0x0>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ sata@8,0 {
+ compatible = "pci0014,7a08.0",
+ "pci0014,7a08",
+ "pciclass010601",
+ "pciclass0106";
+
+ reg = <0x4000 0x0 0x0 0x0 0x0>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ sata@8,1 {
+ compatible = "pci0014,7a08.0",
+ "pci0014,7a08",
+ "pciclass010601",
+ "pciclass0106";
+
+ reg = <0x4100 0x0 0x0 0x0 0x0>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ sata@8,2 {
+ compatible = "pci0014,7a08.0",
+ "pci0014,7a08",
+ "pciclass010601",
+ "pciclass0106";
+
+ reg = <0x4200 0x0 0x0 0x0 0x0>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ gpu@6,0 {
+ compatible = "pci0014,7a15.0",
+ "pci0014,7a15",
+ "pciclass030200",
+ "pciclass0302";
+
+ reg = <0x3000 0x0 0x0 0x0 0x0>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ dc@6,1 {
+ compatible = "pci0014,7a06.0",
+ "pci0014,7a06",
+ "pciclass030000",
+ "pciclass0300";
+
+ reg = <0x3100 0x0 0x0 0x0 0x0>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ hda@7,0 {
+ compatible = "pci0014,7a07.0",
+ "pci0014,7a07",
+ "pciclass040300",
+ "pciclass0403";
+
+ reg = <0x3800 0x0 0x0 0x0 0x0>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+ };
+
+ gmac@3,0 {
+ compatible = "pci0014,7a03.0",
+ "pci0014,7a03",
+ "pciclass020000",
+ "pciclass0200";
+
+ reg = <0x1800 0x0 0x0 0x0 0x0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+ <13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ interrupt-parent = <&pic>;
+ phy-mode = "rgmii";
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+ };
+
+ gmac@3,1 {
+ compatible = "pci0014,7a03.0",
+ "pci0014,7a03",
+ "pciclass020000",
+ "pciclass0200";
+
+ reg = <0x1900 0x0 0x0 0x0 0x0>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+ interrupt-parent = <&pic>;
+ phy-mode = "rgmii";
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@1 {
+ reg = <0>;
+ };
+ };
+ };
+
+ pci_bridge@9,0 {
+ compatible = "pci0014,7a19.1",
+ "pci0014,7a19",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x4800 0x0 0x0 0x0 0x0>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@a,0 {
+ compatible = "pci0014,7a09.1",
+ "pci0014,7a09",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x5000 0x0 0x0 0x0 0x0>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@b,0 {
+ compatible = "pci0014,7a09.1",
+ "pci0014,7a09",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x5800 0x0 0x0 0x0 0x0>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@c,0 {
+ compatible = "pci0014,7a09.1",
+ "pci0014,7a09",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x6000 0x0 0x0 0x0 0x0>;
+ interrupts = <35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@d,0 {
+ compatible = "pci0014,7a19.1",
+ "pci0014,7a19",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x6800 0x0 0x0 0x0 0x0>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@e,0 {
+ compatible = "pci0014,7a09.1",
+ "pci0014,7a09",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x7000 0x0 0x0 0x0 0x0>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@f,0 {
+ compatible = "pci0014,7a29.1",
+ "pci0014,7a29",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x7800 0x0 0x0 0x0 0x0>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@10,0 {
+ compatible = "pci0014,7a19.1",
+ "pci0014,7a19",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x8000 0x0 0x0 0x0 0x0>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@11,0 {
+ compatible = "pci0014,7a29.1",
+ "pci0014,7a29",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x8800 0x0 0x0 0x0 0x0>;
+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 42 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@12,0 {
+ compatible = "pci0014,7a19.1",
+ "pci0014,7a19",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x9000 0x0 0x0 0x0 0x0>;
+ interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 43 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@13,0 {
+ compatible = "pci0014,7a29.1",
+ "pci0014,7a29",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0x9800 0x0 0x0 0x0 0x0>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pci_bridge@14,0 {
+ compatible = "pci0014,7a19.1",
+ "pci0014,7a19",
+ "pciclass060400",
+ "pciclass0604";
+
+ reg = <0xa000 0x0 0x0 0x0 0x0>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&pic>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ isa {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0x18000000 0x20000>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
new file mode 100644
index 000000000..871c866e0
--- /dev/null
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ bus@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x10000000 0 0x10000000 0 0x10000000
+ 0 0x40000000 0 0x40000000 0 0x40000000
+ 0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;
+
+ pci@1a000000 {
+ compatible = "loongson,rs780e-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ reg = <0 0x1a000000 0 0x02000000>;
+
+ ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x0000c000>,
+ <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ };
+
+ isa {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0x18000000 0x4000>;
+
+ rtc0: rtc@70 {
+ compatible = "motorola,mc146818";
+ reg = <1 0x70 0x8>;
+ interrupts = <8>;
+ interrupt-parent = <&htpic>;
+ };
+
+ acpi@800 {
+ compatible = "loongson,rs780e-acpi";
+ reg = <1 0x800 0x100>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/mscc/Makefile b/arch/mips/boot/dts/mscc/Makefile
new file mode 100644
index 000000000..eb7151587
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_MSCC_OCELOT) += ocelot_pcb123.dtb ocelot_pcb120.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
new file mode 100644
index 000000000..535a98284
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mscc,ocelot";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ device_type = "cpu";
+ clocks = <&cpu_clk>;
+ reg = <0>;
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ cpu_clk: cpu-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+
+ ahb_clk: ahb-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&cpu_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ ahb@70000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x70000000 0x2000000>;
+
+ interrupt-parent = <&intc>;
+
+ cpu_ctrl: syscon@0 {
+ compatible = "mscc,ocelot-cpu-syscon", "syscon";
+ reg = <0x0 0x2c>;
+ };
+
+ intc: interrupt-controller@70 {
+ compatible = "mscc,ocelot-icpu-intr";
+ reg = <0x70 0x70>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ uart0: serial@100000 {
+ pinctrl-0 = <&uart_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x100000 0x20>;
+ interrupts = <6>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ i2c: i2c@100400 {
+ compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+ reg = <0x100400 0x100>, <0x198 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clocks = <&ahb_clk>;
+
+ status = "disabled";
+ };
+
+ uart2: serial@100800 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ compatible = "ns16550a";
+ reg = <0x100800 0x20>;
+ interrupts = <7>;
+ clocks = <&ahb_clk>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ status = "disabled";
+ };
+
+ spi: spi@101000 {
+ compatible = "mscc,ocelot-spi", "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x101000 0x100>, <0x3c 0x18>;
+ interrupts = <9>;
+ clocks = <&ahb_clk>;
+
+ status = "disabled";
+ };
+
+ switch@1010000 {
+ compatible = "mscc,vsc7514-switch";
+ reg = <0x1010000 0x10000>,
+ <0x1030000 0x10000>,
+ <0x1080000 0x100>,
+ <0x10e0000 0x10000>,
+ <0x11e0000 0x100>,
+ <0x11f0000 0x100>,
+ <0x1200000 0x100>,
+ <0x1210000 0x100>,
+ <0x1220000 0x100>,
+ <0x1230000 0x100>,
+ <0x1240000 0x100>,
+ <0x1250000 0x100>,
+ <0x1260000 0x100>,
+ <0x1270000 0x100>,
+ <0x1280000 0x100>,
+ <0x1800000 0x80000>,
+ <0x1880000 0x10000>,
+ <0x1040000 0x10000>,
+ <0x1050000 0x10000>,
+ <0x1060000 0x10000>;
+ reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+ "port2", "port3", "port4", "port5", "port6",
+ "port7", "port8", "port9", "port10", "qsys",
+ "ana", "s0", "s1", "s2";
+ interrupts = <18 21 22>;
+ interrupt-names = "ptp_rdy", "xtr", "inj";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port0: port@0 {
+ reg = <0>;
+ };
+ port1: port@1 {
+ reg = <1>;
+ };
+ port2: port@2 {
+ reg = <2>;
+ };
+ port3: port@3 {
+ reg = <3>;
+ };
+ port4: port@4 {
+ reg = <4>;
+ };
+ port5: port@5 {
+ reg = <5>;
+ };
+ port6: port@6 {
+ reg = <6>;
+ };
+ port7: port@7 {
+ reg = <7>;
+ };
+ port8: port@8 {
+ reg = <8>;
+ };
+ port9: port@9 {
+ reg = <9>;
+ };
+ port10: port@10 {
+ reg = <10>;
+ };
+ };
+ };
+
+ reset@1070008 {
+ compatible = "mscc,ocelot-chip-reset";
+ reg = <0x1070008 0x4>;
+ };
+
+ gpio: pinctrl@1070034 {
+ compatible = "mscc,ocelot-pinctrl";
+ reg = <0x1070034 0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 22>;
+ interrupt-controller;
+ interrupts = <13>;
+ #interrupt-cells = <2>;
+
+ i2c_pins: i2c-pins {
+ pins = "GPIO_16", "GPIO_17";
+ function = "twi";
+ };
+
+ uart_pins: uart-pins {
+ pins = "GPIO_6", "GPIO_7";
+ function = "uart";
+ };
+
+ uart2_pins: uart2-pins {
+ pins = "GPIO_12", "GPIO_13";
+ function = "uart2";
+ };
+
+ miim1: miim1 {
+ pins = "GPIO_14", "GPIO_15";
+ function = "miim";
+ };
+
+ };
+
+ mdio0: mdio@107009c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-miim";
+ reg = <0x107009c 0x24>, <0x10700f0 0x8>;
+ interrupts = <14>;
+ status = "disabled";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ reg = <3>;
+ };
+ };
+
+ mdio1: mdio@10700c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mscc,ocelot-miim";
+ reg = <0x10700c0 0x24>;
+ interrupts = <15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&miim1>;
+ status = "disabled";
+ };
+
+ hsio: syscon@10d0000 {
+ compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+ reg = <0x10d0000 0x10000>;
+
+ serdes: serdes {
+ compatible = "mscc,vsc7514-serdes";
+ #phy-cells = <2>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
new file mode 100644
index 000000000..897de5025
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy-ocelot-serdes.h>
+#include "ocelot.dtsi"
+
+/ {
+ compatible = "mscc,ocelot-pcb120", "mscc,ocelot";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0e000000>;
+ };
+};
+
+&gpio {
+ phy_int_pins: phy_int_pins {
+ pins = "GPIO_4";
+ function = "gpio";
+ };
+
+ phy_load_save_pins: phy_load_save_pins {
+ pins = "GPIO_10";
+ function = "ptp2";
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
+
+ phy7: ethernet-phy@0 {
+ reg = <0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ };
+ phy6: ethernet-phy@1 {
+ reg = <1>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ };
+ phy5: ethernet-phy@2 {
+ reg = <2>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ };
+ phy4: ethernet-phy@3 {
+ reg = <3>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio>;
+ load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&port0 {
+ phy-handle = <&phy0>;
+};
+
+&port1 {
+ phy-handle = <&phy1>;
+};
+
+&port2 {
+ phy-handle = <&phy2>;
+};
+
+&port3 {
+ phy-handle = <&phy3>;
+};
+
+&port4 {
+ phy-handle = <&phy7>;
+ phy-mode = "sgmii";
+ phys = <&serdes 4 SERDES1G(2)>;
+};
+
+&port5 {
+ phy-handle = <&phy4>;
+ phy-mode = "sgmii";
+ phys = <&serdes 5 SERDES1G(5)>;
+};
+
+&port6 {
+ phy-handle = <&phy6>;
+ phy-mode = "sgmii";
+ phys = <&serdes 6 SERDES1G(3)>;
+};
+
+&port9 {
+ phy-handle = <&phy5>;
+ phy-mode = "sgmii";
+ phys = <&serdes 9 SERDES1G(4)>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
new file mode 100644
index 000000000..ef852f382
--- /dev/null
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2017 Microsemi Corporation */
+
+/dts-v1/;
+
+#include "ocelot.dtsi"
+
+/ {
+ compatible = "mscc,ocelot-pcb123", "mscc,ocelot";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0e000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "macronix,mx25l25635f", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c {
+ clock-frequency = <100000>;
+ i2c-sda-hold-time-ns = <300>;
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&port0 {
+ phy-handle = <&phy0>;
+};
+
+&port1 {
+ phy-handle = <&phy1>;
+};
+
+&port2 {
+ phy-handle = <&phy2>;
+};
+
+&port3 {
+ phy-handle = <&phy3>;
+};
diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
new file mode 100644
index 000000000..b5f742699
--- /dev/null
+++ b/arch/mips/boot/dts/mti/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MIPS_MALTA) += malta.dtb
+dtb-$(CONFIG_LEGACY_BOARD_SEAD3) += sead3.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
new file mode 100644
index 000000000..f03279b1c
--- /dev/null
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */
+/memreserve/ 0x00001000 0x000ef000; /* YAMON */
+/memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mti,malta";
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ };
+ };
+
+ i8259: interrupt-controller@20 {
+ compatible = "intel,i8259";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ flash@1e000000 {
+ compatible = "intel,dt28f160", "cfi-flash";
+ reg = <0x1e000000 0x400000>;
+ bank-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ yamon@0 {
+ label = "YAMON";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ user-fs@100000 {
+ label = "User FS";
+ reg = <0x100000 0x2e0000>;
+ };
+
+ board-config@3e0000 {
+ label = "Board Config";
+ reg = <0x3e0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+
+ fpga_regs: system-controller@1f000000 {
+ compatible = "mti,malta-fpga", "syscon", "simple-mfd";
+ reg = <0x1f000000 0x1000>;
+ native-endian;
+
+ lcd@410 {
+ compatible = "mti,malta-lcd";
+ offset = <0x410>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&fpga_regs>;
+ offset = <0x500>;
+ mask = <0x42>;
+ };
+ };
+
+ isa {
+ compatible = "isa";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0 0 0x1000>;
+
+ rtc@70 {
+ compatible = "motorola,mc146818";
+ reg = <1 0x70 0x8>;
+
+ interrupt-parent = <&i8259>;
+ interrupts = <8>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
new file mode 100644
index 000000000..192c26ff1
--- /dev/null
+++ b/arch/mips/boot/dts/mti/sead3.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00001000; // reserved
+/memreserve/ 0x00001000 0x000ef000; // ROM data
+/memreserve/ 0x000f0000 0x004cc000; // reserved
+
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mti,sead-3";
+ model = "MIPS SEAD-3";
+
+ chosen {
+ stdout-path = "serial1:115200";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ cpus {
+ cpu@0 {
+ compatible = "mti,mips14KEc", "mti,mips14Kc";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@1b1c0000 {
+ compatible = "mti,gic";
+ reg = <0x1b1c0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+ };
+
+ ehci@1b200000 {
+ compatible = "generic-ehci";
+ reg = <0x1b200000 0x1000>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
+
