diff options
Diffstat (limited to '')
118 files changed, 40297 insertions, 0 deletions
diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore new file mode 100644 index 000000000..bbb90f92d --- /dev/null +++ b/arch/mips/kernel/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +vmlinux.lds diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile new file mode 100644 index 000000000..2a05b923f --- /dev/null +++ b/arch/mips/kernel/Makefile @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the Linux/MIPS kernel. +# + +extra-y := head.o vmlinux.lds + +obj-y += branch.o cmpxchg.o elf.o entry.o genex.o idle.o irq.o \ + process.o prom.o ptrace.o reset.o setup.o signal.o \ + syscall.o time.o topology.o traps.o unaligned.o watch.o \ + vdso.o cacheinfo.o + +ifdef CONFIG_CPU_R3K_TLB +obj-y += cpu-r3k-probe.o +else +obj-y += cpu-probe.o +endif + +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_early_printk.o = -pg +CFLAGS_REMOVE_perf_event.o = -pg +CFLAGS_REMOVE_perf_event_mipsxx.o = -pg +endif + +obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o +obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o +obj-$(CONFIG_CEVT_DS1287) += cevt-ds1287.o +obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o +obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o +obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o +obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o +obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o +obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o +obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o +obj-$(CONFIG_SYNC_R4K) += sync-r4k.o + +obj-$(CONFIG_DEBUG_FS) += segment.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-$(CONFIG_MODULES) += module.o + +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o +obj-$(CONFIG_FUNCTION_TRACER) += mcount.o ftrace.o + +sw-y := r4k_switch.o +sw-$(CONFIG_CPU_R3000) := r2300_switch.o +sw-$(CONFIG_CPU_TX39XX) := r2300_switch.o +sw-$(CONFIG_CPU_CAVIUM_OCTEON) := octeon_switch.o +obj-y += $(sw-y) + +obj-$(CONFIG_MIPS_FP_SUPPORT) += fpu-probe.o +obj-$(CONFIG_CPU_R2300_FPU) += r2300_fpu.o +obj-$(CONFIG_CPU_R4K_FPU) += r4k_fpu.o + +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_SMP_UP) += smp-up.o +obj-$(CONFIG_CPU_BMIPS) += smp-bmips.o bmips_vec.o bmips_5xxx_init.o + +obj-$(CONFIG_MIPS_MT) += mips-mt.o +obj-$(CONFIG_MIPS_MT_FPAFF) += mips-mt-fpaff.o +obj-$(CONFIG_MIPS_MT_SMP) += smp-mt.o +obj-$(CONFIG_MIPS_CMP) += smp-cmp.o +obj-$(CONFIG_MIPS_CPS) += smp-cps.o cps-vec.o +obj-$(CONFIG_MIPS_CPS_NS16550) += cps-vec-ns16550.o +obj-$(CONFIG_MIPS_SPRAM) += spram.o + +obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o +obj-$(CONFIG_MIPS_VPE_LOADER_CMP) += vpe-cmp.o +obj-$(CONFIG_MIPS_VPE_LOADER_MT) += vpe-mt.o +obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o +obj-$(CONFIG_MIPS_VPE_APSP_API_CMP) += rtlx-cmp.o +obj-$(CONFIG_MIPS_VPE_APSP_API_MT) += rtlx-mt.o + +obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o +obj-$(CONFIG_MIPS_MSC) += irq-msc01.o +obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o +obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o + +obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_32BIT) += scall32-o32.o +obj-$(CONFIG_64BIT) += scall64-n64.o +obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o +obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o +obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o signal_o32.o + +obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_PROC_FS) += proc.o +obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o + +obj-$(CONFIG_CPU_R4X00_BUGS64) += r4k-bugs64.o + +obj-$(CONFIG_I8253) += i8253.o + +obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o + +obj-$(CONFIG_RELOCATABLE) += relocate.o + +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_EARLY_PRINTK_8250) += early_printk_8250.o +obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o +obj-$(CONFIG_MIPSR2_TO_R6_EMULATOR) += mips-r2-to-r6-emul.o + +CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -x c /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) + +obj-$(CONFIG_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o + +obj-$(CONFIG_JUMP_LABEL) += jump_label.o +obj-$(CONFIG_UPROBES) += uprobes.o + +obj-$(CONFIG_MIPS_CM) += mips-cm.o +obj-$(CONFIG_MIPS_CPC) += mips-cpc.o + +obj-$(CONFIG_CPU_PM) += pm.o +obj-$(CONFIG_MIPS_CPS_PM) += pm-cps.o + +CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS) diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c new file mode 100644 index 000000000..aebfda811 --- /dev/null +++ b/arch/mips/kernel/asm-offsets.c @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * asm-offsets.c: Calculate pt_regs and task_struct offsets. + * + * Copyright (C) 1996 David S. Miller + * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2003 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * + * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. + */ +#include <linux/compat.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/kbuild.h> +#include <linux/suspend.h> +#include <asm/cpu-info.h> +#include <asm/pm.h> +#include <asm/ptrace.h> +#include <asm/processor.h> +#include <asm/smp-cps.h> + +#include <linux/kvm_host.h> + +void output_ptreg_defines(void) +{ + COMMENT("MIPS pt_regs offsets."); + OFFSET(PT_R0, pt_regs, regs[0]); + OFFSET(PT_R1, pt_regs, regs[1]); + OFFSET(PT_R2, pt_regs, regs[2]); + OFFSET(PT_R3, pt_regs, regs[3]); + OFFSET(PT_R4, pt_regs, regs[4]); + OFFSET(PT_R5, pt_regs, regs[5]); + OFFSET(PT_R6, pt_regs, regs[6]); + OFFSET(PT_R7, pt_regs, regs[7]); + OFFSET(PT_R8, pt_regs, regs[8]); + OFFSET(PT_R9, pt_regs, regs[9]); + OFFSET(PT_R10, pt_regs, regs[10]); + OFFSET(PT_R11, pt_regs, regs[11]); + OFFSET(PT_R12, pt_regs, regs[12]); + OFFSET(PT_R13, pt_regs, regs[13]); + OFFSET(PT_R14, pt_regs, regs[14]); + OFFSET(PT_R15, pt_regs, regs[15]); + OFFSET(PT_R16, pt_regs, regs[16]); + OFFSET(PT_R17, pt_regs, regs[17]); + OFFSET(PT_R18, pt_regs, regs[18]); + OFFSET(PT_R19, pt_regs, regs[19]); + OFFSET(PT_R20, pt_regs, regs[20]); + OFFSET(PT_R21, pt_regs, regs[21]); + OFFSET(PT_R22, pt_regs, regs[22]); + OFFSET(PT_R23, pt_regs, regs[23]); + OFFSET(PT_R24, pt_regs, regs[24]); + OFFSET(PT_R25, pt_regs, regs[25]); + OFFSET(PT_R26, pt_regs, regs[26]); + OFFSET(PT_R27, pt_regs, regs[27]); + OFFSET(PT_R28, pt_regs, regs[28]); + OFFSET(PT_R29, pt_regs, regs[29]); + OFFSET(PT_R30, pt_regs, regs[30]); + OFFSET(PT_R31, pt_regs, regs[31]); + OFFSET(PT_LO, pt_regs, lo); + OFFSET(PT_HI, pt_regs, hi); +#ifdef CONFIG_CPU_HAS_SMARTMIPS + OFFSET(PT_ACX, pt_regs, acx); +#endif + OFFSET(PT_EPC, pt_regs, cp0_epc); + OFFSET(PT_BVADDR, pt_regs, cp0_badvaddr); + OFFSET(PT_STATUS, pt_regs, cp0_status); + OFFSET(PT_CAUSE, pt_regs, cp0_cause); +#ifdef CONFIG_CPU_CAVIUM_OCTEON + OFFSET(PT_MPL, pt_regs, mpl); + OFFSET(PT_MTP, pt_regs, mtp); +#endif /* CONFIG_CPU_CAVIUM_OCTEON */ + DEFINE(PT_SIZE, sizeof(struct pt_regs)); + BLANK(); +} + +void output_task_defines(void) +{ + COMMENT("MIPS task_struct offsets."); + OFFSET(TASK_STATE, task_struct, state); + OFFSET(TASK_THREAD_INFO, task_struct, stack); + OFFSET(TASK_FLAGS, task_struct, flags); + OFFSET(TASK_MM, task_struct, mm); + OFFSET(TASK_PID, task_struct, pid); +#if defined(CONFIG_STACKPROTECTOR) + OFFSET(TASK_STACK_CANARY, task_struct, stack_canary); +#endif + DEFINE(TASK_STRUCT_SIZE, sizeof(struct task_struct)); + BLANK(); +} + +void output_thread_info_defines(void) +{ + COMMENT("MIPS thread_info offsets."); + OFFSET(TI_TASK, thread_info, task); + OFFSET(TI_FLAGS, thread_info, flags); + OFFSET(TI_TP_VALUE, thread_info, tp_value); + OFFSET(TI_CPU, thread_info, cpu); + OFFSET(TI_PRE_COUNT, thread_info, preempt_count); + OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit); + OFFSET(TI_REGS, thread_info, regs); + DEFINE(_THREAD_SIZE, THREAD_SIZE); + DEFINE(_THREAD_MASK, THREAD_MASK); + DEFINE(_IRQ_STACK_SIZE, IRQ_STACK_SIZE); + DEFINE(_IRQ_STACK_START, IRQ_STACK_START); + BLANK(); +} + +void output_thread_defines(void) +{ + COMMENT("MIPS specific thread_struct offsets."); + OFFSET(THREAD_REG16, task_struct, thread.reg16); + OFFSET(THREAD_REG17, task_struct, thread.reg17); + OFFSET(THREAD_REG18, task_struct, thread.reg18); + OFFSET(THREAD_REG19, task_struct, thread.reg19); + OFFSET(THREAD_REG20, task_struct, thread.reg20); + OFFSET(THREAD_REG21, task_struct, thread.reg21); + OFFSET(THREAD_REG22, task_struct, thread.reg22); + OFFSET(THREAD_REG23, task_struct, thread.reg23); + OFFSET(THREAD_REG29, task_struct, thread.reg29); + OFFSET(THREAD_REG30, task_struct, thread.reg30); + OFFSET(THREAD_REG31, task_struct, thread.reg31); + OFFSET(THREAD_STATUS, task_struct, + thread.cp0_status); + + OFFSET(THREAD_BVADDR, task_struct, \ + thread.cp0_badvaddr); + OFFSET(THREAD_BUADDR, task_struct, \ + thread.cp0_baduaddr); + OFFSET(THREAD_ECODE, task_struct, \ + thread.error_code); + OFFSET(THREAD_TRAPNO, task_struct, thread.trap_nr); + BLANK(); +} + +#ifdef CONFIG_MIPS_FP_SUPPORT +void output_thread_fpu_defines(void) +{ + OFFSET(THREAD_FPU, task_struct, thread.fpu); + + OFFSET(THREAD_FPR0, task_struct, thread.fpu.fpr[0]); + OFFSET(THREAD_FPR1, task_struct, thread.fpu.fpr[1]); + OFFSET(THREAD_FPR2, task_struct, thread.fpu.fpr[2]); + OFFSET(THREAD_FPR3, task_struct, thread.fpu.fpr[3]); + OFFSET(THREAD_FPR4, task_struct, thread.fpu.fpr[4]); + OFFSET(THREAD_FPR5, task_struct, thread.fpu.fpr[5]); + OFFSET(THREAD_FPR6, task_struct, thread.fpu.fpr[6]); + OFFSET(THREAD_FPR7, task_struct, thread.fpu.fpr[7]); + OFFSET(THREAD_FPR8, task_struct, thread.fpu.fpr[8]); + OFFSET(THREAD_FPR9, task_struct, thread.fpu.fpr[9]); + OFFSET(THREAD_FPR10, task_struct, thread.fpu.fpr[10]); + OFFSET(THREAD_FPR11, task_struct, thread.fpu.fpr[11]); + OFFSET(THREAD_FPR12, task_struct, thread.fpu.fpr[12]); + OFFSET(THREAD_FPR13, task_struct, thread.fpu.fpr[13]); + OFFSET(THREAD_FPR14, task_struct, thread.fpu.fpr[14]); + OFFSET(THREAD_FPR15, task_struct, thread.fpu.fpr[15]); + OFFSET(THREAD_FPR16, task_struct, thread.fpu.fpr[16]); + OFFSET(THREAD_FPR17, task_struct, thread.fpu.fpr[17]); + OFFSET(THREAD_FPR18, task_struct, thread.fpu.fpr[18]); + OFFSET(THREAD_FPR19, task_struct, thread.fpu.fpr[19]); + OFFSET(THREAD_FPR20, task_struct, thread.fpu.fpr[20]); + OFFSET(THREAD_FPR21, task_struct, thread.fpu.fpr[21]); + OFFSET(THREAD_FPR22, task_struct, thread.fpu.fpr[22]); + OFFSET(THREAD_FPR23, task_struct, thread.fpu.fpr[23]); + OFFSET(THREAD_FPR24, task_struct, thread.fpu.fpr[24]); + OFFSET(THREAD_FPR25, task_struct, thread.fpu.fpr[25]); + OFFSET(THREAD_FPR26, task_struct, thread.fpu.fpr[26]); + OFFSET(THREAD_FPR27, task_struct, thread.fpu.fpr[27]); + OFFSET(THREAD_FPR28, task_struct, thread.fpu.fpr[28]); + OFFSET(THREAD_FPR29, task_struct, thread.fpu.fpr[29]); + OFFSET(THREAD_FPR30, task_struct, thread.fpu.fpr[30]); + OFFSET(THREAD_FPR31, task_struct, thread.fpu.fpr[31]); + + OFFSET(THREAD_FCR31, task_struct, thread.fpu.fcr31); + OFFSET(THREAD_MSA_CSR, task_struct, thread.fpu.msacsr); + BLANK(); +} +#endif + +void output_mm_defines(void) +{ + COMMENT("Size of struct page"); + DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page)); + BLANK(); + COMMENT("Linux mm_struct offsets."); + OFFSET(MM_USERS, mm_struct, mm_users); + OFFSET(MM_PGD, mm_struct, pgd); + OFFSET(MM_CONTEXT, mm_struct, context); + BLANK(); + DEFINE(_PGD_T_SIZE, sizeof(pgd_t)); + DEFINE(_PMD_T_SIZE, sizeof(pmd_t)); + DEFINE(_PTE_T_SIZE, sizeof(pte_t)); + BLANK(); + DEFINE(_PGD_T_LOG2, PGD_T_LOG2); +#ifndef __PAGETABLE_PMD_FOLDED + DEFINE(_PMD_T_LOG2, PMD_T_LOG2); +#endif + DEFINE(_PTE_T_LOG2, PTE_T_LOG2); + BLANK(); + DEFINE(_PGD_ORDER, PGD_ORDER); +#ifndef __PAGETABLE_PMD_FOLDED + DEFINE(_PMD_ORDER, PMD_ORDER); +#endif + DEFINE(_PTE_ORDER, PTE_ORDER); + BLANK(); + DEFINE(_PMD_SHIFT, PMD_SHIFT); + DEFINE(_PGDIR_SHIFT, PGDIR_SHIFT); + BLANK(); + DEFINE(_PTRS_PER_PGD, PTRS_PER_PGD); + DEFINE(_PTRS_PER_PMD, PTRS_PER_PMD); + DEFINE(_PTRS_PER_PTE, PTRS_PER_PTE); + BLANK(); + DEFINE(_PAGE_SHIFT, PAGE_SHIFT); + DEFINE(_PAGE_SIZE, PAGE_SIZE); + BLANK(); +} + +#ifdef CONFIG_32BIT +void output_sc_defines(void) +{ + COMMENT("Linux sigcontext offsets."); + OFFSET(SC_REGS, sigcontext, sc_regs); + OFFSET(SC_FPREGS, sigcontext, sc_fpregs); + OFFSET(SC_ACX, sigcontext, sc_acx); + OFFSET(SC_MDHI, sigcontext, sc_mdhi); + OFFSET(SC_MDLO, sigcontext, sc_mdlo); + OFFSET(SC_PC, sigcontext, sc_pc); + OFFSET(SC_FPC_CSR, sigcontext, sc_fpc_csr); + OFFSET(SC_FPC_EIR, sigcontext, sc_fpc_eir); + OFFSET(SC_HI1, sigcontext, sc_hi1); + OFFSET(SC_LO1, sigcontext, sc_lo1); + OFFSET(SC_HI2, sigcontext, sc_hi2); + OFFSET(SC_LO2, sigcontext, sc_lo2); + OFFSET(SC_HI3, sigcontext, sc_hi3); + OFFSET(SC_LO3, sigcontext, sc_lo3); + BLANK(); +} +#endif + +#ifdef CONFIG_64BIT +void output_sc_defines(void) +{ + COMMENT("Linux sigcontext offsets."); + OFFSET(SC_REGS, sigcontext, sc_regs); + OFFSET(SC_FPREGS, sigcontext, sc_fpregs); + OFFSET(SC_MDHI, sigcontext, sc_mdhi); + OFFSET(SC_MDLO, sigcontext, sc_mdlo); + OFFSET(SC_PC, sigcontext, sc_pc); + OFFSET(SC_FPC_CSR, sigcontext, sc_fpc_csr); + BLANK(); +} +#endif + +void output_signal_defined(void) +{ + COMMENT("Linux signal numbers."); + DEFINE(_SIGHUP, SIGHUP); + DEFINE(_SIGINT, SIGINT); + DEFINE(_SIGQUIT, SIGQUIT); + DEFINE(_SIGILL, SIGILL); + DEFINE(_SIGTRAP, SIGTRAP); + DEFINE(_SIGIOT, SIGIOT); + DEFINE(_SIGABRT, SIGABRT); + DEFINE(_SIGEMT, SIGEMT); + DEFINE(_SIGFPE, SIGFPE); + DEFINE(_SIGKILL, SIGKILL); + DEFINE(_SIGBUS, SIGBUS); + DEFINE(_SIGSEGV, SIGSEGV); + DEFINE(_SIGSYS, SIGSYS); + DEFINE(_SIGPIPE, SIGPIPE); + DEFINE(_SIGALRM, SIGALRM); + DEFINE(_SIGTERM, SIGTERM); + DEFINE(_SIGUSR1, SIGUSR1); + DEFINE(_SIGUSR2, SIGUSR2); + DEFINE(_SIGCHLD, SIGCHLD); + DEFINE(_SIGPWR, SIGPWR); + DEFINE(_SIGWINCH, SIGWINCH); + DEFINE(_SIGURG, SIGURG); + DEFINE(_SIGIO, SIGIO); + DEFINE(_SIGSTOP, SIGSTOP); + DEFINE(_SIGTSTP, SIGTSTP); + DEFINE(_SIGCONT, SIGCONT); + DEFINE(_SIGTTIN, SIGTTIN); + DEFINE(_SIGTTOU, SIGTTOU); + DEFINE(_SIGVTALRM, SIGVTALRM); + DEFINE(_SIGPROF, SIGPROF); + DEFINE(_SIGXCPU, SIGXCPU); + DEFINE(_SIGXFSZ, SIGXFSZ); + BLANK(); +} + +#ifdef CONFIG_CPU_CAVIUM_OCTEON +void output_octeon_cop2_state_defines(void) +{ + COMMENT("Octeon specific octeon_cop2_state offsets."); + OFFSET(OCTEON_CP2_CRC_IV, octeon_cop2_state, cop2_crc_iv); + OFFSET(OCTEON_CP2_CRC_LENGTH, octeon_cop2_state, cop2_crc_length); + OFFSET(OCTEON_CP2_CRC_POLY, octeon_cop2_state, cop2_crc_poly); + OFFSET(OCTEON_CP2_LLM_DAT, octeon_cop2_state, cop2_llm_dat); + OFFSET(OCTEON_CP2_3DES_IV, octeon_cop2_state, cop2_3des_iv); + OFFSET(OCTEON_CP2_3DES_KEY, octeon_cop2_state, cop2_3des_key); + OFFSET(OCTEON_CP2_3DES_RESULT, octeon_cop2_state, cop2_3des_result); + OFFSET(OCTEON_CP2_AES_INP0, octeon_cop2_state, cop2_aes_inp0); + OFFSET(OCTEON_CP2_AES_IV, octeon_cop2_state, cop2_aes_iv); + OFFSET(OCTEON_CP2_AES_KEY, octeon_cop2_state, cop2_aes_key); + OFFSET(OCTEON_CP2_AES_KEYLEN, octeon_cop2_state, cop2_aes_keylen); + OFFSET(OCTEON_CP2_AES_RESULT, octeon_cop2_state, cop2_aes_result); + OFFSET(OCTEON_CP2_GFM_MULT, octeon_cop2_state, cop2_gfm_mult); + OFFSET(OCTEON_CP2_GFM_POLY, octeon_cop2_state, cop2_gfm_poly); + OFFSET(OCTEON_CP2_GFM_RESULT, octeon_cop2_state, cop2_gfm_result); + OFFSET(OCTEON_CP2_HSH_DATW, octeon_cop2_state, cop2_hsh_datw); + OFFSET(OCTEON_CP2_HSH_IVW, octeon_cop2_state, cop2_hsh_ivw); + OFFSET(OCTEON_CP2_SHA3, octeon_cop2_state, cop2_sha3); + OFFSET(THREAD_CP2, task_struct, thread.cp2); + OFFSET(THREAD_CVMSEG, task_struct, thread.cvmseg.cvmseg); + BLANK(); +} +#endif + +#ifdef CONFIG_HIBERNATION +void output_pbe_defines(void) +{ + COMMENT(" Linux struct pbe offsets. "); + OFFSET(PBE_ADDRESS, pbe, address); + OFFSET(PBE_ORIG_ADDRESS, pbe, orig_address); + OFFSET(PBE_NEXT, pbe, next); + DEFINE(PBE_SIZE, sizeof(struct pbe)); + BLANK(); +} +#endif + +#ifdef CONFIG_CPU_PM +void output_pm_defines(void) +{ + COMMENT(" PM offsets. "); +#ifdef CONFIG_EVA + OFFSET(SSS_SEGCTL0, mips_static_suspend_state, segctl[0]); + OFFSET(SSS_SEGCTL1, mips_static_suspend_state, segctl[1]); + OFFSET(SSS_SEGCTL2, mips_static_suspend_state, segctl[2]); +#endif + OFFSET(SSS_SP, mips_static_suspend_state, sp); + BLANK(); +} +#endif + +#ifdef CONFIG_MIPS_FP_SUPPORT +void output_kvm_defines(void) +{ + COMMENT(" KVM/MIPS Specific offsets. "); + + OFFSET(VCPU_FPR0, kvm_vcpu_arch, fpu.fpr[0]); + OFFSET(VCPU_FPR1, kvm_vcpu_arch, fpu.fpr[1]); + OFFSET(VCPU_FPR2, kvm_vcpu_arch, fpu.fpr[2]); + OFFSET(VCPU_FPR3, kvm_vcpu_arch, fpu.fpr[3]); + OFFSET(VCPU_FPR4, kvm_vcpu_arch, fpu.fpr[4]); + OFFSET(VCPU_FPR5, kvm_vcpu_arch, fpu.fpr[5]); + OFFSET(VCPU_FPR6, kvm_vcpu_arch, fpu.fpr[6]); + OFFSET(VCPU_FPR7, kvm_vcpu_arch, fpu.fpr[7]); + OFFSET(VCPU_FPR8, kvm_vcpu_arch, fpu.fpr[8]); + OFFSET(VCPU_FPR9, kvm_vcpu_arch, fpu.fpr[9]); + OFFSET(VCPU_FPR10, kvm_vcpu_arch, fpu.fpr[10]); + OFFSET(VCPU_FPR11, kvm_vcpu_arch, fpu.fpr[11]); + OFFSET(VCPU_FPR12, kvm_vcpu_arch, fpu.fpr[12]); + OFFSET(VCPU_FPR13, kvm_vcpu_arch, fpu.fpr[13]); + OFFSET(VCPU_FPR14, kvm_vcpu_arch, fpu.fpr[14]); + OFFSET(VCPU_FPR15, kvm_vcpu_arch, fpu.fpr[15]); + OFFSET(VCPU_FPR16, kvm_vcpu_arch, fpu.fpr[16]); + OFFSET(VCPU_FPR17, kvm_vcpu_arch, fpu.fpr[17]); + OFFSET(VCPU_FPR18, kvm_vcpu_arch, fpu.fpr[18]); + OFFSET(VCPU_FPR19, kvm_vcpu_arch, fpu.fpr[19]); + OFFSET(VCPU_FPR20, kvm_vcpu_arch, fpu.fpr[20]); + OFFSET(VCPU_FPR21, kvm_vcpu_arch, fpu.fpr[21]); + OFFSET(VCPU_FPR22, kvm_vcpu_arch, fpu.fpr[22]); + OFFSET(VCPU_FPR23, kvm_vcpu_arch, fpu.fpr[23]); + OFFSET(VCPU_FPR24, kvm_vcpu_arch, fpu.fpr[24]); + OFFSET(VCPU_FPR25, kvm_vcpu_arch, fpu.fpr[25]); + OFFSET(VCPU_FPR26, kvm_vcpu_arch, fpu.fpr[26]); + OFFSET(VCPU_FPR27, kvm_vcpu_arch, fpu.fpr[27]); + OFFSET(VCPU_FPR28, kvm_vcpu_arch, fpu.fpr[28]); + OFFSET(VCPU_FPR29, kvm_vcpu_arch, fpu.fpr[29]); + OFFSET(VCPU_FPR30, kvm_vcpu_arch, fpu.fpr[30]); + OFFSET(VCPU_FPR31, kvm_vcpu_arch, fpu.fpr[31]); + + OFFSET(VCPU_FCR31, kvm_vcpu_arch, fpu.fcr31); + OFFSET(VCPU_MSA_CSR, kvm_vcpu_arch, fpu.msacsr); + BLANK(); +} +#endif + +#ifdef CONFIG_MIPS_CPS +void output_cps_defines(void) +{ + COMMENT(" MIPS CPS offsets. "); + + OFFSET(COREBOOTCFG_VPEMASK, core_boot_config, vpe_mask); + OFFSET(COREBOOTCFG_VPECONFIG, core_boot_config, vpe_config); + DEFINE(COREBOOTCFG_SIZE, sizeof(struct core_boot_config)); + + OFFSET(VPEBOOTCFG_PC, vpe_boot_config, pc); + OFFSET(VPEBOOTCFG_SP, vpe_boot_config, sp); + OFFSET(VPEBOOTCFG_GP, vpe_boot_config, gp); + DEFINE(VPEBOOTCFG_SIZE, sizeof(struct vpe_boot_config)); +} +#endif diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c new file mode 100644 index 000000000..c4441416e --- /dev/null +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -0,0 +1,113 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for n32 Linux/MIPS ELF binaries. + * Author: Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 1999, 2001 Ralf Baechle + * Copyright (C) 1999, 2001 Silicon Graphics, Inc. + * + * Heavily inspired by the 32-bit Sparc compat code which is + * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com) + * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz) + */ + +#define ELF_ARCH EM_MIPS +#define ELF_CLASS ELFCLASS32 +#ifdef __MIPSEB__ +#define ELF_DATA ELFDATA2MSB; +#else /* __MIPSEL__ */ +#define ELF_DATA ELFDATA2LSB; +#endif + +/* ELF register definitions */ +#define ELF_NGREG 45 +#define ELF_NFPREG 33 + +typedef unsigned long elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch elfn32_check_arch + +#define TASK32_SIZE 0x7fff8000UL +#undef ELF_ET_DYN_BASE +#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) + +#include <asm/processor.h> +#include <linux/elfcore.h> +#include <linux/compat.h> +#include <linux/math64.h> + +#define elf_prstatus elf_prstatus32 +struct elf_prstatus32 +{ + struct elf_siginfo pr_info; /* Info associated with signal */ + short pr_cursig; /* Current signal */ + unsigned int pr_sigpend; /* Set of pending signals */ + unsigned int pr_sighold; /* Set of held signals */ + pid_t pr_pid; + pid_t pr_ppid; + pid_t pr_pgrp; + pid_t pr_sid; + struct old_timeval32 pr_utime; /* User time */ + struct old_timeval32 pr_stime; /* System time */ + struct old_timeval32 pr_cutime;/* Cumulative user time */ + struct old_timeval32 pr_cstime;/* Cumulative system time */ + elf_gregset_t pr_reg; /* GP registers */ + int pr_fpvalid; /* True if math co-processor being used. */ +}; + +#define elf_prpsinfo elf_prpsinfo32 +struct elf_prpsinfo32 +{ + char pr_state; /* numeric process state */ + char pr_sname; /* char for pr_state */ + char pr_zomb; /* zombie */ + char pr_nice; /* nice val */ + unsigned int pr_flag; /* flags */ + __kernel_uid_t pr_uid; + __kernel_gid_t pr_gid; + pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; + /* Lots missing */ + char pr_fname[16]; /* filename of executable */ + char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ +}; + +#define elf_caddr_t u32 +#define init_elf_binfmt init_elfn32_binfmt + +#define jiffies_to_timeval jiffies_to_old_timeval32 +static __inline__ void +jiffies_to_old_timeval32(unsigned long jiffies, struct old_timeval32 *value) +{ + /* + * Convert jiffies to nanoseconds and separate with + * one divide. + */ + u64 nsec = (u64)jiffies * TICK_NSEC; + u32 rem; + value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem); + value->tv_usec = rem / NSEC_PER_USEC; +} + +#define ELF_CORE_EFLAGS EF_MIPS_ABI2 + +#undef TASK_SIZE +#define TASK_SIZE TASK_SIZE32 + +#undef ns_to_kernel_old_timeval +#define ns_to_kernel_old_timeval ns_to_old_timeval32 + +/* + * Some data types as stored in coredump. + */ +#define user_long_t compat_long_t +#define user_siginfo_t compat_siginfo_t +#define copy_siginfo_to_external copy_siginfo_to_external32 + +#include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c new file mode 100644 index 000000000..7b2a23f48 --- /dev/null +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support for o32 Linux/MIPS ELF binaries. + * Author: Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 1999, 2001 Ralf Baechle + * Copyright (C) 1999, 2001 Silicon Graphics, Inc. + * + * Heavily inspired by the 32-bit Sparc compat code which is + * Copyright (C) 1995, 1996, 1997, 1998 David S. Miller (davem@redhat.com) + * Copyright (C) 1995, 1996, 1997, 1998 Jakub Jelinek (jj@ultra.linux.cz) + */ + +#define ELF_ARCH EM_MIPS +#define ELF_CLASS ELFCLASS32 +#ifdef __MIPSEB__ +#define ELF_DATA ELFDATA2MSB; +#else /* __MIPSEL__ */ +#define ELF_DATA ELFDATA2LSB; +#endif + +/* ELF register definitions */ +#define ELF_NGREG 45 +#define ELF_NFPREG 33 + +typedef unsigned int elf_greg_t; +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef double elf_fpreg_t; +typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch elfo32_check_arch + +#ifdef CONFIG_KVM_GUEST +#define TASK32_SIZE 0x3fff8000UL +#else +#define TASK32_SIZE 0x7fff8000UL +#endif +#undef ELF_ET_DYN_BASE +#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2) + +#include <asm/processor.h> + +#include <linux/elfcore.h> +#include <linux/compat.h> +#include <linux/math64.h> + +#define elf_prstatus elf_prstatus32 +struct elf_prstatus32 +{ + struct elf_siginfo pr_info; /* Info associated with signal */ + short pr_cursig; /* Current signal */ + unsigned int pr_sigpend; /* Set of pending signals */ + unsigned int pr_sighold; /* Set of held signals */ + pid_t pr_pid; + pid_t pr_ppid; + pid_t pr_pgrp; + pid_t pr_sid; + struct old_timeval32 pr_utime; /* User time */ + struct old_timeval32 pr_stime; /* System time */ + struct old_timeval32 pr_cutime;/* Cumulative user time */ + struct old_timeval32 pr_cstime;/* Cumulative system time */ + elf_gregset_t pr_reg; /* GP registers */ + int pr_fpvalid; /* True if math co-processor being used. */ +}; + +#define elf_prpsinfo elf_prpsinfo32 +struct elf_prpsinfo32 +{ + char pr_state; /* numeric process state */ + char pr_sname; /* char for pr_state */ + char pr_zomb; /* zombie */ + char pr_nice; /* nice val */ + unsigned int pr_flag; /* flags */ + __kernel_uid_t pr_uid; + __kernel_gid_t pr_gid; + pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; + /* Lots missing */ + char pr_fname[16]; /* filename of executable */ + char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ +}; + +#define elf_caddr_t u32 +#define init_elf_binfmt init_elf32_binfmt + +#define jiffies_to_timeval jiffies_to_old_timeval32 +static inline void +jiffies_to_old_timeval32(unsigned long jiffies, struct old_timeval32 *value) +{ + /* + * Convert jiffies to nanoseconds and separate with + * one divide. + */ + u64 nsec = (u64)jiffies * TICK_NSEC; + u32 rem; + value->tv_sec = div_u64_rem(nsec, NSEC_PER_SEC, &rem); + value->tv_usec = rem / NSEC_PER_USEC; +} + +#undef TASK_SIZE +#define TASK_SIZE TASK_SIZE32 + +#undef ns_to_kernel_old_timeval +#define ns_to_kernel_old_timeval ns_to_old_timeval32 + +/* + * Some data types as stored in coredump. + */ +#define user_long_t compat_long_t +#define user_siginfo_t compat_siginfo_t +#define copy_siginfo_to_external copy_siginfo_to_external32 + +#include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/kernel/bmips_5xxx_init.S b/arch/mips/kernel/bmips_5xxx_init.S new file mode 100644 index 000000000..9e422d186 --- /dev/null +++ b/arch/mips/kernel/bmips_5xxx_init.S @@ -0,0 +1,747 @@ + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011-2012 by Broadcom Corporation + * + * Init for bmips 5000. + * Used to init second core in dual core 5000's. + */ + +#include <linux/init.h> + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/addrspace.h> +#include <asm/hazards.h> +#include <asm/bmips.h> + +#ifdef CONFIG_CPU_BMIPS5000 + + +#define cacheop(kva, size, linesize, op) \ + .set noreorder ; \ + addu t1, kva, size ; \ + subu t2, linesize, 1 ; \ + not t2 ; \ + and t0, kva, t2 ; \ + addiu t1, t1, -1 ; \ + and t1, t2 ; \ +9: cache op, 0(t0) ; \ + bne t0, t1, 9b ; \ + addu t0, linesize ; \ + .set reorder ; + + + +#define IS_SHIFT 22 +#define IL_SHIFT 19 +#define IA_SHIFT 16 +#define DS_SHIFT 13 +#define DL_SHIFT 10 +#define DA_SHIFT 7 +#define IS_MASK 7 +#define IL_MASK 7 +#define IA_MASK 7 +#define DS_MASK 7 +#define DL_MASK 7 +#define DA_MASK 7 +#define ICE_MASK 0x80000000 +#define DCE_MASK 0x40000000 + +#define CP0_BRCM_CONFIG0 $22, 0 +#define CP0_BRCM_MODE $22, 1 +#define CP0_CONFIG_K0_MASK 7 + +#define CP0_ICACHE_TAG_LO $28 +#define CP0_ICACHE_DATA_LO $28, 1 +#define CP0_DCACHE_TAG_LO $28, 2 +#define CP0_D_SEC_CACHE_DATA_LO $28, 3 +#define CP0_ICACHE_TAG_HI $29 +#define CP0_ICACHE_DATA_HI $29, 1 +#define CP0_DCACHE_TAG_HI $29, 2 + +#define CP0_BRCM_MODE_Luc_MASK (1 << 11) +#define CP0_BRCM_CONFIG0_CWF_MASK (1 << 20) +#define CP0_BRCM_CONFIG0_TSE_MASK (1 << 19) +#define CP0_BRCM_MODE_SET_MASK (1 << 7) +#define CP0_BRCM_MODE_ClkRATIO_MASK (7 << 4) +#define CP0_BRCM_MODE_BrPRED_MASK (3 << 24) +#define CP0_BRCM_MODE_BrPRED_SHIFT 24 +#define CP0_BRCM_MODE_BrHIST_MASK (0x1f << 20) +#define CP0_BRCM_MODE_BrHIST_SHIFT 20 + +/* ZSC L2 Cache Register Access Register Definitions */ +#define BRCM_ZSC_ALL_REGS_SELECT 0x7 << 24 + +#define BRCM_ZSC_CONFIG_REG 0 << 3 +#define BRCM_ZSC_REQ_BUFFER_REG 2 << 3 +#define BRCM_ZSC_RBUS_ADDR_MAPPING_REG0 4 << 3 +#define BRCM_ZSC_RBUS_ADDR_MAPPING_REG1 6 << 3 +#define BRCM_ZSC_RBUS_ADDR_MAPPING_REG2 8 << 3 + +#define BRCM_ZSC_SCB0_ADDR_MAPPING_REG0 0xa << 3 +#define BRCM_ZSC_SCB0_ADDR_MAPPING_REG1 0xc << 3 + +#define BRCM_ZSC_SCB1_ADDR_MAPPING_REG0 0xe << 3 +#define BRCM_ZSC_SCB1_ADDR_MAPPING_REG1 0x10 << 3 + +#define BRCM_ZSC_CONFIG_LMB1En 1 << (15) +#define BRCM_ZSC_CONFIG_LMB0En 1 << (14) + +/* branch predition values */ + +#define BRCM_BrPRED_ALL_TAKEN (0x0) +#define BRCM_BrPRED_ALL_NOT_TAKEN (0x1) +#define BRCM_BrPRED_BHT_ENABLE (0x2) +#define BRCM_BrPRED_PREDICT_BACKWARD (0x3) + + + +.align 2 +/* + * Function: size_i_cache + * Arguments: None + * Returns: v0 = i cache size, v1 = I cache line size + * Description: compute the I-cache size and I-cache line size + * Trashes: v0, v1, a0, t0 + * + * pseudo code: + * + */ + +LEAF(size_i_cache) + .set noreorder + + mfc0 a0, CP0_CONFIG, 1 + move t0, a0 + + /* + * Determine sets per way: IS + * + * This field contains the number of sets (i.e., indices) per way of + * the instruction cache: + * i) 0x0: 64, ii) 0x1: 128, iii) 0x2: 256, iv) 0x3: 512, v) 0x4: 1k + * vi) 0x5 - 0x7: Reserved. + */ + + srl a0, a0, IS_SHIFT + and a0, a0, IS_MASK + + /* sets per way = (64<<IS) */ + + li v0, 0x40 + sllv v0, v0, a0 + + /* + * Determine line size + * + * This field contains the line size of the instruction cache: + * i) 0x0: No I-cache present, i) 0x3: 16 bytes, ii) 0x4: 32 bytes, iii) + * 0x5: 64 bytes, iv) the rest: Reserved. + */ + + move a0, t0 + + srl a0, a0, IL_SHIFT + and a0, a0, IL_MASK + + beqz a0, no_i_cache + nop + + /* line size = 2 ^ (IL+1) */ + + addi a0, a0, 1 + li v1, 1 + sll v1, v1, a0 + + /* v0 now have sets per way, multiply it by line size now + * that will give the set size + */ + + sll v0, v0, a0 + + /* + * Determine set associativity + * + * This field contains the set associativity of the instruction cache. + * i) 0x0: Direct mapped, ii) 0x1: 2-way, iii) 0x2: 3-way, iv) 0x3: + * 4-way, v) 0x4 - 0x7: Reserved. + */ + + move a0, t0 + + srl a0, a0, IA_SHIFT + and a0, a0, IA_MASK + addi a0, a0, 0x1 + + /* v0 has the set size, multiply it by + * set associativiy, to get the cache size + */ + + multu v0, a0 /*multu is interlocked, so no need to insert nops */ + mflo v0 + b 1f + nop + +no_i_cache: + move v0, zero + move v1, zero +1: + jr ra + nop + .set reorder + +END(size_i_cache) + +/* + * Function: size_d_cache + * Arguments: None + * Returns: v0 = d cache size, v1 = d cache line size + * Description: compute the D-cache size and D-cache line size. + * Trashes: v0, v1, a0, t0 + * + */ + +LEAF(size_d_cache) + .set noreorder + + mfc0 a0, CP0_CONFIG, 1 + move t0, a0 + + /* + * Determine sets per way: IS + * + * This field contains the number of sets (i.e., indices) per way of + * the instruction cache: + * i) 0x0: 64, ii) 0x1: 128, iii) 0x2: 256, iv) 0x3: 512, v) 0x4: 1k + * vi) 0x5 - 0x7: Reserved. + */ + + srl a0, a0, DS_SHIFT + and a0, a0, DS_MASK + + /* sets per way = (64<<IS) */ + + li v0, 0x40 + sllv v0, v0, a0 + + /* + * Determine line size + * + * This field contains the line size of the instruction cache: + * i) 0x0: No I-cache present, i) 0x3: 16 bytes, ii) 0x4: 32 bytes, iii) + * 0x5: 64 bytes, iv) the rest: Reserved. + */ + move a0, t0 + + srl a0, a0, DL_SHIFT + and a0, a0, DL_MASK + + beqz a0, no_d_cache + nop + + /* line size = 2 ^ (IL+1) */ + + addi a0, a0, 1 + li v1, 1 + sll v1, v1, a0 + + /* v0 now have sets per way, multiply it by line size now + * that will give the set size + */ + + sll v0, v0, a0 + + /* determine set associativity + * + * This field contains the set associativity of the instruction cache. + * i) 0x0: Direct mapped, ii) 0x1: 2-way, iii) 0x2: 3-way, iv) 0x3: + * 4-way, v) 0x4 - 0x7: Reserved. + */ + + move a0, t0 + + srl a0, a0, DA_SHIFT + and a0, a0, DA_MASK + addi a0, a0, 0x1 + + /* v0 has the set size, multiply it by + * set associativiy, to get the cache size + */ + + multu v0, a0 /*multu is interlocked, so no need to insert nops */ + mflo v0 + + b 1f + nop + +no_d_cache: + move v0, zero + move v1, zero +1: + jr ra + nop + .set reorder + +END(size_d_cache) + + +/* + * Function: enable_ID + * Arguments: None + * Returns: None + * Description: Enable I and D caches, initialize I and D-caches, also set + * hardware delay for d-cache (TP0). + * Trashes: t0 + * + */ + .global enable_ID + .ent enable_ID + .set noreorder +enable_ID: + mfc0 t0, CP0_BRCM_CONFIG0 + or t0, t0, (ICE_MASK | DCE_MASK) + mtc0 t0, CP0_BRCM_CONFIG0 + jr ra + nop + + .end enable_ID + .set reorder + + +/* + * Function: l1_init + * Arguments: None + * Returns: None + * Description: Enable I and D caches, and initialize I and D-caches + * Trashes: a0, v0, v1, t0, t1, t2, t8 + * + */ + .globl l1_init + .ent l1_init + .set noreorder +l1_init: + + /* save return address */ + move t8, ra + + + /* initialize I and D cache Data and Tag registers. */ + mtc0 zero, CP0_ICACHE_TAG_LO + mtc0 zero, CP0_ICACHE_TAG_HI + mtc0 zero, CP0_ICACHE_DATA_LO + mtc0 zero, CP0_ICACHE_DATA_HI + mtc0 zero, CP0_DCACHE_TAG_LO + mtc0 zero, CP0_DCACHE_TAG_HI + + /* Enable Caches before Clearing. If the caches are disabled + * then the cache operations to clear the cache will be ignored + */ + + jal enable_ID + nop + + jal size_i_cache /* v0 = i-cache size, v1 = i-cache line size */ + nop + + /* run uncached in kseg 1 */ + la k0, 1f + lui k1, 0x2000 + or k0, k1, k0 + jr k0 + nop +1: + + /* + * set K0 cache mode + */ + + mfc0 t0, CP0_CONFIG + and t0, t0, ~CP0_CONFIG_K0_MASK + or t0, t0, 3 /* Write Back mode */ + mtc0 t0, CP0_CONFIG + + /* + * Initialize instruction cache. + */ + + li a0, KSEG0 + cacheop(a0, v0, v1, Index_Store_Tag_I) + + /* + * Now we can run from I-$, kseg 0 + */ + la k0, 1f + lui k1, 0x2000 + or k0, k1, k0 + xor k0, k1, k0 + jr k0 + nop +1: + /* + * Initialize data cache. + */ + + jal size_d_cache /* v0 = d-cache size, v1 = d-cache line size */ + nop + + + li a0, KSEG0 + cacheop(a0, v0, v1, Index_Store_Tag_D) + + jr t8 + nop + + .end l1_init + .set reorder + + +/* + * Function: set_other_config + * Arguments: none + * Returns: None + * Description: initialize other remainder configuration to defaults. + * Trashes: t0, t1 + * + * pseudo code: + * + */ +LEAF(set_other_config) + .set noreorder + + /* enable Bus error for I-fetch */ + mfc0 t0, CP0_CACHEERR, 0 + li t1, 0x4 + or t0, t1 + mtc0 t0, CP0_CACHEERR, 0 + + /* enable Bus error for Load */ + mfc0 t0, CP0_CACHEERR, 1 + li t1, 0x4 + or t0, t1 + mtc0 t0, CP0_CACHEERR, 1 + + /* enable Bus Error for Store */ + mfc0 t0, CP0_CACHEERR, 2 + li t1, 0x4 + or t0, t1 + mtc0 t0, CP0_CACHEERR, 2 + + jr ra + nop + .set reorder +END(set_other_config) + +/* + * Function: set_branch_pred + * Arguments: none + * Returns: None + * Description: + * Trashes: t0, t1 + * + * pseudo code: + * + */ + +LEAF(set_branch_pred) + .set noreorder + mfc0 t0, CP0_BRCM_MODE + li t1, ~(CP0_BRCM_MODE_BrPRED_MASK | CP0_BRCM_MODE_BrHIST_MASK ) + and t0, t0, t1 + + /* enable Branch prediction */ + li t1, BRCM_BrPRED_BHT_ENABLE + sll t1, CP0_BRCM_MODE_BrPRED_SHIFT + or t0, t0, t1 + + /* set history count to 8 */ + li t1, 8 + sll t1, CP0_BRCM_MODE_BrHIST_SHIFT + or t0, t0, t1 + + mtc0 t0, CP0_BRCM_MODE + jr ra + nop + .set reorder +END(set_branch_pred) + + +/* + * Function: set_luc + * Arguments: set link uncached. + * Returns: None + * Description: + * Trashes: t0, t1 + * + */ +LEAF(set_luc) + .set noreorder + mfc0 t0, CP0_BRCM_MODE + li t1, ~(CP0_BRCM_MODE_Luc_MASK) + and t0, t0, t1 + + /* set Luc */ + ori t0, t0, CP0_BRCM_MODE_Luc_MASK + + mtc0 t0, CP0_BRCM_MODE + jr ra + nop + .set reorder +END(set_luc) + +/* + * Function: set_cwf_tse + * Arguments: set CWF and TSE bits + * Returns: None + * Description: + * Trashes: t0, t1 + * + */ +LEAF(set_cwf_tse) + .set noreorder + mfc0 t0, CP0_BRCM_CONFIG0 + li t1, (CP0_BRCM_CONFIG0_CWF_MASK | CP0_BRCM_CONFIG0_TSE_MASK) + or t0, t0, t1 + + mtc0 t0, CP0_BRCM_CONFIG0 + jr ra + nop + .set reorder +END(set_cwf_tse) + +/* + * Function: set_clock_ratio + * Arguments: set clock ratio specified by a0 + * Returns: None + * Description: + * Trashes: v0, v1, a0, a1 + * + * pseudo code: + * + */ +LEAF(set_clock_ratio) + .set noreorder + + mfc0 t0, CP0_BRCM_MODE + li t1, ~(CP0_BRCM_MODE_SET_MASK | CP0_BRCM_MODE_ClkRATIO_MASK) + and t0, t0, t1 + li t1, CP0_BRCM_MODE_SET_MASK + or t0, t0, t1 + or t0, t0, a0 + mtc0 t0, CP0_BRCM_MODE + jr ra + nop + .set reorder +END(set_clock_ratio) +/* + * Function: set_zephyr + * Arguments: None + * Returns: None + * Description: Set any zephyr bits + * Trashes: t0 & t1 + * + */ +LEAF(set_zephyr) + .set noreorder + + /* enable read/write of CP0 #22 sel. 8 */ + li t0, 0x5a455048 + .word 0x4088b00f /* mtc0 t0, $22, 15 */ + + .word 0x4008b008 /* mfc0 t0, $22, 8 */ + li t1, 0x09008000 /* turn off pref, jtb */ + or t0, t0, t1 + .word 0x4088b008 /* mtc0 t0, $22, 8 */ + sync + + /* disable read/write of CP0 #22 sel 8 */ + li t0, 0x0 + .word 0x4088b00f /* mtc0 t0, $22, 15 */ + + + jr ra + nop + .set reorder + +END(set_zephyr) + + +/* + * Function: set_llmb + * Arguments: a0=0 disable llmb, a0=1 enables llmb + * Returns: None + * Description: + * Trashes: t0, t1, t2 + * + * pseudo code: + * + */ +LEAF(set_llmb) + .set noreorder + + li t2, 0x90000000 | BRCM_ZSC_ALL_REGS_SELECT | BRCM_ZSC_CONFIG_REG + sync + cache 0x7, 0x0(t2) + sync + mfc0 t0, CP0_D_SEC_CACHE_DATA_LO + li t1, ~(BRCM_ZSC_CONFIG_LMB1En | BRCM_ZSC_CONFIG_LMB0En) + and t0, t0, t1 + + beqz a0, svlmb + nop + +enable_lmb: + li t1, (BRCM_ZSC_CONFIG_LMB1En | BRCM_ZSC_CONFIG_LMB0En) + or t0, t0, t1 + +svlmb: + mtc0 t0, CP0_D_SEC_CACHE_DATA_LO + sync + cache 0xb, 0x0(t2) + sync + + jr ra + nop + .set reorder + +END(set_llmb) +/* + * Function: core_init + * Arguments: none + * Returns: None + * Description: initialize core related configuration + * Trashes: v0,v1,a0,a1,t8 + * + * pseudo code: + * + */ + .globl core_init + .ent core_init + .set noreorder +core_init: + move t8, ra + + /* set Zephyr bits. */ + bal set_zephyr + nop + + /* set low latency memory bus */ + li a0, 1 + bal set_llmb + nop + + /* set branch prediction (TP0 only) */ + bal set_branch_pred + nop + + /* set link uncached */ + bal set_luc + nop + + /* set CWF and TSE */ + bal set_cwf_tse + nop + + /* + *set clock ratio by setting 1 to 'set' + * and 0 to ClkRatio, (TP0 only) + */ + li a0, 0 + bal set_clock_ratio + nop + + /* set other configuration to defaults */ + bal set_other_config + nop + + move ra, t8 + jr ra + nop + + .set reorder + .end core_init + +/* + * Function: clear_jump_target_buffer + * Arguments: None + * Returns: None + * Description: + * Trashes: t0, t1, t2 + * + */ +#define RESET_CALL_RETURN_STACK_THIS_THREAD (0x06<<16) +#define RESET_JUMP_TARGET_BUFFER_THIS_THREAD (0x04<<16) +#define JTB_CS_CNTL_MASK (0xFF<<16) + + .globl clear_jump_target_buffer + .ent clear_jump_target_buffer + .set noreorder +clear_jump_target_buffer: + + mfc0 t0, $22, 2 + nop + nop + + li t1, ~JTB_CS_CNTL_MASK + and t0, t0, t1 + li t2, RESET_CALL_RETURN_STACK_THIS_THREAD + or t0, t0, t2 + mtc0 t0, $22, 2 + nop + nop + + and t0, t0, t1 + li t2, RESET_JUMP_TARGET_BUFFER_THIS_THREAD + or t0, t0, t2 + mtc0 t0, $22, 2 + nop + nop + jr ra + nop + + .end clear_jump_target_buffer + .set reorder +/* + * Function: bmips_cache_init + * Arguments: None + * Returns: None + * Description: Enable I and D caches, and initialize I and D-caches + * Trashes: v0, v1, t0, t1, t2, t5, t7, t8 + * + */ + .globl bmips_5xxx_init + .ent bmips_5xxx_init + .set noreorder +bmips_5xxx_init: + + /* save return address and A0 */ + move t7, ra + move t5, a0 + + jal l1_init + nop + + jal core_init + nop + + jal clear_jump_target_buffer + nop + + mtc0 zero, CP0_CAUSE + + move a0, t5 + jr t7 + nop + + .end bmips_5xxx_init + .set reorder + + +#endif diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S new file mode 100644 index 000000000..921a5fa55 --- /dev/null +++ b/arch/mips/kernel/bmips_vec.S @@ -0,0 +1,322 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * Reset/NMI/re-entry vectors for BMIPS processors + */ + + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/cpu.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/addrspace.h> +#include <asm/hazards.h> +#include <asm/bmips.h> + + .macro BARRIER + .set mips32 + _ssnop + _ssnop + _ssnop + .set mips0 + .endm + +/*********************************************************************** + * Alternate CPU1 startup vector for BMIPS4350 + * + * On some systems the bootloader has already started CPU1 and configured + * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is + * triggered by the SW1 interrupt. If that is the case we try to move + * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380. + ***********************************************************************/ + +LEAF(bmips_smp_movevec) + la k0, 1f + li k1, CKSEG1 + or k0, k1 + jr k0 + +1: + /* clear IV, pending IPIs */ + mtc0 zero, CP0_CAUSE + + /* re-enable IRQs to wait for SW1 */ + li k0, ST0_IE | ST0_BEV | STATUSF_IP1 + mtc0 k0, CP0_STATUS + + /* set up CPU1 CBR; move BASE to 0xa000_0000 */ + li k0, 0xff400000 + mtc0 k0, $22, 6 + /* set up relocation vector address based on thread ID */ + mfc0 k1, $22, 3 + srl k1, 16 + andi k1, 0x8000 + or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0 + or k0, k1 + li k1, 0xa0080000 + sw k1, 0(k0) + + /* wait here for SW1 interrupt from bmips_boot_secondary() */ + wait + + la k0, bmips_reset_nmi_vec + li k1, CKSEG1 + or k0, k1 + jr k0 +END(bmips_smp_movevec) + +/*********************************************************************** + * Reset/NMI vector + * For BMIPS processors that can relocate their exception vectors, this + * entire function gets copied to 0x8000_0000. + ***********************************************************************/ + +NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) + .set push + .set noat + .align 4 + +#ifdef CONFIG_SMP + /* if the NMI bit is clear, assume this is a CPU1 reset instead */ + li k1, (1 << 19) + mfc0 k0, CP0_STATUS + and k0, k1 + beqz k0, soft_reset + +#if defined(CONFIG_CPU_BMIPS5000) + mfc0 k0, CP0_PRID + li k1, PRID_IMP_BMIPS5000 + /* mask with PRID_IMP_BMIPS5000 to cover both variants */ + andi k0, PRID_IMP_BMIPS5000 + bne k0, k1, 1f + + /* if we're not on core 0, this must be the SMP boot signal */ + li k1, (3 << 25) + mfc0 k0, $22 + and k0, k1 + bnez k0, bmips_smp_entry +1: +#endif /* CONFIG_CPU_BMIPS5000 */ +#endif /* CONFIG_SMP */ + + /* nope, it's just a regular NMI */ + SAVE_ALL + move a0, sp + + /* clear EXL, ERL, BEV so that TLB refills still work */ + mfc0 k0, CP0_STATUS + li k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE + or k0, k1 + xor k0, k1 + mtc0 k0, CP0_STATUS + BARRIER + + /* jump to the NMI handler function */ + la k0, nmi_handler + jr k0 + + RESTORE_ALL + .set arch=r4000 + eret + +#ifdef CONFIG_SMP +soft_reset: + +#if defined(CONFIG_CPU_BMIPS5000) + mfc0 k0, CP0_PRID + andi k0, 0xff00 + li k1, PRID_IMP_BMIPS5200 + bne k0, k1, bmips_smp_entry + + /* if running on TP 1, jump to bmips_smp_entry */ + mfc0 k0, $22 + li k1, (1 << 24) + and k1, k0 + bnez k1, bmips_smp_entry + nop + + /* + * running on TP0, can not be core 0 (the boot core). + * Check for soft reset. Indicates a warm boot + */ + mfc0 k0, $12 + li k1, (1 << 20) + and k0, k1 + beqz k0, bmips_smp_entry + + /* + * Warm boot. + * Cache init is only done on TP0 + */ + la k0, bmips_5xxx_init + jalr k0 + nop + + b bmips_smp_entry + nop +#endif + +/*********************************************************************** + * CPU1 reset vector (used for the initial boot only) + * This is still part of bmips_reset_nmi_vec(). + ***********************************************************************/ + +bmips_smp_entry: + + /* set up CP0 STATUS; enable FPU */ + li k0, 0x30000000 + mtc0 k0, CP0_STATUS + BARRIER + + /* set local CP0 CONFIG to make kseg0 cacheable, write-back */ + mfc0 k0, CP0_CONFIG + ori k0, 0x07 + xori k0, 0x04 + mtc0 k0, CP0_CONFIG + + mfc0 k0, CP0_PRID + andi k0, 0xff00 +#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) + li k1, PRID_IMP_BMIPS43XX + bne k0, k1, 2f + + /* initialize CPU1's local I-cache */ + li k0, 0x80000000 + li k1, 0x80010000 + mtc0 zero, $28 + mtc0 zero, $28, 1 + BARRIER + +1: cache Index_Store_Tag_I, 0(k0) + addiu k0, 16 + bne k0, k1, 1b + + b 3f +2: +#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */ +#if defined(CONFIG_CPU_BMIPS5000) + /* mask with PRID_IMP_BMIPS5000 to cover both variants */ + li k1, PRID_IMP_BMIPS5000 + andi k0, PRID_IMP_BMIPS5000 + bne k0, k1, 3f + + /* set exception vector base */ + la k0, ebase + lw k0, 0(k0) + mtc0 k0, $15, 1 + BARRIER +#endif /* CONFIG_CPU_BMIPS5000 */ +3: + /* jump back to kseg0 in case we need to remap the kseg1 area */ + la k0, 1f + jr k0 +1: + la k0, bmips_enable_xks01 + jalr k0 + + /* use temporary stack to set up upper memory TLB */ + li sp, BMIPS_WARM_RESTART_VEC + la k0, plat_wired_tlb_setup + jalr k0 + + /* switch to permanent stack and continue booting */ + + .global bmips_secondary_reentry +bmips_secondary_reentry: + la k0, bmips_smp_boot_sp + lw sp, 0(k0) + la k0, bmips_smp_boot_gp + lw gp, 0(k0) + la k0, start_secondary + jr k0 + +#endif /* CONFIG_SMP */ + + .align 4 + .global bmips_reset_nmi_vec_end +bmips_reset_nmi_vec_end: + +END(bmips_reset_nmi_vec) + + .set pop + +/*********************************************************************** + * CPU1 warm restart vector (used for second and subsequent boots). + * Also used for S2 standby recovery (PM). + * This entire function gets copied to (BMIPS_WARM_RESTART_VEC) + ***********************************************************************/ + +LEAF(bmips_smp_int_vec) + + .align 4 + mfc0 k0, CP0_STATUS + ori k0, 0x01 + xori k0, 0x01 + mtc0 k0, CP0_STATUS + eret + + .align 4 + .global bmips_smp_int_vec_end +bmips_smp_int_vec_end: + +END(bmips_smp_int_vec) + +/*********************************************************************** + * XKS01 support + * Certain CPUs support extending kseg0 to 1024MB. + ***********************************************************************/ + +LEAF(bmips_enable_xks01) + +#if defined(CONFIG_XKS01) + mfc0 t0, CP0_PRID + andi t2, t0, 0xff00 +#if defined(CONFIG_CPU_BMIPS4380) + li t1, PRID_IMP_BMIPS43XX + bne t2, t1, 1f + + andi t0, 0xff + addiu t1, t0, -PRID_REV_BMIPS4380_HI + bgtz t1, 2f + addiu t0, -PRID_REV_BMIPS4380_LO + bltz t0, 2f + + mfc0 t0, $22, 3 + li t1, 0x1ff0 + li t2, (1 << 12) | (1 << 9) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 3 + BARRIER + b 2f +1: +#endif /* CONFIG_CPU_BMIPS4380 */ +#if defined(CONFIG_CPU_BMIPS5000) + li t1, PRID_IMP_BMIPS5000 + /* mask with PRID_IMP_BMIPS5000 to cover both variants */ + andi t2, PRID_IMP_BMIPS5000 + bne t2, t1, 2f + + mfc0 t0, $22, 5 + li t1, 0x01ff + li t2, (1 << 8) | (1 << 5) + or t0, t1 + xor t0, t1 + or t0, t2 + mtc0 t0, $22, 5 + BARRIER +#endif /* CONFIG_CPU_BMIPS5000 */ +2: +#endif /* defined(CONFIG_XKS01) */ + + jr ra + +END(bmips_enable_xks01) diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c new file mode 100644 index 000000000..0216ff24c --- /dev/null +++ b/arch/mips/kernel/branch.c @@ -0,0 +1,908 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 2000, 2001 by Ralf Baechle + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#include <linux/kernel.h> +#include <linux/sched/signal.h> +#include <linux/signal.h> +#include <linux/export.h> +#include <asm/branch.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/fpu.h> +#include <asm/fpu_emulator.h> +#include <asm/inst.h> +#include <asm/mips-r2-to-r6-emul.h> +#include <asm/ptrace.h> +#include <linux/uaccess.h> + +#include "probes-common.h" + +/* + * Calculate and return exception PC in case of branch delay slot + * for microMIPS and MIPS16e. It does not clear the ISA mode bit. + */ +int __isa_exception_epc(struct pt_regs *regs) +{ + unsigned short inst; + long epc = regs->cp0_epc; + + /* Calculate exception PC in branch delay slot. */ + if (__get_user(inst, (u16 __user *) msk_isa16_mode(epc))) { + /* This should never happen because delay slot was checked. */ + force_sig(SIGSEGV); + return epc; + } + if (cpu_has_mips16) { + union mips16e_instruction inst_mips16e; + + inst_mips16e.full = inst; + if (inst_mips16e.ri.opcode == MIPS16e_jal_op) + epc += 4; + else + epc += 2; + } else if (mm_insn_16bit(inst)) + epc += 2; + else + epc += 4; + + return epc; +} + +/* (microMIPS) Convert 16-bit register encoding to 32-bit register encoding. */ +static const unsigned int reg16to32map[8] = {16, 17, 2, 3, 4, 5, 6, 7}; + +int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, + unsigned long *contpc) +{ + union mips_instruction insn = (union mips_instruction)dec_insn.insn; + int __maybe_unused bc_false = 0; + + if (!cpu_has_mmips) + return 0; + + switch (insn.mm_i_format.opcode) { + case mm_pool32a_op: + if ((insn.mm_i_format.simmediate & MM_POOL32A_MINOR_MASK) == + mm_pool32axf_op) { + switch (insn.mm_i_format.simmediate >> + MM_POOL32A_MINOR_SHIFT) { + case mm_jalr_op: + case mm_jalrhb_op: + case mm_jalrs_op: + case mm_jalrshb_op: + if (insn.mm_i_format.rt != 0) /* Not mm_jr */ + regs->regs[insn.mm_i_format.rt] = + regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + *contpc = regs->regs[insn.mm_i_format.rs]; + return 1; + } + } + break; + case mm_pool32i_op: + switch (insn.mm_i_format.rt) { + case mm_bltzals_op: + case mm_bltzal_op: + regs->regs[31] = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + fallthrough; + case mm_bltz_op: + if ((long)regs->regs[insn.mm_i_format.rs] < 0) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + return 1; + case mm_bgezals_op: + case mm_bgezal_op: + regs->regs[31] = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + fallthrough; + case mm_bgez_op: + if ((long)regs->regs[insn.mm_i_format.rs] >= 0) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + return 1; + case mm_blez_op: + if ((long)regs->regs[insn.mm_i_format.rs] <= 0) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + return 1; + case mm_bgtz_op: + if ((long)regs->regs[insn.mm_i_format.rs] <= 0) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + return 1; +#ifdef CONFIG_MIPS_FP_SUPPORT + case mm_bc2f_op: + case mm_bc1f_op: { + unsigned int fcr31; + unsigned int bit; + + bc_false = 1; + fallthrough; + case mm_bc2t_op: + case mm_bc1t_op: + preempt_disable(); + if (is_fpu_owner()) + fcr31 = read_32bit_cp1_register(CP1_STATUS); + else + fcr31 = current->thread.fpu.fcr31; + preempt_enable(); + + if (bc_false) + fcr31 = ~fcr31; + + bit = (insn.mm_i_format.rs >> 2); + bit += (bit != 0); + bit += 23; + if (fcr31 & (1 << bit)) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + return 1; + } +#endif /* CONFIG_MIPS_FP_SUPPORT */ + } + break; + case mm_pool16c_op: + switch (insn.mm_i_format.rt) { + case mm_jalr16_op: + case mm_jalrs16_op: + regs->regs[31] = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + fallthrough; + case mm_jr16_op: + *contpc = regs->regs[insn.mm_i_format.rs]; + return 1; + } + break; + case mm_beqz16_op: + if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] == 0) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_b1_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + return 1; + case mm_bnez16_op: + if ((long)regs->regs[reg16to32map[insn.mm_b1_format.rs]] != 0) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_b1_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + return 1; + case mm_b16_op: + *contpc = regs->cp0_epc + dec_insn.pc_inc + + (insn.mm_b0_format.simmediate << 1); + return 1; + case mm_beq32_op: + if (regs->regs[insn.mm_i_format.rs] == + regs->regs[insn.mm_i_format.rt]) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + dec_insn.next_pc_inc; + return 1; + case mm_bne32_op: + if (regs->regs[insn.mm_i_format.rs] != + regs->regs[insn.mm_i_format.rt]) + *contpc = regs->cp0_epc + + dec_insn.pc_inc + + (insn.mm_i_format.simmediate << 1); + else + *contpc = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + return 1; + case mm_jalx32_op: + regs->regs[31] = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + *contpc = regs->cp0_epc + dec_insn.pc_inc; + *contpc >>= 28; + *contpc <<= 28; + *contpc |= (insn.j_format.target << 2); + return 1; + case mm_jals32_op: + case mm_jal32_op: + regs->regs[31] = regs->cp0_epc + + dec_insn.pc_inc + dec_insn.next_pc_inc; + fallthrough; + case mm_j32_op: + *contpc = regs->cp0_epc + dec_insn.pc_inc; + *contpc >>= 27; + *contpc <<= 27; + *contpc |= (insn.j_format.target << 1); + set_isa16_mode(*contpc); + return 1; + } + return 0; +} + +/* + * Compute return address and emulate branch in microMIPS mode after an + * exception only. It does not handle compact branches/jumps and cannot + * be used in interrupt context. (Compact branches/jumps do not cause + * exceptions.) + */ +int __microMIPS_compute_return_epc(struct pt_regs *regs) +{ + u16 __user *pc16; + u16 halfword; + unsigned int word; + unsigned long contpc; + struct mm_decoded_insn mminsn = { 0 }; + + mminsn.micro_mips_mode = 1; + + /* This load never faults. */ + pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc); + __get_user(halfword, pc16); + pc16++; + contpc = regs->cp0_epc + 2; + word = ((unsigned int)halfword << 16); + mminsn.pc_inc = 2; + + if (!mm_insn_16bit(halfword)) { + __get_user(halfword, pc16); + pc16++; + contpc = regs->cp0_epc + 4; + mminsn.pc_inc = 4; + word |= halfword; + } + mminsn.insn = word; + + if (get_user(halfword, pc16)) + goto sigsegv; + mminsn.next_pc_inc = 2; + word = ((unsigned int)halfword << 16); + + if (!mm_insn_16bit(halfword)) { + pc16++; + if (get_user(halfword, pc16)) + goto sigsegv; + mminsn.next_pc_inc = 4; + word |= halfword; + } + mminsn.next_insn = word; + + mm_isBranchInstr(regs, mminsn, &contpc); + + regs->cp0_epc = contpc; + + return 0; + +sigsegv: + force_sig(SIGSEGV); + return -EFAULT; +} + +/* + * Compute return address and emulate branch in MIPS16e mode after an + * exception only. It does not handle compact branches/jumps and cannot + * be used in interrupt context. (Compact branches/jumps do not cause + * exceptions.) + */ +int __MIPS16e_compute_return_epc(struct pt_regs *regs) +{ + u16 __user *addr; + union mips16e_instruction inst; + u16 inst2; + u32 fullinst; + long epc; + + epc = regs->cp0_epc; + + /* Read the instruction. */ + addr = (u16 __user *)msk_isa16_mode(epc); + if (__get_user(inst.full, addr)) { + force_sig(SIGSEGV); + return -EFAULT; + } + + switch (inst.ri.opcode) { + case MIPS16e_extend_op: + regs->cp0_epc += 4; + return 0; + + /* + * JAL and JALX in MIPS16e mode + */ + case MIPS16e_jal_op: + addr += 1; + if (__get_user(inst2, addr)) { + force_sig(SIGSEGV); + return -EFAULT; + } + fullinst = ((unsigned)inst.full << 16) | inst2; + regs->regs[31] = epc + 6; + epc += 4; + epc >>= 28; + epc <<= 28; + /* + * JAL:5 X:1 TARGET[20-16]:5 TARGET[25:21]:5 TARGET[15:0]:16 + * + * ......TARGET[15:0].................TARGET[20:16]........... + * ......TARGET[25:21] + */ + epc |= + ((fullinst & 0xffff) << 2) | ((fullinst & 0x3e00000) >> 3) | + ((fullinst & 0x1f0000) << 7); + if (!inst.jal.x) + set_isa16_mode(epc); /* Set ISA mode bit. */ + regs->cp0_epc = epc; + return 0; + + /* + * J(AL)R(C) + */ + case MIPS16e_rr_op: + if (inst.rr.func == MIPS16e_jr_func) { + + if (inst.rr.ra) + regs->cp0_epc = regs->regs[31]; + else + regs->cp0_epc = + regs->regs[reg16to32[inst.rr.rx]]; + + if (inst.rr.l) { + if (inst.rr.nd) + regs->regs[31] = epc + 2; + else + regs->regs[31] = epc + 4; + } + return 0; + } + break; + } + + /* + * All other cases have no branch delay slot and are 16-bits. + * Branches do not cause an exception. + */ + regs->cp0_epc += 2; + + return 0; +} + +/** + * __compute_return_epc_for_insn - Computes the return address and do emulate + * branch simulation, if required. + * + * @regs: Pointer to pt_regs + * @insn: branch instruction to decode + * Return: -EFAULT on error and forces SIGILL, and on success + * returns 0 or BRANCH_LIKELY_TAKEN as appropriate after + * evaluating the branch. + * + * MIPS R6 Compact branches and forbidden slots: + * Compact branches do not throw exceptions because they do + * not have delay slots. The forbidden slot instruction ($PC+4) + * is only executed if the branch was not taken. Otherwise the + * forbidden slot is skipped entirely. This means that the + * only possible reason to be here because of a MIPS R6 compact + * branch instruction is that the forbidden slot has thrown one. + * In that case the branch was not taken, so the EPC can be safely + * set to EPC + 8. + */ +int __compute_return_epc_for_insn(struct pt_regs *regs, + union mips_instruction insn) +{ + long epc = regs->cp0_epc; + unsigned int dspcontrol; + int ret = 0; + + switch (insn.i_format.opcode) { + /* + * jr and jalr are in r_format format. + */ + case spec_op: + switch (insn.r_format.func) { + case jalr_op: + regs->regs[insn.r_format.rd] = epc + 8; + fallthrough; + case jr_op: + if (NO_R6EMU && insn.r_format.func == jr_op) + goto sigill_r2r6; + regs->cp0_epc = regs->regs[insn.r_format.rs]; + break; + } + break; + + /* + * This group contains: + * bltz_op, bgez_op, bltzl_op, bgezl_op, + * bltzal_op, bgezal_op, bltzall_op, bgezall_op. + */ + case bcond_op: + switch (insn.i_format.rt) { + case bltzl_op: + if (NO_R6EMU) + goto sigill_r2r6; + fallthrough; + case bltz_op: + if ((long)regs->regs[insn.i_format.rs] < 0) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.rt == bltzl_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case bgezl_op: + if (NO_R6EMU) + goto sigill_r2r6; + fallthrough; + case bgez_op: + if ((long)regs->regs[insn.i_format.rs] >= 0) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.rt == bgezl_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case bltzal_op: + case bltzall_op: + if (NO_R6EMU && (insn.i_format.rs || + insn.i_format.rt == bltzall_op)) + goto sigill_r2r6; + regs->regs[31] = epc + 8; + /* + * OK we are here either because we hit a NAL + * instruction or because we are emulating an + * old bltzal{,l} one. Let's figure out what the + * case really is. + */ + if (!insn.i_format.rs) { + /* + * NAL or BLTZAL with rs == 0 + * Doesn't matter if we are R6 or not. The + * result is the same + */ + regs->cp0_epc += 4 + + (insn.i_format.simmediate << 2); + break; + } + /* Now do the real thing for non-R6 BLTZAL{,L} */ + if ((long)regs->regs[insn.i_format.rs] < 0) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.rt == bltzall_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case bgezal_op: + case bgezall_op: + if (NO_R6EMU && (insn.i_format.rs || + insn.i_format.rt == bgezall_op)) + goto sigill_r2r6; + regs->regs[31] = epc + 8; + /* + * OK we are here either because we hit a BAL + * instruction or because we are emulating an + * old bgezal{,l} one. Let's figure out what the + * case really is. + */ + if (!insn.i_format.rs) { + /* + * BAL or BGEZAL with rs == 0 + * Doesn't matter if we are R6 or not. The + * result is the same + */ + regs->cp0_epc += 4 + + (insn.i_format.simmediate << 2); + break; + } + /* Now do the real thing for non-R6 BGEZAL{,L} */ + if ((long)regs->regs[insn.i_format.rs] >= 0) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.rt == bgezall_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case bposge32_op: + if (!cpu_has_dsp) + goto sigill_dsp; + + dspcontrol = rddsp(0x01); + + if (dspcontrol >= 32) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + } else + epc += 8; + regs->cp0_epc = epc; + break; + } + break; + + /* + * These are unconditional and in j_format. + */ + case jalx_op: + case jal_op: + regs->regs[31] = regs->cp0_epc + 8; + fallthrough; + case j_op: + epc += 4; + epc >>= 28; + epc <<= 28; + epc |= (insn.j_format.target << 2); + regs->cp0_epc = epc; + if (insn.i_format.opcode == jalx_op) + set_isa16_mode(regs->cp0_epc); + break; + + /* + * These are conditional and in i_format. + */ + case beql_op: + if (NO_R6EMU) + goto sigill_r2r6; + fallthrough; + case beq_op: + if (regs->regs[insn.i_format.rs] == + regs->regs[insn.i_format.rt]) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.opcode == beql_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case bnel_op: + if (NO_R6EMU) + goto sigill_r2r6; + fallthrough; + case bne_op: + if (regs->regs[insn.i_format.rs] != + regs->regs[insn.i_format.rt]) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.opcode == bnel_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case blezl_op: /* not really i_format */ + if (!insn.i_format.rt && NO_R6EMU) + goto sigill_r2r6; + fallthrough; + case blez_op: + /* + * Compact branches for R6 for the + * blez and blezl opcodes. + * BLEZ | rs = 0 | rt != 0 == BLEZALC + * BLEZ | rs = rt != 0 == BGEZALC + * BLEZ | rs != 0 | rt != 0 == BGEUC + * BLEZL | rs = 0 | rt != 0 == BLEZC + * BLEZL | rs = rt != 0 == BGEZC + * BLEZL | rs != 0 | rt != 0 == BGEC + * + * For real BLEZ{,L}, rt is always 0. + */ + + if (cpu_has_mips_r6 && insn.i_format.rt) { + if ((insn.i_format.opcode == blez_op) && + ((!insn.i_format.rs && insn.i_format.rt) || + (insn.i_format.rs == insn.i_format.rt))) + regs->regs[31] = epc + 4; + regs->cp0_epc += 8; + break; + } + /* rt field assumed to be zero */ + if ((long)regs->regs[insn.i_format.rs] <= 0) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.opcode == blezl_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case bgtzl_op: + if (!insn.i_format.rt && NO_R6EMU) + goto sigill_r2r6; + fallthrough; + case bgtz_op: + /* + * Compact branches for R6 for the + * bgtz and bgtzl opcodes. + * BGTZ | rs = 0 | rt != 0 == BGTZALC + * BGTZ | rs = rt != 0 == BLTZALC + * BGTZ | rs != 0 | rt != 0 == BLTUC + * BGTZL | rs = 0 | rt != 0 == BGTZC + * BGTZL | rs = rt != 0 == BLTZC + * BGTZL | rs != 0 | rt != 0 == BLTC + * + * *ZALC varint for BGTZ &&& rt != 0 + * For real GTZ{,L}, rt is always 0. + */ + if (cpu_has_mips_r6 && insn.i_format.rt) { + if ((insn.i_format.opcode == blez_op) && + ((!insn.i_format.rs && insn.i_format.rt) || + (insn.i_format.rs == insn.i_format.rt))) + regs->regs[31] = epc + 4; + regs->cp0_epc += 8; + break; + } + + /* rt field assumed to be zero */ + if ((long)regs->regs[insn.i_format.rs] > 0) { + epc = epc + 4 + (insn.i_format.simmediate << 2); + if (insn.i_format.opcode == bgtzl_op) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + +#ifdef CONFIG_MIPS_FP_SUPPORT + /* + * And now the FPA/cp1 branch instructions. + */ + case cop1_op: { + unsigned int bit, fcr31, reg; + + if (cpu_has_mips_r6 && + ((insn.i_format.rs == bc1eqz_op) || + (insn.i_format.rs == bc1nez_op))) { + if (!init_fp_ctx(current)) + lose_fpu(1); + reg = insn.i_format.rt; + bit = get_fpr32(¤t->thread.fpu.fpr[reg], 0) & 0x1; + if (insn.i_format.rs == bc1eqz_op) + bit = !bit; + own_fpu(1); + if (bit) + epc = epc + 4 + + (insn.i_format.simmediate << 2); + else + epc += 8; + regs->cp0_epc = epc; + + break; + } else { + + preempt_disable(); + if (is_fpu_owner()) + fcr31 = read_32bit_cp1_register(CP1_STATUS); + else + fcr31 = current->thread.fpu.fcr31; + preempt_enable(); + + bit = (insn.i_format.rt >> 2); + bit += (bit != 0); + bit += 23; + switch (insn.i_format.rt & 3) { + case 0: /* bc1f */ + case 2: /* bc1fl */ + if (~fcr31 & (1 << bit)) { + epc = epc + 4 + + (insn.i_format.simmediate << 2); + if (insn.i_format.rt == 2) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + + case 1: /* bc1t */ + case 3: /* bc1tl */ + if (fcr31 & (1 << bit)) { + epc = epc + 4 + + (insn.i_format.simmediate << 2); + if (insn.i_format.rt == 3) + ret = BRANCH_LIKELY_TAKEN; + } else + epc += 8; + regs->cp0_epc = epc; + break; + } + break; + } + } +#endif /* CONFIG_MIPS_FP_SUPPORT */ + +#ifdef CONFIG_CPU_CAVIUM_OCTEON + case lwc2_op: /* This is bbit0 on Octeon */ + if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt)) + == 0) + epc = epc + 4 + (insn.i_format.simmediate << 2); + else + epc += 8; + regs->cp0_epc = epc; + break; + case ldc2_op: /* This is bbit032 on Octeon */ + if ((regs->regs[insn.i_format.rs] & + (1ull<<(insn.i_format.rt+32))) == 0) + epc = epc + 4 + (insn.i_format.simmediate << 2); + else + epc += 8; + regs->cp0_epc = epc; + break; + case swc2_op: /* This is bbit1 on Octeon */ + if (regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt)) + epc = epc + 4 + (insn.i_format.simmediate << 2); + else + epc += 8; + regs->cp0_epc = epc; + break; + case sdc2_op: /* This is bbit132 on Octeon */ + if (regs->regs[insn.i_format.rs] & + (1ull<<(insn.i_format.rt+32))) + epc = epc + 4 + (insn.i_format.simmediate << 2); + else + epc += 8; + regs->cp0_epc = epc; + break; +#else + case bc6_op: + /* Only valid for MIPS R6 */ + if (!cpu_has_mips_r6) + goto sigill_r6; + regs->cp0_epc += 8; + break; + case balc6_op: + if (!cpu_has_mips_r6) + goto sigill_r6; + /* Compact branch: BALC */ + regs->regs[31] = epc + 4; + epc += 4 + (insn.i_format.simmediate << 2); + regs->cp0_epc = epc; + break; + case pop66_op: + if (!cpu_has_mips_r6) + goto sigill_r6; + /* Compact branch: BEQZC || JIC */ + regs->cp0_epc += 8; + break; + case pop76_op: + if (!cpu_has_mips_r6) + goto sigill_r6; + /* Compact branch: BNEZC || JIALC */ + if (!insn.i_format.rs) { + /* JIALC: set $31/ra */ + regs->regs[31] = epc + 4; + } + regs->cp0_epc += 8; + break; +#endif + case pop10_op: + case pop30_op: + /* Only valid for MIPS R6 */ + if (!cpu_has_mips_r6) + goto sigill_r6; + /* + * Compact branches: + * bovc, beqc, beqzalc, bnvc, bnec, bnezlac + */ + if (insn.i_format.rt && !insn.i_format.rs) + regs->regs[31] = epc + 4; + regs->cp0_epc += 8; + break; + } + + return ret; + +sigill_dsp: + pr_debug("%s: DSP branch but not DSP ASE - sending SIGILL.\n", + current->comm); + force_sig(SIGILL); + return -EFAULT; +sigill_r2r6: + pr_debug("%s: R2 branch but r2-to-r6 emulator is not present - sending SIGILL.\n", + current->comm); + force_sig(SIGILL); + return -EFAULT; +sigill_r6: + pr_debug("%s: R6 branch but no MIPSr6 ISA support - sending SIGILL.\n", + current->comm); + force_sig(SIGILL); + return -EFAULT; +} +EXPORT_SYMBOL_GPL(__compute_return_epc_for_insn); + +int __compute_return_epc(struct pt_regs *regs) +{ + unsigned int __user *addr; + long epc; + union mips_instruction insn; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + /* + * Read the instruction + */ + addr = (unsigned int __user *) epc; + if (__get_user(insn.word, addr)) { + force_sig(SIGSEGV); + return -EFAULT; + } + + return __compute_return_epc_for_insn(regs, insn); + +unaligned: + printk("%s: unaligned epc - sending SIGBUS.\n", current->comm); + force_sig(SIGBUS); + return -EFAULT; +} + +#if (defined CONFIG_KPROBES) || (defined CONFIG_UPROBES) + +int __insn_is_compact_branch(union mips_instruction insn) +{ + if (!cpu_has_mips_r6) + return 0; + + switch (insn.i_format.opcode) { + case blezl_op: + case bgtzl_op: + case blez_op: + case bgtz_op: + /* + * blez[l] and bgtz[l] opcodes with non-zero rt + * are MIPS R6 compact branches + */ + if (insn.i_format.rt) + return 1; + break; + case bc6_op: + case balc6_op: + case pop10_op: + case pop30_op: + case pop66_op: + case pop76_op: + return 1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(__insn_is_compact_branch); + +#endif /* CONFIG_KPROBES || CONFIG_UPROBES */ diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c new file mode 100644 index 000000000..529dab855 --- /dev/null +++ b/arch/mips/kernel/cacheinfo.c @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MIPS cacheinfo support + */ +#include <linux/cacheinfo.h> + +/* Populates leaf and increments to next leaf */ +#define populate_cache(cache, leaf, c_level, c_type) \ +do { \ + leaf->type = c_type; \ + leaf->level = c_level; \ + leaf->coherency_line_size = c->cache.linesz; \ + leaf->number_of_sets = c->cache.sets; \ + leaf->ways_of_associativity = c->cache.ways; \ + leaf->size = c->cache.linesz * c->cache.sets * \ + c->cache.ways; \ + leaf++; \ +} while (0) + +int init_cache_level(unsigned int cpu) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + int levels = 0, leaves = 0; + + /* + * If Dcache is not set, we assume the cache structures + * are not properly initialized. + */ + if (c->dcache.waysize) + levels += 1; + else + return -ENOENT; + + + leaves += (c->icache.waysize) ? 2 : 1; + + if (c->scache.waysize) { + levels++; + leaves++; + } + + if (c->tcache.waysize) { + levels++; + leaves++; + } + + this_cpu_ci->num_levels = levels; + this_cpu_ci->num_leaves = leaves; + return 0; +} + +static void fill_cpumask_siblings(int cpu, cpumask_t *cpu_map) +{ + int cpu1; + + for_each_possible_cpu(cpu1) + if (cpus_are_siblings(cpu, cpu1)) + cpumask_set_cpu(cpu1, cpu_map); +} + +static void fill_cpumask_cluster(int cpu, cpumask_t *cpu_map) +{ + int cpu1; + int cluster = cpu_cluster(&cpu_data[cpu]); + + for_each_possible_cpu(cpu1) + if (cpu_cluster(&cpu_data[cpu1]) == cluster) + cpumask_set_cpu(cpu1, cpu_map); +} + +int populate_cache_leaves(unsigned int cpu) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + struct cacheinfo *this_leaf = this_cpu_ci->info_list; + + if (c->icache.waysize) { + /* L1 caches are per core */ + fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map); + populate_cache(dcache, this_leaf, 1, CACHE_TYPE_DATA); + fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map); + populate_cache(icache, this_leaf, 1, CACHE_TYPE_INST); + } else { + populate_cache(dcache, this_leaf, 1, CACHE_TYPE_UNIFIED); + } + + if (c->scache.waysize) { + /* L2 cache is per cluster */ + fill_cpumask_cluster(cpu, &this_leaf->shared_cpu_map); + populate_cache(scache, this_leaf, 2, CACHE_TYPE_UNIFIED); + } + + if (c->tcache.waysize) + populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED); + + this_cpu_ci->cpu_map_populated = true; + + return 0; +} diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c new file mode 100644 index 000000000..d39a2963b --- /dev/null +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000,2001,2004 Broadcom Corporation + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> +#include <linux/smp.h> +#include <linux/irq.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/bcm1480_int.h> +#include <asm/sibyte/bcm1480_scd.h> + +#include <asm/sibyte/sb1250.h> + +#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0 +#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 +#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 + +/* + * The general purpose timer ticks at 1MHz independent if + * the rest of the system + */ + +static int sibyte_set_periodic(struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + __raw_writeq(0, cfg); + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, cfg); + return 0; +} + +static int sibyte_shutdown(struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + + /* Stop the timer until we actually program a shot */ + __raw_writeq(0, cfg); + return 0; +} + +static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + __raw_writeq(0, cfg); + __raw_writeq(delta - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE, cfg); + + return 0; +} + +static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = dev_id; + void __iomem *cfg; + unsigned long tmode; + + if (clockevent_state_periodic(cd)) + tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS; + else + tmode = 0; + + /* ACK interrupt */ + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + ____raw_writeq(tmode, cfg); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent); +static DEFINE_PER_CPU(char [18], sibyte_hpt_name); + +void sb1480_clockevent_init(void) +{ + unsigned int cpu = smp_processor_id(); + unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu; + struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu); + unsigned char *name = per_cpu(sibyte_hpt_name, cpu); + unsigned long flags = IRQF_PERCPU | IRQF_TIMER; + + BUG_ON(cpu > 3); /* Only have 4 general purpose timers */ + + sprintf(name, "bcm1480-counter-%d", cpu); + cd->name = name; + cd->features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + clockevent_set_clock(cd, V_SCD_TIMER_FREQ); + cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); + cd->max_delta_ticks = 0x7fffff; + cd->min_delta_ns = clockevent_delta2ns(2, cd); + cd->min_delta_ticks = 2; + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of(cpu); + cd->set_next_event = sibyte_next_event; + cd->set_state_shutdown = sibyte_shutdown; + cd->set_state_periodic = sibyte_set_periodic; + cd->set_state_oneshot = sibyte_shutdown; + clockevents_register_device(cd); + + bcm1480_mask_irq(cpu, irq); + + /* + * Map the timer interrupt to IP[4] of this cpu + */ + __raw_writeq(IMR_IP4_VAL, + IOADDR(A_BCM1480_IMR_REGISTER(cpu, + R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3))); + + bcm1480_unmask_irq(cpu, irq); + + irq_set_affinity(irq, cpumask_of(cpu)); + if (request_irq(irq, sibyte_counter_handler, flags, name, cd)) + pr_err("Failed to request irq %d (%s)\n", irq, name); +} diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c new file mode 100644 index 000000000..9a47fbcd4 --- /dev/null +++ b/arch/mips/kernel/cevt-ds1287.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DS1287 clockevent driver + * + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> + */ +#include <linux/clockchips.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/mc146818rtc.h> +#include <linux/irq.h> + +#include <asm/time.h> + +int ds1287_timer_state(void) +{ + return (CMOS_READ(RTC_REG_C) & RTC_PF) != 0; +} + +int ds1287_set_base_clock(unsigned int hz) +{ + u8 rate; + + switch (hz) { + case 128: + rate = 0x9; + break; + case 256: + rate = 0x8; + break; + case 1024: + rate = 0x6; + break; + default: + return -EINVAL; + } + + CMOS_WRITE(RTC_REF_CLCK_32KHZ | rate, RTC_REG_A); + + return 0; +} + +static int ds1287_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + return -EINVAL; +} + +static int ds1287_shutdown(struct clock_event_device *evt) +{ + u8 val; + + spin_lock(&rtc_lock); + + val = CMOS_READ(RTC_REG_B); + val &= ~RTC_PIE; + CMOS_WRITE(val, RTC_REG_B); + + spin_unlock(&rtc_lock); + return 0; +} + +static int ds1287_set_periodic(struct clock_event_device *evt) +{ + u8 val; + + spin_lock(&rtc_lock); + + val = CMOS_READ(RTC_REG_B); + val |= RTC_PIE; + CMOS_WRITE(val, RTC_REG_B); + + spin_unlock(&rtc_lock); + return 0; +} + +static void ds1287_event_handler(struct clock_event_device *dev) +{ +} + +static struct clock_event_device ds1287_clockevent = { + .name = "ds1287", + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_next_event = ds1287_set_next_event, + .set_state_shutdown = ds1287_shutdown, + .set_state_periodic = ds1287_set_periodic, + .tick_resume = ds1287_shutdown, + .event_handler = ds1287_event_handler, +}; + +static irqreturn_t ds1287_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd = &ds1287_clockevent; + + /* Ack the RTC interrupt. */ + CMOS_READ(RTC_REG_C); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +int __init ds1287_clockevent_init(int irq) +{ + unsigned long flags = IRQF_PERCPU | IRQF_TIMER; + struct clock_event_device *cd; + + cd = &ds1287_clockevent; + cd->rating = 100; + cd->irq = irq; + clockevent_set_clock(cd, 32768); + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->max_delta_ticks = 0x7fffffff; + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + cd->min_delta_ticks = 0x300; + cd->cpumask = cpumask_of(0); + + clockevents_register_device(&ds1287_clockevent); + + return request_irq(irq, ds1287_interrupt, flags, "ds1287", NULL); +} diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c new file mode 100644 index 000000000..5b132e8c5 --- /dev/null +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GT641xx clockevent routines. + * + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + */ +#include <linux/clockchips.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/irq.h> + +#include <asm/gt64120.h> +#include <asm/time.h> + +static DEFINE_RAW_SPINLOCK(gt641xx_timer_lock); +static unsigned int gt641xx_base_clock; + +void gt641xx_set_base_clock(unsigned int clock) +{ + gt641xx_base_clock = clock; +} + +int gt641xx_timer0_state(void) +{ + if (GT_READ(GT_TC0_OFS)) + return 0; + + GT_WRITE(GT_TC0_OFS, gt641xx_base_clock / HZ); + GT_WRITE(GT_TC_CONTROL_OFS, GT_TC_CONTROL_ENTC0_MSK); + + return 1; +} + +static int gt641xx_timer0_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + u32 ctrl; + + raw_spin_lock(>641xx_timer_lock); + + ctrl = GT_READ(GT_TC_CONTROL_OFS); + ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK); + ctrl |= GT_TC_CONTROL_ENTC0_MSK; + + GT_WRITE(GT_TC0_OFS, delta); + GT_WRITE(GT_TC_CONTROL_OFS, ctrl); + + raw_spin_unlock(>641xx_timer_lock); + + return 0; +} + +static int gt641xx_timer0_shutdown(struct clock_event_device *evt) +{ + u32 ctrl; + + raw_spin_lock(>641xx_timer_lock); + + ctrl = GT_READ(GT_TC_CONTROL_OFS); + ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK); + GT_WRITE(GT_TC_CONTROL_OFS, ctrl); + + raw_spin_unlock(>641xx_timer_lock); + return 0; +} + +static int gt641xx_timer0_set_oneshot(struct clock_event_device *evt) +{ + u32 ctrl; + + raw_spin_lock(>641xx_timer_lock); + + ctrl = GT_READ(GT_TC_CONTROL_OFS); + ctrl &= ~GT_TC_CONTROL_SELTC0_MSK; + ctrl |= GT_TC_CONTROL_ENTC0_MSK; + GT_WRITE(GT_TC_CONTROL_OFS, ctrl); + + raw_spin_unlock(>641xx_timer_lock); + return 0; +} + +static int gt641xx_timer0_set_periodic(struct clock_event_device *evt) +{ + u32 ctrl; + + raw_spin_lock(>641xx_timer_lock); + + ctrl = GT_READ(GT_TC_CONTROL_OFS); + ctrl |= GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK; + GT_WRITE(GT_TC_CONTROL_OFS, ctrl); + + raw_spin_unlock(>641xx_timer_lock); + return 0; +} + +static void gt641xx_timer0_event_handler(struct clock_event_device *dev) +{ +} + +static struct clock_event_device gt641xx_timer0_clockevent = { + .name = "gt641xx-timer0", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .irq = GT641XX_TIMER0_IRQ, + .set_next_event = gt641xx_timer0_set_next_event, + .set_state_shutdown = gt641xx_timer0_shutdown, + .set_state_periodic = gt641xx_timer0_set_periodic, + .set_state_oneshot = gt641xx_timer0_set_oneshot, + .tick_resume = gt641xx_timer0_shutdown, + .event_handler = gt641xx_timer0_event_handler, +}; + +static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd = >641xx_timer0_clockevent; + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static int __init gt641xx_timer0_clockevent_init(void) +{ + struct clock_event_device *cd; + + if (!gt641xx_base_clock) + return 0; + + GT_WRITE(GT_TC0_OFS, gt641xx_base_clock / HZ); + + cd = >641xx_timer0_clockevent; + cd->rating = 200 + gt641xx_base_clock / 10000000; + clockevent_set_clock(cd, gt641xx_base_clock); + cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd); + cd->max_delta_ticks = 0x7fffffff; + cd->min_delta_ns = clockevent_delta2ns(0x300, cd); + cd->min_delta_ticks = 0x300; + cd->cpumask = cpumask_of(0); + + clockevents_register_device(>641xx_timer0_clockevent); + + return request_irq(GT641XX_TIMER0_IRQ, gt641xx_timer0_interrupt, + IRQF_PERCPU | IRQF_TIMER, "gt641xx_timer0", NULL); +} +arch_initcall(gt641xx_timer0_clockevent_init); diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c new file mode 100644 index 000000000..995ad9e69 --- /dev/null +++ b/arch/mips/kernel/cevt-r4k.c @@ -0,0 +1,345 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/cpufreq.h> +#include <linux/percpu.h> +#include <linux/smp.h> +#include <linux/irq.h> + +#include <asm/time.h> +#include <asm/cevt-r4k.h> + +static int mips_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned int cnt; + int res; + + cnt = read_c0_count(); + cnt += delta; + write_c0_compare(cnt); + res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0; + return res; +} + +/** + * calculate_min_delta() - Calculate a good minimum delta for mips_next_event(). + * + * Running under virtualisation can introduce overhead into mips_next_event() in + * the form of hypervisor emulation of CP0_Count/CP0_Compare registers, + * potentially with an unnatural frequency, which makes a fixed min_delta_ns + * value inappropriate as it may be too small. + * + * It can also introduce occasional latency from the guest being descheduled. + * + * This function calculates a good minimum delta based roughly on the 75th + * percentile of the time taken to do the mips_next_event() sequence, in order + * to handle potentially higher overhead while also eliminating outliers due to + * unpredictable hypervisor latency (which can be handled by retries). + * + * Return: An appropriate minimum delta for the clock event device. + */ +static unsigned int calculate_min_delta(void) +{ + unsigned int cnt, i, j, k, l; + unsigned int buf1[4], buf2[3]; + unsigned int min_delta; + + /* + * Calculate the median of 5 75th percentiles of 5 samples of how long + * it takes to set CP0_Compare = CP0_Count + delta. + */ + for (i = 0; i < 5; ++i) { + for (j = 0; j < 5; ++j) { + /* + * This is like the code in mips_next_event(), and + * directly measures the borderline "safe" delta. + */ + cnt = read_c0_count(); + write_c0_compare(cnt); + cnt = read_c0_count() - cnt; + + /* Sorted insert into buf1 */ + for (k = 0; k < j; ++k) { + if (cnt < buf1[k]) { + l = min_t(unsigned int, + j, ARRAY_SIZE(buf1) - 1); + for (; l > k; --l) + buf1[l] = buf1[l - 1]; + break; + } + } + if (k < ARRAY_SIZE(buf1)) + buf1[k] = cnt; + } + + /* Sorted insert of 75th percentile into buf2 */ + for (k = 0; k < i && k < ARRAY_SIZE(buf2); ++k) { + if (buf1[ARRAY_SIZE(buf1) - 1] < buf2[k]) { + l = min_t(unsigned int, + i, ARRAY_SIZE(buf2) - 1); + for (; l > k; --l) + buf2[l] = buf2[l - 1]; + break; + } + } + if (k < ARRAY_SIZE(buf2)) + buf2[k] = buf1[ARRAY_SIZE(buf1) - 1]; + } + + /* Use 2 * median of 75th percentiles */ + min_delta = buf2[ARRAY_SIZE(buf2) - 1] * 2; + + /* Don't go too low */ + if (min_delta < 0x300) + min_delta = 0x300; + + pr_debug("%s: median 75th percentile=%#x, min_delta=%#x\n", + __func__, buf2[ARRAY_SIZE(buf2) - 1], min_delta); + return min_delta; +} + +DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); +int cp0_timer_irq_installed; + +/* + * Possibly handle a performance counter interrupt. + * Return true if the timer interrupt should not be checked + */ +static inline int handle_perf_irq(int r2) +{ + /* + * The performance counter overflow interrupt may be shared with the + * timer interrupt (cp0_perfcount_irq < 0). If it is and a + * performance counter has overflowed (perf_irq() == IRQ_HANDLED) + * and we can't reliably determine if a counter interrupt has also + * happened (!r2) then don't check for a timer interrupt. + */ + return (cp0_perfcount_irq < 0) && + perf_irq() == IRQ_HANDLED && + !r2; +} + +irqreturn_t c0_compare_interrupt(int irq, void *dev_id) +{ + const int r2 = cpu_has_mips_r2_r6; + struct clock_event_device *cd; + int cpu = smp_processor_id(); + + /* + * Suckage alert: + * Before R2 of the architecture there was no way to see if a + * performance counter interrupt was pending, so we have to run + * the performance counter interrupt handler anyway. + */ + if (handle_perf_irq(r2)) + return IRQ_HANDLED; + + /* + * The same applies to performance counter interrupts. But with the + * above we now know that the reason we got here must be a timer + * interrupt. Being the paranoiacs we are we check anyway. + */ + if (!r2 || (read_c0_cause() & CAUSEF_TI)) { + /* Clear Count/Compare Interrupt */ + write_c0_compare(read_c0_compare()); + cd = &per_cpu(mips_clockevent_device, cpu); + cd->event_handler(cd); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +struct irqaction c0_compare_irqaction = { + .handler = c0_compare_interrupt, + /* + * IRQF_SHARED: The timer interrupt may be shared with other interrupts + * such as perf counter and FDC interrupts. + */ + .flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED, + .name = "timer", +}; + + +void mips_event_handler(struct clock_event_device *dev) +{ +} + +/* + * FIXME: This doesn't hold for the relocated E9000 compare interrupt. + */ +static int c0_compare_int_pending(void) +{ + /* When cpu_has_mips_r2, this checks Cause.TI instead of Cause.IP7 */ + return (read_c0_cause() >> cp0_compare_irq_shift) & (1ul << CAUSEB_IP); +} + +/* + * Compare interrupt can be routed and latched outside the core, + * so wait up to worst case number of cycle counter ticks for timer interrupt + * changes to propagate to the cause register. + */ +#define COMPARE_INT_SEEN_TICKS 50 + +int c0_compare_int_usable(void) +{ + unsigned int delta; + unsigned int cnt; + +#ifdef CONFIG_KVM_GUEST + return 1; +#endif + + /* + * IP7 already pending? Try to clear it by acking the timer. + */ + if (c0_compare_int_pending()) { + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; + if (c0_compare_int_pending()) + return 0; + } + + for (delta = 0x10; delta <= 0x400000; delta <<= 1) { + cnt = read_c0_count(); + cnt += delta; + write_c0_compare(cnt); + back_to_back_c0_hazard(); + if ((int)(read_c0_count() - cnt) < 0) + break; + /* increase delta if the timer was already expired */ + } + + while ((int)(read_c0_count() - cnt) <= 0) + ; /* Wait for expiry */ + + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (c0_compare_int_pending()) + break; + if (!c0_compare_int_pending()) + return 0; + cnt = read_c0_count(); + write_c0_compare(cnt); + back_to_back_c0_hazard(); + while (read_c0_count() < (cnt + COMPARE_INT_SEEN_TICKS)) + if (!c0_compare_int_pending()) + break; + if (c0_compare_int_pending()) + return 0; + + /* + * Feels like a real count / compare timer. + */ + return 1; +} + +unsigned int __weak get_c0_compare_int(void) +{ + return MIPS_CPU_IRQ_BASE + cp0_compare_irq; +} + +#ifdef CONFIG_CPU_FREQ + +static unsigned long mips_ref_freq; + +static int r4k_cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + struct clock_event_device *cd; + unsigned long rate; + int cpu; + + if (!mips_ref_freq) + mips_ref_freq = freq->old; + + if (val == CPUFREQ_POSTCHANGE) { + rate = cpufreq_scale(mips_hpt_frequency, mips_ref_freq, + freq->new); + + for_each_cpu(cpu, freq->policy->cpus) { + cd = &per_cpu(mips_clockevent_device, cpu); + + clockevents_update_freq(cd, rate); + } + } + + return 0; +} + +static struct notifier_block r4k_cpufreq_notifier = { + .notifier_call = r4k_cpufreq_callback, +}; + +static int __init r4k_register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&r4k_cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); + +} +core_initcall(r4k_register_cpufreq_notifier); + +#endif /* !CONFIG_CPU_FREQ */ + +int r4k_clockevent_init(void) +{ + unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED; + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd; + unsigned int irq, min_delta; + + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + + if (!c0_compare_int_usable()) + return -ENXIO; + + /* + * With vectored interrupts things are getting platform specific. + * get_c0_compare_int is a hook to allow a platform to return the + * interrupt number of its liking. + */ + irq = get_c0_compare_int(); + + cd = &per_cpu(mips_clockevent_device, cpu); + + cd->name = "MIPS"; + cd->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_C3STOP | + CLOCK_EVT_FEAT_PERCPU; + + min_delta = calculate_min_delta(); + + cd->rating = 300; + cd->irq = irq; + cd->cpumask = cpumask_of(cpu); + cd->set_next_event = mips_next_event; + cd->event_handler = mips_event_handler; + + clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff); + + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + if (request_irq(irq, c0_compare_interrupt, flags, "timer", + c0_compare_interrupt)) + pr_err("Failed to request irq %d (timer)\n", irq); + + return 0; +} + diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c new file mode 100644 index 000000000..0451273fa --- /dev/null +++ b/arch/mips/kernel/cevt-sb1250.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/percpu.h> +#include <linux/smp.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_scd.h> + +#define IMR_IP2_VAL K_INT_MAP_I0 +#define IMR_IP3_VAL K_INT_MAP_I1 +#define IMR_IP4_VAL K_INT_MAP_I2 + +/* + * The general purpose timer ticks at 1MHz independent if + * the rest of the system + */ + +static int sibyte_shutdown(struct clock_event_device *evt) +{ + void __iomem *cfg; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(smp_processor_id(), R_SCD_TIMER_CFG)); + + /* Stop the timer until we actually program a shot */ + __raw_writeq(0, cfg); + + return 0; +} + +static int sibyte_set_periodic(struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + __raw_writeq(0, cfg); + __raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, cfg); + + return 0; +} + +static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd) +{ + unsigned int cpu = smp_processor_id(); + void __iomem *cfg, *init; + + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)); + + __raw_writeq(0, cfg); + __raw_writeq(delta - 1, init); + __raw_writeq(M_SCD_TIMER_ENABLE, cfg); + + return 0; +} + +static irqreturn_t sibyte_counter_handler(int irq, void *dev_id) +{ + unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = dev_id; + void __iomem *cfg; + unsigned long tmode; + + if (clockevent_state_periodic(cd)) + tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS; + else + tmode = 0; + + /* ACK interrupt */ + cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)); + ____raw_writeq(tmode, cfg); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent); +static DEFINE_PER_CPU(char [18], sibyte_hpt_name); + +void sb1250_clockevent_init(void) +{ + unsigned int cpu = smp_processor_id(); + unsigned int irq = K_INT_TIMER_0 + cpu; + struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu); + unsigned char *name = per_cpu(sibyte_hpt_name, cpu); + unsigned long flags = IRQF_PERCPU | IRQF_TIMER; + + /* Only have 4 general purpose timers, and we use last one as hpt */ + BUG_ON(cpu > 2); + + sprintf(name, "sb1250-counter-%d", cpu); + cd->name = name; + cd->features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT; + clockevent_set_clock(cd, V_SCD_TIMER_FREQ); + cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd); + cd->max_delta_ticks = 0x7fffff; + cd->min_delta_ns = clockevent_delta2ns(2, cd); + cd->min_delta_ticks = 2; + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of(cpu); + cd->set_next_event = sibyte_next_event; + cd->set_state_shutdown = sibyte_shutdown; + cd->set_state_periodic = sibyte_set_periodic; + cd->set_state_oneshot = sibyte_shutdown; + clockevents_register_device(cd); + + sb1250_mask_irq(cpu, irq); + + /* + * Map the timer interrupt to IP[4] of this cpu + */ + __raw_writeq(IMR_IP4_VAL, + IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) + + (irq << 3))); + + sb1250_unmask_irq(cpu, irq); + + irq_set_affinity(irq, cpumask_of(cpu)); + if (request_irq(irq, sibyte_counter_handler, flags, name, cd)) + pr_err("Failed to request irq %d (%s)\n", irq, name); +} diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c new file mode 100644 index 000000000..5709469c2 --- /dev/null +++ b/arch/mips/kernel/cevt-txx9.c @@ -0,0 +1,220 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Based on linux/arch/mips/kernel/cevt-r4k.c, + * linux/arch/mips/jmr3927/rbhma3100/setup.c + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 MIPS Technologies, Inc. + * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sched_clock.h> +#include <asm/time.h> +#include <asm/txx9tmr.h> + +#define TCR_BASE (TXx9_TMTCR_CCDE | TXx9_TMTCR_CRE | TXx9_TMTCR_TMODE_ITVL) +#define TIMER_CCD 0 /* 1/2 */ +#define TIMER_CLK(imclk) ((imclk) / (2 << TIMER_CCD)) + +struct txx9_clocksource { + struct clocksource cs; + struct txx9_tmr_reg __iomem *tmrptr; +}; + +static u64 txx9_cs_read(struct clocksource *cs) +{ + struct txx9_clocksource *txx9_cs = + container_of(cs, struct txx9_clocksource, cs); + return __raw_readl(&txx9_cs->tmrptr->trr); +} + +/* Use 1 bit smaller width to use full bits in that width */ +#define TXX9_CLOCKSOURCE_BITS (TXX9_TIMER_BITS - 1) + +static struct txx9_clocksource txx9_clocksource = { + .cs = { + .name = "TXx9", + .rating = 200, + .read = txx9_cs_read, + .mask = CLOCKSOURCE_MASK(TXX9_CLOCKSOURCE_BITS), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + }, +}; + +static u64 notrace txx9_read_sched_clock(void) +{ + return __raw_readl(&txx9_clocksource.tmrptr->trr); +} + +void __init txx9_clocksource_init(unsigned long baseaddr, + unsigned int imbusclk) +{ + struct txx9_tmr_reg __iomem *tmrptr; + + clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk)); + + tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); + __raw_writel(TCR_BASE, &tmrptr->tcr); + __raw_writel(0, &tmrptr->tisr); + __raw_writel(TIMER_CCD, &tmrptr->ccdr); + __raw_writel(TXx9_TMITMR_TZCE, &tmrptr->itmr); + __raw_writel(1 << TXX9_CLOCKSOURCE_BITS, &tmrptr->cpra); + __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr); + txx9_clocksource.tmrptr = tmrptr; + + sched_clock_register(txx9_read_sched_clock, TXX9_CLOCKSOURCE_BITS, + TIMER_CLK(imbusclk)); +} + +struct txx9_clock_event_device { + struct clock_event_device cd; + struct txx9_tmr_reg __iomem *tmrptr; +}; + +static void txx9tmr_stop_and_clear(struct txx9_tmr_reg __iomem *tmrptr) +{ + /* stop and reset counter */ + __raw_writel(TCR_BASE, &tmrptr->tcr); + /* clear pending interrupt */ + __raw_writel(0, &tmrptr->tisr); +} + +static int txx9tmr_set_state_periodic(struct clock_event_device *evt) +{ + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; + + txx9tmr_stop_and_clear(tmrptr); + + __raw_writel(TXx9_TMITMR_TIIE | TXx9_TMITMR_TZCE, &tmrptr->itmr); + /* start timer */ + __raw_writel(((u64)(NSEC_PER_SEC / HZ) * evt->mult) >> evt->shift, + &tmrptr->cpra); + __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr); + return 0; +} + +static int txx9tmr_set_state_oneshot(struct clock_event_device *evt) +{ + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; + + txx9tmr_stop_and_clear(tmrptr); + __raw_writel(TXx9_TMITMR_TIIE, &tmrptr->itmr); + return 0; +} + +static int txx9tmr_set_state_shutdown(struct clock_event_device *evt) +{ + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; + + txx9tmr_stop_and_clear(tmrptr); + __raw_writel(0, &tmrptr->itmr); + return 0; +} + +static int txx9tmr_tick_resume(struct clock_event_device *evt) +{ + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; + + txx9tmr_stop_and_clear(tmrptr); + __raw_writel(TIMER_CCD, &tmrptr->ccdr); + __raw_writel(0, &tmrptr->itmr); + return 0; +} + +static int txx9tmr_set_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + struct txx9_clock_event_device *txx9_cd = + container_of(evt, struct txx9_clock_event_device, cd); + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; + + txx9tmr_stop_and_clear(tmrptr); + /* start timer */ + __raw_writel(delta, &tmrptr->cpra); + __raw_writel(TCR_BASE | TXx9_TMTCR_TCE, &tmrptr->tcr); + return 0; +} + +static struct txx9_clock_event_device txx9_clock_event_device = { + .cd = { + .name = "TXx9", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_state_shutdown = txx9tmr_set_state_shutdown, + .set_state_periodic = txx9tmr_set_state_periodic, + .set_state_oneshot = txx9tmr_set_state_oneshot, + .tick_resume = txx9tmr_tick_resume, + .set_next_event = txx9tmr_set_next_event, + }, +}; + +static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) +{ + struct txx9_clock_event_device *txx9_cd = dev_id; + struct clock_event_device *cd = &txx9_cd->cd; + struct txx9_tmr_reg __iomem *tmrptr = txx9_cd->tmrptr; + + __raw_writel(0, &tmrptr->tisr); /* ack interrupt */ + cd->event_handler(cd); + return IRQ_HANDLED; +} + +void __init txx9_clockevent_init(unsigned long baseaddr, int irq, + unsigned int imbusclk) +{ + struct clock_event_device *cd = &txx9_clock_event_device.cd; + struct txx9_tmr_reg __iomem *tmrptr; + + tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); + txx9tmr_stop_and_clear(tmrptr); + __raw_writel(TIMER_CCD, &tmrptr->ccdr); + __raw_writel(0, &tmrptr->itmr); + txx9_clock_event_device.tmrptr = tmrptr; + + clockevent_set_clock(cd, TIMER_CLK(imbusclk)); + cd->max_delta_ns = + clockevent_delta2ns(0xffffffff >> (32 - TXX9_TIMER_BITS), cd); + cd->max_delta_ticks = 0xffffffff >> (32 - TXX9_TIMER_BITS); + cd->min_delta_ns = clockevent_delta2ns(0xf, cd); + cd->min_delta_ticks = 0xf; + cd->irq = irq; + cd->cpumask = cpumask_of(0), + clockevents_register_device(cd); + if (request_irq(irq, txx9tmr_interrupt, IRQF_PERCPU | IRQF_TIMER, + "txx9tmr", &txx9_clock_event_device)) + pr_err("Failed to request irq %d (txx9tmr)\n", irq); + printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n", + baseaddr, irq); +} + +void __init txx9_tmr_init(unsigned long baseaddr) +{ + struct txx9_tmr_reg __iomem *tmrptr; + + tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); + /* Start once to make CounterResetEnable effective */ + __raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr); + /* Stop and reset the counter */ + __raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr); + __raw_writel(0, &tmrptr->tisr); + __raw_writel(0xffffffff, &tmrptr->cpra); + __raw_writel(0, &tmrptr->itmr); + __raw_writel(0, &tmrptr->ccdr); + __raw_writel(0, &tmrptr->pgmr); + iounmap(tmrptr); +} diff --git a/arch/mips/kernel/cmpxchg.c b/arch/mips/kernel/cmpxchg.c new file mode 100644 index 000000000..89107deb0 --- /dev/null +++ b/arch/mips/kernel/cmpxchg.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2017 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <linux/bitops.h> +#include <asm/cmpxchg.h> + +unsigned long __xchg_small(volatile void *ptr, unsigned long val, unsigned int size) +{ + u32 old32, new32, load32, mask; + volatile u32 *ptr32; + unsigned int shift; + + /* Check that ptr is naturally aligned */ + WARN_ON((unsigned long)ptr & (size - 1)); + + /* Mask value to the correct size. */ + mask = GENMASK((size * BITS_PER_BYTE) - 1, 0); + val &= mask; + + /* + * Calculate a shift & mask that correspond to the value we wish to + * exchange within the naturally aligned 4 byte integerthat includes + * it. + */ + shift = (unsigned long)ptr & 0x3; + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + shift ^= sizeof(u32) - size; + shift *= BITS_PER_BYTE; + mask <<= shift; + + /* + * Calculate a pointer to the naturally aligned 4 byte integer that + * includes our byte of interest, and load its value. + */ + ptr32 = (volatile u32 *)((unsigned long)ptr & ~0x3); + load32 = *ptr32; + + do { + old32 = load32; + new32 = (load32 & ~mask) | (val << shift); + load32 = cmpxchg(ptr32, old32, new32); + } while (load32 != old32); + + return (load32 & mask) >> shift; +} + +unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old, + unsigned long new, unsigned int size) +{ + u32 mask, old32, new32, load32, load; + volatile u32 *ptr32; + unsigned int shift; + + /* Check that ptr is naturally aligned */ + WARN_ON((unsigned long)ptr & (size - 1)); + + /* Mask inputs to the correct size. */ + mask = GENMASK((size * BITS_PER_BYTE) - 1, 0); + old &= mask; + new &= mask; + + /* + * Calculate a shift & mask that correspond to the value we wish to + * compare & exchange within the naturally aligned 4 byte integer + * that includes it. + */ + shift = (unsigned long)ptr & 0x3; + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + shift ^= sizeof(u32) - size; + shift *= BITS_PER_BYTE; + mask <<= shift; + + /* + * Calculate a pointer to the naturally aligned 4 byte integer that + * includes our byte of interest, and load its value. + */ + ptr32 = (volatile u32 *)((unsigned long)ptr & ~0x3); + load32 = *ptr32; + + while (true) { + /* + * Ensure the byte we want to exchange matches the expected + * old value, and if not then bail. + */ + load = (load32 & mask) >> shift; + if (load != old) + return load; + + /* + * Calculate the old & new values of the naturally aligned + * 4 byte integer that include the byte we want to exchange. + * Attempt to exchange the old value for the new value, and + * return if we succeed. + */ + old32 = (load32 & ~mask) | (old << shift); + new32 = (load32 & ~mask) | (new << shift); + load32 = cmpxchg(ptr32, old32, new32); + if (load32 == old32) + return old; + } +} diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S new file mode 100644 index 000000000..30725e1df --- /dev/null +++ b/arch/mips/kernel/cps-vec-ns16550.S @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <linux/serial_reg.h> + +#define UART_TX_OFS (UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT) +#define UART_LSR_OFS (UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT) + +#if CONFIG_MIPS_CPS_NS16550_WIDTH == 1 +# define UART_L lb +# define UART_S sb +#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 2 +# define UART_L lh +# define UART_S sh +#elif CONFIG_MIPS_CPS_NS16550_WIDTH == 4 +# define UART_L lw +# define UART_S sw +#else +# define UART_L lb +# define UART_S sb +#endif + +/** + * _mips_cps_putc() - write a character to the UART + * @a0: ASCII character to write + * @t9: UART base address + */ +LEAF(_mips_cps_putc) +1: UART_L t0, UART_LSR_OFS(t9) + andi t0, t0, UART_LSR_TEMT + beqz t0, 1b + UART_S a0, UART_TX_OFS(t9) + jr ra + END(_mips_cps_putc) + +/** + * _mips_cps_puts() - write a string to the UART + * @a0: pointer to NULL-terminated ASCII string + * @t9: UART base address + * + * Write a null-terminated ASCII string to the UART. + */ +NESTED(_mips_cps_puts, 0, ra) + move s7, ra + move s6, a0 + +1: lb a0, 0(s6) + beqz a0, 2f + jal _mips_cps_putc + PTR_ADDIU s6, s6, 1 + b 1b + +2: jr s7 + END(_mips_cps_puts) + +/** + * _mips_cps_putx4 - write a 4b hex value to the UART + * @a0: the 4b value to write to the UART + * @t9: UART base address + * + * Write a single hexadecimal character to the UART. + */ +NESTED(_mips_cps_putx4, 0, ra) + andi a0, a0, 0xf + li t0, '0' + blt a0, 10, 1f + li t0, 'a' + addiu a0, a0, -10 +1: addu a0, a0, t0 + b _mips_cps_putc + END(_mips_cps_putx4) + +/** + * _mips_cps_putx8 - write an 8b hex value to the UART + * @a0: the 8b value to write to the UART + * @t9: UART base address + * + * Write an 8 bit value (ie. 2 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx8, 0, ra) + move s3, ra + move s2, a0 + srl a0, a0, 4 + jal _mips_cps_putx4 + move a0, s2 + move ra, s3 + b _mips_cps_putx4 + END(_mips_cps_putx8) + +/** + * _mips_cps_putx16 - write a 16b hex value to the UART + * @a0: the 16b value to write to the UART + * @t9: UART base address + * + * Write a 16 bit value (ie. 4 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx16, 0, ra) + move s5, ra + move s4, a0 + srl a0, a0, 8 + jal _mips_cps_putx8 + move a0, s4 + move ra, s5 + b _mips_cps_putx8 + END(_mips_cps_putx16) + +/** + * _mips_cps_putx32 - write a 32b hex value to the UART + * @a0: the 32b value to write to the UART + * @t9: UART base address + * + * Write a 32 bit value (ie. 8 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx32, 0, ra) + move s7, ra + move s6, a0 + srl a0, a0, 16 + jal _mips_cps_putx16 + move a0, s6 + move ra, s7 + b _mips_cps_putx16 + END(_mips_cps_putx32) + +#ifdef CONFIG_64BIT + +/** + * _mips_cps_putx64 - write a 64b hex value to the UART + * @a0: the 64b value to write to the UART + * @t9: UART base address + * + * Write a 64 bit value (ie. 16 hexadecimal characters) to the UART. + */ +NESTED(_mips_cps_putx64, 0, ra) + move sp, ra + move s8, a0 + dsrl32 a0, a0, 0 + jal _mips_cps_putx32 + move a0, s8 + move ra, sp + b _mips_cps_putx32 + END(_mips_cps_putx64) + +#define _mips_cps_putxlong _mips_cps_putx64 + +#else /* !CONFIG_64BIT */ + +#define _mips_cps_putxlong _mips_cps_putx32 + +#endif /* !CONFIG_64BIT */ + +/** + * mips_cps_bev_dump() - dump relevant exception state to UART + * @a0: pointer to NULL-terminated ASCII string naming the exception + * + * Write information that may be useful in debugging an exception to the + * UART configured by CONFIG_MIPS_CPS_NS16550_*. As this BEV exception + * will only be run if something goes horribly wrong very early during + * the bringup of a core and it is very likely to be unsafe to perform + * memory accesses at that point (cache state indeterminate, EVA may not + * be configured, coherence may be disabled) let alone have a stack, + * this is all written in assembly using only registers & unmapped + * uncached access to the UART registers. + */ +LEAF(mips_cps_bev_dump) + move s0, ra + move s1, a0 + + li t9, CKSEG1ADDR(CONFIG_MIPS_CPS_NS16550_BASE) + + PTR_LA a0, str_newline + jal _mips_cps_puts + PTR_LA a0, str_bev + jal _mips_cps_puts + move a0, s1 + jal _mips_cps_puts + PTR_LA a0, str_newline + jal _mips_cps_puts + PTR_LA a0, str_newline + jal _mips_cps_puts + +#define DUMP_COP0_REG(reg, name, sz, _mfc0) \ + PTR_LA a0, 8f; \ + jal _mips_cps_puts; \ + _mfc0 a0, reg; \ + jal _mips_cps_putx##sz; \ + PTR_LA a0, str_newline; \ + jal _mips_cps_puts; \ + TEXT(name) + + DUMP_COP0_REG(CP0_CAUSE, "Cause: 0x", 32, mfc0) + DUMP_COP0_REG(CP0_STATUS, "Status: 0x", 32, mfc0) + DUMP_COP0_REG(CP0_EBASE, "EBase: 0x", long, MFC0) + DUMP_COP0_REG(CP0_BADVADDR, "BadVAddr: 0x", long, MFC0) + DUMP_COP0_REG(CP0_BADINSTR, "BadInstr: 0x", 32, mfc0) + + PTR_LA a0, str_newline + jal _mips_cps_puts + jr s0 + END(mips_cps_bev_dump) + +.pushsection .data +str_bev: .asciiz "BEV Exception: " +str_newline: .asciiz "\r\n" +.popsection diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S new file mode 100644 index 000000000..4db7ff055 --- /dev/null +++ b/arch/mips/kernel/cps-vec.S @@ -0,0 +1,630 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/eva.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/pm.h> + +#define GCR_CPC_BASE_OFS 0x0088 +#define GCR_CL_COHERENCE_OFS 0x2008 +#define GCR_CL_ID_OFS 0x2028 + +#define CPC_CL_VC_STOP_OFS 0x2020 +#define CPC_CL_VC_RUN_OFS 0x2028 + +.extern mips_cm_base + +.set noreorder + +#ifdef CONFIG_64BIT +# define STATUS_BITDEPS ST0_KX +#else +# define STATUS_BITDEPS 0 +#endif + +#ifdef CONFIG_MIPS_CPS_NS16550 + +#define DUMP_EXCEP(name) \ + PTR_LA a0, 8f; \ + jal mips_cps_bev_dump; \ + nop; \ + TEXT(name) + +#else /* !CONFIG_MIPS_CPS_NS16550 */ + +#define DUMP_EXCEP(name) + +#endif /* !CONFIG_MIPS_CPS_NS16550 */ + + /* + * Set dest to non-zero if the core supports the MT ASE, else zero. If + * MT is not supported then branch to nomt. + */ + .macro has_mt dest, nomt + mfc0 \dest, CP0_CONFIG, 1 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 2 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 3 + andi \dest, \dest, MIPS_CONF3_MT + beqz \dest, \nomt + nop + .endm + + /* + * Set dest to non-zero if the core supports MIPSr6 multithreading + * (ie. VPs), else zero. If MIPSr6 multithreading is not supported then + * branch to nomt. + */ + .macro has_vp dest, nomt + mfc0 \dest, CP0_CONFIG, 1 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 2 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 3 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 4 + bgez \dest, \nomt + mfc0 \dest, CP0_CONFIG, 5 + andi \dest, \dest, MIPS_CONF5_VP + beqz \dest, \nomt + nop + .endm + + /* Calculate an uncached address for the CM GCRs */ + .macro cmgcrb dest + .set push + .set noat + MFC0 $1, CP0_CMGCRBASE + PTR_SLL $1, $1, 4 + PTR_LI \dest, UNCAC_BASE + PTR_ADDU \dest, \dest, $1 + .set pop + .endm + +.section .text.cps-vec +.balign 0x1000 + +LEAF(mips_cps_core_entry) + /* + * These first 4 bytes will be patched by cps_smp_setup to load the + * CCA to use into register s0. + */ + .word 0 + + /* Check whether we're here due to an NMI */ + mfc0 k0, CP0_STATUS + and k0, k0, ST0_NMI + beqz k0, not_nmi + nop + + /* This is an NMI */ + PTR_LA k0, nmi_handler + jr k0 + nop + +not_nmi: + /* Setup Cause */ + li t0, CAUSEF_IV + mtc0 t0, CP0_CAUSE + + /* Setup Status */ + li t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS + mtc0 t0, CP0_STATUS + + /* Skip cache & coherence setup if we're already coherent */ + cmgcrb v1 + lw s7, GCR_CL_COHERENCE_OFS(v1) + bnez s7, 1f + nop + + /* Initialize the L1 caches */ + jal mips_cps_cache_init + nop + + /* Enter the coherent domain */ + li t0, 0xff + sw t0, GCR_CL_COHERENCE_OFS(v1) + ehb + + /* Set Kseg0 CCA to that in s0 */ +1: mfc0 t0, CP0_CONFIG + ori t0, 0x7 + xori t0, 0x7 + or t0, t0, s0 + mtc0 t0, CP0_CONFIG + ehb + + /* Jump to kseg0 */ + PTR_LA t0, 1f + jr t0 + nop + + /* + * We're up, cached & coherent. Perform any EVA initialization necessary + * before we access memory. + */ +1: eva_init + + /* Retrieve boot configuration pointers */ + jal mips_cps_get_bootcfg + nop + + /* Skip core-level init if we started up coherent */ + bnez s7, 1f + nop + + /* Perform any further required core-level initialisation */ + jal mips_cps_core_init + nop + + /* + * Boot any other VPEs within this core that should be online, and + * deactivate this VPE if it should be offline. + */ + move a1, t9 + jal mips_cps_boot_vpes + move a0, v0 + + /* Off we go! */ +1: PTR_L t1, VPEBOOTCFG_PC(v1) + PTR_L gp, VPEBOOTCFG_GP(v1) + PTR_L sp, VPEBOOTCFG_SP(v1) + jr t1 + nop + END(mips_cps_core_entry) + +.org 0x200 +LEAF(excep_tlbfill) + DUMP_EXCEP("TLB Fill") + b . + nop + END(excep_tlbfill) + +.org 0x280 +LEAF(excep_xtlbfill) + DUMP_EXCEP("XTLB Fill") + b . + nop + END(excep_xtlbfill) + +.org 0x300 +LEAF(excep_cache) + DUMP_EXCEP("Cache") + b . + nop + END(excep_cache) + +.org 0x380 +LEAF(excep_genex) + DUMP_EXCEP("General") + b . + nop + END(excep_genex) + +.org 0x400 +LEAF(excep_intex) + DUMP_EXCEP("Interrupt") + b . + nop + END(excep_intex) + +.org 0x480 +LEAF(excep_ejtag) + PTR_LA k0, ejtag_debug_handler + jr k0 + nop + END(excep_ejtag) + +LEAF(mips_cps_core_init) +#ifdef CONFIG_MIPS_MT_SMP + /* Check that the core implements the MT ASE */ + has_mt t0, 3f + + .set push + .set MIPS_ISA_LEVEL_RAW + .set mt + + /* Only allow 1 TC per VPE to execute... */ + dmt + + /* ...and for the moment only 1 VPE */ + dvpe + PTR_LA t1, 1f + jr.hb t1 + nop + + /* Enter VPE configuration state */ +1: mfc0 t0, CP0_MVPCONTROL + ori t0, t0, MVPCONTROL_VPC + mtc0 t0, CP0_MVPCONTROL + + /* Retrieve the number of VPEs within the core */ + mfc0 t0, CP0_MVPCONF0 + srl t0, t0, MVPCONF0_PVPE_SHIFT + andi t0, t0, (MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT) + addiu ta3, t0, 1 + + /* If there's only 1, we're done */ + beqz t0, 2f + nop + + /* Loop through each VPE within this core */ + li ta1, 1 + +1: /* Operate on the appropriate TC */ + mtc0 ta1, CP0_VPECONTROL + ehb + + /* Bind TC to VPE (1:1 TC:VPE mapping) */ + mttc0 ta1, CP0_TCBIND + + /* Set exclusive TC, non-active, master */ + li t0, VPECONF0_MVP + sll t1, ta1, VPECONF0_XTC_SHIFT + or t0, t0, t1 + mttc0 t0, CP0_VPECONF0 + + /* Set TC non-active, non-allocatable */ + mttc0 zero, CP0_TCSTATUS + + /* Set TC halted */ + li t0, TCHALT_H + mttc0 t0, CP0_TCHALT + + /* Next VPE */ + addiu ta1, ta1, 1 + slt t0, ta1, ta3 + bnez t0, 1b + nop + + /* Leave VPE configuration state */ +2: mfc0 t0, CP0_MVPCONTROL + xori t0, t0, MVPCONTROL_VPC + mtc0 t0, CP0_MVPCONTROL + +3: .set pop +#endif + jr ra + nop + END(mips_cps_core_init) + +/** + * mips_cps_get_bootcfg() - retrieve boot configuration pointers + * + * Returns: pointer to struct core_boot_config in v0, pointer to + * struct vpe_boot_config in v1, VPE ID in t9 + */ +LEAF(mips_cps_get_bootcfg) + /* Calculate a pointer to this cores struct core_boot_config */ + cmgcrb t0 + lw t0, GCR_CL_ID_OFS(t0) + li t1, COREBOOTCFG_SIZE + mul t0, t0, t1 + PTR_LA t1, mips_cps_core_bootcfg + PTR_L t1, 0(t1) + PTR_ADDU v0, t0, t1 + + /* Calculate this VPEs ID. If the core doesn't support MT use 0 */ + li t9, 0 +#if defined(CONFIG_CPU_MIPSR6) + has_vp ta2, 1f + + /* + * Assume non-contiguous numbering. Perhaps some day we'll need + * to handle contiguous VP numbering, but no such systems yet + * exist. + */ + mfc0 t9, CP0_GLOBALNUMBER + andi t9, t9, MIPS_GLOBALNUMBER_VP +#elif defined(CONFIG_MIPS_MT_SMP) + has_mt ta2, 1f + + /* Find the number of VPEs present in the core */ + mfc0 t1, CP0_MVPCONF0 + srl t1, t1, MVPCONF0_PVPE_SHIFT + andi t1, t1, MVPCONF0_PVPE >> MVPCONF0_PVPE_SHIFT + addiu t1, t1, 1 + + /* Calculate a mask for the VPE ID from EBase.CPUNum */ + clz t1, t1 + li t2, 31 + subu t1, t2, t1 + li t2, 1 + sll t1, t2, t1 + addiu t1, t1, -1 + + /* Retrieve the VPE ID from EBase.CPUNum */ + mfc0 t9, $15, 1 + and t9, t9, t1 +#endif + +1: /* Calculate a pointer to this VPEs struct vpe_boot_config */ + li t1, VPEBOOTCFG_SIZE + mul v1, t9, t1 + PTR_L ta3, COREBOOTCFG_VPECONFIG(v0) + PTR_ADDU v1, v1, ta3 + + jr ra + nop + END(mips_cps_get_bootcfg) + +LEAF(mips_cps_boot_vpes) + lw ta2, COREBOOTCFG_VPEMASK(a0) + PTR_L ta3, COREBOOTCFG_VPECONFIG(a0) + +#if defined(CONFIG_CPU_MIPSR6) + + has_vp t0, 5f + + /* Find base address of CPC */ + cmgcrb t3 + PTR_L t1, GCR_CPC_BASE_OFS(t3) + PTR_LI t2, ~0x7fff + and t1, t1, t2 + PTR_LI t2, UNCAC_BASE + PTR_ADD t1, t1, t2 + + /* Start any other VPs that ought to be running */ + PTR_S ta2, CPC_CL_VC_RUN_OFS(t1) + + /* Ensure this VP stops running if it shouldn't be */ + not ta2 + PTR_S ta2, CPC_CL_VC_STOP_OFS(t1) + ehb + +#elif defined(CONFIG_MIPS_MT) + + /* If the core doesn't support MT then return */ + has_mt t0, 5f + + /* Enter VPE configuration state */ + .set push + .set MIPS_ISA_LEVEL_RAW + .set mt + dvpe + .set pop + + PTR_LA t1, 1f + jr.hb t1 + nop +1: mfc0 t1, CP0_MVPCONTROL + ori t1, t1, MVPCONTROL_VPC + mtc0 t1, CP0_MVPCONTROL + ehb + + /* Loop through each VPE */ + move t8, ta2 + li ta1, 0 + + /* Check whether the VPE should be running. If not, skip it */ +1: andi t0, ta2, 1 + beqz t0, 2f + nop + + /* Operate on the appropriate TC */ + mfc0 t0, CP0_VPECONTROL + ori t0, t0, VPECONTROL_TARGTC + xori t0, t0, VPECONTROL_TARGTC + or t0, t0, ta1 + mtc0 t0, CP0_VPECONTROL + ehb + + .set push + .set MIPS_ISA_LEVEL_RAW + .set mt + + /* Skip the VPE if its TC is not halted */ + mftc0 t0, CP0_TCHALT + beqz t0, 2f + nop + + /* Calculate a pointer to the VPEs struct vpe_boot_config */ + li t0, VPEBOOTCFG_SIZE + mul t0, t0, ta1 + addu t0, t0, ta3 + + /* Set the TC restart PC */ + lw t1, VPEBOOTCFG_PC(t0) + mttc0 t1, CP0_TCRESTART + + /* Set the TC stack pointer */ + lw t1, VPEBOOTCFG_SP(t0) + mttgpr t1, sp + + /* Set the TC global pointer */ + lw t1, VPEBOOTCFG_GP(t0) + mttgpr t1, gp + + /* Copy config from this VPE */ + mfc0 t0, CP0_CONFIG + mttc0 t0, CP0_CONFIG + + /* + * Copy the EVA config from this VPE if the CPU supports it. + * CONFIG3 must exist to be running MT startup - just read it. + */ + mfc0 t0, CP0_CONFIG, 3 + and t0, t0, MIPS_CONF3_SC + beqz t0, 3f + nop + mfc0 t0, CP0_SEGCTL0 + mttc0 t0, CP0_SEGCTL0 + mfc0 t0, CP0_SEGCTL1 + mttc0 t0, CP0_SEGCTL1 + mfc0 t0, CP0_SEGCTL2 + mttc0 t0, CP0_SEGCTL2 +3: + /* Ensure no software interrupts are pending */ + mttc0 zero, CP0_CAUSE + mttc0 zero, CP0_STATUS + + /* Set TC active, not interrupt exempt */ + mftc0 t0, CP0_TCSTATUS + li t1, ~TCSTATUS_IXMT + and t0, t0, t1 + ori t0, t0, TCSTATUS_A + mttc0 t0, CP0_TCSTATUS + + /* Clear the TC halt bit */ + mttc0 zero, CP0_TCHALT + + /* Set VPE active */ + mftc0 t0, CP0_VPECONF0 + ori t0, t0, VPECONF0_VPA + mttc0 t0, CP0_VPECONF0 + + /* Next VPE */ +2: srl ta2, ta2, 1 + addiu ta1, ta1, 1 + bnez ta2, 1b + nop + + /* Leave VPE configuration state */ + mfc0 t1, CP0_MVPCONTROL + xori t1, t1, MVPCONTROL_VPC + mtc0 t1, CP0_MVPCONTROL + ehb + evpe + + .set pop + + /* Check whether this VPE is meant to be running */ + li t0, 1 + sll t0, t0, a1 + and t0, t0, t8 + bnez t0, 2f + nop + + /* This VPE should be offline, halt the TC */ + li t0, TCHALT_H + mtc0 t0, CP0_TCHALT + PTR_LA t0, 1f +1: jr.hb t0 + nop + +2: + +#endif /* CONFIG_MIPS_MT_SMP */ + + /* Return */ +5: jr ra + nop + END(mips_cps_boot_vpes) + +LEAF(mips_cps_cache_init) + /* + * Clear the bits used to index the caches. Note that the architecture + * dictates that writing to any of TagLo or TagHi selects 0 or 2 should + * be valid for all MIPS32 CPUs, even those for which said writes are + * unnecessary. + */ + mtc0 zero, CP0_TAGLO, 0 + mtc0 zero, CP0_TAGHI, 0 + mtc0 zero, CP0_TAGLO, 2 + mtc0 zero, CP0_TAGHI, 2 + ehb + + /* Primary cache configuration is indicated by Config1 */ + mfc0 v0, CP0_CONFIG, 1 + + /* Detect I-cache line size */ + _EXT t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ + beqz t0, icache_done + li t1, 2 + sllv t0, t1, t0 + + /* Detect I-cache size */ + _EXT t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ + xori t2, t1, 0x7 + beqz t2, 1f + li t3, 32 + addiu t1, t1, 1 + sllv t1, t3, t1 +1: /* At this point t1 == I-cache sets per way */ + _EXT t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ + addiu t2, t2, 1 + mul t1, t1, t0 + mul t1, t1, t2 + + li a0, CKSEG0 + PTR_ADD a1, a0, t1 +1: cache Index_Store_Tag_I, 0(a0) + PTR_ADD a0, a0, t0 + bne a0, a1, 1b + nop +icache_done: + + /* Detect D-cache line size */ + _EXT t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ + beqz t0, dcache_done + li t1, 2 + sllv t0, t1, t0 + + /* Detect D-cache size */ + _EXT t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ + xori t2, t1, 0x7 + beqz t2, 1f + li t3, 32 + addiu t1, t1, 1 + sllv t1, t3, t1 +1: /* At this point t1 == D-cache sets per way */ + _EXT t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ + addiu t2, t2, 1 + mul t1, t1, t0 + mul t1, t1, t2 + + li a0, CKSEG0 + PTR_ADDU a1, a0, t1 + PTR_SUBU a1, a1, t0 +1: cache Index_Store_Tag_D, 0(a0) + bne a0, a1, 1b + PTR_ADD a0, a0, t0 +dcache_done: + + jr ra + nop + END(mips_cps_cache_init) + +#if defined(CONFIG_MIPS_CPS_PM) && defined(CONFIG_CPU_PM) + + /* Calculate a pointer to this CPUs struct mips_static_suspend_state */ + .macro psstate dest + .set push + .set noat + lw $1, TI_CPU(gp) + sll $1, $1, LONGLOG + PTR_LA \dest, __per_cpu_offset + addu $1, $1, \dest + lw $1, 0($1) + PTR_LA \dest, cps_cpu_state + addu \dest, \dest, $1 + .set pop + .endm + +LEAF(mips_cps_pm_save) + /* Save CPU state */ + SUSPEND_SAVE_REGS + psstate t1 + SUSPEND_SAVE_STATIC + jr v0 + nop + END(mips_cps_pm_save) + +LEAF(mips_cps_pm_restore) + /* Restore CPU state */ + psstate t1 + RESUME_RESTORE_STATIC + RESUME_RESTORE_REGS_RETURN + END(mips_cps_pm_restore) + +#endif /* CONFIG_MIPS_CPS_PM && CONFIG_CPU_PM */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c new file mode 100644 index 000000000..f8d1933bf --- /dev/null +++ b/arch/mips/kernel/cpu-probe.c @@ -0,0 +1,2170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Processor capabilities determination functions. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/smp.h> +#include <linux/stddef.h> +#include <linux/export.h> + +#include <asm/bugs.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/cpu-type.h> +#include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/msa.h> +#include <asm/watch.h> +#include <asm/elf.h> +#include <asm/pgtable-bits.h> +#include <asm/spram.h> +#include <linux/uaccess.h> + +#include "fpu-probe.h" + +#include <asm/mach-loongson64/cpucfg-emul.h> + +/* Hardware capabilities */ +unsigned int elf_hwcap __read_mostly; +EXPORT_SYMBOL_GPL(elf_hwcap); + +static inline unsigned long cpu_get_msa_id(void) +{ + unsigned long status, msa_id; + + status = read_c0_status(); + __enable_fpu(FPU_64BIT); + enable_msa(); + msa_id = read_msa_ir(); + disable_msa(); + write_c0_status(status); + return msa_id; +} + +static int mips_dsp_disabled; + +static int __init dsp_disable(char *s) +{ + cpu_data[0].ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P); + mips_dsp_disabled = 1; + + return 1; +} + +__setup("nodsp", dsp_disable); + +static int mips_htw_disabled; + +static int __init htw_disable(char *s) +{ + mips_htw_disabled = 1; + cpu_data[0].options &= ~MIPS_CPU_HTW; + write_c0_pwctl(read_c0_pwctl() & + ~(1 << MIPS_PWCTL_PWEN_SHIFT)); + + return 1; +} + +__setup("nohtw", htw_disable); + +static int mips_ftlb_disabled; +static int mips_has_ftlb_configured; + +enum ftlb_flags { + FTLB_EN = 1 << 0, + FTLB_SET_PROB = 1 << 1, +}; + +static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags); + +static int __init ftlb_disable(char *s) +{ + unsigned int config4, mmuextdef; + + /* + * If the core hasn't done any FTLB configuration, there is nothing + * for us to do here. + */ + if (!mips_has_ftlb_configured) + return 1; + + /* Disable it in the boot cpu */ + if (set_ftlb_enable(&cpu_data[0], 0)) { + pr_warn("Can't turn FTLB off\n"); + return 1; + } + + config4 = read_c0_config4(); + + /* Check that FTLB has been disabled */ + mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; + /* MMUSIZEEXT == VTLB ON, FTLB OFF */ + if (mmuextdef == MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT) { + /* This should never happen */ + pr_warn("FTLB could not be disabled!