diff options
Diffstat (limited to '')
22 files changed, 8377 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile new file mode 100644 index 000000000..50b427879 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/Makefile @@ -0,0 +1,19 @@ +# +# Makefile for the Cavium Octeon specific kernel interface routines +# under Linux. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2005-2008 Cavium Networks +# + +obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o +obj-y += cvmx-pko.o cvmx-spi.o cvmx-cmd-queue.o \ + cvmx-helper-board.o cvmx-helper.o cvmx-helper-xaui.o \ + cvmx-helper-rgmii.o cvmx-helper-sgmii.o cvmx-helper-npi.o \ + cvmx-helper-loop.o cvmx-helper-spi.o cvmx-helper-util.o \ + cvmx-interrupt-decodes.o cvmx-interrupt-rsl.o + +obj-y += cvmx-helper-errata.o cvmx-helper-jtag.o cvmx-boot-vector.o diff --git a/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c new file mode 100644 index 000000000..b7019d218 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-boot-vector.c @@ -0,0 +1,167 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004-2017 Cavium, Inc. + */ + + +/* + We install this program at the bootvector: +------------------------------------ + .set noreorder + .set nomacro + .set noat +reset_vector: + dmtc0 $k0, $31, 0 # Save $k0 to DESAVE + dmtc0 $k1, $31, 3 # Save $k1 to KScratch2 + + mfc0 $k0, $12, 0 # Status + mfc0 $k1, $15, 1 # Ebase + + ori $k0, 0x84 # Enable 64-bit addressing, set + # ERL (should already be set) + andi $k1, 0x3ff # mask out core ID + + mtc0 $k0, $12, 0 # Status + sll $k1, 5 + + lui $k0, 0xbfc0 + cache 17, 0($0) # Core-14345, clear L1 Dcache virtual + # tags if the core hit an NMI + + ld $k0, 0x78($k0) # k0 <- (bfc00078) pointer to the reset vector + synci 0($0) # Invalidate ICache to get coherent + # view of target code. + + daddu $k0, $k0, $k1 + nop + + ld $k0, 0($k0) # k0 <- core specific target address + dmfc0 $k1, $31, 3 # Restore $k1 from KScratch2 + + beqz $k0, wait_loop # Spin in wait loop + nop + + jr $k0 + nop + + nop # NOPs needed here to fill delay slots + nop # on endian reversal of previous instructions + +wait_loop: + wait + nop + + b wait_loop + nop + + nop + nop +------------------------------------ + +0000000000000000 <reset_vector>: + 0: 40baf800 dmtc0 k0,c0_desave + 4: 40bbf803 dmtc0 k1,c0_kscratch2 + + 8: 401a6000 mfc0 k0,c0_status + c: 401b7801 mfc0 k1,c0_ebase + + 10: 375a0084 ori k0,k0,0x84 + 14: 337b03ff andi k1,k1,0x3ff + + 18: 409a6000 mtc0 k0,c0_status + 1c: 001bd940 sll k1,k1,0x5 + + 20: 3c1abfc0 lui k0,0xbfc0 + 24: bc110000 cache 0x11,0(zero) + + 28: df5a0078 ld k0,120(k0) + 2c: 041f0000 synci 0(zero) + + 30: 035bd02d daddu k0,k0,k1 + 34: 00000000 nop + + 38: df5a0000 ld k0,0(k0) + 3c: 403bf803 dmfc0 k1,c0_kscratch2 + + 40: 13400005 beqz k0,58 <wait_loop> + 44: 00000000 nop + + 48: 03400008 jr k0 + 4c: 00000000 nop + + 50: 00000000 nop + 54: 00000000 nop + +0000000000000058 <wait_loop>: + 58: 42000020 wait + 5c: 00000000 nop + + 60: 1000fffd b 58 <wait_loop> + 64: 00000000 nop + + 68: 00000000 nop + 6c: 00000000 nop + + */ + +#include <asm/octeon/cvmx-boot-vector.h> + +static unsigned long long _cvmx_bootvector_data[16] = { + 0x40baf80040bbf803ull, /* patch low order 8-bits if no KScratch*/ + 0x401a6000401b7801ull, + 0x375a0084337b03ffull, + 0x409a6000001bd940ull, + 0x3c1abfc0bc110000ull, + 0xdf5a0078041f0000ull, + 0x035bd02d00000000ull, + 0xdf5a0000403bf803ull, /* patch low order 8-bits if no KScratch*/ + 0x1340000500000000ull, + 0x0340000800000000ull, + 0x0000000000000000ull, + 0x4200002000000000ull, + 0x1000fffd00000000ull, + 0x0000000000000000ull, + OCTEON_BOOT_MOVEABLE_MAGIC1, + 0 /* To be filled in with address of vector block*/ +}; + +/* 2^10 CPUs */ +#define VECTOR_TABLE_SIZE (1024 * sizeof(struct cvmx_boot_vector_element)) + +static void cvmx_boot_vector_init(void *mem) +{ + uint64_t kseg0_mem; + int i; + + memset(mem, 0, VECTOR_TABLE_SIZE); + kseg0_mem = cvmx_ptr_to_phys(mem) | 0x8000000000000000ull; + + for (i = 0; i < 15; i++) { + uint64_t v = _cvmx_bootvector_data[i]; + + if (OCTEON_IS_OCTEON1PLUS() && (i == 0 || i == 7)) + v &= 0xffffffff00000000ull; /* KScratch not availble. */ + cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, i * 8); + cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, v); + } + cvmx_write_csr(CVMX_MIO_BOOT_LOC_ADR, 15 * 8); + cvmx_write_csr(CVMX_MIO_BOOT_LOC_DAT, kseg0_mem); + cvmx_write_csr(CVMX_MIO_BOOT_LOC_CFGX(0), 0x81fc0000); +} + +/** + * Get a pointer to the per-core table of reset vector pointers + * + */ +struct cvmx_boot_vector_element *cvmx_boot_vector_get(void) +{ + struct cvmx_boot_vector_element *ret; + + ret = cvmx_bootmem_alloc_named_range_once(VECTOR_TABLE_SIZE, 0, + (1ull << 32) - 1, 8, "__boot_vector1__", cvmx_boot_vector_init); + return ret; +} +EXPORT_SYMBOL(cvmx_boot_vector_get); diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c new file mode 100644 index 000000000..e794b2d53 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -0,0 +1,796 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Simple allocate only memory allocator. Used to allocate memory at + * application start time. + */ + +#include <linux/export.h> +#include <linux/kernel.h> + +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-spinlock.h> +#include <asm/octeon/cvmx-bootmem.h> + +/*#define DEBUG */ + + +static struct cvmx_bootmem_desc *cvmx_bootmem_desc; + +/* See header file for descriptions of functions */ + +/** + * This macro returns a member of the + * cvmx_bootmem_named_block_desc_t structure. These members can't + * be directly addressed as they might be in memory not directly + * reachable. In the case where bootmem is compiled with + * LINUX_HOST, the structure itself might be located on a remote + * Octeon. The argument "field" is the member name of the + * cvmx_bootmem_named_block_desc_t to read. Regardless of the type + * of the field, the return type is always a uint64_t. The "addr" + * parameter is the physical address of the structure. + */ +#define CVMX_BOOTMEM_NAMED_GET_FIELD(addr, field) \ + __cvmx_bootmem_desc_get(addr, \ + offsetof(struct cvmx_bootmem_named_block_desc, field), \ + sizeof_field(struct cvmx_bootmem_named_block_desc, field)) + +/** + * This function is the implementation of the get macros defined + * for individual structure members. The argument are generated + * by the macros inorder to read only the needed memory. + * + * @param base 64bit physical address of the complete structure + * @param offset Offset from the beginning of the structure to the member being + * accessed. + * @param size Size of the structure member. + * + * @return Value of the structure member promoted into a uint64_t. + */ +static inline uint64_t __cvmx_bootmem_desc_get(uint64_t base, int offset, + int size) +{ + base = (1ull << 63) | (base + offset); + switch (size) { + case 4: + return cvmx_read64_uint32(base); + case 8: + return cvmx_read64_uint64(base); + default: + return 0; + } +} + +/* + * Wrapper functions are provided for reading/writing the size and + * next block values as these may not be directly addressible (in 32 + * bit applications, for instance.) Offsets of data elements in + * bootmem list, must match cvmx_bootmem_block_header_t. + */ +#define NEXT_OFFSET 0 +#define SIZE_OFFSET 8 + +static void cvmx_bootmem_phy_set_size(uint64_t addr, uint64_t size) +{ + cvmx_write64_uint64((addr + SIZE_OFFSET) | (1ull << 63), size); +} + +static void cvmx_bootmem_phy_set_next(uint64_t addr, uint64_t next) +{ + cvmx_write64_uint64((addr + NEXT_OFFSET) | (1ull << 63), next); +} + +static uint64_t cvmx_bootmem_phy_get_size(uint64_t addr) +{ + return cvmx_read64_uint64((addr + SIZE_OFFSET) | (1ull << 63)); +} + +static uint64_t cvmx_bootmem_phy_get_next(uint64_t addr) +{ + return cvmx_read64_uint64((addr + NEXT_OFFSET) | (1ull << 63)); +} + +/** + * Allocate a block of memory from the free list that was + * passed to the application by the bootloader within a specified + * address range. This is an allocate-only algorithm, so + * freeing memory is not possible. Allocation will fail if + * memory cannot be allocated in the requested range. + * + * @size: Size in bytes of block to allocate + * @min_addr: defines the minimum address of the range + * @max_addr: defines the maximum address of the range + * @alignment: Alignment required - must be power of 2 + * Returns pointer to block of memory, NULL on error + */ +static void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment, + uint64_t min_addr, uint64_t max_addr) +{ + int64_t address; + address = + cvmx_bootmem_phy_alloc(size, min_addr, max_addr, alignment, 0); + + if (address > 0) + return cvmx_phys_to_ptr(address); + else + return NULL; +} + +void *cvmx_bootmem_alloc_address(uint64_t size, uint64_t address, + uint64_t alignment) +{ + return cvmx_bootmem_alloc_range(size, alignment, address, + address + size); +} + +void *cvmx_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr, + uint64_t max_addr, uint64_t align, + char *name) +{ + int64_t addr; + + addr = cvmx_bootmem_phy_named_block_alloc(size, min_addr, max_addr, + align, name, 0); + if (addr >= 0) + return cvmx_phys_to_ptr(addr); + else + return NULL; +} + +void *cvmx_bootmem_alloc_named(uint64_t size, uint64_t alignment, char *name) +{ + return cvmx_bootmem_alloc_named_range(size, 0, 0, alignment, name); +} +EXPORT_SYMBOL(cvmx_bootmem_alloc_named); + +void cvmx_bootmem_lock(void) +{ + cvmx_spinlock_lock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock)); +} + +void cvmx_bootmem_unlock(void) +{ + cvmx_spinlock_unlock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock)); +} + +int cvmx_bootmem_init(void *mem_desc_ptr) +{ + /* Here we set the global pointer to the bootmem descriptor + * block. This pointer will be used directly, so we will set + * it up to be directly usable by the application. It is set + * up as follows for the various runtime/ABI combinations: + * + * Linux 64 bit: Set XKPHYS bit + * Linux 32 bit: use mmap to create mapping, use virtual address + * CVMX 64 bit: use physical address directly + * CVMX 32 bit: use physical address directly + * + * Note that the CVMX environment assumes the use of 1-1 TLB + * mappings so that the physical addresses can be used + * directly + */ + if (!cvmx_bootmem_desc) { +#if defined(CVMX_ABI_64) + /* Set XKPHYS bit */ + cvmx_bootmem_desc = cvmx_phys_to_ptr(CAST64(mem_desc_ptr)); +#else + cvmx_bootmem_desc = (struct cvmx_bootmem_desc *) mem_desc_ptr; +#endif + } + + return 0; +} + +/* + * The cvmx_bootmem_phy* functions below return 64 bit physical + * addresses, and expose more features that the cvmx_bootmem_functions + * above. These are required for full memory space access in 32 bit + * applications, as well as for using some advance features. Most + * applications should not need to use these. + */ + +int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min, + uint64_t address_max, uint64_t alignment, + uint32_t flags) +{ + + uint64_t head_addr; + uint64_t ent_addr; + /* points to previous list entry, NULL current entry is head of list */ + uint64_t prev_addr = 0; + uint64_t new_ent_addr = 0; + uint64_t desired_min_addr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_alloc: req_size: 0x%llx, " + "min_addr: 0x%llx, max_addr: 0x%llx, align: 0x%llx\n", + (unsigned long long)req_size, + (unsigned long long)address_min, + (unsigned long long)address_max, + (unsigned long long)alignment); +#endif + + if (cvmx_bootmem_desc->major_version > 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor " + "version: %d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + goto error_out; + } + + /* + * Do a variety of checks to validate the arguments. The + * allocator code will later assume that these checks have + * been made. We validate that the requested constraints are + * not self-contradictory before we look through the list of + * available memory. + */ + + /* 0 is not a valid req_size for this allocator */ + if (!req_size) + goto error_out; + + /* Round req_size up to mult of minimum alignment bytes */ + req_size = (req_size + (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1)) & + ~(CVMX_BOOTMEM_ALIGNMENT_SIZE - 1); + + /* + * Convert !0 address_min and 0 address_max to special case of + * range that specifies an exact memory block to allocate. Do + * this before other checks and adjustments so that this + * tranformation will be validated. + */ + if (address_min && !address_max) + address_max = address_min + req_size; + else if (!address_min && !address_max) + address_max = ~0ull; /* If no limits given, use max limits */ + + + /* + * Enforce minimum alignment (this also keeps the minimum free block + * req_size the same as the alignment req_size. + */ + if (alignment < CVMX_BOOTMEM_ALIGNMENT_SIZE) + alignment = CVMX_BOOTMEM_ALIGNMENT_SIZE; + + /* + * Adjust address minimum based on requested alignment (round + * up to meet alignment). Do this here so we can reject + * impossible requests up front. (NOP for address_min == 0) + */ + if (alignment) + address_min = ALIGN(address_min, alignment); + + /* + * Reject inconsistent args. We have adjusted these, so this + * may fail due to our internal changes even if this check + * would pass for the values the user supplied. + */ + if (req_size > address_max - address_min) + goto error_out; + + /* Walk through the list entries - first fit found is returned */ + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_lock(); + head_addr = cvmx_bootmem_desc->head_addr; + ent_addr = head_addr; + for (; ent_addr; + prev_addr = ent_addr, + ent_addr = cvmx_bootmem_phy_get_next(ent_addr)) { + uint64_t usable_base, usable_max; + uint64_t ent_size = cvmx_bootmem_phy_get_size(ent_addr); + + if (cvmx_bootmem_phy_get_next(ent_addr) + && ent_addr > cvmx_bootmem_phy_get_next(ent_addr)) { + cvmx_dprintf("Internal bootmem_alloc() error: ent: " + "0x%llx, next: 0x%llx\n", + (unsigned long long)ent_addr, + (unsigned long long) + cvmx_bootmem_phy_get_next(ent_addr)); + goto error_out; + } + + /* + * Determine if this is an entry that can satisify the + * request Check to make sure entry is large enough to + * satisfy request. + */ + usable_base = + ALIGN(max(address_min, ent_addr), alignment); + usable_max = min(address_max, ent_addr + ent_size); + /* + * We should be able to allocate block at address + * usable_base. + */ + + desired_min_addr = usable_base; + /* + * Determine if request can be satisfied from the + * current entry. + */ + if (!((ent_addr + ent_size) > usable_base + && ent_addr < address_max + && req_size <= usable_max - usable_base)) + continue; + /* + * We have found an entry that has room to satisfy the + * request, so allocate it from this entry. If end + * CVMX_BOOTMEM_FLAG_END_ALLOC set, then allocate from + * the end of this block rather than the beginning. + */ + if (flags & CVMX_BOOTMEM_FLAG_END_ALLOC) { + desired_min_addr = usable_max - req_size; + /* + * Align desired address down to required + * alignment. + */ + desired_min_addr &= ~(alignment - 1); + } + + /* Match at start of entry */ + if (desired_min_addr == ent_addr) { + if (req_size < ent_size) { + /* + * big enough to create a new block + * from top portion of block. + */ + new_ent_addr = ent_addr + req_size; + cvmx_bootmem_phy_set_next(new_ent_addr, + cvmx_bootmem_phy_get_next(ent_addr)); + cvmx_bootmem_phy_set_size(new_ent_addr, + ent_size - + req_size); + + /* + * Adjust next pointer as following + * code uses this. + */ + cvmx_bootmem_phy_set_next(ent_addr, + new_ent_addr); + } + + /* + * adjust prev ptr or head to remove this + * entry from list. + */ + if (prev_addr) + cvmx_bootmem_phy_set_next(prev_addr, + cvmx_bootmem_phy_get_next(ent_addr)); + else + /* + * head of list being returned, so + * update head ptr. + */ + cvmx_bootmem_desc->head_addr = + cvmx_bootmem_phy_get_next(ent_addr); + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + return desired_min_addr; + } + /* + * block returned doesn't start at beginning of entry, + * so we know that we will be splitting a block off + * the front of this one. Create a new block from the + * beginning, add to list, and go to top of loop + * again. + * + * create new block from high portion of + * block, so that top block starts at desired + * addr. + */ + new_ent_addr = desired_min_addr; + cvmx_bootmem_phy_set_next(new_ent_addr, + cvmx_bootmem_phy_get_next + (ent_addr)); + cvmx_bootmem_phy_set_size(new_ent_addr, + cvmx_bootmem_phy_get_size + (ent_addr) - + (desired_min_addr - + ent_addr)); + cvmx_bootmem_phy_set_size(ent_addr, + desired_min_addr - ent_addr); + cvmx_bootmem_phy_set_next(ent_addr, new_ent_addr); + /* Loop again to handle actual alloc from new block */ + } +error_out: + /* We didn't find anything, so return error */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + return -1; +} + +int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) +{ + uint64_t cur_addr; + uint64_t prev_addr = 0; /* zero is invalid */ + int retval = 0; + +#ifdef DEBUG + cvmx_dprintf("__cvmx_bootmem_phy_free addr: 0x%llx, size: 0x%llx\n", + (unsigned long long)phy_addr, (unsigned long long)size); +#endif + if (cvmx_bootmem_desc->major_version > 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor " + "version: %d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return 0; + } + + /* 0 is not a valid size for this allocator */ + if (!size) + return 0; + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_lock(); + cur_addr = cvmx_bootmem_desc->head_addr; + if (cur_addr == 0 || phy_addr < cur_addr) { + /* add at front of list - special case with changing head ptr */ + if (cur_addr && phy_addr + size > cur_addr) + goto bootmem_free_done; /* error, overlapping section */ + else if (phy_addr + size == cur_addr) { + /* Add to front of existing first block */ + cvmx_bootmem_phy_set_next(phy_addr, + cvmx_bootmem_phy_get_next + (cur_addr)); + cvmx_bootmem_phy_set_size(phy_addr, + cvmx_bootmem_phy_get_size + (cur_addr) + size); + cvmx_bootmem_desc->head_addr = phy_addr; + + } else { + /* New block before first block. OK if cur_addr is 0 */ + cvmx_bootmem_phy_set_next(phy_addr, cur_addr); + cvmx_bootmem_phy_set_size(phy_addr, size); + cvmx_bootmem_desc->head_addr = phy_addr; + } + retval = 1; + goto bootmem_free_done; + } + + /* Find place in list to add block */ + while (cur_addr && phy_addr > cur_addr) { + prev_addr = cur_addr; + cur_addr = cvmx_bootmem_phy_get_next(cur_addr); + } + + if (!cur_addr) { + /* + * We have reached the end of the list, add on to end, + * checking to see if we need to combine with last + * block + */ + if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) == + phy_addr) { + cvmx_bootmem_phy_set_size(prev_addr, + cvmx_bootmem_phy_get_size + (prev_addr) + size); + } else { + cvmx_bootmem_phy_set_next(prev_addr, phy_addr); + cvmx_bootmem_phy_set_size(phy_addr, size); + cvmx_bootmem_phy_set_next(phy_addr, 0); + } + retval = 1; + goto bootmem_free_done; + } else { + /* + * insert between prev and cur nodes, checking for + * merge with either/both. + */ + if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) == + phy_addr) { + /* Merge with previous */ + cvmx_bootmem_phy_set_size(prev_addr, + cvmx_bootmem_phy_get_size + (prev_addr) + size); + if (phy_addr + size == cur_addr) { + /* Also merge with current */ + cvmx_bootmem_phy_set_size(prev_addr, + cvmx_bootmem_phy_get_size(cur_addr) + + cvmx_bootmem_phy_get_size(prev_addr)); + cvmx_bootmem_phy_set_next(prev_addr, + cvmx_bootmem_phy_get_next(cur_addr)); + } + retval = 1; + goto bootmem_free_done; + } else if (phy_addr + size == cur_addr) { + /* Merge with current */ + cvmx_bootmem_phy_set_size(phy_addr, + cvmx_bootmem_phy_get_size + (cur_addr) + size); + cvmx_bootmem_phy_set_next(phy_addr, + cvmx_bootmem_phy_get_next + (cur_addr)); + cvmx_bootmem_phy_set_next(prev_addr, phy_addr); + retval = 1; + goto bootmem_free_done; + } + + /* It is a standalone block, add in between prev and cur */ + cvmx_bootmem_phy_set_size(phy_addr, size); + cvmx_bootmem_phy_set_next(phy_addr, cur_addr); + cvmx_bootmem_phy_set_next(prev_addr, phy_addr); + + } + retval = 1; + +bootmem_free_done: + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + return retval; + +} + +/** + * Finds a named memory block by name. + * Also used for finding an unused entry in the named block table. + * + * @name: Name of memory block to find. If NULL pointer given, then + * finds unused descriptor, if available. + * + * @flags: Flags to control options for the allocation. + * + * Returns Pointer to memory block descriptor, NULL if not found. + * If NULL returned when name parameter is NULL, then no memory + * block descriptors are available. + */ +static struct cvmx_bootmem_named_block_desc * + cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags) +{ + unsigned int i; + struct cvmx_bootmem_named_block_desc *named_block_array_ptr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_find: %s\n", name); +#endif + /* + * Lock the structure to make sure that it is not being + * changed while we are examining it. + */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_lock(); + + /* Use XKPHYS for 64 bit linux */ + named_block_array_ptr = (struct cvmx_bootmem_named_block_desc *) + cvmx_phys_to_ptr(cvmx_bootmem_desc->named_block_array_addr); + +#ifdef DEBUG + cvmx_dprintf + ("cvmx_bootmem_phy_named_block_find: named_block_array_ptr: %p\n", + named_block_array_ptr); +#endif + if (cvmx_bootmem_desc->major_version == 3) { + for (i = 0; + i < cvmx_bootmem_desc->named_block_num_blocks; i++) { + if ((name && named_block_array_ptr[i].size + && !strncmp(name, named_block_array_ptr[i].name, + cvmx_bootmem_desc->named_block_name_len + - 1)) + || (!name && !named_block_array_ptr[i].size)) { + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + + return &(named_block_array_ptr[i]); + } + } + } else { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor " + "version: %d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + } + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_bootmem_unlock(); + + return NULL; +} + +void *cvmx_bootmem_alloc_named_range_once(uint64_t size, uint64_t min_addr, + uint64_t max_addr, uint64_t align, + char *name, + void (*init) (void *)) +{ + int64_t addr; + void *ptr; + uint64_t named_block_desc_addr; + + named_block_desc_addr = (uint64_t) + cvmx_bootmem_phy_named_block_find(name, + (uint32_t)CVMX_BOOTMEM_FLAG_NO_LOCKING); + + if (named_block_desc_addr) { + addr = CVMX_BOOTMEM_NAMED_GET_FIELD(named_block_desc_addr, + base_addr); + return cvmx_phys_to_ptr(addr); + } + + addr = cvmx_bootmem_phy_named_block_alloc(size, min_addr, max_addr, + align, name, + (uint32_t)CVMX_BOOTMEM_FLAG_NO_LOCKING); + + if (addr < 0) + return NULL; + ptr = cvmx_phys_to_ptr(addr); + + if (init) + init(ptr); + else + memset(ptr, 0, size); + + return ptr; +} +EXPORT_SYMBOL(cvmx_bootmem_alloc_named_range_once); + +struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name) +{ + return cvmx_bootmem_phy_named_block_find(name, 0); +} +EXPORT_SYMBOL(cvmx_bootmem_find_named_block); + +/** + * Frees a named block. + * + * @name: name of block to free + * @flags: flags for passing options + * + * Returns 0 on failure + * 1 on success + */ +static int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags) +{ + struct cvmx_bootmem_named_block_desc *named_block_ptr; + + if (cvmx_bootmem_desc->major_version != 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: " + "%d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return 0; + } +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_free: %s\n", name); +#endif + + /* + * Take lock here, as name lookup/block free/name free need to + * be atomic. + */ + cvmx_bootmem_lock(); + + named_block_ptr = + cvmx_bootmem_phy_named_block_find(name, + CVMX_BOOTMEM_FLAG_NO_LOCKING); + if (named_block_ptr) { +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_free: " + "%s, base: 0x%llx, size: 0x%llx\n", + name, + (unsigned long long)named_block_ptr->base_addr, + (unsigned long long)named_block_ptr->size); +#endif + __cvmx_bootmem_phy_free(named_block_ptr->base_addr, + named_block_ptr->size, + CVMX_BOOTMEM_FLAG_NO_LOCKING); + named_block_ptr->size = 0; + /* Set size to zero to indicate block not used. */ + } + + cvmx_bootmem_unlock(); + return named_block_ptr != NULL; /* 0 on failure, 1 on success */ +} + +int cvmx_bootmem_free_named(char *name) +{ + return cvmx_bootmem_phy_named_block_free(name, 0); +} + +int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, + uint64_t max_addr, + uint64_t alignment, + char *name, + uint32_t flags) +{ + int64_t addr_allocated; + struct cvmx_bootmem_named_block_desc *named_block_desc_ptr; + +#ifdef DEBUG + cvmx_dprintf("cvmx_bootmem_phy_named_block_alloc: size: 0x%llx, min: " + "0x%llx, max: 0x%llx, align: 0x%llx, name: %s\n", + (unsigned long long)size, + (unsigned long long)min_addr, + (unsigned long long)max_addr, + (unsigned long long)alignment, + name); +#endif + if (cvmx_bootmem_desc->major_version != 3) { + cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: " + "%d.