+ has-transaction-translator;
+ };
+
+ flash@1c000000 {
+ compatible = "intel,28f128j3", "cfi-flash";
+ reg = <0x1c000000 0x2000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ user-fs@0 {
+ label = "User FS";
+ reg = <0x0 0x1fc0000>;
+ };
+
+ board-config@3e0000 {
+ label = "Board Config";
+ reg = <0x1fc0000 0x40000>;
+ };
+ };
+ };
+
+ fpga_regs: system-controller@1f000000 {
+ compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
+ reg = <0x1f000000 0x200>;
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&fpga_regs>;
+ offset = <0x50>;
+ mask = <0x4d>;
+ };
+
+ poweroff {
+ compatible = "restart-poweroff";
+ };
+ };
+
+ system-controller@1f000200 {
+ compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
+ reg = <0x1f000200 0x300>;
+
+ led@10.0 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x1>;
+ label = "pled0";
+ };
+ led@10.1 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x2>;
+ label = "pled1";
+ };
+ led@10.2 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x4>;
+ label = "pled2";
+ };
+ led@10.3 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x8>;
+ label = "pled3";
+ };
+ led@10.4 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x10>;
+ label = "pled4";
+ };
+ led@10.5 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x20>;
+ label = "pled5";
+ };
+ led@10.6 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x40>;
+ label = "pled6";
+ };
+ led@10.7 {
+ compatible = "register-bit-led";
+ offset = <0x10>;
+ mask = <0x80>;
+ label = "pled7";
+ };
+
+ led@18.0 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x1>;
+ label = "fled0";
+ };
+ led@18.1 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x2>;
+ label = "fled1";
+ };
+ led@18.2 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x4>;
+ label = "fled2";
+ };
+ led@18.3 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x8>;
+ label = "fled3";
+ };
+ led@18.4 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x10>;
+ label = "fled4";
+ };
+ led@18.5 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x20>;
+ label = "fled5";
+ };
+ led@18.6 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x40>;
+ label = "fled6";
+ };
+ led@18.7 {
+ compatible = "register-bit-led";
+ offset = <0x18>;
+ mask = <0x80>;
+ label = "fled7";
+ };
+
+ lcd@200 {
+ compatible = "mti,sead3-lcd";
+ offset = <0x200>;
+ };
+ };
+
+ /* UART connected to FTDI & miniUSB socket */
+ uart0: uart@1f000900 {
+ compatible = "ns16550a";
+ reg = <0x1f000900 0x20>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ clock-frequency = <14745600>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */
+
+ no-loopback-test;
+ };
+
+ /* UART connected to RS232 socket */
+ uart1: uart@1f000800 {
+ compatible = "ns16550a";
+ reg = <0x1f000800 0x20>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+
+ clock-frequency = <14745600>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */
+
+ no-loopback-test;
+ };
+
+ eth@1f010000 {
+ compatible = "smsc,lan9115";
+ reg = <0x1f010000 0x10000>;
+ reg-io-width = <4>;
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */
+
+ phy-mode = "mii";
+ smsc,irq-push-pull;
+ smsc,save-mac-address;
+ };
+};
diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
new file mode 100644
index 000000000..45af42244
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
+dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
+dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
+dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
+dtb-$(CONFIG_DT_XLP_RVP) += xlp_rvp.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/netlogic/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts
new file mode 100644
index 000000000..e63e55926
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_evp.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP8XX Device Tree Source for EVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-EVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@32000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x32100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@33000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x33100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ gpio: xlp_gpio@34100 {
+ compatible = "netlogic,xlp832-gpio";
+ reg = <0 0x34100 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pic>;
+ interrupts = <39>;
+ interrupt-controller;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
new file mode 100644
index 000000000..d05abf13f
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP2XX Device Tree Source for FVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-FVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@37100 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x37100 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@37120 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x37120 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ gpio: xlp_gpio@34100 {
+ compatible = "netlogic,xlp208-gpio";
+ reg = <0 0x34100 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pic>;
+ interrupts = <39>;
+ interrupt-controller;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
new file mode 100644
index 000000000..d47de4851
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP9XX Device Tree Source for GVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-GVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x112100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <125000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ pic: pic@110000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x110000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ gpio: xlp_gpio@114100 {
+ compatible = "netlogic,xlp980-gpio";
+ reg = <0 0x114100 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pic>;
+ interrupts = <39>;
+ interrupt-controller;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_rvp.dts b/arch/mips/boot/dts/netlogic/xlp_rvp.dts
new file mode 100644
index 000000000..aa0faee19
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_rvp.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP5XX Device Tree Source for RVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-RVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x112100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <125000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ pic: pic@110000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x110000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ gpio: xlp_gpio@114100 {
+ compatible = "netlogic,xlp532-gpio";
+ reg = <0 0x114100 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pic>;
+ interrupts = <39>;
+ interrupt-controller;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/boot/dts/netlogic/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts
new file mode 100644
index 000000000..3bb0b2e08
--- /dev/null
+++ b/arch/mips/boot/dts/netlogic/xlp_svp.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * XLP3XX Device Tree Source for SVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-SVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x30100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ serial1: serial@31000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x31100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <133333333>;
+ interrupt-parent = <&pic>;
+ interrupts = <18>;
+ };
+ i2c0: ocores@32000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x32100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <30>;
+ };
+ i2c1: ocores@33000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x33100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <32000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <31>;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+
+ dtt@4c {
+ compatible = "national,lm90";
+ reg = <0x4c>;
+ };
+ };
+ pic: pic@4000 {
+ compatible = "netlogic,xlp-pic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x4000 0x200>;
+ interrupt-controller;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ gpio: xlp_gpio@34100 {
+ compatible = "netlogic,xlp316-gpio";
+ reg = <0 0x34100 0x1000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-parent = <&pic>;
+ interrupts = <39>;
+ interrupt-controller;
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts
new file mode 100644
index 000000000..5389ef46c
--- /dev/null
+++ b/arch/mips/boot/dts/ni/169445.dts
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ni,169445";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,mips14KEc";
+ clocks = <&baseclk>;
+ reg = <0>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x10000000>;
+ };
+
+ baseclk: baseclock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ cpu_intc: interrupt-controller {
+ #address-cells = <0>;
+ compatible = "mti,cpu-interrupt-controller";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ ahb@1f300000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1f300000 0x80FFF>;
+
+ gpio1: gpio@10 {
+ compatible = "ni,169445-nand-gpio";
+ reg = <0x10 0x4>;
+ reg-names = "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio2: gpio@14 {
+ compatible = "ni,169445-nand-gpio";
+ reg = <0x14 0x4>;
+ reg-names = "dat";
+ gpio-controller;
+ #gpio-cells = <2>;
+ no-output;
+ };
+
+ nand@0 {
+ compatible = "gpio-control-nand";
+ nand-on-flash-bbt;
+ nand-ecc-mode = "soft_bch";
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <4>;
+ reg = <0x0 4>;
+ gpios = <&gpio2 0 0>, /* rdy */
+ <&gpio1 1 0>, /* nce */
+ <&gpio1 2 0>, /* ale */
+ <&gpio1 3 0>, /* cle */
+ <&gpio1 4 0>; /* nwp */
+ };
+
+ serial@80000 {
+ compatible = "ns16550a";
+ reg = <0x80000 0x1000>;
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <6>;
+ clocks = <&baseclk>;
+ reg-shift = <0>;
+ };
+
+ ethernet@40000 {
+ compatible = "snps,dwmac-4.10a";
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ reg = <0x40000 0x2000>;
+ clock-names = "stmmaceth", "pclk";
+ clocks = <&baseclk>, <&baseclk>;
+
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile
new file mode 100644
index 000000000..93867e1a5
--- /dev/null
+++ b/arch/mips/boot/dts/ni/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445) += 169445.dtb
diff --git a/arch/mips/boot/dts/pic32/Makefile b/arch/mips/boot/dts/pic32/Makefile
new file mode 100644
index 000000000..fb57f3632
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_PIC32_MZDA_SK) += pic32mzda_sk.dtb
+
+dtb-$(CONFIG_DTB_PIC32_NONE) += \
+ pic32mzda_sk.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
new file mode 100644
index 000000000..f1e3dad6b
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ */
+#include <dt-bindings/clock/microchip,pic32-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&evic>;
+
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ gpio5 = &gpio5;
+ gpio6 = &gpio6;
+ gpio7 = &gpio7;
+ gpio8 = &gpio8;
+ gpio9 = &gpio9;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mti,mips14KEc";
+ device_type = "cpu";
+ };
+ };
+
+ soc {
+ compatible = "microchip,pic32mzda-infra";
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ /* external clock input on TxCLKI pin */
+ txcki: txcki_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ status = "disabled";
+ };
+
+ /* external input on REFCLKIx pin */
+ refix: refix_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ status = "disabled";
+ };
+
+ rootclk: clock-controller@1f801200 {
+ compatible = "microchip,pic32mzda-clk";
+ reg = <0x1f801200 0x200>;
+ #clock-cells = <1>;
+ microchip,pic32mzda-sosc;
+ };
+
+ evic: interrupt-controller@1f810000 {
+ compatible = "microchip,pic32mzda-evic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1f810000 0x1000>;
+ microchip,external-irqs = <3 8 13 18 23>;
+ };
+
+ pic32_pinctrl: pinctrl@1f801400{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,pic32mzda-pinctrl";
+ reg = <0x1f801400 0x400>;
+ clocks = <&rootclk PB1CLK>;
+ };
+
+ /* PORTA */
+ gpio0: gpio0@1f860000 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860000 0x100>;
+ interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <0>;
+ gpio-ranges = <&pic32_pinctrl 0 0 16>;
+ };
+
+ /* PORTB */
+ gpio1: gpio1@1f860100 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860100 0x100>;
+ interrupts = <119 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <1>;
+ gpio-ranges = <&pic32_pinctrl 0 16 16>;
+ };
+
+ /* PORTC */
+ gpio2: gpio2@1f860200 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860200 0x100>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <2>;
+ gpio-ranges = <&pic32_pinctrl 0 32 16>;
+ };
+
+ /* PORTD */
+ gpio3: gpio3@1f860300 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860300 0x100>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <3>;
+ gpio-ranges = <&pic32_pinctrl 0 48 16>;
+ };
+
+ /* PORTE */
+ gpio4: gpio4@1f860400 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860400 0x100>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <4>;
+ gpio-ranges = <&pic32_pinctrl 0 64 16>;
+ };
+
+ /* PORTF */
+ gpio5: gpio5@1f860500 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860500 0x100>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <5>;
+ gpio-ranges = <&pic32_pinctrl 0 80 16>;
+ };
+
+ /* PORTG */
+ gpio6: gpio6@1f860600 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860600 0x100>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <6>;
+ gpio-ranges = <&pic32_pinctrl 0 96 16>;
+ };
+
+ /* PORTH */
+ gpio7: gpio7@1f860700 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860700 0x100>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <7>;
+ gpio-ranges = <&pic32_pinctrl 0 112 16>;
+ };
+
+ /* PORTI does not exist */
+
+ /* PORTJ */
+ gpio8: gpio8@1f860800 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860800 0x100>;
+ interrupts = <126 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <8>;
+ gpio-ranges = <&pic32_pinctrl 0 128 16>;
+ };
+
+ /* PORTK */
+ gpio9: gpio9@1f860900 {
+ compatible = "microchip,pic32mzda-gpio";
+ reg = <0x1f860900 0x100>;
+ interrupts = <127 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&rootclk PB4CLK>;
+ microchip,gpio-bank = <9>;
+ gpio-ranges = <&pic32_pinctrl 0 144 16>;
+ };
+
+ sdhci: sdhci@1f8ec000 {
+ compatible = "microchip,pic32mzda-sdhci";
+ reg = <0x1f8ec000 0x100>;
+ interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
+ clock-names = "base_clk", "sys_clk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ uart1: serial@1f822000 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822000 0x50>;
+ interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+ <113 IRQ_TYPE_LEVEL_HIGH>,
+ <114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ status = "disabled";
+ };
+
+ uart2: serial@1f822200 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822200 0x50>;
+ interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
+ <146 IRQ_TYPE_LEVEL_HIGH>,
+ <147 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ status = "disabled";
+ };
+
+ uart3: serial@1f822400 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822400 0x50>;
+ interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
+ <158 IRQ_TYPE_LEVEL_HIGH>,
+ <159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ status = "disabled";
+ };
+
+ uart4: serial@1f822600 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822600 0x50>;
+ interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
+ <171 IRQ_TYPE_LEVEL_HIGH>,
+ <172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ status = "disabled";
+ };
+
+ uart5: serial@1f822800 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822800 0x50>;
+ interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
+ <180 IRQ_TYPE_LEVEL_HIGH>,
+ <181 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ status = "disabled";
+ };
+
+ uart6: serial@1f822A00 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822A00 0x50>;
+ interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
+ <189 IRQ_TYPE_LEVEL_HIGH>,
+ <190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
new file mode 100644
index 000000000..d7fa5d55d
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Microchip Technology Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "pic32mzda.dtsi"
+
+/ {
+ compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda";
+ model = "Microchip PIC32MZDA Starter Kit";
+
+ memory {
+ device_type = "memory";
+ reg = <0x08000000 0x08000000>;
+ };
+
+ chosen {
+ bootargs = "earlyprintk=ttyPIC1,115200n8r console=ttyPIC1,115200n8";
+ };
+
+ leds0 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_s0>;
+
+ led@1 {
+ label = "pic32mzda_sk:red:led1";
+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ label = "pic32mzda_sk:yellow:led2";
+ gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ led@3 {
+ label = "pic32mzda_sk:green:led3";
+ gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ keys0 {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&user_buttons_s0>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@sw1 {
+ label = "ESC";
+ linux,code = <1>;
+ gpios = <&gpio1 12 0>;
+ };
+
+ button@sw2 {
+ label = "Home";
+ linux,code = <102>;
+ gpios = <&gpio1 13 0>;
+ };
+
+ button@sw3 {
+ label = "Menu";
+ linux,code = <139>;
+ gpios = <&gpio1 14 0>;
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&sdhci {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sdhc1>;
+ status = "okay";
+ assigned-clocks = <&rootclk REF2CLK>, <&rootclk REF4CLK>,
+ <&rootclk REF5CLK>;
+ assigned-clock-rates = <50000000>, <25000000>, <40000000>;
+};
+
+&pic32_pinctrl {
+
+ pinctrl_sdhc1: sdhc1_pins0 {
+ pins = "A6", "D4", "G13", "G12", "G14", "A7", "A0";
+ microchip,digital;
+ };
+
+ user_leds_s0: user_leds_s0 {
+ pins = "H0", "H1", "H2";
+ output-low;
+ microchip,digital;
+ };
+
+ user_buttons_s0: user_buttons_s0 {
+ pins = "B12", "B13", "B14";
+ microchip,digital;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pinctrl_uart2: pinctrl_uart2 {
+ uart2-tx {
+ pins = "G9";
+ function = "U2TX";
+ microchip,digital;
+ output-high;
+ };
+ uart2-rx {
+ pins = "B0";
+ function = "U2RX";
+ microchip,digital;
+ input-enable;
+ };
+ };
+
+ pinctrl_uart4: uart4-0 {
+ uart4-tx {
+ pins = "C3";
+ function = "U4TX";
+ microchip,digital;
+ output-high;
+ };
+ uart4-rx {
+ pins = "E8";
+ function = "U4RX";
+ microchip,digital;
+ input-enable;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
new file mode 100644
index 000000000..4451cf45b
--- /dev/null
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# All DTBs
+dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_ATH79) += ar9331_dpt_module.dtb
+dtb-$(CONFIG_ATH79) += ar9331_dragino_ms14.dtb
+dtb-$(CONFIG_ATH79) += ar9331_omega.dtb
+dtb-$(CONFIG_ATH79) += ar9331_tl_mr3020.dtb
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
new file mode 100644
index 000000000..61dcfa5b6
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+ compatible = "qca,ar9132";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+ <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar9132-ddr-controller",
+ "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: uart@18020000 {
+ compatible = "ns8250";
+ reg = <0x18020000 0x20>;
+ interrupts = <3>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "uart";
+
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ no-loopback-test;
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar9132-gpio",
+ "qca,ar7100-gpio";
+ reg = <0x18040000 0x30>;
+ interrupts = <2>;
+
+ ngpios = <22>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9132-pll",
+ "qca,ar9130-pll";
+ reg = <0x18050000 0x20>;
+
+ clock-names = "ref";
+ /* The board must provides the ref clock */
+
+ #clock-cells = <1>;
+ clock-output-names = "cpu", "ddr", "ahb";
+ };
+
+ wdt: wdt@18060008 {
+ compatible = "qca,ar7130-wdt";
+ reg = <0x18060008 0x8>;
+
+ interrupts = <4>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "wdt";
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar9132-misc-intc",
+ "qca,ar7100-misc-intc";
+ reg = <0x18060010 0x8>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar9132-reset",
+ "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+ };
+
+ usb: usb@1b000100 {
+ compatible = "qca,ar7100-ehci", "generic-ehci";
+ reg = <0x1b000100 0x100>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+
+ has-transaction-translator;
+
+ phy-names = "usb";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+
+ reset-names = "phy", "suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
new file mode 100644
index 000000000..7fccf6357
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9132.dtsi"
+
+/ {
+ compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+ model = "TP-Link TL-WR1043ND Version 1";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ extosc: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ button@1 {
+ label = "qss";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "tp-link:green:usb";
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led@1 {
+ label = "tp-link:green:system";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ label = "tp-link:green:qss";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@3 {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&pll {
+ clocks = <&extosc>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25sl064a";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ };
+
+ partition@1 {
+ label = "firmware";
+ reg = <0x020000 0x7D0000>;
+ };
+
+ partition@2 {
+ label = "art";
+ reg = <0x7F0000 0x010000>;
+ read-only;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 000000000..83b3c0ce1
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+ compatible = "qca,ar9331";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ clocks = <&pll ATH79_CLK_CPU>;
+ reg = <0>;
+ };
+ };
+
+ cpuintc: interrupt-controller {
+ compatible = "qca,ar7100-cpu-intc";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ qca,ddr-wb-channel-interrupts = <2>, <3>;
+ qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+ };
+
+ ref: ref {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&miscintc>;
+
+ ddr_ctrl: memory-controller@18000000 {
+ compatible = "qca,ar7240-ddr-controller";
+ reg = <0x18000000 0x100>;
+
+ #qca,ddr-wb-channel-cells = <1>;
+ };
+
+ uart: serial@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x14>;
+
+ interrupts = <3>;
+
+ clocks = <&ref>;
+ clock-names = "uart";
+
+ status = "disabled";
+ };
+
+ gpio: gpio@18040000 {
+ compatible = "qca,ar7100-gpio";
+ reg = <0x18040000 0x34>;
+ interrupts = <2>;
+
+ ngpios = <30>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ status = "disabled";
+ };
+
+ pll: pll-controller@18050000 {
+ compatible = "qca,ar9330-pll";
+ reg = <0x18050000 0x100>;
+
+ clocks = <&ref>;
+ clock-names = "ref";
+
+ #clock-cells = <1>;
+ };
+
+ miscintc: interrupt-controller@18060010 {
+ compatible = "qca,ar7240-misc-intc";
+ reg = <0x18060010 0x8>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ rst: reset-controller@1806001c {
+ compatible = "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
+ };
+
+ eth0: ethernet@19000000 {
+ compatible = "qca,ar9330-eth";
+ reg = <0x19000000 0x200>;
+ interrupts = <4>;
+
+ resets = <&rst 9>, <&rst 22>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
+
+ phy-mode = "mii";
+ phy-handle = <&phy_port4>;
+
+ status = "disabled";
+ };
+
+ eth1: ethernet@1a000000 {
+ compatible = "qca,ar9330-eth";
+ reg = <0x1a000000 0x200>;
+ interrupts = <5>;
+ resets = <&rst 13>, <&rst 23>;
+ reset-names = "mac", "mdio";
+ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+ clock-names = "eth", "mdio";
+
+ phy-mode = "gmii";
+
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch10: switch@10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qca,ar9331-switch";
+ reg = <0x10>;
+ resets = <&rst 8>;
+ reset-names = "switch";
+
+ interrupt-parent = <&miscintc>;
+ interrupts = <12>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch_port0: port@0 {
+ reg = <0x0>;
+ label = "cpu";
+ ethernet = <&eth1>;
+
+ phy-mode = "gmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ switch_port1: port@1 {
+ reg = <0x1>;
+ phy-handle = <&phy_port0>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port2: port@2 {
+ reg = <0x2>;
+ phy-handle = <&phy_port1>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port3: port@3 {
+ reg = <0x3>;
+ phy-handle = <&phy_port2>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+
+ switch_port4: port@4 {
+ reg = <0x4>;
+ phy-handle = <&phy_port3>;
+ phy-mode = "internal";
+
+ status = "disabled";
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&switch10>;
+
+ phy_port0: phy@0 {
+ reg = <0x0>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port1: phy@1 {
+ reg = <0x1>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port2: phy@2 {
+ reg = <0x2>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port3: phy@3 {
+ reg = <0x3>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+
+ phy_port4: phy@4 {
+ reg = <0x4>;
+ interrupts = <0>;
+ status = "disabled";
+ };
+ };
+ };
+ };
+ };
+
+ usb: usb@1b000100 {
+ compatible = "chipidea,usb2";
+ reg = <0x1b000000 0x200>;
+
+ interrupts = <3>;
+ resets = <&rst 5>;
+
+ phy-names = "usb-phy";
+ phys = <&usb_phy>;
+
+ status = "disabled";
+ };
+
+ spi: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+
+ clocks = <&pll ATH79_CLK_AHB>;
+ clock-names = "ahb";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+
+ reset-names = "phy", "suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
new file mode 100644
index 000000000..7695d326d
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "DPTechnics DPT-Module";
+ compatible = "dptechnics,dpt-module";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Winbond 25Q128FVSG SPI flash */
+ spiflash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+};
+
+&eth1 {
+ status = "okay";
+};
+
+&switch_port1 {
+ label = "lan0";
+ status = "okay";
+};
+
+&phy_port0 {
+ status = "okay";
+};
+
+&phy_port4 {
+ status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
new file mode 100644
index 000000000..d38aa73f1
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "Dragino MS14 (Dragino 2)";
+ compatible = "dragino,ms14";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "dragino2:red:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ lan {
+ label = "dragino2:red:lan";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wan {
+ label = "dragino2:red:wan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ system {
+ label = "dragino2:red:system";
+ gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "jumpstart";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Winbond 25Q128BVFG SPI flash */
+ spiflash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
new file mode 100644
index 000000000..11778abac
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "Onion Omega";
+ compatible = "onion,omega";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system {
+ label = "onion:amber:system";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Winbond 25Q128FVSG SPI flash */
+ spiflash: w25q128@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
new file mode 100644
index 000000000..c8290d36c
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+ model = "TP-Link TL-MR3020";
+ compatible = "tplink,tl-mr3020";
+
+ aliases {
+ serial0 = &uart;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "tp-link:green:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ lan {
+ label = "tp-link:green:lan";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ wps {
+ label = "tp-link:green:wps";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led3g {
+ label = "tp-link:green:3g";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@1 {
+ label = "sw1";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ button@2 {
+ label = "sw2";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_usb_vbus: reg_usb_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ref {
+ clock-frequency = <25000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb {
+ dr_mode = "host";
+ vbus-supply = <&reg_usb_vbus>;
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ num-chipselects = <1>;
+ status = "okay";
+
+ /* Spansion S25FL032PIF SPI flash */
+ spiflash: s25sl032p@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25sl032p", "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
new file mode 100644
index 000000000..6c26dfa0a
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
+dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
+dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
+dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
+dtb-$(CONFIG_DTB_OMEGA2P) += omega2p.dtb
+dtb-$(CONFIG_DTB_VOCORE2) += vocore2.dtb
+
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
new file mode 100644
index 000000000..6069b33cf
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Stefan Roese <sr@denx.de>
+ */
+
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
+ "ralink,mt7628a-soc";
+ model = "GARDENA smart Gateway (MT7688)";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */
+
+ user_btn1 {
+ label = "USER_BTN1";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,code =<KEY_PROG1> ;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */
+ <&pinmux_pwm1_gpio>, /* GPIO19 */
+ <&pinmux_sdmode_gpio>, /* GPIO22..29 */
+ <&pinmux_p0led_an_gpio>; /* GPIO43 */
+ /*
+ * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as
+ * well for GPIO3. But this is already claimed for uart1
+ * (see below). So we can't include it in this LED node.