\n"); + return 1; + } + + mips_ftlb_disabled = 1; + mips_has_ftlb_configured = 0; + + /* + * noftlb is mainly used for debug purposes so print + * an informative message instead of using pr_debug() + */ + pr_info("FTLB has been disabled\n"); + + /* + * Some of these bits are duplicated in the decode_config4. + * MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT is the only possible case + * once FTLB has been disabled so undo what decode_config4 did. + */ + cpu_data[0].tlbsize -= cpu_data[0].tlbsizeftlbways * + cpu_data[0].tlbsizeftlbsets; + cpu_data[0].tlbsizeftlbsets = 0; + cpu_data[0].tlbsizeftlbways = 0; + + return 1; +} + +__setup("noftlb", ftlb_disable); + +/* + * Check if the CPU has per tc perf counters + */ +static inline void cpu_set_mt_per_tc_perf(struct cpuinfo_mips *c) +{ + if (read_c0_config7() & MTI_CONF7_PTC) + c->options |= MIPS_CPU_MT_PER_TC_PERF_COUNTERS; +} + +static inline void check_errata(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + switch (current_cpu_type()) { + case CPU_34K: + /* + * Erratum "RPS May Cause Incorrect Instruction Execution" + * This code only handles VPE0, any SMP/RTOS code + * making use of VPE1 will be responsable for that VPE. + */ + if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2) + write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS); + break; + default: + break; + } +} + +void __init check_bugs32(void) +{ + check_errata(); +} + +/* + * Probe whether cpu has config register by trying to play with + * alternate cache bit and see whether it matters. + * It's used by cpu_probe to distinguish between R3000A and R3081. + */ +static inline int cpu_has_confreg(void) +{ +#ifdef CONFIG_CPU_R3000 + extern unsigned long r3k_cache_size(unsigned long); + unsigned long size1, size2; + unsigned long cfg = read_c0_conf(); + + size1 = r3k_cache_size(ST0_ISC); + write_c0_conf(cfg ^ R30XX_CONF_AC); + size2 = r3k_cache_size(ST0_ISC); + write_c0_conf(cfg); + return size1 != size2; +#else + return 0; +#endif +} + +static inline void set_elf_platform(int cpu, const char *plat) +{ + if (cpu == 0) + __elf_platform = plat; +} + +static inline void set_elf_base_platform(const char *plat) +{ + if (__elf_base_platform == NULL) { + __elf_base_platform = plat; + } +} + +static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) +{ +#ifdef __NEED_VMBITS_PROBE + write_c0_entryhi(0x3fffffffffffe000ULL); + back_to_back_c0_hazard(); + c->vmbits = fls64(read_c0_entryhi() & 0x3fffffffffffe000ULL); +#endif +} + +static void set_isa(struct cpuinfo_mips *c, unsigned int isa) +{ + switch (isa) { + case MIPS_CPU_ISA_M64R5: + c->isa_level |= MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5; + set_elf_base_platform("mips64r5"); + fallthrough; + case MIPS_CPU_ISA_M64R2: + c->isa_level |= MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2; + set_elf_base_platform("mips64r2"); + fallthrough; + case MIPS_CPU_ISA_M64R1: + c->isa_level |= MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1; + set_elf_base_platform("mips64"); + fallthrough; + case MIPS_CPU_ISA_V: + c->isa_level |= MIPS_CPU_ISA_V; + set_elf_base_platform("mips5"); + fallthrough; + case MIPS_CPU_ISA_IV: + c->isa_level |= MIPS_CPU_ISA_IV; + set_elf_base_platform("mips4"); + fallthrough; + case MIPS_CPU_ISA_III: + c->isa_level |= MIPS_CPU_ISA_II | MIPS_CPU_ISA_III; + set_elf_base_platform("mips3"); + break; + + /* R6 incompatible with everything else */ + case MIPS_CPU_ISA_M64R6: + c->isa_level |= MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6; + set_elf_base_platform("mips64r6"); + fallthrough; + case MIPS_CPU_ISA_M32R6: + c->isa_level |= MIPS_CPU_ISA_M32R6; + set_elf_base_platform("mips32r6"); + /* Break here so we don't add incompatible ISAs */ + break; + case MIPS_CPU_ISA_M32R5: + c->isa_level |= MIPS_CPU_ISA_M32R5; + set_elf_base_platform("mips32r5"); + fallthrough; + case MIPS_CPU_ISA_M32R2: + c->isa_level |= MIPS_CPU_ISA_M32R2; + set_elf_base_platform("mips32r2"); + fallthrough; + case MIPS_CPU_ISA_M32R1: + c->isa_level |= MIPS_CPU_ISA_M32R1; + set_elf_base_platform("mips32"); + fallthrough; + case MIPS_CPU_ISA_II: + c->isa_level |= MIPS_CPU_ISA_II; + set_elf_base_platform("mips2"); + break; + } +} + +static char unknown_isa[] = KERN_ERR \ + "Unsupported ISA type, c0.config0: %d."; + +static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c) +{ + + unsigned int probability = c->tlbsize / c->tlbsizevtlb; + + /* + * 0 = All TLBWR instructions go to FTLB + * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the + * FTLB and 1 goes to the VTLB. + * 2 = 7:1: As above with 7:1 ratio. + * 3 = 3:1: As above with 3:1 ratio. + * + * Use the linear midpoint as the probability threshold. + */ + if (probability >= 12) + return 1; + else if (probability >= 6) + return 2; + else + /* + * So FTLB is less than 4 times bigger than VTLB. + * A 3:1 ratio can still be useful though. + */ + return 3; +} + +static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) +{ + unsigned int config; + + /* It's implementation dependent how the FTLB can be enabled */ + switch (c->cputype) { + case CPU_PROAPTIV: + case CPU_P5600: + case CPU_P6600: + /* proAptiv & related cores use Config6 to enable the FTLB */ + config = read_c0_config6(); + + if (flags & FTLB_EN) + config |= MTI_CONF6_FTLBEN; + else + config &= ~MTI_CONF6_FTLBEN; + + if (flags & FTLB_SET_PROB) { + config &= ~(3 << MTI_CONF6_FTLBP_SHIFT); + config |= calculate_ftlb_probability(c) + << MTI_CONF6_FTLBP_SHIFT; + } + + write_c0_config6(config); + back_to_back_c0_hazard(); + break; + case CPU_I6400: + case CPU_I6500: + /* There's no way to disable the FTLB */ + if (!(flags & FTLB_EN)) + return 1; + return 0; + case CPU_LOONGSON64: + /* Flush ITLB, DTLB, VTLB and FTLB */ + write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB | + LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB); + /* Loongson-3 cores use Config6 to enable the FTLB */ + config = read_c0_config6(); + if (flags & FTLB_EN) + /* Enable FTLB */ + write_c0_config6(config & ~LOONGSON_CONF6_FTLBDIS); + else + /* Disable FTLB */ + write_c0_config6(config | LOONGSON_CONF6_FTLBDIS); + break; + default: + return 1; + } + + return 0; +} + +static int mm_config(struct cpuinfo_mips *c) +{ + unsigned int config0, update, mm; + + config0 = read_c0_config(); + mm = config0 & MIPS_CONF_MM; + + /* + * It's implementation dependent what type of write-merge is supported + * and whether it can be enabled/disabled. If it is settable lets make + * the merging allowed by default. Some platforms might have + * write-through caching unsupported. In this case just ignore the + * CP0.Config.MM bit field value. + */ + switch (c->cputype) { + case CPU_24K: + case CPU_34K: + case CPU_74K: + case CPU_P5600: + case CPU_P6600: + c->options |= MIPS_CPU_MM_FULL; + update = MIPS_CONF_MM_FULL; + break; + case CPU_1004K: + case CPU_1074K: + case CPU_INTERAPTIV: + case CPU_PROAPTIV: + mm = 0; + fallthrough; + default: + update = 0; + break; + } + + if (update) { + config0 = (config0 & ~MIPS_CONF_MM) | update; + write_c0_config(config0); + } else if (mm == MIPS_CONF_MM_SYSAD) { + c->options |= MIPS_CPU_MM_SYSAD; + } else if (mm == MIPS_CONF_MM_FULL) { + c->options |= MIPS_CPU_MM_FULL; + } + + return 0; +} + +static inline unsigned int decode_config0(struct cpuinfo_mips *c) +{ + unsigned int config0; + int isa, mt; + + config0 = read_c0_config(); + + /* + * Look for Standard TLB or Dual VTLB and FTLB + */ + mt = config0 & MIPS_CONF_MT; + if (mt == MIPS_CONF_MT_TLB) + c->options |= MIPS_CPU_TLB; + else if (mt == MIPS_CONF_MT_FTLB) + c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB; + + isa = (config0 & MIPS_CONF_AT) >> 13; + switch (isa) { + case 0: + switch ((config0 & MIPS_CONF_AR) >> 10) { + case 0: + set_isa(c, MIPS_CPU_ISA_M32R1); + break; + case 1: + set_isa(c, MIPS_CPU_ISA_M32R2); + break; + case 2: + set_isa(c, MIPS_CPU_ISA_M32R6); + break; + default: + goto unknown; + } + break; + case 2: + switch ((config0 & MIPS_CONF_AR) >> 10) { + case 0: + set_isa(c, MIPS_CPU_ISA_M64R1); + break; + case 1: + set_isa(c, MIPS_CPU_ISA_M64R2); + break; + case 2: + set_isa(c, MIPS_CPU_ISA_M64R6); + break; + default: + goto unknown; + } + break; + default: + goto unknown; + } + + return config0 & MIPS_CONF_M; + +unknown: + panic(unknown_isa, config0); +} + +static inline unsigned int decode_config1(struct cpuinfo_mips *c) +{ + unsigned int config1; + + config1 = read_c0_config1(); + + if (config1 & MIPS_CONF1_MD) + c->ases |= MIPS_ASE_MDMX; + if (config1 & MIPS_CONF1_PC) + c->options |= MIPS_CPU_PERF; + if (config1 & MIPS_CONF1_WR) + c->options |= MIPS_CPU_WATCH; + if (config1 & MIPS_CONF1_CA) + c->ases |= MIPS_ASE_MIPS16; + if (config1 & MIPS_CONF1_EP) + c->options |= MIPS_CPU_EJTAG; + if (config1 & MIPS_CONF1_FP) { + c->options |= MIPS_CPU_FPU; + c->options |= MIPS_CPU_32FPR; + } + if (cpu_has_tlb) { + c->tlbsize = ((config1 & MIPS_CONF1_TLBS) >> 25) + 1; + c->tlbsizevtlb = c->tlbsize; + c->tlbsizeftlbsets = 0; + } + + return config1 & MIPS_CONF_M; +} + +static inline unsigned int decode_config2(struct cpuinfo_mips *c) +{ + unsigned int config2; + + config2 = read_c0_config2(); + + if (config2 & MIPS_CONF2_SL) + c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; + + return config2 & MIPS_CONF_M; +} + +static inline unsigned int decode_config3(struct cpuinfo_mips *c) +{ + unsigned int config3; + + config3 = read_c0_config3(); + + if (config3 & MIPS_CONF3_SM) { + c->ases |= MIPS_ASE_SMARTMIPS; + c->options |= MIPS_CPU_RIXI | MIPS_CPU_CTXTC; + } + if (config3 & MIPS_CONF3_RXI) + c->options |= MIPS_CPU_RIXI; + if (config3 & MIPS_CONF3_CTXTC) + c->options |= MIPS_CPU_CTXTC; + if (config3 & MIPS_CONF3_DSP) + c->ases |= MIPS_ASE_DSP; + if (config3 & MIPS_CONF3_DSP2P) { + c->ases |= MIPS_ASE_DSP2P; + if (cpu_has_mips_r6) + c->ases |= MIPS_ASE_DSP3; + } + if (config3 & MIPS_CONF3_VINT) + c->options |= MIPS_CPU_VINT; + if (config3 & MIPS_CONF3_VEIC) + c->options |= MIPS_CPU_VEIC; + if (config3 & MIPS_CONF3_LPA) + c->options |= MIPS_CPU_LPA; + if (config3 & MIPS_CONF3_MT) + c->ases |= MIPS_ASE_MIPSMT; + if (config3 & MIPS_CONF3_ULRI) + c->options |= MIPS_CPU_ULRI; + if (config3 & MIPS_CONF3_ISA) + c->options |= MIPS_CPU_MICROMIPS; + if (config3 & MIPS_CONF3_VZ) + c->ases |= MIPS_ASE_VZ; + if (config3 & MIPS_CONF3_SC) + c->options |= MIPS_CPU_SEGMENTS; + if (config3 & MIPS_CONF3_BI) + c->options |= MIPS_CPU_BADINSTR; + if (config3 & MIPS_CONF3_BP) + c->options |= MIPS_CPU_BADINSTRP; + if (config3 & MIPS_CONF3_MSA) + c->ases |= MIPS_ASE_MSA; + if (config3 & MIPS_CONF3_PW) { + c->htw_seq = 0; + c->options |= MIPS_CPU_HTW; + } + if (config3 & MIPS_CONF3_CDMM) + c->options |= MIPS_CPU_CDMM; + if (config3 & MIPS_CONF3_SP) + c->options |= MIPS_CPU_SP; + + return config3 & MIPS_CONF_M; +} + +static inline unsigned int decode_config4(struct cpuinfo_mips *c) +{ + unsigned int config4; + unsigned int newcf4; + unsigned int mmuextdef; + unsigned int ftlb_page = MIPS_CONF4_FTLBPAGESIZE; + unsigned long asid_mask; + + config4 = read_c0_config4(); + + if (cpu_has_tlb) { + if (((config4 & MIPS_CONF4_IE) >> 29) == 2) + c->options |= MIPS_CPU_TLBINV; + + /* + * R6 has dropped the MMUExtDef field from config4. + * On R6 the fields always describe the FTLB, and only if it is + * present according to Config.MT. + */ + if (!cpu_has_mips_r6) + mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; + else if (cpu_has_ftlb) + mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT; + else + mmuextdef = 0; + + switch (mmuextdef) { + case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT: + c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40; + c->tlbsizevtlb = c->tlbsize; + break; + case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT: + c->tlbsizevtlb += + ((config4 & MIPS_CONF4_VTLBSIZEEXT) >> + MIPS_CONF4_VTLBSIZEEXT_SHIFT) * 0x40; + c->tlbsize = c->tlbsizevtlb; + ftlb_page = MIPS_CONF4_VFTLBPAGESIZE; + fallthrough; + case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT: + if (mips_ftlb_disabled) + break; + newcf4 = (config4 & ~ftlb_page) | + (page_size_ftlb(mmuextdef) << + MIPS_CONF4_FTLBPAGESIZE_SHIFT); + write_c0_config4(newcf4); + back_to_back_c0_hazard(); + config4 = read_c0_config4(); + if (config4 != newcf4) { + pr_err("PAGE_SIZE 0x%lx is not supported by FTLB (config4=0x%x)\n", + PAGE_SIZE, config4); + /* Switch FTLB off */ + set_ftlb_enable(c, 0); + mips_ftlb_disabled = 1; + break; + } + c->tlbsizeftlbsets = 1 << + ((config4 & MIPS_CONF4_FTLBSETS) >> + MIPS_CONF4_FTLBSETS_SHIFT); + c->tlbsizeftlbways = ((config4 & MIPS_CONF4_FTLBWAYS) >> + MIPS_CONF4_FTLBWAYS_SHIFT) + 2; + c->tlbsize += c->tlbsizeftlbways * c->tlbsizeftlbsets; + mips_has_ftlb_configured = 1; + break; + } + } + + c->kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST) + >> MIPS_CONF4_KSCREXIST_SHIFT; + + asid_mask = MIPS_ENTRYHI_ASID; + if (config4 & MIPS_CONF4_AE) + asid_mask |= MIPS_ENTRYHI_ASIDX; + set_cpu_asid_mask(c, asid_mask); + + /* + * Warn if the computed ASID mask doesn't match the mask the kernel + * is built for. This may indicate either a serious problem or an + * easy optimisation opportunity, but either way should be addressed. + */ + WARN_ON(asid_mask != cpu_asid_mask(c)); + + return config4 & MIPS_CONF_M; +} + +static inline unsigned int decode_config5(struct cpuinfo_mips *c) +{ + unsigned int config5, max_mmid_width; + unsigned long asid_mask; + + config5 = read_c0_config5(); + config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE); + + if (cpu_has_mips_r6) { + if (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid) + config5 |= MIPS_CONF5_MI; + else + config5 &= ~MIPS_CONF5_MI; + } + + write_c0_config5(config5); + + if (config5 & MIPS_CONF5_EVA) + c->options |= MIPS_CPU_EVA; + if (config5 & MIPS_CONF5_MRP) + c->options |= MIPS_CPU_MAAR; + if (config5 & MIPS_CONF5_LLB) + c->options |= MIPS_CPU_RW_LLB; + if (config5 & MIPS_CONF5_MVH) + c->options |= MIPS_CPU_MVH; + if (cpu_has_mips_r6 && (config5 & MIPS_CONF5_VP)) + c->options |= MIPS_CPU_VP; + if (config5 & MIPS_CONF5_CA2) + c->ases |= MIPS_ASE_MIPS16E2; + + if (config5 & MIPS_CONF5_CRCP) + elf_hwcap |= HWCAP_MIPS_CRC32; + + if (cpu_has_mips_r6) { + /* Ensure the write to config5 above takes effect */ + back_to_back_c0_hazard(); + + /* Check whether we successfully enabled MMID support */ + config5 = read_c0_config5(); + if (config5 & MIPS_CONF5_MI) + c->options |= MIPS_CPU_MMID; + + /* + * Warn if we've hardcoded cpu_has_mmid to a value unsuitable + * for the CPU we're running on, or if CPUs in an SMP system + * have inconsistent MMID support. + */ + WARN_ON(!!cpu_has_mmid != !!(config5 & MIPS_CONF5_MI)); + + if (cpu_has_mmid) { + write_c0_memorymapid(~0ul); + back_to_back_c0_hazard(); + asid_mask = read_c0_memorymapid(); + + /* + * We maintain a bitmap to track MMID allocation, and + * need a sensible upper bound on the size of that + * bitmap. The initial CPU with MMID support (I6500) + * supports 16 bit MMIDs, which gives us an 8KiB + * bitmap. The architecture recommends that hardware + * support 32 bit MMIDs, which would give us a 512MiB + * bitmap - that's too big in most cases. + * + * Cap MMID width at 16 bits for now & we can revisit + * this if & when hardware supports anything wider. + */ + max_mmid_width = 16; + if (asid_mask > GENMASK(max_mmid_width - 1, 0)) { + pr_info("Capping MMID width at %d bits", + max_mmid_width); + asid_mask = GENMASK(max_mmid_width - 1, 0); + } + + set_cpu_asid_mask(c, asid_mask); + } + } + + return config5 & MIPS_CONF_M; +} + +static void decode_configs(struct cpuinfo_mips *c) +{ + int ok; + + /* MIPS32 or MIPS64 compliant CPU. */ + c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER | + MIPS_CPU_DIVEC | MIPS_CPU_LLSC | MIPS_CPU_MCHECK; + + c->scache.flags = MIPS_CACHE_NOT_PRESENT; + + /* Enable FTLB if present and not disabled */ + set_ftlb_enable(c, mips_ftlb_disabled ? 0 : FTLB_EN); + + ok = decode_config0(c); /* Read Config registers. */ + BUG_ON(!ok); /* Arch spec violation! */ + if (ok) + ok = decode_config1(c); + if (ok) + ok = decode_config2(c); + if (ok) + ok = decode_config3(c); + if (ok) + ok = decode_config4(c); + if (ok) + ok = decode_config5(c); + + /* Probe the EBase.WG bit */ + if (cpu_has_mips_r2_r6) { + u64 ebase; + unsigned int status; + + /* {read,write}_c0_ebase_64() may be UNDEFINED prior to r6 */ + ebase = cpu_has_mips64r6 ? read_c0_ebase_64() + : (s32)read_c0_ebase(); + if (ebase & MIPS_EBASE_WG) { + /* WG bit already set, we can avoid the clumsy probe */ + c->options |= MIPS_CPU_EBASE_WG; + } else { + /* Its UNDEFINED to change EBase while BEV=0 */ + status = read_c0_status(); + write_c0_status(status | ST0_BEV); + irq_enable_hazard(); + /* + * On pre-r6 cores, this may well clobber the upper bits + * of EBase. This is hard to avoid without potentially + * hitting UNDEFINED dm*c0 behaviour if EBase is 32-bit. + */ + if (cpu_has_mips64r6) + write_c0_ebase_64(ebase | MIPS_EBASE_WG); + else + write_c0_ebase(ebase | MIPS_EBASE_WG); + back_to_back_c0_hazard(); + /* Restore BEV */ + write_c0_status(status); + if (read_c0_ebase() & MIPS_EBASE_WG) { + c->options |= MIPS_CPU_EBASE_WG; + write_c0_ebase(ebase); + } + } + } + + /* configure the FTLB write probability */ + set_ftlb_enable(c, (mips_ftlb_disabled ? 0 : FTLB_EN) | FTLB_SET_PROB); + + mips_probe_watch_registers(c); + +#ifndef CONFIG_MIPS_CPS + if (cpu_has_mips_r2_r6) { + unsigned int core; + + core = get_ebase_cpunum(); + if (cpu_has_mipsmt) + core >>= fls(core_nvpes()) - 1; + cpu_set_core(c, core); + } +#endif +} + +/* + * Probe for certain guest capabilities by writing config bits and reading back. + * Finally write back the original value. + */ +#define probe_gc0_config(name, maxconf, bits) \ +do { \ + unsigned int tmp; \ + tmp = read_gc0_##name(); \ + write_gc0_##name(tmp | (bits)); \ + back_to_back_c0_hazard(); \ + maxconf = read_gc0_##name(); \ + write_gc0_##name(tmp); \ +} while (0) + +/* + * Probe for dynamic guest capabilities by changing certain config bits and + * reading back to see if they change. Finally write back the original value. + */ +#define probe_gc0_config_dyn(name, maxconf, dynconf, bits) \ +do { \ + maxconf = read_gc0_##name(); \ + write_gc0_##name(maxconf ^ (bits)); \ + back_to_back_c0_hazard(); \ + dynconf = maxconf ^ read_gc0_##name(); \ + write_gc0_##name(maxconf); \ + maxconf |= dynconf; \ +} while (0) + +static inline unsigned int decode_guest_config0(struct cpuinfo_mips *c) +{ + unsigned int config0; + + probe_gc0_config(config, config0, MIPS_CONF_M); + + if (config0 & MIPS_CONF_M) + c->guest.conf |= BIT(1); + return config0 & MIPS_CONF_M; +} + +static inline unsigned int decode_guest_config1(struct cpuinfo_mips *c) +{ + unsigned int config1, config1_dyn; + + probe_gc0_config_dyn(config1, config1, config1_dyn, + MIPS_CONF_M | MIPS_CONF1_PC | MIPS_CONF1_WR | + MIPS_CONF1_FP); + + if (config1 & MIPS_CONF1_FP) + c->guest.options |= MIPS_CPU_FPU; + if (config1_dyn & MIPS_CONF1_FP) + c->guest.options_dyn |= MIPS_CPU_FPU; + + if (config1 & MIPS_CONF1_WR) + c->guest.options |= MIPS_CPU_WATCH; + if (config1_dyn & MIPS_CONF1_WR) + c->guest.options_dyn |= MIPS_CPU_WATCH; + + if (config1 & MIPS_CONF1_PC) + c->guest.options |= MIPS_CPU_PERF; + if (config1_dyn & MIPS_CONF1_PC) + c->guest.options_dyn |= MIPS_CPU_PERF; + + if (config1 & MIPS_CONF_M) + c->guest.conf |= BIT(2); + return config1 & MIPS_CONF_M; +} + +static inline unsigned int decode_guest_config2(struct cpuinfo_mips *c) +{ + unsigned int config2; + + probe_gc0_config(config2, config2, MIPS_CONF_M); + + if (config2 & MIPS_CONF_M) + c->guest.conf |= BIT(3); + return config2 & MIPS_CONF_M; +} + +static inline unsigned int decode_guest_config3(struct cpuinfo_mips *c) +{ + unsigned int config3, config3_dyn; + + probe_gc0_config_dyn(config3, config3, config3_dyn, + MIPS_CONF_M | MIPS_CONF3_MSA | MIPS_CONF3_ULRI | + MIPS_CONF3_CTXTC); + + if (config3 & MIPS_CONF3_CTXTC) + c->guest.options |= MIPS_CPU_CTXTC; + if (config3_dyn & MIPS_CONF3_CTXTC) + c->guest.options_dyn |= MIPS_CPU_CTXTC; + + if (config3 & MIPS_CONF3_PW) + c->guest.options |= MIPS_CPU_HTW; + + if (config3 & MIPS_CONF3_ULRI) + c->guest.options |= MIPS_CPU_ULRI; + + if (config3 & MIPS_CONF3_SC) + c->guest.options |= MIPS_CPU_SEGMENTS; + + if (config3 & MIPS_CONF3_BI) + c->guest.options |= MIPS_CPU_BADINSTR; + if (config3 & MIPS_CONF3_BP) + c->guest.options |= MIPS_CPU_BADINSTRP; + + if (config3 & MIPS_CONF3_MSA) + c->guest.ases |= MIPS_ASE_MSA; + if (config3_dyn & MIPS_CONF3_MSA) + c->guest.ases_dyn |= MIPS_ASE_MSA; + + if (config3 & MIPS_CONF_M) + c->guest.conf |= BIT(4); + return config3 & MIPS_CONF_M; +} + +static inline unsigned int decode_guest_config4(struct cpuinfo_mips *c) +{ + unsigned int config4; + + probe_gc0_config(config4, config4, + MIPS_CONF_M | MIPS_CONF4_KSCREXIST); + + c->guest.kscratch_mask = (config4 & MIPS_CONF4_KSCREXIST) + >> MIPS_CONF4_KSCREXIST_SHIFT; + + if (config4 & MIPS_CONF_M) + c->guest.conf |= BIT(5); + return config4 & MIPS_CONF_M; +} + +static inline unsigned int decode_guest_config5(struct cpuinfo_mips *c) +{ + unsigned int config5, config5_dyn; + + probe_gc0_config_dyn(config5, config5, config5_dyn, + MIPS_CONF_M | MIPS_CONF5_MVH | MIPS_CONF5_MRP); + + if (config5 & MIPS_CONF5_MRP) + c->guest.options |= MIPS_CPU_MAAR; + if (config5_dyn & MIPS_CONF5_MRP) + c->guest.options_dyn |= MIPS_CPU_MAAR; + + if (config5 & MIPS_CONF5_LLB) + c->guest.options |= MIPS_CPU_RW_LLB; + + if (config5 & MIPS_CONF5_MVH) + c->guest.options |= MIPS_CPU_MVH; + + if (config5 & MIPS_CONF_M) + c->guest.conf |= BIT(6); + return config5 & MIPS_CONF_M; +} + +static inline void decode_guest_configs(struct cpuinfo_mips *c) +{ + unsigned int ok; + + ok = decode_guest_config0(c); + if (ok) + ok = decode_guest_config1(c); + if (ok) + ok = decode_guest_config2(c); + if (ok) + ok = decode_guest_config3(c); + if (ok) + ok = decode_guest_config4(c); + if (ok) + decode_guest_config5(c); +} + +static inline void cpu_probe_guestctl0(struct cpuinfo_mips *c) +{ + unsigned int guestctl0, temp; + + guestctl0 = read_c0_guestctl0(); + + if (guestctl0 & MIPS_GCTL0_G0E) + c->options |= MIPS_CPU_GUESTCTL0EXT; + if (guestctl0 & MIPS_GCTL0_G1) + c->options |= MIPS_CPU_GUESTCTL1; + if (guestctl0 & MIPS_GCTL0_G2) + c->options |= MIPS_CPU_GUESTCTL2; + if (!(guestctl0 & MIPS_GCTL0_RAD)) { + c->options |= MIPS_CPU_GUESTID; + + /* + * Probe for Direct Root to Guest (DRG). Set GuestCtl1.RID = 0 + * first, otherwise all data accesses will be fully virtualised + * as if they were performed by guest mode. + */ + write_c0_guestctl1(0); + tlbw_use_hazard(); + + write_c0_guestctl0(guestctl0 | MIPS_GCTL0_DRG); + back_to_back_c0_hazard(); + temp = read_c0_guestctl0(); + + if (temp & MIPS_GCTL0_DRG) { + write_c0_guestctl0(guestctl0); + c->options |= MIPS_CPU_DRG; + } + } +} + +static inline void cpu_probe_guestctl1(struct cpuinfo_mips *c) +{ + if (cpu_has_guestid) { + /* determine the number of bits of GuestID available */ + write_c0_guestctl1(MIPS_GCTL1_ID); + back_to_back_c0_hazard(); + c->guestid_mask = (read_c0_guestctl1() & MIPS_GCTL1_ID) + >> MIPS_GCTL1_ID_SHIFT; + write_c0_guestctl1(0); + } +} + +static inline void cpu_probe_gtoffset(struct cpuinfo_mips *c) +{ + /* determine the number of bits of GTOffset available */ + write_c0_gtoffset(0xffffffff); + back_to_back_c0_hazard(); + c->gtoffset_mask = read_c0_gtoffset(); + write_c0_gtoffset(0); +} + +static inline void cpu_probe_vz(struct cpuinfo_mips *c) +{ + cpu_probe_guestctl0(c); + if (cpu_has_guestctl1) + cpu_probe_guestctl1(c); + + cpu_probe_gtoffset(c); + + decode_guest_configs(c); +} + +#define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \ + | MIPS_CPU_COUNTER) + +static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) +{ + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_R2000: + c->cputype = CPU_R2000; + __cpu_name[cpu] = "R2000"; + c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; + c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | + MIPS_CPU_NOFPUEX; + if (__cpu_has_fpu()) + c->options |= MIPS_CPU_FPU; + c->tlbsize = 64; + break; + case PRID_IMP_R3000: + if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) { + if (cpu_has_confreg()) { + c->cputype = CPU_R3081E; + __cpu_name[cpu] = "R3081"; + } else { + c->cputype = CPU_R3000A; + __cpu_name[cpu] = "R3000A"; + } + } else { + c->cputype = CPU_R3000; + __cpu_name[cpu] = "R3000"; + } + c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; + c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | + MIPS_CPU_NOFPUEX; + if (__cpu_has_fpu()) + c->options |= MIPS_CPU_FPU; + c->tlbsize = 64; + break; + case PRID_IMP_R4000: + if (read_c0_config() & CONF_SC) { + if ((c->processor_id & PRID_REV_MASK) >= + PRID_REV_R4400) { + c->cputype = CPU_R4400PC; + __cpu_name[cpu] = "R4400PC"; + } else { + c->cputype = CPU_R4000PC; + __cpu_name[cpu] = "R4000PC"; + } + } else { + int cca = read_c0_config() & CONF_CM_CMASK; + int mc; + + /* + * SC and MC versions can't be reliably told apart, + * but only the latter support coherent caching + * modes so assume the firmware has set the KSEG0 + * coherency attribute reasonably (if uncached, we + * assume SC). + */ + switch (cca) { + case CONF_CM_CACHABLE_CE: + case CONF_CM_CACHABLE_COW: + case CONF_CM_CACHABLE_CUW: + mc = 1; + break; + default: + mc = 0; + break; + } + if ((c->processor_id & PRID_REV_MASK) >= + PRID_REV_R4400) { + c->cputype = mc ? CPU_R4400MC : CPU_R4400SC; + __cpu_name[cpu] = mc ? "R4400MC" : "R4400SC"; + } else { + c->cputype = mc ? CPU_R4000MC : CPU_R4000SC; + __cpu_name[cpu] = mc ? "R4000MC" : "R4000SC"; + } + } + + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_WATCH | MIPS_CPU_VCE | + MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + case PRID_IMP_VR41XX: + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + c->options = R4K_OPTS; + c->tlbsize = 32; + switch (c->processor_id & 0xf0) { + case PRID_REV_VR4111: + c->cputype = CPU_VR4111; + __cpu_name[cpu] = "NEC VR4111"; + break; + case PRID_REV_VR4121: + c->cputype = CPU_VR4121; + __cpu_name[cpu] = "NEC VR4121"; + break; + case PRID_REV_VR4122: + if ((c->processor_id & 0xf) < 0x3) { + c->cputype = CPU_VR4122; + __cpu_name[cpu] = "NEC VR4122"; + } else { + c->cputype = CPU_VR4181A; + __cpu_name[cpu] = "NEC VR4181A"; + } + break; + case PRID_REV_VR4130: + if ((c->processor_id & 0xf) < 0x4) { + c->cputype = CPU_VR4131; + __cpu_name[cpu] = "NEC VR4131"; + } else { + c->cputype = CPU_VR4133; + c->options |= MIPS_CPU_LLSC; + __cpu_name[cpu] = "NEC VR4133"; + } + break; + default: + printk(KERN_INFO "Unexpected CPU of NEC VR4100 series\n"); + c->cputype = CPU_VR41XX; + __cpu_name[cpu] = "NEC Vr41xx"; + break; + } + break; + case PRID_IMP_R4600: + c->cputype = CPU_R4600; + __cpu_name[cpu] = "R4600"; + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + #if 0 + case PRID_IMP_R4650: + /* + * This processor doesn't have an MMU, so it's not + * "real easy" to run Linux on it. It is left purely + * for documentation. Commented out because it shares + * it's c0_prid id number with the TX3900. + */ + c->cputype = CPU_R4650; + __cpu_name[cpu] = "R4650"; + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + #endif + case PRID_IMP_TX39: + c->fpu_msk31 |= FPU_CSR_CONDX | FPU_CSR_FS; + c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE; + + if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { + c->cputype = CPU_TX3927; + __cpu_name[cpu] = "TX3927"; + c->tlbsize = 64; + } else { + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_TX3912: + c->cputype = CPU_TX3912; + __cpu_name[cpu] = "TX3912"; + c->tlbsize = 32; + break; + case PRID_REV_TX3922: + c->cputype = CPU_TX3922; + __cpu_name[cpu] = "TX3922"; + c->tlbsize = 64; + break; + } + } + break; + case PRID_IMP_R4700: + c->cputype = CPU_R4700; + __cpu_name[cpu] = "R4700"; + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + case PRID_IMP_TX49: + c->cputype = CPU_TX49XX; + __cpu_name[cpu] = "R49XX"; + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + c->options = R4K_OPTS | MIPS_CPU_LLSC; + if (!(c->processor_id & 0x08)) + c->options |= MIPS_CPU_FPU | MIPS_CPU_32FPR; + c->tlbsize = 48; + break; + case PRID_IMP_R5000: + c->cputype = CPU_R5000; + __cpu_name[cpu] = "R5000"; + set_isa(c, MIPS_CPU_ISA_IV); + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + case PRID_IMP_R5500: + c->cputype = CPU_R5500; + __cpu_name[cpu] = "R5500"; + set_isa(c, MIPS_CPU_ISA_IV); + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_WATCH | MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + case PRID_IMP_NEVADA: + c->cputype = CPU_NEVADA; + __cpu_name[cpu] = "Nevada"; + set_isa(c, MIPS_CPU_ISA_IV); + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_DIVEC | MIPS_CPU_LLSC; + c->tlbsize = 48; + break; + case PRID_IMP_RM7000: + c->cputype = CPU_RM7000; + __cpu_name[cpu] = "RM7000"; + set_isa(c, MIPS_CPU_ISA_IV); + c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_LLSC; + /* + * Undocumented RM7000: Bit 29 in the info register of + * the RM7000 v2.0 indicates if the TLB has 48 or 64 + * entries. + * + * 29 1 => 64 entry JTLB + * 0 => 48 entry JTLB + */ + c->tlbsize = (read_c0_info() & (1 << 29)) ? 64 : 48; + break; + case PRID_IMP_R10000: + c->cputype = CPU_R10000; + __cpu_name[cpu] = "R10000"; + set_isa(c, MIPS_CPU_ISA_IV); + c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | + MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_COUNTER | MIPS_CPU_WATCH | + MIPS_CPU_LLSC; + c->tlbsize = 64; + break; + case PRID_IMP_R12000: + c->cputype = CPU_R12000; + __cpu_name[cpu] = "R12000"; + set_isa(c, MIPS_CPU_ISA_IV); + c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | + MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_COUNTER | MIPS_CPU_WATCH | + MIPS_CPU_LLSC; + c->tlbsize = 64; + write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST); + break; + case PRID_IMP_R14000: + if (((c->processor_id >> 4) & 0x0f) > 2) { + c->cputype = CPU_R16000; + __cpu_name[cpu] = "R16000"; + } else { + c->cputype = CPU_R14000; + __cpu_name[cpu] = "R14000"; + } + set_isa(c, MIPS_CPU_ISA_IV); + c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX | + MIPS_CPU_FPU | MIPS_CPU_32FPR | + MIPS_CPU_COUNTER | MIPS_CPU_WATCH | + MIPS_CPU_LLSC; + c->tlbsize = 64; + write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST); + break; + case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + c->cputype = CPU_LOONGSON2EF; + __cpu_name[cpu] = "ICT Loongson-2"; + set_elf_platform(cpu, "loongson2e"); + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + break; + case PRID_REV_LOONGSON2F: + c->cputype = CPU_LOONGSON2EF; + __cpu_name[cpu] = "ICT Loongson-2"; + set_elf_platform(cpu, "loongson2f"); + set_isa(c, MIPS_CPU_ISA_III); + c->fpu_msk31 |= FPU_CSR_CONDX; + break; + case PRID_REV_LOONGSON3A_R1: + c->cputype = CPU_LOONGSON64; + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R1); + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | + MIPS_ASE_LOONGSON_EXT); + break; + case PRID_REV_LOONGSON3B_R1: + case PRID_REV_LOONGSON3B_R2: + c->cputype = CPU_LOONGSON64; + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3b"); + set_isa(c, MIPS_CPU_ISA_M64R1); + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | + MIPS_ASE_LOONGSON_EXT); + break; + } + + c->options = R4K_OPTS | + MIPS_CPU_FPU | MIPS_CPU_LLSC | + MIPS_CPU_32FPR; + c->tlbsize = 64; + set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID); + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + break; + case PRID_IMP_LOONGSON_32: /* Loongson-1 */ + decode_configs(c); + + c->cputype = CPU_LOONGSON32; + + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON1B: + __cpu_name[cpu] = "Loongson 1B"; + break; + } + + break; + } +} + +static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) +{ + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_QEMU_GENERIC: + c->writecombine = _CACHE_UNCACHED; + c->cputype = CPU_QEMU_GENERIC; + __cpu_name[cpu] = "MIPS GENERIC QEMU"; + break; + case PRID_IMP_4KC: + c->cputype = CPU_4KC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 4Kc"; + break; + case PRID_IMP_4KEC: + case PRID_IMP_4KECR2: + c->cputype = CPU_4KEC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 4KEc"; + break; + case PRID_IMP_4KSC: + case PRID_IMP_4KSD: + c->cputype = CPU_4KSC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 4KSc"; + break; + case PRID_IMP_5KC: + c->cputype = CPU_5KC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 5Kc"; + break; + case PRID_IMP_5KE: + c->cputype = CPU_5KE; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 5KE"; + break; + case PRID_IMP_20KC: + c->cputype = CPU_20KC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 20Kc"; + break; + case PRID_IMP_24K: + c->cputype = CPU_24K; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 24Kc"; + break; + case PRID_IMP_24KE: + c->cputype = CPU_24K; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 24KEc"; + break; + case PRID_IMP_25KF: + c->cputype = CPU_25KF; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 25Kc"; + break; + case PRID_IMP_34K: + c->cputype = CPU_34K; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 34Kc"; + cpu_set_mt_per_tc_perf(c); + break; + case PRID_IMP_74K: + c->cputype = CPU_74K; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 74Kc"; + break; + case PRID_IMP_M14KC: + c->cputype = CPU_M14KC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS M14Kc"; + break; + case PRID_IMP_M14KEC: + c->cputype = CPU_M14KEC; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS M14KEc"; + break; + case PRID_IMP_1004K: + c->cputype = CPU_1004K; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 1004Kc"; + cpu_set_mt_per_tc_perf(c); + break; + case PRID_IMP_1074K: + c->cputype = CPU_1074K; + c->writecombine = _CACHE_UNCACHED; + __cpu_name[cpu] = "MIPS 1074Kc"; + break; + case PRID_IMP_INTERAPTIV_UP: + c->cputype = CPU_INTERAPTIV; + __cpu_name[cpu] = "MIPS interAptiv"; + cpu_set_mt_per_tc_perf(c); + break; + case PRID_IMP_INTERAPTIV_MP: + c->cputype = CPU_INTERAPTIV; + __cpu_name[cpu] = "MIPS interAptiv (multi)"; + cpu_set_mt_per_tc_perf(c); + break; + case PRID_IMP_PROAPTIV_UP: + c->cputype = CPU_PROAPTIV; + __cpu_name[cpu] = "MIPS proAptiv"; + break; + case PRID_IMP_PROAPTIV_MP: + c->cputype = CPU_PROAPTIV; + __cpu_name[cpu] = "MIPS proAptiv (multi)"; + break; + case PRID_IMP_P5600: + c->cputype = CPU_P5600; + __cpu_name[cpu] = "MIPS P5600"; + break; + case PRID_IMP_P6600: + c->cputype = CPU_P6600; + __cpu_name[cpu] = "MIPS P6600"; + break; + case PRID_IMP_I6400: + c->cputype = CPU_I6400; + __cpu_name[cpu] = "MIPS I6400"; + break; + case PRID_IMP_I6500: + c->cputype = CPU_I6500; + __cpu_name[cpu] = "MIPS I6500"; + break; + case PRID_IMP_M5150: + c->cputype = CPU_M5150; + __cpu_name[cpu] = "MIPS M5150"; + break; + case PRID_IMP_M6250: + c->cputype = CPU_M6250; + __cpu_name[cpu] = "MIPS M6250"; + break; + } + + decode_configs(c); + + spram_config(); + + mm_config(c); + + switch (__get_cpu_type(c->cputype)) { + case CPU_M5150: + case CPU_P5600: + set_isa(c, MIPS_CPU_ISA_M32R5); + break; + case CPU_I6500: + c->options |= MIPS_CPU_SHARED_FTLB_ENTRIES; + fallthrough; + case CPU_I6400: + c->options |= MIPS_CPU_SHARED_FTLB_RAM; + fallthrough; + default: + break; + } + + /* Recent MIPS cores use the implementation-dependent ExcCode 16 for + * cache/FTLB parity exceptions. + */ + switch (__get_cpu_type(c->cputype)) { + case CPU_PROAPTIV: + case CPU_P5600: + case CPU_P6600: + case CPU_I6400: + case CPU_I6500: + c->options |= MIPS_CPU_FTLBPAREX; + break; + } +} + +static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_AU1_REV1: + case PRID_IMP_AU1_REV2: + c->cputype = CPU_ALCHEMY; + switch ((c->processor_id >> 24) & 0xff) { + case 0: + __cpu_name[cpu] = "Au1000"; + break; + case 1: + __cpu_name[cpu] = "Au1500"; + break; + case 2: + __cpu_name[cpu] = "Au1100"; + break; + case 3: + __cpu_name[cpu] = "Au1550"; + break; + case 4: + __cpu_name[cpu] = "Au1200"; + if ((c->processor_id & PRID_REV_MASK) == 2) + __cpu_name[cpu] = "Au1250"; + break; + case 5: + __cpu_name[cpu] = "Au1210"; + break; + default: + __cpu_name[cpu] = "Au1xxx"; + break; + } + break; + } +} + +static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_SB1: + c->cputype = CPU_SB1; + __cpu_name[cpu] = "SiByte SB1"; + /* FPU in pass1 is known to have issues. */ + if ((c->processor_id & PRID_REV_MASK) < 0x02) + c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); + break; + case PRID_IMP_SB1A: + c->cputype = CPU_SB1A; + __cpu_name[cpu] = "SiByte SB1A"; + break; + } +} + +static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_SR71000: + c->cputype = CPU_SR71000; + __cpu_name[cpu] = "Sandcraft SR71000"; + c->scache.ways = 8; + c->tlbsize = 64; + break; + } +} + +static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_PR4450: + c->cputype = CPU_PR4450; + __cpu_name[cpu] = "Philips PR4450"; + set_isa(c, MIPS_CPU_ISA_M32R1); + break; + } +} + +static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_BMIPS32_REV4: + case PRID_IMP_BMIPS32_REV8: + c->cputype = CPU_BMIPS32; + __cpu_name[cpu] = "Broadcom BMIPS32"; + set_elf_platform(cpu, "bmips32"); + break; + case PRID_IMP_BMIPS3300: + case PRID_IMP_BMIPS3300_ALT: + case PRID_IMP_BMIPS3300_BUG: + c->cputype = CPU_BMIPS3300; + __cpu_name[cpu] = "Broadcom BMIPS3300"; + set_elf_platform(cpu, "bmips3300"); + break; + case PRID_IMP_BMIPS43XX: { + int rev = c->processor_id & PRID_REV_MASK; + + if (rev >= PRID_REV_BMIPS4380_LO && + rev <= PRID_REV_BMIPS4380_HI) { + c->cputype = CPU_BMIPS4380; + __cpu_name[cpu] = "Broadcom BMIPS4380"; + set_elf_platform(cpu, "bmips4380"); + c->options |= MIPS_CPU_RIXI; + } else { + c->cputype = CPU_BMIPS4350; + __cpu_name[cpu] = "Broadcom BMIPS4350"; + set_elf_platform(cpu, "bmips4350"); + } + break; + } + case PRID_IMP_BMIPS5000: + case PRID_IMP_BMIPS5200: + c->cputype = CPU_BMIPS5000; + if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_BMIPS5200) + __cpu_name[cpu] = "Broadcom BMIPS5200"; + else + __cpu_name[cpu] = "Broadcom BMIPS5000"; + set_elf_platform(cpu, "bmips5000"); + c->options |= MIPS_CPU_ULRI | MIPS_CPU_RIXI; + break; + } +} + +static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_CAVIUM_CN38XX: + case PRID_IMP_CAVIUM_CN31XX: + case PRID_IMP_CAVIUM_CN30XX: + c->cputype = CPU_CAVIUM_OCTEON; + __cpu_name[cpu] = "Cavium Octeon"; + goto platform; + case PRID_IMP_CAVIUM_CN58XX: + case PRID_IMP_CAVIUM_CN56XX: + case PRID_IMP_CAVIUM_CN50XX: + case PRID_IMP_CAVIUM_CN52XX: + c->cputype = CPU_CAVIUM_OCTEON_PLUS; + __cpu_name[cpu] = "Cavium Octeon+"; +platform: + set_elf_platform(cpu, "octeon"); + break; + case PRID_IMP_CAVIUM_CN61XX: + case PRID_IMP_CAVIUM_CN63XX: + case PRID_IMP_CAVIUM_CN66XX: + case PRID_IMP_CAVIUM_CN68XX: + case PRID_IMP_CAVIUM_CNF71XX: + c->cputype = CPU_CAVIUM_OCTEON2; + __cpu_name[cpu] = "Cavium Octeon II"; + set_elf_platform(cpu, "octeon2"); + break; + case PRID_IMP_CAVIUM_CN70XX: + case PRID_IMP_CAVIUM_CN73XX: + case PRID_IMP_CAVIUM_CNF75XX: + case PRID_IMP_CAVIUM_CN78XX: + c->cputype = CPU_CAVIUM_OCTEON3; + __cpu_name[cpu] = "Cavium Octeon III"; + set_elf_platform(cpu, "octeon3"); + break; + default: + printk(KERN_INFO "Unknown Octeon chip!\n"); + c->cputype = CPU_UNKNOWN; + break; + } +} + +#ifdef CONFIG_CPU_LOONGSON64 +#include <loongson_regs.h> + +static inline void decode_cpucfg(struct cpuinfo_mips *c) +{ + u32 cfg1 = read_cpucfg(LOONGSON_CFG1); + u32 cfg2 = read_cpucfg(LOONGSON_CFG2); + u32 cfg3 = read_cpucfg(LOONGSON_CFG3); + + if (cfg1 & LOONGSON_CFG1_MMI) + c->ases |= MIPS_ASE_LOONGSON_MMI; + + if (cfg2 & LOONGSON_CFG2_LEXT1) + c->ases |= MIPS_ASE_LOONGSON_EXT; + + if (cfg2 & LOONGSON_CFG2_LEXT2) + c->ases |= MIPS_ASE_LOONGSON_EXT2; + + if (cfg2 & LOONGSON_CFG2_LSPW) { + c->options |= MIPS_CPU_LDPTE; + c->guest.options |= MIPS_CPU_LDPTE; + } + + if (cfg3 & LOONGSON_CFG3_LCAMP) + c->ases |= MIPS_ASE_LOONGSON_CAM; +} + +static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) +{ + c->cputype = CPU_LOONGSON64; + + /* All Loongson processors covered here define ExcCode 16 as GSExc. */ + decode_configs(c); + c->options |= MIPS_CPU_GSEXCEX; + + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_LOONGSON_64R: /* Loongson-64 Reduced */ + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2K_R1_0: + case PRID_REV_LOONGSON2K_R1_1: + case PRID_REV_LOONGSON2K_R1_2: + case PRID_REV_LOONGSON2K_R1_3: + __cpu_name[cpu] = "Loongson-2K"; + set_elf_platform(cpu, "gs264e"); + set_isa(c, MIPS_CPU_ISA_M64R2); + break; + } + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_EXT | + MIPS_ASE_LOONGSON_EXT2); + break; + case PRID_IMP_LOONGSON_64C: /* Loongson-3 Classic */ + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON3A_R2_0: + case PRID_REV_LOONGSON3A_R2_1: + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R2); + break; + case PRID_REV_LOONGSON3A_R3_0: + case PRID_REV_LOONGSON3A_R3_1: + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R2); + break; + } + /* + * Loongson-3 Classic did not implement MIPS standard TLBINV + * but implemented TLBINVF and EHINV. As currently we're only + * using these two features, enable MIPS_CPU_TLBINV as well. + * + * Also some early Loongson-3A2000 had wrong TLB type in Config + * register, we correct it here. + */ + c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | + MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); + c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */ + break; + case PRID_IMP_LOONGSON_64G: + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R2); + decode_cpucfg(c); + break; + default: + panic("Unknown Loongson Processor ID!"); + break; + } +} +#else +static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { } +#endif + +static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) +{ + decode_configs(c); + + /* + * XBurst misses a config2 register, so config3 decode was skipped in + * decode_configs(). + */ + decode_config3(c); + + /* XBurst does not implement the CP0 counter. */ + c->options &= ~MIPS_CPU_COUNTER; + BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter); + + /* XBurst has virtually tagged icache */ + c->icache.flags |= MIPS_CACHE_VTAG; + + switch (c->processor_id & PRID_IMP_MASK) { + + /* XBurst®1 with MXU1.0/MXU1.1 SIMD ISA */ + case PRID_IMP_XBURST_REV1: + + /* + * The XBurst core by default attempts to avoid branch target + * buffer lookups by detecting & special casing loops. This + * feature will cause BogoMIPS and lpj calculate in error. + * Set cp0 config7 bit 4 to disable this feature. + */ + set_c0_config7(MIPS_CONF7_BTB_LOOP_EN); + + switch (c->processor_id & PRID_COMP_MASK) { + + /* + * The config0 register in the XBurst CPUs with a processor ID of + * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, + * but they don't actually support this ISA. + */ + case PRID_COMP_INGENIC_D0: + c->isa_level &= ~MIPS_CPU_ISA_M32R2; + + /* FPU is not properly detected on JZ4760(B). */ + if (c->processor_id == 0x2ed0024f) + c->options |= MIPS_CPU_FPU; + + fallthrough; + + /* + * The config0 register in the XBurst CPUs with a processor ID of + * PRID_COMP_INGENIC_D0 or PRID_COMP_INGENIC_D1 has an abandoned + * huge page tlb mode, this mode is not compatible with the MIPS + * standard, it will cause tlbmiss and into an infinite loop + * (line 21 in the tlb-funcs.S) when starting the init process. + * After chip reset, the default is HPTLB mode, Write 0xa9000000 + * to cp0 register 5 sel 4 to switch back to VTLB mode to prevent + * getting stuck. + */ + case PRID_COMP_INGENIC_D1: + write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS); + break; + + default: + break; + } + fallthrough; + + /* XBurst®1 with MXU2.0 SIMD ISA */ + case PRID_IMP_XBURST_REV2: + /* Ingenic uses the WA bit to achieve write-combine memory writes */ + c->writecombine = _CACHE_CACHABLE_WA; + c->cputype = CPU_XBURST; + __cpu_name[cpu] = "Ingenic XBurst"; + break; + + /* XBurst®2 with MXU2.1 SIMD ISA */ + case PRID_IMP_XBURST2: + c->cputype = CPU_XBURST; + __cpu_name[cpu] = "Ingenic XBurst II"; + break; + + default: + panic("Unknown Ingenic Processor ID!"); + break; + } +} + +static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) +{ + decode_configs(c); + + if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) { + c->cputype = CPU_ALCHEMY; + __cpu_name[cpu] = "Au1300"; + /* following stuff is not for Alchemy */ + return; + } + + c->options = (MIPS_CPU_TLB | + MIPS_CPU_4KEX | + MIPS_CPU_COUNTER | + MIPS_CPU_DIVEC | + MIPS_CPU_WATCH | + MIPS_CPU_EJTAG | + MIPS_CPU_LLSC); + + switch (c->processor_id & PRID_IMP_MASK) { + case PRID_IMP_NETLOGIC_XLP2XX: + case PRID_IMP_NETLOGIC_XLP9XX: + case PRID_IMP_NETLOGIC_XLP5XX: + c->cputype = CPU_XLP; + __cpu_name[cpu] = "Broadcom XLPII"; + break; + + case PRID_IMP_NETLOGIC_XLP8XX: + case PRID_IMP_NETLOGIC_XLP3XX: + c->cputype = CPU_XLP; + __cpu_name[cpu] = "Netlogic XLP"; + break; + + case PRID_IMP_NETLOGIC_XLR732: + case PRID_IMP_NETLOGIC_XLR716: + case PRID_IMP_NETLOGIC_XLR532: + case PRID_IMP_NETLOGIC_XLR308: + case PRID_IMP_NETLOGIC_XLR532C: + case PRID_IMP_NETLOGIC_XLR516C: + case PRID_IMP_NETLOGIC_XLR508C: + case PRID_IMP_NETLOGIC_XLR308C: + c->cputype = CPU_XLR; + __cpu_name[cpu] = "Netlogic XLR"; + break; + + case PRID_IMP_NETLOGIC_XLS608: + case PRID_IMP_NETLOGIC_XLS408: + case PRID_IMP_NETLOGIC_XLS404: + case PRID_IMP_NETLOGIC_XLS208: + case PRID_IMP_NETLOGIC_XLS204: + case PRID_IMP_NETLOGIC_XLS108: + case PRID_IMP_NETLOGIC_XLS104: + case PRID_IMP_NETLOGIC_XLS616B: + case PRID_IMP_NETLOGIC_XLS608B: + case PRID_IMP_NETLOGIC_XLS416B: + case PRID_IMP_NETLOGIC_XLS412B: + case PRID_IMP_NETLOGIC_XLS408B: + case PRID_IMP_NETLOGIC_XLS404B: + c->cputype = CPU_XLR; + __cpu_name[cpu] = "Netlogic XLS"; + break; + + default: + pr_info("Unknown Netlogic chip id [%02x]!\n", + c->processor_id); + c->cputype = CPU_XLR; + break; + } + + if (c->cputype == CPU_XLP) { + set_isa(c, MIPS_CPU_ISA_M64R2); + c->options |= (MIPS_CPU_FPU | MIPS_CPU_ULRI | MIPS_CPU_MCHECK); + /* This will be updated again after all threads are woken up */ + c->tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + } else { + set_isa(c, MIPS_CPU_ISA_M64R1); + c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; + } + c->kscratch_mask = 0xf; +} + +#ifdef CONFIG_64BIT +/* For use by uaccess.h */ +u64 __ua_limit; +EXPORT_SYMBOL(__ua_limit); +#endif + +const char *__cpu_name[NR_CPUS]; +const char *__elf_platform; +const char *__elf_base_platform; + +void cpu_probe(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned int cpu = smp_processor_id(); + + /* + * Set a default elf platform, cpu probe may later + * overwrite it with a more precise value + */ + set_elf_platform(cpu, "mips"); + + c->processor_id = PRID_IMP_UNKNOWN; + c->fpu_id = FPIR_IMP_NONE; + c->cputype = CPU_UNKNOWN; + c->writecombine = _CACHE_UNCACHED; + + c->fpu_csr31 = FPU_CSR_RN; + c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008; + + c->processor_id = read_c0_prid(); + switch (c->processor_id & PRID_COMP_MASK) { + case PRID_COMP_LEGACY: + cpu_probe_legacy(c, cpu); + break; + case PRID_COMP_MIPS: + cpu_probe_mips(c, cpu); + break; + case PRID_COMP_ALCHEMY: + cpu_probe_alchemy(c, cpu); + break; + case PRID_COMP_SIBYTE: + cpu_probe_sibyte(c, cpu); + break; + case PRID_COMP_BROADCOM: + cpu_probe_broadcom(c, cpu); + break; + case PRID_COMP_SANDCRAFT: + cpu_probe_sandcraft(c, cpu); + break; + case PRID_COMP_NXP: + cpu_probe_nxp(c, cpu); + break; + case PRID_COMP_CAVIUM: + cpu_probe_cavium(c, cpu); + break; + case PRID_COMP_LOONGSON: + cpu_probe_loongson(c, cpu); + break; + case PRID_COMP_INGENIC_13: + case PRID_COMP_INGENIC_D0: + case PRID_COMP_INGENIC_D1: + case PRID_COMP_INGENIC_E1: + cpu_probe_ingenic(c, cpu); + break; + case PRID_COMP_NETLOGIC: + cpu_probe_netlogic(c, cpu); + break; + } + + BUG_ON(!__cpu_name[cpu]); + BUG_ON(c->cputype == CPU_UNKNOWN); + + /* + * Platform code can force the cpu type to optimize code + * generation. In that case be sure the cpu type is correctly + * manually setup otherwise it could trigger some nasty bugs. + */ + BUG_ON(current_cpu_type() != c->cputype); + + if (cpu_has_rixi) { + /* Enable the RIXI exceptions */ + set_c0_pagegrain(PG_IEC); + back_to_back_c0_hazard(); + /* Verify the IEC bit is set */ + if (read_c0_pagegrain() & PG_IEC) + c->options |= MIPS_CPU_RIXIEX; + } + + if (mips_fpu_disabled) + c->options &= ~MIPS_CPU_FPU; + + if (mips_dsp_disabled) + c->ases &= ~(MIPS_ASE_DSP | MIPS_ASE_DSP2P); + + if (mips_htw_disabled) { + c->options &= ~MIPS_CPU_HTW; + write_c0_pwctl(read_c0_pwctl() & + ~(1 << MIPS_PWCTL_PWEN_SHIFT)); + } + + if (c->options & MIPS_CPU_FPU) + cpu_set_fpu_opts(c); + else + cpu_set_nofpu_opts(c); + + if (cpu_has_mips_r2_r6) { + c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1; + /* R2 has Performance Counter Interrupt indicator */ + c->options |= MIPS_CPU_PCI; + } + else + c->srsets = 1; + + if (cpu_has_mips_r6) + elf_hwcap |= HWCAP_MIPS_R6; + + if (cpu_has_msa) { + c->msa_id = cpu_get_msa_id(); + WARN(c->msa_id & MSA_IR_WRPF, + "Vector register partitioning unimplemented!"); + elf_hwcap |= HWCAP_MIPS_MSA; + } + + if (cpu_has_mips16) + elf_hwcap |= HWCAP_MIPS_MIPS16; + + if (cpu_has_mdmx) + elf_hwcap |= HWCAP_MIPS_MDMX; + + if (cpu_has_mips3d) + elf_hwcap |= HWCAP_MIPS_MIPS3D; + + if (cpu_has_smartmips) + elf_hwcap |= HWCAP_MIPS_SMARTMIPS; + + if (cpu_has_dsp) + elf_hwcap |= HWCAP_MIPS_DSP; + + if (cpu_has_dsp2) + elf_hwcap |= HWCAP_MIPS_DSP2; + + if (cpu_has_dsp3) + elf_hwcap |= HWCAP_MIPS_DSP3; + + if (cpu_has_mips16e2) + elf_hwcap |= HWCAP_MIPS_MIPS16E2; + + if (cpu_has_loongson_mmi) + elf_hwcap |= HWCAP_LOONGSON_MMI; + + if (cpu_has_loongson_ext) + elf_hwcap |= HWCAP_LOONGSON_EXT; + + if (cpu_has_loongson_ext2) + elf_hwcap |= HWCAP_LOONGSON_EXT2; + + if (cpu_has_vz) + cpu_probe_vz(c); + + cpu_probe_vmbits(c); + + /* Synthesize CPUCFG data if running on Loongson processors; + * no-op otherwise. + * + * This looks at previously probed features, so keep this at bottom. + */ + loongson3_cpucfg_synthesize_data(c); + +#ifdef CONFIG_64BIT + if (cpu == 0) + __ua_limit = ~((1ull << cpu_vmbits) - 1); +#endif +} + +void cpu_report(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + pr_info("CPU%d revision is: %08x (%s)\n", + smp_processor_id(), c->processor_id, cpu_name_string()); + if (c->options & MIPS_CPU_FPU) + printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id); + if (cpu_has_msa) + pr_info("MSA revision is: %08x\n", c->msa_id); +} + +void cpu_set_cluster(struct cpuinfo_mips *cpuinfo, unsigned int cluster) +{ + /* Ensure the core number fits in the field */ + WARN_ON(cluster > (MIPS_GLOBALNUMBER_CLUSTER >> + MIPS_GLOBALNUMBER_CLUSTER_SHF)); + + cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CLUSTER; + cpuinfo->globalnumber |= cluster << MIPS_GLOBALNUMBER_CLUSTER_SHF; +} + +void cpu_set_core(struct cpuinfo_mips *cpuinfo, unsigned int core) +{ + /* Ensure the core number fits in the field */ + WARN_ON(core > (MIPS_GLOBALNUMBER_CORE >> MIPS_GLOBALNUMBER_CORE_SHF)); + + cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_CORE; + cpuinfo->globalnumber |= core << MIPS_GLOBALNUMBER_CORE_SHF; +} + +void cpu_set_vpe_id(struct cpuinfo_mips *cpuinfo, unsigned int vpe) +{ + /* Ensure the VP(E) ID fits in the field */ + WARN_ON(vpe > (MIPS_GLOBALNUMBER_VP >> MIPS_GLOBALNUMBER_VP_SHF)); + + /* Ensure we're not using VP(E)s without support */ + WARN_ON(vpe && !IS_ENABLED(CONFIG_MIPS_MT_SMP) && + !IS_ENABLED(CONFIG_CPU_MIPSR6)); + + cpuinfo->globalnumber &= ~MIPS_GLOBALNUMBER_VP; + cpuinfo->globalnumber |= vpe << MIPS_GLOBALNUMBER_VP_SHF; +} diff --git a/arch/mips/kernel/cpu-r3k-probe.c b/arch/mips/kernel/cpu-r3k-probe.c new file mode 100644 index 000000000..abdbbe8c5 --- /dev/null +++ b/arch/mips/kernel/cpu-r3k-probe.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Processor capabilities determination functions. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/smp.h> +#include <linux/stddef.h> +#include <linux/export.h> + +#include <asm/bugs.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/cpu-type.h> +#include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/elf.h> + +#include "fpu-probe.h" + +/* Hardware capabilities */ +unsigned int elf_hwcap __read_mostly; +EXPORT_SYMBOL_GPL(elf_hwcap); + +void __init check_bugs32(void) +{ + +} + +/* + * Probe whether cpu has config register by trying to play with + * alternate cache bit and see whether it matters. + * It's used by cpu_probe to distinguish between R3000A and R3081. + */ +static inline int cpu_has_confreg(void) +{ +#ifdef CONFIG_CPU_R3000 + extern unsigned long r3k_cache_size(unsigned long); + unsigned long size1, size2; + unsigned long cfg = read_c0_conf(); + + size1 = r3k_cache_size(ST0_ISC); + write_c0_conf(cfg ^ R30XX_CONF_AC); + size2 = r3k_cache_size(ST0_ISC); + write_c0_conf(cfg); + return size1 != size2; +#else + return 0; +#endif +} + +static inline void set_elf_platform(int cpu, const char *plat) +{ + if (cpu == 0) + __elf_platform = plat; +} + +const char *__cpu_name[NR_CPUS]; +const char *__elf_platform; +const char *__elf_base_platform; + +void cpu_probe(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned int cpu = smp_processor_id(); + + /* + * Set a default elf platform, cpu probe may later + * overwrite it with a more precise value + */ + set_elf_platform(cpu, "mips"); + + c->processor_id = PRID_IMP_UNKNOWN; + c->fpu_id = FPIR_IMP_NONE; + c->cputype = CPU_UNKNOWN; + c->writecombine = _CACHE_UNCACHED; + + c->fpu_csr31 = FPU_CSR_RN; + c->fpu_msk31 = FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | + FPU_CSR_CONDX | FPU_CSR_FS; + + c->srsets = 1; + + c->processor_id = read_c0_prid(); + switch (c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) { + case PRID_COMP_LEGACY | PRID_IMP_R2000: + c->cputype = CPU_R2000; + __cpu_name[cpu] = "R2000"; + c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | + MIPS_CPU_NOFPUEX; + if (__cpu_has_fpu()) + c->options |= MIPS_CPU_FPU; + c->tlbsize = 64; + break; + case PRID_COMP_LEGACY | PRID_IMP_R3000: + if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) { + if (cpu_has_confreg()) { + c->cputype = CPU_R3081E; + __cpu_name[cpu] = "R3081"; + } else { + c->cputype = CPU_R3000A; + __cpu_name[cpu] = "R3000A"; + } + } else { + c->cputype = CPU_R3000; + __cpu_name[cpu] = "R3000"; + } + c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE | + MIPS_CPU_NOFPUEX; + if (__cpu_has_fpu()) + c->options |= MIPS_CPU_FPU; + c->tlbsize = 64; + break; + case PRID_COMP_LEGACY | PRID_IMP_TX39: + c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE; + + if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) { + c->cputype = CPU_TX3927; + __cpu_name[cpu] = "TX3927"; + c->tlbsize = 64; + } else { + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_TX3912: + c->cputype = CPU_TX3912; + __cpu_name[cpu] = "TX3912"; + c->tlbsize = 32; + break; + case PRID_REV_TX3922: + c->cputype = CPU_TX3922; + __cpu_name[cpu] = "TX3922"; + c->tlbsize = 64; + break; + } + } + break; + } + + BUG_ON(!__cpu_name[cpu]); + BUG_ON(c->cputype == CPU_UNKNOWN); + + /* + * Platform code can force the cpu type to optimize code + * generation. In that case be sure the cpu type is correctly + * manually setup otherwise it could trigger some nasty bugs. + */ + BUG_ON(current_cpu_type() != c->cputype); + + if (mips_fpu_disabled) + c->options &= ~MIPS_CPU_FPU; + + if (c->options & MIPS_CPU_FPU) + cpu_set_fpu_opts(c); + else + cpu_set_nofpu_opts(c); +} + +void cpu_report(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + pr_info("CPU%d revision is: %08x (%s)\n", + smp_processor_id(), c->processor_id, cpu_name_string()); + if (c->options & MIPS_CPU_FPU) + pr_info("FPU revision is: %08x\n", c->fpu_id); +} diff --git a/arch/mips/kernel/crash.c b/arch/mips/kernel/crash.c new file mode 100644 index 000000000..81845ba04 --- /dev/null +++ b/arch/mips/kernel/crash.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/kernel.h> +#include <linux/smp.h> +#include <linux/reboot.h> +#include <linux/kexec.h> +#include <linux/memblock.h> +#include <linux/crash_dump.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/sched/task_stack.h> + +/* This keeps a track of which one is crashing cpu. */ +static int crashing_cpu = -1; +static cpumask_t cpus_in_crash = CPU_MASK_NONE; + +#ifdef CONFIG_SMP +static void crash_shutdown_secondary(void *passed_regs) +{ + struct pt_regs *regs = passed_regs; + int cpu = smp_processor_id(); + + /* + * If we are passed registers, use those. Otherwise get the + * regs from the last interrupt, which should be correct, as + * we are in an interrupt. But if the regs are not there, + * pull them from the top of the stack. They are probably + * wrong, but we need something to keep from crashing again. + */ + if (!regs) + regs = get_irq_regs(); + if (!regs) + regs = task_pt_regs(current); + + if (!cpu_online(cpu)) + return; + + /* We won't be sent IPIs any more. */ + set_cpu_online(cpu, false); + + local_irq_disable(); + if (!cpumask_test_cpu(cpu, &cpus_in_crash)) + crash_save_cpu(regs, cpu); + cpumask_set_cpu(cpu, &cpus_in_crash); + + while (!atomic_read(&kexec_ready_to_reboot)) + cpu_relax(); + + kexec_reboot(); + + /* NOTREACHED */ +} + +static void crash_kexec_prepare_cpus(void) +{ + static int cpus_stopped; + unsigned int msecs; + unsigned int ncpus; + + if (cpus_stopped) + return; + + ncpus = num_online_cpus() - 1;/* Excluding the panic cpu */ + + smp_call_function(crash_shutdown_secondary, NULL, 0); + smp_wmb(); + + /* + * The crash CPU sends an IPI and wait for other CPUs to + * respond. Delay of at least 10 seconds. + */ + pr_emerg("Sending IPI to other cpus...\n"); + msecs = 10000; + while ((cpumask_weight(&cpus_in_crash) < ncpus) && (--msecs > 0)) { + cpu_relax(); + mdelay(1); + } + + cpus_stopped = 1; +} + +/* Override the weak function in kernel/panic.c */ +void crash_smp_send_stop(void) +{ + if (_crash_smp_send_stop) + _crash_smp_send_stop(); + + crash_kexec_prepare_cpus(); +} + +#else /* !defined(CONFIG_SMP) */ +static void crash_kexec_prepare_cpus(void) {} +#endif /* !defined(CONFIG_SMP) */ + +void default_machine_crash_shutdown(struct pt_regs *regs) +{ + local_irq_disable(); + crashing_cpu = smp_processor_id(); + crash_save_cpu(regs, crashing_cpu); + crash_kexec_prepare_cpus(); + cpumask_set_cpu(crashing_cpu, &cpus_in_crash); +} diff --git a/arch/mips/kernel/crash_dump.c b/arch/mips/kernel/crash_dump.c new file mode 100644 index 000000000..01b2bd95b --- /dev/null +++ b/arch/mips/kernel/crash_dump.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/highmem.h> +#include <linux/memblock.h> +#include <linux/crash_dump.h> +#include <linux/uaccess.h> +#include <linux/slab.h> + +static void *kdump_buf_page; + +/** + * copy_oldmem_page - copy one page from "oldmem" + * @pfn: page frame number to be copied + * @buf: target memory address for the copy; this can be in kernel address + * space or user address space (see @userbuf) + * @csize: number of bytes to copy + * @offset: offset in bytes into the page (based on pfn) to begin the copy + * @userbuf: if set, @buf is in user address space, use copy_to_user(), + * otherwise @buf is in kernel address space, use memcpy(). + * + * Copy a page from "oldmem". For this page, there is no pte mapped + * in the current kernel. + * + * Calling copy_to_user() in atomic context is not desirable. Hence first + * copying the data to a pre-allocated kernel page and then copying to user + * space in non-atomic context. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = kmap_atomic_pfn(pfn); + + if (!userbuf) { + memcpy(buf, (vaddr + offset), csize); + kunmap_atomic(vaddr); + } else { + if (!kdump_buf_page) { + pr_warn("Kdump: Kdump buffer page not allocated\n"); + + return -EFAULT; + } + copy_page(kdump_buf_page, vaddr); + kunmap_atomic(vaddr); + if (copy_to_user(buf, (kdump_buf_page + offset), csize)) + return -EFAULT; + } + + return csize; +} + +static int __init kdump_buf_page_init(void) +{ + int ret = 0; + + kdump_buf_page = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!kdump_buf_page) { + pr_warn("Kdump: Failed to allocate kdump buffer page\n"); + ret = -ENOMEM; + } + + return ret; +} +arch_initcall(kdump_buf_page_init); diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c new file mode 100644 index 000000000..6c18a138f --- /dev/null +++ b/arch/mips/kernel/csrc-bcm1480.c @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000,2001,2004 Broadcom Corporation + */ +#include <linux/clocksource.h> +#include <linux/sched_clock.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/bcm1480_int.h> +#include <asm/sibyte/bcm1480_scd.h> + +#include <asm/sibyte/sb1250.h> + +static u64 bcm1480_hpt_read(struct clocksource *cs) +{ + return (u64) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT)); +} + +struct clocksource bcm1480_clocksource = { + .name = "zbbus-cycles", + .rating = 200, + .read = bcm1480_hpt_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static u64 notrace sb1480_read_sched_clock(void) +{ + return __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT)); +} + +void __init sb1480_clocksource_init(void) +{ + struct clocksource *cs = &bcm1480_clocksource; + unsigned int plldiv; + unsigned long zbbus; + + plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); + zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000); + clocksource_register_hz(cs, zbbus); + + sched_clock_register(sb1480_read_sched_clock, 64, zbbus); +} diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c new file mode 100644 index 000000000..bad740ad3 --- /dev/null +++ b/arch/mips/kernel/csrc-ioasic.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * DEC I/O ASIC's counter clocksource + * + * Copyright (C) 2008 Yoichi Yuasa <yuasa@linux-mips.org> + */ +#include <linux/clocksource.h> +#include <linux/sched_clock.h> +#include <linux/init.h> + +#include <asm/ds1287.h> +#include <asm/time.h> +#include <asm/dec/ioasic.h> +#include <asm/dec/ioasic_addrs.h> + +static u64 dec_ioasic_hpt_read(struct clocksource *cs) +{ + return ioasic_read(IO_REG_FCTR); +} + +static struct clocksource clocksource_dec = { + .name = "dec-ioasic", + .read = dec_ioasic_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static u64 notrace dec_ioasic_read_sched_clock(void) +{ + return ioasic_read(IO_REG_FCTR); +} + +int __init dec_ioasic_clocksource_init(void) +{ + unsigned int freq; + u32 start, end; + int i = HZ / 8; + + ds1287_timer_state(); + while (!ds1287_timer_state()) + ; + + start = dec_ioasic_hpt_read(&clocksource_dec); + + while (i--) + while (!ds1287_timer_state()) + ; + + end = dec_ioasic_hpt_read(&clocksource_dec); + + freq = (end - start) * 8; + + /* An early revision of the I/O ASIC didn't have the counter. */ + if (!freq) + return -ENXIO; + + printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); + + clocksource_dec.rating = 200 + freq / 10000000; + clocksource_register_hz(&clocksource_dec, freq); + + sched_clock_register(dec_ioasic_read_sched_clock, 32, freq); + + return 0; +} diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c new file mode 100644 index 000000000..edc4afc08 --- /dev/null +++ b/arch/mips/kernel/csrc-r4k.c @@ -0,0 +1,130 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 by Ralf Baechle + */ +#include <linux/clocksource.h> +#include <linux/cpufreq.h> +#include <linux/init.h> +#include <linux/sched_clock.h> + +#include <asm/time.h> + +static u64 c0_hpt_read(struct clocksource *cs) +{ + return read_c0_count(); +} + +static struct clocksource clocksource_mips = { + .name = "MIPS", + .read = c0_hpt_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static u64 __maybe_unused notrace r4k_read_sched_clock(void) +{ + return read_c0_count(); +} + +static inline unsigned int rdhwr_count(void) +{ + unsigned int count; + + __asm__ __volatile__( + " .set push\n" + " .set mips32r2\n" + " rdhwr %0, $2\n" + " .set pop\n" + : "=r" (count)); + + return count; +} + +static bool rdhwr_count_usable(void) +{ + unsigned int prev, curr, i; + + /* + * Older QEMUs have a broken implementation of RDHWR for the CP0 count + * which always returns a constant value. Try to identify this and don't + * use it in the VDSO if it is broken. This workaround can be removed + * once the fix has been in QEMU stable for a reasonable amount of time. + */ + for (i = 0, prev = rdhwr_count(); i < 100; i++) { + curr = rdhwr_count(); + + if (curr != prev) + return true; + + prev = curr; + } + + pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n"); + return false; +} + +#ifdef CONFIG_CPU_FREQ + +static bool __read_mostly r4k_clock_unstable; + +static void r4k_clocksource_unstable(char *reason) +{ + if (r4k_clock_unstable) + return; + + r4k_clock_unstable = true; + + pr_info("R4K timer is unstable due to %s\n", reason); + + clocksource_mark_unstable(&clocksource_mips); +} + +static int r4k_cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + r4k_clocksource_unstable("CPU frequency change"); + + return 0; +} + +static struct notifier_block r4k_cpufreq_notifier = { + .notifier_call = r4k_cpufreq_callback, +}; + +static int __init r4k_register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&r4k_cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); + +} +core_initcall(r4k_register_cpufreq_notifier); + +#endif /* !CONFIG_CPU_FREQ */ + +int __init init_r4k_clocksource(void) +{ + if (!cpu_has_counter || !mips_hpt_frequency) + return -ENXIO; + + /* Calculate a somewhat reasonable rating value */ + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + + /* + * R2 onwards makes the count accessible to user mode so it can be used + * by the VDSO (HWREna is configured by configure_hwrena()). + */ + if (cpu_has_mips_r2_r6 && rdhwr_count_usable()) + clocksource_mips.vdso_clock_mode = VDSO_CLOCKMODE_R4K; + + clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); + +#ifndef CONFIG_CPU_FREQ + sched_clock_register(r4k_read_sched_clock, 32, mips_hpt_frequency); +#endif + + return 0; +} diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c new file mode 100644 index 000000000..fa2fa3e10 --- /dev/null +++ b/arch/mips/kernel/csrc-sb1250.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2000, 2001 Broadcom Corporation + */ +#include <linux/clocksource.h> +#include <linux/sched_clock.h> + +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/time.h> + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_scd.h> + +#define SB1250_HPT_NUM 3 +#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ + +/* + * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over + * again. + */ +static inline u64 sb1250_hpt_get_cycles(void) +{ + unsigned int count; + void __iomem *addr; + + addr = IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)); + count = G_SCD_TIMER_CNT(__raw_readq(addr)); + + return SB1250_HPT_VALUE - count; +} + +static u64 sb1250_hpt_read(struct clocksource *cs) +{ + return sb1250_hpt_get_cycles(); +} + +struct clocksource bcm1250_clocksource = { + .name = "bcm1250-counter-3", + .rating = 200, + .read = sb1250_hpt_read, + .mask = CLOCKSOURCE_MASK(23), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static u64 notrace sb1250_read_sched_clock(void) +{ + return sb1250_hpt_get_cycles(); +} + +void __init sb1250_clocksource_init(void) +{ + struct clocksource *cs = &bcm1250_clocksource; + + /* Setup hpt using timer #3 but do not enable irq for it */ + __raw_writeq(0, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, + R_SCD_TIMER_CFG))); + __raw_writeq(SB1250_HPT_VALUE, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, + R_SCD_TIMER_INIT))); + __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, + IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, + R_SCD_TIMER_CFG))); + + clocksource_register_hz(cs, V_SCD_TIMER_FREQ); + + sched_clock_register(sb1250_read_sched_clock, 23, V_SCD_TIMER_FREQ); +} diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c new file mode 100644 index 000000000..4a1647ddf --- /dev/null +++ b/arch/mips/kernel/early_printk.c @@ -0,0 +1,41 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2003, 06, 07 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2007 MIPS Technologies, Inc. + * written by Ralf Baechle (ralf@linux-mips.org) + */ +#include <linux/kernel.h> +#include <linux/console.h> +#include <linux/printk.h> +#include <linux/init.h> + +#include <asm/setup.h> + +static void early_console_write(struct console *con, const char *s, unsigned n) +{ + while (n-- && *s) { + if (*s == '\n') + prom_putchar('\r'); + prom_putchar(*s); + s++; + } +} + +static struct console early_console_prom = { + .name = "early", + .write = early_console_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +void __init setup_early_printk(void) +{ + if (early_console) + return; + early_console = &early_console_prom; + + register_console(&early_console_prom); +} diff --git a/arch/mips/kernel/early_printk_8250.c b/arch/mips/kernel/early_printk_8250.c new file mode 100644 index 000000000..567c6ec0c --- /dev/null +++ b/arch/mips/kernel/early_printk_8250.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * 8250/16550-type serial ports prom_putchar() + * + * Copyright (C) 2010 Yoichi Yuasa <yuasa@linux-mips.org> + */ +#include <linux/io.h> +#include <linux/serial_core.h> +#include <linux/serial_reg.h> +#include <asm/setup.h> + +static void __iomem *serial8250_base; +static unsigned int serial8250_reg_shift; +static unsigned int serial8250_tx_timeout; + +void setup_8250_early_printk_port(unsigned long base, unsigned int reg_shift, + unsigned int timeout) +{ + serial8250_base = (void __iomem *)base; + serial8250_reg_shift = reg_shift; + serial8250_tx_timeout = timeout; +} + +static inline u8 serial_in(int offset) +{ + return readb(serial8250_base + (offset << serial8250_reg_shift)); +} + +static inline void serial_out(int offset, char value) +{ + writeb(value, serial8250_base + (offset << serial8250_reg_shift)); +} + +void prom_putchar(char c) +{ + unsigned int timeout; + int status, bits; + + if (!serial8250_base) + return; + + timeout = serial8250_tx_timeout; + bits = UART_LSR_TEMT | UART_LSR_THRE; + + do { + status = serial_in(UART_LSR); + + if (--timeout == 0) + break; + } while ((status & bits) != bits); + + if (timeout) + serial_out(UART_TX, c); +} diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c new file mode 100644 index 000000000..7b045d2a0 --- /dev/null +++ b/arch/mips/kernel/elf.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2014 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <linux/binfmts.h> +#include <linux/elf.h> +#include <linux/export.h> +#include <linux/sched.h> + +#include <asm/cpu-features.h> +#include <asm/cpu-info.h> + +#ifdef CONFIG_MIPS_FP_SUPPORT + +/* Whether to accept legacy-NaN and 2008-NaN user binaries. */ +bool mips_use_nan_legacy; +bool mips_use_nan_2008; + +/* FPU modes */ +enum { + FP_FRE, + FP_FR0, + FP_FR1, +}; + +/** + * struct mode_req - ABI FPU mode requirements + * @single: The program being loaded needs an FPU but it will only issue + * single precision instructions meaning that it can execute in + * either FR0 or FR1. + * @soft: The soft(-float) requirement means that the program being + * loaded needs has no FPU dependency at all (i.e. it has no + * FPU instructions). + * @fr1: The program being loaded depends on FPU being in FR=1 mode. + * @frdefault: The program being loaded depends on the default FPU mode. + * That is FR0 for O32 and FR1 for N32/N64. + * @fre: The program being loaded depends on FPU with FRE=1. This mode is + * a bridge which uses FR=1 whilst still being able to maintain + * full compatibility with pre-existing code using the O32 FP32 + * ABI. + * + * More information about the FP ABIs can be found here: + * + * https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#10.4.1._Basic_mode_set-up + * + */ + +struct mode_req { + bool single; + bool soft; + bool fr1; + bool frdefault; + bool fre; +}; + +static const struct mode_req fpu_reqs[] = { + [MIPS_ABI_FP_ANY] = { true, true, true, true, true }, + [MIPS_ABI_FP_DOUBLE] = { false, false, false, true, true }, + [MIPS_ABI_FP_SINGLE] = { true, false, false, false, false }, + [MIPS_ABI_FP_SOFT] = { false, true, false, false, false }, + [MIPS_ABI_FP_OLD_64] = { false, false, false, false, false }, + [MIPS_ABI_FP_XX] = { false, false, true, true, true }, + [MIPS_ABI_FP_64] = { false, false, true, false, false }, + [MIPS_ABI_FP_64A] = { false, false, true, false, true } +}; + +/* + * Mode requirements when .MIPS.abiflags is not present in the ELF. + * Not present means that everything is acceptable except FR1. + */ +static struct mode_req none_req = { true, true, false, true, true }; + +int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf, + bool is_interp, struct arch_elf_state *state) +{ + union { + struct elf32_hdr e32; + struct elf64_hdr e64; + } *ehdr = _ehdr; + struct elf32_phdr *phdr32 = _phdr; + struct elf64_phdr *phdr64 = _phdr; + struct mips_elf_abiflags_v0 abiflags; + bool elf32; + u32 flags; + int ret; + loff_t pos; + + elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32; + flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags; + + /* Let's see if this is an O32 ELF */ + if (elf32) { + if (flags & EF_MIPS_FP64) { + /* + * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it + * later if needed + */ + if (is_interp) + state->interp_fp_abi = MIPS_ABI_FP_OLD_64; + else + state->fp_abi = MIPS_ABI_FP_OLD_64; + } + if (phdr32->p_type != PT_MIPS_ABIFLAGS) + return 0; + + if (phdr32->p_filesz < sizeof(abiflags)) + return -EINVAL; + pos = phdr32->p_offset; + } else { + if (phdr64->p_type != PT_MIPS_ABIFLAGS) + return 0; + if (phdr64->p_filesz < sizeof(abiflags)) + return -EINVAL; + pos = phdr64->p_offset; + } + + ret = kernel_read(elf, &abiflags, sizeof(abiflags), &pos); + if (ret < 0) + return ret; + if (ret != sizeof(abiflags)) + return -EIO; + + /* Record the required FP ABIs for use by mips_check_elf */ + if (is_interp) + state->interp_fp_abi = abiflags.fp_abi; + else + state->fp_abi = abiflags.fp_abi; + + return 0; +} + +int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr, + struct arch_elf_state *state) +{ + union { + struct elf32_hdr e32; + struct elf64_hdr e64; + } *ehdr = _ehdr; + union { + struct elf32_hdr e32; + struct elf64_hdr e64; + } *iehdr = _interp_ehdr; + struct mode_req prog_req, interp_req; + int fp_abi, interp_fp_abi, abi0, abi1, max_abi; + bool elf32; + u32 flags; + + elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32; + flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags; + + /* + * Determine the NaN personality, reject the binary if not allowed. + * Also ensure that any interpreter matches the executable. + */ + if (flags & EF_MIPS_NAN2008) { + if (mips_use_nan_2008) + state->nan_2008 = 1; + else + return -ENOEXEC; + } else { + if (mips_use_nan_legacy) + state->nan_2008 = 0; + else + return -ENOEXEC; + } + if (has_interpreter) { + bool ielf32; + u32 iflags; + + ielf32 = iehdr->e32.e_ident[EI_CLASS] == ELFCLASS32; + iflags = ielf32 ? iehdr->e32.e_flags : iehdr->e64.e_flags; + + if ((flags ^ iflags) & EF_MIPS_NAN2008) + return -ELIBBAD; + } + + if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT)) + return 0; + + fp_abi = state->fp_abi; + + if (has_interpreter) { + interp_fp_abi = state->interp_fp_abi; + + abi0 = min(fp_abi, interp_fp_abi); + abi1 = max(fp_abi, interp_fp_abi); + } else { + abi0 = abi1 = fp_abi; + } + + if (elf32 && !(flags & EF_MIPS_ABI2)) { + /* Default to a mode capable of running code expecting FR=0 */ + state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0; + + /* Allow all ABIs we know about */ + max_abi = MIPS_ABI_FP_64A; + } else { + /* MIPS64 code always uses FR=1, thus the default is easy */ + state->overall_fp_mode = FP_FR1; + + /* Disallow access to the various FPXX & FP64 ABIs */ + max_abi = MIPS_ABI_FP_SOFT; + } + + if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) || + (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN)) + return -ELIBBAD; + + /* It's time to determine the FPU mode requirements */ + prog_req = (abi0 == MIPS_ABI_FP_UNKNOWN) ? none_req : fpu_reqs[abi0]; + interp_req = (abi1 == MIPS_ABI_FP_UNKNOWN) ? none_req : fpu_reqs[abi1]; + + /* + * Check whether the program's and interp's ABIs have a matching FPU + * mode requirement. + */ + prog_req.single = interp_req.single && prog_req.single; + prog_req.soft = interp_req.soft && prog_req.soft; + prog_req.fr1 = interp_req.fr1 && prog_req.fr1; + prog_req.frdefault = interp_req.frdefault && prog_req.frdefault; + prog_req.fre = interp_req.fre && prog_req.fre; + + /* + * Determine the desired FPU mode + * + * Decision making: + * + * - We want FR_FRE if FRE=1 and both FR=1 and FR=0 are false. This + * means that we have a combination of program and interpreter + * that inherently require the hybrid FP mode. + * - If FR1 and FRDEFAULT is true, that means we hit the any-abi or + * fpxx case. This is because, in any-ABI (or no-ABI) we have no FPU + * instructions so we don't care about the mode. We will simply use + * the one preferred by the hardware. In fpxx case, that ABI can + * handle both FR=1 and FR=0, so, again, we simply choose the one + * preferred by the hardware. Next, if we only use single-precision + * FPU instructions, and the default ABI FPU mode is not good + * (ie single + any ABI combination), we set again the FPU mode to the + * one is preferred by the hardware. Next, if we know that the code + * will only use single-precision instructions, shown by single being + * true but frdefault being false, then we again set the FPU mode to + * the one that is preferred by the hardware. + * - We want FP_FR1 if that's the only matching mode and the default one + * is not good. + * - Return with -ELIBADD if we can't find a matching FPU mode. + */ + if (prog_req.fre && !prog_req.frdefault && !prog_req.fr1) + state->overall_fp_mode = FP_FRE; + else if ((prog_req.fr1 && prog_req.frdefault) || + (prog_req.single && !prog_req.frdefault)) + /* Make sure 64-bit MIPS III/IV/64R1 will not pick FR1 */ + state->overall_fp_mode = ((raw_current_cpu_data.fpu_id & MIPS_FPIR_F64) && + cpu_has_mips_r2_r6) ? + FP_FR1 : FP_FR0; + else if (prog_req.fr1) + state->overall_fp_mode = FP_FR1; + else if (!prog_req.fre && !prog_req.frdefault && + !prog_req.fr1 && !prog_req.single && !prog_req.soft) + return -ELIBBAD; + + return 0; +} + +static inline void set_thread_fp_mode(int hybrid, int regs32) +{ + if (hybrid) + set_thread_flag(TIF_HYBRID_FPREGS); + else + clear_thread_flag(TIF_HYBRID_FPREGS); + if (regs32) + set_thread_flag(TIF_32BIT_FPREGS); + else + clear_thread_flag(TIF_32BIT_FPREGS); +} + +void mips_set_personality_fp(struct arch_elf_state *state) +{ + /* + * This function is only ever called for O32 ELFs so we should + * not be worried about N32/N64 binaries. + */ + + if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT)) + return; + + switch (state->overall_fp_mode) { + case FP_FRE: + set_thread_fp_mode(1, 0); + break; + case FP_FR0: + set_thread_fp_mode(0, 1); + break; + case FP_FR1: + set_thread_fp_mode(0, 0); + break; + default: + BUG(); + } +} + +/* + * Select the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode + * in FCSR according to the ELF NaN personality. + */ +void mips_set_personality_nan(struct arch_elf_state *state) +{ + struct cpuinfo_mips *c = &boot_cpu_data; + struct task_struct *t = current; + + t->thread.fpu.fcr31 = c->fpu_csr31; + switch (state->nan_2008) { + case 0: + break; + case 1: + if (!(c->fpu_msk31 & FPU_CSR_NAN2008)) + t->thread.fpu.fcr31 |= FPU_CSR_NAN2008; + if (!(c->fpu_msk31 & FPU_CSR_ABS2008)) + t->thread.fpu.fcr31 |= FPU_CSR_ABS2008; + break; + default: + BUG(); + } +} + +#endif /* CONFIG_MIPS_FP_SUPPORT */ + +int mips_elf_read_implies_exec(void *elf_ex, int exstack) +{ + if (exstack != EXSTACK_DISABLE_X) { + /* The binary doesn't request a non-executable stack */ + return 1; + } + + if (!cpu_has_rixi) { + /* The CPU doesn't support non-executable memory */ + return 1; + } + + return 0; +} +EXPORT_SYMBOL(mips_elf_read_implies_exec); diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S new file mode 100644 index 000000000..4b896f502 --- /dev/null +++ b/arch/mips/kernel/entry.S @@ -0,0 +1,186 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/compiler.h> +#include <asm/irqflags.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/isadep.h> +#include <asm/thread_info.h> +#include <asm/war.h> + +#ifndef CONFIG_PREEMPTION +#define resume_kernel restore_all +#else +#define __ret_from_irq ret_from_exception +#endif + + .text + .align 5 +#ifndef CONFIG_PREEMPTION +FEXPORT(ret_from_exception) + local_irq_disable # preempt stop + b __ret_from_irq +#endif +FEXPORT(ret_from_irq) + LONG_S s0, TI_REGS($28) +FEXPORT(__ret_from_irq) +/* + * We can be coming here from a syscall done in the kernel space, + * e.g. a failed kernel_execve(). + */ +resume_userspace_check: + LONG_L t0, PT_STATUS(sp) # returning to kernel mode? + andi t0, t0, KU_USER + beqz t0, resume_kernel + +resume_userspace: + local_irq_disable # make sure we dont miss an + # interrupt setting need_resched + # between sampling and return + LONG_L a2, TI_FLAGS($28) # current->work + andi t0, a2, _TIF_WORK_MASK # (ignoring syscall_trace) + bnez t0, work_pending + j restore_all + +#ifdef CONFIG_PREEMPTION +resume_kernel: + local_irq_disable + lw t0, TI_PRE_COUNT($28) + bnez t0, restore_all + LONG_L t0, TI_FLAGS($28) + andi t1, t0, _TIF_NEED_RESCHED + beqz t1, restore_all + LONG_L t0, PT_STATUS(sp) # Interrupts off? + andi t0, 1 + beqz t0, restore_all + PTR_LA ra, restore_all + j preempt_schedule_irq +#endif + +FEXPORT(ret_from_kernel_thread) + jal schedule_tail # a0 = struct task_struct *prev + move a0, s1 + jal s0 + j syscall_exit + +FEXPORT(ret_from_fork) + jal schedule_tail # a0 = struct task_struct *prev + +FEXPORT(syscall_exit) +#ifdef CONFIG_DEBUG_RSEQ + move a0, sp + jal rseq_syscall +#endif + local_irq_disable # make sure need_resched and + # signals dont change between + # sampling and return + LONG_L a2, TI_FLAGS($28) # current->work + li t0, _TIF_ALLWORK_MASK + and t0, a2, t0 + bnez t0, syscall_exit_work + +restore_all: # restore full frame + .set noat + RESTORE_TEMP + RESTORE_AT + RESTORE_STATIC +restore_partial: # restore partial frame +#ifdef CONFIG_TRACE_IRQFLAGS + SAVE_STATIC + SAVE_AT + SAVE_TEMP + LONG_L v0, PT_STATUS(sp) +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + and v0, ST0_IEP +#else + and v0, ST0_IE +#endif + beqz v0, 1f + jal trace_hardirqs_on + b 2f +1: jal trace_hardirqs_off +2: + RESTORE_TEMP + RESTORE_AT + RESTORE_STATIC +#endif + RESTORE_SOME + RESTORE_SP_AND_RET + .set at + +work_pending: + andi t0, a2, _TIF_NEED_RESCHED # a2 is preloaded with TI_FLAGS + beqz t0, work_notifysig +work_resched: + TRACE_IRQS_OFF + jal schedule + + local_irq_disable # make sure need_resched and + # signals dont change between + # sampling and return + LONG_L a2, TI_FLAGS($28) + andi t0, a2, _TIF_WORK_MASK # is there any work to be done + # other than syscall tracing? + beqz t0, restore_all + andi t0, a2, _TIF_NEED_RESCHED + bnez t0, work_resched + +work_notifysig: # deal with pending signals and + # notify-resume requests + move a0, sp + li a1, 0 + jal do_notify_resume # a2 already loaded + j resume_userspace_check + +FEXPORT(syscall_exit_partial) +#ifdef CONFIG_DEBUG_RSEQ + move a0, sp + jal rseq_syscall +#endif + local_irq_disable # make sure need_resched doesn't + # change between and return + LONG_L a2, TI_FLAGS($28) # current->work + li t0, _TIF_ALLWORK_MASK + and t0, a2 + beqz t0, restore_partial + SAVE_STATIC +syscall_exit_work: + LONG_L t0, PT_STATUS(sp) # returning to kernel mode? + andi t0, t0, KU_USER + beqz t0, resume_kernel + li t0, _TIF_WORK_SYSCALL_EXIT + and t0, a2 # a2 is preloaded with TI_FLAGS + beqz t0, work_pending # trace bit set? + local_irq_enable # could let syscall_trace_leave() + # call schedule() instead + TRACE_IRQS_ON + move a0, sp + jal syscall_trace_leave + b resume_userspace + +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ + defined(CONFIG_CPU_MIPSR6) || defined(CONFIG_MIPS_MT) + +/* + * MIPS32R2 Instruction Hazard Barrier - must be called + * + * For C code use the inline version named instruction_hazard(). + */ +LEAF(mips_ihb) + .set MIPS_ISA_LEVEL_RAW + jr.hb ra + nop + END(mips_ihb) + +#endif /* CONFIG_CPU_MIPSR2 - CONFIG_CPU_MIPSR6 or CONFIG_MIPS_MT */ diff --git a/arch/mips/kernel/fpu-probe.c b/arch/mips/kernel/fpu-probe.c new file mode 100644 index 000000000..e689d6a83 --- /dev/null +++ b/arch/mips/kernel/fpu-probe.c @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Processor capabilities determination functions. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + */ + +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/bugs.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/cpu-type.h> +#include <asm/elf.h> +#include <asm/fpu.h> +#include <asm/mipsregs.h> + +#include "fpu-probe.h" + +/* + * Get the FPU Implementation/Revision. + */ +static inline unsigned long cpu_get_fpu_id(void) +{ + unsigned long tmp, fpu_id; + + tmp = read_c0_status(); + __enable_fpu(FPU_AS_IS); + fpu_id = read_32bit_cp1_register(CP1_REVISION); + write_c0_status(tmp); + return fpu_id; +} + +/* + * Check if the CPU has an external FPU. + */ +int __cpu_has_fpu(void) +{ + return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE; +} + +/* + * Determine the FCSR mask for FPU hardware. + */ +static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c) +{ + unsigned long sr, mask, fcsr, fcsr0, fcsr1; + + fcsr = c->fpu_csr31; + mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM; + + sr = read_c0_status(); + __enable_fpu(FPU_AS_IS); + + fcsr0 = fcsr & mask; + write_32bit_cp1_register(CP1_STATUS, fcsr0); + fcsr0 = read_32bit_cp1_register(CP1_STATUS); + + fcsr1 = fcsr | ~mask; + write_32bit_cp1_register(CP1_STATUS, fcsr1); + fcsr1 = read_32bit_cp1_register(CP1_STATUS); + + write_32bit_cp1_register(CP1_STATUS, fcsr); + + write_c0_status(sr); + + c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask; +} + +/* + * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes + * supported by FPU hardware. + */ +static void cpu_set_fpu_2008(struct cpuinfo_mips *c) +{ + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { + unsigned long sr, fir, fcsr, fcsr0, fcsr1; + + sr = read_c0_status(); + __enable_fpu(FPU_AS_IS); + + fir = read_32bit_cp1_register(CP1_REVISION); + if (fir & MIPS_FPIR_HAS2008) { + fcsr = read_32bit_cp1_register(CP1_STATUS); + + /* + * MAC2008 toolchain never landed in real world, so + * we're only testing whether it can be disabled and + * don't try to enabled it. + */ + fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | + FPU_CSR_MAC2008); + write_32bit_cp1_register(CP1_STATUS, fcsr0); + fcsr0 = read_32bit_cp1_register(CP1_STATUS); + + fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008; + write_32bit_cp1_register(CP1_STATUS, fcsr1); + fcsr1 = read_32bit_cp1_register(CP1_STATUS); + + write_32bit_cp1_register(CP1_STATUS, fcsr); + + if (c->isa_level & (MIPS_CPU_ISA_M32R2 | + MIPS_CPU_ISA_M64R2)) { + /* + * The bit for MAC2008 might be reused by R6 + * in future, so we only test for R2-R5. + */ + if (fcsr0 & FPU_CSR_MAC2008) + c->options |= MIPS_CPU_MAC_2008_ONLY; + } + + if (!(fcsr0 & FPU_CSR_NAN2008)) + c->options |= MIPS_CPU_NAN_LEGACY; + if (fcsr1 & FPU_CSR_NAN2008) + c->options |= MIPS_CPU_NAN_2008; + + if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008) + c->fpu_msk31 &= ~FPU_CSR_ABS2008; + else + c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008; + + if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008) + c->fpu_msk31 &= ~FPU_CSR_NAN2008; + else + c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008; + } else { + c->options |= MIPS_CPU_NAN_LEGACY; + } + + write_c0_status(sr); + } else { + c->options |= MIPS_CPU_NAN_LEGACY; + } +} + +/* + * IEEE 754 conformance mode to use. Affects the NaN encoding and the + * ABS.fmt/NEG.fmt execution mode. + */ +static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT; + +/* + * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes + * to support by the FPU emulator according to the IEEE 754 conformance + * mode selected. Note that "relaxed" straps the emulator so that it + * allows 2008-NaN binaries even for legacy processors. + */ +static void cpu_set_nofpu_2008(struct cpuinfo_mips *c) +{ + c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY); + c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008); + c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008); + + switch (ieee754) { + case STRICT: + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { + c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY; + } else { + c->options |= MIPS_CPU_NAN_LEGACY; + c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008; + } + break; + case LEGACY: + c->options |= MIPS_CPU_NAN_LEGACY; + c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008; + break; + case STD2008: + c->options |= MIPS_CPU_NAN_2008; + c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008; + c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008; + break; + case RELAXED: + c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY; + break; + } +} + +/* + * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode + * according to the "ieee754=" parameter. + */ +static void cpu_set_nan_2008(struct cpuinfo_mips *c) +{ + switch (ieee754) { + case STRICT: + mips_use_nan_legacy = !!cpu_has_nan_legacy; + mips_use_nan_2008 = !!cpu_has_nan_2008; + break; + case LEGACY: + mips_use_nan_legacy = !!cpu_has_nan_legacy; + mips_use_nan_2008 = !cpu_has_nan_legacy; + break; + case STD2008: + mips_use_nan_legacy = !cpu_has_nan_2008; + mips_use_nan_2008 = !!cpu_has_nan_2008; + break; + case RELAXED: + mips_use_nan_legacy = true; + mips_use_nan_2008 = true; + break; + } +} + +/* + * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override + * settings: + * + * strict: accept binaries that request a NaN encoding supported by the FPU + * legacy: only accept legacy-NaN binaries + * 2008: only accept 2008-NaN binaries + * relaxed: accept any binaries regardless of whether supported by the FPU + */ +static int __init ieee754_setup(char *s) +{ + if (!s) + return -1; + else if (!strcmp(s, "strict")) + ieee754 = STRICT; + else if (!strcmp(s, "legacy")) + ieee754 = LEGACY; + else if (!strcmp(s, "2008")) + ieee754 = STD2008; + else if (!strcmp(s, "relaxed")) + ieee754 = RELAXED; + else + return -1; + + if (!(boot_cpu_data.options & MIPS_CPU_FPU)) + cpu_set_nofpu_2008(&boot_cpu_data); + cpu_set_nan_2008(&boot_cpu_data); + + return 0; +} + +early_param("ieee754", ieee754_setup); + +/* + * Set the FIR feature flags for the FPU emulator. + */ +static void cpu_set_nofpu_id(struct cpuinfo_mips *c) +{ + u32 value; + + value = 0; + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) + value |= MIPS_FPIR_D | MIPS_FPIR_S; + if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) + value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W; + if (c->options & MIPS_CPU_NAN_2008) + value |= MIPS_FPIR_HAS2008; + c->fpu_id = value; +} + +/* Determined FPU emulator mask to use for the boot CPU with "nofpu". */ +static unsigned int mips_nofpu_msk31; + +/* + * Set options for FPU hardware. + */ +void cpu_set_fpu_opts(struct cpuinfo_mips *c) +{ + c->fpu_id = cpu_get_fpu_id(); + mips_nofpu_msk31 = c->fpu_msk31; + + if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 | + MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 | + MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 | + MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) { + if (c->fpu_id & MIPS_FPIR_3D) + c->ases |= MIPS_ASE_MIPS3D; + if (c->fpu_id & MIPS_FPIR_UFRP) + c->options |= MIPS_CPU_UFR; + if (c->fpu_id & MIPS_FPIR_FREP) + c->options |= MIPS_CPU_FRE; + } + + cpu_set_fpu_fcsr_mask(c); + cpu_set_fpu_2008(c); + cpu_set_nan_2008(c); +} + +/* + * Set options for the FPU emulator. + */ +void cpu_set_nofpu_opts(struct cpuinfo_mips *c) +{ + c->options &= ~MIPS_CPU_FPU; + c->fpu_msk31 = mips_nofpu_msk31; + + cpu_set_nofpu_2008(c); + cpu_set_nan_2008(c); + cpu_set_nofpu_id(c); +} + +int mips_fpu_disabled; + +static int __init fpu_disable(char *s) +{ + cpu_set_nofpu_opts(&boot_cpu_data); + mips_fpu_disabled = 1; + + return 1; +} + +__setup("nofpu", fpu_disable); + diff --git a/arch/mips/kernel/fpu-probe.h b/arch/mips/kernel/fpu-probe.h new file mode 100644 index 000000000..951ce5089 --- /dev/null +++ b/arch/mips/kernel/fpu-probe.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <linux/kernel.h> + +#include <asm/cpu.h> +#include <asm/cpu-info.h> + +#ifdef CONFIG_MIPS_FP_SUPPORT + +extern int mips_fpu_disabled; + +int __cpu_has_fpu(void); +void cpu_set_fpu_opts(struct cpuinfo_mips *c); +void cpu_set_nofpu_opts(struct cpuinfo_mips *c); + +#else /* !CONFIG_MIPS_FP_SUPPORT */ + +#define mips_fpu_disabled 1 + +static inline unsigned long cpu_get_fpu_id(void) +{ + return FPIR_IMP_NONE; +} + +static inline int __cpu_has_fpu(void) +{ + return 0; +} + +static inline void cpu_set_fpu_opts(struct cpuinfo_mips *c) +{ + /* no-op */ +} + +static inline void cpu_set_nofpu_opts(struct cpuinfo_mips *c) +{ + /* no-op */ +} + +#endif /* CONFIG_MIPS_FP_SUPPORT */ diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c new file mode 100644 index 000000000..f57e68f40 --- /dev/null +++ b/arch/mips/kernel/ftrace.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com> + * Copyright (C) 2009, 2010 DSLab, Lanzhou University, China + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + * + * Thanks goes to Steven Rostedt for writing the original x86 version. + */ + +#include <linux/uaccess.h> +#include <linux/init.h> +#include <linux/ftrace.h> +#include <linux/syscalls.h> + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/cacheflush.h> +#include <asm/syscall.h> +#include <asm/uasm.h> +#include <asm/unistd.h> + +#include <asm-generic/sections.h> + +#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT) +#define MCOUNT_OFFSET_INSNS 5 +#else +#define MCOUNT_OFFSET_INSNS 4 +#endif + +#ifdef CONFIG_DYNAMIC_FTRACE + +/* Arch override because MIPS doesn't need to run this from stop_machine() */ +void arch_ftrace_update_code(int command) +{ + ftrace_modify_all_code(command); +} + +#define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ +#define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define JUMP_RANGE_MASK ((1UL << 28) - 1) + +#define INSN_NOP 0x00000000 /* nop */ +#define INSN_JAL(addr) \ + ((unsigned int)(JAL | (((addr) >> 2) & ADDR_MASK))) + +static unsigned int insn_jal_ftrace_caller __read_mostly; +static unsigned int insn_la_mcount[2] __read_mostly; +static unsigned int insn_j_ftrace_graph_caller __maybe_unused __read_mostly; + +static inline void ftrace_dyn_arch_init_insns(void) +{ + u32 *buf; + unsigned int v1; + + /* la v1, _mcount */ + v1 = 3; + buf = (u32 *)&insn_la_mcount[0]; + UASM_i_LA(&buf, v1, MCOUNT_ADDR); + + /* jal (ftrace_caller + 8), jump over the first two instruction */ + buf = (u32 *)&insn_jal_ftrace_caller; + uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK); + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + /* j ftrace_graph_caller */ + buf = (u32 *)&insn_j_ftrace_graph_caller; + uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK); +#endif +} + +static int ftrace_modify_code(unsigned long ip, unsigned int new_code) +{ + int faulted; + mm_segment_t old_fs; + + /* *(unsigned int *)ip = new_code; */ + safe_store_code(new_code, ip, faulted); + + if (unlikely(faulted)) + return -EFAULT; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + flush_icache_range(ip, ip + 8); + set_fs(old_fs); + + return 0; +} + +#ifndef CONFIG_64BIT +static int ftrace_modify_code_2(unsigned long ip, unsigned int new_code1, + unsigned int new_code2) +{ + int faulted; + mm_segment_t old_fs; + + safe_store_code(new_code1, ip, faulted); + if (unlikely(faulted)) + return -EFAULT; + + ip += 4; + safe_store_code(new_code2, ip, faulted); + if (unlikely(faulted)) + return -EFAULT; + + ip -= 4; + old_fs = get_fs(); + set_fs(KERNEL_DS); + flush_icache_range(ip, ip + 8); + set_fs(old_fs); + + return 0; +} + +static int ftrace_modify_code_2r(unsigned long ip, unsigned int new_code1, + unsigned int new_code2) +{ + int faulted; + mm_segment_t old_fs; + + ip += 4; + safe_store_code(new_code2, ip, faulted); + if (unlikely(faulted)) + return -EFAULT; + + ip -= 4; + safe_store_code(new_code1, ip, faulted); + if (unlikely(faulted)) + return -EFAULT; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + flush_icache_range(ip, ip + 8); + set_fs(old_fs); + + return 0; +} +#endif + +/* + * The details about the calling site of mcount on MIPS + * + * 1. For kernel: + * + * move at, ra + * jal _mcount --> nop + * sub sp, sp, 8 --> nop (CONFIG_32BIT) + * + * 2. For modules: + * + * 2.1 For KBUILD_MCOUNT_RA_ADDRESS and CONFIG_32BIT + * + * lui v1, hi_16bit_of_mcount --> b 1f (0x10000005) + * addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT) + * move at, ra + * move $12, ra_address + * jalr v1 + * sub sp, sp, 8 + * 1: offset = 5 instructions + * 2.2 For the Other situations + * + * lui v1, hi_16bit_of_mcount --> b 1f (0x10000004) + * addiu v1, v1, low_16bit_of_mcount --> nop (CONFIG_32BIT) + * move at, ra + * jalr v1 + * nop | move $12, ra_address | sub sp, sp, 8 + * 1: offset = 4 instructions + */ + +#define INSN_B_1F (0x10000000 | MCOUNT_OFFSET_INSNS) + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + unsigned long ip = rec->ip; + + /* + * If ip is in kernel space, no long call, otherwise, long call is + * needed. + */ + new = core_kernel_text(ip) ? INSN_NOP : INSN_B_1F; +#ifdef CONFIG_64BIT + return ftrace_modify_code(ip, new); +#else + /* + * On 32 bit MIPS platforms, gcc adds a stack adjust + * instruction in the delay slot after the branch to + * mcount and expects mcount to restore the sp on return. + * This is based on a legacy API and does nothing but + * waste instructions so it's being removed at runtime. + */ + return ftrace_modify_code_2(ip, new, INSN_NOP); +#endif +} + +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned int new; + unsigned long ip = rec->ip; + + new = core_kernel_text(ip) ? insn_jal_ftrace_caller : insn_la_mcount[0]; + +#ifdef CONFIG_64BIT + return ftrace_modify_code(ip, new); +#else + return ftrace_modify_code_2r(ip, new, core_kernel_text(ip) ? + INSN_NOP : insn_la_mcount[1]); +#endif +} + +#define FTRACE_CALL_IP ((unsigned long)(&ftrace_call)) + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned int new; + + new = INSN_JAL((unsigned long)func); + + return ftrace_modify_code(FTRACE_CALL_IP, new); +} + +int __init ftrace_dyn_arch_init(void) +{ + /* Encode the instructions when booting */ + ftrace_dyn_arch_init_insns(); + + /* Remove "b ftrace_stub" to ensure ftrace_caller() is executed */ + ftrace_modify_code(MCOUNT_ADDR, INSN_NOP); + + return 0; +} +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +#ifdef CONFIG_DYNAMIC_FTRACE + +extern void ftrace_graph_call(void); +#define FTRACE_GRAPH_CALL_IP ((unsigned long)(&ftrace_graph_call)) + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, + insn_j_ftrace_graph_caller); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_code(FTRACE_GRAPH_CALL_IP, INSN_NOP); +} + +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifndef KBUILD_MCOUNT_RA_ADDRESS + +#define S_RA_SP (0xafbf << 16) /* s{d,w} ra, offset(sp) */ +#define S_R_SP (0xafb0 << 16) /* s{d,w} R, offset(sp) */ +#define OFFSET_MASK 0xffff /* stack offset range: 0 ~ PT_SIZE */ + +unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long + old_parent_ra, unsigned long parent_ra_addr, unsigned long fp) +{ + unsigned long sp, ip, tmp; + unsigned int code; + int faulted; + + /* + * For module, move the ip from the return address after the + * instruction "lui v1, hi_16bit_of_mcount"(offset is 24), but for + * kernel, move after the instruction "move ra, at"(offset is 16) + */ + ip = self_ra - (core_kernel_text(self_ra) ? 16 : 24); + + /* + * search the text until finding the non-store instruction or "s{d,w} + * ra, offset(sp)" instruction + */ + do { + /* get the code at "ip": code = *(unsigned int *)ip; */ + safe_load_code(code, ip, faulted); + + if (unlikely(faulted)) + return 0; + /* + * If we hit the non-store instruction before finding where the + * ra is stored, then this is a leaf function and it does not + * store the ra on the stack + */ + if ((code & S_R_SP) != S_R_SP) + return parent_ra_addr; + + /* Move to the next instruction */ + ip -= 4; + } while ((code & S_RA_SP) != S_RA_SP); + + sp = fp + (code & OFFSET_MASK); + + /* tmp = *(unsigned long *)sp; */ + safe_load_stack(tmp, sp, faulted); + if (unlikely(faulted)) + return 0; + + if (tmp == old_parent_ra) + return sp; + return 0; +} + +#endif /* !KBUILD_MCOUNT_RA_ADDRESS */ + +/* + * Hook the return address and push it in the stack of return addrs + * in current thread info. + */ +void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra, + unsigned long fp) +{ + unsigned long old_parent_ra; + unsigned long return_hooker = (unsigned long) + &return_to_handler; + int faulted, insns; + + if (unlikely(ftrace_graph_is_dead())) + return; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* + * "parent_ra_addr" is the stack address where the return address of + * the caller of _mcount is saved. + * + * If gcc < 4.5, a leaf function does not save the return address + * in the stack address, so we "emulate" one in _mcount's stack space, + * and hijack it directly. + * For a non-leaf function, it does save the return address to its own + * stack space, so we can not hijack it directly, but need to find the + * real stack address, which is done by ftrace_get_parent_addr(). + * + * If gcc >= 4.5, with the new -mmcount-ra-address option, for a + * non-leaf function, the location of the return address will be saved + * to $12 for us. + * For a leaf function, it just puts a zero into $12, so we handle + * it in ftrace_graph_caller() of mcount.S. + */ + + /* old_parent_ra = *parent_ra_addr; */ + safe_load_stack(old_parent_ra, parent_ra_addr, faulted); + if (unlikely(faulted)) + goto out; +#ifndef KBUILD_MCOUNT_RA_ADDRESS + parent_ra_addr = (unsigned long *)ftrace_get_parent_ra_addr(self_ra, + old_parent_ra, (unsigned long)parent_ra_addr, fp); + /* + * If fails when getting the stack address of the non-leaf function's + * ra, stop function graph tracer and return + */ + if (parent_ra_addr == NULL) + goto out; +#endif + /* *parent_ra_addr = return_hooker; */ + safe_store_stack(return_hooker, parent_ra_addr, faulted); + if (unlikely(faulted)) + goto out; + + /* + * Get the recorded ip of the current mcount calling site in the + * __mcount_loc section, which will be used to filter the function + * entries configured through the tracing/set_graph_function interface. + */ + + insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1; + self_ra -= (MCOUNT_INSN_SIZE * insns); + + if (function_graph_enter(old_parent_ra, self_ra, fp, NULL)) + *parent_ra_addr = old_parent_ra; + return; +out: + ftrace_graph_stop(); + WARN_ON(1); +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#ifdef CONFIG_FTRACE_SYSCALLS + +#ifdef CONFIG_32BIT +unsigned long __init arch_syscall_addr(int nr) +{ + return (unsigned long)sys_call_table[nr - __NR_O32_Linux]; +} +#endif + +#ifdef CONFIG_64BIT + +unsigned long __init arch_syscall_addr(int nr) +{ +#ifdef CONFIG_MIPS32_N32 + if (nr >= __NR_N32_Linux && nr < __NR_N32_Linux + __NR_N32_Linux_syscalls) + return (unsigned long)sysn32_call_table[nr - __NR_N32_Linux]; +#endif + if (nr >= __NR_64_Linux && nr < __NR_64_Linux + __NR_64_Linux_syscalls) + return (unsigned long)sys_call_table[nr - __NR_64_Linux]; +#ifdef CONFIG_MIPS32_O32 + if (nr >= __NR_O32_Linux && nr < __NR_O32_Linux + __NR_O32_Linux_syscalls) + return (unsigned long)sys32_call_table[nr - __NR_O32_Linux]; +#endif + + return (unsigned long) &sys_ni_syscall; +} +#endif + +#endif /* CONFIG_FTRACE_SYSCALLS */ diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S new file mode 100644 index 000000000..bcce32a3d --- /dev/null +++ b/arch/mips/kernel/genex.S @@ -0,0 +1,682 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2002, 2007 Maciej W. Rozycki + * Copyright (C) 2001, 2012 MIPS Technologies, Inc. All rights reserved. + */ +#include <linux/init.h> + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/cacheops.h> +#include <asm/irqflags.h> +#include <asm/regdef.h> +#include <asm/fpregdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/sync.h> +#include <asm/war.h> +#include <asm/thread_info.h> + + __INIT + +/* + * General exception vector for all other CPUs. + * + * Be careful when changing this, it has to be at most 128 bytes + * to fit into space reserved for the exception handler. + */ +NESTED(except_vec3_generic, 0, sp) + .set push + .set noat + mfc0 k1, CP0_CAUSE + andi k1, k1, 0x7c +#ifdef CONFIG_64BIT + dsll k1, k1, 1 +#endif + PTR_L k0, exception_handlers(k1) + jr k0 + .set pop + END(except_vec3_generic) + +/* + * General exception handler for CPUs with virtual coherency exception. + * + * Be careful when changing this, it has to be at most 256 (as a special + * exception) bytes to fit into space reserved for the exception handler. + */ +NESTED(except_vec3_r4000, 0, sp) + .set push + .set arch=r4000 + .set noat + mfc0 k1, CP0_CAUSE + li k0, 31<<2 + andi k1, k1, 0x7c + .set push + .set noreorder + .set nomacro + beq k1, k0, handle_vced + li k0, 14<<2 + beq k1, k0, handle_vcei +#ifdef CONFIG_64BIT + dsll k1, k1, 1 +#endif + .set pop + PTR_L k0, exception_handlers(k1) + jr k0 + + /* + * Big shit, we now may have two dirty primary cache lines for the same + * physical address. We can safely invalidate the line pointed to by + * c0_badvaddr because after return from this exception handler the + * load / store will be re-executed. + */ +handle_vced: + MFC0 k0, CP0_BADVADDR + li k1, -4 # Is this ... + and k0, k1 # ... really needed? + mtc0 zero, CP0_TAGLO + cache Index_Store_Tag_D, (k0) + cache Hit_Writeback_Inv_SD, (k0) +#ifdef CONFIG_PROC_FS + PTR_LA k0, vced_count + lw k1, (k0) + addiu k1, 1 + sw k1, (k0) +#endif + eret + +handle_vcei: + MFC0 k0, CP0_BADVADDR + cache Hit_Writeback_Inv_SD, (k0) # also cleans pi +#ifdef CONFIG_PROC_FS + PTR_LA k0, vcei_count + lw k1, (k0) + addiu k1, 1 + sw k1, (k0) +#endif + eret + .set pop + END(except_vec3_r4000) + + __FINIT + + .align 5 /* 32 byte rollback region */ +LEAF(__r4k_wait) + .set push + .set noreorder + /* start of rollback region */ + LONG_L t0, TI_FLAGS($28) + nop + andi t0, _TIF_NEED_RESCHED + bnez t0, 1f + nop + nop + nop +#ifdef CONFIG_CPU_MICROMIPS + nop + nop + nop + nop +#endif + .set MIPS_ISA_ARCH_LEVEL_RAW + wait + /* end of rollback region (the region size must be power of two) */ +1: + jr ra + nop + .set pop + END(__r4k_wait) + + .macro BUILD_ROLLBACK_PROLOGUE handler + FEXPORT(rollback_\handler) + .set push + .set noat + MFC0 k0, CP0_EPC + PTR_LA k1, __r4k_wait + ori k0, 0x1f /* 32 byte rollback region */ + xori k0, 0x1f + bne k0, k1, \handler + MTC0 k0, CP0_EPC + .set pop + .endm + + .align 5 +BUILD_ROLLBACK_PROLOGUE handle_int +NESTED(handle_int, PT_SIZE, sp) + .cfi_signal_frame +#ifdef CONFIG_TRACE_IRQFLAGS + /* + * Check to see if the interrupted code has just disabled + * interrupts and ignore this interrupt for now if so. + * + * local_irq_disable() disables interrupts and then calls + * trace_hardirqs_off() to track the state. If an interrupt is taken + * after interrupts are disabled but before the state is updated + * it will appear to restore_all that it is incorrectly returning with + * interrupts disabled + */ + .set push + .set noat + mfc0 k0, CP0_STATUS +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + and k0, ST0_IEP + bnez k0, 1f + + mfc0 k0, CP0_EPC + .set noreorder + j k0 + rfe +#else + and k0, ST0_IE + bnez k0, 1f + + eret +#endif +1: + .set pop +#endif + SAVE_ALL docfi=1 + CLI + TRACE_IRQS_OFF + + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + + /* + * SAVE_ALL ensures we are using a valid kernel stack for the thread. + * Check if we are already using the IRQ stack. + */ + move s1, sp # Preserve the sp + + /* Get IRQ stack for this CPU */ + ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG +#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) + lui k1, %hi(irq_stack) +#else + lui k1, %highest(irq_stack) + daddiu k1, %higher(irq_stack) + dsll k1, 16 + daddiu k1, %hi(irq_stack) + dsll k1, 16 +#endif + LONG_SRL k0, SMP_CPUID_PTRSHIFT + LONG_ADDU k1, k0 + LONG_L t0, %lo(irq_stack)(k1) + + # Check if already on IRQ stack + PTR_LI t1, ~(_THREAD_SIZE-1) + and t1, t1, sp + beq t0, t1, 2f + + /* Switch to IRQ stack */ + li t1, _IRQ_STACK_START + PTR_ADD sp, t0, t1 + + /* Save task's sp on IRQ stack so that unwinding can follow it */ + LONG_S s1, 0(sp) +2: + jal plat_irq_dispatch + + /* Restore sp */ + move sp, s1 + + j ret_from_irq +#ifdef CONFIG_CPU_MICROMIPS + nop +#endif + END(handle_int) + + __INIT + +/* + * Special interrupt vector for MIPS64 ISA & embedded MIPS processors. + * This is a dedicated interrupt exception vector which reduces the + * interrupt processing overhead. The jump instruction will be replaced + * at the initialization time. + * + * Be careful when changing this, it has to be at most 128 bytes + * to fit into space reserved for the exception handler. + */ +NESTED(except_vec4, 0, sp) +1: j 1b /* Dummy, will be replaced */ + END(except_vec4) + +/* + * EJTAG debug exception handler. + * The EJTAG debug exception entry point is 0xbfc00480, which + * normally is in the boot PROM, so the boot PROM must do an + * unconditional jump to this vector. + */ +NESTED(except_vec_ejtag_debug, 0, sp) + j ejtag_debug_handler +#ifdef CONFIG_CPU_MICROMIPS + nop +#endif + END(except_vec_ejtag_debug) + + __FINIT + +/* + * Vectored interrupt handler. + * This prototype is copied to ebase + n*IntCtl.VS and patched + * to invoke the handler + */ +BUILD_ROLLBACK_PROLOGUE except_vec_vi +NESTED(except_vec_vi, 0, sp) + SAVE_SOME docfi=1 + SAVE_AT docfi=1 + .set push + .set noreorder + PTR_LA v1, except_vec_vi_handler +FEXPORT(except_vec_vi_lui) + lui v0, 0 /* Patched */ + jr v1 +FEXPORT(except_vec_vi_ori) + ori v0, 0 /* Patched */ + .set pop + END(except_vec_vi) +EXPORT(except_vec_vi_end) + +/* + * Common Vectored Interrupt code + * Complete the register saves and invoke the handler which is passed in $v0 + */ +NESTED(except_vec_vi_handler, 0, sp) + SAVE_TEMP + SAVE_STATIC + CLI +#ifdef CONFIG_TRACE_IRQFLAGS + move s0, v0 + TRACE_IRQS_OFF + move v0, s0 +#endif + + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + + /* + * SAVE_ALL ensures we are using a valid kernel stack for the thread. + * Check if we are already using the IRQ stack. + */ + move s1, sp # Preserve the sp + + /* Get IRQ stack for this CPU */ + ASM_CPUID_MFC0 k0, ASM_SMP_CPUID_REG +#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32) + lui k1, %hi(irq_stack) +#else + lui k1, %highest(irq_stack) + daddiu k1, %higher(irq_stack) + dsll k1, 16 + daddiu k1, %hi(irq_stack) + dsll k1, 16 +#endif + LONG_SRL k0, SMP_CPUID_PTRSHIFT + LONG_ADDU k1, k0 + LONG_L t0, %lo(irq_stack)(k1) + + # Check if already on IRQ stack + PTR_LI t1, ~(_THREAD_SIZE-1) + and t1, t1, sp + beq t0, t1, 2f + + /* Switch to IRQ stack */ + li t1, _IRQ_STACK_START + PTR_ADD sp, t0, t1 + + /* Save task's sp on IRQ stack so that unwinding can follow it */ + LONG_S s1, 0(sp) +2: + jalr v0 + + /* Restore sp */ + move sp, s1 + + j ret_from_irq + END(except_vec_vi_handler) + +/* + * EJTAG debug exception handler. + */ +NESTED(ejtag_debug_handler, PT_SIZE, sp) + .set push + .set noat + MTC0 k0, CP0_DESAVE + mfc0 k0, CP0_DEBUG + + sll k0, k0, 30 # Check for SDBBP. + bgez k0, ejtag_return + +#ifdef CONFIG_SMP +1: PTR_LA k0, ejtag_debug_buffer_spinlock + __SYNC(full, loongson3_war) +2: ll k0, 0(k0) + bnez k0, 2b + PTR_LA k0, ejtag_debug_buffer_spinlock + sc k0, 0(k0) + beqz k0, 1b +# ifdef CONFIG_WEAK_REORDERING_BEYOND_LLSC + sync +# endif + + PTR_LA k0, ejtag_debug_buffer + LONG_S k1, 0(k0) + + ASM_CPUID_MFC0 k1, ASM_SMP_CPUID_REG + PTR_SRL k1, SMP_CPUID_PTRSHIFT + PTR_SLL k1, LONGLOG + PTR_LA k0, ejtag_debug_buffer_per_cpu + PTR_ADDU k0, k1 + + PTR_LA k1, ejtag_debug_buffer + LONG_L k1, 0(k1) + LONG_S k1, 0(k0) + + PTR_LA k0, ejtag_debug_buffer_spinlock + sw zero, 0(k0) +#else + PTR_LA k0, ejtag_debug_buffer + LONG_S k1, 0(k0) +#endif + + SAVE_ALL + move a0, sp + jal ejtag_exception_handler + RESTORE_ALL + +#ifdef CONFIG_SMP + ASM_CPUID_MFC0 k1, ASM_SMP_CPUID_REG + PTR_SRL k1, SMP_CPUID_PTRSHIFT + PTR_SLL k1, LONGLOG + PTR_LA k0, ejtag_debug_buffer_per_cpu + PTR_ADDU k0, k1 + LONG_L k1, 0(k0) +#else + PTR_LA k0, ejtag_debug_buffer + LONG_L k1, 0(k0) +#endif + +ejtag_return: + back_to_back_c0_hazard + MFC0 k0, CP0_DESAVE + .set mips32 + deret + .set pop + END(ejtag_debug_handler) + +/* + * This buffer is reserved for the use of the EJTAG debug + * handler. + */ + .data +EXPORT(ejtag_debug_buffer) + .fill LONGSIZE +#ifdef CONFIG_SMP +EXPORT(ejtag_debug_buffer_spinlock) + .fill LONGSIZE +EXPORT(ejtag_debug_buffer_per_cpu) + .fill LONGSIZE * NR_CPUS +#endif + .previous + + __INIT + +/* + * NMI debug exception handler for MIPS reference boards. + * The NMI debug exception entry point is 0xbfc00000, which + * normally is in the boot PROM, so the boot PROM must do a + * unconditional jump to this vector. + */ +NESTED(except_vec_nmi, 0, sp) + j nmi_handler +#ifdef CONFIG_CPU_MICROMIPS + nop +#endif + END(except_vec_nmi) + + __FINIT + +NESTED(nmi_handler, PT_SIZE, sp) + .cfi_signal_frame + .set push + .set noat + /* + * Clear ERL - restore segment mapping + * Clear BEV - required for page fault exception handler to work + */ + mfc0 k0, CP0_STATUS + ori k0, k0, ST0_EXL + li k1, ~(ST0_BEV | ST0_ERL) + and k0, k0, k1 + mtc0 k0, CP0_STATUS + _ehb + SAVE_ALL + move a0, sp + jal nmi_exception_handler + /* nmi_exception_handler never returns */ + .set pop + END(nmi_handler) + + .macro __build_clear_none + .endm + + .macro __build_clear_sti + TRACE_IRQS_ON + STI + .endm + + .macro __build_clear_cli + CLI + TRACE_IRQS_OFF + .endm + + .macro __build_clear_fpe + CLI + TRACE_IRQS_OFF + .set push + /* gas fails to assemble cfc1 for some archs (octeon).*/ \ + .set mips1 + SET_HARDFLOAT + cfc1 a1, fcr31 + .set pop + .endm + + .macro __build_clear_msa_fpe + CLI + TRACE_IRQS_OFF + _cfcmsa a1, MSA_CSR + .endm + + .macro __build_clear_ade + MFC0 t0, CP0_BADVADDR + PTR_S t0, PT_BVADDR(sp) + KMODE + .endm + + .macro __build_clear_gsexc + .set push + /* + * We need to specify a selector to access the CP0.Diag1 (GSCause) + * register. All GSExc-equipped processors have MIPS32. + */ + .set mips32 + mfc0 a1, CP0_DIAGNOSTIC1 + .set pop + TRACE_IRQS_ON + STI + .endm + + .macro __BUILD_silent exception + .endm + + /* Gas tries to parse the ASM_PRINT argument as a string containing + string escapes and emits bogus warnings if it believes to + recognize an unknown escape code. So make the arguments + start with an n and gas will believe \n is ok ... */ + .macro __BUILD_verbose nexception + LONG_L a1, PT_EPC(sp) +#ifdef CONFIG_32BIT + ASM_PRINT("Got \nexception at %08lx\012") +#endif +#ifdef CONFIG_64BIT + ASM_PRINT("Got \nexception at %016lx\012") +#endif + .endm + + .macro __BUILD_count exception + LONG_L t0,exception_count_\exception + LONG_ADDIU t0, 1 + LONG_S t0,exception_count_\exception + .comm exception_count\exception, 8, 8 + .endm + + .macro __BUILD_HANDLER exception handler clear verbose ext + .align 5 + NESTED(handle_\exception, PT_SIZE, sp) + .cfi_signal_frame + .set noat + SAVE_ALL + FEXPORT(handle_\exception\ext) + __build_clear_\clear + .set at + __BUILD_\verbose \exception + move a0, sp + jal do_\handler + j ret_from_exception + END(handle_\exception) + .endm + + .macro BUILD_HANDLER exception handler clear verbose + __BUILD_HANDLER \exception \handler \clear \verbose _int + .endm + + BUILD_HANDLER adel ade ade silent /* #4 */ + BUILD_HANDLER ades ade ade silent /* #5 */ + BUILD_HANDLER ibe be cli silent /* #6 */ + BUILD_HANDLER dbe be cli silent /* #7 */ + BUILD_HANDLER bp bp sti silent /* #9 */ + BUILD_HANDLER ri ri sti silent /* #10 */ + BUILD_HANDLER cpu cpu sti silent /* #11 */ + BUILD_HANDLER ov ov sti silent /* #12 */ + BUILD_HANDLER tr tr sti silent /* #13 */ + BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent /* #14 */ +#ifdef CONFIG_MIPS_FP_SUPPORT + BUILD_HANDLER fpe fpe fpe silent /* #15 */ +#endif + BUILD_HANDLER ftlb ftlb none silent /* #16 */ + BUILD_HANDLER gsexc gsexc gsexc silent /* #16 */ + BUILD_HANDLER msa msa sti silent /* #21 */ + BUILD_HANDLER mdmx mdmx sti silent /* #22 */ +#ifdef CONFIG_HARDWARE_WATCHPOINTS + /* + * For watch, interrupts will be enabled after the watch + * registers are read. + */ + BUILD_HANDLER watch watch cli silent /* #23 */ +#else + BUILD_HANDLER watch watch sti verbose /* #23 */ +#endif + BUILD_HANDLER mcheck mcheck cli verbose /* #24 */ + BUILD_HANDLER mt mt sti silent /* #25 */ + BUILD_HANDLER dsp dsp sti silent /* #26 */ + BUILD_HANDLER reserved reserved sti verbose /* others */ + + .align 5 + LEAF(handle_ri_rdhwr_tlbp) + .set push + .set noat + .set noreorder + /* check if TLB contains a entry for EPC */ + MFC0 k1, CP0_ENTRYHI + andi k1, MIPS_ENTRYHI_ASID | MIPS_ENTRYHI_ASIDX + MFC0 k0, CP0_EPC + PTR_SRL k0, _PAGE_SHIFT + 1 + PTR_SLL k0, _PAGE_SHIFT + 1 + or k1, k0 + MTC0 k1, CP0_ENTRYHI + mtc0_tlbw_hazard + tlbp + tlb_probe_hazard + mfc0 k1, CP0_INDEX + .set pop + bltz k1, handle_ri /* slow path */ + /* fall thru */ + END(handle_ri_rdhwr_tlbp) + + LEAF(handle_ri_rdhwr) + .set push + .set noat + .set noreorder + /* MIPS32: 0x7c03e83b: rdhwr v1,$29 */ + /* microMIPS: 0x007d6b3c: rdhwr v1,$29 */ + MFC0 k1, CP0_EPC +#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2) + and k0, k1, 1 + beqz k0, 1f + xor k1, k0 + lhu k0, (k1) + lhu k1, 2(k1) + ins k1, k0, 16, 16 + lui k0, 0x007d + b docheck + ori k0, 0x6b3c +1: + lui k0, 0x7c03 + lw k1, (k1) + ori k0, 0xe83b +#else + andi k0, k1, 1 + bnez k0, handle_ri + lui k0, 0x7c03 + lw k1, (k1) + ori k0, 0xe83b +#endif + .set reorder +docheck: + bne k0, k1, handle_ri /* if not ours */ + +isrdhwr: + /* The insn is rdhwr. No need to check CAUSE.BD here. */ + get_saved_sp /* k1 := current_thread_info */ + .set noreorder + MFC0 k0, CP0_EPC +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + ori k1, _THREAD_MASK + xori k1, _THREAD_MASK + LONG_L v1, TI_TP_VALUE(k1) + LONG_ADDIU k0, 4 + jr k0 + rfe +#else +#ifndef CONFIG_CPU_DADDI_WORKAROUNDS + LONG_ADDIU k0, 4 /* stall on $k0 */ +#else + .set at=v1 + LONG_ADDIU k0, 4 + .set noat +#endif + MTC0 k0, CP0_EPC + /* I hope three instructions between MTC0 and ERET are enough... */ + ori k1, _THREAD_MASK + xori k1, _THREAD_MASK + LONG_L v1, TI_TP_VALUE(k1) + .set push + .set arch=r4000 + eret + .set pop +#endif + .set pop + END(handle_ri_rdhwr) + +#ifdef CONFIG_CPU_R4X00_BUGS64 +/* A temporary overflow handler used by check_daddi(). */ + + __INIT + + BUILD_HANDLER daddi_ov daddi_ov none silent /* #12 */ +#endif diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c new file mode 100644 index 000000000..8c083612d --- /dev/null +++ b/arch/mips/kernel/gpio_txx9.c @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * A gpio chip driver for TXx9 SoCs + * + * Copyright (C) 2008 Atsushi Nemoto <anemo@mba.ocn.ne.jp> + */ + +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/gpio/driver.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <asm/txx9pio.h> + +static DEFINE_SPINLOCK(txx9_gpio_lock); + +static struct txx9_pio_reg __iomem *txx9_pioptr; + +static int txx9_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + return !!(__raw_readl(&txx9_pioptr->din) & (1 << offset)); +} + +static void txx9_gpio_set_raw(unsigned int offset, int value) +{ + u32 val; + val = __raw_readl(&txx9_pioptr->dout); + if (value) + val |= 1 << offset; + else + val &= ~(1 << offset); + __raw_writel(val, &txx9_pioptr->dout); +} + +static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); + txx9_gpio_set_raw(offset, value); + mmiowb(); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); +} + +static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset) +{ + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); + __raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset), + &txx9_pioptr->dir); + mmiowb(); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); + return 0; +} + +static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset, + int value) +{ + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); + txx9_gpio_set_raw(offset, value); + __raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset), + &txx9_pioptr->dir); + mmiowb(); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); + return 0; +} + +static struct gpio_chip txx9_gpio_chip = { + .get = txx9_gpio_get, + .set = txx9_gpio_set, + .direction_input = txx9_gpio_dir_in, + .direction_output = txx9_gpio_dir_out, + .label = "TXx9", +}; + +int __init txx9_gpio_init(unsigned long baseaddr, + unsigned int base, unsigned int num) +{ + txx9_pioptr = ioremap(baseaddr, sizeof(struct txx9_pio_reg)); + if (!txx9_pioptr) + return -ENODEV; + txx9_gpio_chip.base = base; + txx9_gpio_chip.ngpio = num; + return gpiochip_add_data(&txx9_gpio_chip, NULL); +} diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S new file mode 100644 index 000000000..61b73580b --- /dev/null +++ b/arch/mips/kernel/head.S @@ -0,0 +1,185 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995 Waldorf Electronics + * Written by Ralf Baechle and Andreas Busse + * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle + * Copyright (C) 1996 Paul M. Antoine + * Modified for DECStation and hence R3000 support by Paul M. Antoine + * Further modifications by David S. Miller and Harald Koerfgen + * Copyright (C) 1999 Silicon Graphics, Inc. + * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + */ +#include <linux/init.h> +#include <linux/threads.h> + +#include <asm/addrspace.h> +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/irqflags.