1 files changed, 311 insertions, 0 deletions
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
new file mode 100644
index 000000000..311dc1580
--- /dev/null
+++ b/arch/mips/loongson32/common/platform.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+#include <linux/phy.h>
+#include <linux/serial_8250.h>
+#include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
+
+#include <platform.h>
+#include <loongson1.h>
+#include <cpufreq.h>
+#include <dma.h>
+#include <nand.h>
+
+/* 8250/16550 compatible UART */
+#define LS1X_UART(_id)						\
+	{							\
+		.mapbase	= LS1X_UART ## _id ## _BASE,	\
+		.irq		= LS1X_UART ## _id ## _IRQ,	\
+		.iotype		= UPIO_MEM,			\
+		.flags		= UPF_IOREMAP | UPF_FIXED_TYPE, \
+		.type		= PORT_16550A,			\
+	}
+
+static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
+	LS1X_UART(0),
+	LS1X_UART(1),
+	LS1X_UART(2),
+	LS1X_UART(3),
+	{},
+};
+
+struct platform_device ls1x_uart_pdev = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data = ls1x_serial8250_pdata,
+	},
+};
+
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
+{
+	struct clk *clk;
+	struct plat_serial8250_port *p;
+
+	clk = clk_get(&pdev->dev, pdev->name);
+	if (IS_ERR(clk)) {
+		pr_err("unable to get %s clock, err=%ld",
+		       pdev->name, PTR_ERR(clk));
+		return;
+	}
+	clk_prepare_enable(clk);
+
+	for (p = pdev->dev.platform_data; p->flags != 0; ++p)
+		p->uartclk = clk_get_rate(clk);
+}
+
+/* CPUFreq */
+static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
+	.clk_name	= "cpu_clk",
+	.osc_clk_name	= "osc_clk",
+	.max_freq	= 266 * 1000,
+	.min_freq	= 33 * 1000,
+};
+
+struct platform_device ls1x_cpufreq_pdev = {
+	.name		= "ls1x-cpufreq",
+	.dev		= {
+		.platform_data = &ls1x_cpufreq_pdata,
+	},
+};
+
+/* Synopsys Ethernet GMAC */
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+	.phy_mask	= 0,
+};
+
+static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
+	.pbl		= 1,
+};
+
+int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
+{
+	struct plat_stmmacenet_data *plat_dat = NULL;
+	u32 val;
+
+	val = __raw_readl(LS1X_MUX_CTRL1);
+
+#if defined(CONFIG_LOONGSON1_LS1B)
+	plat_dat = dev_get_platdata(&pdev->dev);
+	if (plat_dat->bus_id) {
+		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
+			     GMAC1_USE_UART0, LS1X_MUX_CTRL0);
+		switch (plat_dat->phy_interface) {
+		case PHY_INTERFACE_MODE_RGMII:
+			val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+			break;
+		case PHY_INTERFACE_MODE_MII:
+			val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+			break;
+		default:
+			pr_err("unsupported mii mode %d\n",
+			       plat_dat->phy_interface);
+			return -ENOTSUPP;
+		}
+		val &= ~GMAC1_SHUT;
+	} else {
+		switch (plat_dat->phy_interface) {
+		case PHY_INTERFACE_MODE_RGMII:
+			val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+			break;
+		case PHY_INTERFACE_MODE_MII:
+			val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+			break;
+		default:
+			pr_err("unsupported mii mode %d\n",
+			       plat_dat->phy_interface);
+			return -ENOTSUPP;
+		}
+		val &= ~GMAC0_SHUT;
+	}
+	__raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+	plat_dat = dev_get_platdata(&pdev->dev);
+
+	val &= ~PHY_INTF_SELI;
+	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
+		val |= 0x4 << PHY_INTF_SELI_SHIFT;
+	__raw_writel(val, LS1X_MUX_CTRL1);
+
+	val = __raw_readl(LS1X_MUX_CTRL0);
+	__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
+
+	return 0;
