diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/include/asm/mach-ar7/ar7.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h new file mode 100644 index 000000000..dd09c3bf0 --- /dev/null +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006,2007 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006,2007 Eugene Konev <ejka@openwrt.org> + */ + +#ifndef __AR7_H__ +#define __AR7_H__ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/errno.h> + +#include <asm/addrspace.h> + +#define AR7_SDRAM_BASE 0x14000000 + +#define AR7_REGS_BASE 0x08610000 + +#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) +#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) +/* 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) */ +#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) +#define AR7_REGS_CLOCKS (AR7_REGS_POWER + 0x80) +#define UR8_REGS_CLOCKS (AR7_REGS_POWER + 0x20) +#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) +#define AR7_REGS_USB (AR7_REGS_BASE + 0x1200) +#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) +#define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C) +#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) +#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00) +#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00) +#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00) +#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) + +#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) +#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) +#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) + +/* Titan registers */ +#define TITAN_REGS_ESWITCH_BASE (0x08640000) +#define TITAN_REGS_MAC0 (TITAN_REGS_ESWITCH_BASE) +#define TITAN_REGS_MAC1 (TITAN_REGS_ESWITCH_BASE + 0x0800) +#define TITAN_REGS_MDIO (TITAN_REGS_ESWITCH_BASE + 0x02000) +#define TITAN_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1c00) +#define TITAN_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1300) + +#define AR7_RESET_PERIPHERAL 0x0 +#define AR7_RESET_SOFTWARE 0x4 +#define AR7_RESET_STATUS 0x8 + +#define AR7_RESET_BIT_CPMAC_LO 17 +#define AR7_RESET_BIT_CPMAC_HI 21 +#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_EPHY 26 + +#define TITAN_RESET_BIT_EPHY1 28 + +/* GPIO control registers */ +#define AR7_GPIO_INPUT 0x0 +#define AR7_GPIO_OUTPUT 0x4 +#define AR7_GPIO_DIR 0x8 +#define AR7_GPIO_ENABLE 0xc +#define TITAN_GPIO_INPUT_0 0x0 +#define TITAN_GPIO_INPUT_1 0x4 +#define TITAN_GPIO_OUTPUT_0 0x8 +#define TITAN_GPIO_OUTPUT_1 0xc +#define TITAN_GPIO_DIR_0 0x10 +#define TITAN_GPIO_DIR_1 0x14 +#define TITAN_GPIO_ENBL_0 0x18 +#define TITAN_GPIO_ENBL_1 0x1c + +#define AR7_CHIP_7100 0x18 +#define AR7_CHIP_7200 0x2b +#define AR7_CHIP_7300 0x05 +#define AR7_CHIP_TITAN 0x07 +#define TITAN_CHIP_1050 0x0f +#define TITAN_CHIP_1055 0x0e +#define TITAN_CHIP_1056 0x0d +#define TITAN_CHIP_1060 0x07 + +/* Interrupts */ +#define AR7_IRQ_UART0 15 +#define AR7_IRQ_UART1 16 + +/* Clocks */ +#define AR7_AFE_CLOCK 35328000 +#define AR7_REF_CLOCK 25000000 +#define AR7_XTAL_CLOCK 24000000 + +/* DCL */ +#define AR7_WDT_HW_ENA 0x10 + +struct plat_cpmac_data { + int reset_bit; + int power_bit; + u32 phy_mask; + char dev_addr[6]; +}; + +struct plat_dsl_data { + int reset_bit_dsl; + int reset_bit_sar; +}; + +extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; + +static inline int ar7_is_titan(void) +{ + return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == + AR7_CHIP_TITAN; +} + +static inline u16 ar7_chip_id(void) +{ + return ar7_is_titan() ? AR7_CHIP_TITAN : (readl((void *) + KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff); +} + +static inline u16 titan_chip_id(void) +{ + unsigned int val = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + + TITAN_GPIO_INPUT_1)); + return ((val >> 12) & 0x0f); +} + +static inline u8 ar7_chip_rev(void) +{ + return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + (ar7_is_titan() ? 0x24 : + 0x14))) >> 16) & 0xff; +} + +struct clk { + unsigned int rate; +}; + +static inline int ar7_has_high_cpmac(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + return 0; + case AR7_CHIP_7300: + return 1; + default: + return -ENXIO; + } +} +#define ar7_has_high_vlynq ar7_has_high_cpmac +#define ar7_has_second_uart ar7_has_high_cpmac + +static inline void ar7_device_enable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); + writel(readl(reset_reg) | (1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_disable(u32 bit) +{ + void *reset_reg = + (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL); + writel(readl(reset_reg) & ~(1 << bit), reset_reg); + msleep(20); +} + +static inline void ar7_device_reset(u32 bit) +{ + ar7_device_disable(bit); + ar7_device_enable(bit); +} + +static inline void ar7_device_on(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) | (1 << bit), power_reg); + msleep(20); +} + +static inline void ar7_device_off(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) & ~(1 << bit), power_reg); + msleep(20); +} + +int __init ar7_gpio_init(void); +void __init ar7_init_clocks(void); + +/* Board specific GPIO functions */ +int ar7_gpio_enable(unsigned gpio); +int ar7_gpio_disable(unsigned gpio); + +#endif /* __AR7_H__ */ |