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> + +#include <kernel-entry-init.h> + + /* + * For the moment disable interrupts, mark the kernel mode and + * set ST0_KX so that the CPU does not spit fire when using + * 64-bit addresses. A full initialization of the CPU's status + * register is done later in per_cpu_trap_init(). + */ + .macro setup_c0_status set clr + .set push + mfc0 t0, CP0_STATUS + or t0, ST0_KERNEL_CUMASK|\set|0x1f|\clr + xor t0, 0x1f|\clr + mtc0 t0, CP0_STATUS + .set noreorder + sll zero,3 # ehb + .set pop + .endm + + .macro setup_c0_status_pri +#ifdef CONFIG_64BIT + setup_c0_status ST0_KX 0 +#else + setup_c0_status 0 0 +#endif + .endm + + .macro setup_c0_status_sec +#ifdef CONFIG_64BIT + setup_c0_status ST0_KX ST0_BEV +#else + setup_c0_status 0 ST0_BEV +#endif + .endm + +#ifndef CONFIG_NO_EXCEPT_FILL + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. + */ + .fill 0x400 +#endif + +EXPORT(_stext) + +#ifdef CONFIG_BOOT_RAW + /* + * Give us a fighting chance of running if execution beings at the + * kernel load address. This is needed because this platform does + * not have a ELF loader yet. + */ +FEXPORT(__kernel_entry) + j kernel_entry +#endif /* CONFIG_BOOT_RAW */ + + __REF + +NESTED(kernel_entry, 16, sp) # kernel entry point + + kernel_entry_setup # cpu specific setup + + setup_c0_status_pri + + /* We might not get launched at the address the kernel is linked to, + so we jump there. */ + PTR_LA t0, 0f + jr t0 +0: + +#ifdef CONFIG_USE_OF +#if defined(CONFIG_MIPS_RAW_APPENDED_DTB) || \ + defined(CONFIG_MIPS_ELF_APPENDED_DTB) + + PTR_LA t2, __appended_dtb + +#ifdef CONFIG_CPU_BIG_ENDIAN + li t1, 0xd00dfeed +#else /* !CONFIG_CPU_BIG_ENDIAN */ + li t1, 0xedfe0dd0 +#endif /* !CONFIG_CPU_BIG_ENDIAN */ + lw t0, (t2) + beq t0, t1, dtb_found +#endif /* CONFIG_MIPS_RAW_APPENDED_DTB || CONFIG_MIPS_ELF_APPENDED_DTB */ + li t1, -2 + move t2, a1 + beq a0, t1, dtb_found + +#ifdef CONFIG_BUILTIN_DTB + PTR_LA t2, __dtb_start + PTR_LA t1, __dtb_end + bne t1, t2, dtb_found +#endif /* CONFIG_BUILTIN_DTB */ + + li t2, 0 +dtb_found: +#endif /* CONFIG_USE_OF */ + PTR_LA t0, __bss_start # clear .bss + LONG_S zero, (t0) + PTR_LA t1, __bss_stop - LONGSIZE +1: + PTR_ADDIU t0, LONGSIZE + LONG_S zero, (t0) + bne t0, t1, 1b + + LONG_S a0, fw_arg0 # firmware arguments + LONG_S a1, fw_arg1 + LONG_S a2, fw_arg2 + LONG_S a3, fw_arg3 + +#ifdef CONFIG_USE_OF + LONG_S t2, fw_passed_dtb +#endif + + MTC0 zero, CP0_CONTEXT # clear context register +#ifdef CONFIG_64BIT + MTC0 zero, CP0_XCONTEXT +#endif + PTR_LA $28, init_thread_union + /* Set the SP after an empty pt_regs. */ + PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE + PTR_ADDU sp, $28 + back_to_back_c0_hazard + set_saved_sp sp, t0, t1 + PTR_SUBU sp, 4 * SZREG # init stack pointer + +#ifdef CONFIG_RELOCATABLE + /* Copy kernel and apply the relocations */ + jal relocate_kernel + + /* Repoint the sp into the new kernel image */ + PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE + PTR_ADDU sp, $28 + set_saved_sp sp, t0, t1 + PTR_SUBU sp, 4 * SZREG # init stack pointer + + /* + * relocate_kernel returns the entry point either + * in the relocated kernel or the original if for + * some reason relocation failed - jump there now + * with instruction hazard barrier because of the + * newly sync'd icache. + */ + jr.hb v0 +#else /* !CONFIG_RELOCATABLE */ + j start_kernel +#endif /* !CONFIG_RELOCATABLE */ + END(kernel_entry) + +#ifdef CONFIG_SMP +/* + * SMP slave cpus entry point. Board specific code for bootstrap calls this + * function after setting up the stack and gp registers. + */ +NESTED(smp_bootstrap, 16, sp) + smp_slave_setup + setup_c0_status_sec + j start_secondary + END(smp_bootstrap) +#endif /* CONFIG_SMP */ diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c new file mode 100644 index 000000000..ca21210e0 --- /dev/null +++ b/arch/mips/kernel/i8253.c @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * i8253.c 8253/PIT functions + * + */ +#include <linux/clockchips.h> +#include <linux/i8253.h> +#include <linux/export.h> +#include <linux/smp.h> +#include <linux/irq.h> + +#include <asm/time.h> + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + i8253_clockevent.event_handler(&i8253_clockevent); + + return IRQ_HANDLED; +} + +void __init setup_pit_timer(void) +{ + unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER; + + clockevent_i8253_init(true); + if (request_irq(0, timer_interrupt, flags, "timer", NULL)) + pr_err("Failed to request irq 0 (timer)\n"); +} + +static int __init init_pit_clocksource(void) +{ + if (num_possible_cpus() > 1 || /* PIT does not scale! */ + !clockevent_state_periodic(&i8253_clockevent)) + return 0; + + return clocksource_i8253_init(); +} +arch_initcall(init_pit_clocksource); diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c new file mode 100644 index 000000000..18e69ebf5 --- /dev/null +++ b/arch/mips/kernel/idle.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MIPS idle loop and WAIT instruction support. + * + * Copyright (C) xxxx the Anonymous + * Copyright (C) 1994 - 2006 Ralf Baechle + * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. + */ +#include <linux/cpu.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/irqflags.h> +#include <linux/printk.h> +#include <linux/sched.h> +#include <asm/cpu.h> +#include <asm/cpu-info.h> +#include <asm/cpu-type.h> +#include <asm/idle.h> +#include <asm/mipsregs.h> + +/* + * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, + * the implementation of the "wait" feature differs between CPU families. This + * points to the function that implements CPU specific wait. + * The wait instruction stops the pipeline and reduces the power consumption of + * the CPU very much. + */ +void (*cpu_wait)(void); +EXPORT_SYMBOL(cpu_wait); + +static void __cpuidle r3081_wait(void) +{ + unsigned long cfg = read_c0_conf(); + write_c0_conf(cfg | R30XX_CONF_HALT); + raw_local_irq_enable(); +} + +static void __cpuidle r39xx_wait(void) +{ + if (!need_resched()) + write_c0_conf(read_c0_conf() | TX39_CONF_HALT); + raw_local_irq_enable(); +} + +void __cpuidle r4k_wait(void) +{ + raw_local_irq_enable(); + __r4k_wait(); +} + +/* + * This variant is preferable as it allows testing need_resched and going to + * sleep depending on the outcome atomically. Unfortunately the "It is + * implementation-dependent whether the pipeline restarts when a non-enabled + * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes + * using this version a gamble. + */ +void __cpuidle r4k_wait_irqoff(void) +{ + if (!need_resched()) + __asm__( + " .set push \n" + " .set arch=r4000 \n" + " wait \n" + " .set pop \n"); + raw_local_irq_enable(); +} + +/* + * The RM7000 variant has to handle erratum 38. The workaround is to not + * have any pending stores when the WAIT instruction is executed. + */ +static void __cpuidle rm7k_wait_irqoff(void) +{ + if (!need_resched()) + __asm__( + " .set push \n" + " .set arch=r4000 \n" + " .set noat \n" + " mfc0 $1, $12 \n" + " sync \n" + " mtc0 $1, $12 # stalls until W stage \n" + " wait \n" + " mtc0 $1, $12 # stalls until W stage \n" + " .set pop \n"); + raw_local_irq_enable(); +} + +/* + * Au1 'wait' is only useful when the 32kHz counter is used as timer, + * since coreclock (and the cp0 counter) stops upon executing it. Only an + * interrupt can wake it, so they must be enabled before entering idle modes. + */ +static void __cpuidle au1k_wait(void) +{ + unsigned long c0status = read_c0_status() | 1; /* irqs on */ + + __asm__( + " .set push \n" + " .set arch=r4000 \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " sync \n" + " mtc0 %1, $12 \n" /* wr c0status */ + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " .set pop \n" + : : "r" (au1k_wait), "r" (c0status)); +} + +static int __initdata nowait; + +static int __init wait_disable(char *s) +{ + nowait = 1; + + return 1; +} + +__setup("nowait", wait_disable); + +void __init check_wait(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + if (nowait) { + printk("Wait instruction disabled.\n"); + return; + } + + /* + * MIPSr6 specifies that masked interrupts should unblock an executing + * wait instruction, and thus that it is safe for us to use + * r4k_wait_irqoff. Yippee! + */ + if (cpu_has_mips_r6) { + cpu_wait = r4k_wait_irqoff; + return; + } + + switch (current_cpu_type()) { + case CPU_R3081: + case CPU_R3081E: + cpu_wait = r3081_wait; + break; + case CPU_TX3927: + cpu_wait = r39xx_wait; + break; + case CPU_R4200: + case CPU_R4600: + case CPU_R4640: + case CPU_R4650: + case CPU_R4700: + case CPU_R5000: + case CPU_R5500: + case CPU_NEVADA: + case CPU_4KC: + case CPU_4KEC: + case CPU_4KSC: + case CPU_5KC: + case CPU_5KE: + case CPU_25KF: + case CPU_PR4450: + case CPU_BMIPS3300: + case CPU_BMIPS4350: + case CPU_BMIPS4380: + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: + case CPU_CAVIUM_OCTEON3: + case CPU_XBURST: + case CPU_LOONGSON32: + case CPU_XLR: + case CPU_XLP: + cpu_wait = r4k_wait; + break; + case CPU_LOONGSON64: + if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) || + (c->processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) + cpu_wait = r4k_wait; + break; + + case CPU_BMIPS5000: + cpu_wait = r4k_wait_irqoff; + break; + case CPU_RM7000: + cpu_wait = rm7k_wait_irqoff; + break; + + case CPU_PROAPTIV: + case CPU_P5600: + /* + * Incoming Fast Debug Channel (FDC) data during a wait + * instruction causes the wait never to resume, even if an + * interrupt is received. Avoid using wait at all if FDC data is + * likely to be received. + */ + if (IS_ENABLED(CONFIG_MIPS_EJTAG_FDC_TTY)) + break; + fallthrough; + case CPU_M14KC: + case CPU_M14KEC: + case CPU_24K: + case CPU_34K: + case CPU_1004K: + case CPU_1074K: + case CPU_INTERAPTIV: + case CPU_M5150: + case CPU_QEMU_GENERIC: + cpu_wait = r4k_wait; + if (read_c0_config7() & MIPS_CONF7_WII) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_74K: + cpu_wait = r4k_wait; + if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0)) + cpu_wait = r4k_wait_irqoff; + break; + + case CPU_TX49XX: + cpu_wait = r4k_wait_irqoff; + break; + case CPU_ALCHEMY: + cpu_wait = au1k_wait; + break; + case CPU_20KC: + /* + * WAIT on Rev1.0 has E1, E2, E3 and E16. + * WAIT on Rev2.0 and Rev3.0 has E16. + * Rev3.1 WAIT is nop, why bother + */ + if ((c->processor_id & 0xff) <= 0x64) + break; + + /* + * Another rev is incremeting c0_count at a reduced clock + * rate while in WAIT mode. So we basically have the choice + * between using the cp0 timer as clocksource or avoiding + * the WAIT instruction. Until more details are known, + * disable the use of WAIT for 20Kc entirely. + cpu_wait = r4k_wait; + */ + break; + default: + break; + } +} + +void arch_cpu_idle(void) +{ + if (cpu_wait) + cpu_wait(); + else + raw_local_irq_enable(); +} + +#ifdef CONFIG_CPU_IDLE + +int mips_cpuidle_wait_enter(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + arch_cpu_idle(); + return index; +} + +#endif diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c new file mode 100644 index 000000000..93bcf5736 --- /dev/null +++ b/arch/mips/kernel/irq-gt641xx.c @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GT641xx IRQ routines. + * + * Copyright (C) 2007 Yoichi Yuasa <yuasa@linux-mips.org> + */ +#include <linux/hardirq.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#include <asm/gt64120.h> + +#define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE)) + +static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock); + +static void ack_gt641xx_irq(struct irq_data *d) +{ + unsigned long flags; + u32 cause; + + raw_spin_lock_irqsave(>641xx_irq_lock, flags); + cause = GT_READ(GT_INTRCAUSE_OFS); + cause &= ~GT641XX_IRQ_TO_BIT(d->irq); + GT_WRITE(GT_INTRCAUSE_OFS, cause); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); +} + +static void mask_gt641xx_irq(struct irq_data *d) +{ + unsigned long flags; + u32 mask; + + raw_spin_lock_irqsave(>641xx_irq_lock, flags); + mask = GT_READ(GT_INTRMASK_OFS); + mask &= ~GT641XX_IRQ_TO_BIT(d->irq); + GT_WRITE(GT_INTRMASK_OFS, mask); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); +} + +static void mask_ack_gt641xx_irq(struct irq_data *d) +{ + unsigned long flags; + u32 cause, mask; + + raw_spin_lock_irqsave(>641xx_irq_lock, flags); + mask = GT_READ(GT_INTRMASK_OFS); + mask &= ~GT641XX_IRQ_TO_BIT(d->irq); + GT_WRITE(GT_INTRMASK_OFS, mask); + + cause = GT_READ(GT_INTRCAUSE_OFS); + cause &= ~GT641XX_IRQ_TO_BIT(d->irq); + GT_WRITE(GT_INTRCAUSE_OFS, cause); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); +} + +static void unmask_gt641xx_irq(struct irq_data *d) +{ + unsigned long flags; + u32 mask; + + raw_spin_lock_irqsave(>641xx_irq_lock, flags); + mask = GT_READ(GT_INTRMASK_OFS); + mask |= GT641XX_IRQ_TO_BIT(d->irq); + GT_WRITE(GT_INTRMASK_OFS, mask); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); +} + +static struct irq_chip gt641xx_irq_chip = { + .name = "GT641xx", + .irq_ack = ack_gt641xx_irq, + .irq_mask = mask_gt641xx_irq, + .irq_mask_ack = mask_ack_gt641xx_irq, + .irq_unmask = unmask_gt641xx_irq, +}; + +void gt641xx_irq_dispatch(void) +{ + u32 cause, mask; + int i; + + cause = GT_READ(GT_INTRCAUSE_OFS); + mask = GT_READ(GT_INTRMASK_OFS); + cause &= mask; + + /* + * bit0 : logical or of all the interrupt bits. + * bit30: logical or of bits[29:26,20:1]. + * bit31: logical or of bits[25:1]. + */ + for (i = 1; i < 30; i++) { + if (cause & (1U << i)) { + do_IRQ(GT641XX_IRQ_BASE + i); + return; + } + } + + atomic_inc(&irq_err_count); +} + +void __init gt641xx_irq_init(void) +{ + int i; + + GT_WRITE(GT_INTRMASK_OFS, 0); + GT_WRITE(GT_INTRCAUSE_OFS, 0); + + /* + * bit0 : logical or of all the interrupt bits. + * bit30: logical or of bits[29:26,20:1]. + * bit31: logical or of bits[25:1]. + */ + for (i = 1; i < 30; i++) + irq_set_chip_and_handler(GT641XX_IRQ_BASE + i, + >641xx_irq_chip, handle_level_irq); +} diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c new file mode 100644 index 000000000..ab511b64a --- /dev/null +++ b/arch/mips/kernel/irq-msc01.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Copyright (c) 2004 MIPS Inc + * Author: chris@mips.com + * + * Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/msc01_ic.h> +#include <asm/traps.h> + +static unsigned long _icctrl_msc; +#define MSC01_IC_REG_BASE _icctrl_msc + +#define MSCIC_WRITE(reg, data) do { *(volatile u32 *)(reg) = data; } while (0) +#define MSCIC_READ(reg, data) do { data = *(volatile u32 *)(reg); } while (0) + +static unsigned int irq_base; + +/* mask off an interrupt */ +static inline void mask_msc_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + if (irq < (irq_base + 32)) + MSCIC_WRITE(MSC01_IC_DISL, 1<<(irq - irq_base)); + else + MSCIC_WRITE(MSC01_IC_DISH, 1<<(irq - irq_base - 32)); +} + +/* unmask an interrupt */ +static inline void unmask_msc_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + if (irq < (irq_base + 32)) + MSCIC_WRITE(MSC01_IC_ENAL, 1<<(irq - irq_base)); + else + MSCIC_WRITE(MSC01_IC_ENAH, 1<<(irq - irq_base - 32)); +} + +/* + * Masks and ACKs an IRQ + */ +static void level_mask_and_ack_msc_irq(struct irq_data *d) +{ + mask_msc_irq(d); + if (!cpu_has_veic) + MSCIC_WRITE(MSC01_IC_EOI, 0); +} + +/* + * Masks and ACKs an IRQ + */ +static void edge_mask_and_ack_msc_irq(struct irq_data *d) +{ + unsigned int irq = d->irq; + + mask_msc_irq(d); + if (!cpu_has_veic) + MSCIC_WRITE(MSC01_IC_EOI, 0); + else { + u32 r; + MSCIC_READ(MSC01_IC_SUP+irq*8, r); + MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT); + MSCIC_WRITE(MSC01_IC_SUP+irq*8, r); + } +} + +/* + * Interrupt handler for interrupts coming from SOC-it. + */ +void ll_msc_irq(void) +{ + unsigned int irq; + + /* read the interrupt vector register */ + MSCIC_READ(MSC01_IC_VEC, irq); + if (irq < 64) + do_IRQ(irq + irq_base); + else { + /* Ignore spurious interrupt */ + } +} + +static void msc_bind_eic_interrupt(int irq, int set) +{ + MSCIC_WRITE(MSC01_IC_RAMW, + (irq<<MSC01_IC_RAMW_ADDR_SHF) | (set<<MSC01_IC_RAMW_DATA_SHF)); +} + +static struct irq_chip msc_levelirq_type = { + .name = "SOC-it-Level", + .irq_ack = level_mask_and_ack_msc_irq, + .irq_mask = mask_msc_irq, + .irq_mask_ack = level_mask_and_ack_msc_irq, + .irq_unmask = unmask_msc_irq, + .irq_eoi = unmask_msc_irq, +}; + +static struct irq_chip msc_edgeirq_type = { + .name = "SOC-it-Edge", + .irq_ack = edge_mask_and_ack_msc_irq, + .irq_mask = mask_msc_irq, + .irq_mask_ack = edge_mask_and_ack_msc_irq, + .irq_unmask = unmask_msc_irq, + .irq_eoi = unmask_msc_irq, +}; + + +void __init init_msc_irqs(unsigned long icubase, unsigned int irqbase, msc_irqmap_t *imp, int nirq) +{ + _icctrl_msc = (unsigned long) ioremap(icubase, 0x40000); + + /* Reset interrupt controller - initialises all registers to 0 */ + MSCIC_WRITE(MSC01_IC_RST, MSC01_IC_RST_RST_BIT); + + board_bind_eic_interrupt = &msc_bind_eic_interrupt; + + for (; nirq > 0; nirq--, imp++) { + int n = imp->im_irq; + + switch (imp->im_type) { + case MSC01_IRQ_EDGE: + irq_set_chip_and_handler_name(irqbase + n, + &msc_edgeirq_type, + handle_edge_irq, + "edge"); + if (cpu_has_veic) + MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT); + else + MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl); + break; + case MSC01_IRQ_LEVEL: + irq_set_chip_and_handler_name(irqbase + n, + &msc_levelirq_type, + handle_level_irq, + "level"); + if (cpu_has_veic) + MSCIC_WRITE(MSC01_IC_SUP+n*8, 0); + else + MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl); + } + } + + irq_base = irqbase; + + MSCIC_WRITE(MSC01_IC_GENA, MSC01_IC_GENA_GENA_BIT); /* Enable interrupt generation */ + +} diff --git a/arch/mips/kernel/irq-rm7000.c b/arch/mips/kernel/irq-rm7000.c new file mode 100644 index 000000000..e1a497f63 --- /dev/null +++ b/arch/mips/kernel/irq-rm7000.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2003 Ralf Baechle + * + * Handler for RM7000 extended interrupts. These are a non-standard + * feature so we handle them separately from standard interrupts. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> + +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> + +static inline void unmask_rm7k_irq(struct irq_data *d) +{ + set_c0_intcontrol(0x100 << (d->irq - RM7K_CPU_IRQ_BASE)); +} + +static inline void mask_rm7k_irq(struct irq_data *d) +{ + clear_c0_intcontrol(0x100 << (d->irq - RM7K_CPU_IRQ_BASE)); +} + +static struct irq_chip rm7k_irq_controller = { + .name = "RM7000", + .irq_ack = mask_rm7k_irq, + .irq_mask = mask_rm7k_irq, + .irq_mask_ack = mask_rm7k_irq, + .irq_unmask = unmask_rm7k_irq, + .irq_eoi = unmask_rm7k_irq +}; + +void __init rm7k_cpu_irq_init(void) +{ + int base = RM7K_CPU_IRQ_BASE; + int i; + + clear_c0_intcontrol(0x00000f00); /* Mask all */ + + for (i = base; i < base + 4; i++) + irq_set_chip_and_handler(i, &rm7k_irq_controller, + handle_percpu_irq); +} diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c new file mode 100644 index 000000000..85b6c60f2 --- /dev/null +++ b/arch/mips/kernel/irq.c @@ -0,0 +1,109 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Code to handle x86 style IRQs plus some generic interrupt stuff. + * + * Copyright (C) 1992 Linus Torvalds + * Copyright (C) 1994 - 2000 Ralf Baechle + */ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel_stat.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/random.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/kallsyms.h> +#include <linux/kgdb.h> +#include <linux/ftrace.h> + +#include <linux/atomic.h> +#include <linux/uaccess.h> + +void *irq_stack[NR_CPUS]; + +/* + * 'what should we do if we get a hw irq event on an illegal vector'. + * each architecture has to answer this themselves. + */ +void ack_bad_irq(unsigned int irq) +{ + printk("unexpected IRQ # %d\n", irq); +} + +atomic_t irq_err_count; + +int arch_show_interrupts(struct seq_file *p, int prec) +{ + seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count)); + return 0; +} + +asmlinkage void spurious_interrupt(void) +{ + atomic_inc(&irq_err_count); +} + +void __init init_IRQ(void) +{ + int i; + unsigned int order = get_order(IRQ_STACK_SIZE); + + for (i = 0; i < NR_IRQS; i++) + irq_set_noprobe(i); + + if (cpu_has_veic) + clear_c0_status(ST0_IM); + + arch_init_irq(); + + for_each_possible_cpu(i) { + void *s = (void *)__get_free_pages(GFP_KERNEL, order); + + irq_stack[i] = s; + pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i, + irq_stack[i], irq_stack[i] + IRQ_STACK_SIZE); + } +} + +#ifdef CONFIG_DEBUG_STACKOVERFLOW +static inline void check_stack_overflow(void) +{ + unsigned long sp; + + __asm__ __volatile__("move %0, $sp" : "=r" (sp)); + sp &= THREAD_MASK; + + /* + * Check for stack overflow: is there less than STACK_WARN free? + * STACK_WARN is defined as 1/8 of THREAD_SIZE by default. + */ + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { + printk("do_IRQ: stack overflow: %ld\n", + sp - sizeof(struct thread_info)); + dump_stack(); + } +} +#else +static inline void check_stack_overflow(void) {} +#endif + + +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +void __irq_entry do_IRQ(unsigned int irq) +{ + irq_enter(); + check_stack_overflow(); + generic_handle_irq(irq); + irq_exit(); +} + diff --git a/arch/mips/kernel/irq_txx9.c b/arch/mips/kernel/irq_txx9.c new file mode 100644 index 000000000..ab00e4904 --- /dev/null +++ b/arch/mips/kernel/irq_txx9.c @@ -0,0 +1,191 @@ +/* + * Based on linux/arch/mips/jmr3927/rbhma3100/irq.c, + * linux/arch/mips/tx4927/common/tx4927_irq.c, + * linux/arch/mips/tx4938/common/irq.c + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * source@mvista.com + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <asm/txx9irq.h> + +struct txx9_irc_reg { + u32 cer; + u32 cr[2]; + u32 unused0; + u32 ilr[8]; + u32 unused1[4]; + u32 imr; + u32 unused2[7]; + u32 scr; + u32 unused3[7]; + u32 ssr; + u32 unused4[7]; + u32 csr; +}; + +/* IRCER : Int. Control Enable */ +#define TXx9_IRCER_ICE 0x00000001 + +/* IRCR : Int. Control */ +#define TXx9_IRCR_LOW 0x00000000 +#define TXx9_IRCR_HIGH 0x00000001 +#define TXx9_IRCR_DOWN 0x00000002 +#define TXx9_IRCR_UP 0x00000003 +#define TXx9_IRCR_EDGE(cr) ((cr) & 0x00000002) + +/* IRSCR : Int. Status Control */ +#define TXx9_IRSCR_EIClrE 0x00000100 +#define TXx9_IRSCR_EIClr_MASK 0x0000000f + +/* IRCSR : Int. Current Status */ +#define TXx9_IRCSR_IF 0x00010000 +#define TXx9_IRCSR_ILV_MASK 0x00000700 +#define TXx9_IRCSR_IVL_MASK 0x0000001f + +#define irc_dlevel 0 +#define irc_elevel 1 + +static struct txx9_irc_reg __iomem *txx9_ircptr __read_mostly; + +static struct { + unsigned char level; + unsigned char mode; +} txx9irq[TXx9_MAX_IR] __read_mostly; + +static void txx9_irq_unmask(struct irq_data *d) +{ + unsigned int irq_nr = d->irq - TXX9_IRQ_BASE; + u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16 ) / 2]; + int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8; + + __raw_writel((__raw_readl(ilrp) & ~(0xff << ofs)) + | (txx9irq[irq_nr].level << ofs), + ilrp); +#ifdef CONFIG_CPU_TX39XX + /* update IRCSR */ + __raw_writel(0, &txx9_ircptr->imr); + __raw_writel(irc_elevel, &txx9_ircptr->imr); +#endif +} + +static inline void txx9_irq_mask(struct irq_data *d) +{ + unsigned int irq_nr = d->irq - TXX9_IRQ_BASE; + u32 __iomem *ilrp = &txx9_ircptr->ilr[(irq_nr % 16) / 2]; + int ofs = irq_nr / 16 * 16 + (irq_nr & 1) * 8; + + __raw_writel((__raw_readl(ilrp) & ~(0xff << ofs)) + | (irc_dlevel << ofs), + ilrp); +#ifdef CONFIG_CPU_TX39XX + /* update IRCSR */ + __raw_writel(0, &txx9_ircptr->imr); + __raw_writel(irc_elevel, &txx9_ircptr->imr); + /* flush write buffer */ + __raw_readl(&txx9_ircptr->ssr); +#else + mmiowb(); +#endif +} + +static void txx9_irq_mask_ack(struct irq_data *d) +{ + unsigned int irq_nr = d->irq - TXX9_IRQ_BASE; + + txx9_irq_mask(d); + /* clear edge detection */ + if (unlikely(TXx9_IRCR_EDGE(txx9irq[irq_nr].mode))) + __raw_writel(TXx9_IRSCR_EIClrE | irq_nr, &txx9_ircptr->scr); +} + +static int txx9_irq_set_type(struct irq_data *d, unsigned int flow_type) +{ + unsigned int irq_nr = d->irq - TXX9_IRQ_BASE; + u32 cr; + u32 __iomem *crp; + int ofs; + int mode; + + if (flow_type & IRQF_TRIGGER_PROBE) + return 0; + switch (flow_type & IRQF_TRIGGER_MASK) { + case IRQF_TRIGGER_RISING: mode = TXx9_IRCR_UP; break; + case IRQF_TRIGGER_FALLING: mode = TXx9_IRCR_DOWN; break; + case IRQF_TRIGGER_HIGH: mode = TXx9_IRCR_HIGH; break; + case IRQF_TRIGGER_LOW: mode = TXx9_IRCR_LOW; break; + default: + return -EINVAL; + } + crp = &txx9_ircptr->cr[(unsigned int)irq_nr / 8]; + cr = __raw_readl(crp); + ofs = (irq_nr & (8 - 1)) * 2; + cr &= ~(0x3 << ofs); + cr |= (mode & 0x3) << ofs; + __raw_writel(cr, crp); + txx9irq[irq_nr].mode = mode; + return 0; +} + +static struct irq_chip txx9_irq_chip = { + .name = "TXX9", + .irq_ack = txx9_irq_mask_ack, + .irq_mask = txx9_irq_mask, + .irq_mask_ack = txx9_irq_mask_ack, + .irq_unmask = txx9_irq_unmask, + .irq_set_type = txx9_irq_set_type, +}; + +void __init txx9_irq_init(unsigned long baseaddr) +{ + int i; + + txx9_ircptr = ioremap(baseaddr, sizeof(struct txx9_irc_reg)); + for (i = 0; i < TXx9_MAX_IR; i++) { + txx9irq[i].level = 4; /* middle level */ + txx9irq[i].mode = TXx9_IRCR_LOW; + irq_set_chip_and_handler(TXX9_IRQ_BASE + i, &txx9_irq_chip, + handle_level_irq); + } + + /* mask all IRC interrupts */ + __raw_writel(0, &txx9_ircptr->imr); + for (i = 0; i < 8; i++) + __raw_writel(0, &txx9_ircptr->ilr[i]); + /* setup IRC interrupt mode (Low Active) */ + for (i = 0; i < 2; i++) + __raw_writel(0, &txx9_ircptr->cr[i]); + /* enable interrupt control */ + __raw_writel(TXx9_IRCER_ICE, &txx9_ircptr->cer); + __raw_writel(irc_elevel, &txx9_ircptr->imr); +} + +int __init txx9_irq_set_pri(int irc_irq, int new_pri) +{ + int old_pri; + + if ((unsigned int)irc_irq >= TXx9_MAX_IR) + return 0; + old_pri = txx9irq[irc_irq].level; + txx9irq[irc_irq].level = new_pri; + return old_pri; +} + +int txx9_irq(void) +{ + u32 csr = __raw_readl(&txx9_ircptr->csr); + + if (likely(!(csr & TXx9_IRCSR_IF))) + return TXX9_IRQ_BASE + (csr & (TXx9_MAX_IR - 1)); + return -1; +} diff --git a/arch/mips/kernel/jump_label.c b/arch/mips/kernel/jump_label.c new file mode 100644 index 000000000..9f5b1247b --- /dev/null +++ b/arch/mips/kernel/jump_label.c @@ -0,0 +1,90 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2010 Cavium Networks, Inc. + */ + +#include <linux/jump_label.h> +#include <linux/kernel.h> +#include <linux/memory.h> +#include <linux/mutex.h> +#include <linux/types.h> +#include <linux/cpu.h> + +#include <asm/cacheflush.h> +#include <asm/inst.h> + +/* + * Define parameters for the standard MIPS and the microMIPS jump + * instruction encoding respectively: + * + * - the ISA bit of the target, either 0 or 1 respectively, + * + * - the amount the jump target address is shifted right to fit in the + * immediate field of the machine instruction, either 2 or 1, + * + * - the mask determining the size of the jump region relative to the + * delay-slot instruction, either 256MB or 128MB, + * + * - the jump target alignment, either 4 or 2 bytes. + */ +#define J_ISA_BIT IS_ENABLED(CONFIG_CPU_MICROMIPS) +#define J_RANGE_SHIFT (2 - J_ISA_BIT) +#define J_RANGE_MASK ((1ul << (26 + J_RANGE_SHIFT)) - 1) +#define J_ALIGN_MASK ((1ul << J_RANGE_SHIFT) - 1) + +void arch_jump_label_transform(struct jump_entry *e, + enum jump_label_type type) +{ + union mips_instruction *insn_p; + union mips_instruction insn; + long offset; + + insn_p = (union mips_instruction *)msk_isa16_mode(e->code); + + /* Target must have the right alignment and ISA must be preserved. */ + BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT); + + if (type == JUMP_LABEL_JMP) { + if (!IS_ENABLED(CONFIG_CPU_MICROMIPS) && MIPS_ISA_REV >= 6) { + offset = e->target - ((unsigned long)insn_p + 4); + offset >>= 2; + + /* + * The branch offset must fit in the instruction's 26 + * bit field. + */ + WARN_ON((offset >= (long)BIT(25)) || + (offset < -(long)BIT(25))); + + insn.j_format.opcode = bc6_op; + insn.j_format.target = offset; + } else { + /* + * Jump only works within an aligned region its delay + * slot is in. + */ + WARN_ON((e->target & ~J_RANGE_MASK) != + ((e->code + 4) & ~J_RANGE_MASK)); + + insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op; + insn.j_format.target = e->target >> J_RANGE_SHIFT; + } + } else { + insn.word = 0; /* nop */ + } + + mutex_lock(&text_mutex); + if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) { + insn_p->halfword[0] = insn.word >> 16; + insn_p->halfword[1] = insn.word; + } else + *insn_p = insn; + + flush_icache_range((unsigned long)insn_p, + (unsigned long)insn_p + sizeof(*insn_p)); + + mutex_unlock(&text_mutex); +} diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c new file mode 100644 index 000000000..ea781b29f --- /dev/null +++ b/arch/mips/kernel/kgdb.c @@ -0,0 +1,415 @@ +/* + * Originally written by Glenn Engel, Lake Stevens Instrument Division + * + * Contributed by HP Systems + * + * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse + * Send complaints, suggestions etc. to <andy@waldorf-gmbh.de> + * + * Copyright (C) 1995 Andreas Busse + * + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Copyright (C) 2004-2005 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com + * + * Copyright (C) 2007-2008 Wind River Systems, Inc. + * Author/Maintainer: Jason Wessel, jason.wessel@windriver.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/ptrace.h> /* for linux pt_regs struct */ +#include <linux/kgdb.h> +#include <linux/kdebug.h> +#include <linux/sched.h> +#include <linux/smp.h> +#include <asm/inst.h> +#include <asm/fpu.h> +#include <asm/cacheflush.h> +#include <asm/processor.h> +#include <asm/sigcontext.h> +#include <linux/uaccess.h> +#include <asm/irq_regs.h> + +static struct hard_trap_info { + unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */ + unsigned char signo; /* Signal that we map this trap into */ +} hard_trap_info[] = { + { 6, SIGBUS }, /* instruction bus error */ + { 7, SIGBUS }, /* data bus error */ + { 9, SIGTRAP }, /* break */ +/* { 11, SIGILL }, */ /* CPU unusable */ + { 12, SIGFPE }, /* overflow */ + { 13, SIGTRAP }, /* trap */ + { 14, SIGSEGV }, /* virtual instruction cache coherency */ + { 15, SIGFPE }, /* floating point exception */ + { 23, SIGSEGV }, /* watch */ + { 31, SIGSEGV }, /* virtual data cache coherency */ + { 0, 0} /* Must be last */ +}; + +struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = +{ + { "zero", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[0]) }, + { "at", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[1]) }, + { "v0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[2]) }, + { "v1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[3]) }, + { "a0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[4]) }, + { "a1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[5]) }, + { "a2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[6]) }, + { "a3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[7]) }, + { "t0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[8]) }, + { "t1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[9]) }, + { "t2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[10]) }, + { "t3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[11]) }, + { "t4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[12]) }, + { "t5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[13]) }, + { "t6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[14]) }, + { "t7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[15]) }, + { "s0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[16]) }, + { "s1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[17]) }, + { "s2", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[18]) }, + { "s3", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[19]) }, + { "s4", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[20]) }, + { "s5", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[21]) }, + { "s6", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[22]) }, + { "s7", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[23]) }, + { "t8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[24]) }, + { "t9", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[25]) }, + { "k0", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[26]) }, + { "k1", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[27]) }, + { "gp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[28]) }, + { "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[29]) }, + { "s8", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[30]) }, + { "ra", GDB_SIZEOF_REG, offsetof(struct pt_regs, regs[31]) }, + { "sr", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_status) }, + { "lo", GDB_SIZEOF_REG, offsetof(struct pt_regs, lo) }, + { "hi", GDB_SIZEOF_REG, offsetof(struct pt_regs, hi) }, + { "bad", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_badvaddr) }, + { "cause", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_cause) }, + { "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, cp0_epc) }, + { "f0", GDB_SIZEOF_REG, 0 }, + { "f1", GDB_SIZEOF_REG, 1 }, + { "f2", GDB_SIZEOF_REG, 2 }, + { "f3", GDB_SIZEOF_REG, 3 }, + { "f4", GDB_SIZEOF_REG, 4 }, + { "f5", GDB_SIZEOF_REG, 5 }, + { "f6", GDB_SIZEOF_REG, 6 }, + { "f7", GDB_SIZEOF_REG, 7 }, + { "f8", GDB_SIZEOF_REG, 8 }, + { "f9", GDB_SIZEOF_REG, 9 }, + { "f10", GDB_SIZEOF_REG, 10 }, + { "f11", GDB_SIZEOF_REG, 11 }, + { "f12", GDB_SIZEOF_REG, 12 }, + { "f13", GDB_SIZEOF_REG, 13 }, + { "f14", GDB_SIZEOF_REG, 14 }, + { "f15", GDB_SIZEOF_REG, 15 }, + { "f16", GDB_SIZEOF_REG, 16 }, + { "f17", GDB_SIZEOF_REG, 17 }, + { "f18", GDB_SIZEOF_REG, 18 }, + { "f19", GDB_SIZEOF_REG, 19 }, + { "f20", GDB_SIZEOF_REG, 20 }, + { "f21", GDB_SIZEOF_REG, 21 }, + { "f22", GDB_SIZEOF_REG, 22 }, + { "f23", GDB_SIZEOF_REG, 23 }, + { "f24", GDB_SIZEOF_REG, 24 }, + { "f25", GDB_SIZEOF_REG, 25 }, + { "f26", GDB_SIZEOF_REG, 26 }, + { "f27", GDB_SIZEOF_REG, 27 }, + { "f28", GDB_SIZEOF_REG, 28 }, + { "f29", GDB_SIZEOF_REG, 29 }, + { "f30", GDB_SIZEOF_REG, 30 }, + { "f31", GDB_SIZEOF_REG, 31 }, + { "fsr", GDB_SIZEOF_REG, 0 }, + { "fir", GDB_SIZEOF_REG, 0 }, +}; + +int dbg_set_reg(int regno, void *mem, struct pt_regs *regs) +{ + int fp_reg; + + if (regno < 0 || regno >= DBG_MAX_REG_NUM) + return -EINVAL; + + if (dbg_reg_def[regno].offset != -1 && regno < 38) { + memcpy((void *)regs + dbg_reg_def[regno].offset, mem, + dbg_reg_def[regno].size); + } else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) { + /* FP registers 38 -> 69 */ + if (!(regs->cp0_status & ST0_CU1)) + return 0; + if (regno == 70) { + /* Process the fcr31/fsr (register 70) */ + memcpy((void *)¤t->thread.fpu.fcr31, mem, + dbg_reg_def[regno].size); + goto out_save; + } else if (regno == 71) { + /* Ignore the fir (register 71) */ + goto out_save; + } + fp_reg = dbg_reg_def[regno].offset; + memcpy((void *)¤t->thread.fpu.fpr[fp_reg], mem, + dbg_reg_def[regno].size); +out_save: + restore_fp(current); + } + + return 0; +} + +char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs) +{ + int fp_reg; + + if (regno >= DBG_MAX_REG_NUM || regno < 0) + return NULL; + + if (dbg_reg_def[regno].offset != -1 && regno < 38) { + /* First 38 registers */ + memcpy(mem, (void *)regs + dbg_reg_def[regno].offset, + dbg_reg_def[regno].size); + } else if (current && dbg_reg_def[regno].offset != -1 && regno < 72) { + /* FP registers 38 -> 69 */ + if (!(regs->cp0_status & ST0_CU1)) + goto out; + save_fp(current); + if (regno == 70) { + /* Process the fcr31/fsr (register 70) */ + memcpy(mem, (void *)¤t->thread.fpu.fcr31, + dbg_reg_def[regno].size); + goto out; + } else if (regno == 71) { + /* Ignore the fir (register 71) */ + memset(mem, 0, dbg_reg_def[regno].size); + goto out; + } + fp_reg = dbg_reg_def[regno].offset; + memcpy(mem, (void *)¤t->thread.fpu.fpr[fp_reg], + dbg_reg_def[regno].size); + } + +out: + return dbg_reg_def[regno].name; + +} + +void arch_kgdb_breakpoint(void) +{ + __asm__ __volatile__( + ".globl breakinst\n\t" + ".set\tnoreorder\n\t" + "nop\n" + "breakinst:\tbreak\n\t" + "nop\n\t" + ".set\treorder"); +} + +void kgdb_call_nmi_hook(void *ignored) +{ + mm_segment_t old_fs; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + + kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); + + set_fs(old_fs); +} + +static int compute_signal(int tt) +{ + struct hard_trap_info *ht; + + for (ht = hard_trap_info; ht->tt && ht->signo; ht++) + if (ht->tt == tt) + return ht->signo; + + return SIGHUP; /* default for things we don't know about */ +} + +/* + * Similar to regs_to_gdb_regs() except that process is sleeping and so + * we may not be able to get all the info. + */ +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + int reg; +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 16; reg++) + *(ptr++) = 0; + + /* S0 - S7 */ + *(ptr++) = p->thread.reg16; + *(ptr++) = p->thread.reg17; + *(ptr++) = p->thread.reg18; + *(ptr++) = p->thread.reg19; + *(ptr++) = p->thread.reg20; + *(ptr++) = p->thread.reg21; + *(ptr++) = p->thread.reg22; + *(ptr++) = p->thread.reg23; + + for (reg = 24; reg < 28; reg++) + *(ptr++) = 0; + + /* GP, SP, FP, RA */ + *(ptr++) = (long)p; + *(ptr++) = p->thread.reg29; + *(ptr++) = p->thread.reg30; + *(ptr++) = p->thread.reg31; + + *(ptr++) = p->thread.cp0_status; + + /* lo, hi */ + *(ptr++) = 0; + *(ptr++) = 0; + + /* + * BadVAddr, Cause + * Ideally these would come from the last exception frame up the stack + * but that requires unwinding, otherwise we can't know much for sure. + */ + *(ptr++) = 0; + *(ptr++) = 0; + + /* + * PC + * use return address (RA), i.e. the moment after return from resume() + */ + *(ptr++) = p->thread.reg31; +} + +void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc) +{ + regs->cp0_epc = pc; +} + +/* + * Calls linux_debug_hook before the kernel dies. If KGDB is enabled, + * then try to fall into the debugger + */ +static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd, + void *ptr) +{ + struct die_args *args = (struct die_args *)ptr; + struct pt_regs *regs = args->regs; + int trap = (regs->cp0_cause & 0x7c) >> 2; + mm_segment_t old_fs; + +#ifdef CONFIG_KPROBES + /* + * Return immediately if the kprobes fault notifier has set + * DIE_PAGE_FAULT. + */ + if (cmd == DIE_PAGE_FAULT) + return NOTIFY_DONE; +#endif /* CONFIG_KPROBES */ + + /* Userspace events, ignore. */ + if (user_mode(regs)) + return NOTIFY_DONE; + + /* Kernel mode. Set correct address limit */ + old_fs = get_fs(); + set_fs(KERNEL_DS); + + if (atomic_read(&kgdb_active) != -1) + kgdb_nmicallback(smp_processor_id(), regs); + + if (kgdb_handle_exception(trap, compute_signal(trap), cmd, regs)) { + set_fs(old_fs); + return NOTIFY_DONE; + } + + if (atomic_read(&kgdb_setting_breakpoint)) + if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst)) + regs->cp0_epc += 4; + + /* In SMP mode, __flush_cache_all does IPI */ + local_irq_enable(); + __flush_cache_all(); + + set_fs(old_fs); + return NOTIFY_STOP; +} + +#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP +int kgdb_ll_trap(int cmd, const char *str, + struct pt_regs *regs, long err, int trap, int sig) +{ + struct die_args args = { + .regs = regs, + .str = str, + .err = err, + .trapnr = trap, + .signr = sig, + + }; + + if (!kgdb_io_module_registered) + return NOTIFY_DONE; + + return kgdb_mips_notify(NULL, cmd, &args); +} +#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */ + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_mips_notify, +}; + +/* + * Handle the 'c' command + */ +int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, char *remcom_out_buffer, + struct pt_regs *regs) +{ + char *ptr; + unsigned long address; + + switch (remcom_in_buffer[0]) { + case 'c': + /* handle the optional parameter */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &address)) + regs->cp0_epc = address; + + return 0; + } + + return -1; +} + +const struct kgdb_arch arch_kgdb_ops = { +#ifdef CONFIG_CPU_BIG_ENDIAN + .gdb_bpt_instr = { spec_op << 2, 0x00, 0x00, break_op }, +#else + .gdb_bpt_instr = { break_op, 0x00, 0x00, spec_op << 2 }, +#endif +}; + +int kgdb_arch_init(void) +{ + register_die_notifier(&kgdb_notifier); + + return 0; +} + +/* + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_die_notifier(&kgdb_notifier); +} diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c new file mode 100644 index 000000000..54dfba8fa --- /dev/null +++ b/arch/mips/kernel/kprobes.c @@ -0,0 +1,518 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Kernel Probes (KProbes) + * arch/mips/kernel/kprobes.c + * + * Copyright 2006 Sony Corp. + * Copyright 2010 Cavium Networks + * + * Some portions copied from the powerpc version. + * + * Copyright (C) IBM Corporation, 2002, 2004 + */ + +#include <linux/kprobes.h> +#include <linux/preempt.h> +#include <linux/uaccess.h> +#include <linux/kdebug.h> +#include <linux/slab.h> + +#include <asm/ptrace.h> +#include <asm/branch.h> +#include <asm/break.h> + +#include "probes-common.h" + +static const union mips_instruction breakpoint_insn = { + .b_format = { + .opcode = spec_op, + .code = BRK_KPROBE_BP, + .func = break_op + } +}; + +static const union mips_instruction breakpoint2_insn = { + .b_format = { + .opcode = spec_op, + .code = BRK_KPROBE_SSTEPBP, + .func = break_op + } +}; + +DEFINE_PER_CPU(struct kprobe *, current_kprobe); +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +static int __kprobes insn_has_delayslot(union mips_instruction insn) +{ + return __insn_has_delay_slot(insn); +} + +/* + * insn_has_ll_or_sc function checks whether instruction is ll or sc + * one; putting breakpoint on top of atomic ll/sc pair is bad idea; + * so we need to prevent it and refuse kprobes insertion for such + * instructions; cannot do much about breakpoint in the middle of + * ll/sc pair; it is upto user to avoid those places + */ +static int __kprobes insn_has_ll_or_sc(union mips_instruction insn) +{ + int ret = 0; + + switch (insn.i_format.opcode) { + case ll_op: + case lld_op: + case sc_op: + case scd_op: + ret = 1; + break; + default: + break; + } + return ret; +} + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + union mips_instruction insn; + union mips_instruction prev_insn; + int ret = 0; + + insn = p->addr[0]; + + if (insn_has_ll_or_sc(insn)) { + pr_notice("Kprobes for ll and sc instructions are not" + "supported\n"); + ret = -EINVAL; + goto out; + } + + if (copy_from_kernel_nofault(&prev_insn, p->addr - 1, + sizeof(mips_instruction)) == 0 && + insn_has_delayslot(prev_insn)) { + pr_notice("Kprobes for branch delayslot are not supported\n"); + ret = -EINVAL; + goto out; + } + + if (__insn_is_compact_branch(insn)) { + pr_notice("Kprobes for compact branches are not supported\n"); + ret = -EINVAL; + goto out; + } + + /* insn: must be on special executable page on mips. */ + p->ainsn.insn = get_insn_slot(); + if (!p->ainsn.insn) { + ret = -ENOMEM; + goto out; + } + + /* + * In the kprobe->ainsn.insn[] array we store the original + * instruction at index zero and a break trap instruction at + * index one. + * + * On MIPS arch if the instruction at probed address is a + * branch instruction, we need to execute the instruction at + * Branch Delayslot (BD) at the time of probe hit. As MIPS also + * doesn't have single stepping support, the BD instruction can + * not be executed in-line and it would be executed on SSOL slot + * using a normal breakpoint instruction in the next slot. + * So, read the instruction and save it for later execution. + */ + if (insn_has_delayslot(insn)) + memcpy(&p->ainsn.insn[0], p->addr + 1, sizeof(kprobe_opcode_t)); + else + memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t)); + + p->ainsn.insn[1] = breakpoint2_insn; + p->opcode = *p->addr; + +out: + return ret; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = breakpoint_insn; + flush_insn_slot(p); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_insn_slot(p); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + if (p->ainsn.insn) { + free_insn_slot(p->ainsn.insn, 0); + p->ainsn.insn = NULL; + } +} + +static void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.old_SR = kcb->kprobe_old_SR; + kcb->prev_kprobe.saved_SR = kcb->kprobe_saved_SR; + kcb->prev_kprobe.saved_epc = kcb->kprobe_saved_epc; +} + +static void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_old_SR = kcb->prev_kprobe.old_SR; + kcb->kprobe_saved_SR = kcb->prev_kprobe.saved_SR; + kcb->kprobe_saved_epc = kcb->prev_kprobe.saved_epc; +} + +static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + __this_cpu_write(current_kprobe, p); + kcb->kprobe_saved_SR = kcb->kprobe_old_SR = (regs->cp0_status & ST0_IE); + kcb->kprobe_saved_epc = regs->cp0_epc; +} + +/** + * evaluate_branch_instrucion - + * + * Evaluate the branch instruction at probed address during probe hit. The + * result of evaluation would be the updated epc. The insturction in delayslot + * would actually be single stepped using a normal breakpoint) on SSOL slot. + * + * The result is also saved in the kprobe control block for later use, + * in case we need to execute the delayslot instruction. The latter will be + * false for NOP instruction in dealyslot and the branch-likely instructions + * when the branch is taken. And for those cases we set a flag as + * SKIP_DELAYSLOT in the kprobe control block + */ +static int evaluate_branch_instruction(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + union mips_instruction insn = p->opcode; + long epc; + int ret = 0; + + epc = regs->cp0_epc; + if (epc & 3) + goto unaligned; + + if (p->ainsn.insn->word == 0) + kcb->flags |= SKIP_DELAYSLOT; + else + kcb->flags &= ~SKIP_DELAYSLOT; + + ret = __compute_return_epc_for_insn(regs, insn); + if (ret < 0) + return ret; + + if (ret == BRANCH_LIKELY_TAKEN) + kcb->flags |= SKIP_DELAYSLOT; + + kcb->target_epc = regs->cp0_epc; + + return 0; + +unaligned: + pr_notice("%s: unaligned epc - sending SIGBUS.\n", current->comm); + force_sig(SIGBUS); + return -EFAULT; + +} + +static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + int ret = 0; + + regs->cp0_status &= ~ST0_IE; + + /* single step inline if the instruction is a break */ + if (p->opcode.word == breakpoint_insn.word || + p->opcode.word == breakpoint2_insn.word) + regs->cp0_epc = (unsigned long)p->addr; + else if (insn_has_delayslot(p->opcode)) { + ret = evaluate_branch_instruction(p, regs, kcb); + if (ret < 0) { + pr_notice("Kprobes: Error in evaluating branch\n"); + return; + } + } + regs->cp0_epc = (unsigned long)&p->ainsn.insn[0]; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "break 0" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + * + * This function prepares to return from the post-single-step + * breakpoint trap. In case of branch instructions, the target + * epc to be restored. + */ +static void __kprobes resume_execution(struct kprobe *p, + struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + if (insn_has_delayslot(p->opcode)) + regs->cp0_epc = kcb->target_epc; + else { + unsigned long orig_epc = kcb->kprobe_saved_epc; + regs->cp0_epc = orig_epc + 4; + } +} + +static int __kprobes kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + int ret = 0; + kprobe_opcode_t *addr; + struct kprobe_ctlblk *kcb; + + addr = (kprobe_opcode_t *) regs->cp0_epc; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); + + /* Check we're not actually recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + if (kcb->kprobe_status == KPROBE_HIT_SS && + p->ainsn.insn->word == breakpoint_insn.word) { + regs->cp0_status &= ~ST0_IE; + regs->cp0_status |= kcb->kprobe_saved_SR; + goto no_kprobe; + } + /* + * We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kprobes_inc_nmissed_count(p); + prepare_singlestep(p, regs, kcb); + kcb->kprobe_status = KPROBE_REENTER; + if (kcb->flags & SKIP_DELAYSLOT) { + resume_execution(p, regs, kcb); + restore_previous_kprobe(kcb); + preempt_enable_no_resched(); + } + return 1; + } else if (addr->word != breakpoint_insn.word) { + /* + * The breakpoint instruction was removed by + * another cpu right after we hit, no further + * handling of this interrupt is appropriate + */ + ret = 1; + } + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) { + if (addr->word != breakpoint_insn.word) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + } + /* Not one of ours: let kernel handle it */ + goto no_kprobe; + } + + set_current_kprobe(p, regs, kcb); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + if (p->pre_handler && p->pre_handler(p, regs)) { + /* handler has already set things up, so skip ss setup */ + reset_current_kprobe(); + preempt_enable_no_resched(); + return 1; + } + + prepare_singlestep(p, regs, kcb); + if (kcb->flags & SKIP_DELAYSLOT) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + if (p->post_handler) + p->post_handler(p, regs, 0); + resume_execution(p, regs, kcb); + preempt_enable_no_resched(); + } else + kcb->kprobe_status = KPROBE_HIT_SS; + + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; + +} + +static inline int post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs, kcb); + + regs->cp0_status |= kcb->kprobe_saved_SR; + + /* Restore back the original saved kprobes variables and continue. */ + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + reset_current_kprobe(); +out: + preempt_enable_no_resched(); + + return 1; +} + +int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs, kcb); + regs->cp0_status |= kcb->kprobe_old_SR; + + reset_current_kprobe(); + preempt_enable_no_resched(); + } + return 0; +} + +/* + * Wrapper routine for handling exceptions. + */ +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_BREAK: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_SSTEPBP: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + + case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + + if (kprobe_running() + && kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); + break; + default: + break; + } + return ret; +} + +/* + * Function return probe trampoline: + * - init_kprobes() establishes a probepoint here + * - When the probed function returns, this probe causes the + * handlers to fire + */ +static void __used kretprobe_trampoline_holder(void) +{ + asm volatile( + ".set push\n\t" + /* Keep the assembler from reordering and placing JR here. */ + ".set noreorder\n\t" + "nop\n\t" + ".global kretprobe_trampoline\n" + "kretprobe_trampoline:\n\t" + "nop\n\t" + ".set pop" + : : : "memory"); +} + +void kretprobe_trampoline(void); + +void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + ri->ret_addr = (kprobe_opcode_t *) regs->regs[31]; + ri->fp = NULL; + + /* Replace the return addr with trampoline addr */ + regs->regs[31] = (unsigned long)kretprobe_trampoline; +} + +/* + * Called when the probe at kretprobe trampoline is hit + */ +static int __kprobes trampoline_probe_handler(struct kprobe *p, + struct pt_regs *regs) +{ + instruction_pointer(regs) = __kretprobe_trampoline_handler(regs, + kretprobe_trampoline, NULL); + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; +} + +int __kprobes arch_trampoline_kprobe(struct kprobe *p) +{ + if (p->addr == (kprobe_opcode_t *)kretprobe_trampoline) + return 1; + + return 0; +} + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *)kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c new file mode 100644 index 000000000..6b61be486 --- /dev/null +++ b/arch/mips/kernel/linux32.c @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Conversion between 32-bit and 64-bit native system calls. + * + * Copyright (C) 2000 Silicon Graphics, Inc. + * Written by Ulf Carlsson (ulfc@engr.sgi.com) + */ +#include <linux/compiler.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/file.h> +#include <linux/highuid.h> +#include <linux/resource.h> +#include <linux/highmem.h> +#include <linux/time.h> +#include <linux/times.h> +#include <linux/poll.h> +#include <linux/skbuff.h> +#include <linux/filter.h> +#include <linux/shm.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/icmpv6.h> +#include <linux/syscalls.h> +#include <linux/sysctl.h> +#include <linux/utime.h> +#include <linux/utsname.h> +#include <linux/personality.h> +#include <linux/dnotify.h> +#include <linux/binfmts.h> +#include <linux/security.h> +#include <linux/compat.h> +#include <linux/vfs.h> +#include <linux/ipc.h> +#include <linux/slab.h> + +#include <net/sock.h> +#include <net/scm.h> + +#include <asm/compat-signal.h> +#include <asm/sim.h> +#include <linux/uaccess.h> +#include <asm/mmu_context.h> +#include <asm/mman.h> + +#ifdef __MIPSEB__ +#define merge_64(r1, r2) ((((r1) & 0xffffffffUL) << 32) + ((r2) & 0xffffffffUL)) +#endif +#ifdef __MIPSEL__ +#define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL)) +#endif + +SYSCALL_DEFINE4(32_truncate64, const char __user *, path, + unsigned long, __dummy, unsigned long, a2, unsigned long, a3) +{ + return ksys_truncate(path, merge_64(a2, a3)); +} + +SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy, + unsigned long, a2, unsigned long, a3) +{ + return ksys_ftruncate(fd, merge_64(a2, a3)); +} + +SYSCALL_DEFINE5(32_llseek, unsigned int, fd, unsigned int, offset_high, + unsigned int, offset_low, loff_t __user *, result, + unsigned int, origin) +{ + return sys_llseek(fd, offset_high, offset_low, result, origin); +} + +/* From the Single Unix Spec: pread & pwrite act like lseek to pos + op + + lseek back to original location. They fail just like lseek does on + non-seekable files. */ + +SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count, + unsigned long, unused, unsigned long, a4, unsigned long, a5) +{ + return ksys_pread64(fd, buf, count, merge_64(a4, a5)); +} + +SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf, + size_t, count, u32, unused, u64, a4, u64, a5) +{ + return ksys_pwrite64(fd, buf, count, merge_64(a4, a5)); +} + +SYSCALL_DEFINE1(32_personality, unsigned long, personality) +{ + unsigned int p = personality & 0xffffffff; + int ret; + + if (personality(current->personality) == PER_LINUX32 && + personality(p) == PER_LINUX) + p = (p & ~PER_MASK) | PER_LINUX32; + ret = sys_personality(p); + if (ret != -1 && personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; + return ret; +} + +asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3, + size_t count) +{ + return ksys_readahead(fd, merge_64(a2, a3), count); +} + +asmlinkage long sys32_sync_file_range(int fd, int __pad, + unsigned long a2, unsigned long a3, + unsigned long a4, unsigned long a5, + int flags) +{ + return ksys_sync_file_range(fd, + merge_64(a2, a3), merge_64(a4, a5), + flags); +} + +asmlinkage long sys32_fadvise64_64(int fd, int __pad, + unsigned long a2, unsigned long a3, + unsigned long a4, unsigned long a5, + int flags) +{ + return ksys_fadvise64_64(fd, + merge_64(a2, a3), merge_64(a4, a5), + flags); +} + +asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_a2, + unsigned offset_a3, unsigned len_a4, unsigned len_a5) +{ + return ksys_fallocate(fd, mode, merge_64(offset_a2, offset_a3), + merge_64(len_a4, len_a5)); +} diff --git a/arch/mips/kernel/machine_kexec.c b/arch/mips/kernel/machine_kexec.c new file mode 100644 index 000000000..432bfd3e7 --- /dev/null +++ b/arch/mips/kernel/machine_kexec.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * machine_kexec.c for kexec + * Created by <nschichan@corp.free.fr> on Thu Oct 12 15:15:06 2006 + */ +#include <linux/compiler.h> +#include <linux/kexec.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/libfdt.h> + +#include <asm/cacheflush.h> +#include <asm/page.h> + +extern const unsigned char relocate_new_kernel[]; +extern const size_t relocate_new_kernel_size; + +extern unsigned long kexec_start_address; +extern unsigned long kexec_indirection_page; + +static unsigned long reboot_code_buffer; + +#ifdef CONFIG_SMP +static void (*relocated_kexec_smp_wait)(void *); + +atomic_t kexec_ready_to_reboot = ATOMIC_INIT(0); +void (*_crash_smp_send_stop)(void) = NULL; +#endif + +void (*_machine_kexec_shutdown)(void) = NULL; +void (*_machine_crash_shutdown)(struct pt_regs *regs) = NULL; + +static void kexec_image_info(const struct kimage *kimage) +{ + unsigned long i; + + pr_debug("kexec kimage info:\n"); + pr_debug(" type: %d\n", kimage->type); + pr_debug(" start: %lx\n", kimage->start); + pr_debug(" head: %lx\n", kimage->head); + pr_debug(" nr_segments: %lu\n", kimage->nr_segments); + + for (i = 0; i < kimage->nr_segments; i++) { + pr_debug(" segment[%lu]: %016lx - %016lx, 0x%lx bytes, %lu pages\n", + i, + kimage->segment[i].mem, + kimage->segment[i].mem + kimage->segment[i].memsz, + (unsigned long)kimage->segment[i].memsz, + (unsigned long)kimage->segment[i].memsz / PAGE_SIZE); + } +} + +#ifdef CONFIG_UHI_BOOT + +static int uhi_machine_kexec_prepare(struct kimage *kimage) +{ + int i; + + /* + * In case DTB file is not passed to the new kernel, a flat device + * tree will be created by kexec tool. It holds modified command + * line for the new kernel. + */ + for (i = 0; i < kimage->nr_segments; i++) { + struct fdt_header fdt; + + if (kimage->segment[i].memsz <= sizeof(fdt)) + continue; + + if (copy_from_user(&fdt, kimage->segment[i].buf, sizeof(fdt))) + continue; + + if (fdt_check_header(&fdt)) + continue; + + kexec_args[0] = -2; + kexec_args[1] = (unsigned long) + phys_to_virt((unsigned long)kimage->segment[i].mem); + break; + } + + return 0; +} + +int (*_machine_kexec_prepare)(struct kimage *) = uhi_machine_kexec_prepare; + +#else + +int (*_machine_kexec_prepare)(struct kimage *) = NULL; + +#endif /* CONFIG_UHI_BOOT */ + +int +machine_kexec_prepare(struct kimage *kimage) +{ +#ifdef CONFIG_SMP + if (!kexec_nonboot_cpu_func()) + return -EINVAL; +#endif + + kexec_image_info(kimage); + + if (_machine_kexec_prepare) + return _machine_kexec_prepare(kimage); + + return 0; +} + +void +machine_kexec_cleanup(struct kimage *kimage) +{ +} + +#ifdef CONFIG_SMP +static void kexec_shutdown_secondary(void *param) +{ + int cpu = smp_processor_id(); + + if (!cpu_online(cpu)) + return; + + /* We won't be sent IPIs any more. */ + set_cpu_online(cpu, false); + + local_irq_disable(); + while (!atomic_read(&kexec_ready_to_reboot)) + cpu_relax(); + + kexec_reboot(); + + /* NOTREACHED */ +} +#endif + +void +machine_shutdown(void) +{ + if (_machine_kexec_shutdown) + _machine_kexec_shutdown(); + +#ifdef CONFIG_SMP + smp_call_function(kexec_shutdown_secondary, NULL, 0); + + while (num_online_cpus() > 1) { + cpu_relax(); + mdelay(1); + } +#endif +} + +void +machine_crash_shutdown(struct pt_regs *regs) +{ + if (_machine_crash_shutdown) + _machine_crash_shutdown(regs); + else + default_machine_crash_shutdown(regs); +} + +#ifdef CONFIG_SMP +void kexec_nonboot_cpu_jump(void) +{ + local_flush_icache_range((unsigned long)relocated_kexec_smp_wait, + reboot_code_buffer + relocate_new_kernel_size); + + relocated_kexec_smp_wait(NULL); +} +#endif + +void kexec_reboot(void) +{ + void (*do_kexec)(void) __noreturn; + + /* + * We know we were online, and there will be no incoming IPIs at + * this point. Mark online again before rebooting so that the crash + * analysis tool will see us correctly. + */ + set_cpu_online(smp_processor_id(), true); + + /* Ensure remote CPUs observe that we're online before rebooting. */ + smp_mb__after_atomic(); + +#ifdef CONFIG_SMP + if (smp_processor_id() > 0) { + /* + * Instead of cpu_relax() or wait, this is needed for kexec + * smp reboot. Kdump usually doesn't require an smp new + * kernel, but kexec may do. + */ + kexec_nonboot_cpu(); + + /* NOTREACHED */ + } +#endif + + /* + * Make sure we get correct instructions written by the + * machine_kexec() CPU. + */ + local_flush_icache_range(reboot_code_buffer, + reboot_code_buffer + relocate_new_kernel_size); + + do_kexec = (void *)reboot_code_buffer; + do_kexec(); +} + +void +machine_kexec(struct kimage *image) +{ + unsigned long entry; + unsigned long *ptr; + + reboot_code_buffer = + (unsigned long)page_address(image->control_code_page); + + kexec_start_address = + (unsigned long) phys_to_virt(image->start); + + if (image->type == KEXEC_TYPE_DEFAULT) { + kexec_indirection_page = + (unsigned long) phys_to_virt(image->head & PAGE_MASK); + } else { + kexec_indirection_page = (unsigned long)&image->head; + } + + memcpy((void*)reboot_code_buffer, relocate_new_kernel, + relocate_new_kernel_size); + + /* + * The generic kexec code builds a page list with physical + * addresses. they are directly accessible through KSEG0 (or + * CKSEG0 or XPHYS if on 64bit system), hence the + * phys_to_virt() call. + */ + for (ptr = &image->head; (entry = *ptr) && !(entry &IND_DONE); + ptr = (entry & IND_INDIRECTION) ? + phys_to_virt(entry & PAGE_MASK) : ptr + 1) { + if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION || + *ptr & IND_DESTINATION) + *ptr = (unsigned long) phys_to_virt(*ptr); + } + + /* Mark offline BEFORE disabling local irq. */ + set_cpu_online(smp_processor_id(), false); + + /* + * we do not want to be bothered. + */ + local_irq_disable(); + + printk("Will call new kernel at %08lx\n", image->start); + printk("Bye ...\n"); + /* Make reboot code buffer available to the boot CPU. */ + __flush_cache_all(); +#ifdef CONFIG_SMP + /* All secondary cpus now may jump to kexec_wait cycle */ + relocated_kexec_smp_wait = reboot_code_buffer + + (void *)(kexec_smp_wait - relocate_new_kernel); + smp_wmb(); + atomic_set(&kexec_ready_to_reboot, 1); +#endif + kexec_reboot(); +} diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S new file mode 100644 index 000000000..cff52b283 --- /dev/null +++ b/arch/mips/kernel/mcount.S @@ -0,0 +1,220 @@ +/* + * MIPS specific _mcount support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + * + * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China + * Copyright (C) 2010 DSLab, Lanzhou University, China + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + */ + +#include <asm/export.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/ftrace.h> + + .text + .set noreorder + .set noat + + .macro MCOUNT_SAVE_REGS + PTR_SUBU sp, PT_SIZE + PTR_S ra, PT_R31(sp) + PTR_S AT, PT_R1(sp) + PTR_S a0, PT_R4(sp) + PTR_S a1, PT_R5(sp) + PTR_S a2, PT_R6(sp) + PTR_S a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_S a4, PT_R8(sp) + PTR_S a5, PT_R9(sp) + PTR_S a6, PT_R10(sp) + PTR_S a7, PT_R11(sp) +#endif + .endm + + .macro MCOUNT_RESTORE_REGS + PTR_L ra, PT_R31(sp) + PTR_L AT, PT_R1(sp) + PTR_L a0, PT_R4(sp) + PTR_L a1, PT_R5(sp) + PTR_L a2, PT_R6(sp) + PTR_L a3, PT_R7(sp) +#ifdef CONFIG_64BIT + PTR_L a4, PT_R8(sp) + PTR_L a5, PT_R9(sp) + PTR_L a6, PT_R10(sp) + PTR_L a7, PT_R11(sp) +#endif + PTR_ADDIU sp, PT_SIZE + .endm + + .macro RETURN_BACK + jr ra + move ra, AT + .endm + +/* + * The -mmcount-ra-address option of gcc 4.5 uses register $12 to pass + * the location of the parent's return address. + */ +#define MCOUNT_RA_ADDRESS_REG $12 + +#ifdef CONFIG_DYNAMIC_FTRACE + +NESTED(ftrace_caller, PT_SIZE, ra) + .globl _mcount +_mcount: +EXPORT_SYMBOL(_mcount) + b ftrace_stub +#ifdef CONFIG_32BIT + addiu sp,sp,8 +#else + nop +#endif + + /* When tracing is activated, it calls ftrace_caller+8 (aka here) */ + MCOUNT_SAVE_REGS +#ifdef KBUILD_MCOUNT_RA_ADDRESS + PTR_S MCOUNT_RA_ADDRESS_REG, PT_R12(sp) +#endif + + PTR_SUBU a0, ra, 8 /* arg1: self address */ + PTR_LA t1, _stext + sltu t2, a0, t1 /* t2 = (a0 < _stext) */ + PTR_LA t1, _etext + sltu t3, t1, a0 /* t3 = (a0 > _etext) */ + or t1, t2, t3 + beqz t1, ftrace_call + nop +#if defined(KBUILD_MCOUNT_RA_ADDRESS) && defined(CONFIG_32BIT) + PTR_SUBU a0, a0, 16 /* arg1: adjust to module's recorded callsite */ +#else + PTR_SUBU a0, a0, 12 +#endif + + .globl ftrace_call +ftrace_call: + nop /* a placeholder for the call to a real tracing function */ + move a1, AT /* arg2: parent's return address */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_call +ftrace_graph_call: + nop + nop +#endif + + MCOUNT_RESTORE_REGS + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + +NESTED(_mcount, PT_SIZE, ra) +EXPORT_SYMBOL(_mcount) + PTR_LA t1, ftrace_stub + PTR_L t2, ftrace_trace_function /* Prepare t2 for (1) */ + beq t1, t2, fgraph_trace + nop + + MCOUNT_SAVE_REGS + + move a0, ra /* arg1: self return address */ + jalr t2 /* (1) call *ftrace_trace_function */ + move a1, AT /* arg2: parent's return address */ + + MCOUNT_RESTORE_REGS + +fgraph_trace: +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + PTR_LA t1, ftrace_stub + PTR_L t3, ftrace_graph_return + bne t1, t3, ftrace_graph_caller + nop + PTR_LA t1, ftrace_graph_entry_stub + PTR_L t3, ftrace_graph_entry + bne t1, t3, ftrace_graph_caller + nop +#endif + +#ifdef CONFIG_32BIT + addiu sp, sp, 8 +#endif + + .globl ftrace_stub +ftrace_stub: + RETURN_BACK + END(_mcount) + +#endif /* ! CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + +NESTED(ftrace_graph_caller, PT_SIZE, ra) +#ifndef CONFIG_DYNAMIC_FTRACE + MCOUNT_SAVE_REGS +#endif + + /* arg1: Get the location of the parent's return address */ +#ifdef KBUILD_MCOUNT_RA_ADDRESS +#ifdef CONFIG_DYNAMIC_FTRACE + PTR_L a0, PT_R12(sp) +#else + move a0, MCOUNT_RA_ADDRESS_REG +#endif + bnez a0, 1f /* non-leaf func: stored in MCOUNT_RA_ADDRESS_REG */ + nop +#endif + PTR_LA a0, PT_R1(sp) /* leaf func: the location in current stack */ +1: + + /* arg2: Get self return address */ +#ifdef CONFIG_DYNAMIC_FTRACE + PTR_L a1, PT_R31(sp) +#else + move a1, ra +#endif + + /* arg3: Get frame pointer of current stack */ +#ifdef CONFIG_64BIT + PTR_LA a2, PT_SIZE(sp) +#else + PTR_LA a2, (PT_SIZE+8)(sp) +#endif + + jal prepare_ftrace_return + nop + MCOUNT_RESTORE_REGS +#ifndef CONFIG_DYNAMIC_FTRACE +#ifdef CONFIG_32BIT + addiu sp, sp, 8 +#endif +#endif + RETURN_BACK + END(ftrace_graph_caller) + + .align 2 + .globl return_to_handler +return_to_handler: + PTR_SUBU sp, PT_SIZE + PTR_S v0, PT_R2(sp) + + jal ftrace_return_to_handler + PTR_S v1, PT_R3(sp) + + /* restore the real parent address: v0 -> ra */ + move ra, v0 + + PTR_L v0, PT_R2(sp) + PTR_L v1, PT_R3(sp) + jr ra + PTR_ADDIU sp, PT_SIZE +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + + .set at + .set reorder diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c new file mode 100644 index 000000000..72c8374a3 --- /dev/null +++ b/arch/mips/kernel/mips-cm.c @@ -0,0 +1,514 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <linux/errno.h> +#include <linux/percpu.h> +#include <linux/spinlock.h> + +#include <asm/mips-cps.h> +#include <asm/mipsregs.h> + +void __iomem *mips_gcr_base; +void __iomem *mips_cm_l2sync_base; +int mips_cm_is64; + +static char *cm2_tr[8] = { + "mem", "gcr", "gic", "mmio", + "0x04", "cpc", "0x06", "0x07" +}; + +/* CM3 Tag ECC transaction type */ +static char *cm3_tr[16] = { + [0x0] = "ReqNoData", + [0x1] = "0x1", + [0x2] = "ReqWData", + [0x3] = "0x3", + [0x4] = "IReqNoResp", + [0x5] = "IReqWResp", + [0x6] = "IReqNoRespDat", + [0x7] = "IReqWRespDat", + [0x8] = "RespNoData", + [0x9] = "RespDataFol", + [0xa] = "RespWData", + [0xb] = "RespDataOnly", + [0xc] = "IRespNoData", + [0xd] = "IRespDataFol", + [0xe] = "IRespWData", + [0xf] = "IRespDataOnly" +}; + +static char *cm2_cmd[32] = { + [0x00] = "0x00", + [0x01] = "Legacy Write", + [0x02] = "Legacy Read", + [0x03] = "0x03", + [0x04] = "0x04", + [0x05] = "0x05", + [0x06] = "0x06", + [0x07] = "0x07", + [0x08] = "Coherent Read Own", + [0x09] = "Coherent Read Share", + [0x0a] = "Coherent Read Discard", + [0x0b] = "Coherent Ready Share Always", + [0x0c] = "Coherent Upgrade", + [0x0d] = "Coherent Writeback", + [0x0e] = "0x0e", + [0x0f] = "0x0f", + [0x10] = "Coherent Copyback", + [0x11] = "Coherent Copyback Invalidate", + [0x12] = "Coherent Invalidate", + [0x13] = "Coherent Write Invalidate", + [0x14] = "Coherent Completion Sync", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "0x18", + [0x19] = "0x19", + [0x1a] = "0x1a", + [0x1b] = "0x1b", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +/* CM3 Tag ECC command type */ +static char *cm3_cmd[16] = { + [0x0] = "Legacy Read", + [0x1] = "Legacy Write", + [0x2] = "Coherent Read Own", + [0x3] = "Coherent Read Share", + [0x4] = "Coherent Read Discard", + [0x5] = "Coherent Evicted", + [0x6] = "Coherent Upgrade", + [0x7] = "Coherent Upgrade for Store Conditional", + [0x8] = "Coherent Writeback", + [0x9] = "Coherent Write Invalidate", + [0xa] = "0xa", + [0xb] = "0xb", + [0xc] = "0xc", + [0xd] = "0xd", + [0xe] = "0xe", + [0xf] = "0xf" +}; + +/* CM3 Tag ECC command group */ +static char *cm3_cmd_group[8] = { + [0x0] = "Normal", + [0x1] = "Registers", + [0x2] = "TLB", + [0x3] = "0x3", + [0x4] = "L1I", + [0x5] = "L1D", + [0x6] = "L3", + [0x7] = "L2" +}; + +static char *cm2_core[8] = { + "Invalid/OK", "Invalid/Data", + "Shared/OK", "Shared/Data", + "Modified/OK", "Modified/Data", + "Exclusive/OK", "Exclusive/Data" +}; + +static char *cm2_l2_type[4] = { + [0x0] = "None", + [0x1] = "Tag RAM single/double ECC error", + [0x2] = "Data RAM single/double ECC error", + [0x3] = "WS RAM uncorrectable dirty parity" +}; + +static char *cm2_l2_instr[32] = { + [0x00] = "L2_NOP", + [0x01] = "L2_ERR_CORR", + [0x02] = "L2_TAG_INV", + [0x03] = "L2_WS_CLEAN", + [0x04] = "L2_RD_MDYFY_WR", + [0x05] = "L2_WS_MRU", + [0x06] = "L2_EVICT_LN2", + [0x07] = "0x07", + [0x08] = "L2_EVICT", + [0x09] = "L2_REFL", + [0x0a] = "L2_RD", + [0x0b] = "L2_WR", + [0x0c] = "L2_EVICT_MRU", + [0x0d] = "L2_SYNC", + [0x0e] = "L2_REFL_ERR", + [0x0f] = "0x0f", + [0x10] = "L2_INDX_WB_INV", + [0x11] = "L2_INDX_LD_TAG", + [0x12] = "L2_INDX_ST_TAG", + [0x13] = "L2_INDX_ST_DATA", + [0x14] = "L2_INDX_ST_ECC", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "L2_FTCH_AND_LCK", + [0x19] = "L2_HIT_INV", + [0x1a] = "L2_HIT_WB_INV", + [0x1b] = "L2_HIT_WB", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +static char *cm2_causes[32] = { + "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", + "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", + "0x08", "0x09", "0x0a", "0x0b", + "0x0c", "0x0d", "0x0e", "0x0f", + "0x10", "INTVN_WR_ERR", "INTVN_RD_ERR", "0x13", + "0x14", "0x15", "0x16", "0x17", + "L2_RD_UNCORR", "L2_WR_UNCORR", "L2_CORR", "0x1b", + "0x1c", "0x1d", "0x1e", "0x1f" +}; + +static char *cm3_causes[32] = { + "0x0", "MP_CORRECTABLE_ECC_ERR", "MP_REQUEST_DECODE_ERR", + "MP_UNCORRECTABLE_ECC_ERR", "MP_PARITY_ERR", "MP_COHERENCE_ERR", + "CMBIU_REQUEST_DECODE_ERR", "CMBIU_PARITY_ERR", "CMBIU_AXI_RESP_ERR", + "0x9", "RBI_BUS_ERR", "0xb", "0xc", "0xd", "0xe", "0xf", "0x10", + "0x11", "0x12", "0x13", "0x14", "0x15", "0x16", "0x17", "0x18", + "0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f" +}; + +static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock); +static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags); + +phys_addr_t __mips_cm_phys_base(void) +{ + u32 config3 = read_c0_config3(); + unsigned long cmgcr; + + /* Check the CMGCRBase register is implemented */ + if (!(config3 & MIPS_CONF3_CMGCR)) + return 0; + + /* Read the address from CMGCRBase */ + cmgcr = read_c0_cmgcrbase(); + return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32); +} + +phys_addr_t mips_cm_phys_base(void) + __attribute__((weak, alias("__mips_cm_phys_base"))); + +phys_addr_t __mips_cm_l2sync_phys_base(void) +{ + u32 base_reg; + + /* + * If the L2-only sync region is already enabled then leave it at it's + * current location. + */ + base_reg = read_gcr_l2_only_sync_base(); + if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN) + return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE; + + /* Default to following the CM */ + return mips_cm_phys_base() + MIPS_CM_GCR_SIZE; +} + +phys_addr_t mips_cm_l2sync_phys_base(void) + __attribute__((weak, alias("__mips_cm_l2sync_phys_base"))); + +static void mips_cm_probe_l2sync(void) +{ + unsigned major_rev; + phys_addr_t addr; + + /* L2-only sync was introduced with CM major revision 6 */ + major_rev = FIELD_GET(CM_GCR_REV_MAJOR, read_gcr_rev()); + if (major_rev < 6) + return; + + /* Find a location for the L2 sync region */ + addr = mips_cm_l2sync_phys_base(); + BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE) != addr); + if (!addr) + return; + + /* Set the region base address & enable it */ + write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN); + + /* Map the region */ + mips_cm_l2sync_base = ioremap(addr, MIPS_CM_L2SYNC_SIZE); +} + +int mips_cm_probe(void) +{ + phys_addr_t addr; + u32 base_reg; + unsigned cpu; + + /* + * No need to probe again if we have already been + * here before. + */ + if (mips_gcr_base) + return 0; + + addr = mips_cm_phys_base(); + BUG_ON((addr & CM_GCR_BASE_GCRBASE) != addr); + if (!addr) + return -ENODEV; + + mips_gcr_base = ioremap(addr, MIPS_CM_GCR_SIZE); + if (!mips_gcr_base) + return -ENXIO; + + /* sanity check that we're looking at a CM */ + base_reg = read_gcr_base(); + if ((base_reg & CM_GCR_BASE_GCRBASE) != addr) { + pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n", + (unsigned long)addr); + mips_gcr_base = NULL; + return -ENODEV; + } + + /* set default target to memory */ + change_gcr_base(CM_GCR_BASE_CMDEFTGT, CM_GCR_BASE_CMDEFTGT_MEM); + + /* disable CM regions */ + write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK); + + /* probe for an L2-only sync region */ + mips_cm_probe_l2sync(); + + /* determine register width for this CM */ + mips_cm_is64 = IS_ENABLED(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3); + + for_each_possible_cpu(cpu) + spin_lock_init(&per_cpu(cm_core_lock, cpu)); + + return 0; +} + +void mips_cm_lock_other(unsigned int cluster, unsigned int core, + unsigned int vp, unsigned int block) +{ + unsigned int curr_core, cm_rev; + u32 val; + + cm_rev = mips_cm_revision(); + preempt_disable(); + + if (cm_rev >= CM_REV_CM3) { + val = FIELD_PREP(CM3_GCR_Cx_OTHER_CORE, core) | + FIELD_PREP(CM3_GCR_Cx_OTHER_VP, vp); + + if (cm_rev >= CM_REV_CM3_5) { + val |= CM_GCR_Cx_OTHER_CLUSTER_EN; + val |= FIELD_PREP(CM_GCR_Cx_OTHER_CLUSTER, cluster); + val |= FIELD_PREP(CM_GCR_Cx_OTHER_BLOCK, block); + } else { + WARN_ON(cluster != 0); + WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL); + } + + /* + * We need to disable interrupts in SMP systems in order to + * ensure that we don't interrupt the caller with code which + * may modify the redirect register. We do so here in a + * slightly obscure way by using a spin lock, since this has + * the neat property of also catching any nested uses of + * mips_cm_lock_other() leading to a deadlock or a nice warning + * with lockdep enabled. + */ + spin_lock_irqsave(this_cpu_ptr(&cm_core_lock), + *this_cpu_ptr(&cm_core_lock_flags)); + } else { + WARN_ON(cluster != 0); + WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL); + + /* + * We only have a GCR_CL_OTHER per core in systems with + * CM 2.5 & older, so have to ensure other VP(E)s don't + * race with us. + */ + curr_core = cpu_core(¤t_cpu_data); + spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core), + per_cpu(cm_core_lock_flags, curr_core)); + + val = FIELD_PREP(CM_GCR_Cx_OTHER_CORENUM, core); + } + + write_gcr_cl_other(val); + + /* + * Ensure the core-other region reflects the appropriate core & + * VP before any accesses to it occur. + */ + mb(); +} + +void mips_cm_unlock_other(void) +{ + unsigned int curr_core; + + if (mips_cm_revision() < CM_REV_CM3) { + curr_core = cpu_core(¤t_cpu_data); + spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core), + per_cpu(cm_core_lock_flags, curr_core)); + } else { + spin_unlock_irqrestore(this_cpu_ptr(&cm_core_lock), + *this_cpu_ptr(&cm_core_lock_flags)); + } + + preempt_enable(); +} + +void mips_cm_error_report(void) +{ + u64 cm_error, cm_addr, cm_other; + unsigned long revision; + int ocause, cause; + char buf[256]; + + if (!mips_cm_present()) + return; + + revision = mips_cm_revision(); + cm_error = read_gcr_error_cause(); + cm_addr = read_gcr_error_addr(); + cm_other = read_gcr_error_mult(); + + if (revision < CM_REV_CM3) { /* CM2 */ + cause = FIELD_GET(CM_GCR_ERROR_CAUSE_ERRTYPE, cm_error); + ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other); + + if (!cause) + return; + + if (cause < 16) { + unsigned long cca_bits = (cm_error >> 15) & 7; + unsigned long tr_bits = (cm_error >> 12) & 7; + unsigned long cmd_bits = (cm_error >> 7) & 0x1f; + unsigned long stag_bits = (cm_error >> 3) & 15; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "CCA=%lu TR=%s MCmd=%s STag=%lu " + "SPort=%lu\n", cca_bits, cm2_tr[tr_bits], + cm2_cmd[cmd_bits], stag_bits, sport_bits); + } else if (cause < 24) { + /* glob state & sresp together */ + unsigned long c3_bits = (cm_error >> 18) & 7; + unsigned long c2_bits = (cm_error >> 15) & 7; + unsigned long c1_bits = (cm_error >> 12) & 7; + unsigned long c0_bits = (cm_error >> 9) & 7; + unsigned long sc_bit = (cm_error >> 8) & 1; + unsigned long cmd_bits = (cm_error >> 3) & 0x1f; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "C3=%s C2=%s C1=%s C0=%s SC=%s " + "MCmd=%s SPort=%lu\n", + cm2_core[c3_bits], cm2_core[c2_bits], + cm2_core[c1_bits], cm2_core[c0_bits], + sc_bit ? "True" : "False", + cm2_cmd[cmd_bits], sport_bits); + } else { + unsigned long muc_bit = (cm_error >> 23) & 1; + unsigned long ins_bits = (cm_error >> 18) & 0x1f; + unsigned long arr_bits = (cm_error >> 16) & 3; + unsigned long dw_bits = (cm_error >> 12) & 15; + unsigned long way_bits = (cm_error >> 9) & 7; + unsigned long mway_bit = (cm_error >> 8) & 1; + unsigned long syn_bits = (cm_error >> 0) & 0xFF; + + snprintf(buf, sizeof(buf), + "Type=%s%s Instr=%s DW=%lu Way=%lu " + "MWay=%s Syndrome=0x%02lx", + muc_bit ? "Multi-UC " : "", + cm2_l2_type[arr_bits], + cm2_l2_instr[ins_bits], dw_bits, way_bits, + mway_bit ? "True" : "False", syn_bits); + } + pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, + cm2_causes[cause], buf); + pr_err("CM_ADDR =%08llx\n", cm_addr); + pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]); + } else { /* CM3 */ + ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits; + ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit; + + cause = FIELD_GET(CM3_GCR_ERROR_CAUSE_ERRTYPE, cm_error); + ocause = FIELD_GET(CM_GCR_ERROR_MULT_ERR2ND, cm_other); + + if (!cause) + return; + + /* Used by cause == {1,2,3} */ + core_id_bits = (cm_error >> 22) & 0xf; + vp_id_bits = (cm_error >> 18) & 0xf; + cmd_bits = (cm_error >> 14) & 0xf; + cmd_group_bits = (cm_error >> 11) & 0xf; + cm3_cca_bits = (cm_error >> 8) & 7; + mcp_bits = (cm_error >> 5) & 0xf; + cm3_tr_bits = (cm_error >> 1) & 0xf; + sched_bit = cm_error & 0x1; + + if (cause == 1 || cause == 3) { /* Tag ECC */ + unsigned long tag_ecc = (cm_error >> 57) & 0x1; + unsigned long tag_way_bits = (cm_error >> 29) & 0xffff; + unsigned long dword_bits = (cm_error >> 49) & 0xff; + unsigned long data_way_bits = (cm_error >> 45) & 0xf; + unsigned long data_sets_bits = (cm_error >> 29) & 0xfff; + unsigned long bank_bit = (cm_error >> 28) & 0x1; + snprintf(buf, sizeof(buf), + "%s ECC Error: Way=%lu (DWORD=%lu, Sets=%lu)" + "Bank=%lu CoreID=%lu VPID=%lu Command=%s" + "Command Group=%s CCA=%lu MCP=%d" + "Transaction type=%s Scheduler=%lu\n", + tag_ecc ? "TAG" : "DATA", + tag_ecc ? (unsigned long)ffs(tag_way_bits) - 1 : + data_way_bits, bank_bit, dword_bits, + data_sets_bits, + core_id_bits, vp_id_bits, + cm3_cmd[cmd_bits], + cm3_cmd_group[cmd_group_bits], + cm3_cca_bits, 1 << mcp_bits, + cm3_tr[cm3_tr_bits], sched_bit); + } else if (cause == 2) { + unsigned long data_error_type = (cm_error >> 41) & 0xfff; + unsigned long data_decode_cmd = (cm_error >> 37) & 0xf; + unsigned long data_decode_group = (cm_error >> 34) & 0x7; + unsigned long data_decode_destination_id = (cm_error >> 28) & 0x3f; + + snprintf(buf, sizeof(buf), + "Decode Request Error: Type=%lu, Command=%lu" + "Command Group=%lu Destination ID=%lu" + "CoreID=%lu VPID=%lu Command=%s" + "Command Group=%s CCA=%lu MCP=%d" + "Transaction type=%s Scheduler=%lu\n", + data_error_type, data_decode_cmd, + data_decode_group, data_decode_destination_id, + core_id_bits, vp_id_bits, + cm3_cmd[cmd_bits], + cm3_cmd_group[cmd_group_bits], + cm3_cca_bits, 1 << mcp_bits, + cm3_tr[cm3_tr_bits], sched_bit); + } else { + buf[0] = 0; + } + + pr_err("CM_ERROR=%llx %s <%s>\n", cm_error, + cm3_causes[cause], buf); + pr_err("CM_ADDR =%llx\n", cm_addr); + pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]); + } + + /* reprime cause register */ + write_gcr_error_cause(cm_error); +} diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c new file mode 100644 index 000000000..d005be84c --- /dev/null +++ b/arch/mips/kernel/mips-cpc.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <linux/errno.h> +#include <linux/percpu.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +#include <asm/mips-cps.h> + +void __iomem *mips_cpc_base; + +static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock); + +static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags); + +phys_addr_t __weak mips_cpc_default_phys_base(void) +{ + struct device_node *cpc_node; + struct resource res; + int err; + + cpc_node = of_find_compatible_node(of_root, NULL, "mti,mips-cpc"); + if (cpc_node) { + err = of_address_to_resource(cpc_node, 0, &res); + of_node_put(cpc_node); + if (!err) + return res.start; + } + + return 0; +} + +/** + * mips_cpc_phys_base - retrieve the physical base address of the CPC + * + * This function returns the physical base address of the Cluster Power + * Controller memory mapped registers, or 0 if no Cluster Power Controller + * is present. + */ +static phys_addr_t mips_cpc_phys_base(void) +{ + unsigned long cpc_base; + + if (!mips_cm_present()) + return 0; + + if (!(read_gcr_cpc_status() & CM_GCR_CPC_STATUS_EX)) + return 0; + + /* If the CPC is already enabled, leave it so */ + cpc_base = read_gcr_cpc_base(); + if (cpc_base & CM_GCR_CPC_BASE_CPCEN) + return cpc_base & CM_GCR_CPC_BASE_CPCBASE; + + /* Otherwise, use the default address */ + cpc_base = mips_cpc_default_phys_base(); + if (!cpc_base) + return cpc_base; + + /* Enable the CPC, mapped at the default address */ + write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN); + return cpc_base; +} + +int mips_cpc_probe(void) +{ + phys_addr_t addr; + unsigned int cpu; + + for_each_possible_cpu(cpu) + spin_lock_init(&per_cpu(cpc_core_lock, cpu)); + + addr = mips_cpc_phys_base(); + if (!addr) + return -ENODEV; + + mips_cpc_base = ioremap(addr, 0x8000); + if (!mips_cpc_base) + return -ENXIO; + + return 0; +} + +void mips_cpc_lock_other(unsigned int core) +{ + unsigned int curr_core; + + if (mips_cm_revision() >= CM_REV_CM3) + /* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */ + return; + + preempt_disable(); + curr_core = cpu_core(¤t_cpu_data); + spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core), + per_cpu(cpc_core_lock_flags, curr_core)); + write_cpc_cl_other(core << __ffs(CPC_Cx_OTHER_CORENUM)); + + /* + * Ensure the core-other region reflects the appropriate core & + * VP before any accesses to it occur. + */ + mb(); +} + +void mips_cpc_unlock_other(void) +{ + unsigned int curr_core; + + if (mips_cm_revision() >= CM_REV_CM3) + /* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */ + return; + + curr_core = cpu_core(¤t_cpu_data); + spin_unlock_irqrestore(&per_cpu(cpc_core_lock, curr_core), + per_cpu(cpc_core_lock_flags, curr_core)); + preempt_enable(); +} diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c new file mode 100644 index 000000000..6c590ef27 --- /dev/null +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * General MIPS MT support routines, usable in AP/SP and SMVP. + * Copyright (C) 2005 Mips Technologies, Inc + */ +#include <linux/cpu.h> +#include <linux/cpuset.h> +#include <linux/cpumask.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/sched/task.h> +#include <linux/cred.h> +#include <linux/security.h> +#include <linux/types.h> +#include <linux/uaccess.h> + +/* + * CPU mask used to set process affinity for MT VPEs/TCs with FPUs + */ +cpumask_t mt_fpu_cpumask; + +static int fpaff_threshold = -1; +unsigned long mt_fpemul_threshold; + +/* + * Replacement functions for the sys_sched_setaffinity() and + * sys_sched_getaffinity() system calls, so that we can integrate + * FPU affinity with the user's requested processor affinity. + * This code is 98% identical with the sys_sched_setaffinity() + * and sys_sched_getaffinity() system calls, and should be + * updated when kernel/sched/core.c changes. + */ + +/* + * find_process_by_pid - find a process with a matching PID value. + * used in sys_sched_set/getaffinity() in kernel/sched/core.c, so + * cloned here. + */ +static inline struct task_struct *find_process_by_pid(pid_t pid) +{ + return pid ? find_task_by_vpid(pid) : current; +} + +/* + * check the target process has a UID that matches the current process's + */ +static bool check_same_owner(struct task_struct *p) +{ + const struct cred *cred = current_cred(), *pcred; + bool match; + + rcu_read_lock(); + pcred = __task_cred(p); + match = (uid_eq(cred->euid, pcred->euid) || + uid_eq(cred->euid, pcred->uid)); + rcu_read_unlock(); + return match; +} + +/* + * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + cpumask_var_t cpus_allowed, new_mask, effective_mask; + struct thread_info *ti; + struct task_struct *p; + int retval; + + if (len < sizeof(new_mask)) + return -EINVAL; + + if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask))) + return -EFAULT; + + get_online_cpus(); + rcu_read_lock(); + + p = find_process_by_pid(pid); + if (!p) { + rcu_read_unlock(); + put_online_cpus(); + return -ESRCH; + } + + /* Prevent p going away */ + get_task_struct(p); + rcu_read_unlock(); + + if (!alloc_cpumask_var(&cpus_allowed, GFP_KERNEL)) { + retval = -ENOMEM; + goto out_put_task; + } + if (!alloc_cpumask_var(&new_mask, GFP_KERNEL)) { + retval = -ENOMEM; + goto out_free_cpus_allowed; + } + if (!alloc_cpumask_var(&effective_mask, GFP_KERNEL)) { + retval = -ENOMEM; + goto out_free_new_mask; + } + if (!check_same_owner(p) && !capable(CAP_SYS_NICE)) { + retval = -EPERM; + goto out_unlock; + } + + retval = security_task_setscheduler(p); + if (retval) + goto out_unlock; + + /* Record new user-specified CPU set for future reference */ + cpumask_copy(&p->thread.user_cpus_allowed, new_mask); + + again: + /* Compute new global allowed CPU set if necessary */ + ti = task_thread_info(p); + if (test_ti_thread_flag(ti, TIF_FPUBOUND) && + cpumask_intersects(new_mask, &mt_fpu_cpumask)) { + cpumask_and(effective_mask, new_mask, &mt_fpu_cpumask); + retval = set_cpus_allowed_ptr(p, effective_mask); + } else { + cpumask_copy(effective_mask, new_mask); + clear_ti_thread_flag(ti, TIF_FPUBOUND); + retval = set_cpus_allowed_ptr(p, new_mask); + } + + if (!retval) { + cpuset_cpus_allowed(p, cpus_allowed); + if (!cpumask_subset(effective_mask, cpus_allowed)) { + /* + * We must have raced with a concurrent cpuset + * update. Just reset the cpus_allowed to the + * cpuset's cpus_allowed + */ + cpumask_copy(new_mask, cpus_allowed); + goto again; + } + } +out_unlock: + free_cpumask_var(effective_mask); +out_free_new_mask: + free_cpumask_var(new_mask); +out_free_cpus_allowed: + free_cpumask_var(cpus_allowed); +out_put_task: + put_task_struct(p); + put_online_cpus(); + return retval; +} + +/* + * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process + */ +asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, + unsigned long __user *user_mask_ptr) +{ + unsigned int real_len; + cpumask_t allowed, mask; + int retval; + struct task_struct *p; + + real_len = sizeof(mask); + if (len < real_len) + return -EINVAL; + + get_online_cpus(); + rcu_read_lock(); + + retval = -ESRCH; + p = find_process_by_pid(pid); + if (!p) + goto out_unlock; + retval = security_task_getscheduler(p); + if (retval) + goto out_unlock; + + cpumask_or(&allowed, &p->thread.user_cpus_allowed, p->cpus_ptr); + cpumask_and(&mask, &allowed, cpu_active_mask); + +out_unlock: + rcu_read_unlock(); + put_online_cpus(); + if (retval) + return retval; + if (copy_to_user(user_mask_ptr, &mask, real_len)) + return -EFAULT; + return real_len; +} + + +static int __init fpaff_thresh(char *str) +{ + get_option(&str, &fpaff_threshold); + return 1; +} +__setup("fpaff=", fpaff_thresh); + +/* + * FPU Use Factor empirically derived from experiments on 34K + */ +#define FPUSEFACTOR 2000 + +static __init int mt_fp_affinity_init(void) +{ + if (fpaff_threshold >= 0) { + mt_fpemul_threshold = fpaff_threshold; + } else { + mt_fpemul_threshold = + (FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ; + } + printk(KERN_DEBUG "FPU Affinity set after %ld emulations\n", + mt_fpemul_threshold); + + return 0; +} +arch_initcall(mt_fp_affinity_init); diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c new file mode 100644 index 000000000..d5f7362e8 --- /dev/null +++ b/arch/mips/kernel/mips-mt.c @@ -0,0 +1,246 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * General MIPS MT support routines, usable in AP/SP and SMVP. + * Copyright (C) 2005 Mips Technologies, Inc + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/security.h> + +#include <asm/cpu.h> +#include <asm/processor.h> +#include <linux/atomic.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/mipsmtregs.h> +#include <asm/r4kcache.h> +#include <asm/cacheflush.h> + +int vpelimit; + +static int __init maxvpes(char *str) +{ + get_option(&str, &vpelimit); + + return 1; +} + +__setup("maxvpes=", maxvpes); + +int tclimit; + +static int __init maxtcs(char *str) +{ + get_option(&str, &tclimit); + + return 1; +} + +__setup("maxtcs=", maxtcs); + +/* + * Dump new MIPS MT state for the core. Does not leave TCs halted. + * Takes an argument which taken to be a pre-call MVPControl value. + */ + +void mips_mt_regdump(unsigned long mvpctl) +{ + unsigned long flags; + unsigned long vpflags; + unsigned long mvpconf0; + int nvpe; + int ntc; + int i; + int tc; + unsigned long haltval; + unsigned long tcstatval; + + local_irq_save(flags); + vpflags = dvpe(); + printk("=== MIPS MT State Dump ===\n"); + printk("-- Global State --\n"); + printk(" MVPControl Passed: %08lx\n", mvpctl); + printk(" MVPControl Read: %08lx\n", vpflags); + printk(" MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0())); + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1; + printk("-- per-VPE State --\n"); + for (i = 0; i < nvpe; i++) { + for (tc = 0; tc < ntc; tc++) { + settc(tc); + if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) { + printk(" VPE %d\n", i); + printk(" VPEControl : %08lx\n", + read_vpe_c0_vpecontrol()); + printk(" VPEConf0 : %08lx\n", + read_vpe_c0_vpeconf0()); + printk(" VPE%d.Status : %08lx\n", + i, read_vpe_c0_status()); + printk(" VPE%d.EPC : %08lx %pS\n", + i, read_vpe_c0_epc(), + (void *) read_vpe_c0_epc()); + printk(" VPE%d.Cause : %08lx\n", + i, read_vpe_c0_cause()); + printk(" VPE%d.Config7 : %08lx\n", + i, read_vpe_c0_config7()); + break; /* Next VPE */ + } + } + } + printk("-- per-TC State --\n"); + for (tc = 0; tc < ntc; tc++) { + settc(tc); + if (read_tc_c0_tcbind() == read_c0_tcbind()) { + /* Are we dumping ourself? */ + haltval = 0; /* Then we're not halted, and mustn't be */ + tcstatval = flags; /* And pre-dump TCStatus is flags */ + printk(" TC %d (current TC with VPE EPC above)\n", tc); + } else { + haltval = read_tc_c0_tchalt(); + write_tc_c0_tchalt(1); + tcstatval = read_tc_c0_tcstatus(); + printk(" TC %d\n", tc); + } + printk(" TCStatus : %08lx\n", tcstatval); + printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); + printk(" TCRestart : %08lx %pS\n", + read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart()); + printk(" TCHalt : %08lx\n", haltval); + printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); + if (!haltval) + write_tc_c0_tchalt(0); + } + printk("===========================\n"); + evpe(vpflags); + local_irq_restore(flags); +} + +static int mt_opt_rpsctl = -1; +static int mt_opt_nblsu = -1; +static int mt_opt_forceconfig7; +static int mt_opt_config7 = -1; + +static int __init rpsctl_set(char *str) +{ + get_option(&str, &mt_opt_rpsctl); + return 1; +} +__setup("rpsctl=", rpsctl_set); + +static int __init nblsu_set(char *str) +{ + get_option(&str, &mt_opt_nblsu); + return 1; +} +__setup("nblsu=", nblsu_set); + +static int __init config7_set(char *str) +{ + get_option(&str, &mt_opt_config7); + mt_opt_forceconfig7 = 1; + return 1; +} +__setup("config7=", config7_set); + +static unsigned int itc_base; + +static int __init set_itc_base(char *str) +{ + get_option(&str, &itc_base); + return 1; +} + +__setup("itcbase=", set_itc_base); + +void mips_mt_set_cpuoptions(void) +{ + unsigned int oconfig7 = read_c0_config7(); + unsigned int nconfig7 = oconfig7; + + if (mt_opt_rpsctl >= 0) { + printk("34K return prediction stack override set to %d.\n", + mt_opt_rpsctl); + if (mt_opt_rpsctl) + nconfig7 |= (1 << 2); + else + nconfig7 &= ~(1 << 2); + } + if (mt_opt_nblsu >= 0) { + printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu); + if (mt_opt_nblsu) + nconfig7 |= (1 << 5); + else + nconfig7 &= ~(1 << 5); + } + if (mt_opt_forceconfig7) { + printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7); + nconfig7 = mt_opt_config7; + } + if (oconfig7 != nconfig7) { + __asm__ __volatile("sync"); + write_c0_config7(nconfig7); + ehb(); + printk("Config7: 0x%08x\n", read_c0_config7()); + } + + if (itc_base != 0) { + /* + * Configure ITC mapping. This code is very + * specific to the 34K core family, which uses + * a special mode bit ("ITC") in the ErrCtl + * register to enable access to ITC control + * registers via cache "tag" operations. + */ + unsigned long ectlval; + unsigned long itcblkgrn; + + /* ErrCtl register is known as "ecc" to Linux */ + ectlval = read_c0_ecc(); + write_c0_ecc(ectlval | (0x1 << 26)); + ehb(); +#define INDEX_0 (0x80000000) +#define INDEX_8 (0x80000008) + /* Read "cache tag" for Dcache pseudo-index 8 */ + cache_op(Index_Load_Tag_D, INDEX_8); + ehb(); + itcblkgrn = read_c0_dtaglo(); + itcblkgrn &= 0xfffe0000; + /* Set for 128 byte pitch of ITC cells */ + itcblkgrn |= 0x00000c00; + /* Stage in Tag register */ + write_c0_dtaglo(itcblkgrn); + ehb(); + /* Write out to ITU with CACHE op */ + cache_op(Index_Store_Tag_D, INDEX_8); + /* Now set base address, and turn ITC on with 0x1 bit */ + write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 ); + ehb(); + /* Write out to ITU with CACHE op */ + cache_op(Index_Store_Tag_D, INDEX_0); + write_c0_ecc(ectlval); + ehb(); + printk("Mapped %ld ITC cells starting at 0x%08x\n", + ((itcblkgrn & 0x7fe00000) >> 20), itc_base); + } +} + +struct class *mt_class; + +static int __init mt_init(void) +{ + struct class *mtc; + + mtc = class_create(THIS_MODULE, "mt"); + if (IS_ERR(mtc)) + return PTR_ERR(mtc); + + mt_class = mtc; + + return 0; +} + +subsys_initcall(mt_init); diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c new file mode 100644 index 000000000..a39ec755e --- /dev/null +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -0,0 +1,2363 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2014 Imagination Technologies Ltd. + * Author: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> + * Author: Markos Chandras <markos.chandras@imgtec.com> + * + * MIPS R2 user space instruction emulator for MIPS R6 + * + */ +#include <linux/bug.h> +#include <linux/compiler.h> +#include <linux/debugfs.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/seq_file.h> + +#include <asm/asm.h> +#include <asm/branch.h> +#include <asm/break.h> +#include <asm/debug.h> +#include <asm/fpu.h> +#include <asm/fpu_emulator.h> +#include <asm/inst.h> +#include <asm/mips-r2-to-r6-emul.h> +#include <asm/local.h> +#include <asm/mipsregs.h> +#include <asm/ptrace.h> +#include <linux/uaccess.h> + +#ifdef CONFIG_64BIT +#define ADDIU "daddiu " +#define INS "dins " +#define EXT "dext " +#else +#define ADDIU "addiu " +#define INS "ins " +#define EXT "ext " +#endif /* CONFIG_64BIT */ + +#define SB "sb " +#define LB "lb " +#define LL "ll " +#define SC "sc " + +#ifdef CONFIG_DEBUG_FS +static DEFINE_PER_CPU(struct mips_r2_emulator_stats, mipsr2emustats); +static DEFINE_PER_CPU(struct mips_r2_emulator_stats, mipsr2bdemustats); +static DEFINE_PER_CPU(struct mips_r2br_emulator_stats, mipsr2bremustats); +#endif + +extern const unsigned int fpucondbit[8]; + +#define MIPS_R2_EMUL_TOTAL_PASS 10 + +int mipsr2_emulation = 0; + +static int __init mipsr2emu_enable(char *s) +{ + mipsr2_emulation = 1; + + pr_info("MIPS R2-to-R6 Emulator Enabled!"); + + return 1; +} +__setup("mipsr2emu", mipsr2emu_enable); + +/** + * mipsr6_emul - Emulate some frequent R2/R5/R6 instructions in delay slot + * for performance instead of the traditional way of using a stack trampoline + * which is rather slow. + * @regs: Process register set + * @ir: Instruction + */ +static inline int mipsr6_emul(struct pt_regs *regs, u32 ir) +{ + switch (MIPSInst_OPCODE(ir)) { + case addiu_op: + if (MIPSInst_RT(ir)) + regs->regs[MIPSInst_RT(ir)] = + (s32)regs->regs[MIPSInst_RS(ir)] + + (s32)MIPSInst_SIMM(ir); + return 0; + case daddiu_op: + if (IS_ENABLED(CONFIG_32BIT)) + break; + + if (MIPSInst_RT(ir)) + regs->regs[MIPSInst_RT(ir)] = + (s64)regs->regs[MIPSInst_RS(ir)] + + (s64)MIPSInst_SIMM(ir); + return 0; + case lwc1_op: + case swc1_op: + case cop1_op: + case cop1x_op: + /* FPU instructions in delay slot */ + return -SIGFPE; + case spec_op: + switch (MIPSInst_FUNC(ir)) { + case or_op: + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + regs->regs[MIPSInst_RS(ir)] | + regs->regs[MIPSInst_RT(ir)]; + return 0; + case sll_op: + if (MIPSInst_RS(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s32)(((u32)regs->regs[MIPSInst_RT(ir)]) << + MIPSInst_FD(ir)); + return 0; + case srl_op: + if (MIPSInst_RS(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s32)(((u32)regs->regs[MIPSInst_RT(ir)]) >> + MIPSInst_FD(ir)); + return 0; + case addu_op: + if (MIPSInst_FD(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s32)((u32)regs->regs[MIPSInst_RS(ir)] + + (u32)regs->regs[MIPSInst_RT(ir)]); + return 0; + case subu_op: + if (MIPSInst_FD(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s32)((u32)regs->regs[MIPSInst_RS(ir)] - + (u32)regs->regs[MIPSInst_RT(ir)]); + return 0; + case dsll_op: + if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_RS(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s64)(((u64)regs->regs[MIPSInst_RT(ir)]) << + MIPSInst_FD(ir)); + return 0; + case dsrl_op: + if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_RS(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s64)(((u64)regs->regs[MIPSInst_RT(ir)]) >> + MIPSInst_FD(ir)); + return 0; + case daddu_op: + if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_FD(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (u64)regs->regs[MIPSInst_RS(ir)] + + (u64)regs->regs[MIPSInst_RT(ir)]; + return 0; + case dsubu_op: + if (IS_ENABLED(CONFIG_32BIT) || MIPSInst_FD(ir)) + break; + + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = + (s64)((u64)regs->regs[MIPSInst_RS(ir)] - + (u64)regs->regs[MIPSInst_RT(ir)]); + return 0; + } + break; + default: + pr_debug("No fastpath BD emulation for instruction 0x%08x (op: %02x)\n", + ir, MIPSInst_OPCODE(ir)); + } + + return SIGILL; +} + +/** + * movf_func - Emulate a MOVF instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int movf_func(struct pt_regs *regs, u32 ir) +{ + u32 csr; + u32 cond; + + csr = current->thread.fpu.fcr31; + cond = fpucondbit[MIPSInst_RT(ir) >> 2]; + + if (((csr & cond) == 0) && MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)]; + + MIPS_R2_STATS(movs); + + return 0; +} + +/** + * movt_func - Emulate a MOVT instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int movt_func(struct pt_regs *regs, u32 ir) +{ + u32 csr; + u32 cond; + + csr = current->thread.fpu.fcr31; + cond = fpucondbit[MIPSInst_RT(ir) >> 2]; + + if (((csr & cond) != 0) && MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)]; + + MIPS_R2_STATS(movs); + + return 0; +} + +/** + * jr_func - Emulate a JR instruction. + * @pt_regs: Process register set + * @ir: Instruction + * + * Returns SIGILL if JR was in delay slot, SIGEMT if we + * can't compute the EPC, SIGSEGV if we can't access the + * userland instruction or 0 on success. + */ +static int jr_func(struct pt_regs *regs, u32 ir) +{ + int err; + unsigned long cepc, epc, nepc; + u32 nir; + + if (delay_slot(regs)) + return SIGILL; + + /* EPC after the RI/JR instruction */ + nepc = regs->cp0_epc; + /* Roll back to the reserved R2 JR instruction */ + regs->cp0_epc -= 4; + epc = regs->cp0_epc; + err = __compute_return_epc(regs); + + if (err < 0) + return SIGEMT; + + + /* Computed EPC */ + cepc = regs->cp0_epc; + + /* Get DS instruction */ + err = __get_user(nir, (u32 __user *)nepc); + if (err) + return SIGSEGV; + + MIPS_R2BR_STATS(jrs); + + /* If nir == 0(NOP), then nothing else to do */ + if (nir) { + /* + * Negative err means FPU instruction in BD-slot, + * Zero err means 'BD-slot emulation done' + * For anything else we go back to trampoline emulation. + */ + err = mipsr6_emul(regs, nir); + if (err > 0) { + regs->cp0_epc = nepc; + err = mips_dsemul(regs, nir, epc, cepc); + if (err == SIGILL) + err = SIGEMT; + MIPS_R2_STATS(dsemul); + } + } + + return err; +} + +/** + * movz_func - Emulate a MOVZ instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int movz_func(struct pt_regs *regs, u32 ir) +{ + if (((regs->regs[MIPSInst_RT(ir)]) == 0) && MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)]; + MIPS_R2_STATS(movs); + + return 0; +} + +/** + * movn_func - Emulate a MOVZ instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int movn_func(struct pt_regs *regs, u32 ir) +{ + if (((regs->regs[MIPSInst_RT(ir)]) != 0) && MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = regs->regs[MIPSInst_RS(ir)]; + MIPS_R2_STATS(movs); + + return 0; +} + +/** + * mfhi_func - Emulate a MFHI instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int mfhi_func(struct pt_regs *regs, u32 ir) +{ + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = regs->hi; + + MIPS_R2_STATS(hilo); + + return 0; +} + +/** + * mthi_func - Emulate a MTHI instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int mthi_func(struct pt_regs *regs, u32 ir) +{ + regs->hi = regs->regs[MIPSInst_RS(ir)]; + + MIPS_R2_STATS(hilo); + + return 0; +} + +/** + * mflo_func - Emulate a MFLO instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int mflo_func(struct pt_regs *regs, u32 ir) +{ + if (MIPSInst_RD(ir)) + regs->regs[MIPSInst_RD(ir)] = regs->lo; + + MIPS_R2_STATS(hilo); + + return 0; +} + +/** + * mtlo_func - Emulate a MTLO instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int mtlo_func(struct pt_regs *regs, u32 ir) +{ + regs->lo = regs->regs[MIPSInst_RS(ir)]; + + MIPS_R2_STATS(hilo); + + return 0; +} + +/** + * mult_func - Emulate a MULT instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int mult_func(struct pt_regs *regs, u32 ir) +{ + s64 res; + s32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (s64)rt * (s64)rs; + + rs = res; + regs->lo = (s64)rs; + rt = res >> 32; + res = (s64)rt; + regs->hi = res; + + MIPS_R2_STATS(muls); + + return 0; +} + +/** + * multu_func - Emulate a MULTU instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int multu_func(struct pt_regs *regs, u32 ir) +{ + u64 res; + u32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (u64)rt * (u64)rs; + rt = res; + regs->lo = (s64)(s32)rt; + regs->hi = (s64)(s32)(res >> 32); + + MIPS_R2_STATS(muls); + + return 0; +} + +/** + * div_func - Emulate a DIV instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int div_func(struct pt_regs *regs, u32 ir) +{ + s32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + + regs->lo = (s64)(rs / rt); + regs->hi = (s64)(rs % rt); + + MIPS_R2_STATS(divs); + + return 0; +} + +/** + * divu_func - Emulate a DIVU instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int divu_func(struct pt_regs *regs, u32 ir) +{ + u32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + + regs->lo = (s64)(rs / rt); + regs->hi = (s64)(rs % rt); + + MIPS_R2_STATS(divs); + + return 0; +} + +/** + * dmult_func - Emulate a DMULT instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 on success or SIGILL for 32-bit kernels. + */ +static int dmult_func(struct pt_regs *regs, u32 ir) +{ + s64 res; + s64 rt, rs; + + if (IS_ENABLED(CONFIG_32BIT)) + return SIGILL; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = rt * rs; + + regs->lo = res; + __asm__ __volatile__( + "dmuh %0, %1, %2\t\n" + : "=r"(res) + : "r"(rt), "r"(rs)); + + regs->hi = res; + + MIPS_R2_STATS(muls); + + return 0; +} + +/** + * dmultu_func - Emulate a DMULTU instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 on success or SIGILL for 32-bit kernels. + */ +static int dmultu_func(struct pt_regs *regs, u32 ir) +{ + u64 res; + u64 rt, rs; + + if (IS_ENABLED(CONFIG_32BIT)) + return SIGILL; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = rt * rs; + + regs->lo = res; + __asm__ __volatile__( + "dmuhu %0, %1, %2\t\n" + : "=r"(res) + : "r"(rt), "r"(rs)); + + regs->hi = res; + + MIPS_R2_STATS(muls); + + return 0; +} + +/** + * ddiv_func - Emulate a DDIV instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 on success or SIGILL for 32-bit kernels. + */ +static int ddiv_func(struct pt_regs *regs, u32 ir) +{ + s64 rt, rs; + + if (IS_ENABLED(CONFIG_32BIT)) + return SIGILL; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + + regs->lo = rs / rt; + regs->hi = rs % rt; + + MIPS_R2_STATS(divs); + + return 0; +} + +/** + * ddivu_func - Emulate a DDIVU instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 on success or SIGILL for 32-bit kernels. + */ +static int ddivu_func(struct pt_regs *regs, u32 ir) +{ + u64 rt, rs; + + if (IS_ENABLED(CONFIG_32BIT)) + return SIGILL; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + + regs->lo = rs / rt; + regs->hi = rs % rt; + + MIPS_R2_STATS(divs); + + return 0; +} + +/* R6 removed instructions for the SPECIAL opcode */ +static const struct r2_decoder_table spec_op_table[] = { + { 0xfc1ff83f, 0x00000008, jr_func }, + { 0xfc00ffff, 0x00000018, mult_func }, + { 0xfc00ffff, 0x00000019, multu_func }, + { 0xfc00ffff, 0x0000001c, dmult_func }, + { 0xfc00ffff, 0x0000001d, dmultu_func }, + { 0xffff07ff, 0x00000010, mfhi_func }, + { 0xfc1fffff, 0x00000011, mthi_func }, + { 0xffff07ff, 0x00000012, mflo_func }, + { 0xfc1fffff, 0x00000013, mtlo_func }, + { 0xfc0307ff, 0x00000001, movf_func }, + { 0xfc0307ff, 0x00010001, movt_func }, + { 0xfc0007ff, 0x0000000a, movz_func }, + { 0xfc0007ff, 0x0000000b, movn_func }, + { 0xfc00ffff, 0x0000001a, div_func }, + { 0xfc00ffff, 0x0000001b, divu_func }, + { 0xfc00ffff, 0x0000001e, ddiv_func }, + { 0xfc00ffff, 0x0000001f, ddivu_func }, + {} +}; + +/** + * madd_func - Emulate a MADD instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int madd_func(struct pt_regs *regs, u32 ir) +{ + s64 res; + s32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (s64)rt * (s64)rs; + rt = regs->hi; + rs = regs->lo; + res += ((((s64)rt) << 32) | (u32)rs); + + rt = res; + regs->lo = (s64)rt; + rs = res >> 32; + regs->hi = (s64)rs; + + MIPS_R2_STATS(dsps); + + return 0; +} + +/** + * maddu_func - Emulate a MADDU instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int maddu_func(struct pt_regs *regs, u32 ir) +{ + u64 res; + u32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (u64)rt * (u64)rs; + rt = regs->hi; + rs = regs->lo; + res += ((((s64)rt) << 32) | (u32)rs); + + rt = res; + regs->lo = (s64)(s32)rt; + rs = res >> 32; + regs->hi = (s64)(s32)rs; + + MIPS_R2_STATS(dsps); + + return 0; +} + +/** + * msub_func - Emulate a MSUB instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int msub_func(struct pt_regs *regs, u32 ir) +{ + s64 res; + s32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (s64)rt * (s64)rs; + rt = regs->hi; + rs = regs->lo; + res = ((((s64)rt) << 32) | (u32)rs) - res; + + rt = res; + regs->lo = (s64)rt; + rs = res >> 32; + regs->hi = (s64)rs; + + MIPS_R2_STATS(dsps); + + return 0; +} + +/** + * msubu_func - Emulate a MSUBU instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int msubu_func(struct pt_regs *regs, u32 ir) +{ + u64 res; + u32 rt, rs; + + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (u64)rt * (u64)rs; + rt = regs->hi; + rs = regs->lo; + res = ((((s64)rt) << 32) | (u32)rs) - res; + + rt = res; + regs->lo = (s64)(s32)rt; + rs = res >> 32; + regs->hi = (s64)(s32)rs; + + MIPS_R2_STATS(dsps); + + return 0; +} + +/** + * mul_func - Emulate a MUL instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int mul_func(struct pt_regs *regs, u32 ir) +{ + s64 res; + s32 rt, rs; + + if (!MIPSInst_RD(ir)) + return 0; + rt = regs->regs[MIPSInst_RT(ir)]; + rs = regs->regs[MIPSInst_RS(ir)]; + res = (s64)rt * (s64)rs; + + rs = res; + regs->regs[MIPSInst_RD(ir)] = (s64)rs; + + MIPS_R2_STATS(muls); + + return 0; +} + +/** + * clz_func - Emulate a CLZ instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int clz_func(struct pt_regs *regs, u32 ir) +{ + u32 res; + u32 rs; + + if (!MIPSInst_RD(ir)) + return 0; + + rs = regs->regs[MIPSInst_RS(ir)]; + __asm__ __volatile__("clz %0, %1" : "=r"(res) : "r"(rs)); + regs->regs[MIPSInst_RD(ir)] = res; + + MIPS_R2_STATS(bops); + + return 0; +} + +/** + * clo_func - Emulate a CLO instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ + +static int clo_func(struct pt_regs *regs, u32 ir) +{ + u32 res; + u32 rs; + + if (!MIPSInst_RD(ir)) + return 0; + + rs = regs->regs[MIPSInst_RS(ir)]; + __asm__ __volatile__("clo %0, %1" : "=r"(res) : "r"(rs)); + regs->regs[MIPSInst_RD(ir)] = res; + + MIPS_R2_STATS(bops); + + return 0; +} + +/** + * dclz_func - Emulate a DCLZ instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int dclz_func(struct pt_regs *regs, u32 ir) +{ + u64 res; + u64 rs; + + if (IS_ENABLED(CONFIG_32BIT)) + return SIGILL; + + if (!MIPSInst_RD(ir)) + return 0; + + rs = regs->regs[MIPSInst_RS(ir)]; + __asm__ __volatile__("dclz %0, %1" : "=r"(res) : "r"(rs)); + regs->regs[MIPSInst_RD(ir)] = res; + + MIPS_R2_STATS(bops); + + return 0; +} + +/** + * dclo_func - Emulate a DCLO instruction + * @regs: Process register set + * @ir: Instruction + * + * Returns 0 since it always succeeds. + */ +static int dclo_func(struct pt_regs *regs, u32 ir) +{ + u64 res; + u64 rs; + + if (IS_ENABLED(CONFIG_32BIT)) + return SIGILL; + + if (!MIPSInst_RD(ir)) + return 0; + + rs = regs->regs[MIPSInst_RS(ir)]; + __asm__ __volatile__("dclo %0, %1" : "=r"(res) : "r"(rs)); + regs->regs[MIPSInst_RD(ir)] = res; + + MIPS_R2_STATS(bops); + + return 0; +} + +/* R6 removed instructions for the SPECIAL2 opcode */ +static const struct r2_decoder_table spec2_op_table[] = { + { 0xfc00ffff, 0x70000000, madd_func }, + { 0xfc00ffff, 0x70000001, maddu_func }, + { 0xfc0007ff, 0x70000002, mul_func }, + { 0xfc00ffff, 0x70000004, msub_func }, + { 0xfc00ffff, 0x70000005, msubu_func }, + { 0xfc0007ff, 0x70000020, clz_func }, + { 0xfc0007ff, 0x70000021, clo_func }, + { 0xfc0007ff, 0x70000024, dclz_func }, + { 0xfc0007ff, 0x70000025, dclo_func }, + { } +}; + +static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst, + const struct r2_decoder_table *table) +{ + const struct r2_decoder_table *p; + int err; + + for (p = table; p->func; p++) { + if ((inst & p->mask) == p->code) { + err = (p->func)(regs, inst); + return err; + } + } + return SIGILL; +} + +/** + * mipsr2_decoder: Decode and emulate a MIPS R2 instruction + * @regs: Process register set + * @inst: Instruction to decode and emulate + * @fcr31: Floating Point Control and Status Register Cause bits returned + */ +int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31) +{ + int err = 0; + unsigned long vaddr; + u32 nir; + unsigned long cpc, epc, nepc, r31, res, rs, rt; + + void __user *fault_addr = NULL; + int pass = 0; + +repeat: + r31 = regs->regs[31]; + epc = regs->cp0_epc; + err = compute_return_epc(regs); + if (err < 0) { + BUG(); + return SIGEMT; + } + pr_debug("Emulating the 0x%08x R2 instruction @ 0x%08lx (pass=%d))\n", + inst, epc, pass); + + switch (MIPSInst_OPCODE(inst)) { + case spec_op: + err = mipsr2_find_op_func(regs, inst, spec_op_table); + if (err < 0) { + /* FPU instruction under JR */ + regs->cp0_cause |= CAUSEF_BD; + goto fpu_emul; + } + break; + case spec2_op: + err = mipsr2_find_op_func(regs, inst, spec2_op_table); + break; + case bcond_op: + rt = MIPSInst_RT(inst); + rs = MIPSInst_RS(inst); + switch (rt) { + case tgei_op: + if ((long)regs->regs[rs] >= MIPSInst_SIMM(inst)) + do_trap_or_bp(regs, 0, 0, "TGEI"); + + MIPS_R2_STATS(traps); + + break; + case tgeiu_op: + if (regs->regs[rs] >= MIPSInst_UIMM(inst)) + do_trap_or_bp(regs, 0, 0, "TGEIU"); + + MIPS_R2_STATS(traps); + + break; + case tlti_op: + if ((long)regs->regs[rs] < MIPSInst_SIMM(inst)) + do_trap_or_bp(regs, 0, 0, "TLTI"); + + MIPS_R2_STATS(traps); + + break; + case tltiu_op: + if (regs->regs[rs] < MIPSInst_UIMM(inst)) + do_trap_or_bp(regs, 0, 0, "TLTIU"); + + MIPS_R2_STATS(traps); + + break; + case teqi_op: + if (regs->regs[rs] == MIPSInst_SIMM(inst)) + do_trap_or_bp(regs, 0, 0, "TEQI"); + + MIPS_R2_STATS(traps); + + break; + case tnei_op: + if (regs->regs[rs] != MIPSInst_SIMM(inst)) + do_trap_or_bp(regs, 0, 0, "TNEI"); + + MIPS_R2_STATS(traps); + + break; + case bltzl_op: + case bgezl_op: + case bltzall_op: + case bgezall_op: + if (delay_slot(regs)) { + err = SIGILL; + break; + } + regs->regs[31] = r31; + regs->cp0_epc = epc; + err = __compute_return_epc(regs); + if (err < 0) + return SIGEMT; + if (err != BRANCH_LIKELY_TAKEN) + break; + cpc = regs->cp0_epc; + nepc = epc + 4; + err = __get_user(nir, (u32 __user *)nepc); + if (err) { + err = SIGSEGV; + break; + } + /* + * This will probably be optimized away when + * CONFIG_DEBUG_FS is not enabled + */ + switch (rt) { + case bltzl_op: + MIPS_R2BR_STATS(bltzl); + break; + case bgezl_op: + MIPS_R2BR_STATS(bgezl); + break; + case bltzall_op: + MIPS_R2BR_STATS(bltzall); + break; + case bgezall_op: + MIPS_R2BR_STATS(bgezall); + break; + } + + switch (MIPSInst_OPCODE(nir)) { + case cop1_op: + case cop1x_op: + case lwc1_op: + case swc1_op: + regs->cp0_cause |= CAUSEF_BD; + goto fpu_emul; + } + if (nir) { + err = mipsr6_emul(regs, nir); + if (err > 0) { + err = mips_dsemul(regs, nir, epc, cpc); + if (err == SIGILL) + err = SIGEMT; + MIPS_R2_STATS(dsemul); + } + } + break; + case bltzal_op: + case bgezal_op: + if (delay_slot(regs)) { + err = SIGILL; + break; + } + regs->regs[31] = r31; + regs->cp0_epc = epc; + err = __compute_return_epc(regs); + if (err < 0) + return SIGEMT; + cpc = regs->cp0_epc; + nepc = epc + 4; + err = __get_user(nir, (u32 __user *)nepc); + if (err) { + err = SIGSEGV; + break; + } + /* + * This will probably be optimized away when + * CONFIG_DEBUG_FS is not enabled + */ + switch (rt) { + case bltzal_op: + MIPS_R2BR_STATS(bltzal); + break; + case bgezal_op: + MIPS_R2BR_STATS(bgezal); + break; + } + + switch (MIPSInst_OPCODE(nir)) { + case cop1_op: + case cop1x_op: + case lwc1_op: + case swc1_op: + regs->cp0_cause |= CAUSEF_BD; + goto fpu_emul; + } + if (nir) { + err = mipsr6_emul(regs, nir); + if (err > 0) { + err = mips_dsemul(regs, nir, epc, cpc); + if (err == SIGILL) + err = SIGEMT; + MIPS_R2_STATS(dsemul); + } + } + break; + default: + regs->regs[31] = r31; + regs->cp0_epc = epc; + err = SIGILL; + break; + } + break; + + case blezl_op: + case bgtzl_op: + /* + * For BLEZL and BGTZL, rt field must be set to 0. If this + * is not the case, this may be an encoding of a MIPS R6 + * instruction, so return to CPU execution if this occurs + */ + if (MIPSInst_RT(inst)) { + err = SIGILL; + break; + } + fallthrough; + case beql_op: + case bnel_op: + if (delay_slot(regs)) { + err = SIGILL; + break; + } + regs->regs[31] = r31; + regs->cp0_epc = epc; + err = __compute_return_epc(regs); + if (err < 0) + return SIGEMT; + if (err != BRANCH_LIKELY_TAKEN) + break; + cpc = regs->cp0_epc; + nepc = epc + 4; + err = __get_user(nir, (u32 __user *)nepc); + if (err) { + err = SIGSEGV; + break; + } + /* + * This will probably be optimized away when + * CONFIG_DEBUG_FS is not enabled + */ + switch (MIPSInst_OPCODE(inst)) { + case beql_op: + MIPS_R2BR_STATS(beql); + break; + case bnel_op: + MIPS_R2BR_STATS(bnel); + break; + case blezl_op: + MIPS_R2BR_STATS(blezl); + break; + case bgtzl_op: + MIPS_R2BR_STATS(bgtzl); + break; + } + + switch (MIPSInst_OPCODE(nir)) { + case cop1_op: + case cop1x_op: + case lwc1_op: + case swc1_op: + regs->cp0_cause |= CAUSEF_BD; + goto fpu_emul; + } + if (nir) { + err = mipsr6_emul(regs, nir); + if (err > 0) { + err = mips_dsemul(regs, nir, epc, cpc); + if (err == SIGILL) + err = SIGEMT; + MIPS_R2_STATS(dsemul); + } + } + break; + case lwc1_op: + case swc1_op: + case cop1_op: + case cop1x_op: +fpu_emul: + regs->regs[31] = r31; + regs->cp0_epc = epc; + + err = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0, + &fault_addr); + + /* + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. + */ + *fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~res; + + /* + * this is a tricky issue - lose_fpu() uses LL/SC atomics + * if FPU is owned and effectively cancels user level LL/SC. + * So, it could be logical to don't restore FPU ownership here. + * But the sequence of multiple FPU instructions is much much + * more often than LL-FPU-SC and I prefer loop here until + * next scheduler cycle cancels FPU ownership + */ + own_fpu(1); /* Restore FPU state. */ + + if (err) + current->thread.cp0_baduaddr = (unsigned long)fault_addr; + + MIPS_R2_STATS(fpus); + + break; + + case lwl_op: + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 4)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + "1:" LB "%1, 0(%2)\n" + INS "%0, %1, 24, 8\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + "2:" LB "%1, 0(%2)\n" + INS "%0, %1, 16, 8\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + "3:" LB "%1, 0(%2)\n" + INS "%0, %1, 8, 8\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + "4:" LB "%1, 0(%2)\n" + INS "%0, %1, 0, 8\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + "1:" LB "%1, 0(%2)\n" + INS "%0, %1, 24, 8\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + "2:" LB "%1, 0(%2)\n" + INS "%0, %1, 16, 8\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + "3:" LB "%1, 0(%2)\n" + INS "%0, %1, 8, 8\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + "4:" LB "%1, 0(%2)\n" + INS "%0, %1, 0, 8\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9: sll %0, %0, 0\n" + "10:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 10b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV)); + + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = rt; + + MIPS_R2_STATS(loads); + + break; + + case lwr_op: + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 4)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + "1:" LB "%1, 0(%2)\n" + INS "%0, %1, 0, 8\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + "2:" LB "%1, 0(%2)\n" + INS "%0, %1, 8, 8\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + "3:" LB "%1, 0(%2)\n" + INS "%0, %1, 16, 8\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + "4:" LB "%1, 0(%2)\n" + INS "%0, %1, 24, 8\n" + " sll %0, %0, 0\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + "1:" LB "%1, 0(%2)\n" + INS "%0, %1, 0, 8\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + "2:" LB "%1, 0(%2)\n" + INS "%0, %1, 8, 8\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + "3:" LB "%1, 0(%2)\n" + INS "%0, %1, 16, 8\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + "4:" LB "%1, 0(%2)\n" + INS "%0, %1, 24, 8\n" + " sll %0, %0, 0\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + "10:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 10b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV)); + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = rt; + + MIPS_R2_STATS(loads); + + break; + + case swl_op: + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 4)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + EXT "%1, %0, 24, 8\n" + "1:" SB "%1, 0(%2)\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + EXT "%1, %0, 16, 8\n" + "2:" SB "%1, 0(%2)\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + EXT "%1, %0, 8, 8\n" + "3:" SB "%1, 0(%2)\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + EXT "%1, %0, 0, 8\n" + "4:" SB "%1, 0(%2)\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + EXT "%1, %0, 24, 8\n" + "1:" SB "%1, 0(%2)\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + EXT "%1, %0, 16, 8\n" + "2:" SB "%1, 0(%2)\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + EXT "%1, %0, 8, 8\n" + "3:" SB "%1, 0(%2)\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + EXT "%1, %0, 0, 8\n" + "4:" SB "%1, 0(%2)\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 9b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV) + : "memory"); + + MIPS_R2_STATS(stores); + + break; + + case swr_op: + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 4)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + EXT "%1, %0, 0, 8\n" + "1:" SB "%1, 0(%2)\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + EXT "%1, %0, 8, 8\n" + "2:" SB "%1, 0(%2)\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + EXT "%1, %0, 16, 8\n" + "3:" SB "%1, 0(%2)\n" + ADDIU "%2, %2, 1\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + EXT "%1, %0, 24, 8\n" + "4:" SB "%1, 0(%2)\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + EXT "%1, %0, 0, 8\n" + "1:" SB "%1, 0(%2)\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + EXT "%1, %0, 8, 8\n" + "2:" SB "%1, 0(%2)\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + EXT "%1, %0, 16, 8\n" + "3:" SB "%1, 0(%2)\n" + " andi %1, %2, 0x3\n" + " beq $0, %1, 9f\n" + ADDIU "%2, %2, -1\n" + EXT "%1, %0, 24, 8\n" + "4:" SB "%1, 0(%2)\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 9b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV) + : "memory"); + + MIPS_R2_STATS(stores); + + break; + + case ldl_op: + if (IS_ENABLED(CONFIG_32BIT)) { + err = SIGILL; + break; + } + + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 8)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + "1: lb %1, 0(%2)\n" + " dinsu %0, %1, 56, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "2: lb %1, 0(%2)\n" + " dinsu %0, %1, 48, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "3: lb %1, 0(%2)\n" + " dinsu %0, %1, 40, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "4: lb %1, 0(%2)\n" + " dinsu %0, %1, 32, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "5: lb %1, 0(%2)\n" + " dins %0, %1, 24, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "6: lb %1, 0(%2)\n" + " dins %0, %1, 16, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "7: lb %1, 0(%2)\n" + " dins %0, %1, 8, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "0: lb %1, 0(%2)\n" + " dins %0, %1, 0, 8\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + "1: lb %1, 0(%2)\n" + " dinsu %0, %1, 56, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "2: lb %1, 0(%2)\n" + " dinsu %0, %1, 48, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "3: lb %1, 0(%2)\n" + " dinsu %0, %1, 40, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "4: lb %1, 0(%2)\n" + " dinsu %0, %1, 32, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "5: lb %1, 0(%2)\n" + " dins %0, %1, 24, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "6: lb %1, 0(%2)\n" + " dins %0, %1, 16, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "7: lb %1, 0(%2)\n" + " dins %0, %1, 8, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "0: lb %1, 0(%2)\n" + " dins %0, %1, 0, 8\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 9b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + STR(PTR) " 5b,8b\n" + STR(PTR) " 6b,8b\n" + STR(PTR) " 7b,8b\n" + STR(PTR) " 0b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV)); + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = rt; + + MIPS_R2_STATS(loads); + break; + + case ldr_op: + if (IS_ENABLED(CONFIG_32BIT)) { + err = SIGILL; + break; + } + + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 8)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + "1: lb %1, 0(%2)\n" + " dins %0, %1, 0, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "2: lb %1, 0(%2)\n" + " dins %0, %1, 8, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "3: lb %1, 0(%2)\n" + " dins %0, %1, 16, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "4: lb %1, 0(%2)\n" + " dins %0, %1, 24, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "5: lb %1, 0(%2)\n" + " dinsu %0, %1, 32, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "6: lb %1, 0(%2)\n" + " dinsu %0, %1, 40, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "7: lb %1, 0(%2)\n" + " dinsu %0, %1, 48, 8\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + "0: lb %1, 0(%2)\n" + " dinsu %0, %1, 56, 8\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + "1: lb %1, 0(%2)\n" + " dins %0, %1, 0, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "2: lb %1, 0(%2)\n" + " dins %0, %1, 8, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "3: lb %1, 0(%2)\n" + " dins %0, %1, 16, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "4: lb %1, 0(%2)\n" + " dins %0, %1, 24, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "5: lb %1, 0(%2)\n" + " dinsu %0, %1, 32, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "6: lb %1, 0(%2)\n" + " dinsu %0, %1, 40, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "7: lb %1, 0(%2)\n" + " dinsu %0, %1, 48, 8\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + "0: lb %1, 0(%2)\n" + " dinsu %0, %1, 56, 8\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 9b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + STR(PTR) " 5b,8b\n" + STR(PTR) " 6b,8b\n" + STR(PTR) " 7b,8b\n" + STR(PTR) " 0b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV)); + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = rt; + + MIPS_R2_STATS(loads); + break; + + case sdl_op: + if (IS_ENABLED(CONFIG_32BIT)) { + err = SIGILL; + break; + } + + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 8)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + " dextu %1, %0, 56, 8\n" + "1: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 48, 8\n" + "2: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 40, 8\n" + "3: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 32, 8\n" + "4: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 24, 8\n" + "5: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 16, 8\n" + "6: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 8, 8\n" + "7: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 0, 8\n" + "0: sb %1, 0(%2)\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + " dextu %1, %0, 56, 8\n" + "1: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 48, 8\n" + "2: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 40, 8\n" + "3: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 32, 8\n" + "4: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 24, 8\n" + "5: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 16, 8\n" + "6: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 8, 8\n" + "7: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 0, 8\n" + "0: sb %1, 0(%2)\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 9b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + STR(PTR) " 5b,8b\n" + STR(PTR) " 6b,8b\n" + STR(PTR) " 7b,8b\n" + STR(PTR) " 0b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV) + : "memory"); + + MIPS_R2_STATS(stores); + break; + + case sdr_op: + if (IS_ENABLED(CONFIG_32BIT)) { + err = SIGILL; + break; + } + + rt = regs->regs[MIPSInst_RT(inst)]; + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (!access_ok((void __user *)vaddr, 8)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGSEGV; + break; + } + __asm__ __volatile__( + " .set push\n" + " .set reorder\n" +#ifdef CONFIG_CPU_LITTLE_ENDIAN + " dext %1, %0, 0, 8\n" + "1: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 8, 8\n" + "2: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 16, 8\n" + "3: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dext %1, %0, 24, 8\n" + "4: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 32, 8\n" + "5: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 40, 8\n" + "6: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 48, 8\n" + "7: sb %1, 0(%2)\n" + " daddiu %2, %2, 1\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " dextu %1, %0, 56, 8\n" + "0: sb %1, 0(%2)\n" +#else /* !CONFIG_CPU_LITTLE_ENDIAN */ + " dext %1, %0, 0, 8\n" + "1: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 8, 8\n" + "2: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 16, 8\n" + "3: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dext %1, %0, 24, 8\n" + "4: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 32, 8\n" + "5: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 40, 8\n" + "6: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 48, 8\n" + "7: sb %1, 0(%2)\n" + " andi %1, %2, 0x7\n" + " beq $0, %1, 9f\n" + " daddiu %2, %2, -1\n" + " dextu %1, %0, 56, 8\n" + "0: sb %1, 0(%2)\n" +#endif /* CONFIG_CPU_LITTLE_ENDIAN */ + "9:\n" + " .insn\n" + " .section .fixup,\"ax\"\n" + "8: li %3,%4\n" + " j 9b\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + STR(PTR) " 1b,8b\n" + STR(PTR) " 2b,8b\n" + STR(PTR) " 3b,8b\n" + STR(PTR) " 4b,8b\n" + STR(PTR) " 5b,8b\n" + STR(PTR) " 6b,8b\n" + STR(PTR) " 7b,8b\n" + STR(PTR) " 0b,8b\n" + " .previous\n" + " .set pop\n" + : "+&r"(rt), "=&r"(rs), + "+&r"(vaddr), "+&r"(err) + : "i"(SIGSEGV) + : "memory"); + + MIPS_R2_STATS(stores); + + break; + case ll_op: + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (vaddr & 0x3) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + if (!access_ok((void __user *)vaddr, 4)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + + if (!cpu_has_rw_llb) { + /* + * An LL/SC block can't be safely emulated without + * a Config5/LLB availability. So it's probably time to + * kill our process before things get any worse. This is + * because Config5/LLB allows us to use ERETNC so that + * the LLAddr/LLB bit is not cleared when we return from + * an exception. MIPS R2 LL/SC instructions trap with an + * RI exception so once we emulate them here, we return + * back to userland with ERETNC. That preserves the + * LLAddr/LLB so the subsequent SC instruction will + * succeed preserving the atomic semantics of the LL/SC + * block. Without that, there is no safe way to emulate + * an LL/SC block in MIPSR2 userland. + */ + pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); + err = SIGKILL; + break; + } + + __asm__ __volatile__( + "1:\n" + "ll %0, 0(%2)\n" + "2:\n" + ".insn\n" + ".section .fixup,\"ax\"\n" + "3:\n" + "li %1, %3\n" + "j 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + STR(PTR) " 1b,3b\n" + ".previous\n" + : "=&r"(res), "+&r"(err) + : "r"(vaddr), "i"(SIGSEGV) + : "memory"); + + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = res; + MIPS_R2_STATS(llsc); + + break; + + case sc_op: + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (vaddr & 0x3) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + if (!access_ok((void __user *)vaddr, 4)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + + if (!cpu_has_rw_llb) { + /* + * An LL/SC block can't be safely emulated without + * a Config5/LLB availability. So it's probably time to + * kill our process before things get any worse. This is + * because Config5/LLB allows us to use ERETNC so that + * the LLAddr/LLB bit is not cleared when we return from + * an exception. MIPS R2 LL/SC instructions trap with an + * RI exception so once we emulate them here, we return + * back to userland with ERETNC. That preserves the + * LLAddr/LLB so the subsequent SC instruction will + * succeed preserving the atomic semantics of the LL/SC + * block. Without that, there is no safe way to emulate + * an LL/SC block in MIPSR2 userland. + */ + pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); + err = SIGKILL; + break; + } + + res = regs->regs[MIPSInst_RT(inst)]; + + __asm__ __volatile__( + "1:\n" + "sc %0, 0(%2)\n" + "2:\n" + ".insn\n" + ".section .fixup,\"ax\"\n" + "3:\n" + "li %1, %3\n" + "j 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + STR(PTR) " 1b,3b\n" + ".previous\n" + : "+&r"(res), "+&r"(err) + : "r"(vaddr), "i"(SIGSEGV)); + + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = res; + + MIPS_R2_STATS(llsc); + + break; + + case lld_op: + if (IS_ENABLED(CONFIG_32BIT)) { + err = SIGILL; + break; + } + + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (vaddr & 0x7) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + if (!access_ok((void __user *)vaddr, 8)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + + if (!cpu_has_rw_llb) { + /* + * An LL/SC block can't be safely emulated without + * a Config5/LLB availability. So it's probably time to + * kill our process before things get any worse. This is + * because Config5/LLB allows us to use ERETNC so that + * the LLAddr/LLB bit is not cleared when we return from + * an exception. MIPS R2 LL/SC instructions trap with an + * RI exception so once we emulate them here, we return + * back to userland with ERETNC. That preserves the + * LLAddr/LLB so the subsequent SC instruction will + * succeed preserving the atomic semantics of the LL/SC + * block. Without that, there is no safe way to emulate + * an LL/SC block in MIPSR2 userland. + */ + pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); + err = SIGKILL; + break; + } + + __asm__ __volatile__( + "1:\n" + "lld %0, 0(%2)\n" + "2:\n" + ".insn\n" + ".section .fixup,\"ax\"\n" + "3:\n" + "li %1, %3\n" + "j 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + STR(PTR) " 1b,3b\n" + ".previous\n" + : "=&r"(res), "+&r"(err) + : "r"(vaddr), "i"(SIGSEGV) + : "memory"); + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = res; + + MIPS_R2_STATS(llsc); + + break; + + case scd_op: + if (IS_ENABLED(CONFIG_32BIT)) { + err = SIGILL; + break; + } + + vaddr = regs->regs[MIPSInst_RS(inst)] + MIPSInst_SIMM(inst); + if (vaddr & 0x7) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + if (!access_ok((void __user *)vaddr, 8)) { + current->thread.cp0_baduaddr = vaddr; + err = SIGBUS; + break; + } + + if (!cpu_has_rw_llb) { + /* + * An LL/SC block can't be safely emulated without + * a Config5/LLB availability. So it's probably time to + * kill our process before things get any worse. This is + * because Config5/LLB allows us to use ERETNC so that + * the LLAddr/LLB bit is not cleared when we return from + * an exception. MIPS R2 LL/SC instructions trap with an + * RI exception so once we emulate them here, we return + * back to userland with ERETNC. That preserves the + * LLAddr/LLB so the subsequent SC instruction will + * succeed preserving the atomic semantics of the LL/SC + * block. Without that, there is no safe way to emulate + * an LL/SC block in MIPSR2 userland. + */ + pr_err("Can't emulate MIPSR2 LL/SC without Config5/LLB\n"); + err = SIGKILL; + break; + } + + res = regs->regs[MIPSInst_RT(inst)]; + + __asm__ __volatile__( + "1:\n" + "scd %0, 0(%2)\n" + "2:\n" + ".insn\n" + ".section .fixup,\"ax\"\n" + "3:\n" + "li %1, %3\n" + "j 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + STR(PTR) " 1b,3b\n" + ".previous\n" + : "+&r"(res), "+&r"(err) + : "r"(vaddr), "i"(SIGSEGV)); + + if (MIPSInst_RT(inst) && !err) + regs->regs[MIPSInst_RT(inst)] = res; + + MIPS_R2_STATS(llsc); + + break; + case pref_op: + /* skip it */ + break; + default: + err = SIGILL; + } + + /* + * Let's not return to userland just yet. It's costly and + * it's likely we have more R2 instructions to emulate + */ + if (!err && (pass++ < MIPS_R2_EMUL_TOTAL_PASS)) { + regs->cp0_cause &= ~CAUSEF_BD; + err = get_user(inst, (u32 __user *)regs->cp0_epc); + if (!err) + goto repeat; + + if (err < 0) + err = SIGSEGV; + } + + if (err && (err != SIGEMT)) { + regs->regs[31] = r31; + regs->cp0_epc = epc; + } + + /* Likely a MIPS R6 compatible instruction */ + if (pass && (err == SIGILL)) + err = 0; + + return err; +} + +#ifdef CONFIG_DEBUG_FS + +static int mipsr2_emul_show(struct seq_file *s, void *unused) +{ + + seq_printf(s, "Instruction\tTotal\tBDslot\n------------------------------\n"); + seq_printf(s, "movs\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.movs), + (unsigned long)__this_cpu_read(mipsr2bdemustats.movs)); + seq_printf(s, "hilo\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.hilo), + (unsigned long)__this_cpu_read(mipsr2bdemustats.hilo)); + seq_printf(s, "muls\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.muls), + (unsigned long)__this_cpu_read(mipsr2bdemustats.muls)); + seq_printf(s, "divs\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.divs), + (unsigned long)__this_cpu_read(mipsr2bdemustats.divs)); + seq_printf(s, "dsps\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.dsps), + (unsigned long)__this_cpu_read(mipsr2bdemustats.dsps)); + seq_printf(s, "bops\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.bops), + (unsigned long)__this_cpu_read(mipsr2bdemustats.bops)); + seq_printf(s, "traps\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.traps), + (unsigned long)__this_cpu_read(mipsr2bdemustats.traps)); + seq_printf(s, "fpus\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.fpus), + (unsigned long)__this_cpu_read(mipsr2bdemustats.fpus)); + seq_printf(s, "loads\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.loads), + (unsigned long)__this_cpu_read(mipsr2bdemustats.loads)); + seq_printf(s, "stores\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.stores), + (unsigned long)__this_cpu_read(mipsr2bdemustats.stores)); + seq_printf(s, "llsc\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.llsc), + (unsigned long)__this_cpu_read(mipsr2bdemustats.llsc)); + seq_printf(s, "dsemul\t\t%ld\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2emustats.dsemul), + (unsigned long)__this_cpu_read(mipsr2bdemustats.dsemul)); + seq_printf(s, "jr\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.jrs)); + seq_printf(s, "bltzl\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bltzl)); + seq_printf(s, "bgezl\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bgezl)); + seq_printf(s, "bltzll\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bltzll)); + seq_printf(s, "bgezll\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bgezll)); + seq_printf(s, "bltzal\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bltzal)); + seq_printf(s, "bgezal\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bgezal)); + seq_printf(s, "beql\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.beql)); + seq_printf(s, "bnel\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bnel)); + seq_printf(s, "blezl\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.blezl)); + seq_printf(s, "bgtzl\t\t%ld\n", + (unsigned long)__this_cpu_read(mipsr2bremustats.bgtzl)); + + return 0; +} + +static int mipsr2_clear_show(struct seq_file *s, void *unused) +{ + mipsr2_emul_show(s, unused); + + __this_cpu_write((mipsr2emustats).movs, 0); + __this_cpu_write((mipsr2bdemustats).movs, 0); + __this_cpu_write((mipsr2emustats).hilo, 0); + __this_cpu_write((mipsr2bdemustats).hilo, 0); + __this_cpu_write((mipsr2emustats).muls, 0); + __this_cpu_write((mipsr2bdemustats).muls, 0); + __this_cpu_write((mipsr2emustats).divs, 0); + __this_cpu_write((mipsr2bdemustats).divs, 0); + __this_cpu_write((mipsr2emustats).dsps, 0); + __this_cpu_write((mipsr2bdemustats).dsps, 0); + __this_cpu_write((mipsr2emustats).bops, 0); + __this_cpu_write((mipsr2bdemustats).bops, 0); + __this_cpu_write((mipsr2emustats).traps, 0); + __this_cpu_write((mipsr2bdemustats).traps, 0); + __this_cpu_write((mipsr2emustats).fpus, 0); + __this_cpu_write((mipsr2bdemustats).fpus, 0); + __this_cpu_write((mipsr2emustats).loads, 0); + __this_cpu_write((mipsr2bdemustats).loads, 0); + __this_cpu_write((mipsr2emustats).stores, 0); + __this_cpu_write((mipsr2bdemustats).stores, 0); + __this_cpu_write((mipsr2emustats).llsc, 0); + __this_cpu_write((mipsr2bdemustats).llsc, 0); + __this_cpu_write((mipsr2emustats).dsemul, 0); + __this_cpu_write((mipsr2bdemustats).dsemul, 0); + __this_cpu_write((mipsr2bremustats).jrs, 0); + __this_cpu_write((mipsr2bremustats).bltzl, 0); + __this_cpu_write((mipsr2bremustats).bgezl, 0); + __this_cpu_write((mipsr2bremustats).bltzll, 0); + __this_cpu_write((mipsr2bremustats).bgezll, 0); + __this_cpu_write((mipsr2bremustats).bltzall, 0); + __this_cpu_write((mipsr2bremustats).bgezall, 0); + __this_cpu_write((mipsr2bremustats).bltzal, 0); + __this_cpu_write((mipsr2bremustats).bgezal, 0); + __this_cpu_write((mipsr2bremustats).beql, 0); + __this_cpu_write((mipsr2bremustats).bnel, 0); + __this_cpu_write((mipsr2bremustats).blezl, 0); + __this_cpu_write((mipsr2bremustats).bgtzl, 0); + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(mipsr2_emul); +DEFINE_SHOW_ATTRIBUTE(mipsr2_clear); + +static int __init mipsr2_init_debugfs(void) +{ + debugfs_create_file("r2_emul_stats", S_IRUGO, mips_debugfs_dir, NULL, + &mipsr2_emul_fops); + debugfs_create_file("r2_emul_stats_clear", S_IRUGO, mips_debugfs_dir, + NULL, &mipsr2_clear_fops); + return 0; +} + +device_initcall(mipsr2_init_debugfs); + +#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c new file mode 100644 index 000000000..3c0c3d126 --- /dev/null +++ b/arch/mips/kernel/module.c @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Copyright (C) 2001 Rusty Russell. + * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2005 Thiemo Seufer + */ + +#undef DEBUG + +#include <linux/extable.h> +#include <linux/moduleloader.h> +#include <linux/elf.h> +#include <linux/mm.h> +#include <linux/numa.