+}
+
+static struct plat_stmmacenet_data ls1x_eth0_pdata = {
+	.bus_id			= 0,
+	.phy_addr		= -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+	.phy_interface		= PHY_INTERFACE_MODE_RMII,
+#endif
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth0_resources[] = {
+	[0] = {
+		.start	= LS1X_GMAC0_BASE,
+		.end	= LS1X_GMAC0_BASE + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "macirq",
+		.start	= LS1X_GMAC0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device ls1x_eth0_pdev = {
+	.name		= "stmmaceth",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ls1x_eth0_resources),
+	.resource	= ls1x_eth0_resources,
+	.dev		= {
+		.platform_data = &ls1x_eth0_pdata,
+	},
+};
+
+#ifdef CONFIG_LOONGSON1_LS1B
+static struct plat_stmmacenet_data ls1x_eth1_pdata = {
+	.bus_id			= 1,
+	.phy_addr		= -1,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+	.mdio_bus_data		= &ls1x_mdio_bus_data,
+	.dma_cfg		= &ls1x_eth_dma_cfg,
+	.has_gmac		= 1,
+	.tx_coe			= 1,
+	.rx_queues_to_use	= 1,
+	.tx_queues_to_use	= 1,
+	.init			= ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth1_resources[] = {
+	[0] = {
+		.start	= LS1X_GMAC1_BASE,
+		.end	= LS1X_GMAC1_BASE + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "macirq",
+		.start	= LS1X_GMAC1_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device ls1x_eth1_pdev = {
+	.name		= "stmmaceth",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ls1x_eth1_resources),
+	.resource	= ls1x_eth1_resources,
+	.dev		= {
+		.platform_data = &ls1x_eth1_pdata,
+	},
+};
+#endif	/* CONFIG_LOONGSON1_LS1B */
+
+/* GPIO */
+static struct resource ls1x_gpio0_resources[] = {
+	[0] = {
+		.start	= LS1X_GPIO0_BASE,
+		.end	= LS1X_GPIO0_BASE + SZ_4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device ls1x_gpio0_pdev = {
+	.name		= "ls1x-gpio",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ls1x_gpio0_resources),
+	.resource	= ls1x_gpio0_resources,
+};
+
+static struct resource ls1x_gpio1_resources[] = {
+	[0] = {
+		.start	= LS1X_GPIO1_BASE,
+		.end	= LS1X_GPIO1_BASE + SZ_4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device ls1x_gpio1_pdev = {
+	.name		= "ls1x-gpio",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ls1x_gpio1_resources),
+	.resource	= ls1x_gpio1_resources,
+};
+
+/* USB EHCI */
+static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ls1x_ehci_resources[] = {
+	[0] = {
+		.start	= LS1X_EHCI_BASE,
+		.end	= LS1X_EHCI_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= LS1X_EHCI_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
+struct platform_device ls1x_ehci_pdev = {
+	.name		= "ehci-platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ls1x_ehci_resources),
+	.resource	= ls1x_ehci_resources,
+	.dev		= {
+		.dma_mask = &ls1x_ehci_dmamask,
+		.platform_data = &ls1x_ehci_pdata,
+	},
+};
+
+/* Real Time Clock */
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
+{
+	u32 val = __raw_readl(LS1X_RTC_CTRL);
+
+	if (!(val & RTC_EXTCLK_OK))
+		__raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
+}
+
+struct platform_device ls1x_rtc_pdev = {
+	.name		= "ls1x-rtc",
+	.id		= -1,
+};
+
+/* Watchdog */
+static struct resource ls1x_wdt_resources[] = {
+	{
+		.start	= LS1X_WDT_BASE,
+		.end	= LS1X_WDT_BASE + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device ls1x_wdt_pdev = {
+	.name		= "ls1x-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ls1x_wdt_resources),
+	.resource	= ls1x_wdt_resources,
+};