+ */
+
+ power_blue {
+ label = "smartgw:power:blue";
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power_green {
+ label = "smartgw:power:green";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ power_red {
+ label = "smartgw:power:red";
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_blue {
+ label = "smartgw:radio:blue";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_green {
+ label = "smartgw:radio:green";
+ gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ radio_red {
+ label = "smartgw:radio:red";
+ gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_blue {
+ label = "smartgw:internet:blue";
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_green {
+ label = "smartgw:internet:green";
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ internet_red {
+ label = "smartgw:internet:red";
+ gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ ethernet_link {
+ label = "smartgw:eth:link";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ };
+
+ ethernet_activity {
+ label = "smartgw:eth:act";
+ gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "netdev";
+ };
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "uboot_env0";
+ reg = <0xa0000 0x10000>;
+ };
+
+ partition@b0000 {
+ label = "uboot_env1";
+ reg = <0xb0000 0x10000>;
+ };
+
+ factory: partition@c0000 {
+ label = "factory";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ nand_flash@1 {
+ compatible = "spi-nand";
+ linux,mtd-name = "gd5f";
+ reg = <1>;
+ spi-max-frequency = <40000000>;
+ };
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */
+
+ fifo-size = <8>;
+ tx-threshold = <8>;
+
+ rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */
+ <&pinmux_p3led_an_gpio>; /* GPIO40 */
+
+ rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+};
diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
new file mode 100644
index 000000000..1f6e5320f
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,mtk7620a-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ cpuintc: cpuintc {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,mt7620a-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
new file mode 100644
index 000000000..8de8f89f3
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+ model = "Ralink MT7620A evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
new file mode 100644
index 000000000..892e8ab86
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,mt7628a-soc";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "mti,mips24KEc";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ resetc: reset-controller {
+ compatible = "ralink,rt2880-reset";
+ #reset-cells = <1>;
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc: system-controller@0 {
+ compatible = "ralink,mt7620a-sysc", "syscon";
+ reg = <0x0 0x60>;
+ };
+
+ pinmux: pinmux@60 {
+ compatible = "pinctrl-single";
+ reg = <0x60 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+
+ pinmux_gpio_gpio: pinmux_gpio_gpio {
+ pinctrl-single,bits = <0x0 0x0 0x3>;
+ };
+
+ pinmux_spi_cs1_cs: pinmux_spi_cs1_cs {
+ pinctrl-single,bits = <0x0 0x0 0x30>;
+ };
+
+ pinmux_i2s_gpio: pinmux_i2s_gpio {
+ pinctrl-single,bits = <0x0 0x40 0xc0>;
+ };
+
+ pinmux_uart0_uart: pinmux_uart0_uart0 {
+ pinctrl-single,bits = <0x0 0x0 0x300>;
+ };
+
+ pinmux_sdmode_sdxc: pinmux_sdmode_sdxc {
+ pinctrl-single,bits = <0x0 0x0 0xc00>;
+ };
+
+ pinmux_sdmode_gpio: pinmux_sdmode_gpio {
+ pinctrl-single,bits = <0x0 0x400 0xc00>;
+ };
+
+ pinmux_spi_spi: pinmux_spi_spi {
+ pinctrl-single,bits = <0x0 0x0 0x1000>;
+ };
+
+ pinmux_refclk_gpio: pinmux_refclk_gpio {
+ pinctrl-single,bits = <0x0 0x40000 0x40000>;
+ };
+
+ pinmux_i2c_i2c: pinmux_i2c_i2c {
+ pinctrl-single,bits = <0x0 0x0 0x300000>;
+ };
+
+ pinmux_uart1_uart: pinmux_uart1_uart1 {
+ pinctrl-single,bits = <0x0 0x0 0x3000000>;
+ };
+
+ pinmux_uart2_uart: pinmux_uart2_uart {
+ pinctrl-single,bits = <0x0 0x0 0xc000000>;
+ };
+
+ pinmux_pwm0_pwm: pinmux_pwm0_pwm {
+ pinctrl-single,bits = <0x0 0x0 0x30000000>;
+ };
+
+ pinmux_pwm0_gpio: pinmux_pwm0_gpio {
+ pinctrl-single,bits = <0x0 0x10000000
+ 0x30000000>;
+ };
+
+ pinmux_pwm1_pwm: pinmux_pwm1_pwm {
+ pinctrl-single,bits = <0x0 0x0 0xc0000000>;
+ };
+
+ pinmux_pwm1_gpio: pinmux_pwm1_gpio {
+ pinctrl-single,bits = <0x0 0x40000000
+ 0xc0000000>;
+ };
+
+ pinmux_p0led_an_gpio: pinmux_p0led_an_gpio {
+ pinctrl-single,bits = <0x4 0x4 0xc>;
+ };
+
+ pinmux_p1led_an_gpio: pinmux_p1led_an_gpio {
+ pinctrl-single,bits = <0x4 0x10 0x30>;
+ };
+
+ pinmux_p2led_an_gpio: pinmux_p2led_an_gpio {
+ pinctrl-single,bits = <0x4 0x40 0xc0>;
+ };
+
+ pinmux_p3led_an_gpio: pinmux_p3led_an_gpio {
+ pinctrl-single,bits = <0x4 0x100 0x300>;
+ };
+
+ pinmux_p4led_an_gpio: pinmux_p4led_an_gpio {
+ pinctrl-single,bits = <0x4 0x400 0xc00>;
+ };
+ };
+
+ watchdog: watchdog@100 {
+ compatible = "mediatek,mt7621-wdt";
+ reg = <0x100 0x30>;
+
+ resets = <&resetc 8>;
+ reset-names = "wdt";
+
+ interrupt-parent = <&intc>;
+ interrupts = <24>;
+
+ status = "disabled";
+ };
+
+ intc: interrupt-controller@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ resets = <&resetc 9>;
+ reset-names = "intc";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+
+ ralink,intc-registers = <0x9c 0xa0
+ 0x6c 0xa4
+ 0x80 0x78>;
+ };
+
+ memory-controller@300 {
+ compatible = "ralink,mt7620a-memc";
+ reg = <0x300 0x100>;
+ };
+
+ gpio: gpio@600 {
+ compatible = "mediatek,mt7621-gpio";
+ reg = <0x600 0x100>;
+
+ gpio-controller;
+ interrupt-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <6>;
+ };
+
+ spi: spi@b00 {
+ compatible = "ralink,mt7621-spi";
+ reg = <0xb00 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_spi_spi>;
+
+ resets = <&resetc 18>;
+ reset-names = "spi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ i2c: i2c@900 {
+ compatible = "mediatek,mt7621-i2c";
+ reg = <0x900 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_i2c_i2c>;
+
+ resets = <&resetc 16>;
+ reset-names = "i2c";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart0: uartlite@c00 {
+ compatible = "ns16550a";
+ reg = <0xc00 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_uart0_uart>;
+
+ resets = <&resetc 12>;
+ reset-names = "uart0";
+
+ interrupt-parent = <&intc>;
+ interrupts = <20>;
+
+ reg-shift = <2>;
+ };
+
+ uart1: uart1@d00 {
+ compatible = "ns16550a";
+ reg = <0xd00 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_uart1_uart>;
+
+ resets = <&resetc 19>;
+ reset-names = "uart1";
+
+ interrupt-parent = <&intc>;
+ interrupts = <21>;
+
+ reg-shift = <2>;
+ };
+
+ uart2: uart2@e00 {
+ compatible = "ns16550a";
+ reg = <0xe00 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinmux_uart2_uart>;
+
+ resets = <&resetc 20>;
+ reset-names = "uart2";
+
+ interrupt-parent = <&intc>;
+ interrupts = <22>;
+
+ reg-shift = <2>;
+ };
+ };
+
+ usb_phy: usb-phy@10120000 {
+ compatible = "mediatek,mt7628-usbphy";
+ reg = <0x10120000 0x1000>;
+
+ #phy-cells = <0>;
+
+ ralink,sysctl = <&sysc>;
+ resets = <&resetc 22 &resetc 25>;
+ reset-names = "host", "device";
+ };
+
+ ehci@101c0000 {
+ compatible = "generic-ehci";
+ reg = <0x101c0000 0x1000>;
+
+ phys = <&usb_phy>;
+ phy-names = "usb";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
+
+ wmac: wmac@10300000 {
+ compatible = "mediatek,mt7628-wmac";
+ reg = <0x10300000 0x100000>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/omega2p.dts b/arch/mips/boot/dts/ralink/omega2p.dts
new file mode 100644
index 000000000..5884fd48f
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/omega2p.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+/include/ "mt7628a.dtsi"
+
+/ {
+ compatible = "onion,omega2+", "ralink,mt7688a-soc", "ralink,mt7628a-soc";
+ model = "Onion Omega2+";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
new file mode 100644
index 000000000..8fc1987d9
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt2880.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt2880-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips4KEc";
+ };
+ };
+
+ cpuintc: cpuintc {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@300000 {
+ compatible = "palmbus";
+ reg = <0x300000 0x200000>;
+ ranges = <0x0 0x300000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt2880-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt2880-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts
new file mode 100644
index 000000000..759bc1dd5
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt2880_eval.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+ model = "Ralink RT2880 evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x8000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x400000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
new file mode 100644
index 000000000..23062333a
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3050.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ cpuintc: cpuintc {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+
+ usb@101c0000 {
+ compatible = "ralink,rt3050-usb", "snps,dwc2";
+ reg = <0x101c0000 40000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+
+ status = "disabled";
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts
new file mode 100644
index 000000000..6408ff629
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3052_eval.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "rt3050.dtsi"
+
+/ {
+ compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
+ model = "Ralink RT3052 evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+
+ usb@101c0000 {
+ status = "okay";
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
new file mode 100644
index 000000000..61132cf15
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3883.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3883-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips74Kc";
+ };
+ };
+
+ cpuintc: cpuintc {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts
new file mode 100644
index 000000000..c22bc84df
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/rt3883_eval.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+ compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
+ model = "Ralink RT3883 evaluation board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
diff --git a/arch/mips/boot/dts/ralink/vocore2.dts b/arch/mips/boot/dts/ralink/vocore2.dts
new file mode 100644
index 000000000..fa8a5f8f2
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/vocore2.dts
@@ -0,0 +1,18 @@
+/dts-v1/;
+
+#include "mt7628a.dtsi"
+
+/ {
+ compatible = "vocore,vocore2", "ralink,mt7628a-soc";
+ model = "VoCore2";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS2,115200";
+ stdout-path = &uart2;
+ };
+};
diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
new file mode 100644
index 000000000..69ca00590
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += nexys4ddr.dtb
diff --git a/arch/mips/boot/dts/xilfpga/microAptiv.dtsi b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
new file mode 100644
index 000000000..87b2b1f9a
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "img,xilfpga";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,m14Kc";
+ clocks = <&ext>;
+ reg = <0>;
+ };
+ };
+
+ ext: ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+};
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
new file mode 100644
index 000000000..cc8dbea09
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+ compatible = "digilent,nexys4ddr";
+
+ aliases {
+ serial0 = &axi_uart16550;
+ };
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+
+ cpuintc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ axi_intc: interrupt-controller@10200000 {
+ #interrupt-cells = <1>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller;
+ reg = <0x10200000 0x10000>;
+ xlnx,kind-of-intr = <0x0>;
+ xlnx,num-intr-inputs = <0x6>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <6>;
+ };
+
+ axi_gpio: gpio@10600000 {
+ #gpio-cells = <1>;
+ compatible = "xlnx,xps-gpio-1.00.a";
+ gpio-controller;
+ reg = <0x10600000 0x10000>;
+ xlnx,all-inputs = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,gpio-width = <0x16>;
+ xlnx,interrupt-present = <0x0>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ } ;
+
+ axi_ethernetlite: ethernet@10e00000 {
+ compatible = "xlnx,xps-ethernetlite-3.00.a";
+ device_type = "network";
+ interrupt-parent = <&axi_intc>;
+ interrupts = <1>;
+ phy-handle = <&phy0>;
+ reg = <0x10e00000 0x10000>;
+ xlnx,duplex = <0x1>;
+ xlnx,include-global-buffers = <0x1>;
+ xlnx,include-internal-loopback = <0x0>;
+ xlnx,include-mdio = <0x1>;
+ xlnx,instance = "axi_ethernetlite_inst";
+ xlnx,rx-ping-pong = <0x1>;
+ xlnx,s-axi-id-width = <0x1>;
+ xlnx,tx-ping-pong = <0x1>;
+ xlnx,use-internal = <0x0>;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
+ };
+ };
+
+ axi_uart16550: serial@10400000 {
+ compatible = "ns16550a";
+ reg = <0x10400000 0x10000>;
+
+ reg-shift = <2>;
+ reg-offset = <0x1000>;
+
+ clocks = <&ext>;
+
+ interrupt-parent = <&axi_intc>;
+ interrupts = <0>;
+ };
+
+ axi_i2c: i2c@10a00000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&axi_intc>;
+ interrupts = <4>;
+ reg = < 0x10a00000 0x10000 >;
+ clocks = <&ext>;
+ xlnx,clk-freq = <0x5f5e100>;
+ xlnx,family = "Artix7";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ad7420@4b {
+ compatible = "adi,adt7420";
+ reg = <0x4b>;
+ };
+ } ;
+};
+
+&ext {
+ clock-frequency = <50000000>;
+};
diff --git a/arch/mips/boot/ecoff.h b/arch/mips/boot/ecoff.h
new file mode 100644
index 000000000..5be79ebfc
--- /dev/null
+++ b/arch/mips/boot/ecoff.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Some ECOFF definitions.