%d at addr: %p\n", + (int)cvmx_bootmem_desc->major_version, + (int)cvmx_bootmem_desc->minor_version, + cvmx_bootmem_desc); + return -1; + } + + /* + * Take lock here, as name lookup/block alloc/name add need to + * be atomic. + */ + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_lock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + + /* Get pointer to first available named block descriptor */ + named_block_desc_ptr = + cvmx_bootmem_phy_named_block_find(NULL, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING); + + /* + * Check to see if name already in use, return error if name + * not available or no more room for blocks. + */ + if (cvmx_bootmem_phy_named_block_find(name, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING) || !named_block_desc_ptr) { + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + return -1; + } + + + /* + * Round size up to mult of minimum alignment bytes We need + * the actual size allocated to allow for blocks to be + * coalesced when they are freed. The alloc routine does the + * same rounding up on all allocations. + */ + size = ALIGN(size, CVMX_BOOTMEM_ALIGNMENT_SIZE); + + addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr, + alignment, + flags | CVMX_BOOTMEM_FLAG_NO_LOCKING); + if (addr_allocated >= 0) { + named_block_desc_ptr->base_addr = addr_allocated; + named_block_desc_ptr->size = size; + strncpy(named_block_desc_ptr->name, name, + cvmx_bootmem_desc->named_block_name_len); + named_block_desc_ptr->name[cvmx_bootmem_desc->named_block_name_len - 1] = 0; + } + + if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING)) + cvmx_spinlock_unlock((cvmx_spinlock_t *)&(cvmx_bootmem_desc->lock)); + return addr_allocated; +} + +struct cvmx_bootmem_desc *cvmx_bootmem_get_desc(void) +{ + return cvmx_bootmem_desc; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c new file mode 100644 index 000000000..3839feba6 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c @@ -0,0 +1,307 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Support functions for managing command queues used for + * various hardware blocks. + */ + +#include <linux/kernel.h> + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-cmd-queue.h> + +#include <asm/octeon/cvmx-npei-defs.h> +#include <asm/octeon/cvmx-pexp-defs.h> +#include <asm/octeon/cvmx-pko-defs.h> + +/** + * This application uses this pointer to access the global queue + * state. It points to a bootmem named block. + */ +__cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr; +EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr); + +/** + * Initialize the Global queue state pointer. + * + * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code + */ +static cvmx_cmd_queue_result_t __cvmx_cmd_queue_init_state_ptr(void) +{ + char *alloc_name = "cvmx_cmd_queues"; +#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 + extern uint64_t octeon_reserve32_memory; +#endif + + if (likely(__cvmx_cmd_queue_state_ptr)) + return CVMX_CMD_QUEUE_SUCCESS; + +#if defined(CONFIG_CAVIUM_RESERVE32) && CONFIG_CAVIUM_RESERVE32 + if (octeon_reserve32_memory) + __cvmx_cmd_queue_state_ptr = + cvmx_bootmem_alloc_named_range(sizeof(*__cvmx_cmd_queue_state_ptr), + octeon_reserve32_memory, + octeon_reserve32_memory + + (CONFIG_CAVIUM_RESERVE32 << + 20) - 1, 128, alloc_name); + else +#endif + __cvmx_cmd_queue_state_ptr = + cvmx_bootmem_alloc_named(sizeof(*__cvmx_cmd_queue_state_ptr), + 128, + alloc_name); + if (__cvmx_cmd_queue_state_ptr) + memset(__cvmx_cmd_queue_state_ptr, 0, + sizeof(*__cvmx_cmd_queue_state_ptr)); + else { + struct cvmx_bootmem_named_block_desc *block_desc = + cvmx_bootmem_find_named_block(alloc_name); + if (block_desc) + __cvmx_cmd_queue_state_ptr = + cvmx_phys_to_ptr(block_desc->base_addr); + else { + cvmx_dprintf + ("ERROR: cvmx_cmd_queue_initialize: Unable to get named block %s.\n", + alloc_name); + return CVMX_CMD_QUEUE_NO_MEMORY; + } + } + return CVMX_CMD_QUEUE_SUCCESS; +} + +/** + * Initialize a command queue for use. The initial FPA buffer is + * allocated and the hardware unit is configured to point to the + * new command queue. + * + * @queue_id: Hardware command queue to initialize. + * @max_depth: Maximum outstanding commands that can be queued. + * @fpa_pool: FPA pool the command queues should come from. + * @pool_size: Size of each buffer in the FPA pool (bytes) + * + * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code + */ +cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id, + int max_depth, int fpa_pool, + int pool_size) +{ + __cvmx_cmd_queue_state_t *qstate; + cvmx_cmd_queue_result_t result = __cvmx_cmd_queue_init_state_ptr(); + if (result != CVMX_CMD_QUEUE_SUCCESS) + return result; + + qstate = __cvmx_cmd_queue_get_state(queue_id); + if (qstate == NULL) + return CVMX_CMD_QUEUE_INVALID_PARAM; + + /* + * We artificially limit max_depth to 1<<20 words. It is an + * arbitrary limit. + */ + if (CVMX_CMD_QUEUE_ENABLE_MAX_DEPTH) { + if ((max_depth < 0) || (max_depth > 1 << 20)) + return CVMX_CMD_QUEUE_INVALID_PARAM; + } else if (max_depth != 0) + return CVMX_CMD_QUEUE_INVALID_PARAM; + + if ((fpa_pool < 0) || (fpa_pool > 7)) + return CVMX_CMD_QUEUE_INVALID_PARAM; + if ((pool_size < 128) || (pool_size > 65536)) + return CVMX_CMD_QUEUE_INVALID_PARAM; + + /* See if someone else has already initialized the queue */ + if (qstate->base_ptr_div128) { + if (max_depth != (int)qstate->max_depth) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Queue already initialized with different " + "max_depth (%d).\n", + (int)qstate->max_depth); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + if (fpa_pool != qstate->fpa_pool) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Queue already initialized with different " + "FPA pool (%u).\n", + qstate->fpa_pool); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + if ((pool_size >> 3) - 1 != qstate->pool_size_m1) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Queue already initialized with different " + "FPA pool size (%u).\n", + (qstate->pool_size_m1 + 1) << 3); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + CVMX_SYNCWS; + return CVMX_CMD_QUEUE_ALREADY_SETUP; + } else { + union cvmx_fpa_ctl_status status; + void *buffer; + + status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS); + if (!status.s.enb) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "FPA is not enabled.\n"); + return CVMX_CMD_QUEUE_NO_MEMORY; + } + buffer = cvmx_fpa_alloc(fpa_pool); + if (buffer == NULL) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " + "Unable to allocate initial buffer.\n"); + return CVMX_CMD_QUEUE_NO_MEMORY; + } + + memset(qstate, 0, sizeof(*qstate)); + qstate->max_depth = max_depth; + qstate->fpa_pool = fpa_pool; + qstate->pool_size_m1 = (pool_size >> 3) - 1; + qstate->base_ptr_div128 = cvmx_ptr_to_phys(buffer) / 128; + /* + * We zeroed the now serving field so we need to also + * zero the ticket. + */ + __cvmx_cmd_queue_state_ptr-> + ticket[__cvmx_cmd_queue_get_index(queue_id)] = 0; + CVMX_SYNCWS; + return CVMX_CMD_QUEUE_SUCCESS; + } +} + +/** + * Shutdown a queue a free it's command buffers to the FPA. The + * hardware connected to the queue must be stopped before this + * function is called. + * + * @queue_id: Queue to shutdown + * + * Returns CVMX_CMD_QUEUE_SUCCESS or a failure code + */ +cvmx_cmd_queue_result_t cvmx_cmd_queue_shutdown(cvmx_cmd_queue_id_t queue_id) +{ + __cvmx_cmd_queue_state_t *qptr = __cvmx_cmd_queue_get_state(queue_id); + if (qptr == NULL) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_shutdown: Unable to " + "get queue information.\n"); + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + + if (cvmx_cmd_queue_length(queue_id) > 0) { + cvmx_dprintf("ERROR: cvmx_cmd_queue_shutdown: Queue still " + "has data in it.\n"); + return CVMX_CMD_QUEUE_FULL; + } + + __cvmx_cmd_queue_lock(queue_id, qptr); + if (qptr->base_ptr_div128) { + cvmx_fpa_free(cvmx_phys_to_ptr + ((uint64_t) qptr->base_ptr_div128 << 7), + qptr->fpa_pool, 0); + qptr->base_ptr_div128 = 0; + } + __cvmx_cmd_queue_unlock(qptr); + + return CVMX_CMD_QUEUE_SUCCESS; +} + +/** + * Return the number of command words pending in the queue. This + * function may be relatively slow for some hardware units. + * + * @queue_id: Hardware command queue to query + * + * Returns Number of outstanding commands + */ +int cvmx_cmd_queue_length(cvmx_cmd_queue_id_t queue_id) +{ + if (CVMX_ENABLE_PARAMETER_CHECKING) { + if (__cvmx_cmd_queue_get_state(queue_id) == NULL) + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + + /* + * The cast is here so gcc with check that all values in the + * cvmx_cmd_queue_id_t enumeration are here. + */ + switch ((cvmx_cmd_queue_id_t) (queue_id & 0xff0000)) { + case CVMX_CMD_QUEUE_PKO_BASE: + /* + * FIXME: Need atomic lock on + * CVMX_PKO_REG_READ_IDX. Right now we are normally + * called with the queue lock, so that is a SLIGHT + * amount of protection. + */ + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue_id & 0xffff); + if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_pko_mem_debug9 debug9; + debug9.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG9); + return debug9.cn38xx.doorbell; + } else { + union cvmx_pko_mem_debug8 debug8; + debug8.u64 = cvmx_read_csr(CVMX_PKO_MEM_DEBUG8); + return debug8.cn50xx.doorbell; + } + case CVMX_CMD_QUEUE_ZIP: + case CVMX_CMD_QUEUE_DFA: + case CVMX_CMD_QUEUE_RAID: + /* FIXME: Implement other lengths */ + return 0; + case CVMX_CMD_QUEUE_DMA_BASE: + { + union cvmx_npei_dmax_counts dmax_counts; + dmax_counts.u64 = + cvmx_read_csr(CVMX_PEXP_NPEI_DMAX_COUNTS + (queue_id & 0x7)); + return dmax_counts.s.dbell; + } + case CVMX_CMD_QUEUE_END: + return CVMX_CMD_QUEUE_INVALID_PARAM; + } + return CVMX_CMD_QUEUE_INVALID_PARAM; +} + +/** + * Return the command buffer to be written to. The purpose of this + * function is to allow CVMX routine access t othe low level buffer + * for initial hardware setup. User applications should not call this + * function directly. + * + * @queue_id: Command queue to query + * + * Returns Command buffer or NULL on failure + */ +void *cvmx_cmd_queue_buffer(cvmx_cmd_queue_id_t queue_id) +{ + __cvmx_cmd_queue_state_t *qptr = __cvmx_cmd_queue_get_state(queue_id); + if (qptr && qptr->base_ptr_div128) + return cvmx_phys_to_ptr((uint64_t) qptr->base_ptr_div128 << 7); + else + return NULL; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c new file mode 100644 index 000000000..9b791ccf8 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -0,0 +1,348 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Helper functions to abstract board specific data about + * network ports from the rest of the cvmx-helper files. + */ + +#include <linux/bug.h> +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-bootinfo.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-util.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> + +/** + * Return the MII PHY address associated with the given IPD + * port. A result of -1 means there isn't a MII capable PHY + * connected to this port. On chips supporting multiple MII + * busses the bus number is encoded in bits <15:8>. + * + * This function must be modified for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It replies on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @ipd_port: Octeon IPD port to get the MII address for. + * + * Returns MII PHY address and bus number or -1. + */ +int cvmx_helper_board_get_mii_address(int ipd_port) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_SIM: + /* Simulator doesn't have MII */ + return -1; + case CVMX_BOARD_TYPE_EBT3000: + case CVMX_BOARD_TYPE_EBT5800: + case CVMX_BOARD_TYPE_THUNDER: + case CVMX_BOARD_TYPE_NICPRO2: + /* Interface 0 is SPI4, interface 1 is RGMII */ + if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16; + else + return -1; + case CVMX_BOARD_TYPE_KODAMA: + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_HIKARI: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* + * Port 0 is WAN connected to a PHY, Port 1 is GMII + * connected to a switch + */ + if (ipd_port == 0) + return 4; + else if (ipd_port == 1) + return 9; + else + return -1; + case CVMX_BOARD_TYPE_NAC38: + /* Board has 8 RGMII ports PHYs are 0-7 */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port; + else if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16 + 4; + else + return -1; + case CVMX_BOARD_TYPE_EBH3000: + /* Board has dual SPI4 and no PHYs */ + return -1; + case CVMX_BOARD_TYPE_EBH5200: + case CVMX_BOARD_TYPE_EBH5201: + case CVMX_BOARD_TYPE_EBT5200: + /* Board has 2 management ports */ + if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && + (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2))) + return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT; + /* + * Board has 4 SGMII ports. The PHYs start right after the MII + * ports MII0 = 0, MII1 = 1, SGMII = 2-5. + */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port + 2; + else + return -1; + case CVMX_BOARD_TYPE_EBH5600: + case CVMX_BOARD_TYPE_EBH5601: + case CVMX_BOARD_TYPE_EBH5610: + /* Board has 1 management port */ + if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT) + return 0; + /* + * Board has 8 SGMII ports. 4 connect out, two connect + * to a switch, and 2 loop to each other + */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port + 1; + else + return -1; + case CVMX_BOARD_TYPE_CUST_NB5: + if (ipd_port == 2) + return 4; + else + return -1; + case CVMX_BOARD_TYPE_NIC_XLE_4G: + /* Board has 4 SGMII ports. connected QLM3(interface 1) */ + if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16 + 1; + else + return -1; + case CVMX_BOARD_TYPE_NIC_XLE_10G: + case CVMX_BOARD_TYPE_NIC10E: + return -1; + case CVMX_BOARD_TYPE_NIC4E: + if (ipd_port >= 0 && ipd_port <= 3) + return (ipd_port + 0x1f) & 0x1f; + else + return -1; + case CVMX_BOARD_TYPE_NIC2E: + if (ipd_port >= 0 && ipd_port <= 1) + return ipd_port + 1; + else + return -1; + case CVMX_BOARD_TYPE_BBGW_REF: + /* + * No PHYs are connected to Octeon, everything is + * through switch. + */ + return -1; + + case CVMX_BOARD_TYPE_CUST_WSX16: + if (ipd_port >= 0 && ipd_port <= 3) + return ipd_port; + else if (ipd_port >= 16 && ipd_port <= 19) + return ipd_port - 16 + 4; + else + return -1; + case CVMX_BOARD_TYPE_UBNT_E100: + if (ipd_port >= 0 && ipd_port <= 2) + return 7 - ipd_port; + else + return -1; + case CVMX_BOARD_TYPE_KONTRON_S1901: + if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT) + return 1; + else + return -1; + + } + + /* Some unknown board. Somebody forgot to update this function... */ + cvmx_dprintf + ("cvmx_helper_board_get_mii_address: Unknown board type %d\n", + cvmx_sysinfo_get()->board_type); + return -1; +} + +/** + * This function is the board specific method of determining an + * ethernet ports link speed. Most Octeon boards have Marvell PHYs + * and are handled by the fall through case. This function must be + * updated for boards that don't have the normal Marvell PHYs. + * + * This function must be modified for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It relies on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @ipd_port: IPD input port associated with the port we want to get link + * status for. + * + * Returns The ports link status. If the link isn't fully resolved, this must + * return zero. + */ +union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port) +{ + union cvmx_helper_link_info result; + + WARN_ONCE(!octeon_is_simulation(), + "Using deprecated link status - please update your DT"); + + /* Unless we fix it later, all links are defaulted to down */ + result.u64 = 0; + + if (octeon_is_simulation()) { + /* The simulator gives you a simulated 1Gbps full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + if (OCTEON_IS_MODEL(OCTEON_CN3XXX) + || OCTEON_IS_MODEL(OCTEON_CN58XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * We don't have a PHY address, so attempt to use + * in-band status. It is really important that boards + * not supporting in-band status never get + * here. Reading broken in-band status tends to do bad + * things + */ + union cvmx_gmxx_rxx_rx_inbnd inband_status; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + inband_status.u64 = + cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface)); + + result.s.link_up = inband_status.s.status; + result.s.full_duplex = inband_status.s.duplex; + switch (inband_status.s.speed) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.u64 = 0; + break; + } + } else { + /* + * We don't have a PHY address and we don't have + * in-band status. There is no way to determine the + * link speed. Return down assuming this port isn't + * wired + */ + result.u64 = 0; + } + + /* If link is down, return all fields as zero. */ + if (!result.s.link_up) + result.u64 = 0; + + return result; +} + +/** + * This function is called by cvmx_helper_interface_probe() after it + * determines the number of ports Octeon can support on a specific + * interface. This function is the per board location to override + * this value. It is called with the number of ports Octeon might + * support and should return the number of actual ports on the + * board. + * + * This function must be modifed for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It relys on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @interface: Interface to probe + * @supported_ports: + * Number of ports Octeon supports. + * + * Returns Number of ports the actual board supports. Many times this will + * simple be "support_ports". + */ +int __cvmx_helper_board_interface_probe(int interface, int supported_ports) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + if (interface == 0) + return 2; + break; + case CVMX_BOARD_TYPE_BBGW_REF: + if (interface == 0) + return 2; + break; + case CVMX_BOARD_TYPE_NIC_XLE_4G: + if (interface == 0) + return 0; + break; + /* The 2nd interface on the EBH5600 is connected to the Marvel switch, + which we don't support. Disable ports connected to it */ + case CVMX_BOARD_TYPE_EBH5600: + if (interface == 1) + return 0; + break; + } + return supported_ports; +} + +/** + * Get the clock type used for the USB block based on board type. + * Used by the USB code for auto configuration of clock type. + * + * Return USB clock type enumeration + */ +enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_BBGW_REF: + case CVMX_BOARD_TYPE_LANAI2_A: + case CVMX_BOARD_TYPE_LANAI2_U: + case CVMX_BOARD_TYPE_LANAI2_G: + case CVMX_BOARD_TYPE_NIC10E_66: + case CVMX_BOARD_TYPE_UBNT_E100: + return USB_CLOCK_TYPE_CRYSTAL_12; + case CVMX_BOARD_TYPE_NIC10E: + return USB_CLOCK_TYPE_REF_12; + default: + break; + } + /* Most boards except NIC10e use a 12MHz crystal */ + if (OCTEON_IS_OCTEON2()) + return USB_CLOCK_TYPE_CRYSTAL_12; + return USB_CLOCK_TYPE_REF_48; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c new file mode 100644 index 000000000..4b26fedec --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-errata.c @@ -0,0 +1,73 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Fixes and workaround for Octeon chip errata. This file + * contains functions called by cvmx-helper to workaround known + * chip errata. For the most part, code doesn't need to call + * these functions directly. + * + */ +#include <linux/export.h> + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-helper-jtag.h> + +/** + * Due to errata G-720, the 2nd order CDR circuit on CN52XX pass + * 1 doesn't work properly. The following code disables 2nd order + * CDR for the specified QLM. + * + * @qlm: QLM to disable 2nd order CDR for. + */ +void __cvmx_helper_errata_qlm_disable_2nd_order_cdr(int qlm) +{ + int lane; + cvmx_helper_qlm_jtag_init(); + /* We need to load all four lanes of the QLM, a total of 1072 bits */ + for (lane = 0; lane < 4; lane++) { + /* + * Each lane has 268 bits. We need to set + * cfg_cdr_incx<67:64> = 3 and cfg_cdr_secord<77> = + * 1. All other bits are zero. Bits go in LSB first, + * so start off with the zeros for bits <63:0>. + */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 63 - 0 + 1); + /* cfg_cdr_incx<67:64>=3 */ + cvmx_helper_qlm_jtag_shift(qlm, 67 - 64 + 1, 3); + /* Zeros for bits <76:68> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 76 - 68 + 1); + /* cfg_cdr_secord<77>=1 */ + cvmx_helper_qlm_jtag_shift(qlm, 77 - 77 + 1, 1); + /* Zeros for bits <267:78> */ + cvmx_helper_qlm_jtag_shift_zeros(qlm, 267 - 78 + 1); + } + cvmx_helper_qlm_jtag_update(qlm); +} +EXPORT_SYMBOL(__cvmx_helper_errata_qlm_disable_2nd_order_cdr); diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c new file mode 100644 index 000000000..607b4e659 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -0,0 +1,144 @@ + +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/** + * + * Helper utilities for qlm_jtag. + * + */ + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-helper-jtag.h> + + +/** + * Initialize the internal QLM JTAG logic to allow programming + * of the JTAG chain by the cvmx_helper_qlm_jtag_*() functions. + * These functions should only be used at the direction of Cavium + * Networks. Programming incorrect values into the JTAG chain + * can cause chip damage. + */ +void cvmx_helper_qlm_jtag_init(void) +{ + union cvmx_ciu_qlm_jtgc jtgc; + uint32_t clock_div = 0; + uint32_t divisor = cvmx_sysinfo_get()->cpu_clock_hz / (25 * 1000000); + divisor = (divisor - 1) >> 2; + /* Convert the divisor into a power of 2 shift */ + while (divisor) { + clock_div++; + divisor = divisor >> 1; + } + + /* + * Clock divider for QLM JTAG operations. eclk is divided by + * 2^(CLK_DIV + 2) + */ + jtgc.u64 = 0; + jtgc.s.clk_div = clock_div; + jtgc.s.mux_sel = 0; + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + jtgc.s.bypass = 0x3; + else + jtgc.s.bypass = 0xf; + cvmx_write_csr(CVMX_CIU_QLM_JTGC, jtgc.u64); + cvmx_read_csr(CVMX_CIU_QLM_JTGC); +} + +/** + * Write up to 32bits into the QLM jtag chain. Bits are shifted + * into the MSB and out the LSB, so you should shift in the low + * order bits followed by the high order bits. The JTAG chain is + * 4 * 268 bits long, or 1072. + * + * @qlm: QLM to shift value into + * @bits: Number of bits to shift in (1-32). + * @data: Data to shift in. Bit 0 enters the chain first, followed by + * bit 1, etc. + * + * Returns The low order bits of the JTAG chain that shifted out of the + * circle. + */ +uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) +{ + union cvmx_ciu_qlm_jtgd jtgd; + jtgd.u64 = 0; + jtgd.s.shift = 1; + jtgd.s.shft_cnt = bits - 1; + jtgd.s.shft_reg = data; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.shift); + return jtgd.s.shft_reg >> (32 - bits); +} + +/** + * Shift long sequences of zeros into the QLM JTAG chain. It is + * common to need to shift more than 32 bits of zeros into the + * chain. This function is a convience wrapper around + * cvmx_helper_qlm_jtag_shift() to shift more than 32 bits of + * zeros at a time. + * + * @qlm: QLM to shift zeros into + * @bits: + */ +void cvmx_helper_qlm_jtag_shift_zeros(int qlm, int bits) +{ + while (bits > 0) { + int n = bits; + if (n > 32) + n = 32; + cvmx_helper_qlm_jtag_shift(qlm, n, 0); + bits -= n; + } +} + +/** + * Program the QLM JTAG chain into all lanes of the QLM. You must + * have already shifted in 268*4, or 1072 bits into the JTAG + * chain. Updating invalid values can possibly cause chip damage. + * + * @qlm: QLM to program + */ +void cvmx_helper_qlm_jtag_update(int qlm) +{ + union cvmx_ciu_qlm_jtgd jtgd; + + /* Update the new data */ + jtgd.u64 = 0; + jtgd.s.update = 1; + if (!OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + jtgd.s.select = 1 << qlm; + cvmx_write_csr(CVMX_CIU_QLM_JTGD, jtgd.u64); + do { + jtgd.u64 = cvmx_read_csr(CVMX_CIU_QLM_JTGD); + } while (jtgd.s.update); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-loop.c b/arch/mips/cavium-octeon/executive/cvmx-helper-loop.c new file mode 100644 index 000000000..bfbd46115 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-loop.c @@ -0,0 +1,85 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for LOOP initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-pip-defs.h> + +/** + * Probe a LOOP interface and determine the number of ports + * connected to it. The LOOP interface should still be down + * after this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_loop_probe(int interface) +{ + union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs; + int num_ports = 4; + int port; + + /* We need to disable length checking so packet < 64 bytes and jumbo + frames don't get errors */ + for (port = 0; port < num_ports; port++) { + union cvmx_pip_prt_cfgx port_cfg; + int ipd_port = cvmx_helper_get_ipd_port(interface, port); + port_cfg.