diff options
Diffstat (limited to 'arch/mips/netlogic/xlp/nlm_hal.c')
-rw-r--r-- | arch/mips/netlogic/xlp/nlm_hal.c | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c new file mode 100644 index 000000000..25ee69489 --- /dev/null +++ b/arch/mips/netlogic/xlp/nlm_hal.c @@ -0,0 +1,508 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/delay.h> + +#include <asm/mipsregs.h> +#include <asm/time.h> + +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> +#include <asm/netlogic/xlp-hal/bridge.h> +#include <asm/netlogic/xlp-hal/pic.h> +#include <asm/netlogic/xlp-hal/sys.h> + +/* Main initialization */ +void nlm_node_init(int node) +{ + struct nlm_soc_info *nodep; + + nodep = nlm_get_node(node); + if (node == 0) + nodep->coremask = 1; /* node 0, boot cpu */ + nodep->sysbase = nlm_get_sys_regbase(node); + nodep->picbase = nlm_get_pic_regbase(node); + nodep->ebase = read_c0_ebase() & MIPS_EBASE_BASE; + if (cpu_is_xlp9xx()) + nodep->socbus = xlp9xx_get_socbus(node); + else + nodep->socbus = 0; + spin_lock_init(&nodep->piclock); +} + +static int xlp9xx_irq_to_irt(int irq) +{ + switch (irq) { + case PIC_GPIO_IRQ: + return 12; + case PIC_I2C_0_IRQ: + return 125; + case PIC_I2C_1_IRQ: + return 126; + case PIC_I2C_2_IRQ: + return 127; + case PIC_I2C_3_IRQ: + return 128; + case PIC_9XX_XHCI_0_IRQ: + return 114; + case PIC_9XX_XHCI_1_IRQ: + return 115; + case PIC_9XX_XHCI_2_IRQ: + return 116; + case PIC_UART_0_IRQ: + return 133; + case PIC_UART_1_IRQ: + return 134; + case PIC_SATA_IRQ: + return 143; + case PIC_NAND_IRQ: + return 151; + case PIC_SPI_IRQ: + return 152; + case PIC_MMC_IRQ: + return 153; + case PIC_PCIE_LINK_LEGACY_IRQ(0): + case PIC_PCIE_LINK_LEGACY_IRQ(1): + case PIC_PCIE_LINK_LEGACY_IRQ(2): + case PIC_PCIE_LINK_LEGACY_IRQ(3): + return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE; + } + return -1; +} + +static int xlp_irq_to_irt(int irq) +{ + uint64_t pcibase; + int devoff, irt; + + devoff = 0; + switch (irq) { + case PIC_UART_0_IRQ: + devoff = XLP_IO_UART0_OFFSET(0); + break; + case PIC_UART_1_IRQ: + devoff = XLP_IO_UART1_OFFSET(0); + break; + case PIC_MMC_IRQ: + devoff = XLP_IO_MMC_OFFSET(0); + break; + case PIC_I2C_0_IRQ: /* I2C will be fixed up */ + case PIC_I2C_1_IRQ: + case PIC_I2C_2_IRQ: + case PIC_I2C_3_IRQ: + if (cpu_is_xlpii()) + devoff = XLP2XX_IO_I2C_OFFSET(0); + else + devoff = XLP_IO_I2C0_OFFSET(0); + break; + case PIC_SATA_IRQ: + devoff = XLP_IO_SATA_OFFSET(0); + break; + case PIC_GPIO_IRQ: + devoff = XLP_IO_GPIO_OFFSET(0); + break; + case PIC_NAND_IRQ: + devoff = XLP_IO_NAND_OFFSET(0); + break; + case PIC_SPI_IRQ: + devoff = XLP_IO_SPI_OFFSET(0); + break; + default: + if (cpu_is_xlpii()) { + switch (irq) { + /* XLP2XX has three XHCI USB controller */ + case PIC_2XX_XHCI_0_IRQ: + devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0); + break; + case PIC_2XX_XHCI_1_IRQ: + devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0); + break; + case PIC_2XX_XHCI_2_IRQ: + devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0); + break; + } + } else { + switch (irq) { + case PIC_EHCI_0_IRQ: + devoff = XLP_IO_USB_EHCI0_OFFSET(0); + break; + case PIC_EHCI_1_IRQ: + devoff = XLP_IO_USB_EHCI1_OFFSET(0); + break; + case PIC_OHCI_0_IRQ: + devoff = XLP_IO_USB_OHCI0_OFFSET(0); + break; + case PIC_OHCI_1_IRQ: + devoff = XLP_IO_USB_OHCI1_OFFSET(0); + break; + case PIC_OHCI_2_IRQ: + devoff = XLP_IO_USB_OHCI2_OFFSET(0); + break; + case PIC_OHCI_3_IRQ: + devoff = XLP_IO_USB_OHCI3_OFFSET(0); + break; + } + } + } + + if (devoff != 0) { + uint32_t val; + + pcibase = nlm_pcicfg_base(devoff); + val = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG); + if (val == 0xffffffff) { + irt = -1; + } else { + irt = val & 0xffff; + /* HW weirdness, I2C IRT entry has to be fixed up */ + switch (irq) { + case PIC_I2C_1_IRQ: + irt = irt + 1; break; + case PIC_I2C_2_IRQ: + irt = irt + 2; break; + case PIC_I2C_3_IRQ: + irt = irt + 3; break; + } + } + } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) && + irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) { + /* HW bug, PCI IRT entries are bad on early silicon, fix */ + irt = PIC_IRT_PCIE_LINK_INDEX(irq - + PIC_PCIE_LINK_LEGACY_IRQ_BASE); + } else { + irt = -1; + } + return irt; +} + +int nlm_irq_to_irt(int irq) +{ + /* return -2 for irqs without 1-1 mapping */ + if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3)) + return -2; + if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3)) + return -2; + + if (cpu_is_xlp9xx()) + return xlp9xx_irq_to_irt(irq); + else + return xlp_irq_to_irt(irq); +} + +static unsigned int nlm_xlp2_get_core_frequency(int node, int core) +{ + unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom; + uint64_t num, sysbase, clockbase; + + if (cpu_is_xlp9xx()) { + clockbase = nlm_get_clock_regbase(node); + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_CPU_PLL_CTRL0(core)); + ctrl_val1 = nlm_read_sys_reg(clockbase, + SYS_9XX_CPU_PLL_CTRL1(core)); + } else { + sysbase = nlm_get_node(node)->sysbase; + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_CPU_PLL_CTRL0(core)); + ctrl_val1 = nlm_read_sys_reg(sysbase, + SYS_CPU_PLL_CTRL1(core)); + } + + /* Find PLL post divider value */ + switch ((ctrl_val0 >> 24) & 0x7) { + case 1: + pll_post_div = 2; + break; + case 3: + pll_post_div = 4; + break; + case 7: + pll_post_div = 8; + break; + case 6: + pll_post_div = 16; + break; + case 0: + default: + pll_post_div = 1; + break; + } + + num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f)); + denom = 3 * pll_post_div; + do_div(num, denom); + + return (unsigned int)num; +} + +static unsigned int nlm_xlp_get_core_frequency(int node, int core) +{ + unsigned int pll_divf, pll_divr, dfs_div, ext_div; + unsigned int rstval, dfsval, denom; + uint64_t num, sysbase; + + sysbase = nlm_get_node(node)->sysbase; + rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG); + dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE); + pll_divf = ((rstval >> 10) & 0x7f) + 1; + pll_divr = ((rstval >> 8) & 0x3) + 1; + ext_div = ((rstval >> 30) & 0x3) + 1; + dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1; + + num = 800000000ULL * pll_divf; + denom = 3 * pll_divr * ext_div * dfs_div; + do_div(num, denom); + + return (unsigned int)num; +} + +unsigned int nlm_get_core_frequency(int node, int core) +{ + if (cpu_is_xlpii()) + return nlm_xlp2_get_core_frequency(node, core); + else + return nlm_xlp_get_core_frequency(node, core); +} + +/* + * Calculate PIC frequency from PLL registers. + * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) / + * ((2^ctrl0[7:5]) * Table(ctrl0[26:24])) + */ +static unsigned int nlm_xlp2_get_pic_frequency(int node) +{ + u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx; + u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div; + u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk; + + sysbase = nlm_get_node(node)->sysbase; + clockbase = nlm_get_clock_regbase(node); + cpu_xlp9xx = cpu_is_xlp9xx(); + + /* Find ref_clk_base */ + if (cpu_xlp9xx) + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3; + else + ref_clk_select = (nlm_read_sys_reg(sysbase, + SYS_POWER_ON_RESET_CFG) >> 18) & 0x3; + switch (ref_clk_select) { + case 0: + ref_clk = 