+ */
+
+#include <stdint.h>
+
+typedef struct filehdr {
+ uint16_t f_magic; /* magic number */
+ uint16_t f_nscns; /* number of sections */
+ int32_t f_timdat; /* time & date stamp */
+ int32_t f_symptr; /* file pointer to symbolic header */
+ int32_t f_nsyms; /* sizeof(symbolic hdr) */
+ uint16_t f_opthdr; /* sizeof(optional hdr) */
+ uint16_t f_flags; /* flags */
+} FILHDR;
+#define FILHSZ sizeof(FILHDR)
+
+#define MIPSEBMAGIC 0x160
+#define MIPSELMAGIC 0x162
+
+typedef struct scnhdr {
+ char s_name[8]; /* section name */
+ int32_t s_paddr; /* physical address, aliased s_nlib */
+ int32_t s_vaddr; /* virtual address */
+ int32_t s_size; /* section size */
+ int32_t s_scnptr; /* file ptr to raw data for section */
+ int32_t s_relptr; /* file ptr to relocation */
+ int32_t s_lnnoptr; /* file ptr to gp histogram */
+ uint16_t s_nreloc; /* number of relocation entries */
+ uint16_t s_nlnno; /* number of gp histogram entries */
+ int32_t s_flags; /* flags */
+} SCNHDR;
+#define SCNHSZ sizeof(SCNHDR)
+#define SCNROUND ((int32_t)16)
+
+typedef struct aouthdr {
+ int16_t magic; /* see above */
+ int16_t vstamp; /* version stamp */
+ int32_t tsize; /* text size in bytes, padded to DW bdry*/
+ int32_t dsize; /* initialized data " " */
+ int32_t bsize; /* uninitialized data " " */
+ int32_t entry; /* entry pt. */
+ int32_t text_start; /* base of text used for this file */
+ int32_t data_start; /* base of data used for this file */
+ int32_t bss_start; /* base of bss used for this file */
+ int32_t gprmask; /* general purpose register mask */
+ int32_t cprmask[4]; /* co-processor register masks */
+ int32_t gp_value; /* the gp value used for this object */
+} AOUTHDR;
+#define AOUTHSZ sizeof(AOUTHDR)
+
+#define OMAGIC 0407
+#define NMAGIC 0410
+#define ZMAGIC 0413
+#define SMAGIC 0411
+#define LIBMAGIC 0443
+
+#define N_TXTOFF(f, a) \
+ ((a).magic == ZMAGIC || (a).magic == LIBMAGIC ? 0 : \
+ ((a).vstamp < 23 ? \
+ ((FILHSZ + AOUTHSZ + (f).f_nscns * SCNHSZ + 7) & 0xfffffff8) : \
+ ((FILHSZ + AOUTHSZ + (f).f_nscns * SCNHSZ + SCNROUND-1) & ~(SCNROUND-1)) ) )
+#define N_DATOFF(f, a) \
+ N_TXTOFF(f, a) + (a).tsize;
diff --git a/arch/mips/boot/elf2ecoff.c b/arch/mips/boot/elf2ecoff.c
new file mode 100644
index 000000000..6972b9723
--- /dev/null
+++ b/arch/mips/boot/elf2ecoff.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright (c) 1995
+ * Ted Lemon (hereinafter referred to as the author)
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* elf2ecoff.c
+
+ This program converts an elf executable to an ECOFF executable.
+ No symbol table is retained. This is useful primarily in building
+ net-bootable kernels for machines (e.g., DECstation and Alpha) which
+ only support the ECOFF object file format. */
+
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <elf.h>
+#include <limits.h>
+#include <netinet/in.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+
+#include "ecoff.h"
+
+/*
+ * Some extra ELF definitions
+ */
+#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */
+#define PT_MIPS_ABIFLAGS 0x70000003 /* Records ABI related flags */
+
+/* -------------------------------------------------------------------- */
+
+struct sect {
+ uint32_t vaddr;
+ uint32_t len;
+};
+
+int *symTypeTable;
+int must_convert_endian;
+int format_bigendian;
+
+static void copy(int out, int in, off_t offset, off_t size)
+{
+ char ibuf[4096];
+ int remaining, cur, count;
+
+ /* Go to the start of the ELF symbol table... */
+ if (lseek(in, offset, SEEK_SET) < 0) {
+ perror("copy: lseek");
+ exit(1);
+ }
+
+ remaining = size;
+ while (remaining) {
+ cur = remaining;
+ if (cur > sizeof ibuf)
+ cur = sizeof ibuf;
+ remaining -= cur;
+ if ((count = read(in, ibuf, cur)) != cur) {
+ fprintf(stderr, "copy: read: %s\n",
+ count ? strerror(errno) :
+ "premature end of file");
+ exit(1);
+ }
+ if ((count = write(out, ibuf, cur)) != cur) {
+ perror("copy: write");
+ exit(1);
+ }
+ }
+}
+
+/*
+ * Combine two segments, which must be contiguous. If pad is true, it's
+ * okay for there to be padding between.
+ */
+static void combine(struct sect *base, struct sect *new, int pad)
+{
+ if (!base->len)
+ *base = *new;
+ else if (new->len) {
+ if (base->vaddr + base->len != new->vaddr) {
+ if (pad)
+ base->len = new->vaddr - base->vaddr;
+ else {
+ fprintf(stderr,
+ "Non-contiguous data can't be converted.\n");
+ exit(1);
+ }
+ }
+ base->len += new->len;
+ }
+}
+
+static int phcmp(const void *v1, const void *v2)
+{
+ const Elf32_Phdr *h1 = v1;
+ const Elf32_Phdr *h2 = v2;
+
+ if (h1->p_vaddr > h2->p_vaddr)
+ return 1;
+ else if (h1->p_vaddr < h2->p_vaddr)
+ return -1;
+ else
+ return 0;
+}
+
+static char *saveRead(int file, off_t offset, off_t len, char *name)
+{
+ char *tmp;
+ int count;
+ off_t off;
+ if ((off = lseek(file, offset, SEEK_SET)) < 0) {
+ fprintf(stderr, "%s: fseek: %s\n", name, strerror(errno));
+ exit(1);
+ }
+ if (!(tmp = (char *) malloc(len))) {
+ fprintf(stderr, "%s: Can't allocate %ld bytes.\n", name,
+ len);
+ exit(1);
+ }
+ count = read(file, tmp, len);
+ if (count != len) {
+ fprintf(stderr, "%s: read: %s.\n",
+ name,
+ count ? strerror(errno) : "End of file reached");
+ exit(1);
+ }
+ return tmp;
+}
+
+#define swab16(x) \
+ ((uint16_t)( \
+ (((uint16_t)(x) & (uint16_t)0x00ffU) << 8) | \
+ (((uint16_t)(x) & (uint16_t)0xff00U) >> 8) ))
+
+#define swab32(x) \
+ ((unsigned int)( \
+ (((uint32_t)(x) & (uint32_t)0x000000ffUL) << 24) | \
+ (((uint32_t)(x) & (uint32_t)0x0000ff00UL) << 8) | \
+ (((uint32_t)(x) & (uint32_t)0x00ff0000UL) >> 8) | \
+ (((uint32_t)(x) & (uint32_t)0xff000000UL) >> 24) ))
+
+static void convert_elf_hdr(Elf32_Ehdr * e)
+{
+ e->e_type = swab16(e->e_type);
+ e->e_machine = swab16(e->e_machine);
+ e->e_version = swab32(e->e_version);
+ e->e_entry = swab32(e->e_entry);
+ e->e_phoff = swab32(e->e_phoff);
+ e->e_shoff = swab32(e->e_shoff);
+ e->e_flags = swab32(e->e_flags);
+ e->e_ehsize = swab16(e->e_ehsize);
+ e->e_phentsize = swab16(e->e_phentsize);
+ e->e_phnum = swab16(e->e_phnum);
+ e->e_shentsize = swab16(e->e_shentsize);
+ e->e_shnum = swab16(e->e_shnum);
+ e->e_shstrndx = swab16(e->e_shstrndx);
+}
+
+static void convert_elf_phdrs(Elf32_Phdr * p, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++, p++) {
+ p->p_type = swab32(p->p_type);
+ p->p_offset = swab32(p->p_offset);
+ p->p_vaddr = swab32(p->p_vaddr);
+ p->p_paddr = swab32(p->p_paddr);
+ p->p_filesz = swab32(p->p_filesz);
+ p->p_memsz = swab32(p->p_memsz);
+ p->p_flags = swab32(p->p_flags);
+ p->p_align = swab32(p->p_align);
+ }
+
+}
+
+static void convert_elf_shdrs(Elf32_Shdr * s, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++, s++) {
+ s->sh_name = swab32(s->sh_name);
+ s->sh_type = swab32(s->sh_type);
+ s->sh_flags = swab32(s->sh_flags);
+ s->sh_addr = swab32(s->sh_addr);
+ s->sh_offset = swab32(s->sh_offset);
+ s->sh_size = swab32(s->sh_size);
+ s->sh_link = swab32(s->sh_link);
+ s->sh_info = swab32(s->sh_info);
+ s->sh_addralign = swab32(s->sh_addralign);
+ s->sh_entsize = swab32(s->sh_entsize);
+ }
+}
+
+static void convert_ecoff_filehdr(struct filehdr *f)
+{
+ f->f_magic = swab16(f->f_magic);
+ f->f_nscns = swab16(f->f_nscns);
+ f->f_timdat = swab32(f->f_timdat);
+ f->f_symptr = swab32(f->f_symptr);
+ f->f_nsyms = swab32(f->f_nsyms);
+ f->f_opthdr = swab16(f->f_opthdr);
+ f->f_flags = swab16(f->f_flags);
+}
+
+static void convert_ecoff_aouthdr(struct aouthdr *a)
+{
+ a->magic = swab16(a->magic);
+ a->vstamp = swab16(a->vstamp);
+ a->tsize = swab32(a->tsize);
+ a->dsize = swab32(a->dsize);
+ a->bsize = swab32(a->bsize);
+ a->entry = swab32(a->entry);
+ a->text_start = swab32(a->text_start);
+ a->data_start = swab32(a->data_start);
+ a->bss_start = swab32(a->bss_start);
+ a->gprmask = swab32(a->gprmask);
+ a->cprmask[0] = swab32(a->cprmask[0]);
+ a->cprmask[1] = swab32(a->cprmask[1]);
+ a->cprmask[2] = swab32(a->cprmask[2]);
+ a->cprmask[3] = swab32(a->cprmask[3]);
+ a->gp_value = swab32(a->gp_value);
+}
+
+static void convert_ecoff_esecs(struct scnhdr *s, int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++, s++) {
+ s->s_paddr = swab32(s->s_paddr);
+ s->s_vaddr = swab32(s->s_vaddr);
+ s->s_size = swab32(s->s_size);
+ s->s_scnptr = swab32(s->s_scnptr);
+ s->s_relptr = swab32(s->s_relptr);
+ s->s_lnnoptr = swab32(s->s_lnnoptr);
+ s->s_nreloc = swab16(s->s_nreloc);
+ s->s_nlnno = swab16(s->s_nlnno);
+ s->s_flags = swab32(s->s_flags);
+ }
+}
+
+int main(int argc, char *argv[])
+{
+ Elf32_Ehdr ex;
+ Elf32_Phdr *ph;
+ Elf32_Shdr *sh;
+ int i, pad;
+ struct sect text, data, bss;
+ struct filehdr efh;
+ struct aouthdr eah;
+ struct scnhdr esecs[6];
+ int infile, outfile;
+ uint32_t cur_vma = UINT32_MAX;
+ int addflag = 0;
+ int nosecs;
+
+ text.len = data.len = bss.len = 0;
+ text.vaddr = data.vaddr = bss.vaddr = 0;
+
+ /* Check args... */
+ if (argc < 3 || argc > 4) {