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_cfg.s.maxerr_en = 0; + port_cfg.s.minerr_en = 0; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_cfg.u64); + } + + /* Disable FCS stripping for loopback ports */ + ipd_sub_port_fcs.u64 = cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS); + ipd_sub_port_fcs.s.port_bit2 = 0; + cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, ipd_sub_port_fcs.u64); + return num_ports; +} + +/** + * Bringup and enable a LOOP interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_loop_enable(int interface) +{ + /* Do nothing. */ + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c new file mode 100644 index 000000000..cb210d2ef --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-npi.c @@ -0,0 +1,101 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for NPI initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pip-defs.h> + +/** + * Probe a NPI interface and determine the number of ports + * connected to it. The NPI interface should still be down + * after this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_npi_probe(int interface) +{ +#if CVMX_PKO_QUEUES_PER_PORT_PCI > 0 + if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) + return 4; + else if (OCTEON_IS_MODEL(OCTEON_CN56XX) + && !OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)) + /* The packet engines didn't exist before pass 2 */ + return 4; + else if (OCTEON_IS_MODEL(OCTEON_CN52XX) + && !OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) + /* The packet engines didn't exist before pass 2 */ + return 4; +#endif + return 0; +} + +/** + * Bringup and enable a NPI interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_npi_enable(int interface) +{ + /* + * On CN50XX, CN52XX, and CN56XX we need to disable length + * checking so packet < 64 bytes and jumbo frames don't get + * errors. + */ + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && + !OCTEON_IS_MODEL(OCTEON_CN58XX)) { + int num_ports = cvmx_helper_ports_on_interface(interface); + int port; + for (port = 0; port < num_ports; port++) { + union cvmx_pip_prt_cfgx port_cfg; + int ipd_port = + cvmx_helper_get_ipd_port(interface, port); + port_cfg.u64 = + cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_cfg.s.maxerr_en = 0; + port_cfg.s.minerr_en = 0; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), + port_cfg.u64); + } + } + + /* Enables are controlled by the remote host, so nothing to do here */ + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c new file mode 100644 index 000000000..c4b58598a --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c @@ -0,0 +1,451 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for RGMII/GMII/MII initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> +#include <asm/octeon/cvmx-dbg-defs.h> + +/** + * Probe RGMII ports and determine the number present + * + * @interface: Interface to probe + * + * Returns Number of RGMII/GMII/MII ports (0-4). + */ +int __cvmx_helper_rgmii_probe(int interface) +{ + int num_ports = 0; + union cvmx_gmxx_inf_mode mode; + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (mode.s.type) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + cvmx_dprintf("ERROR: RGMII initialize called in " + "SPI interface\n"); + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * On these chips "type" says we're in + * GMII/MII mode. This limits us to 2 ports + */ + num_ports = 2; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); + } + } else { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + num_ports = 4; + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + num_ports = 3; + } else { + cvmx_dprintf("ERROR: Unsupported Octeon model in %s\n", + __func__); + } + } + return num_ports; +} + +/** + * Put an RGMII interface in loopback mode. Internal packets sent + * out will be received back again on the same port. Externally + * received packets will echo back out. + * + * @port: IPD port number to loop. + */ +void cvmx_helper_rgmii_internal_loopback(int port) +{ + int interface = (port >> 4) & 1; + int index = port & 0xf; + uint64_t tmp; + + union cvmx_gmxx_prtx_cfg gmx_cfg; + gmx_cfg.u64 = 0; + gmx_cfg.s.duplex = 1; + gmx_cfg.s.slottime = 1; + gmx_cfg.s.speed = 1; + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); + tmp = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(interface), (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), (1 << index) | tmp); + tmp = cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), (1 << index) | tmp); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64); +} + +/** + * Workaround ASX setup errata with CN38XX pass1 + * + * @interface: Interface to setup + * @port: Port to setup (0..3) + * @cpu_clock_hz: + * Chip frequency in Hertz + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_errata_asx_pass1(int interface, int port, + int cpu_clock_hz) +{ + /* Set hi water mark as per errata GMX-4 */ + if (cpu_clock_hz >= 325000000 && cpu_clock_hz < 375000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 12); + else if (cpu_clock_hz >= 375000000 && cpu_clock_hz < 437000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 11); + else if (cpu_clock_hz >= 437000000 && cpu_clock_hz < 550000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 10); + else if (cpu_clock_hz >= 550000000 && cpu_clock_hz < 687000000) + cvmx_write_csr(CVMX_ASXX_TX_HI_WATERX(port, interface), 9); + else + cvmx_dprintf("Illegal clock frequency (%d). " + "CVMX_ASXX_TX_HI_WATERX not set\n", cpu_clock_hz); + return 0; +} + +/** + * Configure all of the ASX, GMX, and PKO registers required + * to get RGMII to function on the supplied interface. + * + * @interface: PKO Interface to configure (0 or 1) + * + * Returns Zero on success + */ +int __cvmx_helper_rgmii_enable(int interface) +{ + int num_ports = cvmx_helper_ports_on_interface(interface); + int port; + struct cvmx_sysinfo *sys_info_ptr = cvmx_sysinfo_get(); + union cvmx_gmxx_inf_mode mode; + union cvmx_asxx_tx_prt_en asx_tx; + union cvmx_asxx_rx_prt_en asx_rx; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (mode.s.en == 0) + return -1; + if ((OCTEON_IS_MODEL(OCTEON_CN38XX) || + OCTEON_IS_MODEL(OCTEON_CN58XX)) && mode.s.type == 1) + /* Ignore SPI interfaces */ + return -1; + + /* Configure the ASX registers needed to use the RGMII ports */ + asx_tx.u64 = 0; + asx_tx.s.prt_en = cvmx_build_mask(num_ports); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(interface), asx_tx.u64); + + asx_rx.u64 = 0; + asx_rx.s.prt_en = cvmx_build_mask(num_ports); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), asx_rx.u64); + + /* Configure the GMX registers needed to use the RGMII ports */ + for (port = 0; port < num_ports; port++) { + /* Setting of CVMX_GMXX_TXX_THRESH has been moved to + __cvmx_helper_setup_gmx() */ + + if (cvmx_octeon_is_pass1()) + __cvmx_helper_errata_asx_pass1(interface, port, + sys_info_ptr-> + cpu_clock_hz); + else { + /* + * Configure more flexible RGMII preamble + * checking. Pass 1 doesn't support this + * feature. + */ + union cvmx_gmxx_rxx_frm_ctl frm_ctl; + frm_ctl.u64 = + cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL + (port, interface)); + /* New field, so must be compile time */ + frm_ctl.s.pre_free = 1; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(port, interface), + frm_ctl.u64); + } + + /* + * Each pause frame transmitted will ask for about 10M + * bit times before resume. If buffer space comes + * available before that time has expired, an XON + * pause frame (0 time) will be transmitted to restart + * the flow. + */ + cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_TIME(port, interface), + 20000); + cvmx_write_csr(CVMX_GMXX_TXX_PAUSE_PKT_INTERVAL + (port, interface), 19000); + + if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), + 16); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), + 16); + } else { + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(port, interface), + 24); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(port, interface), + 24); + } + } + + __cvmx_helper_setup_gmx(interface, num_ports); + + /* enable the ports now */ + for (port = 0; port < num_ports; port++) { + union cvmx_gmxx_prtx_cfg gmx_cfg; + + gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(port, interface)); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(port, interface), + gmx_cfg.u64); + } + __cvmx_interrupt_asxx_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +union cvmx_helper_link_info __cvmx_helper_rgmii_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_asxx_prt_loop asxx_prt_loop; + + asxx_prt_loop.u64 = cvmx_read_csr(CVMX_ASXX_PRT_LOOP(interface)); + if (asxx_prt_loop.s.int_loop & (1 << index)) { + /* Force 1Gbps full duplex on internal loopback */ + union cvmx_helper_link_info result; + result.u64 = 0; + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + return result; + } else + return __cvmx_helper_board_link_get(ipd_port); +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_rgmii_link_set(int ipd_port, + union cvmx_helper_link_info link_info) +{ + int result = 0; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_gmxx_prtx_cfg original_gmx_cfg; + union cvmx_gmxx_prtx_cfg new_gmx_cfg; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos; + union cvmx_pko_mem_queue_qos pko_mem_queue_qos_save[16]; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp; + union cvmx_gmxx_tx_ovr_bp gmx_tx_ovr_bp_save; + int i; + + /* Ignore speed sets in the simulator */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) + return 0; + + /* Read the current settings so we know the current enable state */ + original_gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + new_gmx_cfg = original_gmx_cfg; + + /* Disable the lowest level RX */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) & + ~(1 << index)); + + memset(pko_mem_queue_qos_save, 0, sizeof(pko_mem_queue_qos_save)); + /* Disable all queues so that TX should become idle */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); + pko_mem_queue_qos.u64 = cvmx_read_csr(CVMX_PKO_MEM_QUEUE_QOS); + pko_mem_queue_qos.s.pid = ipd_port; + pko_mem_queue_qos.s.qid = queue; + pko_mem_queue_qos_save[i] = pko_mem_queue_qos; + pko_mem_queue_qos.s.qos_mask = 0; + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, pko_mem_queue_qos.u64); + } + + /* Disable backpressure */ + gmx_tx_ovr_bp.u64 = cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); + gmx_tx_ovr_bp_save = gmx_tx_ovr_bp; + gmx_tx_ovr_bp.s.bp &= ~(1 << index); + gmx_tx_ovr_bp.s.en |= 1 << index; + cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp.u64); + cvmx_read_csr(CVMX_GMXX_TX_OVR_BP(interface)); + + /* + * Poll the GMX state machine waiting for it to become + * idle. Preferably we should only change speed when it is + * idle. If it doesn't become idle we will still do the speed + * change, but there is a slight chance that GMX will + * lockup. + */ + cvmx_write_csr(CVMX_NPI_DBG_SELECT, + interface * 0x800 + index * 0x100 + 0x880); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 7, + ==, 0, 10000); + CVMX_WAIT_FOR_FIELD64(CVMX_DBG_DATA, union cvmx_dbg_data, data & 0xf, + ==, 0, 10000); + + /* Disable the port before we make any changes */ + new_gmx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Set full/half duplex */ + if (cvmx_octeon_is_pass1()) + /* Half duplex is broken for 38XX Pass 1 */ + new_gmx_cfg.s.duplex = 1; + else if (!link_info.s.link_up) + /* Force full duplex on down links */ + new_gmx_cfg.s.duplex = 1; + else + new_gmx_cfg.s.duplex = link_info.s.full_duplex; + + /* Set the link speed. Anything unknown is set to 1Gbps */ + if (link_info.s.speed == 10) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else if (link_info.s.speed == 100) { + new_gmx_cfg.s.slottime = 0; + new_gmx_cfg.s.speed = 0; + } else { + new_gmx_cfg.s.slottime = 1; + new_gmx_cfg.s.speed = 1; + } + + /* Adjust the clocks */ + if (link_info.s.speed == 10) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 50); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else if (link_info.s.speed == 100) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 5); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x40); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + } else { + cvmx_write_csr(CVMX_GMXX_TXX_CLK(index, interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 0x200); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0x2000); + } + + if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + if ((link_info.s.speed == 10) || (link_info.s.speed == 100)) { + union cvmx_gmxx_inf_mode mode; + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + /* + * Port .en .type .p0mii Configuration + * ---- --- ----- ------ ----------------------------------------- + * X 0 X X All links are disabled. + * 0 1 X 0 Port 0 is RGMII + * 0 1 X 1 Port 0 is MII + * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. + * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or + * MII port is selected by GMX_PRT1_CFG[SPEED]. + */ + + /* In MII mode, CLK_CNT = 1. */ + if (((index == 0) && (mode.s.p0mii == 1)) + || ((index != 0) && (mode.s.type == 1))) { + cvmx_write_csr(CVMX_GMXX_TXX_CLK + (index, interface), 1); + } + } + } + + /* Do a read to make sure all setup stuff is complete */ + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Save the new GMX setting without enabling the port */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + /* Enable the lowest level RX */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(interface), + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(interface)) | (1 << + index)); + + /* Re-enable the TX path */ + for (i = 0; i < cvmx_pko_get_num_queues(ipd_port); i++) { + int queue = cvmx_pko_get_base_queue(ipd_port) + i; + cvmx_write_csr(CVMX_PKO_REG_READ_IDX, queue); + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_QOS, + pko_mem_queue_qos_save[i].u64); + } + + /* Restore backpressure */ + cvmx_write_csr(CVMX_GMXX_TX_OVR_BP(interface), gmx_tx_ovr_bp_save.u64); + + /* Restore the GMX enable state. Port config is complete */ + new_gmx_cfg.s.en = original_gmx_cfg.s.en; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), new_gmx_cfg.u64); + + return result; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c new file mode 100644 index 000000000..e07d8f15e --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -0,0 +1,515 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for SGMII initialization, configuration, + * and monitoring. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> + +/** + * Perform initialization required only once for an SGMII port. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_one_time(int interface, int index) +{ + const uint64_t clock_mhz = cvmx_sysinfo_get()->cpu_clock_hz / 1000000; + union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg; + union cvmx_pcsx_linkx_timer_count_reg pcsx_linkx_timer_count_reg; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + + /* Disable GMX */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + gmxx_prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* + * Write PCS*_LINK*_TIMER_COUNT_REG[COUNT] with the + * appropriate value. 1000BASE-X specifies a 10ms + * interval. SGMII specifies a 1.6ms interval. + */ + pcs_misc_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + pcsx_linkx_timer_count_reg.u64 = + cvmx_read_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface)); + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + pcsx_linkx_timer_count_reg.s.count = + (10000ull * clock_mhz) >> 10; + } else { + /* SGMII */ + pcsx_linkx_timer_count_reg.s.count = + (1600ull * clock_mhz) >> 10; + } + cvmx_write_csr(CVMX_PCSX_LINKX_TIMER_COUNT_REG(index, interface), + pcsx_linkx_timer_count_reg.u64); + + /* + * Write the advertisement register to be used as the + * tx_Config_Reg<D15:D0> of the autonegotiation. In + * 1000BASE-X mode, tx_Config_Reg<D15:D0> is PCS*_AN*_ADV_REG. + * In SGMII PHY mode, tx_Config_Reg<D15:D0> is + * PCS*_SGM*_AN_ADV_REG. In SGMII MAC mode, + * tx_Config_Reg<D15:D0> is the fixed value 0x4001, so this + * step can be skipped. + */ + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + union cvmx_pcsx_anx_adv_reg pcsx_anx_adv_reg; + pcsx_anx_adv_reg.u64 = + cvmx_read_csr(CVMX_PCSX_ANX_ADV_REG(index, interface)); + pcsx_anx_adv_reg.s.rem_flt = 0; + pcsx_anx_adv_reg.s.pause = 3; + pcsx_anx_adv_reg.s.hfd = 1; + pcsx_anx_adv_reg.s.fd = 1; + cvmx_write_csr(CVMX_PCSX_ANX_ADV_REG(index, interface), + pcsx_anx_adv_reg.u64); + } else { + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcsx_miscx_ctl_reg.s.mac_phy) { + /* PHY Mode */ + union cvmx_pcsx_sgmx_an_adv_reg pcsx_sgmx_an_adv_reg; + pcsx_sgmx_an_adv_reg.u64 = + cvmx_read_csr(CVMX_PCSX_SGMX_AN_ADV_REG + (index, interface)); + pcsx_sgmx_an_adv_reg.s.link = 1; + pcsx_sgmx_an_adv_reg.s.dup = 1; + pcsx_sgmx_an_adv_reg.s.speed = 2; + cvmx_write_csr(CVMX_PCSX_SGMX_AN_ADV_REG + (index, interface), + pcsx_sgmx_an_adv_reg.u64); + } else { + /* MAC Mode - Nothing to do */ + } + } + return 0; +} + +/** + * Initialize the SERTES link for the first time or after a loss + * of link. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_link(int interface, int index) +{ + union cvmx_pcsx_mrx_control_reg control_reg; + + /* + * Take PCS through a reset sequence. + * PCS*_MR*_CONTROL_REG[PWR_DN] should be cleared to zero. + * Write PCS*_MR*_CONTROL_REG[RESET]=1 (while not changing the + * value of the other PCS*_MR*_CONTROL_REG bits). Read + * PCS*_MR*_CONTROL_REG[RESET] until it changes value to + * zero. + */ + control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) { + control_reg.s.reset = 1; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + control_reg.u64); + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSX_MRX_CONTROL_REG(index, interface), + union cvmx_pcsx_mrx_control_reg, reset, ==, 0, 10000)) { + cvmx_dprintf("SGMII%d: Timeout waiting for port %d " + "to finish reset\n", + interface, index); + return -1; + } + } + + /* + * Write PCS*_MR*_CONTROL_REG[RST_AN]=1 to ensure a fresh + * sgmii negotiation starts. + */ + control_reg.s.rst_an = 1; + control_reg.s.an_en = 1; + control_reg.s.pwr_dn = 0; + cvmx_write_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface), + control_reg.u64); + + /* + * Wait for PCS*_MR*_STATUS_REG[AN_CPT] to be set, indicating + * that sgmii autonegotiation is complete. In MAC mode this + * isn't an ethernet link, but a link between Octeon and the + * PHY. + */ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + CVMX_WAIT_FOR_FIELD64(CVMX_PCSX_MRX_STATUS_REG(index, interface), + union cvmx_pcsx_mrx_status_reg, an_cpt, ==, 1, + 10000)) { + /* cvmx_dprintf("SGMII%d: Port %d link timeout\n", interface, index); */ + return -1; + } + return 0; +} + +/** + * Configure an SGMII link to the specified speed after the SERTES + * link is up. + * + * @interface: Interface to init + * @index: Index of prot on the interface + * @link_info: Link state to configure + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init_link_speed(int interface, + int index, + union cvmx_helper_link_info + link_info) +{ + int is_enabled; + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + + /* Disable GMX before we make any changes. Remember the enable state */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + is_enabled = gmxx_prtx_cfg.s.en; + gmxx_prtx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* Wait for GMX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(index, interface), union cvmx_gmxx_prtx_cfg, + rx_idle, ==, 1, 10000) + || CVMX_WAIT_FOR_FIELD64(CVMX_GMXX_PRTX_CFG(index, interface), + union cvmx_gmxx_prtx_cfg, tx_idle, ==, 1, + 10000)) { + cvmx_dprintf + ("SGMII%d: Timeout waiting for port %d to be idle\n", + interface, index); + return -1; + } + + /* Read GMX CFG again to make sure the disable completed */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* + * Get the misc control for PCS. We will need to set the + * duplication amount. + */ + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + + /* + * Use GMXENO to force the link down if the status we get says + * it should be down. + */ + pcsx_miscx_ctl_reg.s.gmxeno = !link_info.s.link_up; + + /* Only change the duplex setting if the link is up */ + if (link_info.s.link_up) + gmxx_prtx_cfg.s.duplex = link_info.s.full_duplex; + + /* Do speed based setting for GMX */ + switch (link_info.s.speed) { + case 10: + gmxx_prtx_cfg.s.speed = 0; + gmxx_prtx_cfg.s.speed_msb = 1; + gmxx_prtx_cfg.s.slottime = 0; + /* Setting from GMX-603 */ + pcsx_miscx_ctl_reg.s.samp_pt = 25; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + break; + case 100: + gmxx_prtx_cfg.s.speed = 0; + gmxx_prtx_cfg.s.speed_msb = 0; + gmxx_prtx_cfg.s.slottime = 0; + pcsx_miscx_ctl_reg.s.samp_pt = 0x5; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 64); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 0); + break; + case 1000: + gmxx_prtx_cfg.s.speed = 1; + gmxx_prtx_cfg.s.speed_msb = 0; + gmxx_prtx_cfg.s.slottime = 1; + pcsx_miscx_ctl_reg.s.samp_pt = 1; + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(index, interface), 512); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(index, interface), 8192); + break; + default: + break; + } + + /* Write the new misc control for PCS */ + cvmx_write_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface), + pcsx_miscx_ctl_reg.u64); + + /* Write the new GMX settings with the port still disabled */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + /* Read GMX CFG again to make sure the config completed */ + gmxx_prtx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + + /* Restore the enabled / disabled state */ + gmxx_prtx_cfg.s.en = is_enabled; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmxx_prtx_cfg.u64); + + return 0; +} + +/** + * Bring up the SGMII interface to be ready for packet I/O but + * leave I/O disabled using the GMX override. This function + * follows the bringup documented in 10.6.3 of the manual. + * + * @interface: Interface to bringup + * @num_ports: Number of ports on the interface + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_sgmii_hardware_init(int interface, int num_ports) +{ + int index; + + __cvmx_helper_setup_gmx(interface, num_ports); + + for (index = 0; index < num_ports; index++) { + int ipd_port = cvmx_helper_get_ipd_port(interface, index); + __cvmx_helper_sgmii_hardware_init_one_time(interface, index); + /* Linux kernel driver will call ....link_set with the + * proper link state. In the simulator there is no + * link state polling and hence it is set from + * here. + */ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) + __cvmx_helper_sgmii_link_set(ipd_port, + __cvmx_helper_sgmii_link_get(ipd_port)); + } + + return 0; +} + +int __cvmx_helper_sgmii_enumerate(int interface) +{ + return 4; +} +/** + * Probe a SGMII interface and determine the number of ports + * connected to it. The SGMII interface should still be down after + * this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_sgmii_probe(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + /* + * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the + * interface needs to be enabled before IPD otherwise per port + * backpressure may not work properly + */ + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + mode.s.en = 1; + cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); + return __cvmx_helper_sgmii_enumerate(interface); +} + +/** + * Bringup and enable a SGMII interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_sgmii_enable(int interface) +{ + int num_ports = cvmx_helper_ports_on_interface(interface); + int index; + + __cvmx_helper_sgmii_hardware_init(interface, num_ports); + + for (index = 0; index < num_ports; index++) { + union cvmx_gmxx_prtx_cfg gmxx_prtx_cfg; + gmxx_prtx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface)); + gmxx_prtx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), + gmxx_prtx_cfg.u64); + __cvmx_interrupt_pcsx_intx_en_reg_enable(index, interface); + } + __cvmx_interrupt_pcsxx_int_en_reg_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +union cvmx_helper_link_info __cvmx_helper_sgmii_link_get(int ipd_port) +{ + union cvmx_helper_link_info result; + union cvmx_pcsx_miscx_ctl_reg pcs_misc_ctl_reg; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + union cvmx_pcsx_mrx_control_reg pcsx_mrx_control_reg; + + result.u64 = 0; + + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) { + /* The simulator gives you a simulated 1Gbps full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + pcsx_mrx_control_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_CONTROL_REG(index, interface)); + if (pcsx_mrx_control_reg.s.loopbck1) { + /* Force 1Gbps full duplex link for internal loopback */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + + pcs_misc_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcs_misc_ctl_reg.s.mode) { + /* 1000BASE-X */ + /* FIXME */ + } else { + union cvmx_pcsx_miscx_ctl_reg pcsx_miscx_ctl_reg; + pcsx_miscx_ctl_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MISCX_CTL_REG(index, interface)); + if (pcsx_miscx_ctl_reg.s.mac_phy) { + /* PHY Mode */ + union cvmx_pcsx_mrx_status_reg pcsx_mrx_status_reg; + union cvmx_pcsx_anx_results_reg pcsx_anx_results_reg; + + /* + * Don't bother continuing if the SERTES low + * level link is down + */ + pcsx_mrx_status_reg.u64 = + cvmx_read_csr(CVMX_PCSX_MRX_STATUS_REG + (index, interface)); + if (pcsx_mrx_status_reg.s.lnk_st == 0) { + if (__cvmx_helper_sgmii_hardware_init_link + (interface, index) != 0) + return result; + } + + /* Read the autoneg results */ + pcsx_anx_results_reg.u64 = + cvmx_read_csr(CVMX_PCSX_ANX_RESULTS_REG + (index, interface)); + if (pcsx_anx_results_reg.s.an_cpt) { + /* + * Auto negotiation is complete. Set + * status accordingly. + */ + result.s.full_duplex = + pcsx_anx_results_reg.s.dup; + result.s.link_up = + pcsx_anx_results_reg.s.link_ok; + switch (pcsx_anx_results_reg.s.spd) { + case 0: + result.s.speed = 10; + break; + case 1: + result.s.speed = 100; + break; + case 2: + result.s.speed = 1000; + break; + default: + result.s.speed = 0; + result.s.link_up = 0; + break; + } + } else { + /* + * Auto negotiation isn't + * complete. Return link down. + */ + result.s.speed = 0; + result.s.link_up = 0; + } + } else { /* MAC Mode */ + + result = __cvmx_helper_board_link_get(ipd_port); + } + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_sgmii_link_set(int ipd_port, + union cvmx_helper_link_info link_info) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + __cvmx_helper_sgmii_hardware_init_link(interface, index); + return __cvmx_helper_sgmii_hardware_init_link_speed(interface, index, + link_info); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c new file mode 100644 index 000000000..525914e9b --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -0,0 +1,202 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for SPI initialization, configuration, + * and monitoring. + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-spi.h> +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pip-defs.h> +#include <asm/octeon/cvmx-pko-defs.h> +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> + +/* + * CVMX_HELPER_SPI_TIMEOUT is used to determine how long the SPI + * initialization routines wait for SPI training. You can override the + * value using executive-config.h if necessary. + */ +#ifndef CVMX_HELPER_SPI_TIMEOUT +#define CVMX_HELPER_SPI_TIMEOUT 10 +#endif + +int __cvmx_helper_spi_enumerate(int interface) +{ + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + return 10; + } else { + return 16; + } +} + +/** + * Probe a SPI interface and determine the number of ports + * connected to it. The SPI interface should still be down after + * this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_spi_probe(int interface) +{ + int num_ports = 0; + + if ((cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) && + cvmx_spi4000_is_present(interface)) { + num_ports = 10; + } else { + union cvmx_pko_reg_crc_enable enable; + num_ports = 16; + /* + * Unlike the SPI4000, most SPI devices don't + * automatically put on the L2 CRC. For everything + * except for the SPI4000 have PKO append the L2 CRC + * to the packet. + */ + enable.u64 = cvmx_read_csr(CVMX_PKO_REG_CRC_ENABLE); + enable.s.enable |= 0xffff << (interface * 16); + cvmx_write_csr(CVMX_PKO_REG_CRC_ENABLE, enable.u64); + } + __cvmx_helper_setup_gmx(interface, num_ports); + return num_ports; +} + +/** + * Bringup and enable a SPI interface. After this call packet I/O + * should be fully functional. This is called with IPD enabled but + * PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_spi_enable(int interface) +{ + /* + * Normally the ethernet L2 CRC is checked and stripped in the + * GMX block. When you are using SPI, this isn' the case and + * IPD needs to check the L2 CRC. + */ + int num_ports = cvmx_helper_ports_on_interface(interface); + int ipd_port; + for (ipd_port = interface * 16; ipd_port < interface * 16 + num_ports; + ipd_port++) { + union cvmx_pip_prt_cfgx port_config; + port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + port_config.s.crc_en = 1; + cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64); + } + + if (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM) { + cvmx_spi_start_interface(interface, CVMX_SPI_MODE_DUPLEX, + CVMX_HELPER_SPI_TIMEOUT, num_ports); + if (cvmx_spi4000_is_present(interface)) + cvmx_spi4000_initialize(interface); + } + __cvmx_interrupt_spxx_int_msk_enable(interface); + __cvmx_interrupt_stxx_int_msk_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +union cvmx_helper_link_info __cvmx_helper_spi_link_get(int ipd_port) +{ + union cvmx_helper_link_info result; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + result.u64 = 0; + + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM) { + /* The simulator gives you a simulated full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } else if (cvmx_spi4000_is_present(interface)) { + union cvmx_gmxx_rxx_rx_inbnd inband = + cvmx_spi4000_check_speed(interface, index); + result.s.link_up = inband.s.status; + result.s.full_duplex = inband.s.duplex; + switch (inband.s.speed) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.s.speed = 0; + result.s.link_up = 0; + break; + } + } else { + /* For generic SPI we can't determine the link, just return some + sane results */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_spi_link_set(int ipd_port, union cvmx_helper_link_info link_info) +{ + /* Nothing to do. If we have a SPI4000 then the setup was already performed + by cvmx_spi4000_check_speed(). If not then there isn't any link + info */ + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c new file mode 100644 index 000000000..53b912745 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -0,0 +1,363 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Small helper utilities. + */ +#include <linux/kernel.h> + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-pip.