200000000ULL; + ref_div = 3; + break; + case 1: + ref_clk = 100000000ULL; + ref_div = 1; + break; + case 2: + ref_clk = 125000000ULL; + ref_div = 1; + break; + case 3: + ref_clk = 400000000ULL; + ref_div = 3; + break; + } + + /* Find the clock source PLL device for PIC */ + if (cpu_xlp9xx) { + reg_select = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_SEL_REG) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(clockbase, + SYS_9XX_PLL_CTRL2_DEVX(2)); + break; + } + } else { + reg_select = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_SEL_REG) >> 22) & 0x3; + switch (reg_select) { + case 0: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2); + break; + case 1: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(0)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(0)); + break; + case 2: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(1)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(1)); + break; + case 3: + ctrl_val0 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL0_DEVX(2)); + ctrl_val2 = nlm_read_sys_reg(sysbase, + SYS_PLL_CTRL2_DEVX(2)); + break; + } + } + + vco_post_div = (ctrl_val0 >> 5) & 0x7; + pll_post_div = (ctrl_val0 >> 24) & 0x7; + mdiv = ctrl_val2 & 0xff; + fdiv = (ctrl_val2 >> 8) & 0x1fff; + + /* Find PLL post divider value */ + switch (pll_post_div) { + case 1: + pll_post_div = 2; + break; + case 3: + pll_post_div = 4; + break; + case 7: + pll_post_div = 8; + break; + case 6: + pll_post_div = 16; + break; + case 0: + default: + pll_post_div = 1; + break; + } + + fdiv = fdiv/(1 << 13); + pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv; + pll_out_freq_den = (1 << vco_post_div) * pll_post_div * ref_div; + + if (pll_out_freq_den > 0) + do_div(pll_out_freq_num, pll_out_freq_den); + + /* PIC post divider, which happens after PLL */ + if (cpu_xlp9xx) + pic_div = nlm_read_sys_reg(clockbase, + SYS_9XX_CLK_DEV_DIV_REG) & 0x3; + else + pic_div = (nlm_read_sys_reg(sysbase, + SYS_CLK_DEV_DIV_REG) >> 22) & 0x3; + do_div(pll_out_freq_num, 1 << pic_div); + + return pll_out_freq_num; +} + +unsigned int nlm_get_pic_frequency(int node) +{ + if (cpu_is_xlpii()) + return nlm_xlp2_get_pic_frequency(node); + else + return 133333333; +} + +unsigned int nlm_get_cpu_frequency(void) +{ + return nlm_get_core_frequency(0, 0); +} + +/* + * Fills upto 8 pairs of entries containing the DRAM map of a node + * if node < 0, get dram map for all nodes + */ +int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries) +{ + uint64_t bridgebase, base, lim; + uint32_t val; + unsigned int barreg, limreg, xlatreg; + int i, n, rv; + + /* Look only at mapping on Node 0, we don't handle crazy configs */ + bridgebase = nlm_get_bridge_regbase(0); + rv = 0; + for (i = 0; i < 8; i++) { + if (rv + 1 >= nentries) + break; + if (cpu_is_xlp9xx()) { + barreg = BRIDGE_9XX_DRAM_BAR(i); + limreg = BRIDGE_9XX_DRAM_LIMIT(i); + xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i); + } else { + barreg = BRIDGE_DRAM_BAR(i); + limreg = BRIDGE_DRAM_LIMIT(i); + xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i); + } + if (node >= 0) { + /* node specified, get node mapping of BAR */ + val = nlm_read_bridge_reg(bridgebase, xlatreg); + n = (val >> 1) & 0x3; + if (n != node) + continue; + } + val = nlm_read_bridge_reg(bridgebase, barreg); + val = (val >> 12) & 0xfffff; + base = (uint64_t) val << 20; + val = nlm_read_bridge_reg(bridgebase, limreg); + val = (val >> 12) & 0xfffff; + if (val == 0) /* BAR not used */ + continue; + lim = ((uint64_t)val + 1) << 20; + dram_map[rv] = base; + dram_map[rv + 1] = lim; + rv += 2; + } + return rv; +} |