+ usage:
+ fprintf(stderr,
+ "usage: elf2ecoff <elf executable> <ecoff executable> [-a]\n");
+ exit(1);
+ }
+ if (argc == 4) {
+ if (strcmp(argv[3], "-a"))
+ goto usage;
+ addflag = 1;
+ }
+
+ /* Try the input file... */
+ if ((infile = open(argv[1], O_RDONLY)) < 0) {
+ fprintf(stderr, "Can't open %s for read: %s\n",
+ argv[1], strerror(errno));
+ exit(1);
+ }
+
+ /* Read the header, which is at the beginning of the file... */
+ i = read(infile, &ex, sizeof ex);
+ if (i != sizeof ex) {
+ fprintf(stderr, "ex: %s: %s.\n",
+ argv[1],
+ i ? strerror(errno) : "End of file reached");
+ exit(1);
+ }
+
+ if (ex.e_ident[EI_DATA] == ELFDATA2MSB)
+ format_bigendian = 1;
+
+ if (ntohs(0xaa55) == 0xaa55) {
+ if (!format_bigendian)
+ must_convert_endian = 1;
+ } else {
+ if (format_bigendian)
+ must_convert_endian = 1;
+ }
+ if (must_convert_endian)
+ convert_elf_hdr(&ex);
+
+ /* Read the program headers... */
+ ph = (Elf32_Phdr *) saveRead(infile, ex.e_phoff,
+ ex.e_phnum * sizeof(Elf32_Phdr),
+ "ph");
+ if (must_convert_endian)
+ convert_elf_phdrs(ph, ex.e_phnum);
+ /* Read the section headers... */
+ sh = (Elf32_Shdr *) saveRead(infile, ex.e_shoff,
+ ex.e_shnum * sizeof(Elf32_Shdr),
+ "sh");
+ if (must_convert_endian)
+ convert_elf_shdrs(sh, ex.e_shnum);
+
+ /* Figure out if we can cram the program header into an ECOFF
+ header... Basically, we can't handle anything but loadable
+ segments, but we can ignore some kinds of segments. We can't
+ handle holes in the address space. Segments may be out of order,
+ so we sort them first. */
+
+ qsort(ph, ex.e_phnum, sizeof(Elf32_Phdr), phcmp);
+
+ for (i = 0; i < ex.e_phnum; i++) {
+ /* Section types we can ignore... */
+ switch (ph[i].p_type) {
+ case PT_NULL:
+ case PT_NOTE:
+ case PT_PHDR:
+ case PT_MIPS_REGINFO:
+ case PT_MIPS_ABIFLAGS:
+ continue;
+
+ case PT_LOAD:
+ /* Writable (data) segment? */
+ if (ph[i].p_flags & PF_W) {
+ struct sect ndata, nbss;
+
+ ndata.vaddr = ph[i].p_vaddr;
+ ndata.len = ph[i].p_filesz;
+ nbss.vaddr = ph[i].p_vaddr + ph[i].p_filesz;
+ nbss.len = ph[i].p_memsz - ph[i].p_filesz;
+
+ combine(&data, &ndata, 0);
+ combine(&bss, &nbss, 1);
+ } else {
+ struct sect ntxt;
+
+ ntxt.vaddr = ph[i].p_vaddr;
+ ntxt.len = ph[i].p_filesz;
+
+ combine(&text, &ntxt, 0);
+ }
+ /* Remember the lowest segment start address. */
+ if (ph[i].p_vaddr < cur_vma)
+ cur_vma = ph[i].p_vaddr;
+ break;
+
+ default:
+ /* Section types we can't handle... */
+ fprintf(stderr,
+ "Program header %d type %d can't be converted.\n",
+ ex.e_phnum, ph[i].p_type);
+ exit(1);
+ }
+ }
+
+ /* Sections must be in order to be converted... */
+ if (text.vaddr > data.vaddr || data.vaddr > bss.vaddr ||
+ text.vaddr + text.len > data.vaddr
+ || data.vaddr + data.len > bss.vaddr) {
+ fprintf(stderr,
+ "Sections ordering prevents a.out conversion.\n");
+ exit(1);
+ }
+
+ /* If there's a data section but no text section, then the loader
+ combined everything into one section. That needs to be the
+ text section, so just make the data section zero length following
+ text. */
+ if (data.len && !text.len) {
+ text = data;
+ data.vaddr = text.vaddr + text.len;
+ data.len = 0;
+ }
+
+ /* If there is a gap between text and data, we'll fill it when we copy
+ the data, so update the length of the text segment as represented in
+ a.out to reflect that, since a.out doesn't allow gaps in the program
+ address space. */
+ if (text.vaddr + text.len < data.vaddr)
+ text.len = data.vaddr - text.vaddr;
+
+ /* We now have enough information to cons up an a.out header... */
+ eah.magic = OMAGIC;
+ eah.vstamp = 200;
+ eah.tsize = text.len;
+ eah.dsize = data.len;
+ eah.bsize = bss.len;
+ eah.entry = ex.e_entry;
+ eah.text_start = text.vaddr;
+ eah.data_start = data.vaddr;
+ eah.bss_start = bss.vaddr;
+ eah.gprmask = 0xf3fffffe;
+ memset(&eah.cprmask, '\0', sizeof eah.cprmask);
+ eah.gp_value = 0; /* unused. */
+
+ if (format_bigendian)
+ efh.f_magic = MIPSEBMAGIC;
+ else
+ efh.f_magic = MIPSELMAGIC;
+ if (addflag)
+ nosecs = 6;
+ else
+ nosecs = 3;
+ efh.f_nscns = nosecs;
+ efh.f_timdat = 0; /* bogus */
+ efh.f_symptr = 0;
+ efh.f_nsyms = 0;
+ efh.f_opthdr = sizeof eah;
+ efh.f_flags = 0x100f; /* Stripped, not sharable. */
+
+ memset(esecs, 0, sizeof esecs);
+ strcpy(esecs[0].s_name, ".text");
+ strcpy(esecs[1].s_name, ".data");
+ strcpy(esecs[2].s_name, ".bss");
+ if (addflag) {
+ strcpy(esecs[3].s_name, ".rdata");
+ strcpy(esecs[4].s_name, ".sdata");
+ strcpy(esecs[5].s_name, ".sbss");
+ }
+ esecs[0].s_paddr = esecs[0].s_vaddr = eah.text_start;
+ esecs[1].s_paddr = esecs[1].s_vaddr = eah.data_start;
+ esecs[2].s_paddr = esecs[2].s_vaddr = eah.bss_start;
+ if (addflag) {
+ esecs[3].s_paddr = esecs[3].s_vaddr = 0;
+ esecs[4].s_paddr = esecs[4].s_vaddr = 0;
+ esecs[5].s_paddr = esecs[5].s_vaddr = 0;
+ }
+ esecs[0].s_size = eah.tsize;
+ esecs[1].s_size = eah.dsize;
+ esecs[2].s_size = eah.bsize;
+ if (addflag) {
+ esecs[3].s_size = 0;
+ esecs[4].s_size = 0;
+ esecs[5].s_size = 0;
+ }
+ esecs[0].s_scnptr = N_TXTOFF(efh, eah);
+ esecs[1].s_scnptr = N_DATOFF(efh, eah);
+#define ECOFF_SEGMENT_ALIGNMENT(a) 0x10
+#define ECOFF_ROUND(s, a) (((s)+(a)-1)&~((a)-1))
+ esecs[2].s_scnptr = esecs[1].s_scnptr +
+ ECOFF_ROUND(esecs[1].s_size, ECOFF_SEGMENT_ALIGNMENT(&eah));
+ if (addflag) {
+ esecs[3].s_scnptr = 0;
+ esecs[4].s_scnptr = 0;
+ esecs[5].s_scnptr = 0;
+ }
+ esecs[0].s_relptr = esecs[1].s_relptr = esecs[2].s_relptr = 0;
+ esecs[0].s_lnnoptr = esecs[1].s_lnnoptr = esecs[2].s_lnnoptr = 0;
+ esecs[0].s_nreloc = esecs[1].s_nreloc = esecs[2].s_nreloc = 0;
+ esecs[0].s_nlnno = esecs[1].s_nlnno = esecs[2].s_nlnno = 0;
+ if (addflag) {
+ esecs[3].s_relptr = esecs[4].s_relptr
+ = esecs[5].s_relptr = 0;
+ esecs[3].s_lnnoptr = esecs[4].s_lnnoptr
+ = esecs[5].s_lnnoptr = 0;
+ esecs[3].s_nreloc = esecs[4].s_nreloc = esecs[5].s_nreloc =
+ 0;
+ esecs[3].s_nlnno = esecs[4].s_nlnno = esecs[5].s_nlnno = 0;
+ }
+ esecs[0].s_flags = 0x20;
+ esecs[1].s_flags = 0x40;
+ esecs[2].s_flags = 0x82;
+ if (addflag) {
+ esecs[3].s_flags = 0x100;
+ esecs[4].s_flags = 0x200;
+ esecs[5].s_flags = 0x400;
+ }
+
+ /* Make the output file... */
+ if ((outfile = open(argv[2], O_WRONLY | O_CREAT, 0777)) < 0) {
+ fprintf(stderr, "Unable to create %s: %s\n", argv[2],
+ strerror(errno));
+ exit(1);
+ }
+
+ if (must_convert_endian)
+ convert_ecoff_filehdr(&efh);
+ /* Write the headers... */
+ i = write(outfile, &efh, sizeof efh);
+ if (i != sizeof efh) {
+ perror("efh: write");
+ exit(1);
+
+ for (i = 0; i < nosecs; i++) {
+ printf
+ ("Section %d: %s phys %"PRIx32" size %"PRIx32"\t file offset %"PRIx32"\n",
+ i, esecs[i].s_name, esecs[i].s_paddr,
+ esecs[i].s_size, esecs[i].s_scnptr);
+ }
+ }
+ fprintf(stderr, "wrote %d byte file header.\n", i);
+
+ if (must_convert_endian)
+ convert_ecoff_aouthdr(&eah);
+ i = write(outfile, &eah, sizeof eah);
+ if (i != sizeof eah) {
+ perror("eah: write");
+ exit(1);
+ }
+ fprintf(stderr, "wrote %d byte a.out header.\n", i);
+
+ if (must_convert_endian)
+ convert_ecoff_esecs(&esecs[0], nosecs);
+ i = write(outfile, &esecs, nosecs * sizeof(struct scnhdr));
+ if (i != nosecs * sizeof(struct scnhdr)) {
+ perror("esecs: write");
+ exit(1);
+ }
+ fprintf(stderr, "wrote %d bytes of section headers.\n", i);
+
+ pad = (sizeof(efh) + sizeof(eah) + nosecs * sizeof(struct scnhdr)) & 15;
+ if (pad) {
+ pad = 16 - pad;
+ i = write(outfile, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0", pad);
+ if (i < 0) {
+ perror("ipad: write");
+ exit(1);
+ }
+ fprintf(stderr, "wrote %d byte pad.\n", i);
+ }
+
+ /*
+ * Copy the loadable sections. Zero-fill any gaps less than 64k;
+ * complain about any zero-filling, and die if we're asked to zero-fill
+ * more than 64k.
+ */
+ for (i = 0; i < ex.e_phnum; i++) {
+ /* Unprocessable sections were handled above, so just verify that
+ the section can be loaded before copying. */
+ if (ph[i].p_type == PT_LOAD && ph[i].p_filesz) {
+ if (cur_vma != ph[i].p_vaddr) {
+ uint32_t gap = ph[i].p_vaddr - cur_vma;
+ char obuf[1024];
+ if (gap > 65536) {
+ fprintf(stderr,
+ "Intersegment gap (%"PRId32" bytes) too large.\n",
+ gap);
+ exit(1);
+ }
+ fprintf(stderr,
+ "Warning: %d byte intersegment gap.\n",
+ gap);
+ memset(obuf, 0, sizeof obuf);
+ while (gap) {
+ int count =
+ write(outfile, obuf,
+ (gap >
+ sizeof obuf ? sizeof
+ obuf : gap));
+ if (count < 0) {
+ fprintf(stderr,
+ "Error writing gap: %s\n",
+ strerror(errno));
+ exit(1);
+ }
+ gap -= count;
+ }
+ }
+ fprintf(stderr, "writing %d bytes...\n",
+ ph[i].p_filesz);
+ copy(outfile, infile, ph[i].p_offset,
+ ph[i].p_filesz);
+ cur_vma = ph[i].p_vaddr + ph[i].p_filesz;
+ }
+ }
+
+ /*
+ * Write a page of padding for boot PROMS that read entire pages.
+ * Without this, they may attempt to read past the end of the
+ * data section, incur an error, and refuse to boot.