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-ipd.h> +#include <asm/octeon/cvmx-spi.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-util.h> + +#include <asm/octeon/cvmx-ipd-defs.h> + +/** + * Convert a interface mode into a human readable string + * + * @mode: Mode to convert + * + * Returns String + */ +const char *cvmx_helper_interface_mode_to_string(cvmx_helper_interface_mode_t + mode) +{ + switch (mode) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + return "DISABLED"; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + return "RGMII"; + case CVMX_HELPER_INTERFACE_MODE_GMII: + return "GMII"; + case CVMX_HELPER_INTERFACE_MODE_SPI: + return "SPI"; + case CVMX_HELPER_INTERFACE_MODE_PCIE: + return "PCIE"; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + return "XAUI"; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + return "SGMII"; + case CVMX_HELPER_INTERFACE_MODE_PICMG: + return "PICMG"; + case CVMX_HELPER_INTERFACE_MODE_NPI: + return "NPI"; + case CVMX_HELPER_INTERFACE_MODE_LOOP: + return "LOOP"; + } + return "UNKNOWN"; +} + +/** + * Setup Random Early Drop on a specific input queue + * + * @queue: Input queue to setup RED on (0-7) + * @pass_thresh: + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. + * @drop_thresh: + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. + * Returns Zero on success. Negative on failure + */ +static int cvmx_helper_setup_red_queue(int queue, int pass_thresh, + int drop_thresh) +{ + union cvmx_ipd_qosx_red_marks red_marks; + union cvmx_ipd_red_quex_param red_param; + + /* Set RED to begin dropping packets when there are pass_thresh buffers + left. It will linearly drop more packets until reaching drop_thresh + buffers */ + red_marks.u64 = 0; + red_marks.s.drop = drop_thresh; + red_marks.s.pass = pass_thresh; + cvmx_write_csr(CVMX_IPD_QOSX_RED_MARKS(queue), red_marks.u64); + + /* Use the actual queue 0 counter, not the average */ + red_param.u64 = 0; + red_param.s.prb_con = + (255ul << 24) / (red_marks.s.pass - red_marks.s.drop); + red_param.s.avg_con = 1; + red_param.s.new_con = 255; + red_param.s.use_pcnt = 1; + cvmx_write_csr(CVMX_IPD_RED_QUEX_PARAM(queue), red_param.u64); + return 0; +} + +/** + * Setup Random Early Drop to automatically begin dropping packets. + * + * @pass_thresh: + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. + * @drop_thresh: + * All incoming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. + * Returns Zero on success. Negative on failure + */ +int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) +{ + union cvmx_ipd_portx_bp_page_cnt page_cnt; + union cvmx_ipd_bp_prt_red_end ipd_bp_prt_red_end; + union cvmx_ipd_red_port_enable red_port_enable; + int queue; + int interface; + int port; + + /* Disable backpressure based on queued buffers. It needs SW support */ + page_cnt.u64 = 0; + page_cnt.s.bp_enb = 0; + page_cnt.s.page_cnt = 100; + for (interface = 0; interface < 2; interface++) { + for (port = cvmx_helper_get_first_ipd_port(interface); + port < cvmx_helper_get_last_ipd_port(interface); port++) + cvmx_write_csr(CVMX_IPD_PORTX_BP_PAGE_CNT(port), + page_cnt.u64); + } + + for (queue = 0; queue < 8; queue++) + cvmx_helper_setup_red_queue(queue, pass_thresh, drop_thresh); + + /* Shutoff the dropping based on the per port page count. SW isn't + decrementing it right now */ + ipd_bp_prt_red_end.u64 = 0; + ipd_bp_prt_red_end.s.prt_enb = 0; + cvmx_write_csr(CVMX_IPD_BP_PRT_RED_END, ipd_bp_prt_red_end.u64); + + red_port_enable.u64 = 0; + red_port_enable.s.prt_enb = 0xfffffffffull; + red_port_enable.s.avg_dly = 10000; + red_port_enable.s.prb_dly = 10000; + cvmx_write_csr(CVMX_IPD_RED_PORT_ENABLE, red_port_enable.u64); + + return 0; +} +EXPORT_SYMBOL_GPL(cvmx_helper_setup_red); + +/** + * Setup the common GMX settings that determine the number of + * ports. These setting apply to almost all configurations of all + * chips. + * + * @interface: Interface to configure + * @num_ports: Number of ports on the interface + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_setup_gmx(int interface, int num_ports) +{ + union cvmx_gmxx_tx_prts gmx_tx_prts; + union cvmx_gmxx_rx_prts gmx_rx_prts; + union cvmx_pko_reg_gmx_port_mode pko_mode; + union cvmx_gmxx_txx_thresh gmx_tx_thresh; + int index; + + /* Tell GMX the number of TX ports on this interface */ + gmx_tx_prts.u64 = cvmx_read_csr(CVMX_GMXX_TX_PRTS(interface)); + gmx_tx_prts.s.prts = num_ports; + cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), gmx_tx_prts.u64); + + /* Tell GMX the number of RX ports on this interface. This only + ** applies to *GMII and XAUI ports */ + if (cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_RGMII + || cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_SGMII + || cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_GMII + || cvmx_helper_interface_get_mode(interface) == + CVMX_HELPER_INTERFACE_MODE_XAUI) { + if (num_ports > 4) { + cvmx_dprintf("__cvmx_helper_setup_gmx: Illegal " + "num_ports\n"); + return -1; + } + + gmx_rx_prts.u64 = cvmx_read_csr(CVMX_GMXX_RX_PRTS(interface)); + gmx_rx_prts.s.prts = num_ports; + cvmx_write_csr(CVMX_GMXX_RX_PRTS(interface), gmx_rx_prts.u64); + } + + /* Skip setting CVMX_PKO_REG_GMX_PORT_MODE on 30XX, 31XX, and 50XX */ + if (!OCTEON_IS_MODEL(OCTEON_CN30XX) && !OCTEON_IS_MODEL(OCTEON_CN31XX) + && !OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* Tell PKO the number of ports on this interface */ + pko_mode.u64 = cvmx_read_csr(CVMX_PKO_REG_GMX_PORT_MODE); + if (interface == 0) { + if (num_ports == 1) + pko_mode.s.mode0 = 4; + else if (num_ports == 2) + pko_mode.s.mode0 = 3; + else if (num_ports <= 4) + pko_mode.s.mode0 = 2; + else if (num_ports <= 8) + pko_mode.s.mode0 = 1; + else + pko_mode.s.mode0 = 0; + } else { + if (num_ports == 1) + pko_mode.s.mode1 = 4; + else if (num_ports == 2) + pko_mode.s.mode1 = 3; + else if (num_ports <= 4) + pko_mode.s.mode1 = 2; + else if (num_ports <= 8) + pko_mode.s.mode1 = 1; + else + pko_mode.s.mode1 = 0; + } + cvmx_write_csr(CVMX_PKO_REG_GMX_PORT_MODE, pko_mode.u64); + } + + /* + * Set GMX to buffer as much data as possible before starting + * transmit. This reduces the chances that we have a TX under + * run due to memory contention. Any packet that fits entirely + * in the GMX FIFO can never have an under run regardless of + * memory load. + */ + gmx_tx_thresh.u64 = cvmx_read_csr(CVMX_GMXX_TXX_THRESH(0, interface)); + if (OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN31XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* These chips have a fixed max threshold of 0x40 */ + gmx_tx_thresh.s.cnt = 0x40; + } else { + /* Choose the max value for the number of ports */ + if (num_ports <= 1) + gmx_tx_thresh.s.cnt = 0x100 / 1; + else if (num_ports == 2) + gmx_tx_thresh.s.cnt = 0x100 / 2; + else + gmx_tx_thresh.s.cnt = 0x100 / 4; + } + /* + * SPI and XAUI can have lots of ports but the GMX hardware + * only ever has a max of 4. + */ + if (num_ports > 4) + num_ports = 4; + for (index = 0; index < num_ports; index++) + cvmx_write_csr(CVMX_GMXX_TXX_THRESH(index, interface), + gmx_tx_thresh.u64); + + return 0; +} + +/** + * Returns the IPD/PKO port number for a port on the given + * interface. + * + * @interface: Interface to use + * @port: Port on the interface + * + * Returns IPD/PKO port number + */ +int cvmx_helper_get_ipd_port(int interface, int port) +{ + switch (interface) { + case 0: + return port; + case 1: + return port + 16; + case 2: + return port + 32; + case 3: + return port + 36; + case 4: + return port + 40; + case 5: + return port + 44; + } + return -1; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_ipd_port); + +/** + * Returns the interface number for an IPD/PKO port number. + * + * @ipd_port: IPD/PKO port number + * + * Returns Interface number + */ +int cvmx_helper_get_interface_num(int ipd_port) +{ + if (ipd_port < 16) + return 0; + else if (ipd_port < 32) + return 1; + else if (ipd_port < 36) + return 2; + else if (ipd_port < 40) + return 3; + else if (ipd_port < 44) + return 4; + else if (ipd_port < 48) + return 5; + else + cvmx_dprintf("cvmx_helper_get_interface_num: Illegal IPD " + "port number\n"); + + return -1; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_num); + +/** + * Returns the interface index number for an IPD/PKO port + * number. + * + * @ipd_port: IPD/PKO port number + * + * Returns Interface index number + */ +int cvmx_helper_get_interface_index_num(int ipd_port) +{ + if (ipd_port < 32) + return ipd_port & 15; + else if (ipd_port < 36) + return ipd_port & 3; + else if (ipd_port < 40) + return ipd_port & 3; + else if (ipd_port < 44) + return ipd_port & 3; + else if (ipd_port < 48) + return ipd_port & 3; + else + cvmx_dprintf("cvmx_helper_get_interface_index_num: " + "Illegal IPD port number\n"); + + return -1; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_index_num); diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c new file mode 100644 index 000000000..842990e84 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -0,0 +1,321 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (C) 2003-2018 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Functions for XAUI initialization, configuration, + * and monitoring. + * + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-helper.h> + +#include <asm/octeon/cvmx-pko-defs.h> +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> + +int __cvmx_helper_xaui_enumerate(int interface) +{ + union cvmx_gmxx_hg2_control gmx_hg2_control; + + /* If HiGig2 is enabled return 16 ports, otherwise return 1 port */ + gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface)); + if (gmx_hg2_control.s.hg2tx_en) + return 16; + else + return 1; +} + +/** + * Probe a XAUI interface and determine the number of ports + * connected to it. The XAUI interface should still be down + * after this call. + * + * @interface: Interface to probe + * + * Returns Number of ports on the interface. Zero to disable. + */ +int __cvmx_helper_xaui_probe(int interface) +{ + int i; + union cvmx_gmxx_inf_mode mode; + + /* + * Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the + * interface needs to be enabled before IPD otherwise per port + * backpressure may not work properly. + */ + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + mode.s.en = 1; + cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64); + + __cvmx_helper_setup_gmx(interface, 1); + + /* + * Setup PKO to support 16 ports for HiGig2 virtual + * ports. We're pointing all of the PKO packet ports for this + * interface to the XAUI. This allows us to use HiGig2 + * backpressure per port. + */ + for (i = 0; i < 16; i++) { + union cvmx_pko_mem_port_ptrs pko_mem_port_ptrs; + pko_mem_port_ptrs.u64 = 0; + /* + * We set each PKO port to have equal priority in a + * round robin fashion. + */ + pko_mem_port_ptrs.s.static_p = 0; + pko_mem_port_ptrs.s.qos_mask = 0xff; + /* All PKO ports map to the same XAUI hardware port */ + pko_mem_port_ptrs.s.eid = interface * 4; + pko_mem_port_ptrs.s.pid = interface * 16 + i; + cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64); + } + return __cvmx_helper_xaui_enumerate(interface); +} + +/** + * Bringup and enable a XAUI interface. After this call packet + * I/O should be fully functional. This is called with IPD + * enabled but PKO disabled. + * + * @interface: Interface to bring up + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_xaui_enable(int interface) +{ + union cvmx_gmxx_prtx_cfg gmx_cfg; + union cvmx_pcsxx_control1_reg xauiCtl; + union cvmx_pcsxx_misc_ctl_reg xauiMiscCtl; + union cvmx_gmxx_tx_xaui_ctl gmxXauiTxCtl; + union cvmx_gmxx_rxx_int_en gmx_rx_int_en; + union cvmx_gmxx_tx_int_en gmx_tx_int_en; + union cvmx_pcsxx_int_en_reg pcsx_int_en_reg; + + /* Setup PKND */ + if (octeon_has_feature(OCTEON_FEATURE_PKND)) { + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.pknd = cvmx_helper_get_ipd_port(interface, 0); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + } + + /* (1) Interface has already been enabled. */ + + /* (2) Disable GMX. */ + xauiMiscCtl.u64 = cvmx_read_csr(CVMX_PCSXX_MISC_CTL_REG(interface)); + xauiMiscCtl.s.gmxeno = 1; + cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); + + /* (3) Disable GMX and PCSX interrupts. */ + gmx_rx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_EN(0, interface)); + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); + gmx_tx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_TX_INT_EN(interface)); + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0); + pcsx_int_en_reg.u64 = cvmx_read_csr(CVMX_PCSXX_INT_EN_REG(interface)); + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); + + /* (4) Bring up the PCSX and GMX reconciliation layer. */ + /* (4)a Set polarity and lane swapping. */ + /* (4)b */ + gmxXauiTxCtl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); + /* Enable better IFG packing and improves performance */ + gmxXauiTxCtl.s.dic_en = 1; + gmxXauiTxCtl.s.uni_en = 0; + cvmx_write_csr(CVMX_GMXX_TX_XAUI_CTL(interface), gmxXauiTxCtl.u64); + + /* (4)c Aply reset sequence */ + xauiCtl.u64 = cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface)); + xauiCtl.s.lo_pwr = 0; + + /* Issuing a reset here seems to hang some CN68XX chips. */ + if (!OCTEON_IS_MODEL(OCTEON_CN68XX_PASS1_X) && + !OCTEON_IS_MODEL(OCTEON_CN68XX_PASS2_X)) + xauiCtl.s.reset = 1; + + cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface), xauiCtl.u64); + + /* Wait for PCS to come out of reset */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_CONTROL1_REG(interface), union cvmx_pcsxx_control1_reg, + reset, ==, 0, 10000)) + return -1; + /* Wait for PCS to be aligned */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_10GBX_STATUS_REG(interface), + union cvmx_pcsxx_10gbx_status_reg, alignd, ==, 1, 10000)) + return -1; + /* Wait for RX to be ready */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_RX_XAUI_CTL(interface), union cvmx_gmxx_rx_xaui_ctl, + status, ==, 0, 10000)) + return -1; + + /* (6) Configure GMX */ + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.en = 0; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + /* Wait for GMX RX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg, + rx_idle, ==, 1, 10000)) + return -1; + /* Wait for GMX TX to be idle */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg, + tx_idle, ==, 1, 10000)) + return -1; + + /* GMX configure */ + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.speed = 1; + gmx_cfg.s.speed_msb = 0; + gmx_cfg.s.slottime = 1; + cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), 1); + cvmx_write_csr(CVMX_GMXX_TXX_SLOT(0, interface), 512); + cvmx_write_csr(CVMX_GMXX_TXX_BURST(0, interface), 8192); + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + /* (7) Clear out any error state */ + cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(0, interface), + cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(0, interface))); + cvmx_write_csr(CVMX_GMXX_TX_INT_REG(interface), + cvmx_read_csr(CVMX_GMXX_TX_INT_REG(interface))); + cvmx_write_csr(CVMX_PCSXX_INT_REG(interface), + cvmx_read_csr(CVMX_PCSXX_INT_REG(interface))); + + /* Wait for receive link */ + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_STATUS1_REG(interface), union cvmx_pcsxx_status1_reg, + rcv_lnk, ==, 1, 10000)) + return -1; + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg, + xmtflt, ==, 0, 10000)) + return -1; + if (CVMX_WAIT_FOR_FIELD64 + (CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg, + rcvflt, ==, 0, 10000)) + return -1; + + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), gmx_rx_int_en.u64); + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64); + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64); + + /* (8) Enable packet reception */ + xauiMiscCtl.s.gmxeno = 0; + cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64); + + gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface)); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64); + + __cvmx_interrupt_pcsx_intx_en_reg_enable(0, interface); + __cvmx_interrupt_pcsx_intx_en_reg_enable(1, interface); + __cvmx_interrupt_pcsx_intx_en_reg_enable(2, interface); + __cvmx_interrupt_pcsx_intx_en_reg_enable(3, interface); + __cvmx_interrupt_pcsxx_int_en_reg_enable(interface); + __cvmx_interrupt_gmxx_enable(interface); + + return 0; +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +union cvmx_helper_link_info __cvmx_helper_xaui_link_get(int ipd_port) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; + union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; + union cvmx_pcsxx_status1_reg pcsxx_status1_reg; + union cvmx_helper_link_info result; + + gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); + gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface)); + pcsxx_status1_reg.u64 = + cvmx_read_csr(CVMX_PCSXX_STATUS1_REG(interface)); + result.u64 = 0; + + /* Only return a link if both RX and TX are happy */ + if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0) && + (pcsxx_status1_reg.s.rcv_lnk == 1)) { + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10000; + } else { + /* Disable GMX and PCSX interrupts. */ + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0); + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0); + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0); + } + return result; +} + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_xaui_link_set(int ipd_port, union cvmx_helper_link_info link_info) +{ + int interface = cvmx_helper_get_interface_num(ipd_port); + union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl; + union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl; + + gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface)); + gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface)); + + /* If the link shouldn't be up, then just return */ + if (!link_info.s.link_up) + return 0; + + /* Do nothing if both RX and TX are happy */ + if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0)) + return 0; + + /* Bring the link up */ + return __cvmx_helper_xaui_enable(interface); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c new file mode 100644 index 000000000..a18ad2daf --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -0,0 +1,1176 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Helper functions for common, but complicated tasks. + * + */ +#include <linux/bug.h> +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-fpa.h> +#include <asm/octeon/cvmx-pip.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-ipd.h> +#include <asm/octeon/cvmx-spi.h> +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-pip-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> + +/* Port count per interface */ +static int interface_port_count[9]; + +/** + * Return the number of interfaces the chip has. Each interface + * may have multiple ports. Most chips support two interfaces, + * but the CNX0XX and CNX1XX are exceptions. These only support + * one interface. + * + * Returns Number of interfaces on chip + */ +int cvmx_helper_get_number_of_interfaces(void) +{ + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + return 9; + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) + return 4; + if (OCTEON_IS_MODEL(OCTEON_CN7XXX)) + return 5; + else + return 3; +} +EXPORT_SYMBOL_GPL(cvmx_helper_get_number_of_interfaces); + +/** + * Return the number of ports on an interface. Depending on the + * chip and configuration, this can be 1-16. A value of 0 + * specifies that the interface doesn't exist or isn't usable. + * + * @interface: Interface to get the port count for + * + * Returns Number of ports on interface. Can be Zero. + */ +int cvmx_helper_ports_on_interface(int interface) +{ + return interface_port_count[interface]; +} +EXPORT_SYMBOL_GPL(cvmx_helper_ports_on_interface); + +/** + * @INTERNAL + * Return interface mode for CN68xx. + */ +static cvmx_helper_interface_mode_t __cvmx_get_mode_cn68xx(int interface) +{ + union cvmx_mio_qlmx_cfg qlm_cfg; + switch (interface) { + case 0: + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0)); + /* QLM is disabled when QLM SPD is 15. */ + if (qlm_cfg.s.qlm_spd == 15) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 2: + case 3: + case 4: + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(interface)); + /* QLM is disabled when QLM SPD is 15. */ + if (qlm_cfg.s.qlm_spd == 15) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 7: + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(3)); + /* QLM is disabled when QLM SPD is 15. */ + if (qlm_cfg.s.qlm_spd == 15) { + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } else if (qlm_cfg.s.qlm_cfg != 0) { + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1)); + if (qlm_cfg.s.qlm_cfg != 0) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + return CVMX_HELPER_INTERFACE_MODE_NPI; + case 8: + return CVMX_HELPER_INTERFACE_MODE_LOOP; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } +} + +/** + * @INTERNAL + * Return interface mode for an Octeon II + */ +static cvmx_helper_interface_mode_t __cvmx_get_mode_octeon2(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + return __cvmx_get_mode_cn68xx(interface); + + if (interface == 2) + return CVMX_HELPER_INTERFACE_MODE_NPI; + + if (interface == 3) + return CVMX_HELPER_INTERFACE_MODE_LOOP; + + /* Only present in CN63XX & CN66XX Octeon model */ + if ((OCTEON_IS_MODEL(OCTEON_CN63XX) && + (interface == 4 || interface == 5)) || + (OCTEON_IS_MODEL(OCTEON_CN66XX) && + interface >= 4 && interface <= 7)) { + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + if (OCTEON_IS_MODEL(OCTEON_CN66XX)) { + union cvmx_mio_qlmx_cfg mio_qlm_cfg; + + /* QLM2 is SGMII0 and QLM1 is SGMII1 */ + if (interface == 0) + mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2)); + else if (interface == 1) + mio_qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(1)); + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mio_qlm_cfg.s.qlm_spd == 15) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mio_qlm_cfg.s.qlm_cfg == 9) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (mio_qlm_cfg.s.qlm_cfg == 11) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } else if (OCTEON_IS_MODEL(OCTEON_CN61XX)) { + union cvmx_mio_qlmx_cfg qlm_cfg; + + if (interface == 0) { + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(2)); + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } else if (interface == 1) { + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0)); + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + else if (qlm_cfg.s.qlm_cfg == 3) + return CVMX_HELPER_INTERFACE_MODE_XAUI; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else if (OCTEON_IS_MODEL(OCTEON_CNF71XX)) { + if (interface == 0) { + union cvmx_mio_qlmx_cfg qlm_cfg; + qlm_cfg.u64 = cvmx_read_csr(CVMX_MIO_QLMX_CFG(0)); + if (qlm_cfg.s.qlm_cfg == 2) + return CVMX_HELPER_INTERFACE_MODE_SGMII; + } + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + if (interface == 1 && OCTEON_IS_MODEL(OCTEON_CN63XX)) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + switch (mode.cn61xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 1: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else { + if (!mode.s.en) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mode.s.type) + return CVMX_HELPER_INTERFACE_MODE_GMII; + else + return CVMX_HELPER_INTERFACE_MODE_RGMII; + } +} + +/** + * @INTERNAL + * Return interface mode for CN7XXX. + */ +static cvmx_helper_interface_mode_t __cvmx_get_mode_cn7xxx(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + switch (interface) { + case 0: + case 1: + switch (mode.cn68xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 1: + case 2: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 3: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + default: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + } + case 2: + return CVMX_HELPER_INTERFACE_MODE_NPI; + case 3: + return CVMX_HELPER_INTERFACE_MODE_LOOP; + case 4: + /* TODO: Implement support for AGL (RGMII). */ + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } +} + +/** + * Get the operating mode of an interface. Depending on the Octeon + * chip and configuration, this function returns an enumeration + * of the type of packet I/O supported by an interface. + * + * @interface: Interface to probe + * + * Returns Mode of the interface. Unknown or unsupported interfaces return + * DISABLED. + */ +cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) +{ + union cvmx_gmxx_inf_mode mode; + + if (interface < 0 || + interface >= cvmx_helper_get_number_of_interfaces()) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + /* + * OCTEON III models + */ + if (OCTEON_IS_MODEL(OCTEON_CN7XXX)) + return __cvmx_get_mode_cn7xxx(interface); + + /* + * Octeon II models + */ + if (OCTEON_IS_MODEL(OCTEON_CN6XXX) || OCTEON_IS_MODEL(OCTEON_CNF71XX)) + return __cvmx_get_mode_octeon2(interface); + + /* + * Octeon and Octeon Plus models + */ + if (interface == 2) + return CVMX_HELPER_INTERFACE_MODE_NPI; + + if (interface == 3) { + if (OCTEON_IS_MODEL(OCTEON_CN56XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX)) + return CVMX_HELPER_INTERFACE_MODE_LOOP; + else + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + + /* Interface 1 is always disabled on CN31XX and CN30XX */ + if ((interface == 1) + && (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN30XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX))) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + switch (mode.cn52xx.mode) { + case 0: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + case 1: + return CVMX_HELPER_INTERFACE_MODE_XAUI; + case 2: + return CVMX_HELPER_INTERFACE_MODE_SGMII; + case 3: + return CVMX_HELPER_INTERFACE_MODE_PICMG; + default: + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + } + } else { + if (!mode.s.en) + return CVMX_HELPER_INTERFACE_MODE_DISABLED; + + if (mode.s.type) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) + return CVMX_HELPER_INTERFACE_MODE_SPI; + else + return CVMX_HELPER_INTERFACE_MODE_GMII; + } else + return CVMX_HELPER_INTERFACE_MODE_RGMII; + } +} +EXPORT_SYMBOL_GPL(cvmx_helper_interface_get_mode); + +/** + * Configure the IPD/PIP tagging and QoS options for a specific + * port. This function determines the POW work queue entry + * contents for a port. The setup performed here is controlled by + * the defines in executive-config.h. + * + * @ipd_port: Port to configure. This follows the IPD numbering, not the + * per interface numbering + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_port_setup_ipd(int ipd_port) +{ + union cvmx_pip_prt_cfgx port_config; + union cvmx_pip_prt_tagx tag_config; + + port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port)); + tag_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_TAGX(ipd_port)); + + /* Have each port go to a different POW queue */ + port_config.s.qos = ipd_port & 0x7; + + /* Process the headers and place the IP header in the work queue */ + port_config.s.mode = CVMX_HELPER_INPUT_PORT_SKIP_MODE; + + tag_config.s.ip6_src_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_IP; + tag_config.s.ip6_dst_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_IP; + tag_config.s.ip6_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_SRC_PORT; + tag_config.s.ip6_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV6_DST_PORT; + tag_config.s.ip6_nxth_flag = CVMX_HELPER_INPUT_TAG_IPV6_NEXT_HEADER; + tag_config.s.ip4_src_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_IP; + tag_config.s.ip4_dst_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_IP; + tag_config.s.ip4_sprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_SRC_PORT; + tag_config.s.ip4_dprt_flag = CVMX_HELPER_INPUT_TAG_IPV4_DST_PORT; + tag_config.s.ip4_pctl_flag = CVMX_HELPER_INPUT_TAG_IPV4_PROTOCOL; + tag_config.s.inc_prt_flag = CVMX_HELPER_INPUT_TAG_INPUT_PORT; + tag_config.s.tcp6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.tcp4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.ip6_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.ip4_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + tag_config.s.non_tag_type = CVMX_HELPER_INPUT_TAG_TYPE; + /* Put all packets in group 0. Other groups can be used by the app */ + tag_config.s.grp = 0; + + cvmx_pip_config_port(ipd_port, port_config, tag_config); + + return 0; +} + +/** + * This function sets the interface_port_count[interface] correctly, + * without modifying any hardware configuration. Hardware setup of + * the ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_enumerate(int interface) +{ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + interface_port_count[interface] = 0; + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + interface_port_count[interface] = + __cvmx_helper_xaui_enumerate(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + interface_port_count[interface] = + __cvmx_helper_rgmii_enumerate(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + interface_port_count[interface] = + __cvmx_helper_spi_enumerate(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + interface_port_count[interface] = + __cvmx_helper_sgmii_enumerate(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + interface_port_count[interface] = + __cvmx_helper_npi_enumerate(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + interface_port_count[interface] = + __cvmx_helper_loop_enumerate(interface); + break; + } + + interface_port_count[interface] = + __cvmx_helper_board_interface_probe(interface, + interface_port_count + [interface]); + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + +/** + * This function probes an interface to determine the actual + * number of hardware ports connected to it. It doesn't setup the + * ports or enable them. The main goal here is to set the global + * interface_port_count[interface] correctly. Hardware setup of the + * ports will be performed later. + * + * @interface: Interface to probe + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_interface_probe(int interface) +{ + cvmx_helper_interface_enumerate(interface); + /* At this stage in the game we don't want packets to be moving yet. + The following probe calls should perform hardware setup + needed to determine port counts. Receive must still be disabled */ + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + __cvmx_helper_xaui_probe(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + __cvmx_helper_rgmii_probe(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end. + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + __cvmx_helper_spi_probe(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up. + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + __cvmx_helper_sgmii_probe(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + __cvmx_helper_npi_probe(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode. + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + __cvmx_helper_loop_probe(interface); + break; + } + + /* Make sure all global variables propagate to other cores */ + CVMX_SYNCWS; + + return 0; +} + +/** + * Setup the IPD/PIP for the ports on an interface. Packet + * classification and tagging are set for every port on the + * interface. The number of ports on the interface must already + * have been probed. + * + * @interface: Interface to setup IPD/PIP for + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_interface_setup_ipd(int interface) +{ + int ipd_port = cvmx_helper_get_ipd_port(interface, 0); + int num_ports = interface_port_count[interface]; + + while (num_ports--) { + __cvmx_helper_port_setup_ipd(ipd_port); + ipd_port++; + } + return 0; +} + +/** + * Setup global setting for IPD/PIP not related to a specific + * interface or port. This must be called before IPD is enabled. + * + * Returns Zero on success, negative on failure. + */ +static int __cvmx_helper_global_setup_ipd(void) +{ + /* Setup the global packet input options */ + cvmx_ipd_config(CVMX_FPA_PACKET_POOL_SIZE / 8, + CVMX_HELPER_FIRST_MBUFF_SKIP / 8, + CVMX_HELPER_NOT_FIRST_MBUFF_SKIP / 8, + /* The +8 is to account for the next ptr */ + (CVMX_HELPER_FIRST_MBUFF_SKIP + 8) / 128, + /* The +8 is to account for the next ptr */ + (CVMX_HELPER_NOT_FIRST_MBUFF_SKIP + 8) / 128, + CVMX_FPA_WQE_POOL, + CVMX_IPD_OPC_MODE_STT, + CVMX_HELPER_ENABLE_BACK_PRESSURE); + return 0; +} + +/** + * Setup the PKO for the ports on an interface. The number of + * queues per port and the priority of each PKO output queue + * is set here. PKO must be disabled when this function is called. + * + * @interface: Interface to setup PKO for + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_interface_setup_pko(int interface) +{ + /* + * Each packet output queue has an associated priority. The + * higher the priority, the more often it can send a packet. A + * priority of 8 means it can send in all 8 rounds of + * contention. We're going to make each queue one less than + * the last. The vector of priorities has been extended to + * support CN5xxx CPUs, where up to 16 queues can be + * associated to a port. To keep backward compatibility we + * don't change the initial 8 priorities and replicate them in + * the second half. With per-core PKO queues (PKO lockless + * operation) all queues have the same priority. + */ + uint64_t priorities[16] = + { 8, 7, 6, 5, 4, 3, 2, 1, 8, 7, 6, 5, 4, 3, 2, 1 }; + + /* + * Setup the IPD/PIP and PKO for the ports discovered + * above. Here packet classification, tagging and output + * priorities are set. + */ + int ipd_port = cvmx_helper_get_ipd_port(interface, 0); + int num_ports = interface_port_count[interface]; + while (num_ports--) { + cvmx_pko_config_port(ipd_port, + cvmx_pko_get_base_queue_per_core(ipd_port, + 0), + cvmx_pko_get_num_queues(ipd_port), + priorities); + ipd_port++; + } + return 0; +} + +/** + * Setup global setting for PKO not related to a specific + * interface or port. This must be called before PKO is enabled. + * + * Returns Zero on success, negative on failure. + */ +static int __cvmx_helper_global_setup_pko(void) +{ + /* + * Disable tagwait FAU timeout. This needs to be done before + * anyone might start packet output using tags. + */ + union cvmx_iob_fau_timeout fau_to; + fau_to.u64 = 0; + fau_to.s.tout_val = 0xfff; + fau_to.s.tout_enb = 0; + cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_to.u64); + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + union cvmx_pko_reg_min_pkt min_pkt; + + min_pkt.u64 = 0; + min_pkt.s.size1 = 59; + min_pkt.s.size2 = 59; + min_pkt.s.size3 = 59; + min_pkt.s.size4 = 59; + min_pkt.s.size5 = 59; + min_pkt.s.size6 = 59; + min_pkt.s.size7 = 59; + cvmx_write_csr(CVMX_PKO_REG_MIN_PKT, min_pkt.u64); + } + + return 0; +} + +/** + * Setup global backpressure setting. + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_global_setup_backpressure(void) +{ +#if CVMX_HELPER_DISABLE_RGMII_BACKPRESSURE + /* Disable backpressure if configured to do so */ + /* Disable backpressure (pause frame) generation */ + int num_interfaces = cvmx_helper_get_number_of_interfaces(); + int interface; + for (interface = 0; interface < num_interfaces; interface++) { + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + case CVMX_HELPER_INTERFACE_MODE_XAUI: + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + case CVMX_HELPER_INTERFACE_MODE_SPI: + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + cvmx_gmx_set_backpressure_override(interface, 0xf); + break; + } + } +#endif + + return 0; +} + +/** + * Enable packet input/output from the hardware. This function is + * called after all internal setup is complete and IPD is enabled. + * After this function completes, packets will be accepted from the + * hardware ports. PKO should still be disabled to make sure packets + * aren't sent out partially setup hardware. + * + * @interface: Interface to enable + * + * Returns Zero on success, negative on failure + */ +static int __cvmx_helper_packet_hardware_enable(int interface) +{ + int result = 0; + switch (cvmx_helper_interface_get_mode(interface)) { + /* These types don't support ports to IPD/PKO */ + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + /* Nothing to do */ + break; + /* XAUI is a single high speed port */ + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_enable(interface); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = __cvmx_helper_rgmii_enable(interface); + break; + /* + * SPI4 can have 1-16 ports depending on the device at + * the other end + */ + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_enable(interface); + break; + /* + * SGMII can have 1-4 ports depending on how many are + * hooked up + */ + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_enable(interface); + break; + /* PCI target Network Packet Interface */ + case CVMX_HELPER_INTERFACE_MODE_NPI: + result = __cvmx_helper_npi_enable(interface); + break; + /* + * Special loopback only ports. These are not the same + * as other ports in loopback mode + */ + case CVMX_HELPER_INTERFACE_MODE_LOOP: + result = __cvmx_helper_loop_enable(interface); + break; + } + return result; +} + +/** + * Function to adjust internal IPD pointer alignments + * + * Returns 0 on success + * !0 on failure + */ +static int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) +{ +#define FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES \ + (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_FIRST_MBUFF_SKIP) +#define FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES \ + (CVMX_FPA_PACKET_POOL_SIZE-8-CVMX_HELPER_NOT_FIRST_MBUFF_SKIP) +#define FIX_IPD_OUTPORT 0 + /* Ports 0-15 are interface 0, 16-31 are interface 1 */ +#define INTERFACE(port) (port >> 4) +#define INDEX(port) (port & 0xf) + uint64_t *p64; + union cvmx_pko_command_word0 pko_command; + union cvmx_buf_ptr g_buffer, pkt_buffer; + struct cvmx_wqe *work; + int size, num_segs = 0, wqe_pcnt, pkt_pcnt; + union cvmx_gmxx_prtx_cfg gmx_cfg; + int retry_cnt; + int retry_loop_cnt; + int i; + + /* Save values for restore at end */ + uint64_t prtx_cfg = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + uint64_t tx_ptr_en = + cvmx_read_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); + uint64_t rx_ptr_en = + cvmx_read_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT))); + uint64_t rxx_jabber = + cvmx_read_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + uint64_t frame_max = + cvmx_read_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT))); + + /* Configure port to gig FDX as required for loopback mode */ + cvmx_helper_rgmii_internal_loopback(FIX_IPD_OUTPORT); + + /* + * Disable reception on all ports so if traffic is present it + * will not interfere. + */ + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0); + + __delay(100000000ull); + + for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) { + retry_cnt = 100000; + wqe_pcnt = cvmx_read_csr(CVMX_IPD_PTR_COUNT); + pkt_pcnt = (wqe_pcnt >> 7) & 0x7f; + wqe_pcnt &= 0x7f; + + num_segs = (2 + pkt_pcnt - wqe_pcnt) & 3; + + if (num_segs == 0) + goto fix_ipd_exit; + + num_segs += 1; + + size = + FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES + + ((num_segs - 1) * FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES) - + (FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES / 2); + + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + CVMX_SYNC; + + g_buffer.u64 = 0; + g_buffer.s.addr = + cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_WQE_POOL)); + if (g_buffer.s.addr == 0) { + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "buffer allocation failure.\n"); + goto fix_ipd_exit; + } + + g_buffer.s.pool = CVMX_FPA_WQE_POOL; + g_buffer.s.size = num_segs; + + pkt_buffer.u64 = 0; + pkt_buffer.s.addr = + cvmx_ptr_to_phys(cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL)); + if (pkt_buffer.s.addr == 0) { + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "buffer allocation failure.\n"); + goto fix_ipd_exit; + } + pkt_buffer.s.i = 1; + pkt_buffer.s.pool = CVMX_FPA_PACKET_POOL; + pkt_buffer.s.size = FIX_IPD_FIRST_BUFF_PAYLOAD_BYTES; + + p64 = (uint64_t *) cvmx_phys_to_ptr(pkt_buffer.s.addr); + p64[0] = 0xffffffffffff0000ull; + p64[1] = 0x08004510ull; + p64[2] = ((uint64_t) (size - 14) << 48) | 0x5ae740004000ull; + p64[3] = 0x3a5fc0a81073c0a8ull; + + for (i = 0; i < num_segs; i++) { + if (i > 0) + pkt_buffer.s.size = + FIX_IPD_NON_FIRST_BUFF_PAYLOAD_BYTES; + + if (i == (num_segs - 1)) + pkt_buffer.s.i = 0; + + *(uint64_t *) cvmx_phys_to_ptr(g_buffer.s.addr + + 8 * i) = pkt_buffer.u64; + } + + /* Build the PKO command */ + pko_command.u64 = 0; + pko_command.s.segs = num_segs; + pko_command.s.total_bytes = size; + pko_command.s.dontfree = 0; + pko_command.s.gather = 1; + + gmx_cfg.u64 = + cvmx_read_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT))); + gmx_cfg.s.en = 1; + cvmx_write_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), gmx_cfg.u64); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + 1 << INDEX(FIX_IPD_OUTPORT)); + + cvmx_write_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), + INTERFACE(FIX_IPD_OUTPORT)), 65392 - 14 - 4); + + cvmx_pko_send_packet_prepare(FIX_IPD_OUTPORT, + cvmx_pko_get_base_queue + (FIX_IPD_OUTPORT), + CVMX_PKO_LOCK_CMD_QUEUE); + cvmx_pko_send_packet_finish(FIX_IPD_OUTPORT, + cvmx_pko_get_base_queue + (FIX_IPD_OUTPORT), pko_command, + g_buffer, CVMX_PKO_LOCK_CMD_QUEUE); + + CVMX_SYNC; + + do { + work = cvmx_pow_work_request_sync(CVMX_POW_WAIT); + retry_cnt--; + } while ((work == NULL) && (retry_cnt > 0)); + + if (!retry_cnt) + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT " + "get_work() timeout occurred.\n"); + + /* Free packet */ + if (work) + cvmx_helper_free_packet_data(work); + } + +fix_ipd_exit: + + /* Return CSR configs to saved values */ + cvmx_write_csr(CVMX_GMXX_PRTX_CFG + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + prtx_cfg); + cvmx_write_csr(CVMX_ASXX_TX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + tx_ptr_en); + cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), + rx_ptr_en); + cvmx_write_csr(CVMX_GMXX_RXX_JABBER + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + rxx_jabber); + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX + (INDEX(FIX_IPD_OUTPORT), INTERFACE(FIX_IPD_OUTPORT)), + frame_max); + cvmx_write_csr(CVMX_ASXX_PRT_LOOP(INTERFACE(FIX_IPD_OUTPORT)), 0); + + CVMX_SYNC; + if (num_segs) + cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT failed.\n"); + + return !!num_segs; + +} + +/** + * Called after all internal packet IO paths are setup. This + * function enables IPD/PIP and begins packet input and output. + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_ipd_and_packet_input_enable(void) +{ + int num_interfaces; + int interface; + + /* Enable IPD */ + cvmx_ipd_enable(); + + /* + * Time to enable hardware ports packet input and output. Note + * that at this point IPD/PIP must be fully functional and PKO + * must be disabled + */ + num_interfaces = cvmx_helper_get_number_of_interfaces(); + for (interface = 0; interface < num_interfaces; interface++) { + if (cvmx_helper_ports_on_interface(interface) > 0) + __cvmx_helper_packet_hardware_enable(interface); + } + + /* Finally enable PKO now that the entire path is up and running */ + cvmx_pko_enable(); + + if ((OCTEON_IS_MODEL(OCTEON_CN31XX_PASS1) + || OCTEON_IS_MODEL(OCTEON_CN30XX_PASS1)) + && (cvmx_sysinfo_get()->board_type != CVMX_BOARD_TYPE_SIM)) + __cvmx_helper_errata_fix_ipd_ptr_alignment(); + return 0; +} +EXPORT_SYMBOL_GPL(cvmx_helper_ipd_and_packet_input_enable); + +/** + * Initialize the PIP, IPD, and PKO hardware to support + * simple priority based queues for the ethernet ports. Each + * port is configured with a number of priority queues based + * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower + * priority than the previous. + * + * Returns Zero on success, non-zero on failure + */ +int cvmx_helper_initialize_packet_io_global(void) +{ + int result = 0; + int interface; + union cvmx_l2c_cfg l2c_cfg; + const int num_interfaces = cvmx_helper_get_number_of_interfaces(); + + /* + * CN52XX pass 1: Due to a bug in 2nd order CDR, it needs to + * be disabled. + */ + if (OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_0)) + __cvmx_helper_errata_qlm_disable_2nd_order_cdr(1); + + /* + * Tell L2 to give the IOB statically higher priority compared + * to the cores. This avoids conditions where IO blocks might + * be starved under very high L2 loads. + */ + l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG); + l2c_cfg.s.lrf_arb_mode = 0; + l2c_cfg.s.rfb_arb_mode = 0; + cvmx_write_csr(CVMX_L2C_CFG, l2c_cfg.u64); + + cvmx_pko_initialize_global(); + for (interface = 0; interface < num_interfaces; interface++) { + result |= cvmx_helper_interface_probe(interface); + if (cvmx_helper_ports_on_interface(interface) > 0) + cvmx_dprintf("Interface %d has %d ports (%s)\n", + interface, + cvmx_helper_ports_on_interface(interface), + cvmx_helper_interface_mode_to_string + (cvmx_helper_interface_get_mode + (interface))); + result |= __cvmx_helper_interface_setup_ipd(interface); + result |= __cvmx_helper_interface_setup_pko(interface); + } + + result |= __cvmx_helper_global_setup_ipd(); + result |= __cvmx_helper_global_setup_pko(); + + /* Enable any flow control and backpressure */ + result |= __cvmx_helper_global_setup_backpressure(); + +#if CVMX_HELPER_ENABLE_IPD + result |= cvmx_helper_ipd_and_packet_input_enable(); +#endif + return result; +} +EXPORT_SYMBOL_GPL(cvmx_helper_initialize_packet_io_global); + +/** + * Does core local initialization for packet io + * + * Returns Zero on success, non-zero on failure + */ +int cvmx_helper_initialize_packet_io_local(void) +{ + return cvmx_pko_initialize_local(); +} + +/** + * Return the link state of an IPD/PKO port as returned by + * auto negotiation. The result of this function may not match + * Octeon's link config if auto negotiation has changed since + * the last call to cvmx_helper_link_set(). + * + * @ipd_port: IPD/PKO port to query + * + * Returns Link state + */ +union cvmx_helper_link_info cvmx_helper_link_get(int ipd_port) +{ + union cvmx_helper_link_info result; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + /* The default result will be a down link unless the code below + changes it */ + result.u64 = 0; + + if (index >= cvmx_helper_ports_on_interface(interface)) + return result; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + /* Network links are not supported */ + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_GMII: + if (index == 0) + result = __cvmx_helper_rgmii_link_get(ipd_port); + else { + WARN_ONCE(1, "Using deprecated link status - please update your DT"); + result.s.full_duplex = 1; + result.s.link_up = 1; + result.s.speed = 1000; + } + break; + case CVMX_HELPER_INTERFACE_MODE_RGMII: + result = __cvmx_helper_rgmii_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_link_get(ipd_port); + break; + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + /* Network links are not supported */ + break; + } + return result; +} +EXPORT_SYMBOL_GPL(cvmx_helper_link_get); + +/** + * Configure an IPD/PKO port for the specified link state. This + * function does not influence auto negotiation at the PHY level. + * The passed link state must always match the link state returned + * by cvmx_helper_link_get(). + * + * @ipd_port: IPD/PKO port to configure + * @link_info: The new link state + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_link_set(int ipd_port, union cvmx_helper_link_info link_info) +{ + int result = -1; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + + if (index >= cvmx_helper_ports_on_interface(interface)) + return -1; + + switch (cvmx_helper_interface_get_mode(interface)) { + case CVMX_HELPER_INTERFACE_MODE_DISABLED: + case CVMX_HELPER_INTERFACE_MODE_PCIE: + break; + case CVMX_HELPER_INTERFACE_MODE_XAUI: + result = __cvmx_helper_xaui_link_set(ipd_port, link_info); + break; + /* + * RGMII/GMII/MII are all treated about the same. Most + * functions refer to these ports as RGMII. + */ + case CVMX_HELPER_INTERFACE_MODE_RGMII: + case CVMX_HELPER_INTERFACE_MODE_GMII: + result = __cvmx_helper_rgmii_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_SPI: + result = __cvmx_helper_spi_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_SGMII: + case CVMX_HELPER_INTERFACE_MODE_PICMG: + result = __cvmx_helper_sgmii_link_set(ipd_port, link_info); + break; + case CVMX_HELPER_INTERFACE_MODE_NPI: + case CVMX_HELPER_INTERFACE_MODE_LOOP: + break; + } + return result; +} +EXPORT_SYMBOL_GPL(cvmx_helper_link_set); diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c new file mode 100644 index 000000000..2f415d9d0 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c @@ -0,0 +1,371 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2009 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Automatically generated functions useful for enabling + * and decoding RSL_INT_BLOCKS interrupts. + * + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-pcsx-defs.h> +#include <asm/octeon/cvmx-pcsxx-defs.h> +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> + +#ifndef PRINT_ERROR +#define PRINT_ERROR(format, ...) +#endif + + +/** + * __cvmx_interrupt_gmxx_rxx_int_en_enable enables all interrupt bits in cvmx_gmxx_rxx_int_en_t + */ +void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block) +{ + union cvmx_gmxx_rxx_int_en gmx_rx_int_en; + cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, block), + cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(index, block))); + gmx_rx_int_en.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) { + /* Skipping gmx_rx_int_en.s.reserved_29_63 */ + gmx_rx_int_en.s.hg2cc = 1; + gmx_rx_int_en.s.hg2fld = 1; + gmx_rx_int_en.s.undat = 1; + gmx_rx_int_en.s.uneop = 1; + gmx_rx_int_en.s.unsop = 1; + gmx_rx_int_en.s.bad_term = 1; + gmx_rx_int_en.s.bad_seq = 1; + gmx_rx_int_en.s.rem_fault = 1; + gmx_rx_int_en.s.loc_fault = 1; + gmx_rx_int_en.s.pause_drp = 1; + /* Skipping gmx_rx_int_en.s.reserved_16_18 */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + /* Skipping gmx_rx_int_en.s.reserved_9_9 */ + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /* Skipping gmx_rx_int_en.s.reserved_5_6 */ + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + /* Skipping gmx_rx_int_en.s.reserved_2_2 */ + gmx_rx_int_en.s.carext = 1; + /* Skipping gmx_rx_int_en.s.reserved_0_0 */ + } + if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { + /* Skipping gmx_rx_int_en.s.reserved_19_63 */ + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* Skipping gmx_rx_int_en.s.reserved_20_63 */ + gmx_rx_int_en.s.pause_drp = 1; + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /* Skipping gmx_rx_int_en.s.reserved_6_6 */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + /* Skipping gmx_rx_int_en.s.reserved_2_2 */ + gmx_rx_int_en.s.carext = 1; + /* Skipping gmx_rx_int_en.s.reserved_0_0 */ + } + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + /* Skipping gmx_rx_int_en.s.reserved_19_63 */ + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN31XX)) { + /* Skipping gmx_rx_int_en.s.reserved_19_63 */ + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* Skipping gmx_rx_int_en.s.reserved_20_63 */ + gmx_rx_int_en.s.pause_drp = 1; + /*gmx_rx_int_en.s.phy_dupx = 1; */ + /*gmx_rx_int_en.s.phy_spd = 1; */ + /*gmx_rx_int_en.s.phy_link = 1; */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + gmx_rx_int_en.s.niberr = 1; + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /*gmx_rx_int_en.s.lenerr = 1; // Length errors are handled when we get work */ + gmx_rx_int_en.s.alnerr = 1; + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + gmx_rx_int_en.s.maxerr = 1; + gmx_rx_int_en.s.carext = 1; + gmx_rx_int_en.s.minerr = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + /* Skipping gmx_rx_int_en.s.reserved_29_63 */ + gmx_rx_int_en.s.hg2cc = 1; + gmx_rx_int_en.s.hg2fld = 1; + gmx_rx_int_en.s.undat = 1; + gmx_rx_int_en.s.uneop = 1; + gmx_rx_int_en.s.unsop = 1; + gmx_rx_int_en.s.bad_term = 1; + gmx_rx_int_en.s.bad_seq = 0; + gmx_rx_int_en.s.rem_fault = 1; + gmx_rx_int_en.s.loc_fault = 0; + gmx_rx_int_en.s.pause_drp = 1; + /* Skipping gmx_rx_int_en.s.reserved_16_18 */ + /*gmx_rx_int_en.s.ifgerr = 1; */ + /*gmx_rx_int_en.s.coldet = 1; // Collision detect */ + /*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */ + /*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */ + /*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */ + gmx_rx_int_en.s.ovrerr = 1; + /* Skipping gmx_rx_int_en.s.reserved_9_9 */ + gmx_rx_int_en.s.skperr = 1; + gmx_rx_int_en.s.rcverr = 1; + /* Skipping gmx_rx_int_en.s.reserved_5_6 */ + /*gmx_rx_int_en.s.fcserr = 1; // FCS errors are handled when we get work */ + gmx_rx_int_en.s.jabber = 1; + /* Skipping gmx_rx_int_en.s.reserved_2_2 */ + gmx_rx_int_en.s.carext = 1; + /* Skipping gmx_rx_int_en.s.reserved_0_0 */ + } + cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(index, block), gmx_rx_int_en.u64); +} +/** + * __cvmx_interrupt_pcsx_intx_en_reg_enable enables all interrupt bits in cvmx_pcsx_intx_en_reg_t + */ +void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block) +{ + union cvmx_pcsx_intx_en_reg pcs_int_en_reg; + cvmx_write_csr(CVMX_PCSX_INTX_REG(index, block), + cvmx_read_csr(CVMX_PCSX_INTX_REG(index, block))); + pcs_int_en_reg.