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/jump_label.h> + + +struct mips_hi16 { + struct mips_hi16 *next; + Elf_Addr *addr; + Elf_Addr value; +}; + +static LIST_HEAD(dbe_list); +static DEFINE_SPINLOCK(dbe_lock); + +#ifdef MODULE_START +void *module_alloc(unsigned long size) +{ + return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END, + GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE, + __builtin_return_address(0)); +} +#endif + +static int apply_r_mips_none(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + return 0; +} + +static int apply_r_mips_32(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + *location = base + v; + + return 0; +} + +static int apply_r_mips_26(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + if (v % 4) { + pr_err("module %s: dangerous R_MIPS_26 relocation\n", + me->name); + return -ENOEXEC; + } + + if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + pr_err("module %s: relocation overflow\n", + me->name); + return -ENOEXEC; + } + + *location = (*location & ~0x03ffffff) | + ((base + (v >> 2)) & 0x03ffffff); + + return 0; +} + +static int apply_r_mips_hi16(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + struct mips_hi16 *n; + + if (rela) { + *location = (*location & 0xffff0000) | + ((((long long) v + 0x8000LL) >> 16) & 0xffff); + return 0; + } + + /* + * We cannot relocate this one now because we don't know the value of + * the carry we need to add. Save the information, and let LO16 do the + * actual relocation. + */ + n = kmalloc(sizeof *n, GFP_KERNEL); + if (!n) + return -ENOMEM; + + n->addr = (Elf_Addr *)location; + n->value = v; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; + + return 0; +} + +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + +static int apply_r_mips_lo16(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + unsigned long insnlo = base; + struct mips_hi16 *l; + Elf_Addr val, vallo; + + if (rela) { + *location = (*location & 0xffff0000) | (v & 0xffff); + return 0; + } + + /* Sign extend the addend we extract from the lo insn. */ + vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; + + if (me->arch.r_mips_hi16_list != NULL) { + l = me->arch.r_mips_hi16_list; + while (l != NULL) { + struct mips_hi16 *next; + unsigned long insn; + + /* + * The value for the HI16 had best be the same. + */ + if (v != l->value) + goto out_danger; + + /* + * Do the HI16 relocation. Note that we actually don't + * need to know anything about the LO16 itself, except + * where to find the low 16 bits of the addend needed + * by the LO16. + */ + insn = *l->addr; + val = ((insn & 0xffff) << 16) + vallo; + val += v; + + /* + * Account for the sign extension that will happen in + * the low bits. + */ + val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; + + insn = (insn & ~0xffff) | val; + *l->addr = insn; + + next = l->next; + kfree(l); + l = next; + } + + me->arch.r_mips_hi16_list = NULL; + } + + /* + * Ok, we're done with the HI16 relocs. Now deal with the LO16. + */ + val = v + vallo; + insnlo = (insnlo & ~0xffff) | (val & 0xffff); + *location = insnlo; + + return 0; + +out_danger: + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; + + pr_err("module %s: dangerous R_MIPS_LO16 relocation\n", me->name); + + return -ENOEXEC; +} + +static int apply_r_mips_pc(struct module *me, u32 *location, u32 base, + Elf_Addr v, unsigned int bits) +{ + unsigned long mask = GENMASK(bits - 1, 0); + unsigned long se_bits; + long offset; + + if (v % 4) { + pr_err("module %s: dangerous R_MIPS_PC%u relocation\n", + me->name, bits); + return -ENOEXEC; + } + + /* retrieve & sign extend implicit addend if any */ + offset = base & mask; + offset |= (offset & BIT(bits - 1)) ? ~mask : 0; + + offset += ((long)v - (long)location) >> 2; + + /* check the sign bit onwards are identical - ie. we didn't overflow */ + se_bits = (offset & BIT(bits - 1)) ? ~0ul : 0; + if ((offset & ~mask) != (se_bits & ~mask)) { + pr_err("module %s: relocation overflow\n", me->name); + return -ENOEXEC; + } + + *location = (*location & ~mask) | (offset & mask); + + return 0; +} + +static int apply_r_mips_pc16(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + return apply_r_mips_pc(me, location, base, v, 16); +} + +static int apply_r_mips_pc21(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + return apply_r_mips_pc(me, location, base, v, 21); +} + +static int apply_r_mips_pc26(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + return apply_r_mips_pc(me, location, base, v, 26); +} + +static int apply_r_mips_64(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + if (WARN_ON(!rela)) + return -EINVAL; + + *(Elf_Addr *)location = v; + + return 0; +} + +static int apply_r_mips_higher(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + if (WARN_ON(!rela)) + return -EINVAL; + + *location = (*location & 0xffff0000) | + ((((long long)v + 0x80008000LL) >> 32) & 0xffff); + + return 0; +} + +static int apply_r_mips_highest(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela) +{ + if (WARN_ON(!rela)) + return -EINVAL; + + *location = (*location & 0xffff0000) | + ((((long long)v + 0x800080008000LL) >> 48) & 0xffff); + + return 0; +} + +/** + * reloc_handler() - Apply a particular relocation to a module + * @me: the module to apply the reloc to + * @location: the address at which the reloc is to be applied + * @base: the existing value at location for REL-style; 0 for RELA-style + * @v: the value of the reloc, with addend for RELA-style + * + * Each implemented reloc_handler function applies a particular type of + * relocation to the module @me. Relocs that may be found in either REL or RELA + * variants can be handled by making use of the @base & @v parameters which are + * set to values which abstract the difference away from the particular reloc + * implementations. + * + * Return: 0 upon success, else -ERRNO + */ +typedef int (*reloc_handler)(struct module *me, u32 *location, + u32 base, Elf_Addr v, bool rela); + +/* The handlers for known reloc types */ +static reloc_handler reloc_handlers[] = { + [R_MIPS_NONE] = apply_r_mips_none, + [R_MIPS_32] = apply_r_mips_32, + [R_MIPS_26] = apply_r_mips_26, + [R_MIPS_HI16] = apply_r_mips_hi16, + [R_MIPS_LO16] = apply_r_mips_lo16, + [R_MIPS_PC16] = apply_r_mips_pc16, + [R_MIPS_64] = apply_r_mips_64, + [R_MIPS_HIGHER] = apply_r_mips_higher, + [R_MIPS_HIGHEST] = apply_r_mips_highest, + [R_MIPS_PC21_S2] = apply_r_mips_pc21, + [R_MIPS_PC26_S2] = apply_r_mips_pc26, +}; + +static int __apply_relocate(Elf_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, + struct module *me, bool rela) +{ + union { + Elf_Mips_Rel *rel; + Elf_Mips_Rela *rela; + } r; + reloc_handler handler; + Elf_Sym *sym; + u32 *location, base; + unsigned int i, type; + Elf_Addr v; + int err = 0; + size_t reloc_sz; + + pr_debug("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + + r.rel = (void *)sechdrs[relsec].sh_addr; + reloc_sz = rela ? sizeof(*r.rela) : sizeof(*r.rel); + me->arch.r_mips_hi16_list = NULL; + for (i = 0; i < sechdrs[relsec].sh_size / reloc_sz; i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + r.rel->r_offset; + /* This is the symbol it is referring to */ + sym = (Elf_Sym *)sechdrs[symindex].sh_addr + + ELF_MIPS_R_SYM(*r.rel); + if (sym->st_value >= -MAX_ERRNO) { + /* Ignore unresolved weak symbol */ + if (ELF_ST_BIND(sym->st_info) == STB_WEAK) + continue; + pr_warn("%s: Unknown symbol %s\n", + me->name, strtab + sym->st_name); + err = -ENOENT; + goto out; + } + + type = ELF_MIPS_R_TYPE(*r.rel); + if (type < ARRAY_SIZE(reloc_handlers)) + handler = reloc_handlers[type]; + else + handler = NULL; + + if (!handler) { + pr_err("%s: Unknown relocation type %u\n", + me->name, type); + err = -EINVAL; + goto out; + } + + if (rela) { + v = sym->st_value + r.rela->r_addend; + base = 0; + r.rela = &r.rela[1]; + } else { + v = sym->st_value; + base = *location; + r.rel = &r.rel[1]; + } + + err = handler(me, location, base, v, rela); + if (err) + goto out; + } + +out: + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation, or if we hit + * an error processing a reloc we might have gotten here before + * reaching the R_MIPS_LO16. In either case, free up the list and + * return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + err = err ?: -ENOEXEC; + } + + return err; +} + +int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, + struct module *me) +{ + return __apply_relocate(sechdrs, strtab, symindex, relsec, me, false); +} + +#ifdef CONFIG_MODULES_USE_ELF_RELA +int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab, + unsigned int symindex, unsigned int relsec, + struct module *me) +{ + return __apply_relocate(sechdrs, strtab, symindex, relsec, me, true); +} +#endif /* CONFIG_MODULES_USE_ELF_RELA */ + +/* Given an address, look for it in the module exception tables. */ +const struct exception_table_entry *search_module_dbetables(unsigned long addr) +{ + unsigned long flags; + const struct exception_table_entry *e = NULL; + struct mod_arch_specific *dbe; + + spin_lock_irqsave(&dbe_lock, flags); + list_for_each_entry(dbe, &dbe_list, dbe_list) { + e = search_extable(dbe->dbe_start, + dbe->dbe_end - dbe->dbe_start, addr); + if (e) + break; + } + spin_unlock_irqrestore(&dbe_lock, flags); + + /* Now, if we found one, we are running inside it now, hence + we cannot unload the module, hence no refcnt needed. */ + return e; +} + +/* Put in dbe list if necessary. */ +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + struct module *me) +{ + const Elf_Shdr *s; + char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + + /* Make jump label nops. */ + jump_label_apply_nops(me); + + INIT_LIST_HEAD(&me->arch.dbe_list); + for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { + if (strcmp("__dbe_table", secstrings + s->sh_name) != 0) + continue; + me->arch.dbe_start = (void *)s->sh_addr; + me->arch.dbe_end = (void *)s->sh_addr + s->sh_size; + spin_lock_irq(&dbe_lock); + list_add(&me->arch.dbe_list, &dbe_list); + spin_unlock_irq(&dbe_lock); + } + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + spin_lock_irq(&dbe_lock); + list_del(&mod->arch.dbe_list); + spin_unlock_irq(&dbe_lock); +} diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S new file mode 100644 index 000000000..896080b44 --- /dev/null +++ b/arch/mips/kernel/octeon_switch.S @@ -0,0 +1,554 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * Copyright (C) 1994, 1995, 1996, by Andreas Busse + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2000 MIPS Technologies, Inc. + * written by Carsten Langgaard, carstenl@mips.com + */ +#include <asm/asm.h> +#include <asm/export.h> +#include <asm/asm-offsets.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + +/* + * task_struct *resume(task_struct *prev, task_struct *next, + * struct thread_info *next_ti) + */ + .align 7 + LEAF(resume) + .set arch=octeon + mfc0 t1, CP0_STATUS + LONG_S t1, THREAD_STATUS(a0) + cpu_save_nonscratch a0 + LONG_S ra, THREAD_REG31(a0) + +#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0 + /* Check if we need to store CVMSEG state */ + dmfc0 t0, $11,7 /* CvmMemCtl */ + bbit0 t0, 6, 3f /* Is user access enabled? */ + + /* Store the CVMSEG state */ + /* Extract the size of CVMSEG */ + andi t0, 0x3f + /* Multiply * (cache line size/sizeof(long)/2) */ + sll t0, 7-LONGLOG-1 + li t1, -32768 /* Base address of CVMSEG */ + LONG_ADDI t2, a0, THREAD_CVMSEG /* Where to store CVMSEG to */ + synciobdma +2: + .set noreorder + LONG_L t8, 0(t1) /* Load from CVMSEG */ + subu t0, 1 /* Decrement loop var */ + LONG_L t9, LONGSIZE(t1)/* Load from CVMSEG */ + LONG_ADDU t1, LONGSIZE*2 /* Increment loc in CVMSEG */ + LONG_S t8, 0(t2) /* Store CVMSEG to thread storage */ + LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */ + bnez t0, 2b /* Loop until we've copied it all */ + LONG_S t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */ + .set reorder + + /* Disable access to CVMSEG */ + dmfc0 t0, $11,7 /* CvmMemCtl */ + xori t0, t0, 0x40 /* Bit 6 is CVMSEG user enable */ + dmtc0 t0, $11,7 /* CvmMemCtl */ +#endif +3: + +#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) + PTR_LA t8, __stack_chk_guard + LONG_L t9, TASK_STACK_CANARY(a1) + LONG_S t9, 0(t8) +#endif + + /* + * The order of restoring the registers takes care of the race + * updating $28, $29 and kernelsp without disabling ints. + */ + move $28, a2 + cpu_restore_nonscratch a1 + + PTR_ADDU t0, $28, _THREAD_SIZE - 32 + set_saved_sp t0, t1, t2 + + mfc0 t1, CP0_STATUS /* Do we really need this? */ + li a3, 0xff01 + and t1, a3 + LONG_L a2, THREAD_STATUS(a1) + nor a3, $0, a3 + and a2, a3 + or a2, t1 + mtc0 a2, CP0_STATUS + move v0, a0 + jr ra + END(resume) + +/* + * void octeon_cop2_save(struct octeon_cop2_state *a0) + */ + .align 7 + .set push + .set noreorder + LEAF(octeon_cop2_save) + + dmfc0 t9, $9,7 /* CvmCtl register. */ + + /* Save the COP2 CRC state */ + dmfc2 t0, 0x0201 + dmfc2 t1, 0x0202 + dmfc2 t2, 0x0200 + sd t0, OCTEON_CP2_CRC_IV(a0) + sd t1, OCTEON_CP2_CRC_LENGTH(a0) + /* Skip next instructions if CvmCtl[NODFA_CP2] set */ + bbit1 t9, 28, 1f + sd t2, OCTEON_CP2_CRC_POLY(a0) + + /* Save the LLM state */ + dmfc2 t0, 0x0402 + dmfc2 t1, 0x040A + sd t0, OCTEON_CP2_LLM_DAT(a0) + +1: bbit1 t9, 26, 3f /* done if CvmCtl[NOCRYPTO] set */ + sd t1, OCTEON_CP2_LLM_DAT+8(a0) + + /* Save the COP2 crypto state */ + /* this part is mostly common to both pass 1 and later revisions */ + dmfc2 t0, 0x0084 + dmfc2 t1, 0x0080 + dmfc2 t2, 0x0081 + dmfc2 t3, 0x0082 + sd t0, OCTEON_CP2_3DES_IV(a0) + dmfc2 t0, 0x0088 + sd t1, OCTEON_CP2_3DES_KEY(a0) + dmfc2 t1, 0x0111 /* only necessary for pass 1 */ + sd t2, OCTEON_CP2_3DES_KEY+8(a0) + dmfc2 t2, 0x0102 + sd t3, OCTEON_CP2_3DES_KEY+16(a0) + dmfc2 t3, 0x0103 + sd t0, OCTEON_CP2_3DES_RESULT(a0) + dmfc2 t0, 0x0104 + sd t1, OCTEON_CP2_AES_INP0(a0) /* only necessary for pass 1 */ + dmfc2 t1, 0x0105 + sd t2, OCTEON_CP2_AES_IV(a0) + dmfc2 t2, 0x0106 + sd t3, OCTEON_CP2_AES_IV+8(a0) + dmfc2 t3, 0x0107 + sd t0, OCTEON_CP2_AES_KEY(a0) + dmfc2 t0, 0x0110 + sd t1, OCTEON_CP2_AES_KEY+8(a0) + dmfc2 t1, 0x0100 + sd t2, OCTEON_CP2_AES_KEY+16(a0) + dmfc2 t2, 0x0101 + sd t3, OCTEON_CP2_AES_KEY+24(a0) + mfc0 v0, $15,0 /* Get the processor ID register */ + sd t0, OCTEON_CP2_AES_KEYLEN(a0) + li v1, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ + sd t1, OCTEON_CP2_AES_RESULT(a0) + /* Skip to the Pass1 version of the remainder of the COP2 state */ + beq v0, v1, 2f + sd t2, OCTEON_CP2_AES_RESULT+8(a0) + + /* the non-pass1 state when !CvmCtl[NOCRYPTO] */ + dmfc2 t1, 0x0240 + dmfc2 t2, 0x0241 + ori v1, v1, 0x9500 /* lowest OCTEON III PrId*/ + dmfc2 t3, 0x0242 + subu v1, v0, v1 /* prid - lowest OCTEON III PrId */ + dmfc2 t0, 0x0243 + sd t1, OCTEON_CP2_HSH_DATW(a0) + dmfc2 t1, 0x0244 + sd t2, OCTEON_CP2_HSH_DATW+8(a0) + dmfc2 t2, 0x0245 + sd t3, OCTEON_CP2_HSH_DATW+16(a0) + dmfc2 t3, 0x0246 + sd t0, OCTEON_CP2_HSH_DATW+24(a0) + dmfc2 t0, 0x0247 + sd t1, OCTEON_CP2_HSH_DATW+32(a0) + dmfc2 t1, 0x0248 + sd t2, OCTEON_CP2_HSH_DATW+40(a0) + dmfc2 t2, 0x0249 + sd t3, OCTEON_CP2_HSH_DATW+48(a0) + dmfc2 t3, 0x024A + sd t0, OCTEON_CP2_HSH_DATW+56(a0) + dmfc2 t0, 0x024B + sd t1, OCTEON_CP2_HSH_DATW+64(a0) + dmfc2 t1, 0x024C + sd t2, OCTEON_CP2_HSH_DATW+72(a0) + dmfc2 t2, 0x024D + sd t3, OCTEON_CP2_HSH_DATW+80(a0) + dmfc2 t3, 0x024E + sd t0, OCTEON_CP2_HSH_DATW+88(a0) + dmfc2 t0, 0x0250 + sd t1, OCTEON_CP2_HSH_DATW+96(a0) + dmfc2 t1, 0x0251 + sd t2, OCTEON_CP2_HSH_DATW+104(a0) + dmfc2 t2, 0x0252 + sd t3, OCTEON_CP2_HSH_DATW+112(a0) + dmfc2 t3, 0x0253 + sd t0, OCTEON_CP2_HSH_IVW(a0) + dmfc2 t0, 0x0254 + sd t1, OCTEON_CP2_HSH_IVW+8(a0) + dmfc2 t1, 0x0255 + sd t2, OCTEON_CP2_HSH_IVW+16(a0) + dmfc2 t2, 0x0256 + sd t3, OCTEON_CP2_HSH_IVW+24(a0) + dmfc2 t3, 0x0257 + sd t0, OCTEON_CP2_HSH_IVW+32(a0) + dmfc2 t0, 0x0258 + sd t1, OCTEON_CP2_HSH_IVW+40(a0) + dmfc2 t1, 0x0259 + sd t2, OCTEON_CP2_HSH_IVW+48(a0) + dmfc2 t2, 0x025E + sd t3, OCTEON_CP2_HSH_IVW+56(a0) + dmfc2 t3, 0x025A + sd t0, OCTEON_CP2_GFM_MULT(a0) + dmfc2 t0, 0x025B + sd t1, OCTEON_CP2_GFM_MULT+8(a0) + sd t2, OCTEON_CP2_GFM_POLY(a0) + sd t3, OCTEON_CP2_GFM_RESULT(a0) + bltz v1, 4f + sd t0, OCTEON_CP2_GFM_RESULT+8(a0) + /* OCTEON III things*/ + dmfc2 t0, 0x024F + dmfc2 t1, 0x0050 + sd t0, OCTEON_CP2_SHA3(a0) + sd t1, OCTEON_CP2_SHA3+8(a0) +4: + jr ra + nop + +2: /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */ + dmfc2 t3, 0x0040 + dmfc2 t0, 0x0041 + dmfc2 t1, 0x0042 + dmfc2 t2, 0x0043 + sd t3, OCTEON_CP2_HSH_DATW(a0) + dmfc2 t3, 0x0044 + sd t0, OCTEON_CP2_HSH_DATW+8(a0) + dmfc2 t0, 0x0045 + sd t1, OCTEON_CP2_HSH_DATW+16(a0) + dmfc2 t1, 0x0046 + sd t2, OCTEON_CP2_HSH_DATW+24(a0) + dmfc2 t2, 0x0048 + sd t3, OCTEON_CP2_HSH_DATW+32(a0) + dmfc2 t3, 0x0049 + sd t0, OCTEON_CP2_HSH_DATW+40(a0) + dmfc2 t0, 0x004A + sd t1, OCTEON_CP2_HSH_DATW+48(a0) + sd t2, OCTEON_CP2_HSH_IVW(a0) + sd t3, OCTEON_CP2_HSH_IVW+8(a0) + sd t0, OCTEON_CP2_HSH_IVW+16(a0) + +3: /* pass 1 or CvmCtl[NOCRYPTO] set */ + jr ra + nop + END(octeon_cop2_save) + .set pop + +/* + * void octeon_cop2_restore(struct octeon_cop2_state *a0) + */ + .align 7 + .set push + .set noreorder + LEAF(octeon_cop2_restore) + /* First cache line was prefetched before the call */ + pref 4, 128(a0) + dmfc0 t9, $9,7 /* CvmCtl register. */ + + pref 4, 256(a0) + ld t0, OCTEON_CP2_CRC_IV(a0) + pref 4, 384(a0) + ld t1, OCTEON_CP2_CRC_LENGTH(a0) + ld t2, OCTEON_CP2_CRC_POLY(a0) + + /* Restore the COP2 CRC state */ + dmtc2 t0, 0x0201 + dmtc2 t1, 0x1202 + bbit1 t9, 28, 2f /* Skip LLM if CvmCtl[NODFA_CP2] is set */ + dmtc2 t2, 0x4200 + + /* Restore the LLM state */ + ld t0, OCTEON_CP2_LLM_DAT(a0) + ld t1, OCTEON_CP2_LLM_DAT+8(a0) + dmtc2 t0, 0x0402 + dmtc2 t1, 0x040A + +2: + bbit1 t9, 26, done_restore /* done if CvmCtl[NOCRYPTO] set */ + nop + + /* Restore the COP2 crypto state common to pass 1 and pass 2 */ + ld t0, OCTEON_CP2_3DES_IV(a0) + ld t1, OCTEON_CP2_3DES_KEY(a0) + ld t2, OCTEON_CP2_3DES_KEY+8(a0) + dmtc2 t0, 0x0084 + ld t0, OCTEON_CP2_3DES_KEY+16(a0) + dmtc2 t1, 0x0080 + ld t1, OCTEON_CP2_3DES_RESULT(a0) + dmtc2 t2, 0x0081 + ld t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */ + dmtc2 t0, 0x0082 + ld t0, OCTEON_CP2_AES_IV(a0) + dmtc2 t1, 0x0098 + ld t1, OCTEON_CP2_AES_IV+8(a0) + dmtc2 t2, 0x010A /* only really needed for pass 1 */ + ld t2, OCTEON_CP2_AES_KEY(a0) + dmtc2 t0, 0x0102 + ld t0, OCTEON_CP2_AES_KEY+8(a0) + dmtc2 t1, 0x0103 + ld t1, OCTEON_CP2_AES_KEY+16(a0) + dmtc2 t2, 0x0104 + ld t2, OCTEON_CP2_AES_KEY+24(a0) + dmtc2 t0, 0x0105 + ld t0, OCTEON_CP2_AES_KEYLEN(a0) + dmtc2 t1, 0x0106 + ld t1, OCTEON_CP2_AES_RESULT(a0) + dmtc2 t2, 0x0107 + ld t2, OCTEON_CP2_AES_RESULT+8(a0) + mfc0 t3, $15,0 /* Get the processor ID register */ + dmtc2 t0, 0x0110 + li v0, 0x000d0000 /* This is the processor ID of Octeon Pass1 */ + dmtc2 t1, 0x0100 + bne v0, t3, 3f /* Skip the next stuff for non-pass1 */ + dmtc2 t2, 0x0101 + + /* this code is specific for pass 1 */ + ld t0, OCTEON_CP2_HSH_DATW(a0) + ld t1, OCTEON_CP2_HSH_DATW+8(a0) + ld t2, OCTEON_CP2_HSH_DATW+16(a0) + dmtc2 t0, 0x0040 + ld t0, OCTEON_CP2_HSH_DATW+24(a0) + dmtc2 t1, 0x0041 + ld t1, OCTEON_CP2_HSH_DATW+32(a0) + dmtc2 t2, 0x0042 + ld t2, OCTEON_CP2_HSH_DATW+40(a0) + dmtc2 t0, 0x0043 + ld t0, OCTEON_CP2_HSH_DATW+48(a0) + dmtc2 t1, 0x0044 + ld t1, OCTEON_CP2_HSH_IVW(a0) + dmtc2 t2, 0x0045 + ld t2, OCTEON_CP2_HSH_IVW+8(a0) + dmtc2 t0, 0x0046 + ld t0, OCTEON_CP2_HSH_IVW+16(a0) + dmtc2 t1, 0x0048 + dmtc2 t2, 0x0049 + b done_restore /* unconditional branch */ + dmtc2 t0, 0x004A + +3: /* this is post-pass1 code */ + ld t2, OCTEON_CP2_HSH_DATW(a0) + ori v0, v0, 0x9500 /* lowest OCTEON III PrId*/ + ld t0, OCTEON_CP2_HSH_DATW+8(a0) + ld t1, OCTEON_CP2_HSH_DATW+16(a0) + dmtc2 t2, 0x0240 + ld t2, OCTEON_CP2_HSH_DATW+24(a0) + dmtc2 t0, 0x0241 + ld t0, OCTEON_CP2_HSH_DATW+32(a0) + dmtc2 t1, 0x0242 + ld t1, OCTEON_CP2_HSH_DATW+40(a0) + dmtc2 t2, 0x0243 + ld t2, OCTEON_CP2_HSH_DATW+48(a0) + dmtc2 t0, 0x0244 + ld t0, OCTEON_CP2_HSH_DATW+56(a0) + dmtc2 t1, 0x0245 + ld t1, OCTEON_CP2_HSH_DATW+64(a0) + dmtc2 t2, 0x0246 + ld t2, OCTEON_CP2_HSH_DATW+72(a0) + dmtc2 t0, 0x0247 + ld t0, OCTEON_CP2_HSH_DATW+80(a0) + dmtc2 t1, 0x0248 + ld t1, OCTEON_CP2_HSH_DATW+88(a0) + dmtc2 t2, 0x0249 + ld t2, OCTEON_CP2_HSH_DATW+96(a0) + dmtc2 t0, 0x024A + ld t0, OCTEON_CP2_HSH_DATW+104(a0) + dmtc2 t1, 0x024B + ld t1, OCTEON_CP2_HSH_DATW+112(a0) + dmtc2 t2, 0x024C + ld t2, OCTEON_CP2_HSH_IVW(a0) + dmtc2 t0, 0x024D + ld t0, OCTEON_CP2_HSH_IVW+8(a0) + dmtc2 t1, 0x024E + ld t1, OCTEON_CP2_HSH_IVW+16(a0) + dmtc2 t2, 0x0250 + ld t2, OCTEON_CP2_HSH_IVW+24(a0) + dmtc2 t0, 0x0251 + ld t0, OCTEON_CP2_HSH_IVW+32(a0) + dmtc2 t1, 0x0252 + ld t1, OCTEON_CP2_HSH_IVW+40(a0) + dmtc2 t2, 0x0253 + ld t2, OCTEON_CP2_HSH_IVW+48(a0) + dmtc2 t0, 0x0254 + ld t0, OCTEON_CP2_HSH_IVW+56(a0) + dmtc2 t1, 0x0255 + ld t1, OCTEON_CP2_GFM_MULT(a0) + dmtc2 t2, 0x0256 + ld t2, OCTEON_CP2_GFM_MULT+8(a0) + dmtc2 t0, 0x0257 + ld t0, OCTEON_CP2_GFM_POLY(a0) + dmtc2 t1, 0x0258 + ld t1, OCTEON_CP2_GFM_RESULT(a0) + dmtc2 t2, 0x0259 + ld t2, OCTEON_CP2_GFM_RESULT+8(a0) + dmtc2 t0, 0x025E + subu v0, t3, v0 /* prid - lowest OCTEON III PrId */ + dmtc2 t1, 0x025A + bltz v0, done_restore + dmtc2 t2, 0x025B + /* OCTEON III things*/ + ld t0, OCTEON_CP2_SHA3(a0) + ld t1, OCTEON_CP2_SHA3+8(a0) + dmtc2 t0, 0x0051 + dmtc2 t1, 0x0050 +done_restore: + jr ra + nop + END(octeon_cop2_restore) + .set pop + +/* + * void octeon_mult_save() + * sp is assumed to point to a struct pt_regs + * + * NOTE: This is called in SAVE_TEMP in stackframe.h. It can + * safely modify v1,k0, k1,$10-$15, and $24. It will + * be overwritten with a processor specific version of the code. + */ + .p2align 7 + .set push + .set noreorder + LEAF(octeon_mult_save) + jr ra + nop + .space 30 * 4, 0 +octeon_mult_save_end: + EXPORT(octeon_mult_save_end) + END(octeon_mult_save) + + LEAF(octeon_mult_save2) + /* Save the multiplier state OCTEON II and earlier*/ + v3mulu k0, $0, $0 + v3mulu k1, $0, $0 + sd k0, PT_MTP(sp) /* PT_MTP has P0 */ + v3mulu k0, $0, $0 + sd k1, PT_MTP+8(sp) /* PT_MTP+8 has P1 */ + ori k1, $0, 1 + v3mulu k1, k1, $0 + sd k0, PT_MTP+16(sp) /* PT_MTP+16 has P2 */ + v3mulu k0, $0, $0 + sd k1, PT_MPL(sp) /* PT_MPL has MPL0 */ + v3mulu k1, $0, $0 + sd k0, PT_MPL+8(sp) /* PT_MPL+8 has MPL1 */ + jr ra + sd k1, PT_MPL+16(sp) /* PT_MPL+16 has MPL2 */ +octeon_mult_save2_end: + EXPORT(octeon_mult_save2_end) + END(octeon_mult_save2) + + LEAF(octeon_mult_save3) + /* Save the multiplier state OCTEON III */ + v3mulu $10, $0, $0 /* read P0 */ + v3mulu $11, $0, $0 /* read P1 */ + v3mulu $12, $0, $0 /* read P2 */ + sd $10, PT_MTP+(0*8)(sp) /* store P0 */ + v3mulu $10, $0, $0 /* read P3 */ + sd $11, PT_MTP+(1*8)(sp) /* store P1 */ + v3mulu $11, $0, $0 /* read P4 */ + sd $12, PT_MTP+(2*8)(sp) /* store P2 */ + ori $13, $0, 1 + v3mulu $12, $0, $0 /* read P5 */ + sd $10, PT_MTP+(3*8)(sp) /* store P3 */ + v3mulu $13, $13, $0 /* P4-P0 = MPL5-MPL1, $13 = MPL0 */ + sd $11, PT_MTP+(4*8)(sp) /* store P4 */ + v3mulu $10, $0, $0 /* read MPL1 */ + sd $12, PT_MTP+(5*8)(sp) /* store P5 */ + v3mulu $11, $0, $0 /* read MPL2 */ + sd $13, PT_MPL+(0*8)(sp) /* store MPL0 */ + v3mulu $12, $0, $0 /* read MPL3 */ + sd $10, PT_MPL+(1*8)(sp) /* store MPL1 */ + v3mulu $10, $0, $0 /* read MPL4 */ + sd $11, PT_MPL+(2*8)(sp) /* store MPL2 */ + v3mulu $11, $0, $0 /* read MPL5 */ + sd $12, PT_MPL+(3*8)(sp) /* store MPL3 */ + sd $10, PT_MPL+(4*8)(sp) /* store MPL4 */ + jr ra + sd $11, PT_MPL+(5*8)(sp) /* store MPL5 */ +octeon_mult_save3_end: + EXPORT(octeon_mult_save3_end) + END(octeon_mult_save3) + .set pop + +/* + * void octeon_mult_restore() + * sp is assumed to point to a struct pt_regs + * + * NOTE: This is called in RESTORE_TEMP in stackframe.h. + */ + .p2align 7 + .set push + .set noreorder + LEAF(octeon_mult_restore) + jr ra + nop + .space 30 * 4, 0 +octeon_mult_restore_end: + EXPORT(octeon_mult_restore_end) + END(octeon_mult_restore) + + LEAF(octeon_mult_restore2) + ld v0, PT_MPL(sp) /* MPL0 */ + ld v1, PT_MPL+8(sp) /* MPL1 */ + ld k0, PT_MPL+16(sp) /* MPL2 */ + /* Restore the multiplier state */ + ld k1, PT_MTP+16(sp) /* P2 */ + mtm0 v0 /* MPL0 */ + ld v0, PT_MTP+8(sp) /* P1 */ + mtm1 v1 /* MPL1 */ + ld v1, PT_MTP(sp) /* P0 */ + mtm2 k0 /* MPL2 */ + mtp2 k1 /* P2 */ + mtp1 v0 /* P1 */ + jr ra + mtp0 v1 /* P0 */ +octeon_mult_restore2_end: + EXPORT(octeon_mult_restore2_end) + END(octeon_mult_restore2) + + LEAF(octeon_mult_restore3) + ld $12, PT_MPL+(0*8)(sp) /* read MPL0 */ + ld $13, PT_MPL+(3*8)(sp) /* read MPL3 */ + ld $10, PT_MPL+(1*8)(sp) /* read MPL1 */ + ld $11, PT_MPL+(4*8)(sp) /* read MPL4 */ + .word 0x718d0008 + /* mtm0 $12, $13 restore MPL0 and MPL3 */ + ld $12, PT_MPL+(2*8)(sp) /* read MPL2 */ + .word 0x714b000c + /* mtm1 $10, $11 restore MPL1 and MPL4 */ + ld $13, PT_MPL+(5*8)(sp) /* read MPL5 */ + ld $10, PT_MTP+(0*8)(sp) /* read P0 */ + ld $11, PT_MTP+(3*8)(sp) /* read P3 */ + .word 0x718d000d + /* mtm2 $12, $13 restore MPL2 and MPL5 */ + ld $12, PT_MTP+(1*8)(sp) /* read P1 */ + .word 0x714b0009 + /* mtp0 $10, $11 restore P0 and P3 */ + ld $13, PT_MTP+(4*8)(sp) /* read P4 */ + ld $10, PT_MTP+(2*8)(sp) /* read P2 */ + ld $11, PT_MTP+(5*8)(sp) /* read P5 */ + .word 0x718d000a + /* mtp1 $12, $13 restore P1 and P4 */ + jr ra + .word 0x714b000b + /* mtp2 $10, $11 restore P2 and P5 */ + +octeon_mult_restore3_end: + EXPORT(octeon_mult_restore3_end) + END(octeon_mult_restore3) + .set pop diff --git a/arch/mips/kernel/perf_event.c b/arch/mips/kernel/perf_event.c new file mode 100644 index 000000000..5d7a9c039 --- /dev/null +++ b/arch/mips/kernel/perf_event.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Linux performance counter support for MIPS. + * + * Copyright (C) 2010 MIPS Technologies, Inc. + * Author: Deng-Cheng Zhu + * + * This code is based on the implementation for ARM, which is in turn + * based on the sparc64 perf event code and the x86 code. Performance + * counter access is based on the MIPS Oprofile code. And the callchain + * support references the code of MIPS stacktrace.c. + */ + +#include <linux/perf_event.h> +#include <linux/sched/task_stack.h> + +#include <asm/stacktrace.h> + +/* Callchain handling code. */ + +/* + * Leave userspace callchain empty for now. When we find a way to trace + * the user stack callchains, we will add it here. + */ + +static void save_raw_perf_callchain(struct perf_callchain_entry_ctx *entry, + unsigned long reg29) +{ + unsigned long *sp = (unsigned long *)reg29; + unsigned long addr; + + while (!kstack_end(sp)) { + addr = *sp++; + if (__kernel_text_address(addr)) { + perf_callchain_store(entry, addr); + if (entry->nr >= entry->max_stack) + break; + } + } +} + +void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, + struct pt_regs *regs) +{ + unsigned long sp = regs->regs[29]; +#ifdef CONFIG_KALLSYMS + unsigned long ra = regs->regs[31]; + unsigned long pc = regs->cp0_epc; + + if (raw_show_trace || !__kernel_text_address(pc)) { + unsigned long stack_page = + (unsigned long)task_stack_page(current); + if (stack_page && sp >= stack_page && + sp <= stack_page + THREAD_SIZE - 32) + save_raw_perf_callchain(entry, sp); + return; + } + do { + perf_callchain_store(entry, pc); + if (entry->nr >= entry->max_stack) + break; + pc = unwind_stack(current, &sp, pc, &ra); + } while (pc); +#else + save_raw_perf_callchain(entry, sp); +#endif +} diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c new file mode 100644 index 000000000..011eb6bbf --- /dev/null +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -0,0 +1,2138 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Linux performance counter support for MIPS. + * + * Copyright (C) 2010 MIPS Technologies, Inc. + * Copyright (C) 2011 Cavium Networks, Inc. + * Author: Deng-Cheng Zhu + * + * This code is based on the implementation for ARM, which is in turn + * based on the sparc64 perf event code and the x86 code. Performance + * counter access is based on the MIPS Oprofile code. And the callchain + * support references the code of MIPS stacktrace.c. + */ + +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/perf_event.h> +#include <linux/uaccess.h> + +#include <asm/irq.h> +#include <asm/irq_regs.h> +#include <asm/stacktrace.h> +#include <asm/time.h> /* For perf_irq */ + +#define MIPS_MAX_HWEVENTS 4 +#define MIPS_TCS_PER_COUNTER 2 +#define MIPS_CPUID_TO_COUNTER_MASK (MIPS_TCS_PER_COUNTER - 1) + +struct cpu_hw_events { + /* Array of events on this cpu. */ + struct perf_event *events[MIPS_MAX_HWEVENTS]; + + /* + * Set the bit (indexed by the counter number) when the counter + * is used for an event. + */ + unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)]; + + /* + * Software copy of the control register for each performance counter. + * MIPS CPUs vary in performance counters. They use this differently, + * and even may not use it. + */ + unsigned int saved_ctrl[MIPS_MAX_HWEVENTS]; +}; +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { + .saved_ctrl = {0}, +}; + +/* The description of MIPS performance events. */ +struct mips_perf_event { + unsigned int event_id; + /* + * MIPS performance counters are indexed starting from 0. + * CNTR_EVEN indicates the indexes of the counters to be used are + * even numbers. + */ + unsigned int cntr_mask; + #define CNTR_EVEN 0x55555555 + #define CNTR_ODD 0xaaaaaaaa + #define CNTR_ALL 0xffffffff + enum { + T = 0, + V = 1, + P = 2, + } range; +}; + +static struct mips_perf_event raw_event; +static DEFINE_MUTEX(raw_event_mutex); + +#define C(x) PERF_COUNT_HW_CACHE_##x + +struct mips_pmu { + u64 max_period; + u64 valid_count; + u64 overflow; + const char *name; + int irq; + u64 (*read_counter)(unsigned int idx); + void (*write_counter)(unsigned int idx, u64 val); + const struct mips_perf_event *(*map_raw_event)(u64 config); + const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX]; + const struct mips_perf_event (*cache_event_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + unsigned int num_counters; +}; + +static int counter_bits; +static struct mips_pmu mipspmu; + +#define M_PERFCTL_EVENT(event) (((event) << MIPS_PERFCTRL_EVENT_S) & \ + MIPS_PERFCTRL_EVENT) +#define M_PERFCTL_VPEID(vpe) ((vpe) << MIPS_PERFCTRL_VPEID_S) + +#ifdef CONFIG_CPU_BMIPS5000 +#define M_PERFCTL_MT_EN(filter) 0 +#else /* !CONFIG_CPU_BMIPS5000 */ +#define M_PERFCTL_MT_EN(filter) (filter) +#endif /* CONFIG_CPU_BMIPS5000 */ + +#define M_TC_EN_ALL M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_ALL) +#define M_TC_EN_VPE M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_VPE) +#define M_TC_EN_TC M_PERFCTL_MT_EN(MIPS_PERFCTRL_MT_EN_TC) + +#define M_PERFCTL_COUNT_EVENT_WHENEVER (MIPS_PERFCTRL_EXL | \ + MIPS_PERFCTRL_K | \ + MIPS_PERFCTRL_U | \ + MIPS_PERFCTRL_S | \ + MIPS_PERFCTRL_IE) + +#ifdef CONFIG_MIPS_MT_SMP +#define M_PERFCTL_CONFIG_MASK 0x3fff801f +#else +#define M_PERFCTL_CONFIG_MASK 0x1f +#endif + +#define CNTR_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) + +#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS +static DEFINE_RWLOCK(pmuint_rwlock); + +#if defined(CONFIG_CPU_BMIPS5000) +#define vpe_id() (cpu_has_mipsmt_pertccounters ? \ + 0 : (smp_processor_id() & MIPS_CPUID_TO_COUNTER_MASK)) +#else +#define vpe_id() (cpu_has_mipsmt_pertccounters ? \ + 0 : cpu_vpe_id(¤t_cpu_data)) +#endif + +/* Copied from op_model_mipsxx.c */ +static unsigned int vpe_shift(void) +{ + if (num_possible_cpus() > 1) + return 1; + + return 0; +} + +static unsigned int counters_total_to_per_cpu(unsigned int counters) +{ + return counters >> vpe_shift(); +} + +#else /* !CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */ +#define vpe_id() 0 + +#endif /* CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */ + +static void resume_local_counters(void); +static void pause_local_counters(void); +static irqreturn_t mipsxx_pmu_handle_irq(int, void *); +static int mipsxx_pmu_handle_shared_irq(void); + +/* 0: Not Loongson-3 + * 1: Loongson-3A1000/3B1000/3B1500 + * 2: Loongson-3A2000/3A3000 + * 3: Loongson-3A4000+ + */ + +#define LOONGSON_PMU_TYPE0 0 +#define LOONGSON_PMU_TYPE1 1 +#define LOONGSON_PMU_TYPE2 2 +#define LOONGSON_PMU_TYPE3 3 + +static inline int get_loongson3_pmu_type(void) +{ + if (boot_cpu_type() != CPU_LOONGSON64) + return LOONGSON_PMU_TYPE0; + if ((boot_cpu_data.processor_id & PRID_COMP_MASK) == PRID_COMP_LEGACY) + return LOONGSON_PMU_TYPE1; + if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64C) + return LOONGSON_PMU_TYPE2; + if ((boot_cpu_data.processor_id & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G) + return LOONGSON_PMU_TYPE3; + + return LOONGSON_PMU_TYPE0; +} + +static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx) +{ + if (vpe_id() == 1) + idx = (idx + 2) & 3; + return idx; +} + +static u64 mipsxx_pmu_read_counter(unsigned int idx) +{ + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + /* + * The counters are unsigned, we must cast to truncate + * off the high bits. + */ + return (u32)read_c0_perfcntr0(); + case 1: + return (u32)read_c0_perfcntr1(); + case 2: + return (u32)read_c0_perfcntr2(); + case 3: + return (u32)read_c0_perfcntr3(); + default: + WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); + return 0; + } +} + +static u64 mipsxx_pmu_read_counter_64(unsigned int idx) +{ + u64 mask = CNTR_BIT_MASK(counter_bits); + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + return read_c0_perfcntr0_64() & mask; + case 1: + return read_c0_perfcntr1_64() & mask; + case 2: + return read_c0_perfcntr2_64() & mask; + case 3: + return read_c0_perfcntr3_64() & mask; + default: + WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); + return 0; + } +} + +static void mipsxx_pmu_write_counter(unsigned int idx, u64 val) +{ + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + write_c0_perfcntr0(val); + return; + case 1: + write_c0_perfcntr1(val); + return; + case 2: + write_c0_perfcntr2(val); + return; + case 3: + write_c0_perfcntr3(val); + return; + } +} + +static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val) +{ + val &= CNTR_BIT_MASK(counter_bits); + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + write_c0_perfcntr0_64(val); + return; + case 1: + write_c0_perfcntr1_64(val); + return; + case 2: + write_c0_perfcntr2_64(val); + return; + case 3: + write_c0_perfcntr3_64(val); + return; + } +} + +static unsigned int mipsxx_pmu_read_control(unsigned int idx) +{ + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + return read_c0_perfctrl0(); + case 1: + return read_c0_perfctrl1(); + case 2: + return read_c0_perfctrl2(); + case 3: + return read_c0_perfctrl3(); + default: + WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); + return 0; + } +} + +static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val) +{ + idx = mipsxx_pmu_swizzle_perf_idx(idx); + + switch (idx) { + case 0: + write_c0_perfctrl0(val); + return; + case 1: + write_c0_perfctrl1(val); + return; + case 2: + write_c0_perfctrl2(val); + return; + case 3: + write_c0_perfctrl3(val); + return; + } +} + +static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc, + struct hw_perf_event *hwc) +{ + int i; + unsigned long cntr_mask; + + /* + * We only need to care the counter mask. The range has been + * checked definitely. + */ + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + cntr_mask = (hwc->event_base >> 10) & 0xffff; + else + cntr_mask = (hwc->event_base >> 8) & 0xffff; + + for (i = mipspmu.num_counters - 1; i >= 0; i--) { + /* + * Note that some MIPS perf events can be counted by both + * even and odd counters, wheresas many other are only by + * even _or_ odd counters. This introduces an issue that + * when the former kind of event takes the counter the + * latter kind of event wants to use, then the "counter + * allocation" for the latter event will fail. In fact if + * they can be dynamically swapped, they both feel happy. + * But here we leave this issue alone for now. + */ + if (test_bit(i, &cntr_mask) && + !test_and_set_bit(i, cpuc->used_mask)) + return i; + } + + return -EAGAIN; +} + +static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx) +{ + struct perf_event *event = container_of(evt, struct perf_event, hw); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + unsigned int range = evt->event_base >> 24; + + WARN_ON(idx < 0 || idx >= mipspmu.num_counters); + + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0x3ff) | + (evt->config_base & M_PERFCTL_CONFIG_MASK) | + /* Make sure interrupt enabled. */ + MIPS_PERFCTRL_IE; + else + cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | + (evt->config_base & M_PERFCTL_CONFIG_MASK) | + /* Make sure interrupt enabled. */ + MIPS_PERFCTRL_IE; + + if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) { + /* enable the counter for the calling thread */ + cpuc->saved_ctrl[idx] |= + (1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC; + } else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) { + /* The counter is processor wide. Set it up to count all TCs. */ + pr_debug("Enabling perf counter for all TCs\n"); + cpuc->saved_ctrl[idx] |= M_TC_EN_ALL; + } else { + unsigned int cpu, ctrl; + + /* + * Set up the counter for a particular CPU when event->cpu is + * a valid CPU number. Otherwise set up the counter for the CPU + * scheduling this thread. + */ + cpu = (event->cpu >= 0) ? event->cpu : smp_processor_id(); + + ctrl = M_PERFCTL_VPEID(cpu_vpe_id(&cpu_data[cpu])); + ctrl |= M_TC_EN_VPE; + cpuc->saved_ctrl[idx] |= ctrl; + pr_debug("Enabling perf counter for CPU%d\n", cpu); + } + /* + * We do not actually let the counter run. Leave it until start(). + */ +} + +static void mipsxx_pmu_disable_event(int idx) +{ + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + unsigned long flags; + + WARN_ON(idx < 0 || idx >= mipspmu.num_counters); + + local_irq_save(flags); + cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) & + ~M_PERFCTL_COUNT_EVENT_WHENEVER; + mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]); + local_irq_restore(flags); +} + +static int mipspmu_event_set_period(struct perf_event *event, + struct hw_perf_event *hwc, + int idx) +{ + u64 left = local64_read(&hwc->period_left); + u64 period = hwc->sample_period; + int ret = 0; + + if (unlikely((left + period) & (1ULL << 63))) { + /* left underflowed by more than period. */ + left = period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } else if (unlikely((left + period) <= period)) { + /* left underflowed by less than period. */ + left += period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + ret = 1; + } + + if (left > mipspmu.max_period) { + left = mipspmu.max_period; + local64_set(&hwc->period_left, left); + } + + local64_set(&hwc->prev_count, mipspmu.overflow - left); + + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + mipsxx_pmu_write_control(idx, + M_PERFCTL_EVENT(hwc->event_base & 0x3ff)); + + mipspmu.write_counter(idx, mipspmu.overflow - left); + + perf_event_update_userpage(event); + + return ret; +} + +static void mipspmu_event_update(struct perf_event *event, + struct hw_perf_event *hwc, + int idx) +{ + u64 prev_raw_count, new_raw_count; + u64 delta; + +again: + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = mipspmu.read_counter(idx); + + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + delta = new_raw_count - prev_raw_count; + + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); +} + +static void mipspmu_start(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); + + hwc->state = 0; + + /* Set the period for the event. */ + mipspmu_event_set_period(event, hwc, hwc->idx); + + /* Enable the event. */ + mipsxx_pmu_enable_event(hwc, hwc->idx); +} + +static void mipspmu_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + + if (!(hwc->state & PERF_HES_STOPPED)) { + /* We are working on a local event. */ + mipsxx_pmu_disable_event(hwc->idx); + barrier(); + mipspmu_event_update(event, hwc, hwc->idx); + hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; + } +} + +static int mipspmu_add(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx; + int err = 0; + + perf_pmu_disable(event->pmu); + + /* To look for a free counter for this event. */ + idx = mipsxx_pmu_alloc_counter(cpuc, hwc); + if (idx < 0) { + err = idx; + goto out; + } + + /* + * If there is an event in the counter we are going to use then + * make sure it is disabled. + */ + event->hw.idx = idx; + mipsxx_pmu_disable_event(idx); + cpuc->events[idx] = event; + + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; + if (flags & PERF_EF_START) + mipspmu_start(event, PERF_EF_RELOAD); + + /* Propagate our changes to the userspace mapping. */ + perf_event_update_userpage(event); + +out: + perf_pmu_enable(event->pmu); + return err; +} + +static void mipspmu_del(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + WARN_ON(idx < 0 || idx >= mipspmu.num_counters); + + mipspmu_stop(event, PERF_EF_UPDATE); + cpuc->events[idx] = NULL; + clear_bit(idx, cpuc->used_mask); + + perf_event_update_userpage(event); +} + +static void mipspmu_read(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + /* Don't read disabled counters! */ + if (hwc->idx < 0) + return; + + mipspmu_event_update(event, hwc, hwc->idx); +} + +static void mipspmu_enable(struct pmu *pmu) +{ +#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS + write_unlock(&pmuint_rwlock); +#endif + resume_local_counters(); +} + +/* + * MIPS performance counters can be per-TC. The control registers can + * not be directly accessed across CPUs. Hence if we want to do global + * control, we need cross CPU calls. on_each_cpu() can help us, but we + * can not make sure this function is called with interrupts enabled. So + * here we pause local counters and then grab a rwlock and leave the + * counters on other CPUs alone. If any counter interrupt raises while + * we own the write lock, simply pause local counters on that CPU and + * spin in the handler. Also we know we won't be switched to another + * CPU after pausing local counters and before grabbing the lock. + */ +static void mipspmu_disable(struct pmu *pmu) +{ + pause_local_counters(); +#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS + write_lock(&pmuint_rwlock); +#endif +} + +static atomic_t active_events = ATOMIC_INIT(0); +static DEFINE_MUTEX(pmu_reserve_mutex); +static int (*save_perf_irq)(void); + +static int mipspmu_get_irq(void) +{ + int err; + + if (mipspmu.irq >= 0) { + /* Request my own irq handler. */ + err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq, + IRQF_PERCPU | IRQF_NOBALANCING | + IRQF_NO_THREAD | IRQF_NO_SUSPEND | + IRQF_SHARED, + "mips_perf_pmu", &mipspmu); + if (err) { + pr_warn("Unable to request IRQ%d for MIPS performance counters!\n", + mipspmu.irq); + } + } else if (cp0_perfcount_irq < 0) { + /* + * We are sharing the irq number with the timer interrupt. + */ + save_perf_irq = perf_irq; + perf_irq = mipsxx_pmu_handle_shared_irq; + err = 0; + } else { + pr_warn("The platform hasn't properly defined its interrupt controller\n"); + err = -ENOENT; + } + + return err; +} + +static void mipspmu_free_irq(void) +{ + if (mipspmu.irq >= 0) + free_irq(mipspmu.irq, &mipspmu); + else if (cp0_perfcount_irq < 0) + perf_irq = save_perf_irq; +} + +/* + * mipsxx/rm9000/loongson2 have different performance counters, they have + * specific low-level init routines. + */ +static void reset_counters(void *arg); +static int __hw_perf_event_init(struct perf_event *event); + +static void hw_perf_event_destroy(struct perf_event *event) +{ + if (atomic_dec_and_mutex_lock(&active_events, + &pmu_reserve_mutex)) { + /* + * We must not call the destroy function with interrupts + * disabled. + */ + on_each_cpu(reset_counters, + (void *)(long)mipspmu.num_counters, 1); + mipspmu_free_irq(); + mutex_unlock(&pmu_reserve_mutex); + } +} + +static int mipspmu_event_init(struct perf_event *event) +{ + int err = 0; + + /* does not support taken branch sampling */ + if (has_branch_stack(event)) + return -EOPNOTSUPP; + + switch (event->attr.type) { + case PERF_TYPE_RAW: + case PERF_TYPE_HARDWARE: + case PERF_TYPE_HW_CACHE: + break; + + default: + return -ENOENT; + } + + if (event->cpu >= 0 && !cpu_online(event->cpu)) + return -ENODEV; + + if (!atomic_inc_not_zero(&active_events)) { + mutex_lock(&pmu_reserve_mutex); + if (atomic_read(&active_events) == 0) + err = mipspmu_get_irq(); + + if (!err) + atomic_inc(&active_events); + mutex_unlock(&pmu_reserve_mutex); + } + + if (err) + return err; + + return __hw_perf_event_init(event); +} + +static struct pmu pmu = { + .pmu_enable = mipspmu_enable, + .pmu_disable = mipspmu_disable, + .event_init = mipspmu_event_init, + .add = mipspmu_add, + .del = mipspmu_del, + .start = mipspmu_start, + .stop = mipspmu_stop, + .read = mipspmu_read, +}; + +static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev) +{ +/* + * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for + * event_id. + */ +#ifdef CONFIG_MIPS_MT_SMP + if (num_possible_cpus() > 1) + return ((unsigned int)pev->range << 24) | + (pev->cntr_mask & 0xffff00) | + (pev->event_id & 0xff); + else +#endif /* CONFIG_MIPS_MT_SMP */ + { + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) + return (pev->cntr_mask & 0xfffc00) | + (pev->event_id & 0x3ff); + else + return (pev->cntr_mask & 0xffff00) | + (pev->event_id & 0xff); + } +} + +static const struct mips_perf_event *mipspmu_map_general_event(int idx) +{ + + if ((*mipspmu.general_event_map)[idx].cntr_mask == 0) + return ERR_PTR(-EOPNOTSUPP); + return &(*mipspmu.general_event_map)[idx]; +} + +static const struct mips_perf_event *mipspmu_map_cache_event(u64 config) +{ + unsigned int cache_type, cache_op, cache_result; + const struct mips_perf_event *pev; + + cache_type = (config >> 0) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return ERR_PTR(-EINVAL); + + cache_op = (config >> 8) & 0xff; + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) + return ERR_PTR(-EINVAL); + + cache_result = (config >> 16) & 0xff; + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return ERR_PTR(-EINVAL); + + pev = &((*mipspmu.cache_event_map) + [cache_type] + [cache_op] + [cache_result]); + + if (pev->cntr_mask == 0) + return ERR_PTR(-EOPNOTSUPP); + + return pev; + +} + +static int validate_group(struct perf_event *event) +{ + struct perf_event *sibling, *leader = event->group_leader; + struct cpu_hw_events fake_cpuc; + + memset(&fake_cpuc, 0, sizeof(fake_cpuc)); + + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0) + return -EINVAL; + + for_each_sibling_event(sibling, leader) { + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0) + return -EINVAL; + } + + if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0) + return -EINVAL; + + return 0; +} + +/* This is needed by specific irq handlers in perf_event_*.c */ +static void handle_associated_event(struct cpu_hw_events *cpuc, + int idx, struct perf_sample_data *data, + struct pt_regs *regs) +{ + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc = &event->hw; + + mipspmu_event_update(event, hwc, idx); + data->period = event->hw.last_period; + if (!mipspmu_event_set_period(event, hwc, idx)) + return; + + if (perf_event_overflow(event, data, regs)) + mipsxx_pmu_disable_event(idx); +} + + +static int __n_counters(void) +{ + if (!cpu_has_perf) + return 0; + if (!(read_c0_perfctrl0() & MIPS_PERFCTRL_M)) + return 1; + if (!(read_c0_perfctrl1() & MIPS_PERFCTRL_M)) + return 2; + if (!(read_c0_perfctrl2() & MIPS_PERFCTRL_M)) + return 3; + + return 4; +} + +static int n_counters(void) +{ + int counters; + + switch (current_cpu_type()) { + case CPU_R10000: + counters = 2; + break; + + case CPU_R12000: + case CPU_R14000: + case CPU_R16000: + counters = 4; + break; + + default: + counters = __n_counters(); + } + + return counters; +} + +static void loongson3_reset_counters(void *arg) +{ + int counters = (int)(long)arg; + + switch (counters) { + case 4: + mipsxx_pmu_write_control(3, 0); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 127<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 191<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 255<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 319<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 383<<5); + mipspmu.write_counter(3, 0); + mipsxx_pmu_write_control(3, 575<<5); + mipspmu.write_counter(3, 0); + fallthrough; + case 3: + mipsxx_pmu_write_control(2, 0); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 127<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 191<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 255<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 319<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 383<<5); + mipspmu.write_counter(2, 0); + mipsxx_pmu_write_control(2, 575<<5); + mipspmu.write_counter(2, 0); + fallthrough; + case 2: + mipsxx_pmu_write_control(1, 0); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 127<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 191<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 255<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 319<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 383<<5); + mipspmu.write_counter(1, 0); + mipsxx_pmu_write_control(1, 575<<5); + mipspmu.write_counter(1, 0); + fallthrough; + case 1: + mipsxx_pmu_write_control(0, 0); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 127<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 191<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 255<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 319<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 383<<5); + mipspmu.write_counter(0, 0); + mipsxx_pmu_write_control(0, 575<<5); + mipspmu.write_counter(0, 0); + break; + } +} + +static void reset_counters(void *arg) +{ + int counters = (int)(long)arg; + + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) { + loongson3_reset_counters(arg); + return; + } + + switch (counters) { + case 4: + mipsxx_pmu_write_control(3, 0); + mipspmu.write_counter(3, 0); + fallthrough; + case 3: + mipsxx_pmu_write_control(2, 0); + mipspmu.write_counter(2, 0); + fallthrough; + case 2: + mipsxx_pmu_write_control(1, 0); + mipspmu.write_counter(1, 0); + fallthrough; + case 1: + mipsxx_pmu_write_control(0, 0); + mipspmu.write_counter(0, 0); + break; + } +} + +/* 24K/34K/1004K/interAptiv/loongson1 cores share the same event map. */ +static const struct mips_perf_event mipsxxcore_event_map + [PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_EVEN, T }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T }, +}; + +/* 74K/proAptiv core has different branch event code. */ +static const struct mips_perf_event mipsxxcore_event_map2 + [PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x27, CNTR_EVEN, T }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T }, +}; + +static const struct mips_perf_event i6x00_event_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD }, + /* These only count dcache, not icache */ + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x45, CNTR_EVEN | CNTR_ODD }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x48, CNTR_EVEN | CNTR_ODD }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x15, CNTR_EVEN | CNTR_ODD }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x16, CNTR_EVEN | CNTR_ODD }, +}; + +static const struct mips_perf_event loongson3_event_map1[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD }, +}; + +static const struct mips_perf_event loongson3_event_map2[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x80, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x81, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x18, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x94, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x9c, CNTR_ALL }, +}; + +static const struct mips_perf_event loongson3_event_map3[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x1c, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x1d, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x08, CNTR_ALL }, +}; + +static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL }, + [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL }, + [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL }, +}; + +static const struct mips_perf_event bmips5000_event_map + [PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, T }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T }, +}; + +static const struct mips_perf_event xlp_event_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, + [PERF_COUNT_HW_INSTRUCTIONS] = { 0x18, CNTR_ALL }, /* PAPI_TOT_INS */ + [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */ + [PERF_COUNT_HW_CACHE_MISSES] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x1b, CNTR_ALL }, /* PAPI_BR_CN */ + [PERF_COUNT_HW_BRANCH_MISSES] = { 0x1c, CNTR_ALL }, /* PAPI_BR_MSP */ +}; + +/* 24K/34K/1004K/interAptiv/loongson1 cores share the same cache event map. */ +static const struct mips_perf_event mipsxxcore_cache_map + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0x14, CNTR_EVEN, T }, + /* + * Note that MIPS has only "hit" events countable for + * the prefetch operation. + */ + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P }, + [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P }, + [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, + }, +}, +}; + +/* 74K/proAptiv core has completely different cache event map. */ +static const struct mips_perf_event mipsxxcore_cache_map2 + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T }, + [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T }, + [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0x34, CNTR_EVEN, T }, + /* + * Note that MIPS has only "hit" events countable for + * the prefetch operation. + */ + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, + [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, + [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P }, + }, +}, +/* + * 74K core does not have specific DTLB events. proAptiv core has + * "speculative" DTLB events which are numbered 0x63 (even/odd) and + * not included here. One can use raw events if really needed. + */ +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T }, + }, +}, +}; + +static const struct mips_perf_event i6x00_cache_map + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x46, CNTR_EVEN | CNTR_ODD }, + [C(RESULT_MISS)] = { 0x49, CNTR_EVEN | CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x47, CNTR_EVEN | CNTR_ODD }, + [C(RESULT_MISS)] = { 0x4a, CNTR_EVEN | CNTR_ODD }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x84, CNTR_EVEN | CNTR_ODD }, + [C(RESULT_MISS)] = { 0x85, CNTR_EVEN | CNTR_ODD }, + }, +}, +[C(DTLB)] = { + /* Can't distinguish read & write */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x40, CNTR_EVEN | CNTR_ODD }, + [C(RESULT_MISS)] = { 0x41, CNTR_EVEN | CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x40, CNTR_EVEN | CNTR_ODD }, + [C(RESULT_MISS)] = { 0x41, CNTR_EVEN | CNTR_ODD }, + }, +}, +[C(BPU)] = { + /* Conditional branches / mispredicted */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x15, CNTR_EVEN | CNTR_ODD }, + [C(RESULT_MISS)] = { 0x16, CNTR_EVEN | CNTR_ODD }, + }, +}, +}; + +static const struct mips_perf_event loongson3_cache_map1 + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x04, CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x04, CNTR_ODD }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x04, CNTR_EVEN }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x04, CNTR_EVEN }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x09, CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x09, CNTR_ODD }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x0c, CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x0c, CNTR_ODD }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN }, + [C(RESULT_MISS)] = { 0x01, CNTR_ODD }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x01, CNTR_EVEN }, + [C(RESULT_MISS)] = { 0x01, CNTR_ODD }, + }, +}, +}; + +static const struct mips_perf_event loongson3_cache_map2 + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x156, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x155, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x153, CNTR_ALL }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x18, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x18, CNTR_ALL }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1b6, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x1b7, CNTR_ALL }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0x1bf, CNTR_ALL }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x92, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x92, CNTR_ALL }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x1a, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x1a, CNTR_ALL }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x94, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x9c, CNTR_ALL }, + }, +}, +}; + +static const struct mips_perf_event loongson3_cache_map3 + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1e, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x1f, CNTR_ALL }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0xaa, CNTR_ALL }, + [C(RESULT_MISS)] = { 0xa9, CNTR_ALL }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x1c, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x1d, CNTR_ALL }, + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x2e, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x2f, CNTR_ALL }, + }, +}, +[C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x14, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x1b, CNTR_ALL }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x1a, CNTR_ALL }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x02, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, + }, +}, +}; + +/* BMIPS5000 */ +static const struct mips_perf_event bmips5000_cache_map + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + /* + * Like some other architectures (e.g. ARM), the performance + * counters don't differentiate between read and write + * accesses/misses, so this isn't strictly correct, but it's the + * best we can do. Writes and reads get combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 12, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 12, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 12, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 12, CNTR_ODD, T }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 10, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T }, + [C(RESULT_MISS)] = { 10, CNTR_ODD, T }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 23, CNTR_EVEN, T }, + /* + * Note that MIPS has only "hit" events countable for + * the prefetch operation. + */ + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 28, CNTR_EVEN, P }, + [C(RESULT_MISS)] = { 28, CNTR_ODD, P }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 28, CNTR_EVEN, P }, + [C(RESULT_MISS)] = { 28, CNTR_ODD, P }, + }, +}, +[C(BPU)] = { + /* Using the same code for *HW_BRANCH* */ + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, + }, +}, +}; + +static const struct mips_perf_event octeon_cache_map + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x2b, CNTR_ALL }, + [C(RESULT_MISS)] = { 0x2e, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x30, CNTR_ALL }, + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x18, CNTR_ALL }, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = { 0x19, CNTR_ALL }, + }, +}, +[C(DTLB)] = { + /* + * Only general DTLB misses are counted use the same event for + * read and write. + */ + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x35, CNTR_ALL }, + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x35, CNTR_ALL }, + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x37, CNTR_ALL }, + }, +}, +}; + +static const struct mips_perf_event xlp_cache_map + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { +[C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x31, CNTR_ALL }, /* PAPI_L1_DCR */ + [C(RESULT_MISS)] = { 0x30, CNTR_ALL }, /* PAPI_L1_LDM */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x2f, CNTR_ALL }, /* PAPI_L1_DCW */ + [C(RESULT_MISS)] = { 0x2e, CNTR_ALL }, /* PAPI_L1_STM */ + }, +}, +[C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */ + [C(RESULT_MISS)] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */ + }, +}, +[C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = { 0x35, CNTR_ALL }, /* PAPI_L2_DCR */ + [C(RESULT_MISS)] = { 0x37, CNTR_ALL }, /* PAPI_L2_LDM */ + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = { 0x34, CNTR_ALL }, /* PAPI_L2_DCA */ + [C(RESULT_MISS)] = { 0x36, CNTR_ALL }, /* PAPI_L2_DCM */ + }, +}, +[C(DTLB)] = { + /* + * Only general DTLB misses are counted use the same event for + * read and write. + */ + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */ + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */ + }, +}, +[C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */ + }, + [C(OP_WRITE)] = { + [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */ + }, +}, +[C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_MISS)] = { 0x25, CNTR_ALL }, + }, +}, +}; + +static int __hw_perf_event_init(struct perf_event *event) +{ + struct perf_event_attr *attr = &event->attr; + struct hw_perf_event *hwc = &event->hw; + const struct mips_perf_event *pev; + int err; + + /* Returning MIPS event descriptor for generic perf event. */ + if (PERF_TYPE_HARDWARE == event->attr.type) { + if (event->attr.config >= PERF_COUNT_HW_MAX) + return -EINVAL; + pev = mipspmu_map_general_event(event->attr.config); + } else if (PERF_TYPE_HW_CACHE == event->attr.type) { + pev = mipspmu_map_cache_event(event->attr.config); + } else if (PERF_TYPE_RAW == event->attr.type) { + /* We are working on the global raw event. */ + mutex_lock(&raw_event_mutex); + pev = mipspmu.map_raw_event(event->attr.config); + } else { + /* The event type is not (yet) supported. */ + return -EOPNOTSUPP; + } + + if (IS_ERR(pev)) { + if (PERF_TYPE_RAW == event->attr.type) + mutex_unlock(&raw_event_mutex); + return PTR_ERR(pev); + } + + /* + * We allow max flexibility on how each individual counter shared + * by the single CPU operates (the mode exclusion and the range). + */ + hwc->config_base = MIPS_PERFCTRL_IE; + + hwc->event_base = mipspmu_perf_event_encode(pev); + if (PERF_TYPE_RAW == event->attr.type) + mutex_unlock(&raw_event_mutex); + + if (!attr->exclude_user) + hwc->config_base |= MIPS_PERFCTRL_U; + if (!attr->exclude_kernel) { + hwc->config_base |= MIPS_PERFCTRL_K; + /* MIPS kernel mode: KSU == 00b || EXL == 1 || ERL == 1 */ + hwc->config_base |= MIPS_PERFCTRL_EXL; + } + if (!attr->exclude_hv) + hwc->config_base |= MIPS_PERFCTRL_S; + + hwc->config_base &= M_PERFCTL_CONFIG_MASK; + /* + * The event can belong to another cpu. We do not assign a local + * counter for it for now. + */ + hwc->idx = -1; + hwc->config = 0; + + if (!hwc->sample_period) { + hwc->sample_period = mipspmu.max_period; + hwc->last_period = hwc->sample_period; + local64_set(&hwc->period_left, hwc->sample_period); + } + + err = 0; + if (event->group_leader != event) + err = validate_group(event); + + event->destroy = hw_perf_event_destroy; + + if (err) + event->destroy(event); + + return err; +} + +static void pause_local_counters(void) +{ + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + int ctr = mipspmu.num_counters; + unsigned long flags; + + local_irq_save(flags); + do { + ctr--; + cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr); + mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] & + ~M_PERFCTL_COUNT_EVENT_WHENEVER); + } while (ctr > 0); + local_irq_restore(flags); +} + +static void resume_local_counters(void) +{ + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + int ctr = mipspmu.num_counters; + + do { + ctr--; + mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]); + } while (ctr > 0); +} + +static int mipsxx_pmu_handle_shared_irq(void) +{ + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); + struct perf_sample_data data; + unsigned int counters = mipspmu.num_counters; + u64 counter; + int n, handled = IRQ_NONE; + struct pt_regs *regs; + + if (cpu_has_perf_cntr_intr_bit && !(read_c0_cause() & CAUSEF_PCI)) + return handled; + /* + * First we pause the local counters, so that when we are locked + * here, the counters are all paused. When it gets locked due to + * perf_disable(), the timer interrupt handler will be delayed. + * + * See also mipsxx_pmu_start(). + */ + pause_local_counters(); +#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS + read_lock(&pmuint_rwlock); +#endif + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0, 0); + + for (n = counters - 1; n >= 0; n--) { + if (!test_bit(n, cpuc->used_mask)) + continue; + + counter = mipspmu.read_counter(n); + if (!(counter & mipspmu.overflow)) + continue; + + handle_associated_event(cpuc, n, &data, regs); + handled = IRQ_HANDLED; + } + +#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS + read_unlock(&pmuint_rwlock); +#endif + resume_local_counters(); + + /* + * Do all the work for the pending perf events. We can do this + * in here because the performance counter interrupt is a regular + * interrupt, not NMI. + */ + if (handled == IRQ_HANDLED) + irq_work_run(); + + return handled; +} + +static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) +{ + return mipsxx_pmu_handle_shared_irq(); +} + +/* 24K */ +#define IS_BOTH_COUNTERS_24K_EVENT(b) \ + ((b) == 0 || (b) == 1 || (b) == 11) + +/* 34K */ +#define IS_BOTH_COUNTERS_34K_EVENT(b) \ + ((b) == 0 || (b) == 1 || (b) == 11) +#ifdef CONFIG_MIPS_MT_SMP +#define IS_RANGE_P_34K_EVENT(r, b) \ + ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ + (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 || \ + (r) == 176 || ((b) >= 50 && (b) <= 55) || \ + ((b) >= 64 && (b) <= 67)) +#define IS_RANGE_V_34K_EVENT(r) ((r) == 47) +#endif + +/* 74K */ +#define IS_BOTH_COUNTERS_74K_EVENT(b) \ + ((b) == 0 || (b) == 1) + +/* proAptiv */ +#define IS_BOTH_COUNTERS_PROAPTIV_EVENT(b) \ + ((b) == 0 || (b) == 1) +/* P5600 */ +#define IS_BOTH_COUNTERS_P5600_EVENT(b) \ + ((b) == 0 || (b) == 1) + +/* 1004K */ +#define IS_BOTH_COUNTERS_1004K_EVENT(b) \ + ((b) == 0 || (b) == 1 || (b) == 11) +#ifdef CONFIG_MIPS_MT_SMP +#define IS_RANGE_P_1004K_EVENT(r, b) \ + ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ + (b) == 25 || (b) == 36 || (b) == 39 || (r) == 44 || \ + (r) == 174 || (r) == 176 || ((b) >= 50 && (b) <= 59) || \ + (r) == 188 || (b) == 61 || (b) == 62 || \ + ((b) >= 64 && (b) <= 67)) +#define IS_RANGE_V_1004K_EVENT(r) ((r) == 47) +#endif + +/* interAptiv */ +#define IS_BOTH_COUNTERS_INTERAPTIV_EVENT(b) \ + ((b) == 0 || (b) == 1 || (b) == 11) +#ifdef CONFIG_MIPS_MT_SMP +/* The P/V/T info is not provided for "(b) == 38" in SUM, assume P. */ +#define IS_RANGE_P_INTERAPTIV_EVENT(r, b) \ + ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ + (b) == 25 || (b) == 36 || (b) == 38 || (b) == 39 || \ + (r) == 44 || (r) == 174 || (r) == 176 || ((b) >= 50 && \ + (b) <= 59) || (r) == 188 || (b) == 61 || (b) == 62 || \ + ((b) >= 64 && (b) <= 67)) +#define IS_RANGE_V_INTERAPTIV_EVENT(r) ((r) == 47 || (r) == 175) +#endif + +/* BMIPS5000 */ +#define IS_BOTH_COUNTERS_BMIPS5000_EVENT(b) \ + ((b) == 0 || (b) == 1) + + +/* + * For most cores the user can use 0-255 raw events, where 0-127 for the events + * of even counters, and 128-255 for odd counters. Note that bit 7 is used to + * indicate the even/odd bank selector. So, for example, when user wants to take + * the Event Num of 15 for odd counters (by referring to the user manual), then + * 128 needs to be added to 15 as the input for the event config, i.e., 143 (0x8F) + * to be used. + * + * Some newer cores have even more events, in which case the user can use raw + * events 0-511, where 0-255 are for the events of even counters, and 256-511 + * are for odd counters, so bit 8 is used to indicate the even/odd bank selector. + */ +static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) +{ + /* currently most cores have 7-bit event numbers */ + int pmu_type; + unsigned int raw_id = config & 0xff; + unsigned int base_id = raw_id & 0x7f; + + switch (current_cpu_type()) { + case CPU_24K: + if (IS_BOTH_COUNTERS_24K_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + /* + * This is actually doing nothing. Non-multithreading + * CPUs will not check and calculate the range. + */ + raw_event.range = P; +#endif + break; + case CPU_34K: + if (IS_BOTH_COUNTERS_34K_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + if (IS_RANGE_P_34K_EVENT(raw_id, base_id)) + raw_event.range = P; + else if (unlikely(IS_RANGE_V_34K_EVENT(raw_id))) + raw_event.range = V; + else + raw_event.range = T; +#endif + break; + case CPU_74K: + case CPU_1074K: + if (IS_BOTH_COUNTERS_74K_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + raw_event.range = P; +#endif + break; + case CPU_PROAPTIV: + if (IS_BOTH_COUNTERS_PROAPTIV_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + raw_event.range = P; +#endif + break; + case CPU_P5600: + case CPU_P6600: + /* 8-bit event numbers */ + raw_id = config & 0x1ff; + base_id = raw_id & 0xff; + if (IS_BOTH_COUNTERS_P5600_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 255 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + raw_event.range = P; +#endif + break; + case CPU_I6400: + case CPU_I6500: + /* 8-bit event numbers */ + base_id = config & 0xff; + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + break; + case CPU_1004K: + if (IS_BOTH_COUNTERS_1004K_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + if (IS_RANGE_P_1004K_EVENT(raw_id, base_id)) + raw_event.range = P; + else if (unlikely(IS_RANGE_V_1004K_EVENT(raw_id))) + raw_event.range = V; + else + raw_event.range = T; +#endif + break; + case CPU_INTERAPTIV: + if (IS_BOTH_COUNTERS_INTERAPTIV_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; +#ifdef CONFIG_MIPS_MT_SMP + if (IS_RANGE_P_INTERAPTIV_EVENT(raw_id, base_id)) + raw_event.range = P; + else if (unlikely(IS_RANGE_V_INTERAPTIV_EVENT(raw_id))) + raw_event.range = V; + else + raw_event.range = T; +#endif + break; + case CPU_BMIPS5000: + if (IS_BOTH_COUNTERS_BMIPS5000_EVENT(base_id)) + raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; + else + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; + break; + case CPU_LOONGSON64: + pmu_type = get_loongson3_pmu_type(); + + switch (pmu_type) { + case LOONGSON_PMU_TYPE1: + raw_event.cntr_mask = + raw_id > 127 ? CNTR_ODD : CNTR_EVEN; + break; + case LOONGSON_PMU_TYPE2: + base_id = config & 0x3ff; + raw_event.cntr_mask = CNTR_ALL; + + if ((base_id >= 1 && base_id < 28) || + (base_id >= 64 && base_id < 90) || + (base_id >= 128 && base_id < 164) || + (base_id >= 192 && base_id < 200) || + (base_id >= 256 && base_id < 275) || + (base_id >= 320 && base_id < 361) || + (base_id >= 384 && base_id < 574)) + break; + + return ERR_PTR(-EOPNOTSUPP); + case LOONGSON_PMU_TYPE3: + base_id = raw_id; + raw_event.cntr_mask = CNTR_ALL; + break; + } + break; + } + + raw_event.event_id = base_id; + + return &raw_event; +} + +static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config) +{ + unsigned int raw_id = config & 0xff; + unsigned int base_id = raw_id & 0x7f; + + + raw_event.cntr_mask = CNTR_ALL; + raw_event.event_id = base_id; + + if (current_cpu_type() == CPU_CAVIUM_OCTEON2) { + if (base_id > 0x42) + return ERR_PTR(-EOPNOTSUPP); + } else { + if (base_id > 0x3a) + return ERR_PTR(-EOPNOTSUPP); + } + + switch (base_id) { + case 0x00: + case 0x0f: + case 0x1e: + case 0x1f: + case 0x2f: + case 0x34: + case 0x3b ... 0x3f: + return ERR_PTR(-EOPNOTSUPP); + default: + break; + } + + return &raw_event; +} + +static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config) +{ + unsigned int raw_id = config & 0xff; + + /* Only 1-63 are defined */ + if ((raw_id < 0x01) || (raw_id > 0x3f)) + return ERR_PTR(-EOPNOTSUPP); + + raw_event.cntr_mask = CNTR_ALL; + raw_event.event_id = raw_id; + + return &raw_event; +} + +static int __init +init_hw_perf_events(void) +{ + int counters, irq, pmu_type; + + pr_info("Performance counters: "); + + counters = n_counters(); + if (counters == 0) { + pr_cont("No available PMU.\n"); + return -ENODEV; + } + +#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS + if (!cpu_has_mipsmt_pertccounters) + counters = counters_total_to_per_cpu(counters); +#endif + + if (get_c0_perfcount_int) + irq = get_c0_perfcount_int(); + else if (cp0_perfcount_irq >= 0) + irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; + else + irq = -1; + + mipspmu.map_raw_event = mipsxx_pmu_map_raw_event; + + switch (current_cpu_type()) { + case CPU_24K: + mipspmu.name = "mips/24K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_34K: + mipspmu.name = "mips/34K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_74K: + mipspmu.name = "mips/74K"; + mipspmu.general_event_map = &mipsxxcore_event_map2; + mipspmu.cache_event_map = &mipsxxcore_cache_map2; + break; + case CPU_PROAPTIV: + mipspmu.name = "mips/proAptiv"; + mipspmu.general_event_map = &mipsxxcore_event_map2; + mipspmu.cache_event_map = &mipsxxcore_cache_map2; + break; + case CPU_P5600: + mipspmu.name = "mips/P5600"; + mipspmu.general_event_map = &mipsxxcore_event_map2; + mipspmu.cache_event_map = &mipsxxcore_cache_map2; + break; + case CPU_P6600: + mipspmu.name = "mips/P6600"; + mipspmu.general_event_map = &mipsxxcore_event_map2; + mipspmu.cache_event_map = &mipsxxcore_cache_map2; + break; + case CPU_I6400: + mipspmu.name = "mips/I6400"; + mipspmu.general_event_map = &i6x00_event_map; + mipspmu.cache_event_map = &i6x00_cache_map; + break; + case CPU_I6500: + mipspmu.name = "mips/I6500"; + mipspmu.general_event_map = &i6x00_event_map; + mipspmu.cache_event_map = &i6x00_cache_map; + break; + case CPU_1004K: + mipspmu.name = "mips/1004K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_1074K: + mipspmu.name = "mips/1074K"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_INTERAPTIV: + mipspmu.name = "mips/interAptiv"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_LOONGSON32: + mipspmu.name = "mips/loongson1"; + mipspmu.general_event_map = &mipsxxcore_event_map; + mipspmu.cache_event_map = &mipsxxcore_cache_map; + break; + case CPU_LOONGSON64: + mipspmu.name = "mips/loongson3"; + pmu_type = get_loongson3_pmu_type(); + + switch (pmu_type) { + case LOONGSON_PMU_TYPE1: + counters = 2; + mipspmu.general_event_map = &loongson3_event_map1; + mipspmu.cache_event_map = &loongson3_cache_map1; + break; + case LOONGSON_PMU_TYPE2: + counters = 4; + mipspmu.general_event_map = &loongson3_event_map2; + mipspmu.cache_event_map = &loongson3_cache_map2; + break; + case LOONGSON_PMU_TYPE3: + counters = 4; + mipspmu.general_event_map = &loongson3_event_map3; + mipspmu.cache_event_map = &loongson3_cache_map3; + break; + } + break; + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: + mipspmu.name = "octeon"; + mipspmu.general_event_map = &octeon_event_map; + mipspmu.cache_event_map = &octeon_cache_map; + mipspmu.map_raw_event = octeon_pmu_map_raw_event; + break; + case CPU_BMIPS5000: + mipspmu.name = "BMIPS5000"; + mipspmu.general_event_map = &bmips5000_event_map; + mipspmu.cache_event_map = &bmips5000_cache_map; + break; + case CPU_XLP: + mipspmu.name = "xlp"; + mipspmu.general_event_map = &xlp_event_map; + mipspmu.cache_event_map = &xlp_cache_map; + mipspmu.map_raw_event = xlp_pmu_map_raw_event; + break; + default: + pr_cont("Either hardware does not support performance " + "counters, or not yet implemented.\n"); + return -ENODEV; + } + + mipspmu.num_counters = counters; + mipspmu.irq = irq; + + if (read_c0_perfctrl0() & MIPS_PERFCTRL_W) { + if (get_loongson3_pmu_type() == LOONGSON_PMU_TYPE2) { + counter_bits = 48; + mipspmu.max_period = (1ULL << 47) - 1; + mipspmu.valid_count = (1ULL << 47) - 1; + mipspmu.overflow = 1ULL << 47; + } else { + counter_bits = 64; + mipspmu.max_period = (1ULL << 63) - 1; + mipspmu.valid_count = (1ULL << 63) - 1; + mipspmu.overflow = 1ULL << 63; + } + mipspmu.read_counter = mipsxx_pmu_read_counter_64; + mipspmu.write_counter = mipsxx_pmu_write_counter_64; + } else { + counter_bits = 32; + mipspmu.max_period = (1ULL << 31) - 1; + mipspmu.valid_count = (1ULL << 31) - 1; + mipspmu.overflow = 1ULL << 31; + mipspmu.read_counter = mipsxx_pmu_read_counter; + mipspmu.write_counter = mipsxx_pmu_write_counter; + } + + on_each_cpu(reset_counters, (void *)(long)counters, 1); + + pr_cont("%s PMU enabled, %d %d-bit counters available to each " + "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq, + irq < 0 ? " (share with timer interrupt)" : ""); + + perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); + + return 0; +} +early_initcall(init_hw_perf_events); diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c new file mode 100644 index 000000000..9bf60d7d4 --- /dev/null +++ b/arch/mips/kernel/pm-cps.c @@ -0,0 +1,738 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2014 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <linux/cpuhotplug.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/slab.h> +#include <linux/suspend.h> + +#include <asm/asm-offsets.h> +#include <asm/cacheflush.h> +#include <asm/cacheops.h> +#include <asm/idle.h> +#include <asm/mips-cps.h> +#include <asm/mipsmtregs.h> +#include <asm/pm.h> +#include <asm/pm-cps.h> +#include <asm/smp-cps.h> +#include <asm/uasm.h> + +/* + * cps_nc_entry_fn - type of a generated non-coherent state entry function + * @online: the count of online coupled VPEs + * @nc_ready_count: pointer to a non-coherent mapping of the core ready_count + * + * The code entering & exiting non-coherent states is generated at runtime + * using uasm, in order to ensure that the compiler cannot insert a stray + * memory access at an unfortunate time and to allow the generation of optimal + * core-specific code particularly for cache routines. If coupled_coherence + * is non-zero and this is the entry function for the CPS_PM_NC_WAIT state, + * returns the number of VPEs that were in the wait state at the point this + * VPE left it. Returns garbage if coupled_coherence is zero or this is not + * the entry function for CPS_PM_NC_WAIT. + */ +typedef unsigned (*cps_nc_entry_fn)(unsigned online, u32 *nc_ready_count); + +/* + * The entry point of the generated non-coherent idle state entry/exit + * functions. Actually per-core rather than per-CPU. + */ +static DEFINE_PER_CPU_READ_MOSTLY(cps_nc_entry_fn[CPS_PM_STATE_COUNT], + nc_asm_enter); + +/* Bitmap indicating which states are supported by the system */ +static DECLARE_BITMAP(state_support, CPS_PM_STATE_COUNT); + +/* + * Indicates the number of coupled VPEs ready to operate in a non-coherent + * state. Actually per-core rather than per-CPU. + */ +static DEFINE_PER_CPU_ALIGNED(u32*, ready_count); + +/* Indicates online CPUs coupled with the current CPU */ +static DEFINE_PER_CPU_ALIGNED(cpumask_t, online_coupled); + +/* + * Used to synchronize entry to deep idle states. Actually per-core rather + * than per-CPU. + */ +static DEFINE_PER_CPU_ALIGNED(atomic_t, pm_barrier); + +/* Saved CPU state across the CPS_PM_POWER_GATED state */ +DEFINE_PER_CPU_ALIGNED(struct mips_static_suspend_state, cps_cpu_state); + +/* A somewhat arbitrary number of labels & relocs for uasm */ +static struct uasm_label labels[32]; +static struct uasm_reloc relocs[32]; + +enum mips_reg { + zero, at, v0, v1, a0, a1, a2, a3, + t0, t1, t2, t3, t4, t5, t6, t7, + s0, s1, s2, s3, s4, s5, s6, s7, + t8, t9, k0, k1, gp, sp, fp, ra, +}; + +bool cps_pm_support_state(enum cps_pm_state state) +{ + return test_bit(state, state_support); +} + +static void coupled_barrier(atomic_t *a, unsigned online) +{ + /* + * This function is effectively the same as + * cpuidle_coupled_parallel_barrier, which can't be used here since + * there's no cpuidle device. + */ + + if (!coupled_coherence) + return; + + smp_mb__before_atomic(); + atomic_inc(a); + + while (atomic_read(a) < online) + cpu_relax(); + + if (atomic_inc_return(a) == online * 2) { + atomic_set(a, 0); + return; + } + + while (atomic_read(a) > online) + cpu_relax(); +} + +int cps_pm_enter_state(enum cps_pm_state state) +{ + unsigned cpu = smp_processor_id(); + unsigned core = cpu_core(¤t_cpu_data); + unsigned online, left; + cpumask_t *coupled_mask = this_cpu_ptr(&online_coupled); + u32 *core_ready_count, *nc_core_ready_count; + void *nc_addr; + cps_nc_entry_fn entry; + struct core_boot_config *core_cfg; + struct vpe_boot_config *vpe_cfg; + + /* Check that there is an entry function for this state */ + entry = per_cpu(nc_asm_enter, core)[state]; + if (!entry) + return -EINVAL; + + /* Calculate which coupled CPUs (VPEs) are online */ +#if defined(CONFIG_MIPS_MT) || defined(CONFIG_CPU_MIPSR6) + if (cpu_online(cpu)) { + cpumask_and(coupled_mask, cpu_online_mask, + &cpu_sibling_map[cpu]); + online = cpumask_weight(coupled_mask); + cpumask_clear_cpu(cpu, coupled_mask); + } else +#endif + { + cpumask_clear(coupled_mask); + online = 1; + } + + /* Setup the VPE to run mips_cps_pm_restore when started again */ + if (IS_ENABLED(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) { + /* Power gating relies upon CPS SMP */ + if (!mips_cps_smp_in_use()) + return -EINVAL; + + core_cfg = &mips_cps_core_bootcfg[core]; + vpe_cfg = &core_cfg->vpe_config[cpu_vpe_id(¤t_cpu_data)]; + vpe_cfg->pc = (unsigned long)mips_cps_pm_restore; + vpe_cfg->gp = (unsigned long)current_thread_info(); + vpe_cfg->sp = 0; + } + + /* Indicate that this CPU might not be coherent */ + cpumask_clear_cpu(cpu, &cpu_coherent_mask); + smp_mb__after_atomic(); + + /* Create a non-coherent mapping of the core ready_count */ + core_ready_count = per_cpu(ready_count, core); + nc_addr = kmap_noncoherent(virt_to_page(core_ready_count), + (unsigned long)core_ready_count); + nc_addr += ((unsigned long)core_ready_count & ~PAGE_MASK); + nc_core_ready_count = nc_addr; + + /* Ensure ready_count is zero-initialised before the assembly runs */ + WRITE_ONCE(*nc_core_ready_count, 0); + coupled_barrier(&per_cpu(pm_barrier, core), online); + + /* Run the generated entry code */ + left = entry(online, nc_core_ready_count); + + /* Remove the non-coherent mapping of ready_count */ + kunmap_noncoherent(); + + /* Indicate that this CPU is definitely coherent */ + cpumask_set_cpu(cpu, &cpu_coherent_mask); + + /* + * If this VPE is the first to leave the non-coherent wait state then + * it needs to wake up any coupled VPEs still running their wait + * instruction so that they return to cpuidle, which can then complete + * coordination between the coupled VPEs & provide the governor with + * a chance to reflect on the length of time the VPEs were in the + * idle state. + */ + if (coupled_coherence && (state == CPS_PM_NC_WAIT) && (left == online)) + arch_send_call_function_ipi_mask(coupled_mask); + + return 0; +} + +static void cps_gen_cache_routine(u32 **pp, struct uasm_label **pl, + struct uasm_reloc **pr, + const struct cache_desc *cache, + unsigned op, int lbl) +{ + unsigned cache_size = cache->ways << cache->waybit; + unsigned i; + const unsigned unroll_lines = 32; + + /* If the cache isn't present this function has it easy */ + if (cache->flags & MIPS_CACHE_NOT_PRESENT) + return; + + /* Load base address */ + UASM_i_LA(pp, t0, (long)CKSEG0); + + /* Calculate end address */ + if (cache_size < 0x8000) + uasm_i_addiu(pp, t1, t0, cache_size); + else + UASM_i_LA(pp, t1, (long)(CKSEG0 + cache_size)); + + /* Start of cache op loop */ + uasm_build_label(pl, *pp, lbl); + + /* Generate the cache ops */ + for (i = 0; i < unroll_lines; i++) { + if (cpu_has_mips_r6) { + uasm_i_cache(pp, op, 0, t0); + uasm_i_addiu(pp, t0, t0, cache->linesz); + } else { + uasm_i_cache(pp, op, i * cache->linesz, t0); + } + } + + if (!cpu_has_mips_r6) + /* Update the base address */ + uasm_i_addiu(pp, t0, t0, unroll_lines * cache->linesz); + + /* Loop if we haven't reached the end address yet */ + uasm_il_bne(pp, pr, t0, t1, lbl); + uasm_i_nop(pp); +} + +static int cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl, + struct uasm_reloc **pr, + const struct cpuinfo_mips *cpu_info, + int lbl) +{ + unsigned i, fsb_size = 8; + unsigned num_loads = (fsb_size * 3) / 2; + unsigned line_stride = 2; + unsigned line_size = cpu_info->dcache.linesz; + unsigned perf_counter, perf_event; + unsigned revision = cpu_info->processor_id & PRID_REV_MASK; + + /* + * Determine whether this CPU requires an FSB flush, and if so which + * performance counter/event reflect stalls due to a full FSB. + */ + switch (__get_cpu_type(cpu_info->cputype)) { + case CPU_INTERAPTIV: + perf_counter = 1; + perf_event = 51; + break; + + case CPU_PROAPTIV: + /* Newer proAptiv cores don't require this workaround */ + if (revision >= PRID_REV_ENCODE_332(1, 1, 0)) + return 0; + + /* On older ones it's unavailable */ + return -1; + + default: + /* Assume that the CPU does not need this workaround */ + return 0; + } + + /* + * Ensure that the fill/store buffer (FSB) is not holding the results + * of a prefetch, since if it is then the CPC sequencer may become + * stuck in the D3 (ClrBus) state whilst entering a low power state. + */ + + /* Preserve perf counter setup */ + uasm_i_mfc0(pp, t2, 25, (perf_counter * 2) + 0); /* PerfCtlN */ + uasm_i_mfc0(pp, t3, 25, (perf_counter * 2) + 1); /* PerfCntN */ + + /* Setup perf counter to count FSB full pipeline stalls */ + uasm_i_addiu(pp, t0, zero, (perf_event << 5) | 0xf); + uasm_i_mtc0(pp, t0, 25, (perf_counter * 2) + 0); /* PerfCtlN */ + uasm_i_ehb(pp); + uasm_i_mtc0(pp, zero, 25, (perf_counter * 2) + 1); /* PerfCntN */ + uasm_i_ehb(pp); + + /* Base address for loads */ + UASM_i_LA(pp, t0, (long)CKSEG0); + + /* Start of clear loop */ + uasm_build_label(pl, *pp, lbl); + + /* Perform some loads to fill the FSB */ + for (i = 0; i < num_loads; i++) + uasm_i_lw(pp, zero, i * line_size * line_stride, t0); + + /* + * Invalidate the new D-cache entries so that the cache will need + * refilling (via the FSB) if the loop is executed again. + */ + for (i = 0; i < num_loads; i++) { + uasm_i_cache(pp, Hit_Invalidate_D, + i * line_size * line_stride, t0); + uasm_i_cache(pp, Hit_Writeback_Inv_SD, + i * line_size * line_stride, t0); + } + + /* Barrier ensuring previous cache invalidates are complete */ + uasm_i_sync(pp, __SYNC_full); + uasm_i_ehb(pp); + + /* Check whether the pipeline stalled due to the FSB being full */ + uasm_i_mfc0(pp, t1, 25, (perf_counter * 2) + 1); /* PerfCntN */ + + /* Loop if it didn't */ + uasm_il_beqz(pp, pr, t1, lbl); + uasm_i_nop(pp); + + /* Restore perf counter 1. The count may well now be wrong... */ + uasm_i_mtc0(pp, t2, 25, (perf_counter * 2) + 0); /* PerfCtlN */ + uasm_i_ehb(pp); + uasm_i_mtc0(pp, t3, 25, (perf_counter * 2) + 1); /* PerfCntN */ + uasm_i_ehb(pp); + + return 0; +} + +static void cps_gen_set_top_bit(u32 **pp, struct uasm_label **pl, + struct uasm_reloc **pr, + unsigned r_addr, int lbl) +{ + uasm_i_lui(pp, t0, uasm_rel_hi(0x80000000)); + uasm_build_label(pl, *pp, lbl); + uasm_i_ll(pp, t1, 0, r_addr); + uasm_i_or(pp, t1, t1, t0); + uasm_i_sc(pp, t1, 0, r_addr); + uasm_il_beqz(pp, pr, t1, lbl); + uasm_i_nop(pp); +} + +static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) +{ + struct uasm_label *l = labels; + struct uasm_reloc *r = relocs; + u32 *buf, *p; + const unsigned r_online = a0; + const unsigned r_nc_count = a1; + const unsigned r_pcohctl = t7; + const unsigned max_instrs = 256; + unsigned cpc_cmd; + int err; + enum { + lbl_incready = 1, + lbl_poll_cont, + lbl_secondary_hang, + lbl_disable_coherence, + lbl_flush_fsb, + lbl_invicache, + lbl_flushdcache, + lbl_hang, + lbl_set_cont, + lbl_secondary_cont, + lbl_decready, + }; + + /* Allocate a buffer to hold the generated code */ + p = buf = kcalloc(max_instrs, sizeof(u32), GFP_KERNEL); + if (!buf) + return NULL; + + /* Clear labels & relocs ready for (re)use */ + memset(labels, 0, sizeof(labels)); + memset(relocs, 0, sizeof(relocs)); + + if (IS_ENABLED(CONFIG_CPU_PM) && state == CPS_PM_POWER_GATED) { + /* Power gating relies upon CPS SMP */ + if (!mips_cps_smp_in_use()) + goto out_err; + + /* + * Save CPU state. Note the non-standard calling convention + * with the return address placed in v0 to avoid clobbering + * the ra register before it is saved. + */ + UASM_i_LA(&p, t0, (long)mips_cps_pm_save); + uasm_i_jalr(&p, v0, t0); + uasm_i_nop(&p); + } + + /* + * Load addresses of required CM & CPC registers. This is done early + * because they're needed in both the enable & disable coherence steps + * but in the coupled case the enable step will only run on one VPE. + */ + UASM_i_LA(&p, r_pcohctl, (long)addr_gcr_cl_coherence()); + + if (coupled_coherence) { + /* Increment ready_count */ + uasm_i_sync(&p, __SYNC_mb); + uasm_build_label(&l, p, lbl_incready); + uasm_i_ll(&p, t1, 0, r_nc_count); + uasm_i_addiu(&p, t2, t1, 1); + uasm_i_sc(&p, t2, 0, r_nc_count); + uasm_il_beqz(&p, &r, t2, lbl_incready); + uasm_i_addiu(&p, t1, t1, 1); + + /* Barrier ensuring all CPUs see the updated r_nc_count value */ + uasm_i_sync(&p, __SYNC_mb); + + /* + * If this is the last VPE to become ready for non-coherence + * then it should branch below. + */ + uasm_il_beq(&p, &r, t1, r_online, lbl_disable_coherence); + uasm_i_nop(&p); + + if (state < CPS_PM_POWER_GATED) { + /* + * Otherwise this is not the last VPE to become ready + * for non-coherence. It needs to wait until coherence + * has been disabled before proceeding, which it will do + * by polling for the top bit of ready_count being set. + */ + uasm_i_addiu(&p, t1, zero, -1); + uasm_build_label(&l, p, lbl_poll_cont); + uasm_i_lw(&p, t0, 0, r_nc_count); + uasm_il_bltz(&p, &r, t0, lbl_secondary_cont); + uasm_i_ehb(&p); + if (cpu_has_mipsmt) + uasm_i_yield(&p, zero, t1); + uasm_il_b(&p, &r, lbl_poll_cont); + uasm_i_nop(&p); + } else { + /* + * The core will lose power & this VPE will not continue + * so it can simply halt here. + */ + if (cpu_has_mipsmt) { + /* Halt the VPE via C0 tchalt register */ + uasm_i_addiu(&p, t0, zero, TCHALT_H); + uasm_i_mtc0(&p, t0, 2, 4); + } else if (cpu_has_vp) { + /* Halt the VP via the CPC VP_STOP register */ + unsigned int vpe_id; + + vpe_id = cpu_vpe_id(&cpu_data[cpu]); + uasm_i_addiu(&p, t0, zero, 1 << vpe_id); + UASM_i_LA(&p, t1, (long)addr_cpc_cl_vp_stop()); + uasm_i_sw(&p, t0, 0, t1); + } else { + BUG(); + } + uasm_build_label(&l, p, lbl_secondary_hang); + uasm_il_b(&p, &r, lbl_secondary_hang); + uasm_i_nop(&p); + } + } + + /* + * This is the point of no return - this VPE will now proceed to + * disable coherence. At this point we *must* be sure that no other + * VPE within the core will interfere with the L1 dcache. + */ + uasm_build_label(&l, p, lbl_disable_coherence); + + /* Invalidate the L1 icache */ + cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].icache, + Index_Invalidate_I, lbl_invicache); + + /* Writeback & invalidate the L1 dcache */ + cps_gen_cache_routine(&p, &l, &r, &cpu_data[cpu].dcache, + Index_Writeback_Inv_D, lbl_flushdcache); + + /* Barrier ensuring previous cache invalidates are complete */ + uasm_i_sync(&p, __SYNC_full); + uasm_i_ehb(&p); + + if (mips_cm_revision() < CM_REV_CM3) { + /* + * Disable all but self interventions. The load from COHCTL is + * defined by the interAptiv & proAptiv SUMs as ensuring that the + * operation resulting from the preceding store is complete. + */ + uasm_i_addiu(&p, t0, zero, 1 << cpu_core(&cpu_data[cpu])); + uasm_i_sw(&p, t0, 0, r_pcohctl); + uasm_i_lw(&p, t0, 0, r_pcohctl); + + /* Barrier to ensure write to coherence control is complete */ + uasm_i_sync(&p, __SYNC_full); + uasm_i_ehb(&p); + } + + /* Disable coherence */ + uasm_i_sw(&p, zero, 0, r_pcohctl); + uasm_i_lw(&p, t0, 0, r_pcohctl); + + if (state >= CPS_PM_CLOCK_GATED) { + err = cps_gen_flush_fsb(&p, &l, &r, &cpu_data[cpu], + lbl_flush_fsb); + if (err) + goto out_err; + + /* Determine the CPC command to issue */ + switch (state) { + case CPS_PM_CLOCK_GATED: + cpc_cmd = CPC_Cx_CMD_CLOCKOFF; + break; + case CPS_PM_POWER_GATED: + cpc_cmd = CPC_Cx_CMD_PWRDOWN; + break; + default: + BUG(); + goto out_err; + } + + /* Issue the CPC command */ + UASM_i_LA(&p, t0, (long)addr_cpc_cl_cmd()); + uasm_i_addiu(&p, t1, zero, cpc_cmd); + uasm_i_sw(&p, t1, 0, t0); + + if (state == CPS_PM_POWER_GATED) { + /* If anything goes wrong just hang */ + uasm_build_label(&l, p, lbl_hang); + uasm_il_b(&p, &r, lbl_hang); + uasm_i_nop(&p); + + /* + * There's no point generating more code, the core is + * powered down & if powered back up will run from the + * reset vector not from here. + */ + goto gen_done; + } + + /* Barrier to ensure write to CPC command is complete */ + uasm_i_sync(&p, __SYNC_full); + uasm_i_ehb(&p); + } + + if (state == CPS_PM_NC_WAIT) { + /* + * At this point it is safe for all VPEs to proceed with + * execution. This VPE will set the top bit of ready_count + * to indicate to the other VPEs that they may continue. + */ + if (coupled_coherence) + cps_gen_set_top_bit(&p, &l, &r, r_nc_count, + lbl_set_cont); + + /* + * VPEs which did not disable coherence will continue + * executing, after coherence has been disabled, from this + * point. + */ + uasm_build_label(&l, p, lbl_secondary_cont); + + /* Now perform our wait */ + uasm_i_wait(&p, 0); + } + + /* + * Re-enable coherence. Note that for CPS_PM_NC_WAIT all coupled VPEs + * will run this. The first will actually re-enable coherence & the + * rest will just be performing a rather unusual nop. + */ + uasm_i_addiu(&p, t0, zero, mips_cm_revision() < CM_REV_CM3 + ? CM_GCR_Cx_COHERENCE_COHDOMAINEN + : CM3_GCR_Cx_COHERENCE_COHEN); + + uasm_i_sw(&p, t0, 0, r_pcohctl); + uasm_i_lw(&p, t0, 0, r_pcohctl); + + /* Barrier to ensure write to coherence control is complete */ + uasm_i_sync(&p, __SYNC_full); + uasm_i_ehb(&p); + + if (coupled_coherence && (state == CPS_PM_NC_WAIT)) { + /* Decrement ready_count */ + uasm_build_label(&l, p, lbl_decready); + uasm_i_sync(&p, __SYNC_mb); + uasm_i_ll(&p, t1, 0, r_nc_count); + uasm_i_addiu(&p, t2, t1, -1); + uasm_i_sc(&p, t2, 0, r_nc_count); + uasm_il_beqz(&p, &r, t2, lbl_decready); + uasm_i_andi(&p, v0, t1, (1 << fls(smp_num_siblings)) - 1); + + /* Barrier ensuring all CPUs see the updated r_nc_count value */ + uasm_i_sync(&p, __SYNC_mb); + } + + if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) { + /* + * At this point it is safe for all VPEs to proceed with + * execution. This VPE will set the top bit of ready_count + * to indicate to the other VPEs that they may continue. + */ + cps_gen_set_top_bit(&p, &l, &r, r_nc_count, lbl_set_cont); + + /* + * This core will be reliant upon another core sending a + * power-up command to the CPC in order to resume operation. + * Thus an arbitrary VPE can't trigger the core leaving the + * idle state and the one that disables coherence might as well + * be the one to re-enable it. The rest will continue from here + * after that has been done. + */ + uasm_build_label(&l, p, lbl_secondary_cont); + + /* Barrier ensuring all CPUs see the updated r_nc_count value */ + uasm_i_sync(&p, __SYNC_mb); + } + + /* The core is coherent, time to return to C code */ + uasm_i_jr(&p, ra); + uasm_i_nop(&p); + +gen_done: + /* Ensure the code didn't exceed the resources allocated for it */ + BUG_ON((p - buf) > max_instrs); + BUG_ON((l - labels) > ARRAY_SIZE(labels)); + BUG_ON((r - relocs) > ARRAY_SIZE(relocs)); + + /* Patch branch offsets */ + uasm_resolve_relocs(relocs, labels); + + /* Flush the icache */ + local_flush_icache_range((unsigned long)buf, (unsigned long)p); + + return buf; +out_err: + kfree(buf); + return NULL; +} + +static int cps_pm_online_cpu(unsigned int cpu) +{ + enum cps_pm_state state; + unsigned core = cpu_core(&cpu_data[cpu]); + void *entry_fn, *core_rc; + + for (state = CPS_PM_NC_WAIT; state < CPS_PM_STATE_COUNT; state++) { + if (per_cpu(nc_asm_enter, core)[state]) + continue; + if (!test_bit(state, state_support)) + continue; + + entry_fn = cps_gen_entry_code(cpu, state); + if (!entry_fn) { + pr_err("Failed to generate core %u state %u entry\n", + core, state); + clear_bit(state, state_support); + } + + per_cpu(nc_asm_enter, core)[state] = entry_fn; + } + + if (!per_cpu(ready_count, core)) { + core_rc = kmalloc(sizeof(u32), GFP_KERNEL); + if (!core_rc) { + pr_err("Failed allocate core %u ready_count\n", core); + return -ENOMEM; + } + per_cpu(ready_count, core) = core_rc; + } + + return 0; +} + +static int cps_pm_power_notifier(struct notifier_block *this, + unsigned long event, void *ptr) +{ + unsigned int stat; + + switch (event) { + case PM_SUSPEND_PREPARE: + stat = read_cpc_cl_stat_conf(); + /* + * If we're attempting to suspend the system and power down all + * of the cores, the JTAG detect bit indicates that the CPC will + * instead put the cores into clock-off state. In this state + * a connected debugger can cause the CPU to attempt + * interactions with the powered down system. At best this will + * fail. At worst, it can hang the NoC, requiring a hard reset. + * To avoid this, just block system suspend if a JTAG probe + * is detected. + */ + if (stat & CPC_Cx_STAT_CONF_EJTAG_PROBE) { + pr_warn("JTAG probe is connected - abort suspend\n"); + return NOTIFY_BAD; + } + return NOTIFY_DONE; + default: + return NOTIFY_DONE; + } +} + +static int __init cps_pm_init(void) +{ + /* A CM is required for all non-coherent states */ + if (!mips_cm_present()) { + pr_warn("pm-cps: no CM, non-coherent states unavailable\n"); + return 0; + } + + /* + * If interrupts were enabled whilst running a wait instruction on a + * non-coherent core then the VPE may end up processing interrupts + * whilst non-coherent. That would be bad. + */ + if (cpu_wait == r4k_wait_irqoff) + set_bit(CPS_PM_NC_WAIT, state_support); + else + pr_warn("pm-cps: non-coherent wait unavailable\n"); + + /* Detect whether a CPC is present */ + if (mips_cpc_present()) { + /* Detect whether clock gating is implemented */ + if (read_cpc_cl_stat_conf() & CPC_Cx_STAT_CONF_CLKGAT_IMPL) + set_bit(CPS_PM_CLOCK_GATED, state_support); + else + pr_warn("pm-cps: CPC does not support clock gating\n"); + + /* Power gating is available with CPS SMP & any CPC */ + if (mips_cps_smp_in_use()) + set_bit(CPS_PM_POWER_GATED, state_support); + else + pr_warn("pm-cps: CPS SMP not in use, power gating unavailable\n"); + } else { + pr_warn("pm-cps: no CPC, clock & power gating unavailable\n"); + } + + pm_notifier(cps_pm_power_notifier, 0); + + return cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mips/cps_pm:online", + cps_pm_online_cpu, NULL); +} +arch_initcall(cps_pm_init); diff --git a/arch/mips/kernel/pm.c b/arch/mips/kernel/pm.c new file mode 100644 index 000000000..486ed2bf2 --- /dev/null +++ b/arch/mips/kernel/pm.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2014 Imagination Technologies Ltd. + * + * CPU PM notifiers for saving/restoring general CPU state. + */ + +#include <linux/cpu_pm.h> +#include <linux/init.h> + +#include <asm/dsp.h> +#include <asm/fpu.h> +#include <asm/mmu_context.h> +#include <asm/pm.h> +#include <asm/watch.h> + +/* Used by PM helper macros in asm/pm.h */ +struct mips_static_suspend_state mips_static_suspend_state; + +/** + * mips_cpu_save() - Save general CPU state. + * Ensures that general CPU context is saved, notably FPU and DSP. + */ +static int mips_cpu_save(void) +{ + /* Save FPU state */ + lose_fpu(1); + + /* Save DSP state */ + save_dsp(current); + + return 0; +} + +/** + * mips_cpu_restore() - Restore general CPU state. + * Restores important CPU context. + */ +static void mips_cpu_restore(void) +{ + unsigned int cpu = smp_processor_id(); + + /* Restore ASID */ + if (current->mm) + write_c0_entryhi(cpu_asid(cpu, current->mm)); + + /* Restore DSP state */ + restore_dsp(current); + + /* Restore UserLocal */ + if (cpu_has_userlocal) + write_c0_userlocal(current_thread_info()->tp_value); + + /* Restore watch registers */ + __restore_watch(current); +} + +/** + * mips_pm_notifier() - Notifier for preserving general CPU context. + * @self: Notifier block. + * @cmd: CPU PM event. + * @v: Private data (unused). + * + * This is called when a CPU power management event occurs, and is used to + * ensure that important CPU context is preserved across a CPU power down. + */ +static int mips_pm_notifier(struct notifier_block *self, unsigned long cmd, + void *v) +{ + int ret; + + switch (cmd) { + case CPU_PM_ENTER: + ret = mips_cpu_save(); + if (ret) + return NOTIFY_STOP; + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + mips_cpu_restore(); + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block mips_pm_notifier_block = { + .notifier_call = mips_pm_notifier, +}; + +static int __init mips_pm_init(void) +{ + return cpu_pm_register_notifier(&mips_pm_notifier_block); +} +arch_initcall(mips_pm_init); diff --git a/arch/mips/kernel/probes-common.h b/arch/mips/kernel/probes-common.h new file mode 100644 index 000000000..73e1d5e95 --- /dev/null +++ b/arch/mips/kernel/probes-common.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2016 Imagination Technologies + * Author: Marcin Nowakowski <marcin.nowakowski@mips.com> + */ + +#ifndef __PROBES_COMMON_H +#define __PROBES_COMMON_H + +#include <asm/inst.h> + +int __insn_is_compact_branch(union mips_instruction insn); + +static inline int __insn_has_delay_slot(const union mips_instruction insn) +{ + switch (insn.i_format.opcode) { + /* + * jr and jalr are in r_format format. + */ + case spec_op: + switch (insn.r_format.func) { + case jalr_op: + case jr_op: + return 1; + } + break; + + /* + * This group contains: + * bltz_op, bgez_op, bltzl_op, bgezl_op, + * bltzal_op, bgezal_op, bltzall_op, bgezall_op. + */ + case bcond_op: + switch (insn.i_format.rt) { + case bltz_op: + case bltzl_op: + case bgez_op: + case bgezl_op: + case bltzal_op: + case bltzall_op: + case bgezal_op: + case bgezall_op: + case bposge32_op: + return 1; + } + break; + + /* + * These are unconditional and in j_format. + */ + case jal_op: + case j_op: + case beq_op: + case beql_op: + case bne_op: + case bnel_op: + case blez_op: /* not really i_format */ + case blezl_op: + case bgtz_op: + case bgtzl_op: + return 1; + + /* + * And now the FPA/cp1 branch instructions. + */ + case cop1_op: +#ifdef CONFIG_CPU_CAVIUM_OCTEON + case lwc2_op: /* This is bbit0 on Octeon */ + case ldc2_op: /* This is bbit032 on Octeon */ + case swc2_op: /* This is bbit1 on Octeon */ + case sdc2_op: /* This is bbit132 on Octeon */ +#endif + return 1; + } + + return 0; +} + +#endif /* __PROBES_COMMON_H */ diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c new file mode 100644 index 000000000..33a02f381 --- /dev/null +++ b/arch/mips/kernel/proc.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1995, 1996, 2001 Ralf Baechle + * Copyright (C) 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2004 Maciej W. Rozycki + */ +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <asm/bootinfo.h> +#include <asm/cpu.h> +#include <asm/cpu-features.h> +#include <asm/idle.h> +#include <asm/mipsregs.h> +#include <asm/processor.h> +#include <asm/prom.h> + +unsigned int vced_count, vcei_count; + +/* + * * No lock; only written during early bootup by CPU 0. + * */ +static RAW_NOTIFIER_HEAD(proc_cpuinfo_chain); + +int __ref register_proc_cpuinfo_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&proc_cpuinfo_chain, nb); +} + +int proc_cpuinfo_notifier_call_chain(unsigned long val, void *v) +{ + return raw_notifier_call_chain(&proc_cpuinfo_chain, val, v); +} + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + struct proc_cpuinfo_notifier_args proc_cpuinfo_notifier_args; + unsigned long n = (unsigned long) v - 1; + unsigned int version = cpu_data[n].processor_id; + unsigned int fp_vers = cpu_data[n].fpu_id; + char fmt [64]; + int i; + +#ifdef CONFIG_SMP + if (!cpu_online(n)) + return 0; +#endif + + /* + * For the first processor also print the system type + */ + if (n == 0) { + seq_printf(m, "system type\t\t: %s\n", get_system_type()); + if (mips_get_machine_name()) + seq_printf(m, "machine\t\t\t: %s\n", + mips_get_machine_name()); + } + + seq_printf(m, "processor\t\t: %ld\n", n); + sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n", + cpu_data[n].options & MIPS_CPU_FPU ? " FPU V%d.%d" : ""); + seq_printf(m, fmt, __cpu_name[n], + (version >> 4) & 0x0f, version & 0x0f, + (fp_vers >> 4) & 0x0f, fp_vers & 0x0f); + seq_printf(m, "BogoMIPS\t\t: %u.