diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-spi.c | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c new file mode 100644 index 000000000..525914e9b --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -0,0 +1,202 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for SPI initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-spi.h> +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pip-defs.h> +#include <asm/octeon/cvmx-pko-defs.h> +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> + +/* + * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI + * initialization routines wait for SPI training. You can override the + * value using executive-config.h if necessary. + */ +#ifndef CVMX_HELPER_SPI_TIMEOUT +#define CVMX_HELPER_SPI_TIMEOUT 10 +#endif + +int __cvmx_helper_spi_enumerate(int interface) +{ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + return 10; + } else { + return 16; + } +} + +/** + * Probe a SPI interface and determine the number of ports + * connected to it. The SPI interface should still be down after + * this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_spi_probe(int interface) +{ + int num_ports = 0; + + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + num_ports = 10; + } else { + union cvmx_pko_reg_crc_enable enable; + num_ports = 16; + /* + * Unlike the SPI4000, most SPI devices don't + * automatically put on the L2 CRC. For everything + * except for the SPI4000 have PKO append the L2 CRC + * to the packet. + */ + enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE); + enable.s.enable |= 0xffff << (interface * 16); + cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64); + } + __cvmx_helper_setup_gmx(interface, num_ports); + return num_ports; +} + +/** + * Bringup and enable a SPI interface. After this call packet I/O + * should be fully functional. This is called with IPD enabled but + * PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_spi_enable(int interface) +{ + /* + * Normally the ethernet L2 CRC is checked and stripped in the + * GMX block. When you are using SPI, this isn' the case and + * IPD needs to check the L2 CRC. + */ + int num_ports = cvmx_helper_ports_on_interface(interface); + int ipd_port; + for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports; + ipd_port++) { + union cvmx_pip_prt_cfgx port_config; + port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_config.s.crc_en = 1; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64); + } + + if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) { + cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX, + CVMX_HELPER_SPI_TIMEOUT, num_ports); + if (cvmx_spi4000_is_present(interface)) + cvmx_spi4000_initialize(interface); + } + __cvmx_interrupt_spxx_int_msk_enable(interface); + __cvmx_interrupt_stxx_int_msk_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +union cvmx_helper_link_info __cvmx_helper_spi_link_get(int ipd_port) +{ + union cvmx_helper_link_info result; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + result.u64 = 0; + + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) { + /* The simulator gives you a simulated full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } else if (cvmx_spi4000_is_present(interface)) { + union cvmx_gmxx_rxx_rx_inbnd inband = + cvmx_spi4000_check_speed(interface, index); + result.s.link_up = inband.s.status; + result.s.full_duplex = inband.s.duplex; + switch (inband.s.speed) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.s.speed = 0; + result.s.link_up = 0; + break; + } + } else { + /* For generic SPI we can't determine the link, just return some + sane results */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_spi_link_set(int ipd_port, union cvmx_helper_link_info link_info) +{ + /* Nothing to do. If we have a SPI4000 then the setup was already performed + by cvmx_spi4000_check_speed(). If not then there isn't any link + info */ + return 0; +} |