+ */
+ {
+ char obuf[4096];
+ memset(obuf, 0, sizeof obuf);
+ if (write(outfile, obuf, sizeof(obuf)) != sizeof(obuf)) {
+ fprintf(stderr, "Error writing PROM padding: %s\n",
+ strerror(errno));
+ exit(1);
+ }
+ }
+
+ /* Looks like we won... */
+ exit(0);
+}
diff --git a/arch/mips/boot/tools/.gitignore b/arch/mips/boot/tools/.gitignore
new file mode 100644
index 000000000..d36dc7cf9
--- /dev/null
+++ b/arch/mips/boot/tools/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+relocs
diff --git a/arch/mips/boot/tools/Makefile b/arch/mips/boot/tools/Makefile
new file mode 100644
index 000000000..592e05a51
--- /dev/null
+++ b/arch/mips/boot/tools/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+
+hostprogs += relocs
+relocs-objs += relocs_32.o
+relocs-objs += relocs_64.o
+relocs-objs += relocs_main.o
+PHONY += relocs
+relocs: $(obj)/relocs
+ @:
diff --git a/arch/mips/boot/tools/relocs.c b/arch/mips/boot/tools/relocs.c
new file mode 100644
index 000000000..1bf53f352
--- /dev/null
+++ b/arch/mips/boot/tools/relocs.c
@@ -0,0 +1,681 @@
+// SPDX-License-Identifier: GPL-2.0
+/* This is included from relocs_32/64.c */
+
+#define ElfW(type) _ElfW(ELF_BITS, type)
+#define _ElfW(bits, type) __ElfW(bits, type)
+#define __ElfW(bits, type) Elf##bits##_##type
+
+#define Elf_Addr ElfW(Addr)
+#define Elf_Ehdr ElfW(Ehdr)
+#define Elf_Phdr ElfW(Phdr)
+#define Elf_Shdr ElfW(Shdr)
+#define Elf_Sym ElfW(Sym)
+
+static Elf_Ehdr ehdr;
+
+struct relocs {
+ uint32_t *offset;
+ unsigned long count;
+ unsigned long size;
+};
+
+static struct relocs relocs;
+
+struct section {
+ Elf_Shdr shdr;
+ struct section *link;
+ Elf_Sym *symtab;
+ Elf_Rel *reltab;
+ char *strtab;
+ long shdr_offset;
+};
+static struct section *secs;
+
+static const char * const regex_sym_kernel = {
+/* Symbols matching these regex's should never be relocated */
+ "^(__crc_)",
+};
+
+static regex_t sym_regex_c;
+
+static int regex_skip_reloc(const char *sym_name)
+{
+ return !regexec(&sym_regex_c, sym_name, 0, NULL, 0);
+}
+
+static void regex_init(void)
+{
+ char errbuf[128];
+ int err;
+
+ err = regcomp(&sym_regex_c, regex_sym_kernel,
+ REG_EXTENDED|REG_NOSUB);
+
+ if (err) {
+ regerror(err, &sym_regex_c, errbuf, sizeof(errbuf));
+ die("%s", errbuf);
+ }
+}
+
+static const char *rel_type(unsigned type)
+{
+ static const char * const type_name[] = {
+#define REL_TYPE(X)[X] = #X
+ REL_TYPE(R_MIPS_NONE),
+ REL_TYPE(R_MIPS_16),
+ REL_TYPE(R_MIPS_32),
+ REL_TYPE(R_MIPS_REL32),
+ REL_TYPE(R_MIPS_26),
+ REL_TYPE(R_MIPS_HI16),
+ REL_TYPE(R_MIPS_LO16),
+ REL_TYPE(R_MIPS_GPREL16),
+ REL_TYPE(R_MIPS_LITERAL),
+ REL_TYPE(R_MIPS_GOT16),
+ REL_TYPE(R_MIPS_PC16),
+ REL_TYPE(R_MIPS_CALL16),
+ REL_TYPE(R_MIPS_GPREL32),
+ REL_TYPE(R_MIPS_64),
+ REL_TYPE(R_MIPS_HIGHER),
+ REL_TYPE(R_MIPS_HIGHEST),
+ REL_TYPE(R_MIPS_PC21_S2),
+ REL_TYPE(R_MIPS_PC26_S2),
+#undef REL_TYPE
+ };
+ const char *name = "unknown type rel type name";
+
+ if (type < ARRAY_SIZE(type_name) && type_name[type])
+ name = type_name[type];
+ return name;
+}
+
+static const char *sec_name(unsigned shndx)
+{
+ const char *sec_strtab;
+ const char *name;
+
+ sec_strtab = secs[ehdr.e_shstrndx].strtab;
+ if (shndx < ehdr.e_shnum)
+ name = sec_strtab + secs[shndx].shdr.sh_name;
+ else if (shndx == SHN_ABS)
+ name = "ABSOLUTE";
+ else if (shndx == SHN_COMMON)
+ name = "COMMON";
+ else
+ name = "<noname>";
+ return name;
+}
+
+static struct section *sec_lookup(const char *secname)
+{
+ int i;
+
+ for (i = 0; i < ehdr.e_shnum; i++)
+ if (strcmp(secname, sec_name(i)) == 0)
+ return &secs[i];
+
+ return NULL;
+}
+
+static const char *sym_name(const char *sym_strtab, Elf_Sym *sym)
+{
+ const char *name;
+
+ if (sym->st_name)
+ name = sym_strtab + sym->st_name;
+ else
+ name = sec_name(sym->st_shndx);
+ return name;
+}
+
+#if BYTE_ORDER == LITTLE_ENDIAN
+#define le16_to_cpu(val) (val)
+#define le32_to_cpu(val) (val)
+#define le64_to_cpu(val) (val)
+#define be16_to_cpu(val) bswap_16(val)
+#define be32_to_cpu(val) bswap_32(val)
+#define be64_to_cpu(val) bswap_64(val)
+
+#define cpu_to_le16(val) (val)
+#define cpu_to_le32(val) (val)
+#define cpu_to_le64(val) (val)
+#define cpu_to_be16(val) bswap_16(val)
+#define cpu_to_be32(val) bswap_32(val)
+#define cpu_to_be64(val) bswap_64(val)
+#endif
+#if BYTE_ORDER == BIG_ENDIAN
+#define le16_to_cpu(val) bswap_16(val)
+#define le32_to_cpu(val) bswap_32(val)
+#define le64_to_cpu(val) bswap_64(val)
+#define be16_to_cpu(val) (val)
+#define be32_to_cpu(val) (val)
+#define be64_to_cpu(val) (val)
+
+#define cpu_to_le16(val) bswap_16(val)
+#define cpu_to_le32(val) bswap_32(val)
+#define cpu_to_le64(val) bswap_64(val)
+#define cpu_to_be16(val) (val)
+#define cpu_to_be32(val) (val)
+#define cpu_to_be64(val) (val)
+#endif
+
+static uint16_t elf16_to_cpu(uint16_t val)
+{
+ if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+ return le16_to_cpu(val);
+ else
+ return be16_to_cpu(val);
+}
+
+static uint32_t elf32_to_cpu(uint32_t val)
+{
+ if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+ return le32_to_cpu(val);
+ else
+ return be32_to_cpu(val);
+}
+
+static uint32_t cpu_to_elf32(uint32_t val)
+{
+ if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+ return cpu_to_le32(val);
+ else
+ return cpu_to_be32(val);
+}
+
+#define elf_half_to_cpu(x) elf16_to_cpu(x)
+#define elf_word_to_cpu(x) elf32_to_cpu(x)
+
+#if ELF_BITS == 64
+static uint64_t elf64_to_cpu(uint64_t val)
+{
+ if (ehdr.e_ident[EI_DATA] == ELFDATA2LSB)
+ return le64_to_cpu(val);
+ else
+ return be64_to_cpu(val);
+}
+#define elf_addr_to_cpu(x) elf64_to_cpu(x)
+#define elf_off_to_cpu(x) elf64_to_cpu(x)
+#define elf_xword_to_cpu(x) elf64_to_cpu(x)
+#else
+#define elf_addr_to_cpu(x) elf32_to_cpu(x)
+#define elf_off_to_cpu(x) elf32_to_cpu(x)
+#define elf_xword_to_cpu(x) elf32_to_cpu(x)
+#endif
+
+static void read_ehdr(FILE *fp)
+{
+ if (fread(&ehdr, sizeof(ehdr), 1, fp) != 1)
+ die("Cannot read ELF header: %s\n", strerror(errno));
+
+ if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0)
+ die("No ELF magic\n");
+
+ if (ehdr.e_ident[EI_CLASS] != ELF_CLASS)
+ die("Not a %d bit executable\n", ELF_BITS);
+
+ if ((ehdr.e_ident[EI_DATA] != ELFDATA2LSB) &&
+ (ehdr.e_ident[EI_DATA] != ELFDATA2MSB))
+ die("Unknown ELF Endianness\n");
+
+ if (ehdr.e_ident[EI_VERSION] != EV_CURRENT)
+ die("Unknown ELF version\n");
+
+ /* Convert the fields to native endian */
+ ehdr.e_type = elf_half_to_cpu(ehdr.e_type);
+ ehdr.e_machine = elf_half_to_cpu(ehdr.e_machine);
+ ehdr.e_version = elf_word_to_cpu(ehdr.e_version);
+ ehdr.e_entry = elf_addr_to_cpu(ehdr.e_entry);
+ ehdr.e_phoff = elf_off_to_cpu(ehdr.e_phoff);
+ ehdr.e_shoff = elf_off_to_cpu(ehdr.e_shoff);
+ ehdr.e_flags = elf_word_to_cpu(ehdr.e_flags);
+ ehdr.e_ehsize = elf_half_to_cpu(ehdr.e_ehsize);
+ ehdr.e_phentsize = elf_half_to_cpu(ehdr.e_phentsize);
+ ehdr.e_phnum = elf_half_to_cpu(ehdr.e_phnum);
+ ehdr.e_shentsize = elf_half_to_cpu(ehdr.e_shentsize);
+ ehdr.e_shnum = elf_half_to_cpu(ehdr.e_shnum);
+ ehdr.e_shstrndx = elf_half_to_cpu(ehdr.e_shstrndx);
+
+ if ((ehdr.e_type != ET_EXEC) && (ehdr.e_type != ET_DYN))
+ die("Unsupported ELF header type\n");
+
+ if (ehdr.e_machine != ELF_MACHINE)
+ die("Not for %s\n", ELF_MACHINE_NAME);
+
+ if (ehdr.e_version != EV_CURRENT)
+ die("Unknown ELF version\n");
+
+ if (ehdr.e_ehsize != sizeof(Elf_Ehdr))
+ die("Bad Elf header size\n");
+
+ if (ehdr.e_phentsize != sizeof(Elf_Phdr))
+ die("Bad program header entry\n");
+
+ if (ehdr.e_shentsize != sizeof(Elf_Shdr))
+ die("Bad section header entry\n");
+
+ if (ehdr.e_shstrndx >= ehdr.e_shnum)
+ die("String table index out of bounds\n");
+}
+
+static void read_shdrs(FILE *fp)
+{
+ int i;
+ Elf_Shdr shdr;
+
+ secs = calloc(ehdr.e_shnum, sizeof(struct section));
+ if (!secs)
+ die("Unable to allocate %d section headers\n", ehdr.e_shnum);
+
+ if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0)
+ die("Seek to %d failed: %s\n", ehdr.e_shoff, strerror(errno));
+
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ struct section *sec = &secs[i];
+
+ sec->shdr_offset = ftell(fp);
+ if (fread(&shdr, sizeof(shdr), 1, fp) != 1)
+ die("Cannot read ELF section headers %d/%d: %s\n",
+ i, ehdr.e_shnum, strerror(errno));
+ sec->shdr.sh_name = elf_word_to_cpu(shdr.sh_name);
+ sec->shdr.sh_type = elf_word_to_cpu(shdr.sh_type);
+ sec->shdr.sh_flags = elf_xword_to_cpu(shdr.sh_flags);
+ sec->shdr.sh_addr = elf_addr_to_cpu(shdr.sh_addr);
+ sec->shdr.sh_offset = elf_off_to_cpu(shdr.sh_offset);
+ sec->shdr.sh_size = elf_xword_to_cpu(shdr.sh_size);
+ sec->shdr.sh_link = elf_word_to_cpu(shdr.sh_link);
+ sec->shdr.sh_info = elf_word_to_cpu(shdr.sh_info);
+ sec->shdr.sh_addralign = elf_xword_to_cpu(shdr.sh_addralign);
+ sec->shdr.sh_entsize = elf_xword_to_cpu(shdr.sh_entsize);
+ if (sec->shdr.sh_link < ehdr.e_shnum)
+ sec->link = &secs[sec->shdr.sh_link];
+ }
+}
+
+static void read_strtabs(FILE *fp)
+{
+ int i;
+
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ struct section *sec = &secs[i];
+
+ if (sec->shdr.sh_type != SHT_STRTAB)
+ continue;
+
+ sec->strtab = malloc(sec->shdr.sh_size);
+ if (!sec->strtab)
+ die("malloc of %d bytes for strtab failed\n",
+ sec->shdr.sh_size);
+
+ if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0)
+ die("Seek to %d failed: %s\n",
+ sec->shdr.sh_offset, strerror(errno));
+
+ if (fread(sec->strtab, 1, sec->shdr.sh_size, fp) !=
+ sec->shdr.sh_size)
+ die("Cannot read symbol table: %s\n", strerror(errno));
+ }
+}
+
+static void read_symtabs(FILE *fp)
+{
+ int i, j;
+
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ struct section *sec = &secs[i];
+ if (sec->shdr.sh_type != SHT_SYMTAB)
+ continue;
+
+ sec->symtab = malloc(sec->shdr.sh_size);
+ if (!sec->symtab)
+ die("malloc of %d bytes for symtab failed\n",
+ sec->shdr.sh_size);
+
+ if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0)
+ die("Seek to %d failed: %s\n",
+ sec->shdr.sh_offset, strerror(errno));
+
+ if (fread(sec->symtab, 1, sec->shdr.sh_size, fp) !=
+ sec->shdr.sh_size)
+ die("Cannot read symbol table: %s\n", strerror(errno));
+
+ for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Sym); j++) {
+ Elf_Sym *sym = &sec->symtab[j];
+
+ sym->st_name = elf_word_to_cpu(sym->st_name);
+ sym->st_value = elf_addr_to_cpu(sym->st_value);
+ sym->st_size = elf_xword_to_cpu(sym->st_size);
+ sym->st_shndx = elf_half_to_cpu(sym->st_shndx);
+ }
+ }
+}
+
+static void read_relocs(FILE *fp)
+{
+ static unsigned long base = 0;
+ int i, j;
+
+ if (!base) {
+ struct section *sec = sec_lookup(".text");
+
+ if (!sec)
+ die("Could not find .text section\n");
+
+ base = sec->shdr.sh_addr;
+ }
+
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ struct section *sec = &secs[i];
+
+ if (sec->shdr.sh_type != SHT_REL_TYPE)
+ continue;
+
+ sec->reltab = malloc(sec->shdr.sh_size);
+ if (!sec->reltab)
+ die("malloc of %d bytes for relocs failed\n",
+ sec->shdr.sh_size);
+
+ if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0)
+ die("Seek to %d failed: %s\n",
+ sec->shdr.sh_offset, strerror(errno));
+
+ if (fread(sec->reltab, 1, sec->shdr.sh_size, fp) !=
+ sec->shdr.sh_size)
+ die("Cannot read symbol table: %s\n", strerror(errno));
+
+ for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
+ Elf_Rel *rel = &sec->reltab[j];
+
+ rel->r_offset = elf_addr_to_cpu(rel->r_offset);
+ /* Set offset into kernel image */
+ rel->r_offset -= base;
+#if (ELF_BITS == 32)
+ rel->r_info = elf_xword_to_cpu(rel->r_info);
+#else
+ /* Convert MIPS64 RELA format - only the symbol
+ * index needs converting to native endianness
+ */
+ rel->r_info = rel->r_info;
+ ELF_R_SYM(rel->r_info) = elf32_to_cpu(ELF_R_SYM(rel->r_info));
+#endif
+#if (SHT_REL_TYPE == SHT_RELA)
+ rel->r_addend = elf_xword_to_cpu(rel->r_addend);
+#endif
+ }
+ }
+}
+
+static void remove_relocs(FILE *fp)
+{
+ int i;
+ Elf_Shdr shdr;
+
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ struct section *sec = &secs[i];
+
+ if (sec->shdr.sh_type != SHT_REL_TYPE)
+ continue;
+
+ if (fseek(fp, sec->shdr_offset, SEEK_SET) < 0)
+ die("Seek to %d failed: %s\n",
+ sec->shdr_offset, strerror(errno));
+
+ if (fread(&shdr, sizeof(shdr), 1, fp) != 1)
+ die("Cannot read ELF section headers %d/%d: %s\n",
+ i, ehdr.e_shnum, strerror(errno));
+
+ /* Set relocation section size to 0, effectively removing it.
+ * This is necessary due to lack of support for relocations
+ * in objcopy when creating 32bit elf from 64bit elf.