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) { + /* Skipping pcs_int_en_reg.s.reserved_12_63 */ + /*pcs_int_en_reg.s.dup = 1; // This happens during normal operation */ + pcs_int_en_reg.s.sync_bad_en = 1; + pcs_int_en_reg.s.an_bad_en = 1; + pcs_int_en_reg.s.rxlock_en = 1; + pcs_int_en_reg.s.rxbad_en = 1; + /*pcs_int_en_reg.s.rxerr_en = 1; // This happens during normal operation */ + pcs_int_en_reg.s.txbad_en = 1; + pcs_int_en_reg.s.txfifo_en = 1; + pcs_int_en_reg.s.txfifu_en = 1; + pcs_int_en_reg.s.an_err_en = 1; + /*pcs_int_en_reg.s.xmit_en = 1; // This happens during normal operation */ + /*pcs_int_en_reg.s.lnkspd_en = 1; // This happens during normal operation */ + } + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + /* Skipping pcs_int_en_reg.s.reserved_12_63 */ + /*pcs_int_en_reg.s.dup = 1; // This happens during normal operation */ + pcs_int_en_reg.s.sync_bad_en = 1; + pcs_int_en_reg.s.an_bad_en = 1; + pcs_int_en_reg.s.rxlock_en = 1; + pcs_int_en_reg.s.rxbad_en = 1; + /*pcs_int_en_reg.s.rxerr_en = 1; // This happens during normal operation */ + pcs_int_en_reg.s.txbad_en = 1; + pcs_int_en_reg.s.txfifo_en = 1; + pcs_int_en_reg.s.txfifu_en = 1; + pcs_int_en_reg.s.an_err_en = 1; + /*pcs_int_en_reg.s.xmit_en = 1; // This happens during normal operation */ + /*pcs_int_en_reg.s.lnkspd_en = 1; // This happens during normal operation */ + } + cvmx_write_csr(CVMX_PCSX_INTX_EN_REG(index, block), pcs_int_en_reg.u64); +} +/** + * __cvmx_interrupt_pcsxx_int_en_reg_enable enables all interrupt bits in cvmx_pcsxx_int_en_reg_t + */ +void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index) +{ + union cvmx_pcsxx_int_en_reg pcsx_int_en_reg; + cvmx_write_csr(CVMX_PCSXX_INT_REG(index), + cvmx_read_csr(CVMX_PCSXX_INT_REG(index))); + pcsx_int_en_reg.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN56XX)) { + /* Skipping pcsx_int_en_reg.s.reserved_6_63 */ + pcsx_int_en_reg.s.algnlos_en = 1; + pcsx_int_en_reg.s.synlos_en = 1; + pcsx_int_en_reg.s.bitlckls_en = 1; + pcsx_int_en_reg.s.rxsynbad_en = 1; + pcsx_int_en_reg.s.rxbad_en = 1; + pcsx_int_en_reg.s.txflt_en = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) { + /* Skipping pcsx_int_en_reg.s.reserved_6_63 */ + pcsx_int_en_reg.s.algnlos_en = 1; + pcsx_int_en_reg.s.synlos_en = 1; + pcsx_int_en_reg.s.bitlckls_en = 0; /* Happens if XAUI module is not installed */ + pcsx_int_en_reg.s.rxsynbad_en = 1; + pcsx_int_en_reg.s.rxbad_en = 1; + pcsx_int_en_reg.s.txflt_en = 1; + } + cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(index), pcsx_int_en_reg.u64); +} + +/** + * __cvmx_interrupt_spxx_int_msk_enable enables all interrupt bits in cvmx_spxx_int_msk_t + */ +void __cvmx_interrupt_spxx_int_msk_enable(int index) +{ + union cvmx_spxx_int_msk spx_int_msk; + cvmx_write_csr(CVMX_SPXX_INT_REG(index), + cvmx_read_csr(CVMX_SPXX_INT_REG(index))); + spx_int_msk.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + /* Skipping spx_int_msk.s.reserved_12_63 */ + spx_int_msk.s.calerr = 1; + spx_int_msk.s.syncerr = 1; + spx_int_msk.s.diperr = 1; + spx_int_msk.s.tpaovr = 1; + spx_int_msk.s.rsverr = 1; + spx_int_msk.s.drwnng = 1; + spx_int_msk.s.clserr = 1; + spx_int_msk.s.spiovr = 1; + /* Skipping spx_int_msk.s.reserved_2_3 */ + spx_int_msk.s.abnorm = 1; + spx_int_msk.s.prtnxa = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* Skipping spx_int_msk.s.reserved_12_63 */ + spx_int_msk.s.calerr = 1; + spx_int_msk.s.syncerr = 1; + spx_int_msk.s.diperr = 1; + spx_int_msk.s.tpaovr = 1; + spx_int_msk.s.rsverr = 1; + spx_int_msk.s.drwnng = 1; + spx_int_msk.s.clserr = 1; + spx_int_msk.s.spiovr = 1; + /* Skipping spx_int_msk.s.reserved_2_3 */ + spx_int_msk.s.abnorm = 1; + spx_int_msk.s.prtnxa = 1; + } + cvmx_write_csr(CVMX_SPXX_INT_MSK(index), spx_int_msk.u64); +} +/** + * __cvmx_interrupt_stxx_int_msk_enable enables all interrupt bits in cvmx_stxx_int_msk_t + */ +void __cvmx_interrupt_stxx_int_msk_enable(int index) +{ + union cvmx_stxx_int_msk stx_int_msk; + cvmx_write_csr(CVMX_STXX_INT_REG(index), + cvmx_read_csr(CVMX_STXX_INT_REG(index))); + stx_int_msk.u64 = 0; + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + /* Skipping stx_int_msk.s.reserved_8_63 */ + stx_int_msk.s.frmerr = 1; + stx_int_msk.s.unxfrm = 1; + stx_int_msk.s.nosync = 1; + stx_int_msk.s.diperr = 1; + stx_int_msk.s.datovr = 1; + stx_int_msk.s.ovrbst = 1; + stx_int_msk.s.calpar1 = 1; + stx_int_msk.s.calpar0 = 1; + } + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* Skipping stx_int_msk.s.reserved_8_63 */ + stx_int_msk.s.frmerr = 1; + stx_int_msk.s.unxfrm = 1; + stx_int_msk.s.nosync = 1; + stx_int_msk.s.diperr = 1; + stx_int_msk.s.datovr = 1; + stx_int_msk.s.ovrbst = 1; + stx_int_msk.s.calpar1 = 1; + stx_int_msk.s.calpar0 = 1; + } + cvmx_write_csr(CVMX_STXX_INT_MSK(index), stx_int_msk.u64); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c new file mode 100644 index 000000000..d23f46736 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c @@ -0,0 +1,140 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Utility functions to decode Octeon's RSL_INT_BLOCKS + * interrupts into error messages. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-asxx-defs.h> +#include <asm/octeon/cvmx-gmxx-defs.h> + +#ifndef PRINT_ERROR +#define PRINT_ERROR(format, ...) +#endif + +void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block); + +/** + * Enable ASX error interrupts that exist on CN3XXX, CN50XX, and + * CN58XX. + * + * @block: Interface to enable 0-1 + */ +void __cvmx_interrupt_asxx_enable(int block) +{ + int mask; + union cvmx_asxx_int_en csr; + /* + * CN38XX and CN58XX have two interfaces with 4 ports per + * interface. All other chips have a max of 3 ports on + * interface 0 + */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) + mask = 0xf; /* Set enables for 4 ports */ + else + mask = 0x7; /* Set enables for 3 ports */ + + /* Enable interface interrupts */ + csr.u64 = cvmx_read_csr(CVMX_ASXX_INT_EN(block)); + csr.s.txpsh = mask; + csr.s.txpop = mask; + csr.s.ovrflw = mask; + cvmx_write_csr(CVMX_ASXX_INT_EN(block), csr.u64); +} +/** + * Enable GMX error reporting for the supplied interface + * + * @interface: Interface to enable + */ +void __cvmx_interrupt_gmxx_enable(int interface) +{ + union cvmx_gmxx_inf_mode mode; + union cvmx_gmxx_tx_int_en gmx_tx_int_en; + int num_ports; + int index; + + mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + if (mode.s.en) { + switch (mode.cn52xx.mode) { + case 1: /* XAUI */ + num_ports = 1; + break; + case 2: /* SGMII */ + case 3: /* PICMG */ + num_ports = 4; + break; + default: /* Disabled */ + num_ports = 0; + break; + } + } else + num_ports = 0; + } else { + if (mode.s.en) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) { + /* + * SPI on CN38XX and CN58XX report all + * errors through port 0. RGMII needs + * to check all 4 ports + */ + if (mode.s.type) + num_ports = 1; + else + num_ports = 4; + } else { + /* + * CN30XX, CN31XX, and CN50XX have two + * or three ports. GMII and MII has 2, + * RGMII has three + */ + if (mode.s.type) + num_ports = 2; + else + num_ports = 3; + } + } else + num_ports = 0; + } + + gmx_tx_int_en.u64 = 0; + if (num_ports) { + if (OCTEON_IS_MODEL(OCTEON_CN38XX) + || OCTEON_IS_MODEL(OCTEON_CN58XX)) + gmx_tx_int_en.cn38xx.ncb_nxa = 1; + gmx_tx_int_en.s.pko_nxa = 1; + } + gmx_tx_int_en.s.undflw = (1 << num_ports) - 1; + cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64); + for (index = 0; index < num_ports; index++) + __cvmx_interrupt_gmxx_rxx_int_en_enable(index, interface); +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c new file mode 100644 index 000000000..83df0a963 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -0,0 +1,920 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2017 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Implementation of the Level 2 Cache (L2C) control, + * measurement, and debugging facilities. + */ + +#include <linux/compiler.h> +#include <linux/irqflags.h> +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-l2c.h> +#include <asm/octeon/cvmx-spinlock.h> + +/* + * This spinlock is used internally to ensure that only one core is + * performing certain L2 operations at a time. + * + * NOTE: This only protects calls from within a single application - + * if multiple applications or operating systems are running, then it + * is up to the user program to coordinate between them. + */ +static cvmx_spinlock_t cvmx_l2c_spinlock; + +int cvmx_l2c_get_core_way_partition(uint32_t core) +{ + uint32_t field; + + /* Validate the core number */ + if (core >= cvmx_octeon_num_cores()) + return -1; + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + return cvmx_read_csr(CVMX_L2C_WPAR_PPX(core)) & 0xffff; + + /* + * Use the lower two bits of the coreNumber to determine the + * bit offset of the UMSK[] field in the L2C_SPAR register. + */ + field = (core & 0x3) * 8; + + /* + * Return the UMSK[] field from the appropriate L2C_SPAR + * register based on the coreNumber. + */ + + switch (core & 0xC) { + case 0x0: + return (cvmx_read_csr(CVMX_L2C_SPAR0) & (0xFF << field)) >> field; + case 0x4: + return (cvmx_read_csr(CVMX_L2C_SPAR1) & (0xFF << field)) >> field; + case 0x8: + return (cvmx_read_csr(CVMX_L2C_SPAR2) & (0xFF << field)) >> field; + case 0xC: + return (cvmx_read_csr(CVMX_L2C_SPAR3) & (0xFF << field)) >> field; + } + return 0; +} + +int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask) +{ + uint32_t field; + uint32_t valid_mask; + + valid_mask = (0x1 << cvmx_l2c_get_num_assoc()) - 1; + + mask &= valid_mask; + + /* A UMSK setting which blocks all L2C Ways is an error on some chips */ + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + return -1; + + /* Validate the core number */ + if (core >= cvmx_octeon_num_cores()) + return -1; + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + cvmx_write_csr(CVMX_L2C_WPAR_PPX(core), mask); + return 0; + } + + /* + * Use the lower two bits of core to determine the bit offset of the + * UMSK[] field in the L2C_SPAR register. + */ + field = (core & 0x3) * 8; + + /* + * Assign the new mask setting to the UMSK[] field in the appropriate + * L2C_SPAR register based on the core_num. + * + */ + switch (core & 0xC) { + case 0x0: + cvmx_write_csr(CVMX_L2C_SPAR0, + (cvmx_read_csr(CVMX_L2C_SPAR0) & ~(0xFF << field)) | + mask << field); + break; + case 0x4: + cvmx_write_csr(CVMX_L2C_SPAR1, + (cvmx_read_csr(CVMX_L2C_SPAR1) & ~(0xFF << field)) | + mask << field); + break; + case 0x8: + cvmx_write_csr(CVMX_L2C_SPAR2, + (cvmx_read_csr(CVMX_L2C_SPAR2) & ~(0xFF << field)) | + mask << field); + break; + case 0xC: + cvmx_write_csr(CVMX_L2C_SPAR3, + (cvmx_read_csr(CVMX_L2C_SPAR3) & ~(0xFF << field)) | + mask << field); + break; + } + return 0; +} + +int cvmx_l2c_set_hw_way_partition(uint32_t mask) +{ + uint32_t valid_mask; + + valid_mask = (0x1 << cvmx_l2c_get_num_assoc()) - 1; + mask &= valid_mask; + + /* A UMSK setting which blocks all L2C Ways is an error on some chips */ + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + return -1; + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + cvmx_write_csr(CVMX_L2C_WPAR_IOBX(0), mask); + else + cvmx_write_csr(CVMX_L2C_SPAR4, + (cvmx_read_csr(CVMX_L2C_SPAR4) & ~0xFF) | mask); + return 0; +} + +int cvmx_l2c_get_hw_way_partition(void) +{ + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + return cvmx_read_csr(CVMX_L2C_WPAR_IOBX(0)) & 0xffff; + else + return cvmx_read_csr(CVMX_L2C_SPAR4) & (0xFF); +} + +void cvmx_l2c_config_perf(uint32_t counter, enum cvmx_l2c_event event, + uint32_t clear_on_read) +{ + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_l2c_pfctl pfctl; + + pfctl.u64 = cvmx_read_csr(CVMX_L2C_PFCTL); + + switch (counter) { + case 0: + pfctl.s.cnt0sel = event; + pfctl.s.cnt0ena = 1; + pfctl.s.cnt0rdclr = clear_on_read; + break; + case 1: + pfctl.s.cnt1sel = event; + pfctl.s.cnt1ena = 1; + pfctl.s.cnt1rdclr = clear_on_read; + break; + case 2: + pfctl.s.cnt2sel = event; + pfctl.s.cnt2ena = 1; + pfctl.s.cnt2rdclr = clear_on_read; + break; + case 3: + default: + pfctl.s.cnt3sel = event; + pfctl.s.cnt3ena = 1; + pfctl.s.cnt3rdclr = clear_on_read; + break; + } + + cvmx_write_csr(CVMX_L2C_PFCTL, pfctl.u64); + } else { + union cvmx_l2c_tadx_prf l2c_tadx_prf; + int tad; + + cvmx_dprintf("L2C performance counter events are different for this chip, mapping 'event' to cvmx_l2c_tad_event_t\n"); + if (clear_on_read) + cvmx_dprintf("L2C counters don't support clear on read for this chip\n"); + + l2c_tadx_prf.u64 = cvmx_read_csr(CVMX_L2C_TADX_PRF(0)); + + switch (counter) { + case 0: + l2c_tadx_prf.s.cnt0sel = event; + break; + case 1: + l2c_tadx_prf.s.cnt1sel = event; + break; + case 2: + l2c_tadx_prf.s.cnt2sel = event; + break; + default: + case 3: + l2c_tadx_prf.s.cnt3sel = event; + break; + } + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + cvmx_write_csr(CVMX_L2C_TADX_PRF(tad), + l2c_tadx_prf.u64); + } +} + +uint64_t cvmx_l2c_read_perf(uint32_t counter) +{ + switch (counter) { + case 0: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC0); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC0(tad)); + return counter; + } + case 1: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC1); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC1(tad)); + return counter; + } + case 2: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC2); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC2(tad)); + return counter; + } + case 3: + default: + if (OCTEON_IS_MODEL(OCTEON_CN5XXX) || OCTEON_IS_MODEL(OCTEON_CN3XXX)) + return cvmx_read_csr(CVMX_L2C_PFC3); + else { + uint64_t counter = 0; + int tad; + + for (tad = 0; tad < CVMX_L2C_TADS; tad++) + counter += cvmx_read_csr(CVMX_L2C_TADX_PFC3(tad)); + return counter; + } + } +} + +/** + * @INTERNAL + * Helper function use to fault in cache lines for L2 cache locking + * + * @addr: Address of base of memory region to read into L2 cache + * @len: Length (in bytes) of region to fault in + */ +static void fault_in(uint64_t addr, int len) +{ + char *ptr; + + /* + * Adjust addr and length so we get all cache lines even for + * small ranges spanning two cache lines. + */ + len += addr & CVMX_CACHE_LINE_MASK; + addr &= ~CVMX_CACHE_LINE_MASK; + ptr = cvmx_phys_to_ptr(addr); + /* + * Invalidate L1 cache to make sure all loads result in data + * being in L2. + */ + CVMX_DCACHE_INVALIDATE; + while (len > 0) { + READ_ONCE(*ptr); + len -= CVMX_CACHE_LINE_SIZE; + ptr += CVMX_CACHE_LINE_SIZE; + } +} + +int cvmx_l2c_lock_line(uint64_t addr) +{ + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + int shift = CVMX_L2C_TAG_ADDR_ALIAS_SHIFT; + uint64_t assoc = cvmx_l2c_get_num_assoc(); + uint64_t tag = addr >> shift; + uint64_t index = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, cvmx_l2c_address_to_index(addr) << CVMX_L2C_IDX_ADDR_SHIFT); + uint64_t way; + union cvmx_l2c_tadx_tag l2c_tadx_tag; + + CVMX_CACHE_LCKL2(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, addr), 0); + + /* Make sure we were able to lock the line */ + for (way = 0; way < assoc; way++) { + CVMX_CACHE_LTGL2I(index | (way << shift), 0); + /* make sure CVMX_L2C_TADX_TAG is updated */ + CVMX_SYNC; + l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); + if (l2c_tadx_tag.s.valid && l2c_tadx_tag.s.tag == tag) + break; + } + + /* Check if a valid line is found */ + if (way >= assoc) { + /* cvmx_dprintf("ERROR: cvmx_l2c_lock_line: line not found for locking at 0x%llx address\n", (unsigned long long)addr); */ + return -1; + } + + /* Check if lock bit is not set */ + if (!l2c_tadx_tag.s.lock) { + /* cvmx_dprintf("ERROR: cvmx_l2c_lock_line: Not able to lock at 0x%llx address\n", (unsigned long long)addr); */ + return -1; + } + return way; + } else { + int retval = 0; + union cvmx_l2c_dbg l2cdbg; + union cvmx_l2c_lckbase lckbase; + union cvmx_l2c_lckoff lckoff; + union cvmx_l2t_err l2t_err; + + cvmx_spinlock_lock(&cvmx_l2c_spinlock); + + l2cdbg.u64 = 0; + lckbase.u64 = 0; + lckoff.u64 = 0; + + /* Clear l2t error bits if set */ + l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR); + l2t_err.s.lckerr = 1; + l2t_err.s.lckerr2 = 1; + cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64); + + addr &= ~CVMX_CACHE_LINE_MASK; + + /* Set this core as debug core */ + l2cdbg.s.ppnum = cvmx_get_core_num(); + CVMX_SYNC; + cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64); + cvmx_read_csr(CVMX_L2C_DBG); + + lckoff.s.lck_offset = 0; /* Only lock 1 line at a time */ + cvmx_write_csr(CVMX_L2C_LCKOFF, lckoff.u64); + cvmx_read_csr(CVMX_L2C_LCKOFF); + + if (((union cvmx_l2c_cfg)(cvmx_read_csr(CVMX_L2C_CFG))).s.idxalias) { + int alias_shift = CVMX_L2C_IDX_ADDR_SHIFT + 2 * CVMX_L2_SET_BITS - 1; + uint64_t addr_tmp = addr ^ (addr & ((1 << alias_shift) - 1)) >> CVMX_L2_SET_BITS; + + lckbase.s.lck_base = addr_tmp >> 7; + + } else { + lckbase.s.lck_base = addr >> 7; + } + + lckbase.s.lck_ena = 1; + cvmx_write_csr(CVMX_L2C_LCKBASE, lckbase.u64); + /* Make sure it gets there */ + cvmx_read_csr(CVMX_L2C_LCKBASE); + + fault_in(addr, CVMX_CACHE_LINE_SIZE); + + lckbase.s.lck_ena = 0; + cvmx_write_csr(CVMX_L2C_LCKBASE, lckbase.u64); + /* Make sure it gets there */ + cvmx_read_csr(CVMX_L2C_LCKBASE); + + /* Stop being debug core */ + cvmx_write_csr(CVMX_L2C_DBG, 0); + cvmx_read_csr(CVMX_L2C_DBG); + + l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR); + if (l2t_err.s.lckerr || l2t_err.s.lckerr2) + retval = 1; /* We were unable to lock the line */ + + cvmx_spinlock_unlock(&cvmx_l2c_spinlock); + return retval; + } +} + +int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len) +{ + int retval = 0; + + /* Round start/end to cache line boundaries */ + len += start & CVMX_CACHE_LINE_MASK; + start &= ~CVMX_CACHE_LINE_MASK; + len = (len + CVMX_CACHE_LINE_MASK) & ~CVMX_CACHE_LINE_MASK; + + while (len) { + retval += cvmx_l2c_lock_line(start); + start += CVMX_CACHE_LINE_SIZE; + len -= CVMX_CACHE_LINE_SIZE; + } + return retval; +} + +void cvmx_l2c_flush(void) +{ + uint64_t assoc, set; + uint64_t n_assoc, n_set; + + n_set = cvmx_l2c_get_num_sets(); + n_assoc = cvmx_l2c_get_num_assoc(); + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + uint64_t address; + /* These may look like constants, but they aren't... */ + int assoc_shift = CVMX_L2C_TAG_ADDR_ALIAS_SHIFT; + int set_shift = CVMX_L2C_IDX_ADDR_SHIFT; + + for (set = 0; set < n_set; set++) { + for (assoc = 0; assoc < n_assoc; assoc++) { + address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + (assoc << assoc_shift) | (set << set_shift)); + CVMX_CACHE_WBIL2I(address, 0); + } + } + } else { + for (set = 0; set < n_set; set++) + for (assoc = 0; assoc < n_assoc; assoc++) + cvmx_l2c_flush_line(assoc, set); + } +} + + +int cvmx_l2c_unlock_line(uint64_t address) +{ + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + int assoc; + union cvmx_l2c_tag tag; + uint32_t tag_addr; + uint32_t index = cvmx_l2c_address_to_index(address); + + tag_addr = ((address >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) & ((1 << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) - 1)); + + /* + * For 63XX, we can flush a line by using the physical + * address directly, so finding the cache line used by + * the address is only required to provide the proper + * return value for the function. + */ + for (assoc = 0; assoc < CVMX_L2_ASSOC; assoc++) { + tag = cvmx_l2c_get_tag(assoc, index); + + if (tag.s.V && (tag.s.addr == tag_addr)) { + CVMX_CACHE_WBIL2(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, address), 0); + return tag.s.L; + } + } + } else { + int assoc; + union cvmx_l2c_tag tag; + uint32_t tag_addr; + + uint32_t index = cvmx_l2c_address_to_index(address); + + /* Compute portion of address that is stored in tag */ + tag_addr = ((address >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) & ((1 << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) - 1)); + for (assoc = 0; assoc < CVMX_L2_ASSOC; assoc++) { + tag = cvmx_l2c_get_tag(assoc, index); + + if (tag.s.V && (tag.s.addr == tag_addr)) { + cvmx_l2c_flush_line(assoc, index); + return tag.s.L; + } + } + } + return 0; +} + +int cvmx_l2c_unlock_mem_region(uint64_t start, uint64_t len) +{ + int num_unlocked = 0; + /* Round start/end to cache line boundaries */ + len += start & CVMX_CACHE_LINE_MASK; + start &= ~CVMX_CACHE_LINE_MASK; + len = (len + CVMX_CACHE_LINE_MASK) & ~CVMX_CACHE_LINE_MASK; + while (len > 0) { + num_unlocked += cvmx_l2c_unlock_line(start); + start += CVMX_CACHE_LINE_SIZE; + len -= CVMX_CACHE_LINE_SIZE; + } + + return num_unlocked; +} + +/* + * Internal l2c tag types. These are converted to a generic structure + * that can be used on all chips. + */ +union __cvmx_l2c_tag { + uint64_t u64; + struct cvmx_l2c_tag_cn50xx { + __BITFIELD_FIELD(uint64_t reserved:40, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:20, /* Phys addr (33..14) */ + ;)))))) + } cn50xx; + struct cvmx_l2c_tag_cn30xx { + __BITFIELD_FIELD(uint64_t reserved:41, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:19, /* Phys addr (33..15) */ + ;)))))) + } cn30xx; + struct cvmx_l2c_tag_cn31xx { + __BITFIELD_FIELD(uint64_t reserved:42, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:18, /* Phys addr (33..16) */ + ;)))))) + } cn31xx; + struct cvmx_l2c_tag_cn38xx { + __BITFIELD_FIELD(uint64_t reserved:43, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:17, /* Phys addr (33..17) */ + ;)))))) + } cn38xx; + struct cvmx_l2c_tag_cn58xx { + __BITFIELD_FIELD(uint64_t reserved:44, + __BITFIELD_FIELD(uint64_t V:1, /* Line valid */ + __BITFIELD_FIELD(uint64_t D:1, /* Line dirty */ + __BITFIELD_FIELD(uint64_t L:1, /* Line locked */ + __BITFIELD_FIELD(uint64_t U:1, /* Use, LRU eviction */ + __BITFIELD_FIELD(uint64_t addr:16, /* Phys addr (33..18) */ + ;)))))) + } cn58xx; + struct cvmx_l2c_tag_cn58xx cn56xx; /* 2048 sets */ + struct cvmx_l2c_tag_cn31xx cn52xx; /* 512 sets */ +}; + + +/** + * @INTERNAL + * Function to read a L2C tag. This code make the current core + * the 'debug core' for the L2. This code must only be executed by + * 1 core at a time. + * + * @assoc: Association (way) of the tag to dump + * @index: Index of the cacheline + * + * Returns The Octeon model specific tag structure. This is + * translated by a wrapper function to a generic form that is + * easier for applications to use. + */ +static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) +{ + + uint64_t debug_tag_addr = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, (index << 7) + 96); + uint64_t core = cvmx_get_core_num(); + union __cvmx_l2c_tag tag_val; + uint64_t dbg_addr = CVMX_L2C_DBG; + unsigned long flags; + union cvmx_l2c_dbg debug_val; + + debug_val.u64 = 0; + /* + * For low core count parts, the core number is always small + * enough to stay in the correct field and not set any + * reserved bits. + */ + debug_val.s.ppnum = core; + debug_val.s.l2t = 1; + debug_val.s.set = assoc; + + local_irq_save(flags); + /* + * Make sure core is quiet (no prefetches, etc.) before + * entering debug mode. + */ + CVMX_SYNC; + /* Flush L1 to make sure debug load misses L1 */ + CVMX_DCACHE_INVALIDATE; + + /* + * The following must be done in assembly as when in debug + * mode all data loads from L2 return special debug data, not + * normal memory contents. Also, interrupts must be disabled, + * since if an interrupt occurs while in debug mode the ISR + * will get debug data from all its memory * reads instead of + * the contents of memory. + */ + + asm volatile ( + ".set push\n\t" + ".set mips64\n\t" + ".set noreorder\n\t" + "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ + "ld $0, 0(%[dbg_addr])\n\t" + "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ + "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ + "ld $0, 0(%[dbg_addr])\n\t" + "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ + ".set pop" + : [tag_val] "=r" (tag_val) + : [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr) + : "memory"); + + local_irq_restore(flags); + + return tag_val; +} + + +union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) +{ + union cvmx_l2c_tag tag; + + tag.u64 = 0; + if ((int)association >= cvmx_l2c_get_num_assoc()) { + cvmx_dprintf("ERROR: cvmx_l2c_get_tag association out of range\n"); + return tag; + } + if ((int)index >= cvmx_l2c_get_num_sets()) { + cvmx_dprintf("ERROR: cvmx_l2c_get_tag index out of range (arg: %d, max: %d)\n", + (int)index, cvmx_l2c_get_num_sets()); + return tag; + } + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + union cvmx_l2c_tadx_tag l2c_tadx_tag; + uint64_t address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + (association << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) | + (index << CVMX_L2C_IDX_ADDR_SHIFT)); + /* + * Use L2 cache Index load tag cache instruction, as + * hardware loads the virtual tag for the L2 cache + * block with the contents of L2C_TAD0_TAG + * register. + */ + CVMX_CACHE_LTGL2I(address, 0); + CVMX_SYNC; /* make sure CVMX_L2C_TADX_TAG is updated */ + l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); + + tag.s.V = l2c_tadx_tag.s.valid; + tag.s.D = l2c_tadx_tag.s.dirty; + tag.s.L = l2c_tadx_tag.s.lock; + tag.s.U = l2c_tadx_tag.s.use; + tag.s.addr = l2c_tadx_tag.s.tag; + } else { + union __cvmx_l2c_tag tmp_tag; + /* __read_l2_tag is intended for internal use only */ + tmp_tag = __read_l2_tag(association, index); + + /* + * Convert all tag structure types to generic version, + * as it can represent all models. + */ + if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) { + tag.s.V = tmp_tag.cn58xx.V; + tag.s.D = tmp_tag.cn58xx.D; + tag.s.L = tmp_tag.cn58xx.L; + tag.s.U = tmp_tag.cn58xx.U; + tag.s.addr = tmp_tag.cn58xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + tag.s.V = tmp_tag.cn38xx.V; + tag.s.D = tmp_tag.cn38xx.D; + tag.s.L = tmp_tag.cn38xx.L; + tag.s.U = tmp_tag.cn38xx.U; + tag.s.addr = tmp_tag.cn38xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + tag.s.V = tmp_tag.cn31xx.V; + tag.s.D = tmp_tag.cn31xx.D; + tag.s.L = tmp_tag.cn31xx.L; + tag.s.U = tmp_tag.cn31xx.U; + tag.s.addr = tmp_tag.cn31xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { + tag.s.V = tmp_tag.cn30xx.V; + tag.s.D = tmp_tag.cn30xx.D; + tag.s.L = tmp_tag.cn30xx.L; + tag.s.U = tmp_tag.cn30xx.U; + tag.s.addr = tmp_tag.cn30xx.addr; + } else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { + tag.s.V = tmp_tag.cn50xx.V; + tag.s.D = tmp_tag.cn50xx.D; + tag.s.L = tmp_tag.cn50xx.L; + tag.s.U = tmp_tag.cn50xx.U; + tag.s.addr = tmp_tag.cn50xx.addr; + } else { + cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); + } + } + return tag; +} + +uint32_t cvmx_l2c_address_to_index(uint64_t addr) +{ + uint64_t idx = addr >> CVMX_L2C_IDX_ADDR_SHIFT; + int indxalias = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN6XXX)) { + union cvmx_l2c_ctl l2c_ctl; + + l2c_ctl.u64 = cvmx_read_csr(CVMX_L2C_CTL); + indxalias = !l2c_ctl.s.disidxalias; + } else { + union cvmx_l2c_cfg l2c_cfg; + + l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG); + indxalias = l2c_cfg.s.idxalias; + } + + if (indxalias) { + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + uint32_t a_14_12 = (idx / (CVMX_L2C_MEMBANK_SELECT_SIZE/(1<<CVMX_L2C_IDX_ADDR_SHIFT))) & 0x7; + + idx ^= idx / cvmx_l2c_get_num_sets(); + idx ^= a_14_12; + } else { + idx ^= ((addr & CVMX_L2C_ALIAS_MASK) >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT); + } + } + idx &= CVMX_L2C_IDX_MASK; + return idx; +} + +int cvmx_l2c_get_cache_size_bytes(void) +{ + return cvmx_l2c_get_num_sets() * cvmx_l2c_get_num_assoc() * + CVMX_CACHE_LINE_SIZE; +} + +/** + * Return log base 2 of the number of sets in the L2 cache + * Returns + */ +int cvmx_l2c_get_set_bits(void) +{ + int l2_set_bits; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)) + l2_set_bits = 11; /* 2048 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN63XX)) + l2_set_bits = 10; /* 1024 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) + l2_set_bits = 9; /* 512 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) + l2_set_bits = 8; /* 256 sets */ + else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) + l2_set_bits = 7; /* 128 sets */ + else { + cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); + l2_set_bits = 11; /* 2048 sets */ + } + return l2_set_bits; +} + +/* Return the number of sets in the L2 Cache */ +int cvmx_l2c_get_num_sets(void) +{ + return 1 << cvmx_l2c_get_set_bits(); +} + +/* Return the number of associations in the L2 Cache */ +int cvmx_l2c_get_num_assoc(void) +{ + int l2_assoc; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || + OCTEON_IS_MODEL(OCTEON_CN52XX) || + OCTEON_IS_MODEL(OCTEON_CN58XX) || + OCTEON_IS_MODEL(OCTEON_CN50XX) || + OCTEON_IS_MODEL(OCTEON_CN38XX)) + l2_assoc = 8; + else if (OCTEON_IS_MODEL(OCTEON_CN63XX)) + l2_assoc = 16; + else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || + OCTEON_IS_MODEL(OCTEON_CN30XX)) + l2_assoc = 4; + else { + cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); + l2_assoc = 8; + } + + /* Check to see if part of the cache is disabled */ + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + union cvmx_mio_fus_dat3 mio_fus_dat3; + + mio_fus_dat3.