%02u\n", + cpu_data[n].udelay_val / (500000/HZ), + (cpu_data[n].udelay_val / (5000/HZ)) % 100); + seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no"); + seq_printf(m, "microsecond timers\t: %s\n", + cpu_has_counter ? "yes" : "no"); + seq_printf(m, "tlb_entries\t\t: %d\n", cpu_data[n].tlbsize); + seq_printf(m, "extra interrupt vector\t: %s\n", + cpu_has_divec ? "yes" : "no"); + seq_printf(m, "hardware watchpoint\t: %s", + cpu_has_watch ? "yes, " : "no\n"); + if (cpu_has_watch) { + seq_printf(m, "count: %d, address/irw mask: [", + cpu_data[n].watch_reg_count); + for (i = 0; i < cpu_data[n].watch_reg_count; i++) + seq_printf(m, "%s0x%04x", i ? ", " : "" , + cpu_data[n].watch_reg_masks[i]); + seq_printf(m, "]\n"); + } + + seq_printf(m, "isa\t\t\t:"); + if (cpu_has_mips_1) + seq_printf(m, " mips1"); + if (cpu_has_mips_2) + seq_printf(m, "%s", " mips2"); + if (cpu_has_mips_3) + seq_printf(m, "%s", " mips3"); + if (cpu_has_mips_4) + seq_printf(m, "%s", " mips4"); + if (cpu_has_mips_5) + seq_printf(m, "%s", " mips5"); + if (cpu_has_mips32r1) + seq_printf(m, "%s", " mips32r1"); + if (cpu_has_mips32r2) + seq_printf(m, "%s", " mips32r2"); + if (cpu_has_mips32r5) + seq_printf(m, "%s", " mips32r5"); + if (cpu_has_mips32r6) + seq_printf(m, "%s", " mips32r6"); + if (cpu_has_mips64r1) + seq_printf(m, "%s", " mips64r1"); + if (cpu_has_mips64r2) + seq_printf(m, "%s", " mips64r2"); + if (cpu_has_mips64r5) + seq_printf(m, "%s", " mips64r5"); + if (cpu_has_mips64r6) + seq_printf(m, "%s", " mips64r6"); + seq_printf(m, "\n"); + + seq_printf(m, "ASEs implemented\t:"); + if (cpu_has_mips16) seq_printf(m, "%s", " mips16"); + if (cpu_has_mips16e2) seq_printf(m, "%s", " mips16e2"); + if (cpu_has_mdmx) seq_printf(m, "%s", " mdmx"); + if (cpu_has_mips3d) seq_printf(m, "%s", " mips3d"); + if (cpu_has_smartmips) seq_printf(m, "%s", " smartmips"); + if (cpu_has_dsp) seq_printf(m, "%s", " dsp"); + if (cpu_has_dsp2) seq_printf(m, "%s", " dsp2"); + if (cpu_has_dsp3) seq_printf(m, "%s", " dsp3"); + if (cpu_has_mipsmt) seq_printf(m, "%s", " mt"); + if (cpu_has_mmips) seq_printf(m, "%s", " micromips"); + if (cpu_has_vz) seq_printf(m, "%s", " vz"); + if (cpu_has_msa) seq_printf(m, "%s", " msa"); + if (cpu_has_eva) seq_printf(m, "%s", " eva"); + if (cpu_has_htw) seq_printf(m, "%s", " htw"); + if (cpu_has_xpa) seq_printf(m, "%s", " xpa"); + if (cpu_has_loongson_mmi) seq_printf(m, "%s", " loongson-mmi"); + if (cpu_has_loongson_cam) seq_printf(m, "%s", " loongson-cam"); + if (cpu_has_loongson_ext) seq_printf(m, "%s", " loongson-ext"); + if (cpu_has_loongson_ext2) seq_printf(m, "%s", " loongson-ext2"); + seq_printf(m, "\n"); + + if (cpu_has_mmips) { + seq_printf(m, "micromips kernel\t: %s\n", + (read_c0_config3() & MIPS_CONF3_ISA_OE) ? "yes" : "no"); + } + seq_printf(m, "shadow register sets\t: %d\n", + cpu_data[n].srsets); + seq_printf(m, "kscratch registers\t: %d\n", + hweight8(cpu_data[n].kscratch_mask)); + seq_printf(m, "package\t\t\t: %d\n", cpu_data[n].package); + seq_printf(m, "core\t\t\t: %d\n", cpu_core(&cpu_data[n])); + +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_CPU_MIPSR6) + if (cpu_has_mipsmt) + seq_printf(m, "VPE\t\t\t: %d\n", cpu_vpe_id(&cpu_data[n])); + else if (cpu_has_vp) + seq_printf(m, "VP\t\t\t: %d\n", cpu_vpe_id(&cpu_data[n])); +#endif + + sprintf(fmt, "VCE%%c exceptions\t\t: %s\n", + cpu_has_vce ? "%u" : "not available"); + seq_printf(m, fmt, 'D', vced_count); + seq_printf(m, fmt, 'I', vcei_count); + + proc_cpuinfo_notifier_args.m = m; + proc_cpuinfo_notifier_args.n = n; + + raw_notifier_call_chain(&proc_cpuinfo_chain, 0, + &proc_cpuinfo_notifier_args); + + seq_printf(m, "\n"); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + unsigned long i = *pos; + + return i < nr_cpu_ids ? (void *) (i + 1) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, +}; diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c new file mode 100644 index 000000000..98ecaf6f3 --- /dev/null +++ b/arch/mips/kernel/process.c @@ -0,0 +1,896 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000 by Ralf Baechle and others. + * Copyright (C) 2005, 2006 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2004 Thiemo Seufer + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/sched/debug.h> +#include <linux/sched/task.h> +#include <linux/sched/task_stack.h> +#include <linux/tick.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/export.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/personality.h> +#include <linux/sys.h> +#include <linux/init.h> +#include <linux/completion.h> +#include <linux/kallsyms.h> +#include <linux/random.h> +#include <linux/prctl.h> +#include <linux/nmi.h> +#include <linux/cpu.h> + +#include <asm/abi.h> +#include <asm/asm.h> +#include <asm/bootinfo.h> +#include <asm/cpu.h> +#include <asm/dsemul.h> +#include <asm/dsp.h> +#include <asm/fpu.h> +#include <asm/irq.h> +#include <asm/mips-cps.h> +#include <asm/msa.h> +#include <asm/mipsregs.h> +#include <asm/processor.h> +#include <asm/reg.h> +#include <linux/uaccess.h> +#include <asm/io.h> +#include <asm/elf.h> +#include <asm/isadep.h> +#include <asm/inst.h> +#include <asm/stacktrace.h> +#include <asm/irq_regs.h> +#include <asm/exec.h> + +#ifdef CONFIG_HOTPLUG_CPU +void arch_cpu_idle_dead(void) +{ + play_dead(); +} +#endif + +asmlinkage void ret_from_fork(void); +asmlinkage void ret_from_kernel_thread(void); + +void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) +{ + unsigned long status; + + /* New thread loses kernel privileges. */ + status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_CU2|ST0_FR|KU_MASK); + status |= KU_USER; + regs->cp0_status = status; + lose_fpu(0); + clear_thread_flag(TIF_MSA_CTX_LIVE); + clear_used_math(); +#ifdef CONFIG_MIPS_FP_SUPPORT + atomic_set(¤t->thread.bd_emu_frame, BD_EMUFRAME_NONE); +#endif + init_dsp(); + regs->cp0_epc = pc; + regs->regs[29] = sp; +} + +void exit_thread(struct task_struct *tsk) +{ + /* + * User threads may have allocated a delay slot emulation frame. + * If so, clean up that allocation. + */ + if (!(current->flags & PF_KTHREAD)) + dsemul_thread_cleanup(tsk); +} + +int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) +{ + /* + * Save any process state which is live in hardware registers to the + * parent context prior to duplication. This prevents the new child + * state becoming stale if the parent is preempted before copy_thread() + * gets a chance to save the parent's live hardware registers to the + * child context. + */ + preempt_disable(); + + if (is_msa_enabled()) + save_msa(current); + else if (is_fpu_owner()) + _save_fp(current); + + save_dsp(current); + + preempt_enable(); + + *dst = *src; + return 0; +} + +/* + * Copy architecture-specific thread state + */ +int copy_thread(unsigned long clone_flags, unsigned long usp, + unsigned long kthread_arg, struct task_struct *p, + unsigned long tls) +{ + struct thread_info *ti = task_thread_info(p); + struct pt_regs *childregs, *regs = current_pt_regs(); + unsigned long childksp; + + childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32; + + /* set up new TSS. */ + childregs = (struct pt_regs *) childksp - 1; + /* Put the stack after the struct pt_regs. */ + childksp = (unsigned long) childregs; + p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK; + if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) { + /* kernel thread */ + unsigned long status = p->thread.cp0_status; + memset(childregs, 0, sizeof(struct pt_regs)); + ti->addr_limit = KERNEL_DS; + p->thread.reg16 = usp; /* fn */ + p->thread.reg17 = kthread_arg; + p->thread.reg29 = childksp; + p->thread.reg31 = (unsigned long) ret_from_kernel_thread; +#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) + status = (status & ~(ST0_KUP | ST0_IEP | ST0_IEC)) | + ((status & (ST0_KUC | ST0_IEC)) << 2); +#else + status |= ST0_EXL; +#endif + childregs->cp0_status = status; + return 0; + } + + /* user thread */ + *childregs = *regs; + childregs->regs[7] = 0; /* Clear error flag */ + childregs->regs[2] = 0; /* Child gets zero as return value */ + if (usp) + childregs->regs[29] = usp; + ti->addr_limit = USER_DS; + + p->thread.reg29 = (unsigned long) childregs; + p->thread.reg31 = (unsigned long) ret_from_fork; + + /* + * New tasks lose permission to use the fpu. This accelerates context + * switching for most programs since they don't use the fpu. + */ + childregs->cp0_status &= ~(ST0_CU2|ST0_CU1); + + clear_tsk_thread_flag(p, TIF_USEDFPU); + clear_tsk_thread_flag(p, TIF_USEDMSA); + clear_tsk_thread_flag(p, TIF_MSA_CTX_LIVE); + +#ifdef CONFIG_MIPS_MT_FPAFF + clear_tsk_thread_flag(p, TIF_FPUBOUND); +#endif /* CONFIG_MIPS_MT_FPAFF */ + +#ifdef CONFIG_MIPS_FP_SUPPORT + atomic_set(&p->thread.bd_emu_frame, BD_EMUFRAME_NONE); +#endif + + if (clone_flags & CLONE_SETTLS) + ti->tp_value = tls; + + return 0; +} + +#ifdef CONFIG_STACKPROTECTOR +#include <linux/stackprotector.h> +unsigned long __stack_chk_guard __read_mostly; +EXPORT_SYMBOL(__stack_chk_guard); +#endif + +struct mips_frame_info { + void *func; + unsigned long func_size; + int frame_size; + int pc_offset; +}; + +#define J_TARGET(pc,target) \ + (((unsigned long)(pc) & 0xf0000000) | ((target) << 2)) + +static inline int is_ra_save_ins(union mips_instruction *ip, int *poff) +{ +#ifdef CONFIG_CPU_MICROMIPS + /* + * swsp ra,offset + * swm16 reglist,offset(sp) + * swm32 reglist,offset(sp) + * sw32 ra,offset(sp) + * jradiussp - NOT SUPPORTED + * + * microMIPS is way more fun... + */ + if (mm_insn_16bit(ip->word >> 16)) { + switch (ip->mm16_r5_format.opcode) { + case mm_swsp16_op: + if (ip->mm16_r5_format.rt != 31) + return 0; + + *poff = ip->mm16_r5_format.imm; + *poff = (*poff << 2) / sizeof(ulong); + return 1; + + case mm_pool16c_op: + switch (ip->mm16_m_format.func) { + case mm_swm16_op: + *poff = ip->mm16_m_format.imm; + *poff += 1 + ip->mm16_m_format.rlist; + *poff = (*poff << 2) / sizeof(ulong); + return 1; + + default: + return 0; + } + + default: + return 0; + } + } + + switch (ip->i_format.opcode) { + case mm_sw32_op: + if (ip->i_format.rs != 29) + return 0; + if (ip->i_format.rt != 31) + return 0; + + *poff = ip->i_format.simmediate / sizeof(ulong); + return 1; + + case mm_pool32b_op: + switch (ip->mm_m_format.func) { + case mm_swm32_func: + if (ip->mm_m_format.rd < 0x10) + return 0; + if (ip->mm_m_format.base != 29) + return 0; + + *poff = ip->mm_m_format.simmediate; + *poff += (ip->mm_m_format.rd & 0xf) * sizeof(u32); + *poff /= sizeof(ulong); + return 1; + default: + return 0; + } + + default: + return 0; + } +#else + /* sw / sd $ra, offset($sp) */ + if ((ip->i_format.opcode == sw_op || ip->i_format.opcode == sd_op) && + ip->i_format.rs == 29 && ip->i_format.rt == 31) { + *poff = ip->i_format.simmediate / sizeof(ulong); + return 1; + } +#ifdef CONFIG_CPU_LOONGSON64 + if ((ip->loongson3_lswc2_format.opcode == swc2_op) && + (ip->loongson3_lswc2_format.ls == 1) && + (ip->loongson3_lswc2_format.fr == 0) && + (ip->loongson3_lswc2_format.base == 29)) { + if (ip->loongson3_lswc2_format.rt == 31) { + *poff = ip->loongson3_lswc2_format.offset << 1; + return 1; + } + if (ip->loongson3_lswc2_format.rq == 31) { + *poff = (ip->loongson3_lswc2_format.offset << 1) + 1; + return 1; + } + } +#endif + return 0; +#endif +} + +static inline int is_jump_ins(union mips_instruction *ip) +{ +#ifdef CONFIG_CPU_MICROMIPS + /* + * jr16,jrc,jalr16,jalr16 + * jal + * jalr/jr,jalr.hb/jr.hb,jalrs,jalrs.hb + * jraddiusp - NOT SUPPORTED + * + * microMIPS is kind of more fun... + */ + if (mm_insn_16bit(ip->word >> 16)) { + if ((ip->mm16_r5_format.opcode == mm_pool16c_op && + (ip->mm16_r5_format.rt & mm_jr16_op) == mm_jr16_op)) + return 1; + return 0; + } + + if (ip->j_format.opcode == mm_j32_op) + return 1; + if (ip->j_format.opcode == mm_jal32_op) + return 1; + if (ip->r_format.opcode != mm_pool32a_op || + ip->r_format.func != mm_pool32axf_op) + return 0; + return ((ip->u_format.uimmediate >> 6) & mm_jalr_op) == mm_jalr_op; +#else + if (ip->j_format.opcode == j_op) + return 1; + if (ip->j_format.opcode == jal_op) + return 1; + if (ip->r_format.opcode != spec_op) + return 0; + return ip->r_format.func == jalr_op || ip->r_format.func == jr_op; +#endif +} + +static inline int is_sp_move_ins(union mips_instruction *ip, int *frame_size) +{ +#ifdef CONFIG_CPU_MICROMIPS + unsigned short tmp; + + /* + * addiusp -imm + * addius5 sp,-imm + * addiu32 sp,sp,-imm + * jradiussp - NOT SUPPORTED + * + * microMIPS is not more fun... + */ + if (mm_insn_16bit(ip->word >> 16)) { + if (ip->mm16_r3_format.opcode == mm_pool16d_op && + ip->mm16_r3_format.simmediate & mm_addiusp_func) { + tmp = ip->mm_b0_format.simmediate >> 1; + tmp = ((tmp & 0x1ff) ^ 0x100) - 0x100; + if ((tmp + 2) < 4) /* 0x0,0x1,0x1fe,0x1ff are special */ + tmp ^= 0x100; + *frame_size = -(signed short)(tmp << 2); + return 1; + } + if (ip->mm16_r5_format.opcode == mm_pool16d_op && + ip->mm16_r5_format.rt == 29) { + tmp = ip->mm16_r5_format.imm >> 1; + *frame_size = -(signed short)(tmp & 0xf); + return 1; + } + return 0; + } + + if (ip->mm_i_format.opcode == mm_addiu32_op && + ip->mm_i_format.rt == 29 && ip->mm_i_format.rs == 29) { + *frame_size = -ip->i_format.simmediate; + return 1; + } +#else + /* addiu/daddiu sp,sp,-imm */ + if (ip->i_format.rs != 29 || ip->i_format.rt != 29) + return 0; + + if (ip->i_format.opcode == addiu_op || + ip->i_format.opcode == daddiu_op) { + *frame_size = -ip->i_format.simmediate; + return 1; + } +#endif + return 0; +} + +static int get_frame_info(struct mips_frame_info *info) +{ + bool is_mmips = IS_ENABLED(CONFIG_CPU_MICROMIPS); + union mips_instruction insn, *ip; + const unsigned int max_insns = 128; + unsigned int last_insn_size = 0; + unsigned int i; + bool saw_jump = false; + + info->pc_offset = -1; + info->frame_size = 0; + + ip = (void *)msk_isa16_mode((ulong)info->func); + if (!ip) + goto err; + + for (i = 0; i < max_insns; i++) { + ip = (void *)ip + last_insn_size; + + if (is_mmips && mm_insn_16bit(ip->halfword[0])) { + insn.word = ip->halfword[0] << 16; + last_insn_size = 2; + } else if (is_mmips) { + insn.word = ip->halfword[0] << 16 | ip->halfword[1]; + last_insn_size = 4; + } else { + insn.word = ip->word; + last_insn_size = 4; + } + + if (!info->frame_size) { + is_sp_move_ins(&insn, &info->frame_size); + continue; + } else if (!saw_jump && is_jump_ins(ip)) { + /* + * If we see a jump instruction, we are finished + * with the frame save. + * + * Some functions can have a shortcut return at + * the beginning of the function, so don't start + * looking for jump instruction until we see the + * frame setup. + * + * The RA save instruction can get put into the + * delay slot of the jump instruction, so look + * at the next instruction, too. + */ + saw_jump = true; + continue; + } + if (info->pc_offset == -1 && + is_ra_save_ins(&insn, &info->pc_offset)) + break; + if (saw_jump) + break; + } + if (info->frame_size && info->pc_offset >= 0) /* nested */ + return 0; + if (info->pc_offset < 0) /* leaf */ + return 1; + /* prologue seems bogus... */ +err: + return -1; +} + +static struct mips_frame_info schedule_mfi __read_mostly; + +#ifdef CONFIG_KALLSYMS +static unsigned long get___schedule_addr(void) +{ + return kallsyms_lookup_name("__schedule"); +} +#else +static unsigned long get___schedule_addr(void) +{ + union mips_instruction *ip = (void *)schedule; + int max_insns = 8; + int i; + + for (i = 0; i < max_insns; i++, ip++) { + if (ip->j_format.opcode == j_op) + return J_TARGET(ip, ip->j_format.target); + } + return 0; +} +#endif + +static int __init frame_info_init(void) +{ + unsigned long size = 0; +#ifdef CONFIG_KALLSYMS + unsigned long ofs; +#endif + unsigned long addr; + + addr = get___schedule_addr(); + if (!addr) + addr = (unsigned long)schedule; + +#ifdef CONFIG_KALLSYMS + kallsyms_lookup_size_offset(addr, &size, &ofs); +#endif + schedule_mfi.func = (void *)addr; + schedule_mfi.func_size = size; + + get_frame_info(&schedule_mfi); + + /* + * Without schedule() frame info, result given by + * thread_saved_pc() and get_wchan() are not reliable. + */ + if (schedule_mfi.pc_offset < 0) + printk("Can't analyze schedule() prologue at %p\n", schedule); + + return 0; +} + +arch_initcall(frame_info_init); + +/* + * Return saved PC of a blocked thread. + */ +static unsigned long thread_saved_pc(struct task_struct *tsk) +{ + struct thread_struct *t = &tsk->thread; + + /* New born processes are a special case */ + if (t->reg31 == (unsigned long) ret_from_fork) + return t->reg31; + if (schedule_mfi.pc_offset < 0) + return 0; + return ((unsigned long *)t->reg29)[schedule_mfi.pc_offset]; +} + + +#ifdef CONFIG_KALLSYMS +/* generic stack unwinding function */ +unsigned long notrace unwind_stack_by_address(unsigned long stack_page, + unsigned long *sp, + unsigned long pc, + unsigned long *ra) +{ + unsigned long low, high, irq_stack_high; + struct mips_frame_info info; + unsigned long size, ofs; + struct pt_regs *regs; + int leaf; + + if (!stack_page) + return 0; + + /* + * IRQ stacks start at IRQ_STACK_START + * task stacks at THREAD_SIZE - 32 + */ + low = stack_page; + if (!preemptible() && on_irq_stack(raw_smp_processor_id(), *sp)) { + high = stack_page + IRQ_STACK_START; + irq_stack_high = high; + } else { + high = stack_page + THREAD_SIZE - 32; + irq_stack_high = 0; + } + + /* + * If we reached the top of the interrupt stack, start unwinding + * the interrupted task stack. + */ + if (unlikely(*sp == irq_stack_high)) { + unsigned long task_sp = *(unsigned long *)*sp; + + /* + * Check that the pointer saved in the IRQ stack head points to + * something within the stack of the current task + */ + if (!object_is_on_stack((void *)task_sp)) + return 0; + + /* + * Follow pointer to tasks kernel stack frame where interrupted + * state was saved. + */ + regs = (struct pt_regs *)task_sp; + pc = regs->cp0_epc; + if (!user_mode(regs) && __kernel_text_address(pc)) { + *sp = regs->regs[29]; + *ra = regs->regs[31]; + return pc; + } + return 0; + } + if (!kallsyms_lookup_size_offset(pc, &size, &ofs)) + return 0; + /* + * Return ra if an exception occurred at the first instruction + */ + if (unlikely(ofs == 0)) { + pc = *ra; + *ra = 0; + return pc; + } + + info.func = (void *)(pc - ofs); + info.func_size = ofs; /* analyze from start to ofs */ + leaf = get_frame_info(&info); + if (leaf < 0) + return 0; + + if (*sp < low || *sp + info.frame_size > high) + return 0; + + if (leaf) + /* + * For some extreme cases, get_frame_info() can + * consider wrongly a nested function as a leaf + * one. In that cases avoid to return always the + * same value. + */ + pc = pc != *ra ? *ra : 0; + else + pc = ((unsigned long *)(*sp))[info.pc_offset]; + + *sp += info.frame_size; + *ra = 0; + return __kernel_text_address(pc) ? pc : 0; +} +EXPORT_SYMBOL(unwind_stack_by_address); + +/* used by show_backtrace() */ +unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, + unsigned long pc, unsigned long *ra) +{ + unsigned long stack_page = 0; + int cpu; + + for_each_possible_cpu(cpu) { + if (on_irq_stack(cpu, *sp)) { + stack_page = (unsigned long)irq_stack[cpu]; + break; + } + } + + if (!stack_page) + stack_page = (unsigned long)task_stack_page(task); + + return unwind_stack_by_address(stack_page, sp, pc, ra); +} +#endif + +/* + * get_wchan - a maintenance nightmare^W^Wpain in the ass ... + */ +unsigned long get_wchan(struct task_struct *task) +{ + unsigned long pc = 0; +#ifdef CONFIG_KALLSYMS + unsigned long sp; + unsigned long ra = 0; +#endif + + if (!task || task == current || task->state == TASK_RUNNING) + goto out; + if (!task_stack_page(task)) + goto out; + + pc = thread_saved_pc(task); + +#ifdef CONFIG_KALLSYMS + sp = task->thread.reg29 + schedule_mfi.frame_size; + + while (in_sched_functions(pc)) + pc = unwind_stack(task, &sp, pc, &ra); +#endif + +out: + return pc; +} + +unsigned long mips_stack_top(void) +{ + unsigned long top = TASK_SIZE & PAGE_MASK; + + if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) { + /* One page for branch delay slot "emulation" */ + top -= PAGE_SIZE; + } + + /* Space for the VDSO, data page & GIC user page */ + top -= PAGE_ALIGN(current->thread.abi->vdso->size); + top -= PAGE_SIZE; + top -= mips_gic_present() ? PAGE_SIZE : 0; + + /* Space for cache colour alignment */ + if (cpu_has_dc_aliases) + top -= shm_align_mask + 1; + + /* Space to randomize the VDSO base */ + if (current->flags & PF_RANDOMIZE) + top -= VDSO_RANDOMIZE_SIZE; + + return top; +} + +/* + * Don't forget that the stack pointer must be aligned on a 8 bytes + * boundary for 32-bits ABI and 16 bytes for 64-bits ABI. + */ +unsigned long arch_align_stack(unsigned long sp) +{ + if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) + sp -= get_random_int() & ~PAGE_MASK; + + return sp & ALMASK; +} + +static DEFINE_PER_CPU(call_single_data_t, backtrace_csd); +static struct cpumask backtrace_csd_busy; + +static void handle_backtrace(void *info) +{ + nmi_cpu_backtrace(get_irq_regs()); + cpumask_clear_cpu(smp_processor_id(), &backtrace_csd_busy); +} + +static void raise_backtrace(cpumask_t *mask) +{ + call_single_data_t *csd; + int cpu; + + for_each_cpu(cpu, mask) { + /* + * If we previously sent an IPI to the target CPU & it hasn't + * cleared its bit in the busy cpumask then it didn't handle + * our previous IPI & it's not safe for us to reuse the + * call_single_data_t. + */ + if (cpumask_test_and_set_cpu(cpu, &backtrace_csd_busy)) { + pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n", + cpu); + continue; + } + + csd = &per_cpu(backtrace_csd, cpu); + csd->func = handle_backtrace; + smp_call_function_single_async(cpu, csd); + } +} + +void arch_trigger_cpumask_backtrace(const cpumask_t *mask, bool exclude_self) +{ + nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace); +} + +int mips_get_process_fp_mode(struct task_struct *task) +{ + int value = 0; + + if (!test_tsk_thread_flag(task, TIF_32BIT_FPREGS)) + value |= PR_FP_MODE_FR; + if (test_tsk_thread_flag(task, TIF_HYBRID_FPREGS)) + value |= PR_FP_MODE_FRE; + + return value; +} + +static long prepare_for_fp_mode_switch(void *unused) +{ + /* + * This is icky, but we use this to simply ensure that all CPUs have + * context switched, regardless of whether they were previously running + * kernel or user code. This ensures that no CPU that a mode-switching + * program may execute on keeps its FPU enabled (& in the old mode) + * throughout the mode switch. + */ + return 0; +} + +int mips_set_process_fp_mode(struct task_struct *task, unsigned int value) +{ + const unsigned int known_bits = PR_FP_MODE_FR | PR_FP_MODE_FRE; + struct task_struct *t; + struct cpumask process_cpus; + int cpu; + + /* If nothing to change, return right away, successfully. */ + if (value == mips_get_process_fp_mode(task)) + return 0; + + /* Only accept a mode change if 64-bit FP enabled for o32. */ + if (!IS_ENABLED(CONFIG_MIPS_O32_FP64_SUPPORT)) + return -EOPNOTSUPP; + + /* And only for o32 tasks. */ + if (IS_ENABLED(CONFIG_64BIT) && !test_thread_flag(TIF_32BIT_REGS)) + return -EOPNOTSUPP; + + /* Check the value is valid */ + if (value & ~known_bits) + return -EOPNOTSUPP; + + /* Setting FRE without FR is not supported. */ + if ((value & (PR_FP_MODE_FR | PR_FP_MODE_FRE)) == PR_FP_MODE_FRE) + return -EOPNOTSUPP; + + /* Avoid inadvertently triggering emulation */ + if ((value & PR_FP_MODE_FR) && raw_cpu_has_fpu && + !(raw_current_cpu_data.fpu_id & MIPS_FPIR_F64)) + return -EOPNOTSUPP; + if ((value & PR_FP_MODE_FRE) && raw_cpu_has_fpu && !cpu_has_fre) + return -EOPNOTSUPP; + + /* FR = 0 not supported in MIPS R6 */ + if (!(value & PR_FP_MODE_FR) && raw_cpu_has_fpu && cpu_has_mips_r6) + return -EOPNOTSUPP; + + /* Indicate the new FP mode in each thread */ + for_each_thread(task, t) { + /* Update desired FP register width */ + if (value & PR_FP_MODE_FR) { + clear_tsk_thread_flag(t, TIF_32BIT_FPREGS); + } else { + set_tsk_thread_flag(t, TIF_32BIT_FPREGS); + clear_tsk_thread_flag(t, TIF_MSA_CTX_LIVE); + } + + /* Update desired FP single layout */ + if (value & PR_FP_MODE_FRE) + set_tsk_thread_flag(t, TIF_HYBRID_FPREGS); + else + clear_tsk_thread_flag(t, TIF_HYBRID_FPREGS); + } + + /* + * We need to ensure that all threads in the process have switched mode + * before returning, in order to allow userland to not worry about + * races. We can do this by forcing all CPUs that any thread in the + * process may be running on to schedule something else - in this case + * prepare_for_fp_mode_switch(). + * + * We begin by generating a mask of all CPUs that any thread in the + * process may be running on. + */ + cpumask_clear(&process_cpus); + for_each_thread(task, t) + cpumask_set_cpu(task_cpu(t), &process_cpus); + + /* + * Now we schedule prepare_for_fp_mode_switch() on each of those CPUs. + * + * The CPUs may have rescheduled already since we switched mode or + * generated the cpumask, but that doesn't matter. If the task in this + * process is scheduled out then our scheduling + * prepare_for_fp_mode_switch() will simply be redundant. If it's + * scheduled in then it will already have picked up the new FP mode + * whilst doing so. + */ + get_online_cpus(); + for_each_cpu_and(cpu, &process_cpus, cpu_online_mask) + work_on_cpu(cpu, prepare_for_fp_mode_switch, NULL); + put_online_cpus(); + + return 0; +} + +#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32) +void mips_dump_regs32(u32 *uregs, const struct pt_regs *regs) +{ + unsigned int i; + + for (i = MIPS32_EF_R1; i <= MIPS32_EF_R31; i++) { + /* k0/k1 are copied as zero. */ + if (i == MIPS32_EF_R26 || i == MIPS32_EF_R27) + uregs[i] = 0; + else + uregs[i] = regs->regs[i - MIPS32_EF_R0]; + } + + uregs[MIPS32_EF_LO] = regs->lo; + uregs[MIPS32_EF_HI] = regs->hi; + uregs[MIPS32_EF_CP0_EPC] = regs->cp0_epc; + uregs[MIPS32_EF_CP0_BADVADDR] = regs->cp0_badvaddr; + uregs[MIPS32_EF_CP0_STATUS] = regs->cp0_status; + uregs[MIPS32_EF_CP0_CAUSE] = regs->cp0_cause; +} +#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */ + +#ifdef CONFIG_64BIT +void mips_dump_regs64(u64 *uregs, const struct pt_regs *regs) +{ + unsigned int i; + + for (i = MIPS64_EF_R1; i <= MIPS64_EF_R31; i++) { + /* k0/k1 are copied as zero. */ + if (i == MIPS64_EF_R26 || i == MIPS64_EF_R27) + uregs[i] = 0; + else + uregs[i] = regs->regs[i - MIPS64_EF_R0]; + } + + uregs[MIPS64_EF_LO] = regs->lo; + uregs[MIPS64_EF_HI] = regs->hi; + uregs[MIPS64_EF_CP0_EPC] = regs->cp0_epc; + uregs[MIPS64_EF_CP0_BADVADDR] = regs->cp0_badvaddr; + uregs[MIPS64_EF_CP0_STATUS] = regs->cp0_status; + uregs[MIPS64_EF_CP0_CAUSE] = regs->cp0_cause; +} +#endif /* CONFIG_64BIT */ diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c new file mode 100644 index 000000000..6abebd57b --- /dev/null +++ b/arch/mips/kernel/prom.c @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * MIPS support for CONFIG_OF device tree support + * + * Copyright (C) 2010 Cisco Systems Inc. <dediao@cisco.com> + */ + +#include <linux/init.h> +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/memblock.h> +#include <linux/debugfs.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_platform.h> + +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/prom.h> + +static char mips_machine_name[64] = "Unknown"; + +__init void mips_set_machine_name(const char *name) +{ + if (name == NULL) + return; + + strlcpy(mips_machine_name, name, sizeof(mips_machine_name)); + pr_info("MIPS: machine is %s\n", mips_get_machine_name()); +} + +char *mips_get_machine_name(void) +{ + return mips_machine_name; +} + +#ifdef CONFIG_USE_OF + +void __init __dt_setup_arch(void *bph) +{ + if (!early_init_dt_scan(bph)) + return; + + mips_set_machine_name(of_flat_dt_get_machine_name()); +} + +int __init __dt_register_buses(const char *bus0, const char *bus1) +{ + static struct of_device_id of_ids[3]; + + if (!of_have_populated_dt()) + panic("device tree not present"); + + strlcpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible)); + if (bus1) { + strlcpy(of_ids[1].compatible, bus1, + sizeof(of_ids[1].compatible)); + } + + if (of_platform_populate(NULL, of_ids, NULL, NULL)) + panic("failed to populate DT"); + + return 0; +} + +#endif diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c new file mode 100644 index 000000000..db7c5be1d --- /dev/null +++ b/arch/mips/kernel/ptrace.c @@ -0,0 +1,1382 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 Ross Biro + * Copyright (C) Linus Torvalds + * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle + * Copyright (C) 1996 David S. Miller + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999 MIPS Technologies, Inc. + * Copyright (C) 2000 Ulf Carlsson + * + * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit + * binaries. + */ +#include <linux/compiler.h> +#include <linux/context_tracking.h> +#include <linux/elf.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/sched/task_stack.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/regset.h> +#include <linux/smp.h> +#include <linux/security.h> +#include <linux/stddef.h> +#include <linux/tracehook.h> +#include <linux/audit.h> +#include <linux/seccomp.h> +#include <linux/ftrace.h> + +#include <asm/byteorder.h> +#include <asm/cpu.h> +#include <asm/cpu-info.h> +#include <asm/dsp.h> +#include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/page.h> +#include <asm/processor.h> +#include <asm/syscall.h> +#include <linux/uaccess.h> +#include <asm/bootinfo.h> +#include <asm/reg.h> + +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure single step bits etc are not set. + */ +void ptrace_disable(struct task_struct *child) +{ + /* Don't load the watchpoint registers for the ex-child. */ + clear_tsk_thread_flag(child, TIF_LOAD_WATCH); +} + +/* + * Read a general register set. We always use the 64-bit format, even + * for 32-bit kernels and for 32-bit processes on a 64-bit kernel. + * Registers are sign extended to fill the available space. + */ +int ptrace_getregs(struct task_struct *child, struct user_pt_regs __user *data) +{ + struct pt_regs *regs; + int i; + + if (!access_ok(data, 38 * 8)) + return -EIO; + + regs = task_pt_regs(child); + + for (i = 0; i < 32; i++) + __put_user((long)regs->regs[i], (__s64 __user *)&data->regs[i]); + __put_user((long)regs->lo, (__s64 __user *)&data->lo); + __put_user((long)regs->hi, (__s64 __user *)&data->hi); + __put_user((long)regs->cp0_epc, (__s64 __user *)&data->cp0_epc); + __put_user((long)regs->cp0_badvaddr, (__s64 __user *)&data->cp0_badvaddr); + __put_user((long)regs->cp0_status, (__s64 __user *)&data->cp0_status); + __put_user((long)regs->cp0_cause, (__s64 __user *)&data->cp0_cause); + + return 0; +} + +/* + * Write a general register set. As for PTRACE_GETREGS, we always use + * the 64-bit format. On a 32-bit kernel only the lower order half + * (according to endianness) will be used. + */ +int ptrace_setregs(struct task_struct *child, struct user_pt_regs __user *data) +{ + struct pt_regs *regs; + int i; + + if (!access_ok(data, 38 * 8)) + return -EIO; + + regs = task_pt_regs(child); + + for (i = 0; i < 32; i++) + __get_user(regs->regs[i], (__s64 __user *)&data->regs[i]); + __get_user(regs->lo, (__s64 __user *)&data->lo); + __get_user(regs->hi, (__s64 __user *)&data->hi); + __get_user(regs->cp0_epc, (__s64 __user *)&data->cp0_epc); + + /* badvaddr, status, and cause may not be written. */ + + /* System call number may have been changed */ + mips_syscall_update_nr(child, regs); + + return 0; +} + +int ptrace_get_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr) +{ + enum pt_watch_style style; + int i; + + if (!cpu_has_watch || boot_cpu_data.watch_reg_use_cnt == 0) + return -EIO; + if (!access_ok(addr, sizeof(struct pt_watch_regs))) + return -EIO; + +#ifdef CONFIG_32BIT + style = pt_watch_style_mips32; +#define WATCH_STYLE mips32 +#else + style = pt_watch_style_mips64; +#define WATCH_STYLE mips64 +#endif + + __put_user(style, &addr->style); + __put_user(boot_cpu_data.watch_reg_use_cnt, + &addr->WATCH_STYLE.num_valid); + for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) { + __put_user(child->thread.watch.mips3264.watchlo[i], + &addr->WATCH_STYLE.watchlo[i]); + __put_user(child->thread.watch.mips3264.watchhi[i] & + (MIPS_WATCHHI_MASK | MIPS_WATCHHI_IRW), + &addr->WATCH_STYLE.watchhi[i]); + __put_user(boot_cpu_data.watch_reg_masks[i], + &addr->WATCH_STYLE.watch_masks[i]); + } + for (; i < 8; i++) { + __put_user(0, &addr->WATCH_STYLE.watchlo[i]); + __put_user(0, &addr->WATCH_STYLE.watchhi[i]); + __put_user(0, &addr->WATCH_STYLE.watch_masks[i]); + } + + return 0; +} + +int ptrace_set_watch_regs(struct task_struct *child, + struct pt_watch_regs __user *addr) +{ + int i; + int watch_active = 0; + unsigned long lt[NUM_WATCH_REGS]; + u16 ht[NUM_WATCH_REGS]; + + if (!cpu_has_watch || boot_cpu_data.watch_reg_use_cnt == 0) + return -EIO; + if (!access_ok(addr, sizeof(struct pt_watch_regs))) + return -EIO; + /* Check the values. */ + for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) { + __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]); +#ifdef CONFIG_32BIT + if (lt[i] & __UA_LIMIT) + return -EINVAL; +#else + if (test_tsk_thread_flag(child, TIF_32BIT_ADDR)) { + if (lt[i] & 0xffffffff80000000UL) + return -EINVAL; + } else { + if (lt[i] & __UA_LIMIT) + return -EINVAL; + } +#endif + __get_user(ht[i], &addr->WATCH_STYLE.watchhi[i]); + if (ht[i] & ~MIPS_WATCHHI_MASK) + return -EINVAL; + } + /* Install them. */ + for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) { + if (lt[i] & MIPS_WATCHLO_IRW) + watch_active = 1; + child->thread.watch.mips3264.watchlo[i] = lt[i]; + /* Set the G bit. */ + child->thread.watch.mips3264.watchhi[i] = ht[i]; + } + + if (watch_active) + set_tsk_thread_flag(child, TIF_LOAD_WATCH); + else + clear_tsk_thread_flag(child, TIF_LOAD_WATCH); + + return 0; +} + +/* regset get/set implementations */ + +#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32) + +static int gpr32_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + struct pt_regs *regs = task_pt_regs(target); + u32 uregs[ELF_NGREG] = {}; + + mips_dump_regs32(uregs, regs); + return membuf_write(&to, uregs, sizeof(uregs)); +} + +static int gpr32_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct pt_regs *regs = task_pt_regs(target); + u32 uregs[ELF_NGREG]; + unsigned start, num_regs, i; + int err; + + start = pos / sizeof(u32); + num_regs = count / sizeof(u32); + + if (start + num_regs > ELF_NGREG) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0, + sizeof(uregs)); + if (err) + return err; + + for (i = start; i < num_regs; i++) { + /* + * Cast all values to signed here so that if this is a 64-bit + * kernel, the supplied 32-bit values will be sign extended. + */ + switch (i) { + case MIPS32_EF_R1 ... MIPS32_EF_R25: + /* k0/k1 are ignored. */ + case MIPS32_EF_R28 ... MIPS32_EF_R31: + regs->regs[i - MIPS32_EF_R0] = (s32)uregs[i]; + break; + case MIPS32_EF_LO: + regs->lo = (s32)uregs[i]; + break; + case MIPS32_EF_HI: + regs->hi = (s32)uregs[i]; + break; + case MIPS32_EF_CP0_EPC: + regs->cp0_epc = (s32)uregs[i]; + break; + } + } + + /* System call number may have been changed */ + mips_syscall_update_nr(target, regs); + + return 0; +} + +#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */ + +#ifdef CONFIG_64BIT + +static int gpr64_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + struct pt_regs *regs = task_pt_regs(target); + u64 uregs[ELF_NGREG] = {}; + + mips_dump_regs64(uregs, regs); + return membuf_write(&to, uregs, sizeof(uregs)); +} + +static int gpr64_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct pt_regs *regs = task_pt_regs(target); + u64 uregs[ELF_NGREG]; + unsigned start, num_regs, i; + int err; + + start = pos / sizeof(u64); + num_regs = count / sizeof(u64); + + if (start + num_regs > ELF_NGREG) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, uregs, 0, + sizeof(uregs)); + if (err) + return err; + + for (i = start; i < num_regs; i++) { + switch (i) { + case MIPS64_EF_R1 ... MIPS64_EF_R25: + /* k0/k1 are ignored. */ + case MIPS64_EF_R28 ... MIPS64_EF_R31: + regs->regs[i - MIPS64_EF_R0] = uregs[i]; + break; + case MIPS64_EF_LO: + regs->lo = uregs[i]; + break; + case MIPS64_EF_HI: + regs->hi = uregs[i]; + break; + case MIPS64_EF_CP0_EPC: + regs->cp0_epc = uregs[i]; + break; + } + } + + /* System call number may have been changed */ + mips_syscall_update_nr(target, regs); + + return 0; +} + +#endif /* CONFIG_64BIT */ + + +#ifdef CONFIG_MIPS_FP_SUPPORT + +/* + * Poke at FCSR according to its mask. Set the Cause bits even + * if a corresponding Enable bit is set. This will be noticed at + * the time the thread is switched to and SIGFPE thrown accordingly. + */ +static void ptrace_setfcr31(struct task_struct *child, u32 value) +{ + u32 fcr31; + u32 mask; + + fcr31 = child->thread.fpu.fcr31; + mask = boot_cpu_data.fpu_msk31; + child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask); +} + +int ptrace_getfpregs(struct task_struct *child, __u32 __user *data) +{ + int i; + + if (!access_ok(data, 33 * 8)) + return -EIO; + + if (tsk_used_math(child)) { + union fpureg *fregs = get_fpu_regs(child); + for (i = 0; i < 32; i++) + __put_user(get_fpr64(&fregs[i], 0), + i + (__u64 __user *)data); + } else { + for (i = 0; i < 32; i++) + __put_user((__u64) -1, i + (__u64 __user *) data); + } + + __put_user(child->thread.fpu.fcr31, data + 64); + __put_user(boot_cpu_data.fpu_id, data + 65); + + return 0; +} + +int ptrace_setfpregs(struct task_struct *child, __u32 __user *data) +{ + union fpureg *fregs; + u64 fpr_val; + u32 value; + int i; + + if (!access_ok(data, 33 * 8)) + return -EIO; + + init_fp_ctx(child); + fregs = get_fpu_regs(child); + + for (i = 0; i < 32; i++) { + __get_user(fpr_val, i + (__u64 __user *)data); + set_fpr64(&fregs[i], 0, fpr_val); + } + + __get_user(value, data + 64); + ptrace_setfcr31(child, value); + + /* FIR may not be written. */ + + return 0; +} + +/* + * Copy the floating-point context to the supplied NT_PRFPREG buffer, + * !CONFIG_CPU_HAS_MSA variant. FP context's general register slots + * correspond 1:1 to buffer slots. Only general registers are copied. + */ +static void fpr_get_fpa(struct task_struct *target, + struct membuf *to) +{ + membuf_write(to, &target->thread.fpu, + NUM_FPU_REGS * sizeof(elf_fpreg_t)); +} + +/* + * Copy the floating-point context to the supplied NT_PRFPREG buffer, + * CONFIG_CPU_HAS_MSA variant. Only lower 64 bits of FP context's + * general register slots are copied to buffer slots. Only general + * registers are copied. + */ +static void fpr_get_msa(struct task_struct *target, struct membuf *to) +{ + unsigned int i; + + BUILD_BUG_ON(sizeof(u64) != sizeof(elf_fpreg_t)); + for (i = 0; i < NUM_FPU_REGS; i++) + membuf_store(to, get_fpr64(&target->thread.fpu.fpr[i], 0)); +} + +/* + * Copy the floating-point context to the supplied NT_PRFPREG buffer. + * Choose the appropriate helper for general registers, and then copy + * the FCSR and FIR registers separately. + */ +static int fpr_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t)) + fpr_get_fpa(target, &to); + else + fpr_get_msa(target, &to); + + membuf_write(&to, &target->thread.fpu.fcr31, sizeof(u32)); + membuf_write(&to, &boot_cpu_data.fpu_id, sizeof(u32)); + return 0; +} + +/* + * Copy the supplied NT_PRFPREG buffer to the floating-point context, + * !CONFIG_CPU_HAS_MSA variant. Buffer slots correspond 1:1 to FP + * context's general register slots. Only general registers are copied. + */ +static int fpr_set_fpa(struct task_struct *target, + unsigned int *pos, unsigned int *count, + const void **kbuf, const void __user **ubuf) +{ + return user_regset_copyin(pos, count, kbuf, ubuf, + &target->thread.fpu, + 0, NUM_FPU_REGS * sizeof(elf_fpreg_t)); +} + +/* + * Copy the supplied NT_PRFPREG buffer to the floating-point context, + * CONFIG_CPU_HAS_MSA variant. Buffer slots are copied to lower 64 + * bits only of FP context's general register slots. Only general + * registers are copied. + */ +static int fpr_set_msa(struct task_struct *target, + unsigned int *pos, unsigned int *count, + const void **kbuf, const void __user **ubuf) +{ + unsigned int i; + u64 fpr_val; + int err; + + BUILD_BUG_ON(sizeof(fpr_val) != sizeof(elf_fpreg_t)); + for (i = 0; i < NUM_FPU_REGS && *count > 0; i++) { + err = user_regset_copyin(pos, count, kbuf, ubuf, + &fpr_val, i * sizeof(elf_fpreg_t), + (i + 1) * sizeof(elf_fpreg_t)); + if (err) + return err; + set_fpr64(&target->thread.fpu.fpr[i], 0, fpr_val); + } + + return 0; +} + +/* + * Copy the supplied NT_PRFPREG buffer to the floating-point context. + * Choose the appropriate helper for general registers, and then copy + * the FCSR register separately. Ignore the incoming FIR register + * contents though, as the register is read-only. + * + * We optimize for the case where `count % sizeof(elf_fpreg_t) == 0', + * which is supposed to have been guaranteed by the kernel before + * calling us, e.g. in `ptrace_regset'. We enforce that requirement, + * so that we can safely avoid preinitializing temporaries for + * partial register writes. + */ +static int fpr_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + const int fcr31_pos = NUM_FPU_REGS * sizeof(elf_fpreg_t); + const int fir_pos = fcr31_pos + sizeof(u32); + u32 fcr31; + int err; + + BUG_ON(count % sizeof(elf_fpreg_t)); + + if (pos + count > sizeof(elf_fpregset_t)) + return -EIO; + + init_fp_ctx(target); + + if (sizeof(target->thread.fpu.fpr[0]) == sizeof(elf_fpreg_t)) + err = fpr_set_fpa(target, &pos, &count, &kbuf, &ubuf); + else + err = fpr_set_msa(target, &pos, &count, &kbuf, &ubuf); + if (err) + return err; + + if (count > 0) { + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &fcr31, + fcr31_pos, fcr31_pos + sizeof(u32)); + if (err) + return err; + + ptrace_setfcr31(target, fcr31); + } + + if (count > 0) + err = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + fir_pos, + fir_pos + sizeof(u32)); + + return err; +} + +/* Copy the FP mode setting to the supplied NT_MIPS_FP_MODE buffer. */ +static int fp_mode_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + return membuf_store(&to, (int)mips_get_process_fp_mode(target)); +} + +/* + * Copy the supplied NT_MIPS_FP_MODE buffer to the FP mode setting. + * + * We optimize for the case where `count % sizeof(int) == 0', which + * is supposed to have been guaranteed by the kernel before calling + * us, e.g. in `ptrace_regset'. We enforce that requirement, so + * that we can safely avoid preinitializing temporaries for partial + * mode writes. + */ +static int fp_mode_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + int fp_mode; + int err; + + BUG_ON(count % sizeof(int)); + + if (pos + count > sizeof(fp_mode)) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &fp_mode, 0, + sizeof(fp_mode)); + if (err) + return err; + + if (count > 0) + err = mips_set_process_fp_mode(target, fp_mode); + + return err; +} + +#endif /* CONFIG_MIPS_FP_SUPPORT */ + +#ifdef CONFIG_CPU_HAS_MSA + +struct msa_control_regs { + unsigned int fir; + unsigned int fcsr; + unsigned int msair; + unsigned int msacsr; +}; + +static void copy_pad_fprs(struct task_struct *target, + const struct user_regset *regset, + struct membuf *to, + unsigned int live_sz) +{ + int i, j; + unsigned long long fill = ~0ull; + unsigned int cp_sz, pad_sz; + + cp_sz = min(regset->size, live_sz); + pad_sz = regset->size - cp_sz; + WARN_ON(pad_sz % sizeof(fill)); + + for (i = 0; i < NUM_FPU_REGS; i++) { + membuf_write(to, &target->thread.fpu.fpr[i], cp_sz); + for (j = 0; j < (pad_sz / sizeof(fill)); j++) + membuf_store(to, fill); + } +} + +static int msa_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + const unsigned int wr_size = NUM_FPU_REGS * regset->size; + const struct msa_control_regs ctrl_regs = { + .fir = boot_cpu_data.fpu_id, + .fcsr = target->thread.fpu.fcr31, + .msair = boot_cpu_data.msa_id, + .msacsr = target->thread.fpu.msacsr, + }; + + if (!tsk_used_math(target)) { + /* The task hasn't used FP or MSA, fill with 0xff */ + copy_pad_fprs(target, regset, &to, 0); + } else if (!test_tsk_thread_flag(target, TIF_MSA_CTX_LIVE)) { + /* Copy scalar FP context, fill the rest with 0xff */ + copy_pad_fprs(target, regset, &to, 8); + } else if (sizeof(target->thread.fpu.fpr[0]) == regset->size) { + /* Trivially copy the vector registers */ + membuf_write(&to, &target->thread.fpu.fpr, wr_size); + } else { + /* Copy as much context as possible, fill the rest with 0xff */ + copy_pad_fprs(target, regset, &to, + sizeof(target->thread.fpu.fpr[0])); + } + + return membuf_write(&to, &ctrl_regs, sizeof(ctrl_regs)); +} + +static int msa_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + const unsigned int wr_size = NUM_FPU_REGS * regset->size; + struct msa_control_regs ctrl_regs; + unsigned int cp_sz; + int i, err, start; + + init_fp_ctx(target); + + if (sizeof(target->thread.fpu.fpr[0]) == regset->size) { + /* Trivially copy the vector registers */ + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &target->thread.fpu.fpr, + 0, wr_size); + } else { + /* Copy as much context as possible */ + cp_sz = min_t(unsigned int, regset->size, + sizeof(target->thread.fpu.fpr[0])); + + i = start = err = 0; + for (; i < NUM_FPU_REGS; i++, start += regset->size) { + err |= user_regset_copyin(&pos, &count, &kbuf, &ubuf, + &target->thread.fpu.fpr[i], + start, start + cp_sz); + } + } + + if (!err) + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &ctrl_regs, + wr_size, wr_size + sizeof(ctrl_regs)); + if (!err) { + target->thread.fpu.fcr31 = ctrl_regs.fcsr & ~FPU_CSR_ALL_X; + target->thread.fpu.msacsr = ctrl_regs.msacsr & ~MSA_CSR_CAUSEF; + } + + return err; +} + +#endif /* CONFIG_CPU_HAS_MSA */ + +#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32) + +/* + * Copy the DSP context to the supplied 32-bit NT_MIPS_DSP buffer. + */ +static int dsp32_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + u32 dspregs[NUM_DSP_REGS + 1]; + unsigned int i; + + BUG_ON(to.left % sizeof(u32)); + + if (!cpu_has_dsp) + return -EIO; + + for (i = 0; i < NUM_DSP_REGS; i++) + dspregs[i] = target->thread.dsp.dspr[i]; + dspregs[NUM_DSP_REGS] = target->thread.dsp.dspcontrol; + return membuf_write(&to, dspregs, sizeof(dspregs)); +} + +/* + * Copy the supplied 32-bit NT_MIPS_DSP buffer to the DSP context. + */ +static int dsp32_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + unsigned int start, num_regs, i; + u32 dspregs[NUM_DSP_REGS + 1]; + int err; + + BUG_ON(count % sizeof(u32)); + + if (!cpu_has_dsp) + return -EIO; + + start = pos / sizeof(u32); + num_regs = count / sizeof(u32); + + if (start + num_regs > NUM_DSP_REGS + 1) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, dspregs, 0, + sizeof(dspregs)); + if (err) + return err; + + for (i = start; i < num_regs; i++) + switch (i) { + case 0 ... NUM_DSP_REGS - 1: + target->thread.dsp.dspr[i] = (s32)dspregs[i]; + break; + case NUM_DSP_REGS: + target->thread.dsp.dspcontrol = (s32)dspregs[i]; + break; + } + + return 0; +} + +#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */ + +#ifdef CONFIG_64BIT + +/* + * Copy the DSP context to the supplied 64-bit NT_MIPS_DSP buffer. + */ +static int dsp64_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + u64 dspregs[NUM_DSP_REGS + 1]; + unsigned int i; + + BUG_ON(to.left % sizeof(u64)); + + if (!cpu_has_dsp) + return -EIO; + + for (i = 0; i < NUM_DSP_REGS; i++) + dspregs[i] = target->thread.dsp.dspr[i]; + dspregs[NUM_DSP_REGS] = target->thread.dsp.dspcontrol; + return membuf_write(&to, dspregs, sizeof(dspregs)); +} + +/* + * Copy the supplied 64-bit NT_MIPS_DSP buffer to the DSP context. + */ +static int dsp64_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + unsigned int start, num_regs, i; + u64 dspregs[NUM_DSP_REGS + 1]; + int err; + + BUG_ON(count % sizeof(u64)); + + if (!cpu_has_dsp) + return -EIO; + + start = pos / sizeof(u64); + num_regs = count / sizeof(u64); + + if (start + num_regs > NUM_DSP_REGS + 1) + return -EIO; + + err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, dspregs, 0, + sizeof(dspregs)); + if (err) + return err; + + for (i = start; i < num_regs; i++) + switch (i) { + case 0 ... NUM_DSP_REGS - 1: + target->thread.dsp.dspr[i] = dspregs[i]; + break; + case NUM_DSP_REGS: + target->thread.dsp.dspcontrol = dspregs[i]; + break; + } + + return 0; +} + +#endif /* CONFIG_64BIT */ + +/* + * Determine whether the DSP context is present. + */ +static int dsp_active(struct task_struct *target, + const struct user_regset *regset) +{ + return cpu_has_dsp ? NUM_DSP_REGS + 1 : -ENODEV; +} + +enum mips_regset { + REGSET_GPR, + REGSET_DSP, +#ifdef CONFIG_MIPS_FP_SUPPORT + REGSET_FPR, + REGSET_FP_MODE, +#endif +#ifdef CONFIG_CPU_HAS_MSA + REGSET_MSA, +#endif +}; + +struct pt_regs_offset { + const char *name; + int offset; +}; + +#define REG_OFFSET_NAME(reg, r) { \ + .name = #reg, \ + .offset = offsetof(struct pt_regs, r) \ +} + +#define REG_OFFSET_END { \ + .name = NULL, \ + .offset = 0 \ +} + +static const struct pt_regs_offset regoffset_table[] = { + REG_OFFSET_NAME(r0, regs[0]), + REG_OFFSET_NAME(r1, regs[1]), + REG_OFFSET_NAME(r2, regs[2]), + REG_OFFSET_NAME(r3, regs[3]), + REG_OFFSET_NAME(r4, regs[4]), + REG_OFFSET_NAME(r5, regs[5]), + REG_OFFSET_NAME(r6, regs[6]), + REG_OFFSET_NAME(r7, regs[7]), + REG_OFFSET_NAME(r8, regs[8]), + REG_OFFSET_NAME(r9, regs[9]), + REG_OFFSET_NAME(r10, regs[10]), + REG_OFFSET_NAME(r11, regs[11]), + REG_OFFSET_NAME(r12, regs[12]), + REG_OFFSET_NAME(r13, regs[13]), + REG_OFFSET_NAME(r14, regs[14]), + REG_OFFSET_NAME(r15, regs[15]), + REG_OFFSET_NAME(r16, regs[16]), + REG_OFFSET_NAME(r17, regs[17]), + REG_OFFSET_NAME(r18, regs[18]), + REG_OFFSET_NAME(r19, regs[19]), + REG_OFFSET_NAME(r20, regs[20]), + REG_OFFSET_NAME(r21, regs[21]), + REG_OFFSET_NAME(r22, regs[22]), + REG_OFFSET_NAME(r23, regs[23]), + REG_OFFSET_NAME(r24, regs[24]), + REG_OFFSET_NAME(r25, regs[25]), + REG_OFFSET_NAME(r26, regs[26]), + REG_OFFSET_NAME(r27, regs[27]), + REG_OFFSET_NAME(r28, regs[28]), + REG_OFFSET_NAME(r29, regs[29]), + REG_OFFSET_NAME(r30, regs[30]), + REG_OFFSET_NAME(r31, regs[31]), + REG_OFFSET_NAME(c0_status, cp0_status), + REG_OFFSET_NAME(hi, hi), + REG_OFFSET_NAME(lo, lo), +#ifdef CONFIG_CPU_HAS_SMARTMIPS + REG_OFFSET_NAME(acx, acx), +#endif + REG_OFFSET_NAME(c0_badvaddr, cp0_badvaddr), + REG_OFFSET_NAME(c0_cause, cp0_cause), + REG_OFFSET_NAME(c0_epc, cp0_epc), +#ifdef CONFIG_CPU_CAVIUM_OCTEON + REG_OFFSET_NAME(mpl0, mpl[0]), + REG_OFFSET_NAME(mpl1, mpl[1]), + REG_OFFSET_NAME(mpl2, mpl[2]), + REG_OFFSET_NAME(mtp0, mtp[0]), + REG_OFFSET_NAME(mtp1, mtp[1]), + REG_OFFSET_NAME(mtp2, mtp[2]), +#endif + REG_OFFSET_END, +}; + +/** + * regs_query_register_offset() - query register offset from its name + * @name: the name of a register + * + * regs_query_register_offset() returns the offset of a register in struct + * pt_regs from its name. If the name is invalid, this returns -EINVAL; + */ +int regs_query_register_offset(const char *name) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (!strcmp(roff->name, name)) + return roff->offset; + return -EINVAL; +} + +#if defined(CONFIG_32BIT) || defined(CONFIG_MIPS32_O32) + +static const struct user_regset mips_regsets[] = { + [REGSET_GPR] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(unsigned int), + .align = sizeof(unsigned int), + .regset_get = gpr32_get, + .set = gpr32_set, + }, + [REGSET_DSP] = { + .core_note_type = NT_MIPS_DSP, + .n = NUM_DSP_REGS + 1, + .size = sizeof(u32), + .align = sizeof(u32), + .regset_get = dsp32_get, + .set = dsp32_set, + .active = dsp_active, + }, +#ifdef CONFIG_MIPS_FP_SUPPORT + [REGSET_FPR] = { + .core_note_type = NT_PRFPREG, + .n = ELF_NFPREG, + .size = sizeof(elf_fpreg_t), + .align = sizeof(elf_fpreg_t), + .regset_get = fpr_get, + .set = fpr_set, + }, + [REGSET_FP_MODE] = { + .core_note_type = NT_MIPS_FP_MODE, + .n = 1, + .size = sizeof(int), + .align = sizeof(int), + .regset_get = fp_mode_get, + .set = fp_mode_set, + }, +#endif +#ifdef CONFIG_CPU_HAS_MSA + [REGSET_MSA] = { + .core_note_type = NT_MIPS_MSA, + .n = NUM_FPU_REGS + 1, + .size = 16, + .align = 16, + .regset_get = msa_get, + .set = msa_set, + }, +#endif +}; + +static const struct user_regset_view user_mips_view = { + .name = "mips", + .e_machine = ELF_ARCH, + .ei_osabi = ELF_OSABI, + .regsets = mips_regsets, + .n = ARRAY_SIZE(mips_regsets), +}; + +#endif /* CONFIG_32BIT || CONFIG_MIPS32_O32 */ + +#ifdef CONFIG_64BIT + +static const struct user_regset mips64_regsets[] = { + [REGSET_GPR] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(unsigned long), + .align = sizeof(unsigned long), + .regset_get = gpr64_get, + .set = gpr64_set, + }, + [REGSET_DSP] = { + .core_note_type = NT_MIPS_DSP, + .n = NUM_DSP_REGS + 1, + .size = sizeof(u64), + .align = sizeof(u64), + .regset_get = dsp64_get, + .set = dsp64_set, + .active = dsp_active, + }, +#ifdef CONFIG_MIPS_FP_SUPPORT + [REGSET_FP_MODE] = { + .core_note_type = NT_MIPS_FP_MODE, + .n = 1, + .size = sizeof(int), + .align = sizeof(int), + .regset_get = fp_mode_get, + .set = fp_mode_set, + }, + [REGSET_FPR] = { + .core_note_type = NT_PRFPREG, + .n = ELF_NFPREG, + .size = sizeof(elf_fpreg_t), + .align = sizeof(elf_fpreg_t), + .regset_get = fpr_get, + .set = fpr_set, + }, +#endif +#ifdef CONFIG_CPU_HAS_MSA + [REGSET_MSA] = { + .core_note_type = NT_MIPS_MSA, + .n = NUM_FPU_REGS + 1, + .size = 16, + .align = 16, + .regset_get = msa_get, + .set = msa_set, + }, +#endif +}; + +static const struct user_regset_view user_mips64_view = { + .name = "mips64", + .e_machine = ELF_ARCH, + .ei_osabi = ELF_OSABI, + .regsets = mips64_regsets, + .n = ARRAY_SIZE(mips64_regsets), +}; + +#ifdef CONFIG_MIPS32_N32 + +static const struct user_regset_view user_mipsn32_view = { + .name = "mipsn32", + .e_flags = EF_MIPS_ABI2, + .e_machine = ELF_ARCH, + .ei_osabi = ELF_OSABI, + .regsets = mips64_regsets, + .n = ARRAY_SIZE(mips64_regsets), +}; + +#endif /* CONFIG_MIPS32_N32 */ + +#endif /* CONFIG_64BIT */ + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ +#ifdef CONFIG_32BIT + return &user_mips_view; +#else +#ifdef CONFIG_MIPS32_O32 + if (test_tsk_thread_flag(task, TIF_32BIT_REGS)) + return &user_mips_view; +#endif +#ifdef CONFIG_MIPS32_N32 + if (test_tsk_thread_flag(task, TIF_32BIT_ADDR)) + return &user_mipsn32_view; +#endif + return &user_mips64_view; +#endif +} + +long arch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data) +{ + int ret; + void __user *addrp = (void __user *) addr; + void __user *datavp = (void __user *) data; + unsigned long __user *datalp = (void __user *) data; + + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + ret = generic_ptrace_peekdata(child, addr, data); + break; + + /* Read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + struct pt_regs *regs; + unsigned long tmp = 0; + + regs = task_pt_regs(child); + ret = 0; /* Default return value. */ + + switch (addr) { + case 0 ... 31: + tmp = regs->regs[addr]; + break; +#ifdef CONFIG_MIPS_FP_SUPPORT + case FPR_BASE ... FPR_BASE + 31: { + union fpureg *fregs; + + if (!tsk_used_math(child)) { + /* FP not yet used */ + tmp = -1; + break; + } + fregs = get_fpu_regs(child); + +#ifdef CONFIG_32BIT + if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) { + /* + * The odd registers are actually the high + * order bits of the values stored in the even + * registers. + */ + tmp = get_fpr32(&fregs[(addr & ~1) - FPR_BASE], + addr & 1); + break; + } +#endif + tmp = get_fpr64(&fregs[addr - FPR_BASE], 0); + break; + } + case FPC_CSR: + tmp = child->thread.fpu.fcr31; + break; + case FPC_EIR: + /* implementation / version register */ + tmp = boot_cpu_data.fpu_id; + break; +#endif + case PC: + tmp = regs->cp0_epc; + break; + case CAUSE: + tmp = regs->cp0_cause; + break; + case BADVADDR: + tmp = regs->cp0_badvaddr; + break; + case MMHI: + tmp = regs->hi; + break; + case MMLO: + tmp = regs->lo; + break; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + case ACX: + tmp = regs->acx; + break; +#endif + case DSP_BASE ... DSP_BASE + 5: { + dspreg_t *dregs; + + if (!cpu_has_dsp) { + tmp = 0; + ret = -EIO; + goto out; + } + dregs = __get_dsp_regs(child); + tmp = dregs[addr - DSP_BASE]; + break; + } + case DSP_CONTROL: + if (!cpu_has_dsp) { + tmp = 0; + ret = -EIO; + goto out; + } + tmp = child->thread.dsp.dspcontrol; + break; + default: + tmp = 0; + ret = -EIO; + goto out; + } + ret = put_user(tmp, datalp); + break; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = generic_ptrace_pokedata(child, addr, data); + break; + + case PTRACE_POKEUSR: { + struct pt_regs *regs; + ret = 0; + regs = task_pt_regs(child); + + switch (addr) { + case 0 ... 31: + regs->regs[addr] = data; + /* System call number may have been changed */ + if (addr == 2) + mips_syscall_update_nr(child, regs); + else if (addr == 4 && + mips_syscall_is_indirect(child, regs)) + mips_syscall_update_nr(child, regs); + break; +#ifdef CONFIG_MIPS_FP_SUPPORT + case FPR_BASE ... FPR_BASE + 31: { + union fpureg *fregs = get_fpu_regs(child); + + init_fp_ctx(child); +#ifdef CONFIG_32BIT + if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) { + /* + * The odd registers are actually the high + * order bits of the values stored in the even + * registers. + */ + set_fpr32(&fregs[(addr & ~1) - FPR_BASE], + addr & 1, data); + break; + } +#endif + set_fpr64(&fregs[addr - FPR_BASE], 0, data); + break; + } + case FPC_CSR: + init_fp_ctx(child); + ptrace_setfcr31(child, data); + break; +#endif + case PC: + regs->cp0_epc = data; + break; + case MMHI: + regs->hi = data; + break; + case MMLO: + regs->lo = data; + break; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + case ACX: + regs->acx = data; + break; +#endif + case DSP_BASE ... DSP_BASE + 5: { + dspreg_t *dregs; + + if (!cpu_has_dsp) { + ret = -EIO; + break; + } + + dregs = __get_dsp_regs(child); + dregs[addr - DSP_BASE] = data; + break; + } + case DSP_CONTROL: + if (!cpu_has_dsp) { + ret = -EIO; + break; + } + child->thread.dsp.dspcontrol = data; + break; + default: + /* The rest are not allowed. */ + ret = -EIO; + break; + } + break; + } + + case PTRACE_GETREGS: + ret = ptrace_getregs(child, datavp); + break; + + case PTRACE_SETREGS: + ret = ptrace_setregs(child, datavp); + break; + +#ifdef CONFIG_MIPS_FP_SUPPORT + case PTRACE_GETFPREGS: + ret = ptrace_getfpregs(child, datavp); + break; + + case PTRACE_SETFPREGS: + ret = ptrace_setfpregs(child, datavp); + break; +#endif + case PTRACE_GET_THREAD_AREA: + ret = put_user(task_thread_info(child)->tp_value, datalp); + break; + + case PTRACE_GET_WATCH_REGS: + ret = ptrace_get_watch_regs(child, addrp); + break; + + case PTRACE_SET_WATCH_REGS: + ret = ptrace_set_watch_regs(child, addrp); + break; + + default: + ret = ptrace_request(child, request, addr, data); + break; + } + out: + return ret; +} + +/* + * Notification of system call entry/exit + * - triggered by current->work.syscall_trace + */ +asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall) +{ + user_exit(); + + current_thread_info()->syscall = syscall; + + if (test_thread_flag(TIF_SYSCALL_TRACE)) { + if (tracehook_report_syscall_entry(regs)) + return -1; + syscall = current_thread_info()->syscall; + } + +#ifdef CONFIG_SECCOMP + if (unlikely(test_thread_flag(TIF_SECCOMP))) { + int ret, i; + struct seccomp_data sd; + unsigned long args[6]; + + sd.nr = syscall; + sd.arch = syscall_get_arch(current); + syscall_get_arguments(current, regs, args); + for (i = 0; i < 6; i++) + sd.args[i] = args[i]; + sd.instruction_pointer = KSTK_EIP(current); + + ret = __secure_computing(&sd); + if (ret == -1) + return ret; + syscall = current_thread_info()->syscall; + } +#endif + + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_enter(regs, regs->regs[2]); + + audit_syscall_entry(syscall, regs->regs[4], regs->regs[5], + regs->regs[6], regs->regs[7]); + + /* + * Negative syscall numbers are mistaken for rejected syscalls, but + * won't have had the return value set appropriately, so we do so now. + */ + if (syscall < 0) + syscall_set_return_value(current, regs, -ENOSYS, 0); + return syscall; +} + +/* + * Notification of system call entry/exit + * - triggered by current->work.syscall_trace + */ +asmlinkage void syscall_trace_leave(struct pt_regs *regs) +{ + /* + * We may come here right after calling schedule_user() + * or do_notify_resume(), in which case we can be in RCU + * user mode. + */ + user_exit(); + + audit_syscall_exit(regs); + + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_exit(regs, regs_return_value(regs)); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, 0); + + user_enter(); +} diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c new file mode 100644 index 000000000..afcf27a87 --- /dev/null +++ b/arch/mips/kernel/ptrace32.c @@ -0,0 +1,317 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 Ross Biro + * Copyright (C) Linus Torvalds + * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle + * Copyright (C) 1996 David S. Miller + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999 MIPS Technologies, Inc. + * Copyright (C) 2000 Ulf Carlsson + * + * At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit + * binaries. + */ +#include <linux/compiler.h> +#include <linux/compat.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/sched/task_stack.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/smp.h> +#include <linux/security.h> + +#include <asm/cpu.h> +#include <asm/dsp.h> +#include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/page.h> +#include <asm/reg.h> +#include <asm/syscall.h> +#include <linux/uaccess.h> +#include <asm/bootinfo.h> + +/* + * Tracing a 32-bit process with a 64-bit strace and vice versa will not + * work. I don't know how to fix this. + */ +long compat_arch_ptrace(struct task_struct *child, compat_long_t request, + compat_ulong_t caddr, compat_ulong_t cdata) +{ + int addr = caddr; + int data = cdata; + int ret; + + switch (request) { + + /* + * Read 4 bytes of the other process' storage + * data is a pointer specifying where the user wants the + * 4 bytes copied into + * addr is a pointer in the user's storage that contains an 8 byte + * address in the other process of the 4 bytes that is to be read + * (this is run in a 32-bit process looking at a 64-bit process) + * when I and D space are separate, these will need to be fixed. + */ + case PTRACE_PEEKTEXT_3264: + case PTRACE_PEEKDATA_3264: { + u32 tmp; + int copied; + u32 __user * addrOthers; + + ret = -EIO; + + /* Get the addr in the other process that we want to read */ + if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0) + break; + + copied = ptrace_access_vm(child, (u64)addrOthers, &tmp, + sizeof(tmp), FOLL_FORCE); + if (copied != sizeof(tmp)) + break; + ret = put_user(tmp, (u32 __user *) (unsigned long) data); + break; + } + + /* Read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + struct pt_regs *regs; + unsigned int tmp; + + regs = task_pt_regs(child); + ret = 0; /* Default return value. */ + + switch (addr) { + case 0 ... 31: + tmp = regs->regs[addr]; + break; +#ifdef CONFIG_MIPS_FP_SUPPORT + case FPR_BASE ... FPR_BASE + 31: { + union fpureg *fregs; + + if (!tsk_used_math(child)) { + /* FP not yet used */ + tmp = -1; + break; + } + fregs = get_fpu_regs(child); + if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) { + /* + * The odd registers are actually the high + * order bits of the values stored in the even + * registers. + */ + tmp = get_fpr32(&fregs[(addr & ~1) - FPR_BASE], + addr & 1); + break; + } + tmp = get_fpr64(&fregs[addr - FPR_BASE], 0); + break; + } + case FPC_CSR: + tmp = child->thread.fpu.fcr31; + break; + case FPC_EIR: + /* implementation / version register */ + tmp = boot_cpu_data.fpu_id; + break; +#endif /* CONFIG_MIPS_FP_SUPPORT */ + case PC: + tmp = regs->cp0_epc; + break; + case CAUSE: + tmp = regs->cp0_cause; + break; + case BADVADDR: + tmp = regs->cp0_badvaddr; + break; + case MMHI: + tmp = regs->hi; + break; + case MMLO: + tmp = regs->lo; + break; + case DSP_BASE ... DSP_BASE + 5: { + dspreg_t *dregs; + + if (!cpu_has_dsp) { + tmp = 0; + ret = -EIO; + goto out; + } + dregs = __get_dsp_regs(child); + tmp = dregs[addr - DSP_BASE]; + break; + } + case DSP_CONTROL: + if (!cpu_has_dsp) { + tmp = 0; + ret = -EIO; + goto out; + } + tmp = child->thread.dsp.dspcontrol; + break; + default: + tmp = 0; + ret = -EIO; + goto out; + } + ret = put_user(tmp, (unsigned __user *) (unsigned long) data); + break; + } + + /* + * Write 4 bytes into the other process' storage + * data is the 4 bytes that the user wants written + * addr is a pointer in the user's storage that contains an + * 8 byte address in the other process where the 4 bytes + * that is to be written + * (this is run in a 32-bit process looking at a 64-bit process) + * when I and D space are separate, these will need to be fixed. + */ + case PTRACE_POKETEXT_3264: + case PTRACE_POKEDATA_3264: { + u32 __user * addrOthers; + + /* Get the addr in the other process that we want to write into */ + ret = -EIO; + if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0) + break; + ret = 0; + if (ptrace_access_vm(child, (u64)addrOthers, &data, + sizeof(data), + FOLL_FORCE | FOLL_WRITE) == sizeof(data)) + break; + ret = -EIO; + break; + } + + case PTRACE_POKEUSR: { + struct pt_regs *regs; + ret = 0; + regs = task_pt_regs(child); + + switch (addr) { + case 0 ... 31: + regs->regs[addr] = data; + /* System call number may have been changed */ + if (addr == 2) + mips_syscall_update_nr(child, regs); + else if (addr == 4 && + mips_syscall_is_indirect(child, regs)) + mips_syscall_update_nr(child, regs); + break; +#ifdef CONFIG_MIPS_FP_SUPPORT + case FPR_BASE ... FPR_BASE + 31: { + union fpureg *fregs = get_fpu_regs(child); + + if (!tsk_used_math(child)) { + /* FP not yet used */ + memset(&child->thread.fpu, ~0, + sizeof(child->thread.fpu)); + child->thread.fpu.fcr31 = 0; + } + if (test_tsk_thread_flag(child, TIF_32BIT_FPREGS)) { + /* + * The odd registers are actually the high + * order bits of the values stored in the even + * registers. + */ + set_fpr32(&fregs[(addr & ~1) - FPR_BASE], + addr & 1, data); + break; + } + set_fpr64(&fregs[addr - FPR_BASE], 0, data); + break; + } + case FPC_CSR: + child->thread.fpu.fcr31 = data; + break; +#endif /* CONFIG_MIPS_FP_SUPPORT */ + case PC: + regs->cp0_epc = data; + break; + case MMHI: + regs->hi = data; + break; + case MMLO: + regs->lo = data; + break; + case DSP_BASE ... DSP_BASE + 5: { + dspreg_t *dregs; + + if (!cpu_has_dsp) { + ret = -EIO; + break; + } + + dregs = __get_dsp_regs(child); + dregs[addr - DSP_BASE] = data; + break; + } + case DSP_CONTROL: + if (!cpu_has_dsp) { + ret = -EIO; + break; + } + child->thread.dsp.dspcontrol = data; + break; + default: + /* The rest are not allowed. */ + ret = -EIO; + break; + } + break; + } + + case PTRACE_GETREGS: + ret = ptrace_getregs(child, + (struct user_pt_regs __user *) (__u64) data); + break; + + case PTRACE_SETREGS: + ret = ptrace_setregs(child, + (struct user_pt_regs __user *) (__u64) data); + break; + +#ifdef CONFIG_MIPS_FP_SUPPORT + case PTRACE_GETFPREGS: + ret = ptrace_getfpregs(child, (__u32 __user *) (__u64) data); + break; + + case PTRACE_SETFPREGS: + ret = ptrace_setfpregs(child, (__u32 __user *) (__u64) data); + break; +#endif + case PTRACE_GET_THREAD_AREA: + ret = put_user(task_thread_info(child)->tp_value, + (unsigned int __user *) (unsigned long) data); + break; + + case PTRACE_GET_THREAD_AREA_3264: + ret = put_user(task_thread_info(child)->tp_value, + (unsigned long __user *) (unsigned long) data); + break; + + case PTRACE_GET_WATCH_REGS: + ret = ptrace_get_watch_regs(child, + (struct pt_watch_regs __user *) (unsigned long) addr); + break; + + case PTRACE_SET_WATCH_REGS: + ret = ptrace_set_watch_regs(child, + (struct pt_watch_regs __user *) (unsigned long) addr); + break; + + default: + ret = compat_ptrace_request(child, request, addr, data); + break; + } +out: + return ret; +} diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S new file mode 100644 index 000000000..cbf6db98c --- /dev/null +++ b/arch/mips/kernel/r2300_fpu.S @@ -0,0 +1,130 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1998 by Ralf Baechle + * + * Multi-arch abstraction and asm macros for easier reading: + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * + * Further modifications to make this work: + * Copyright (c) 1998 Harald Koerfgen + */ +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/errno.h> +#include <asm/export.h> +#include <asm/fpregdef.h> +#include <asm/mipsregs.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> + +#define EX(a,b) \ +9: a,##b; \ + .section __ex_table,"a"; \ + PTR 9b,fault; \ + .previous + +#define EX2(a,b) \ +9: a,##b; \ + .section __ex_table,"a"; \ + PTR 9b,fault; \ + PTR 9b+4,fault; \ + .previous + + .set mips1 + +/* + * Save a thread's fp context. + */ +LEAF(_save_fp) +EXPORT_SYMBOL(_save_fp) + fpu_save_single a0, t1 # clobbers t1 + jr ra + END(_save_fp) + +/* + * Restore a thread's fp context. + */ +LEAF(_restore_fp) + fpu_restore_single a0, t1 # clobbers t1 + jr ra + END(_restore_fp) + + .set noreorder + +/** + * _save_fp_context() - save FP context from the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Save FP context, including the 32 FP data registers and the FP + * control & status register, from the FPU to signal context. + */ +LEAF(_save_fp_context) + .set push + SET_HARDFLOAT + li v0, 0 # assume success + cfc1 t1, fcr31 + EX2(s.d $f0, 0(a0)) + EX2(s.d $f2, 16(a0)) + EX2(s.d $f4, 32(a0)) + EX2(s.d $f6, 48(a0)) + EX2(s.d $f8, 64(a0)) + EX2(s.d $f10, 80(a0)) + EX2(s.d $f12, 96(a0)) + EX2(s.d $f14, 112(a0)) + EX2(s.d $f16, 128(a0)) + EX2(s.d $f18, 144(a0)) + EX2(s.d $f20, 160(a0)) + EX2(s.d $f22, 176(a0)) + EX2(s.d $f24, 192(a0)) + EX2(s.d $f26, 208(a0)) + EX2(s.d $f28, 224(a0)) + EX2(s.d $f30, 240(a0)) + jr ra + EX(sw t1, (a1)) + .set pop + END(_save_fp_context) + +/** + * _restore_fp_context() - restore FP context to the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Restore FP context, including the 32 FP data registers and the FP + * control & status register, from signal context to the FPU. + */ +LEAF(_restore_fp_context) + .set push + SET_HARDFLOAT + li v0, 0 # assume success + EX(lw t0, (a1)) + EX2(l.d $f0, 0(a0)) + EX2(l.d $f2, 16(a0)) + EX2(l.d $f4, 32(a0)) + EX2(l.d $f6, 48(a0)) + EX2(l.d $f8, 64(a0)) + EX2(l.d $f10, 80(a0)) + EX2(l.d $f12, 96(a0)) + EX2(l.d $f14, 112(a0)) + EX2(l.d $f16, 128(a0)) + EX2(l.d $f18, 144(a0)) + EX2(l.d $f20, 160(a0)) + EX2(l.d $f22, 176(a0)) + EX2(l.d $f24, 192(a0)) + EX2(l.d $f26, 208(a0)) + EX2(l.d $f28, 224(a0)) + EX2(l.d $f30, 240(a0)) + jr ra + ctc1 t0, fcr31 + .set pop + END(_restore_fp_context) + .set reorder + + .type fault, @function + .ent fault +fault: li v0, -EFAULT + jr ra + .end fault diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S new file mode 100644 index 000000000..71b1aafae --- /dev/null +++ b/arch/mips/kernel/r2300_switch.S @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * r2300_switch.S: R2300 specific task switching code. + * + * Copyright (C) 1994, 1995, 1996, 1999 by Ralf Baechle + * Copyright (C) 1994, 1995, 1996 by Andreas Busse + * + * Multi-cpu abstraction and macros for easier reading: + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * + * Further modifications to make this work: + * Copyright (c) 1998-2000 Harald Koerfgen + */ +#include <asm/asm.h> +#include <asm/cachectl.h> +#include <asm/export.h> +#include <asm/fpregdef.h> +#include <asm/mipsregs.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/thread_info.h> + +#include <asm/asmmacro.h> + + .set mips1 + .align 5 + +/* + * task_struct *resume(task_struct *prev, task_struct *next, + * struct thread_info *next_ti) + */ +LEAF(resume) + mfc0 t1, CP0_STATUS + sw t1, THREAD_STATUS(a0) + cpu_save_nonscratch a0 + sw ra, THREAD_REG31(a0) + +#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) + PTR_LA t8, __stack_chk_guard + LONG_L t9, TASK_STACK_CANARY(a1) + LONG_S t9, 0(t8) +#endif + + /* + * The order of restoring the registers takes care of the race + * updating $28, $29 and kernelsp without disabling ints. + */ + move $28, a2 + cpu_restore_nonscratch a1 + + addiu t1, $28, _THREAD_SIZE - 32 + sw t1, kernelsp + + mfc0 t1, CP0_STATUS /* Do we really need this? */ + li a3, 0xff01 + and t1, a3 + lw a2, THREAD_STATUS(a1) + nor a3, $0, a3 + and a2, a3 + or a2, t1 + mtc0 a2, CP0_STATUS + move v0, a0 + jr ra + END(resume) diff --git a/arch/mips/kernel/r4k-bugs64.c b/arch/mips/kernel/r4k-bugs64.c new file mode 100644 index 000000000..1ff19f1ea --- /dev/null +++ b/arch/mips/kernel/r4k-bugs64.c @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2003, 2004, 2007 Maciej W. Rozycki + */ +#include <linux/context_tracking.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/stddef.h> + +#include <asm/bugs.h> +#include <asm/compiler.h> +#include <asm/cpu.h> +#include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/setup.h> + +static char bug64hit[] __initdata = + "reliable operation impossible!\n%s"; +static char nowar[] __initdata = + "Please report to <linux-mips@linux-mips.org>."; +static char r4kwar[] __initdata = + "Enable CPU_R4000_WORKAROUNDS to rectify."; +static char daddiwar[] __initdata = + "Enable CPU_DADDI_WORKAROUNDS to rectify."; + +static __always_inline __init +void align_mod(const int align, const int mod) +{ + asm volatile( + ".set push\n\t" + ".set noreorder\n\t" + ".balign %0\n\t" + ".rept %1\n\t" + "nop\n\t" + ".endr\n\t" + ".set pop" + : + : "n"(align), "n"(mod)); +} + +static __always_inline __init +void mult_sh_align_mod(long *v1, long *v2, long *w, + const int align, const int mod) +{ + unsigned long flags; + int m1, m2; + long p, s, lv1, lv2, lw; + + /* + * We want the multiply and the shift to be isolated from the + * rest of the code to disable gcc optimizations. Hence the + * asm statements that execute nothing, but make gcc not know + * what the values of m1, m2 and s are and what lv2 and p are + * used for. + */ + + local_irq_save(flags); + /* + * The following code leads to a wrong result of the first + * dsll32 when executed on R4000 rev. 2.2 or 3.0 (PRId + * 00000422 or 00000430, respectively). + * + * See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and + * 3.0" by MIPS Technologies, Inc., errata #16 and #28 for + * details. I got no permission to duplicate them here, + * sigh... --macro + */ + asm volatile( + "" + : "=r" (m1), "=r" (m2), "=r" (s) + : "0" (5), "1" (8), "2" (5)); + align_mod(align, mod); + /* + * The trailing nop is needed to fulfill the two-instruction + * requirement between reading hi/lo and staring a mult/div. + * Leaving it out may cause gas insert a nop itself breaking + * the desired alignment of the next chunk. + */ + asm volatile( + ".set push\n\t" + ".set noat\n\t" + ".set noreorder\n\t" + ".set nomacro\n\t" + "mult %2, %3\n\t" + "dsll32 %0, %4, %5\n\t" + "mflo $0\n\t" + "dsll32 %1, %4, %5\n\t" + "nop\n\t" + ".set pop" + : "=&r" (lv1), "=r" (lw) + : "r" (m1), "r" (m2), "r" (s), "I" (0) + : "hi", "lo", "$0"); + /* We have to use single integers for m1 and m2 and a double + * one for p to be sure the mulsidi3 gcc's RTL multiplication + * instruction has the workaround applied. Older versions of + * gcc have correct umulsi3 and mulsi3, but other + * multiplication variants lack the workaround. + */ + asm volatile( + "" + : "=r" (m1), "=r" (m2), "=r" (s) + : "0" (m1), "1" (m2), "2" (s)); + align_mod(align, mod); + p = m1 * m2; + lv2 = s << 32; + asm volatile( + "" + : "=r" (lv2) + : "0" (lv2), "r" (p)); + local_irq_restore(flags); + + *v1 = lv1; + *v2 = lv2; + *w = lw; +} + +static __always_inline __init void check_mult_sh(void) +{ + long v1[8], v2[8], w[8]; + int bug, fix, i; + + printk("Checking for the multiply/shift bug... "); + + /* + * Testing discovered false negatives for certain code offsets + * into cache lines. Hence we test all possible offsets for + * the worst assumption of an R4000 I-cache line width of 32 + * bytes. + * + * We can't use a loop as alignment directives need to be + * immediates. + */ + mult_sh_align_mod(&v1[0], &v2[0], &w[0], 32, 0); + mult_sh_align_mod(&v1[1], &v2[1], &w[1], 32, 1); + mult_sh_align_mod(&v1[2], &v2[2], &w[2], 32, 2); + mult_sh_align_mod(&v1[3], &v2[3], &w[3], 32, 3); + mult_sh_align_mod(&v1[4], &v2[4], &w[4], 32, 4); + mult_sh_align_mod(&v1[5], &v2[5], &w[5], 32, 5); + mult_sh_align_mod(&v1[6], &v2[6], &w[6], 32, 6); + mult_sh_align_mod(&v1[7], &v2[7], &w[7], 32, 7); + + bug = 0; + for (i = 0; i < 8; i++) + if (v1[i] != w[i]) + bug = 1; + + if (bug == 0) { + pr_cont("no.\n"); + return; + } + + pr_cont("yes, workaround... "); + + fix = 1; + for (i = 0; i < 8; i++) + if (v2[i] != w[i]) + fix = 0; + + if (fix == 1) { + pr_cont("yes.\n"); + return; + } + + pr_cont("no.\n"); + panic(bug64hit, !R4000_WAR ? r4kwar : nowar); +} + +static volatile int daddi_ov; + +asmlinkage void __init do_daddi_ov(struct pt_regs *regs) +{ + enum ctx_state prev_state; + + prev_state = exception_enter(); + daddi_ov = 1; + regs->cp0_epc += 4; + exception_exit(prev_state); +} + +static __init void check_daddi(void) +{ + extern asmlinkage void handle_daddi_ov(void); + unsigned long flags; + void *handler; + long v, tmp; + + printk("Checking for the daddi bug... "); + + local_irq_save(flags); + handler = set_except_vector(EXCCODE_OV, handle_daddi_ov); + /* + * The following code fails to trigger an overflow exception + * when executed on R4000 rev. 2.2 or 3.0 (PRId 00000422 or + * 00000430, respectively). + * + * See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and + * 3.0" by MIPS Technologies, Inc., erratum #23 for details. + * I got no permission to duplicate it here, sigh... --macro + */ + asm volatile( + ".set push\n\t" + ".set noat\n\t" + ".set noreorder\n\t" + ".set nomacro\n\t" + "addiu %1, $0, %2\n\t" + "dsrl %1, %1, 1\n\t" +#ifdef HAVE_AS_SET_DADDI + ".set daddi\n\t" +#endif + "daddi %0, %1, %3\n\t" + ".set pop" + : "=r" (v), "=&r" (tmp) + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); + set_except_vector(EXCCODE_OV, handler); + local_irq_restore(flags); + + if (daddi_ov) { + pr_cont("no.\n"); + return; + } + + pr_cont("yes, workaround... "); + + local_irq_save(flags); + handler = set_except_vector(EXCCODE_OV, handle_daddi_ov); + asm volatile( + "addiu %1, $0, %2\n\t" + "dsrl %1, %1, 1\n\t" + "daddi %0, %1, %3" + : "=r" (v), "=&r" (tmp) + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); + set_except_vector(EXCCODE_OV, handler); + local_irq_restore(flags); + + if (daddi_ov) { + pr_cont("yes.\n"); + return; + } + + pr_cont("no.\n"); + panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); +} + +int daddiu_bug = -1; + +static __init void check_daddiu(void) +{ + long v, w, tmp; + + printk("Checking for the daddiu bug... "); + + /* + * The following code leads to a wrong result of daddiu when + * executed on R4400 rev. 1.0 (PRId 00000440). + * + * See "MIPS R4400PC/SC Errata, Processor Revision 1.0" by + * MIPS Technologies, Inc., erratum #7 for details. + * + * According to "MIPS R4000PC/SC Errata, Processor Revision + * 2.2 and 3.0" by MIPS Technologies, Inc., erratum #41 this + * problem affects R4000 rev. 2.2 and 3.0 (PRId 00000422 and + * 00000430, respectively), too. Testing failed to trigger it + * so far. + * + * I got no permission to duplicate the errata here, sigh... + * --macro + */ + asm volatile( + ".set push\n\t" + ".set noat\n\t" + ".set noreorder\n\t" + ".set nomacro\n\t" + "addiu %2, $0, %3\n\t" + "dsrl %2, %2, 1\n\t" +#ifdef HAVE_AS_SET_DADDI + ".set daddi\n\t" +#endif + "daddiu %0, %2, %4\n\t" + "addiu %1, $0, %4\n\t" + "daddu %1, %2\n\t" + ".set pop" + : "=&r" (v), "=&r" (w), "=&r" (tmp) + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); + + daddiu_bug = v != w; + + if (!daddiu_bug) { + pr_cont("no.\n"); + return; + } + + pr_cont("yes, workaround... "); + + asm volatile( + "addiu %2, $0, %3\n\t" + "dsrl %2, %2, 1\n\t" + "daddiu %0, %2, %4\n\t" + "addiu %1, $0, %4\n\t" + "daddu %1, %2" + : "=&r" (v), "=&r" (w), "=&r" (tmp) + : "I" (0xffffffffffffdb9aUL), "I" (0x1234)); + + if (v == w) { + pr_cont("yes.\n"); + return; + } + + pr_cont("no.\n"); + panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); +} + +void __init check_bugs64_early(void) +{ + check_mult_sh(); + check_daddiu(); +} + +void __init check_bugs64(void) +{ + check_daddi(); +} diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S new file mode 100644 index 000000000..b91e91106 --- /dev/null +++ b/arch/mips/kernel/r4k_fpu.S @@ -0,0 +1,417 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 98, 99, 2000, 01 Ralf Baechle + * + * Multi-arch abstraction and asm macros for easier reading: + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. + * Copyright (C) 1999, 2001 Silicon Graphics, Inc. + */ +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/errno.h> +#include <asm/export.h> +#include <asm/fpregdef.h> +#include <asm/mipsregs.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> + +/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ +#undef fp + + .macro EX insn, reg, src + .set push + SET_HARDFLOAT + .set nomacro +.ex\@: \insn \reg, \src + .set pop + .section __ex_table,"a" + PTR .ex\@, fault + .previous + .endm + +/* + * Save a thread's fp context. + */ +LEAF(_save_fp) +EXPORT_SYMBOL(_save_fp) +#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) + mfc0 t0, CP0_STATUS +#endif + fpu_save_double a0 t0 t1 # clobbers t1 + jr ra + END(_save_fp) + +/* + * Restore a thread's fp context. + */ +LEAF(_restore_fp) +#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) + mfc0 t0, CP0_STATUS +#endif + fpu_restore_double a0 t0 t1 # clobbers t1 + jr ra + END(_restore_fp) + +#ifdef CONFIG_CPU_HAS_MSA + +/* + * Save a thread's MSA vector context. + */ +LEAF(_save_msa) +EXPORT_SYMBOL(_save_msa) + msa_save_all a0 + jr ra + END(_save_msa) + +/* + * Restore a thread's MSA vector context. + */ +LEAF(_restore_msa) + msa_restore_all a0 + jr ra + END(_restore_msa) + +LEAF(_init_msa_upper) + msa_init_all_upper + jr ra + END(_init_msa_upper) + +#endif + + .set noreorder + +/** + * _save_fp_context() - save FP context from the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Save FP context, including the 32 FP data registers and the FP + * control & status register, from the FPU to signal context. + */ +LEAF(_save_fp_context) + .set push + SET_HARDFLOAT + cfc1 t1, fcr31 + .set pop + +#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) + .set push + SET_HARDFLOAT +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) + .set mips32r2 + .set fp=64 + mfc0 t0, CP0_STATUS + sll t0, t0, 5 + bgez t0, 1f # skip storing odd if FR=0 + nop +#endif + /* Store the 16 odd double precision registers */ + EX sdc1 $f1, 8(a0) + EX sdc1 $f3, 24(a0) + EX sdc1 $f5, 40(a0) + EX sdc1 $f7, 56(a0) + EX sdc1 $f9, 72(a0) + EX sdc1 $f11, 88(a0) + EX sdc1 $f13, 104(a0) + EX sdc1 $f15, 120(a0) + EX sdc1 $f17, 136(a0) + EX sdc1 $f19, 152(a0) + EX sdc1 $f21, 168(a0) + EX sdc1 $f23, 184(a0) + EX sdc1 $f25, 200(a0) + EX sdc1 $f27, 216(a0) + EX sdc1 $f29, 232(a0) + EX sdc1 $f31, 248(a0) +1: .set pop +#endif + + .set push + SET_HARDFLOAT + /* Store the 16 even double precision registers */ + EX sdc1 $f0, 0(a0) + EX sdc1 $f2, 16(a0) + EX sdc1 $f4, 32(a0) + EX sdc1 $f6, 48(a0) + EX sdc1 $f8, 64(a0) + EX sdc1 $f10, 80(a0) + EX sdc1 $f12, 96(a0) + EX sdc1 $f14, 112(a0) + EX sdc1 $f16, 128(a0) + EX sdc1 $f18, 144(a0) + EX sdc1 $f20, 160(a0) + EX sdc1 $f22, 176(a0) + EX sdc1 $f24, 192(a0) + EX sdc1 $f26, 208(a0) + EX sdc1 $f28, 224(a0) + EX sdc1 $f30, 240(a0) + EX sw t1, 0(a1) + jr ra + li v0, 0 # success + .set pop + END(_save_fp_context) + +/** + * _restore_fp_context() - restore FP context to the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Restore FP context, including the 32 FP data registers and the FP + * control & status register, from signal context to the FPU. + */ +LEAF(_restore_fp_context) + EX lw t1, 0(a1) + +#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \ + defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6) + .set push + SET_HARDFLOAT +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) + .set mips32r2 + .set fp=64 + mfc0 t0, CP0_STATUS + sll t0, t0, 5 + bgez t0, 1f # skip loading odd if FR=0 + nop +#endif + EX ldc1 $f1, 8(a0) + EX ldc1 $f3, 24(a0) + EX ldc1 $f5, 40(a0) + EX ldc1 $f7, 56(a0) + EX ldc1 $f9, 72(a0) + EX ldc1 $f11, 88(a0) + EX ldc1 $f13, 104(a0) + EX ldc1 $f15, 120(a0) + EX ldc1 $f17, 136(a0) + EX ldc1 $f19, 152(a0) + EX ldc1 $f21, 168(a0) + EX ldc1 $f23, 184(a0) + EX ldc1 $f25, 200(a0) + EX ldc1 $f27, 216(a0) + EX ldc1 $f29, 232(a0) + EX ldc1 $f31, 248(a0) +1: .set pop +#endif + .set push + SET_HARDFLOAT + EX ldc1 $f0, 0(a0) + EX ldc1 $f2, 16(a0) + EX ldc1 $f4, 32(a0) + EX ldc1 $f6, 48(a0) + EX ldc1 $f8, 64(a0) + EX ldc1 $f10, 80(a0) + EX ldc1 $f12, 96(a0) + EX ldc1 $f14, 112(a0) + EX ldc1 $f16, 128(a0) + EX ldc1 $f18, 144(a0) + EX ldc1 $f20, 160(a0) + EX ldc1 $f22, 176(a0) + EX ldc1 $f24, 192(a0) + EX ldc1 $f26, 208(a0) + EX ldc1 $f28, 224(a0) + EX ldc1 $f30, 240(a0) + ctc1 t1, fcr31 + .set pop + jr ra + li v0, 0 # success + END(_restore_fp_context) + +#ifdef CONFIG_CPU_HAS_MSA + + .macro op_one_wr op, idx, base + .align 4 +\idx: \op \idx, 0, \base + jr ra + nop + .endm + + .macro op_msa_wr name, op +LEAF(\name) + .set push + .set noreorder + sll t0, a0, 4 + PTR_LA t1, 0f + PTR_ADDU t0, t0, t1 + jr t0 + nop + op_one_wr \op, 0, a1 + op_one_wr \op, 1, a1 + op_one_wr \op, 2, a1 + op_one_wr \op, 3, a1 + op_one_wr \op, 4, a1 + op_one_wr \op, 5, a1 + op_one_wr \op, 6, a1 + op_one_wr \op, 7, a1 + op_one_wr \op, 8, a1 + op_one_wr \op, 9, a1 + op_one_wr \op, 10, a1 + op_one_wr \op, 11, a1 + op_one_wr \op, 12, a1 + op_one_wr \op, 13, a1 + op_one_wr \op, 14, a1 + op_one_wr \op, 15, a1 + op_one_wr \op, 16, a1 + op_one_wr \op, 17, a1 + op_one_wr \op, 18, a1 + op_one_wr \op, 19, a1 + op_one_wr \op, 20, a1 + op_one_wr \op, 21, a1 + op_one_wr \op, 22, a1 + op_one_wr \op, 23, a1 + op_one_wr \op, 24, a1 + op_one_wr \op, 25, a1 + op_one_wr \op, 26, a1 + op_one_wr \op, 27, a1 + op_one_wr \op, 28, a1 + op_one_wr \op, 29, a1 + op_one_wr \op, 30, a1 + op_one_wr \op, 31, a1 + .set pop + END(\name) + .endm + + op_msa_wr read_msa_wr_b, st_b + op_msa_wr read_msa_wr_h, st_h + op_msa_wr read_msa_wr_w, st_w + op_msa_wr read_msa_wr_d, st_d + + op_msa_wr write_msa_wr_b, ld_b + op_msa_wr write_msa_wr_h, ld_h + op_msa_wr write_msa_wr_w, ld_w + op_msa_wr write_msa_wr_d, ld_d + +#endif /* CONFIG_CPU_HAS_MSA */ + +#ifdef CONFIG_CPU_HAS_MSA + + .macro save_msa_upper wr, off, base + .set push + .set noat +#ifdef CONFIG_64BIT + copy_s_d \wr, 1 + EX sd $1, \off(\base) +#elif defined(CONFIG_CPU_LITTLE_ENDIAN) + copy_s_w \wr, 2 + EX sw $1, \off(\base) + copy_s_w \wr, 3 + EX sw $1, (\off+4)(\base) +#else /* CONFIG_CPU_BIG_ENDIAN */ + copy_s_w \wr, 2 + EX sw $1, (\off+4)(\base) + copy_s_w \wr, 3 + EX sw $1, \off(\base) +#endif + .set pop + .endm + +LEAF(_save_msa_all_upper) + save_msa_upper 0, 0x00, a0 + save_msa_upper 1, 0x08, a0 + save_msa_upper 2, 0x10, a0 + save_msa_upper 3, 0x18, a0 + save_msa_upper 4, 0x20, a0 + save_msa_upper 5, 0x28, a0 + save_msa_upper 6, 0x30, a0 + save_msa_upper 7, 0x38, a0 + save_msa_upper 8, 0x40, a0 + save_msa_upper 9, 0x48, a0 + save_msa_upper 10, 0x50, a0 + save_msa_upper 11, 0x58, a0 + save_msa_upper 12, 0x60, a0 + save_msa_upper 13, 0x68, a0 + save_msa_upper 14, 0x70, a0 + save_msa_upper 15, 0x78, a0 + save_msa_upper 16, 0x80, a0 + save_msa_upper 17, 0x88, a0 + save_msa_upper 18, 0x90, a0 + save_msa_upper 19, 0x98, a0 + save_msa_upper 20, 0xa0, a0 + save_msa_upper 21, 0xa8, a0 + save_msa_upper 22, 0xb0, a0 + save_msa_upper 23, 0xb8, a0 + save_msa_upper 24, 0xc0, a0 + save_msa_upper 25, 0xc8, a0 + save_msa_upper 26, 0xd0, a0 + save_msa_upper 27, 0xd8, a0 + save_msa_upper 28, 0xe0, a0 + save_msa_upper 29, 0xe8, a0 + save_msa_upper 30, 0xf0, a0 + save_msa_upper 31, 0xf8, a0 + jr ra + li v0, 0 + END(_save_msa_all_upper) + + .macro restore_msa_upper wr, off, base + .set push + .set noat +#ifdef CONFIG_64BIT + EX ld $1, \off(\base) + insert_d \wr, 1 +#elif defined(CONFIG_CPU_LITTLE_ENDIAN) + EX lw $1, \off(\base) + insert_w \wr, 2 + EX lw $1, (\off+4)(\base) + insert_w \wr, 3 +#else /* CONFIG_CPU_BIG_ENDIAN */ + EX lw $1, (\off+4)(\base) + insert_w \wr, 2 + EX lw $1, \off(\base) + insert_w \wr, 3 +#endif + .set pop + .endm + +LEAF(_restore_msa_all_upper) + restore_msa_upper 0, 0x00, a0 + restore_msa_upper 1, 0x08, a0 + restore_msa_upper 2, 0x10, a0 + restore_msa_upper 3, 0x18, a0 + restore_msa_upper 4, 0x20, a0 + restore_msa_upper 5, 0x28, a0 + restore_msa_upper 6, 0x30, a0 + restore_msa_upper 7, 0x38, a0 + restore_msa_upper 8, 0x40, a0 + restore_msa_upper 9, 0x48, a0 + restore_msa_upper 10, 0x50, a0 + restore_msa_upper 11, 0x58, a0 + restore_msa_upper 12, 0x60, a0 + restore_msa_upper 13, 0x68, a0 + restore_msa_upper 14, 0x70, a0 + restore_msa_upper 15, 0x78, a0 + restore_msa_upper 16, 0x80, a0 + restore_msa_upper 17, 0x88, a0 + restore_msa_upper 18, 0x90, a0 + restore_msa_upper 19, 0x98, a0 + restore_msa_upper 20, 0xa0, a0 + restore_msa_upper 21, 0xa8, a0 + restore_msa_upper 22, 0xb0, a0 + restore_msa_upper 23, 0xb8, a0 + restore_msa_upper 24, 0xc0, a0 + restore_msa_upper 25, 0xc8, a0 + restore_msa_upper 26, 0xd0, a0 + restore_msa_upper 27, 0xd8, a0 + restore_msa_upper 28, 0xe0, a0 + restore_msa_upper 29, 0xe8, a0 + restore_msa_upper 30, 0xf0, a0 + restore_msa_upper 31, 0xf8, a0 + jr ra + li v0, 0 + END(_restore_msa_all_upper) + +#endif /* CONFIG_CPU_HAS_MSA */ + + .set reorder + + .type fault, @function + .ent fault +fault: li v0, -EFAULT # failure + jr ra + .end fault diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S new file mode 100644 index 000000000..58232ae6c --- /dev/null +++ b/arch/mips/kernel/r4k_switch.S @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + * Copyright (C) 1994, 1995, 1996, by Andreas Busse + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2000 MIPS Technologies, Inc. + * written by Carsten Langgaard, carstenl@mips.com + */ +#include <asm/asm.h> +#include <asm/cachectl.h> +#include <asm/mipsregs.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/thread_info.h> + +#include <asm/asmmacro.h> + +/* + * task_struct *resume(task_struct *prev, task_struct *next, + * struct thread_info *next_ti) + */ + .align 5 + LEAF(resume) + mfc0 t1, CP0_STATUS + LONG_S t1, THREAD_STATUS(a0) + cpu_save_nonscratch a0 + LONG_S ra, THREAD_REG31(a0) + +#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) + PTR_LA t8, __stack_chk_guard + LONG_L t9, TASK_STACK_CANARY(a1) + LONG_S t9, 0(t8) +#endif + + /* + * The order of restoring the registers takes care of the race + * updating $28, $29 and kernelsp without disabling ints. + */ + move $28, a2 + cpu_restore_nonscratch a1 + + PTR_ADDU t0, $28, _THREAD_SIZE - 32 + set_saved_sp t0, t1, t2 + mfc0 t1, CP0_STATUS /* Do we really need this? */ + li a3, 0xff01 + and t1, a3 + LONG_L a2, THREAD_STATUS(a1) + nor a3, $0, a3 + and a2, a3 + or a2, t1 + mtc0 a2, CP0_STATUS + move v0, a0 + jr ra + END(resume) diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c new file mode 100644 index 000000000..dab8febb5 --- /dev/null +++ b/arch/mips/kernel/relocate.c @@ -0,0 +1,446 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Support for Kernel relocation at boot time + * + * Copyright (C) 2015, Imagination Technologies Ltd. + * Authors: Matt Redfearn (matt.redfearn@mips.com) + */ +#include <asm/bootinfo.h> +#include <asm/cacheflush.h> +#include <asm/fw/fw.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/timex.h> +#include <linux/elf.h> +#include <linux/kernel.h> +#include <linux/libfdt.h> +#include <linux/of_fdt.h> +#include <linux/sched/task.h> +#include <linux/start_kernel.h> +#include <linux/string.h> +#include <linux/printk.h> + +#define RELOCATED(x) ((void *)((long)x + offset)) + +extern u32 _relocation_start[]; /* End kernel image / start relocation table */ +extern u32 _relocation_end[]; /* End relocation table */ + +extern long __start___ex_table; /* Start exception table */ +extern long __stop___ex_table; /* End exception table */ + +extern void __weak plat_fdt_relocated(void *new_location); + +/* + * This function may be defined for a platform to perform any post-relocation + * fixup necessary. + * Return non-zero to abort relocation + */ +int __weak plat_post_relocation(long offset) +{ + return 0; +} + +static inline u32 __init get_synci_step(void) +{ + u32 res; + + __asm__("rdhwr %0, $1" : "=r" (res)); + + return res; +} + +static void __init sync_icache(void *kbase, unsigned long kernel_length) +{ + void *kend = kbase + kernel_length; + u32 step = get_synci_step(); + + do { + __asm__ __volatile__( + "synci 0(%0)" + : /* no output */ + : "r" (kbase)); + + kbase += step; + } while (kbase < kend); + + /* Completion barrier */ + __sync(); +} + +static int __init apply_r_mips_64_rel(u32 *loc_orig, u32 *loc_new, long offset) +{ + *(u64 *)loc_new += offset; + + return 0; +} + +static int __init apply_r_mips_32_rel(u32 *loc_orig, u32 *loc_new, long offset) +{ + *loc_new += offset; + + return 0; +} + +static int __init apply_r_mips_26_rel(u32 *loc_orig, u32 *loc_new, long offset) +{ + unsigned long target_addr = (*loc_orig) & 0x03ffffff; + + if (offset % 4) { + pr_err("Dangerous R_MIPS_26 REL relocation\n"); + return -ENOEXEC; + } + + /* Original target address */ + target_addr <<= 2; + target_addr += (unsigned long)loc_orig & ~0x03ffffff; + + /* Get the new target address */ + target_addr += offset; + + if ((target_addr & 0xf0000000) != ((unsigned long)loc_new & 0xf0000000)) { + pr_err("R_MIPS_26 REL relocation overflow\n"); + return -ENOEXEC; + } + + target_addr -= (unsigned long)loc_new & ~0x03ffffff; + target_addr >>= 2; + + *loc_new = (*loc_new & ~0x03ffffff) | (target_addr & 0x03ffffff); + + return 0; +} + + +static int __init apply_r_mips_hi16_rel(u32 *loc_orig, u32 *loc_new, long offset) +{ + unsigned long insn = *loc_orig; + unsigned long target = (insn & 0xffff) << 16; /* high 16bits of target */ + + target += offset; + + *loc_new = (insn & ~0xffff) | ((target >> 16) & 0xffff); + return 0; +} + +static int (*reloc_handlers_rel[]) (u32 *, u32 *, long) __initdata = { + [R_MIPS_64] = apply_r_mips_64_rel, + [R_MIPS_32] = apply_r_mips_32_rel, + [R_MIPS_26] = apply_r_mips_26_rel, + [R_MIPS_HI16] = apply_r_mips_hi16_rel, +}; + +int __init do_relocations(void *kbase_old, void *kbase_new, long offset) +{ + u32 *r; + u32 *loc_orig; + u32 *loc_new; + int type; + int res; + + for (r = _relocation_start; r < _relocation_end; r++) { + /* Sentinel for last relocation */ + if (*r == 0) + break; + + type = (*r >> 24) & 0xff; + loc_orig = kbase_old + ((*r & 0x00ffffff) << 2); + loc_new = RELOCATED(loc_orig); + + if (reloc_handlers_rel[type] == NULL) { + /* Unsupported relocation */ + pr_err("Unhandled relocation type %d at 0x%pK\n", + type, loc_orig); + return -ENOEXEC; + } + + res = reloc_handlers_rel[type](loc_orig, loc_new, offset); + if (res) + return res; + } + + return 0; +} + +/* + * The exception table is filled in by the relocs tool after vmlinux is linked. + * It must be relocated separately since there will not be any relocation + * information for it filled in by the linker. + */ +static int __init relocate_exception_table(long offset) +{ + unsigned long *etable_start, *etable_end, *e; + + etable_start = RELOCATED(&__start___ex_table); + etable_end = RELOCATED(&__stop___ex_table); + + for (e = etable_start; e < etable_end; e++) + *e += offset; + + return 0; +} + +#ifdef CONFIG_RANDOMIZE_BASE + +static inline __init unsigned long rotate_xor(unsigned long hash, + const void *area, size_t size) +{ + const typeof(hash) *ptr = PTR_ALIGN(area, sizeof(hash)); + size_t diff, i; + + diff = (void *)ptr - area; + if (unlikely(size < diff + sizeof(hash))) + return hash; + + size = ALIGN_DOWN(size - diff, sizeof(hash)); + + for (i = 0; i < size / sizeof(hash); i++) { + /* Rotate by odd number of bits and XOR. */ + hash = (hash << ((sizeof(hash) * 8) - 7)) | (hash >> 7); + hash ^= ptr[i]; + } + + return hash; +} + +static inline __init unsigned long get_random_boot(void) +{ + unsigned long entropy = random_get_entropy(); + unsigned long hash = 0; + + /* Attempt to create a simple but unpredictable starting entropy. */ + hash = rotate_xor(hash, linux_banner, strlen(linux_banner)); + + /* Add in any runtime entropy we can get */ + hash = rotate_xor(hash, &entropy, sizeof(entropy)); + +#if defined(CONFIG_USE_OF) + /* Get any additional entropy passed in device tree */ + if (initial_boot_params) { + int node, len; + u64 *prop; + + node = fdt_path_offset(initial_boot_params, "/chosen"); + if (node >= 0) { + prop = fdt_getprop_w(initial_boot_params, node, + "kaslr-seed", &len); + if (prop && (len == sizeof(u64))) + hash = rotate_xor(hash, prop, sizeof(*prop)); + } + } +#endif /* CONFIG_USE_OF */ + + return hash; +} + +static inline __init bool kaslr_disabled(void) +{ + char *str; + +#if defined(CONFIG_CMDLINE_BOOL) + const char *builtin_cmdline = CONFIG_CMDLINE; + + str = strstr(builtin_cmdline, "nokaslr"); + if (str == builtin_cmdline || + (str > builtin_cmdline && *(str - 1) == ' ')) + return true; +#endif + str = strstr(arcs_cmdline, "nokaslr"); + if (str == arcs_cmdline || (str > arcs_cmdline && *(str - 1) == ' ')) + return true; + + return false; +} + +static inline void __init *determine_relocation_address(void) +{ + /* Choose a new address for the kernel */ + unsigned long kernel_length; + void *dest = &_text; + unsigned long offset; + + if (kaslr_disabled()) + return dest; + + kernel_length = (long)_end - (long)(&_text); + + offset = get_random_boot() << 16; + offset &= (CONFIG_RANDOMIZE_BASE_MAX_OFFSET - 1); + if (offset < kernel_length) + offset += ALIGN(kernel_length, 0xffff); + + return RELOCATED(dest); +} + +#else + +static inline void __init *determine_relocation_address(void) +{ + /* + * Choose a new address for the kernel + * For now we'll hard code the destination + */ + return (void *)0xffffffff81000000; +} + +#endif + +static inline int __init relocation_addr_valid(void *loc_new) +{ + if ((unsigned long)loc_new & 0x0000ffff) { + /* Inappropriately aligned new location */ + return 0; + } + if ((unsigned long)loc_new < (unsigned long)&_end) { + /* New location overlaps original kernel */ + return 0; + } + return 1; +} + +void *__init relocate_kernel(void) +{ + void *loc_new; + unsigned long kernel_length; + unsigned long bss_length; + long offset = 0; + int res = 1; + /* Default to original kernel entry point */ + void *kernel_entry = start_kernel; + void *fdt = NULL; + + /* Get the command line */ + fw_init_cmdline(); +#if defined(CONFIG_USE_OF) + /* Deal with the device tree */ + fdt = plat_get_fdt(); + early_init_dt_scan(fdt); + if (boot_command_line[0]) { + /* Boot command line was passed in device tree */ + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); + } +#endif /* CONFIG_USE_OF */ + + kernel_length = (long)(&_relocation_start) - (long)(&_text); + bss_length = (long)&__bss_stop - (long)&__bss_start; + + loc_new = determine_relocation_address(); + + /* Sanity check relocation address */ + if (relocation_addr_valid(loc_new)) + offset = (unsigned long)loc_new - (unsigned long)(&_text); + + /* Reset the command line now so we don't end up with a duplicate */ + arcs_cmdline[0] = '\0'; + + if (offset) { + void (*fdt_relocated_)(void *) = NULL; +#if defined(CONFIG_USE_OF) + unsigned long fdt_phys = virt_to_phys(fdt); + + /* + * If built-in dtb is used then it will have been relocated + * during kernel _text relocation. If appended DTB is used + * then it will not be relocated, but it should remain + * intact in the original location. If dtb is loaded by + * the bootloader then it may need to be moved if it crosses + * the target memory area + */ + + if (fdt_phys >= virt_to_phys(RELOCATED(&_text)) && + fdt_phys <= virt_to_phys(RELOCATED(&_end))) { + void *fdt_relocated = + RELOCATED(ALIGN((long)&_end, PAGE_SIZE)); + memcpy(fdt_relocated, fdt, fdt_totalsize(fdt)); + fdt = fdt_relocated; + fdt_relocated_ = RELOCATED(&plat_fdt_relocated); + } +#endif /* CONFIG_USE_OF */ + + /* Copy the kernel to it's new location */ + memcpy(loc_new, &_text, kernel_length); + + /* Perform relocations on the new kernel */ + res = do_relocations(&_text, loc_new, offset); + if (res < 0) + goto out; + + /* Sync the caches ready for execution of new kernel */ + sync_icache(loc_new, kernel_length); + + res = relocate_exception_table(offset); + if (res < 0) + goto out; + + /* + * The original .bss has already been cleared, and + * some variables such as command line parameters + * stored to it so make a copy in the new location. + */ + memcpy(RELOCATED(&__bss_start), &__bss_start, bss_length); + + /* + * If fdt was stored outside of the kernel image and + * had to be moved then update platform's state data + * with the new fdt location + */ + if (fdt_relocated_) + fdt_relocated_(fdt); + + /* + * Last chance for the platform to abort relocation. + * This may also be used by the platform to perform any + * initialisation required now that the new kernel is + * resident in memory and ready to be executed. + */ + if (plat_post_relocation(offset)) + goto out; + + /* The current thread is now within the relocated image */ + __current_thread_info = RELOCATED(&init_thread_union); + + /* Return the new kernel's entry point */ + kernel_entry = RELOCATED(start_kernel); + } +out: + return kernel_entry; +} + +/* + * Show relocation information on panic. + */ +void show_kernel_relocation(const char *level) +{ + unsigned long offset; + + offset = __pa_symbol(_text) - __pa_symbol(VMLINUX_LOAD_ADDRESS); + + if (IS_ENABLED(CONFIG_RELOCATABLE) && offset > 0) { + printk(level); + pr_cont("Kernel relocated by 0x%pK\n", (void *)offset); + pr_cont(" .text @ 0x%pK\n", _text); + pr_cont(" .data @ 0x%pK\n", _sdata); + pr_cont(" .bss @ 0x%pK\n", __bss_start); + } +} + +static int kernel_location_notifier_fn(struct notifier_block *self, + unsigned long v, void *p) +{ + show_kernel_relocation(KERN_EMERG); + return NOTIFY_DONE; +} + +static struct notifier_block kernel_location_notifier = { + .notifier_call = kernel_location_notifier_fn +}; + +static int __init register_kernel_offset_dumper(void) +{ + atomic_notifier_chain_register(&panic_notifier_list, + &kernel_location_notifier); + return 0; +} +__initcall(register_kernel_offset_dumper); diff --git a/arch/mips/kernel/relocate_kernel.S b/arch/mips/kernel/relocate_kernel.S new file mode 100644 index 000000000..ac870893b --- /dev/null +++ b/arch/mips/kernel/relocate_kernel.S @@ -0,0 +1,190 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * relocate_kernel.S for kexec + * Created by <nschichan@corp.free.fr> on Thu Oct 12 17:49:57 2006 + */ + +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/stackframe.h> +#include <asm/addrspace.h> + +LEAF(relocate_new_kernel) + PTR_L a0, arg0 + PTR_L a1, arg1 + PTR_L a2, arg2 + PTR_L a3, arg3 + + PTR_L s0, kexec_indirection_page + PTR_L s1, kexec_start_address + +process_entry: + PTR_L s2, (s0) + PTR_ADDIU s0, s0, SZREG + + /* + * In case of a kdump/crash kernel, the indirection page is not + * populated as the kernel is directly copied to a reserved location + */ + beqz s2, done + + /* destination page */ + and s3, s2, 0x1 + beq s3, zero, 1f + and s4, s2, ~0x1 /* store destination addr in s4 */ + b process_entry + +1: + /* indirection page, update s0 */ + and s3, s2, 0x2 + beq s3, zero, 1f + and s0, s2, ~0x2 + b process_entry + +1: + /* done page */ + and s3, s2, 0x4 + beq s3, zero, 1f + b done +1: + /* source page */ + and s3, s2, 0x8 + beq s3, zero, process_entry + and s2, s2, ~0x8 + li s6, (1 << _PAGE_SHIFT) / SZREG + +copy_word: + /* copy page word by word */ + REG_L s5, (s2) + REG_S s5, (s4) + PTR_ADDIU s4, s4, SZREG + PTR_ADDIU s2, s2, SZREG + LONG_ADDIU s6, s6, -1 + beq s6, zero, process_entry + b copy_word + b process_entry + +done: +#ifdef CONFIG_SMP + /* kexec_flag reset is signal to other CPUs what kernel + was moved to it's location. Note - we need relocated address + of kexec_flag. */ + + bal 1f + 1: move t1,ra; + PTR_LA t2,1b + PTR_LA t0,kexec_flag + PTR_SUB t0,t0,t2; + PTR_ADD t0,t1,t0; + LONG_S zero,(t0) +#endif + +#ifdef CONFIG_CPU_CAVIUM_OCTEON + /* We need to flush I-cache before jumping to new kernel. + * Unfortunately, this code is cpu-specific. + */ + .set push + .set noreorder + syncw + syncw + synci 0($0) + .set pop +#else + sync +#endif + /* jump to kexec_start_address */ + j s1 + END(relocate_new_kernel) + +#ifdef CONFIG_SMP +/* + * Other CPUs should wait until code is relocated and + * then start at entry (?) point. + */ +LEAF(kexec_smp_wait) + PTR_L a0, s_arg0 + PTR_L a1, s_arg1 + PTR_L a2, s_arg2 + PTR_L a3, s_arg3 + PTR_L s1, kexec_start_address + + /* Non-relocated address works for args and kexec_start_address ( old + * kernel is not overwritten). But we need relocated address of + * kexec_flag. + */ + + bal 1f +1: move t1,ra; + PTR_LA t2,1b + PTR_LA t0,kexec_flag + PTR_SUB t0,t0,t2; + PTR_ADD t0,t1,t0; + +1: LONG_L s0, (t0) + bne s0, zero,1b + +#ifdef CONFIG_CPU_CAVIUM_OCTEON + .set push + .set noreorder + synci 0($0) + .set pop +#else + sync +#endif + j s1 + END(kexec_smp_wait) +#endif + +#ifdef __mips64 + /* all PTR's must be aligned to 8 byte in 64-bit mode */ + .align 3 +#endif + +/* All parameters to new kernel are passed in registers a0-a3. + * kexec_args[0..3] are used to prepare register values. + */ + +kexec_args: + EXPORT(kexec_args) +arg0: PTR 0x0 +arg1: PTR 0x0 +arg2: PTR 0x0 +arg3: PTR 0x0 + .size kexec_args,PTRSIZE*4 + +#ifdef CONFIG_SMP +/* + * Secondary CPUs may have different kernel parameters in + * their registers a0-a3. secondary_kexec_args[0..3] are used + * to prepare register values. + */ +secondary_kexec_args: + EXPORT(secondary_kexec_args) +s_arg0: PTR 0x0 +s_arg1: PTR 0x0 +s_arg2: PTR 0x0 +s_arg3: PTR 0x0 + .size secondary_kexec_args,PTRSIZE*4 +kexec_flag: + LONG 0x1 + +#endif + +kexec_start_address: + EXPORT(kexec_start_address) + PTR 0x0 + .size kexec_start_address, PTRSIZE + +kexec_indirection_page: + EXPORT(kexec_indirection_page) + PTR 0 + .size kexec_indirection_page, PTRSIZE + +relocate_new_kernel_end: + +relocate_new_kernel_size: + EXPORT(relocate_new_kernel_size) + PTR relocate_new_kernel_end - relocate_new_kernel + .size relocate_new_kernel_size, PTRSIZE diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c new file mode 100644 index 000000000..6288780b7 --- /dev/null +++ b/arch/mips/kernel/reset.c @@ -0,0 +1,125 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001, 06 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/pm.h> +#include <linux/types.h> +#include <linux/reboot.h> +#include <linux/delay.h> + +#include <asm/compiler.h> +#include <asm/idle.h> +#include <asm/mipsregs.h> +#include <asm/reboot.h> + +/* + * Urgs ... Too many MIPS machines to handle this in a generic way. + * So handle all using function pointers to machine specific + * functions. + */ +void (*_machine_restart)(char *command); +void (*_machine_halt)(void); +void (*pm_power_off)(void); + +EXPORT_SYMBOL(pm_power_off); + +static void machine_hang(void) +{ + /* + * We're hanging the system so we don't want to be interrupted anymore. + * Any interrupt handlers that ran would at best be useless & at worst + * go awry because the system isn't in a functional state. + */ + local_irq_disable(); + + /* + * Mask all interrupts, giving us a better chance of remaining in the + * low power wait state. + */ + clear_c0_status(ST0_IM); + + while (true) { + if (cpu_has_mips_r) { + /* + * We know that the wait instruction is supported so + * make use of it directly, leaving interrupts + * disabled. + */ + asm volatile( + ".set push\n\t" + ".set " MIPS_ISA_ARCH_LEVEL "\n\t" + "wait\n\t" + ".set pop"); + } else if (cpu_wait) { + /* + * Try the cpu_wait() callback. This isn't ideal since + * it'll re-enable interrupts, but that ought to be + * harmless given that they're all masked. + */ + cpu_wait(); + local_irq_disable(); + } else { + /* + * We're going to burn some power running round the + * loop, but we don't really have a choice. This isn't + * a path we should expect to run for long during + * typical use anyway. + */ + } + + /* + * In most modern MIPS CPUs interrupts will cause the wait + * instruction to graduate even when disabled, and in some + * cases even when masked. In order to prevent a timer + * interrupt from continuously taking us out of the low power + * wait state, we clear any pending timer interrupt here. + */ + if (cpu_has_counter) + write_c0_compare(0); + } +} + +void machine_restart(char *command) +{ + if (_machine_restart) + _machine_restart(command); + +#ifdef CONFIG_SMP + preempt_disable(); + smp_send_stop(); +#endif + do_kernel_restart(command); + mdelay(1000); + pr_emerg("Reboot failed -- System halted\n"); + machine_hang(); +} + +void machine_halt(void) +{ + if (_machine_halt) + _machine_halt(); + +#ifdef CONFIG_SMP + preempt_disable(); + smp_send_stop(); +#endif + machine_hang(); +} + +void machine_power_off(void) +{ + if (pm_power_off) + pm_power_off(); + +#ifdef CONFIG_SMP + preempt_disable(); + smp_send_stop(); +#endif + machine_hang(); +} diff --git a/arch/mips/kernel/rtlx-cmp.c b/arch/mips/kernel/rtlx-cmp.c new file mode 100644 index 000000000..d26dcc4b4 --- /dev/null +++ b/arch/mips/kernel/rtlx-cmp.c @@ -0,0 +1,122 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/err.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include <linux/smp.h> + +#include <asm/mips_mt.h> +#include <asm/vpe.h> +#include <asm/rtlx.h> + +static int major; + +static void rtlx_interrupt(void) +{ + int i; + struct rtlx_info *info; + struct rtlx_info **p = vpe_get_shared(aprp_cpu_index()); + + if (p == NULL || *p == NULL) + return; + + info = *p; + + if (info->ap_int_pending == 1 && smp_processor_id() == 0) { + for (i = 0; i < RTLX_CHANNELS; i++) { + wake_up(&channel_wqs[i].lx_queue); + wake_up(&channel_wqs[i].rt_queue); + } + info->ap_int_pending = 0; + } +} + +void _interrupt_sp(void) +{ + smp_send_reschedule(aprp_cpu_index()); +} + +int __init rtlx_module_init(void) +{ + struct device *dev; + int i, err; + + if (!cpu_has_mipsmt) { + pr_warn("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if (num_possible_cpus() - aprp_cpu_index() < 1) { + pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n" + "Pass maxcpus=<n> argument as kernel argument\n"); + + return -ENODEV; + } + + major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops); + if (major < 0) { + pr_err("rtlx_module_init: unable to register device\n"); + return major; + } + + /* initialise the wait queues */ + for (i = 0; i < RTLX_CHANNELS; i++) { + init_waitqueue_head(&channel_wqs[i].rt_queue); + init_waitqueue_head(&channel_wqs[i].lx_queue); + atomic_set(&channel_wqs[i].in_open, 0); + mutex_init(&channel_wqs[i].mutex); + + dev = device_create(mt_class, NULL, MKDEV(major, i), NULL, + "%s%d", RTLX_MODULE_NAME, i); + if (IS_ERR(dev)) { + while (i--) + device_destroy(mt_class, MKDEV(major, i)); + + err = PTR_ERR(dev); + goto out_chrdev; + } + } + + /* set up notifiers */ + rtlx_notify.start = rtlx_starting; + rtlx_notify.stop = rtlx_stopping; + vpe_notify(aprp_cpu_index(), &rtlx_notify); + + if (cpu_has_vint) { + aprp_hook = rtlx_interrupt; + } else { + pr_err("APRP RTLX init on non-vectored-interrupt processor\n"); + err = -ENODEV; + goto out_class; + } + + return 0; + +out_class: + for (i = 0; i < RTLX_CHANNELS; i++) + device_destroy(mt_class, MKDEV(major, i)); +out_chrdev: + unregister_chrdev(major, RTLX_MODULE_NAME); + + return err; +} + +void __exit rtlx_module_exit(void) +{ + int i; + + for (i = 0; i < RTLX_CHANNELS; i++) + device_destroy(mt_class, MKDEV(major, i)); + + unregister_chrdev(major, RTLX_MODULE_NAME); + + aprp_hook = NULL; +} diff --git a/arch/mips/kernel/rtlx-mt.c b/arch/mips/kernel/rtlx-mt.c new file mode 100644 index 000000000..38c6925a1 --- /dev/null +++ b/arch/mips/kernel/rtlx-mt.c @@ -0,0 +1,147 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/err.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/mips_mt.h> +#include <asm/vpe.h> +#include <asm/rtlx.h> + +static int major; + +static void rtlx_dispatch(void) +{ + if (read_c0_cause() & read_c0_status() & C_SW0) + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ); +} + +/* + * Interrupt handler may be called before rtlx_init has otherwise had + * a chance to run. + */ +static irqreturn_t rtlx_interrupt(int irq, void *dev_id) +{ + unsigned int vpeflags; + unsigned long flags; + int i; + + local_irq_save(flags); + vpeflags = dvpe(); + set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ); + irq_enable_hazard(); + evpe(vpeflags); + local_irq_restore(flags); + + for (i = 0; i < RTLX_CHANNELS; i++) { + wake_up(&channel_wqs[i].lx_queue); + wake_up(&channel_wqs[i].rt_queue); + } + + return IRQ_HANDLED; +} + +static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ; + +void _interrupt_sp(void) +{ + unsigned long flags; + + local_irq_save(flags); + dvpe(); + settc(1); + write_vpe_c0_cause(read_vpe_c0_cause() | C_SW0); + evpe(EVPE_ENABLE); + local_irq_restore(flags); +} + +int __init rtlx_module_init(void) +{ + struct device *dev; + int i, err; + + if (!cpu_has_mipsmt) { + pr_warn("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if (aprp_cpu_index() == 0) { + pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n" + "Pass maxtcs=<n> argument as kernel argument\n"); + + return -ENODEV; + } + + major = register_chrdev(0, RTLX_MODULE_NAME, &rtlx_fops); + if (major < 0) { + pr_err("rtlx_module_init: unable to register device\n"); + return major; + } + + /* initialise the wait queues */ + for (i = 0; i < RTLX_CHANNELS; i++) { + init_waitqueue_head(&channel_wqs[i].rt_queue); + init_waitqueue_head(&channel_wqs[i].lx_queue); + atomic_set(&channel_wqs[i].in_open, 0); + mutex_init(&channel_wqs[i].mutex); + + dev = device_create(mt_class, NULL, MKDEV(major, i), NULL, + "%s%d", RTLX_MODULE_NAME, i); + if (IS_ERR(dev)) { + while (i--) + device_destroy(mt_class, MKDEV(major, i)); + + err = PTR_ERR(dev); + goto out_chrdev; + } + } + + /* set up notifiers */ + rtlx_notify.start = rtlx_starting; + rtlx_notify.stop = rtlx_stopping; + vpe_notify(aprp_cpu_index(), &rtlx_notify); + + if (cpu_has_vint) { + aprp_hook = rtlx_dispatch; + } else { + pr_err("APRP RTLX init on non-vectored-interrupt processor\n"); + err = -ENODEV; + goto out_class; + } + + err = request_irq(rtlx_irq_num, rtlx_interrupt, 0, "RTLX", rtlx); + if (err) + goto out_class; + + return 0; + +out_class: + for (i = 0; i < RTLX_CHANNELS; i++) + device_destroy(mt_class, MKDEV(major, i)); +out_chrdev: + unregister_chrdev(major, RTLX_MODULE_NAME); + + return err; +} + +void __exit rtlx_module_exit(void) +{ + int i; + + for (i = 0; i < RTLX_CHANNELS; i++) + device_destroy(mt_class, MKDEV(major, i)); + + unregister_chrdev(major, RTLX_MODULE_NAME); + + aprp_hook = NULL; +} diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c new file mode 100644 index 000000000..18c509c59 --- /dev/null +++ b/arch/mips/kernel/rtlx.c @@ -0,0 +1,409 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2005, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/syscalls.h> +#include <linux/moduleloader.h> +#include <linux/atomic.h> +#include <linux/sched/signal.h> + +#include <asm/mipsmtregs.h> +#include <asm/mips_mt.h> +#include <asm/processor.h> +#include <asm/rtlx.h> +#include <asm/setup.h> +#include <asm/vpe.h> + +static int sp_stopping; +struct rtlx_info *rtlx; +struct chan_waitqueues channel_wqs[RTLX_CHANNELS]; +struct vpe_notifications rtlx_notify; +void (*aprp_hook)(void) = NULL; +EXPORT_SYMBOL(aprp_hook); + +static void __used dump_rtlx(void) +{ + int i; + + pr_info("id 0x%lx state %d\n", rtlx->id, rtlx->state); + + for (i = 0; i < RTLX_CHANNELS; i++) { + struct rtlx_channel *chan = &rtlx->channel[i]; + + pr_info(" rt_state %d lx_state %d buffer_size %d\n", + chan->rt_state, chan->lx_state, chan->buffer_size); + + pr_info(" rt_read %d rt_write %d\n", + chan->rt_read, chan->rt_write); + + pr_info(" lx_read %d lx_write %d\n", + chan->lx_read, chan->lx_write); + + pr_info(" rt_buffer <%s>\n", chan->rt_buffer); + pr_info(" lx_buffer <%s>\n", chan->lx_buffer); + } +} + +/* call when we have the address of the shared structure from the SP side. */ +static int rtlx_init(struct rtlx_info *rtlxi) +{ + if (rtlxi->id != RTLX_ID) { + pr_err("no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id); + return -ENOEXEC; + } + + rtlx = rtlxi; + + return 0; +} + +/* notifications */ +void rtlx_starting(int vpe) +{ + int i; + sp_stopping = 0; + + /* force a reload of rtlx */ + rtlx = NULL; + + /* wake up any sleeping rtlx_open's */ + for (i = 0; i < RTLX_CHANNELS; i++) + wake_up_interruptible(&channel_wqs[i].lx_queue); +} + +void rtlx_stopping(int vpe) +{ + int i; + + sp_stopping = 1; + for (i = 0; i < RTLX_CHANNELS; i++) + wake_up_interruptible(&channel_wqs[i].lx_queue); +} + + +int rtlx_open(int index, int can_sleep) +{ + struct rtlx_info **p; + struct rtlx_channel *chan; + enum rtlx_state state; + int ret = 0; + + if (index >= RTLX_CHANNELS) { + pr_debug("rtlx_open index out of range\n"); + return -ENOSYS; + } + + if (atomic_inc_return(&channel_wqs[index].in_open) > 1) { + pr_debug("rtlx_open channel %d already opened\n", index); + ret = -EBUSY; + goto out_fail; + } + + if (rtlx == NULL) { + p = vpe_get_shared(aprp_cpu_index()); + if (p == NULL) { + if (can_sleep) { + ret = __wait_event_interruptible( + channel_wqs[index].lx_queue, + (p = vpe_get_shared(aprp_cpu_index()))); + if (ret) + goto out_fail; + } else { + pr_debug("No SP program loaded, and device opened with O_NONBLOCK\n"); + ret = -ENOSYS; + goto out_fail; + } + } + + smp_rmb(); + if (*p == NULL) { + if (can_sleep) { + DEFINE_WAIT(wait); + + for (;;) { + prepare_to_wait( + &channel_wqs[index].lx_queue, + &wait, TASK_INTERRUPTIBLE); + smp_rmb(); + if (*p != NULL) + break; + if (!signal_pending(current)) { + schedule(); + continue; + } + ret = -ERESTARTSYS; + goto out_fail; + } + finish_wait(&channel_wqs[index].lx_queue, + &wait); + } else { + pr_err(" *vpe_get_shared is NULL. Has an SP program been loaded?\n"); + ret = -ENOSYS; + goto out_fail; + } + } + + if ((unsigned int)*p < KSEG0) { + pr_warn("vpe_get_shared returned an invalid pointer maybe an error code %d\n", + (int)*p); + ret = -ENOSYS; + goto out_fail; + } + + ret = rtlx_init(*p); + if (ret < 0) + goto out_ret; + } + + chan = &rtlx->channel[index]; + + state = xchg(&chan->lx_state, RTLX_STATE_OPENED); + if (state == RTLX_STATE_OPENED) { + ret = -EBUSY; + goto out_fail; + } + +out_fail: + smp_mb(); + atomic_dec(&channel_wqs[index].in_open); + smp_mb(); + +out_ret: + return ret; +} + +int rtlx_release(int index) +{ + if (rtlx == NULL) { + pr_err("rtlx_release() with null rtlx\n"); + return 0; + } + rtlx->channel[index].lx_state = RTLX_STATE_UNUSED; + return 0; +} + +unsigned int rtlx_read_poll(int index, int can_sleep) +{ + struct rtlx_channel *chan; + + if (rtlx == NULL) + return 0; + + chan = &rtlx->channel[index]; + + /* data available to read? */ + if (chan->lx_read == chan->lx_write) { + if (can_sleep) { + int ret = __wait_event_interruptible( + channel_wqs[index].lx_queue, + (chan->lx_read != chan->lx_write) || + sp_stopping); + if (ret) + return ret; + + if (sp_stopping) + return 0; + } else + return 0; + } + + return (chan->lx_write + chan->buffer_size - chan->lx_read) + % chan->buffer_size; +} + +static inline int write_spacefree(int read, int write, int size) +{ + if (read == write) { + /* + * Never fill the buffer completely, so indexes are always + * equal if empty and only empty, or !equal if data available + */ + return size - 1; + } + + return ((read + size - write) % size) - 1; +} + +unsigned int rtlx_write_poll(int index) +{ + struct rtlx_channel *chan = &rtlx->channel[index]; + + return write_spacefree(chan->rt_read, chan->rt_write, + chan->buffer_size); +} + +ssize_t rtlx_read(int index, void __user *buff, size_t count) +{ + size_t lx_write, fl = 0L; + struct rtlx_channel *lx; + unsigned long failed; + + if (rtlx == NULL) + return -ENOSYS; + + lx = &rtlx->channel[index]; + + mutex_lock(&channel_wqs[index].mutex); + smp_rmb(); + lx_write = lx->lx_write; + + /* find out how much in total */ + count = min(count, + (size_t)(lx_write + lx->buffer_size - lx->lx_read) + % lx->buffer_size); + + /* then how much from the read pointer onwards */ + fl = min(count, (size_t)lx->buffer_size - lx->lx_read); + + failed = copy_to_user(buff, lx->lx_buffer + lx->lx_read, fl); + if (failed) + goto out; + + /* and if there is anything left at the beginning of the buffer */ + if (count - fl) + failed = copy_to_user(buff + fl, lx->lx_buffer, count - fl); + +out: + count -= failed; + + smp_wmb(); + lx->lx_read = (lx->lx_read + count) % lx->buffer_size; + smp_wmb(); + mutex_unlock(&channel_wqs[index].mutex); + + return count; +} + +ssize_t rtlx_write(int index, const void __user *buffer, size_t count) +{ + struct rtlx_channel *rt; + unsigned long failed; + size_t rt_read; + size_t fl; + + if (rtlx == NULL) + return -ENOSYS; + + rt = &rtlx->channel[index]; + + mutex_lock(&channel_wqs[index].mutex); + smp_rmb(); + rt_read = rt->rt_read; + + /* total number of bytes to copy */ + count = min_t(size_t, count, write_spacefree(rt_read, rt->rt_write, + rt->buffer_size)); + + /* first bit from write pointer to the end of the buffer, or count */ + fl = min(count, (size_t) rt->buffer_size - rt->rt_write); + + failed = copy_from_user(rt->rt_buffer + rt->rt_write, buffer, fl); + if (failed) + goto out; + + /* if there's any left copy to the beginning of the buffer */ + if (count - fl) + failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + +out: + count -= failed; + + smp_wmb(); + rt->rt_write = (rt->rt_write + count) % rt->buffer_size; + smp_wmb(); + mutex_unlock(&channel_wqs[index].mutex); + + _interrupt_sp(); + + return count; +} + + +static int file_open(struct inode *inode, struct file *filp) +{ + return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1); +} + +static int file_release(struct inode *inode, struct file *filp) +{ + return rtlx_release(iminor(inode)); +} + +static __poll_t file_poll(struct file *file, poll_table *wait) +{ + int minor = iminor(file_inode(file)); + __poll_t mask = 0; + + poll_wait(file, &channel_wqs[minor].rt_queue, wait); + poll_wait(file, &channel_wqs[minor].lx_queue, wait); + + if (rtlx == NULL) + return 0; + + /* data available to read? */ + if (rtlx_read_poll(minor, 0)) + mask |= EPOLLIN | EPOLLRDNORM; + + /* space to write */ + if (rtlx_write_poll(minor)) + mask |= EPOLLOUT | EPOLLWRNORM; + + return mask; +} + +static ssize_t file_read(struct file *file, char __user *buffer, size_t count, + loff_t *ppos) +{ + int minor = iminor(file_inode(file)); + + /* data available? */ + if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) + return 0; /* -EAGAIN makes 'cat' whine */ + + return rtlx_read(minor, buffer, count); +} + +static ssize_t file_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + int minor = iminor(file_inode(file)); + + /* any space left... */ + if (!rtlx_write_poll(minor)) { + int ret; + + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + ret = __wait_event_interruptible(channel_wqs[minor].rt_queue, + rtlx_write_poll(minor)); + if (ret) + return ret; + } + + return rtlx_write(minor, buffer, count); +} + +const struct file_operations rtlx_fops = { + .owner = THIS_MODULE, + .open = file_open, + .release = file_release, + .write = file_write, + .read = file_read, + .poll = file_poll, + .llseek = noop_llseek, +}; + +module_init(rtlx_module_init); +module_exit(rtlx_module_exit); + +MODULE_DESCRIPTION("MIPS RTLX"); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S new file mode 100644 index 000000000..b449b6866 --- /dev/null +++ b/arch/mips/kernel/scall32-o32.S @@ -0,0 +1,225 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995-99, 2000- 02, 06 Ralf Baechle <ralf@linux-mips.org> + * Copyright (C) 2001 MIPS Technologies, Inc. + * Copyright (C) 2004 Thiemo Seufer + * Copyright (C) 2014 Imagination Technologies Ltd. + */ +#include <linux/errno.h> +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/irqflags.