+ */
+ shdr.sh_size = 0;
+
+ if (fseek(fp, sec->shdr_offset, SEEK_SET) < 0)
+ die("Seek to %d failed: %s\n",
+ sec->shdr_offset, strerror(errno));
+
+ if (fwrite(&shdr, sizeof(shdr), 1, fp) != 1)
+ die("Cannot write ELF section headers %d/%d: %s\n",
+ i, ehdr.e_shnum, strerror(errno));
+ }
+}
+
+static void add_reloc(struct relocs *r, uint32_t offset, unsigned type)
+{
+ /* Relocation representation in binary table:
+ * |76543210|76543210|76543210|76543210|
+ * | Type | offset from _text >> 2 |
+ */
+ offset >>= 2;
+ if (offset > 0x00FFFFFF)
+ die("Kernel image exceeds maximum size for relocation!\n");
+
+ offset = (offset & 0x00FFFFFF) | ((type & 0xFF) << 24);
+
+ if (r->count == r->size) {
+ unsigned long newsize = r->size + 50000;
+ void *mem = realloc(r->offset, newsize * sizeof(r->offset[0]));
+
+ if (!mem)
+ die("realloc failed\n");
+
+ r->offset = mem;
+ r->size = newsize;
+ }
+ r->offset[r->count++] = offset;
+}
+
+static void walk_relocs(int (*process)(struct section *sec, Elf_Rel *rel,
+ Elf_Sym *sym, const char *symname))
+{
+ int i;
+
+ /* Walk through the relocations */
+ for (i = 0; i < ehdr.e_shnum; i++) {
+ char *sym_strtab;
+ Elf_Sym *sh_symtab;
+ struct section *sec_applies, *sec_symtab;
+ int j;
+ struct section *sec = &secs[i];
+
+ if (sec->shdr.sh_type != SHT_REL_TYPE)
+ continue;
+
+ sec_symtab = sec->link;
+ sec_applies = &secs[sec->shdr.sh_info];
+ if (!(sec_applies->shdr.sh_flags & SHF_ALLOC))
+ continue;
+
+ sh_symtab = sec_symtab->symtab;
+ sym_strtab = sec_symtab->link->strtab;
+ for (j = 0; j < sec->shdr.sh_size/sizeof(Elf_Rel); j++) {
+ Elf_Rel *rel = &sec->reltab[j];
+ Elf_Sym *sym = &sh_symtab[ELF_R_SYM(rel->r_info)];
+ const char *symname = sym_name(sym_strtab, sym);
+
+ process(sec, rel, sym, symname);
+ }
+ }
+}
+
+static int do_reloc(struct section *sec, Elf_Rel *rel, Elf_Sym *sym,
+ const char *symname)
+{
+ unsigned r_type = ELF_R_TYPE(rel->r_info);
+ unsigned bind = ELF_ST_BIND(sym->st_info);
+
+ if ((bind == STB_WEAK) && (sym->st_value == 0)) {
+ /* Don't relocate weak symbols without a target */
+ return 0;
+ }
+
+ if (regex_skip_reloc(symname))
+ return 0;
+
+ switch (r_type) {
+ case R_MIPS_NONE:
+ case R_MIPS_REL32:
+ case R_MIPS_PC16:
+ case R_MIPS_PC21_S2:
+ case R_MIPS_PC26_S2:
+ /*
+ * NONE can be ignored and PC relative relocations don't
+ * need to be adjusted.
+ */
+ case R_MIPS_HIGHEST:
+ case R_MIPS_HIGHER:
+ /* We support relocating within the same 4Gb segment only,
+ * thus leaving the top 32bits unchanged
+ */
+ case R_MIPS_LO16:
+ /* We support relocating by 64k jumps only
+ * thus leaving the bottom 16bits unchanged
+ */
+ break;
+
+ case R_MIPS_64:
+ case R_MIPS_32:
+ case R_MIPS_26:
+ case R_MIPS_HI16:
+ add_reloc(&relocs, rel->r_offset, r_type);
+ break;
+
+ default:
+ die("Unsupported relocation type: %s (%d)\n",
+ rel_type(r_type), r_type);
+ break;
+ }
+
+ return 0;
+}
+
+static int write_reloc_as_bin(uint32_t v, FILE *f)
+{
+ unsigned char buf[4];
+
+ v = cpu_to_elf32(v);
+
+ memcpy(buf, &v, sizeof(uint32_t));
+ return fwrite(buf, 1, 4, f);
+}
+
+static int write_reloc_as_text(uint32_t v, FILE *f)
+{
+ int res;
+
+ res = fprintf(f, "\t.long 0x%08"PRIx32"\n", v);
+ if (res < 0)
+ return res;
+ else
+ return sizeof(uint32_t);
+}
+
+static void emit_relocs(int as_text, int as_bin, FILE *outf)
+{
+ int i;
+ int (*write_reloc)(uint32_t, FILE *) = write_reloc_as_bin;
+ int size = 0;
+ int size_reserved;
+ struct section *sec_reloc;
+
+ sec_reloc = sec_lookup(".data.reloc");
+ if (!sec_reloc)
+ die("Could not find relocation section\n");
+
+ size_reserved = sec_reloc->shdr.sh_size;
+
+ /* Collect up the relocations */
+ walk_relocs(do_reloc);
+
+ /* Print the relocations */
+ if (as_text) {
+ /* Print the relocations in a form suitable that
+ * gas will like.
+ */
+ printf(".section \".data.reloc\",\"a\"\n");
+ printf(".balign 4\n");
+ /* Output text to stdout */
+ write_reloc = write_reloc_as_text;
+ outf = stdout;
+ } else if (as_bin) {
+ /* Output raw binary to stdout */
+ outf = stdout;
+ } else {
+ /* Seek to offset of the relocation section.
+ * Each relocation is then written into the
+ * vmlinux kernel image.
+ */
+ if (fseek(outf, sec_reloc->shdr.sh_offset, SEEK_SET) < 0) {
+ die("Seek to %d failed: %s\n",
+ sec_reloc->shdr.sh_offset, strerror(errno));
+ }
+ }
+
+ for (i = 0; i < relocs.count; i++)
+ size += write_reloc(relocs.offset[i], outf);
+
+ /* Print a stop, but only if we've actually written some relocs */
+ if (size)
+ size += write_reloc(0, outf);
+
+ if (size > size_reserved)
+ /* Die, but suggest a value for CONFIG_RELOCATION_TABLE_SIZE
+ * which will fix this problem and allow a bit of headroom
+ * if more kernel features are enabled
+ */
+ die("Relocations overflow available space!\n" \
+ "Please adjust CONFIG_RELOCATION_TABLE_SIZE " \
+ "to at least 0x%08x\n", (size + 0x1000) & ~0xFFF);
+}
+
+/*
+ * As an aid to debugging problems with different linkers
+ * print summary information about the relocs.
+ * Since different linkers tend to emit the sections in
+ * different orders we use the section names in the output.
+ */
+static int do_reloc_info(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
+ const char *symname)
+{
+ printf("%16s 0x%08x %16s %40s %16s\n",
+ sec_name(sec->shdr.sh_info),
+ (unsigned int)rel->r_offset,
+ rel_type(ELF_R_TYPE(rel->r_info)),
+ symname,
+ sec_name(sym->st_shndx));
+ return 0;
+}
+
+static void print_reloc_info(void)
+{
+ printf("%16s %10s %16s %40s %16s\n",
+ "reloc section",
+ "offset",
+ "reloc type",
+ "symbol",
+ "symbol section");
+ walk_relocs(do_reloc_info);
+}
+
+#if ELF_BITS == 64
+# define process process_64
+#else
+# define process process_32
+#endif
+
+void process(FILE *fp, int as_text, int as_bin,
+ int show_reloc_info, int keep_relocs)
+{
+ regex_init();
+ read_ehdr(fp);
+ read_shdrs(fp);
+ read_strtabs(fp);
+ read_symtabs(fp);
+ read_relocs(fp);
+ if (show_reloc_info) {
+ print_reloc_info();
+ return;
+ }
+ emit_relocs(as_text, as_bin, fp);
+ if (!keep_relocs)
+ remove_relocs(fp);
+}
diff --git a/arch/mips/boot/tools/relocs.h b/arch/mips/boot/tools/relocs.h
new file mode 100644
index 000000000..607ff0103
--- /dev/null
+++ b/arch/mips/boot/tools/relocs.h
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef RELOCS_H
+#define RELOCS_H
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <elf.h>
+#include <byteswap.h>
+#define USE_BSD
+#include <endian.h>
+#include <regex.h>
+
+void die(char *fmt, ...);
+
+/*
+ * Introduced for MIPSr6
+ */
+#ifndef R_MIPS_PC21_S2
+#define R_MIPS_PC21_S2 60
+#endif
+
+#ifndef R_MIPS_PC26_S2
+#define R_MIPS_PC26_S2 61
+#endif
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+enum symtype {
+ S_ABS,
+ S_REL,
+ S_SEG,
+ S_LIN,
+ S_NSYMTYPES
+};
+
+void process_32(FILE *fp, int as_text, int as_bin,
+ int show_reloc_info, int keep_relocs);
+void process_64(FILE *fp, int as_text, int as_bin,
+ int show_reloc_info, int keep_relocs);
+#endif /* RELOCS_H */
diff --git a/arch/mips/boot/tools/relocs_32.c b/arch/mips/boot/tools/relocs_32.c
new file mode 100644
index 000000000..428bea489
--- /dev/null
+++ b/arch/mips/boot/tools/relocs_32.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "relocs.h"
+
+#define ELF_BITS 32
+
+#define ELF_MACHINE EM_MIPS
+#define ELF_MACHINE_NAME "MIPS"
+#define SHT_REL_TYPE SHT_REL
+#define Elf_Rel ElfW(Rel)
+
+#define ELF_CLASS ELFCLASS32
+#define ELF_R_SYM(val) ELF32_R_SYM(val)
+#define ELF_R_TYPE(val) ELF32_R_TYPE(val)
+#define ELF_ST_TYPE(o) ELF32_ST_TYPE(o)
+#define ELF_ST_BIND(o) ELF32_ST_BIND(o)
+#define ELF_ST_VISIBILITY(o) ELF32_ST_VISIBILITY(o)
+
+#include "relocs.c"
diff --git a/arch/mips/boot/tools/relocs_64.c b/arch/mips/boot/tools/relocs_64.c
new file mode 100644
index 000000000..154015d74
--- /dev/null
+++ b/arch/mips/boot/tools/relocs_64.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "relocs.h"
+
+#define ELF_BITS 64
+
+#define ELF_MACHINE EM_MIPS
+#define ELF_MACHINE_NAME "MIPS64"
+#define SHT_REL_TYPE SHT_RELA
+#define Elf_Rel Elf64_Rela
+
+typedef uint8_t Elf64_Byte;
+
+typedef union {
+ struct {
+ Elf64_Word r_sym; /* Symbol index. */
+ Elf64_Byte r_ssym; /* Special symbol. */
+ Elf64_Byte r_type3; /* Third relocation. */
+ Elf64_Byte r_type2; /* Second relocation. */
+ Elf64_Byte r_type; /* First relocation. */
+ } fields;
+ Elf64_Xword unused;
+} Elf64_Mips_Rela;
+
+#define ELF_CLASS ELFCLASS64
+#define ELF_R_SYM(val) (((Elf64_Mips_Rela *)(&val))->fields.r_sym)
+#define ELF_R_TYPE(val) (((Elf64_Mips_Rela *)(&val))->fields.r_type)
+#define ELF_ST_TYPE(o) ELF64_ST_TYPE(o)
+#define ELF_ST_BIND(o) ELF64_ST_BIND(o)
+#define ELF_ST_VISIBILITY(o) ELF64_ST_VISIBILITY(o)
+
+#include "relocs.c"
diff --git a/arch/mips/boot/tools/relocs_main.c b/arch/mips/boot/tools/relocs_main.c
new file mode 100644
index 000000000..e2453a564
--- /dev/null
+++ b/arch/mips/boot/tools/relocs_main.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <endian.h>
+#include <elf.h>
+
+#include "relocs.h"
+
+void die(char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vfprintf(stderr, fmt, ap);
+ va_end(ap);
+ exit(1);
+}
+
+static void usage(void)
+{
+ die("relocs [--reloc-info|--text|--bin|--keep] vmlinux\n");
+}
+
+int main(int argc, char **argv)
+{
+ int show_reloc_info, as_text, as_bin, keep_relocs;
+ const char *fname;
+ FILE *fp;
+ int i;
+ unsigned char e_ident[EI_NIDENT];
+
+ show_reloc_info = 0;
+ as_text = 0;
+ as_bin = 0;
+ keep_relocs = 0;
+ fname = NULL;
+ for (i = 1; i < argc; i++) {
+ char *arg = argv[i];
+
+ if (*arg == '-') {
+ if (strcmp(arg, "--reloc-info") == 0) {
+ show_reloc_info = 1;
+ continue;
+ }
+ if (strcmp(arg, "--text") == 0) {
+ as_text = 1;
+ continue;
+ }
+ if (strcmp(arg, "--bin") == 0) {
+ as_bin = 1;
+ continue;
+ }
+ if (strcmp(arg, "--keep") == 0) {
+ keep_relocs = 1;
+ continue;
+ }
+ } else if (!fname) {
+ fname = arg;
+ continue;
+ }
+ usage();
+ }
+ if (!fname)
+ usage();
+
+ fp = fopen(fname, "r+");
+ if (!fp)
+ die("Cannot open %s: %s\n", fname, strerror(errno));
+
+ if (fread(&e_ident, 1, EI_NIDENT, fp) != EI_NIDENT)
+ die("Cannot read %s: %s", fname, strerror(errno));
+
+ rewind(fp);
+ if (e_ident[EI_CLASS] == ELFCLASS64)
+ process_64(fp, as_text, as_bin, show_reloc_info, keep_relocs);
+ else
+ process_32(fp, as_text, as_bin, show_reloc_info, keep_relocs);
+ fclose(fp);
+ return 0;
+}