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT3); + /* + * cvmx_mio_fus_dat3.s.l2c_crip fuses map as follows + * <2> will be not used for 63xx + * <1> disables 1/2 ways + * <0> disables 1/4 ways + * They are cumulative, so for 63xx: + * <1> <0> + * 0 0 16-way 2MB cache + * 0 1 12-way 1.5MB cache + * 1 0 8-way 1MB cache + * 1 1 4-way 512KB cache + */ + + if (mio_fus_dat3.s.l2c_crip == 3) + l2_assoc = 4; + else if (mio_fus_dat3.s.l2c_crip == 2) + l2_assoc = 8; + else if (mio_fus_dat3.s.l2c_crip == 1) + l2_assoc = 12; + } else { + uint64_t l2d_fus3; + + l2d_fus3 = cvmx_read_csr(CVMX_L2D_FUS3); + /* + * Using shifts here, as bit position names are + * different for each model but they all mean the + * same. + */ + if ((l2d_fus3 >> 35) & 0x1) + l2_assoc = l2_assoc >> 2; + else if ((l2d_fus3 >> 34) & 0x1) + l2_assoc = l2_assoc >> 1; + } + return l2_assoc; +} + +/** + * Flush a line from the L2 cache + * This should only be called from one core at a time, as this routine + * sets the core to the 'debug' core in order to flush the line. + * + * @assoc: Association (or way) to flush + * @index: Index to flush + */ +void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index) +{ + /* Check the range of the index. */ + if (index > (uint32_t)cvmx_l2c_get_num_sets()) { + cvmx_dprintf("ERROR: cvmx_l2c_flush_line index out of range.\n"); + return; + } + + /* Check the range of association. */ + if (assoc > (uint32_t)cvmx_l2c_get_num_assoc()) { + cvmx_dprintf("ERROR: cvmx_l2c_flush_line association out of range.\n"); + return; + } + + if (OCTEON_IS_MODEL(OCTEON_CN63XX)) { + uint64_t address; + /* Create the address based on index and association. + * Bits<20:17> select the way of the cache block involved in + * the operation + * Bits<16:7> of the effect address select the index + */ + address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + (assoc << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) | + (index << CVMX_L2C_IDX_ADDR_SHIFT)); + CVMX_CACHE_WBIL2I(address, 0); + } else { + union cvmx_l2c_dbg l2cdbg; + + l2cdbg.u64 = 0; + if (!OCTEON_IS_MODEL(OCTEON_CN30XX)) + l2cdbg.s.ppnum = cvmx_get_core_num(); + l2cdbg.s.finv = 1; + + l2cdbg.s.set = assoc; + cvmx_spinlock_lock(&cvmx_l2c_spinlock); + /* + * Enter debug mode, and make sure all other writes + * complete before we enter debug mode + */ + CVMX_SYNC; + cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64); + cvmx_read_csr(CVMX_L2C_DBG); + + CVMX_PREPARE_FOR_STORE(CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, + index * CVMX_CACHE_LINE_SIZE), + 0); + /* Exit debug mode */ + CVMX_SYNC; + cvmx_write_csr(CVMX_L2C_DBG, 0); + cvmx_read_csr(CVMX_L2C_DBG); + cvmx_spinlock_unlock(&cvmx_l2c_spinlock); + } +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c new file mode 100644 index 000000000..b0efc35e9 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -0,0 +1,646 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * Support library for the hardware Packet Output unit. + */ + +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-helper.h> + +/** + * Internal state of packet output + */ + +static int __cvmx_pko_int(int interface, int index) +{ + switch (interface) { + case 0: + return index; + case 1: + return 4; + case 2: + return index + 0x08; + case 3: + return index + 0x0c; + case 4: + return index + 0x10; + case 5: + return 0x1c; + case 6: + return 0x1d; + case 7: + return 0x1e; + case 8: + return 0x1f; + default: + return -1; + } +} + +static void __cvmx_pko_iport_config(int pko_port) +{ + int queue; + const int num_queues = 1; + const int base_queue = pko_port; + const int static_priority_end = 1; + const int static_priority_base = 1; + + for (queue = 0; queue < num_queues; queue++) { + union cvmx_pko_mem_iqueue_ptrs config; + cvmx_cmd_queue_result_t cmd_res; + uint64_t *buf_ptr; + + config.u64 = 0; + config.s.index = queue; + config.s.qid = base_queue + queue; + config.s.ipid = pko_port; + config.s.tail = (queue == (num_queues - 1)); + config.s.s_tail = (queue == static_priority_end); + config.s.static_p = (static_priority_base >= 0); + config.s.static_q = (queue <= static_priority_end); + config.s.qos_mask = 0xff; + + cmd_res = cvmx_cmd_queue_initialize( + CVMX_CMD_QUEUE_PKO(base_queue + queue), + CVMX_PKO_MAX_QUEUE_DEPTH, + CVMX_FPA_OUTPUT_BUFFER_POOL, + (CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE - + CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST * 8)); + + WARN(cmd_res, + "%s: cmd_res=%d pko_port=%d base_queue=%d num_queues=%d queue=%d\n", + __func__, (int)cmd_res, pko_port, base_queue, + num_queues, queue); + + buf_ptr = (uint64_t *)cvmx_cmd_queue_buffer( + CVMX_CMD_QUEUE_PKO(base_queue + queue)); + config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr) >> 7; + CVMX_SYNCWS; + cvmx_write_csr(CVMX_PKO_MEM_IQUEUE_PTRS, config.u64); + } +} + +static void __cvmx_pko_queue_alloc_o68(void) +{ + int port; + + for (port = 0; port < 48; port++) + __cvmx_pko_iport_config(port); +} + +static void __cvmx_pko_port_map_o68(void) +{ + int port; + int interface, index; + cvmx_helper_interface_mode_t mode; + union cvmx_pko_mem_iport_ptrs config; + + /* + * Initialize every iport with the invalid eid. + */ + config.u64 = 0; + config.s.eid = 31; /* Invalid */ + for (port = 0; port < 128; port++) { + config.s.ipid = port; + cvmx_write_csr(CVMX_PKO_MEM_IPORT_PTRS, config.u64); + } + + /* + * Set up PKO_MEM_IPORT_PTRS + */ + for (port = 0; port < 48; port++) { + interface = cvmx_helper_get_interface_num(port); + index = cvmx_helper_get_interface_index_num(port); + mode = cvmx_helper_interface_get_mode(interface); + if (mode == CVMX_HELPER_INTERFACE_MODE_DISABLED) + continue; + + config.s.ipid = port; + config.s.qos_mask = 0xff; + config.s.crc = 1; + config.s.min_pkt = 1; + config.s.intr = __cvmx_pko_int(interface, index); + config.s.eid = config.s.intr; + config.s.pipe = (mode == CVMX_HELPER_INTERFACE_MODE_LOOP) ? + index : port; + cvmx_write_csr(CVMX_PKO_MEM_IPORT_PTRS, config.u64); + } +} + +static void __cvmx_pko_chip_init(void) +{ + int i; + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { + __cvmx_pko_port_map_o68(); + __cvmx_pko_queue_alloc_o68(); + return; + } + + /* + * Initialize queues + */ + for (i = 0; i < CVMX_PKO_MAX_OUTPUT_QUEUES; i++) { + const uint64_t priority = 8; + + cvmx_pko_config_port(CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID, i, 1, + &priority); + } +} + +/** + * Call before any other calls to initialize the packet + * output system. This does chip global config, and should only be + * done by one core. + */ + +void cvmx_pko_initialize_global(void) +{ + union cvmx_pko_reg_cmd_buf config; + + /* + * Set the size of the PKO command buffers to an odd number of + * 64bit words. This allows the normal two word send to stay + * aligned and never span a command word buffer. + */ + config.u64 = 0; + config.s.pool = CVMX_FPA_OUTPUT_BUFFER_POOL; + config.s.size = CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE / 8 - 1; + + cvmx_write_csr(CVMX_PKO_REG_CMD_BUF, config.u64); + + /* + * Chip-specific setup. + */ + __cvmx_pko_chip_init(); + + /* + * If we aren't using all of the queues optimize PKO's + * internal memory. + */ + if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX) + || OCTEON_IS_MODEL(OCTEON_CN56XX) + || OCTEON_IS_MODEL(OCTEON_CN52XX)) { + int num_interfaces = cvmx_helper_get_number_of_interfaces(); + int last_port = + cvmx_helper_get_last_ipd_port(num_interfaces - 1); + int max_queues = + cvmx_pko_get_base_queue(last_port) + + cvmx_pko_get_num_queues(last_port); + if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { + if (max_queues <= 32) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 2); + else if (max_queues <= 64) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 1); + } else { + if (max_queues <= 64) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 2); + else if (max_queues <= 128) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 1); + } + } +} + +/** + * This function does per-core initialization required by the PKO routines. + * This must be called on all cores that will do packet output, and must + * be called after the FPA has been initialized and filled with pages. + * + * Returns 0 on success + * !0 on failure + */ +int cvmx_pko_initialize_local(void) +{ + /* Nothing to do */ + return 0; +} + +/** + * Enables the packet output hardware. It must already be + * configured. + */ +void cvmx_pko_enable(void) +{ + union cvmx_pko_reg_flags flags; + + flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); + if (flags.s.ena_pko) + cvmx_dprintf + ("Warning: Enabling PKO when PKO already enabled.\n"); + + flags.s.ena_dwb = 1; + flags.s.ena_pko = 1; + /* + * always enable big endian for 3-word command. Does nothing + * for 2-word. + */ + flags.s.store_be = 1; + cvmx_write_csr(CVMX_PKO_REG_FLAGS, flags.u64); +} + +/** + * Disables the packet output. Does not affect any configuration. + */ +void cvmx_pko_disable(void) +{ + union cvmx_pko_reg_flags pko_reg_flags; + pko_reg_flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); + pko_reg_flags.s.ena_pko = 0; + cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); +} +EXPORT_SYMBOL_GPL(cvmx_pko_disable); + +/** + * Reset the packet output. + */ +static void __cvmx_pko_reset(void) +{ + union cvmx_pko_reg_flags pko_reg_flags; + pko_reg_flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); + pko_reg_flags.s.reset = 1; + cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); +} + +/** + * Shutdown and free resources required by packet output. + */ +void cvmx_pko_shutdown(void) +{ + union cvmx_pko_mem_queue_ptrs config; + int queue; + + cvmx_pko_disable(); + + for (queue = 0; queue < CVMX_PKO_MAX_OUTPUT_QUEUES; queue++) { + config.u64 = 0; + config.s.tail = 1; + config.s.index = 0; + config.s.port = CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID; + config.s.queue = queue & 0x7f; + config.s.qos_mask = 0; + config.s.buf_ptr = 0; + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) { + union cvmx_pko_reg_queue_ptrs1 config1; + config1.u64 = 0; + config1.s.qid7 = queue >> 7; + cvmx_write_csr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64); + } + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64); + cvmx_cmd_queue_shutdown(CVMX_CMD_QUEUE_PKO(queue)); + } + __cvmx_pko_reset(); +} +EXPORT_SYMBOL_GPL(cvmx_pko_shutdown); + +/** + * Configure a output port and the associated queues for use. + * + * @port: Port to configure. + * @base_queue: First queue number to associate with this port. + * @num_queues: Number of queues to associate with this port + * @priority: Array of priority levels for each queue. Values are + * allowed to be 0-8. A value of 8 get 8 times the traffic + * of a value of 1. A value of 0 indicates that no rounds + * will be participated in. These priorities can be changed + * on the fly while the pko is enabled. A priority of 9 + * indicates that static priority should be used. If static + * priority is used all queues with static priority must be + * contiguous starting at the base_queue, and lower numbered + * queues have higher priority than higher numbered queues. + * There must be num_queues elements in the array. + */ +cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, + uint64_t num_queues, + const uint64_t priority[]) +{ + cvmx_pko_status_t result_code; + uint64_t queue; + union cvmx_pko_mem_queue_ptrs config; + union cvmx_pko_reg_queue_ptrs1 config1; + int static_priority_base = -1; + int static_priority_end = -1; + + if (OCTEON_IS_MODEL(OCTEON_CN68XX)) + return CVMX_PKO_SUCCESS; + + if ((port >= CVMX_PKO_NUM_OUTPUT_PORTS) + && (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID)) { + cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid port %llu\n", + (unsigned long long)port); + return CVMX_PKO_INVALID_PORT; + } + + if (base_queue + num_queues > CVMX_PKO_MAX_OUTPUT_QUEUES) { + cvmx_dprintf + ("ERROR: cvmx_pko_config_port: Invalid queue range %llu\n", + (unsigned long long)(base_queue + num_queues)); + return CVMX_PKO_INVALID_QUEUE; + } + + if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) { + /* + * Validate the static queue priority setup and set + * static_priority_base and static_priority_end + * accordingly. + */ + for (queue = 0; queue < num_queues; queue++) { + /* Find first queue of static priority */ + if (static_priority_base == -1 + && priority[queue] == + CVMX_PKO_QUEUE_STATIC_PRIORITY) + static_priority_base = queue; + /* Find last queue of static priority */ + if (static_priority_base != -1 + && static_priority_end == -1 + && priority[queue] != CVMX_PKO_QUEUE_STATIC_PRIORITY + && queue) + static_priority_end = queue - 1; + else if (static_priority_base != -1 + && static_priority_end == -1 + && queue == num_queues - 1) + /* all queues are static priority */ + static_priority_end = queue; + /* + * Check to make sure all static priority + * queues are contiguous. Also catches some + * cases of static priorites not starting at + * queue 0. + */ + if (static_priority_end != -1 + && (int)queue > static_priority_end + && priority[queue] == + CVMX_PKO_QUEUE_STATIC_PRIORITY) { + cvmx_dprintf("ERROR: cvmx_pko_config_port: " + "Static priority queues aren't " + "contiguous or don't start at " + "base queue. q: %d, eq: %d\n", + (int)queue, static_priority_end); + return CVMX_PKO_INVALID_PRIORITY; + } + } + if (static_priority_base > 0) { + cvmx_dprintf("ERROR: cvmx_pko_config_port: Static " + "priority queues don't start at base " + "queue. sq: %d\n", + static_priority_base); + return CVMX_PKO_INVALID_PRIORITY; + } +#if 0 + cvmx_dprintf("Port %d: Static priority queue base: %d, " + "end: %d\n", port, + static_priority_base, static_priority_end); +#endif + } + /* + * At this point, static_priority_base and static_priority_end + * are either both -1, or are valid start/end queue + * numbers. + */ + + result_code = CVMX_PKO_SUCCESS; + +#ifdef PKO_DEBUG + cvmx_dprintf("num queues: %d (%lld,%lld)\n", num_queues, + CVMX_PKO_QUEUES_PER_PORT_INTERFACE0, + CVMX_PKO_QUEUES_PER_PORT_INTERFACE1); +#endif + + for (queue = 0; queue < num_queues; queue++) { + uint64_t *buf_ptr = NULL; + + config1.u64 = 0; + config1.s.idx3 = queue >> 3; + config1.s.qid7 = (base_queue + queue) >> 7; + + config.u64 = 0; + config.s.tail = queue == (num_queues - 1); + config.s.index = queue; + config.s.port = port; + config.s.queue = base_queue + queue; + + if (!cvmx_octeon_is_pass1()) { + config.s.static_p = static_priority_base >= 0; + config.s.static_q = (int)queue <= static_priority_end; + config.s.s_tail = (int)queue == static_priority_end; + } + /* + * Convert the priority into an enable bit field. Try + * to space the bits out evenly so the packet don't + * get grouped up + */ + switch ((int)priority[queue]) { + case 0: + config.s.qos_mask = 0x00; + break; + case 1: + config.s.qos_mask = 0x01; + break; + case 2: + config.s.qos_mask = 0x11; + break; + case 3: + config.s.qos_mask = 0x49; + break; + case 4: + config.s.qos_mask = 0x55; + break; + case 5: + config.s.qos_mask = 0x57; + break; + case 6: + config.s.qos_mask = 0x77; + break; + case 7: + config.s.qos_mask = 0x7f; + break; + case 8: + config.s.qos_mask = 0xff; + break; + case CVMX_PKO_QUEUE_STATIC_PRIORITY: + if (!cvmx_octeon_is_pass1()) { + config.s.qos_mask = 0xff; + break; + } + fallthrough; /* to the error case, when Pass 1 */ + default: + cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid " + "priority %llu\n", + (unsigned long long)priority[queue]); + config.s.qos_mask = 0xff; + result_code = CVMX_PKO_INVALID_PRIORITY; + break; + } + + if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) { + cvmx_cmd_queue_result_t cmd_res = + cvmx_cmd_queue_initialize(CVMX_CMD_QUEUE_PKO + (base_queue + queue), + CVMX_PKO_MAX_QUEUE_DEPTH, + CVMX_FPA_OUTPUT_BUFFER_POOL, + CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE + - + CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST + * 8); + if (cmd_res != CVMX_CMD_QUEUE_SUCCESS) { + switch (cmd_res) { + case CVMX_CMD_QUEUE_NO_MEMORY: + cvmx_dprintf("ERROR: " + "cvmx_pko_config_port: " + "Unable to allocate " + "output buffer.\n"); + return CVMX_PKO_NO_MEMORY; + case CVMX_CMD_QUEUE_ALREADY_SETUP: + cvmx_dprintf + ("ERROR: cvmx_pko_config_port: Port already setup.\n"); + return CVMX_PKO_PORT_ALREADY_SETUP; + case CVMX_CMD_QUEUE_INVALID_PARAM: + default: + cvmx_dprintf + ("ERROR: cvmx_pko_config_port: Command queue initialization failed.\n"); + return CVMX_PKO_CMD_QUEUE_INIT_ERROR; + } + } + + buf_ptr = + (uint64_t *) + cvmx_cmd_queue_buffer(CVMX_CMD_QUEUE_PKO + (base_queue + queue)); + config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr); + } else + config.s.buf_ptr = 0; + + CVMX_SYNCWS; + + if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) + cvmx_write_csr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64); + cvmx_write_csr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64); + } + + return result_code; +} + +#ifdef PKO_DEBUG +/** + * Show map of ports -> queues for different cores. + */ +void cvmx_pko_show_queue_map() +{ + int core, port; + int pko_output_ports = 36; + + cvmx_dprintf("port"); + for (port = 0; port < pko_output_ports; port++) + cvmx_dprintf("%3d ", port); + cvmx_dprintf("\n"); + + for (core = 0; core < CVMX_MAX_CORES; core++) { + cvmx_dprintf("\n%2d: ", core); + for (port = 0; port < pko_output_ports; port++) { + cvmx_dprintf("%3d ", + cvmx_pko_get_base_queue_per_core(port, + core)); + } + } + cvmx_dprintf("\n"); +} +#endif + +/** + * Rate limit a PKO port to a max packets/sec. This function is only + * supported on CN51XX and higher, excluding CN58XX. + * + * @port: Port to rate limit + * @packets_s: Maximum packet/sec + * @burst: Maximum number of packets to burst in a row before rate + * limiting cuts in. + * + * Returns Zero on success, negative on failure + */ +int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) +{ + union cvmx_pko_mem_port_rate0 pko_mem_port_rate0; + union cvmx_pko_mem_port_rate1 pko_mem_port_rate1; + + pko_mem_port_rate0.u64 = 0; + pko_mem_port_rate0.s.pid = port; + pko_mem_port_rate0.s.rate_pkt = + cvmx_sysinfo_get()->cpu_clock_hz / packets_s / 16; + /* No cost per word since we are limited by packets/sec, not bits/sec */ + pko_mem_port_rate0.s.rate_word = 0; + + pko_mem_port_rate1.u64 = 0; + pko_mem_port_rate1.s.pid = port; + pko_mem_port_rate1.s.rate_lim = + ((uint64_t) pko_mem_port_rate0.s.rate_pkt * burst) >> 8; + + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE0, pko_mem_port_rate0.u64); + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE1, pko_mem_port_rate1.u64); + return 0; +} + +/** + * Rate limit a PKO port to a max bits/sec. This function is only + * supported on CN51XX and higher, excluding CN58XX. + * + * @port: Port to rate limit + * @bits_s: PKO rate limit in bits/sec + * @burst: Maximum number of bits to burst before rate + * limiting cuts in. + * + * Returns Zero on success, negative on failure + */ +int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst) +{ + union cvmx_pko_mem_port_rate0 pko_mem_port_rate0; + union cvmx_pko_mem_port_rate1 pko_mem_port_rate1; + uint64_t clock_rate = cvmx_sysinfo_get()->cpu_clock_hz; + uint64_t tokens_per_bit = clock_rate * 16 / bits_s; + + pko_mem_port_rate0.u64 = 0; + pko_mem_port_rate0.s.pid = port; + /* + * Each packet has a 12 bytes of interframe gap, an 8 byte + * preamble, and a 4 byte CRC. These are not included in the + * per word count. Multiply by 8 to covert to bits and divide + * by 256 for limit granularity. + */ + pko_mem_port_rate0.s.rate_pkt = (12 + 8 + 4) * 8 * tokens_per_bit / 256; + /* Each 8 byte word has 64bits */ + pko_mem_port_rate0.s.rate_word = 64 * tokens_per_bit; + + pko_mem_port_rate1.u64 = 0; + pko_mem_port_rate1.s.pid = port; + pko_mem_port_rate1.s.rate_lim = tokens_per_bit * burst / 256; + + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE0, pko_mem_port_rate0.u64); + cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE1, pko_mem_port_rate1.u64); + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c new file mode 100644 index 000000000..f51957a3e --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -0,0 +1,668 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Support library for the SPI + */ +#include <asm/octeon/octeon.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-pko.h> +#include <asm/octeon/cvmx-spi.h> + +#include <asm/octeon/cvmx-spxx-defs.h> +#include <asm/octeon/cvmx-stxx-defs.h> +#include <asm/octeon/cvmx-srxx-defs.h> + +#define INVOKE_CB(function_p, args...) \ + do { \ + if (function_p) { \ + res = function_p(args); \ + if (res) \ + return res; \ + } \ + } while (0) + +#if CVMX_ENABLE_DEBUG_PRINTS +static const char *modes[] = + { "UNKNOWN", "TX Halfplex", "Rx Halfplex", "Duplex" }; +#endif + +/* Default callbacks, can be overridden + * using cvmx_spi_get_callbacks/cvmx_spi_set_callbacks + */ +static cvmx_spi_callbacks_t cvmx_spi_callbacks = { + .reset_cb = cvmx_spi_reset_cb, + .calendar_setup_cb = cvmx_spi_calendar_setup_cb, + .clock_detect_cb = cvmx_spi_clock_detect_cb, + .training_cb = cvmx_spi_training_cb, + .calendar_sync_cb = cvmx_spi_calendar_sync_cb, + .interface_up_cb = cvmx_spi_interface_up_cb +}; + +/** + * Get current SPI4 initialization callbacks + * + * @callbacks: Pointer to the callbacks structure.to fill + * + * Returns Pointer to cvmx_spi_callbacks_t structure. + */ +void cvmx_spi_get_callbacks(cvmx_spi_callbacks_t *callbacks) +{ + memcpy(callbacks, &cvmx_spi_callbacks, sizeof(cvmx_spi_callbacks)); +} + +/** + * Set new SPI4 initialization callbacks + * + * @new_callbacks: Pointer to an updated callbacks structure. + */ +void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks) +{ + memcpy(&cvmx_spi_callbacks, new_callbacks, sizeof(cvmx_spi_callbacks)); +} + +/** + * Initialize and start the SPI interface. + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * @num_ports: Number of SPI ports to configure + * + * Returns Zero on success, negative of failure. + */ +int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, + int num_ports) +{ + int res = -1; + + if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))) + return res; + + /* Callback to perform SPI4 reset */ + INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); + + /* Callback to perform calendar setup */ + INVOKE_CB(cvmx_spi_callbacks.calendar_setup_cb, interface, mode, + num_ports); + + /* Callback to perform clock detection */ + INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); + + /* Callback to perform SPI4 link training */ + INVOKE_CB(cvmx_spi_callbacks.training_cb, interface, mode, timeout); + + /* Callback to perform calendar sync */ + INVOKE_CB(cvmx_spi_callbacks.calendar_sync_cb, interface, mode, + timeout); + + /* Callback to handle interface coming up */ + INVOKE_CB(cvmx_spi_callbacks.interface_up_cb, interface, mode); + + return res; +} + +/** + * This routine restarts the SPI interface after it has lost synchronization + * with its correspondent system. + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * + * Returns Zero on success, negative of failure. + */ +int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) +{ + int res = -1; + + if (!