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/isadep.h> +#include <asm/sysmips.h> +#include <asm/thread_info.h> +#include <asm/unistd.h> +#include <asm/war.h> +#include <asm/asm-offsets.h> + + .align 5 +NESTED(handle_sys, PT_SIZE, sp) + .set noat + SAVE_SOME + TRACE_IRQS_ON_RELOAD + STI + .set at + + lw t1, PT_EPC(sp) # skip syscall on return + + addiu t1, 4 # skip to next instruction + sw t1, PT_EPC(sp) + + sw a3, PT_R26(sp) # save a3 for syscall restarting + + /* + * More than four arguments. Try to deal with it by copying the + * stack arguments from the user stack to the kernel stack. + * This Sucks (TM). + */ + lw t0, PT_R29(sp) # get old user stack pointer + + /* + * We intentionally keep the kernel stack a little below the top of + * userspace so we don't have to do a slower byte accurate check here. + */ + lw t5, TI_ADDR_LIMIT($28) + addu t4, t0, 32 + and t5, t4 + bltz t5, bad_stack # -> sp is bad + + /* + * Ok, copy the args from the luser stack to the kernel stack. + */ + + .set push + .set noreorder + .set nomacro + +load_a4: user_lw(t5, 16(t0)) # argument #5 from usp +load_a5: user_lw(t6, 20(t0)) # argument #6 from usp +load_a6: user_lw(t7, 24(t0)) # argument #7 from usp +load_a7: user_lw(t8, 28(t0)) # argument #8 from usp +loads_done: + + sw t5, 16(sp) # argument #5 to ksp + sw t6, 20(sp) # argument #6 to ksp + sw t7, 24(sp) # argument #7 to ksp + sw t8, 28(sp) # argument #8 to ksp + .set pop + + .section __ex_table,"a" + PTR load_a4, bad_stack_a4 + PTR load_a5, bad_stack_a5 + PTR load_a6, bad_stack_a6 + PTR load_a7, bad_stack_a7 + .previous + + lw t0, TI_FLAGS($28) # syscall tracing enabled? + li t1, _TIF_WORK_SYSCALL_ENTRY + and t0, t1 + bnez t0, syscall_trace_entry # -> yes +syscall_common: + subu v0, v0, __NR_O32_Linux # check syscall number + sltiu t0, v0, __NR_O32_Linux_syscalls + beqz t0, illegal_syscall + + sll t0, v0, 2 + la t1, sys_call_table + addu t1, t0 + lw t2, (t1) # syscall routine + + beqz t2, illegal_syscall + + jalr t2 # Do The Real Thing (TM) + + li t0, -EMAXERRNO - 1 # error? + sltu t0, t0, v0 + sw t0, PT_R7(sp) # set error flag + beqz t0, 1f + + lw t1, PT_R2(sp) # syscall number + negu v0 # error + sw t1, PT_R0(sp) # save it for syscall restarting +1: sw v0, PT_R2(sp) # result + +o32_syscall_exit: + j syscall_exit_partial + +/* ------------------------------------------------------------------------ */ + +syscall_trace_entry: + SAVE_STATIC + move a0, sp + + /* + * syscall number is in v0 unless we called syscall(__NR_###) + * where the real syscall number is in a0 + */ + move a1, v0 + subu t2, v0, __NR_O32_Linux + bnez t2, 1f /* __NR_syscall at offset 0 */ + lw a1, PT_R4(sp) + +1: jal syscall_trace_enter + + bltz v0, 1f # seccomp failed? Skip syscall + + RESTORE_STATIC + lw v0, PT_R2(sp) # Restore syscall (maybe modified) + lw a0, PT_R4(sp) # Restore argument registers + lw a1, PT_R5(sp) + lw a2, PT_R6(sp) + lw a3, PT_R7(sp) + j syscall_common + +1: j syscall_exit + +/* ------------------------------------------------------------------------ */ + + /* + * Our open-coded access area sanity test for the stack pointer + * failed. We probably should handle this case a bit more drastic. + */ +bad_stack: + li v0, EFAULT + sw v0, PT_R2(sp) + li t0, 1 # set error flag + sw t0, PT_R7(sp) + j o32_syscall_exit + +bad_stack_a4: + li t5, 0 + b load_a5 + +bad_stack_a5: + li t6, 0 + b load_a6 + +bad_stack_a6: + li t7, 0 + b load_a7 + +bad_stack_a7: + li t8, 0 + b loads_done + + /* + * The system call does not exist in this kernel + */ +illegal_syscall: + li v0, ENOSYS # error + sw v0, PT_R2(sp) + li t0, 1 # set error flag + sw t0, PT_R7(sp) + j o32_syscall_exit + END(handle_sys) + + LEAF(sys_syscall) + subu t0, a0, __NR_O32_Linux # check syscall number + sltiu v0, t0, __NR_O32_Linux_syscalls + beqz t0, einval # do not recurse + sll t1, t0, 2 + beqz v0, einval + lw t2, sys_call_table(t1) # syscall routine + + move a0, a1 # shift argument registers + move a1, a2 + move a2, a3 + lw a3, 16(sp) + lw t4, 20(sp) + lw t5, 24(sp) + lw t6, 28(sp) + sw t4, 16(sp) + sw t5, 20(sp) + sw t6, 24(sp) + jr t2 + /* Unreached */ + +einval: li v0, -ENOSYS + jr ra + END(sys_syscall) + +#ifdef CONFIG_MIPS_MT_FPAFF + /* + * For FPU affinity scheduling on MIPS MT processors, we need to + * intercept sys_sched_xxxaffinity() calls until we get a proper hook + * in kernel/sched/core.c. Considered only temporary we only support + * these hooks for the 32-bit kernel - there is no MIPS64 MT processor + * atm. + */ +#define sys_sched_setaffinity mipsmt_sys_sched_setaffinity +#define sys_sched_getaffinity mipsmt_sys_sched_getaffinity +#endif /* CONFIG_MIPS_MT_FPAFF */ + +#define __SYSCALL(nr, entry) PTR entry + .align 2 + .type sys_call_table, @object +EXPORT(sys_call_table) +#include <asm/syscall_table_32_o32.h> +#undef __SYSCALL diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S new file mode 100644 index 000000000..35d8c86b1 --- /dev/null +++ b/arch/mips/kernel/scall64-n32.S @@ -0,0 +1,108 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#include <linux/errno.h> +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/irqflags.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/thread_info.h> +#include <asm/unistd.h> + +#ifndef CONFIG_MIPS32_O32 +/* No O32, so define handle_sys here */ +#define handle_sysn32 handle_sys +#endif + + .align 5 +NESTED(handle_sysn32, PT_SIZE, sp) +#ifndef CONFIG_MIPS32_O32 + .set noat + SAVE_SOME + TRACE_IRQS_ON_RELOAD + STI + .set at +#endif + + dsubu t0, v0, __NR_N32_Linux # check syscall number + sltiu t0, t0, __NR_N32_Linux_syscalls + +#ifndef CONFIG_MIPS32_O32 + ld t1, PT_EPC(sp) # skip syscall on return + daddiu t1, 4 # skip to next instruction + sd t1, PT_EPC(sp) +#endif + beqz t0, not_n32_scall + + sd a3, PT_R26(sp) # save a3 for syscall restarting + + li t1, _TIF_WORK_SYSCALL_ENTRY + LONG_L t0, TI_FLAGS($28) # syscall tracing enabled? + and t0, t1, t0 + bnez t0, n32_syscall_trace_entry + +syscall_common: + dsll t0, v0, 3 # offset into table + ld t2, (sysn32_call_table - (__NR_N32_Linux * 8))(t0) + + jalr t2 # Do The Real Thing (TM) + + li t0, -EMAXERRNO - 1 # error? + sltu t0, t0, v0 + sd t0, PT_R7(sp) # set error flag + beqz t0, 1f + + ld t1, PT_R2(sp) # syscall number + dnegu v0 # error + sd t1, PT_R0(sp) # save it for syscall restarting +1: sd v0, PT_R2(sp) # result + + j syscall_exit_partial + +/* ------------------------------------------------------------------------ */ + +n32_syscall_trace_entry: + SAVE_STATIC + move a0, sp + move a1, v0 + jal syscall_trace_enter + + bltz v0, 1f # seccomp failed? Skip syscall + + RESTORE_STATIC + ld v0, PT_R2(sp) # Restore syscall (maybe modified) + ld a0, PT_R4(sp) # Restore argument registers + ld a1, PT_R5(sp) + ld a2, PT_R6(sp) + ld a3, PT_R7(sp) + ld a4, PT_R8(sp) + ld a5, PT_R9(sp) + + dsubu t2, v0, __NR_N32_Linux # check (new) syscall number + sltiu t0, t2, __NR_N32_Linux_syscalls + beqz t0, not_n32_scall + + j syscall_common + +1: j syscall_exit + +not_n32_scall: + /* This is not an n32 compatibility syscall, pass it on to + the n64 syscall handlers. */ + j handle_sys64 + + END(handle_sysn32) + +#define __SYSCALL(nr, entry) PTR entry + .type sysn32_call_table, @object +EXPORT(sysn32_call_table) +#include <asm/syscall_table_64_n32.h> +#undef __SYSCALL diff --git a/arch/mips/kernel/scall64-n64.S b/arch/mips/kernel/scall64-n64.S new file mode 100644 index 000000000..23b2e2b16 --- /dev/null +++ b/arch/mips/kernel/scall64-n64.S @@ -0,0 +1,117 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#include <linux/errno.h> +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/irqflags.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/asm-offsets.h> +#include <asm/sysmips.h> +#include <asm/thread_info.h> +#include <asm/unistd.h> +#include <asm/war.h> + +#ifndef CONFIG_BINFMT_ELF32 +/* Neither O32 nor N32, so define handle_sys here */ +#define handle_sys64 handle_sys +#endif + + .align 5 +NESTED(handle_sys64, PT_SIZE, sp) +#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32) + /* + * When 32-bit compatibility is configured scall_o32.S + * already did this. + */ + .set noat + SAVE_SOME + TRACE_IRQS_ON_RELOAD + STI + .set at +#endif + +#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32) + ld t1, PT_EPC(sp) # skip syscall on return + daddiu t1, 4 # skip to next instruction + sd t1, PT_EPC(sp) +#endif + + sd a3, PT_R26(sp) # save a3 for syscall restarting + + li t1, _TIF_WORK_SYSCALL_ENTRY + LONG_L t0, TI_FLAGS($28) # syscall tracing enabled? + and t0, t1, t0 + bnez t0, syscall_trace_entry + +syscall_common: + dsubu t2, v0, __NR_64_Linux + sltiu t0, t2, __NR_64_Linux_syscalls + beqz t0, illegal_syscall + + dsll t0, t2, 3 # offset into table + dla t2, sys_call_table + daddu t0, t2, t0 + ld t2, (t0) # syscall routine + beqz t2, illegal_syscall + + jalr t2 # Do The Real Thing (TM) + + li t0, -EMAXERRNO - 1 # error? + sltu t0, t0, v0 + sd t0, PT_R7(sp) # set error flag + beqz t0, 1f + + ld t1, PT_R2(sp) # syscall number + dnegu v0 # error + sd t1, PT_R0(sp) # save it for syscall restarting +1: sd v0, PT_R2(sp) # result + +n64_syscall_exit: + j syscall_exit_partial + +/* ------------------------------------------------------------------------ */ + +syscall_trace_entry: + SAVE_STATIC + move a0, sp + move a1, v0 + jal syscall_trace_enter + + bltz v0, 1f # seccomp failed? Skip syscall + + RESTORE_STATIC + ld v0, PT_R2(sp) # Restore syscall (maybe modified) + ld a0, PT_R4(sp) # Restore argument registers + ld a1, PT_R5(sp) + ld a2, PT_R6(sp) + ld a3, PT_R7(sp) + ld a4, PT_R8(sp) + ld a5, PT_R9(sp) + j syscall_common + +1: j syscall_exit + +illegal_syscall: + /* This also isn't a 64-bit syscall, throw an error. */ + li v0, ENOSYS # error + sd v0, PT_R2(sp) + li t0, 1 # set error flag + sd t0, PT_R7(sp) + j n64_syscall_exit + END(handle_sys64) + +#define __SYSCALL(nr, entry) PTR entry + .align 3 + .type sys_call_table, @object +EXPORT(sys_call_table) +#include <asm/syscall_table_64_n64.h> +#undef __SYSCALL diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S new file mode 100644 index 000000000..50c9a57e0 --- /dev/null +++ b/arch/mips/kernel/scall64-o32.S @@ -0,0 +1,221 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 - 2000, 2001 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + * Copyright (C) 2004 Thiemo Seufer + * + * Hairy, the userspace application uses a different argument passing + * convention than the kernel, so we have to translate things from o32 + * to ABI64 calling convention. 64-bit syscalls are also processed + * here for now. + */ +#include <linux/errno.h> +#include <asm/asm.h> +#include <asm/asmmacro.h> +#include <asm/irqflags.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> +#include <asm/thread_info.h> +#include <asm/unistd.h> +#include <asm/sysmips.h> + + .align 5 +NESTED(handle_sys, PT_SIZE, sp) + .set noat + SAVE_SOME + TRACE_IRQS_ON_RELOAD + STI + .set at + ld t1, PT_EPC(sp) # skip syscall on return + + dsubu t0, v0, __NR_O32_Linux # check syscall number + sltiu t0, t0, __NR_O32_Linux_syscalls + daddiu t1, 4 # skip to next instruction + sd t1, PT_EPC(sp) + beqz t0, not_o32_scall +#if 0 + SAVE_ALL + move a1, v0 + ASM_PRINT("Scall %ld\n") + RESTORE_ALL +#endif + + /* We don't want to stumble over broken sign extensions from + userland. O32 does never use the upper half. */ + sll a0, a0, 0 + sll a1, a1, 0 + sll a2, a2, 0 + sll a3, a3, 0 + + sd a3, PT_R26(sp) # save a3 for syscall restarting + + /* + * More than four arguments. Try to deal with it by copying the + * stack arguments from the user stack to the kernel stack. + * This Sucks (TM). + * + * We intentionally keep the kernel stack a little below the top of + * userspace so we don't have to do a slower byte accurate check here. + */ + ld t0, PT_R29(sp) # get old user stack pointer + daddu t1, t0, 32 + bltz t1, bad_stack + +load_a4: lw a4, 16(t0) # argument #5 from usp +load_a5: lw a5, 20(t0) # argument #6 from usp +load_a6: lw a6, 24(t0) # argument #7 from usp +load_a7: lw a7, 28(t0) # argument #8 from usp +loads_done: + + .section __ex_table,"a" + PTR load_a4, bad_stack_a4 + PTR load_a5, bad_stack_a5 + PTR load_a6, bad_stack_a6 + PTR load_a7, bad_stack_a7 + .previous + + li t1, _TIF_WORK_SYSCALL_ENTRY + LONG_L t0, TI_FLAGS($28) # syscall tracing enabled? + and t0, t1, t0 + bnez t0, trace_a_syscall + +syscall_common: + dsll t0, v0, 3 # offset into table + ld t2, (sys32_call_table - (__NR_O32_Linux * 8))(t0) + + jalr t2 # Do The Real Thing (TM) + + li t0, -EMAXERRNO - 1 # error? + sltu t0, t0, v0 + sd t0, PT_R7(sp) # set error flag + beqz t0, 1f + + ld t1, PT_R2(sp) # syscall number + dnegu v0 # error + sd t1, PT_R0(sp) # save it for syscall restarting +1: sd v0, PT_R2(sp) # result + +o32_syscall_exit: + j syscall_exit_partial + +/* ------------------------------------------------------------------------ */ + +trace_a_syscall: + SAVE_STATIC + sd a4, PT_R8(sp) # Save argument registers + sd a5, PT_R9(sp) + sd a6, PT_R10(sp) + sd a7, PT_R11(sp) # For indirect syscalls + + move a0, sp + /* + * absolute syscall number is in v0 unless we called syscall(__NR_###) + * where the real syscall number is in a0 + * note: NR_syscall is the first O32 syscall but the macro is + * only defined when compiling with -mabi=32 (CONFIG_32BIT) + * therefore __NR_O32_Linux is used (4000) + */ + .set push + .set reorder + subu t1, v0, __NR_O32_Linux + move a1, v0 + bnez t1, 1f /* __NR_syscall at offset 0 */ + ld a1, PT_R4(sp) /* Arg1 for __NR_syscall case */ + .set pop + +1: jal syscall_trace_enter + + bltz v0, 1f # seccomp failed? Skip syscall + + RESTORE_STATIC + ld v0, PT_R2(sp) # Restore syscall (maybe modified) + ld a0, PT_R4(sp) # Restore argument registers + ld a1, PT_R5(sp) + ld a2, PT_R6(sp) + ld a3, PT_R7(sp) + ld a4, PT_R8(sp) + ld a5, PT_R9(sp) + ld a6, PT_R10(sp) + ld a7, PT_R11(sp) # For indirect syscalls + + dsubu t0, v0, __NR_O32_Linux # check (new) syscall number + sltiu t0, t0, __NR_O32_Linux_syscalls + beqz t0, not_o32_scall + + j syscall_common + +1: j syscall_exit + +/* ------------------------------------------------------------------------ */ + + /* + * The stackpointer for a call with more than 4 arguments is bad. + */ +bad_stack: + li v0, EFAULT + sd v0, PT_R2(sp) + li t0, 1 # set error flag + sd t0, PT_R7(sp) + j o32_syscall_exit + +bad_stack_a4: + li a4, 0 + b load_a5 + +bad_stack_a5: + li a5, 0 + b load_a6 + +bad_stack_a6: + li a6, 0 + b load_a7 + +bad_stack_a7: + li a7, 0 + b loads_done + +not_o32_scall: + /* + * This is not an o32 compatibility syscall, pass it on + * to the 64-bit syscall handlers. + */ +#ifdef CONFIG_MIPS32_N32 + j handle_sysn32 +#else + j handle_sys64 +#endif + END(handle_sys) + +LEAF(sys32_syscall) + subu t0, a0, __NR_O32_Linux # check syscall number + sltiu v0, t0, __NR_O32_Linux_syscalls + beqz t0, einval # do not recurse + dsll t1, t0, 3 + beqz v0, einval + ld t2, sys32_call_table(t1) # syscall routine + + move a0, a1 # shift argument registers + move a1, a2 + move a2, a3 + move a3, a4 + move a4, a5 + move a5, a6 + move a6, a7 + jr t2 + /* Unreached */ + +einval: li v0, -ENOSYS + jr ra + END(sys32_syscall) + +#define __SYSCALL(nr, entry) PTR entry + .align 3 + .type sys32_call_table,@object +EXPORT(sys32_call_table) +#include <asm/syscall_table_64_o32.h> +#undef __SYSCALL diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c new file mode 100644 index 000000000..0a9bd7b09 --- /dev/null +++ b/arch/mips/kernel/segment.c @@ -0,0 +1,104 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2013 Imagination Technologies Ltd. + */ + +#include <linux/kernel.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <asm/cpu.h> +#include <asm/debug.h> +#include <asm/mipsregs.h> + +static void build_segment_config(char *str, unsigned int cfg) +{ + unsigned int am; + static const char * const am_str[] = { + "UK", "MK", "MSK", "MUSK", "MUSUK", "USK", + "RSRVD", "UUSK"}; + + /* Segment access mode. */ + am = (cfg & MIPS_SEGCFG_AM) >> MIPS_SEGCFG_AM_SHIFT; + str += sprintf(str, "%-5s", am_str[am]); + + /* + * Access modes MK, MSK and MUSK are mapped segments. Therefore + * there is no direct physical address mapping unless it becomes + * unmapped uncached at error level due to EU. + */ + if ((am == 0) || (am > 3) || (cfg & MIPS_SEGCFG_EU)) + str += sprintf(str, " %03lx", + ((cfg & MIPS_SEGCFG_PA) >> MIPS_SEGCFG_PA_SHIFT)); + else + str += sprintf(str, " UND"); + + if ((am == 0) || (am > 3)) + str += sprintf(str, " %01ld", + ((cfg & MIPS_SEGCFG_C) >> MIPS_SEGCFG_C_SHIFT)); + else + str += sprintf(str, " U"); + + /* Exception configuration. */ + str += sprintf(str, " %01ld\n", + ((cfg & MIPS_SEGCFG_EU) >> MIPS_SEGCFG_EU_SHIFT)); +} + +static int show_segments(struct seq_file *m, void *v) +{ + unsigned int segcfg; + char str[42]; + + seq_puts(m, "Segment Virtual Size Access Mode Physical Caching EU\n"); + seq_puts(m, "------- ------- ---- ----------- -------- ------- --\n"); + + segcfg = read_c0_segctl0(); + build_segment_config(str, segcfg); + seq_printf(m, " 0 e0000000 512M %s", str); + + segcfg >>= 16; + build_segment_config(str, segcfg); + seq_printf(m, " 1 c0000000 512M %s", str); + + segcfg = read_c0_segctl1(); + build_segment_config(str, segcfg); + seq_printf(m, " 2 a0000000 512M %s", str); + + segcfg >>= 16; + build_segment_config(str, segcfg); + seq_printf(m, " 3 80000000 512M %s", str); + + segcfg = read_c0_segctl2(); + build_segment_config(str, segcfg); + seq_printf(m, " 4 40000000 1G %s", str); + + segcfg >>= 16; + build_segment_config(str, segcfg); + seq_printf(m, " 5 00000000 1G %s\n", str); + + return 0; +} + +static int segments_open(struct inode *inode, struct file *file) +{ + return single_open(file, show_segments, NULL); +} + +static const struct file_operations segments_fops = { + .open = segments_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init segments_info(void) +{ + if (cpu_has_segments) + debugfs_create_file("segments", S_IRUGO, mips_debugfs_dir, NULL, + &segments_fops); + return 0; +} + +device_initcall(segments_info); diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c new file mode 100644 index 000000000..66643cb65 --- /dev/null +++ b/arch/mips/kernel/setup.c @@ -0,0 +1,844 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 Linus Torvalds + * Copyright (C) 1995 Waldorf Electronics + * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 Ralf Baechle + * Copyright (C) 1996 Stoned Elipot + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki + */ +#include <linux/init.h> +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/screen_info.h> +#include <linux/memblock.h> +#include <linux/initrd.h> +#include <linux/root_dev.h> +#include <linux/highmem.h> +#include <linux/console.h> +#include <linux/pfn.h> +#include <linux/debugfs.h> +#include <linux/kexec.h> +#include <linux/sizes.h> +#include <linux/device.h> +#include <linux/dma-map-ops.h> +#include <linux/decompress/generic.h> +#include <linux/of_fdt.h> +#include <linux/of_reserved_mem.h> +#include <linux/dmi.h> + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm/bugs.h> +#include <asm/cache.h> +#include <asm/cdmm.h> +#include <asm/cpu.h> +#include <asm/debug.h> +#include <asm/dma-coherence.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/smp-ops.h> +#include <asm/prom.h> + +#ifdef CONFIG_MIPS_ELF_APPENDED_DTB +const char __section(".appended_dtb") __appended_dtb[0x100000]; +#endif /* CONFIG_MIPS_ELF_APPENDED_DTB */ + +struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly; + +EXPORT_SYMBOL(cpu_data); + +#ifdef CONFIG_VT +struct screen_info screen_info; +#endif + +/* + * Setup information + * + * These are initialized so they are in the .data section + */ +unsigned long mips_machtype __read_mostly = MACH_UNKNOWN; + +EXPORT_SYMBOL(mips_machtype); + +static char __initdata command_line[COMMAND_LINE_SIZE]; +char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; + +#ifdef CONFIG_CMDLINE_BOOL +static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE; +#else +static const char builtin_cmdline[] __initconst = ""; +#endif + +/* + * mips_io_port_base is the begin of the address space to which x86 style + * I/O ports are mapped. + */ +unsigned long mips_io_port_base = -1; +EXPORT_SYMBOL(mips_io_port_base); + +static struct resource code_resource = { .name = "Kernel code", }; +static struct resource data_resource = { .name = "Kernel data", }; +static struct resource bss_resource = { .name = "Kernel bss", }; + +static void *detect_magic __initdata = detect_memory_region; + +#ifdef CONFIG_MIPS_AUTO_PFN_OFFSET +unsigned long ARCH_PFN_OFFSET; +EXPORT_SYMBOL(ARCH_PFN_OFFSET); +#endif + +void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max) +{ + void *dm = &detect_magic; + phys_addr_t size; + + for (size = sz_min; size < sz_max; size <<= 1) { + if (!memcmp(dm, dm + size, sizeof(detect_magic))) + break; + } + + pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n", + ((unsigned long long) size) / SZ_1M, + (unsigned long long) start, + ((unsigned long long) sz_min) / SZ_1M, + ((unsigned long long) sz_max) / SZ_1M); + + memblock_add(start, size); +} + +/* + * Manage initrd + */ +#ifdef CONFIG_BLK_DEV_INITRD + +static int __init rd_start_early(char *p) +{ + unsigned long start = memparse(p, &p); + +#ifdef CONFIG_64BIT + /* Guess if the sign extension was forgotten by bootloader */ + if (start < XKPHYS) + start = (int)start; +#endif + initrd_start = start; + initrd_end += start; + return 0; +} +early_param("rd_start", rd_start_early); + +static int __init rd_size_early(char *p) +{ + initrd_end += memparse(p, &p); + return 0; +} +early_param("rd_size", rd_size_early); + +/* it returns the next free pfn after initrd */ +static unsigned long __init init_initrd(void) +{ + unsigned long end; + + /* + * Board specific code or command line parser should have + * already set up initrd_start and initrd_end. In these cases + * perfom sanity checks and use them if all looks good. + */ + if (!initrd_start || initrd_end <= initrd_start) + goto disable; + + if (initrd_start & ~PAGE_MASK) { + pr_err("initrd start must be page aligned\n"); + goto disable; + } + + /* + * Sanitize initrd addresses. For example firmware + * can't guess if they need to pass them through + * 64-bits values if the kernel has been built in pure + * 32-bit. We need also to switch from KSEG0 to XKPHYS + * addresses now, so the code can now safely use __pa(). + */ + end = __pa(initrd_end); + initrd_end = (unsigned long)__va(end); + initrd_start = (unsigned long)__va(__pa(initrd_start)); + + if (initrd_start < PAGE_OFFSET) { + pr_err("initrd start < PAGE_OFFSET\n"); + goto disable; + } + + ROOT_DEV = Root_RAM0; + return PFN_UP(end); +disable: + initrd_start = 0; + initrd_end = 0; + return 0; +} + +/* In some conditions (e.g. big endian bootloader with a little endian + kernel), the initrd might appear byte swapped. Try to detect this and + byte swap it if needed. */ +static void __init maybe_bswap_initrd(void) +{ +#if defined(CONFIG_CPU_CAVIUM_OCTEON) + u64 buf; + + /* Check for CPIO signature */ + if (!memcmp((void *)initrd_start, "070701", 6)) + return; + + /* Check for compressed initrd */ + if (decompress_method((unsigned char *)initrd_start, 8, NULL)) + return; + + /* Try again with a byte swapped header */ + buf = swab64p((u64 *)initrd_start); + if (!memcmp(&buf, "070701", 6) || + decompress_method((unsigned char *)(&buf), 8, NULL)) { + unsigned long i; + + pr_info("Byteswapped initrd detected\n"); + for (i = initrd_start; i < ALIGN(initrd_end, 8); i += 8) + swab64s((u64 *)i); + } +#endif +} + +static void __init finalize_initrd(void) +{ + unsigned long size = initrd_end - initrd_start; + + if (size == 0) { + printk(KERN_INFO "Initrd not found or empty"); + goto disable; + } + if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) { + printk(KERN_ERR "Initrd extends beyond end of memory"); + goto disable; + } + + maybe_bswap_initrd(); + + memblock_reserve(__pa(initrd_start), size); + initrd_below_start_ok = 1; + + pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n", + initrd_start, size); + return; +disable: + printk(KERN_CONT " - disabling initrd\n"); + initrd_start = 0; + initrd_end = 0; +} + +#else /* !CONFIG_BLK_DEV_INITRD */ + +static unsigned long __init init_initrd(void) +{ + return 0; +} + +#define finalize_initrd() do {} while (0) + +#endif + +/* + * Initialize the bootmem allocator. It also setup initrd related data + * if needed. + */ +#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA)) + +static void __init bootmem_init(void) +{ + init_initrd(); + finalize_initrd(); +} + +#else /* !CONFIG_SGI_IP27 */ + +static void __init bootmem_init(void) +{ + phys_addr_t ramstart, ramend; + unsigned long start, end; + int i; + + ramstart = memblock_start_of_DRAM(); + ramend = memblock_end_of_DRAM(); + + /* + * Sanity check any INITRD first. We don't take it into account + * for bootmem setup initially, rely on the end-of-kernel-code + * as our memory range starting point. Once bootmem is inited we + * will reserve the area used for the initrd. + */ + init_initrd(); + + /* Reserve memory occupied by kernel. */ + memblock_reserve(__pa_symbol(&_text), + __pa_symbol(&_end) - __pa_symbol(&_text)); + + /* max_low_pfn is not a number of pages but the end pfn of low mem */ + +#ifdef CONFIG_MIPS_AUTO_PFN_OFFSET + ARCH_PFN_OFFSET = PFN_UP(ramstart); +#else + /* + * Reserve any memory between the start of RAM and PHYS_OFFSET + */ + if (ramstart > PHYS_OFFSET) + memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); + + if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { + pr_info("Wasting %lu bytes for tracking %lu unused pages\n", + (unsigned long)((PFN_UP(ramstart) - ARCH_PFN_OFFSET) * sizeof(struct page)), + (unsigned long)(PFN_UP(ramstart) - ARCH_PFN_OFFSET)); + } +#endif + + min_low_pfn = ARCH_PFN_OFFSET; + max_pfn = PFN_DOWN(ramend); + for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, NULL) { + /* + * Skip highmem here so we get an accurate max_low_pfn if low + * memory stops short of high memory. + * If the region overlaps HIGHMEM_START, end is clipped so + * max_pfn excludes the highmem portion. + */ + if (start >= PFN_DOWN(HIGHMEM_START)) + continue; + if (end > PFN_DOWN(HIGHMEM_START)) + end = PFN_DOWN(HIGHMEM_START); + if (end > max_low_pfn) + max_low_pfn = end; + } + + if (min_low_pfn >= max_low_pfn) + panic("Incorrect memory mapping !!!"); + + if (max_pfn > PFN_DOWN(HIGHMEM_START)) { + max_low_pfn = PFN_DOWN(HIGHMEM_START); +#ifdef CONFIG_HIGHMEM + highstart_pfn = max_low_pfn; + highend_pfn = max_pfn; +#else + max_pfn = max_low_pfn; +#endif + } + + /* + * Reserve initrd memory if needed. + */ + finalize_initrd(); +} + +#endif /* CONFIG_SGI_IP27 */ + +static int usermem __initdata; + +static int __init early_parse_mem(char *p) +{ + phys_addr_t start, size; + + /* + * If a user specifies memory size, we + * blow away any automatically generated + * size. + */ + if (usermem == 0) { + usermem = 1; + memblock_remove(memblock_start_of_DRAM(), + memblock_end_of_DRAM() - memblock_start_of_DRAM()); + } + start = 0; + size = memparse(p, &p); + if (*p == '@') + start = memparse(p + 1, &p); + + memblock_add(start, size); + + return 0; +} +early_param("mem", early_parse_mem); + +static int __init early_parse_memmap(char *p) +{ + char *oldp; + u64 start_at, mem_size; + + if (!p) + return -EINVAL; + + if (!strncmp(p, "exactmap", 8)) { + pr_err("\"memmap=exactmap\" invalid on MIPS\n"); + return 0; + } + + oldp = p; + mem_size = memparse(p, &p); + if (p == oldp) + return -EINVAL; + + if (*p == '@') { + start_at = memparse(p+1, &p); + memblock_add(start_at, mem_size); + } else if (*p == '#') { + pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n"); + return -EINVAL; + } else if (*p == '$') { + start_at = memparse(p+1, &p); + memblock_add(start_at, mem_size); + memblock_reserve(start_at, mem_size); + } else { + pr_err("\"memmap\" invalid format!\n"); + return -EINVAL; + } + + if (*p == '\0') { + usermem = 1; + return 0; + } else + return -EINVAL; +} +early_param("memmap", early_parse_memmap); + +#ifdef CONFIG_PROC_VMCORE +static unsigned long setup_elfcorehdr, setup_elfcorehdr_size; +static int __init early_parse_elfcorehdr(char *p) +{ + phys_addr_t start, end; + u64 i; + + setup_elfcorehdr = memparse(p, &p); + + for_each_mem_range(i, &start, &end) { + if (setup_elfcorehdr >= start && setup_elfcorehdr < end) { + /* + * Reserve from the elf core header to the end of + * the memory segment, that should all be kdump + * reserved memory. + */ + setup_elfcorehdr_size = end - setup_elfcorehdr; + break; + } + } + /* + * If we don't find it in the memory map, then we shouldn't + * have to worry about it, as the new kernel won't use it. + */ + return 0; +} +early_param("elfcorehdr", early_parse_elfcorehdr); +#endif + +#ifdef CONFIG_KEXEC + +/* 64M alignment for crash kernel regions */ +#define CRASH_ALIGN SZ_64M +#define CRASH_ADDR_MAX SZ_512M + +static void __init mips_parse_crashkernel(void) +{ + unsigned long long total_mem; + unsigned long long crash_size, crash_base; + int ret; + + total_mem = memblock_phys_mem_size(); + ret = parse_crashkernel(boot_command_line, total_mem, + &crash_size, &crash_base); + if (ret != 0 || crash_size <= 0) + return; + + if (crash_base <= 0) { + crash_base = memblock_find_in_range(CRASH_ALIGN, CRASH_ADDR_MAX, + crash_size, CRASH_ALIGN); + if (!crash_base) { + pr_warn("crashkernel reservation failed - No suitable area found.\n"); + return; + } + } else { + unsigned long long start; + + start = memblock_find_in_range(crash_base, crash_base + crash_size, + crash_size, 1); + if (start != crash_base) { + pr_warn("Invalid memory region reserved for crash kernel\n"); + return; + } + } + + crashk_res.start = crash_base; + crashk_res.end = crash_base + crash_size - 1; +} + +static void __init request_crashkernel(struct resource *res) +{ + int ret; + + if (crashk_res.start == crashk_res.end) + return; + + ret = request_resource(res, &crashk_res); + if (!ret) + pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", + (unsigned long)(resource_size(&crashk_res) >> 20), + (unsigned long)(crashk_res.start >> 20)); +} +#else /* !defined(CONFIG_KEXEC) */ +static void __init mips_parse_crashkernel(void) +{ +} + +static void __init request_crashkernel(struct resource *res) +{ +} +#endif /* !defined(CONFIG_KEXEC) */ + +static void __init check_kernel_sections_mem(void) +{ + phys_addr_t start = __pa_symbol(&_text); + phys_addr_t size = __pa_symbol(&_end) - start; + + if (!memblock_is_region_memory(start, size)) { + pr_info("Kernel sections are not in the memory maps\n"); + memblock_add(start, size); + } +} + +static void __init bootcmdline_append(const char *s, size_t max) +{ + if (!s[0] || !max) + return; + + if (boot_command_line[0]) + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + + strlcat(boot_command_line, s, max); +} + +#ifdef CONFIG_OF_EARLY_FLATTREE + +static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, + int depth, void *data) +{ + bool *dt_bootargs = data; + const char *p; + int l; + + if (depth != 1 || !data || + (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) + return 0; + + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) { + bootcmdline_append(p, min(l, COMMAND_LINE_SIZE)); + *dt_bootargs = true; + } + + return 1; +} + +#endif /* CONFIG_OF_EARLY_FLATTREE */ + +static void __init bootcmdline_init(void) +{ + bool dt_bootargs = false; + + /* + * If CMDLINE_OVERRIDE is enabled then initializing the command line is + * trivial - we simply use the built-in command line unconditionally & + * unmodified. + */ + if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + return; + } + + /* + * If the user specified a built-in command line & + * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is + * prepended to arguments from the bootloader or DT so we'll copy them + * to the start of boot_command_line here. Otherwise, empty + * boot_command_line to undo anything early_init_dt_scan_chosen() did. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + else + boot_command_line[0] = 0; + +#ifdef CONFIG_OF_EARLY_FLATTREE + /* + * If we're configured to take boot arguments from DT, look for those + * now. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) || + IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)) + of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); +#endif + + /* + * If we didn't get any arguments from DT (regardless of whether that's + * because we weren't configured to look for them, or because we looked + * & found none) then we'll take arguments from the bootloader. + * plat_mem_setup() should have filled arcs_cmdline with arguments from + * the bootloader. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) + bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); + + /* + * If the user specified a built-in command line & we didn't already + * prepend it, we append it to boot_command_line here. + */ + if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && + !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) + bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); +} + +/* + * arch_mem_init - initialize memory management subsystem + * + * o plat_mem_setup() detects the memory configuration and will record detected + * memory areas using memblock_add. + * + * At this stage the memory configuration of the system is known to the + * kernel but generic memory management system is still entirely uninitialized. + * + * o bootmem_init() + * o sparse_init() + * o paging_init() + * o dma_contiguous_reserve() + * + * At this stage the bootmem allocator is ready to use. + * + * NOTE: historically plat_mem_setup did the entire platform initialization. + * This was rather impractical because it meant plat_mem_setup had to + * get away without any kind of memory allocator. To keep old code from + * breaking plat_setup was just renamed to plat_mem_setup and a second platform + * initialization hook for anything else was introduced. + */ +static void __init arch_mem_init(char **cmdline_p) +{ + /* call board setup routine */ + plat_mem_setup(); + memblock_set_bottom_up(true); + + bootcmdline_init(); + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; + + parse_early_param(); + + if (usermem) + pr_info("User-defined physical RAM map overwrite\n"); + + check_kernel_sections_mem(); + + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + +#ifndef CONFIG_NUMA + memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0); +#endif + bootmem_init(); + + /* + * Prevent memblock from allocating high memory. + * This cannot be done before max_low_pfn is detected, so up + * to this point is possible to only reserve physical memory + * with memblock_reserve; memblock_alloc* can be used + * only after this point + */ + memblock_set_current_limit(PFN_PHYS(max_low_pfn)); + +#ifdef CONFIG_PROC_VMCORE + if (setup_elfcorehdr && setup_elfcorehdr_size) { + printk(KERN_INFO "kdump reserved memory at %lx-%lx\n", + setup_elfcorehdr, setup_elfcorehdr_size); + memblock_reserve(setup_elfcorehdr, setup_elfcorehdr_size); + } +#endif + + mips_parse_crashkernel(); +#ifdef CONFIG_KEXEC + if (crashk_res.start != crashk_res.end) + memblock_reserve(crashk_res.start, resource_size(&crashk_res)); +#endif + device_tree_init(); + + /* + * In order to reduce the possibility of kernel panic when failed to + * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate + * low memory as small as possible before plat_swiotlb_setup(), so + * make sparse_init() using top-down allocation. + */ + memblock_set_bottom_up(false); + sparse_init(); + memblock_set_bottom_up(true); + + plat_swiotlb_setup(); + + dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); + + /* Reserve for hibernation. */ + memblock_reserve(__pa_symbol(&__nosave_begin), + __pa_symbol(&__nosave_end) - __pa_symbol(&__nosave_begin)); + + fdt_init_reserved_mem(); + + memblock_dump_all(); + + early_memtest(PFN_PHYS(ARCH_PFN_OFFSET), PFN_PHYS(max_low_pfn)); +} + +static void __init resource_init(void) +{ + phys_addr_t start, end; + u64 i; + + if (UNCAC_BASE != IO_BASE) + return; + + code_resource.start = __pa_symbol(&_text); + code_resource.end = __pa_symbol(&_etext) - 1; + data_resource.start = __pa_symbol(&_etext); + data_resource.end = __pa_symbol(&_edata) - 1; + bss_resource.start = __pa_symbol(&__bss_start); + bss_resource.end = __pa_symbol(&__bss_stop) - 1; + + for_each_mem_range(i, &start, &end) { + struct resource *res; + + res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES); + if (!res) + panic("%s: Failed to allocate %zu bytes\n", __func__, + sizeof(struct resource)); + + res->start = start; + /* + * In memblock, end points to the first byte after the + * range while in resourses, end points to the last byte in + * the range. + */ + res->end = end - 1; + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; + res->name = "System RAM"; + + request_resource(&iomem_resource, res); + + /* + * We don't know which RAM region contains kernel data, + * so we try it repeatedly and let the resource manager + * test it. + */ + request_resource(res, &code_resource); + request_resource(res, &data_resource); + request_resource(res, &bss_resource); + request_crashkernel(res); + } +} + +#ifdef CONFIG_SMP +static void __init prefill_possible_map(void) +{ + int i, possible = num_possible_cpus(); + + if (possible > nr_cpu_ids) + possible = nr_cpu_ids; + + for (i = 0; i < possible; i++) + set_cpu_possible(i, true); + for (; i < NR_CPUS; i++) + set_cpu_possible(i, false); + + nr_cpu_ids = possible; +} +#else +static inline void prefill_possible_map(void) {} +#endif + +void __init setup_arch(char **cmdline_p) +{ + cpu_probe(); + mips_cm_probe(); + prom_init(); + + setup_early_fdc_console(); +#ifdef CONFIG_EARLY_PRINTK + setup_early_printk(); +#endif + cpu_report(); + check_bugs_early(); + +#if defined(CONFIG_VT) +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; +#endif +#endif + + arch_mem_init(cmdline_p); + dmi_setup(); + + resource_init(); + plat_smp_setup(); + prefill_possible_map(); + + cpu_cache_init(); + paging_init(); +} + +unsigned long kernelsp[NR_CPUS]; +unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; + +#ifdef CONFIG_USE_OF +unsigned long fw_passed_dtb; +#endif + +#ifdef CONFIG_DEBUG_FS +struct dentry *mips_debugfs_dir; +static int __init debugfs_mips(void) +{ + mips_debugfs_dir = debugfs_create_dir("mips", NULL); + return 0; +} +arch_initcall(debugfs_mips); +#endif + +#ifdef CONFIG_DMA_MAYBE_COHERENT +/* User defined DMA coherency from command line. */ +enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT; +EXPORT_SYMBOL_GPL(coherentio); +int hw_coherentio; /* Actual hardware supported DMA coherency setting. */ + +static int __init setcoherentio(char *str) +{ + coherentio = IO_COHERENCE_ENABLED; + pr_info("Hardware DMA cache coherency (command line)\n"); + return 0; +} +early_param("coherentio", setcoherentio); + +static int __init setnocoherentio(char *str) +{ + coherentio = IO_COHERENCE_DISABLED; + pr_info("Software DMA cache coherency (command line)\n"); + return 0; +} +early_param("nocoherentio", setnocoherentio); +#endif + +void __init arch_cpu_finalize_init(void) +{ + unsigned int cpu = smp_processor_id(); + + cpu_data[cpu].udelay_val = loops_per_jiffy; + check_bugs32(); + + if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + check_bugs64(); +} diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h new file mode 100644 index 000000000..f50d48435 --- /dev/null +++ b/arch/mips/kernel/signal-common.h @@ -0,0 +1,43 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ + +#ifndef __SIGNAL_COMMON_H +#define __SIGNAL_COMMON_H + +/* #define DEBUG_SIG */ + +#ifdef DEBUG_SIG +# define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args) +#else +# define DEBUGP(fmt, args...) +#endif + +/* + * Determine which stack to use.. + */ +extern void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, + size_t frame_size); +/* Check and clear pending FPU exceptions in saved CSR */ +extern int fpcsr_pending(unsigned int __user *fpcsr); + +/* Make sure we will not lose FPU ownership */ +#define lock_fpu_owner() ({ preempt_disable(); pagefault_disable(); }) +#define unlock_fpu_owner() ({ pagefault_enable(); preempt_enable(); }) + +/* Assembly functions to move context to/from the FPU */ +extern asmlinkage int +_save_fp_context(void __user *fpregs, void __user *csr); +extern asmlinkage int +_restore_fp_context(void __user *fpregs, void __user *csr); + +extern asmlinkage int _save_msa_all_upper(void __user *buf); +extern asmlinkage int _restore_msa_all_upper(void __user *buf); + +#endif /* __SIGNAL_COMMON_H */ diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c new file mode 100644 index 000000000..f1e985109 --- /dev/null +++ b/arch/mips/kernel/signal.c @@ -0,0 +1,962 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2014, Imagination Technologies Ltd. + */ +#include <linux/cache.h> +#include <linux/context_tracking.h> +#include <linux/irqflags.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/personality.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/uprobes.h> +#include <linux/compiler.h> +#include <linux/syscalls.h> +#include <linux/uaccess.h> +#include <linux/tracehook.h> + +#include <asm/abi.h> +#include <asm/asm.h> +#include <linux/bitops.h> +#include <asm/cacheflush.h> +#include <asm/fpu.h> +#include <asm/sim.h> +#include <asm/ucontext.h> +#include <asm/cpu-features.h> +#include <asm/war.h> +#include <asm/dsp.h> +#include <asm/inst.h> +#include <asm/msa.h> + +#include "signal-common.h" + +static int (*save_fp_context)(void __user *sc); +static int (*restore_fp_context)(void __user *sc); + +struct sigframe { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; /* Was: signal trampoline */ + + /* Matches struct ucontext from its uc_mcontext field onwards */ + struct sigcontext sf_sc; + sigset_t sf_mask; + unsigned long long sf_extcontext[]; +}; + +struct rt_sigframe { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_pad[2]; /* Was: signal trampoline */ + struct siginfo rs_info; + struct ucontext rs_uc; +}; + +#ifdef CONFIG_MIPS_FP_SUPPORT + +/* + * Thread saved context copy to/from a signal context presumed to be on the + * user stack, and therefore accessed with appropriate macros from uaccess.h. + */ +static int copy_fp_to_sigcontext(void __user *sc) +{ + struct mips_abi *abi = current->thread.abi; + uint64_t __user *fpregs = sc + abi->off_sc_fpregs; + uint32_t __user *csr = sc + abi->off_sc_fpc_csr; + int i; + int err = 0; + int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1; + + for (i = 0; i < NUM_FPU_REGS; i += inc) { + err |= + __put_user(get_fpr64(¤t->thread.fpu.fpr[i], 0), + &fpregs[i]); + } + err |= __put_user(current->thread.fpu.fcr31, csr); + + return err; +} + +static int copy_fp_from_sigcontext(void __user *sc) +{ + struct mips_abi *abi = current->thread.abi; + uint64_t __user *fpregs = sc + abi->off_sc_fpregs; + uint32_t __user *csr = sc + abi->off_sc_fpc_csr; + int i; + int err = 0; + int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1; + u64 fpr_val; + + for (i = 0; i < NUM_FPU_REGS; i += inc) { + err |= __get_user(fpr_val, &fpregs[i]); + set_fpr64(¤t->thread.fpu.fpr[i], 0, fpr_val); + } + err |= __get_user(current->thread.fpu.fcr31, csr); + + return err; +} + +#else /* !CONFIG_MIPS_FP_SUPPORT */ + +static int copy_fp_to_sigcontext(void __user *sc) +{ + return 0; +} + +static int copy_fp_from_sigcontext(void __user *sc) +{ + return 0; +} + +#endif /* !CONFIG_MIPS_FP_SUPPORT */ + +/* + * Wrappers for the assembly _{save,restore}_fp_context functions. + */ +static int save_hw_fp_context(void __user *sc) +{ + struct mips_abi *abi = current->thread.abi; + uint64_t __user *fpregs = sc + abi->off_sc_fpregs; + uint32_t __user *csr = sc + abi->off_sc_fpc_csr; + + return _save_fp_context(fpregs, csr); +} + +static int restore_hw_fp_context(void __user *sc) +{ + struct mips_abi *abi = current->thread.abi; + uint64_t __user *fpregs = sc + abi->off_sc_fpregs; + uint32_t __user *csr = sc + abi->off_sc_fpc_csr; + + return _restore_fp_context(fpregs, csr); +} + +/* + * Extended context handling. + */ + +static inline void __user *sc_to_extcontext(void __user *sc) +{ + struct ucontext __user *uc; + + /* + * We can just pretend the sigcontext is always embedded in a struct + * ucontext here, because the offset from sigcontext to extended + * context is the same in the struct sigframe case. + */ + uc = container_of(sc, struct ucontext, uc_mcontext); + return &uc->uc_extcontext; +} + +#ifdef CONFIG_CPU_HAS_MSA + +static int save_msa_extcontext(void __user *buf) +{ + struct msa_extcontext __user *msa = buf; + uint64_t val; + int i, err; + + if (!thread_msa_context_live()) + return 0; + + /* + * Ensure that we can't lose the live MSA context between checking + * for it & writing it to memory. + */ + preempt_disable(); + + if (is_msa_enabled()) { + /* + * There are no EVA versions of the vector register load/store + * instructions, so MSA context has to be saved to kernel memory + * and then copied to user memory. The save to kernel memory + * should already have been done when handling scalar FP + * context. + */ + BUG_ON(IS_ENABLED(CONFIG_EVA)); + + err = __put_user(read_msa_csr(), &msa->csr); + err |= _save_msa_all_upper(&msa->wr); + + preempt_enable(); + } else { + preempt_enable(); + + err = __put_user(current->thread.fpu.msacsr, &msa->csr); + + for (i = 0; i < NUM_FPU_REGS; i++) { + val = get_fpr64(¤t->thread.fpu.fpr[i], 1); + err |= __put_user(val, &msa->wr[i]); + } + } + + err |= __put_user(MSA_EXTCONTEXT_MAGIC, &msa->ext.magic); + err |= __put_user(sizeof(*msa), &msa->ext.size); + + return err ? -EFAULT : sizeof(*msa); +} + +static int restore_msa_extcontext(void __user *buf, unsigned int size) +{ + struct msa_extcontext __user *msa = buf; + unsigned long long val; + unsigned int csr; + int i, err; + + if (size != sizeof(*msa)) + return -EINVAL; + + err = get_user(csr, &msa->csr); + if (err) + return err; + + preempt_disable(); + + if (is_msa_enabled()) { + /* + * There are no EVA versions of the vector register load/store + * instructions, so MSA context has to be copied to kernel + * memory and later loaded to registers. The same is true of + * scalar FP context, so FPU & MSA should have already been + * disabled whilst handling scalar FP context. + */ + BUG_ON(IS_ENABLED(CONFIG_EVA)); + + write_msa_csr(csr); + err |= _restore_msa_all_upper(&msa->wr); + preempt_enable(); + } else { + preempt_enable(); + + current->thread.fpu.msacsr = csr; + + for (i = 0; i < NUM_FPU_REGS; i++) { + err |= __get_user(val, &msa->wr[i]); + set_fpr64(¤t->thread.fpu.fpr[i], 1, val); + } + } + + return err; +} + +#else /* !CONFIG_CPU_HAS_MSA */ + +static int save_msa_extcontext(void __user *buf) +{ + return 0; +} + +static int restore_msa_extcontext(void __user *buf, unsigned int size) +{ + return SIGSYS; +} + +#endif /* !CONFIG_CPU_HAS_MSA */ + +static int save_extcontext(void __user *buf) +{ + int sz; + + sz = save_msa_extcontext(buf); + if (sz < 0) + return sz; + buf += sz; + + /* If no context was saved then trivially return */ + if (!sz) + return 0; + + /* Write the end marker */ + if (__put_user(END_EXTCONTEXT_MAGIC, (u32 *)buf)) + return -EFAULT; + + sz += sizeof(((struct extcontext *)NULL)->magic); + return sz; +} + +static int restore_extcontext(void __user *buf) +{ + struct extcontext ext; + int err; + + while (1) { + err = __get_user(ext.magic, (unsigned int *)buf); + if (err) + return err; + + if (ext.magic == END_EXTCONTEXT_MAGIC) + return 0; + + err = __get_user(ext.size, (unsigned int *)(buf + + offsetof(struct extcontext, size))); + if (err) + return err; + + switch (ext.magic) { + case MSA_EXTCONTEXT_MAGIC: + err = restore_msa_extcontext(buf, ext.size); + break; + + default: + err = -EINVAL; + break; + } + + if (err) + return err; + + buf += ext.size; + } +} + +/* + * Helper routines + */ +int protected_save_fp_context(void __user *sc) +{ + struct mips_abi *abi = current->thread.abi; + uint64_t __user *fpregs = sc + abi->off_sc_fpregs; + uint32_t __user *csr = sc + abi->off_sc_fpc_csr; + uint32_t __user *used_math = sc + abi->off_sc_used_math; + unsigned int used, ext_sz; + int err; + + used = used_math() ? USED_FP : 0; + if (!used) + goto fp_done; + + if (!test_thread_flag(TIF_32BIT_FPREGS)) + used |= USED_FR1; + if (test_thread_flag(TIF_HYBRID_FPREGS)) + used |= USED_HYBRID_FPRS; + + /* + * EVA does not have userland equivalents of ldc1 or sdc1, so + * save to the kernel FP context & copy that to userland below. + */ + if (IS_ENABLED(CONFIG_EVA)) + lose_fpu(1); + + while (1) { + lock_fpu_owner(); + if (is_fpu_owner()) { + err = save_fp_context(sc); + unlock_fpu_owner(); + } else { + unlock_fpu_owner(); + err = copy_fp_to_sigcontext(sc); + } + if (likely(!err)) + break; + /* touch the sigcontext and try again */ + err = __put_user(0, &fpregs[0]) | + __put_user(0, &fpregs[31]) | + __put_user(0, csr); + if (err) + return err; /* really bad sigcontext */ + } + +fp_done: + ext_sz = err = save_extcontext(sc_to_extcontext(sc)); + if (err < 0) + return err; + used |= ext_sz ? USED_EXTCONTEXT : 0; + + return __put_user(used, used_math); +} + +int protected_restore_fp_context(void __user *sc) +{ + struct mips_abi *abi = current->thread.abi; + uint64_t __user *fpregs = sc + abi->off_sc_fpregs; + uint32_t __user *csr = sc + abi->off_sc_fpc_csr; + uint32_t __user *used_math = sc + abi->off_sc_used_math; + unsigned int used; + int err, sig = 0, tmp __maybe_unused; + + err = __get_user(used, used_math); + conditional_used_math(used & USED_FP); + + /* + * The signal handler may have used FPU; give it up if the program + * doesn't want it following sigreturn. + */ + if (err || !(used & USED_FP)) + lose_fpu(0); + if (err) + return err; + if (!(used & USED_FP)) + goto fp_done; + + err = sig = fpcsr_pending(csr); + if (err < 0) + return err; + + /* + * EVA does not have userland equivalents of ldc1 or sdc1, so we + * disable the FPU here such that the code below simply copies to + * the kernel FP context. + */ + if (IS_ENABLED(CONFIG_EVA)) + lose_fpu(0); + + while (1) { + lock_fpu_owner(); + if (is_fpu_owner()) { + err = restore_fp_context(sc); + unlock_fpu_owner(); + } else { + unlock_fpu_owner(); + err = copy_fp_from_sigcontext(sc); + } + if (likely(!err)) + break; + /* touch the sigcontext and try again */ + err = __get_user(tmp, &fpregs[0]) | + __get_user(tmp, &fpregs[31]) | + __get_user(tmp, csr); + if (err) + break; /* really bad sigcontext */ + } + +fp_done: + if (!err && (used & USED_EXTCONTEXT)) + err = restore_extcontext(sc_to_extcontext(sc)); + + return err ?: sig; +} + +int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + int i; + + err |= __put_user(regs->cp0_epc, &sc->sc_pc); + + err |= __put_user(0, &sc->sc_regs[0]); + for (i = 1; i < 32; i++) + err |= __put_user(regs->regs[i], &sc->sc_regs[i]); + +#ifdef CONFIG_CPU_HAS_SMARTMIPS + err |= __put_user(regs->acx, &sc->sc_acx); +#endif + err |= __put_user(regs->hi, &sc->sc_mdhi); + err |= __put_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __put_user(mfhi1(), &sc->sc_hi1); + err |= __put_user(mflo1(), &sc->sc_lo1); + err |= __put_user(mfhi2(), &sc->sc_hi2); + err |= __put_user(mflo2(), &sc->sc_lo2); + err |= __put_user(mfhi3(), &sc->sc_hi3); + err |= __put_user(mflo3(), &sc->sc_lo3); + err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); + } + + + /* + * Save FPU state to signal context. Signal handler + * will "inherit" current FPU state. + */ + err |= protected_save_fp_context(sc); + + return err; +} + +static size_t extcontext_max_size(void) +{ + size_t sz = 0; + + /* + * The assumption here is that between this point & the point at which + * the extended context is saved the size of the context should only + * ever be able to shrink (if the task is preempted), but never grow. + * That is, what this function returns is an upper bound on the size of + * the extended context for the current task at the current time. + */ + + if (thread_msa_context_live()) + sz += sizeof(struct msa_extcontext); + + /* If any context is saved then we'll append the end marker */ + if (sz) + sz += sizeof(((struct extcontext *)NULL)->magic); + + return sz; +} + +int fpcsr_pending(unsigned int __user *fpcsr) +{ + int err, sig = 0; + unsigned int csr, enabled; + + err = __get_user(csr, fpcsr); + enabled = FPU_CSR_UNI_X | ((csr & FPU_CSR_ALL_E) << 5); + /* + * If the signal handler set some FPU exceptions, clear it and + * send SIGFPE. + */ + if (csr & enabled) { + csr &= ~enabled; + err |= __put_user(csr, fpcsr); + sig = SIGFPE; + } + return err ?: sig; +} + +int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc) +{ + unsigned long treg; + int err = 0; + int i; + + /* Always make any pending restarted system calls return -EINTR */ + current->restart_block.fn = do_no_restart_syscall; + + err |= __get_user(regs->cp0_epc, &sc->sc_pc); + +#ifdef CONFIG_CPU_HAS_SMARTMIPS + err |= __get_user(regs->acx, &sc->sc_acx); +#endif + err |= __get_user(regs->hi, &sc->sc_mdhi); + err |= __get_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __get_user(treg, &sc->sc_hi1); mthi1(treg); + err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg); + err |= __get_user(treg, &sc->sc_hi2); mthi2(treg); + err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg); + err |= __get_user(treg, &sc->sc_hi3); mthi3(treg); + err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); + err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); + } + + for (i = 1; i < 32; i++) + err |= __get_user(regs->regs[i], &sc->sc_regs[i]); + + return err ?: protected_restore_fp_context(sc); +} + +#ifdef CONFIG_WAR_ICACHE_REFILLS +#define SIGMASK ~(cpu_icache_line_size()-1) +#else +#define SIGMASK ALMASK +#endif + +void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, + size_t frame_size) +{ + unsigned long sp; + + /* Leave space for potential extended context */ + frame_size += extcontext_max_size(); + + /* Default to using normal stack */ + sp = regs->regs[29]; + + /* + * FPU emulator may have it's own trampoline active just + * above the user stack, 16-bytes before the next lowest + * 16 byte boundary. Try to avoid trashing it. + */ + sp -= 32; + + sp = sigsp(sp, ksig); + + return (void __user *)((sp - frame_size) & SIGMASK); +} + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ + +#ifdef CONFIG_TRAD_SIGNALS +SYSCALL_DEFINE1(sigsuspend, sigset_t __user *, uset) +{ + return sys_rt_sigsuspend(uset, sizeof(sigset_t)); +} +#endif + +#ifdef CONFIG_TRAD_SIGNALS +SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + int err = 0; + + if (act) { + old_sigset_t mask; + + if (!access_ok(act, sizeof(*act))) + return -EFAULT; + err |= __get_user(new_ka.sa.sa_handler, &act->sa_handler); + err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); + err |= __get_user(mask, &act->sa_mask.sig[0]); + if (err) + return -EFAULT; + + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(oact, sizeof(*oact))) + return -EFAULT; + err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + err |= __put_user(old_ka.sa.sa_handler, &oact->sa_handler); + err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig); + err |= __put_user(0, &oact->sa_mask.sig[1]); + err |= __put_user(0, &oact->sa_mask.sig[2]); + err |= __put_user(0, &oact->sa_mask.sig[3]); + if (err) + return -EFAULT; + } + + return ret; +} +#endif + +#ifdef CONFIG_TRAD_SIGNALS +asmlinkage void sys_sigreturn(void) +{ + struct sigframe __user *frame; + struct pt_regs *regs; + sigset_t blocked; + int sig; + + regs = current_pt_regs(); + frame = (struct sigframe __user *)regs->regs[29]; + if (!access_ok(frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked))) + goto badframe; + + set_current_blocked(&blocked); + + sig = restore_sigcontext(regs, &frame->sf_sc); + if (sig < 0) + goto badframe; + else if (sig) + force_sig(sig); + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + "move\t$29, %0\n\t" + "j\tsyscall_exit" + : /* no outputs */ + : "r" (regs)); + /* Unreached */ + +badframe: + force_sig(SIGSEGV); +} +#endif /* CONFIG_TRAD_SIGNALS */ + +asmlinkage void sys_rt_sigreturn(void) +{ + struct rt_sigframe __user *frame; + struct pt_regs *regs; + sigset_t set; + int sig; + + regs = current_pt_regs(); + frame = (struct rt_sigframe __user *)regs->regs[29]; + if (!access_ok(frame, sizeof(*frame))) + goto badframe; + if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set))) + goto badframe; + + set_current_blocked(&set); + + sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext); + if (sig < 0) + goto badframe; + else if (sig) + force_sig(sig); + + if (restore_altstack(&frame->rs_uc.uc_stack)) + goto badframe; + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + "move\t$29, %0\n\t" + "j\tsyscall_exit" + : /* no outputs */ + : "r" (regs)); + /* Unreached */ + +badframe: + force_sig(SIGSEGV); +} + +#ifdef CONFIG_TRAD_SIGNALS +static int setup_frame(void *sig_return, struct ksignal *ksig, + struct pt_regs *regs, sigset_t *set) +{ + struct sigframe __user *frame; + int err = 0; + + frame = get_sigframe(ksig, regs, sizeof(*frame)); + if (!access_ok(frame, sizeof (*frame))) + return -EFAULT; + + err |= setup_sigcontext(regs, &frame->sf_sc); + err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set)); + if (err) + return -EFAULT; + + /* + * Arguments to signal handler: + * + * a0 = signal number + * a1 = 0 (should be cause) + * a2 = pointer to struct sigcontext + * + * $25 and c0_epc point to the signal handler, $29 points to the + * struct sigframe. + */ + regs->regs[ 4] = ksig->sig; + regs->regs[ 5] = 0; + regs->regs[ 6] = (unsigned long) &frame->sf_sc; + regs->regs[29] = (unsigned long) frame; + regs->regs[31] = (unsigned long) sig_return; + regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler; + + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", + current->comm, current->pid, + frame, regs->cp0_epc, regs->regs[31]); + return 0; +} +#endif + +static int setup_rt_frame(void *sig_return, struct ksignal *ksig, + struct pt_regs *regs, sigset_t *set) +{ + struct rt_sigframe __user *frame; + int err = 0; + + frame = get_sigframe(ksig, regs, sizeof(*frame)); + if (!access_ok(frame, sizeof (*frame))) + return -EFAULT; + + /* Create siginfo. */ + err |= copy_siginfo_to_user(&frame->rs_info, &ksig->info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->rs_uc.uc_flags); + err |= __put_user(NULL, &frame->rs_uc.uc_link); + err |= __save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]); + err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext); + err |= __copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)); + + if (err) + return -EFAULT; + + /* + * Arguments to signal handler: + * + * a0 = signal number + * a1 = 0 (should be cause) + * a2 = pointer to ucontext + * + * $25 and c0_epc point to the signal handler, $29 points to + * the struct rt_sigframe. + */ + regs->regs[ 4] = ksig->sig; + regs->regs[ 5] = (unsigned long) &frame->rs_info; + regs->regs[ 6] = (unsigned long) &frame->rs_uc; + regs->regs[29] = (unsigned long) frame; + regs->regs[31] = (unsigned long) sig_return; + regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler; + + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", + current->comm, current->pid, + frame, regs->cp0_epc, regs->regs[31]); + + return 0; +} + +struct mips_abi mips_abi = { +#ifdef CONFIG_TRAD_SIGNALS + .setup_frame = setup_frame, +#endif + .setup_rt_frame = setup_rt_frame, + .restart = __NR_restart_syscall, + + .off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs), + .off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr), + .off_sc_used_math = offsetof(struct sigcontext, sc_used_math), + + .vdso = &vdso_image, +}; + +static void handle_signal(struct ksignal *ksig, struct pt_regs *regs) +{ + sigset_t *oldset = sigmask_to_save(); + int ret; + struct mips_abi *abi = current->thread.abi; + void *vdso = current->mm->context.vdso; + + /* + * If we were emulating a delay slot instruction, exit that frame such + * that addresses in the sigframe are as expected for userland and we + * don't have a problem if we reuse the thread's frame for an + * instruction within the signal handler. + */ + dsemul_thread_rollback(regs); + + if (regs->regs[0]) { + switch(regs->regs[2]) { + case ERESTART_RESTARTBLOCK: + case ERESTARTNOHAND: + regs->regs[2] = EINTR; + break; + case ERESTARTSYS: + if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { + regs->regs[2] = EINTR; + break; + } + fallthrough; + case ERESTARTNOINTR: + regs->regs[7] = regs->regs[26]; + regs->regs[2] = regs->regs[0]; + regs->cp0_epc -= 4; + } + + regs->regs[0] = 0; /* Don't deal with this again. */ + } + + rseq_signal_deliver(ksig, regs); + + if (sig_uses_siginfo(&ksig->ka, abi)) + ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn, + ksig, regs, oldset); + else + ret = abi->setup_frame(vdso + abi->vdso->off_sigreturn, + ksig, regs, oldset); + + signal_setup_done(ret, ksig, 0); +} + +static void do_signal(struct pt_regs *regs) +{ + struct ksignal ksig; + + if (get_signal(&ksig)) { + /* Whee! Actually deliver the signal. */ + handle_signal(&ksig, regs); + return; + } + + if (regs->regs[0]) { + switch (regs->regs[2]) { + case ERESTARTNOHAND: + case ERESTARTSYS: + case ERESTARTNOINTR: + regs->regs[2] = regs->regs[0]; + regs->regs[7] = regs->regs[26]; + regs->cp0_epc -= 4; + break; + + case ERESTART_RESTARTBLOCK: + regs->regs[2] = current->thread.abi->restart; + regs->regs[7] = regs->regs[26]; + regs->cp0_epc -= 4; + break; + } + regs->regs[0] = 0; /* Don't deal with this again. */ + } + + /* + * If there's no signal to deliver, we just put the saved sigmask + * back + */ + restore_saved_sigmask(); +} + +/* + * notification of userspace execution resumption + * - triggered by the TIF_WORK_MASK flags + */ +asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused, + __u32 thread_info_flags) +{ + local_irq_enable(); + + user_exit(); + + if (thread_info_flags & _TIF_UPROBE) + uprobe_notify_resume(regs); + + /* deal with pending signal delivery */ + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL)) + do_signal(regs); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + tracehook_notify_resume(regs); + rseq_handle_notify_resume(NULL, regs); + } + + user_enter(); +} + +#if defined(CONFIG_SMP) && defined(CONFIG_MIPS_FP_SUPPORT) +static int smp_save_fp_context(void __user *sc) +{ + return raw_cpu_has_fpu + ? save_hw_fp_context(sc) + : copy_fp_to_sigcontext(sc); +} + +static int smp_restore_fp_context(void __user *sc) +{ + return raw_cpu_has_fpu + ? restore_hw_fp_context(sc) + : copy_fp_from_sigcontext(sc); +} +#endif + +static int signal_setup(void) +{ + /* + * The offset from sigcontext to extended context should be the same + * regardless of the type of signal, such that userland can always know + * where to look if it wishes to find the extended context structures. + */ + BUILD_BUG_ON((offsetof(struct sigframe, sf_extcontext) - + offsetof(struct sigframe, sf_sc)) != + (offsetof(struct rt_sigframe, rs_uc.uc_extcontext) - + offsetof(struct rt_sigframe, rs_uc.uc_mcontext))); + +#if defined(CONFIG_SMP) && defined(CONFIG_MIPS_FP_SUPPORT) + /* For now just do the cpu_has_fpu check when the functions are invoked */ + save_fp_context = smp_save_fp_context; + restore_fp_context = smp_restore_fp_context; +#else + if (cpu_has_fpu) { + save_fp_context = save_hw_fp_context; + restore_fp_context = restore_hw_fp_context; + } else { + save_fp_context = copy_fp_to_sigcontext; + restore_fp_context = copy_fp_from_sigcontext; + } +#endif /* CONFIG_SMP */ + + return 0; +} + +arch_initcall(signal_setup); diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c new file mode 100644 index 000000000..59b896543 --- /dev/null +++ b/arch/mips/kernel/signal32.c @@ -0,0 +1,78 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1994 - 2000, 2006 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2016, Imagination Technologies Ltd. + */ +#include <linux/compat.h> +#include <linux/compiler.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/syscalls.h> + +#include <asm/compat-signal.h> +#include <linux/uaccess.h> +#include <asm/unistd.h> + +#include "signal-common.h" + +/* 32-bit compatibility types */ + +typedef unsigned int __sighandler32_t; +typedef void (*vfptr_t)(void); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ + +asmlinkage int sys32_sigsuspend(compat_sigset_t __user *uset) +{ + return compat_sys_rt_sigsuspend(uset, sizeof(compat_sigset_t)); +} + +SYSCALL_DEFINE3(32_sigaction, long, sig, const struct compat_sigaction __user *, act, + struct compat_sigaction __user *, oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + int err = 0; + + if (act) { + old_sigset_t mask; + s32 handler; + + if (!access_ok(act, sizeof(*act))) + return -EFAULT; + err |= __get_user(handler, &act->sa_handler); + new_ka.sa.sa_handler = (void __user *)(s64)handler; + err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); + err |= __get_user(mask, &act->sa_mask.sig[0]); + if (err) + return -EFAULT; + + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(oact, sizeof(*oact))) + return -EFAULT; + err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + err |= __put_user((u32)(u64)old_ka.sa.sa_handler, + &oact->sa_handler); + err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig); + err |= __put_user(0, &oact->sa_mask.sig[1]); + err |= __put_user(0, &oact->sa_mask.sig[2]); + err |= __put_user(0, &oact->sa_mask.sig[3]); + if (err) + return -EFAULT; + } + + return ret; +} diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c new file mode 100644 index 000000000..7bd00fad6 --- /dev/null +++ b/arch/mips/kernel/signal_n32.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2003 Broadcom Corporation + */ +#include <linux/cache.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/compat.h> +#include <linux/bitops.h> + +#include <asm/abi.h> +#include <asm/asm.h> +#include <asm/cacheflush.h> +#include <asm/compat-signal.h> +#include <asm/sim.h> +#include <linux/uaccess.h> +#include <asm/ucontext.h> +#include <asm/fpu.h> +#include <asm/cpu-features.h> +#include <asm/war.h> + +#include "signal-common.h" + +/* + * Including <asm/unistd.h> would give use the 64-bit syscall numbers ... + */ +#define __NR_N32_restart_syscall 6214 + +extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *); +extern int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); + +struct ucontextn32 { + u32 uc_flags; + s32 uc_link; + compat_stack_t uc_stack; + struct sigcontext uc_mcontext; + compat_sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +struct rt_sigframe_n32 { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_pad[2]; /* Was: signal trampoline */ + struct compat_siginfo rs_info; + struct ucontextn32 rs_uc; +}; + +asmlinkage void sysn32_rt_sigreturn(void) +{ + struct rt_sigframe_n32 __user *frame; + struct pt_regs *regs; + sigset_t set; + int sig; + + regs = current_pt_regs(); + frame = (struct rt_sigframe_n32 __user *)regs->regs[29]; + if (!access_ok(frame, sizeof(*frame))) + goto badframe; + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) + goto badframe; + + set_current_blocked(&set); + + sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext); + if (sig < 0) + goto badframe; + else if (sig) + force_sig(sig); + + if (compat_restore_altstack(&frame->rs_uc.uc_stack)) + goto badframe; + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + "move\t$29, %0\n\t" + "j\tsyscall_exit" + : /* no outputs */ + : "r" (regs)); + /* Unreached */ + +badframe: + force_sig(SIGSEGV); +} + +static int setup_rt_frame_n32(void *sig_return, struct ksignal *ksig, + struct pt_regs *regs, sigset_t *set) +{ + struct rt_sigframe_n32 __user *frame; + int err = 0; + + frame = get_sigframe(ksig, regs, sizeof(*frame)); + if (!access_ok(frame, sizeof (*frame))) + return -EFAULT; + + /* Create siginfo. */ + err |= copy_siginfo_to_user32(&frame->rs_info, &ksig->info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->rs_uc.uc_flags); + err |= __put_user(0, &frame->rs_uc.uc_link); + err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]); + err |= setup_sigcontext(regs, &frame->rs_uc.uc_mcontext); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); + + if (err) + return -EFAULT; + + /* + * Arguments to signal handler: + * + * a0 = signal number + * a1 = 0 (should be cause) + * a2 = pointer to ucontext + * + * $25 and c0_epc point to the signal handler, $29 points to + * the struct rt_sigframe. + */ + regs->regs[ 4] = ksig->sig; + regs->regs[ 5] = (unsigned long) &frame->rs_info; + regs->regs[ 6] = (unsigned long) &frame->rs_uc; + regs->regs[29] = (unsigned long) frame; + regs->regs[31] = (unsigned long) sig_return; + regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler; + + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", + current->comm, current->pid, + frame, regs->cp0_epc, regs->regs[31]); + + return 0; +} + +struct mips_abi mips_abi_n32 = { + .setup_rt_frame = setup_rt_frame_n32, + .restart = __NR_N32_restart_syscall, + + .off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs), + .off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr), + .off_sc_used_math = offsetof(struct sigcontext, sc_used_math), + + .vdso = &vdso_image_n32, +}; diff --git a/arch/mips/kernel/signal_o32.c b/arch/mips/kernel/signal_o32.c new file mode 100644 index 000000000..299a7a28c --- /dev/null +++ b/arch/mips/kernel/signal_o32.c @@ -0,0 +1,290 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1994 - 2000, 2006 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2016, Imagination Technologies Ltd. + */ +#include <linux/compiler.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched/signal.h> +#include <linux/uaccess.h> + +#include <asm/abi.h> +#include <asm/compat-signal.h> +#include <asm/dsp.h> +#include <asm/sim.h> +#include <asm/unistd.h> + +#include "signal-common.h" + +/* + * Including <asm/unistd.h> would give use the 64-bit syscall numbers ... + */ +#define __NR_O32_restart_syscall 4253 + +struct sigframe32 { + u32 sf_ass[4]; /* argument save space for o32 */ + u32 sf_pad[2]; /* Was: signal trampoline */ + struct sigcontext32 sf_sc; + compat_sigset_t sf_mask; +}; + +struct ucontext32 { + u32 uc_flags; + s32 uc_link; + compat_stack_t uc_stack; + struct sigcontext32 uc_mcontext; + compat_sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +struct rt_sigframe32 { + u32 rs_ass[4]; /* argument save space for o32 */ + u32 rs_pad[2]; /* Was: signal trampoline */ + compat_siginfo_t rs_info; + struct ucontext32 rs_uc; +}; + +static int setup_sigcontext32(struct pt_regs *regs, + struct sigcontext32 __user *sc) +{ + int err = 0; + int i; + + err |= __put_user(regs->cp0_epc, &sc->sc_pc); + + err |= __put_user(0, &sc->sc_regs[0]); + for (i = 1; i < 32; i++) + err |= __put_user(regs->regs[i], &sc->sc_regs[i]); + + err |= __put_user(regs->hi, &sc->sc_mdhi); + err |= __put_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp); + err |= __put_user(mfhi1(), &sc->sc_hi1); + err |= __put_user(mflo1(), &sc->sc_lo1); + err |= __put_user(mfhi2(), &sc->sc_hi2); + err |= __put_user(mflo2(), &sc->sc_lo2); + err |= __put_user(mfhi3(), &sc->sc_hi3); + err |= __put_user(mflo3(), &sc->sc_lo3); + } + + /* + * Save FPU state to signal context. Signal handler + * will "inherit" current FPU state. + */ + err |= protected_save_fp_context(sc); + + return err; +} + +static int restore_sigcontext32(struct pt_regs *regs, + struct sigcontext32 __user *sc) +{ + int err = 0; + s32 treg; + int i; + + /* Always make any pending restarted system calls return -EINTR */ + current->restart_block.fn = do_no_restart_syscall; + + err |= __get_user(regs->cp0_epc, &sc->sc_pc); + err |= __get_user(regs->hi, &sc->sc_mdhi); + err |= __get_user(regs->lo, &sc->sc_mdlo); + if (cpu_has_dsp) { + err |= __get_user(treg, &sc->sc_hi1); mthi1(treg); + err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg); + err |= __get_user(treg, &sc->sc_hi2); mthi2(treg); + err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg); + err |= __get_user(treg, &sc->sc_hi3); mthi3(treg); + err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg); + err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK); + } + + for (i = 1; i < 32; i++) + err |= __get_user(regs->regs[i], &sc->sc_regs[i]); + + return err ?: protected_restore_fp_context(sc); +} + +static int setup_frame_32(void *sig_return, struct ksignal *ksig, + struct pt_regs *regs, sigset_t *set) +{ + struct sigframe32 __user *frame; + int err = 0; + + frame = get_sigframe(ksig, regs, sizeof(*frame)); + if (!access_ok(frame, sizeof (*frame))) + return -EFAULT; + + err |= setup_sigcontext32(regs, &frame->sf_sc); + err |= __copy_conv_sigset_to_user(&frame->sf_mask, set); + + if (err) + return -EFAULT; + + /* + * Arguments to signal handler: + * + * a0 = signal number + * a1 = 0 (should be cause) + * a2 = pointer to struct sigcontext + * + * $25 and c0_epc point to the signal handler, $29 points to the + * struct sigframe. + */ + regs->regs[ 4] = ksig->sig; + regs->regs[ 5] = 0; + regs->regs[ 6] = (unsigned long) &frame->sf_sc; + regs->regs[29] = (unsigned long) frame; + regs->regs[31] = (unsigned long) sig_return; + regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler; + + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", + current->comm, current->pid, + frame, regs->cp0_epc, regs->regs[31]); + + return 0; +} + +asmlinkage void sys32_rt_sigreturn(void) +{ + struct rt_sigframe32 __user *frame; + struct pt_regs *regs; + sigset_t set; + int sig; + + regs = current_pt_regs(); + frame = (struct rt_sigframe32 __user *)regs->regs[29]; + if (!access_ok(frame, sizeof(*frame))) + goto badframe; + if (__copy_conv_sigset_from_user(&set, &frame->rs_uc.uc_sigmask)) + goto badframe; + + set_current_blocked(&set); + + sig = restore_sigcontext32(regs, &frame->rs_uc.uc_mcontext); + if (sig < 0) + goto badframe; + else if (sig) + force_sig(sig); + + if (compat_restore_altstack(&frame->rs_uc.uc_stack)) + goto badframe; + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + "move\t$29, %0\n\t" + "j\tsyscall_exit" + : /* no outputs */ + : "r" (regs)); + /* Unreached */ + +badframe: + force_sig(SIGSEGV); +} + +static int setup_rt_frame_32(void *sig_return, struct ksignal *ksig, + struct pt_regs *regs, sigset_t *set) +{ + struct rt_sigframe32 __user *frame; + int err = 0; + + frame = get_sigframe(ksig, regs, sizeof(*frame)); + if (!access_ok(frame, sizeof (*frame))) + return -EFAULT; + + /* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */ + err |= copy_siginfo_to_user32(&frame->rs_info, &ksig->info); + + /* Create the ucontext. */ + err |= __put_user(0, &frame->rs_uc.uc_flags); + err |= __put_user(0, &frame->rs_uc.uc_link); + err |= __compat_save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]); + err |= setup_sigcontext32(regs, &frame->rs_uc.uc_mcontext); + err |= __copy_conv_sigset_to_user(&frame->rs_uc.uc_sigmask, set); + + if (err) + return -EFAULT; + + /* + * Arguments to signal handler: + * + * a0 = signal number + * a1 = 0 (should be cause) + * a2 = pointer to ucontext + * + * $25 and c0_epc point to the signal handler, $29 points to + * the struct rt_sigframe32. + */ + regs->regs[ 4] = ksig->sig; + regs->regs[ 5] = (unsigned long) &frame->rs_info; + regs->regs[ 6] = (unsigned long) &frame->rs_uc; + regs->regs[29] = (unsigned long) frame; + regs->regs[31] = (unsigned long) sig_return; + regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler; + + DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n", + current->comm, current->pid, + frame, regs->cp0_epc, regs->regs[31]); + + return 0; +} + +/* + * o32 compatibility on 64-bit kernels, without DSP ASE + */ +struct mips_abi mips_abi_32 = { + .setup_frame = setup_frame_32, + .setup_rt_frame = setup_rt_frame_32, + .restart = __NR_O32_restart_syscall, + + .off_sc_fpregs = offsetof(struct sigcontext32, sc_fpregs), + .off_sc_fpc_csr = offsetof(struct sigcontext32, sc_fpc_csr), + .off_sc_used_math = offsetof(struct sigcontext32, sc_used_math), + + .vdso = &vdso_image_o32, +}; + + +asmlinkage void sys32_sigreturn(void) +{ + struct sigframe32 __user *frame; + struct pt_regs *regs; + sigset_t blocked; + int sig; + + regs = current_pt_regs(); + frame = (struct sigframe32 __user *)regs->regs[29]; + if (!access_ok(frame, sizeof(*frame))) + goto badframe; + if (__copy_conv_sigset_from_user(&blocked, &frame->sf_mask)) + goto badframe; + + set_current_blocked(&blocked); + + sig = restore_sigcontext32(regs, &frame->sf_sc); + if (sig < 0) + goto badframe; + else if (sig) + force_sig(sig); + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + "move\t$29, %0\n\t" + "j\tsyscall_exit" + : /* no outputs */ + : "r" (regs)); + /* Unreached */ + +badframe: + force_sig(SIGSEGV); +} diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c new file mode 100644 index 000000000..1dbfb5aad --- /dev/null +++ b/arch/mips/kernel/smp-bmips.c @@ -0,0 +1,667 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) + * + * SMP support for BMIPS + */ + +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/sched/hotplug.h> +#include <linux/sched/task_stack.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/reboot.h> +#include <linux/io.h> +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/bug.h> +#include <linux/kernel.h> +#include <linux/kexec.h> + +#include <asm/time.h> +#include <asm/processor.h> +#include <asm/bootinfo.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/mipsregs.h> +#include <asm/bmips.h> +#include <asm/traps.h> +#include <asm/barrier.h> +#include <asm/cpu-features.h> + +static int __maybe_unused max_cpus = 1; + +/* these may be configured by the platform code */ +int bmips_smp_enabled = 1; +int bmips_cpu_offset; +cpumask_t bmips_booted_mask; +unsigned long bmips_tp1_irqs = IE_IRQ1; + +#define RESET_FROM_KSEG0 0x80080800 +#define RESET_FROM_KSEG1 0xa0080800 + +static void bmips_set_reset_vec(int cpu, u32 val); + +#ifdef CONFIG_SMP + +/* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */ +unsigned long bmips_smp_boot_sp; +unsigned long bmips_smp_boot_gp; + +static void bmips43xx_send_ipi_single(int cpu, unsigned int action); +static void bmips5000_send_ipi_single(int cpu, unsigned int action); +static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id); +static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id); + +/* SW interrupts 0,1 are used for interprocessor signaling */ +#define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0) +#define IPI1_IRQ (MIPS_CPU_IRQ_BASE + 1) + +#define CPUNUM(cpu, shift) (((cpu) + bmips_cpu_offset) << (shift)) +#define ACTION_CLR_IPI(cpu, ipi) (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8)) +#define ACTION_SET_IPI(cpu, ipi) (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8)) +#define ACTION_BOOT_THREAD(cpu) (0x08 | CPUNUM(cpu, 0)) + +static void __init bmips_smp_setup(void) +{ + int i, cpu = 1, boot_cpu = 0; + int cpu_hw_intr; + + switch (current_cpu_type()) { + case CPU_BMIPS4350: + case CPU_BMIPS4380: + /* arbitration priority */ + clear_c0_brcm_cmt_ctrl(0x30); + + /* NBK and weak order flags */ + set_c0_brcm_config_0(0x30000); + + /* Find out if we are running on TP0 or TP1 */ + boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); + + /* + * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other + * thread + * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output + * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output + */ + if (boot_cpu == 0) + cpu_hw_intr = 0x02; + else + cpu_hw_intr = 0x1d; + + change_c0_brcm_cmt_intr(0xf8018000, + (cpu_hw_intr << 27) | (0x03 << 15)); + + /* single core, 2 threads (2 pipelines) */ + max_cpus = 2; + + break; + case CPU_BMIPS5000: + /* enable raceless SW interrupts */ + set_c0_brcm_config(0x03 << 22); + + /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */ + change_c0_brcm_mode(0x1f << 27, 0x02 << 27); + + /* N cores, 2 threads per core */ + max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; + + /* clear any pending SW interrupts */ + for (i = 0; i < max_cpus; i++) { + write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); + write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); + } + + break; + default: + max_cpus = 1; + } + + if (!bmips_smp_enabled) + max_cpus = 1; + + /* this can be overridden by the BSP */ + if (!board_ebase_setup) + board_ebase_setup = &bmips_ebase_setup; + + __cpu_number_map[boot_cpu] = 0; + __cpu_logical_map[0] = boot_cpu; + + for (i = 0; i < max_cpus; i++) { + if (i != boot_cpu) { + __cpu_number_map[i] = cpu; + __cpu_logical_map[cpu] = i; + cpu++; + } + set_cpu_possible(i, 1); + set_cpu_present(i, 1); + } +} + +/* + * IPI IRQ setup - runs on CPU0 + */ +static void bmips_prepare_cpus(unsigned int max_cpus) +{ + irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id); + + switch (current_cpu_type()) { + case CPU_BMIPS4350: + case CPU_BMIPS4380: + bmips_ipi_interrupt = bmips43xx_ipi_interrupt; + break; + case CPU_BMIPS5000: + bmips_ipi_interrupt = bmips5000_ipi_interrupt; + break; + default: + return; + } + + if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, + IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL)) + panic("Can't request IPI0 interrupt"); + if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, + IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL)) + panic("Can't request IPI1 interrupt"); +} + +/* + * Tell the hardware to boot CPUx - runs on CPU0 + */ +static int bmips_boot_secondary(int cpu, struct task_struct *idle) +{ + bmips_smp_boot_sp = __KSTK_TOS(idle); + bmips_smp_boot_gp = (unsigned long)task_thread_info(idle); + mb(); + + /* + * Initial boot sequence for secondary CPU: + * bmips_reset_nmi_vec @ a000_0000 -> + * bmips_smp_entry -> + * plat_wired_tlb_setup (cached function call; optional) -> + * start_secondary (cached jump) + * + * Warm restart sequence: + * play_dead WAIT loop -> + * bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC -> + * eret to play_dead -> + * bmips_secondary_reentry -> + * start_secondary + */ + + pr_info("SMP: Booting CPU%d...\n", cpu); + + if (cpumask_test_cpu(cpu, &bmips_booted_mask)) { + /* kseg1 might not exist if this CPU enabled XKS01 */ + bmips_set_reset_vec(cpu, RESET_FROM_KSEG0); + + switch (current_cpu_type()) { + case CPU_BMIPS4350: + case CPU_BMIPS4380: + bmips43xx_send_ipi_single(cpu, 0); + break; + case CPU_BMIPS5000: + bmips5000_send_ipi_single(cpu, 0); + break; + } + } else { + bmips_set_reset_vec(cpu, RESET_FROM_KSEG1); + + switch (current_cpu_type()) { + case CPU_BMIPS4350: + case CPU_BMIPS4380: + /* Reset slave TP1 if booting from TP0 */ + if (cpu_logical_map(cpu) == 1) + set_c0_brcm_cmt_ctrl(0x01); + break; + case CPU_BMIPS5000: + write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); + break; + } + cpumask_set_cpu(cpu, &bmips_booted_mask); + } + + return 0; +} + +/* + * Early setup - runs on secondary CPU after cache probe + */ +static void bmips_init_secondary(void) +{ + bmips_cpu_setup(); + + switch (current_cpu_type()) { + case CPU_BMIPS4350: + case CPU_BMIPS4380: + clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); + break; + case CPU_BMIPS5000: + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); + cpu_set_core(¤t_cpu_data, (read_c0_brcm_config() >> 25) & 3); + break; + } +} + +/* + * Late setup - runs on secondary CPU before entering the idle loop + */ +static void bmips_smp_finish(void) +{ + pr_info("SMP: CPU%d is running\n", smp_processor_id()); + + /* make sure there won't be a timer interrupt for a little while */ + write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + + irq_enable_hazard(); + set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE); + irq_enable_hazard(); +} + +/* + * BMIPS5000 raceless IPIs + * + * Each CPU has two inbound SW IRQs which are independent of all other CPUs. + * IPI0 is used for SMP_RESCHEDULE_YOURSELF + * IPI1 is used for SMP_CALL_FUNCTION + */ + +static void bmips5000_send_ipi_single(int cpu, unsigned int action) +{ + write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION)); +} + +static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id) +{ + int action = irq - IPI0_IRQ; + + write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action)); + + if (action == 0) + scheduler_ipi(); + else + generic_smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static void bmips5000_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + bmips5000_send_ipi_single(i, action); +} + +/* + * BMIPS43xx racey IPIs + * + * We use one inbound SW IRQ for each CPU. + * + * A spinlock must be held in order to keep CPUx from accidentally clearing + * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy. The + * same spinlock is used to protect the action masks. + */ + +static DEFINE_SPINLOCK(ipi_lock); +static DEFINE_PER_CPU(int, ipi_action_mask); + +static void bmips43xx_send_ipi_single(int cpu, unsigned int action) +{ + unsigned long flags; + + spin_lock_irqsave(&ipi_lock, flags); + set_c0_cause(cpu ? C_SW1 : C_SW0); + per_cpu(ipi_action_mask, cpu) |= action; + irq_enable_hazard(); + spin_unlock_irqrestore(&ipi_lock, flags); +} + +static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id) +{ + unsigned long flags; + int action, cpu = irq - IPI0_IRQ; + + spin_lock_irqsave(&ipi_lock, flags); + action = __this_cpu_read(ipi_action_mask); + per_cpu(ipi_action_mask, cpu) = 0; + clear_c0_cause(cpu ? C_SW1 : C_SW0); + spin_unlock_irqrestore(&ipi_lock, flags); + + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); + if (action & SMP_CALL_FUNCTION) + generic_smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static void bmips43xx_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + unsigned int i; + + for_each_cpu(i, mask) + bmips43xx_send_ipi_single(i, action); +} + +#ifdef CONFIG_HOTPLUG_CPU + +static int bmips_cpu_disable(void) +{ + unsigned int cpu = smp_processor_id(); + + if (cpu == 0) + return -EBUSY; + + pr_info("SMP: CPU%d is offline\n", cpu); + + set_cpu_online(cpu, false); + calculate_cpu_foreign_map(); + irq_cpu_offline(); + clear_c0_status(IE_IRQ5); + + local_flush_tlb_all(); + local_flush_icache_range(0, ~0); + + return 0; +} + +static void bmips_cpu_die(unsigned int cpu) +{ +} + +void __ref play_dead(void) +{ + idle_task_exit(); + + /* flush data cache */ + _dma_cache_wback_inv(0, ~0); + + /* + * Wakeup is on SW0 or SW1; disable everything else + * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux + * IRQ handlers; this clears ST0_IE and returns immediately. + */ + clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1); + change_c0_status( + IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV, + IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV); + irq_disable_hazard(); + + /* + * wait for SW interrupt from bmips_boot_secondary(), then jump + * back to start_secondary() + */ + __asm__ __volatile__( + " wait\n" + " j bmips_secondary_reentry\n" + : : : "memory"); +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +const struct plat_smp_ops bmips43xx_smp_ops = { + .smp_setup = bmips_smp_setup, + .prepare_cpus = bmips_prepare_cpus, + .boot_secondary = bmips_boot_secondary, + .smp_finish = bmips_smp_finish, + .init_secondary = bmips_init_secondary, + .send_ipi_single = bmips43xx_send_ipi_single, + .send_ipi_mask = bmips43xx_send_ipi_mask, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = bmips_cpu_disable, + .cpu_die = bmips_cpu_die, +#endif +#ifdef CONFIG_KEXEC + .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, +#endif +}; + +const struct plat_smp_ops bmips5000_smp_ops = { + .smp_setup = bmips_smp_setup, + .prepare_cpus = bmips_prepare_cpus, + .boot_secondary = bmips_boot_secondary, + .smp_finish = bmips_smp_finish, + .init_secondary = bmips_init_secondary, + .send_ipi_single = bmips5000_send_ipi_single, + .send_ipi_mask = bmips5000_send_ipi_mask, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = bmips_cpu_disable, + .cpu_die = bmips_cpu_die, +#endif +#ifdef CONFIG_KEXEC + .kexec_nonboot_cpu = kexec_nonboot_cpu_jump, +#endif +}; + +#endif /* CONFIG_SMP */ + +/*********************************************************************** + * BMIPS vector relocation + * This is primarily used for SMP boot, but it is applicable to some + * UP BMIPS systems as well. + ***********************************************************************/ + +static void bmips_wr_vec(unsigned long dst, char *start, char *end) +{ + memcpy((void *)dst, start, end - start); + dma_cache_wback(dst, end - start); + local_flush_icache_range(dst, dst + (end - start)); + instruction_hazard(); +} + +static inline void bmips_nmi_handler_setup(void) +{ + bmips_wr_vec(BMIPS_NMI_RESET_VEC, bmips_reset_nmi_vec, + bmips_reset_nmi_vec_end); + bmips_wr_vec(BMIPS_WARM_RESTART_VEC, bmips_smp_int_vec, + bmips_smp_int_vec_end); +} + +struct reset_vec_info { + int cpu; + u32 val; +}; + +static void bmips_set_reset_vec_remote(void *vinfo) +{ + struct reset_vec_info *info = vinfo; + int shift = info->cpu & 0x01 ? 16 : 0; + u32 mask = ~(0xffff << shift), val = info->val >> 16; + + preempt_disable(); + if (smp_processor_id() > 0) { + smp_call_function_single(0, &bmips_set_reset_vec_remote, + info, 1); + } else { + if (info->cpu & 0x02) { + /* BMIPS5200 "should" use mask/shift, but it's buggy */ + bmips_write_zscm_reg(0xa0, (val << 16) | val); + bmips_read_zscm_reg(0xa0); + } else { + write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) | + (val << shift)); + } + } + preempt_enable(); +} + +static void bmips_set_reset_vec(int cpu, u32 val) +{ + struct reset_vec_info info; + + if (current_cpu_type() == CPU_BMIPS5000) { + /* this needs to run from CPU0 (which is always online) */ + info.cpu = cpu; + info.val = val; + bmips_set_reset_vec_remote(&info); + } else { + void __iomem *cbr = BMIPS_GET_CBR(); + + if (cpu == 0) + __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0); + else { + if (current_cpu_type() != CPU_BMIPS4380) + return; + __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1); + } + } + __sync(); + back_to_back_c0_hazard(); +} + +void bmips_ebase_setup(void) +{ + unsigned long new_ebase = ebase; + + BUG_ON(ebase != CKSEG0); + + switch (current_cpu_type()) { + case CPU_BMIPS4350: + /* + * BMIPS4350 cannot relocate the normal vectors, but it + * can relocate the BEV=1 vectors. So CPU1 starts up at + * the relocated BEV=1, IV=0 general exception vector @ + * 0xa000_0380. + * + * set_uncached_handler() is used here because: + * - CPU1 will run this from uncached space + * - None of the cacheflush functions are set up yet + */ + set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0, + &bmips_smp_int_vec, 0x80); + __sync(); + return; + case CPU_BMIPS3300: + case CPU_BMIPS4380: + /* + * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_0400: normal vectors + */ + new_ebase = 0x80000400; + bmips_set_reset_vec(0, RESET_FROM_KSEG0); + break; + case CPU_BMIPS5000: + /* + * 0x8000_0000: reset/NMI (initially in kseg1) + * 0x8000_1000: normal vectors + */ + new_ebase = 0x80001000; + bmips_set_reset_vec(0, RESET_FROM_KSEG0); + write_c0_ebase(new_ebase); + break; + default: + return; + } + + board_nmi_handler_setup = &bmips_nmi_handler_setup; + ebase = new_ebase; +} + +asmlinkage void __weak plat_wired_tlb_setup(void) +{ + /* + * Called when starting/restarting a secondary CPU. + * Kernel stacks and other important data might only be accessible + * once the wired entries are present. + */ +} + +void bmips_cpu_setup(void) +{ + void __iomem __maybe_unused *cbr = BMIPS_GET_CBR(); + u32 __maybe_unused cfg; + + switch (current_cpu_type()) { + case CPU_BMIPS3300: + /* Set BIU to async mode */ + set_c0_brcm_bus_pll(BIT(22)); + __sync(); + + /* put the BIU back in sync mode */ + clear_c0_brcm_bus_pll(BIT(22)); + + /* clear BHTD to enable branch history table */ + clear_c0_brcm_reset(BIT(16)); + + /* Flush and enable RAC */ + cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG); + __raw_readl(cbr + BMIPS_RAC_CONFIG); + + cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG); + __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG); + __raw_readl(cbr + BMIPS_RAC_CONFIG); + + cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE); + __raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE); + __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE); + break; + + case CPU_BMIPS4380: + /* CBG workaround for early BMIPS4380 CPUs */ + switch (read_c0_prid()) { + case 0x2a040: + case 0x2a042: + case 0x2a044: + case 0x2a060: + cfg = __raw_readl(cbr + BMIPS_L2_CONFIG); + __raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG); + __raw_readl(cbr + BMIPS_L2_CONFIG); + } + + /* clear BHTD to enable branch history table */ + clear_c0_brcm_config_0(BIT(21)); + + /* XI/ROTR enable */ + set_c0_brcm_config_0(BIT(23)); + set_c0_brcm_cmt_ctrl(BIT(15)); + break; + + case CPU_BMIPS5000: + /* enable RDHWR, BRDHWR */ + set_c0_brcm_config(BIT(17) | BIT(21)); + + /* Disable JTB */ + __asm__ __volatile__( + " .set noreorder\n" + " li $8, 0x5a455048\n" + " .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */ + " .word 0x4008b008\n" /* mfc0 t0, $22, 8 */ + " li $9, 0x00008000\n" + " or $8, $8, $9\n" + " .word 0x4088b008\n" /* mtc0 t0, $22, 8 */ + " sync\n" + " li $8, 0x0\n" + " .word 0x4088b00f\n" /* mtc0 t0, $22, 15 */ + " .set reorder\n" + : : : "$8", "$9"); + + /* XI enable */ + set_c0_brcm_config(BIT(27)); + + /* enable MIPS32R2 ROR instruction for XI TLB handlers */ + __asm__ __volatile__( + " li $8, 0x5a455048\n" + " .word 0x4088b00f\n" /* mtc0 $8, $22, 15 */ + " nop; nop; nop\n" + " .word 0x4008b008\n" /* mfc0 $8, $22, 8 */ + " lui $9, 0x0100\n" + " or $8, $9\n" + " .word 0x4088b008\n" /* mtc0 $8, $22, 8 */ + : : : "$8", "$9"); + break; + } +} diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c new file mode 100644 index 000000000..76f5824cd --- /dev/null +++ b/arch/mips/kernel/smp-cmp.c @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * Chris Dearman (chris@mips.com) + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/sched/task_stack.h> +#include <linux/smp.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/compiler.h> + +#include <linux/atomic.h> +#include <asm/cacheflush.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/smp.h> +#include <asm/time.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/mips_mt.h> +#include <asm/amon.h> + +static void cmp_init_secondary(void) +{ + struct cpuinfo_mips *c __maybe_unused = ¤t_cpu_data; + + /* Assume GIC is present */ + change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | + STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7); + + /* Enable per-cpu interrupts: platform specific */ + +#ifdef CONFIG_MIPS_MT_SMP + if (cpu_has_mipsmt) + cpu_set_vpe_id(c, (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & + TCBIND_CURVPE); +#endif +} + +static void cmp_smp_finish(void) +{ + pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__); + + /* CDFIXME: remove this? */ + write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ)); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + local_irq_enable(); +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it running + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + */ +static int cmp_boot_secondary(int cpu, struct task_struct *idle) +{ + struct thread_info *gp = task_thread_info(idle); + unsigned long sp = __KSTK_TOS(idle); + unsigned long pc = (unsigned long)&smp_bootstrap; + unsigned long a0 = 0; + + pr_debug("SMPCMP: CPU%d: %s cpu %d\n", smp_processor_id(), + __func__, cpu); + +#if 0 + /* Needed? */ + flush_icache_range((unsigned long)gp, + (unsigned long)(gp + sizeof(struct thread_info))); +#endif + + amon_cpu_start(cpu, pc, sp, (unsigned long)gp, a0); + return 0; +} + +/* + * Common setup before any secondaries are started + */ +void __init cmp_smp_setup(void) +{ + int i; + int ncpu = 0; + + pr_debug("SMPCMP: CPU%d: %s\n", smp_processor_id(), __func__); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpumask_set_cpu(0, &mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + for (i = 1; i < NR_CPUS; i++) { + if (amon_cpu_avail(i)) { + set_cpu_possible(i, true); + __cpu_number_map[i] = ++ncpu; + __cpu_logical_map[ncpu] = i; + } + } + + if (cpu_has_mipsmt) { + unsigned int nvpe = 1; +#ifdef CONFIG_MIPS_MT_SMP + unsigned int mvpconf0 = read_c0_mvpconf0(); + + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; +#endif + smp_num_siblings = nvpe; + } + pr_info("Detected %i available secondary CPU(s)\n", ncpu); +} + +void __init cmp_prepare_cpus(unsigned int max_cpus) +{ + pr_debug("SMPCMP: CPU%d: %s max_cpus=%d\n", + smp_processor_id(), __func__, max_cpus); + +#ifdef CONFIG_MIPS_MT + /* + * FIXME: some of these options are per-system, some per-core and + * some per-cpu + */ + mips_mt_set_cpuoptions(); +#endif + +} + +const struct plat_smp_ops cmp_smp_ops = { + .send_ipi_single = mips_smp_send_ipi_single, + .send_ipi_mask = mips_smp_send_ipi_mask, + .init_secondary = cmp_init_secondary, + .smp_finish = cmp_smp_finish, + .boot_secondary = cmp_boot_secondary, + .smp_setup = cmp_smp_setup, + .prepare_cpus = cmp_prepare_cpus, +}; diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c new file mode 100644 index 000000000..f659adb68 --- /dev/null +++ b/arch/mips/kernel/smp-cps.c @@ -0,0 +1,647 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2013 Imagination Technologies + * Author: Paul Burton <paul.burton@mips.com> + */ + +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/sched/task_stack.h> +#include <linux/sched/hotplug.h> +#include <linux/slab.h> +#include <linux/smp.h> +#include <linux/types.h> + +#include <asm/bcache.h> +#include <asm/mips-cps.h> +#include <asm/mips_mt.h> +#include <asm/mipsregs.h> +#include <asm/pm-cps.h> +#include <asm/r4kcache.h> +#include <asm/smp-cps.h> +#include <asm/time.h> +#include <asm/uasm.h> + +static bool threads_disabled; +static DECLARE_BITMAP(core_power, NR_CPUS); + +struct core_boot_config *mips_cps_core_bootcfg; + +static int __init setup_nothreads(char *s) +{ + threads_disabled = true; + return 0; +} +early_param("nothreads", setup_nothreads); + +static unsigned core_vpe_count(unsigned int cluster, unsigned core) +{ + if (threads_disabled) + return 1; + + return mips_cps_numvps(cluster, core); +} + +static void __init cps_smp_setup(void) +{ + unsigned int nclusters, ncores, nvpes, core_vpes; + unsigned long core_entry; + int cl, c, v; + + /* Detect & record VPE topology */ + nvpes = 0; + nclusters = mips_cps_numclusters(); + pr_info("%s topology ", cpu_has_mips_r6 ? "VP" : "VPE"); + for (cl = 0; cl < nclusters; cl++) { + if (cl > 0) + pr_cont(","); + pr_cont("{"); + + ncores = mips_cps_numcores(cl); + for (c = 0; c < ncores; c++) { + core_vpes = core_vpe_count(cl, c); + + if (c > 0) + pr_cont(","); + pr_cont("%u", core_vpes); + + /* Use the number of VPEs in cluster 0 core 0 for smp_num_siblings */ + if (!cl && !c) + smp_num_siblings = core_vpes; + + for (v = 0; v < min_t(int, core_vpes, NR_CPUS - nvpes); v++) { + cpu_set_cluster(&cpu_data[nvpes + v], cl); + cpu_set_core(&cpu_data[nvpes + v], c); + cpu_set_vpe_id(&cpu_data[nvpes + v], v); + } + + nvpes += core_vpes; + } + + pr_cont("}"); + } + pr_cont(" total %u\n", nvpes); + + /* Indicate present CPUs (CPU being synonymous with VPE) */ + for (v = 0; v < min_t(unsigned, nvpes, NR_CPUS); v++) { + set_cpu_possible(v, cpu_cluster(&cpu_data[v]) == 0); + set_cpu_present(v, cpu_cluster(&cpu_data[v]) == 0); + __cpu_number_map[v] = v; + __cpu_logical_map[v] = v; + } + + /* Set a coherent default CCA (CWB) */ + change_c0_config(CONF_CM_CMASK, 0x5); + + /* Core 0 is powered up (we're running on it) */ + bitmap_set(core_power, 0, 1); + + /* Initialise core 0 */ + mips_cps_core_init(); + + /* Make core 0 coherent with everything */ + write_gcr_cl_coherence(0xff); + + if (mips_cm_revision() >= CM_REV_CM3) { + core_entry = CKSEG1ADDR((unsigned long)mips_cps_core_entry); + write_gcr_bev_base(core_entry); + } + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpumask_set_cpu(0, &mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ +} + +static void __init cps_prepare_cpus(unsigned int max_cpus) +{ + unsigned ncores, core_vpes, c, cca; + bool cca_unsuitable, cores_limited; + u32 *entry_code; + + mips_mt_set_cpuoptions(); + + /* Detect whether the CCA is unsuited to multi-core SMP */ + cca = read_c0_config() & CONF_CM_CMASK; + switch (cca) { + case 0x4: /* CWBE */ + case 0x5: /* CWB */ + /* The CCA is coherent, multi-core is fine */ + cca_unsuitable = false; + break; + + default: + /* CCA is not coherent, multi-core is not usable */ + cca_unsuitable = true; + } + + /* Warn the user if the CCA prevents multi-core */ + cores_limited = false; + if (cca_unsuitable || cpu_has_dc_aliases) { + for_each_present_cpu(c) { + if (cpus_are_siblings(smp_processor_id(), c)) + continue; + + set_cpu_present(c, false); + cores_limited = true; + } + } + if (cores_limited) + pr_warn("Using only one core due to %s%s%s\n", + cca_unsuitable ? "unsuitable CCA" : "", + (cca_unsuitable && cpu_has_dc_aliases) ? " & " : "", + cpu_has_dc_aliases ? "dcache aliasing" : ""); + + /* + * Patch the start of mips_cps_core_entry to provide: + * + * s0 = kseg0 CCA + */ + entry_code = (u32 *)&mips_cps_core_entry; + uasm_i_addiu(&entry_code, 16, 0, cca); + blast_dcache_range((unsigned long)&mips_cps_core_entry, + (unsigned long)entry_code); + bc_wback_inv((unsigned long)&mips_cps_core_entry, + (void *)entry_code - (void *)&mips_cps_core_entry); + __sync(); + + /* Allocate core boot configuration structs */ + ncores = mips_cps_numcores(0); + mips_cps_core_bootcfg = kcalloc(ncores, sizeof(*mips_cps_core_bootcfg), + GFP_KERNEL); + if (!mips_cps_core_bootcfg) { + pr_err("Failed to allocate boot config for %u cores\n", ncores); + goto err_out; + } + + /* Allocate VPE boot configuration structs */ + for (c = 0; c < ncores; c++) { + core_vpes = core_vpe_count(0, c); + mips_cps_core_bootcfg[c].vpe_config = kcalloc(core_vpes, + sizeof(*mips_cps_core_bootcfg[c].vpe_config), + GFP_KERNEL); + if (!mips_cps_core_bootcfg[c].vpe_config) { + pr_err("Failed to allocate %u VPE boot configs\n", + core_vpes); + goto err_out; + } + } + + /* Mark this CPU as booted */ + atomic_set(&mips_cps_core_bootcfg[cpu_core(¤t_cpu_data)].vpe_mask, + 1 << cpu_vpe_id(¤t_cpu_data)); + + return; +err_out: + /* Clean up allocations */ + if (mips_cps_core_bootcfg) { + for (c = 0; c < ncores; c++) + kfree(mips_cps_core_bootcfg[c].vpe_config); + kfree(mips_cps_core_bootcfg); + mips_cps_core_bootcfg = NULL; + } + + /* Effectively disable SMP by declaring CPUs not present */ + for_each_possible_cpu(c) { + if (c == 0) + continue; + set_cpu_present(c, false); + } +} + +static void boot_core(unsigned int core, unsigned int vpe_id) +{ + u32 stat, seq_state; + unsigned timeout; + + /* Select the appropriate core */ + mips_cm_lock_other(0, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL); + + /* Set its reset vector */ + write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry)); + + /* Ensure its coherency is disabled */ + write_gcr_co_coherence(0); + + /* Start it with the legacy memory map and exception base */ + write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB); + + /* Ensure the core can access the GCRs */ + set_gcr_access(1 << core); + + if (mips_cpc_present()) { + /* Reset the core */ + mips_cpc_lock_other(core); + + if (mips_cm_revision() >= CM_REV_CM3) { + /* Run only the requested VP following the reset */ + write_cpc_co_vp_stop(0xf); + write_cpc_co_vp_run(1 << vpe_id); + + /* + * Ensure that the VP_RUN register is written before the + * core leaves reset. + */ + wmb(); + } + + write_cpc_co_cmd(CPC_Cx_CMD_RESET); + + timeout = 100; + while (true) { + stat = read_cpc_co_stat_conf(); + seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE; + seq_state >>= __ffs(CPC_Cx_STAT_CONF_SEQSTATE); + + /* U6 == coherent execution, ie. the core is up */ + if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U6) + break; + + /* Delay a little while before we start warning */ + if (timeout) { + timeout--; + mdelay(10); + continue; + } + + pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n", + core, stat); + mdelay(1000); + } + + mips_cpc_unlock_other(); + } else { + /* Take the core out of reset */ + write_gcr_co_reset_release(0); + } + + mips_cm_unlock_other(); + + /* The core is now powered up */ + bitmap_set(core_power, core, 1); +} + +static void remote_vpe_boot(void *dummy) +{ + unsigned core = cpu_core(¤t_cpu_data); + struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core]; + + mips_cps_boot_vpes(core_cfg, cpu_vpe_id(¤t_cpu_data)); +} + +static int cps_boot_secondary(int cpu, struct task_struct *idle) +{ + unsigned core = cpu_core(&cpu_data[cpu]); + unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]); + struct core_boot_config *core_cfg = &mips_cps_core_bootcfg[core]; + struct vpe_boot_config *vpe_cfg = &core_cfg->vpe_config[vpe_id]; + unsigned long core_entry; + unsigned int remote; + int err; + + /* We don't yet support booting CPUs in other clusters */ + if (cpu_cluster(&cpu_data[cpu]) != cpu_cluster(&raw_current_cpu_data)) + return -ENOSYS; + + vpe_cfg->pc = (unsigned long)&smp_bootstrap; + vpe_cfg->sp = __KSTK_TOS(idle); + vpe_cfg->gp = (unsigned long)task_thread_info(idle); + + atomic_or(1 << cpu_vpe_id(&cpu_data[cpu]), &core_cfg->vpe_mask); + + preempt_disable(); + + if (!test_bit(core, core_power)) { + /* Boot a VPE on a powered down core */ + boot_core(core, vpe_id); + goto out; + } + + if (cpu_has_vp) { + mips_cm_lock_other(0, core, vpe_id, CM_GCR_Cx_OTHER_BLOCK_LOCAL); + core_entry = CKSEG1ADDR((unsigned long)mips_cps_core_entry); + write_gcr_co_reset_base(core_entry); + mips_cm_unlock_other(); + } + + if (!cpus_are_siblings(cpu, smp_processor_id())) { + /* Boot a VPE on another powered up core */ + for (remote = 0; remote < NR_CPUS; remote++) { + if (!cpus_are_siblings(cpu, remote)) + continue; + if (cpu_online(remote)) + break; + } + if (remote >= NR_CPUS) { + pr_crit("No online CPU in core %u to start CPU%d\n", + core, cpu); + goto out; + } + + err = smp_call_function_single(remote, remote_vpe_boot, + NULL, 1); + if (err) + panic("Failed to call remote CPU\n"); + goto out; + } + + BUG_ON(!cpu_has_mipsmt && !cpu_has_vp); + + /* Boot a VPE on this core */ + mips_cps_boot_vpes(core_cfg, vpe_id); +out: + preempt_enable(); + return 0; +} + +static void cps_init_secondary(void) +{ + /* Disable MT - we only want to run 1 TC per VPE */ + if (cpu_has_mipsmt) + dmt(); + + if (mips_cm_revision() >= CM_REV_CM3) { + unsigned int ident = read_gic_vl_ident(); + + /* + * Ensure that our calculation of the VP ID matches up with + * what the GIC reports, otherwise we'll have configured + * interrupts incorrectly. + */ + BUG_ON(ident != mips_cm_vp_id(smp_processor_id())); + } + + if (cpu_has_veic) + clear_c0_status(ST0_IM); + else + change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | + STATUSF_IP4 | STATUSF_IP5 | + STATUSF_IP6 | STATUSF_IP7); +} + +static void cps_smp_finish(void) +{ + write_c0_compare(read_c0_count() + (8 * mips_hpt_frequency / HZ)); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + local_irq_enable(); +} + +#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_KEXEC) + +enum cpu_death { + CPU_DEATH_HALT, + CPU_DEATH_POWER, +}; + +static void cps_shutdown_this_cpu(enum cpu_death death) +{ + unsigned int cpu, core, vpe_id; + + cpu = smp_processor_id(); + core = cpu_core(&cpu_data[cpu]); + + if (death == CPU_DEATH_HALT) { + vpe_id = cpu_vpe_id(&cpu_data[cpu]); + + pr_debug("Halting core %d VP%d\n", core, vpe_id); + if (cpu_has_mipsmt) { + /* Halt this TC */ + write_c0_tchalt(TCHALT_H); + instruction_hazard(); + } else if (cpu_has_vp) { + write_cpc_cl_vp_stop(1 << vpe_id); + + /* Ensure that the VP_STOP register is written */ + wmb(); + } + } else { + if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) { + pr_debug("Gating power to core %d\n", core); + /* Power down the core */ + cps_pm_enter_state(CPS_PM_POWER_GATED); + } + } +} + +#ifdef CONFIG_KEXEC + +static void cps_kexec_nonboot_cpu(void) +{ + if (cpu_has_mipsmt || cpu_has_vp) + cps_shutdown_this_cpu(CPU_DEATH_HALT); + else + cps_shutdown_this_cpu(CPU_DEATH_POWER); +} + +#endif /* CONFIG_KEXEC */ + +#endif /* CONFIG_HOTPLUG_CPU || CONFIG_KEXEC */ + +#ifdef CONFIG_HOTPLUG_CPU + +static int cps_cpu_disable(void) +{ + unsigned cpu = smp_processor_id(); + struct core_boot_config *core_cfg; + + if (!cpu) + return -EBUSY; + + if (!cps_pm_support_state(CPS_PM_POWER_GATED)) + return -EINVAL; + + core_cfg = &mips_cps_core_bootcfg[cpu_core(¤t_cpu_data)]; + atomic_sub(1 << cpu_vpe_id(¤t_cpu_data), &core_cfg->vpe_mask); + smp_mb__after_atomic(); + set_cpu_online(cpu, false); + calculate_cpu_foreign_map(); + + return 0; +} + +static unsigned cpu_death_sibling; +static enum cpu_death cpu_death; + +void play_dead(void) +{ + unsigned int cpu; + + local_irq_disable(); + idle_task_exit(); + cpu = smp_processor_id(); + cpu_death = CPU_DEATH_POWER; + + pr_debug("CPU%d going offline\n", cpu); + + if (cpu_has_mipsmt || cpu_has_vp) { + /* Look for another online VPE within the core */ + for_each_online_cpu(cpu_death_sibling) { + if (!cpus_are_siblings(cpu, cpu_death_sibling)) + continue; + + /* + * There is an online VPE within the core. Just halt + * this TC and leave the core alone. + */ + cpu_death = CPU_DEATH_HALT; + break; + } + } + + /* This CPU has chosen its way out */ + (void)cpu_report_death(); + + cps_shutdown_this_cpu(cpu_death); + + /* This should never be reached */ + panic("Failed to offline CPU %u", cpu); +} + +static void wait_for_sibling_halt(void *ptr_cpu) +{ + unsigned cpu = (unsigned long)ptr_cpu; + unsigned vpe_id = cpu_vpe_id(&cpu_data[cpu]); + unsigned halted; + unsigned long flags; + + do { + local_irq_save(flags); + settc(vpe_id); + halted = read_tc_c0_tchalt(); + local_irq_restore(flags); + } while (!(halted & TCHALT_H)); +} + +static void cps_cpu_die(unsigned int cpu) +{ + unsigned core = cpu_core(&cpu_data[cpu]); + unsigned int vpe_id = cpu_vpe_id(&cpu_data[cpu]); + ktime_t fail_time; + unsigned stat; + int err; + + /* Wait for the cpu to choose its way out */ + if (!cpu_wait_death(cpu, 5)) { + pr_err("CPU%u: didn't offline\n", cpu); + return; + } + + /* + * Now wait for the CPU to actually offline. Without doing this that + * offlining may race with one or more of: + * + * - Onlining the CPU again. + * - Powering down the core if another VPE within it is offlined. + * - A sibling VPE entering a non-coherent state. + * + * In the non-MT halt case (ie. infinite loop) the CPU is doing nothing + * with which we could race, so do nothing. + */ + if (cpu_death == CPU_DEATH_POWER) { + /* + * Wait for the core to enter a powered down or clock gated + * state, the latter happening when a JTAG probe is connected + * in which case the CPC will refuse to power down the core. + */ + fail_time = ktime_add_ms(ktime_get(), 2000); + do { + mips_cm_lock_other(0, core, 0, CM_GCR_Cx_OTHER_BLOCK_LOCAL); + mips_cpc_lock_other(core); + stat = read_cpc_co_stat_conf(); + stat &= CPC_Cx_STAT_CONF_SEQSTATE; + stat >>= __ffs(CPC_Cx_STAT_CONF_SEQSTATE); + mips_cpc_unlock_other(); + mips_cm_unlock_other(); + + if (stat == CPC_Cx_STAT_CONF_SEQSTATE_D0 || + stat == CPC_Cx_STAT_CONF_SEQSTATE_D2 || + stat == CPC_Cx_STAT_CONF_SEQSTATE_U2) + break; + + /* + * The core ought to have powered down, but didn't & + * now we don't really know what state it's in. It's + * likely that its _pwr_up pin has been wired to logic + * 1 & it powered back up as soon as we powered it + * down... + * + * The best we can do is warn the user & continue in + * the hope that the core is doing nothing harmful & + * might behave properly if we online it later. + */ + if (WARN(ktime_after(ktime_get(), fail_time), + "CPU%u hasn't powered down, seq. state %u\n", + cpu, stat)) + break; + } while (1); + + /* Indicate the core is powered off */ + bitmap_clear(core_power, core, 1); + } else if (cpu_has_mipsmt) { + /* + * Have a CPU with access to the offlined CPUs registers wait + * for its TC to halt. + */ + err = smp_call_function_single(cpu_death_sibling, + wait_for_sibling_halt, + (void *)(unsigned long)cpu, 1); + if (err) + panic("Failed to call remote sibling CPU\n"); + } else if (cpu_has_vp) { + do { + mips_cm_lock_other(0, core, vpe_id, CM_GCR_Cx_OTHER_BLOCK_LOCAL); + stat = read_cpc_co_vp_running(); + mips_cm_unlock_other(); + } while (stat & (1 << vpe_id)); + } +} + +#endif /* CONFIG_HOTPLUG_CPU */ + +static const struct plat_smp_ops cps_smp_ops = { + .smp_setup = cps_smp_setup, + .prepare_cpus = cps_prepare_cpus, + .boot_secondary = cps_boot_secondary, + .init_secondary = cps_init_secondary, + .smp_finish = cps_smp_finish, + .send_ipi_single = mips_smp_send_ipi_single, + .send_ipi_mask = mips_smp_send_ipi_mask, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = cps_cpu_disable, + .cpu_die = cps_cpu_die, +#endif +#ifdef CONFIG_KEXEC + .kexec_nonboot_cpu = cps_kexec_nonboot_cpu, +#endif +}; + +bool mips_cps_smp_in_use(void) +{ + extern const struct plat_smp_ops *mp_ops; + return mp_ops == &cps_smp_ops; +} + +int register_cps_smp_ops(void) +{ + if (!mips_cm_present()) { + pr_warn("MIPS CPS SMP unable to proceed without a CM\n"); + return -ENODEV; + } + + /* check we have a GIC - we need one for IPIs */ + if (!(read_gcr_gic_status() & CM_GCR_GIC_STATUS_EX)) { + pr_warn("MIPS CPS SMP unable to proceed without a GIC\n"); + return -ENODEV; + } + + register_smp_ops(&cps_smp_ops); + return 0; +} diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c new file mode 100644 index 000000000..5f04a0141 --- /dev/null +++ b/arch/mips/kernel/smp-mt.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc. + * Elizabeth Clarke (beth@mips.com) + * Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/cpumask.h> +#include <linux/interrupt.h> +#include <linux/compiler.h> +#include <linux/sched/task_stack.h> +#include <linux/smp.h> + +#include <linux/atomic.h> +#include <asm/cacheflush.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/hardirq.h> +#include <asm/mmu_context.h> +#include <asm/time.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/mips_mt.h> +#include <asm/mips-cps.h> + +static void __init smvp_copy_vpe_config(void) +{ + write_vpe_c0_status( + (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config( read_c0_config()); + + /* make sure there are no software interrupts pending */ + write_vpe_c0_cause(0); + + /* Propagate Config7 */ + write_vpe_c0_config7(read_c0_config7()); + + write_vpe_c0_count(read_c0_count()); +} + +static unsigned int __init smvp_vpe_init(unsigned int tc, unsigned int mvpconf0, + unsigned int ncpu) +{ + if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) + return ncpu; + + /* Deactivate all but VPE 0 */ + if (tc != 0) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + + /* Record this as available CPU */ + set_cpu_possible(tc, true); + set_cpu_present(tc, true); + __cpu_number_map[tc] = ++ncpu; + __cpu_logical_map[ncpu] = tc; + } + + /* Disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); + + if (tc != 0) + smvp_copy_vpe_config(); + + cpu_set_vpe_id(&cpu_data[ncpu], tc); + + return ncpu; +} + +static void __init smvp_tc_init(unsigned int tc, unsigned int mvpconf0) +{ + unsigned long tmp; + + if (!tc) + return; + + /* bind a TC to each VPE, May as well put all excess TC's + on the last VPE */ + if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1)) + write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); + else { + write_tc_c0_tcbind(read_tc_c0_tcbind() | tc); + + /* and set XTC */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT)); + } + + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); +} + +static void vsmp_init_secondary(void) +{ + /* This is Malta specific: IPI,performance and timer interrupts */ + if (mips_gic_present()) + change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | + STATUSF_IP4 | STATUSF_IP5 | + STATUSF_IP6 | STATUSF_IP7); + else + change_c0_status(ST0_IM, STATUSF_IP0 | STATUSF_IP1 | + STATUSF_IP6 | STATUSF_IP7); +} + +static void vsmp_smp_finish(void) +{ + /* CDFIXME: remove this? */ + write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ)); + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpumask_set_cpu(smp_processor_id(), &mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + + local_irq_enable(); +} + +/* + * Setup the PC, SP, and GP of a secondary processor and start it + * running! + * smp_bootstrap is the place to resume from + * __KSTK_TOS(idle) is apparently the stack pointer + * (unsigned long)idle->thread_info the gp + * assumes a 1:1 mapping of TC => VPE + */ +static int vsmp_boot_secondary(int cpu, struct task_struct *idle) +{ + struct thread_info *gp = task_thread_info(idle); + dvpe(); + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(cpu); + + /* restart */ + write_tc_c0_tcrestart((unsigned long)&smp_bootstrap); + + /* enable the tc this vpe/cpu will be running */ + write_tc_c0_tcstatus((read_tc_c0_tcstatus() & ~TCSTATUS_IXMT) | TCSTATUS_A); + + write_tc_c0_tchalt(0); + + /* enable the VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + + /* stack pointer */ + write_tc_gpr_sp( __KSTK_TOS(idle)); + + /* global pointer */ + write_tc_gpr_gp((unsigned long)gp); + + flush_icache_range((unsigned long)gp, + (unsigned long)(gp + sizeof(struct thread_info))); + + /* finally out of configuration and into chaos */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + evpe(EVPE_ENABLE); + + return 0; +} + +/* + * Common setup before any secondaries are started + * Make sure all CPU's are in a sensible state before we boot any of the + * secondaries + */ +static void __init vsmp_smp_setup(void) +{ + unsigned int mvpconf0, ntc, tc, ncpu = 0; + unsigned int nvpe; + +#ifdef CONFIG_MIPS_MT_FPAFF + /* If we have an FPU, enroll ourselves in the FPU-full mask */ + if (cpu_has_fpu) + cpumask_set_cpu(0, &mt_fpu_cpumask); +#endif /* CONFIG_MIPS_MT_FPAFF */ + if (!cpu_has_mipsmt) + return; + + /* disable MT so we can configure */ + dvpe(); + dmt(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + mvpconf0 = read_c0_mvpconf0(); + ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; + + nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + smp_num_siblings = nvpe; + + /* we'll always have more TC's than VPE's, so loop setting everything + to a sensible state */ + for (tc = 0; tc <= ntc; tc++) { + settc(tc); + + smvp_tc_init(tc, mvpconf0); + ncpu = smvp_vpe_init(tc, mvpconf0, ncpu); + } + + /* Release config state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + /* We'll wait until starting the secondaries before starting MVPE */ + + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); +} + +static void __init vsmp_prepare_cpus(unsigned int max_cpus) +{ + mips_mt_set_cpuoptions(); +} + +const struct plat_smp_ops vsmp_smp_ops = { + .send_ipi_single = mips_smp_send_ipi_single, + .send_ipi_mask = mips_smp_send_ipi_mask, + .init_secondary = vsmp_init_secondary, + .smp_finish = vsmp_smp_finish, + .boot_secondary = vsmp_boot_secondary, + .smp_setup = vsmp_smp_setup, + .prepare_cpus = vsmp_prepare_cpus, +}; + diff --git a/arch/mips/kernel/smp-up.c b/arch/mips/kernel/smp-up.c new file mode 100644 index 000000000..525d3196f --- /dev/null +++ b/arch/mips/kernel/smp-up.c @@ -0,0 +1,79 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * Symmetric Uniprocessor (TM) Support + */ +#include <linux/kernel.h> +#include <linux/sched.h> + +/* + * Send inter-processor interrupt + */ +static void up_send_ipi_single(int cpu, unsigned int action) +{ + panic(KERN_ERR "%s called", __func__); +} + +static inline void up_send_ipi_mask(const struct cpumask *mask, + unsigned int action) +{ + panic(KERN_ERR "%s called", __func__); +} + +/* + * After we've done initial boot, this function is called to allow the + * board code to clean up state, if needed + */ +static void up_init_secondary(void) +{ +} + +static void up_smp_finish(void) +{ +} + +/* + * Firmware CPU startup hook + */ +static int up_boot_secondary(int cpu, struct task_struct *idle) +{ + return 0; +} + +static void __init up_smp_setup(void) +{ +} + +static void __init up_prepare_cpus(unsigned int max_cpus) +{ +} + +#ifdef CONFIG_HOTPLUG_CPU +static int up_cpu_disable(void) +{ + return -ENOSYS; +} + +static void up_cpu_die(unsigned int cpu) +{ + BUG(); +} +#endif + +const struct plat_smp_ops up_smp_ops = { + .send_ipi_single = up_send_ipi_single, + .send_ipi_mask = up_send_ipi_mask, + .init_secondary = up_init_secondary, + .smp_finish = up_smp_finish, + .boot_secondary = up_boot_secondary, + .smp_setup = up_smp_setup, + .prepare_cpus = up_prepare_cpus, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_disable = up_cpu_disable, + .cpu_die = up_cpu_die, +#endif +}; diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c new file mode 100644 index 000000000..14db66dbc --- /dev/null +++ b/arch/mips/kernel/smp.c @@ -0,0 +1,721 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Copyright (C) 2000, 2001 Kanoj Sarcar + * Copyright (C) 2000, 2001 Ralf Baechle + * Copyright (C) 2000, 2001 Silicon Graphics, Inc. + * Copyright (C) 2000, 2001, 2003 Broadcom Corporation + */ +#include <linux/cache.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/threads.h> +#include <linux/export.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/sched/mm.h> +#include <linux/cpumask.h> +#include <linux/cpu.h> +#include <linux/err.h> +#include <linux/ftrace.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_irq.h> + +#include <linux/atomic.h> +#include <asm/cpu.h> +#include <asm/ginvt.h> +#include <asm/processor.h> +#include <asm/idle.h> +#include <asm/r4k-timer.h> +#include <asm/mips-cps.h> +#include <asm/mmu_context.h> +#include <asm/time.h> +#include <asm/setup.h> +#include <asm/maar.h> + +int __cpu_number_map[CONFIG_MIPS_NR_CPU_NR_MAP]; /* Map physical to logical */ +EXPORT_SYMBOL(__cpu_number_map); + +int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */ +EXPORT_SYMBOL(__cpu_logical_map); + +/* Number of TCs (or siblings in Intel speak) per CPU core */ +int smp_num_siblings = 1; +EXPORT_SYMBOL(smp_num_siblings); + +/* representing the TCs (or siblings in Intel speak) of each logical CPU */ +cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_sibling_map); + +/* representing the core map of multi-core chips of each logical CPU */ +cpumask_t cpu_core_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_core_map); + +static DECLARE_COMPLETION(cpu_starting); +static DECLARE_COMPLETION(cpu_running); + +/* + * A logcal cpu mask containing only one VPE per core to + * reduce the number of IPIs on large MT systems. + */ +cpumask_t cpu_foreign_map[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(cpu_foreign_map); + +/* representing cpus for which sibling maps can be computed */ +static cpumask_t cpu_sibling_setup_map; + +/* representing cpus for which core maps can be computed */ +static cpumask_t cpu_core_setup_map; + +cpumask_t cpu_coherent_mask; + +#ifdef CONFIG_GENERIC_IRQ_IPI +static struct irq_desc *call_desc; +static struct irq_desc *sched_desc; +#endif + +static inline void set_cpu_sibling_map(int cpu) +{ + int i; + + cpumask_set_cpu(cpu, &cpu_sibling_setup_map); + + if (smp_num_siblings > 1) { + for_each_cpu(i, &cpu_sibling_setup_map) { + if (cpus_are_siblings(cpu, i)) { + cpumask_set_cpu(i, &cpu_sibling_map[cpu]); + cpumask_set_cpu(cpu, &cpu_sibling_map[i]); + } + } + } else + cpumask_set_cpu(cpu, &cpu_sibling_map[cpu]); +} + +static inline void set_cpu_core_map(int cpu) +{ + int i; + + cpumask_set_cpu(cpu, &cpu_core_setup_map); + + for_each_cpu(i, &cpu_core_setup_map) { + if (cpu_data[cpu].package == cpu_data[i].package) { + cpumask_set_cpu(i, &cpu_core_map[cpu]); + cpumask_set_cpu(cpu, &cpu_core_map[i]); + } + } +} + +/* + * Calculate a new cpu_foreign_map mask whenever a + * new cpu appears or disappears. + */ +void calculate_cpu_foreign_map(void) +{ + int i, k, core_present; + cpumask_t temp_foreign_map; + + /* Re-calculate the mask */ + cpumask_clear(&temp_foreign_map); + for_each_online_cpu(i) { + core_present = 0; + for_each_cpu(k, &temp_foreign_map) + if (cpus_are_siblings(i, k)) + core_present = 1; + if (!core_present) + cpumask_set_cpu(i, &temp_foreign_map); + } + + for_each_online_cpu(i) + cpumask_andnot(&cpu_foreign_map[i], + &temp_foreign_map, &cpu_sibling_map[i]); +} + +const struct plat_smp_ops *mp_ops; +EXPORT_SYMBOL(mp_ops); + +void register_smp_ops(const struct plat_smp_ops *ops) +{ + if (mp_ops) + printk(KERN_WARNING "Overriding previously set SMP ops\n"); + + mp_ops = ops; +} + +#ifdef CONFIG_GENERIC_IRQ_IPI +void mips_smp_send_ipi_single(int cpu, unsigned int action) +{ + mips_smp_send_ipi_mask(cpumask_of(cpu), action); +} + +void mips_smp_send_ipi_mask(const struct cpumask *mask, unsigned int action) +{ + unsigned long flags; + unsigned int core; + int cpu; + + local_irq_save(flags); + + switch (action) { + case SMP_CALL_FUNCTION: + __ipi_send_mask(call_desc, mask); + break; + + case SMP_RESCHEDULE_YOURSELF: + __ipi_send_mask(sched_desc, mask); + break; + + default: + BUG(); + } + + if (mips_cpc_present()) { + for_each_cpu(cpu, mask) { + if (cpus_are_siblings(cpu, smp_processor_id())) + continue; + + core = cpu_core(&cpu_data[cpu]); + + while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) { + mips_cm_lock_other_cpu(cpu, CM_GCR_Cx_OTHER_BLOCK_LOCAL); + mips_cpc_lock_other(core); + write_cpc_co_cmd(CPC_Cx_CMD_PWRUP); + mips_cpc_unlock_other(); + mips_cm_unlock_other(); + } + } + } + + local_irq_restore(flags); +} + + +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + scheduler_ipi(); + + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + generic_smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static void smp_ipi_init_one(unsigned int virq, const char *name, + irq_handler_t handler) +{ + int ret; + + irq_set_handler(virq, handle_percpu_irq); + ret = request_irq(virq, handler, IRQF_PERCPU, name, NULL); + BUG_ON(ret); +} + +static unsigned int call_virq, sched_virq; + +int mips_smp_ipi_allocate(const struct cpumask *mask) +{ + int virq; + struct irq_domain *ipidomain; + struct device_node *node; + + node = of_irq_find_parent(of_root); + ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI); + + /* + * Some platforms have half DT setup. So if we found irq node but + * didn't find an ipidomain, try to search for one that is not in the + * DT. + */ + if (node && !ipidomain) + ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI); + + /* + * There are systems which use IPI IRQ domains, but only have one + * registered when some runtime condition is met. For example a Malta + * kernel may include support for GIC & CPU interrupt controller IPI + * IRQ domains, but if run on a system with no GIC & no MT ASE then + * neither will be supported or registered. + * + * We only have a problem if we're actually using multiple CPUs so fail + * loudly if that is the case. Otherwise simply return, skipping IPI + * setup, if we're running with only a single CPU. + */ + if (!ipidomain) { + BUG_ON(num_present_cpus() > 1); + return 0; + } + + virq = irq_reserve_ipi(ipidomain, mask); + BUG_ON(!virq); + if (!call_virq) + call_virq = virq; + + virq = irq_reserve_ipi(ipidomain, mask); + BUG_ON(!virq); + if (!sched_virq) + sched_virq = virq; + + if (irq_domain_is_ipi_per_cpu(ipidomain)) { + int cpu; + + for_each_cpu(cpu, mask) { + smp_ipi_init_one(call_virq + cpu, "IPI call", + ipi_call_interrupt); + smp_ipi_init_one(sched_virq + cpu, "IPI resched", + ipi_resched_interrupt); + } + } else { + smp_ipi_init_one(call_virq, "IPI call", ipi_call_interrupt); + smp_ipi_init_one(sched_virq, "IPI resched", + ipi_resched_interrupt); + } + + return 0; +} + +int mips_smp_ipi_free(const struct cpumask *mask) +{ + struct irq_domain *ipidomain; + struct device_node *node; + + node = of_irq_find_parent(of_root); + ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI); + + /* + * Some platforms have half DT setup. So if we found irq node but + * didn't find an ipidomain, try to search for one that is not in the + * DT. + */ + if (node && !ipidomain) + ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI); + + BUG_ON(!ipidomain); + + if (irq_domain_is_ipi_per_cpu(ipidomain)) { + int cpu; + + for_each_cpu(cpu, mask) { + free_irq(call_virq + cpu, NULL); + free_irq(sched_virq + cpu, NULL); + } + } + irq_destroy_ipi(call_virq, mask); + irq_destroy_ipi(sched_virq, mask); + return 0; +} + + +static int __init mips_smp_ipi_init(void) +{ + if (num_possible_cpus() == 1) + return 0; + + mips_smp_ipi_allocate(cpu_possible_mask); + + call_desc = irq_to_desc(call_virq); + sched_desc = irq_to_desc(sched_virq); + + return 0; +} +early_initcall(mips_smp_ipi_init); +#endif + +/* + * First C code run on the secondary CPUs after being started up by + * the master. + */ +asmlinkage void start_secondary(void) +{ + unsigned int cpu; + + cpu_probe(); + per_cpu_trap_init(false); + mips_clockevent_init(); + mp_ops->init_secondary(); + cpu_report(); + maar_init(); + + /* + * XXX parity protection should be folded in here when it's converted + * to an option instead of something based on .cputype + */ + + calibrate_delay(); + cpu = smp_processor_id(); + cpu_data[cpu].udelay_val = loops_per_jiffy; + + set_cpu_sibling_map(cpu); + set_cpu_core_map(cpu); + + cpumask_set_cpu(cpu, &cpu_coherent_mask); + notify_cpu_starting(cpu); + + /* Notify boot CPU that we're starting & ready to sync counters */ + complete(&cpu_starting); + + synchronise_count_slave(cpu); + + /* The CPU is running and counters synchronised, now mark it online */ + set_cpu_online(cpu, true); + + calculate_cpu_foreign_map(); + + /* + * Notify boot CPU that we're up & online and it can safely return + * from __cpu_up + */ + complete(&cpu_running); + + /* + * irq will be enabled in ->smp_finish(), enabling it too early + * is dangerous. + */ + WARN_ON_ONCE(!irqs_disabled()); + mp_ops->smp_finish(); + + cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); +} + +static void stop_this_cpu(void *dummy) +{ + /* + * Remove this CPU: + */ + + set_cpu_online(smp_processor_id(), false); + calculate_cpu_foreign_map(); + local_irq_disable(); + while (1); +} + +void smp_send_stop(void) +{ + smp_call_function(stop_this_cpu, NULL, 0); +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ +} + +/* called from main before smp_init() */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + init_new_context(current, &init_mm); + current_thread_info()->cpu = 0; + mp_ops->prepare_cpus(max_cpus); + set_cpu_sibling_map(0); + set_cpu_core_map(0); + calculate_cpu_foreign_map(); +#ifndef CONFIG_HOTPLUG_CPU + init_cpu_present(cpu_possible_mask); +#endif + cpumask_copy(&cpu_coherent_mask, cpu_possible_mask); +} + +/* preload SMP state for boot cpu */ +void smp_prepare_boot_cpu(void) +{ + if (mp_ops->prepare_boot_cpu) + mp_ops->prepare_boot_cpu(); + set_cpu_possible(0, true); + set_cpu_online(0, true); +} + +int __cpu_up(unsigned int cpu, struct task_struct *tidle) +{ + int err; + + err = mp_ops->boot_secondary(cpu, tidle); + if (err) + return err; + + /* Wait for CPU to start and be ready to sync counters */ + if (!wait_for_completion_timeout(&cpu_starting, + msecs_to_jiffies(1000))) { + pr_crit("CPU%u: failed to start\n", cpu); + return -EIO; + } + + synchronise_count_master(cpu); + + /* Wait for CPU to finish startup & mark itself online before return */ + wait_for_completion(&cpu_running); + return 0; +} + +/* Not really SMP stuff ... */ +int setup_profiling_timer(unsigned int multiplier) +{ + return 0; +} + +static void flush_tlb_all_ipi(void *info) +{ + local_flush_tlb_all(); +} + +void flush_tlb_all(void) +{ + if (cpu_has_mmid) { + htw_stop(); + ginvt_full(); + sync_ginv(); + instruction_hazard(); + htw_start(); + return; + } + + on_each_cpu(flush_tlb_all_ipi, NULL, 1); +} + +static void flush_tlb_mm_ipi(void *mm) +{ + drop_mmu_context((struct mm_struct *)mm); +} + +/* + * Special Variant of smp_call_function for use by TLB functions: + * + * o No return value + * o collapses to normal function call on UP kernels + * o collapses to normal function call on systems with a single shared + * primary cache. + */ +static inline void smp_on_other_tlbs(void (*func) (void *info), void *info) +{ + smp_call_function(func, info, 1); +} + +static inline void smp_on_each_tlb(void (*func) (void *info), void *info) +{ + preempt_disable(); + + smp_on_other_tlbs(func, info); + func(info); + + preempt_enable(); +} + +/* + * The following tlb flush calls are invoked when old translations are + * being torn down, or pte attributes are changing. For single threaded + * address spaces, a new context is obtained on the current cpu, and tlb + * context on other cpus are invalidated to force a new context allocation + * at switch_mm time, should the mm ever be used on other cpus. For + * multithreaded address spaces, intercpu interrupts have to be sent. + * Another case where intercpu interrupts are required is when the target + * mm might be active on another cpu (eg debuggers doing the flushes on + * behalf of debugees, kswapd stealing pages from another process etc). + * Kanoj 07/00. + */ + +void flush_tlb_mm(struct mm_struct *mm) +{ + preempt_disable(); + + if (cpu_has_mmid) { + /* + * No need to worry about other CPUs - the ginvt in + * drop_mmu_context() will be globalized. + */ + } else if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + smp_on_other_tlbs(flush_tlb_mm_ipi, mm); + } else { + unsigned int cpu; + + for_each_online_cpu(cpu) { + if (cpu != smp_processor_id() && cpu_context(cpu, mm)) + set_cpu_context(cpu, mm, 0); + } + } + drop_mmu_context(mm); + + preempt_enable(); +} + +struct flush_tlb_data { + struct vm_area_struct *vma; + unsigned long addr1; + unsigned long addr2; +}; + +static void flush_tlb_range_ipi(void *info) +{ + struct flush_tlb_data *fd = info; + + local_flush_tlb_range(fd->vma, fd->addr1, fd->addr2); +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + unsigned long addr; + u32 old_mmid; + + preempt_disable(); + if (cpu_has_mmid) { + htw_stop(); + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(cpu_asid(0, mm)); + mtc0_tlbw_hazard(); + addr = round_down(start, PAGE_SIZE * 2); + end = round_up(end, PAGE_SIZE * 2); + do { + ginvt_va_mmid(addr); + sync_ginv(); + addr += PAGE_SIZE * 2; + } while (addr < end); + write_c0_memorymapid(old_mmid); + instruction_hazard(); + htw_start(); + } else if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + struct flush_tlb_data fd = { + .vma = vma, + .addr1 = start, + .addr2 = end, + }; + + smp_on_other_tlbs(flush_tlb_range_ipi, &fd); + local_flush_tlb_range(vma, start, end); + } else { + unsigned int cpu; + int exec = vma->vm_flags & VM_EXEC; + + for_each_online_cpu(cpu) { + /* + * flush_cache_range() will only fully flush icache if + * the VMA is executable, otherwise we must invalidate + * ASID without it appearing to has_valid_asid() as if + * mm has been completely unused by that CPU. + */ + if (cpu != smp_processor_id() && cpu_context(cpu, mm)) + set_cpu_context(cpu, mm, !exec); + } + local_flush_tlb_range(vma, start, end); + } + preempt_enable(); +} + +static void flush_tlb_kernel_range_ipi(void *info) +{ + struct flush_tlb_data *fd = info; + + local_flush_tlb_kernel_range(fd->addr1, fd->addr2); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct flush_tlb_data fd = { + .addr1 = start, + .addr2 = end, + }; + + on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1); +} + +static void flush_tlb_page_ipi(void *info) +{ + struct flush_tlb_data *fd = info; + + local_flush_tlb_page(fd->vma, fd->addr1); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + u32 old_mmid; + + preempt_disable(); + if (cpu_has_mmid) { + htw_stop(); + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(cpu_asid(0, vma->vm_mm)); + mtc0_tlbw_hazard(); + ginvt_va_mmid(page); + sync_ginv(); + write_c0_memorymapid(old_mmid); + instruction_hazard(); + htw_start(); + } else if ((atomic_read(&vma->vm_mm->mm_users) != 1) || + (current->mm != vma->vm_mm)) { + struct flush_tlb_data fd = { + .vma = vma, + .addr1 = page, + }; + + smp_on_other_tlbs(flush_tlb_page_ipi, &fd); + local_flush_tlb_page(vma, page); + } else { + unsigned int cpu; + + for_each_online_cpu(cpu) { + /* + * flush_cache_page() only does partial flushes, so + * invalidate ASID without it appearing to + * has_valid_asid() as if mm has been completely unused + * by that CPU. + */ + if (cpu != smp_processor_id() && cpu_context(cpu, vma->vm_mm)) + set_cpu_context(cpu, vma->vm_mm, 1); + } + local_flush_tlb_page(vma, page); + } + preempt_enable(); +} + +static void flush_tlb_one_ipi(void *info) +{ + unsigned long vaddr = (unsigned long) info; + + local_flush_tlb_one(vaddr); +} + +void flush_tlb_one(unsigned long vaddr) +{ + smp_on_each_tlb(flush_tlb_one_ipi, (void *) vaddr); +} + +EXPORT_SYMBOL(flush_tlb_page); +EXPORT_SYMBOL(flush_tlb_one); + +#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST + +static DEFINE_PER_CPU(call_single_data_t, tick_broadcast_csd); + +void tick_broadcast(const struct cpumask *mask) +{ + call_single_data_t *csd; + int cpu; + + for_each_cpu(cpu, mask) { + csd = &per_cpu(tick_broadcast_csd, cpu); + smp_call_function_single_async(cpu, csd); + } +} + +static void tick_broadcast_callee(void *info) +{ + tick_receive_broadcast(); +} + +static int __init tick_broadcast_init(void) +{ + call_single_data_t *csd; + int cpu; + + for (cpu = 0; cpu < NR_CPUS; cpu++) { + csd = &per_cpu(tick_broadcast_csd, cpu); + csd->func = tick_broadcast_callee; + } + + return 0; +} +early_initcall(tick_broadcast_init); + +#endif /* CONFIG_GENERIC_CLOCKEVENTS_BROADCAST */ diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c new file mode 100644 index 000000000..ab4e3e1b1 --- /dev/null +++ b/arch/mips/kernel/spinlock_test.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/init.h> +#include <linux/kthread.h> +#include <linux/hrtimer.h> +#include <linux/fs.h> +#include <linux/debugfs.h> +#include <linux/export.h> +#include <linux/spinlock.h> +#include <asm/debug.h> + +static int ss_get(void *data, u64 *val) +{ + ktime_t start, finish; + int loops; + int cont; + DEFINE_RAW_SPINLOCK(ss_spin); + + loops = 1000000; + cont = 1; + + start = ktime_get(); + + while (cont) { + raw_spin_lock(&ss_spin); + loops--; + if (loops == 0) + cont = 0; + raw_spin_unlock(&ss_spin); + } + + finish = ktime_get(); + + *val = ktime_us_delta(finish, start); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_ss, ss_get, NULL, "%llu\n"); + + + +struct spin_multi_state { + raw_spinlock_t lock; + atomic_t start_wait; + atomic_t enter_wait; + atomic_t exit_wait; + int loops; +}; + +struct spin_multi_per_thread { + struct spin_multi_state *state; + ktime_t start; +}; + +static int multi_other(void *data) +{ + int loops; + int cont; + struct spin_multi_per_thread *pt = data; + struct spin_multi_state *s = pt->state; + + loops = s->loops; + cont = 1; + + atomic_dec(&s->enter_wait); + + while (atomic_read(&s->enter_wait)) + ; /* spin */ + + pt->start = ktime_get(); + + atomic_dec(&s->start_wait); + + while (atomic_read(&s->start_wait)) + ; /* spin */ + + while (cont) { + raw_spin_lock(&s->lock); + loops--; + if (loops == 0) + cont = 0; + raw_spin_unlock(&s->lock); + } + + atomic_dec(&s->exit_wait); + while (atomic_read(&s->exit_wait)) + ; /* spin */ + return 0; +} + +static int multi_get(void *data, u64 *val) +{ + ktime_t finish; + struct spin_multi_state ms; + struct spin_multi_per_thread t1, t2; + + ms.lock = __RAW_SPIN_LOCK_UNLOCKED("multi_get"); + ms.loops = 1000000; + + atomic_set(&ms.start_wait, 2); + atomic_set(&ms.enter_wait, 2); + atomic_set(&ms.exit_wait, 2); + t1.state = &ms; + t2.state = &ms; + + kthread_run(multi_other, &t2, "multi_get"); + + multi_other(&t1); + + finish = ktime_get(); + + *val = ktime_us_delta(finish, t1.start); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n"); + +static int __init spinlock_test(void) +{ + debugfs_create_file("spin_single", S_IRUGO, mips_debugfs_dir, NULL, + &fops_ss); + debugfs_create_file("spin_multi", S_IRUGO, mips_debugfs_dir, NULL, + &fops_multi); + return 0; +} +device_initcall(spinlock_test); diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c new file mode 100644 index 000000000..d5d96214c --- /dev/null +++ b/arch/mips/kernel/spram.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MIPS SPRAM support + * + * Copyright (C) 2007, 2008 MIPS Technologies, Inc. + */ +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/stddef.h> + +#include <asm/fpu.h> +#include <asm/mipsregs.h> +#include <asm/r4kcache.h> +#include <asm/hazards.h> + +/* + * These definitions are correct for the 24K/34K/74K SPRAM sample + * implementation. The 4KS interpreted the tags differently... + */ +#define SPRAM_TAG0_ENABLE 0x00000080 +#define SPRAM_TAG0_PA_MASK 0xfffff000 +#define SPRAM_TAG1_SIZE_MASK 0xfffff000 + +#define SPRAM_TAG_STRIDE 8 + +#define ERRCTL_SPRAM (1 << 28) + +/* errctl access */ +#define read_c0_errctl(x) read_c0_ecc(x) +#define write_c0_errctl(x) write_c0_ecc(x) + +/* + * Different semantics to the set_c0_* function built by __BUILD_SET_C0 + */ +static unsigned int bis_c0_errctl(unsigned int set) +{ + unsigned int res; + res = read_c0_errctl(); + write_c0_errctl(res | set); + return res; +} + +static void ispram_store_tag(unsigned int offset, unsigned int data) +{ + unsigned int errctl; + + /* enable SPRAM tag access */ + errctl = bis_c0_errctl(ERRCTL_SPRAM); + ehb(); + + write_c0_taglo(data); + ehb(); + + cache_op(Index_Store_Tag_I, CKSEG0|offset); + ehb(); + + write_c0_errctl(errctl); + ehb(); +} + + +static unsigned int ispram_load_tag(unsigned int offset) +{ + unsigned int data; + unsigned int errctl; + + /* enable SPRAM tag access */ + errctl = bis_c0_errctl(ERRCTL_SPRAM); + ehb(); + cache_op(Index_Load_Tag_I, CKSEG0 | offset); + ehb(); + data = read_c0_taglo(); + ehb(); + write_c0_errctl(errctl); + ehb(); + + return data; +} + +static void dspram_store_tag(unsigned int offset, unsigned int data) +{ + unsigned int errctl; + + /* enable SPRAM tag access */ + errctl = bis_c0_errctl(ERRCTL_SPRAM); + ehb(); + write_c0_dtaglo(data); + ehb(); + cache_op(Index_Store_Tag_D, CKSEG0 | offset); + ehb(); + write_c0_errctl(errctl); + ehb(); +} + + +static unsigned int dspram_load_tag(unsigned int offset) +{ + unsigned int data; + unsigned int errctl; + + errctl = bis_c0_errctl(ERRCTL_SPRAM); + ehb(); + cache_op(Index_Load_Tag_D, CKSEG0 | offset); + ehb(); + data = read_c0_dtaglo(); + ehb(); + write_c0_errctl(errctl); + ehb(); + + return data; +} + +static void probe_spram(char *type, + unsigned int base, + unsigned int (*read)(unsigned int), + void (*write)(unsigned int, unsigned int)) +{ + unsigned int firstsize = 0, lastsize = 0; + unsigned int firstpa = 0, lastpa = 0, pa = 0; + unsigned int offset = 0; + unsigned int size, tag0, tag1; + unsigned int enabled; + int i; + + /* + * The limit is arbitrary but avoids the loop running away if + * the SPRAM tags are implemented differently + */ + + for (i = 0; i < 8; i++) { + tag0 = read(offset); + tag1 = read(offset+SPRAM_TAG_STRIDE); + pr_debug("DBG %s%d: tag0=%08x tag1=%08x\n", + type, i, tag0, tag1); + + size = tag1 & SPRAM_TAG1_SIZE_MASK; + + if (size == 0) + break; + + if (i != 0) { + /* tags may repeat... */ + if ((pa == firstpa && size == firstsize) || + (pa == lastpa && size == lastsize)) + break; + } + + /* Align base with size */ + base = (base + size - 1) & ~(size-1); + + /* reprogram the base address base address and enable */ + tag0 = (base & SPRAM_TAG0_PA_MASK) | SPRAM_TAG0_ENABLE; + write(offset, tag0); + + base += size; + + /* reread the tag */ + tag0 = read(offset); + pa = tag0 & SPRAM_TAG0_PA_MASK; + enabled = tag0 & SPRAM_TAG0_ENABLE; + + if (i == 0) { + firstpa = pa; + firstsize = size; + } + + lastpa = pa; + lastsize = size; + + if (strcmp(type, "DSPRAM") == 0) { + unsigned int *vp = (unsigned int *)(CKSEG1 | pa); + unsigned int v; +#define TDAT 0x5a5aa5a5 + vp[0] = TDAT; + vp[1] = ~TDAT; + + mb(); + + v = vp[0]; + if (v != TDAT) + printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n", + vp, TDAT, v); + v = vp[1]; + if (v != ~TDAT) + printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n", + vp+1, ~TDAT, v); + } + + pr_info("%s%d: PA=%08x,Size=%08x%s\n", + type, i, pa, size, enabled ? ",enabled" : ""); + offset += 2 * SPRAM_TAG_STRIDE; + } +} +void spram_config(void) +{ + unsigned int config0; + + switch (current_cpu_type()) { + case CPU_24K: + case CPU_34K: + case CPU_74K: + case CPU_1004K: + case CPU_1074K: + case CPU_INTERAPTIV: + case CPU_PROAPTIV: + case CPU_P5600: + case CPU_QEMU_GENERIC: + case CPU_I6400: + case CPU_P6600: + config0 = read_c0_config(); + /* FIXME: addresses are Malta specific */ + if (config0 & MIPS_CONF_ISP) { + probe_spram("ISPRAM", 0x1c000000, + &ispram_load_tag, &ispram_store_tag); + } + if (config0 & MIPS_CONF_DSP) + probe_spram("DSPRAM", 0x1c100000, + &dspram_load_tag, &dspram_store_tag); + } +} diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c new file mode 100644 index 000000000..f2e720940 --- /dev/null +++ b/arch/mips/kernel/stacktrace.c @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Stack trace management functions + * + * Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp> + */ +#include <linux/sched.h> +#include <linux/sched/debug.h> +#include <linux/sched/task_stack.h> +#include <linux/stacktrace.h> +#include <linux/export.h> +#include <asm/stacktrace.h> + +/* + * Save stack-backtrace addresses into a stack_trace buffer: + */ +static void save_raw_context_stack(struct stack_trace *trace, + unsigned long reg29, int savesched) +{ + unsigned long *sp = (unsigned long *)reg29; + unsigned long addr; + + while (!kstack_end(sp)) { + addr = *sp++; + if (__kernel_text_address(addr) && + (savesched || !in_sched_functions(addr))) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = addr; + if (trace->nr_entries >= trace->max_entries) + break; + } + } +} + +static void save_context_stack(struct stack_trace *trace, + struct task_struct *tsk, struct pt_regs *regs, int savesched) +{ + unsigned long sp = regs->regs[29]; +#ifdef CONFIG_KALLSYMS + unsigned long ra = regs->regs[31]; + unsigned long pc = regs->cp0_epc; + + if (raw_show_trace || !__kernel_text_address(pc)) { + unsigned long stack_page = + (unsigned long)task_stack_page(tsk); + if (stack_page && sp >= stack_page && + sp <= stack_page + THREAD_SIZE - 32) + save_raw_context_stack(trace, sp, savesched); + return; + } + do { + if (savesched || !in_sched_functions(pc)) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = pc; + if (trace->nr_entries >= trace->max_entries) + break; + } + pc = unwind_stack(tsk, &sp, pc, &ra); + } while (pc); +#else + save_raw_context_stack(trace, sp, savesched); +#endif +} + +/* + * Save stack-backtrace addresses into a stack_trace buffer. + */ +void save_stack_trace(struct stack_trace *trace) +{ + save_stack_trace_tsk(current, trace); +} +EXPORT_SYMBOL_GPL(save_stack_trace); + +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + struct pt_regs dummyregs; + struct pt_regs *regs = &dummyregs; + + WARN_ON(trace->nr_entries || !trace->max_entries); + + if (tsk != current) { + regs->regs[29] = tsk->thread.reg29; + regs->regs[31] = 0; + regs->cp0_epc = tsk->thread.reg31; + } else + prepare_frametrace(regs); + save_context_stack(trace, tsk, regs, tsk == current); +} +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c new file mode 100644 index 000000000..abdd7aaa3 --- /dev/null +++ b/arch/mips/kernel/sync-r4k.c @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Count register synchronisation. + * + * All CPUs will have their count registers synchronised to the CPU0 next time + * value. This can cause a small timewarp for CPU0. All other CPU's should + * not have done anything significant (but they may have had interrupts + * enabled briefly - prom_smp_finish() should not be responsible for enabling + * interrupts...) + */ + +#include <linux/kernel.h> +#include <linux/irqflags.h> +#include <linux/cpumask.h> + +#include <asm/r4k-timer.h> +#include <linux/atomic.h> +#include <asm/barrier.h> +#include <asm/mipsregs.h> + +static unsigned int initcount = 0; +static atomic_t count_count_start = ATOMIC_INIT(0); +static atomic_t count_count_stop = ATOMIC_INIT(0); + +#define COUNTON 100 +#define NR_LOOPS 3 + +void synchronise_count_master(int cpu) +{ + int i; + unsigned long flags; + + pr_info("Synchronize counters for CPU %u: ", cpu); + + local_irq_save(flags); + + /* + * We loop a few times to get a primed instruction cache, + * then the last pass is more or less synchronised and + * the master and slaves each set their cycle counters to a known + * value all at once. This reduces the chance of having random offsets + * between the processors, and guarantees that the maximum + * delay between the cycle counters is never bigger than + * the latency of information-passing (cachelines) between + * two CPUs. + */ + + for (i = 0; i < NR_LOOPS; i++) { + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) + mb(); + atomic_set(&count_count_stop, 0); + smp_wmb(); + + /* Let the slave writes its count register */ + atomic_inc(&count_count_start); + + /* Count will be initialised to current timer */ + if (i == 1) + initcount = read_c0_count(); + + /* + * Everyone initialises count in the last loop: + */ + if (i == NR_LOOPS-1) + write_c0_count(initcount); + + /* + * Wait for slave to leave the synchronization point: + */ + while (atomic_read(&count_count_stop) != 1) + mb(); + atomic_set(&count_count_start, 0); + smp_wmb(); + atomic_inc(&count_count_stop); + } + /* Arrange for an interrupt in a short while */ + write_c0_compare(read_c0_count() + COUNTON); + + local_irq_restore(flags); + + /* + * i386 code reported the skew here, but the + * count registers were almost certainly out of sync + * so no point in alarming people + */ + pr_cont("done.\n"); +} + +void synchronise_count_slave(int cpu) +{ + int i; + unsigned long flags; + + local_irq_save(flags); + + /* + * Not every cpu is online at the time this gets called, + * so we first wait for the master to say everyone is ready + */ + + for (i = 0; i < NR_LOOPS; i++) { + atomic_inc(&count_count_start); + while (atomic_read(&count_count_start) != 2) + mb(); + + /* + * Everyone initialises count in the last loop: + */ + if (i == NR_LOOPS-1) + write_c0_count(initcount); + + atomic_inc(&count_count_stop); + while (atomic_read(&count_count_stop) != 2) + mb(); + } + /* Arrange for an interrupt in a short while */ + write_c0_compare(read_c0_count() + COUNTON); + + local_irq_restore(flags); +} +#undef NR_LOOPS diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c new file mode 100644 index 000000000..5512cd586 --- /dev/null +++ b/arch/mips/kernel/syscall.c @@ -0,0 +1,242 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995, 1996, 1997, 2000, 2001, 05 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2001 MIPS Technologies, Inc. + */ +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/linkage.h> +#include <linux/fs.h> +#include <linux/smp.h> +#include <linux/ptrace.h> +#include <linux/string.h> +#include <linux/syscalls.h> +#include <linux/file.h> +#include <linux/utsname.h> +#include <linux/unistd.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/compiler.h> +#include <linux/ipc.h> +#include <linux/uaccess.h> +#include <linux/slab.h> +#include <linux/elf.h> +#include <linux/sched/task_stack.h> + +#include <asm/asm.h> +#include <asm/asm-eva.h> +#include <asm/branch.h> +#include <asm/cachectl.h> +#include <asm/cacheflush.h> +#include <asm/asm-offsets.h> +#include <asm/signal.h> +#include <asm/sim.h> +#include <asm/shmparam.h> +#include <asm/sync.h> +#include <asm/sysmips.h> +#include <asm/switch_to.h> + +/* + * For historic reasons the pipe(2) syscall on MIPS has an unusual calling + * convention. It returns results in registers $v0 / $v1 which means there + * is no need for it to do verify the validity of a userspace pointer + * argument. Historically that used to be expensive in Linux. These days + * the performance advantage is negligible. + */ +asmlinkage int sysm_pipe(void) +{ + int fd[2]; + int error = do_pipe_flags(fd, 0); + if (error) + return error; + current_pt_regs()->regs[3] = fd[1]; + return fd[0]; +} + +SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, + fd, off_t, offset) +{ + if (offset & ~PAGE_MASK) + return -EINVAL; + return ksys_mmap_pgoff(addr, len, prot, flags, fd, + offset >> PAGE_SHIFT); +} + +SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) +{ + if (pgoff & (~PAGE_MASK >> 12)) + return -EINVAL; + + return ksys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); +} + +save_static_function(sys_fork); +save_static_function(sys_clone); +save_static_function(sys_clone3); + +SYSCALL_DEFINE1(set_thread_area, unsigned long, addr) +{ + struct thread_info *ti = task_thread_info(current); + + ti->tp_value = addr; + if (cpu_has_userlocal) + write_c0_userlocal(addr); + + return 0; +} + +static inline int mips_atomic_set(unsigned long addr, unsigned long new) +{ + unsigned long old, tmp; + struct pt_regs *regs; + unsigned int err; + + if (unlikely(addr & 3)) + return -EINVAL; + + if (unlikely(!access_ok((const void __user *)addr, 4))) + return -EINVAL; + + if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) { + __asm__ __volatile__ ( + " .set push \n" + " .set arch=r4000 \n" + " li %[err], 0 \n" + "1: ll %[old], (%[addr]) \n" + " move %[tmp], %[new] \n" + "2: sc %[tmp], (%[addr]) \n" + " beqzl %[tmp], 1b \n" + "3: \n" + " .insn \n" + " .section .fixup,\"ax\" \n" + "4: li %[err], %[efault] \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "STR(PTR)" 1b, 4b \n" + " "STR(PTR)" 2b, 4b \n" + " .previous \n" + " .set pop \n" + : [old] "=&r" (old), + [err] "=&r" (err), + [tmp] "=&r" (tmp) + : [addr] "r" (addr), + [new] "r" (new), + [efault] "i" (-EFAULT) + : "memory"); + } else if (cpu_has_llsc) { + __asm__ __volatile__ ( + " .set push \n" + " .set "MIPS_ISA_ARCH_LEVEL" \n" + " li %[err], 0 \n" + "1: \n" + " " __SYNC(full, loongson3_war) " \n" + user_ll("%[old]", "(%[addr])") + " move %[tmp], %[new] \n" + "2: \n" + user_sc("%[tmp]", "(%[addr])") + " beqz %[tmp], 1b \n" + "3: \n" + " .insn \n" + " .section .fixup,\"ax\" \n" + "5: li %[err], %[efault] \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " "STR(PTR)" 1b, 5b \n" + " "STR(PTR)" 2b, 5b \n" + " .previous \n" + " .set pop \n" + : [old] "=&r" (old), + [err] "=&r" (err), + [tmp] "=&r" (tmp) + : [addr] "r" (addr), + [new] "r" (new), + [efault] "i" (-EFAULT) + : "memory"); + } else { + do { + preempt_disable(); + ll_bit = 1; + ll_task = current; + preempt_enable(); + + err = __get_user(old, (unsigned int *) addr); + err |= __put_user(new, (unsigned int *) addr); + if (err) + break; + rmb(); + } while (!ll_bit); + } + + if (unlikely(err)) + return err; + + regs = current_pt_regs(); + regs->regs[2] = old; + regs->regs[7] = 0; /* No error */ + + /* + * Don't let your children do this ... + */ + __asm__ __volatile__( + " move $29, %0 \n" + " j syscall_exit \n" + : /* no outputs */ + : "r" (regs)); + + /* unreached. Honestly. */ + unreachable(); +} + +/* + * mips_atomic_set() normally returns directly via syscall_exit potentially + * clobbering static registers, so be sure to preserve them. + */ +save_static_function(sys_sysmips); + +SYSCALL_DEFINE3(sysmips, long, cmd, long, arg1, long, arg2) +{ + switch (cmd) { + case MIPS_ATOMIC_SET: + return mips_atomic_set(arg1, arg2); + + case MIPS_FIXADE: + if (arg1 & ~3) + return -EINVAL; + + if (arg1 & 1) + set_thread_flag(TIF_FIXADE); + else + clear_thread_flag(TIF_FIXADE); + if (arg1 & 2) + set_thread_flag(TIF_LOGADE); + else + clear_thread_flag(TIF_LOGADE); + + return 0; + + case FLUSH_CACHE: + __flush_cache_all(); + return 0; + } + + return -EINVAL; +} + +/* + * No implemented yet ... + */ +SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op) +{ + return -ENOSYS; +} diff --git a/arch/mips/kernel/syscalls/Makefile b/arch/mips/kernel/syscalls/Makefile new file mode 100644 index 000000000..6efb2f688 --- /dev/null +++ b/arch/mips/kernel/syscalls/Makefile @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0 +kapi := arch/$(SRCARCH)/include/generated/asm +uapi := arch/$(SRCARCH)/include/generated/uapi/asm + +_dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)') \ + $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)') + +syscalln32 := $(srctree)/$(src)/syscall_n32.tbl +syscalln64 := $(srctree)/$(src)/syscall_n64.tbl +syscallo32 := $(srctree)/$(src)/syscall_o32.tbl +syshdr := $(srctree)/$(src)/syscallhdr.sh +sysnr := $(srctree)/$(src)/syscallnr.sh +systbl := $(srctree)/$(src)/syscalltbl.sh + +quiet_cmd_syshdr = SYSHDR $@ + cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@' \ + '$(syshdr_abis_$(basetarget))' \ + '$(syshdr_pfx_$(basetarget))' \ + '$(syshdr_offset_$(basetarget))' + +quiet_cmd_sysnr = SYSNR $@ + cmd_sysnr = $(CONFIG_SHELL) '$(sysnr)' '$<' '$@' \ + '$(sysnr_abis_$(basetarget))' \ + '$(sysnr_pfx_$(basetarget))' \ + '$(sysnr_offset_$(basetarget))' + +quiet_cmd_systbl = SYSTBL $@ + cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@' \ + '$(systbl_abis_$(basetarget))' \ + '$(systbl_abi_$(basetarget))' \ + '$(systbl_offset_$(basetarget))' + +syshdr_offset_unistd_n32 := __NR_Linux +$(uapi)/unistd_n32.h: $(syscalln32) $(syshdr) + $(call if_changed,syshdr) + +syshdr_offset_unistd_n64 := __NR_Linux +$(uapi)/unistd_n64.h: $(syscalln64) $(syshdr) + $(call if_changed,syshdr) + +syshdr_offset_unistd_o32 := __NR_Linux +$(uapi)/unistd_o32.h: $(syscallo32) $(syshdr) + $(call if_changed,syshdr) + +sysnr_pfx_unistd_nr_n32 := N32 +sysnr_offset_unistd_nr_n32 := 6000 +$(uapi)/unistd_nr_n32.h: $(syscalln32) $(sysnr) + $(call if_changed,sysnr) + +sysnr_pfx_unistd_nr_n64 := 64 +sysnr_offset_unistd_nr_n64 := 5000 +$(uapi)/unistd_nr_n64.h: $(syscalln64) $(sysnr) + $(call if_changed,sysnr) + +sysnr_pfx_unistd_nr_o32 := O32 +sysnr_offset_unistd_nr_o32 := 4000 +$(uapi)/unistd_nr_o32.h: $(syscallo32) $(sysnr) + $(call if_changed,sysnr) + +systbl_abi_syscall_table_32_o32 := 32_o32 +systbl_offset_syscall_table_32_o32 := 4000 +$(kapi)/syscall_table_32_o32.h: $(syscallo32) $(systbl) + $(call if_changed,systbl) + +systbl_abi_syscall_table_64_n32 := 64_n32 +systbl_offset_syscall_table_64_n32 := 6000 +$(kapi)/syscall_table_64_n32.h: $(syscalln32) $(systbl) + $(call if_changed,systbl) + +systbl_abi_syscall_table_64_n64 := 64_n64 +systbl_offset_syscall_table_64_n64 := 5000 +$(kapi)/syscall_table_64_n64.h: $(syscalln64) $(systbl) + $(call if_changed,systbl) + +systbl_abi_syscall_table_64_o32 := 64_o32 +systbl_offset_syscall_table_64_o32 := 4000 +$(kapi)/syscall_table_64_o32.h: $(syscallo32) $(systbl) + $(call if_changed,systbl) + +uapisyshdr-y += unistd_n32.h \ + unistd_n64.h \ + unistd_o32.h \ + unistd_nr_n32.h \ + unistd_nr_n64.h \ + unistd_nr_o32.h +kapisyshdr-y += syscall_table_32_o32.h \ + syscall_table_64_n32.h \ + syscall_table_64_n64.h \ + syscall_table_64_o32.h + +targets += $(uapisyshdr-y) $(kapisyshdr-y) + +PHONY += all +all: $(addprefix $(uapi)/,$(uapisyshdr-y)) +all: $(addprefix $(kapi)/,$(kapisyshdr-y)) + @: diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl new file mode 100644 index 000000000..32817c954 --- /dev/null +++ b/arch/mips/kernel/syscalls/syscall_n32.tbl @@ -0,0 +1,381 @@ +# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note +# +# system call numbers and entry vectors for mips +# +# The format is: +# <number> <abi> <name> <entry point> <compat entry point> +# +# The <abi> is always "n32" for this file. +# +0 n32 read sys_read +1 n32 write sys_write +2 n32 open sys_open +3 n32 close sys_close +4 n32 stat sys_newstat +5 n32 fstat sys_newfstat +6 n32 lstat sys_newlstat +7 n32 poll sys_poll +8 n32 lseek sys_lseek +9 n32 mmap sys_mips_mmap +10 n32 mprotect sys_mprotect +11 n32 munmap sys_munmap +12 n32 brk sys_brk +13 n32 rt_sigaction compat_sys_rt_sigaction +14 n32 rt_sigprocmask compat_sys_rt_sigprocmask +15 n32 ioctl compat_sys_ioctl +16 n32 pread64 sys_pread64 +17 n32 pwrite64 sys_pwrite64 +18 n32 readv sys_readv +19 n32 writev sys_writev +20 n32 access sys_access +21 n32 pipe sysm_pipe +22 n32 _newselect compat_sys_select +23 n32 sched_yield sys_sched_yield +24 n32 mremap sys_mremap +25 n32 msync sys_msync +26 n32 mincore sys_mincore +27 n32 madvise sys_madvise +28 n32 shmget sys_shmget +29 n32 shmat sys_shmat +30 n32 shmctl compat_sys_old_shmctl +31 n32 dup sys_dup +32 n32 dup2 sys_dup2 +33 n32 pause sys_pause +34 n32 nanosleep sys_nanosleep_time32 +35 n32 getitimer compat_sys_getitimer +36 n32 setitimer compat_sys_setitimer +37 n32 alarm sys_alarm +38 n32 getpid sys_getpid +39 n32 sendfile compat_sys_sendfile +40 n32 socket sys_socket +41 n32 connect sys_connect +42 n32 accept sys_accept +43 n32 sendto sys_sendto +44 n32 recvfrom compat_sys_recvfrom +45 n32 sendmsg compat_sys_sendmsg +46 n32 recvmsg compat_sys_recvmsg +47 n32 shutdown sys_shutdown +48 n32 bind sys_bind +49 n32 listen sys_listen +50 n32 getsockname sys_getsockname +51 n32 getpeername sys_getpeername +52 n32 socketpair sys_socketpair +53 n32 setsockopt sys_setsockopt +54 n32 getsockopt sys_getsockopt +55 n32 clone __sys_clone +56 n32 fork __sys_fork +57 n32 execve compat_sys_execve +58 n32 exit sys_exit +59 n32 wait4 compat_sys_wait4 +60 n32 kill sys_kill +61 n32 uname sys_newuname +62 n32 semget sys_semget +63 n32 semop sys_semop +64 n32 semctl compat_sys_old_semctl +65 n32 shmdt sys_shmdt +66 n32 msgget sys_msgget +67 n32 msgsnd compat_sys_msgsnd +68 n32 msgrcv compat_sys_msgrcv +69 n32 msgctl compat_sys_old_msgctl +70 n32 fcntl compat_sys_fcntl +71 n32 flock sys_flock +72 n32 fsync sys_fsync +73 n32 fdatasync sys_fdatasync +74 n32 truncate sys_truncate +75 n32 ftruncate sys_ftruncate +76 n32 getdents compat_sys_getdents +77 n32 getcwd sys_getcwd +78 n32 chdir sys_chdir +79 n32 fchdir sys_fchdir +80 n32 rename sys_rename +81 n32 mkdir sys_mkdir +82 n32 rmdir sys_rmdir +83 n32 creat sys_creat +84 n32 link sys_link +85 n32 unlink sys_unlink +86 n32 symlink sys_symlink +87 n32 readlink sys_readlink +88 n32 chmod sys_chmod +89 n32 fchmod sys_fchmod +90 n32 chown sys_chown +91 n32 fchown sys_fchown +92 n32 lchown sys_lchown +93 n32 umask sys_umask +94 n32 gettimeofday compat_sys_gettimeofday +95 n32 getrlimit compat_sys_getrlimit +96 n32 getrusage compat_sys_getrusage +97 n32 sysinfo compat_sys_sysinfo +98 n32 times compat_sys_times +99 n32 ptrace compat_sys_ptrace +100 n32 getuid sys_getuid +101 n32 syslog sys_syslog +102 n32 getgid sys_getgid +103 n32 setuid sys_setuid +104 n32 setgid sys_setgid +105 n32 geteuid sys_geteuid +106 n32 getegid sys_getegid +107 n32 setpgid sys_setpgid +108 n32 getppid sys_getppid +109 n32 getpgrp sys_getpgrp +110 n32 setsid sys_setsid +111 n32 setreuid sys_setreuid +112 n32 setregid sys_setregid +113 n32 getgroups sys_getgroups +114 n32 setgroups sys_setgroups +115 n32 setresuid sys_setresuid +116 n32 getresuid sys_getresuid +117 n32 setresgid sys_setresgid +118 n32 getresgid sys_getresgid +119 n32 getpgid sys_getpgid +120 n32 setfsuid sys_setfsuid +121 n32 setfsgid sys_setfsgid +122 n32 getsid sys_getsid +123 n32 capget sys_capget +124 n32 capset sys_capset +125 n32 rt_sigpending compat_sys_rt_sigpending +126 n32 rt_sigtimedwait compat_sys_rt_sigtimedwait_time32 +127 n32 rt_sigqueueinfo compat_sys_rt_sigqueueinfo +128 n32 rt_sigsuspend compat_sys_rt_sigsuspend +129 n32 sigaltstack compat_sys_sigaltstack +130 n32 utime sys_utime32 +131 n32 mknod sys_mknod +132 n32 personality sys_32_personality +133 n32 ustat compat_sys_ustat +134 n32 statfs compat_sys_statfs +135 n32 fstatfs compat_sys_fstatfs +136 n32 sysfs sys_sysfs +137 n32 getpriority sys_getpriority +138 n32 setpriority sys_setpriority +139 n32 sched_setparam sys_sched_setparam +140 n32 sched_getparam sys_sched_getparam +141 n32 sched_setscheduler sys_sched_setscheduler +142 n32 sched_getscheduler sys_sched_getscheduler +143 n32 sched_get_priority_max sys_sched_get_priority_max +144 n32 sched_get_priority_min sys_sched_get_priority_min +145 n32 sched_rr_get_interval sys_sched_rr_get_interval_time32 +146 n32 mlock sys_mlock +147 n32 munlock sys_munlock +148 n32 mlockall sys_mlockall +149 n32 munlockall sys_munlockall +150 n32 vhangup sys_vhangup +151 n32 pivot_root sys_pivot_root +152 n32 _sysctl sys_ni_syscall +153 n32 prctl sys_prctl +154 n32 adjtimex sys_adjtimex_time32 +155 n32 setrlimit compat_sys_setrlimit +156 n32 chroot sys_chroot +157 n32 sync sys_sync +158 n32 acct sys_acct +159 n32 settimeofday compat_sys_settimeofday +160 n32 mount sys_mount +161 n32 umount2 sys_umount +162 n32 swapon sys_swapon +163 n32 swapoff sys_swapoff +164 n32 reboot sys_reboot +165 n32 sethostname sys_sethostname +166 n32 setdomainname sys_setdomainname +167 n32 create_module sys_ni_syscall +168 n32 init_module sys_init_module +169 n32 delete_module sys_delete_module +170 n32 get_kernel_syms sys_ni_syscall +171 n32 query_module sys_ni_syscall +172 n32 quotactl sys_quotactl +173 n32 nfsservctl sys_ni_syscall +174 n32 getpmsg sys_ni_syscall +175 n32 putpmsg sys_ni_syscall +176 n32 afs_syscall sys_ni_syscall +# 177 reserved for security +177 n32 reserved177 sys_ni_syscall +178 n32 gettid sys_gettid +179 n32 readahead sys_readahead +180 n32 setxattr sys_setxattr +181 n32 lsetxattr sys_lsetxattr +182 n32 fsetxattr sys_fsetxattr +183 n32 getxattr sys_getxattr +184 n32 lgetxattr sys_lgetxattr +185 n32 fgetxattr sys_fgetxattr +186 n32 listxattr sys_listxattr +187 n32 llistxattr sys_llistxattr +188 n32 flistxattr sys_flistxattr +189 n32 removexattr sys_removexattr +190 n32 lremovexattr sys_lremovexattr +191 n32 fremovexattr sys_fremovexattr +192 n32 tkill sys_tkill +193 n32 reserved193 sys_ni_syscall +194 n32 futex sys_futex_time32 +195 n32 sched_setaffinity compat_sys_sched_setaffinity +196 n32 sched_getaffinity compat_sys_sched_getaffinity +197 n32 cacheflush sys_cacheflush +198 n32 cachectl sys_cachectl +199 n32 sysmips __sys_sysmips +200 n32 io_setup compat_sys_io_setup +201 n32 io_destroy sys_io_destroy +202 n32 io_getevents sys_io_getevents_time32 +203 n32 io_submit compat_sys_io_submit +204 n32 io_cancel sys_io_cancel +205 n32 exit_group sys_exit_group +206 n32 lookup_dcookie sys_lookup_dcookie +207 n32 epoll_create sys_epoll_create +208 n32 epoll_ctl sys_epoll_ctl +209 n32 epoll_wait sys_epoll_wait +210 n32 remap_file_pages sys_remap_file_pages +211 n32 rt_sigreturn sysn32_rt_sigreturn +212 n32 fcntl64 compat_sys_fcntl64 +213 n32 set_tid_address sys_set_tid_address +214 n32 restart_syscall sys_restart_syscall +215 n32 semtimedop sys_semtimedop_time32 +216 n32 fadvise64 sys_fadvise64_64 +217 n32 statfs64 compat_sys_statfs64 +218 n32 fstatfs64 compat_sys_fstatfs64 +219 n32 sendfile64 sys_sendfile64 +220 n32 timer_create compat_sys_timer_create +221 n32 timer_settime sys_timer_settime32 +222 n32 timer_gettime sys_timer_gettime32 +223 n32 timer_getoverrun sys_timer_getoverrun +224 n32 timer_delete sys_timer_delete +225 n32 clock_settime sys_clock_settime32 +226 n32 clock_gettime sys_clock_gettime32 +227 n32 clock_getres sys_clock_getres_time32 +228 n32 clock_nanosleep sys_clock_nanosleep_time32 +229 n32 tgkill sys_tgkill +230 n32 utimes sys_utimes_time32 +231 n32 mbind compat_sys_mbind +232 n32 get_mempolicy compat_sys_get_mempolicy +233 n32 set_mempolicy compat_sys_set_mempolicy +234 n32 mq_open compat_sys_mq_open +235 n32 mq_unlink sys_mq_unlink +236 n32 mq_timedsend sys_mq_timedsend_time32 +237 n32 mq_timedreceive sys_mq_timedreceive_time32 +238 n32 mq_notify compat_sys_mq_notify +239 n32 mq_getsetattr compat_sys_mq_getsetattr +240 n32 vserver sys_ni_syscall +241 n32 waitid compat_sys_waitid +# 242 was sys_setaltroot +243 n32 add_key sys_add_key +244 n32 request_key sys_request_key +245 n32 keyctl compat_sys_keyctl +246 n32 set_thread_area sys_set_thread_area +247 n32 inotify_init sys_inotify_init +248 n32 inotify_add_watch sys_inotify_add_watch +249 n32 inotify_rm_watch sys_inotify_rm_watch +250 n32 migrate_pages compat_sys_migrate_pages +251 n32 openat sys_openat +252 n32 mkdirat sys_mkdirat +253 n32 mknodat sys_mknodat +254 n32 fchownat sys_fchownat +255 n32 futimesat sys_futimesat_time32 +256 n32 newfstatat sys_newfstatat +257 n32 unlinkat sys_unlinkat +258 n32 renameat sys_renameat +259 n32 linkat sys_linkat +260 n32 symlinkat sys_symlinkat +261 n32 readlinkat sys_readlinkat +262 n32 fchmodat sys_fchmodat +263 n32 faccessat sys_faccessat +264 n32 pselect6 compat_sys_pselect6_time32 +265 n32 ppoll compat_sys_ppoll_time32 +266 n32 unshare sys_unshare +267 n32 splice sys_splice +268 n32 sync_file_range sys_sync_file_range +269 n32 tee sys_tee +270 n32 vmsplice sys_vmsplice +271 n32 move_pages compat_sys_move_pages +272 n32 set_robust_list compat_sys_set_robust_list +273 n32 get_robust_list compat_sys_get_robust_list +274 n32 kexec_load compat_sys_kexec_load +275 n32 getcpu sys_getcpu +276 n32 epoll_pwait compat_sys_epoll_pwait +277 n32 ioprio_set sys_ioprio_set +278 n32 ioprio_get sys_ioprio_get +279 n32 utimensat sys_utimensat_time32 +280 n32 signalfd compat_sys_signalfd +281 n32 timerfd sys_ni_syscall +282 n32 eventfd sys_eventfd +283 n32 fallocate sys_fallocate +284 n32 timerfd_create sys_timerfd_create +285 n32 timerfd_gettime sys_timerfd_gettime32 +286 n32 timerfd_settime sys_timerfd_settime32 +287 n32 signalfd4 compat_sys_signalfd4 +288 n32 eventfd2 sys_eventfd2 +289 n32 epoll_create1 sys_epoll_create1 +290 n32 dup3 sys_dup3 +291 n32 pipe2 sys_pipe2 +292 n32 inotify_init1 sys_inotify_init1 +293 n32 preadv compat_sys_preadv +294 n32 pwritev compat_sys_pwritev +295 n32 rt_tgsigqueueinfo compat_sys_rt_tgsigqueueinfo +296 n32 perf_event_open sys_perf_event_open +297 n32 accept4 sys_accept4 +298 n32 recvmmsg compat_sys_recvmmsg_time32 +299 n32 getdents64 sys_getdents64 +300 n32 fanotify_init sys_fanotify_init +301 n32 fanotify_mark sys_fanotify_mark +302 n32 prlimit64 sys_prlimit64 +303 n32 name_to_handle_at sys_name_to_handle_at +304 n32 open_by_handle_at sys_open_by_handle_at +305 n32 clock_adjtime sys_clock_adjtime32 +306 n32 syncfs sys_syncfs +307 n32 sendmmsg compat_sys_sendmmsg +308 n32 setns sys_setns +309 n32 process_vm_readv sys_process_vm_readv +310 n32 process_vm_writev sys_process_vm_writev +311 n32 kcmp sys_kcmp +312 n32 finit_module sys_finit_module +313 n32 sched_setattr sys_sched_setattr +314 n32 sched_getattr sys_sched_getattr +315 n32 renameat2 sys_renameat2 +316 n32 seccomp sys_seccomp +317 n32 getrandom sys_getrandom +318 n32 memfd_create sys_memfd_create +319 n32 bpf sys_bpf +320 n32 execveat compat_sys_execveat +321 n32 userfaultfd sys_userfaultfd +322 n32 membarrier sys_membarrier +323 n32 mlock2 sys_mlock2 +324 n32 copy_file_range sys_copy_file_range +325 n32 preadv2 compat_sys_preadv2 +326 n32 pwritev2 compat_sys_pwritev2 +327 n32 pkey_mprotect sys_pkey_mprotect +328 n32 pkey_alloc sys_pkey_alloc +329 n32 pkey_free sys_pkey_free +330 n32 statx sys_statx +331 n32 rseq sys_rseq +332 n32 io_pgetevents compat_sys_io_pgetevents +# 333 through 402 are unassigned to sync up with generic numbers +403 n32 clock_gettime64 sys_clock_gettime +404 n32 clock_settime64 sys_clock_settime +405 n32 clock_adjtime64 sys_clock_adjtime +406 n32 clock_getres_time64 sys_clock_getres +407 n32 clock_nanosleep_time64 sys_clock_nanosleep +408 n32 timer_gettime64 sys_timer_gettime +409 n32 timer_settime64 sys_timer_settime +410 n32 timerfd_gettime64 sys_timerfd_gettime +411 n32 timerfd_settime64 sys_timerfd_settime +412 n32 utimensat_time64 sys_utimensat +413 n32 pselect6_time64 compat_sys_pselect6_time64 +414 n32 ppoll_time64 compat_sys_ppoll_time64 +416 n32 io_pgetevents_time64 sys_io_pgetevents +417 n32 recvmmsg_time64 compat_sys_recvmmsg_time64 +418 n32 mq_timedsend_time64 sys_mq_timedsend +419 n32 mq_timedreceive_time64 sys_mq_timedreceive +420 n32 semtimedop_time64 sys_semtimedop +421 n32 rt_sigtimedwait_time64 compat_sys_rt_sigtimedwait_time64 +422 n32 futex_time64 sys_futex +423 n32 sched_rr_get_interval_time64 sys_sched_rr_get_interval +424 n32 pidfd_send_signal sys_pidfd_send_signal +425 n32 io_uring_setup sys_io_uring_setup +426 n32 io_uring_enter sys_io_uring_enter +427 n32 io_uring_register sys_io_uring_register +428 n32 open_tree sys_open_tree +429 n32 move_mount sys_move_mount +430 n32 fsopen sys_fsopen +431 n32 fsconfig sys_fsconfig +432 n32 fsmount sys_fsmount +433 n32 fspick sys_fspick +434 n32 pidfd_open sys_pidfd_open +435 n32 clone3 __sys_clone3 +436 n32 close_range sys_close_range +437 n32 openat2 sys_openat2 +438 n32 pidfd_getfd sys_pidfd_getfd +439 n32 faccessat2 sys_faccessat2 +440 n32 process_madvise sys_process_madvise diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl new file mode 100644 index 000000000..9e4ea3c31 --- /dev/null +++ b/arch/mips/kernel/syscalls/syscall_n64.tbl @@ -0,0 +1,357 @@ +# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note +# +# system call numbers and entry vectors for mips +# +# The format is: +# <number> <abi> <name> <entry point> +# +# The <abi> is always "n64" for this file. +# +0 n64 read sys_read +1 n64 write sys_write +2 n64 open sys_open +3 n64 close sys_close +4 n64 stat sys_newstat +5 n64 fstat sys_newfstat +6 n64 lstat sys_newlstat +7 n64 poll sys_poll +8 n64 lseek sys_lseek +9 n64 mmap sys_mips_mmap +10 n64 mprotect sys_mprotect +11 n64 munmap sys_munmap +12 n64 brk sys_brk +13 n64 rt_sigaction sys_rt_sigaction +14 n64 rt_sigprocmask sys_rt_sigprocmask +15 n64 ioctl sys_ioctl +16 n64 pread64 sys_pread64 +17 n64 pwrite64 sys_pwrite64 +18 n64 readv sys_readv +19 n64 writev sys_writev +20 n64 access sys_access +21 n64 pipe sysm_pipe +22 n64 _newselect sys_select +23 n64 sched_yield sys_sched_yield +24 n64 mremap sys_mremap +25 n64 msync sys_msync +26 n64 mincore sys_mincore +27 n64 madvise sys_madvise +28 n64 shmget sys_shmget +29 n64 shmat sys_shmat +30 n64 shmctl sys_old_shmctl +31 n64 dup sys_dup +32 n64 dup2 sys_dup2 +33 n64 pause sys_pause +34 n64 nanosleep sys_nanosleep +35 n64 getitimer sys_getitimer +36 n64 setitimer sys_setitimer +37 n64 alarm sys_alarm +38 n64 getpid sys_getpid +39 n64 sendfile sys_sendfile64 +40 n64 socket sys_socket +41 n64 connect sys_connect +42 n64 accept sys_accept +43 n64 sendto sys_sendto +44 n64 recvfrom sys_recvfrom +45 n64 sendmsg sys_sendmsg +46 n64 recvmsg sys_recvmsg +47 n64 shutdown sys_shutdown +48 n64 bind sys_bind +49 n64 listen sys_listen +50 n64 getsockname sys_getsockname +51 n64 getpeername sys_getpeername +52 n64 socketpair sys_socketpair +53 n64 setsockopt sys_setsockopt +54 n64 getsockopt sys_getsockopt +55 n64 clone __sys_clone +56 n64 fork __sys_fork +57 n64 execve sys_execve +58 n64 exit sys_exit +59 n64 wait4 sys_wait4 +60 n64 kill sys_kill +61 n64 uname sys_newuname +62 n64 semget sys_semget +63 n64 semop sys_semop +64 n64 semctl sys_old_semctl +65 n64 shmdt sys_shmdt +66 n64 msgget sys_msgget +67 n64 msgsnd sys_msgsnd +68 n64 msgrcv sys_msgrcv +69 n64 msgctl sys_old_msgctl +70 n64 fcntl sys_fcntl +71 n64 flock sys_flock +72 n64 fsync sys_fsync +73 n64 fdatasync sys_fdatasync +74 n64 truncate sys_truncate +75 n64 ftruncate sys_ftruncate +76 n64 getdents sys_getdents +77 n64 getcwd sys_getcwd +78 n64 chdir sys_chdir +79 n64 fchdir sys_fchdir +80 n64 rename sys_rename +81 n64 mkdir sys_mkdir +82 n64 rmdir sys_rmdir +83 n64 creat sys_creat +84 n64 link sys_link +85 n64 unlink sys_unlink +86 n64 symlink sys_symlink +87 n64 readlink sys_readlink +88 n64 chmod sys_chmod +89 n64 fchmod sys_fchmod +90 n64 chown sys_chown +91 n64 fchown sys_fchown +92 n64 lchown sys_lchown +93 n64 umask sys_umask +94 n64 gettimeofday sys_gettimeofday +95 n64 getrlimit sys_getrlimit +96 n64 getrusage sys_getrusage +97 n64 sysinfo sys_sysinfo +98 n64 times sys_times +99 n64 ptrace sys_ptrace +100 n64 getuid sys_getuid +101 n64 syslog sys_syslog +102 n64 getgid sys_getgid +103 n64 setuid sys_setuid +104 n64 setgid sys_setgid +105 n64 geteuid sys_geteuid +106 n64 getegid sys_getegid +107 n64 setpgid sys_setpgid +108 n64 getppid sys_getppid +109 n64 getpgrp sys_getpgrp +110 n64 setsid sys_setsid +111 n64 setreuid sys_setreuid +112 n64 setregid sys_setregid +113 n64 getgroups sys_getgroups +114 n64 setgroups sys_setgroups +115 n64 setresuid sys_setresuid +116 n64 getresuid sys_getresuid +117 n64 setresgid sys_setresgid +118 n64 getresgid sys_getresgid +119 n64 getpgid sys_getpgid +120 n64 setfsuid sys_setfsuid +121 n64 setfsgid sys_setfsgid +122 n64 getsid sys_getsid +123 n64 capget sys_capget +124 n64 capset sys_capset +125 n64 rt_sigpending sys_rt_sigpending +126 n64 rt_sigtimedwait sys_rt_sigtimedwait +127 n64 rt_sigqueueinfo sys_rt_sigqueueinfo +128 n64 rt_sigsuspend sys_rt_sigsuspend +129 n64 sigaltstack sys_sigaltstack +130 n64 utime sys_utime +131 n64 mknod sys_mknod +132 n64 personality sys_personality +133 n64 ustat sys_ustat +134 n64 statfs sys_statfs +135 n64 fstatfs sys_fstatfs +136 n64 sysfs sys_sysfs +137 n64 getpriority sys_getpriority +138 n64 setpriority sys_setpriority +139 n64 sched_setparam sys_sched_setparam +140 n64 sched_getparam sys_sched_getparam +141 n64 sched_setscheduler sys_sched_setscheduler +142 n64 sched_getscheduler sys_sched_getscheduler +143 n64 sched_get_priority_max sys_sched_get_priority_max +144 n64 sched_get_priority_min sys_sched_get_priority_min +145 n64 sched_rr_get_interval sys_sched_rr_get_interval +146 n64 mlock sys_mlock +147 n64 munlock sys_munlock +148 n64 mlockall sys_mlockall +149 n64 munlockall sys_munlockall +150 n64 vhangup sys_vhangup +151 n64 pivot_root sys_pivot_root +152 n64 _sysctl sys_ni_syscall +153 n64 prctl sys_prctl +154 n64 adjtimex sys_adjtimex +155 n64 setrlimit sys_setrlimit +156 n64 chroot sys_chroot +157 n64 sync sys_sync +158 n64 acct sys_acct +159 n64 settimeofday sys_settimeofday +160 n64 mount sys_mount +161 n64 umount2 sys_umount +162 n64 swapon sys_swapon +163 n64 swapoff sys_swapoff +164 n64 reboot sys_reboot +165 n64 sethostname sys_sethostname +166 n64 setdomainname sys_setdomainname +167 n64 create_module sys_ni_syscall +168 n64 init_module sys_init_module +169 n64 delete_module sys_delete_module +170 n64 get_kernel_syms sys_ni_syscall +171 n64 query_module sys_ni_syscall +172 n64 quotactl sys_quotactl +173 n64 nfsservctl sys_ni_syscall +174 n64 getpmsg sys_ni_syscall +175 n64 putpmsg sys_ni_syscall +176 n64 afs_syscall sys_ni_syscall +# 177 reserved for security +177 n64 reserved177 sys_ni_syscall +178 n64 gettid sys_gettid +179 n64 readahead sys_readahead +180 n64 setxattr sys_setxattr +181 n64 lsetxattr sys_lsetxattr +182 n64 fsetxattr sys_fsetxattr +183 n64 getxattr sys_getxattr +184 n64 lgetxattr sys_lgetxattr +185 n64 fgetxattr sys_fgetxattr +186 n64 listxattr sys_listxattr +187 n64 llistxattr sys_llistxattr +188 n64 flistxattr sys_flistxattr +189 n64 removexattr sys_removexattr +190 n64 lremovexattr sys_lremovexattr +191 n64 fremovexattr sys_fremovexattr +192 n64 tkill sys_tkill +193 n64 reserved193 sys_ni_syscall +194 n64 futex sys_futex +195 n64 sched_setaffinity sys_sched_setaffinity +196 n64 sched_getaffinity sys_sched_getaffinity +197 n64 cacheflush sys_cacheflush +198 n64 cachectl sys_cachectl +199 n64 sysmips __sys_sysmips +200 n64 io_setup sys_io_setup +201 n64 io_destroy sys_io_destroy +202 n64 io_getevents sys_io_getevents +203 n64 io_submit sys_io_submit +204 n64 io_cancel sys_io_cancel +205 n64 exit_group sys_exit_group +206 n64 lookup_dcookie sys_lookup_dcookie +207 n64 epoll_create sys_epoll_create +208 n64 epoll_ctl sys_epoll_ctl +209 n64 epoll_wait sys_epoll_wait +210 n64 remap_file_pages sys_remap_file_pages +211 n64 rt_sigreturn sys_rt_sigreturn +212 n64 set_tid_address sys_set_tid_address +213 n64 restart_syscall sys_restart_syscall +214 n64 semtimedop sys_semtimedop +215 n64 fadvise64 sys_fadvise64_64 +216 n64 timer_create sys_timer_create +217 n64 timer_settime sys_timer_settime +218 n64 timer_gettime sys_timer_gettime +219 n64 timer_getoverrun sys_timer_getoverrun +220 n64 timer_delete sys_timer_delete +221 n64 clock_settime sys_clock_settime +222 n64 clock_gettime sys_clock_gettime +223 n64 clock_getres sys_clock_getres +224 n64 clock_nanosleep sys_clock_nanosleep +225 n64 tgkill sys_tgkill +226 n64 utimes sys_utimes +227 n64 mbind sys_mbind +228 n64 get_mempolicy sys_get_mempolicy +229 n64 set_mempolicy sys_set_mempolicy +230 n64 mq_open sys_mq_open +231 n64 mq_unlink sys_mq_unlink +232 n64 mq_timedsend sys_mq_timedsend +233 n64 mq_timedreceive sys_mq_timedreceive +234 n64 mq_notify sys_mq_notify +235 n64 mq_getsetattr sys_mq_getsetattr +236 n64 vserver sys_ni_syscall +237 n64 waitid sys_waitid +# 238 was sys_setaltroot +239 n64 add_key sys_add_key +240 n64 request_key sys_request_key +241 n64 keyctl sys_keyctl +242 n64 set_thread_area sys_set_thread_area +243 n64 inotify_init sys_inotify_init +244 n64 inotify_add_watch sys_inotify_add_watch +245 n64 inotify_rm_watch sys_inotify_rm_watch +246 n64 migrate_pages sys_migrate_pages +247 n64 openat sys_openat +248 n64 mkdirat sys_mkdirat +249 n64 mknodat sys_mknodat +250 n64 fchownat sys_fchownat +251 n64 futimesat sys_futimesat +252 n64 newfstatat sys_newfstatat +253 n64 unlinkat sys_unlinkat +254 n64 renameat sys_renameat +255 n64 linkat sys_linkat +256 n64 symlinkat sys_symlinkat +257 n64 readlinkat sys_readlinkat +258 n64 fchmodat sys_fchmodat +259 n64 faccessat sys_faccessat +260 n64 pselect6 sys_pselect6 +261 n64 ppoll sys_ppoll +262 n64 unshare sys_unshare +263 n64 splice sys_splice +264 n64 sync_file_range sys_sync_file_range +265 n64 tee sys_tee +266 n64 vmsplice sys_vmsplice +267 n64 move_pages sys_move_pages +268 n64 set_robust_list sys_set_robust_list +269 n64 get_robust_list sys_get_robust_list +270 n64 kexec_load sys_kexec_load +271 n64 getcpu sys_getcpu +272 n64 epoll_pwait sys_epoll_pwait +273 n64 ioprio_set sys_ioprio_set +274 n64 ioprio_get sys_ioprio_get +275 n64 utimensat sys_utimensat +276 n64 signalfd sys_signalfd +277 n64 timerfd sys_ni_syscall +278 n64 eventfd sys_eventfd +279 n64 fallocate sys_fallocate +280 n64 timerfd_create sys_timerfd_create +281 n64 timerfd_gettime sys_timerfd_gettime +282 n64 timerfd_settime sys_timerfd_settime +283 n64 signalfd4 sys_signalfd4 +284 n64 eventfd2 sys_eventfd2 +285 n64 epoll_create1 sys_epoll_create1 +286 n64 dup3 sys_dup3 +287 n64 pipe2 sys_pipe2 +288 n64 inotify_init1 sys_inotify_init1 +289 n64 preadv sys_preadv +290 n64 pwritev sys_pwritev +291 n64 rt_tgsigqueueinfo sys_rt_tgsigqueueinfo +292 n64 perf_event_open sys_perf_event_open +293 n64 accept4 sys_accept4 +294 n64 recvmmsg sys_recvmmsg +295 n64 fanotify_init sys_fanotify_init +296 n64 fanotify_mark sys_fanotify_mark +297 n64 prlimit64 sys_prlimit64 +298 n64 name_to_handle_at sys_name_to_handle_at +299 n64 open_by_handle_at sys_open_by_handle_at +300 n64 clock_adjtime sys_clock_adjtime +301 n64 syncfs sys_syncfs +302 n64 sendmmsg sys_sendmmsg +303 n64 setns sys_setns +304 n64 process_vm_readv sys_process_vm_readv +305 n64 process_vm_writev sys_process_vm_writev +306 n64 kcmp sys_kcmp +307 n64 finit_module sys_finit_module +308 n64 getdents64 sys_getdents64 +309 n64 sched_setattr sys_sched_setattr +310 n64 sched_getattr sys_sched_getattr +311 n64 renameat2 sys_renameat2 +312 n64 seccomp sys_seccomp +313 n64 getrandom sys_getrandom +314 n64 memfd_create sys_memfd_create +315 n64 bpf sys_bpf +316 n64 execveat sys_execveat +317 n64 userfaultfd sys_userfaultfd +318 n64 membarrier sys_membarrier +319 n64 mlock2 sys_mlock2 +320 n64 copy_file_range sys_copy_file_range +321 n64 preadv2 sys_preadv2 +322 n64 pwritev2 sys_pwritev2 +323 n64 pkey_mprotect sys_pkey_mprotect +324 n64 pkey_alloc sys_pkey_alloc +325 n64 pkey_free sys_pkey_free +326 n64 statx sys_statx +327 n64 rseq sys_rseq +328 n64 io_pgetevents sys_io_pgetevents +# 329 through 423 are reserved to sync up with other architectures +424 n64 pidfd_send_signal sys_pidfd_send_signal +425 n64 io_uring_setup sys_io_uring_setup +426 n64 io_uring_enter sys_io_uring_enter +427 n64 io_uring_register sys_io_uring_register +428 n64 open_tree sys_open_tree +429 n64 move_mount sys_move_mount +430 n64 fsopen sys_fsopen +431 n64 fsconfig sys_fsconfig +432 n64 fsmount sys_fsmount +433 n64 fspick sys_fspick +434 n64 pidfd_open sys_pidfd_open +435 n64 clone3 __sys_clone3 +436 n64 close_range sys_close_range +437 n64 openat2 sys_openat2 +438 n64 pidfd_getfd sys_pidfd_getfd +439 n64 faccessat2 sys_faccessat2 +440 n64 process_madvise sys_process_madvise diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl new file mode 100644 index 000000000..29f5f28cf --- /dev/null +++ b/arch/mips/kernel/syscalls/syscall_o32.tbl @@ -0,0 +1,430 @@ +# SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note +# +# system call numbers and entry vectors for mips +# +# The format is: +# <number> <abi> <name> <entry point> <compat entry point> +# +# The <abi> is always "o32" for this file. +# +0 o32 syscall sys_syscall sys32_syscall +1 o32 exit sys_exit +2 o32 fork __sys_fork +3 o32 read sys_read +4 o32 write sys_write +5 o32 open sys_open compat_sys_open +6 o32 close sys_close +7 o32 waitpid sys_waitpid +8 o32 creat sys_creat +9 o32 link sys_link +10 o32 unlink sys_unlink +11 o32 execve sys_execve compat_sys_execve +12 o32 chdir sys_chdir +13 o32 time sys_time32 +14 o32 mknod sys_mknod +15 o32 chmod sys_chmod +16 o32 lchown sys_lchown +17 o32 break sys_ni_syscall +# 18 was sys_stat +18 o32 unused18 sys_ni_syscall +19 o32 lseek sys_lseek +20 o32 getpid sys_getpid +21 o32 mount sys_mount +22 o32 umount sys_oldumount +23 o32 setuid sys_setuid +24 o32 getuid sys_getuid +25 o32 stime sys_stime32 +26 o32 ptrace sys_ptrace compat_sys_ptrace +27 o32 alarm sys_alarm +# 28 was sys_fstat +28 o32 unused28 sys_ni_syscall +29 o32 pause sys_pause +30 o32 utime sys_utime32 +31 o32 stty sys_ni_syscall +32 o32 gtty sys_ni_syscall +33 o32 access sys_access +34 o32 nice sys_nice +35 o32 ftime sys_ni_syscall +36 o32 sync sys_sync +37 o32 kill sys_kill +38 o32 rename sys_rename +39 o32 mkdir sys_mkdir +40 o32 rmdir sys_rmdir +41 o32 dup sys_dup +42 o32 pipe sysm_pipe +43 o32 times sys_times compat_sys_times +44 o32 prof sys_ni_syscall +45 o32 brk sys_brk +46 o32 setgid sys_setgid +47 o32 getgid sys_getgid +48 o32 signal sys_ni_syscall +49 o32 geteuid sys_geteuid +50 o32 getegid sys_getegid +51 o32 acct sys_acct +52 o32 umount2 sys_umount +53 o32 lock sys_ni_syscall +54 o32 ioctl sys_ioctl compat_sys_ioctl +55 o32 fcntl sys_fcntl compat_sys_fcntl +56 o32 mpx sys_ni_syscall +57 o32 setpgid sys_setpgid +58 o32 ulimit sys_ni_syscall +59 o32 unused59 sys_olduname +60 o32 umask sys_umask +61 o32 chroot sys_chroot +62 o32 ustat sys_ustat compat_sys_ustat +63 o32 dup2 sys_dup2 +64 o32 getppid sys_getppid +65 o32 getpgrp sys_getpgrp +66 o32 setsid sys_setsid +67 o32 sigaction sys_sigaction sys_32_sigaction +68 o32 sgetmask sys_sgetmask +69 o32 ssetmask sys_ssetmask +70 o32 setreuid sys_setreuid +71 o32 setregid sys_setregid +72 o32 sigsuspend sys_sigsuspend sys32_sigsuspend +73 o32 sigpending sys_sigpending compat_sys_sigpending +74 o32 sethostname sys_sethostname +75 o32 setrlimit sys_setrlimit compat_sys_setrlimit +76 o32 getrlimit sys_getrlimit compat_sys_getrlimit +77 o32 getrusage sys_getrusage compat_sys_getrusage +78 o32 gettimeofday sys_gettimeofday compat_sys_gettimeofday +79 o32 settimeofday sys_settimeofday compat_sys_settimeofday +80 o32 getgroups sys_getgroups +81 o32 setgroups sys_setgroups +# 82 was old_select +82 o32 reserved82 sys_ni_syscall +83 o32 symlink sys_symlink +# 84 was sys_lstat +84 o32 unused84 sys_ni_syscall +85 o32 readlink sys_readlink +86 o32 uselib sys_uselib +87 o32 swapon sys_swapon +88 o32 reboot sys_reboot +89 o32 readdir sys_old_readdir compat_sys_old_readdir +90 o32 mmap sys_mips_mmap +91 o32 munmap sys_munmap +92 o32 truncate sys_truncate compat_sys_truncate +93 o32 ftruncate sys_ftruncate compat_sys_ftruncate +94 o32 fchmod sys_fchmod +95 o32 fchown sys_fchown +96 o32 getpriority sys_getpriority +97 o32 setpriority sys_setpriority +98 o32 profil sys_ni_syscall +99 o32 statfs sys_statfs compat_sys_statfs +100 o32 fstatfs sys_fstatfs compat_sys_fstatfs +101 o32 ioperm sys_ni_syscall +102 o32 socketcall sys_socketcall compat_sys_socketcall +103 o32 syslog sys_syslog +104 o32 setitimer sys_setitimer compat_sys_setitimer +105 o32 getitimer sys_getitimer compat_sys_getitimer +106 o32 stat sys_newstat compat_sys_newstat +107 o32 lstat sys_newlstat compat_sys_newlstat +108 o32 fstat sys_newfstat compat_sys_newfstat +109 o32 unused109 sys_uname +110 o32 iopl sys_ni_syscall +111 o32 vhangup sys_vhangup +112 o32 idle sys_ni_syscall +113 o32 vm86 sys_ni_syscall +114 o32 wait4 sys_wait4 compat_sys_wait4 +115 o32 swapoff sys_swapoff +116 o32 sysinfo sys_sysinfo compat_sys_sysinfo +117 o32 ipc sys_ipc compat_sys_ipc +118 o32 fsync sys_fsync +119 o32 sigreturn sys_sigreturn sys32_sigreturn +120 o32 clone __sys_clone +121 o32 setdomainname sys_setdomainname +122 o32 uname sys_newuname +123 o32 modify_ldt sys_ni_syscall +124 o32 adjtimex sys_adjtimex_time32 +125 o32 mprotect sys_mprotect +126 o32 sigprocmask sys_sigprocmask compat_sys_sigprocmask +127 o32 create_module sys_ni_syscall +128 o32 init_module sys_init_module +129 o32 delete_module sys_delete_module +130 o32 get_kernel_syms sys_ni_syscall +131 o32 quotactl sys_quotactl +132 o32 getpgid sys_getpgid +133 o32 fchdir sys_fchdir +134 o32 bdflush sys_bdflush +135 o32 sysfs sys_sysfs +136 o32 personality sys_personality sys_32_personality +137 o32 afs_syscall sys_ni_syscall +138 o32 setfsuid sys_setfsuid +139 o32 setfsgid sys_setfsgid +140 o32 _llseek sys_llseek sys_32_llseek +141 o32 getdents sys_getdents compat_sys_getdents +142 o32 _newselect sys_select compat_sys_select +143 o32 flock sys_flock +144 o32 msync sys_msync +145 o32 readv sys_readv +146 o32 writev sys_writev +147 o32 cacheflush sys_cacheflush +148 o32 cachectl sys_cachectl +149 o32 sysmips __sys_sysmips +150 o32 unused150 sys_ni_syscall +151 o32 getsid sys_getsid +152 o32 fdatasync sys_fdatasync +153 o32 _sysctl sys_ni_syscall +154 o32 mlock sys_mlock +155 o32 munlock sys_munlock +156 o32 mlockall sys_mlockall +157 o32 munlockall sys_munlockall +158 o32 sched_setparam sys_sched_setparam +159 o32 sched_getparam sys_sched_getparam +160 o32 sched_setscheduler sys_sched_setscheduler +161 o32 sched_getscheduler sys_sched_getscheduler +162 o32 sched_yield sys_sched_yield +163 o32 sched_get_priority_max sys_sched_get_priority_max +164 o32 sched_get_priority_min sys_sched_get_priority_min +165 o32 sched_rr_get_interval sys_sched_rr_get_interval_time32 +166 o32 nanosleep sys_nanosleep_time32 +167 o32 mremap sys_mremap +168 o32 accept sys_accept +169 o32 bind sys_bind +170 o32 connect sys_connect +171 o32 getpeername sys_getpeername +172 o32 getsockname sys_getsockname +173 o32 getsockopt sys_getsockopt sys_getsockopt +174 o32 listen sys_listen +175 o32 recv sys_recv compat_sys_recv +176 o32 recvfrom sys_recvfrom compat_sys_recvfrom +177 o32 recvmsg sys_recvmsg compat_sys_recvmsg +178 o32 send sys_send +179 o32 sendmsg sys_sendmsg compat_sys_sendmsg +180 o32 sendto sys_sendto +181 o32 setsockopt sys_setsockopt sys_setsockopt +182 o32 shutdown sys_shutdown +183 o32 socket sys_socket +184 o32 socketpair sys_socketpair +185 o32 setresuid sys_setresuid +186 o32 getresuid sys_getresuid +187 o32 query_module sys_ni_syscall +188 o32 poll sys_poll +189 o32 nfsservctl sys_ni_syscall +190 o32 setresgid sys_setresgid +191 o32 getresgid sys_getresgid +192 o32 prctl sys_prctl +193 o32 rt_sigreturn sys_rt_sigreturn sys32_rt_sigreturn +194 o32 rt_sigaction sys_rt_sigaction compat_sys_rt_sigaction +195 o32 rt_sigprocmask sys_rt_sigprocmask compat_sys_rt_sigprocmask +196 o32 rt_sigpending sys_rt_sigpending compat_sys_rt_sigpending +197 o32 rt_sigtimedwait sys_rt_sigtimedwait_time32 compat_sys_rt_sigtimedwait_time32 +198 o32 rt_sigqueueinfo sys_rt_sigqueueinfo compat_sys_rt_sigqueueinfo +199 o32 rt_sigsuspend sys_rt_sigsuspend compat_sys_rt_sigsuspend +200 o32 pread64 sys_pread64 sys_32_pread +201 o32 pwrite64 sys_pwrite64 sys_32_pwrite +202 o32 chown sys_chown +203 o32 getcwd sys_getcwd +204 o32 capget sys_capget +205 o32 capset sys_capset +206 o32 sigaltstack sys_sigaltstack compat_sys_sigaltstack +207 o32 sendfile sys_sendfile compat_sys_sendfile +208 o32 getpmsg sys_ni_syscall +209 o32 putpmsg sys_ni_syscall +210 o32 mmap2 sys_mips_mmap2 +211 o32 truncate64 sys_truncate64 sys_32_truncate64 +212 o32 ftruncate64 sys_ftruncate64 sys_32_ftruncate64 +213 o32 stat64 sys_stat64 sys_newstat +214 o32 lstat64 sys_lstat64 sys_newlstat +215 o32 fstat64 sys_fstat64 sys_newfstat +216 o32 pivot_root sys_pivot_root +217 o32 mincore sys_mincore +218 o32 madvise sys_madvise +219 o32 getdents64 sys_getdents64 +220 o32 fcntl64 sys_fcntl64 compat_sys_fcntl64 +221 o32 reserved221 sys_ni_syscall +222 o32 gettid sys_gettid +223 o32 readahead sys_readahead sys32_readahead +224 o32 setxattr sys_setxattr +225 o32 lsetxattr sys_lsetxattr +226 o32 fsetxattr sys_fsetxattr +227 o32 getxattr sys_getxattr +228 o32 lgetxattr sys_lgetxattr +229 o32 fgetxattr sys_fgetxattr +230 o32 listxattr sys_listxattr +231 o32 llistxattr sys_llistxattr +232 o32 flistxattr sys_flistxattr +233 o32 removexattr sys_removexattr +234 o32 lremovexattr sys_lremovexattr +235 o32 fremovexattr sys_fremovexattr +236 o32 tkill sys_tkill +237 o32 sendfile64 sys_sendfile64 +238 o32 futex sys_futex_time32 +239 o32 sched_setaffinity sys_sched_setaffinity compat_sys_sched_setaffinity +240 o32 sched_getaffinity sys_sched_getaffinity compat_sys_sched_getaffinity +241 o32 io_setup sys_io_setup compat_sys_io_setup +242 o32 io_destroy sys_io_destroy +243 o32 io_getevents sys_io_getevents_time32 +244 o32 io_submit sys_io_submit compat_sys_io_submit +245 o32 io_cancel sys_io_cancel +246 o32 exit_group sys_exit_group +247 o32 lookup_dcookie sys_lookup_dcookie compat_sys_lookup_dcookie +248 o32 epoll_create sys_epoll_create +249 o32 epoll_ctl sys_epoll_ctl +250 o32 epoll_wait sys_epoll_wait +251 o32 remap_file_pages sys_remap_file_pages +252 o32 set_tid_address sys_set_tid_address +253 o32 restart_syscall sys_restart_syscall +254 o32 fadvise64 sys_fadvise64_64 sys32_fadvise64_64 +255 o32 statfs64 sys_statfs64 compat_sys_statfs64 +256 o32 fstatfs64 sys_fstatfs64 compat_sys_fstatfs64 +257 o32 timer_create sys_timer_create compat_sys_timer_create +258 o32 timer_settime sys_timer_settime32 +259 o32 timer_gettime sys_timer_gettime32 +260 o32 timer_getoverrun sys_timer_getoverrun +261 o32 timer_delete sys_timer_delete +262 o32 clock_settime sys_clock_settime32 +263 o32 clock_gettime sys_clock_gettime32 +264 o32 clock_getres sys_clock_getres_time32 +265 o32 clock_nanosleep sys_clock_nanosleep_time32 +266 o32 tgkill sys_tgkill +267 o32 utimes sys_utimes_time32 +268 o32 mbind sys_mbind compat_sys_mbind +269 o32 get_mempolicy sys_get_mempolicy compat_sys_get_mempolicy +270 o32 set_mempolicy sys_set_mempolicy compat_sys_set_mempolicy +271 o32 mq_open sys_mq_open compat_sys_mq_open +272 o32 mq_unlink sys_mq_unlink +273 o32 mq_timedsend sys_mq_timedsend_time32 +274 o32 mq_timedreceive sys_mq_timedreceive_time32 +275 o32 mq_notify sys_mq_notify compat_sys_mq_notify +276 o32 mq_getsetattr sys_mq_getsetattr compat_sys_mq_getsetattr +277 o32 vserver sys_ni_syscall +278 o32 waitid sys_waitid compat_sys_waitid +# 279 was sys_setaltroot +280 o32 add_key sys_add_key +281 o32 request_key sys_request_key +282 o32 keyctl sys_keyctl compat_sys_keyctl +283 o32 set_thread_area sys_set_thread_area +284 o32 inotify_init sys_inotify_init +285 o32 inotify_add_watch sys_inotify_add_watch +286 o32 inotify_rm_watch sys_inotify_rm_watch +287 o32 migrate_pages sys_migrate_pages compat_sys_migrate_pages +288 o32 openat sys_openat compat_sys_openat +289 o32 mkdirat sys_mkdirat +290 o32 mknodat sys_mknodat +291 o32 fchownat sys_fchownat +292 o32 futimesat sys_futimesat_time32 +293 o32 fstatat64 sys_fstatat64 sys_newfstatat +294 o32 unlinkat sys_unlinkat +295 o32 renameat sys_renameat +296 o32 linkat sys_linkat +297 o32 symlinkat sys_symlinkat +298 o32 readlinkat sys_readlinkat +299 o32 fchmodat sys_fchmodat +300 o32 faccessat sys_faccessat +301 o32 pselect6 sys_pselect6_time32 compat_sys_pselect6_time32 +302 o32 ppoll sys_ppoll_time32 compat_sys_ppoll_time32 +303 o32 unshare sys_unshare +304 o32 splice sys_splice +305 o32 sync_file_range sys_sync_file_range sys32_sync_file_range +306 o32 tee sys_tee +307 o32 vmsplice sys_vmsplice +308 o32 move_pages sys_move_pages compat_sys_move_pages +309 o32 set_robust_list sys_set_robust_list compat_sys_set_robust_list +310 o32 get_robust_list sys_get_robust_list compat_sys_get_robust_list +311 o32 kexec_load sys_kexec_load compat_sys_kexec_load +312 o32 getcpu sys_getcpu +313 o32 epoll_pwait sys_epoll_pwait compat_sys_epoll_pwait +314 o32 ioprio_set sys_ioprio_set +315 o32 ioprio_get sys_ioprio_get +316 o32 utimensat sys_utimensat_time32 +317 o32 signalfd sys_signalfd compat_sys_signalfd +318 o32 timerfd sys_ni_syscall +319 o32 eventfd sys_eventfd +320 o32 fallocate sys_fallocate sys32_fallocate +321 o32 timerfd_create sys_timerfd_create +322 o32 timerfd_gettime sys_timerfd_gettime32 +323 o32 timerfd_settime sys_timerfd_settime32 +324 o32 signalfd4 sys_signalfd4 compat_sys_signalfd4 +325 o32 eventfd2 sys_eventfd2 +326 o32 epoll_create1 sys_epoll_create1 +327 o32 dup3 sys_dup3 +328 o32 pipe2 sys_pipe2 +329 o32 inotify_init1 sys_inotify_init1 +330 o32 preadv sys_preadv compat_sys_preadv +331 o32 pwritev sys_pwritev compat_sys_pwritev +332 o32 rt_tgsigqueueinfo sys_rt_tgsigqueueinfo compat_sys_rt_tgsigqueueinfo +333 o32 perf_event_open sys_perf_event_open +334 o32 accept4 sys_accept4 +335 o32 recvmmsg sys_recvmmsg_time32 compat_sys_recvmmsg_time32 +336 o32 fanotify_init sys_fanotify_init +337 o32 fanotify_mark sys_fanotify_mark compat_sys_fanotify_mark +338 o32 prlimit64 sys_prlimit64 +339 o32 name_to_handle_at sys_name_to_handle_at +340 o32 open_by_handle_at sys_open_by_handle_at compat_sys_open_by_handle_at +341 o32 clock_adjtime sys_clock_adjtime32 +342 o32 syncfs sys_syncfs +343 o32 sendmmsg sys_sendmmsg compat_sys_sendmmsg +344 o32 setns sys_setns +345 o32 process_vm_readv sys_process_vm_readv +346 o32 process_vm_writev sys_process_vm_writev +347 o32 kcmp sys_kcmp +348 o32 finit_module sys_finit_module +349 o32 sched_setattr sys_sched_setattr +350 o32 sched_getattr sys_sched_getattr +351 o32 renameat2 sys_renameat2 +352 o32 seccomp sys_seccomp +353 o32 getrandom sys_getrandom +354 o32 memfd_create sys_memfd_create +355 o32 bpf sys_bpf +356 o32 execveat sys_execveat compat_sys_execveat +357 o32 userfaultfd sys_userfaultfd +358 o32 membarrier sys_membarrier +359 o32 mlock2 sys_mlock2 +360 o32 copy_file_range sys_copy_file_range +361 o32 preadv2 sys_preadv2 compat_sys_preadv2 +362 o32 pwritev2 sys_pwritev2 compat_sys_pwritev2 +363 o32 pkey_mprotect sys_pkey_mprotect +364 o32 pkey_alloc sys_pkey_alloc +365 o32 pkey_free sys_pkey_free +366 o32 statx sys_statx +367 o32 rseq sys_rseq +368 o32 io_pgetevents sys_io_pgetevents_time32 compat_sys_io_pgetevents +# room for arch specific calls +393 o32 semget sys_semget +394 o32 semctl sys_semctl compat_sys_semctl +395 o32 shmget sys_shmget +396 o32 shmctl sys_shmctl compat_sys_shmctl +397 o32 shmat sys_shmat compat_sys_shmat +398 o32 shmdt sys_shmdt +399 o32 msgget sys_msgget +400 o32 msgsnd sys_msgsnd compat_sys_msgsnd +401 o32 msgrcv sys_msgrcv compat_sys_msgrcv +402 o32 msgctl sys_msgctl compat_sys_msgctl +403 o32 clock_gettime64 sys_clock_gettime sys_clock_gettime +404 o32 clock_settime64 sys_clock_settime sys_clock_settime +405 o32 clock_adjtime64 sys_clock_adjtime sys_clock_adjtime +406 o32 clock_getres_time64 sys_clock_getres sys_clock_getres +407 o32 clock_nanosleep_time64 sys_clock_nanosleep sys_clock_nanosleep +408 o32 timer_gettime64 sys_timer_gettime sys_timer_gettime +409 o32 timer_settime64 sys_timer_settime sys_timer_settime +410 o32 timerfd_gettime64 sys_timerfd_gettime sys_timerfd_gettime +411 o32 timerfd_settime64 sys_timerfd_settime sys_timerfd_settime +412 o32 utimensat_time64 sys_utimensat sys_utimensat +413 o32 pselect6_time64 sys_pselect6 compat_sys_pselect6_time64 +414 o32 ppoll_time64 sys_ppoll compat_sys_ppoll_time64 +416 o32 io_pgetevents_time64 sys_io_pgetevents sys_io_pgetevents +417 o32 recvmmsg_time64 sys_recvmmsg compat_sys_recvmmsg_time64 +418 o32 mq_timedsend_time64 sys_mq_timedsend sys_mq_timedsend +419 o32 mq_timedreceive_time64 sys_mq_timedreceive sys_mq_timedreceive +420 o32 semtimedop_time64 sys_semtimedop sys_semtimedop +421 o32 rt_sigtimedwait_time64 sys_rt_sigtimedwait compat_sys_rt_sigtimedwait_time64 +422 o32 futex_time64 sys_futex sys_futex +423 o32 sched_rr_get_interval_time64 sys_sched_rr_get_interval sys_sched_rr_get_interval +424 o32 pidfd_send_signal sys_pidfd_send_signal +425 o32 io_uring_setup sys_io_uring_setup +426 o32 io_uring_enter sys_io_uring_enter +427 o32 io_uring_register sys_io_uring_register +428 o32 open_tree sys_open_tree +429 o32 move_mount sys_move_mount +430 o32 fsopen sys_fsopen +431 o32 fsconfig sys_fsconfig +432 o32 fsmount sys_fsmount +433 o32 fspick sys_fspick +434 o32 pidfd_open sys_pidfd_open +435 o32 clone3 __sys_clone3 +436 o32 close_range sys_close_range +437 o32 openat2 sys_openat2 +438 o32 pidfd_getfd sys_pidfd_getfd +439 o32 faccessat2 sys_faccessat2 +440 o32 process_madvise sys_process_madvise diff --git a/arch/mips/kernel/syscalls/syscallhdr.sh b/arch/mips/kernel/syscalls/syscallhdr.sh new file mode 100644 index 000000000..2e241e713 --- /dev/null +++ b/arch/mips/kernel/syscalls/syscallhdr.sh @@ -0,0 +1,36 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +in="$1" +out="$2" +my_abis=`echo "($3)" | tr ',' '|'` +prefix="$4" +offset="$5" + +fileguard=_UAPI_ASM_MIPS_`basename "$out" | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ + -e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g'` +grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | ( + printf "#ifndef %s\n" "${fileguard}" + printf "#define %s\n" "${fileguard}" + printf "\n" + + nxt=0 + while read nr abi name entry compat ; do + if [ -z "$offset" ]; then + printf "#define __NR_%s%s\t%s\n" \ + "${prefix}" "${name}" "${nr}" + else + printf "#define __NR_%s%s\t(%s + %s)\n" \ + "${prefix}" "${name}" "${offset}" "${nr}" + fi + nxt=$((nr+1)) + done + + printf "\n" + printf "#ifdef __KERNEL__\n" + printf "#define __NR_syscalls\t%s\n" "${nxt}" + printf "#endif\n" + printf "\n" + printf "#endif /* %s */\n" "${fileguard}" +) > "$out" diff --git a/arch/mips/kernel/syscalls/syscallnr.sh b/arch/mips/kernel/syscalls/syscallnr.sh new file mode 100644 index 000000000..60bbdb3fe --- /dev/null +++ b/arch/mips/kernel/syscalls/syscallnr.sh @@ -0,0 +1,28 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +in="$1" +out="$2" +my_abis=`echo "($3)" | tr ',' '|'` +prefix="$4" +offset="$5" + +fileguard=_UAPI_ASM_MIPS_`basename "$out" | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \ + -e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g'` +grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | ( + printf "#ifndef %s\n" "${fileguard}" + printf "#define %s\n" "${fileguard}" + printf "\n" + + nxt=0 + while read nr abi name entry compat ; do + nxt=$((nr+1)) + done + + printf "#define __NR_%s_Linux\t%s\n" "${prefix}" "${offset}" + printf "#define __NR_%s_Linux_syscalls\t%s\n" "${prefix}" "${nxt}" + printf "\n" + printf "#endif /* %s */" "${fileguard}" + printf "\n" +) > "$out" diff --git a/arch/mips/kernel/syscalls/syscalltbl.sh b/arch/mips/kernel/syscalls/syscalltbl.sh new file mode 100644 index 000000000..1e2570740 --- /dev/null +++ b/arch/mips/kernel/syscalls/syscalltbl.sh @@ -0,0 +1,36 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +in="$1" +out="$2" +my_abis=`echo "($3)" | tr ',' '|'` +my_abi="$4" +offset="$5" + +emit() { + t_nxt="$1" + t_nr="$2" + t_entry="$3" + + while [ $t_nxt -lt $t_nr ]; do + printf "__SYSCALL(%s,sys_ni_syscall)\n" "${t_nxt}" + t_nxt=$((t_nxt+1)) + done + printf "__SYSCALL(%s,%s)\n" "${t_nxt}" "${t_entry}" +} + +grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | ( + nxt=0 + if [ -z "$offset" ]; then + offset=0 + fi + + while read nr abi name entry compat ; do + if [ "$my_abi" = "64_o32" ] && [ ! -z "$compat" ]; then + emit $((nxt+offset)) $((nr+offset)) $compat + else + emit $((nxt+offset)) $((nr+offset)) $entry + fi + nxt=$((nr+1)) + done +) > "$out" diff --git a/arch/mips/kernel/sysrq.c b/arch/mips/kernel/sysrq.c new file mode 100644 index 000000000..9c1a20191 --- /dev/null +++ b/arch/mips/kernel/sysrq.c @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MIPS specific sysrq operations. + * + * Copyright (C) 2015 Imagination Technologies Ltd. + */ +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/sysrq.h> +#include <linux/workqueue.h> + +#include <asm/cpu-features.h> +#include <asm/mipsregs.h> +#include <asm/tlbdebug.h> + +/* + * Dump TLB entries on all CPUs. + */ + +static DEFINE_SPINLOCK(show_lock); + +static void sysrq_tlbdump_single(void *dummy) +{ + unsigned long flags; + + spin_lock_irqsave(&show_lock, flags); + + pr_info("CPU%d:\n", smp_processor_id()); + dump_tlb_regs(); + pr_info("\n"); + dump_tlb_all(); + pr_info("\n"); + + spin_unlock_irqrestore(&show_lock, flags); +} + +#ifdef CONFIG_SMP +static void sysrq_tlbdump_othercpus(struct work_struct *dummy) +{ + smp_call_function(sysrq_tlbdump_single, NULL, 0); +} + +static DECLARE_WORK(sysrq_tlbdump, sysrq_tlbdump_othercpus); +#endif + +static void sysrq_handle_tlbdump(int key) +{ + sysrq_tlbdump_single(NULL); +#ifdef CONFIG_SMP + schedule_work(&sysrq_tlbdump); +#endif +} + +static const struct sysrq_key_op sysrq_tlbdump_op = { + .handler = sysrq_handle_tlbdump, + .help_msg = "show-tlbs(x)", + .action_msg = "Show TLB entries", + .enable_mask = SYSRQ_ENABLE_DUMP, +}; + +static int __init mips_sysrq_init(void) +{ + return register_sysrq_key('x', &sysrq_tlbdump_op); +} +arch_initcall(mips_sysrq_init); diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c new file mode 100644 index 000000000..ed339d797 --- /dev/null +++ b/arch/mips/kernel/time.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (c) 2003, 2004 Maciej W. Rozycki + * + * Common time service routines for MIPS machines. + */ +#include <linux/bug.h> +#include <linux/clockchips.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/param.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/export.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> + +#include <asm/cpu-features.h> +#include <asm/cpu-type.h> +#include <asm/div64.h> +#include <asm/time.h> + +#ifdef CONFIG_CPU_FREQ + +static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref); +static DEFINE_PER_CPU(unsigned long, pcp_lpj_ref_freq); +static unsigned long glb_lpj_ref; +static unsigned long glb_lpj_ref_freq; + +static int cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + struct cpumask *cpus = freq->policy->cpus; + unsigned long lpj; + int cpu; + + /* + * Skip lpj numbers adjustment if the CPU-freq transition is safe for + * the loops delay. (Is this possible?) + */ + if (freq->flags & CPUFREQ_CONST_LOOPS) + return NOTIFY_OK; + + /* Save the initial values of the lpjes for future scaling. */ + if (!glb_lpj_ref) { + glb_lpj_ref = boot_cpu_data.udelay_val; + glb_lpj_ref_freq = freq->old; + + for_each_online_cpu(cpu) { + per_cpu(pcp_lpj_ref, cpu) = + cpu_data[cpu].udelay_val; + per_cpu(pcp_lpj_ref_freq, cpu) = freq->old; + } + } + + /* + * Adjust global lpj variable and per-CPU udelay_val number in + * accordance with the new CPU frequency. + */ + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new)) { + loops_per_jiffy = cpufreq_scale(glb_lpj_ref, + glb_lpj_ref_freq, + freq->new); + + for_each_cpu(cpu, cpus) { + lpj = cpufreq_scale(per_cpu(pcp_lpj_ref, cpu), + per_cpu(pcp_lpj_ref_freq, cpu), + freq->new); + cpu_data[cpu].udelay_val = (unsigned int)lpj; + } + } + + return NOTIFY_OK; +} + +static struct notifier_block cpufreq_notifier = { + .notifier_call = cpufreq_callback, +}; + +static int __init register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); +} +core_initcall(register_cpufreq_notifier); + +#endif /* CONFIG_CPU_FREQ */ + +/* + * forward reference + */ +DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); + +static int null_perf_irq(void) +{ + return 0; +} + +int (*perf_irq)(void) = null_perf_irq; + +EXPORT_SYMBOL(perf_irq); + +/* + * time_init() - it does the following things. + * + * 1) plat_time_init() - + * a) (optional) set up RTC routines, + * b) (optional) calibrate and set the mips_hpt_frequency + * (only needed if you intended to use cpu counter as timer interrupt + * source) + * 2) calculate a couple of cached variables for later usage + */ + +unsigned int mips_hpt_frequency; +EXPORT_SYMBOL_GPL(mips_hpt_frequency); + +static __init int cpu_has_mfc0_count_bug(void) +{ + switch (current_cpu_type()) { + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: + /* + * V3.0 is documented as suffering from the mfc0 from count bug. + * Afaik this is the last version of the R4000. Later versions + * were marketed as R4400. + */ + return 1; + + case CPU_R4400PC: + case CPU_R4400SC: + case CPU_R4400MC: + /* + * The published errata for the R4400 up to 3.0 say the CPU + * has the mfc0 from count bug. This seems the last version + * produced. + */ + return 1; + } + + return 0; +} + +void __init time_init(void) +{ + plat_time_init(); + + /* + * The use of the R4k timer as a clock event takes precedence; + * if reading the Count register might interfere with the timer + * interrupt, then we don't use the timer as a clock source. + * We may still use the timer as a clock source though if the + * timer interrupt isn't reliable; the interference doesn't + * matter then, because we don't use the interrupt. + */ + if (mips_clockevent_init() != 0 || !cpu_has_mfc0_count_bug()) + init_mips_clocksource(); +} diff --git a/arch/mips/kernel/topology.c b/arch/mips/kernel/topology.c new file mode 100644 index 000000000..08ad6371f --- /dev/null +++ b/arch/mips/kernel/topology.c @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/percpu.h> + +static DEFINE_PER_CPU(struct cpu, cpu_devices); + +static int __init topology_init(void) +{ + int i, ret; + +#ifdef CONFIG_NUMA + for_each_online_node(i) + register_one_node(i); +#endif /* CONFIG_NUMA */ + + for_each_present_cpu(i) { + struct cpu *c = &per_cpu(cpu_devices, i); + + c->hotpluggable = !!i; + ret = register_cpu(c, i); + if (ret) + printk(KERN_WARNING "topology_init: register_cpu %d " + "failed (%d)\n", i, ret); + } + + return 0; +} + +subsys_initcall(topology_init); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c new file mode 100644 index 000000000..ebd0101f0 --- /dev/null +++ b/arch/mips/kernel/traps.c @@ -0,0 +1,2571 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 01, 06 Ralf Baechle + * Copyright (C) 1995, 1996 Paul M. Antoine + * Copyright (C) 1998 Ulf Carlsson + * Copyright (C) 1999 Silicon Graphics, Inc. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2002, 2003, 2004, 2005, 2007 Maciej W. Rozycki + * Copyright (C) 2000, 2001, 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2014, Imagination Technologies Ltd. + */ +#include <linux/bitops.h> +#include <linux/bug.h> +#include <linux/compiler.h> +#include <linux/context_tracking.h> +#include <linux/cpu_pm.h> +#include <linux/kexec.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/extable.h> +#include <linux/mm.h> +#include <linux/sched/mm.h> +#include <linux/sched/debug.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/kallsyms.h> +#include <linux/memblock.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/kgdb.h> +#include <linux/kdebug.h> +#include <linux/kprobes.h> +#include <linux/notifier.h> +#include <linux/kdb.h> +#include <linux/irq.h> +#include <linux/perf_event.h> + +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <asm/branch.h> +#include <asm/break.h> +#include <asm/cop2.h> +#include <asm/cpu.h> +#include <asm/cpu-type.h> +#include <asm/dsp.h> +#include <asm/fpu.h> +#include <asm/fpu_emulator.h> +#include <asm/idle.h> +#include <asm/isa-rev.h> +#include <asm/mips-cps.h> +#include <asm/mips-r2-to-r6-emul.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/module.h> +#include <asm/msa.h> +#include <asm/ptrace.h> +#include <asm/sections.h> +#include <asm/siginfo.h> +#include <asm/tlbdebug.h> +#include <asm/traps.h> +#include <linux/uaccess.h> +#include <asm/watch.h> +#include <asm/mmu_context.h> +#include <asm/types.h> +#include <asm/stacktrace.h> +#include <asm/tlbex.h> +#include <asm/uasm.h> + +#include <asm/mach-loongson64/cpucfg-emul.h> + +extern void check_wait(void); +extern asmlinkage void rollback_handle_int(void); +extern asmlinkage void handle_int(void); +extern asmlinkage void handle_adel(void); +extern asmlinkage void handle_ades(void); +extern asmlinkage void handle_ibe(void); +extern asmlinkage void handle_dbe(void); +extern asmlinkage void handle_sys(void); +extern asmlinkage void handle_bp(void); +extern asmlinkage void handle_ri(void); +extern asmlinkage void handle_ri_rdhwr_tlbp(void); +extern asmlinkage void handle_ri_rdhwr(void); +extern asmlinkage void handle_cpu(void); +extern asmlinkage void handle_ov(void); +extern asmlinkage void handle_tr(void); +extern asmlinkage void handle_msa_fpe(void); +extern asmlinkage void handle_fpe(void); +extern asmlinkage void handle_ftlb(void); +extern asmlinkage void handle_gsexc(void); +extern asmlinkage void handle_msa(void); +extern asmlinkage void handle_mdmx(void); +extern asmlinkage void handle_watch(void); +extern asmlinkage void handle_mt(void); +extern asmlinkage void handle_dsp(void); +extern asmlinkage void handle_mcheck(void); +extern asmlinkage void handle_reserved(void); +extern void tlb_do_page_fault_0(void); + +void (*board_be_init)(void); +int (*board_be_handler)(struct pt_regs *regs, int is_fixup); +void (*board_nmi_handler_setup)(void); +void (*board_ejtag_handler_setup)(void); +void (*board_bind_eic_interrupt)(int irq, int regset); +void (*board_ebase_setup)(void); +void(*board_cache_error_setup)(void); + +static void show_raw_backtrace(unsigned long reg29, const char *loglvl) +{ + unsigned long *sp = (unsigned long *)(reg29 & ~3); + unsigned long addr; + + printk("%sCall Trace:", loglvl); +#ifdef CONFIG_KALLSYMS + printk("%s\n", loglvl); +#endif + while (!kstack_end(sp)) { + unsigned long __user *p = + (unsigned long __user *)(unsigned long)sp++; + if (__get_user(addr, p)) { + printk("%s (Bad stack address)", loglvl); + break; + } + if (__kernel_text_address(addr)) + print_ip_sym(loglvl, addr); + } + printk("%s\n", loglvl); +} + +#ifdef CONFIG_KALLSYMS +int raw_show_trace; +static int __init set_raw_show_trace(char *str) +{ + raw_show_trace = 1; + return 1; +} +__setup("raw_show_trace", set_raw_show_trace); +#endif + +static void show_backtrace(struct task_struct *task, const struct pt_regs *regs, + const char *loglvl) +{ + unsigned long sp = regs->regs[29]; + unsigned long ra = regs->regs[31]; + unsigned long pc = regs->cp0_epc; + + if (!task) + task = current; + + if (raw_show_trace || user_mode(regs) || !__kernel_text_address(pc)) { + show_raw_backtrace(sp, loglvl); + return; + } + printk("%sCall Trace:\n", loglvl); + do { + print_ip_sym(loglvl, pc); + pc = unwind_stack(task, &sp, pc, &ra); + } while (pc); + pr_cont("\n"); +} + +/* + * This routine abuses get_user()/put_user() to reference pointers + * with at least a bit of error checking ... + */ +static void show_stacktrace(struct task_struct *task, + const struct pt_regs *regs, const char *loglvl) +{ + const int field = 2 * sizeof(unsigned long); + long stackdata; + int i; + unsigned long __user *sp = (unsigned long __user *)regs->regs[29]; + + printk("%sStack :", loglvl); + i = 0; + while ((unsigned long) sp & (PAGE_SIZE - 1)) { + if (i && ((i % (64 / field)) == 0)) { + pr_cont("\n"); + printk("%s ", loglvl); + } + if (i > 39) { + pr_cont(" ..."); + break; + } + + if (__get_user(stackdata, sp++)) { + pr_cont(" (Bad stack address)"); + break; + } + + pr_cont(" %0*lx", field, stackdata); + i++; + } + pr_cont("\n"); + show_backtrace(task, regs, loglvl); +} + +void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl) +{ + struct pt_regs regs; + mm_segment_t old_fs = get_fs(); + + regs.cp0_status = KSU_KERNEL; + if (sp) { + regs.regs[29] = (unsigned long)sp; + regs.regs[31] = 0; + regs.cp0_epc = 0; + } else { + if (task && task != current) { + regs.regs[29] = task->thread.reg29; + regs.regs[31] = 0; + regs.cp0_epc = task->thread.reg31; + } else { + prepare_frametrace(®s); + } + } + /* + * show_stack() deals exclusively with kernel mode, so be sure to access + * the stack in the kernel (not user) address space. + */ + set_fs(KERNEL_DS); + show_stacktrace(task, ®s, loglvl); + set_fs(old_fs); +} + +static void show_code(unsigned int __user *pc) +{ + long i; + unsigned short __user *pc16 = NULL; + + printk("Code:"); + + if ((unsigned long)pc & 1) + pc16 = (unsigned short __user *)((unsigned long)pc & ~1); + for(i = -3 ; i < 6 ; i++) { + unsigned int insn; + if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) { + pr_cont(" (Bad address in epc)\n"); + break; + } + pr_cont("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>')); + } + pr_cont("\n"); +} + +static void __show_regs(const struct pt_regs *regs) +{ + const int field = 2 * sizeof(unsigned long); + unsigned int cause = regs->cp0_cause; + unsigned int exccode; + int i; + + show_regs_print_info(KERN_DEFAULT); + + /* + * Saved main processor registers + */ + for (i = 0; i < 32; ) { + if ((i % 4) == 0) + printk("$%2d :", i); + if (i == 0) + pr_cont(" %0*lx", field, 0UL); + else if (i == 26 || i == 27) + pr_cont(" %*s", field, ""); + else + pr_cont(" %0*lx", field, regs->regs[i]); + + i++; + if ((i % 4) == 0) + pr_cont("\n"); + } + +#ifdef CONFIG_CPU_HAS_SMARTMIPS + printk("Acx : %0*lx\n", field, regs->acx); +#endif + if (MIPS_ISA_REV < 6) { + printk("Hi : %0*lx\n", field, regs->hi); + printk("Lo : %0*lx\n", field, regs->lo); + } + + /* + * Saved cp0 registers + */ + printk("epc : %0*lx %pS\n", field, regs->cp0_epc, + (void *) regs->cp0_epc); + printk("ra : %0*lx %pS\n", field, regs->regs[31], + (void *) regs->regs[31]); + + printk("Status: %08x ", (uint32_t) regs->cp0_status); + + if (cpu_has_3kex) { + if (regs->cp0_status & ST0_KUO) + pr_cont("KUo "); + if (regs->cp0_status & ST0_IEO) + pr_cont("IEo "); + if (regs->cp0_status & ST0_KUP) + pr_cont("KUp "); + if (regs->cp0_status & ST0_IEP) + pr_cont("IEp "); + if (regs->cp0_status & ST0_KUC) + pr_cont("KUc "); + if (regs->cp0_status & ST0_IEC) + pr_cont("IEc "); + } else if (cpu_has_4kex) { + if (regs->cp0_status & ST0_KX) + pr_cont("KX "); + if (regs->cp0_status & ST0_SX) + pr_cont("SX "); + if (regs->cp0_status & ST0_UX) + pr_cont("UX "); + switch (regs->cp0_status & ST0_KSU) { + case KSU_USER: + pr_cont("USER "); + break; + case KSU_SUPERVISOR: + pr_cont("SUPERVISOR "); + break; + case KSU_KERNEL: + pr_cont("KERNEL "); + break; + default: + pr_cont("BAD_MODE "); + break; + } + if (regs->cp0_status & ST0_ERL) + pr_cont("ERL "); + if (regs->cp0_status & ST0_EXL) + pr_cont("EXL "); + if (regs->cp0_status & ST0_IE) + pr_cont("IE "); + } + pr_cont("\n"); + + exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE; + printk("Cause : %08x (ExcCode %02x)\n", cause, exccode); + + if (1 <= exccode && exccode <= 5) + printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr); + + printk("PrId : %08x (%s)\n", read_c0_prid(), + cpu_name_string()); +} + +/* + * FIXME: really the generic show_regs should take a const pointer argument. + */ +void show_regs(struct pt_regs *regs) +{ + __show_regs(regs); + dump_stack(); +} + +void show_registers(struct pt_regs *regs) +{ + const int field = 2 * sizeof(unsigned long); + mm_segment_t old_fs = get_fs(); + + __show_regs(regs); + print_modules(); + printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n", + current->comm, current->pid, current_thread_info(), current, + field, current_thread_info()->tp_value); + if (cpu_has_userlocal) { + unsigned long tls; + + tls = read_c0_userlocal(); + if (tls != current_thread_info()->tp_value) + printk("*HwTLS: %0*lx\n", field, tls); + } + + if (!user_mode(regs)) + /* Necessary for getting the correct stack content */ + set_fs(KERNEL_DS); + show_stacktrace(current, regs, KERN_DEFAULT); + show_code((unsigned int __user *) regs->cp0_epc); + printk("\n"); + set_fs(old_fs); +} + +static DEFINE_RAW_SPINLOCK(die_lock); + +void __noreturn die(const char *str, struct pt_regs *regs) +{ + static int die_counter; + int sig = SIGSEGV; + + oops_enter(); + + if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_nr, + SIGSEGV) == NOTIFY_STOP) + sig = 0; + + console_verbose(); + raw_spin_lock_irq(&die_lock); + bust_spinlocks(1); + + printk("%s[#%d]:\n", str, ++die_counter); + show_registers(regs); + add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE); + raw_spin_unlock_irq(&die_lock); + + oops_exit(); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) + panic("Fatal exception"); + + if (regs && kexec_should_crash(current)) + crash_kexec(regs); + + make_task_dead(sig); +} + +extern struct exception_table_entry __start___dbe_table[]; +extern struct exception_table_entry __stop___dbe_table[]; + +__asm__( +" .section __dbe_table, \"a\"\n" +" .previous \n"); + +/* Given an address, look for it in the exception tables. */ +static const struct exception_table_entry *search_dbe_tables(unsigned long addr) +{ + const struct exception_table_entry *e; + + e = search_extable(__start___dbe_table, + __stop___dbe_table - __start___dbe_table, addr); + if (!e) + e = search_module_dbetables(addr); + return e; +} + +asmlinkage void do_be(struct pt_regs *regs) +{ + const int field = 2 * sizeof(unsigned long); + const struct exception_table_entry *fixup = NULL; + int data = regs->cp0_cause & 4; + int action = MIPS_BE_FATAL; + enum ctx_state prev_state; + + prev_state = exception_enter(); + /* XXX For now. Fixme, this searches the wrong table ... */ + if (data && !user_mode(regs)) + fixup = search_dbe_tables(exception_epc(regs)); + + if (fixup) + action = MIPS_BE_FIXUP; + + if (board_be_handler) + action = board_be_handler(regs, fixup != NULL); + else + mips_cm_error_report(); + + switch (action) { + case MIPS_BE_DISCARD: + goto out; + case MIPS_BE_FIXUP: + if (fixup) { + regs->cp0_epc = fixup->nextinsn; + goto out; + } + break; + default: + break; + } + + /* + * Assume it would be too dangerous to continue ... + */ + printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", + data ? "Data" : "Instruction", + field, regs->cp0_epc, field, regs->regs[31]); + if (notify_die(DIE_OOPS, "bus error", regs, 0, current->thread.trap_nr, + SIGBUS) == NOTIFY_STOP) + goto out; + + die_if_kernel("Oops", regs); + force_sig(SIGBUS); + +out: + exception_exit(prev_state); +} + +/* + * ll/sc, rdhwr, sync emulation + */ + +#define OPCODE 0xfc000000 +#define BASE 0x03e00000 +#define RT 0x001f0000 +#define OFFSET 0x0000ffff +#define LL 0xc0000000 +#define SC 0xe0000000 +#define SPEC0 0x00000000 +#define SPEC3 0x7c000000 +#define RD 0x0000f800 +#define FUNC 0x0000003f +#define SYNC 0x0000000f +#define RDHWR 0x0000003b + +/* microMIPS definitions */ +#define MM_POOL32A_FUNC 0xfc00ffff +#define MM_RDHWR 0x00006b3c +#define MM_RS 0x001f0000 +#define MM_RT 0x03e00000 + +/* + * The ll_bit is cleared by r*_switch.S + */ + +unsigned int ll_bit; +struct task_struct *ll_task; + +static inline int simulate_ll(struct pt_regs *regs, unsigned int opcode) +{ + unsigned long value, __user *vaddr; + long offset; + + /* + * analyse the ll instruction that just caused a ri exception + * and put the referenced address to addr. + */ + + /* sign extend offset */ + offset = opcode & OFFSET; + offset <<= 16; + offset >>= 16; + + vaddr = (unsigned long __user *) + ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); + + if ((unsigned long)vaddr & 3) + return SIGBUS; + if (get_user(value, vaddr)) + return SIGSEGV; + + preempt_disable(); + + if (ll_task == NULL || ll_task == current) { + ll_bit = 1; + } else { + ll_bit = 0; + } + ll_task = current; + + preempt_enable(); + + regs->regs[(opcode & RT) >> 16] = value; + + return 0; +} + +static inline int simulate_sc(struct pt_regs *regs, unsigned int opcode) +{ + unsigned long __user *vaddr; + unsigned long reg; + long offset; + + /* + * analyse the sc instruction that just caused a ri exception + * and put the referenced address to addr. + */ + + /* sign extend offset */ + offset = opcode & OFFSET; + offset <<= 16; + offset >>= 16; + + vaddr = (unsigned long __user *) + ((unsigned long)(regs->regs[(opcode & BASE) >> 21]) + offset); + reg = (opcode & RT) >> 16; + + if ((unsigned long)vaddr & 3) + return SIGBUS; + + preempt_disable(); + + if (ll_bit == 0 || ll_task != current) { + regs->regs[reg] = 0; + preempt_enable(); + return 0; + } + + preempt_enable(); + + if (put_user(regs->regs[reg], vaddr)) + return SIGSEGV; + + regs->regs[reg] = 1; + + return 0; +} + +/* + * ll uses the opcode of lwc0 and sc uses the opcode of swc0. That is both + * opcodes are supposed to result in coprocessor unusable exceptions if + * executed on ll/sc-less processors. That's the theory. In practice a + * few processors such as NEC's VR4100 throw reserved instruction exceptions + * instead, so we're doing the emulation thing in both exception handlers. + */ +static int simulate_llsc(struct pt_regs *regs, unsigned int opcode) +{ + if ((opcode & OPCODE) == LL) { + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, + 1, regs, 0); + return simulate_ll(regs, opcode); + } + if ((opcode & OPCODE) == SC) { + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, + 1, regs, 0); + return simulate_sc(regs, opcode); + } + + return -1; /* Must be something else ... */ +} + +/* + * Simulate trapping 'rdhwr' instructions to provide user accessible + * registers not implemented in hardware. + */ +static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt) +{ + struct thread_info *ti = task_thread_info(current); + + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, + 1, regs, 0); + switch (rd) { + case MIPS_HWR_CPUNUM: /* CPU number */ + regs->regs[rt] = smp_processor_id(); + return 0; + case MIPS_HWR_SYNCISTEP: /* SYNCI length */ + regs->regs[rt] = min(current_cpu_data.dcache.linesz, + current_cpu_data.icache.linesz); + return 0; + case MIPS_HWR_CC: /* Read count register */ + regs->regs[rt] = read_c0_count(); + return 0; + case MIPS_HWR_CCRES: /* Count register resolution */ + switch (current_cpu_type()) { + case CPU_20KC: + case CPU_25KF: + regs->regs[rt] = 1; + break; + default: + regs->regs[rt] = 2; + } + return 0; + case MIPS_HWR_ULR: /* Read UserLocal register */ + regs->regs[rt] = ti->tp_value; + return 0; + default: + return -1; + } +} + +static int simulate_rdhwr_normal(struct pt_regs *regs, unsigned int opcode) +{ + if ((opcode & OPCODE) == SPEC3 && (opcode & FUNC) == RDHWR) { + int rd = (opcode & RD) >> 11; + int rt = (opcode & RT) >> 16; + + simulate_rdhwr(regs, rd, rt); + return 0; + } + + /* Not ours. */ + return -1; +} + +static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned int opcode) +{ + if ((opcode & MM_POOL32A_FUNC) == MM_RDHWR) { + int rd = (opcode & MM_RS) >> 16; + int rt = (opcode & MM_RT) >> 21; + simulate_rdhwr(regs, rd, rt); + return 0; + } + + /* Not ours. */ + return -1; +} + +static int simulate_sync(struct pt_regs *regs, unsigned int opcode) +{ + if ((opcode & OPCODE) == SPEC0 && (opcode & FUNC) == SYNC) { + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, + 1, regs, 0); + return 0; + } + + return -1; /* Must be something else ... */ +} + +/* + * Loongson-3 CSR instructions emulation + */ + +#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION + +#define LWC2 0xc8000000 +#define RS BASE +#define CSR_OPCODE2 0x00000118 +#define CSR_OPCODE2_MASK 0x000007ff +#define CSR_FUNC_MASK RT +#define CSR_FUNC_CPUCFG 0x8 + +static int simulate_loongson3_cpucfg(struct pt_regs *regs, + unsigned int opcode) +{ + int op = opcode & OPCODE; + int op2 = opcode & CSR_OPCODE2_MASK; + int csr_func = (opcode & CSR_FUNC_MASK) >> 16; + + if (op == LWC2 && op2 == CSR_OPCODE2 && csr_func == CSR_FUNC_CPUCFG) { + int rd = (opcode & RD) >> 11; + int rs = (opcode & RS) >> 21; + __u64 sel = regs->regs[rs]; + + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0); + + /* Do not emulate on unsupported core models. */ + preempt_disable(); + if (!loongson3_cpucfg_emulation_enabled(¤t_cpu_data)) { + preempt_enable(); + return -1; + } + regs->regs[rd] = loongson3_cpucfg_read_synthesized( + ¤t_cpu_data, sel); + preempt_enable(); + return 0; + } + + /* Not ours. */ + return -1; +} +#endif /* CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION */ + +asmlinkage void do_ov(struct pt_regs *regs) +{ + enum ctx_state prev_state; + + prev_state = exception_enter(); + die_if_kernel("Integer overflow", regs); + + force_sig_fault(SIGFPE, FPE_INTOVF, (void __user *)regs->cp0_epc); + exception_exit(prev_state); +} + +#ifdef CONFIG_MIPS_FP_SUPPORT + +/* + * Send SIGFPE according to FCSR Cause bits, which must have already + * been masked against Enable bits. This is impotant as Inexact can + * happen together with Overflow or Underflow, and `ptrace' can set + * any bits. + */ +void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr, + struct task_struct *tsk) +{ + int si_code = FPE_FLTUNK; + + if (fcr31 & FPU_CSR_INV_X) + si_code = FPE_FLTINV; + else if (fcr31 & FPU_CSR_DIV_X) + si_code = FPE_FLTDIV; + else if (fcr31 & FPU_CSR_OVF_X) + si_code = FPE_FLTOVF; + else if (fcr31 & FPU_CSR_UDF_X) + si_code = FPE_FLTUND; + else if (fcr31 & FPU_CSR_INE_X) + si_code = FPE_FLTRES; + + force_sig_fault_to_task(SIGFPE, si_code, fault_addr, tsk); +} + +int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31) +{ + int si_code; + struct vm_area_struct *vma; + + switch (sig) { + case 0: + return 0; + + case SIGFPE: + force_fcr31_sig(fcr31, fault_addr, current); + return 1; + + case SIGBUS: + force_sig_fault(SIGBUS, BUS_ADRERR, fault_addr); + return 1; + + case SIGSEGV: + mmap_read_lock(current->mm); + vma = find_vma(current->mm, (unsigned long)fault_addr); + if (vma && (vma->vm_start <= (unsigned long)fault_addr)) + si_code = SEGV_ACCERR; + else + si_code = SEGV_MAPERR; + mmap_read_unlock(current->mm); + force_sig_fault(SIGSEGV, si_code, fault_addr); + return 1; + + default: + force_sig(sig); + return 1; + } +} + +static int simulate_fp(struct pt_regs *regs, unsigned int opcode, + unsigned long old_epc, unsigned long old_ra) +{ + union mips_instruction inst = { .word = opcode }; + void __user *fault_addr; + unsigned long fcr31; + int sig; + + /* If it's obviously not an FP instruction, skip it */ + switch (inst.i_format.opcode) { + case cop1_op: + case cop1x_op: + case lwc1_op: + case ldc1_op: + case swc1_op: + case sdc1_op: + break; + + default: + return -1; + } + + /* + * do_ri skipped over the instruction via compute_return_epc, undo + * that for the FPU emulator. + */ + regs->cp0_epc = old_epc; + regs->regs[31] = old_ra; + + /* Run the emulator */ + sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, + &fault_addr); + + /* + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. + */ + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; + + /* Restore the hardware register state */ + own_fpu(1); + + /* Send a signal if required. */ + process_fpemu_return(sig, fault_addr, fcr31); + + return 0; +} + +/* + * XXX Delayed fp exceptions when doing a lazy ctx switch XXX + */ +asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) +{ + enum ctx_state prev_state; + void __user *fault_addr; + int sig; + + prev_state = exception_enter(); + if (notify_die(DIE_FP, "FP exception", regs, 0, current->thread.trap_nr, + SIGFPE) == NOTIFY_STOP) + goto out; + + /* Clear FCSR.Cause before enabling interrupts */ + write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31)); + local_irq_enable(); + + die_if_kernel("FP exception in kernel code", regs); + + if (fcr31 & FPU_CSR_UNI_X) { + /* + * Unimplemented operation exception. If we've got the full + * software emulator on-board, let's use it... + * + * Force FPU to dump state into task/thread context. We're + * moving a lot of data here for what is probably a single + * instruction, but the alternative is to pre-decode the FP + * register operands before invoking the emulator, which seems + * a bit extreme for what should be an infrequent event. + */ + + /* Run the emulator */ + sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, + &fault_addr); + + /* + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. + */ + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; + + /* Restore the hardware register state */ + own_fpu(1); /* Using the FPU again. */ + } else { + sig = SIGFPE; + fault_addr = (void __user *) regs->cp0_epc; + } + + /* Send a signal if required. */ + process_fpemu_return(sig, fault_addr, fcr31); + +out: + exception_exit(prev_state); +} + +/* + * MIPS MT processors may have fewer FPU contexts than CPU threads. If we've + * emulated more than some threshold number of instructions, force migration to + * a "CPU" that has FP support. + */ +static void mt_ase_fp_affinity(void) +{ +#ifdef CONFIG_MIPS_MT_FPAFF + if (mt_fpemul_threshold > 0 && + ((current->thread.emulated_fp++ > mt_fpemul_threshold))) { + /* + * If there's no FPU present, or if the application has already + * restricted the allowed set to exclude any CPUs with FPUs, + * we'll skip the procedure. + */ + if (cpumask_intersects(¤t->cpus_mask, &mt_fpu_cpumask)) { + cpumask_t tmask; + + current->thread.user_cpus_allowed + = current->cpus_mask; + cpumask_and(&tmask, ¤t->cpus_mask, + &mt_fpu_cpumask); + set_cpus_allowed_ptr(current, &tmask); + set_thread_flag(TIF_FPUBOUND); + } + } +#endif /* CONFIG_MIPS_MT_FPAFF */ +} + +#else /* !CONFIG_MIPS_FP_SUPPORT */ + +static int simulate_fp(struct pt_regs *regs, unsigned int opcode, + unsigned long old_epc, unsigned long old_ra) +{ + return -1; +} + +#endif /* !CONFIG_MIPS_FP_SUPPORT */ + +void do_trap_or_bp(struct pt_regs *regs, unsigned int code, int si_code, + const char *str) +{ + char b[40]; + +#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP + if (kgdb_ll_trap(DIE_TRAP, str, regs, code, current->thread.trap_nr, + SIGTRAP) == NOTIFY_STOP) + return; +#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */ + + if (notify_die(DIE_TRAP, str, regs, code, current->thread.trap_nr, + SIGTRAP) == NOTIFY_STOP) + return; + + /* + * A short test says that IRIX 5.3 sends SIGTRAP for all trap + * insns, even for trap and break codes that indicate arithmetic + * failures. Weird ... + * But should we continue the brokenness??? --macro + */ + switch (code) { + case BRK_OVERFLOW: + case BRK_DIVZERO: + scnprintf(b, sizeof(b), "%s instruction in kernel code", str); + die_if_kernel(b, regs); + force_sig_fault(SIGFPE, + code == BRK_DIVZERO ? FPE_INTDIV : FPE_INTOVF, + (void __user *) regs->cp0_epc); + break; + case BRK_BUG: + die_if_kernel("Kernel bug detected", regs); + force_sig(SIGTRAP); + break; + case BRK_MEMU: + /* + * This breakpoint code is used by the FPU emulator to retake + * control of the CPU after executing the instruction from the + * delay slot of an emulated branch. + * + * Terminate if exception was recognized as a delay slot return + * otherwise handle as normal. + */ + if (do_dsemulret(regs)) + return; + + die_if_kernel("Math emu break/trap", regs); + force_sig(SIGTRAP); + break; + default: + scnprintf(b, sizeof(b), "%s instruction in kernel code", str); + die_if_kernel(b, regs); + if (si_code) { + force_sig_fault(SIGTRAP, si_code, NULL); + } else { + force_sig(SIGTRAP); + } + } +} + +asmlinkage void do_bp(struct pt_regs *regs) +{ + unsigned long epc = msk_isa16_mode(exception_epc(regs)); + unsigned int opcode, bcode; + enum ctx_state prev_state; + mm_segment_t seg; + + seg = get_fs(); + if (!user_mode(regs)) + set_fs(KERNEL_DS); + + prev_state = exception_enter(); + current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f; + if (get_isa16_mode(regs->cp0_epc)) { + u16 instr[2]; + + if (__get_user(instr[0], (u16 __user *)epc)) + goto out_sigsegv; + + if (!cpu_has_mmips) { + /* MIPS16e mode */ + bcode = (instr[0] >> 5) & 0x3f; + } else if (mm_insn_16bit(instr[0])) { + /* 16-bit microMIPS BREAK */ + bcode = instr[0] & 0xf; + } else { + /* 32-bit microMIPS BREAK */ + if (__get_user(instr[1], (u16 __user *)(epc + 2))) + goto out_sigsegv; + opcode = (instr[0] << 16) | instr[1]; + bcode = (opcode >> 6) & ((1 << 20) - 1); + } + } else { + if (__get_user(opcode, (unsigned int __user *)epc)) + goto out_sigsegv; + bcode = (opcode >> 6) & ((1 << 20) - 1); + } + + /* + * There is the ancient bug in the MIPS assemblers that the break + * code starts left to bit 16 instead to bit 6 in the opcode. + * Gas is bug-compatible, but not always, grrr... + * We handle both cases with a simple heuristics. --macro + */ + if (bcode >= (1 << 10)) + bcode = ((bcode & ((1 << 10) - 1)) << 10) | (bcode >> 10); + + /* + * notify the kprobe handlers, if instruction is likely to + * pertain to them. + */ + switch (bcode) { + case BRK_UPROBE: + if (notify_die(DIE_UPROBE, "uprobe", regs, bcode, + current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP) + goto out; + else + break; + case BRK_UPROBE_XOL: + if (notify_die(DIE_UPROBE_XOL, "uprobe_xol", regs, bcode, + current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP) + goto out; + else + break; + case BRK_KPROBE_BP: + if (notify_die(DIE_BREAK, "debug", regs, bcode, + current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP) + goto out; + else + break; + case BRK_KPROBE_SSTEPBP: + if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, + current->thread.trap_nr, SIGTRAP) == NOTIFY_STOP) + goto out; + else + break; + default: + break; + } + + do_trap_or_bp(regs, bcode, TRAP_BRKPT, "Break"); + +out: + set_fs(seg); + exception_exit(prev_state); + return; + +out_sigsegv: + force_sig(SIGSEGV); + goto out; +} + +asmlinkage void do_tr(struct pt_regs *regs) +{ + u32 opcode, tcode = 0; + enum ctx_state prev_state; + u16 instr[2]; + mm_segment_t seg; + unsigned long epc = msk_isa16_mode(exception_epc(regs)); + + seg = get_fs(); + if (!user_mode(regs)) + set_fs(KERNEL_DS); + + prev_state = exception_enter(); + current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f; + if (get_isa16_mode(regs->cp0_epc)) { + if (__get_user(instr[0], (u16 __user *)(epc + 0)) || + __get_user(instr[1], (u16 __user *)(epc + 2))) + goto out_sigsegv; + opcode = (instr[0] << 16) | instr[1]; + /* Immediate versions don't provide a code. */ + if (!(opcode & OPCODE)) + tcode = (opcode >> 12) & ((1 << 4) - 1); + } else { + if (__get_user(opcode, (u32 __user *)epc)) + goto out_sigsegv; + /* Immediate versions don't provide a code. */ + if (!