(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))) + return res; + + cvmx_dprintf("SPI%d: Restart %s\n", interface, modes[mode]); + + /* Callback to perform SPI4 reset */ + INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); + + /* NOTE: Calendar setup is not performed during restart */ + /* Refer to cvmx_spi_start_interface() for the full sequence */ + + /* Callback to perform clock detection */ + INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); + + /* Callback to perform SPI4 link training */ + INVOKE_CB(cvmx_spi_callbacks.training_cb, interface, mode, timeout); + + /* Callback to perform calendar sync */ + INVOKE_CB(cvmx_spi_callbacks.calendar_sync_cb, interface, mode, + timeout); + + /* Callback to handle interface coming up */ + INVOKE_CB(cvmx_spi_callbacks.interface_up_cb, interface, mode); + + return res; +} +EXPORT_SYMBOL_GPL(cvmx_spi_restart_interface); + +/** + * Callback to perform SPI4 reset + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode) +{ + union cvmx_spxx_dbg_deskew_ctl spxx_dbg_deskew_ctl; + union cvmx_spxx_clk_ctl spxx_clk_ctl; + union cvmx_spxx_bist_stat spxx_bist_stat; + union cvmx_spxx_int_msk spxx_int_msk; + union cvmx_stxx_int_msk stxx_int_msk; + union cvmx_spxx_trn4_ctl spxx_trn4_ctl; + int index; + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + + /* Disable SPI error events while we run BIST */ + spxx_int_msk.u64 = cvmx_read_csr(CVMX_SPXX_INT_MSK(interface)); + cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0); + stxx_int_msk.u64 = cvmx_read_csr(CVMX_STXX_INT_MSK(interface)); + cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0); + + /* Run BIST in the SPI interface */ + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), 0); + cvmx_write_csr(CVMX_STXX_COM_CTL(interface), 0); + spxx_clk_ctl.u64 = 0; + spxx_clk_ctl.s.runbist = 1; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + __delay(10 * MS); + spxx_bist_stat.u64 = cvmx_read_csr(CVMX_SPXX_BIST_STAT(interface)); + if (spxx_bist_stat.s.stat0) + cvmx_dprintf + ("ERROR SPI%d: BIST failed on receive datapath FIFO\n", + interface); + if (spxx_bist_stat.s.stat1) + cvmx_dprintf("ERROR SPI%d: BIST failed on RX calendar table\n", + interface); + if (spxx_bist_stat.s.stat2) + cvmx_dprintf("ERROR SPI%d: BIST failed on TX calendar table\n", + interface); + + /* Clear the calendar table after BIST to fix parity errors */ + for (index = 0; index < 32; index++) { + union cvmx_srxx_spi4_calx srxx_spi4_calx; + union cvmx_stxx_spi4_calx stxx_spi4_calx; + + srxx_spi4_calx.u64 = 0; + srxx_spi4_calx.s.oddpar = 1; + cvmx_write_csr(CVMX_SRXX_SPI4_CALX(index, interface), + srxx_spi4_calx.u64); + + stxx_spi4_calx.u64 = 0; + stxx_spi4_calx.s.oddpar = 1; + cvmx_write_csr(CVMX_STXX_SPI4_CALX(index, interface), + stxx_spi4_calx.u64); + } + + /* Re enable reporting of error interrupts */ + cvmx_write_csr(CVMX_SPXX_INT_REG(interface), + cvmx_read_csr(CVMX_SPXX_INT_REG(interface))); + cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), spxx_int_msk.u64); + cvmx_write_csr(CVMX_STXX_INT_REG(interface), + cvmx_read_csr(CVMX_STXX_INT_REG(interface))); + cvmx_write_csr(CVMX_STXX_INT_MSK(interface), stxx_int_msk.u64); + + /* Setup the CLKDLY right in the middle */ + spxx_clk_ctl.u64 = 0; + spxx_clk_ctl.s.seetrn = 0; + spxx_clk_ctl.s.clkdly = 0x10; + spxx_clk_ctl.s.runbist = 0; + spxx_clk_ctl.s.statdrv = 0; + /* This should always be on the opposite edge as statdrv */ + spxx_clk_ctl.s.statrcv = 1; + spxx_clk_ctl.s.sndtrn = 0; + spxx_clk_ctl.s.drptrn = 0; + spxx_clk_ctl.s.rcvtrn = 0; + spxx_clk_ctl.s.srxdlck = 0; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + __delay(100 * MS); + + /* Reset SRX0 DLL */ + spxx_clk_ctl.s.srxdlck = 1; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + + /* Waiting for Inf0 Spi4 RX DLL to lock */ + __delay(100 * MS); + + /* Enable dynamic alignment */ + spxx_trn4_ctl.s.trntest = 0; + spxx_trn4_ctl.s.jitter = 1; + spxx_trn4_ctl.s.clr_boot = 1; + spxx_trn4_ctl.s.set_boot = 0; + if (OCTEON_IS_MODEL(OCTEON_CN58XX)) + spxx_trn4_ctl.s.maxdist = 3; + else + spxx_trn4_ctl.s.maxdist = 8; + spxx_trn4_ctl.s.macro_en = 1; + spxx_trn4_ctl.s.mux_en = 1; + cvmx_write_csr(CVMX_SPXX_TRN4_CTL(interface), spxx_trn4_ctl.u64); + + spxx_dbg_deskew_ctl.u64 = 0; + cvmx_write_csr(CVMX_SPXX_DBG_DESKEW_CTL(interface), + spxx_dbg_deskew_ctl.u64); + + return 0; +} + +/** + * Callback to setup calendar and miscellaneous settings before clock detection + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @num_ports: Number of ports to configure on SPI + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, + int num_ports) +{ + int port; + int index; + if (mode & CVMX_SPI_MODE_RX_HALFPLEX) { + union cvmx_srxx_com_ctl srxx_com_ctl; + union cvmx_srxx_spi4_stat srxx_spi4_stat; + + /* SRX0 number of Ports */ + srxx_com_ctl.u64 = 0; + srxx_com_ctl.s.prts = num_ports - 1; + srxx_com_ctl.s.st_en = 0; + srxx_com_ctl.s.inf_en = 0; + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64); + + /* SRX0 Calendar Table. This round robbins through all ports */ + port = 0; + index = 0; + while (port < num_ports) { + union cvmx_srxx_spi4_calx srxx_spi4_calx; + srxx_spi4_calx.u64 = 0; + srxx_spi4_calx.s.prt0 = port++; + srxx_spi4_calx.s.prt1 = port++; + srxx_spi4_calx.s.prt2 = port++; + srxx_spi4_calx.s.prt3 = port++; + srxx_spi4_calx.s.oddpar = + ~(cvmx_dpop(srxx_spi4_calx.u64) & 1); + cvmx_write_csr(CVMX_SRXX_SPI4_CALX(index, interface), + srxx_spi4_calx.u64); + index++; + } + srxx_spi4_stat.u64 = 0; + srxx_spi4_stat.s.len = num_ports; + srxx_spi4_stat.s.m = 1; + cvmx_write_csr(CVMX_SRXX_SPI4_STAT(interface), + srxx_spi4_stat.u64); + } + + if (mode & CVMX_SPI_MODE_TX_HALFPLEX) { + union cvmx_stxx_arb_ctl stxx_arb_ctl; + union cvmx_gmxx_tx_spi_max gmxx_tx_spi_max; + union cvmx_gmxx_tx_spi_thresh gmxx_tx_spi_thresh; + union cvmx_gmxx_tx_spi_ctl gmxx_tx_spi_ctl; + union cvmx_stxx_spi4_stat stxx_spi4_stat; + union cvmx_stxx_spi4_dat stxx_spi4_dat; + + /* STX0 Config */ + stxx_arb_ctl.u64 = 0; + stxx_arb_ctl.s.igntpa = 0; + stxx_arb_ctl.s.mintrn = 0; + cvmx_write_csr(CVMX_STXX_ARB_CTL(interface), stxx_arb_ctl.u64); + + gmxx_tx_spi_max.u64 = 0; + gmxx_tx_spi_max.s.max1 = 8; + gmxx_tx_spi_max.s.max2 = 4; + gmxx_tx_spi_max.s.slice = 0; + cvmx_write_csr(CVMX_GMXX_TX_SPI_MAX(interface), + gmxx_tx_spi_max.u64); + + gmxx_tx_spi_thresh.u64 = 0; + gmxx_tx_spi_thresh.s.thresh = 4; + cvmx_write_csr(CVMX_GMXX_TX_SPI_THRESH(interface), + gmxx_tx_spi_thresh.u64); + + gmxx_tx_spi_ctl.u64 = 0; + gmxx_tx_spi_ctl.s.tpa_clr = 0; + gmxx_tx_spi_ctl.s.cont_pkt = 0; + cvmx_write_csr(CVMX_GMXX_TX_SPI_CTL(interface), + gmxx_tx_spi_ctl.u64); + + /* STX0 Training Control */ + stxx_spi4_dat.u64 = 0; + /*Minimum needed by dynamic alignment */ + stxx_spi4_dat.s.alpha = 32; + stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ + cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface), + stxx_spi4_dat.u64); + + /* STX0 Calendar Table. This round robbins through all ports */ + port = 0; + index = 0; + while (port < num_ports) { + union cvmx_stxx_spi4_calx stxx_spi4_calx; + stxx_spi4_calx.u64 = 0; + stxx_spi4_calx.s.prt0 = port++; + stxx_spi4_calx.s.prt1 = port++; + stxx_spi4_calx.s.prt2 = port++; + stxx_spi4_calx.s.prt3 = port++; + stxx_spi4_calx.s.oddpar = + ~(cvmx_dpop(stxx_spi4_calx.u64) & 1); + cvmx_write_csr(CVMX_STXX_SPI4_CALX(index, interface), + stxx_spi4_calx.u64); + index++; + } + stxx_spi4_stat.u64 = 0; + stxx_spi4_stat.s.len = num_ports; + stxx_spi4_stat.s.m = 1; + cvmx_write_csr(CVMX_STXX_SPI4_STAT(interface), + stxx_spi4_stat.u64); + } + + return 0; +} + +/** + * Callback to perform clock detection + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for clock synchronization in seconds + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout) +{ + int clock_transitions; + union cvmx_spxx_clk_stat stat; + uint64_t timeout_time; + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + + /* + * Regardless of operating mode, both Tx and Rx clocks must be + * present for the SPI interface to operate. + */ + cvmx_dprintf("SPI%d: Waiting to see TsClk...\n", interface); + timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + /* + * Require 100 clock transitions in order to avoid any noise + * in the beginning. + */ + clock_transitions = 100; + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (stat.s.s4clk0 && stat.s.s4clk1 && clock_transitions) { + /* + * We've seen a clock transition, so decrement + * the number we still need. + */ + clock_transitions--; + cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64); + stat.s.s4clk0 = 0; + stat.s.s4clk1 = 0; + } + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.s4clk0 == 0 || stat.s.s4clk1 == 0); + + cvmx_dprintf("SPI%d: Waiting to see RsClk...\n", interface); + timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + /* + * Require 100 clock transitions in order to avoid any noise in the + * beginning. + */ + clock_transitions = 100; + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (stat.s.d4clk0 && stat.s.d4clk1 && clock_transitions) { + /* + * We've seen a clock transition, so decrement + * the number we still need + */ + clock_transitions--; + cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64); + stat.s.d4clk0 = 0; + stat.s.d4clk1 = 0; + } + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.d4clk0 == 0 || stat.s.d4clk1 == 0); + + return 0; +} + +/** + * Callback to perform link training + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for link to be trained (in seconds) + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout) +{ + union cvmx_spxx_trn4_ctl spxx_trn4_ctl; + union cvmx_spxx_clk_stat stat; + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + uint64_t timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + int rx_training_needed; + + /* SRX0 & STX0 Inf0 Links are configured - begin training */ + union cvmx_spxx_clk_ctl spxx_clk_ctl; + spxx_clk_ctl.u64 = 0; + spxx_clk_ctl.s.seetrn = 0; + spxx_clk_ctl.s.clkdly = 0x10; + spxx_clk_ctl.s.runbist = 0; + spxx_clk_ctl.s.statdrv = 0; + /* This should always be on the opposite edge as statdrv */ + spxx_clk_ctl.s.statrcv = 1; + spxx_clk_ctl.s.sndtrn = 1; + spxx_clk_ctl.s.drptrn = 1; + spxx_clk_ctl.s.rcvtrn = 1; + spxx_clk_ctl.s.srxdlck = 1; + cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64); + __delay(1000 * MS); + + /* SRX0 clear the boot bit */ + spxx_trn4_ctl.u64 = cvmx_read_csr(CVMX_SPXX_TRN4_CTL(interface)); + spxx_trn4_ctl.s.clr_boot = 1; + cvmx_write_csr(CVMX_SPXX_TRN4_CTL(interface), spxx_trn4_ctl.u64); + + /* Wait for the training sequence to complete */ + cvmx_dprintf("SPI%d: Waiting for training\n", interface); + __delay(1000 * MS); + /* Wait a really long time here */ + timeout_time = cvmx_get_cycle() + 1000ull * MS * 600; + /* + * The HRM says we must wait for 34 + 16 * MAXDIST training sequences. + * We'll be pessimistic and wait for a lot more. + */ + rx_training_needed = 500; + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (stat.s.srxtrn && rx_training_needed) { + rx_training_needed--; + cvmx_write_csr(CVMX_SPXX_CLK_STAT(interface), stat.u64); + stat.s.srxtrn = 0; + } + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.srxtrn == 0); + + return 0; +} + +/** + * Callback to perform calendar data synchronization + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * @timeout: Timeout to wait for calendar data in seconds + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout) +{ + uint64_t MS = cvmx_sysinfo_get()->cpu_clock_hz / 1000; + if (mode & CVMX_SPI_MODE_RX_HALFPLEX) { + /* SRX0 interface should be good, send calendar data */ + union cvmx_srxx_com_ctl srxx_com_ctl; + cvmx_dprintf + ("SPI%d: Rx is synchronized, start sending calendar data\n", + interface); + srxx_com_ctl.u64 = cvmx_read_csr(CVMX_SRXX_COM_CTL(interface)); + srxx_com_ctl.s.inf_en = 1; + srxx_com_ctl.s.st_en = 1; + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64); + } + + if (mode & CVMX_SPI_MODE_TX_HALFPLEX) { + /* STX0 has achieved sync */ + /* The corespondant board should be sending calendar data */ + /* Enable the STX0 STAT receiver. */ + union cvmx_spxx_clk_stat stat; + uint64_t timeout_time; + union cvmx_stxx_com_ctl stxx_com_ctl; + stxx_com_ctl.u64 = 0; + stxx_com_ctl.s.st_en = 1; + cvmx_write_csr(CVMX_STXX_COM_CTL(interface), stxx_com_ctl.u64); + + /* Waiting for calendar sync on STX0 STAT */ + cvmx_dprintf("SPI%d: Waiting to sync on STX[%d] STAT\n", + interface, interface); + timeout_time = cvmx_get_cycle() + 1000ull * MS * timeout; + /* SPX0_CLK_STAT - SPX0_CLK_STAT[STXCAL] should be 1 (bit10) */ + do { + stat.u64 = cvmx_read_csr(CVMX_SPXX_CLK_STAT(interface)); + if (cvmx_get_cycle() > timeout_time) { + cvmx_dprintf("SPI%d: Timeout\n", interface); + return -1; + } + } while (stat.s.stxcal == 0); + } + + return 0; +} + +/** + * Callback to handle interface up + * + * @interface: The identifier of the packet interface to configure and + * use as a SPI interface. + * @mode: The operating mode for the SPI interface. The interface + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). + * + * Returns Zero on success, non-zero error code on failure (will cause + * SPI initialization to abort) + */ +int cvmx_spi_interface_up_cb(int interface, cvmx_spi_mode_t mode) +{ + union cvmx_gmxx_rxx_frm_min gmxx_rxx_frm_min; + union cvmx_gmxx_rxx_frm_max gmxx_rxx_frm_max; + union cvmx_gmxx_rxx_jabber gmxx_rxx_jabber; + + if (mode & CVMX_SPI_MODE_RX_HALFPLEX) { + union cvmx_srxx_com_ctl srxx_com_ctl; + srxx_com_ctl.u64 = cvmx_read_csr(CVMX_SRXX_COM_CTL(interface)); + srxx_com_ctl.s.inf_en = 1; + cvmx_write_csr(CVMX_SRXX_COM_CTL(interface), srxx_com_ctl.u64); + cvmx_dprintf("SPI%d: Rx is now up\n", interface); + } + + if (mode & CVMX_SPI_MODE_TX_HALFPLEX) { + union cvmx_stxx_com_ctl stxx_com_ctl; + stxx_com_ctl.u64 = cvmx_read_csr(CVMX_STXX_COM_CTL(interface)); + stxx_com_ctl.s.inf_en = 1; + cvmx_write_csr(CVMX_STXX_COM_CTL(interface), stxx_com_ctl.u64); + cvmx_dprintf("SPI%d: Tx is now up\n", interface); + } + + gmxx_rxx_frm_min.u64 = 0; + gmxx_rxx_frm_min.s.len = 64; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MIN(0, interface), + gmxx_rxx_frm_min.u64); + gmxx_rxx_frm_max.u64 = 0; + gmxx_rxx_frm_max.s.len = 64 * 1024 - 4; + cvmx_write_csr(CVMX_GMXX_RXX_FRM_MAX(0, interface), + gmxx_rxx_frm_max.u64); + gmxx_rxx_jabber.u64 = 0; + gmxx_rxx_jabber.s.cnt = 64 * 1024 - 4; + cvmx_write_csr(CVMX_GMXX_RXX_JABBER(0, interface), gmxx_rxx_jabber.u64); + + return 0; +} diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c new file mode 100644 index 000000000..30ecba134 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -0,0 +1,53 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * This module provides system/board/application information obtained + * by the bootloader. + */ +#include <linux/export.h> + +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-sysinfo.h> + +/* + * This structure defines the private state maintained by sysinfo module. + */ +static struct cvmx_sysinfo sysinfo; /* system information */ + +/* + * Returns the application information as obtained + * by the bootloader. This provides the core mask of the cores + * running the same application image, as well as the physical + * memory regions available to the core. + */ +struct cvmx_sysinfo *cvmx_sysinfo_get(void) +{ + return &sysinfo; +} +EXPORT_SYMBOL(cvmx_sysinfo_get); + diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c new file mode 100644 index 000000000..657dbad96 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/octeon-model.c @@ -0,0 +1,511 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2017 Cavium, Inc. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +#include <asm/octeon/octeon.h> + +enum octeon_feature_bits __octeon_feature_bits __read_mostly; +EXPORT_SYMBOL_GPL(__octeon_feature_bits); + +/** + * Read a byte of fuse data + * @byte_addr: address to read + * + * Returns fuse value: 0 or 1 + */ +static uint8_t __init cvmx_fuse_read_byte(int byte_addr) +{ + union cvmx_mio_fus_rcmd read_cmd; + + read_cmd.u64 = 0; + read_cmd.s.addr = byte_addr; + read_cmd.s.pend = 1; + cvmx_write_csr(CVMX_MIO_FUS_RCMD, read_cmd.u64); + while ((read_cmd.u64 = cvmx_read_csr(CVMX_MIO_FUS_RCMD)) + && read_cmd.s.pend) + ; + return read_cmd.s.dat; +} + +/* + * Version of octeon_model_get_string() that takes buffer as argument, + * as running early in u-boot static/global variables don't work when + * running from flash. + */ +static const char *__init octeon_model_get_string_buffer(uint32_t chip_id, + char *buffer) +{ + const char *family; + const char *core_model; + char pass[4]; + int clock_mhz; + const char *suffix; + int num_cores; + union cvmx_mio_fus_dat2 fus_dat2; + union cvmx_mio_fus_dat3 fus_dat3; + char fuse_model[10]; + uint32_t fuse_data = 0; + uint64_t l2d_fus3 = 0; + + if (OCTEON_IS_MODEL(OCTEON_CN3XXX) || OCTEON_IS_MODEL(OCTEON_CN5XXX)) + l2d_fus3 = (cvmx_read_csr(CVMX_L2D_FUS3) >> 34) & 0x3; + fus_dat2.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT2); + fus_dat3.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT3); + num_cores = cvmx_octeon_num_cores(); + + /* Make sure the non existent devices look disabled */ + switch ((chip_id >> 8) & 0xff) { + case 6: /* CN50XX */ + case 2: /* CN30XX */ + fus_dat3.s.nodfa_dte = 1; + fus_dat3.s.nozip = 1; + break; + case 4: /* CN57XX or CN56XX */ + fus_dat3.s.nodfa_dte = 1; + break; + default: + break; + } + + /* Make a guess at the suffix */ + /* NSP = everything */ + /* EXP = No crypto */ + /* SCP = No DFA, No zip */ + /* CP = No DFA, No crypto, No zip */ + if (fus_dat3.s.nodfa_dte) { + if (fus_dat2.s.nocrypto) + suffix = "CP"; + else + suffix = "SCP"; + } else if (fus_dat2.s.nocrypto) + suffix = "EXP"; + else + suffix = "NSP"; + + if (!fus_dat2.s.nocrypto) + __octeon_feature_bits |= OCTEON_HAS_CRYPTO; + + /* + * Assume pass number is encoded using <5:3><2:0>. Exceptions + * will be fixed later. + */ + sprintf(pass, "%d.%d", (int)((chip_id >> 3) & 7) + 1, (int)chip_id & 7); + + /* + * Use the number of cores to determine the last 2 digits of + * the model number. There are some exceptions that are fixed + * later. + */ + switch (num_cores) { + case 48: + core_model = "90"; + break; + case 44: + core_model = "88"; + break; + case 40: + core_model = "85"; + break; + case 32: + core_model = "80"; + break; + case 24: + core_model = "70"; + break; + case 16: + core_model = "60"; + break; + case 15: + core_model = "58"; + break; + case 14: + core_model = "55"; + break; + case 13: + core_model = "52"; + break; + case 12: + core_model = "50"; + break; + case 11: + core_model = "48"; + break; + case 10: + core_model = "45"; + break; + case 9: + core_model = "42"; + break; + case 8: + core_model = "40"; + break; + case 7: + core_model = "38"; + break; + case 6: + core_model = "34"; + break; + case 5: + core_model = "32"; + break; + case 4: + core_model = "30"; + break; + case 3: + core_model = "25"; + break; + case 2: + core_model = "20"; + break; + case 1: + core_model = "10"; + break; + default: + core_model = "XX"; + break; + } + + /* Now figure out the family, the first two digits */ + switch ((chip_id >> 8) & 0xff) { + case 0: /* CN38XX, CN37XX or CN36XX */ + if (l2d_fus3) { + /* + * For some unknown reason, the 16 core one is + * called 37 instead of 36. + */ + if (num_cores >= 16) + family = "37"; + else + family = "36"; + } else + family = "38"; + /* + * This series of chips didn't follow the standard + * pass numbering. + */ + switch (chip_id & 0xf) { + case 0: + strcpy(pass, "1.X"); + break; + case 1: + strcpy(pass, "2.X"); + break; + case 3: + strcpy(pass, "3.X"); + break; + default: + strcpy(pass, "X.X"); + break; + } + break; + case 1: /* CN31XX or CN3020 */ + if ((chip_id & 0x10) || l2d_fus3) + family = "30"; + else + family = "31"; + /* + * This series of chips didn't follow the standard + * pass numbering. + */ + switch (chip_id & 0xf) { + case 0: + strcpy(pass, "1.0"); + break; + case 2: + strcpy(pass, "1.1"); + break; + default: + strcpy(pass, "X.X"); + break; + } + break; + case 2: /* CN3010 or CN3005 */ + family = "30"; + /* A chip with half cache is an 05 */ + if (l2d_fus3) + core_model = "05"; + /* + * This series of chips didn't follow the standard + * pass numbering. + */ + switch (chip_id & 0xf) { + case 0: + strcpy(pass, "1.0"); + break; + case 2: + strcpy(pass, "1.1"); + break; + default: + strcpy(pass, "X.X"); + break; + } + break; + case 3: /* CN58XX */ + family = "58"; + /* Special case. 4 core, half cache (CP with half cache) */ + if ((num_cores == 4) && l2d_fus3 && !strncmp(suffix, "CP", 2)) + core_model = "29"; + + /* Pass 1 uses different encodings for pass numbers */ + if ((chip_id & 0xFF) < 0x8) { + switch (chip_id & 0x3) { + case 0: + strcpy(pass, "1.0"); + break; + case 1: + strcpy(pass, "1.1"); + break; + case 3: + strcpy(pass, "1.2"); + break; + default: + strcpy(pass, "1.X"); + break; + } + } + break; + case 4: /* CN57XX, CN56XX, CN55XX, CN54XX */ + if (fus_dat2.cn56xx.raid_en) { + if (l2d_fus3) + family = "55"; + else + family = "57"; + if (fus_dat2.cn56xx.nocrypto) + suffix = "SP"; + else + suffix = "SSP"; + } else { + if (fus_dat2.cn56xx.nocrypto) + suffix = "CP"; + else { + suffix = "NSP"; + if (fus_dat3.s.nozip) + suffix = "SCP"; + + if (fus_dat3.cn38xx.bar2_en) + suffix = "NSPB2"; + } + if (l2d_fus3) + family = "54"; + else + family = "56"; + } + break; + case 6: /* CN50XX */ + family = "50"; + break; + case 7: /* CN52XX */ + if (l2d_fus3) + family = "51"; + else + family = "52"; + break; + case 0x93: /* CN61XX */ + family = "61"; + if (fus_dat2.cn61xx.nocrypto && fus_dat2.cn61xx.dorm_crypto) + suffix = "AP"; + if (fus_dat2.cn61xx.nocrypto) + suffix = "CP"; + else if (fus_dat2.cn61xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn61xx.nozip) + suffix = "SCP"; + break; + case 0x90: /* CN63XX */ + family = "63"; + if (fus_dat3.s.l2c_crip == 2) + family = "62"; + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + if (fus_dat2.cn63xx.nocrypto) + suffix = "CP"; + else if (fus_dat2.cn63xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn61xx.nozip) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x92: /* CN66XX */ + family = "66"; + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + if (fus_dat2.cn66xx.nocrypto && fus_dat2.cn66xx.dorm_crypto) + suffix = "AP"; + if (fus_dat2.cn66xx.nocrypto) + suffix = "CP"; + else if (fus_dat2.cn66xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn61xx.nozip) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x91: /* CN68XX */ + family = "68"; + if (fus_dat2.cn68xx.nocrypto && fus_dat3.cn61xx.nozip) + suffix = "CP"; + else if (fus_dat2.cn68xx.dorm_crypto) + suffix = "DAP"; + else if (fus_dat3.cn61xx.nozip) + suffix = "SCP"; + else if (fus_dat2.cn68xx.nocrypto) + suffix = "SP"; + else + suffix = "AAP"; + break; + case 0x94: /* CNF71XX */ + family = "F71"; + if (fus_dat3.cn61xx.nozip) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x95: /* CN78XX */ + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + if (OCTEON_IS_MODEL(OCTEON_CN76XX)) + family = "76"; + else + family = "78"; + if (fus_dat3.cn78xx.l2c_crip == 2) + family = "77"; + if (fus_dat3.cn78xx.nozip + && fus_dat3.cn78xx.nodfa_dte + && fus_dat3.cn78xx.nohna_dte) { + if (fus_dat3.cn78xx.nozip && + !fus_dat2.cn78xx.raid_en && + fus_dat3.cn78xx.nohna_dte) { + suffix = "CP"; + } else { + suffix = "SCP"; + } + } else if (fus_dat2.cn78xx.raid_en == 0) + suffix = "HCP"; + else + suffix = "AAP"; + break; + case 0x96: /* CN70XX */ + family = "70"; + if (cvmx_read_csr(CVMX_MIO_FUS_PDF) & (0x1ULL << 32)) + family = "71"; + if (fus_dat2.cn70xx.nocrypto) + suffix = "CP"; + else if (fus_dat3.cn70xx.nodfa_dte) + suffix = "SCP"; + else + suffix = "AAP"; + break; + case 0x97: /* CN73XX */ + if (num_cores == 6) /* Other core counts match generic */ + core_model = "35"; + family = "73"; + if (fus_dat3.cn73xx.l2c_crip == 2) + family = "72"; + if (fus_dat3.cn73xx.nozip + && fus_dat3.cn73xx.nodfa_dte + && fus_dat3.cn73xx.nohna_dte) { + if (!fus_dat2.cn73xx.raid_en) + suffix = "CP"; + else + suffix = "SCP"; + } else + suffix = "AAP"; + break; + case 0x98: /* CN75XX */ + family = "F75"; + if (fus_dat3.cn78xx.nozip + && fus_dat3.cn78xx.nodfa_dte + && fus_dat3.cn78xx.nohna_dte) + suffix = "SCP"; + else + suffix = "AAP"; + break; + default: + family = "XX"; + core_model = "XX"; + strcpy(pass, "X.X"); + suffix = "XXX"; + break; + } + + clock_mhz = octeon_get_clock_rate() / 1000000; + if (family[0] != '3') { + int fuse_base = 384 / 8; + if (family[0] == '6') + fuse_base = 832 / 8; + + /* Check for model in fuses, overrides normal decode */ + /* This is _not_ valid for Octeon CN3XXX models */ + fuse_data |= cvmx_fuse_read_byte(fuse_base + 3); + fuse_data = fuse_data << 8; + fuse_data |= cvmx_fuse_read_byte(fuse_base + 2); + fuse_data = fuse_data << 8; + fuse_data |= cvmx_fuse_read_byte(fuse_base + 1); + fuse_data = fuse_data << 8; + fuse_data |= cvmx_fuse_read_byte(fuse_base); + if (fuse_data & 0x7ffff) { + int model = fuse_data & 0x3fff; + int suffix = (fuse_data >> 14) & 0x1f; + if (suffix && model) { + /* Have both number and suffix in fuses, so both */ + sprintf(fuse_model, "%d%c", model, 'A' + suffix - 1); + core_model = ""; + family = fuse_model; + } else if (suffix && !model) { + /* Only have suffix, so add suffix to 'normal' model number */ + sprintf(fuse_model, "%s%c", core_model, 'A' + suffix - 1); + core_model = fuse_model; + } else { + /* Don't have suffix, so just use model from fuses */ + sprintf(fuse_model, "%d", model); + core_model = ""; + family = fuse_model; + } + } + } + sprintf(buffer, "CN%s%sp%s-%d-%s", family, core_model, pass, clock_mhz, suffix); + return buffer; +} + +/** + * Given the chip processor ID from COP0, this function returns a + * string representing the chip model number. The string is of the + * form CNXXXXpX.X-FREQ-SUFFIX. + * - XXXX = The chip model number + * - X.X = Chip pass number + * - FREQ = Current frequency in Mhz + * - SUFFIX = NSP, EXP, SCP, SSP, or CP + * + * @chip_id: Chip ID + * + * Returns Model string + */ +const char *__init octeon_model_get_string(uint32_t chip_id) +{ + static char buffer[32]; + return octeon_model_get_string_buffer(chip_id, buffer); +} |