(opcode & OPCODE)) + tcode = (opcode >> 6) & ((1 << 10) - 1); + } + + do_trap_or_bp(regs, tcode, 0, "Trap"); + +out: + set_fs(seg); + exception_exit(prev_state); + return; + +out_sigsegv: + force_sig(SIGSEGV); + goto out; +} + +asmlinkage void do_ri(struct pt_regs *regs) +{ + unsigned int __user *epc = (unsigned int __user *)exception_epc(regs); + unsigned long old_epc = regs->cp0_epc; + unsigned long old31 = regs->regs[31]; + enum ctx_state prev_state; + unsigned int opcode = 0; + int status = -1; + + /* + * Avoid any kernel code. Just emulate the R2 instruction + * as quickly as possible. + */ + if (mipsr2_emulation && cpu_has_mips_r6 && + likely(user_mode(regs)) && + likely(get_user(opcode, epc) >= 0)) { + unsigned long fcr31 = 0; + + status = mipsr2_decoder(regs, opcode, &fcr31); + switch (status) { + case 0: + case SIGEMT: + return; + case SIGILL: + goto no_r2_instr; + default: + process_fpemu_return(status, + ¤t->thread.cp0_baduaddr, + fcr31); + return; + } + } + +no_r2_instr: + + prev_state = exception_enter(); + current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f; + + if (notify_die(DIE_RI, "RI Fault", regs, 0, current->thread.trap_nr, + SIGILL) == NOTIFY_STOP) + goto out; + + die_if_kernel("Reserved instruction in kernel code", regs); + + if (unlikely(compute_return_epc(regs) < 0)) + goto out; + + if (!get_isa16_mode(regs->cp0_epc)) { + if (unlikely(get_user(opcode, epc) < 0)) + status = SIGSEGV; + + if (!cpu_has_llsc && status < 0) + status = simulate_llsc(regs, opcode); + + if (status < 0) + status = simulate_rdhwr_normal(regs, opcode); + + if (status < 0) + status = simulate_sync(regs, opcode); + + if (status < 0) + status = simulate_fp(regs, opcode, old_epc, old31); + +#ifdef CONFIG_CPU_LOONGSON3_CPUCFG_EMULATION + if (status < 0) + status = simulate_loongson3_cpucfg(regs, opcode); +#endif + } else if (cpu_has_mmips) { + unsigned short mmop[2] = { 0 }; + + if (unlikely(get_user(mmop[0], (u16 __user *)epc + 0) < 0)) + status = SIGSEGV; + if (unlikely(get_user(mmop[1], (u16 __user *)epc + 1) < 0)) + status = SIGSEGV; + opcode = mmop[0]; + opcode = (opcode << 16) | mmop[1]; + + if (status < 0) + status = simulate_rdhwr_mm(regs, opcode); + } + + if (status < 0) + status = SIGILL; + + if (unlikely(status > 0)) { + regs->cp0_epc = old_epc; /* Undo skip-over. */ + regs->regs[31] = old31; + force_sig(status); + } + +out: + exception_exit(prev_state); +} + +/* + * No lock; only written during early bootup by CPU 0. + */ +static RAW_NOTIFIER_HEAD(cu2_chain); + +int __ref register_cu2_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&cu2_chain, nb); +} + +int cu2_notifier_call_chain(unsigned long val, void *v) +{ + return raw_notifier_call_chain(&cu2_chain, val, v); +} + +static int default_cu2_call(struct notifier_block *nfb, unsigned long action, + void *data) +{ + struct pt_regs *regs = data; + + die_if_kernel("COP2: Unhandled kernel unaligned access or invalid " + "instruction", regs); + force_sig(SIGILL); + + return NOTIFY_OK; +} + +#ifdef CONFIG_MIPS_FP_SUPPORT + +static int enable_restore_fp_context(int msa) +{ + int err, was_fpu_owner, prior_msa; + bool first_fp; + + /* Initialize context if it hasn't been used already */ + first_fp = init_fp_ctx(current); + + if (first_fp) { + preempt_disable(); + err = own_fpu_inatomic(1); + if (msa && !err) { + enable_msa(); + /* + * with MSA enabled, userspace can see MSACSR + * and MSA regs, but the values in them are from + * other task before current task, restore them + * from saved fp/msa context + */ + write_msa_csr(current->thread.fpu.msacsr); + /* + * own_fpu_inatomic(1) just restore low 64bit, + * fix the high 64bit + */ + init_msa_upper(); + set_thread_flag(TIF_USEDMSA); + set_thread_flag(TIF_MSA_CTX_LIVE); + } + preempt_enable(); + return err; + } + + /* + * This task has formerly used the FP context. + * + * If this thread has no live MSA vector context then we can simply + * restore the scalar FP context. If it has live MSA vector context + * (that is, it has or may have used MSA since last performing a + * function call) then we'll need to restore the vector context. This + * applies even if we're currently only executing a scalar FP + * instruction. This is because if we were to later execute an MSA + * instruction then we'd either have to: + * + * - Restore the vector context & clobber any registers modified by + * scalar FP instructions between now & then. + * + * or + * + * - Not restore the vector context & lose the most significant bits + * of all vector registers. + * + * Neither of those options is acceptable. We cannot restore the least + * significant bits of the registers now & only restore the most + * significant bits later because the most significant bits of any + * vector registers whose aliased FP register is modified now will have + * been zeroed. We'd have no way to know that when restoring the vector + * context & thus may load an outdated value for the most significant + * bits of a vector register. + */ + if (!msa && !thread_msa_context_live()) + return own_fpu(1); + + /* + * This task is using or has previously used MSA. Thus we require + * that Status.FR == 1. + */ + preempt_disable(); + was_fpu_owner = is_fpu_owner(); + err = own_fpu_inatomic(0); + if (err) + goto out; + + enable_msa(); + write_msa_csr(current->thread.fpu.msacsr); + set_thread_flag(TIF_USEDMSA); + + /* + * If this is the first time that the task is using MSA and it has + * previously used scalar FP in this time slice then we already nave + * FP context which we shouldn't clobber. We do however need to clear + * the upper 64b of each vector register so that this task has no + * opportunity to see data left behind by another. + */ + prior_msa = test_and_set_thread_flag(TIF_MSA_CTX_LIVE); + if (!prior_msa && was_fpu_owner) { + init_msa_upper(); + + goto out; + } + + if (!prior_msa) { + /* + * Restore the least significant 64b of each vector register + * from the existing scalar FP context. + */ + _restore_fp(current); + + /* + * The task has not formerly used MSA, so clear the upper 64b + * of each vector register such that it cannot see data left + * behind by another task. + */ + init_msa_upper(); + } else { + /* We need to restore the vector context. */ + restore_msa(current); + + /* Restore the scalar FP control & status register */ + if (!was_fpu_owner) + write_32bit_cp1_register(CP1_STATUS, + current->thread.fpu.fcr31); + } + +out: + preempt_enable(); + + return 0; +} + +#else /* !CONFIG_MIPS_FP_SUPPORT */ + +static int enable_restore_fp_context(int msa) +{ + return SIGILL; +} + +#endif /* CONFIG_MIPS_FP_SUPPORT */ + +asmlinkage void do_cpu(struct pt_regs *regs) +{ + enum ctx_state prev_state; + unsigned int __user *epc; + unsigned long old_epc, old31; + unsigned int opcode; + unsigned int cpid; + int status; + + prev_state = exception_enter(); + cpid = (regs->cp0_cause >> CAUSEB_CE) & 3; + + if (cpid != 2) + die_if_kernel("do_cpu invoked from kernel context!", regs); + + switch (cpid) { + case 0: + epc = (unsigned int __user *)exception_epc(regs); + old_epc = regs->cp0_epc; + old31 = regs->regs[31]; + opcode = 0; + status = -1; + + if (unlikely(compute_return_epc(regs) < 0)) + break; + + if (!get_isa16_mode(regs->cp0_epc)) { + if (unlikely(get_user(opcode, epc) < 0)) + status = SIGSEGV; + + if (!cpu_has_llsc && status < 0) + status = simulate_llsc(regs, opcode); + } + + if (status < 0) + status = SIGILL; + + if (unlikely(status > 0)) { + regs->cp0_epc = old_epc; /* Undo skip-over. */ + regs->regs[31] = old31; + force_sig(status); + } + + break; + +#ifdef CONFIG_MIPS_FP_SUPPORT + case 3: + /* + * The COP3 opcode space and consequently the CP0.Status.CU3 + * bit and the CP0.Cause.CE=3 encoding have been removed as + * of the MIPS III ISA. From the MIPS IV and MIPS32r2 ISAs + * up the space has been reused for COP1X instructions, that + * are enabled by the CP0.Status.CU1 bit and consequently + * use the CP0.Cause.CE=1 encoding for Coprocessor Unusable + * exceptions. Some FPU-less processors that implement one + * of these ISAs however use this code erroneously for COP1X + * instructions. Therefore we redirect this trap to the FP + * emulator too. + */ + if (raw_cpu_has_fpu || !cpu_has_mips_4_5_64_r2_r6) { + force_sig(SIGILL); + break; + } + fallthrough; + case 1: { + void __user *fault_addr; + unsigned long fcr31; + int err, sig; + + err = enable_restore_fp_context(0); + + if (raw_cpu_has_fpu && !err) + break; + + sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0, + &fault_addr); + + /* + * We can't allow the emulated instruction to leave + * any enabled Cause bits set in $fcr31. + */ + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; + + /* Send a signal if required. */ + if (!process_fpemu_return(sig, fault_addr, fcr31) && !err) + mt_ase_fp_affinity(); + + break; + } +#else /* CONFIG_MIPS_FP_SUPPORT */ + case 1: + case 3: + force_sig(SIGILL); + break; +#endif /* CONFIG_MIPS_FP_SUPPORT */ + + case 2: + raw_notifier_call_chain(&cu2_chain, CU2_EXCEPTION, regs); + break; + } + + exception_exit(prev_state); +} + +asmlinkage void do_msa_fpe(struct pt_regs *regs, unsigned int msacsr) +{ + enum ctx_state prev_state; + + prev_state = exception_enter(); + current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f; + if (notify_die(DIE_MSAFP, "MSA FP exception", regs, 0, + current->thread.trap_nr, SIGFPE) == NOTIFY_STOP) + goto out; + + /* Clear MSACSR.Cause before enabling interrupts */ + write_msa_csr(msacsr & ~MSA_CSR_CAUSEF); + local_irq_enable(); + + die_if_kernel("do_msa_fpe invoked from kernel context!", regs); + force_sig(SIGFPE); +out: + exception_exit(prev_state); +} + +asmlinkage void do_msa(struct pt_regs *regs) +{ + enum ctx_state prev_state; + int err; + + prev_state = exception_enter(); + + if (!cpu_has_msa || test_thread_flag(TIF_32BIT_FPREGS)) { + force_sig(SIGILL); + goto out; + } + + die_if_kernel("do_msa invoked from kernel context!", regs); + + err = enable_restore_fp_context(1); + if (err) + force_sig(SIGILL); +out: + exception_exit(prev_state); +} + +asmlinkage void do_mdmx(struct pt_regs *regs) +{ + enum ctx_state prev_state; + + prev_state = exception_enter(); + force_sig(SIGILL); + exception_exit(prev_state); +} + +/* + * Called with interrupts disabled. + */ +asmlinkage void do_watch(struct pt_regs *regs) +{ + enum ctx_state prev_state; + + prev_state = exception_enter(); + /* + * Clear WP (bit 22) bit of cause register so we don't loop + * forever. + */ + clear_c0_cause(CAUSEF_WP); + + /* + * If the current thread has the watch registers loaded, save + * their values and send SIGTRAP. Otherwise another thread + * left the registers set, clear them and continue. + */ + if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) { + mips_read_watch_registers(); + local_irq_enable(); + force_sig_fault(SIGTRAP, TRAP_HWBKPT, NULL); + } else { + mips_clear_watch_registers(); + local_irq_enable(); + } + exception_exit(prev_state); +} + +asmlinkage void do_mcheck(struct pt_regs *regs) +{ + int multi_match = regs->cp0_status & ST0_TS; + enum ctx_state prev_state; + mm_segment_t old_fs = get_fs(); + + prev_state = exception_enter(); + show_regs(regs); + + if (multi_match) { + dump_tlb_regs(); + pr_info("\n"); + dump_tlb_all(); + } + + if (!user_mode(regs)) + set_fs(KERNEL_DS); + + show_code((unsigned int __user *) regs->cp0_epc); + + set_fs(old_fs); + + /* + * Some chips may have other causes of machine check (e.g. SB1 + * graduation timer) + */ + panic("Caught Machine Check exception - %scaused by multiple " + "matching entries in the TLB.", + (multi_match) ? "" : "not "); +} + +asmlinkage void do_mt(struct pt_regs *regs) +{ + int subcode; + + subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT) + >> VPECONTROL_EXCPT_SHIFT; + switch (subcode) { + case 0: + printk(KERN_DEBUG "Thread Underflow\n"); + break; + case 1: + printk(KERN_DEBUG "Thread Overflow\n"); + break; + case 2: + printk(KERN_DEBUG "Invalid YIELD Qualifier\n"); + break; + case 3: + printk(KERN_DEBUG "Gating Storage Exception\n"); + break; + case 4: + printk(KERN_DEBUG "YIELD Scheduler Exception\n"); + break; + case 5: + printk(KERN_DEBUG "Gating Storage Scheduler Exception\n"); + break; + default: + printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n", + subcode); + break; + } + die_if_kernel("MIPS MT Thread exception in kernel", regs); + + force_sig(SIGILL); +} + + +asmlinkage void do_dsp(struct pt_regs *regs) +{ + if (cpu_has_dsp) + panic("Unexpected DSP exception"); + + force_sig(SIGILL); +} + +asmlinkage void do_reserved(struct pt_regs *regs) +{ + /* + * Game over - no way to handle this if it ever occurs. Most probably + * caused by a new unknown cpu type or after another deadly + * hard/software error. + */ + show_regs(regs); + panic("Caught reserved exception %ld - should not happen.", + (regs->cp0_cause & 0x7f) >> 2); +} + +static int __initdata l1parity = 1; +static int __init nol1parity(char *s) +{ + l1parity = 0; + return 1; +} +__setup("nol1par", nol1parity); +static int __initdata l2parity = 1; +static int __init nol2parity(char *s) +{ + l2parity = 0; + return 1; +} +__setup("nol2par", nol2parity); + +/* + * Some MIPS CPUs can enable/disable for cache parity detection, but do + * it different ways. + */ +static inline __init void parity_protection_init(void) +{ +#define ERRCTL_PE 0x80000000 +#define ERRCTL_L2P 0x00800000 + + if (mips_cm_revision() >= CM_REV_CM3) { + ulong gcr_ectl, cp0_ectl; + + /* + * With CM3 systems we need to ensure that the L1 & L2 + * parity enables are set to the same value, since this + * is presumed by the hardware engineers. + * + * If the user disabled either of L1 or L2 ECC checking, + * disable both. + */ + l1parity &= l2parity; + l2parity &= l1parity; + + /* Probe L1 ECC support */ + cp0_ectl = read_c0_ecc(); + write_c0_ecc(cp0_ectl | ERRCTL_PE); + back_to_back_c0_hazard(); + cp0_ectl = read_c0_ecc(); + + /* Probe L2 ECC support */ + gcr_ectl = read_gcr_err_control(); + + if (!(gcr_ectl & CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT) || + !(cp0_ectl & ERRCTL_PE)) { + /* + * One of L1 or L2 ECC checking isn't supported, + * so we cannot enable either. + */ + l1parity = l2parity = 0; + } + + /* Configure L1 ECC checking */ + if (l1parity) + cp0_ectl |= ERRCTL_PE; + else + cp0_ectl &= ~ERRCTL_PE; + write_c0_ecc(cp0_ectl); + back_to_back_c0_hazard(); + WARN_ON(!!(read_c0_ecc() & ERRCTL_PE) != l1parity); + + /* Configure L2 ECC checking */ + if (l2parity) + gcr_ectl |= CM_GCR_ERR_CONTROL_L2_ECC_EN; + else + gcr_ectl &= ~CM_GCR_ERR_CONTROL_L2_ECC_EN; + write_gcr_err_control(gcr_ectl); + gcr_ectl = read_gcr_err_control(); + gcr_ectl &= CM_GCR_ERR_CONTROL_L2_ECC_EN; + WARN_ON(!!gcr_ectl != l2parity); + + pr_info("Cache parity protection %sabled\n", + l1parity ? "en" : "dis"); + return; + } + + switch (current_cpu_type()) { + case CPU_24K: + case CPU_34K: + case CPU_74K: + case CPU_1004K: + case CPU_1074K: + case CPU_INTERAPTIV: + case CPU_PROAPTIV: + case CPU_P5600: + case CPU_QEMU_GENERIC: + case CPU_P6600: + { + unsigned long errctl; + unsigned int l1parity_present, l2parity_present; + + errctl = read_c0_ecc(); + errctl &= ~(ERRCTL_PE|ERRCTL_L2P); + + /* probe L1 parity support */ + write_c0_ecc(errctl | ERRCTL_PE); + back_to_back_c0_hazard(); + l1parity_present = (read_c0_ecc() & ERRCTL_PE); + + /* probe L2 parity support */ + write_c0_ecc(errctl|ERRCTL_L2P); + back_to_back_c0_hazard(); + l2parity_present = (read_c0_ecc() & ERRCTL_L2P); + + if (l1parity_present && l2parity_present) { + if (l1parity) + errctl |= ERRCTL_PE; + if (l1parity ^ l2parity) + errctl |= ERRCTL_L2P; + } else if (l1parity_present) { + if (l1parity) + errctl |= ERRCTL_PE; + } else if (l2parity_present) { + if (l2parity) + errctl |= ERRCTL_L2P; + } else { + /* No parity available */ + } + + printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl); + + write_c0_ecc(errctl); + back_to_back_c0_hazard(); + errctl = read_c0_ecc(); + printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl); + + if (l1parity_present) + printk(KERN_INFO "Cache parity protection %sabled\n", + (errctl & ERRCTL_PE) ? "en" : "dis"); + + if (l2parity_present) { + if (l1parity_present && l1parity) + errctl ^= ERRCTL_L2P; + printk(KERN_INFO "L2 cache parity protection %sabled\n", + (errctl & ERRCTL_L2P) ? "en" : "dis"); + } + } + break; + + case CPU_5KC: + case CPU_5KE: + case CPU_LOONGSON32: + write_c0_ecc(0x80000000); + back_to_back_c0_hazard(); + /* Set the PE bit (bit 31) in the c0_errctl register. */ + printk(KERN_INFO "Cache parity protection %sabled\n", + (read_c0_ecc() & 0x80000000) ? "en" : "dis"); + break; + case CPU_20KC: + case CPU_25KF: + /* Clear the DE bit (bit 16) in the c0_status register. */ + printk(KERN_INFO "Enable cache parity protection for " + "MIPS 20KC/25KF CPUs.\n"); + clear_c0_status(ST0_DE); + break; + default: + break; + } +} + +asmlinkage void cache_parity_error(void) +{ + const int field = 2 * sizeof(unsigned long); + unsigned int reg_val; + + /* For the moment, report the problem and hang. */ + printk("Cache error exception:\n"); + printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc()); + reg_val = read_c0_cacheerr(); + printk("c0_cacheerr == %08x\n", reg_val); + + printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n", + reg_val & (1<<30) ? "secondary" : "primary", + reg_val & (1<<31) ? "data" : "insn"); + if ((cpu_has_mips_r2_r6) && + ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) { + pr_err("Error bits: %s%s%s%s%s%s%s%s\n", + reg_val & (1<<29) ? "ED " : "", + reg_val & (1<<28) ? "ET " : "", + reg_val & (1<<27) ? "ES " : "", + reg_val & (1<<26) ? "EE " : "", + reg_val & (1<<25) ? "EB " : "", + reg_val & (1<<24) ? "EI " : "", + reg_val & (1<<23) ? "E1 " : "", + reg_val & (1<<22) ? "E0 " : ""); + } else { + pr_err("Error bits: %s%s%s%s%s%s%s\n", + reg_val & (1<<29) ? "ED " : "", + reg_val & (1<<28) ? "ET " : "", + reg_val & (1<<26) ? "EE " : "", + reg_val & (1<<25) ? "EB " : "", + reg_val & (1<<24) ? "EI " : "", + reg_val & (1<<23) ? "E1 " : "", + reg_val & (1<<22) ? "E0 " : ""); + } + printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1)); + +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + if (reg_val & (1<<22)) + printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0()); + + if (reg_val & (1<<23)) + printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1()); +#endif + + panic("Can't handle the cache error!"); +} + +asmlinkage void do_ftlb(void) +{ + const int field = 2 * sizeof(unsigned long); + unsigned int reg_val; + + /* For the moment, report the problem and hang. */ + if ((cpu_has_mips_r2_r6) && + (((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS) || + ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_LOONGSON))) { + pr_err("FTLB error exception, cp0_ecc=0x%08x:\n", + read_c0_ecc()); + pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc()); + reg_val = read_c0_cacheerr(); + pr_err("c0_cacheerr == %08x\n", reg_val); + + if ((reg_val & 0xc0000000) == 0xc0000000) { + pr_err("Decoded c0_cacheerr: FTLB parity error\n"); + } else { + pr_err("Decoded c0_cacheerr: %s cache fault in %s reference.\n", + reg_val & (1<<30) ? "secondary" : "primary", + reg_val & (1<<31) ? "data" : "insn"); + } + } else { + pr_err("FTLB error exception\n"); + } + /* Just print the cacheerr bits for now */ + cache_parity_error(); +} + +asmlinkage void do_gsexc(struct pt_regs *regs, u32 diag1) +{ + u32 exccode = (diag1 & LOONGSON_DIAG1_EXCCODE) >> + LOONGSON_DIAG1_EXCCODE_SHIFT; + enum ctx_state prev_state; + + prev_state = exception_enter(); + + switch (exccode) { + case 0x08: + /* Undocumented exception, will trigger on certain + * also-undocumented instructions accessible from userspace. + * Processor state is not otherwise corrupted, but currently + * we don't know how to proceed. Maybe there is some + * undocumented control flag to enable the instructions? + */ + force_sig(SIGILL); + break; + + default: + /* None of the other exceptions, documented or not, have + * further details given; none are encountered in the wild + * either. Panic in case some of them turn out to be fatal. + */ + show_regs(regs); + panic("Unhandled Loongson exception - GSCause = %08x", diag1); + } + + exception_exit(prev_state); +} + +/* + * SDBBP EJTAG debug exception handler. + * We skip the instruction and return to the next instruction. + */ +void ejtag_exception_handler(struct pt_regs *regs) +{ + const int field = 2 * sizeof(unsigned long); + unsigned long depc, old_epc, old_ra; + unsigned int debug; + + printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n"); + depc = read_c0_depc(); + debug = read_c0_debug(); + printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug); + if (debug & 0x80000000) { + /* + * In branch delay slot. + * We cheat a little bit here and use EPC to calculate the + * debug return address (DEPC). EPC is restored after the + * calculation. + */ + old_epc = regs->cp0_epc; + old_ra = regs->regs[31]; + regs->cp0_epc = depc; + compute_return_epc(regs); + depc = regs->cp0_epc; + regs->cp0_epc = old_epc; + regs->regs[31] = old_ra; + } else + depc += 4; + write_c0_depc(depc); + +#if 0 + printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n"); + write_c0_debug(debug | 0x100); +#endif +} + +/* + * NMI exception handler. + * No lock; only written during early bootup by CPU 0. + */ +static RAW_NOTIFIER_HEAD(nmi_chain); + +int register_nmi_notifier(struct notifier_block *nb) +{ + return raw_notifier_chain_register(&nmi_chain, nb); +} + +void __noreturn nmi_exception_handler(struct pt_regs *regs) +{ + char str[100]; + + nmi_enter(); + raw_notifier_call_chain(&nmi_chain, 0, regs); + bust_spinlocks(1); + snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n", + smp_processor_id(), regs->cp0_epc); + regs->cp0_epc = read_c0_errorepc(); + die(str, regs); + nmi_exit(); +} + +#define VECTORSPACING 0x100 /* for EI/VI mode */ + +unsigned long ebase; +EXPORT_SYMBOL_GPL(ebase); +unsigned long exception_handlers[32]; +unsigned long vi_handlers[64]; + +void __init *set_except_vector(int n, void *addr) +{ + unsigned long handler = (unsigned long) addr; + unsigned long old_handler; + +#ifdef CONFIG_CPU_MICROMIPS + /* + * Only the TLB handlers are cache aligned with an even + * address. All other handlers are on an odd address and + * require no modification. Otherwise, MIPS32 mode will + * be entered when handling any TLB exceptions. That + * would be bad...since we must stay in microMIPS mode. + */ + if (!(handler & 0x1)) + handler |= 1; +#endif + old_handler = xchg(&exception_handlers[n], handler); + + if (n == 0 && cpu_has_divec) { +#ifdef CONFIG_CPU_MICROMIPS + unsigned long jump_mask = ~((1 << 27) - 1); +#else + unsigned long jump_mask = ~((1 << 28) - 1); +#endif + u32 *buf = (u32 *)(ebase + 0x200); + unsigned int k0 = 26; + if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) { + uasm_i_j(&buf, handler & ~jump_mask); + uasm_i_nop(&buf); + } else { + UASM_i_LA(&buf, k0, handler); + uasm_i_jr(&buf, k0); + uasm_i_nop(&buf); + } + local_flush_icache_range(ebase + 0x200, (unsigned long)buf); + } + return (void *)old_handler; +} + +static void do_default_vi(void) +{ + show_regs(get_irq_regs()); + panic("Caught unexpected vectored interrupt."); +} + +static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs) +{ + unsigned long handler; + unsigned long old_handler = vi_handlers[n]; + int srssets = current_cpu_data.srsets; + u16 *h; + unsigned char *b; + + BUG_ON(!cpu_has_veic && !cpu_has_vint); + + if (addr == NULL) { + handler = (unsigned long) do_default_vi; + srs = 0; + } else + handler = (unsigned long) addr; + vi_handlers[n] = handler; + + b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING); + + if (srs >= srssets) + panic("Shadow register set %d not supported", srs); + + if (cpu_has_veic) { + if (board_bind_eic_interrupt) + board_bind_eic_interrupt(n, srs); + } else if (cpu_has_vint) { + /* SRSMap is only defined if shadow sets are implemented */ + if (srssets > 1) + change_c0_srsmap(0xf << n*4, srs << n*4); + } + + if (srs == 0) { + /* + * If no shadow set is selected then use the default handler + * that does normal register saving and standard interrupt exit + */ + extern const u8 except_vec_vi[], except_vec_vi_lui[]; + extern const u8 except_vec_vi_ori[], except_vec_vi_end[]; + extern const u8 rollback_except_vec_vi[]; + const u8 *vec_start = using_rollback_handler() ? + rollback_except_vec_vi : except_vec_vi; +#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_BIG_ENDIAN) + const int lui_offset = except_vec_vi_lui - vec_start + 2; + const int ori_offset = except_vec_vi_ori - vec_start + 2; +#else + const int lui_offset = except_vec_vi_lui - vec_start; + const int ori_offset = except_vec_vi_ori - vec_start; +#endif + const int handler_len = except_vec_vi_end - vec_start; + + if (handler_len > VECTORSPACING) { + /* + * Sigh... panicing won't help as the console + * is probably not configured :( + */ + panic("VECTORSPACING too small"); + } + + set_handler(((unsigned long)b - ebase), vec_start, +#ifdef CONFIG_CPU_MICROMIPS + (handler_len - 1)); +#else + handler_len); +#endif + h = (u16 *)(b + lui_offset); + *h = (handler >> 16) & 0xffff; + h = (u16 *)(b + ori_offset); + *h = (handler & 0xffff); + local_flush_icache_range((unsigned long)b, + (unsigned long)(b+handler_len)); + } + else { + /* + * In other cases jump directly to the interrupt handler. It + * is the handler's responsibility to save registers if required + * (eg hi/lo) and return from the exception using "eret". + */ + u32 insn; + + h = (u16 *)b; + /* j handler */ +#ifdef CONFIG_CPU_MICROMIPS + insn = 0xd4000000 | (((u32)handler & 0x07ffffff) >> 1); +#else + insn = 0x08000000 | (((u32)handler & 0x0fffffff) >> 2); +#endif + h[0] = (insn >> 16) & 0xffff; + h[1] = insn & 0xffff; + h[2] = 0; + h[3] = 0; + local_flush_icache_range((unsigned long)b, + (unsigned long)(b+8)); + } + + return (void *)old_handler; +} + +void *set_vi_handler(int n, vi_handler_t addr) +{ + return set_vi_srs_handler(n, addr, 0); +} + +extern void tlb_init(void); + +/* + * Timer interrupt + */ +int cp0_compare_irq; +EXPORT_SYMBOL_GPL(cp0_compare_irq); +int cp0_compare_irq_shift; + +/* + * Performance counter IRQ or -1 if shared with timer + */ +int cp0_perfcount_irq; +EXPORT_SYMBOL_GPL(cp0_perfcount_irq); + +/* + * Fast debug channel IRQ or -1 if not present + */ +int cp0_fdc_irq; +EXPORT_SYMBOL_GPL(cp0_fdc_irq); + +static int noulri; + +static int __init ulri_disable(char *s) +{ + pr_info("Disabling ulri\n"); + noulri = 1; + + return 1; +} +__setup("noulri", ulri_disable); + +/* configure STATUS register */ +static void configure_status(void) +{ + /* + * Disable coprocessors and select 32-bit or 64-bit addressing + * and the 16/32 or 32/32 FPR register model. Reset the BEV + * flag that some firmware may have left set and the TS bit (for + * IP27). Set XX for ISA IV code to work. + */ + unsigned int status_set = ST0_KERNEL_CUMASK; +#ifdef CONFIG_64BIT + status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX; +#endif + if (current_cpu_data.isa_level & MIPS_CPU_ISA_IV) + status_set |= ST0_XX; + if (cpu_has_dsp) + status_set |= ST0_MX; + + change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, + status_set); + back_to_back_c0_hazard(); +} + +unsigned int hwrena; +EXPORT_SYMBOL_GPL(hwrena); + +/* configure HWRENA register */ +static void configure_hwrena(void) +{ + hwrena = cpu_hwrena_impl_bits; + + if (cpu_has_mips_r2_r6) + hwrena |= MIPS_HWRENA_CPUNUM | + MIPS_HWRENA_SYNCISTEP | + MIPS_HWRENA_CC | + MIPS_HWRENA_CCRES; + + if (!noulri && cpu_has_userlocal) + hwrena |= MIPS_HWRENA_ULR; + + if (hwrena) + write_c0_hwrena(hwrena); +} + +static void configure_exception_vector(void) +{ + if (cpu_has_mips_r2_r6) { + unsigned long sr = set_c0_status(ST0_BEV); + /* If available, use WG to set top bits of EBASE */ + if (cpu_has_ebase_wg) { +#ifdef CONFIG_64BIT + write_c0_ebase_64(ebase | MIPS_EBASE_WG); +#else + write_c0_ebase(ebase | MIPS_EBASE_WG); +#endif + } + write_c0_ebase(ebase); + write_c0_status(sr); + } + if (cpu_has_veic || cpu_has_vint) { + /* Setting vector spacing enables EI/VI mode */ + change_c0_intctl(0x3e0, VECTORSPACING); + } + if (cpu_has_divec) { + if (cpu_has_mipsmt) { + unsigned int vpflags = dvpe(); + set_c0_cause(CAUSEF_IV); + evpe(vpflags); + } else + set_c0_cause(CAUSEF_IV); + } +} + +void per_cpu_trap_init(bool is_boot_cpu) +{ + unsigned int cpu = smp_processor_id(); + + configure_status(); + configure_hwrena(); + + configure_exception_vector(); + + /* + * Before R2 both interrupt numbers were fixed to 7, so on R2 only: + * + * o read IntCtl.IPTI to determine the timer interrupt + * o read IntCtl.IPPCI to determine the performance counter interrupt + * o read IntCtl.IPFDC to determine the fast debug channel interrupt + */ + if (cpu_has_mips_r2_r6) { + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; + cp0_fdc_irq = (read_c0_intctl() >> INTCTLB_IPFDC) & 7; + if (!cp0_fdc_irq) + cp0_fdc_irq = -1; + + } else { + cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; + cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ; + cp0_perfcount_irq = -1; + cp0_fdc_irq = -1; + } + + if (cpu_has_mmid) + cpu_data[cpu].asid_cache = 0; + else if (!cpu_data[cpu].asid_cache) + cpu_data[cpu].asid_cache = asid_first_version(cpu); + + mmgrab(&init_mm); + current->active_mm = &init_mm; + BUG_ON(current->mm); + enter_lazy_tlb(&init_mm, current); + + /* Boot CPU's cache setup in setup_arch(). */ + if (!is_boot_cpu) + cpu_cache_init(); + tlb_init(); + TLBMISS_HANDLER_SETUP(); +} + +/* Install CPU exception handler */ +void set_handler(unsigned long offset, const void *addr, unsigned long size) +{ +#ifdef CONFIG_CPU_MICROMIPS + memcpy((void *)(ebase + offset), ((unsigned char *)addr - 1), size); +#else + memcpy((void *)(ebase + offset), addr, size); +#endif + local_flush_icache_range(ebase + offset, ebase + offset + size); +} + +static const char panic_null_cerr[] = + "Trying to set NULL cache error exception handler\n"; + +/* + * Install uncached CPU exception handler. + * This is suitable only for the cache error exception which is the only + * exception handler that is being run uncached. + */ +void set_uncached_handler(unsigned long offset, void *addr, + unsigned long size) +{ + unsigned long uncached_ebase = CKSEG1ADDR(ebase); + + if (!addr) + panic(panic_null_cerr); + + memcpy((void *)(uncached_ebase + offset), addr, size); +} + +static int __initdata rdhwr_noopt; +static int __init set_rdhwr_noopt(char *str) +{ + rdhwr_noopt = 1; + return 1; +} + +__setup("rdhwr_noopt", set_rdhwr_noopt); + +void __init trap_init(void) +{ + extern char except_vec3_generic; + extern char except_vec4; + extern char except_vec3_r4000; + unsigned long i, vec_size; + phys_addr_t ebase_pa; + + check_wait(); + + if (!cpu_has_mips_r2_r6) { + ebase = CAC_BASE; + ebase_pa = virt_to_phys((void *)ebase); + vec_size = 0x400; + + memblock_reserve(ebase_pa, vec_size); + } else { + if (cpu_has_veic || cpu_has_vint) + vec_size = 0x200 + VECTORSPACING*64; + else + vec_size = PAGE_SIZE; + + ebase_pa = memblock_phys_alloc(vec_size, 1 << fls(vec_size)); + if (!ebase_pa) + panic("%s: Failed to allocate %lu bytes align=0x%x\n", + __func__, vec_size, 1 << fls(vec_size)); + + /* + * Try to ensure ebase resides in KSeg0 if possible. + * + * It shouldn't generally be in XKPhys on MIPS64 to avoid + * hitting a poorly defined exception base for Cache Errors. + * The allocation is likely to be in the low 512MB of physical, + * in which case we should be able to convert to KSeg0. + * + * EVA is special though as it allows segments to be rearranged + * and to become uncached during cache error handling. + */ + if (!IS_ENABLED(CONFIG_EVA) && !WARN_ON(ebase_pa >= 0x20000000)) + ebase = CKSEG0ADDR(ebase_pa); + else + ebase = (unsigned long)phys_to_virt(ebase_pa); + } + + if (cpu_has_mmips) { + unsigned int config3 = read_c0_config3(); + + if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) + write_c0_config3(config3 | MIPS_CONF3_ISA_OE); + else + write_c0_config3(config3 & ~MIPS_CONF3_ISA_OE); + } + + if (board_ebase_setup) + board_ebase_setup(); + per_cpu_trap_init(true); + memblock_set_bottom_up(false); + + /* + * Copy the generic exception handlers to their final destination. + * This will be overridden later as suitable for a particular + * configuration. + */ + set_handler(0x180, &except_vec3_generic, 0x80); + + /* + * Setup default vectors + */ + for (i = 0; i <= 31; i++) + set_except_vector(i, handle_reserved); + + /* + * Copy the EJTAG debug exception vector handler code to it's final + * destination. + */ + if (cpu_has_ejtag && board_ejtag_handler_setup) + board_ejtag_handler_setup(); + + /* + * Only some CPUs have the watch exceptions. + */ + if (cpu_has_watch) + set_except_vector(EXCCODE_WATCH, handle_watch); + + /* + * Initialise interrupt handlers + */ + if (cpu_has_veic || cpu_has_vint) { + int nvec = cpu_has_veic ? 64 : 8; + for (i = 0; i < nvec; i++) + set_vi_handler(i, NULL); + } + else if (cpu_has_divec) + set_handler(0x200, &except_vec4, 0x8); + + /* + * Some CPUs can enable/disable for cache parity detection, but does + * it different ways. + */ + parity_protection_init(); + + /* + * The Data Bus Errors / Instruction Bus Errors are signaled + * by external hardware. Therefore these two exceptions + * may have board specific handlers. + */ + if (board_be_init) + board_be_init(); + + set_except_vector(EXCCODE_INT, using_rollback_handler() ? + rollback_handle_int : handle_int); + set_except_vector(EXCCODE_MOD, handle_tlbm); + set_except_vector(EXCCODE_TLBL, handle_tlbl); + set_except_vector(EXCCODE_TLBS, handle_tlbs); + + set_except_vector(EXCCODE_ADEL, handle_adel); + set_except_vector(EXCCODE_ADES, handle_ades); + + set_except_vector(EXCCODE_IBE, handle_ibe); + set_except_vector(EXCCODE_DBE, handle_dbe); + + set_except_vector(EXCCODE_SYS, handle_sys); + set_except_vector(EXCCODE_BP, handle_bp); + + if (rdhwr_noopt) + set_except_vector(EXCCODE_RI, handle_ri); + else { + if (cpu_has_vtag_icache) + set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp); + else if (current_cpu_type() == CPU_LOONGSON64) + set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp); + else + set_except_vector(EXCCODE_RI, handle_ri_rdhwr); + } + + set_except_vector(EXCCODE_CPU, handle_cpu); + set_except_vector(EXCCODE_OV, handle_ov); + set_except_vector(EXCCODE_TR, handle_tr); + set_except_vector(EXCCODE_MSAFPE, handle_msa_fpe); + + if (board_nmi_handler_setup) + board_nmi_handler_setup(); + + if (cpu_has_fpu && !cpu_has_nofpuex) + set_except_vector(EXCCODE_FPE, handle_fpe); + + if (cpu_has_ftlbparex) + set_except_vector(MIPS_EXCCODE_TLBPAR, handle_ftlb); + + if (cpu_has_gsexcex) + set_except_vector(LOONGSON_EXCCODE_GSEXC, handle_gsexc); + + if (cpu_has_rixiex) { + set_except_vector(EXCCODE_TLBRI, tlb_do_page_fault_0); + set_except_vector(EXCCODE_TLBXI, tlb_do_page_fault_0); + } + + set_except_vector(EXCCODE_MSADIS, handle_msa); + set_except_vector(EXCCODE_MDMX, handle_mdmx); + + if (cpu_has_mcheck) + set_except_vector(EXCCODE_MCHECK, handle_mcheck); + + if (cpu_has_mipsmt) + set_except_vector(EXCCODE_THREAD, handle_mt); + + set_except_vector(EXCCODE_DSPDIS, handle_dsp); + + if (board_cache_error_setup) + board_cache_error_setup(); + + if (cpu_has_vce) + /* Special exception: R4[04]00 uses also the divec space. */ + set_handler(0x180, &except_vec3_r4000, 0x100); + else if (cpu_has_4kex) + set_handler(0x180, &except_vec3_generic, 0x80); + else + set_handler(0x080, &except_vec3_generic, 0x80); + + local_flush_icache_range(ebase, ebase + vec_size); + + sort_extable(__start___dbe_table, __stop___dbe_table); + + cu2_notifier(default_cu2_call, 0x80000000); /* Run last */ +} + +static int trap_pm_notifier(struct notifier_block *self, unsigned long cmd, + void *v) +{ + switch (cmd) { + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + configure_status(); + configure_hwrena(); + configure_exception_vector(); + + /* Restore register with CPU number for TLB handlers */ + TLBMISS_HANDLER_RESTORE(); + + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block trap_pm_notifier_block = { + .notifier_call = trap_pm_notifier, +}; + +static int __init trap_pm_init(void) +{ + return cpu_pm_register_notifier(&trap_pm_notifier_block); +} +arch_initcall(trap_pm_init); diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c new file mode 100644 index 000000000..126a5f3f4 --- /dev/null +++ b/arch/mips/kernel/unaligned.c @@ -0,0 +1,1610 @@ +/* + * Handle unaligned accesses by emulation. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle + * Copyright (C) 1999 Silicon Graphics, Inc. + * Copyright (C) 2014 Imagination Technologies Ltd. + * + * This file contains exception handler for address error exception with the + * special capability to execute faulting instructions in software. The + * handler does not try to handle the case when the program counter points + * to an address not aligned to a word boundary. + * + * Putting data to unaligned addresses is a bad practice even on Intel where + * only the performance is affected. Much worse is that such code is non- + * portable. Due to several programs that die on MIPS due to alignment + * problems I decided to implement this handler anyway though I originally + * didn't intend to do this at all for user code. + * + * For now I enable fixing of address errors by default to make life easier. + * I however intend to disable this somewhen in the future when the alignment + * problems with user programs have been fixed. For programmers this is the + * right way to go. + * + * Fixing address errors is a per process option. The option is inherited + * across fork(2) and execve(2) calls. If you really want to use the + * option in your user programs - I discourage the use of the software + * emulation strongly - use the following code in your userland stuff: + * + * #include <sys/sysmips.h> + * + * ... + * sysmips(MIPS_FIXADE, x); + * ... + * + * The argument x is 0 for disabling software emulation, enabled otherwise. + * + * Below a little program to play around with this feature. + * + * #include <stdio.h> + * #include <sys/sysmips.h> + * + * struct foo { + * unsigned char bar[8]; + * }; + * + * main(int argc, char *argv[]) + * { + * struct foo x = {0, 1, 2, 3, 4, 5, 6, 7}; + * unsigned int *p = (unsigned int *) (x.bar + 3); + * int i; + * + * if (argc > 1) + * sysmips(MIPS_FIXADE, atoi(argv[1])); + * + * printf("*p = %08lx\n", *p); + * + * *p = 0xdeadface; + * + * for(i = 0; i <= 7; i++) + * printf("%02x ", x.bar[i]); + * printf("\n"); + * } + * + * Coprocessor loads are not supported; I think this case is unimportant + * in the practice. + * + * TODO: Handle ndc (attempted store to doubleword in uncached memory) + * exception for the R6000. + * A store crossing a page boundary might be executed only partially. + * Undo the partial store in this case. + */ +#include <linux/context_tracking.h> +#include <linux/mm.h> +#include <linux/signal.h> +#include <linux/smp.h> +#include <linux/sched.h> +#include <linux/debugfs.h> +#include <linux/perf_event.h> + +#include <asm/asm.h> +#include <asm/branch.h> +#include <asm/byteorder.h> +#include <asm/cop2.h> +#include <asm/debug.h> +#include <asm/fpu.h> +#include <asm/fpu_emulator.h> +#include <asm/inst.h> +#include <asm/unaligned-emul.h> +#include <asm/mmu_context.h> +#include <linux/uaccess.h> + +enum { + UNALIGNED_ACTION_QUIET, + UNALIGNED_ACTION_SIGNAL, + UNALIGNED_ACTION_SHOW, +}; +#ifdef CONFIG_DEBUG_FS +static u32 unaligned_instructions; +static u32 unaligned_action; +#else +#define unaligned_action UNALIGNED_ACTION_QUIET +#endif +extern void show_registers(struct pt_regs *regs); + +static void emulate_load_store_insn(struct pt_regs *regs, + void __user *addr, unsigned int __user *pc) +{ + unsigned long origpc, orig31, value; + union mips_instruction insn; + unsigned int res; +#ifdef CONFIG_EVA + mm_segment_t seg; +#endif + origpc = (unsigned long)pc; + orig31 = regs->regs[31]; + + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0); + + /* + * This load never faults. + */ + __get_user(insn.word, pc); + + switch (insn.i_format.opcode) { + /* + * These are instructions that a compiler doesn't generate. We + * can assume therefore that the code is MIPS-aware and + * really buggy. Emulating these instructions would break the + * semantics anyway. + */ + case ll_op: + case lld_op: + case sc_op: + case scd_op: + + /* + * For these instructions the only way to create an address + * error is an attempted access to kernel/supervisor address + * space. + */ + case ldl_op: + case ldr_op: + case lwl_op: + case lwr_op: + case sdl_op: + case sdr_op: + case swl_op: + case swr_op: + case lb_op: + case lbu_op: + case sb_op: + goto sigbus; + + /* + * The remaining opcodes are the ones that are really of + * interest. + */ + case spec3_op: + if (insn.dsp_format.func == lx_op) { + switch (insn.dsp_format.op) { + case lwx_op: + if (!access_ok(addr, 4)) + goto sigbus; + LoadW(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.dsp_format.rd] = value; + break; + case lhx_op: + if (!access_ok(addr, 2)) + goto sigbus; + LoadHW(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.dsp_format.rd] = value; + break; + default: + goto sigill; + } + } +#ifdef CONFIG_EVA + else { + /* + * we can land here only from kernel accessing user + * memory, so we need to "switch" the address limit to + * user space, so that address check can work properly. + */ + seg = force_uaccess_begin(); + switch (insn.spec3_format.func) { + case lhe_op: + if (!access_ok(addr, 2)) { + force_uaccess_end(seg); + goto sigbus; + } + LoadHWE(addr, value, res); + if (res) { + force_uaccess_end(seg); + goto fault; + } + compute_return_epc(regs); + regs->regs[insn.spec3_format.rt] = value; + break; + case lwe_op: + if (!access_ok(addr, 4)) { + force_uaccess_end(seg); + goto sigbus; + } + LoadWE(addr, value, res); + if (res) { + force_uaccess_end(seg); + goto fault; + } + compute_return_epc(regs); + regs->regs[insn.spec3_format.rt] = value; + break; + case lhue_op: + if (!access_ok(addr, 2)) { + force_uaccess_end(seg); + goto sigbus; + } + LoadHWUE(addr, value, res); + if (res) { + force_uaccess_end(seg); + goto fault; + } + compute_return_epc(regs); + regs->regs[insn.spec3_format.rt] = value; + break; + case she_op: + if (!access_ok(addr, 2)) { + force_uaccess_end(seg); + goto sigbus; + } + compute_return_epc(regs); + value = regs->regs[insn.spec3_format.rt]; + StoreHWE(addr, value, res); + if (res) { + force_uaccess_end(seg); + goto fault; + } + break; + case swe_op: + if (!access_ok(addr, 4)) { + force_uaccess_end(seg); + goto sigbus; + } + compute_return_epc(regs); + value = regs->regs[insn.spec3_format.rt]; + StoreWE(addr, value, res); + if (res) { + force_uaccess_end(seg); + goto fault; + } + break; + default: + force_uaccess_end(seg); + goto sigill; + } + force_uaccess_end(seg); + } +#endif + break; + case lh_op: + if (!access_ok(addr, 2)) + goto sigbus; + + if (IS_ENABLED(CONFIG_EVA)) { + if (uaccess_kernel()) + LoadHW(addr, value, res); + else + LoadHWE(addr, value, res); + } else { + LoadHW(addr, value, res); + } + + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.i_format.rt] = value; + break; + + case lw_op: + if (!access_ok(addr, 4)) + goto sigbus; + + if (IS_ENABLED(CONFIG_EVA)) { + if (uaccess_kernel()) + LoadW(addr, value, res); + else + LoadWE(addr, value, res); + } else { + LoadW(addr, value, res); + } + + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.i_format.rt] = value; + break; + + case lhu_op: + if (!access_ok(addr, 2)) + goto sigbus; + + if (IS_ENABLED(CONFIG_EVA)) { + if (uaccess_kernel()) + LoadHWU(addr, value, res); + else + LoadHWUE(addr, value, res); + } else { + LoadHWU(addr, value, res); + } + + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.i_format.rt] = value; + break; + + case lwu_op: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 4)) + goto sigbus; + + LoadWU(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.i_format.rt] = value; + break; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + + case ld_op: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 8)) + goto sigbus; + + LoadDW(addr, value, res); + if (res) + goto fault; + compute_return_epc(regs); + regs->regs[insn.i_format.rt] = value; + break; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + + case sh_op: + if (!access_ok(addr, 2)) + goto sigbus; + + compute_return_epc(regs); + value = regs->regs[insn.i_format.rt]; + + if (IS_ENABLED(CONFIG_EVA)) { + if (uaccess_kernel()) + StoreHW(addr, value, res); + else + StoreHWE(addr, value, res); + } else { + StoreHW(addr, value, res); + } + + if (res) + goto fault; + break; + + case sw_op: + if (!access_ok(addr, 4)) + goto sigbus; + + compute_return_epc(regs); + value = regs->regs[insn.i_format.rt]; + + if (IS_ENABLED(CONFIG_EVA)) { + if (uaccess_kernel()) + StoreW(addr, value, res); + else + StoreWE(addr, value, res); + } else { + StoreW(addr, value, res); + } + + if (res) + goto fault; + break; + + case sd_op: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 8)) + goto sigbus; + + compute_return_epc(regs); + value = regs->regs[insn.i_format.rt]; + StoreDW(addr, value, res); + if (res) + goto fault; + break; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + +#ifdef CONFIG_MIPS_FP_SUPPORT + + case lwc1_op: + case ldc1_op: + case swc1_op: + case sdc1_op: + case cop1x_op: { + void __user *fault_addr = NULL; + + die_if_kernel("Unaligned FP access in kernel code", regs); + BUG_ON(!used_math()); + + res = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, + &fault_addr); + own_fpu(1); /* Restore FPU state. */ + + /* Signal if something went wrong. */ + process_fpemu_return(res, fault_addr, 0); + + if (res == 0) + break; + return; + } +#endif /* CONFIG_MIPS_FP_SUPPORT */ + +#ifdef CONFIG_CPU_HAS_MSA + + case msa_op: { + unsigned int wd, preempted; + enum msa_2b_fmt df; + union fpureg *fpr; + + if (!cpu_has_msa) + goto sigill; + + /* + * If we've reached this point then userland should have taken + * the MSA disabled exception & initialised vector context at + * some point in the past. + */ + BUG_ON(!thread_msa_context_live()); + + df = insn.msa_mi10_format.df; + wd = insn.msa_mi10_format.wd; + fpr = ¤t->thread.fpu.fpr[wd]; + + switch (insn.msa_mi10_format.func) { + case msa_ld_op: + if (!access_ok(addr, sizeof(*fpr))) + goto sigbus; + + do { + /* + * If we have live MSA context keep track of + * whether we get preempted in order to avoid + * the register context we load being clobbered + * by the live context as it's saved during + * preemption. If we don't have live context + * then it can't be saved to clobber the value + * we load. + */ + preempted = test_thread_flag(TIF_USEDMSA); + + res = __copy_from_user_inatomic(fpr, addr, + sizeof(*fpr)); + if (res) + goto fault; + + /* + * Update the hardware register if it is in use + * by the task in this quantum, in order to + * avoid having to save & restore the whole + * vector context. + */ + preempt_disable(); + if (test_thread_flag(TIF_USEDMSA)) { + write_msa_wr(wd, fpr, df); + preempted = 0; + } + preempt_enable(); + } while (preempted); + break; + + case msa_st_op: + if (!access_ok(addr, sizeof(*fpr))) + goto sigbus; + + /* + * Update from the hardware register if it is in use by + * the task in this quantum, in order to avoid having to + * save & restore the whole vector context. + */ + preempt_disable(); + if (test_thread_flag(TIF_USEDMSA)) + read_msa_wr(wd, fpr, df); + preempt_enable(); + + res = __copy_to_user_inatomic(addr, fpr, sizeof(*fpr)); + if (res) + goto fault; + break; + + default: + goto sigbus; + } + + compute_return_epc(regs); + break; + } +#endif /* CONFIG_CPU_HAS_MSA */ + +#ifndef CONFIG_CPU_MIPSR6 + /* + * COP2 is available to implementor for application specific use. + * It's up to applications to register a notifier chain and do + * whatever they have to do, including possible sending of signals. + * + * This instruction has been reallocated in Release 6 + */ + case lwc2_op: + cu2_notifier_call_chain(CU2_LWC2_OP, regs); + break; + + case ldc2_op: + cu2_notifier_call_chain(CU2_LDC2_OP, regs); + break; + + case swc2_op: + cu2_notifier_call_chain(CU2_SWC2_OP, regs); + break; + + case sdc2_op: + cu2_notifier_call_chain(CU2_SDC2_OP, regs); + break; +#endif + default: + /* + * Pheeee... We encountered an yet unknown instruction or + * cache coherence problem. Die sucker, die ... + */ + goto sigill; + } + +#ifdef CONFIG_DEBUG_FS + unaligned_instructions++; +#endif + + return; + +fault: + /* roll back jump/branch */ + regs->cp0_epc = origpc; + regs->regs[31] = orig31; + /* Did we have an exception handler installed? */ + if (fixup_exception(regs)) + return; + + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGSEGV); + + return; + +sigbus: + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGBUS); + + return; + +sigill: + die_if_kernel + ("Unhandled kernel unaligned access or invalid instruction", regs); + force_sig(SIGILL); +} + +/* Recode table from 16-bit register notation to 32-bit GPR. */ +const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 }; + +/* Recode table from 16-bit STORE register notation to 32-bit GPR. */ +static const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 }; + +static void emulate_load_store_microMIPS(struct pt_regs *regs, + void __user *addr) +{ + unsigned long value; + unsigned int res; + int i; + unsigned int reg = 0, rvar; + unsigned long orig31; + u16 __user *pc16; + u16 halfword; + unsigned int word; + unsigned long origpc, contpc; + union mips_instruction insn; + struct mm_decoded_insn mminsn; + + origpc = regs->cp0_epc; + orig31 = regs->regs[31]; + + mminsn.micro_mips_mode = 1; + + /* + * This load never faults. + */ + pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc); + __get_user(halfword, pc16); + pc16++; + contpc = regs->cp0_epc + 2; + word = ((unsigned int)halfword << 16); + mminsn.pc_inc = 2; + + if (!mm_insn_16bit(halfword)) { + __get_user(halfword, pc16); + pc16++; + contpc = regs->cp0_epc + 4; + mminsn.pc_inc = 4; + word |= halfword; + } + mminsn.insn = word; + + if (get_user(halfword, pc16)) + goto fault; + mminsn.next_pc_inc = 2; + word = ((unsigned int)halfword << 16); + + if (!mm_insn_16bit(halfword)) { + pc16++; + if (get_user(halfword, pc16)) + goto fault; + mminsn.next_pc_inc = 4; + word |= halfword; + } + mminsn.next_insn = word; + + insn = (union mips_instruction)(mminsn.insn); + if (mm_isBranchInstr(regs, mminsn, &contpc)) + insn = (union mips_instruction)(mminsn.next_insn); + + /* Parse instruction to find what to do */ + + switch (insn.mm_i_format.opcode) { + + case mm_pool32a_op: + switch (insn.mm_x_format.func) { + case mm_lwxs_op: + reg = insn.mm_x_format.rd; + goto loadW; + } + + goto sigbus; + + case mm_pool32b_op: + switch (insn.mm_m_format.func) { + case mm_lwp_func: + reg = insn.mm_m_format.rd; + if (reg == 31) + goto sigbus; + + if (!access_ok(addr, 8)) + goto sigbus; + + LoadW(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + addr += 4; + LoadW(addr, value, res); + if (res) + goto fault; + regs->regs[reg + 1] = value; + goto success; + + case mm_swp_func: + reg = insn.mm_m_format.rd; + if (reg == 31) + goto sigbus; + + if (!access_ok(addr, 8)) + goto sigbus; + + value = regs->regs[reg]; + StoreW(addr, value, res); + if (res) + goto fault; + addr += 4; + value = regs->regs[reg + 1]; + StoreW(addr, value, res); + if (res) + goto fault; + goto success; + + case mm_ldp_func: +#ifdef CONFIG_64BIT + reg = insn.mm_m_format.rd; + if (reg == 31) + goto sigbus; + + if (!access_ok(addr, 16)) + goto sigbus; + + LoadDW(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + addr += 8; + LoadDW(addr, value, res); + if (res) + goto fault; + regs->regs[reg + 1] = value; + goto success; +#endif /* CONFIG_64BIT */ + + goto sigill; + + case mm_sdp_func: +#ifdef CONFIG_64BIT + reg = insn.mm_m_format.rd; + if (reg == 31) + goto sigbus; + + if (!access_ok(addr, 16)) + goto sigbus; + + value = regs->regs[reg]; + StoreDW(addr, value, res); + if (res) + goto fault; + addr += 8; + value = regs->regs[reg + 1]; + StoreDW(addr, value, res); + if (res) + goto fault; + goto success; +#endif /* CONFIG_64BIT */ + + goto sigill; + + case mm_lwm32_func: + reg = insn.mm_m_format.rd; + rvar = reg & 0xf; + if ((rvar > 9) || !reg) + goto sigill; + if (reg & 0x10) { + if (!access_ok(addr, 4 * (rvar + 1))) + goto sigbus; + } else { + if (!access_ok(addr, 4 * rvar)) + goto sigbus; + } + if (rvar == 9) + rvar = 8; + for (i = 16; rvar; rvar--, i++) { + LoadW(addr, value, res); + if (res) + goto fault; + addr += 4; + regs->regs[i] = value; + } + if ((reg & 0xf) == 9) { + LoadW(addr, value, res); + if (res) + goto fault; + addr += 4; + regs->regs[30] = value; + } + if (reg & 0x10) { + LoadW(addr, value, res); + if (res) + goto fault; + regs->regs[31] = value; + } + goto success; + + case mm_swm32_func: + reg = insn.mm_m_format.rd; + rvar = reg & 0xf; + if ((rvar > 9) || !reg) + goto sigill; + if (reg & 0x10) { + if (!access_ok(addr, 4 * (rvar + 1))) + goto sigbus; + } else { + if (!access_ok(addr, 4 * rvar)) + goto sigbus; + } + if (rvar == 9) + rvar = 8; + for (i = 16; rvar; rvar--, i++) { + value = regs->regs[i]; + StoreW(addr, value, res); + if (res) + goto fault; + addr += 4; + } + if ((reg & 0xf) == 9) { + value = regs->regs[30]; + StoreW(addr, value, res); + if (res) + goto fault; + addr += 4; + } + if (reg & 0x10) { + value = regs->regs[31]; + StoreW(addr, value, res); + if (res) + goto fault; + } + goto success; + + case mm_ldm_func: +#ifdef CONFIG_64BIT + reg = insn.mm_m_format.rd; + rvar = reg & 0xf; + if ((rvar > 9) || !reg) + goto sigill; + if (reg & 0x10) { + if (!access_ok(addr, 8 * (rvar + 1))) + goto sigbus; + } else { + if (!access_ok(addr, 8 * rvar)) + goto sigbus; + } + if (rvar == 9) + rvar = 8; + + for (i = 16; rvar; rvar--, i++) { + LoadDW(addr, value, res); + if (res) + goto fault; + addr += 4; + regs->regs[i] = value; + } + if ((reg & 0xf) == 9) { + LoadDW(addr, value, res); + if (res) + goto fault; + addr += 8; + regs->regs[30] = value; + } + if (reg & 0x10) { + LoadDW(addr, value, res); + if (res) + goto fault; + regs->regs[31] = value; + } + goto success; +#endif /* CONFIG_64BIT */ + + goto sigill; + + case mm_sdm_func: +#ifdef CONFIG_64BIT + reg = insn.mm_m_format.rd; + rvar = reg & 0xf; + if ((rvar > 9) || !reg) + goto sigill; + if (reg & 0x10) { + if (!access_ok(addr, 8 * (rvar + 1))) + goto sigbus; + } else { + if (!access_ok(addr, 8 * rvar)) + goto sigbus; + } + if (rvar == 9) + rvar = 8; + + for (i = 16; rvar; rvar--, i++) { + value = regs->regs[i]; + StoreDW(addr, value, res); + if (res) + goto fault; + addr += 8; + } + if ((reg & 0xf) == 9) { + value = regs->regs[30]; + StoreDW(addr, value, res); + if (res) + goto fault; + addr += 8; + } + if (reg & 0x10) { + value = regs->regs[31]; + StoreDW(addr, value, res); + if (res) + goto fault; + } + goto success; +#endif /* CONFIG_64BIT */ + + goto sigill; + + /* LWC2, SWC2, LDC2, SDC2 are not serviced */ + } + + goto sigbus; + + case mm_pool32c_op: + switch (insn.mm_m_format.func) { + case mm_lwu_func: + reg = insn.mm_m_format.rd; + goto loadWU; + } + + /* LL,SC,LLD,SCD are not serviced */ + goto sigbus; + +#ifdef CONFIG_MIPS_FP_SUPPORT + case mm_pool32f_op: + switch (insn.mm_x_format.func) { + case mm_lwxc1_func: + case mm_swxc1_func: + case mm_ldxc1_func: + case mm_sdxc1_func: + goto fpu_emul; + } + + goto sigbus; + + case mm_ldc132_op: + case mm_sdc132_op: + case mm_lwc132_op: + case mm_swc132_op: { + void __user *fault_addr = NULL; + +fpu_emul: + /* roll back jump/branch */ + regs->cp0_epc = origpc; + regs->regs[31] = orig31; + + die_if_kernel("Unaligned FP access in kernel code", regs); + BUG_ON(!used_math()); + BUG_ON(!is_fpu_owner()); + + res = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, + &fault_addr); + own_fpu(1); /* restore FPU state */ + + /* If something went wrong, signal */ + process_fpemu_return(res, fault_addr, 0); + + if (res == 0) + goto success; + return; + } +#endif /* CONFIG_MIPS_FP_SUPPORT */ + + case mm_lh32_op: + reg = insn.mm_i_format.rt; + goto loadHW; + + case mm_lhu32_op: + reg = insn.mm_i_format.rt; + goto loadHWU; + + case mm_lw32_op: + reg = insn.mm_i_format.rt; + goto loadW; + + case mm_sh32_op: + reg = insn.mm_i_format.rt; + goto storeHW; + + case mm_sw32_op: + reg = insn.mm_i_format.rt; + goto storeW; + + case mm_ld32_op: + reg = insn.mm_i_format.rt; + goto loadDW; + + case mm_sd32_op: + reg = insn.mm_i_format.rt; + goto storeDW; + + case mm_pool16c_op: + switch (insn.mm16_m_format.func) { + case mm_lwm16_op: + reg = insn.mm16_m_format.rlist; + rvar = reg + 1; + if (!access_ok(addr, 4 * rvar)) + goto sigbus; + + for (i = 16; rvar; rvar--, i++) { + LoadW(addr, value, res); + if (res) + goto fault; + addr += 4; + regs->regs[i] = value; + } + LoadW(addr, value, res); + if (res) + goto fault; + regs->regs[31] = value; + + goto success; + + case mm_swm16_op: + reg = insn.mm16_m_format.rlist; + rvar = reg + 1; + if (!access_ok(addr, 4 * rvar)) + goto sigbus; + + for (i = 16; rvar; rvar--, i++) { + value = regs->regs[i]; + StoreW(addr, value, res); + if (res) + goto fault; + addr += 4; + } + value = regs->regs[31]; + StoreW(addr, value, res); + if (res) + goto fault; + + goto success; + + } + + goto sigbus; + + case mm_lhu16_op: + reg = reg16to32[insn.mm16_rb_format.rt]; + goto loadHWU; + + case mm_lw16_op: + reg = reg16to32[insn.mm16_rb_format.rt]; + goto loadW; + + case mm_sh16_op: + reg = reg16to32st[insn.mm16_rb_format.rt]; + goto storeHW; + + case mm_sw16_op: + reg = reg16to32st[insn.mm16_rb_format.rt]; + goto storeW; + + case mm_lwsp16_op: + reg = insn.mm16_r5_format.rt; + goto loadW; + + case mm_swsp16_op: + reg = insn.mm16_r5_format.rt; + goto storeW; + + case mm_lwgp16_op: + reg = reg16to32[insn.mm16_r3_format.rt]; + goto loadW; + + default: + goto sigill; + } + +loadHW: + if (!access_ok(addr, 2)) + goto sigbus; + + LoadHW(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + goto success; + +loadHWU: + if (!access_ok(addr, 2)) + goto sigbus; + + LoadHWU(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + goto success; + +loadW: + if (!access_ok(addr, 4)) + goto sigbus; + + LoadW(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + goto success; + +loadWU: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 4)) + goto sigbus; + + LoadWU(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + goto success; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + +loadDW: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 8)) + goto sigbus; + + LoadDW(addr, value, res); + if (res) + goto fault; + regs->regs[reg] = value; + goto success; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + +storeHW: + if (!access_ok(addr, 2)) + goto sigbus; + + value = regs->regs[reg]; + StoreHW(addr, value, res); + if (res) + goto fault; + goto success; + +storeW: + if (!access_ok(addr, 4)) + goto sigbus; + + value = regs->regs[reg]; + StoreW(addr, value, res); + if (res) + goto fault; + goto success; + +storeDW: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 8)) + goto sigbus; + + value = regs->regs[reg]; + StoreDW(addr, value, res); + if (res) + goto fault; + goto success; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + +success: + regs->cp0_epc = contpc; /* advance or branch */ + +#ifdef CONFIG_DEBUG_FS + unaligned_instructions++; +#endif + return; + +fault: + /* roll back jump/branch */ + regs->cp0_epc = origpc; + regs->regs[31] = orig31; + /* Did we have an exception handler installed? */ + if (fixup_exception(regs)) + return; + + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGSEGV); + + return; + +sigbus: + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGBUS); + + return; + +sigill: + die_if_kernel + ("Unhandled kernel unaligned access or invalid instruction", regs); + force_sig(SIGILL); +} + +static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr) +{ + unsigned long value; + unsigned int res; + int reg; + unsigned long orig31; + u16 __user *pc16; + unsigned long origpc; + union mips16e_instruction mips16inst, oldinst; + unsigned int opcode; + int extended = 0; + + origpc = regs->cp0_epc; + orig31 = regs->regs[31]; + pc16 = (unsigned short __user *)msk_isa16_mode(origpc); + /* + * This load never faults. + */ + __get_user(mips16inst.full, pc16); + oldinst = mips16inst; + + /* skip EXTEND instruction */ + if (mips16inst.ri.opcode == MIPS16e_extend_op) { + extended = 1; + pc16++; + __get_user(mips16inst.full, pc16); + } else if (delay_slot(regs)) { + /* skip jump instructions */ + /* JAL/JALX are 32 bits but have OPCODE in first short int */ + if (mips16inst.ri.opcode == MIPS16e_jal_op) + pc16++; + pc16++; + if (get_user(mips16inst.full, pc16)) + goto sigbus; + } + + opcode = mips16inst.ri.opcode; + switch (opcode) { + case MIPS16e_i64_op: /* I64 or RI64 instruction */ + switch (mips16inst.i64.func) { /* I64/RI64 func field check */ + case MIPS16e_ldpc_func: + case MIPS16e_ldsp_func: + reg = reg16to32[mips16inst.ri64.ry]; + goto loadDW; + + case MIPS16e_sdsp_func: + reg = reg16to32[mips16inst.ri64.ry]; + goto writeDW; + + case MIPS16e_sdrasp_func: + reg = 29; /* GPRSP */ + goto writeDW; + } + + goto sigbus; + + case MIPS16e_swsp_op: + reg = reg16to32[mips16inst.ri.rx]; + if (extended && cpu_has_mips16e2) + switch (mips16inst.ri.imm >> 5) { + case 0: /* SWSP */ + case 1: /* SWGP */ + break; + case 2: /* SHGP */ + opcode = MIPS16e_sh_op; + break; + default: + goto sigbus; + } + break; + + case MIPS16e_lwpc_op: + reg = reg16to32[mips16inst.ri.rx]; + break; + + case MIPS16e_lwsp_op: + reg = reg16to32[mips16inst.ri.rx]; + if (extended && cpu_has_mips16e2) + switch (mips16inst.ri.imm >> 5) { + case 0: /* LWSP */ + case 1: /* LWGP */ + break; + case 2: /* LHGP */ + opcode = MIPS16e_lh_op; + break; + case 4: /* LHUGP */ + opcode = MIPS16e_lhu_op; + break; + default: + goto sigbus; + } + break; + + case MIPS16e_i8_op: + if (mips16inst.i8.func != MIPS16e_swrasp_func) + goto sigbus; + reg = 29; /* GPRSP */ + break; + + default: + reg = reg16to32[mips16inst.rri.ry]; + break; + } + + switch (opcode) { + + case MIPS16e_lb_op: + case MIPS16e_lbu_op: + case MIPS16e_sb_op: + goto sigbus; + + case MIPS16e_lh_op: + if (!access_ok(addr, 2)) + goto sigbus; + + LoadHW(addr, value, res); + if (res) + goto fault; + MIPS16e_compute_return_epc(regs, &oldinst); + regs->regs[reg] = value; + break; + + case MIPS16e_lhu_op: + if (!access_ok(addr, 2)) + goto sigbus; + + LoadHWU(addr, value, res); + if (res) + goto fault; + MIPS16e_compute_return_epc(regs, &oldinst); + regs->regs[reg] = value; + break; + + case MIPS16e_lw_op: + case MIPS16e_lwpc_op: + case MIPS16e_lwsp_op: + if (!access_ok(addr, 4)) + goto sigbus; + + LoadW(addr, value, res); + if (res) + goto fault; + MIPS16e_compute_return_epc(regs, &oldinst); + regs->regs[reg] = value; + break; + + case MIPS16e_lwu_op: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 4)) + goto sigbus; + + LoadWU(addr, value, res); + if (res) + goto fault; + MIPS16e_compute_return_epc(regs, &oldinst); + regs->regs[reg] = value; + break; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + + case MIPS16e_ld_op: +loadDW: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 8)) + goto sigbus; + + LoadDW(addr, value, res); + if (res) + goto fault; + MIPS16e_compute_return_epc(regs, &oldinst); + regs->regs[reg] = value; + break; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + + case MIPS16e_sh_op: + if (!access_ok(addr, 2)) + goto sigbus; + + MIPS16e_compute_return_epc(regs, &oldinst); + value = regs->regs[reg]; + StoreHW(addr, value, res); + if (res) + goto fault; + break; + + case MIPS16e_sw_op: + case MIPS16e_swsp_op: + case MIPS16e_i8_op: /* actually - MIPS16e_swrasp_func */ + if (!access_ok(addr, 4)) + goto sigbus; + + MIPS16e_compute_return_epc(regs, &oldinst); + value = regs->regs[reg]; + StoreW(addr, value, res); + if (res) + goto fault; + break; + + case MIPS16e_sd_op: +writeDW: +#ifdef CONFIG_64BIT + /* + * A 32-bit kernel might be running on a 64-bit processor. But + * if we're on a 32-bit processor and an i-cache incoherency + * or race makes us see a 64-bit instruction here the sdl/sdr + * would blow up, so for now we don't handle unaligned 64-bit + * instructions on 32-bit kernels. + */ + if (!access_ok(addr, 8)) + goto sigbus; + + MIPS16e_compute_return_epc(regs, &oldinst); + value = regs->regs[reg]; + StoreDW(addr, value, res); + if (res) + goto fault; + break; +#endif /* CONFIG_64BIT */ + + /* Cannot handle 64-bit instructions in 32-bit kernel */ + goto sigill; + + default: + /* + * Pheeee... We encountered an yet unknown instruction or + * cache coherence problem. Die sucker, die ... + */ + goto sigill; + } + +#ifdef CONFIG_DEBUG_FS + unaligned_instructions++; +#endif + + return; + +fault: + /* roll back jump/branch */ + regs->cp0_epc = origpc; + regs->regs[31] = orig31; + /* Did we have an exception handler installed? */ + if (fixup_exception(regs)) + return; + + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGSEGV); + + return; + +sigbus: + die_if_kernel("Unhandled kernel unaligned access", regs); + force_sig(SIGBUS); + + return; + +sigill: + die_if_kernel + ("Unhandled kernel unaligned access or invalid instruction", regs); + force_sig(SIGILL); +} + +asmlinkage void do_ade(struct pt_regs *regs) +{ + enum ctx_state prev_state; + unsigned int __user *pc; + mm_segment_t seg; + + prev_state = exception_enter(); + perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, + 1, regs, regs->cp0_badvaddr); + /* + * Did we catch a fault trying to load an instruction? + */ + if (regs->cp0_badvaddr == regs->cp0_epc) + goto sigbus; + + if (user_mode(regs) && !test_thread_flag(TIF_FIXADE)) + goto sigbus; + if (unaligned_action == UNALIGNED_ACTION_SIGNAL) + goto sigbus; + + /* + * Do branch emulation only if we didn't forward the exception. + * This is all so but ugly ... + */ + + /* + * Are we running in microMIPS mode? + */ + if (get_isa16_mode(regs->cp0_epc)) { + /* + * Did we catch a fault trying to load an instruction in + * 16-bit mode? + */ + if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc)) + goto sigbus; + if (unaligned_action == UNALIGNED_ACTION_SHOW) + show_registers(regs); + + if (cpu_has_mmips) { + seg = get_fs(); + if (!user_mode(regs)) + set_fs(KERNEL_DS); + emulate_load_store_microMIPS(regs, + (void __user *)regs->cp0_badvaddr); + set_fs(seg); + + return; + } + + if (cpu_has_mips16) { + seg = get_fs(); + if (!user_mode(regs)) + set_fs(KERNEL_DS); + emulate_load_store_MIPS16e(regs, + (void __user *)regs->cp0_badvaddr); + set_fs(seg); + + return; + } + + goto sigbus; + } + + if (unaligned_action == UNALIGNED_ACTION_SHOW) + show_registers(regs); + pc = (unsigned int __user *)exception_epc(regs); + + seg = get_fs(); + if (!user_mode(regs)) + set_fs(KERNEL_DS); + emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc); + set_fs(seg); + + return; + +sigbus: + die_if_kernel("Kernel unaligned instruction access", regs); + force_sig(SIGBUS); + + /* + * XXX On return from the signal handler we should advance the epc + */ + exception_exit(prev_state); +} + +#ifdef CONFIG_DEBUG_FS +static int __init debugfs_unaligned(void) +{ + debugfs_create_u32("unaligned_instructions", S_IRUGO, mips_debugfs_dir, + &unaligned_instructions); + debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, + mips_debugfs_dir, &unaligned_action); + return 0; +} +arch_initcall(debugfs_unaligned); +#endif diff --git a/arch/mips/kernel/uprobes.c b/arch/mips/kernel/uprobes.c new file mode 100644 index 000000000..6dbe4eab0 --- /dev/null +++ b/arch/mips/kernel/uprobes.c @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/highmem.h> +#include <linux/kdebug.h> +#include <linux/types.h> +#include <linux/notifier.h> +#include <linux/sched.h> +#include <linux/uprobes.h> + +#include <asm/branch.h> +#include <asm/cpu-features.h> +#include <asm/ptrace.h> + +#include "probes-common.h" + +static inline int insn_has_delay_slot(const union mips_instruction insn) +{ + return __insn_has_delay_slot(insn); +} + +/** + * arch_uprobe_analyze_insn - instruction analysis including validity and fixups. + * @mm: the probed address space. + * @arch_uprobe: the probepoint information. + * @addr: virtual address at which to install the probepoint + * Return 0 on success or a -ve number on error. + */ +int arch_uprobe_analyze_insn(struct arch_uprobe *aup, + struct mm_struct *mm, unsigned long addr) +{ + union mips_instruction inst; + + /* + * For the time being this also blocks attempts to use uprobes with + * MIPS16 and microMIPS. + */ + if (addr & 0x03) + return -EINVAL; + + inst.word = aup->insn[0]; + + if (__insn_is_compact_branch(inst)) { + pr_notice("Uprobes for compact branches are not supported\n"); + return -EINVAL; + } + + aup->ixol[0] = aup->insn[insn_has_delay_slot(inst)]; + aup->ixol[1] = UPROBE_BRK_UPROBE_XOL; /* NOP */ + + return 0; +} + +/** + * is_trap_insn - check if the instruction is a trap variant + * @insn: instruction to be checked. + * Returns true if @insn is a trap variant. + * + * This definition overrides the weak definition in kernel/events/uprobes.c. + * and is needed for the case where an architecture has multiple trap + * instructions (like PowerPC or MIPS). We treat BREAK just like the more + * modern conditional trap instructions. + */ +bool is_trap_insn(uprobe_opcode_t *insn) +{ + union mips_instruction inst; + + inst.word = *insn; + + switch (inst.i_format.opcode) { + case spec_op: + switch (inst.r_format.func) { + case break_op: + case teq_op: + case tge_op: + case tgeu_op: + case tlt_op: + case tltu_op: + case tne_op: + return 1; + } + break; + + case bcond_op: /* Yes, really ... */ + switch (inst.u_format.rt) { + case teqi_op: + case tgei_op: + case tgeiu_op: + case tlti_op: + case tltiu_op: + case tnei_op: + return 1; + } + break; + } + + return 0; +} + +#define UPROBE_TRAP_NR ULONG_MAX + +/* + * arch_uprobe_pre_xol - prepare to execute out of line. + * @auprobe: the probepoint information. + * @regs: reflects the saved user state of current task. + */ +int arch_uprobe_pre_xol(struct arch_uprobe *aup, struct pt_regs *regs) +{ + struct uprobe_task *utask = current->utask; + + /* + * Now find the EPC where to resume after the breakpoint has been + * dealt with. This may require emulation of a branch. + */ + aup->resume_epc = regs->cp0_epc + 4; + if (insn_has_delay_slot((union mips_instruction) aup->insn[0])) { + __compute_return_epc_for_insn(regs, + (union mips_instruction) aup->insn[0]); + aup->resume_epc = regs->cp0_epc; + } + utask->autask.saved_trap_nr = current->thread.trap_nr; + current->thread.trap_nr = UPROBE_TRAP_NR; + regs->cp0_epc = current->utask->xol_vaddr; + + return 0; +} + +int arch_uprobe_post_xol(struct arch_uprobe *aup, struct pt_regs *regs) +{ + struct uprobe_task *utask = current->utask; + + current->thread.trap_nr = utask->autask.saved_trap_nr; + regs->cp0_epc = aup->resume_epc; + + return 0; +} + +/* + * If xol insn itself traps and generates a signal(Say, + * SIGILL/SIGSEGV/etc), then detect the case where a singlestepped + * instruction jumps back to its own address. It is assumed that anything + * like do_page_fault/do_trap/etc sets thread.trap_nr != -1. + * + * arch_uprobe_pre_xol/arch_uprobe_post_xol save/restore thread.trap_nr, + * arch_uprobe_xol_was_trapped() simply checks that ->trap_nr is not equal to + * UPROBE_TRAP_NR == -1 set by arch_uprobe_pre_xol(). + */ +bool arch_uprobe_xol_was_trapped(struct task_struct *tsk) +{ + if (tsk->thread.trap_nr != UPROBE_TRAP_NR) + return true; + + return false; +} + +int arch_uprobe_exception_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = data; + struct pt_regs *regs = args->regs; + + /* regs == NULL is a kernel bug */ + if (WARN_ON(!regs)) + return NOTIFY_DONE; + + /* We are only interested in userspace traps */ + if (!user_mode(regs)) + return NOTIFY_DONE; + + switch (val) { + case DIE_UPROBE: + if (uprobe_pre_sstep_notifier(regs)) + return NOTIFY_STOP; + break; + case DIE_UPROBE_XOL: + if (uprobe_post_sstep_notifier(regs)) + return NOTIFY_STOP; + default: + break; + } + + return 0; +} + +/* + * This function gets called when XOL instruction either gets trapped or + * the thread has a fatal signal. Reset the instruction pointer to its + * probed address for the potential restart or for post mortem analysis. + */ +void arch_uprobe_abort_xol(struct arch_uprobe *aup, + struct pt_regs *regs) +{ + struct uprobe_task *utask = current->utask; + + instruction_pointer_set(regs, utask->vaddr); +} + +unsigned long arch_uretprobe_hijack_return_addr( + unsigned long trampoline_vaddr, struct pt_regs *regs) +{ + unsigned long ra; + + ra = regs->regs[31]; + + /* Replace the return address with the trampoline address */ + regs->regs[31] = trampoline_vaddr; + + return ra; +} + +/** + * set_swbp - store breakpoint at a given address. + * @auprobe: arch specific probepoint information. + * @mm: the probed process address space. + * @vaddr: the virtual address to insert the opcode. + * + * For mm @mm, store the breakpoint instruction at @vaddr. + * Return 0 (success) or a negative errno. + * + * This version overrides the weak version in kernel/events/uprobes.c. + * It is required to handle MIPS16 and microMIPS. + */ +int __weak set_swbp(struct arch_uprobe *auprobe, struct mm_struct *mm, + unsigned long vaddr) +{ + return uprobe_write_opcode(auprobe, mm, vaddr, UPROBE_SWBP_INSN); +} + +void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr, + void *src, unsigned long len) +{ + unsigned long kaddr, kstart; + + /* Initialize the slot */ + kaddr = (unsigned long)kmap_atomic(page); + kstart = kaddr + (vaddr & ~PAGE_MASK); + memcpy((void *)kstart, src, len); + flush_icache_range(kstart, kstart + len); + kunmap_atomic((void *)kaddr); +} + +/** + * uprobe_get_swbp_addr - compute address of swbp given post-swbp regs + * @regs: Reflects the saved state of the task after it has hit a breakpoint + * instruction. + * Return the address of the breakpoint instruction. + * + * This overrides the weak version in kernel/events/uprobes.c. + */ +unsigned long uprobe_get_swbp_addr(struct pt_regs *regs) +{ + return instruction_pointer(regs); +} + +/* + * See if the instruction can be emulated. + * Returns true if instruction was emulated, false otherwise. + * + * For now we always emulate so this function just returns 0. + */ +bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) +{ + return 0; +} diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c new file mode 100644 index 000000000..242dc5e83 --- /dev/null +++ b/arch/mips/kernel/vdso.c @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Alex Smith <alex.smith@imgtec.com> + */ + +#include <linux/binfmts.h> +#include <linux/elf.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/random.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/timekeeper_internal.h> + +#include <asm/abi.h> +#include <asm/mips-cps.h> +#include <asm/page.h> +#include <asm/vdso.h> +#include <vdso/helpers.h> +#include <vdso/vsyscall.h> + +/* Kernel-provided data used by the VDSO. */ +static union mips_vdso_data mips_vdso_data __page_aligned_data; +struct vdso_data *vdso_data = mips_vdso_data.data; + +/* + * Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as + * what we map and where within the area they are mapped is determined at + * runtime. + */ +static struct page *no_pages[] = { NULL }; +static struct vm_special_mapping vdso_vvar_mapping = { + .name = "[vvar]", + .pages = no_pages, +}; + +static void __init init_vdso_image(struct mips_vdso_image *image) +{ + unsigned long num_pages, i; + unsigned long data_pfn; + + BUG_ON(!PAGE_ALIGNED(image->data)); + BUG_ON(!PAGE_ALIGNED(image->size)); + + num_pages = image->size / PAGE_SIZE; + + data_pfn = __phys_to_pfn(__pa_symbol(image->data)); + for (i = 0; i < num_pages; i++) + image->mapping.pages[i] = pfn_to_page(data_pfn + i); +} + +static int __init init_vdso(void) +{ + init_vdso_image(&vdso_image); + +#ifdef CONFIG_MIPS32_O32 + init_vdso_image(&vdso_image_o32); +#endif + +#ifdef CONFIG_MIPS32_N32 + init_vdso_image(&vdso_image_n32); +#endif + + return 0; +} +subsys_initcall(init_vdso); + +static unsigned long vdso_base(void) +{ + unsigned long base = STACK_TOP; + + if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) { + /* Skip the delay slot emulation page */ + base += PAGE_SIZE; + } + + if (current->flags & PF_RANDOMIZE) { + base += get_random_int() & (VDSO_RANDOMIZE_SIZE - 1); + base = PAGE_ALIGN(base); + } + + return base; +} + +int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) +{ + struct mips_vdso_image *image = current->thread.abi->vdso; + struct mm_struct *mm = current->mm; + unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr, gic_pfn; + struct vm_area_struct *vma; + int ret; + + if (mmap_write_lock_killable(mm)) + return -EINTR; + + if (IS_ENABLED(CONFIG_MIPS_FP_SUPPORT)) { + /* Map delay slot emulation page */ + base = mmap_region(NULL, STACK_TOP, PAGE_SIZE, + VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + 0, NULL); + if (IS_ERR_VALUE(base)) { + ret = base; + goto out; + } + } + + /* + * Determine total area size. This includes the VDSO data itself, the + * data page, and the GIC user page if present. Always create a mapping + * for the GIC user area if the GIC is present regardless of whether it + * is the current clocksource, in case it comes into use later on. We + * only map a page even though the total area is 64K, as we only need + * the counter registers at the start. + */ + gic_size = mips_gic_present() ? PAGE_SIZE : 0; + vvar_size = gic_size + PAGE_SIZE; + size = vvar_size + image->size; + + /* + * Find a region that's large enough for us to perform the + * colour-matching alignment below. + */ + if (cpu_has_dc_aliases) + size += shm_align_mask + 1; + + base = get_unmapped_area(NULL, vdso_base(), size, 0, 0); + if (IS_ERR_VALUE(base)) { + ret = base; + goto out; + } + + /* + * If we suffer from dcache aliasing, ensure that the VDSO data page + * mapping is coloured the same as the kernel's mapping of that memory. + * This ensures that when the kernel updates the VDSO data userland + * will observe it without requiring cache invalidations. + */ + if (cpu_has_dc_aliases) { + base = __ALIGN_MASK(base, shm_align_mask); + base += ((unsigned long)vdso_data - gic_size) & shm_align_mask; + } + + data_addr = base + gic_size; + vdso_addr = data_addr + PAGE_SIZE; + + vma = _install_special_mapping(mm, base, vvar_size, + VM_READ | VM_MAYREAD, + &vdso_vvar_mapping); + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); + goto out; + } + + /* Map GIC user page. */ + if (gic_size) { + gic_pfn = virt_to_phys(mips_gic_base + MIPS_GIC_USER_OFS) >> PAGE_SHIFT; + + ret = io_remap_pfn_range(vma, base, gic_pfn, gic_size, + pgprot_noncached(PAGE_READONLY)); + if (ret) + goto out; + } + + /* Map data page. */ + ret = remap_pfn_range(vma, data_addr, + virt_to_phys(vdso_data) >> PAGE_SHIFT, + PAGE_SIZE, PAGE_READONLY); + if (ret) + goto out; + + /* Map VDSO image. */ + vma = _install_special_mapping(mm, vdso_addr, image->size, + VM_READ | VM_EXEC | + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &image->mapping); + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); + goto out; + } + + mm->context.vdso = (void *)vdso_addr; + ret = 0; + +out: + mmap_write_unlock(mm); + return ret; +} diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S new file mode 100644 index 000000000..64afe075d --- /dev/null +++ b/arch/mips/kernel/vmlinux.lds.S @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> + +#define PAGE_SIZE _PAGE_SIZE + +/* + * Put .bss..swapper_pg_dir as the first thing in .bss. This will + * ensure that it has .bss alignment (64K). + */ +#define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir) + +/* Cavium Octeon should not have a separate PT_NOTE Program Header. */ +#ifndef CONFIG_CAVIUM_OCTEON_SOC +#define EMITS_PT_NOTE +#endif + +#define RUNTIME_DISCARD_EXIT + +#include <asm-generic/vmlinux.lds.h> + +#undef mips +#define mips mips +OUTPUT_ARCH(mips) +ENTRY(kernel_entry) +PHDRS { + text PT_LOAD FLAGS(7); /* RWX */ +#ifndef CONFIG_CAVIUM_OCTEON_SOC + note PT_NOTE FLAGS(4); /* R__ */ +#endif /* CAVIUM_OCTEON_SOC */ +} + +#ifdef CONFIG_32BIT + #ifdef CONFIG_CPU_LITTLE_ENDIAN + jiffies = jiffies_64; + #else + jiffies = jiffies_64 + 4; + #endif +#else + jiffies = jiffies_64; +#endif + +SECTIONS +{ +#ifdef CONFIG_BOOT_ELF64 + /* Read-only sections, merged into text segment: */ + /* . = 0xc000000000000000; */ + + /* This is the value for an Origin kernel, taken from an IRIX kernel. */ + /* . = 0xc00000000001c000; */ + + /* Set the vaddr for the text segment to a value + * >= 0xa800 0000 0001 9000 if no symmon is going to configured + * >= 0xa800 0000 0030 0000 otherwise + */ + + /* . = 0xa800000000300000; */ + . = 0xffffffff80300000; +#endif + . = LINKER_LOAD_ADDRESS; + /* read-only */ + _text = .; /* Text and read-only data */ + .text : { + TEXT_TEXT + SCHED_TEXT + CPUIDLE_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + SOFTIRQENTRY_TEXT + *(.text.*) + *(.fixup) + *(.gnu.warning) + } :text = 0 + _etext = .; /* End of text section */ + + EXCEPTION_TABLE(16) + + /* Exception table for data bus errors */ + __dbe_table : { + __start___dbe_table = .; + KEEP(*(__dbe_table)) + __stop___dbe_table = .; + } + + _sdata = .; /* Start of data section */ + RO_DATA(4096) + + /* writeable */ + .data : { /* Data */ + . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ + + INIT_TASK_DATA(THREAD_SIZE) + NOSAVE_DATA + PAGE_ALIGNED_DATA(PAGE_SIZE) + CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + DATA_DATA + CONSTRUCTORS + } + BUG_TABLE + _gp = . + 0x8000; + .lit8 : { + *(.lit8) + } + .lit4 : { + *(.lit4) + } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { + *(.sdata) + } + _edata = .; /* End of data section */ + + /* will be freed after init */ + . = ALIGN(PAGE_SIZE); /* Init code and data */ + __init_begin = .; + INIT_TEXT_SECTION(PAGE_SIZE) + INIT_DATA_SECTION(16) + + . = ALIGN(4); + .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) { + __mips_machines_start = .; + KEEP(*(.mips.machines.init)) + __mips_machines_end = .; + } + + /* .exit.text is discarded at runtime, not link time, to deal with + * references from .rodata + */ + .exit.text : { + EXIT_TEXT + } + .exit.data : { + EXIT_DATA + } +#ifdef CONFIG_SMP + PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT) +#endif + +#ifdef CONFIG_MIPS_ELF_APPENDED_DTB + .appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) { + *(.appended_dtb) + KEEP(*(.appended_dtb)) + } +#endif + +#ifdef CONFIG_RELOCATABLE + . = ALIGN(4); + + .data.reloc : { + _relocation_start = .; + /* + * Space for relocation table + * This needs to be filled so that the + * relocs tool can overwrite the content. + * An invalid value is left at the start of the + * section to abort relocation if the table + * has not been filled in. + */ + LONG(0xFFFFFFFF); + FILL(0); + . += CONFIG_RELOCATION_TABLE_SIZE - 4; + _relocation_end = .; + } +#endif + +#ifdef CONFIG_MIPS_RAW_APPENDED_DTB + __appended_dtb = .; + /* leave space for appended DTB */ + . += 0x100000; +#endif + /* + * Align to 64K in attempt to eliminate holes before the + * .bss..swapper_pg_dir section at the start of .bss. This + * also satisfies PAGE_SIZE alignment as the largest page size + * allowed is 64K. + */ + . = ALIGN(0x10000); + __init_end = .; + /* freed after init ends here */ + + /* + * Force .bss to 64K alignment so that .bss..swapper_pg_dir + * gets that alignment. .sbss should be empty, so there will be + * no holes after __init_end. */ + BSS_SECTION(0, 0x10000, 8) + + _end = . ; + + /* These mark the ABI of the kernel for debuggers. */ + .mdebug.abi32 : { + KEEP(*(.mdebug.abi32)) + } + .mdebug.abi64 : { + KEEP(*(.mdebug.abi64)) + } + + /* This is the MIPS specific mdebug section. */ + .mdebug : { + *(.mdebug) + } + + STABS_DEBUG + DWARF_DEBUG + ELF_DETAILS + + /* These must appear regardless of . */ + .gptab.sdata : { + *(.gptab.data) + *(.gptab.sdata) + } + .gptab.sbss : { + *(.gptab.bss) + *(.gptab.sbss) + } + + /* Sections to be discarded */ + DISCARDS + /DISCARD/ : { + /* ABI crap starts here */ + *(.MIPS.abiflags) + *(.MIPS.options) + *(.options) + *(.pdr) + *(.reginfo) + } +} diff --git a/arch/mips/kernel/vpe-cmp.c b/arch/mips/kernel/vpe-cmp.c new file mode 100644 index 000000000..903c07bdc --- /dev/null +++ b/arch/mips/kernel/vpe-cmp.c @@ -0,0 +1,180 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include <asm/vpe.h> + +static int major; + +void cleanup_tc(struct tc *tc) +{ + +} + +static ssize_t store_kill(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + struct vpe_notifications *notifier; + + list_for_each_entry(notifier, &vpe->notify, list) + notifier->stop(aprp_cpu_index()); + + release_progmem(vpe->load_addr); + vpe->state = VPE_STATE_UNUSED; + + return len; +} +static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill); + +static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr, + char *buf) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + + return sprintf(buf, "%d\n", vpe->ntcs); +} + +static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + unsigned long new; + int ret; + + ret = kstrtoul(buf, 0, &new); + if (ret < 0) + return ret; + + /* APRP can only reserve one TC in a VPE and no more. */ + if (new != 1) + return -EINVAL; + + vpe->ntcs = new; + + return len; +} +static DEVICE_ATTR_RW(ntcs); + +static struct attribute *vpe_attrs[] = { + &dev_attr_kill.attr, + &dev_attr_ntcs.attr, + NULL, +}; +ATTRIBUTE_GROUPS(vpe); + +static void vpe_device_release(struct device *cd) +{ +} + +static struct class vpe_class = { + .name = "vpe", + .owner = THIS_MODULE, + .dev_release = vpe_device_release, + .dev_groups = vpe_groups, +}; + +static struct device vpe_device; + +int __init vpe_module_init(void) +{ + struct vpe *v = NULL; + struct tc *t; + int err; + + if (!cpu_has_mipsmt) { + pr_warn("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if (num_possible_cpus() - aprp_cpu_index() < 1) { + pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n" + "Pass maxcpus=<n> argument as kernel argument\n"); + return -ENODEV; + } + + major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops); + if (major < 0) { + pr_warn("VPE loader: unable to register character device\n"); + return major; + } + + err = class_register(&vpe_class); + if (err) { + pr_err("vpe_class registration failed\n"); + goto out_chrdev; + } + + device_initialize(&vpe_device); + vpe_device.class = &vpe_class, + vpe_device.parent = NULL, + dev_set_name(&vpe_device, "vpe_sp"); + vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR); + err = device_add(&vpe_device); + if (err) { + pr_err("Adding vpe_device failed\n"); + goto out_class; + } + + t = alloc_tc(aprp_cpu_index()); + if (!t) { + pr_warn("VPE: unable to allocate TC\n"); + err = -ENOMEM; + goto out_dev; + } + + /* VPE */ + v = alloc_vpe(aprp_cpu_index()); + if (v == NULL) { + pr_warn("VPE: unable to allocate VPE\n"); + kfree(t); + err = -ENOMEM; + goto out_dev; + } + + v->ntcs = 1; + + /* add the tc to the list of this vpe's tc's. */ + list_add(&t->tc, &v->tc); + + /* TC */ + t->pvpe = v; /* set the parent vpe */ + + return 0; + +out_dev: + device_del(&vpe_device); + +out_class: + put_device(&vpe_device); + class_unregister(&vpe_class); + +out_chrdev: + unregister_chrdev(major, VPE_MODULE_NAME); + + return err; +} + +void __exit vpe_module_exit(void) +{ + struct vpe *v, *n; + + device_unregister(&vpe_device); + class_unregister(&vpe_class); + unregister_chrdev(major, VPE_MODULE_NAME); + + /* No locking needed here */ + list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) + if (v->state != VPE_STATE_UNUSED) + release_vpe(v); +} diff --git a/arch/mips/kernel/vpe-mt.c b/arch/mips/kernel/vpe-mt.c new file mode 100644 index 000000000..496ed8f36 --- /dev/null +++ b/arch/mips/kernel/vpe-mt.c @@ -0,0 +1,520 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/mips_mt.h> +#include <asm/vpe.h> + +static int major; + +/* The number of TCs and VPEs physically available on the core */ +static int hw_tcs, hw_vpes; + +/* We are prepared so configure and start the VPE... */ +int vpe_run(struct vpe *v) +{ + unsigned long flags, val, dmt_flag; + struct vpe_notifications *notifier; + unsigned int vpeflags; + struct tc *t; + + /* check we are the Master VPE */ + local_irq_save(flags); + val = read_c0_vpeconf0(); + if (!(val & VPECONF0_MVP)) { + pr_warn("VPE loader: only Master VPE's are able to config MT\n"); + local_irq_restore(flags); + + return -1; + } + + dmt_flag = dmt(); + vpeflags = dvpe(); + + if (list_empty(&v->tc)) { + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + pr_warn("VPE loader: No TC's associated with VPE %d\n", + v->minor); + + return -ENOEXEC; + } + + t = list_first_entry(&v->tc, struct tc, tc); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(t->index); + + /* should check it is halted, and not activated */ + if ((read_tc_c0_tcstatus() & TCSTATUS_A) || + !(read_tc_c0_tchalt() & TCHALT_H)) { + evpe(vpeflags); + emt(dmt_flag); + local_irq_restore(flags); + + pr_warn("VPE loader: TC %d is already active!\n", + t->index); + + return -ENOEXEC; + } + + /* + * Write the address we want it to start running from in the TCPC + * register. + */ + write_tc_c0_tcrestart((unsigned long)v->__start); + write_tc_c0_tccontext((unsigned long)0); + + /* + * Mark the TC as activated, not interrupt exempt and not dynamically + * allocatable + */ + val = read_tc_c0_tcstatus(); + val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; + write_tc_c0_tcstatus(val); + + write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); + + /* + * We don't pass the memsize here, so VPE programs need to be + * compiled with DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined. + */ + mttgpr(7, 0); + mttgpr(6, v->ntcs); + + /* set up VPE1 */ + /* + * bind the TC to VPE 1 as late as possible so we only have the final + * VPE registers to set up, and so an EJTAG probe can trigger on it + */ + write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1); + + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA)); + + back_to_back_c0_hazard(); + + /* Set up the XTC bit in vpeconf0 to point at our tc */ + write_vpe_c0_vpeconf0((read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC)) + | (t->index << VPECONF0_XTC_SHIFT)); + + back_to_back_c0_hazard(); + + /* enable this VPE */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); + + /* clear out any left overs from a previous program */ + write_vpe_c0_status(0); + write_vpe_c0_cause(0); + + /* take system out of configuration state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + /* + * SMVP kernels manage VPE enable independently, but uniprocessor + * kernels need to turn it on, even if that wasn't the pre-dvpe() state. + */ +#ifdef CONFIG_SMP + evpe(vpeflags); +#else + evpe(EVPE_ENABLE); +#endif + emt(dmt_flag); + local_irq_restore(flags); + + list_for_each_entry(notifier, &v->notify, list) + notifier->start(VPE_MODULE_MINOR); + + return 0; +} + +void cleanup_tc(struct tc *tc) +{ + unsigned long flags; + unsigned int mtflags, vpflags; + int tmp; + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(tc->index); + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); +} + +/* module wrapper entry points */ +/* give me a vpe */ +void *vpe_alloc(void) +{ + int i; + struct vpe *v; + + /* find a vpe */ + for (i = 1; i < MAX_VPES; i++) { + v = get_vpe(i); + if (v != NULL) { + v->state = VPE_STATE_INUSE; + return v; + } + } + return NULL; +} +EXPORT_SYMBOL(vpe_alloc); + +/* start running from here */ +int vpe_start(void *vpe, unsigned long start) +{ + struct vpe *v = vpe; + + v->__start = start; + return vpe_run(v); +} +EXPORT_SYMBOL(vpe_start); + +/* halt it for now */ +int vpe_stop(void *vpe) +{ + struct vpe *v = vpe; + struct tc *t; + unsigned int evpe_flags; + + evpe_flags = dvpe(); + + t = list_entry(v->tc.next, struct tc, tc); + if (t != NULL) { + settc(t->index); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); + } + + evpe(evpe_flags); + + return 0; +} +EXPORT_SYMBOL(vpe_stop); + +/* I've done with it thank you */ +int vpe_free(void *vpe) +{ + struct vpe *v = vpe; + struct tc *t; + unsigned int evpe_flags; + + t = list_entry(v->tc.next, struct tc, tc); + if (t == NULL) + return -ENOEXEC; + + evpe_flags = dvpe(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + settc(t->index); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); + + /* halt the TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + /* mark the TC unallocated */ + write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); + + v->state = VPE_STATE_UNUSED; + + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(evpe_flags); + + return 0; +} +EXPORT_SYMBOL(vpe_free); + +static ssize_t store_kill(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + struct vpe_notifications *notifier; + + list_for_each_entry(notifier, &vpe->notify, list) + notifier->stop(aprp_cpu_index()); + + release_progmem(vpe->load_addr); + cleanup_tc(get_tc(aprp_cpu_index())); + vpe_stop(vpe); + vpe_free(vpe); + + return len; +} +static DEVICE_ATTR(kill, S_IWUSR, NULL, store_kill); + +static ssize_t ntcs_show(struct device *cd, struct device_attribute *attr, + char *buf) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + + return sprintf(buf, "%d\n", vpe->ntcs); +} + +static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + struct vpe *vpe = get_vpe(aprp_cpu_index()); + unsigned long new; + int ret; + + ret = kstrtoul(buf, 0, &new); + if (ret < 0) + return ret; + + if (new == 0 || new > (hw_tcs - aprp_cpu_index())) + return -EINVAL; + + vpe->ntcs = new; + + return len; +} +static DEVICE_ATTR_RW(ntcs); + +static struct attribute *vpe_attrs[] = { + &dev_attr_kill.attr, + &dev_attr_ntcs.attr, + NULL, +}; +ATTRIBUTE_GROUPS(vpe); + +static void vpe_device_release(struct device *cd) +{ +} + +static struct class vpe_class = { + .name = "vpe", + .owner = THIS_MODULE, + .dev_release = vpe_device_release, + .dev_groups = vpe_groups, +}; + +static struct device vpe_device; + +int __init vpe_module_init(void) +{ + unsigned int mtflags, vpflags; + unsigned long flags, val; + struct vpe *v = NULL; + struct tc *t; + int tc, err; + + if (!cpu_has_mipsmt) { + pr_warn("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if (vpelimit == 0) { + pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n" + "Pass maxvpes=<n> argument as kernel argument\n"); + + return -ENODEV; + } + + if (aprp_cpu_index() == 0) { + pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n" + "Pass maxtcs=<n> argument as kernel argument\n"); + + return -ENODEV; + } + + major = register_chrdev(0, VPE_MODULE_NAME, &vpe_fops); + if (major < 0) { + pr_warn("VPE loader: unable to register character device\n"); + return major; + } + + err = class_register(&vpe_class); + if (err) { + pr_err("vpe_class registration failed\n"); + goto out_chrdev; + } + + device_initialize(&vpe_device); + vpe_device.class = &vpe_class, + vpe_device.parent = NULL, + dev_set_name(&vpe_device, "vpe1"); + vpe_device.devt = MKDEV(major, VPE_MODULE_MINOR); + err = device_add(&vpe_device); + if (err) { + pr_err("Adding vpe_device failed\n"); + goto out_class; + } + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + + /* Put MVPE's into 'configuration state' */ + set_c0_mvpcontrol(MVPCONTROL_VPC); + + val = read_c0_mvpconf0(); + hw_tcs = (val & MVPCONF0_PTC) + 1; + hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1; + + for (tc = aprp_cpu_index(); tc < hw_tcs; tc++) { + /* + * Must re-enable multithreading temporarily or in case we + * reschedule send IPIs or similar we might hang. + */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); + t = alloc_tc(tc); + if (!t) { + err = -ENOMEM; + goto out_dev; + } + + local_irq_save(flags); + mtflags = dmt(); + vpflags = dvpe(); + set_c0_mvpcontrol(MVPCONTROL_VPC); + + /* VPE's */ + if (tc < hw_tcs) { + settc(tc); + + v = alloc_vpe(tc); + if (v == NULL) { + pr_warn("VPE: unable to allocate VPE\n"); + goto out_reenable; + } + + v->ntcs = hw_tcs - aprp_cpu_index(); + + /* add the tc to the list of this vpe's tc's. */ + list_add(&t->tc, &v->tc); + + /* deactivate all but vpe0 */ + if (tc >= aprp_cpu_index()) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + } + + /* disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & + ~VPECONTROL_TE); + + if (tc >= vpelimit) { + /* + * Set config to be the same as vpe0, + * particularly kseg0 coherency alg + */ + write_vpe_c0_config(read_c0_config()); + } + } + + /* TC's */ + t->pvpe = v; /* set the parent vpe */ + + if (tc >= aprp_cpu_index()) { + unsigned long tmp; + + settc(tc); + + /* + * A TC that is bound to any other VPE gets bound to + * VPE0, ideally I'd like to make it homeless but it + * doesn't appear to let me bind a TC to a non-existent + * VPE. Which is perfectly reasonable. + * + * The (un)bound state is visible to an EJTAG probe so + * may notify GDB... + */ + tmp = read_tc_c0_tcbind(); + if (tmp & TCBIND_CURVPE) { + /* tc is bound >vpe0 */ + write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE); + + t->pvpe = get_vpe(0); /* set the parent vpe */ + } + + /* halt the TC */ + write_tc_c0_tchalt(TCHALT_H); + mips_ihb(); + + tmp = read_tc_c0_tcstatus(); + + /* mark not activated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + } + } + +out_reenable: + /* release config state */ + clear_c0_mvpcontrol(MVPCONTROL_VPC); + + evpe(vpflags); + emt(mtflags); + local_irq_restore(flags); + + return 0; + +out_dev: + device_del(&vpe_device); + +out_class: + put_device(&vpe_device); + class_unregister(&vpe_class); + +out_chrdev: + unregister_chrdev(major, VPE_MODULE_NAME); + + return err; +} + +void __exit vpe_module_exit(void) +{ + struct vpe *v, *n; + + device_unregister(&vpe_device); + class_unregister(&vpe_class); + unregister_chrdev(major, VPE_MODULE_NAME); + + /* No locking needed here */ + list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) { + if (v->state != VPE_STATE_UNUSED) + release_vpe(v); + } +} diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c new file mode 100644 index 000000000..d0d832ab3 --- /dev/null +++ b/arch/mips/kernel/vpe.c @@ -0,0 +1,933 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Imagination Technologies Ltd. + * + * VPE spport module for loading a MIPS SP program into VPE1. The SP + * environment is rather simple since there are no TLBs. It needs + * to be relocatable (or partiall linked). Initialize your stack in + * the startup-code. The loader looks for the symbol __start and sets + * up the execution to resume from there. To load and run, simply do + * a cat SP 'binary' to the /dev/vpe1 device. + */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/vmalloc.h> +#include <linux/elf.h> +#include <linux/seq_file.h> +#include <linux/syscalls.h> +#include <linux/moduleloader.h> +#include <linux/interrupt.h> +#include <linux/poll.h> +#include <linux/memblock.h> +#include <asm/mipsregs.h> +#include <asm/mipsmtregs.h> +#include <asm/cacheflush.h> +#include <linux/atomic.h> +#include <asm/mips_mt.h> +#include <asm/processor.h> +#include <asm/vpe.h> + +#ifndef ARCH_SHF_SMALL +#define ARCH_SHF_SMALL 0 +#endif + +/* If this is set, the section belongs in the init part of the module */ +#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) + +struct vpe_control vpecontrol = { + .vpe_list_lock = __SPIN_LOCK_UNLOCKED(vpe_list_lock), + .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list), + .tc_list_lock = __SPIN_LOCK_UNLOCKED(tc_list_lock), + .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) +}; + +/* get the vpe associated with this minor */ +struct vpe *get_vpe(int minor) +{ + struct vpe *res, *v; + + if (!cpu_has_mipsmt) + return NULL; + + res = NULL; + spin_lock(&vpecontrol.vpe_list_lock); + list_for_each_entry(v, &vpecontrol.vpe_list, list) { + if (v->minor == VPE_MODULE_MINOR) { + res = v; + break; + } + } + spin_unlock(&vpecontrol.vpe_list_lock); + + return res; +} + +/* get the vpe associated with this minor */ +struct tc *get_tc(int index) +{ + struct tc *res, *t; + + res = NULL; + spin_lock(&vpecontrol.tc_list_lock); + list_for_each_entry(t, &vpecontrol.tc_list, list) { + if (t->index == index) { + res = t; + break; + } + } + spin_unlock(&vpecontrol.tc_list_lock); + + return res; +} + +/* allocate a vpe and associate it with this minor (or index) */ +struct vpe *alloc_vpe(int minor) +{ + struct vpe *v; + + v = kzalloc(sizeof(struct vpe), GFP_KERNEL); + if (v == NULL) + goto out; + + INIT_LIST_HEAD(&v->tc); + spin_lock(&vpecontrol.vpe_list_lock); + list_add_tail(&v->list, &vpecontrol.vpe_list); + spin_unlock(&vpecontrol.vpe_list_lock); + + INIT_LIST_HEAD(&v->notify); + v->minor = VPE_MODULE_MINOR; + +out: + return v; +} + +/* allocate a tc. At startup only tc0 is running, all other can be halted. */ +struct tc *alloc_tc(int index) +{ + struct tc *tc; + + tc = kzalloc(sizeof(struct tc), GFP_KERNEL); + if (tc == NULL) + goto out; + + INIT_LIST_HEAD(&tc->tc); + tc->index = index; + + spin_lock(&vpecontrol.tc_list_lock); + list_add_tail(&tc->list, &vpecontrol.tc_list); + spin_unlock(&vpecontrol.tc_list_lock); + +out: + return tc; +} + +/* clean up and free everything */ +void release_vpe(struct vpe *v) +{ + list_del(&v->list); + if (v->load_addr) + release_progmem(v->load_addr); + kfree(v); +} + +/* Find some VPE program space */ +void *alloc_progmem(unsigned long len) +{ + void *addr; + +#ifdef CONFIG_MIPS_VPE_LOADER_TOM + /* + * This means you must tell Linux to use less memory than you + * physically have, for example by passing a mem= boot argument. + */ + addr = pfn_to_kaddr(max_low_pfn); + memset(addr, 0, len); +#else + /* simple grab some mem for now */ + addr = kzalloc(len, GFP_KERNEL); +#endif + + return addr; +} + +void release_progmem(void *ptr) +{ +#ifndef CONFIG_MIPS_VPE_LOADER_TOM + kfree(ptr); +#endif +} + +/* Update size with this section: return offset. */ +static long get_offset(unsigned long *size, Elf_Shdr *sechdr) +{ + long ret; + + ret = ALIGN(*size, sechdr->sh_addralign ? : 1); + *size = ret + sechdr->sh_size; + return ret; +} + +/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld + might -- code, read-only data, read-write data, small data. Tally + sizes, and place the offsets into sh_entsize fields: high bit means it + belongs in init. */ +static void layout_sections(struct module *mod, const Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, const char *secstrings) +{ + static unsigned long const masks[][2] = { + /* NOTE: all executable code must be the first section + * in this array; otherwise modify the text_size + * finder in the two loops below */ + {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL}, + {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL}, + {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL}, + {ARCH_SHF_SMALL | SHF_ALLOC, 0} + }; + unsigned int m, i; + + for (i = 0; i < hdr->e_shnum; i++) + sechdrs[i].sh_entsize = ~0UL; + + for (m = 0; m < ARRAY_SIZE(masks); ++m) { + for (i = 0; i < hdr->e_shnum; ++i) { + Elf_Shdr *s = &sechdrs[i]; + + if ((s->sh_flags & masks[m][0]) != masks[m][0] + || (s->sh_flags & masks[m][1]) + || s->sh_entsize != ~0UL) + continue; + s->sh_entsize = + get_offset((unsigned long *)&mod->core_layout.size, s); + } + + if (m == 0) + mod->core_layout.text_size = mod->core_layout.size; + + } +} + +/* from module-elf32.c, but subverted a little */ + +struct mips_hi16 { + struct mips_hi16 *next; + Elf32_Addr *addr; + Elf32_Addr value; +}; + +static struct mips_hi16 *mips_hi16_list; +static unsigned int gp_offs, gp_addr; + +static int apply_r_mips_none(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + return 0; +} + +static int apply_r_mips_gprel16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + int rel; + + if (!(*location & 0xffff)) { + rel = (int)v - gp_addr; + } else { + /* .sbss + gp(relative) + offset */ + /* kludge! */ + rel = (int)(short)((int)v + gp_offs + + (int)(short)(*location & 0xffff) - gp_addr); + } + + if ((rel > 32768) || (rel < -32768)) { + pr_debug("VPE loader: apply_r_mips_gprel16: relative address 0x%x out of range of gp register\n", + rel); + return -ENOEXEC; + } + + *location = (*location & 0xffff0000) | (rel & 0xffff); + + return 0; +} + +static int apply_r_mips_pc16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + int rel; + rel = (((unsigned int)v - (unsigned int)location)); + rel >>= 2; /* because the offset is in _instructions_ not bytes. */ + rel -= 1; /* and one instruction less due to the branch delay slot. */ + + if ((rel > 32768) || (rel < -32768)) { + pr_debug("VPE loader: apply_r_mips_pc16: relative address out of range 0x%x\n", + rel); + return -ENOEXEC; + } + + *location = (*location & 0xffff0000) | (rel & 0xffff); + + return 0; +} + +static int apply_r_mips_32(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + *location += v; + + return 0; +} + +static int apply_r_mips_26(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + if (v % 4) { + pr_debug("VPE loader: apply_r_mips_26: unaligned relocation\n"); + return -ENOEXEC; + } + +/* + * Not desperately convinced this is a good check of an overflow condition + * anyway. But it gets in the way of handling undefined weak symbols which + * we want to set to zero. + * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + * printk(KERN_ERR + * "module %s: relocation overflow\n", + * me->name); + * return -ENOEXEC; + * } + */ + + *location = (*location & ~0x03ffffff) | + ((*location + (v >> 2)) & 0x03ffffff); + return 0; +} + +static int apply_r_mips_hi16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + struct mips_hi16 *n; + + /* + * We cannot relocate this one now because we don't know the value of + * the carry we need to add. Save the information, and let LO16 do the + * actual relocation. + */ + n = kmalloc(sizeof(*n), GFP_KERNEL); + if (!n) + return -ENOMEM; + + n->addr = location; + n->value = v; + n->next = mips_hi16_list; + mips_hi16_list = n; + + return 0; +} + +static int apply_r_mips_lo16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + unsigned long insnlo = *location; + Elf32_Addr val, vallo; + struct mips_hi16 *l, *next; + + /* Sign extend the addend we extract from the lo insn. */ + vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; + + if (mips_hi16_list != NULL) { + + l = mips_hi16_list; + while (l != NULL) { + unsigned long insn; + + /* + * The value for the HI16 had best be the same. + */ + if (v != l->value) { + pr_debug("VPE loader: apply_r_mips_lo16/hi16: inconsistent value information\n"); + goto out_free; + } + + /* + * Do the HI16 relocation. Note that we actually don't + * need to know anything about the LO16 itself, except + * where to find the low 16 bits of the addend needed + * by the LO16. + */ + insn = *l->addr; + val = ((insn & 0xffff) << 16) + vallo; + val += v; + + /* + * Account for the sign extension that will happen in + * the low bits. + */ + val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; + + insn = (insn & ~0xffff) | val; + *l->addr = insn; + + next = l->next; + kfree(l); + l = next; + } + + mips_hi16_list = NULL; + } + + /* + * Ok, we're done with the HI16 relocs. Now deal with the LO16. + */ + val = v + vallo; + insnlo = (insnlo & ~0xffff) | (val & 0xffff); + *location = insnlo; + + return 0; + +out_free: + while (l != NULL) { + next = l->next; + kfree(l); + l = next; + } + mips_hi16_list = NULL; + + return -ENOEXEC; +} + +static int (*reloc_handlers[]) (struct module *me, uint32_t *location, + Elf32_Addr v) = { + [R_MIPS_NONE] = apply_r_mips_none, + [R_MIPS_32] = apply_r_mips_32, + [R_MIPS_26] = apply_r_mips_26, + [R_MIPS_HI16] = apply_r_mips_hi16, + [R_MIPS_LO16] = apply_r_mips_lo16, + [R_MIPS_GPREL16] = apply_r_mips_gprel16, + [R_MIPS_PC16] = apply_r_mips_pc16 +}; + +static char *rstrs[] = { + [R_MIPS_NONE] = "MIPS_NONE", + [R_MIPS_32] = "MIPS_32", + [R_MIPS_26] = "MIPS_26", + [R_MIPS_HI16] = "MIPS_HI16", + [R_MIPS_LO16] = "MIPS_LO16", + [R_MIPS_GPREL16] = "MIPS_GPREL16", + [R_MIPS_PC16] = "MIPS_PC16" +}; + +static int apply_relocations(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + unsigned int i; + Elf32_Addr v; + int res; + + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + Elf32_Word r_info = rel[i].r_info; + + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(r_info); + + if (!sym->st_value) { + pr_debug("%s: undefined weak symbol %s\n", + me->name, strtab + sym->st_name); + /* just print the warning, dont barf */ + } + + v = sym->st_value; + + res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); + if (res) { + char *r = rstrs[ELF32_R_TYPE(r_info)]; + pr_warn("VPE loader: .text+0x%x relocation type %s for symbol \"%s\" failed\n", + rel[i].r_offset, r ? r : "UNKNOWN", + strtab + sym->st_name); + return res; + } + } + + return 0; +} + +static inline void save_gp_address(unsigned int secbase, unsigned int rel) +{ + gp_addr = secbase + rel; + gp_offs = gp_addr - (secbase & 0xffff0000); +} +/* end module-elf32.c */ + +/* Change all symbols so that sh_value encodes the pointer directly. */ +static void simplify_symbols(Elf_Shdr *sechdrs, + unsigned int symindex, + const char *strtab, + const char *secstrings, + unsigned int nsecs, struct module *mod) +{ + Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; + unsigned long secbase, bssbase = 0; + unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); + int size; + + /* find the .bss section for COMMON symbols */ + for (i = 0; i < nsecs; i++) { + if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) { + bssbase = sechdrs[i].sh_addr; + break; + } + } + + for (i = 1; i < n; i++) { + switch (sym[i].st_shndx) { + case SHN_COMMON: + /* Allocate space for the symbol in the .bss section. + st_value is currently size. + We want it to have the address of the symbol. */ + + size = sym[i].st_value; + sym[i].st_value = bssbase; + + bssbase += size; + break; + + case SHN_ABS: + /* Don't need to do anything */ + break; + + case SHN_UNDEF: + /* ret = -ENOENT; */ + break; + + case SHN_MIPS_SCOMMON: + pr_debug("simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n", + strtab + sym[i].st_name, sym[i].st_shndx); + /* .sbss section */ + break; + + default: + secbase = sechdrs[sym[i].st_shndx].sh_addr; + + if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) + save_gp_address(secbase, sym[i].st_value); + + sym[i].st_value += secbase; + break; + } + } +} + +#ifdef DEBUG_ELFLOADER +static void dump_elfsymbols(Elf_Shdr *sechdrs, unsigned int symindex, + const char *strtab, struct module *mod) +{ + Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; + unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); + + pr_debug("dump_elfsymbols: n %d\n", n); + for (i = 1; i < n; i++) { + pr_debug(" i %d name <%s> 0x%x\n", i, strtab + sym[i].st_name, + sym[i].st_value); + } +} +#endif + +static int find_vpe_symbols(struct vpe *v, Elf_Shdr *sechdrs, + unsigned int symindex, const char *strtab, + struct module *mod) +{ + Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; + unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); + + for (i = 1; i < n; i++) { + if (strcmp(strtab + sym[i].st_name, "__start") == 0) + v->__start = sym[i].st_value; + + if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) + v->shared_ptr = (void *)sym[i].st_value; + } + + if ((v->__start == 0) || (v->shared_ptr == NULL)) + return -1; + + return 0; +} + +/* + * Allocates a VPE with some program code space(the load address), copies the + * contents of the program (p)buffer performing relocatations/etc, free's it + * when finished. + */ +static int vpe_elfload(struct vpe *v) +{ + Elf_Ehdr *hdr; + Elf_Shdr *sechdrs; + long err = 0; + char *secstrings, *strtab = NULL; + unsigned int len, i, symindex = 0, strindex = 0, relocate = 0; + struct module mod; /* so we can re-use the relocations code */ + + memset(&mod, 0, sizeof(struct module)); + strcpy(mod.name, "VPE loader"); + + hdr = (Elf_Ehdr *) v->pbuffer; + len = v->plen; + + /* Sanity checks against insmoding binaries or wrong arch, + weird elf version */ + if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0 + || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC) + || !elf_check_arch(hdr) + || hdr->e_shentsize != sizeof(*sechdrs)) { + pr_warn("VPE loader: program wrong arch or weird elf version\n"); + + return -ENOEXEC; + } + + if (hdr->e_type == ET_REL) + relocate = 1; + + if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) { + pr_err("VPE loader: program length %u truncated\n", len); + + return -ENOEXEC; + } + + /* Convenience variables */ + sechdrs = (void *)hdr + hdr->e_shoff; + secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + sechdrs[0].sh_addr = 0; + + /* And these should exist, but gcc whinges if we don't init them */ + symindex = strindex = 0; + + if (relocate) { + for (i = 1; i < hdr->e_shnum; i++) { + if ((sechdrs[i].sh_type != SHT_NOBITS) && + (len < sechdrs[i].sh_offset + sechdrs[i].sh_size)) { + pr_err("VPE program length %u truncated\n", + len); + return -ENOEXEC; + } + + /* Mark all sections sh_addr with their address in the + temporary image. */ + sechdrs[i].sh_addr = (size_t) hdr + + sechdrs[i].sh_offset; + + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + + sechdrs[strindex].sh_offset; + } + } + layout_sections(&mod, hdr, sechdrs, secstrings); + } + + v->load_addr = alloc_progmem(mod.core_layout.size); + if (!v->load_addr) + return -ENOMEM; + + pr_info("VPE loader: loading to %p\n", v->load_addr); + + if (relocate) { + for (i = 0; i < hdr->e_shnum; i++) { + void *dest; + + if (!(sechdrs[i].sh_flags & SHF_ALLOC)) + continue; + + dest = v->load_addr + sechdrs[i].sh_entsize; + + if (sechdrs[i].sh_type != SHT_NOBITS) + memcpy(dest, (void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size); + /* Update sh_addr to point to copy in image. */ + sechdrs[i].sh_addr = (unsigned long)dest; + + pr_debug(" section sh_name %s sh_addr 0x%x\n", + secstrings + sechdrs[i].sh_name, + sechdrs[i].sh_addr); + } + + /* Fix up syms, so that st_value is a pointer to location. */ + simplify_symbols(sechdrs, symindex, strtab, secstrings, + hdr->e_shnum, &mod); + + /* Now do relocations. */ + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + /* Don't bother with non-allocated sections */ + if (!(sechdrs[info].sh_flags & SHF_ALLOC)) + continue; + + if (sechdrs[i].sh_type == SHT_REL) + err = apply_relocations(sechdrs, strtab, + symindex, i, &mod); + else if (sechdrs[i].sh_type == SHT_RELA) + err = apply_relocate_add(sechdrs, strtab, + symindex, i, &mod); + if (err < 0) + return err; + + } + } else { + struct elf_phdr *phdr = (struct elf_phdr *) + ((char *)hdr + hdr->e_phoff); + + for (i = 0; i < hdr->e_phnum; i++) { + if (phdr->p_type == PT_LOAD) { + memcpy((void *)phdr->p_paddr, + (char *)hdr + phdr->p_offset, + phdr->p_filesz); + memset((void *)phdr->p_paddr + phdr->p_filesz, + 0, phdr->p_memsz - phdr->p_filesz); + } + phdr++; + } + + for (i = 0; i < hdr->e_shnum; i++) { + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + + sechdrs[strindex].sh_offset; + + /* + * mark symtab's address for when we try + * to find the magic symbols + */ + sechdrs[i].sh_addr = (size_t) hdr + + sechdrs[i].sh_offset; + } + } + } + + /* make sure it's physically written out */ + flush_icache_range((unsigned long)v->load_addr, + (unsigned long)v->load_addr + v->len); + + if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) { + if (v->__start == 0) { + pr_warn("VPE loader: program does not contain a __start symbol\n"); + return -ENOEXEC; + } + + if (v->shared_ptr == NULL) + pr_warn("VPE loader: program does not contain vpe_shared symbol.\n" + " Unable to use AMVP (AP/SP) facilities.\n"); + } + + pr_info(" elf loaded\n"); + return 0; +} + +static int getcwd(char *buff, int size) +{ + mm_segment_t old_fs; + int ret; + + old_fs = get_fs(); + set_fs(KERNEL_DS); + + ret = sys_getcwd(buff, size); + + set_fs(old_fs); + + return ret; +} + +/* checks VPE is unused and gets ready to load program */ +static int vpe_open(struct inode *inode, struct file *filp) +{ + enum vpe_state state; + struct vpe_notifications *notifier; + struct vpe *v; + int ret; + + if (VPE_MODULE_MINOR != iminor(inode)) { + /* assume only 1 device at the moment. */ + pr_warn("VPE loader: only vpe1 is supported\n"); + + return -ENODEV; + } + + v = get_vpe(aprp_cpu_index()); + if (v == NULL) { + pr_warn("VPE loader: unable to get vpe\n"); + + return -ENODEV; + } + + state = xchg(&v->state, VPE_STATE_INUSE); + if (state != VPE_STATE_UNUSED) { + pr_debug("VPE loader: tc in use dumping regs\n"); + + list_for_each_entry(notifier, &v->notify, list) + notifier->stop(aprp_cpu_index()); + + release_progmem(v->load_addr); + cleanup_tc(get_tc(aprp_cpu_index())); + } + + /* this of-course trashes what was there before... */ + v->pbuffer = vmalloc(P_SIZE); + if (!v->pbuffer) { + pr_warn("VPE loader: unable to allocate memory\n"); + return -ENOMEM; + } + v->plen = P_SIZE; + v->load_addr = NULL; + v->len = 0; + + v->cwd[0] = 0; + ret = getcwd(v->cwd, VPE_PATH_MAX); + if (ret < 0) + pr_warn("VPE loader: open, getcwd returned %d\n", ret); + + v->shared_ptr = NULL; + v->__start = 0; + + return 0; +} + +static int vpe_release(struct inode *inode, struct file *filp) +{ +#if defined(CONFIG_MIPS_VPE_LOADER_MT) || defined(CONFIG_MIPS_VPE_LOADER_CMP) + struct vpe *v; + Elf_Ehdr *hdr; + int ret = 0; + + v = get_vpe(aprp_cpu_index()); + if (v == NULL) + return -ENODEV; + + hdr = (Elf_Ehdr *) v->pbuffer; + if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) { + if (vpe_elfload(v) >= 0) { + vpe_run(v); + } else { + pr_warn("VPE loader: ELF load failed.\n"); + ret = -ENOEXEC; + } + } else { + pr_warn("VPE loader: only elf files are supported\n"); + ret = -ENOEXEC; + } + + /* It's good to be able to run the SP and if it chokes have a look at + the /dev/rt?. But if we reset the pointer to the shared struct we + lose what has happened. So perhaps if garbage is sent to the vpe + device, use it as a trigger for the reset. Hopefully a nice + executable will be along shortly. */ + if (ret < 0) + v->shared_ptr = NULL; + + vfree(v->pbuffer); + v->plen = 0; + + return ret; +#else + pr_warn("VPE loader: ELF load failed.\n"); + return -ENOEXEC; +#endif +} + +static ssize_t vpe_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + size_t ret = count; + struct vpe *v; + + if (iminor(file_inode(file)) != VPE_MODULE_MINOR) + return -ENODEV; + + v = get_vpe(aprp_cpu_index()); + + if (v == NULL) + return -ENODEV; + + if ((count + v->len) > v->plen) { + pr_warn("VPE loader: elf size too big. Perhaps strip unneeded symbols\n"); + return -ENOMEM; + } + + count -= copy_from_user(v->pbuffer + v->len, buffer, count); + if (!count) + return -EFAULT; + + v->len += count; + return ret; +} + +const struct file_operations vpe_fops = { + .owner = THIS_MODULE, + .open = vpe_open, + .release = vpe_release, + .write = vpe_write, + .llseek = noop_llseek, +}; + +void *vpe_get_shared(int index) +{ + struct vpe *v = get_vpe(index); + + if (v == NULL) + return NULL; + + return v->shared_ptr; +} +EXPORT_SYMBOL(vpe_get_shared); + +int vpe_notify(int index, struct vpe_notifications *notify) +{ + struct vpe *v = get_vpe(index); + + if (v == NULL) + return -1; + + list_add(¬ify->list, &v->notify); + return 0; +} +EXPORT_SYMBOL(vpe_notify); + +char *vpe_getcwd(int index) +{ + struct vpe *v = get_vpe(index); + + if (v == NULL) + return NULL; + + return v->cwd; +} +EXPORT_SYMBOL(vpe_getcwd); + +module_init(vpe_module_init); +module_exit(vpe_module_exit); +MODULE_DESCRIPTION("MIPS VPE Loader"); +MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc."); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/watch.c b/arch/mips/kernel/watch.c new file mode 100644 index 000000000..c9263b95c --- /dev/null +++ b/arch/mips/kernel/watch.c @@ -0,0 +1,211 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 David Daney + */ + +#include <linux/sched.h> + +#include <asm/processor.h> +#include <asm/watch.h> + +/* + * Install the watch registers for the current thread. A maximum of + * four registers are installed although the machine may have more. + */ +void mips_install_watch_registers(struct task_struct *t) +{ + struct mips3264_watch_reg_state *watches = &t->thread.watch.mips3264; + unsigned int watchhi = MIPS_WATCHHI_G | /* Trap all ASIDs */ + MIPS_WATCHHI_IRW; /* Clear result bits */ + + switch (current_cpu_data.watch_reg_use_cnt) { + default: + BUG(); + case 4: + write_c0_watchlo3(watches->watchlo[3]); + write_c0_watchhi3(watchhi | watches->watchhi[3]); + fallthrough; + case 3: + write_c0_watchlo2(watches->watchlo[2]); + write_c0_watchhi2(watchhi | watches->watchhi[2]); + fallthrough; + case 2: + write_c0_watchlo1(watches->watchlo[1]); + write_c0_watchhi1(watchhi | watches->watchhi[1]); + fallthrough; + case 1: + write_c0_watchlo0(watches->watchlo[0]); + write_c0_watchhi0(watchhi | watches->watchhi[0]); + } +} + +/* + * Read back the watchhi registers so the user space debugger has + * access to the I, R, and W bits. A maximum of four registers are + * read although the machine may have more. + */ +void mips_read_watch_registers(void) +{ + struct mips3264_watch_reg_state *watches = + ¤t->thread.watch.mips3264; + unsigned int watchhi_mask = MIPS_WATCHHI_MASK | MIPS_WATCHHI_IRW; + + switch (current_cpu_data.watch_reg_use_cnt) { + default: + BUG(); + case 4: + watches->watchhi[3] = (read_c0_watchhi3() & watchhi_mask); + fallthrough; + case 3: + watches->watchhi[2] = (read_c0_watchhi2() & watchhi_mask); + fallthrough; + case 2: + watches->watchhi[1] = (read_c0_watchhi1() & watchhi_mask); + fallthrough; + case 1: + watches->watchhi[0] = (read_c0_watchhi0() & watchhi_mask); + } + if (current_cpu_data.watch_reg_use_cnt == 1 && + (watches->watchhi[0] & MIPS_WATCHHI_IRW) == 0) { + /* Pathological case of release 1 architecture that + * doesn't set the condition bits. We assume that + * since we got here, the watch condition was met and + * signal that the conditions requested in watchlo + * were met. */ + watches->watchhi[0] |= (watches->watchlo[0] & MIPS_WATCHHI_IRW); + } + } + +/* + * Disable all watch registers. Although only four registers are + * installed, all are cleared to eliminate the possibility of endless + * looping in the watch handler. + */ +void mips_clear_watch_registers(void) +{ + switch (current_cpu_data.watch_reg_count) { + default: + BUG(); + case 8: + write_c0_watchlo7(0); + fallthrough; + case 7: + write_c0_watchlo6(0); + fallthrough; + case 6: + write_c0_watchlo5(0); + fallthrough; + case 5: + write_c0_watchlo4(0); + fallthrough; + case 4: + write_c0_watchlo3(0); + fallthrough; + case 3: + write_c0_watchlo2(0); + fallthrough; + case 2: + write_c0_watchlo1(0); + fallthrough; + case 1: + write_c0_watchlo0(0); + } +} + +void mips_probe_watch_registers(struct cpuinfo_mips *c) +{ + unsigned int t; + + if ((c->options & MIPS_CPU_WATCH) == 0) + return; + /* + * Check which of the I,R and W bits are supported, then + * disable the register. + */ + write_c0_watchlo0(MIPS_WATCHLO_IRW); + back_to_back_c0_hazard(); + t = read_c0_watchlo0(); + write_c0_watchlo0(0); + c->watch_reg_masks[0] = t & MIPS_WATCHLO_IRW; + + /* Write the mask bits and read them back to determine which + * can be used. */ + c->watch_reg_count = 1; + c->watch_reg_use_cnt = 1; + t = read_c0_watchhi0(); + write_c0_watchhi0(t | MIPS_WATCHHI_MASK); + back_to_back_c0_hazard(); + t = read_c0_watchhi0(); + c->watch_reg_masks[0] |= (t & MIPS_WATCHHI_MASK); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + write_c0_watchlo1(MIPS_WATCHLO_IRW); + back_to_back_c0_hazard(); + t = read_c0_watchlo1(); + write_c0_watchlo1(0); + c->watch_reg_masks[1] = t & MIPS_WATCHLO_IRW; + + c->watch_reg_count = 2; + c->watch_reg_use_cnt = 2; + t = read_c0_watchhi1(); + write_c0_watchhi1(t | MIPS_WATCHHI_MASK); + back_to_back_c0_hazard(); + t = read_c0_watchhi1(); + c->watch_reg_masks[1] |= (t & MIPS_WATCHHI_MASK); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + write_c0_watchlo2(MIPS_WATCHLO_IRW); + back_to_back_c0_hazard(); + t = read_c0_watchlo2(); + write_c0_watchlo2(0); + c->watch_reg_masks[2] = t & MIPS_WATCHLO_IRW; + + c->watch_reg_count = 3; + c->watch_reg_use_cnt = 3; + t = read_c0_watchhi2(); + write_c0_watchhi2(t | MIPS_WATCHHI_MASK); + back_to_back_c0_hazard(); + t = read_c0_watchhi2(); + c->watch_reg_masks[2] |= (t & MIPS_WATCHHI_MASK); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + write_c0_watchlo3(MIPS_WATCHLO_IRW); + back_to_back_c0_hazard(); + t = read_c0_watchlo3(); + write_c0_watchlo3(0); + c->watch_reg_masks[3] = t & MIPS_WATCHLO_IRW; + + c->watch_reg_count = 4; + c->watch_reg_use_cnt = 4; + t = read_c0_watchhi3(); + write_c0_watchhi3(t | MIPS_WATCHHI_MASK); + back_to_back_c0_hazard(); + t = read_c0_watchhi3(); + c->watch_reg_masks[3] |= (t & MIPS_WATCHHI_MASK); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + /* We use at most 4, but probe and report up to 8. */ + c->watch_reg_count = 5; + t = read_c0_watchhi4(); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + c->watch_reg_count = 6; + t = read_c0_watchhi5(); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + c->watch_reg_count = 7; + t = read_c0_watchhi6(); + if ((t & MIPS_WATCHHI_M) == 0) + return; + + c->watch_reg_count = 8; +} |